Commit Graph

47 Commits

Author SHA1 Message Date
Sage Weil
efa4c1206e ceph: do not carry i_lock for readdir from dcache
We were taking dcache_lock inside of i_lock, which introduces a dependency
not found elsewhere in the kernel, complicationg the vfs locking
scalability work.  Since we don't actually need it here anyway, remove
it.

We only need i_lock to test for the I_COMPLETE flag, so be careful to do
so without dcache_lock held.

Signed-off-by: Sage Weil <sage@newdream.net>
2010-10-20 15:38:27 -07:00
Yehuda Sadeh
3d14c5d2b6 ceph: factor out libceph from Ceph file system
This factors out protocol and low-level storage parts of ceph into a
separate libceph module living in net/ceph and include/linux/ceph.  This
is mostly a matter of moving files around.  However, a few key pieces
of the interface change as well:

 - ceph_client becomes ceph_fs_client and ceph_client, where the latter
   captures the mon and osd clients, and the fs_client gets the mds client
   and file system specific pieces.
 - Mount option parsing and debugfs setup is correspondingly broken into
   two pieces.
 - The mon client gets a generic handler callback for otherwise unknown
   messages (mds map, in this case).
 - The basic supported/required feature bits can be expanded (and are by
   ceph_fs_client).

No functional change, aside from some subtle error handling cases that got
cleaned up in the refactoring process.

Signed-off-by: Sage Weil <sage@newdream.net>
2010-10-20 15:37:28 -07:00
Sage Weil
e835124c2b ceph: only send one flushsnap per cap_snap per mds session
Sending multiple flushsnap messages is problematic because we ignore
the response if the tid doesn't match, and the server may only respond to
each one once.  It's also a waste.

So, skip cap_snaps that are already on the flushing list, unless the caller
tells us to resend (because we are reconnecting).

Signed-off-by: Sage Weil <sage@newdream.net>
2010-09-17 08:03:08 -07:00
Sage Weil
ae00d4f37f ceph: fix cap_snap and realm split
The cap_snap creation/queueing relies on both the current i_head_snapc
_and_ the i_snap_realm pointers being correct, so that the new cap_snap
can properly reference the old context and the new i_head_snapc can be
updated to reference the new snaprealm's context.  To fix this, we:

 - move inodes completely to the new (split) realm so that i_snap_realm
   is correct, and
 - generate the new snapc's _before_ queueing the cap_snaps in
   ceph_update_snap_trace().

Signed-off-by: Sage Weil <sage@newdream.net>
2010-09-16 16:26:51 -07:00
Sage Weil
7d8cb26d7d ceph: maintain i_head_snapc when any caps are dirty, not just for data
We used to use i_head_snapc to keep track of which snapc the current epoch
of dirty data was dirtied under.  It is used by queue_cap_snap to set up
the cap_snap.  However, since we queue cap snaps for any dirty caps, not
just for dirty file data, we need to keep a valid i_head_snapc anytime
we have dirty|flushing caps.  This fixes a NULL pointer deref in
queue_cap_snap when writing back dirty caps without data (e.g.,
snaptest-authwb.sh).

Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-24 16:24:18 -07:00
Sage Weil
4a625be472 ceph: include dirty xattrs state in snapped caps
When we snapshot dirty metadata that needs to be written back to the MDS,
include dirty xattr metadata.  Make the capsnap reference the encoded
xattr blob so that it will be written back in the FLUSHSNAP op.

Also fix the capsnap creation guard to include dirty auth or file bits,
not just tests specific to dirty file data or file writes in progress
(this fixes auth metadata writeback).

Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-22 15:16:46 -07:00
Sage Weil
52dfb8ac0e ceph: constify dentry_operations
This makes checkpatch happy.

Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-03 10:25:30 -07:00
Greg Farnum
40819f6fb2 ceph: add flock/fcntl lock support
Implement flock inode operation to support advisory file locking.  All
lock/unlock operations are synchronous with the MDS.  Lock state is
sent when reconnecting to a recovering MDS to restore the shared lock
state.

Signed-off-by: Greg Farnum <gregf@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-02 16:10:53 -07:00
Greg Farnum
c6f3fdc592 ceph: add CEPH_FEATURE_FLOCK to the supported feature bits
This informs the server that we will accept v2 client_caps format and v2
client_reconnect format messages.

Signed-off-by: Greg Farnum <gregf@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-02 15:48:51 -07:00
Sage Weil
a8b763a9b3 ceph: use %pU to print uuid (fsid)
Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-01 20:11:42 -07:00
Sage Weil
6a2593823a ceph: specify supported features in super.h
Specify the supported/required feature bits in super.h client code instead
of using the definitions from the shared kernel/userspace headers (which
will go away shortly).

Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-01 20:11:41 -07:00
Greg Farnum
2bc50259fa ceph: add ceph_get_cap_for_mds function.
Signed-off-by: Greg Farnum <gregf@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-01 20:11:41 -07:00
Yehuda Sadeh
37151668ba ceph: do caps accounting per mds_client
Caps related accounting is now being done per mds client instead
of just being global. This prepares ground work for a later revision
of the caps preallocated reservation list.

Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-01 20:11:40 -07:00
Linus Torvalds
b612a05537 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  ceph: clean up on forwarded aborted mds request
  ceph: fix leak of osd authorizer
  ceph: close out mds, osd connections before stopping auth
  ceph: make lease code DN specific
  fs/ceph: Use ERR_CAST
  ceph: renew auth tickets before they expire
  ceph: do not resend mon requests on auth ticket renewal
  ceph: removed duplicated #includes
  ceph: avoid possible null dereference
  ceph: make mds requests killable, not interruptible
  sched: add wait_for_completion_killable_timeout
2010-05-30 08:56:39 -07:00
Andrea Gelmini
984c76908e ceph: removed duplicated #includes
fs/ceph/auth.c: linux/slab.h is included more than once.
fs/ceph/super.h: linux/slab.h is included more than once.

Acked-by: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-29 09:12:37 -07:00
Christoph Hellwig
7ea8085910 drop unused dentry argument to ->fsync
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-05-27 22:05:02 -04:00
Sage Weil
23804d91f1 ceph: specify max_bytes on readdir replies
Specify max bytes in request to bound size of reply.  Add associated
mount option with default value of 512 KB.

Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-17 15:25:41 -07:00
Sage Weil
6e19a16ef2 ceph: clean up mount options, ->show_options()
Ensure all options are included in /proc/mounts.  Some cleanup.

Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-17 15:25:29 -07:00
Cheng Renquan
640ef79d27 ceph: use ceph_sb_to_client instead of ceph_client
ceph_sb_to_client and ceph_client are really identical, we need to dump
one; while function ceph_client is confusing with "struct ceph_client",
ceph_sb_to_client's definition is more clear; so we'd better switch all
call to ceph_sb_to_client.

  -static inline struct ceph_client *ceph_client(struct super_block *sb)
  -{
  -	return sb->s_fs_info;
  -}

Signed-off-by: Cheng Renquan <crquan@gmail.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-17 15:25:17 -07:00
Sage Weil
81a6cf2d30 ceph: invalidate affected dentry leases on aborted requests
If we abort a request, we return to caller, but the request may still
complete.  And if we hold the dir FILE_EXCL bit, we may not release a
lease when sending a request.  A simple un-tar, control-c, un-tar again
will reproduce the bug (manifested as a 'Cannot open: File exists').

Ensure we invalidate affected dentry leases (as well dir I_COMPLETE) so
we don't have valid (but incorrect) leases.  Do the same, consistently, at
other sites where I_COMPLETE is similarly cleared.

Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-17 10:25:45 -07:00
Sage Weil
d45d0d970f ceph: add missing #includes
Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-03 10:49:24 -07:00
Linus Torvalds
96e35b40c0 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  ceph: use separate class for ceph sockets' sk_lock
  ceph: reserve one more caps space when doing readdir
  ceph: queue_cap_snap should always queue dirty context
  ceph: fix dentry reference leak in dcache readdir
  ceph: decode v5 of osdmap (pool names) [protocol change]
  ceph: fix ack counter reset on connection reset
  ceph: fix leaked inode ref due to snap metadata writeback race
  ceph: fix snap context reference leaks
  ceph: allow writeback of snapped pages older than 'oldest' snapc
  ceph: fix dentry rehashing on virtual .snap dir
2010-04-14 18:45:31 -07:00
Sage Weil
fc837c8f04 ceph: queue_cap_snap should always queue dirty context
This simplifies the calling convention, and fixes a bug where we queue a
capsnap with a context other than i_head_snapc (the one that matches the
dirty pages).  The result was a BUG at fs/ceph/caps.c:2178 on writeback
completion when a capsnap matching the writeback snapc could not be found.

Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-13 12:28:31 -07:00
Tejun Heo
5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Stephen Rothwell
f1a3d57213 ceph: update for write_inode API change
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Sage Weil <sage@newdream.net>
2010-03-05 14:49:41 -08:00
Yehuda Sadeh
422d2cb8f9 ceph: reset osd after relevant messages timed out
This simplifies the process of timing out messages. We
keep lru of current messages that are in flight. If a
timeout has passed, we reset the osd connection, so that
messages will be retransmitted.  This is a failsafe in case
we hit some sort of problem sending out message to the OSD.
Normally, we'll get notification via an updated osdmap if
there are problems.

If a request is older than the keepalive timeout, send a
keepalive to ensure we detect any breaks in the TCP connection.

Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
2010-03-04 11:26:35 -08:00
Sage Weil
e9964c1023 ceph: fix flush_dirty_caps race with caps migration
The flush_dirty_caps() used to loop over the first entry of the cap_dirty
dirty list on the assumption that after calling ceph_check_caps() it would
be removed from the list.  This isn't true for caps that are being
migrated between MDSs, where we've received the EXPORT but not the IMPORT.

Instead, do a safe list iteration, and pin the next inode on the list via
the CEPH_I_NOFLUSH flag.

Signed-off-by: Sage Weil <sage@newdream.net>
2010-03-01 15:28:02 -08:00
Sage Weil
2600d2dd50 ceph: drop messages on unregistered mds sessions; cleanup
Verify the mds session is currently registered before handling
incoming messages.  Clean up message handlers to pull mds out
of session->s_mds instead of less trustworthy src field.

Clean up con_{get,put} debug output.

Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-23 14:26:35 -08:00
Sage Weil
7c1332b8cb ceph: fix iterate_caps removal race
We need to be able to iterate over all caps on a session with a
possibly slow callback on each cap.  To allow this, we used to
prevent cap reordering while we were iterating.  However, we were
not safe from races with removal: removing the 'next' cap would
make the next pointer from list_for_each_entry_safe be invalid,
and cause a lock up or similar badness.

Instead, we keep an iterator pointer in the session pointing to
the current cap.  As before, we avoid reordering.  For removal,
if the cap isn't the current cap we are iterating over, we are
fine.  If it is, we clear cap->ci (to mark the cap as pending
removal) but leave it in the session list.  In iterate_caps, we
can safely finish removal and get the next cap pointer.

While we're at it, clean up put_cap to not take a cap reservation
context, as it was never used.

Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-17 10:02:47 -08:00
Sage Weil
85ccce43a3 ceph: clean up readdir caps reservation
Use a global counter for the minimum number of allocated caps instead of
hard coding a check against readdir_max.  This takes into account multiple
client instances, and avoids examining the superblock mount options when a
cap is dropped.

Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-17 10:02:43 -08:00
Sage Weil
a105f00cf1 ceph: use rbtree for snap_realms
Switch from radix tree to rbtree for snap realms.  This is much more
appropriate given that realm keys are few and far between.

Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-16 22:01:09 -08:00
Sage Weil
3c6f6b79a6 ceph: cleanup async writeback, truncation, invalidate helpers
Grab inode ref in helper.  Make work functions static, with consistent
naming.

Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-11 11:48:54 -08:00
Yehuda Sadeh
f5a2041bd9 ceph: put unused osd connections on lru
Instead of removing osd connection immediately when the
requests list is empty, put the osd connection on an lru.
Only if that osd has not been used for more than a specified
time, will it be removed.

Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-11 11:48:48 -08:00
Sage Weil
9bd2e6f8ba ceph: allow renewal of auth credentials
Add infrastructure to allow the mon_client to periodically renew its auth
credentials.  Also add a messenger callback that will force such a renewal
if a peer rejects our authenticator.

Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-10 15:04:47 -08:00
Yehuda Sadeh
2baba25019 ceph: writeback congestion control
Set bdi congestion bit when amount of write data in flight exceeds adjustable
threshold.

Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-21 16:39:56 -08:00
Sage Weil
06edf046dd ceph: include link to bdi in debugfs
Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-21 16:39:54 -08:00
Sage Weil
0743304d87 ceph: fix debugfs entry, simplify fsid checks
We may first learn our fsid from any of the mon, osd, or mds maps
(whichever the monitor sends first).  Consolidate checks in a single
helper.  Initialize the client debugfs entry then, since we need the
fsid (and global_id) for the directory name.

Also remove dead mount code.

Signed-off-by: Sage Weil <sage@newdream.net>
2009-11-20 14:24:27 -08:00
Sage Weil
4e7a5dcd1b ceph: negotiate authentication protocol; implement AUTH_NONE protocol
When we open a monitor session, we send an initial AUTH message listing
the auth protocols we support, our entity name, and (possibly) a previously
assigned global_id.  The monitor chooses a protocol and responds with an
initial message.

Initially implement AUTH_NONE, a dummy protocol that provides no security,
but works within the new framework.  It generates 'authorizers' that are
used when connecting to (mds, osd) services that simply state our entity
name and global_id.

This is a wire protocol change.

Signed-off-by: Sage Weil <sage@newdream.net>
2009-11-18 16:19:57 -08:00
Sage Weil
039934b895 ceph: build cleanly without CONFIG_DEBUG_FS
Signed-off-by: Sage Weil <sage@newdream.net>
2009-11-12 15:56:51 -08:00
Sage Weil
cdac830313 ceph: remove recon_gen logic
We don't get an explicit affirmative confirmation that our caps reconnect,
nor do we necessarily want to pay that cost.  So, take all this code out
for now.

Signed-off-by: Sage Weil <sage@newdream.net>
2009-11-10 16:03:53 -08:00
Sage Weil
685f9a5d14 ceph: do not confuse stale and dead (unreconnected) caps
We were using the cap_gen to track both stale caps (caps that timed out
due to temporarily losing touch with the mds) and dead caps that did not
reconnect after an MDS failure.  Introduce a recon_gen counter to track
reconnections to restarted MDSs and kill dead caps based on that instead.

Rename gen to cap_gen while we're at it to make it more clear which is
which.

Signed-off-by: Sage Weil <sage@newdream.net>
2009-11-09 12:06:07 -08:00
Noah Watkins
fbbccec9c6 ceph: replace list_entry with container_of
Usage of non-list.h list_entry function for container_of
functionality replaced with direct use of container_of.

Signed-off-by: Noah Watkins <noah@noahdesu.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-28 17:44:22 -07:00
Sage Weil
6b8051855d ceph: allocate and parse mount args before client instance
This simplifies much of the error handling during mount.  It also means
that we have the mount args before client creation, and we can initialize
based on those options.

Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-27 11:57:03 -07:00
Sage Weil
ecb19c4649 ceph: remove small mon addr limit; use CEPH_MAX_MON where appropriate
Get rid of separate max mon limit; use the system limit instead.  This
allows mounts when there are lots of mon addrs provided by mount.ceph (as
with a host with lots of A/AAAA records).

Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-22 10:53:17 -07:00
Sage Weil
8fa9765576 ceph: enable readahead
Initialized bdi->ra_pages to enable readahead.  Use 512KB default.

Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-16 14:44:43 -07:00
Sage Weil
afcdaea3f2 ceph: flush dirty caps via the cap_dirty list
Previously we were flushing dirty caps by passing an extra flag
when traversing the delayed caps list.  Besides being a bit ugly,
that can also miss caps that are dirty but didn't result in a
cap requeue: notably, mark_caps_dirty().

Separate the flushing into a separate helper, and traverse the
cap_dirty list.

This also brings i_dirty_item in line with i_dirty_caps: we are
on the list IFF caps != 0.  We carry an inode ref IFF
dirty_caps|flushing_caps != 0.

Lose the unused return value from __ceph_mark_caps_dirty().

Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-15 18:14:35 -07:00
Sage Weil
de57606c23 ceph: client types
We first define constants, types, and prototypes for the kernel client
proper.

A few subsystems are defined separately later: the MDS, OSD, and
monitor clients, and the messaging layer.

Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 11:31:07 -07:00