Currently, in struct extent_map, we use an unsigned int (32 bits) to
identify the compression type of an extent and an unsigned long (64 bits
on a 64 bits platform, 32 bits otherwise) for flags. We are only using
6 different flags, so an unsigned long is excessive and we can use flags
to identify the compression type instead of using a dedicated 32 bits
field.
We can easily have tens or hundreds of thousands (or more) of extent maps
on busy and large filesystems, specially with compression enabled or many
or large files with tons of small extents. So it's convenient to have the
extent_map structure as small as possible in order to use less memory.
So remove the compression type field from struct extent_map, use flags
to identify the compression type and shorten the flags field from an
unsigned long to a u32. This saves 8 bytes (on 64 bits platforms) and
reduces the size of the structure from 136 bytes down to 128 bytes, using
now only two cache lines, and increases the number of extent maps we can
have per 4K page from 30 to 32. By using a u32 for the flags instead of
an unsigned long, we no longer use test_bit(), set_bit() and clear_bit(),
but that level of atomicity is not needed as most flags are never cleared
once set (before adding an extent map to the tree), and the ones that can
be cleared or set after an extent map is added to the tree, are always
performed while holding the write lock on the extent map tree, while the
reader holds a lock on the tree or tests for a flag that never changes
once the extent map is in the tree (such as compression flags).
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At unpin_extent_range() we trigger a WARN_ON() when we don't find an
extent map or we find one with a start offset not matching the start
offset of the target range. This however isn't very useful for debugging
because:
1) We don't know which condition was triggered, as they are both in the
same WARN_ON() call;
2) We don't know which inode was affected, from which root, for which
range, what's the start offset of the extent map, and so on.
So trigger a separate warning for each case and log a message for each
case providing information about the inode, its root, the target range,
the generation and the start offset of the extent map we found.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The file_extent_tree was added in 41a2ee75aa ("btrfs: introduce
per-inode file extent tree") so we have an explicit mapping of the file
extents to know where it is safe to update i_size. When the feature
NO_HOLES is enabled, and it's been a mkfs default since 5.15, the tree
is not necessary.
To save some space in the inode, allocate the tree only when necessary.
This reduces size by 16 bytes from 1096 to 1080 on a x86_64 release
config.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When profiling a workload I noticed we were constantly calling getxattr.
These were mostly coming from __remove_privs, which will lookup if
security.capability exists to remove it. However instrumenting getxattr
showed we get called nearly constantly on an idle machine on a lot of
accesses.
These are wasteful and not free. Other security LSMs have a way to
cache their results, but capability doesn't have this, so it's asking us
all the time for the xattr.
Fix this by setting a flag in our inode that it doesn't have a
security.capability xattr. We set this on new inodes and after a failed
lookup of security.capability. If we set this xattr at all we'll clear
the flag.
I haven't found a test in fsperf that this makes a visible difference
on, but I assume fs_mark related tests would show it clearly. This is a
perf report output of the smallfiles100k run where it shows 20% of our
time spent in __remove_privs because we're looking up the non-existent
xattr.
--21.86%--btrfs_write_check.constprop.0
--21.62%--__file_remove_privs
--21.55%--security_inode_need_killpriv
--21.54%--cap_inode_need_killpriv
--21.53%--__vfs_getxattr
--20.89%--btrfs_getxattr
Obviously this is just CPU time in a mostly IO bound test, so the actual
effect of removing this callchain is minimal. However in just normal
testing of an idle system tracing showed around 100 getxattr calls per
minute, and with this patch there are 0.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The extent_io_tree is embedded in several structures, notably in struct
btrfs_inode. The fs_info is only used for reporting errors and for
reference in trace points. We can get to the pointer through the inode,
but not all io trees set it. However, we always know the owner and
can recognize if inode is valid. For access helpers are provided, const
variant for the trace points.
This reduces size of extent_io_tree by 8 bytes and following structures
in turn:
- btrfs_inode 1104 -> 1088
- btrfs_device 520 -> 512
- btrfs_root 1360 -> 1344
- btrfs_transaction 456 -> 440
- btrfs_fs_info 3600 -> 3592
- reloc_control 1520 -> 1512
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The per-inode file extent tree was added in 41a2ee75aa ("btrfs:
introduce per-inode file extent tree"), it's the only tree type
that requires the lockdep class. Move it to the file where it is
actually used.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently we abuse the extent_map structure for two purposes:
1) To actually represent extents for inodes;
2) To represent chunk mappings.
This is odd and has several disadvantages:
1) To create a chunk map, we need to do two memory allocations: one for
an extent_map structure and another one for a map_lookup structure, so
more potential for an allocation failure and more complicated code to
manage and link two structures;
2) For a chunk map we actually only use 3 fields (24 bytes) of the
respective extent map structure: the 'start' field to have the logical
start address of the chunk, the 'len' field to have the chunk's size,
and the 'orig_block_len' field to contain the chunk's stripe size.
Besides wasting a memory, it's also odd and not intuitive at all to
have the stripe size in a field named 'orig_block_len'.
We are also using 'block_len' of the extent_map structure to contain
the chunk size, so we have 2 fields for the same value, 'len' and
'block_len', which is pointless;
3) When an extent map is associated to a chunk mapping, we set the bit
EXTENT_FLAG_FS_MAPPING on its flags and then make its member named
'map_lookup' point to the associated map_lookup structure. This means
that for an extent map associated to an inode extent, we are not using
this 'map_lookup' pointer, so wasting 8 bytes (on a 64 bits platform);
4) Extent maps associated to a chunk mapping are never merged or split so
it's pointless to use the existing extent map infrastructure.
So add a dedicated data structure named 'btrfs_chunk_map' to represent
chunk mappings, this is basically the existing map_lookup structure with
some extra fields:
1) 'start' to contain the chunk logical address;
2) 'chunk_len' to contain the chunk's length;
3) 'stripe_size' for the stripe size;
4) 'rb_node' for insertion into a rb tree;
5) 'refs' for reference counting.
This way we do a single memory allocation for chunk mappings and we don't
waste memory for them with unused/unnecessary fields from an extent_map.
We also save 8 bytes from the extent_map structure by removing the
'map_lookup' pointer, so the size of struct extent_map is reduced from
144 bytes down to 136 bytes, and we can now have 30 extents map per 4K
page instead of 28.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
As a cleanup and preparation for future folio migration, this patch
would replace all page->private to folio version. This includes:
- PagePrivate()
-> folio_test_private()
- page->private
-> folio_get_private()
- attach_page_private()
-> folio_attach_private()
- detach_page_private()
-> folio_detach_private()
Since we're here, also remove the forced cast on page->private, since
it's (void *) already, we don't really need to do the cast.
For now even if we missed some call sites, it won't cause any problem
yet, as we're only using order 0 folio (single page), thus all those
folio/page flags should be synced.
But for the future conversion to utilize higher order folio, the page
<-> folio flag sync is no longer guaranteed, thus we have to migrate to
utilize folio flags.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is a preparation for managing compression pages in a cache-like
manner, instead of asking the allocator each time. The common allocation
and free wrappers are introduced and are functionally equivalent to the
current code.
The freeing helpers need to be carefully placed where the last reference
is dropped. This is either after directly allocating (error handling)
or when there are no other users of the pages (after copying the contents).
It's safe to not use the helper and use put_page() that will handle the
reference count. Not using the helper means there's lower number of
pages that could be reused without passing them back to allocator.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----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=uF/Q
-----END PGP SIGNATURE-----
Merge tag 'for-6.7-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"Some fixes to quota accounting code, mostly around error handling and
correctness:
- free reserves on various error paths, after IO errors or
transaction abort
- don't clear reserved range at the folio release time, it'll be
properly cleared after final write
- fix integer overflow due to int used when passing around size of
freed reservations
- fix a regression in squota accounting that missed some cases with
delayed refs"
* tag 'for-6.7-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: ensure releasing squota reserve on head refs
btrfs: don't clear qgroup reserved bit in release_folio
btrfs: free qgroup pertrans reserve on transaction abort
btrfs: fix qgroup_free_reserved_data int overflow
btrfs: free qgroup reserve when ORDERED_IOERR is set
The reserved data counter and input parameter is a u64, but we
inadvertently accumulate it in an int. Overflowing that int results in
freeing the wrong amount of data and breaking reserve accounting.
Unfortunately, this overflow rot spreads from there, as the qgroup
release/free functions rely on returning an int to take advantage of
negative values for error codes.
Therefore, the full fix is to return the "released" or "freed" amount by
a u64 argument and to return 0 or negative error code via the return
value.
Most of the call sites simply ignore the return value, though some
of them handle the error and count the returned bytes. Change all of
them accordingly.
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE8rQSAMVO+zA4DBdWxWXV+ddtWDsFAmVSO50ACgkQxWXV+ddt
WDuiyg/7BZviFAyiQMAzpA319qRJZ+EemfTdF/k69q4axGYuvqVdXKnpOV44AR4I
dKcHLOPpDZIxsh8lFytkm1UEAHptw1v7A64c+gcdjGK0tAA7aKbw/1nmNysowT23
L0v2+34hkBUfG8A3uVgOwL1rjItEX5Fl54slpVsazSqlEbKrqC4MGNjmqdp3IOeC
qfXTgkvkXmm8s8NyoJybKewM9Aw0tmK0jkAFHA+2sgcZPYKXjqWGv9KUOsXnCx5o
3kPWIRT1sj4q2qzrgP14Q12O6qPLZ2/0oTBhi6nhj8+N1yiH+USS5zBITegF+w2n
leQeVHtyBYHlPYQSQlCIZy7+10gkePvs+JmoAuL8YFISnGYnvOZqCeArlV7cnNI3
CQt7ZBER5Dqw78Y756usUhpYrLWa9kOpcPVRmjJ/R62+TY1FkkyY7irETbn5EGjI
NlhEa4PMYeYpAOccoxWEm9tIiiVD1abURhVBdn3Znfcb1Sv/lrGBlo9DYGFCxbBh
xU1JP7sly8w0aPLqCbn1X3VY8dXp+CeYz4FQabHjQA/zr9lF08/pRYj3haAbYAyH
0KphXurwz/YqY+LmRg7SbQ/KMgBAiBV8Qk9JyNvdvaQbnYnq7CWdpoHcpZu3mvpb
HLGoXew58kZaSfxLHlcT5wwYlbq0rooXRstuFg2+BBcOFOMCQfw=
=GM+1
-----END PGP SIGNATURE-----
Merge tag 'for-6.7-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix potential overflow in returned value from SEARCH_TREE_V2
ioctl on 32bit architecture
- zoned mode fixes:
- drop unnecessary write pointer check for RAID0/RAID1/RAID10
profiles, now it works because of raid-stripe-tree
- wait for finishing the zone when direct IO needs a new
allocation
- simple quota fixes:
- pass correct owning root pointer when cleaning up an
aborted transaction
- fix leaking some structures when processing delayed refs
- change key type number of BTRFS_EXTENT_OWNER_REF_KEY,
reorder it before inline refs that are supposed to be
sorted, keeping the original number would complicate a lot
of things; this change needs an updated version of
btrfs-progs to work and filesystems need to be recreated
- fix error pointer dereference after failure to allocate fs
devices
- fix race between accounting qgroup extents and removing a
qgroup
* tag 'for-6.7-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: make OWNER_REF_KEY type value smallest among inline refs
btrfs: fix qgroup record leaks when using simple quotas
btrfs: fix race between accounting qgroup extents and removing a qgroup
btrfs: fix error pointer dereference after failure to allocate fs devices
btrfs: make found_logical_ret parameter mandatory for function queue_scrub_stripe()
btrfs: get correct owning_root when dropping snapshot
btrfs: zoned: wait for data BG to be finished on direct IO allocation
btrfs: zoned: drop no longer valid write pointer check
btrfs: directly return 0 on no error code in btrfs_insert_raid_extent()
btrfs: use u64 for buffer sizes in the tree search ioctls
Running the fio command below on a ZNS device results in "Resource
temporarily unavailable" error.
$ sudo fio --name=w --directory=/mnt --filesize=1GB --bs=16MB --numjobs=16 \
--rw=write --ioengine=libaio --iodepth=128 --direct=1
fio: io_u error on file /mnt/w.2.0: Resource temporarily unavailable: write offset=117440512, buflen=16777216
fio: io_u error on file /mnt/w.2.0: Resource temporarily unavailable: write offset=134217728, buflen=16777216
...
This happens because -EAGAIN error returned from btrfs_reserve_extent()
called from btrfs_new_extent_direct() is spilling over to the userland.
btrfs_reserve_extent() returns -EAGAIN when there is no active zone
available. Then, the caller should wait for some other on-going IO to
finish a zone and retry the allocation.
This logic is already implemented for buffered write in cow_file_range(),
but it is missing for the direct IO counterpart. Implement the same logic
for it.
Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Fixes: 2ce543f478 ("btrfs: zoned: wait until zone is finished when allocation didn't progress")
CC: stable@vger.kernel.org # 6.1+
Tested-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----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=9TVx
-----END PGP SIGNATURE-----
Merge tag 'for-6.7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"New features:
- raid-stripe-tree
New tree for logical file extent mapping where the physical mapping
may not match on multiple devices. This is now used in zoned mode
to implement RAID0/RAID1* profiles, but can be used in non-zoned
mode as well. The support for RAID56 is in development and will
eventually fix the problems with the current implementation. This
is a backward incompatible feature and has to be enabled at mkfs
time.
- simple quota accounting (squota)
A simplified mode of qgroup that accounts all space on the initial
extent owners (a subvolume), the snapshots are then cheap to create
and delete. The deletion of snapshots in fully accounting qgroups
is a known CPU/IO performance bottleneck.
The squota is not suitable for the general use case but works well
for containers where the original subvolume exists for the whole
time. This is a backward incompatible feature as it needs extending
some structures, but can be enabled on an existing filesystem.
- temporary filesystem fsid (temp_fsid)
The fsid identifies a filesystem and is hard coded in the
structures, which disallows mounting the same fsid found on
different devices.
For a single device filesystem this is not strictly necessary, a
new temporary fsid can be generated on mount e.g. after a device is
cloned. This will be used by Steam Deck for root partition A/B
testing, or can be used for VM root images.
Other user visible changes:
- filesystems with partially finished metadata_uuid conversion cannot
be mounted anymore and the uuid fixup has to be done by btrfs-progs
(btrfstune).
Performance improvements:
- reduce reservations for checksum deletions (with enabled free space
tree by factor of 4), on a sample workload on file with many
extents the deletion time decreased by 12%
- make extent state merges more efficient during insertions, reduce
rb-tree iterations (run time of critical functions reduced by 5%)
Core changes:
- the integrity check functionality has been removed, this was a
debugging feature and removal does not affect other integrity
checks like checksums or tree-checker
- space reservation changes:
- more efficient delayed ref reservations, this avoids building up
too much work or overusing or exhausting the global block
reserve in some situations
- move delayed refs reservation to the transaction start time,
this prevents some ENOSPC corner cases related to exhaustion of
global reserve
- improvements in reducing excessive reservations for block group
items
- adjust overcommit logic in near full situations, account for one
more chunk to eventually allocate metadata chunk, this is mostly
relevant for small filesystems (<10GiB)
- single device filesystems are scanned but not registered (except
seed devices), this allows temp_fsid to work
- qgroup iterations do not need GFP_ATOMIC allocations anymore
- cleanups, refactoring, reduced data structure size, function
parameter simplifications, error handling fixes"
* tag 'for-6.7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (156 commits)
btrfs: open code timespec64 in struct btrfs_inode
btrfs: remove redundant log root tree index assignment during log sync
btrfs: remove redundant initialization of variable dirty in btrfs_update_time()
btrfs: sysfs: show temp_fsid feature
btrfs: disable the device add feature for temp-fsid
btrfs: disable the seed feature for temp-fsid
btrfs: update comment for temp-fsid, fsid, and metadata_uuid
btrfs: remove pointless empty log context list check when syncing log
btrfs: update comment for struct btrfs_inode::lock
btrfs: remove pointless barrier from btrfs_sync_file()
btrfs: add and use helpers for reading and writing last_trans_committed
btrfs: add and use helpers for reading and writing fs_info->generation
btrfs: add and use helpers for reading and writing log_transid
btrfs: add and use helpers for reading and writing last_log_commit
btrfs: support cloned-device mount capability
btrfs: add helper function find_fsid_by_disk
btrfs: stop reserving excessive space for block group item insertions
btrfs: stop reserving excessive space for block group item updates
btrfs: reorder btrfs_inode to fill gaps
btrfs: open code btrfs_ordered_inode_tree in btrfs_inode
...
The type of timespec64::tv_nsec is 'unsigned long', while we have only
u32 for on-disk and in-memory. This wastes a few bytes in btrfs_inode.
Add separate members for sec and nsec with the corresponding type width.
This creates a 4 byte hole in btrfs_inode which can be utilized in the
future.
Signed-off-by: David Sterba <dsterba@suse.com>
The variable dirty is initialized with a value that is never read, it
is being re-assigned later on. Remove the redundant initialization.
Cleans up clang scan build warning:
fs/btrfs/inode.c:5965:7: warning: Value stored to 'dirty' during its
initialization is never read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently the generation field of struct btrfs_fs_info is always modified
while holding fs_info->trans_lock locked. Most readers will access this
field without taking that lock but while holding a transaction handle,
which is safe to do due to the transaction life cycle.
However there are other readers that are neither holding the lock nor
holding a transaction handle open:
1) When reading an inode from disk, at btrfs_read_locked_inode();
2) When reading the generation to expose it to sysfs, at
btrfs_generation_show();
3) Early in the fsync path, at skip_inode_logging();
4) When creating a hole at btrfs_cont_expand(), during write paths,
truncate and reflinking;
5) In the fs_info ioctl (btrfs_ioctl_fs_info());
6) While mounting the filesystem, in the open_ctree() path. In these
cases it's safe to directly read fs_info->generation as no one
can concurrently start a transaction and update fs_info->generation.
In case of the fsync path, races here should be harmless, and in the worst
case they may cause a fsync to log an inode when it's not really needed,
so nothing bad from a functional perspective. In the other cases it's not
so clear if functional problems may arise, though in case 1 rare things
like a load/store tearing [1] may cause the BTRFS_INODE_NEEDS_FULL_SYNC
flag not being set on an inode and therefore result in incorrect logging
later on in case a fsync call is made.
To avoid data race warnings from tools like KCSAN and other issues such
as load and store tearing (amongst others, see [1]), create helpers to
access the generation field of struct btrfs_fs_info using READ_ONCE() and
WRITE_ONCE(), and use these helpers where needed.
[1] https://lwn.net/Articles/793253/
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The structure btrfs_ordered_inode_tree is used only in one place, in
btrfs_inode. The structure itself has a 4 byte hole which is wasted
space.
Move the btrfs_ordered_inode_tree members to btrfs_inode with a common
prefix 'ordered_tree_' where the hole can be utilized and shrink inode
size.
Signed-off-by: David Sterba <dsterba@suse.com>
The semantics of test_range_bit() with filled == 0 is now in it's own
helper so test_range_bit will check the whole range unconditionally.
The detection logic is flipped and assumes success by default and
catches exceptions.
Signed-off-by: David Sterba <dsterba@suse.com>
The existing helper test_range_bit works in two ways, checks if the whole
range contains all the bits, or stop on the first occurrence. By adding
a specific helper for the latter case, the inner loop can be simplified
and contains fewer conditionals, making it a bit faster.
There's no caller that uses the cached state pointer so this reduces the
argument count further.
Signed-off-by: David Sterba <dsterba@suse.com>
The root argument for maybe_insert_hole() always matches the root of the
given inode, so remove the root argument and get it from the inode
argument.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The root argument for btrfs_delayed_update_inode() always matches the root
of the given inode, so remove the root argument and get it from the inode
argument.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The root argument for btrfs_update_inode_item() always matches the root of
the given inode, so remove the root argument and get it from the inode
argument.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The root argument for btrfs_update_inode() always matches the root of the
given inode, so remove the root argument and get it from the inode
argument.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The root argument for btrfs_update_inode_fallback() always matches the
root of the given inode, so remove the root argument and get it from the
inode argument.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The noinline attribute of btrfs_update_inode() is pointless as the
function is exported and widely used, so remove it.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The following condition at btrfs_dirty_inode() is redundant:
if (ret && (ret == -ENOSPC || ret == -EDQUOT))
The first check for a non-zero 'ret' value is pointless, we can simplify
this to simply:
if (ret == -ENOSPC || ret == -EDQUOT)
Not only this makes it easier to read, it also slightly reduces the text
size of the btrfs kernel module:
$ size fs/btrfs/btrfs.ko.before
text data bss dec hex filename
1641400 168265 16864 1826529 1bdee1 fs/btrfs/btrfs.ko.before
$ size fs/btrfs/btrfs.ko.after
text data bss dec hex filename
1641224 168181 16864 1826269 1bdddd fs/btrfs/btrfs.ko.after
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are two callbacks defined in btrfs_work but only two actually make
use of them, otherwise there are NULLs. We can get rid of the freeing
callback making it a special case of the normal work. This reduces the
size of btrfs_work by 8 bytes, final layout:
struct btrfs_work {
btrfs_func_t func; /* 0 8 */
btrfs_ordered_func_t ordered_func; /* 8 8 */
struct work_struct normal_work; /* 16 32 */
struct list_head ordered_list; /* 48 16 */
/* --- cacheline 1 boundary (64 bytes) --- */
struct btrfs_workqueue * wq; /* 64 8 */
long unsigned int flags; /* 72 8 */
/* size: 80, cachelines: 2, members: 6 */
/* last cacheline: 16 bytes */
};
This in turn reduces size of other structures (on a release config):
- async_chunk 160 -> 152
- async_submit_bio 152 -> 144
- btrfs_async_delayed_work 104 -> 96
- btrfs_caching_control 176 -> 168
- btrfs_delalloc_work 144 -> 136
- btrfs_fs_info 3608 -> 3600
- btrfs_ordered_extent 440 -> 424
- btrfs_writepage_fixup 104 -> 96
Signed-off-by: David Sterba <dsterba@suse.com>
Add support for inserting stripe extents into the raid stripe tree on
completion of every write that needs an extra logical-to-physical
translation when using RAID.
Inserting the stripe extents happens after the data I/O has completed,
this is done to
a) support zone-append and
b) rule out the possibility of a RAID-write-hole.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When marking an extent buffer as dirty, at btrfs_mark_buffer_dirty(),
we check if its generation matches the running transaction and if not we
just print a warning. Such mismatch is an indicator that something really
went wrong and only printing a warning message (and stack trace) is not
enough to prevent a corruption. Allowing a transaction to commit with such
an extent buffer will trigger an error if we ever try to read it from disk
due to a generation mismatch with its parent generation.
So abort the current transaction with -EUCLEAN if we notice a generation
mismatch. For this we need to pass a transaction handle to
btrfs_mark_buffer_dirty() which is always available except in test code,
in which case we can pass NULL since it operates on dummy extent buffers
and all test roots have a single node/leaf (root node at level 0).
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Function name in the comment does not bring much value to code not
exposed as API and we don't stick to the kdoc format anymore. Update
formatting of parameter descriptions.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----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=0eEg
-----END PGP SIGNATURE-----
Merge tag 'for-6.6-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A few more followup fixes to the directory listing.
People have noticed different behaviour compared to other filesystems
after changes in 6.5. This is now unified to more "logical" and
expected behaviour while still within POSIX. And a few more fixes for
stable.
- change behaviour of readdir()/rewinddir() when new directory
entries are created after opendir(), properly tracking the last
entry
- fix race in readdir when multiple threads can set the last entry
index for a directory
Additionally:
- use exclusive lock when direct io might need to drop privs and call
notify_change()
- don't clear uptodate bit on page after an error, this may lead to a
deadlock in subpage mode
- fix waiting pattern when multiple readers block on Merkle tree
data, switch to folios"
* tag 'for-6.6-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix race between reading a directory and adding entries to it
btrfs: refresh dir last index during a rewinddir(3) call
btrfs: set last dir index to the current last index when opening dir
btrfs: don't clear uptodate on write errors
btrfs: file_remove_privs needs an exclusive lock in direct io write
btrfs: convert btrfs_read_merkle_tree_page() to use a folio
When opening a directory (opendir(3)) or rewinding it (rewinddir(3)), we
are not holding the directory's inode locked, and this can result in later
attempting to add two entries to the directory with the same index number,
resulting in a transaction abort, with -EEXIST (-17), when inserting the
second delayed dir index. This results in a trace like the following:
Sep 11 22:34:59 myhostname kernel: BTRFS error (device dm-3): err add delayed dir index item(name: cockroach-stderr.log) into the insertion tree of the delayed node(root id: 5, inode id: 4539217, errno: -17)
Sep 11 22:34:59 myhostname kernel: ------------[ cut here ]------------
Sep 11 22:34:59 myhostname kernel: kernel BUG at fs/btrfs/delayed-inode.c:1504!
Sep 11 22:34:59 myhostname kernel: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
Sep 11 22:34:59 myhostname kernel: CPU: 0 PID: 7159 Comm: cockroach Not tainted 6.4.15-200.fc38.x86_64 #1
Sep 11 22:34:59 myhostname kernel: Hardware name: ASUS ESC500 G3/P9D WS, BIOS 2402 06/27/2018
Sep 11 22:34:59 myhostname kernel: RIP: 0010:btrfs_insert_delayed_dir_index+0x1da/0x260
Sep 11 22:34:59 myhostname kernel: Code: eb dd 48 (...)
Sep 11 22:34:59 myhostname kernel: RSP: 0000:ffffa9980e0fbb28 EFLAGS: 00010282
Sep 11 22:34:59 myhostname kernel: RAX: 0000000000000000 RBX: ffff8b10b8f4a3c0 RCX: 0000000000000000
Sep 11 22:34:59 myhostname kernel: RDX: 0000000000000000 RSI: ffff8b177ec21540 RDI: ffff8b177ec21540
Sep 11 22:34:59 myhostname kernel: RBP: ffff8b110cf80888 R08: 0000000000000000 R09: ffffa9980e0fb938
Sep 11 22:34:59 myhostname kernel: R10: 0000000000000003 R11: ffffffff86146508 R12: 0000000000000014
Sep 11 22:34:59 myhostname kernel: R13: ffff8b1131ae5b40 R14: ffff8b10b8f4a418 R15: 00000000ffffffef
Sep 11 22:34:59 myhostname kernel: FS: 00007fb14a7fe6c0(0000) GS:ffff8b177ec00000(0000) knlGS:0000000000000000
Sep 11 22:34:59 myhostname kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
Sep 11 22:34:59 myhostname kernel: CR2: 000000c00143d000 CR3: 00000001b3b4e002 CR4: 00000000001706f0
Sep 11 22:34:59 myhostname kernel: Call Trace:
Sep 11 22:34:59 myhostname kernel: <TASK>
Sep 11 22:34:59 myhostname kernel: ? die+0x36/0x90
Sep 11 22:34:59 myhostname kernel: ? do_trap+0xda/0x100
Sep 11 22:34:59 myhostname kernel: ? btrfs_insert_delayed_dir_index+0x1da/0x260
Sep 11 22:34:59 myhostname kernel: ? do_error_trap+0x6a/0x90
Sep 11 22:34:59 myhostname kernel: ? btrfs_insert_delayed_dir_index+0x1da/0x260
Sep 11 22:34:59 myhostname kernel: ? exc_invalid_op+0x50/0x70
Sep 11 22:34:59 myhostname kernel: ? btrfs_insert_delayed_dir_index+0x1da/0x260
Sep 11 22:34:59 myhostname kernel: ? asm_exc_invalid_op+0x1a/0x20
Sep 11 22:34:59 myhostname kernel: ? btrfs_insert_delayed_dir_index+0x1da/0x260
Sep 11 22:34:59 myhostname kernel: ? btrfs_insert_delayed_dir_index+0x1da/0x260
Sep 11 22:34:59 myhostname kernel: btrfs_insert_dir_item+0x200/0x280
Sep 11 22:34:59 myhostname kernel: btrfs_add_link+0xab/0x4f0
Sep 11 22:34:59 myhostname kernel: ? ktime_get_real_ts64+0x47/0xe0
Sep 11 22:34:59 myhostname kernel: btrfs_create_new_inode+0x7cd/0xa80
Sep 11 22:34:59 myhostname kernel: btrfs_symlink+0x190/0x4d0
Sep 11 22:34:59 myhostname kernel: ? schedule+0x5e/0xd0
Sep 11 22:34:59 myhostname kernel: ? __d_lookup+0x7e/0xc0
Sep 11 22:34:59 myhostname kernel: vfs_symlink+0x148/0x1e0
Sep 11 22:34:59 myhostname kernel: do_symlinkat+0x130/0x140
Sep 11 22:34:59 myhostname kernel: __x64_sys_symlinkat+0x3d/0x50
Sep 11 22:34:59 myhostname kernel: do_syscall_64+0x5d/0x90
Sep 11 22:34:59 myhostname kernel: ? syscall_exit_to_user_mode+0x2b/0x40
Sep 11 22:34:59 myhostname kernel: ? do_syscall_64+0x6c/0x90
Sep 11 22:34:59 myhostname kernel: entry_SYSCALL_64_after_hwframe+0x72/0xdc
The race leading to the problem happens like this:
1) Directory inode X is loaded into memory, its ->index_cnt field is
initialized to (u64)-1 (at btrfs_alloc_inode());
2) Task A is adding a new file to directory X, holding its vfs inode lock,
and calls btrfs_set_inode_index() to get an index number for the entry.
Because the inode's index_cnt field is set to (u64)-1 it calls
btrfs_inode_delayed_dir_index_count() which fails because no dir index
entries were added yet to the delayed inode and then it calls
btrfs_set_inode_index_count(). This functions finds the last dir index
key and then sets index_cnt to that index value + 1. It found that the
last index key has an offset of 100. However before it assigns a value
of 101 to index_cnt...
3) Task B calls opendir(3), ending up at btrfs_opendir(), where the VFS
lock for inode X is not taken, so it calls btrfs_get_dir_last_index()
and sees index_cnt still with a value of (u64)-1. Because of that it
calls btrfs_inode_delayed_dir_index_count() which fails since no dir
index entries were added to the delayed inode yet, and then it also
calls btrfs_set_inode_index_count(). This also finds that the last
index key has an offset of 100, and before it assigns the value 101
to the index_cnt field of inode X...
4) Task A assigns a value of 101 to index_cnt. And then the code flow
goes to btrfs_set_inode_index() where it increments index_cnt from
101 to 102. Task A then creates a delayed dir index entry with a
sequence number of 101 and adds it to the delayed inode;
5) Task B assigns 101 to the index_cnt field of inode X;
6) At some later point when someone tries to add a new entry to the
directory, btrfs_set_inode_index() will return 101 again and shortly
after an attempt to add another delayed dir index key with index
number 101 will fail with -EEXIST resulting in a transaction abort.
Fix this by locking the inode at btrfs_get_dir_last_index(), which is only
only used when opening a directory or attempting to lseek on it.
Reported-by: ken <ken@bllue.org>
Link: https://lore.kernel.org/linux-btrfs/CAE6xmH+Lp=Q=E61bU+v9eWX8gYfLvu6jLYxjxjFpo3zHVPR0EQ@mail.gmail.com/
Reported-by: syzbot+d13490c82ad5353c779d@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-btrfs/00000000000036e1290603e097e0@google.com/
Fixes: 9b378f6ad4 ("btrfs: fix infinite directory reads")
CC: stable@vger.kernel.org # 6.5+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When opening a directory we find what's the index of its last entry and
then store it in the directory's file handle private data (struct
btrfs_file_private::last_index), so that in the case new directory entries
are added to a directory after an opendir(3) call we don't end up in an
infinite loop (see commit 9b378f6ad4 ("btrfs: fix infinite directory
reads")) when calling readdir(3).
However once rewinddir(3) is called, POSIX states [1] that any new
directory entries added after the previous opendir(3) call, must be
returned by subsequent calls to readdir(3):
"The rewinddir() function shall reset the position of the directory
stream to which dirp refers to the beginning of the directory.
It shall also cause the directory stream to refer to the current
state of the corresponding directory, as a call to opendir() would
have done."
We currently don't refresh the last_index field of the struct
btrfs_file_private associated to the directory, so after a rewinddir(3)
we are not returning any new entries added after the opendir(3) call.
Fix this by finding the current last index of the directory when llseek
is called against the directory.
This can be reproduced by the following C program provided by Ian Johnson:
#include <dirent.h>
#include <stdio.h>
int main(void) {
DIR *dir = opendir("test");
FILE *file;
file = fopen("test/1", "w");
fwrite("1", 1, 1, file);
fclose(file);
file = fopen("test/2", "w");
fwrite("2", 1, 1, file);
fclose(file);
rewinddir(dir);
struct dirent *entry;
while ((entry = readdir(dir))) {
printf("%s\n", entry->d_name);
}
closedir(dir);
return 0;
}
Reported-by: Ian Johnson <ian@ianjohnson.dev>
Link: https://lore.kernel.org/linux-btrfs/YR1P0S.NGASEG570GJ8@ianjohnson.dev/
Fixes: 9b378f6ad4 ("btrfs: fix infinite directory reads")
CC: stable@vger.kernel.org # 6.5+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When opening a directory for reading it, we set the last index where we
stop iteration to the value in struct btrfs_inode::index_cnt. That value
does not match the index of the most recently added directory entry but
it's instead the index number that will be assigned the next directory
entry.
This means that if after the call to opendir(3) new directory entries are
added, a readdir(3) call will return the first new directory entry. This
is fine because POSIX says the following [1]:
"If a file is removed from or added to the directory after the most
recent call to opendir() or rewinddir(), whether a subsequent call to
readdir() returns an entry for that file is unspecified."
For example for the test script from commit 9b378f6ad4 ("btrfs: fix
infinite directory reads"), where we have 2000 files in a directory, ext4
doesn't return any new directory entry after opendir(3), while xfs returns
the first 13 new directory entries added after the opendir(3) call.
If we move to a shorter example with an empty directory when opendir(3) is
called, and 2 files added to the directory after the opendir(3) call, then
readdir(3) on btrfs will return the first file, ext4 and xfs return the 2
files (but in a different order). A test program for this, reported by
Ian Johnson, is the following:
#include <dirent.h>
#include <stdio.h>
int main(void) {
DIR *dir = opendir("test");
FILE *file;
file = fopen("test/1", "w");
fwrite("1", 1, 1, file);
fclose(file);
file = fopen("test/2", "w");
fwrite("2", 1, 1, file);
fclose(file);
struct dirent *entry;
while ((entry = readdir(dir))) {
printf("%s\n", entry->d_name);
}
closedir(dir);
return 0;
}
To make this less odd, change the behaviour to never return new entries
that were added after the opendir(3) call. This is done by setting the
last_index field of the struct btrfs_file_private attached to the
directory's file handle with a value matching btrfs_inode::index_cnt
minus 1, since that value always matches the index of the next new
directory entry and not the index of the most recently added entry.
[1] https://pubs.opengroup.org/onlinepubs/007904875/functions/readdir_r.html
Link: https://lore.kernel.org/linux-btrfs/YR1P0S.NGASEG570GJ8@ianjohnson.dev/
CC: stable@vger.kernel.org # 6.5+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have been consistently seeing hangs with generic/648 in our subpage
GitHub CI setup. This is a classic deadlock, we are calling
btrfs_read_folio() on a folio, which requires holding the folio lock on
the folio, and then finding a ordered extent that overlaps that range
and calling btrfs_start_ordered_extent(), which then tries to write out
the dirty page, which requires taking the folio lock and then we
deadlock.
The hang happens because we're writing to range [1271750656, 1271767040),
page index [77621, 77622], and page 77621 is !Uptodate. It is also Dirty,
so we call btrfs_read_folio() for 77621 and which does
btrfs_lock_and_flush_ordered_range() for that range, and we find an ordered
extent which is [1271644160, 1271746560), page index [77615, 77621].
The page indexes overlap, but the actual bytes don't overlap. We're
holding the page lock for 77621, then call
btrfs_lock_and_flush_ordered_range() which tries to flush the dirty
page, and tries to lock 77621 again and then we deadlock.
The byte ranges do not overlap, but with subpage support if we clear
uptodate on any portion of the page we mark the entire thing as not
uptodate.
We have been clearing page uptodate on write errors, but no other file
system does this, and is in fact incorrect. This doesn't hurt us in the
!subpage case because we can't end up with overlapped ranges that don't
also overlap on the page.
Fix this by not clearing uptodate when we have a write error. The only
thing we should be doing in this case is setting the mapping error and
carrying on. This makes it so we would no longer call
btrfs_read_folio() on the page as it's uptodate and eliminates the
deadlock.
With this patch we're now able to make it through a full fstests run on
our subpage blocksize VMs.
Note for stable backports: this probably goes beyond 6.1 but the code
has been cleaned up and clearing the uptodate bit must be verified on
each version independently.
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE8rQSAMVO+zA4DBdWxWXV+ddtWDsFAmTskOwACgkQxWXV+ddt
WDsNJw/8CCi41Z7e3LdJsQd2iy3/+oJZUvIGuT5YvshYxTLCbV7AL+diBPnSQs4Q
/KFMGL7RZBgJzwVoSQtXnESXXgX8VOVfN1zY//k5g6z7BscCEQd73H/M0B8ciZy/
aBygm9tJ7EtWbGZWNR8yad8YtOgl6xoClrPnJK/DCLwMGPy2o+fnKP3Y9FOKY5KM
1Sl0Y4FlJ9dTJpxIwYbx4xmuyHrh2OivjU/KnS9SzQlHu0nl6zsIAE45eKem2/EG
1figY5aFBYPpPYfopbLDalEBR3bQGiViZVJuNEop3AimdcMOXw9jBF3EZYUb5Tgn
MleMDgmmjLGOE/txGhvTxKj9kci2aGX+fJn3jXbcIMksAA0OQFLPqzGvEQcrs6Ok
HA0RsmAkS5fWNDCuuo4ZPXEyUPvluTQizkwyoulOfnK+UPJCWaRqbEBMTsvm6M6X
wFT2czwLpaEU/W6loIZkISUhfbRqVoA3DfHy398QXNzRhSrg8fQJjma1f7mrHvTi
CzU+OD5YSC2nXktVOnklyTr0XT+7HF69cumlDbr8TS8u1qu8n1keU/7M3MBB4xZk
BZFJDz8pnsAqpwVA4T434E/w45MDnYlwBw5r+U8Xjyso8xlau+sYXKcim85vT2Q0
yx/L91P6tdekR1y97p4aDdxw/PgTzdkNGMnsTBMVzgtCj+5pMmE=
=N7Yn
-----END PGP SIGNATURE-----
Merge tag 'for-6.6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"No new features, the bulk of the changes are fixes, refactoring and
cleanups. The notable fix is the scrub performance restoration after
rewrite in 6.4, though still only partial.
Fixes:
- scrub performance drop due to rewrite in 6.4 partially restored:
- do IO grouping by blg_plug/blk_unplug again
- avoid unnecessary tree searches when processing stripes, in
extent and checksum trees
- the drop is noticeable on fast PCIe devices, -66% and restored
to -33% of the original
- backports to 6.4 planned
- handle more corner cases of transaction commit during orphan
cleanup or delayed ref processing
- use correct fsid/metadata_uuid when validating super block
- copy directory permissions and time when creating a stub subvolume
Core:
- debugging feature integrity checker deprecated, to be removed in
6.7
- in zoned mode, zones are activated just before the write, making
error handling easier, now the overcommit mechanism can be enabled
again which improves performance by avoiding more frequent flushing
- v0 extent handling completely removed, deprecated long time ago
- error handling improvements
- tests:
- extent buffer bitmap tests
- pinned extent splitting tests
- cleanups and refactoring:
- compression writeback
- extent buffer bitmap
- space flushing, ENOSPC handling"
* tag 'for-6.6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (110 commits)
btrfs: zoned: skip splitting and logical rewriting on pre-alloc write
btrfs: tests: test invalid splitting when skipping pinned drop extent_map
btrfs: tests: add a test for btrfs_add_extent_mapping
btrfs: tests: add extent_map tests for dropping with odd layouts
btrfs: scrub: move write back of repaired sectors to scrub_stripe_read_repair_worker()
btrfs: scrub: don't go ordered workqueue for dev-replace
btrfs: scrub: fix grouping of read IO
btrfs: scrub: avoid unnecessary csum tree search preparing stripes
btrfs: scrub: avoid unnecessary extent tree search preparing stripes
btrfs: copy dir permission and time when creating a stub subvolume
btrfs: remove pointless empty list check when reading delayed dir indexes
btrfs: drop redundant check to use fs_devices::metadata_uuid
btrfs: compare the correct fsid/metadata_uuid in btrfs_validate_super
btrfs: use the correct superblock to compare fsid in btrfs_validate_super
btrfs: simplify memcpy either of metadata_uuid or fsid
btrfs: add a helper to read the superblock metadata_uuid
btrfs: remove v0 extent handling
btrfs: output extra debug info if we failed to find an inline backref
btrfs: move the !zoned assert into run_delalloc_cow
btrfs: consolidate the error handling in run_delalloc_nocow
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZOXTKAAKCRCRxhvAZXjc
oifJAQCzi/p+AdQu8LA/0XvR7fTwaq64ZDCibU4BISuLGT2kEgEAuGbuoFZa0rs2
XYD/s4+gi64p9Z01MmXm2XO1pu3GPg0=
=eJz5
-----END PGP SIGNATURE-----
Merge tag 'v6.6-vfs.ctime' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs timestamp updates from Christian Brauner:
"This adds VFS support for multi-grain timestamps and converts tmpfs,
xfs, ext4, and btrfs to use them. This carries acks from all relevant
filesystems.
The VFS always uses coarse-grained timestamps when updating the ctime
and mtime after a change. This has the benefit of allowing filesystems
to optimize away a lot of metadata updates, down to around 1 per
jiffy, even when a file is under heavy writes.
Unfortunately, this has always been an issue when we're exporting via
NFSv3, which relies on timestamps to validate caches. A lot of changes
can happen in a jiffy, so timestamps aren't sufficient to help the
client decide to invalidate the cache.
Even with NFSv4, a lot of exported filesystems don't properly support
a change attribute and are subject to the same problems with timestamp
granularity. Other applications have similar issues with timestamps
(e.g., backup applications).
If we were to always use fine-grained timestamps, that would improve
the situation, but that becomes rather expensive, as the underlying
filesystem would have to log a lot more metadata updates.
This introduces fine-grained timestamps that are used when they are
actively queried.
This uses the 31st bit of the ctime tv_nsec field to indicate that
something has queried the inode for the mtime or ctime. When this flag
is set, on the next mtime or ctime update, the kernel will fetch a
fine-grained timestamp instead of the usual coarse-grained one.
As POSIX generally mandates that when the mtime changes, the ctime
must also change the kernel always stores normalized ctime values, so
only the first 30 bits of the tv_nsec field are ever used.
Filesytems can opt into this behavior by setting the FS_MGTIME flag in
the fstype. Filesystems that don't set this flag will continue to use
coarse-grained timestamps.
Various preparatory changes, fixes and cleanups are included:
- Fixup all relevant places where POSIX requires updating ctime
together with mtime. This is a wide-range of places and all
maintainers provided necessary Acks.
- Add new accessors for inode->i_ctime directly and change all
callers to rely on them. Plain accesses to inode->i_ctime are now
gone and it is accordingly rename to inode->__i_ctime and commented
as requiring accessors.
- Extend generic_fillattr() to pass in a request mask mirroring in a
sense the statx() uapi. This allows callers to pass in a request
mask to only get a subset of attributes filled in.
- Rework timestamp updates so it's possible to drop the @now
parameter the update_time() inode operation and associated helpers.
- Add inode_update_timestamps() and convert all filesystems to it
removing a bunch of open-coding"
* tag 'v6.6-vfs.ctime' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (107 commits)
btrfs: convert to multigrain timestamps
ext4: switch to multigrain timestamps
xfs: switch to multigrain timestamps
tmpfs: add support for multigrain timestamps
fs: add infrastructure for multigrain timestamps
fs: drop the timespec64 argument from update_time
xfs: have xfs_vn_update_time gets its own timestamp
fat: make fat_update_time get its own timestamp
fat: remove i_version handling from fat_update_time
ubifs: have ubifs_update_time use inode_update_timestamps
btrfs: have it use inode_update_timestamps
fs: drop the timespec64 arg from generic_update_time
fs: pass the request_mask to generic_fillattr
fs: remove silly warning from current_time
gfs2: fix timestamp handling on quota inodes
fs: rename i_ctime field to __i_ctime
selinux: convert to ctime accessor functions
security: convert to ctime accessor functions
apparmor: convert to ctime accessor functions
sunrpc: convert to ctime accessor functions
...
btrfs supports creating nested subvolumes however snapshots are not
recursive. When a snapshot is taken of a volume which contains a
subvolume the subvolume is replaced with a stub subvolume which has the
same name and uses inode number 2[1]. The stub subvolume kept the
directory name but did not set the time or permissions of the stub
subvolume. This resulted in all time information being the current time
and ownership defaulting to root. When subvolumes and snapshots are
created using unshare this results in a snapshot directory the user
created but has no permissions for.
Test case:
[vmuser@archvm ~]# sudo -i
[root@archvm ~]# mkdir -p /mnt/btrfs/test
[root@archvm ~]# chown vmuser:users /mnt/btrfs/test/
[root@archvm ~]# exit
logout
[vmuser@archvm ~]$ cd /mnt/btrfs/test
[vmuser@archvm test]$ unshare --user --keep-caps --map-auto --map-root-user
[root@archvm test]# btrfs subvolume create subvolume
Create subvolume './subvolume'
[root@archvm test]# btrfs subvolume create subvolume/subsubvolume
Create subvolume 'subvolume/subsubvolume'
[root@archvm test]# btrfs subvolume snapshot subvolume snapshot
Create a snapshot of 'subvolume' in './snapshot'
[root@archvm test]# exit
logout
[vmuser@archvm test]$ tree -ug
[vmuser users ] .
├── [vmuser users ] snapshot
│ └── [vmuser users ] subsubvolume <-- Without patch perm is root:root
└── [vmuser users ] subvolume
└── [vmuser users ] subsubvolume
5 directories, 0 files
[1] https://btrfs.readthedocs.io/en/latest/btrfs-subvolume.html#nested-subvolumes
Signed-off-by: Lee Trager <lee@trager.us>
Signed-off-by: David Sterba <dsterba@suse.com>
Having the assert in the actual helper documents the pre-conditions
much better than having it in the caller, so move it.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Share the calls to extent_clear_unlock_delalloc for btrfs_path allocation
failure handling and the normal exit path.
This relies on btrfs_free_path ignoring a NULL pointer, and the
initialization of cur_offset to start at the beginning of the function.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Use the block group pointer used to track the outstanding NOCOW writes as
a boolean to remove the duplicate nocow variable, and keep it contained
in the main loop to simplify the logic.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
When run_delalloc_nocow has cow_start set to a value other than (u64)-1,
it has delayed COW writeback pending behind cur_offset. When an error
occurs in such a window, the range going back to cow_start and not just
cur_offset needs to be unlocked, but only two error cases handle this
correctly Move the code to handle unlock the COW range to the common
error handling label and document the logic.
To make things even more complicated, cow_file_range as called by
fallback_to_cow will unlock the range it is operating on when it fails as
well, so we need to reset cow_start right after caling fallback_to_cow
instead of only when it succeeded.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
Use LIST_HEAD() to initialize the list_head instead of open-coding it.
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
During mount we will call btrfs_orphan_cleanup() to remove any inodes that
were previously deleted (have a link count of 0) but for which we were not
able before to remove their items from the subvolume tree. The removal of
the items will happen by triggering eviction, when we do the final iput()
on them at btrfs_orphan_cleanup(), which will end in the loop at
btrfs_evict_inode() that truncates inode items.
In a dire situation we may have a transaction abort due to -ENOSPC when
attempting to truncate the inode items, and in that case the orphan item
(key type BTRFS_ORPHAN_ITEM_KEY) will remain in the subvolume tree and
when we hit the next iteration of the while loop at btrfs_orphan_cleanup()
we will find the same orphan item as before, and then we will return
-EINVAL from btrfs_orphan_cleanup() through the following if statement:
if (found_key.offset == last_objectid) {
btrfs_err(fs_info,
"Error removing orphan entry, stopping orphan cleanup");
ret = -EINVAL;
goto out;
}
This makes the mount operation fail with -EINVAL, when it should have been
-ENOSPC. This is confusing because -EINVAL might lead a user into thinking
it provided invalid mount options for example.
An example where this happens:
$ mount test.img /mnt
mount: /mnt: wrong fs type, bad option, bad superblock on /dev/loop0, missing codepage or helper program, or other error.
$ dmesg
[ 2542.356934] BTRFS: device fsid 977fff75-1181-4d2b-a739-384fa710d16e devid 1 transid 47409973 /dev/loop0 scanned by mount (4459)
[ 2542.357451] BTRFS info (device loop0): using crc32c (crc32c-intel) checksum algorithm
[ 2542.357461] BTRFS info (device loop0): disk space caching is enabled
[ 2542.742287] BTRFS info (device loop0): auto enabling async discard
[ 2542.764554] BTRFS info (device loop0): checking UUID tree
[ 2551.743065] ------------[ cut here ]------------
[ 2551.743068] BTRFS: Transaction aborted (error -28)
[ 2551.743149] WARNING: CPU: 7 PID: 215 at fs/btrfs/block-group.c:3494 btrfs_write_dirty_block_groups+0x397/0x3d0 [btrfs]
[ 2551.743311] Modules linked in: btrfs blake2b_generic (...)
[ 2551.743353] CPU: 7 PID: 215 Comm: kworker/u24:5 Not tainted 6.4.0-rc6-btrfs-next-134+ #1
[ 2551.743356] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014
[ 2551.743357] Workqueue: events_unbound btrfs_async_reclaim_metadata_space [btrfs]
[ 2551.743405] RIP: 0010:btrfs_write_dirty_block_groups+0x397/0x3d0 [btrfs]
[ 2551.743449] Code: 8b 43 0c (...)
[ 2551.743451] RSP: 0018:ffff982c005a7c40 EFLAGS: 00010286
[ 2551.743452] RAX: 0000000000000000 RBX: ffff88fc6e44b400 RCX: 0000000000000000
[ 2551.743453] RDX: 0000000000000002 RSI: ffffffff8dff0878 RDI: 00000000ffffffff
[ 2551.743454] RBP: ffff88fc51817208 R08: 0000000000000000 R09: ffff982c005a7ae0
[ 2551.743455] R10: 0000000000000001 R11: 0000000000000001 R12: ffff88fc43d2e570
[ 2551.743456] R13: ffff88fc43d2e400 R14: ffff88fc8fb08ee0 R15: ffff88fc6e44b530
[ 2551.743457] FS: 0000000000000000(0000) GS:ffff89035fbc0000(0000) knlGS:0000000000000000
[ 2551.743458] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 2551.743459] CR2: 00007fa8cdf2f6f4 CR3: 0000000124850003 CR4: 0000000000370ee0
[ 2551.743462] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 2551.743463] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 2551.743464] Call Trace:
[ 2551.743472] <TASK>
[ 2551.743474] ? __warn+0x80/0x130
[ 2551.743478] ? btrfs_write_dirty_block_groups+0x397/0x3d0 [btrfs]
[ 2551.743520] ? report_bug+0x1f4/0x200
[ 2551.743523] ? handle_bug+0x42/0x70
[ 2551.743526] ? exc_invalid_op+0x14/0x70
[ 2551.743528] ? asm_exc_invalid_op+0x16/0x20
[ 2551.743532] ? btrfs_write_dirty_block_groups+0x397/0x3d0 [btrfs]
[ 2551.743574] ? _raw_spin_unlock+0x15/0x30
[ 2551.743576] ? btrfs_run_delayed_refs+0x1bd/0x200 [btrfs]
[ 2551.743609] commit_cowonly_roots+0x1e9/0x260 [btrfs]
[ 2551.743652] btrfs_commit_transaction+0x42e/0xfa0 [btrfs]
[ 2551.743693] ? __pfx_autoremove_wake_function+0x10/0x10
[ 2551.743697] flush_space+0xf1/0x5d0 [btrfs]
[ 2551.743743] ? _raw_spin_unlock+0x15/0x30
[ 2551.743745] ? finish_task_switch+0x91/0x2a0
[ 2551.743748] ? _raw_spin_unlock+0x15/0x30
[ 2551.743750] ? btrfs_get_alloc_profile+0xc9/0x1f0 [btrfs]
[ 2551.743793] btrfs_async_reclaim_metadata_space+0xe1/0x230 [btrfs]
[ 2551.743837] process_one_work+0x1d9/0x3e0
[ 2551.743844] worker_thread+0x4a/0x3b0
[ 2551.743847] ? __pfx_worker_thread+0x10/0x10
[ 2551.743849] kthread+0xee/0x120
[ 2551.743852] ? __pfx_kthread+0x10/0x10
[ 2551.743854] ret_from_fork+0x29/0x50
[ 2551.743860] </TASK>
[ 2551.743861] ---[ end trace 0000000000000000 ]---
[ 2551.743863] BTRFS info (device loop0: state A): dumping space info:
[ 2551.743866] BTRFS info (device loop0: state A): space_info DATA has 126976 free, is full
[ 2551.743868] BTRFS info (device loop0: state A): space_info total=13458472960, used=13458137088, pinned=143360, reserved=0, may_use=0, readonly=65536 zone_unusable=0
[ 2551.743870] BTRFS info (device loop0: state A): space_info METADATA has -51625984 free, is full
[ 2551.743872] BTRFS info (device loop0: state A): space_info total=771751936, used=770146304, pinned=1605632, reserved=0, may_use=51625984, readonly=0 zone_unusable=0
[ 2551.743874] BTRFS info (device loop0: state A): space_info SYSTEM has 14663680 free, is not full
[ 2551.743875] BTRFS info (device loop0: state A): space_info total=14680064, used=16384, pinned=0, reserved=0, may_use=0, readonly=0 zone_unusable=0
[ 2551.743877] BTRFS info (device loop0: state A): global_block_rsv: size 53231616 reserved 51544064
[ 2551.743878] BTRFS info (device loop0: state A): trans_block_rsv: size 0 reserved 0
[ 2551.743879] BTRFS info (device loop0: state A): chunk_block_rsv: size 0 reserved 0
[ 2551.743880] BTRFS info (device loop0: state A): delayed_block_rsv: size 0 reserved 0
[ 2551.743881] BTRFS info (device loop0: state A): delayed_refs_rsv: size 786432 reserved 0
[ 2551.743886] BTRFS: error (device loop0: state A) in btrfs_write_dirty_block_groups:3494: errno=-28 No space left
[ 2551.743911] BTRFS info (device loop0: state EA): forced readonly
[ 2551.743951] BTRFS warning (device loop0: state EA): could not allocate space for delete; will truncate on mount
[ 2551.743962] BTRFS error (device loop0: state EA): Error removing orphan entry, stopping orphan cleanup
[ 2551.743973] BTRFS warning (device loop0: state EA): Skipping commit of aborted transaction.
[ 2551.743989] BTRFS error (device loop0: state EA): could not do orphan cleanup -22
So make the btrfs_orphan_cleanup() return the value of BTRFS_FS_ERROR(),
if it's set, and -EINVAL otherwise.
For that same example, after this change, the mount operation fails with
-ENOSPC:
$ mount test.img /mnt
mount: /mnt: mount(2) system call failed: No space left on device.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For zoned file systems we need to use run_delalloc_zoned to submit
writeback, as we need to write out partial allocations when running into
zone active limits.
submit_uncompressed_range currently always calls cow_file_range to
allocate blocks and thus misses the active zone limits handling. Fix
this by passing the pages_dirty argument to run_delalloc_zoned and always
using it from submit_uncompressed_range as it does the right thing for
zoned and non-zoned file systems.
To account for the fact that run_delalloc_zoned is now also used for
non-zoned file systems rename it to run_delalloc_cow, and add comment
describing it.
Fixes: 42c0110009 ("btrfs: zoned: introduce dedicated data write path for zoned filesystems")
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
extent_write_locked_range currently expects that either all or no
pages are dirty when it is called. Bur run_delalloc_zoned is called
directly in the writepages path, and has the dirty bit cleared only
for locked_page and which the extent_write_cache_pages currently
operates. It currently works around this by redirtying locked_page,
but that is a bit inefficient and cumbersome. Pass a locked_page
argument to run_delalloc_zoned so that clearing the dirty bit can
be skipped on just that page.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Handling of the done_offset to cow_file_range is a bit confusing, as
it is not updated at all when the function succeeds, and the -EAGAIN
status is used bother for the case where we need to wait for a zone
finish and the one where the allocation was partially successful.
Change the calling convention so that done_offset is always updated,
and 0 is returned if some allocation was successful (partial allocation
can still only happen for zoned devices), and waiting for a zone
finish is done internally in cow_file_range instead of the caller.
Also write a comment explaining the logic.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
compress_file_range needs to clear the dirty bit before handing off work
to the compression worker threads to prevent processes coming in through
mmap and changing the file contents while the compression is accessing
the data (See commit 4adaa61102 ("Btrfs: fix race between mmap writes
and compression").
But when compress_file_range decides to not compress the data, it falls
back to submit_uncompressed_range which uses extent_write_locked_range
to write the uncompressed data. extent_write_locked_range currently
expects all pages to be marked dirty so that it can clear the dirty
bit itself, and thus compress_file_range has to redirty the page range.
Redirtying the page range is rather inefficient and also pointless,
so instead pass a pages_dirty parameter to extent_write_locked_range
and skip the redirty game entirely.
Note that compress_file_range was even redirtying the locked_page twice
given that extent_range_clear_dirty_for_io already redirties all pages
in the range, which must include locked_page if there is one.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
