Commit Graph

42 Commits

Author SHA1 Message Date
Philipp Zabel
59abba48c4 drm/simple_kms_helper: add drmm_simple_encoder_alloc()
Add an alternative to drm_simple_encoder_init() that allocates and
initializes a simple encoder and registers drm_encoder_cleanup() with
drmm_add_action_or_reset().

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2021-01-04 12:59:33 +01:00
Maxime Ripard
d74252bb8f
drm: Use the state pointer directly in atomic_check
Now that atomic_check takes the global atomic state as a parameter, we
don't need to go through the pointer in the CRTC state.

This was done using the following coccinelle script:

@ crtc_atomic_func @
identifier helpers;
identifier func;
@@

static struct drm_crtc_helper_funcs helpers = {
	...,
	.atomic_check = func,
	...,
};

@@
identifier crtc_atomic_func.func;
identifier crtc, state;
@@

  func(struct drm_crtc *crtc, struct drm_atomic_state *state) {
  ...
- struct drm_crtc_state *crtc_state = drm_atomic_get_new_crtc_state(state, crtc);
  ... when != crtc_state
- crtc_state->state
+ state
  ...
 }

@@
struct drm_crtc_state *crtc_state;
identifier crtc_atomic_func.func;
identifier crtc, state;
@@

  func(struct drm_crtc *crtc, struct drm_atomic_state *state) {
  ...
- crtc_state->state
+ state
  ...
 }

Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201102133834.1176740-3-maxime@cerno.tech
2020-11-03 12:20:09 +01:00
Maxime Ripard
29b77ad7b9
drm/atomic: Pass the full state to CRTC atomic_check
The current atomic helpers have either their object state being passed as
an argument or the full atomic state.

The former is the pattern that was done at first, before switching to the
latter for new hooks or when it was needed.

Let's start convert all the remaining helpers to provide a consistent
interface, starting with the CRTC's atomic_check.

The conversion was done using the coccinelle script below,
built tested on all the drivers and actually tested on vc4.

virtual report

@@
struct drm_crtc_helper_funcs *FUNCS;
struct drm_crtc *crtc;
struct drm_crtc_state *crtc_state;
identifier dev, state;
identifier ret, f;
@@

 f(struct drm_device *dev, struct drm_atomic_state *state)
 {
	<...
-	ret = FUNCS->atomic_check(crtc, crtc_state);
+	ret = FUNCS->atomic_check(crtc, state);
	...>
 }

@@
identifier crtc, new_state;
@@

 struct drm_crtc_helper_funcs {
 	...
-	int (*atomic_check)(struct drm_crtc *crtc, struct drm_crtc_state *new_state);
+	int (*atomic_check)(struct drm_crtc *crtc, struct drm_atomic_state *state);
 	...
}

@ crtc_atomic_func @
identifier helpers;
identifier func;
@@

static struct drm_crtc_helper_funcs helpers = {
	...,
	.atomic_check = func,
	...,
};

@ ignores_new_state @
identifier crtc_atomic_func.func;
identifier crtc, new_state;
@@

 int func(struct drm_crtc *crtc,
		struct drm_crtc_state *new_state)
 {
	... when != new_state
 }

@ adds_new_state depends on crtc_atomic_func && !ignores_new_state @
identifier crtc_atomic_func.func;
identifier crtc, new_state;
@@

 int func(struct drm_crtc *crtc, struct drm_crtc_state *new_state)
 {
+	struct drm_crtc_state *new_state = drm_atomic_get_new_crtc_state(state, crtc);
 	...
 }

@ depends on crtc_atomic_func @
identifier crtc_atomic_func.func;
expression E;
type T;
@@

 int func(...)
 {
	...
-	T state = E;
+	T crtc_state = E;
 	<+...
-	state
+	crtc_state
 	...+>
 }

@ depends on crtc_atomic_func @
identifier crtc_atomic_func.func;
type T;
@@

 int func(...)
 {
 	...
-	T state;
+	T crtc_state;
 	<+...
-	state
+	crtc_state
 	...+>
 }

@ depends on crtc_atomic_func @
identifier crtc_atomic_func.func;
identifier new_state;
identifier crtc;
@@

 int func(struct drm_crtc *crtc,
-	       struct drm_crtc_state *new_state
+	       struct drm_atomic_state *state
	       )
 { ... }

@@
identifier new_state;
identifier crtc;
@@

 int vmw_du_crtc_atomic_check(struct drm_crtc *crtc,
-                             struct drm_crtc_state *new_state
+                             struct drm_atomic_state *state
               )
 {
+       struct drm_crtc_state *new_state = drm_atomic_get_new_crtc_state(state, crtc);
	...
 }

@@
identifier new_state;
identifier crtc;
@@

 int vmw_du_crtc_atomic_check(struct drm_crtc *crtc,
-                             struct drm_crtc_state *new_state
+                             struct drm_atomic_state *state
               );

@ include depends on adds_new_state @
@@

 #include <drm/drm_atomic.h>

@ no_include depends on !include && adds_new_state @
@@

+ #include <drm/drm_atomic.h>
  #include <drm/...>

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20201028123222.1732139-1-maxime@cerno.tech
2020-11-02 12:34:49 +01:00
Maxime Ripard
351f950db4
drm/atomic: Pass the full state to CRTC atomic enable/disable
If the CRTC driver ever needs to access the full DRM state, it can't do so
at atomic_enable / atomic_disable time since drm_atomic_helper_swap_state
will have cleared the pointer from the struct drm_crtc_state to the struct
drm_atomic_state before calling those hooks.

In order to allow that, let's pass the full DRM state to atomic_enable and
atomic_disable. The conversion was done using the coccinelle script below,
built tested on all the drivers and actually tested on vc4.

virtual report

@@
struct drm_crtc_helper_funcs *FUNCS;
identifier dev, state;
identifier crtc, crtc_state;
@@

 disable_outputs(struct drm_device *dev, struct drm_atomic_state *state)
 {
 	<...
-	FUNCS->atomic_disable(crtc, crtc_state);
+	FUNCS->atomic_disable(crtc, state);
 	...>
 }

@@
struct drm_crtc_helper_funcs *FUNCS;
identifier dev, state;
identifier crtc, crtc_state;
@@

 drm_atomic_helper_commit_modeset_enables(struct drm_device *dev, struct drm_atomic_state *state)
 {
 	<...
-	FUNCS->atomic_enable(crtc, crtc_state);
+	FUNCS->atomic_enable(crtc, state);
 	...>
 }

@@
identifier crtc, old_state;
@@

 struct drm_crtc_helper_funcs {
	...
-	void (*atomic_enable)(struct drm_crtc *crtc, struct drm_crtc_state *old_state);
+	void (*atomic_enable)(struct drm_crtc *crtc, struct drm_atomic_state *state);
	...
-	void (*atomic_disable)(struct drm_crtc *crtc, struct drm_crtc_state *old_state);
+	void (*atomic_disable)(struct drm_crtc *crtc, struct drm_atomic_state *state);
	...
}

@ crtc_atomic_func @
identifier helpers;
identifier func;
@@

(
static struct drm_crtc_helper_funcs helpers = {
	...,
	.atomic_enable = func,
	...,
};
|
static struct drm_crtc_helper_funcs helpers = {
	...,
	.atomic_disable = func,
	...,
};
)

@ ignores_old_state @
identifier crtc_atomic_func.func;
identifier crtc, old_state;
@@

void func(struct drm_crtc *crtc,
		struct drm_crtc_state *old_state)
{
	... when != old_state
}

@ adds_old_state depends on crtc_atomic_func && !ignores_old_state @
identifier crtc_atomic_func.func;
identifier crtc, old_state;
@@

void func(struct drm_crtc *crtc, struct drm_crtc_state *old_state)
{
+	struct drm_crtc_state *old_state = drm_atomic_get_old_crtc_state(state, crtc);
	...
}

@ depends on crtc_atomic_func @
identifier crtc_atomic_func.func;
expression E;
type T;
@@

void func(...)
{
	...
-	T state = E;
+	T crtc_state = E;
	<+...
-	state
+	crtc_state
	...+>

}

@ depends on crtc_atomic_func @
identifier crtc_atomic_func.func;
type T;
@@

void func(...)
{
	...
-	T state;
+	T crtc_state;
	<+...
-	state
+	crtc_state
	...+>

}

@ depends on crtc_atomic_func @
identifier crtc_atomic_func.func;
identifier old_state;
identifier crtc;
@@

void func(struct drm_crtc *crtc,
-	       struct drm_crtc_state *old_state
+	       struct drm_atomic_state *state
	       )
		{ ... }

@ include depends on adds_old_state @
@@

 #include <drm/drm_atomic.h>

@ no_include depends on !include && adds_old_state @
@@

+ #include <drm/drm_atomic.h>
  #include <drm/...>

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/845aa10ef171fc0ea060495efef142a0c13f7870.1602161031.git-series.maxime@cerno.tech
2020-10-09 09:55:59 +02:00
Thomas Zimmermann
2cb5974dca drm/simple-kms: Fix documentation for drm_simple_encoder_init()
Brings the documentation of drm_simple_encoder_init() in sync with the
function's signature. Also add a paragraph clarifying the management of
the encoder's memory.

v2:
	* document memory management

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Fixes: 63170ac6f2 ("drm/simple-kms: Add drm_simple_encoder_{init,create}()")
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200304145312.26458-1-tzimmermann@suse.de
2020-03-06 09:24:29 +01:00
Thomas Zimmermann
63170ac6f2 drm/simple-kms: Add drm_simple_encoder_{init,create}()
This patch makes the internal encoder implementation of the simple
KMS helpers available to drivers.

These simple-encoder helpers initialize an encoder with an empty
implementation. This covers the requirements of most of the existing
DRM drivers. A call to drm_simple_encoder_create() allocates and
initializes an encoder instance, a call to drm_simple_encoder_init()
initializes a pre-allocated instance.

v3:
	* remove drm_simple_encoder_create(); not required yet
	* provide more precise documentation
v2:
	* move simple encoder to KMS helpers
	* remove name argument; simplifies implementation
	* don't allocate with devm_ interfaces; unsafe with DRM

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200228081828.18463-2-tzimmermann@suse.de
2020-03-02 09:22:35 +01:00
Laurent Pinchart
a25b988ff8 drm/bridge: Extend bridge API to disable connector creation
Most bridge drivers create a DRM connector to model the connector at the
output of the bridge. This model is historical and has worked pretty
well so far, but causes several issues:

- It prevents supporting more complex display pipelines where DRM
connector operations are split over multiple components. For instance a
pipeline with a bridge connected to the DDC signals to read EDID data,
and another one connected to the HPD signal to detect connection and
disconnection, will not be possible to support through this model.

- It requires every bridge driver to implement similar connector
handling code, resulting in code duplication.

- It assumes that a bridge will either be wired to a connector or to
another bridge, but doesn't support bridges that can be used in both
positions very well (although there is some ad-hoc support for this in
the analogix_dp bridge driver).

In order to solve these issues, ownership of the connector should be
moved to the display controller driver (where it can be implemented
using helpers provided by the core).

Extend the bridge API to allow disabling connector creation in bridge
drivers as a first step towards the new model. The new flags argument to
the bridge .attach() operation allows instructing the bridge driver to
skip creating a connector. Unconditionally set the new flags argument to
0 for now to keep the existing behaviour, and modify all existing bridge
drivers to return an error when connector creation is not requested as
they don't support this feature yet.

The change is based on the following semantic patch, with manual review
and edits.

@ rule1 @
identifier funcs;
identifier fn;
@@
 struct drm_bridge_funcs funcs = {
 	...,
 	.attach = fn
 };

@ depends on rule1 @
identifier rule1.fn;
identifier bridge;
statement S, S1;
@@
 int fn(
 	struct drm_bridge *bridge
+	, enum drm_bridge_attach_flags flags
 )
 {
 	... when != S
+	if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) {
+		DRM_ERROR("Fix bridge driver to make connector optional!");
+		return -EINVAL;
+	}
+
 	S1
 	...
 }

@ depends on rule1 @
identifier rule1.fn;
identifier bridge, flags;
expression E1, E2, E3;
@@
 int fn(
 	struct drm_bridge *bridge,
 	enum drm_bridge_attach_flags flags
 ) {
 <...
 drm_bridge_attach(E1, E2, E3
+	, flags
 )
 ...>
 }

@@
expression E1, E2, E3;
@@
 drm_bridge_attach(E1, E2, E3
+	, 0
 )

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-10-laurent.pinchart@ideasonboard.com
2020-02-26 13:31:23 +02:00
Daniel Vetter
62db7d1e1e drm/simple-kms: Standardize arguments for callbacks
Passing the wrong type feels icky, everywhere else we use the pipe as
the first parameter. Spotted while discussing patches with Thomas
Zimmermann.

v2: Make xen compile correctly

Acked-By: Thomas Zimmermann <tzimmermann@suse.de> (v1)
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Emil Velikov <emil.velikov@collabora.com>
Cc: virtualization@lists.linux-foundation.org
Cc: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191023101256.20509-1-daniel.vetter@ffwll.ch
2019-10-24 13:55:56 +02:00
Boris Brezillon
ee68c743f8 drm: Stop including drm_bridge.h from drm_crtc.h
We are about to add a drm_bridge_state that inherits from
drm_private_state which is defined in drm_atomic.h. Problem is,
drm_atomic.h includes drm_crtc.h which in turn includes drm_bridge.h,
leading to "drm_private_state has incomplete type" error.

Let's force all users of the drm_bridge API to explicitly include
drm_bridge.h.

Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190826152649.13820-2-boris.brezillon@collabora.com
2019-08-28 22:11:03 +02:00
Daniel Vetter
52d2d44eee Linux 5.2-rc5
-----BEGIN PGP SIGNATURE-----
 
 iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl0Gj1MeHHRvcnZhbGRz
 QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGctkH/0At3+SQPY2JJSy8
 i6+TDeytFx9OggeGLPHChRfehkAlvMb/kd34QHnuEvDqUuCAMU6HZQJFKoK9mvFI
 sDJVayPGDSqpm+iv8qLpMBPShiCXYVnGZeVfOdv36jUswL0k6wHV1pz4avFkDeZa
 1F4pmI6O2XRkNTYQawbUaFkAngWUCBG9ECLnHJnuIY6ohShBvjI4+E2JUaht+8gO
 M2h2b9ieddWmjxV3LTKgsK1v+347RljxdZTWnJ62SCDSEVZvsgSA9W2wnebVhBkJ
 drSmrFLxNiM+W45mkbUFmQixRSmjv++oRR096fxAnodBxMw0TDxE1RiMQWE6rVvG
 N6MC6xA=
 =+B0P
 -----END PGP SIGNATURE-----

Merge v5.2-rc5 into drm-next

Maarten needs -rc4 backmerged so he can pull in the fbcon notifier
removal topic branch into drm-misc-next.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2019-06-19 12:07:29 +02:00
Thomas Gleixner
2874c5fd28 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 3029 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30 11:26:32 -07:00
Sam Ravnborg
0500c04ea1 drm: drop use of drmP.h in drm/*
The use of the drmP.h header file is deprecated.
Remove use from all files in drm/*
so people do not look there and follow a bad example.

Build tested allyesconfig,allmodconfig on x86, arm etc.
Including alpha that is as always more challenging than
the rest.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Link: https://patchwork.freedesktop.org/patch/msgid/20190526173535.32701-8-sam@ravnborg.org
2019-05-27 18:07:03 +02:00
Daniel Vetter
fcd70cd36b drm: Split out drm_probe_helper.h
Having the probe helper stuff (which pretty much everyone needs) in
the drm_crtc_helper.h file (which atomic drivers should never need) is
confusing. Split them out.

To make sure I actually achieved the goal here I went through all
drivers. And indeed, all atomic drivers are now free of
drm_crtc_helper.h includes.

v2: Make it compile. There was so much compile fail on arm drivers
that I figured I'll better not include any of the acks on v1.

v3: Massive rebase because i915 has lost a lot of drmP.h includes, but
not all: Through drm_crtc_helper.h > drm_modeset_helper.h -> drmP.h
there was still one, which this patch largely removes. Which means
rolling out lots more includes all over.

This will also conflict with ongoing drmP.h cleanup by others I
expect.

v3: Rebase on top of atomic bochs.

v4: Review from Laurent for bridge/rcar/omap/shmob/core bits:
- (re)move some of the added includes, use the better include files in
  other places (all suggested from Laurent adopted unchanged).
- sort alphabetically

v5: Actually try to sort them, and while at it, sort all the ones I
touch.

v6: Rebase onto i915 changes.

v7: Rebase once more.

Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: CK Hu <ck.hu@mediatek.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: virtualization@lists.linux-foundation.org
Cc: etnaviv@lists.freedesktop.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: intel-gfx@lists.freedesktop.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-amlogic@lists.infradead.org
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: spice-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Cc: linux-renesas-soc@vger.kernel.org
Cc: linux-rockchip@lists.infradead.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-tegra@vger.kernel.org
Cc: xen-devel@lists.xen.org
Link: https://patchwork.freedesktop.org/patch/msgid/20190117210334.13234-1-daniel.vetter@ffwll.ch
2019-01-24 13:20:42 +01:00
Eric Anholt
dff906c3f9 drm/tinydrm: Advertise that we can do only DRM_FORMAT_MOD_LINEAR.
Without this, the xserver relies on what the 3D driver exposes and
assumes that the display can handle it, and then the DRM driver
happily tries to scan out a tiled format.

Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20181025162635.6689-1-eric@anholt.net
Acked-by: Noralf Trønnes <noralf@tronnes.org>
2018-10-30 13:01:50 -07:00
Daniel Vetter
cde4c44d87 drm: drop _mode_ from drm_mode_connector_attach_encoder
Again to align with the usual prefix of just drm_connector_. Again
done with sed + manual fixup for indent issues.

Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180709084016.23750-7-daniel.vetter@ffwll.ch
2018-07-13 18:40:27 +02:00
Ville Syrjälä
6a52193bd0 drm: Use drm_crtc_mask()
Use drm_crtc_mask() where appropriate.

Mostly performed with coccinelle:
@@
@@
- (1<<drm_crtc_index(
+ drm_crtc_mask(
  ...)
-  )

@@
@@
- 1<<drm_crtc_index(
+ drm_crtc_mask(
  ...)

@@
@@
- BIT(drm_crtc_index(
+ drm_crtc_mask(
  ...)
- )

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180626194716.12522-2-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-07-02 18:45:55 +03:00
Ville Syrjälä
62f77ad096 drm: Add drm_plane_mask()
Add drm_plane_mask() which returns the 1<<index for the plane.
We already have an identical drm_crtc_mask() for crtcs.

Mostly performed with coccinelle:
@@
@@
- (1<<drm_plane_index(
+ drm_plane_mask(
  ...)
-  )

@@
@@
- 1<<drm_plane_index(
+ drm_plane_mask(
  ...)

@@
@@
- BIT(drm_plane_index(
+ drm_plane_mask(
  ...)
- )

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180626194716.12522-1-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-07-02 18:45:55 +03:00
Ville Syrjälä
0c9c7fd00e drm/simple-kms-helper: Plumb plane state to the enable hook
tinydrm enable hook wants to play around with the new fb in
.atomic_enable(), thus we'll need access to the plane state.

Performed with coccinelle:
@r1@
identifier F =~ ".*enable$";
identifier P, CS;
@@
F(
	struct drm_simple_display_pipe *P
	,struct drm_crtc_state *CS
+	,struct drm_plane_state *plane_state
	)
{
...
}

@@
struct drm_simple_display_pipe *P;
expression E;
@@
{
+ struct drm_plane *plane;
...
+ plane = &P->plane;
P->funcs->enable(P
		,E
+		,plane->state
	);
...
}

@@
identifier P, CS;
@@
struct drm_simple_display_pipe_funcs {
...
        void (*enable)(struct drm_simple_display_pipe *P
	     		,struct drm_crtc_state *CS
+			,struct drm_plane_state *plane_state
		);
...
};

v2: Pimp the commit message (David)

Cc: Marek Vasut <marex@denx.de>
Cc: Eric Anholt <eric@anholt.net>
Cc: David Lechner <david@lechnology.com>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180322202738.25817-1-ville.syrjala@linux.intel.com
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
2018-03-28 19:19:32 +03:00
Ville Syrjälä
81af63a4af drm: Don't pass clip to drm_atomic_helper_check_plane_state()
Move the plane clip rectangle handling into
drm_atomic_helper_check_plane_state(). Drivers no longer
have to worry about such mundane details.

v2: Convert armada, rcar, and sun4i as well
v3: Resolve simple_kms_helper conflict

Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Cc: Mali DP Maintainers <malidp@foss.arm.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: CK Hu <ck.hu@mediatek.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Sandy Huang <hjc@rock-chips.com>
Cc: "Heiko Stübner" <heiko@sntech.de>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Sinclair Yeh <syeh@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: linux-amlogic@lists.infradead.org
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: linux-renesas-soc@vger.kernel.org
Cc: linux-tegra@vger.kernel.org
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org> #msm
Link: https://patchwork.freedesktop.org/patch/msgid/20180123170857.13818-5-ville.syrjala@linux.intel.com
Acked-by: Liviu Dudau <liviu.dudau@arm.com> #hdlcd,malidp
Acked-by: Philipp Zabel <p.zabel@pengutronix.de> #imx,mtk
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com> #vmwgfx
Acked-by: Neil Armstrong <narmstrong@baylibre.com> #meson
Acked-by: Shawn Guo <shawnguo@kernel.org> #zte
2018-03-05 20:48:25 +02:00
Oleksandr Andrushchenko
ac86cba96e drm/simple_kms_helper: Add {enable|disable}_vblank callback support
If simple_kms_helper based driver needs to work with vblanks,
then it has to provide drm_driver.{enable|disable}_vblank callbacks,
because drm_simple_kms_helper.drm_crtc_funcs does not provide any.
At the same time drm_driver.{enable|disable}_vblank callbacks
are marked as deprecated and shouldn't be used by new drivers.

Fix this by extending drm_simple_kms_helper.drm_crtc_funcs
to provide the missing callbacks.

Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1518425574-32671-2-git-send-email-andr2000@gmail.com
2018-02-22 17:58:59 +01:00
Oleksandr Andrushchenko
4751cf733a drm/simple_kms_helper: Fix NULL pointer dereference with no active CRTC
It is possible that drm_simple_kms_plane_atomic_check called
with no CRTC set, e.g. when user-space application sets CRTC_ID/FB_ID
to 0 before doing any actual drawing. This leads to NULL pointer
dereference because in this case new CRTC state is NULL and must be
checked before accessing.

Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1519279759-7803-1-git-send-email-andr2000@gmail.com
2018-02-22 17:11:46 +01:00
Linus Walleij
40275dc4ed drm: simple_kms_helper: Add mode_valid() callback support
The PL111 needs to filter valid modes based on memory bandwidth.
I guess it is a pretty simple operation, so we can still claim
the DRM KMS helper pipeline is simple after adding this (optional)
vtable callback.

Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180220072859.3386-1-linus.walleij@linaro.org
2018-02-20 08:42:17 +01:00
Ville Syrjälä
bb4dd71a75 drm/simple_kms_helper: Use drm_mode_get_hv_timing() to populate plane clip rectangle
Use drm_mode_get_hv_timing() to fill out the plane clip rectangle.

Note that this replaces crtc_state->adjusted_mode usage with
crtc_state->mode. The latter is the correct choice since that's the
mode the user provided and it matches the plane crtc coordinates
the user also provided.

Once everyone agrees on this we can move the clip handling into
drm_atomic_helper_check_plane_state().

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171123190502.28449-6-ville.syrjala@linux.intel.com
Reviewed-by: Thierry Reding <treding@nvidia.com>
2018-01-23 17:41:40 +02:00
Ville Syrjälä
a01cb8ba3f drm: Move drm_plane_helper_check_state() into drm_atomic_helper.c
drm_plane_helper_check_update() isn't a transitional helper, so let's
rename it to drm_atomic_helper_check_plane_state() and move it into
drm_atomic_helper.c.

v2: Fix the WARNs about plane_state->crtc matching crtc_state->crtc

Cc: Daniel Vetter <daniel@ffwll.ch>
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171101201619.6175-1-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2017-11-20 21:14:22 +02:00
Ville Syrjälä
10b47ee02d drm: Check crtc_state->enable rather than crtc->enabled in drm_plane_helper_check_state()
drm_plane_helper_check_state() is supposed to do things the atomic way,
so it should not be inspecting crtc->enabled. Rather we should be
looking at crtc_state->enable.

We have a slight complication due to drm_plane_helper_check_update()
reusing drm_plane_helper_check_state() for non-atomic drivers. Thus
we'll have to pass the crtc_state in manally and construct a fake
crtc_state in drm_plane_helper_check_update().

v2: Fix the WARNs about plane_state->crtc matching crtc_state->crtc

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171101201558.6059-1-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2017-11-20 20:33:21 +02:00
Ben Widawsky
e6fc3b6855 drm: Plumb modifiers through plane init
This is the plumbing for supporting fb modifiers on planes. Modifiers
have already been introduced to some extent, but this series will extend
this to allow querying modifiers per plane. Based on this, the client to
enable optimal modifications for framebuffers.

This patch simply allows the DRM drivers to initialize their list of
supported modifiers upon initializing the plane.

v2: A minor addition from Daniel

v3:
* Updated commit message
* s/INVALID/DRM_FORMAT_MOD_INVALID (Liviu)
* Remove some excess newlines (Liviu)
* Update comment for > 64 modifiers (Liviu)

v4: Minor comment adjustments (Liviu)

v5: Some new platforms added due to rebase

v6: Add some missed plane inits (or maybe they're new - who knows at
this point) (Daniel)

Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Daniel Stone <daniels@collabora.com> (v2)
Reviewed-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Daniel Stone <daniels@collabora.com>
2017-08-01 17:50:06 +01:00
Maarten Lankhorst
765831dc27 drm/simple-kms-helper: Fix the check for the mismatch between plane and CRTC enabled.
You can enable the CRTC and without adding the plane to the state and
it will succeed. This should be prevented in the crtc check instead of
the plane check, because the plane check may never run for atomic
enable, but the crtc check always will.

This is based on a similar check in vmwgfx.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: David Airlie <airlied@linux.ie>
Link: http://patchwork.freedesktop.org/patch/msgid/20170712081344.25495-2-maarten.lankhorst@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2017-07-13 09:44:51 +02:00
Laurent Pinchart
64581714b5 drm: Convert atomic drivers from CRTC .disable() to .atomic_disable()
The CRTC .disable() helper operation is deprecated for atomic drivers,
the new .atomic_disable() helper operation being preferred. Convert all
atomic drivers to .atomic_disable() to avoid cargo-cult use of
.disable() in new drivers.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> # for sun4i
Acked-by: Philipp Zabel <p.zabel@pengutronix.de> # for mediatek
Acked-by: Alexey Brodkin <abrodkin@synopsys.com> # for arcpgu
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> # for atmel-hlcdc
Tested-by: Philippe Cornu <philippe.cornu@st.com> # for stm
Acked-by: Philippe Cornu <philippe.cornu@st.com> # for stm
Acked-by: Vincent Abriou <vincent.abriou@st.com> # for sti
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> # for vmwgfx
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170630093646.7928-3-laurent.pinchart+renesas@ideasonboard.com
2017-06-30 14:53:15 +02:00
Laurent Pinchart
0b20a0f8c3 drm: Add old state pointer to CRTC .enable() helper function
The old state is useful for drivers that need to perform operations at
enable time that depend on the transition between the old and new
states.

While at it, rename the operation to .atomic_enable() to be consistent
with .atomic_disable(), as the .enable() operation is used by atomic
helpers only.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> # for sun4i
Acked-by: Philipp Zabel <p.zabel@pengutronix.de> # for imx-drm and mediatek
Acked-by: Alexey Brodkin <abrodkin@synopsys.com> # for arcpgu
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> # for atmel-hlcdc
Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> # for hdlcd and mali-dp
Acked-by: Stefan Agner <stefan@agner.ch> # for fsl-dcu
Tested-by: Philippe Cornu <philippe.cornu@st.com> # for stm
Acked-by: Philippe Cornu <philippe.cornu@st.com> # for stm
Acked-by: Vincent Abriou <vincent.abriou@st.com> # for sti
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> # for vmwgfx
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170630093646.7928-2-laurent.pinchart+renesas@ideasonboard.com
2017-06-30 14:53:14 +02:00
Eric Anholt
bcd2ba02a4 drm: Clarify the role of plane_state argument to drm_simple update().
Like the atomic update hook it's wrapping, the plane_state is the old
one, and the new one is in plane->state.  Both msxfb and tinydrm use
it correctly, but I mistook it for the new state in pl111 due to its
naming.

Signed-off-by: Eric Anholt <eric@anholt.net>
Link: http://patchwork.freedesktop.org/patch/msgid/20170320233615.5242-3-eric@anholt.net
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2017-03-30 12:02:00 -07:00
Maarten Lankhorst
b4d93679d0 drm/atomic: Convert get_existing_state callers to get_old/new_state, v4.
This is a straightforward conversion that converts all the users of
get_existing_state in atomic core to use get_old_state or get_new_state

Changes since v1:
- Fix using the wrong state in drm_atomic_helper_update_legacy_modeset_state.
Changes since v2:
- Use the correct state in disable_outputs()
Changes since v3:
- Rebase for link status training.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/df91a9f9-005e-bcbd-1f74-03c38e1e21dd@linux.intel.com
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2017-03-06 11:43:05 +01:00
Daniel Vetter
ea0dd85a75 drm/doc: use preferred struct reference in kernel-doc
sed -e 's/\( \* .*\)struct &\([_a-z]*\)/\1\&struct \2/' -i

Originally I wasnt a friend of this style because I thought a
line-break between the "&struct" and "foo" part would break it. But a
quick test shows that " * &struct \n * foo\n" works pefectly well with
current kernel-doc. So time to mass-apply these changes!

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1483044517-5770-6-git-send-email-daniel.vetter@ffwll.ch
2016-12-30 13:34:59 +01:00
Laurent Pinchart
4a878c03d5 drm: bridge: Detach bridge from encoder at encoder cleanup time
Most drivers that use bridges forgot to detach them at cleanup time.
Instead of fixing them one by one, detach the bridge in the core
drm_encoder_cleanup() function.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1481709550-29226-5-git-send-email-laurent.pinchart+renesas@ideasonboard.com
2016-12-18 16:32:49 +05:30
Laurent Pinchart
3bb80f2495 drm: bridge: Link encoder and bridge in core code
Instead of linking encoders and bridges in every driver (and getting it
wrong half of the time, as many drivers forget to set the drm_bridge
encoder pointer), do so in core code. The drm_bridge_attach() function
needs the encoder and optional previous bridge to perform that task,
update all the callers.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Stefan Agner <stefan@agner.ch> # For DCU
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> # For atmel-hlcdc
Acked-by: Vincent Abriou <vincent.abriou@st.com> # For STI
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> # For sun4i
Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com> # For hisilicon
Acked-by: Jyri Sarha <jsarha@ti.com> # For tilcdc
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1481709550-29226-4-git-send-email-laurent.pinchart+renesas@ideasonboard.com
2016-12-18 16:31:45 +05:30
Marek Vasut
7d83a155f0 drm: simple_kms_helper: Add prepare_fb and cleanup_fb hooks
Add .prepare_fb and .cleanup_fb plane hooks into the drm_simple_kms.
These can be used by drivers to call ie. the drm_fb_cma_setup_fence()
helper.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161002170124.6099-1-marex@denx.de
2016-10-05 15:18:02 +02:00
Andrea Merello
315486c665 drm: simple_kms_helper: add support for bridges
Introduce drm_simple_display_pipe_attach_bridge() and
drm_simple_display_pipe_detach_bridge() in order to make it possible to use
drm encoders with the simple display pipes managed by simple_kms_helpers

Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1472115874-6219-3-git-send-email-andrea.merello@gmail.com
2016-08-29 09:15:37 +05:30
Andrea Merello
4f993973d2 drm: simple_kms_helper: make connector optional at init time
drm_simple_display_pipe_init() pretends to attach a connector
to the display pipe.

In case a drm bridge has to be used, then it's the bridge that
takes care of connectors.

This patch makes the connector parameter optional for
drm_simple_display_pipe_init(), so that a drm bridge could
handle connector by itself later.

Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1472115874-6219-2-git-send-email-andrea.merello@gmail.com
2016-08-29 09:13:52 +05:30
Daniel Vetter
6dcf0de7ef drm/simple-helpers: Always add planes to the state update
Our update function is hooked to the single plane, which might not get
called for crtc-only updates. Which is surprising, so fix this by
always adding the plane.

While at it document how&when the event should be sent out better in
the kerneldoc.

Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: andrea.merello@gmail.com
Tested-and-Reported-by: andrea.merello@gmail.com
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1471933540-31131-1-git-send-email-daniel.vetter@ffwll.ch
2016-08-25 20:46:03 +02:00
Daniel Vetter
62cacc7939 drm/doc: Fix more kerneldoc/sphinx warnings
These are the leftovers I could only track down using keep_warnings =
True. For some of them we might want to update our style guide on how
to reference structures and constants, not sure ...

Cc: Markus Heiser <markus.heiser@darmarit.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471034937-651-1-git-send-email-daniel.vetter@ffwll.ch
2016-08-16 16:09:58 +02:00
Ville Syrjälä
4be12cc23d drm/simple_kms_helper: Use drm_plane_helper_check_state()
Replace the use of drm_plane_helper_check_update() with
drm_plane_helper_check_state() since we have a plane state.

I don't see any actual users of drm_simple_kms_helper yet, so
no actual plane clipping bugs to fix.

Cc: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1469549224-1860-10-git-send-email-ville.syrjala@linux.intel.com
2016-08-08 14:19:58 -04:00
Ville Syrjälä
9b8b013dde drm: Deal with rotation in drm_plane_helper_check_update()
drm_plane_helper_check_update() needs to account for the plane rotation
for correct clipping/scaling calculations. Do so.

There was an earlier attempt [1] to add this into
intel_check_primary_plane() but I requested that it'd be put into the
helper instead. An updated patch never materialized AFAICS, so I went
ahead and cooked one up myself.

v2: Deal with new drm_plane_helper_check_update() callers

[1] https://patchwork.freedesktop.org/patch/65177/
Cc: Nabendu Maiti <nabendu.bikash.maiti@intel.com>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: CK Hu <ck.hu@mediatek.com>
Cc: Mark Yao <mark.yao@rock-chips.com>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1466172790-10025-1-git-send-email-ville.syrjala@linux.intel.com
2016-06-17 16:41:25 +02:00
Noralf Trønnes
5b8090747a drm: Add helper for simple display pipeline
Provides helper functions for drivers that have a simple display
pipeline. Plane, crtc and encoder are collapsed into one entity.

Changes since v4:
- Remove drm_connector_register() call
- Forgot to assign pipe->connector

Changes since v3:
- (struct drm_simple_display_pipe *)->funcs should be const

Changes since v2:
- Drop Kconfig knob DRM_KMS_HELPER
- Expand documentation

Changes since v1:
- Add DOC header and add to gpu.tmpl
- Fix docs: @funcs is optional, "negative error code",
  "This hook is optional."
- Add checks to drm_simple_kms_plane_atomic_check()

Cc: jsarha@ti.com
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465570559-14238-1-git-send-email-noralf@tronnes.org
2016-06-10 17:33:17 +02:00