Dave reported a problem where we were panicing with generic/475 with
misc-5.7. This is because we were doing IO after we had stopped all of
the worker threads, because we do the log tree cleanup on roots at drop
time. Cleaning up the log tree will always need to do reads if we
happened to have evicted the blocks from memory.
Because of this simply add a helper to btrfs_cleanup_transaction() that
will go through and drop all of the log roots. This gets run before we
do the close_ctree() work, and thus we are allowed to do any reads that
we would need. I ran this through many iterations of generic/475 with
constrained memory and I did not see the issue.
general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6b6b: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI
CPU: 2 PID: 12359 Comm: umount Tainted: G W 5.6.0-rc7-btrfs-next-58 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
RIP: 0010:btrfs_queue_work+0x33/0x1c0 [btrfs]
RSP: 0018:ffff9cfb015937d8 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff8eb5e339ed80 RCX: 0000000000000000
RDX: 0000000000000001 RSI: ffff8eb5eb33b770 RDI: ffff8eb5e37a0460
RBP: ffff8eb5eb33b770 R08: 000000000000020c R09: ffffffff9fc09ac0
R10: 0000000000000007 R11: 0000000000000000 R12: 6b6b6b6b6b6b6b6b
R13: ffff9cfb00229040 R14: 0000000000000008 R15: ffff8eb5d3868000
FS: 00007f167ea022c0(0000) GS:ffff8eb5fae00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f167e5e0cb1 CR3: 0000000138c18004 CR4: 00000000003606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
btrfs_end_bio+0x81/0x130 [btrfs]
__split_and_process_bio+0xaf/0x4e0 [dm_mod]
? percpu_counter_add_batch+0xa3/0x120
dm_process_bio+0x98/0x290 [dm_mod]
? generic_make_request+0xfb/0x410
dm_make_request+0x4d/0x120 [dm_mod]
? generic_make_request+0xfb/0x410
generic_make_request+0x12a/0x410
? submit_bio+0x38/0x160
submit_bio+0x38/0x160
? percpu_counter_add_batch+0xa3/0x120
btrfs_map_bio+0x289/0x570 [btrfs]
? kmem_cache_alloc+0x24d/0x300
btree_submit_bio_hook+0x79/0xc0 [btrfs]
submit_one_bio+0x31/0x50 [btrfs]
read_extent_buffer_pages+0x2fe/0x450 [btrfs]
btree_read_extent_buffer_pages+0x7e/0x170 [btrfs]
walk_down_log_tree+0x343/0x690 [btrfs]
? walk_log_tree+0x3d/0x380 [btrfs]
walk_log_tree+0xf7/0x380 [btrfs]
? plist_requeue+0xf0/0xf0
? delete_node+0x4b/0x230
free_log_tree+0x4c/0x130 [btrfs]
? wait_log_commit+0x140/0x140 [btrfs]
btrfs_free_log+0x17/0x30 [btrfs]
btrfs_drop_and_free_fs_root+0xb0/0xd0 [btrfs]
btrfs_free_fs_roots+0x10c/0x190 [btrfs]
? do_raw_spin_unlock+0x49/0xc0
? _raw_spin_unlock+0x29/0x40
? release_extent_buffer+0x121/0x170 [btrfs]
close_ctree+0x289/0x2e6 [btrfs]
generic_shutdown_super+0x6c/0x110
kill_anon_super+0xe/0x30
btrfs_kill_super+0x12/0x20 [btrfs]
deactivate_locked_super+0x3a/0x70
Reported-by: David Sterba <dsterba@suse.com>
Fixes: 8c38938c7b ("btrfs: move the root freeing stuff into btrfs_put_root")
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When cleaning pinned extents right before deleting an unused block group,
we check if there's still a previous transaction running and if so we
increment its reference count before using it for cleaning pinned ranges
in its pinned extents iotree. However we ended up never decrementing the
reference count after using the transaction, resulting in a memory leak.
Fix it by decrementing the reference count.
Fixes: fe119a6eeb ("btrfs: switch to per-transaction pinned extents")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This patch corrects the SPDX License Identifier style in header file
related to Btrfs File System support. For C header files
Documentation/process/license-rules.rst mandates C-like comments
(opposed to C source files where C++ style should be used).
Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46.
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
I made a mistake with my previous fix, I assumed that we didn't need to
mess with the reloc roots once we were out of the part of relocation where
we are actually moving the extents.
The subtle thing that I missed is that btrfs_init_reloc_root() also
updates the last_trans for the reloc root when we do
btrfs_record_root_in_trans() for the corresponding fs_root. I've added a
comment to make sure future me doesn't make this mistake again.
This showed up as a WARN_ON() in btrfs_copy_root() because our
last_trans didn't == the current transid. This could happen if we
snapshotted a fs root with a reloc root after we set
rc->create_reloc_tree = 0, but before we actually merge the reloc root.
Worth mentioning that the regression produced the following warning
when running snapshot creation and balance in parallel:
BTRFS info (device sdc): relocating block group 30408704 flags metadata|dup
------------[ cut here ]------------
WARNING: CPU: 0 PID: 12823 at fs/btrfs/ctree.c:191 btrfs_copy_root+0x26f/0x430 [btrfs]
CPU: 0 PID: 12823 Comm: btrfs Tainted: G W 5.6.0-rc7-btrfs-next-58 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
RIP: 0010:btrfs_copy_root+0x26f/0x430 [btrfs]
RSP: 0018:ffffb96e044279b8 EFLAGS: 00010202
RAX: 0000000000000009 RBX: ffff9da70bf61000 RCX: ffffb96e04427a48
RDX: ffff9da733a770c8 RSI: ffff9da70bf61000 RDI: ffff9da694163818
RBP: ffff9da733a770c8 R08: fffffffffffffff8 R09: 0000000000000002
R10: ffffb96e044279a0 R11: 0000000000000000 R12: ffff9da694163818
R13: fffffffffffffff8 R14: ffff9da6d2512000 R15: ffff9da714cdac00
FS: 00007fdeacf328c0(0000) GS:ffff9da735e00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055a2a5b8a118 CR3: 00000001eed78002 CR4: 00000000003606f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
? create_reloc_root+0x49/0x2b0 [btrfs]
? kmem_cache_alloc_trace+0xe5/0x200
create_reloc_root+0x8b/0x2b0 [btrfs]
btrfs_reloc_post_snapshot+0x96/0x5b0 [btrfs]
create_pending_snapshot+0x610/0x1010 [btrfs]
create_pending_snapshots+0xa8/0xd0 [btrfs]
btrfs_commit_transaction+0x4c7/0xc50 [btrfs]
? btrfs_mksubvol+0x3cd/0x560 [btrfs]
btrfs_mksubvol+0x455/0x560 [btrfs]
__btrfs_ioctl_snap_create+0x15f/0x190 [btrfs]
btrfs_ioctl_snap_create_v2+0xa4/0xf0 [btrfs]
? mem_cgroup_commit_charge+0x6e/0x540
btrfs_ioctl+0x12d8/0x3760 [btrfs]
? do_raw_spin_unlock+0x49/0xc0
? _raw_spin_unlock+0x29/0x40
? __handle_mm_fault+0x11b3/0x14b0
? ksys_ioctl+0x92/0xb0
ksys_ioctl+0x92/0xb0
? trace_hardirqs_off_thunk+0x1a/0x1c
__x64_sys_ioctl+0x16/0x20
do_syscall_64+0x5c/0x280
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x7fdeabd3bdd7
Fixes: 2abc726ab4 ("btrfs: do not init a reloc root if we aren't relocating")
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The commit 9c1036fdb1 ("btrfs: Remove BTRFS_SUBVOL_CREATE_ASYNC
support") breaks strace build with the kernel headers from git:
btrfs.c: In function "btrfs_test_subvol_ioctls":
btrfs.c:531:23: error: "BTRFS_SUBVOL_CREATE_ASYNC" undeclared (first use
in this function)
vol_args_v2.flags = BTRFS_SUBVOL_CREATE_ASYNC;
Moreover, it is improper to break UAPI, strace uses the definitions to
decode ioctls that are considered part of public API.
Restore the macro definition and put it under "#ifndef __KERNEL__"
in order to prevent inadvertent in-kernel usage.
Fixes: 9c1036fdb1 ("btrfs: Remove BTRFS_SUBVOL_CREATE_ASYNC support")
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Eugene Syromiatnikov <esyr@redhat.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Whenever we add a ticket to a space_info object we increment the object's
reclaim_size counter witht the ticket's bytes, and we decrement it with
the corresponding amount only when we are able to grant the requested
space to the ticket. When we are not able to grant the space to a ticket,
or when the ticket is removed due to a signal (e.g. an application has
received sigterm from the terminal) we never decrement the counter with
the corresponding bytes from the ticket. This leak can result in the
space reclaim code to later do much more work than necessary. So fix it
by decrementing the counter when those two cases happen as well.
Fixes: db161806dc ("btrfs: account ticket size at add/delete time")
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is a revert of commit 0a8068a3dd ("btrfs: make ranged full
fsyncs more efficient"), with updated comment in btrfs_sync_file.
Commit 0a8068a3dd ("btrfs: make ranged full fsyncs more efficient")
made full fsyncs operate on the given range only as it assumed it was safe
when using the NO_HOLES feature, since the hole detection was simplified
some time ago and no longer was a source for races with ordered extent
completion of adjacent file ranges.
However it's still not safe to have a full fsync only operate on the given
range, because extent maps for new extents might not be present in memory
due to inode eviction or extent cloning. Consider the following example:
1) We are currently at transaction N;
2) We write to the file range [0, 1MiB);
3) Writeback finishes for the whole range and ordered extents complete,
while we are still at transaction N;
4) The inode is evicted;
5) We open the file for writing, causing the inode to be loaded to
memory again, which sets the 'full sync' bit on its flags. At this
point the inode's list of modified extent maps is empty (figuring
out which extents were created in the current transaction and were
not yet logged by an fsync is expensive, that's why we set the
'full sync' bit when loading an inode);
6) We write to the file range [512KiB, 768KiB);
7) We do a ranged fsync (such as msync()) for file range [512KiB, 768KiB).
This correctly flushes this range and logs its extent into the log
tree. When the writeback started an extent map for range [512KiB, 768KiB)
was added to the inode's list of modified extents, and when the fsync()
finishes logging it removes that extent map from the list of modified
extent maps. This fsync also clears the 'full sync' bit;
8) We do a regular fsync() (full ranged). This fsync() ends up doing
nothing because the inode's list of modified extents is empty and
no other changes happened since the previous ranged fsync(), so
it just returns success (0) and we end up never logging extents for
the file ranges [0, 512KiB) and [768KiB, 1MiB).
Another scenario where this can happen is if we replace steps 2 to 4 with
cloning from another file into our test file, as that sets the 'full sync'
bit in our inode's flags and does not populate its list of modified extent
maps.
This was causing test case generic/457 to fail sporadically when using the
NO_HOLES feature, as it exercised this later case where the inode has the
'full sync' bit set and has no extent maps in memory to represent the new
extents due to extent cloning.
Fix this by reverting commit 0a8068a3dd ("btrfs: make ranged full fsyncs
more efficient") since there is no easy way to work around it.
Fixes: 0a8068a3dd ("btrfs: make ranged full fsyncs more efficient")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When not using the NO_HOLES feature we were not marking the destination's
file range as written after cloning an inline extent into it. This can
lead to a data loss if the current destination file size is smaller than
the source file's size.
Example:
$ mkfs.btrfs -f -O ^no-holes /dev/sdc
$ mount /mnt/sdc /mnt
$ echo "hello world" > /mnt/foo
$ cp --reflink=always /mnt/foo /mnt/bar
$ rm -f /mnt/foo
$ umount /mnt
$ mount /mnt/sdc /mnt
$ cat /mnt/bar
$
$ stat -c %s /mnt/bar
0
# -> the file is empty, since we deleted foo, the data lost is forever
Fix that by calling btrfs_inode_set_file_extent_range() after cloning an
inline extent.
A test case for fstests will follow soon.
Link: https://lore.kernel.org/linux-btrfs/20200404193846.GA432065@latitude/
Reported-by: Johannes Hirte <johannes.hirte@datenkhaos.de>
Fixes: 9ddc959e80 ("btrfs: use the file extent tree infrastructure")
Tested-by: Johannes Hirte <johannes.hirte@datenkhaos.de>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Previously we would set the reloc root's last snapshot to transid - 1.
However there was a problem with doing this, and we changed it to
setting the last snapshot to the generation of the commit node of the fs
root.
This however broke should_ignore_root(). The assumption is that if we
are in a generation newer than when the reloc root was created, then we
would find the reloc root through normal backref lookups, and thus can
ignore any fs roots we find with an old enough reloc root.
Now that the last snapshot could be considerably further in the past
than before, we'd end up incorrectly ignoring an fs root. Thus we'd
find no nodes for the bytenr we were searching for, and we'd fail to
relocate anything. We'd loop through the relocate code again and see
that there were still used space in that block group, attempt to
relocate those bytenr's again, fail in the same way, and just loop like
this forever. This is tricky in that we have to not modify the fs root
at all during this time, so we need to have a block group that has data
in this fs root that is not shared by any other root, which is why this
has been difficult to reproduce.
Fixes: 054570a1dc ("Btrfs: fix relocation incorrectly dropping data references")
CC: stable@vger.kernel.org # 4.9+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Ordered ops are started twice in sync file, once outside of inode mutex
and once inside, taking the dio semaphore. There was one error path
missing the semaphore unlock.
Fixes: aab15e8ec2 ("Btrfs: fix rare chances for data loss when doing a fast fsync")
CC: stable@vger.kernel.org # 4.19+
Signed-off-by: Robbie Ko <robbieko@synology.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
[ add changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
snprintf() is a hard-to-use function, and it's especially difficult to
use it properly for concatenating substrings in a buffer with a limited
size. Since snprintf() returns the would-be-output size, not the actual
size, the subsequent use of snprintf() may point to the incorrect
position easily. Also, returning the value from snprintf() directly to
sysfs show function would pass a bogus value that is higher than the
actually truncated string.
That said, although the current code doesn't actually overflow the
buffer with PAGE_SIZE, it's a usage that shouldn't be done. Or it's
worse; this gives a wrong confidence as if it were doing safe
operations.
This patch replaces such snprintf() calls with a safer version,
scnprintf(). It returns the actual output size, hence it's more
intuitive and the code does what's expected.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Zygo reported a deadlock where a task was stuck in the inode logical
resolve code. The deadlock looks like this
Task 1
btrfs_ioctl_logical_to_ino
->iterate_inodes_from_logical
->iterate_extent_inodes
->path->search_commit_root isn't set, so a transaction is started
->resolve_indirect_ref for a root that's being deleted
->search for our key, attempt to lock a node, DEADLOCK
Task 2
btrfs_drop_snapshot
->walk down to a leaf, lock it, walk up, lock node
->end transaction
->start transaction
-> wait_cur_trans
Task 3
btrfs_commit_transaction
->wait_event(cur_trans->write_wait, num_writers == 1) DEADLOCK
We are holding a transaction open in btrfs_ioctl_logical_to_ino while we
try to resolve our references. btrfs_drop_snapshot() holds onto its
locks while it stops and starts transaction handles, because it assumes
nobody is going to touch the root now. Commit just does what commit
does, waiting for the writers to finish, blocking any new trans handles
from starting.
Fix this by making the backref code not try to resolve backrefs of roots
that are currently being deleted. This will keep us from walking into a
snapshot that's currently being deleted.
This problem was harder to hit before because we rarely broke out of the
snapshot delete halfway through, but with my delayed ref throttling code
it happened much more often. However we've always been able to do this,
so it's not a new problem.
Fixes: 8da6d5815c ("Btrfs: added btrfs_find_all_roots()")
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We always search the commit root of the extent tree for looking up back
references, however we track the reloc roots based on their current
bytenr.
This is wrong, if we commit the transaction between relocating tree
blocks we could end up in this code in build_backref_tree
if (key.objectid == key.offset) {
/*
* Only root blocks of reloc trees use backref
* pointing to itself.
*/
root = find_reloc_root(rc, cur->bytenr);
ASSERT(root);
cur->root = root;
break;
}
find_reloc_root() is looking based on the bytenr we had in the commit
root, but if we've COWed this reloc root we will not find that bytenr,
and we will trip over the ASSERT(root).
Fix this by using the commit_root->start bytenr for indexing the commit
root. Then we change the __update_reloc_root() caller to be used when
we switch the commit root for the reloc root during commit.
This fixes the panic I was seeing when we started throttling relocation
for delayed refs.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are two bugs here, but fixing them independently would just result
in pain if you happened to bisect between the two patches.
First is how we handle the -EAGAIN from relocate_tree_block(). We don't
set error, unless we happen to be the first node, which makes no sense,
I have no idea what the code was trying to accomplish here.
We in fact _do_ want err set here so that we know we need to restart in
relocate_block_group(). Also we need finish_pending_nodes() to not
actually call link_to_upper(), because we didn't actually relocate the
block.
And then if we do get -EAGAIN we do not want to set our backref cache
last_trans to the one before ours. This would force us to update our
backref cache if we didn't cross transaction ids, which would mean we'd
have some nodes updated to their new_bytenr, but still able to find
their old bytenr because we're searching the same commit root as the
last time we went through relocate_tree_blocks.
Fixing these two things keeps us from panicing when we start breaking
out of relocate_tree_blocks() either for delayed ref flushing or enospc.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since we're not only checking for metadata reservations but also if we
need to throttle our delayed ref generation, reorder
reserve_metadata_space() above the select_one_root() call in
relocate_tree_block().
The reason we want this is because select_reloc_root() will mess with
the backref cache, and if we're going to bail we want to be able to
cleanly remove this node from the backref cache and come back along to
regenerate it. Move it up so this is the first thing we do to make
restarting cleaner.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Here we are just searching down to the bytenr we're building the backref
tree for, and all of it's paths to the roots. These bytenrs are not
guaranteed to be anywhere near each other, so readahead just generates
extra latency.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Readahead will generate a lot of extra reads for adjacent nodes, but
when running delayed refs we have no idea if the next ref is going to be
adjacent or not, so this potentially just generates a lot of extra IO.
To make matters worse each ref is truly just looking for one item, it
doesn't generally search forward, so we simply don't need it here.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
With BTRFS_SUBVOL_CREATE_ASYNC support remove it's no longer required to
pass the async_transid parameter so remove it and any code using it.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_ioctl_snap_create_transid no longer takes a transid argument, so
remove it and rename the function to __btrfs_ioctl_snap_create to
reflect it's an internal, worker function.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This functionality was deprecated in kernel 5.4. Since no one has
complained of the impending removal it's time we did so.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add comment ]
Signed-off-by: David Sterba <dsterba@suse.com>
Now that we have proper root ref counting everywhere we can kill the
subvol_srcu.
* removal of fs_info::subvol_srcu reduces size of fs_info by 1176 bytes
* the refcount_t used for the references checks for accidental 0->1
in cases where the root lifetime would not be properly protected
* there's a leak detector for roots to catch unfreed roots at umount
time
* SRCU served us well over the years but is was not a proper
synchronization mechanism for some cases
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
The radix root is primarily protected by the fs_roots_radix_lock, so use
that to lookup and get a ref on all of our fs roots in
btrfs_cleanup_fs_roots. The tree reference is taken in the protected
section as before.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that all the users of roots take references for them we can drop the
extra root ref we've been taking. Before we had roots at 2 refs for the
life of the file system, one for the radix tree, and one simply for
existing. Now that we have proper ref accounting in all places that use
roots we can drop this extra ref simply for existing as we no longer
need it.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At the point we add a root to the dead roots list we have no open inodes
for that root, so we need to hold a ref on that root to keep it from
disappearing.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If we make sure all the inodes have refs on their root we don't have to
worry about the root disappearing while we have open inodes.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are a few different ways to free roots, either you allocated them
yourself and you just do
free_extent_buffer(root->node);
free_extent_buffer(root->commit_node);
btrfs_put_root(root);
Which is the pattern for log roots. Or for snapshots/subvolumes that
are being dropped you simply call btrfs_free_fs_root() which does all
the cleanup for you.
Unify this all into btrfs_put_root(), so that we don't free up things
associated with the root until the last reference is dropped. This
makes the root freeing code much more significant.
The only caveat is at close_ctree() time we have to free the extent
buffers for all of our main roots (extent_root, chunk_root, etc) because
we have to drop the btree_inode and we'll run into issues if we hold
onto those nodes until ->kill_sb() time. This will be addressed in the
future when we kill the btree_inode.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We are going to make root life be controlled soley by refcounting, and
inodes will be one of the things that hold a ref on the root. This
means we need to handle dropping the ino_cache_inode outside of the root
freeing logic, so move it into btrfs_drop_and_free_fs_root() so it is
cleaned up properly on unmount.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
I'm going to make the entire destruction of btrfs_root's controlled by
their refcount, so it will be helpful to notice if we're leaking their
eb's on umount.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This was pretty subtle, we default to reloc roots having 0 root refs, so
if we crash in the middle of the relocation they can just be deleted.
If we successfully complete the relocation operations we'll set our root
refs to 1 in prepare_to_merge() and then go on to merge_reloc_roots().
At prepare_to_merge() time if any of the reloc roots have a 0 reference
still, we will remove that reloc root from our reloc root rb tree, and
then clean it up later.
However this only happens if we successfully start a transaction. If
we've aborted previously we will skip this step completely, and only
have reloc roots with a reference count of 0, but were never properly
removed from the reloc control's rb tree.
This isn't a problem per-se, our references are held by the list the
reloc roots are on, and by the original root the reloc root belongs to.
If we end up in this situation all the reloc roots will be added to the
dirty_reloc_list, and then properly dropped at that point. The reloc
control will be free'd and the rb tree is no longer used.
There were two options when fixing this, one was to remove the BUG_ON(),
the other was to make prepare_to_merge() handle the case where we
couldn't start a trans handle.
IMO this is the cleaner solution. I started with handling the error in
prepare_to_merge(), but it turned out super ugly. And in the end this
BUG_ON() simply doesn't matter, the cleanup was happening properly, we
were just panicing because this BUG_ON() only matters in the success
case. So I've opted to just remove it and add a comment where it was.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We previously were relying on root->reloc_root to be cleaned up by the
drop snapshot, or the error handling. However if btrfs_drop_snapshot()
failed it wouldn't drop the ref for the root. Also we sort of depend on
the right thing to happen with moving reloc roots between lists and the
fs root they belong to, which makes it hard to figure out who owns the
reference.
Fix this by explicitly holding a reference on the reloc root for
roo->reloc_root. This means that we hold two references on reloc roots,
one for whichever reloc_roots list it's attached to, and the
root->reloc_root we're on.
This makes it easier to reason out who owns a reference on the root, and
when it needs to be dropped.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The DEAD_RELOC_TREE flag is in place in order to avoid a use after free
in init_reloc_root, tracking the presence of reloc_root. However adding
the explicit tree references in previous patches makes the use after
free impossible because at this point we no longer have a reloc_control
set on the fs_info and thus cannot enter the function.
So move this to be coupled with clearing the root->reloc_root so we're
consistent with all other operations of the reloc root.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
If we have an error while processing the reloc roots we could leak roots
that were added to rc->reloc_roots before we hit the error. We could
have also not removed the reloc tree mapping from our rb_tree, so clean
up any remaining nodes in the reloc root rb_tree.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ use rbtree_postorder_for_each_entry_safe ]
Signed-off-by: David Sterba <dsterba@suse.com>
We previously were checking if the root had a dead root before accessing
root->reloc_root in order to avoid a use-after-free type bug. However
this scenario happens after we've unset the reloc control, so we would
have been saved if we'd simply checked for fs_info->reloc_control. At
this point during relocation we no longer need to be creating new reloc
roots, so simply move this check above the reloc_root checks to avoid
any future races and confusion.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If we do merge_reloc_roots() we could insert a few roots onto the dirty
subvol roots list, where we hold a ref on them. If we fail to start the
transaction we need to run clean_dirty_subvols() in order to cleanup the
refs.
CC: stable@vger.kernel.org # 5.4+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If we fail to load an fs root, or fail to start a transaction we can
bail without unsetting the reloc control, which leads to problems later
when we free the reloc control but still have it attached to the file
system.
In the normal path we'll end up calling unset_reloc_control() twice, but
all it does is set fs_info->reloc_control = NULL, and we can only have
one balance at a time so it's not racey.
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If we have an error while building the backref tree in relocation we'll
process all the pending edges and then free the node. However if we
integrated some edges into the cache we'll lose our link to those edges
by simply freeing this node, which means we'll leak memory and
references to any roots that we've found.
Instead we need to use remove_backref_node(), which walks through all of
the edges that are still linked to this node and free's them up and
drops any root references we may be holding.
CC: stable@vger.kernel.org # 4.9+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In relocation, we need to locate all parent tree leaves referring to one
data extent, thus we have a complex mechanism to iterate throught extent
tree and subvolume trees to locate the related leaves.
However this is already done in backref.c, we have
btrfs_find_all_leafs(), which can return a ulist containing all leaves
referring to that data extent.
Use btrfs_find_all_leafs() to replace find_data_references().
There is a special handling for v1 space cache data extents, where we
need to delete the v1 space cache data extents, to avoid those data
extents to hang the data relocation.
In this patch, the special handling is done by re-iterating the root
tree leaf. Although it's a little less efficient than the old handling,
considering we can reuse a lot of code, it should be acceptable.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
While debugging I noticed I wasn't getting ref verify errors before
everything blew up. Turns out it's because we don't warn when we try to
add a normal ref via btrfs_inc_ref() if the block entry exists but has 0
references. This is incorrect, we should never be doing anything other
than adding a new extent once a block entry drops to 0 references.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit 0c713cbab6 ("Btrfs: fix race between ranged fsync and writeback
of adjacent ranges") fixed a bug where we could end up with file extent
items in a log tree that represent file ranges that overlap due to a race
between the hole detection of a ranged full fsync and writeback for a
different file range.
The problem was solved by forcing any ranged full fsync to become a
non-ranged full fsync - setting the range start to 0 and the end offset to
LLONG_MAX. This was a simple solution because the code that detected and
marked holes was very complex, it used to be done at copy_items() and
implied several searches on the fs/subvolume tree. The drawback of that
solution was that we started to flush delalloc for the entire file and
wait for all the ordered extents to complete for ranged full fsyncs
(including ordered extents covering ranges completely outside the given
range). Fortunatelly ranged full fsyncs are not the most common case
(hopefully for most workloads).
However a later fix for detecting and marking holes was made by commit
0e56315ca1 ("Btrfs: fix missing hole after hole punching and fsync
when using NO_HOLES") and it simplified a lot the detection of holes,
and now copy_items() no longer does it and we do it in a much more simple
way at btrfs_log_holes().
This makes it now possible to simply make the code that detects holes to
operate only on the initial range and no longer need to operate on the
whole file, while also avoiding the need to flush delalloc for the entire
file and wait for ordered extents that cover ranges that don't overlap the
given range.
Another special care is that we must skip file extent items that fall
entirely outside the fsync range when copying inode items from the
fs/subvolume tree into the log tree - this is to avoid races with ordered
extent completion for extents falling outside the fsync range, which could
cause us to end up with file extent items in the log tree that have
overlapping ranges - for example if the fsync range is [1Mb, 2Mb], when
we copy inode items we could copy an extent item for the range [0, 512K],
then release the search path and before moving to the next leaf, an
ordered extent for a range of [256Kb, 512Kb] completes - this would
cause us to copy the new extent item for range [256Kb, 512Kb] into the
log tree after we have copied one for the range [0, 512Kb] - the extents
overlap, resulting in a corruption.
So this change just does these steps:
1) When the NO_HOLES feature is enabled it leaves the initial range
intact - no longer sets it to [0, LLONG_MAX] when the full sync bit
is set in the inode. If NO_HOLES is not enabled, always set the range
to a full, just like before this change, to avoid missing file extent
items representing holes after replaying the log (for both full and
fast fsyncs);
2) Make the hole detection code to operate only on the fsync range;
3) Make the code that copies items from the fs/subvolume tree to skip
copying file extent items that cover a range completely outside the
range of the fsync.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function btrfs_log_inode() is quite large and so is its loop which
iterates the inode items from the fs/subvolume tree and copies them into
a log tree. Because this is a large loop inside a very large function
and because an upcoming patch in this series needs to add some more logic
inside that loop, move the loop into a helper function to make it a bit
more manageable.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Getting the end offset for a file extent item requires a bit of code since
the extent can be either inline or regular/prealloc. There are some places
all over the code base that open code this logic and in another patch
later in this series it will be needed again. Therefore encapsulate this
logic in a helper function and use it.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When doing a fast fsync for a range that starts at an offset greater than
zero, we can end up with a log that when replayed causes the respective
inode miss a file extent item representing a hole if we are not using the
NO_HOLES feature. This is because for fast fsyncs we don't log any extents
that cover a range different from the one requested in the fsync.
Example scenario to trigger it:
$ mkfs.btrfs -O ^no-holes -f /dev/sdd
$ mount /dev/sdd /mnt
# Create a file with a single 256K and fsync it to clear to full sync
# bit in the inode - we want the msync below to trigger a fast fsync.
$ xfs_io -f -c "pwrite -S 0xab 0 256K" -c "fsync" /mnt/foo
# Force a transaction commit and wipe out the log tree.
$ sync
# Dirty 768K of data, increasing the file size to 1Mb, and flush only
# the range from 256K to 512K without updating the log tree
# (sync_file_range() does not trigger fsync, it only starts writeback
# and waits for it to finish).
$ xfs_io -c "pwrite -S 0xcd 256K 768K" /mnt/foo
$ xfs_io -c "sync_range -abw 256K 256K" /mnt/foo
# Now dirty the range from 768K to 1M again and sync that range.
$ xfs_io -c "mmap -w 768K 256K" \
-c "mwrite -S 0xef 768K 256K" \
-c "msync -s 768K 256K" \
-c "munmap" \
/mnt/foo
<power fail>
# Mount to replay the log.
$ mount /dev/sdd /mnt
$ umount /mnt
$ btrfs check /dev/sdd
Opening filesystem to check...
Checking filesystem on /dev/sdd
UUID: 482fb574-b288-478e-a190-a9c44a78fca6
[1/7] checking root items
[2/7] checking extents
[3/7] checking free space cache
[4/7] checking fs roots
root 5 inode 257 errors 100, file extent discount
Found file extent holes:
start: 262144, len: 524288
ERROR: errors found in fs roots
found 720896 bytes used, error(s) found
total csum bytes: 512
total tree bytes: 131072
total fs tree bytes: 32768
total extent tree bytes: 16384
btree space waste bytes: 123514
file data blocks allocated: 589824
referenced 589824
Fix this issue by setting the range to full (0 to LLONG_MAX) when the
NO_HOLES feature is not enabled. This results in extra work being done
but it gives the guarantee we don't end up with missing holes after
replaying the log.
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of iterating all pending tickets on the normal/priority list to
sum their total size the cost can be amortized across ticket addition/
removal. This turns O(n) + O(m) (where n is the size of the normal list
and m of the priority list) into O(1). This will mostly have effect in
workloads that experience heavy flushing.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently btrfs doesn't provide a migratepage callback for data pages.
It means that fallback_migrate_page() is used to migrate btrfs pages.
fallback_migrate_page() cannot move dirty pages, instead it tries to
flush them (in sync mode) or just fails (in async mode).
In the sync mode pages which are scheduled to be processed by
btrfs_writepage_fixup_worker() can't be effectively flushed by the
migration code, because there is no established way to wait for the
completion of the delayed work.
It all leads to page migration failures.
To fix it the patch implements a btrs-specific migratepage callback,
which is similar to iomap_migrate_page() used by some other fs, except
it does take care of the PagePrivate2 flag which is used for data
ordering purposes.
Reviewed-by: Chris Mason <clm@fb.com>
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It's no longer used following 30d40577e3 ("btrfs: reloc: Also queue
orphan reloc tree for cleanup to avoid BUG_ON()"), so just remove it.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently the non-prefixed version is a simple wrapper used to hide
the 4th argument of the prefixed version. This doesn't bring much value
in practice and only makes the code harder to follow by adding another
level of indirection. Rectify this by removing the __ prefix and
have only one public function to release bytes from a block reservation.
No semantic changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When relocating data block groups with tons of small extents, or large
metadata block groups, there can be over 200,000 extents.
We will iterate all extents of such block group in relocate_block_group(),
where iteration itself can be kinda time-consuming.
So when user want to cancel the balance, the extent iteration loop can
be another target.
This patch will add the cancelling check in the extent iteration loop of
relocate_block_group() to make balance cancelling faster.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When relocating a data extents with large large data extents, we spend
most of our time in relocate_file_extent_cluster() at stage "moving data
extents":
1) | btrfs_relocate_block_group [btrfs]() {
1) | relocate_file_extent_cluster [btrfs]() {
1) $ 6586769 us | }
1) + 18.260 us | relocate_file_extent_cluster [btrfs]();
1) + 15.770 us | relocate_file_extent_cluster [btrfs]();
1) $ 8916340 us | }
1) | btrfs_relocate_block_group [btrfs]() {
1) | relocate_file_extent_cluster [btrfs]() {
1) $ 11611586 us | }
1) + 16.930 us | relocate_file_extent_cluster [btrfs]();
1) + 15.870 us | relocate_file_extent_cluster [btrfs]();
1) $ 14986130 us | }
To make data relocation cancelling quicker, add extra balance cancelling
check after each page read in relocate_file_extent_cluster().
Cleanup and error handling uses the same mechanism as if the whole
process finished
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Introduce a new error injection point, should_cancel_balance().
It's just a wrapper of atomic_read(&fs_info->balance_cancel_req), but
allows us to override the return value.
Currently there are only one locations using this function:
- btrfs_balance()
It checks cancel before each block group.
There are other locations checking fs_info->balance_cancel_req, but they
are not used as an indicator to exit, so there is no need to use the
wrapper.
But there will be more locations coming, and some locations can cause
kernel panic if not handled properly. So introduce this error injection
to provide better test interface.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
