Merge misc fixes from Andrew Morton:
"14 patches.
Subsystems affected by this patch series: mm (hugetlb, kasan, gup,
selftests, z3fold, kfence, memblock, and highmem), squashfs, ia64,
gcov, and mailmap"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mailmap: update Andrey Konovalov's email address
mm/highmem: fix CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP
mm: memblock: fix section mismatch warning again
kfence: make compatible with kmemleak
gcov: fix clang-11+ support
ia64: fix format strings for err_inject
ia64: mca: allocate early mca with GFP_ATOMIC
squashfs: fix xattr id and id lookup sanity checks
squashfs: fix inode lookup sanity checks
z3fold: prevent reclaim/free race for headless pages
selftests/vm: fix out-of-tree build
mm/mmu_notifiers: ensure range_end() is paired with range_start()
kasan: fix per-page tags for non-page_alloc pages
hugetlb_cgroup: fix imbalanced css_get and css_put pair for shared mappings
- Typo causing a regression in mlx5 devx
- Regression in the recent hns rework causing the HW to get out of sync
- Longstanding cxgb4 adaptor crash when destroying cm ids
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEfB7FMLh+8QxL+6i3OG33FX4gmxoFAmBcxe0ACgkQOG33FX4g
mxruFQ/+JMfHtWowI9l32N+SI93zWAQVN6bcO5XiUeziCLEsktU2dh5Lu8ZWWVmB
BX1US24oBuGKs+YNx1ayshlgQj7EgojnGZODGtL4O157IvvgMrm4gFN84EoN3gMA
8QzPVgZrrvyjDc8tSEINAW5crkpmhqdeg6XYM9BTUrVLqy+rXWv6V5E8Gnvtexmq
h/+UgbIxW00SVVxpNyAFeuu1IlbgSYU0DvU4xpha/XKX6Ifyl9SeKmn6y+1UEU4q
AYd/6UuYvK26G8tA3Zteh3lR8cUiLeorIwB6B5WoMDZXhyBz+PhaBS2ypHsrrnyr
IIEDres5/zEm355nT8j0hTMv40ZUlj4UFRf2eWqcdrLD54yb6n8g4X2rmsASoe1A
Z3CrhkV39dPEsB7JXmGB9j6W47PWGYBYUGpYTMRr69K7eB3viDIC+i6fDK7eKS0e
u+fO3K9kU2B/PSJvWVCPKn2GCOw3jRuqwbTFUt0kvo8E90yzV6yqjgyoTKt+PgBn
t0SUyPEGue+KEKgJd/sp62OL8LPulFksx+E7ksvqqbmSTNAjH+bs/FrbUYoN0r3v
kmkxgxLzipu1aYtLwcAtNJpEya3c6s4ERBFeJMk01xUkiiWPG9RLa66Zg2IzDqWW
J55irlJIqBm792vB+vH7+FHU3YjEGh66ycGRqsBWiw2oUxmlxEc=
=vjhp
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"Not much going on, just some small bug fixes:
- Typo causing a regression in mlx5 devx
- Regression in the recent hns rework causing the HW to get out of
sync
- Long-standing cxgb4 adaptor crash when destroying cm ids"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/cxgb4: Fix adapter LE hash errors while destroying ipv6 listening server
RDMA/hns: Fix bug during CMDQ initialization
RDMA/mlx5: Fix typo in destroy_mkey inbox
- Fix possible memory hotplug failure with KASLR
- Fix FFR value in SVE kselftest
- Fix backtraces reported in /proc/$pid/stack
- Disable broken CnP implementation on NVIDIA Carmel
- Typo fixes and ACPI documentation clarification
- Fix some W=1 warnings
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmBccr0QHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNG6UCACDbz3BO/y40wRhWwMhvDhyFDqtlTlVEQlb
hxnJzksXOlbqHB1J7yamzXxS1UlCBlhvjrFNTe1s5LJIfB0niMskYLe2p0dJ/voi
WyysvaiK7/1bZV/RRdF7r+hFtMPHBEAKfgs+ZxFN9mnMcserV8PWqiD5ookCqavE
xatE/fEgVujiISl/BOkP1pnmWnPM4f9BIMS5DgaZJsNDYtxeu9a3RGnfu9vNHaP2
gxq5+E3BjZfh1z0++HP6nTuDbdDaxEz12gyoZ+4wejXVhwj1g7NySJNa8RmJG9pU
gX+jE6HOgeCFIEe9Gx+I2QtAaFia96HVnAAHagGBHB1vfV7GTRxN
=tzbO
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"Minor fixes all over, ranging from typos to tests to errata
workarounds:
- Fix possible memory hotplug failure with KASLR
- Fix FFR value in SVE kselftest
- Fix backtraces reported in /proc/$pid/stack
- Disable broken CnP implementation on NVIDIA Carmel
- Typo fixes and ACPI documentation clarification
- Fix some W=1 warnings"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: kernel: disable CNP on Carmel
arm64/process.c: fix Wmissing-prototypes build warnings
kselftest/arm64: sve: Do not use non-canonical FFR register value
arm64: mm: correct the inside linear map range during hotplug check
arm64: kdump: update ppos when reading elfcorehdr
arm64: cpuinfo: Fix a typo
Documentation: arm64/acpi : clarify arm64 support of IBFT
arm64: stacktrace: don't trace arch_stack_walk()
arm64: csum: cast to the proper type
Redirect my older email addresses in the git logs.
Signed-off-by: Chris Chiu <chris.chiu@canonical.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The kernel test robot found that __kmap_local_sched_out() was not
correctly skipping the guard pages when DEBUG_KMAP_LOCAL_FORCE_MAP was
set.[1] This was due to DEBUG_HIGHMEM check being used.
Change the configuration check to be correct.
[1] https://lore.kernel.org/lkml/20210304083825.GB17830@xsang-OptiPlex-9020/
Link: https://lkml.kernel.org/r/20210318230657.1497881-1-ira.weiny@intel.com
Fixes: 0e91a0c698 ("mm/highmem: Provide CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP")
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Oliver Sang <oliver.sang@intel.com>
Cc: Chaitanya Kulkarni <Chaitanya.Kulkarni@wdc.com>
Cc: David Sterba <dsterba@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 34dc2efb39 ("memblock: fix section mismatch warning") marked
memblock_bottom_up() and memblock_set_bottom_up() as __init, but they
could be referenced from non-init functions like
memblock_find_in_range_node() on architectures that enable
CONFIG_ARCH_KEEP_MEMBLOCK.
For such builds kernel test robot reports:
WARNING: modpost: vmlinux.o(.text+0x74fea4): Section mismatch in reference from the function memblock_find_in_range_node() to the function .init.text:memblock_bottom_up()
The function memblock_find_in_range_node() references the function __init memblock_bottom_up().
This is often because memblock_find_in_range_node lacks a __init annotation or the annotation of memblock_bottom_up is wrong.
Replace __init annotations with __init_memblock annotations so that the
appropriate section will be selected depending on
CONFIG_ARCH_KEEP_MEMBLOCK.
Link: https://lore.kernel.org/lkml/202103160133.UzhgY0wt-lkp@intel.com
Link: https://lkml.kernel.org/r/20210316171347.14084-1-rppt@kernel.org
Fixes: 34dc2efb39 ("memblock: fix section mismatch warning")
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Because memblock allocations are registered with kmemleak, the KFENCE
pool was seen by kmemleak as one large object. Later allocations
through kfence_alloc() that were registered with kmemleak via
slab_post_alloc_hook() would then overlap and trigger a warning.
Therefore, once the pool is initialized, we can remove (free) it from
kmemleak again, since it should be treated as allocator-internal and be
seen as "free memory".
The second problem is that kmemleak is passed the rounded size, and not
the originally requested size, which is also the size of KFENCE objects.
To avoid kmemleak scanning past the end of an object and trigger a
KFENCE out-of-bounds error, fix the size if it is a KFENCE object.
For simplicity, to avoid a call to kfence_ksize() in
slab_post_alloc_hook() (and avoid new IS_ENABLED(CONFIG_DEBUG_KMEMLEAK)
guard), just call kfence_ksize() in mm/kmemleak.c:create_object().
Link: https://lkml.kernel.org/r/20210317084740.3099921-1-elver@google.com
Signed-off-by: Marco Elver <elver@google.com>
Reported-by: Luis Henriques <lhenriques@suse.de>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Luis Henriques <lhenriques@suse.de>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
LLVM changed the expected function signatures for llvm_gcda_start_file()
and llvm_gcda_emit_function() in the clang-11 release. Users of
clang-11 or newer may have noticed their kernels failing to boot due to
a panic when enabling CONFIG_GCOV_KERNEL=y +CONFIG_GCOV_PROFILE_ALL=y.
Fix up the function signatures so calling these functions doesn't panic
the kernel.
Link: https://reviews.llvm.org/rGcdd683b516d147925212724b09ec6fb792a40041
Link: https://reviews.llvm.org/rG13a633b438b6500ecad9e4f936ebadf3411d0f44
Link: https://lkml.kernel.org/r/20210312224132.3413602-2-ndesaulniers@google.com
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reported-by: Prasad Sodagudi <psodagud@quicinc.com>
Suggested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Fangrui Song <maskray@google.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Cc: <stable@vger.kernel.org> [5.4+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix warning with %lx / u64 mismatch:
arch/ia64/kernel/err_inject.c: In function 'show_resources':
arch/ia64/kernel/err_inject.c:62:22: warning:
format '%lx' expects argument of type 'long unsigned int',
but argument 3 has type 'u64' {aka 'long long unsigned int'}
62 | return sprintf(buf, "%lx", name[cpu]); \
| ^~~~~~~
Link: https://lkml.kernel.org/r/20210313104312.1548232-1-slyfox@gentoo.org
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The sleep warning happens at early boot right at secondary CPU
activation bootup:
smp: Bringing up secondary CPUs ...
BUG: sleeping function called from invalid context at mm/page_alloc.c:4942
in_atomic(): 0, irqs_disabled(): 1, non_block: 0, pid: 0, name: swapper/1
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.12.0-rc2-00007-g79e228d0b611-dirty #99
..
Call Trace:
show_stack+0x90/0xc0
dump_stack+0x150/0x1c0
___might_sleep+0x1c0/0x2a0
__might_sleep+0xa0/0x160
__alloc_pages_nodemask+0x1a0/0x600
alloc_page_interleave+0x30/0x1c0
alloc_pages_current+0x2c0/0x340
__get_free_pages+0x30/0xa0
ia64_mca_cpu_init+0x2d0/0x3a0
cpu_init+0x8b0/0x1440
start_secondary+0x60/0x700
start_ap+0x750/0x780
Fixed BSP b0 value from CPU 1
As I understand interrupts are not enabled yet and system has a lot of
memory. There is little chance to sleep and switch to GFP_ATOMIC should
be a no-op.
Link: https://lkml.kernel.org/r/20210315085045.204414-1-slyfox@gentoo.org
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The checks for maximum metadata block size is missing
SQUASHFS_BLOCK_OFFSET (the two byte length count).
Link: https://lkml.kernel.org/r/2069685113.2081245.1614583677427@webmail.123-reg.co.uk
Fixes: f37aa4c736 ("squashfs: add more sanity checks in id lookup")
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Cc: Sean Nyekjaer <sean@geanix.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When mouting a squashfs image created without inode compression it fails
with: "unable to read inode lookup table"
It turns out that the BLOCK_OFFSET is missing when checking the
SQUASHFS_METADATA_SIZE agaist the actual size.
Link: https://lkml.kernel.org/r/20210226092903.1473545-1-sean@geanix.com
Fixes: eabac19e40 ("squashfs: add more sanity checks in inode lookup")
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Acked-by: Phillip Lougher <phillip@squashfs.org.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When building out-of-tree, attempting to make target from $(OUTPUT) directory:
make[1]: *** No rule to make target '$(OUTPUT)/protection_keys.c', needed by '$(OUTPUT)/protection_keys_32'.
Link: https://lkml.kernel.org/r/20210315094700.522753-1-rong.a.chen@intel.com
Signed-off-by: Rong Chen <rong.a.chen@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If one or more notifiers fails .invalidate_range_start(), invoke
.invalidate_range_end() for "all" notifiers. If there are multiple
notifiers, those that did not fail are expecting _start() and _end() to
be paired, e.g. KVM's mmu_notifier_count would become imbalanced.
Disallow notifiers that can fail _start() from implementing _end() so
that it's unnecessary to either track which notifiers rejected _start(),
or had already succeeded prior to a failed _start().
Note, the existing behavior of calling _start() on all notifiers even
after a previous notifier failed _start() was an unintented "feature".
Make it canon now that the behavior is depended on for correctness.
As of today, the bug is likely benign:
1. The only caller of the non-blocking notifier is OOM kill.
2. The only notifiers that can fail _start() are the i915 and Nouveau
drivers.
3. The only notifiers that utilize _end() are the SGI UV GRU driver
and KVM.
4. The GRU driver will never coincide with the i195/Nouveau drivers.
5. An imbalanced kvm->mmu_notifier_count only causes soft lockup in the
_guest_, and the guest is already doomed due to being an OOM victim.
Fix the bug now to play nice with future usage, e.g. KVM has a
potential use case for blocking memslot updates in KVM while an
invalidation is in-progress, and failure to unblock would result in said
updates being blocked indefinitely and hanging.
Found by inspection. Verified by adding a second notifier in KVM that
periodically returns -EAGAIN on non-blockable ranges, triggering OOM,
and observing that KVM exits with an elevated notifier count.
Link: https://lkml.kernel.org/r/20210311180057.1582638-1-seanjc@google.com
Fixes: 93065ac753 ("mm, oom: distinguish blockable mode for mmu notifiers")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Suggested-by: Jason Gunthorpe <jgg@ziepe.ca>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ben Gardon <bgardon@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
To allow performing tag checks on page_alloc addresses obtained via
page_address(), tag-based KASAN modes store tags for page_alloc
allocations in page->flags.
Currently, the default tag value stored in page->flags is 0x00.
Therefore, page_address() returns a 0x00ffff... address for pages that
were not allocated via page_alloc.
This might cause problems. A particular case we encountered is a
conflict with KFENCE. If a KFENCE-allocated slab object is being freed
via kfree(page_address(page) + offset), the address passed to kfree()
will get tagged with 0x00 (as slab pages keep the default per-page
tags). This leads to is_kfence_address() check failing, and a KFENCE
object ending up in normal slab freelist, which causes memory
corruptions.
This patch changes the way KASAN stores tag in page-flags: they are now
stored xor'ed with 0xff. This way, KASAN doesn't need to initialize
per-page flags for every created page, which might be slow.
With this change, page_address() returns natively-tagged (with 0xff)
pointers for pages that didn't have tags set explicitly.
This patch fixes the encountered conflict with KFENCE and prevents more
similar issues that can occur in the future.
Link: https://lkml.kernel.org/r/1a41abb11c51b264511d9e71c303bb16d5cb367b.1615475452.git.andreyknvl@google.com
Fixes: 2813b9c029 ("kasan, mm, arm64: tag non slab memory allocated via pagealloc")
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The current implementation of hugetlb_cgroup for shared mappings could
have different behavior. Consider the following two scenarios:
1.Assume initial css reference count of hugetlb_cgroup is 1:
1.1 Call hugetlb_reserve_pages with from = 1, to = 2. So css reference
count is 2 associated with 1 file_region.
1.2 Call hugetlb_reserve_pages with from = 2, to = 3. So css reference
count is 3 associated with 2 file_region.
1.3 coalesce_file_region will coalesce these two file_regions into
one. So css reference count is 3 associated with 1 file_region
now.
2.Assume initial css reference count of hugetlb_cgroup is 1 again:
2.1 Call hugetlb_reserve_pages with from = 1, to = 3. So css reference
count is 2 associated with 1 file_region.
Therefore, we might have one file_region while holding one or more css
reference counts. This inconsistency could lead to imbalanced css_get()
and css_put() pair. If we do css_put one by one (i.g. hole punch case),
scenario 2 would put one more css reference. If we do css_put all
together (i.g. truncate case), scenario 1 will leak one css reference.
The imbalanced css_get() and css_put() pair would result in a non-zero
reference when we try to destroy the hugetlb cgroup. The hugetlb cgroup
directory is removed __but__ associated resource is not freed. This
might result in OOM or can not create a new hugetlb cgroup in a busy
workload ultimately.
In order to fix this, we have to make sure that one file_region must
hold exactly one css reference. So in coalesce_file_region case, we
should release one css reference before coalescence. Also only put css
reference when the entire file_region is removed.
The last thing to note is that the caller of region_add() will only hold
one reference to h_cg->css for the whole contiguous reservation region.
But this area might be scattered when there are already some
file_regions reside in it. As a result, many file_regions may share only
one h_cg->css reference. In order to ensure that one file_region must
hold exactly one css reference, we should do css_get() for each
file_region and release the reference held by caller when they are done.
[linmiaohe@huawei.com: fix imbalanced css_get and css_put pair for shared mappings]
Link: https://lkml.kernel.org/r/20210316023002.53921-1-linmiaohe@huawei.com
Link: https://lkml.kernel.org/r/20210301120540.37076-1-linmiaohe@huawei.com
Fixes: 075a61d07a ("hugetlb_cgroup: add accounting for shared mappings")
Reported-by: kernel test robot <lkp@intel.com> (auto build test ERROR)
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Wanpeng Li <liwp.linux@gmail.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Not setting the ipv6 bit while destroying ipv6 listening servers may
result in potential fatal adapter errors due to lookup engine memory hash
errors. Therefore always set ipv6 field while destroying ipv6 listening
servers.
Fixes: 830662f6f0 ("RDMA/cxgb4: Add support for active and passive open connection with IPv6 address")
Link: https://lore.kernel.org/r/20210324190453.8171-1-bharat@chelsio.com
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
On NVIDIA Carmel cores, CNP behaves differently than it does on standard
ARM cores. On Carmel, if two cores have CNP enabled and share an L2 TLB
entry created by core0 for a specific ASID, a non-shareable TLBI from
core1 may still see the shared entry. On standard ARM cores, that TLBI
will invalidate the shared entry as well.
This causes issues with patchsets that attempt to do local TLBIs based
on cpumasks instead of broadcast TLBIs. Avoid these issues by disabling
CNP support for NVIDIA Carmel cores.
Signed-off-by: Rich Wiley <rwiley@nvidia.com>
Link: https://lore.kernel.org/r/20210324002809.30271-1-rwiley@nvidia.com
[will: Fix pre-existing whitespace issue]
Signed-off-by: Will Deacon <will@kernel.org>
Pull networking fixes from David Miller:
"Various fixes, all over:
1) Fix overflow in ptp_qoriq_adjfine(), from Yangbo Lu.
2) Always store the rx queue mapping in veth, from Maciej
Fijalkowski.
3) Don't allow vmlinux btf in map_create, from Alexei Starovoitov.
4) Fix memory leak in octeontx2-af from Colin Ian King.
5) Use kvalloc in bpf x86 JIT for storing jit'd addresses, from
Yonghong Song.
6) Fix tx ptp stats in mlx5, from Aya Levin.
7) Check correct ip version in tun decap, fropm Roi Dayan.
8) Fix rate calculation in mlx5 E-Switch code, from arav Pandit.
9) Work item memork leak in mlx5, from Shay Drory.
10) Fix ip6ip6 tunnel crash with bpf, from Daniel Borkmann.
11) Lack of preemptrion awareness in macvlan, from Eric Dumazet.
12) Fix data race in pxa168_eth, from Pavel Andrianov.
13) Range validate stab in red_check_params(), from Eric Dumazet.
14) Inherit vlan filtering setting properly in b53 driver, from
Florian Fainelli.
15) Fix rtnl locking in igc driver, from Sasha Neftin.
16) Pause handling fixes in igc driver, from Muhammad Husaini
Zulkifli.
17) Missing rtnl locking in e1000_reset_task, from Vitaly Lifshits.
18) Use after free in qlcnic, from Lv Yunlong.
19) fix crash in fritzpci mISDN, from Tong Zhang.
20) Premature rx buffer reuse in igb, from Li RongQing.
21) Missing termination of ip[a driver message handler arrays, from
Alex Elder.
22) Fix race between "x25_close" and "x25_xmit"/"x25_rx" in hdlc_x25
driver, from Xie He.
23) Use after free in c_can_pci_remove(), from Tong Zhang.
24) Uninitialized variable use in nl80211, from Jarod Wilson.
25) Off by one size calc in bpf verifier, from Piotr Krysiuk.
26) Use delayed work instead of deferrable for flowtable GC, from
Yinjun Zhang.
27) Fix infinite loop in NPC unmap of octeontx2 driver, from
Hariprasad Kelam.
28) Fix being unable to change MTU of dwmac-sun8i devices due to lack
of fifo sizes, from Corentin Labbe.
29) DMA use after free in r8169 with WoL, fom Heiner Kallweit.
30) Mismatched prototypes in isdn-capi, from Arnd Bergmann.
31) Fix psample UAPI breakage, from Ido Schimmel"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (171 commits)
psample: Fix user API breakage
math: Export mul_u64_u64_div_u64
ch_ktls: fix enum-conversion warning
octeontx2-af: Fix memory leak of object buf
ptp_qoriq: fix overflow in ptp_qoriq_adjfine() u64 calcalation
net: bridge: don't notify switchdev for local FDB addresses
net/sched: act_ct: clear post_ct if doing ct_clear
net: dsa: don't assign an error value to tag_ops
isdn: capi: fix mismatched prototypes
net/mlx5: SF, do not use ecpu bit for vhca state processing
net/mlx5e: Fix division by 0 in mlx5e_select_queue
net/mlx5e: Fix error path for ethtool set-priv-flag
net/mlx5e: Offload tuple rewrite for non-CT flows
net/mlx5e: Allow to match on MPLS parameters only for MPLS over UDP
net/mlx5: Add back multicast stats for uplink representor
net: ipconfig: ic_dev can be NULL in ic_close_devs
MAINTAINERS: Combine "QLOGIC QLGE 10Gb ETHERNET DRIVER" sections into one
docs: networking: Fix a typo
r8169: fix DMA being used after buffer free if WoL is enabled
net: ipa: fix init header command validation
...
With extra warnings enabled, gcc complains that snprintf should not
take the same buffer as source and destination:
drivers/net/ethernet/huawei/hinic/hinic_ethtool.c: In function 'hinic_set_settings_to_hw':
drivers/net/ethernet/huawei/hinic/hinic_ethtool.c:480:9: error: 'snprintf' argument 4 overlaps destination object 'set_link_str' [-Werror=restrict]
480 | err = snprintf(set_link_str, SET_LINK_STR_MAX_LEN,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
481 | "%sspeed %d ", set_link_str, speed);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/huawei/hinic/hinic_ethtool.c:464:7: note: destination object referenced by 'restrict'-qualified argument 1 was declared here
464 | char set_link_str[SET_LINK_STR_MAX_LEN] = {0};
Rewrite this to avoid the nested sprintf and instead use separate
buffers, which is simpler.
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
In order to discover whether remote station supports frame preemption,
local station sends verify mPacket and expects response mPacket in
return from the remote station.
So, we add the functions to send and handle event when verify mPacket
and response mPacket are exchanged between the networked stations.
The mechanism to handle different FPE states between local and remote
station (link partner) is implemented using workqueue which starts a
task each time there is some sign of verify & response mPacket exchange
as check in FPE IRQ event. The task retries couple of times to try to
spot the states that both stations are ready to enter FPE ON. This allows
different end points to enable FPE at different time and verify-response
mPacket can happen asynchronously. Ultimately, the task will only turn
FPE ON when local station have both exchange response in both directions.
Thanks to Voon Weifeng for implementing the core functions for detecting
FPE events and send mPacket and phylink related change.
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Co-developed-by: Voon Weifeng <weifeng.voon@intel.com>
Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
Co-developed-by: Tan Tee Min <tee.min.tan@intel.com>
Signed-off-by: Tan Tee Min <tee.min.tan@intel.com>
Co-developed-by: Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com>
Signed-off-by: Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
s/Orignal/Original/
s/infered/inferred/
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
s/sequencially/sequentially/
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
s/beggining/beginning/
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alex Elder says:
====================
net: ipa: versions and registers
Version 2 of this series adds kernel-doc descriptions for all
members of the ipa_version enumerated type in patch 2.
The original description of the series is below.
-Alex
This series is sort of a mix of things, generally related to
updating IPA versions and register definitions.
The first patch fixes some version-related tests throughout the code
so the conditions are valid for IPA versions other than the two that
are currently supported. Support for additional versions is
forthcoming, and this is a preparatory step.
The second patch adds to the set of defined IPA versions, to include
all versions between 3.0 and 4.11.
The next defines an endpoint initialization register that was
previously not being configured. We now initialize that register
(so that NAT is explicitly disabled) on all AP endpoints.
The fourth adds support for an extra bit in a field in a register,
which is present starting at IPA v4.5.
The last two are sort of standalone. One just moves a function
definition and makes it private. The other increases the number of
GSI channels and events supported by the driver, sufficient for IPA
v4.5.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Increase the maximum number of channels and event rings supported by
the driver, to allow the maximum available on the SDX55.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
We only use ipa_aggr_granularity_val() inside "ipa_main.c", so it
doesn't really need to be defined in a header file. It makes some
sense to be grouped with the register definitions, but it is unlike
the other inline functions now defined in "ipa_reg.h". So move it
into "ipa_main.c" where it's used. TIMER_FREQUENCY is used only
by that function, so move that definition as well.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Not all of the bits of the LOCAL_PKT_PROC_CNTXT register are valid.
Until IPA v4.5, there are 17 valid bits (though the bottom three
must be zero). Starting with IPA v4.5, 18 bits are valid.
Introduce proc_cntxt_base_addr_encoded() to encode the base address
for use in the register using only the valid bits.
Shorten the name of the register (omit "_BASE") to avoid the need to
wrap the line in the one place it's used.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Define the ENDP_INIT_NAT register for setting up the NAT
configuration for an endpoint. We aren't using NAT at this
time, so explicitly set the type to BYPASS for all endpoints.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add IPA version definitions for all IPA v3.x and v4.x. Fix the GSI
version associated with IPA version 4.1.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Modify conditional tests throughout the IPA code so they do not
assume that IPA v3.5.1 is the oldest version supported. Also remove
assumptions that IPA v4.5 is the newest version of IPA supported.
Augment versions in comments with "+", to be clearer that the
comment applies to a version and subsequent versions. (E.g.,
"present for IPA v4.2+" instead of just "present for v4.2".)
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
After commit 098a697b49 ("tcp_metrics: Use a single hash table
for all network namespaces."), tcpm_hash_bucket is local to
net/ipv4/tcp_metrics.c
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In commit 73f156a6e8 ("inetpeer: get rid of ip_id_count")
I used a very small hash table that could be abused
by patient attackers to reveal sensitive information.
Switch to a dynamic sizing, depending on RAM size.
Typical big hosts will now use 128x more storage (2 MB)
to get a similar increase in security and reduction
of hash collisions.
As a bonus, use of alloc_large_system_hash() spreads
allocated memory among all NUMA nodes.
Fixes: 73f156a6e8 ("inetpeer: get rid of ip_id_count")
Reported-by: Amit Klein <aksecurity@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cited commit added a new attribute before the existing group reference
count attribute, thereby changing its value and breaking existing
applications on new kernels.
Before:
# psample -l
libpsample ERROR psample_group_foreach: failed to recv message: Operation not supported
After:
# psample -l
Group Num Refcount Group Seq
1 1 0
Fix by restoring the value of the old attribute and remove the
misleading comments from the enumerator to avoid future bugs.
Cc: stable@vger.kernel.org
Fixes: d8bed686ab ("net: psample: Add tunnel support")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reported-by: Adiel Bidani <adielb@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel says:
====================
mlxsw: Add support for resilient nexthop groups
This patchset adds support for resilient nexthop groups in mlxsw. As far
as the hardware is concerned, resilient groups are the same as regular
groups. The differences lie in how mlxsw manages the individual
adjacency entries (nexthop buckets) that make up the group.
The first difference is that unlike regular groups the driver needs to
periodically update the kernel about activity of nexthop buckets so that
the kernel will not treat the buckets as idle, given traffic is
offloaded from the CPU to the ASIC. This is similar to what mlxsw is
already doing with respect to neighbour entries. The update interval is
set to 1 second to allow for short idle timers.
The second difference is that nexthop buckets that correspond to an
unresolved neighbour must be programmed to the device, as the size of
the group must remain fixed. This is achieved by programming such
entries with trap action, in order to trigger neighbour resolution by
the kernel.
The third difference is atomic replacement of individual nexthop
buckets. While the driver periodically updates the kernel about activity
of nexthop buckets, it is possible for a bucket to become active just
before the kernel decides to replace it with a different nexthop. To
avoid such situations and connections being reset, the driver instructs
the device to only replace an adjacency entry if it is inactive.
Failures are propagated back to the nexthop code.
Patchset overview:
Patches #1-#7 gradually add support for resilient nexthop groups
Patch #8 finally enables such groups to be programmed to the device
Patches #9-#10 add mlxsw-specific selftests
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Test that unsupported resilient nexthop group configurations are
rejected and that offload / trap indication is correctly set on nexthop
buckets in a resilient group.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The number of nexthop buckets in a resilient nexthop group never
changes, so when the gateway address of a nexthop cannot be resolved,
the nexthop buckets are programmed to trap packets to the CPU in order
to trigger resolution. For example:
# ip nexthop add id 1 via 198.51.100.1 dev swp3
# ip nexthop add id 10 group 1 type resilient buckets 32
# ip nexthop bucket get id 10 index 0
id 10 index 0 idle_time 1.44 nhid 1 trap
Where 198.51.100.1 is a made-up IP.
Test that in this case packets are indeed trapped to the CPU via the
unresolved neigh trap.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that mlxsw supports resilient nexthop groups, allow them to be
programmed after validating that their configuration conforms to the
device's limitations (e.g., number of buckets is within predefined
range).
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The kernel periodically checks the idle time of nexthop buckets to
determine if they are idle and can be re-populated with a new nexthop.
When the resilient nexthop group is offloaded to hardware, the kernel
will not see activity on nexthop buckets unless it is reported from
hardware.
Therefore, periodically (every 1 second) query the hardware for activity
of adjacency entries used as part of a resilient nexthop group and
report it to the nexthop code.
The activity is only queried if resilient nexthop groups are in use. The
delayed work is canceled otherwise.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The RATRAD register is used to dump and optionally clear activity bits
of router adjacency table entries. Will be used by the next patch to
query and clear the activity of nexthop buckets in a resilient nexthop
group.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
So far, mlxsw only updated hardware flags ('offload' / 'trap') on
nexthop objects. For resilient nexthop groups, these flags need to be
updated on individual nexthop buckets as well.
Update these flags whenever updating the flags of the encapsulating
nexthop object and whenever a nexthop bucket is replaced.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace a single nexthop bucket upon receiving a
'NEXTHOP_EVENT_BUCKET_REPLACE' notification.
When the 'force' parameter is not set, instruct the device to only
overwrite an adjacency entry if its activity is cleared, so as not to
break existing flows using the adjacency entry. The device does not
provide feedback if the replacement was successful in this case, so the
contents of the adjacency entry after the replacement are compared with
the replacement request.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Have the caller pass a pointer to the payload of the RATR register to
the function updating a single nexthop / adjacency entry.
In a subsequent patch, this will allow the caller to make sure
replacement was successful by querying the state of the adjacency entry
after replacement and comparing with the initial request.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
