We can use SND_SOC_DAILINK_REG() with 2 parameter.
DUMMY Platform is not needed.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://msgid.link/r/875y0u93rq.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use preferred device_get_match_data() instead of of_match_device() to
get the driver match data. With this, adjust the includes to explicitly
include the correct headers.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231006-dt-asoc-header-cleanups-v3-5-13a4f0f7fee6@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it was merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev> # for at91
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231006-dt-asoc-header-cleanups-v3-1-13a4f0f7fee6@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC is now unified asoc_xxx() into snd_soc_xxx().
This patch convert asoc_xxx() to snd_soc_xxx().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87fs3kqnhi.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
"samsung,audio-widgets" and "samsung,audio-routing" are not boolean
properties, thus more appropriate is to use of_property_present() to
check if they are present.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230810063300.20151-7-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
'Headphone Switch' control is already registered from
sound/soc/codecs/wm_hubs.c:479, so duplicating it in midas_wm1811
causes following probe failure:
midas-audio sound: control 2:0:0:Headphone Switch:0 is already present
midas-audio sound: ASoC: Failed to add Headphone Switch: -16
midas-audio sound: Failed to register card: -16
midas-audio: probe of sound failed with error -16
Fix this by dropping duplicated control.
Fixes: d27224a45e ("ASoC: samsung: midas_wm1811: Map missing jack kcontrols")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20230809100446.2105825-1-m.szyprowski@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver does not map jack pins to kcontrols that PulseAudio/PipeWire
need to handle jack detection events. The WM1811 codec used here seems
to support detecting Headphone and Headset Mic connections. Expose each
to userspace as a kcontrol and add the necessary widgets.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230802175737.263412-28-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver has correctly mapped jack kcontrols for Headphone and
Headset Mic. However, it is also mapping Line Out jack detection events
to the Headphone kcontrol.
The WM5100 codec used here can distinguish Line Out connections from
Headphone connections. Decouple the two, expose Line Out to userspace as
an independent kcontrol and add the necessary widget.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230802175737.263412-27-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver does not properly map jack pins to kcontrols that PulseAudio
and PipeWire need to handle jack detection events. The WM8958 codec used
here can detect Headphone and Headset Mic connections. Expose each to
userspace as a kcontrol and add the necessary widgets.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230802175737.263412-26-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current ASoC has snd_soc_{of_}get_dai_name() to get DAI name
for dlc (snd_soc_dai_link_component).
But we now can use snd_soc_{of_}get_dlc() for it. Let's use it.
- note: need deep check
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87jzvydgms.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC is now using c2c_params instead of params. This patch replace it.
num_c2c_params (was num_params) was not mandatory before,
but let's set it by this patch.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87jzytc2kp.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20230315150745.67084-130-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20230315150745.67084-129-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20230315150745.67084-128-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20230315150745.67084-127-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20230315150745.67084-126-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20230315150745.67084-125-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties. As
part of this, convert of_get_property/of_find_property calls to the
recently added of_property_present() helper when we just want to test
for presence of a property and nothing more.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230310144732.1546328-1-robh@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The majority of works in this cycle are about ASoC spread over trees.
Most of them are for new devices and cleanups / refactoring works,
and not much significant changes are seen in the core side.
Below are some highlights:
ASoC:
- Continued refactoring to move into common helper functions
- Lots of DT schema conversons and stylistic nits
- Continued work on building out the new SOF IPC4 scheme
- Continued work for Intel AVS
- New drivers for Awinc AT88395, Infineon PEB2466, Iron Device
SMA1303, Mediatek MT8188, Realtek RT712, Renesas IDT821034,
Samsung/Tesla FSD SoC I2S, and TI TAS5720A-Q1
ALSA:
- A few cleanups to make the remove callbacks to void returns
- FireWire refactoring and enhancements
- PCM kselftest enhancements
-----BEGIN PGP SIGNATURE-----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=9s9c
-----END PGP SIGNATURE-----
Merge tag 'sound-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"The majority of works in this cycle are about ASoC spread over trees.
Most of them are for new devices and cleanups / refactoring works, and
not much significant changes are seen in the core side.
Below are some highlights:
ASoC:
- Continued refactoring to move into common helper functions
- Lots of DT schema conversons and stylistic nits
- Continued work on building out the new SOF IPC4 scheme
- Continued work for Intel AVS
- New drivers for Awinc AT88395, Infineon PEB2466, Iron Device
SMA1303, Mediatek MT8188, Realtek RT712, Renesas IDT821034,
Samsung/Tesla FSD SoC I2S, and TI TAS5720A-Q1
ALSA:
- A few cleanups to make the remove callbacks to void returns
- FireWire refactoring and enhancements
- PCM kselftest enhancements"
* tag 'sound-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (398 commits)
ALSA: hda/hdmi: Register with vga_switcheroo on Dual GPU Macbooks
ASoC: soc-ac97: Return correct error codes
ASoC: soc-dapm.h: fixup warning struct snd_pcm_substream not declared
ASoC: cs35l45: Remove separate namespace for tables
ASoC: cs35l45: Remove separate tables module
ASoC: soc-ac97: Convert to agnostic GPIO API
ASoC: dt-bindings: renesas,rsnd.yaml: drop "dmas/dma-names" from "rcar_sound,ssi"
ALSA: hda: cs35l41: Enable Amp High Pass Filter
ALSA: hda: cs35l41: Ensure firmware/tuning pairs are always loaded
ALSA: hda: cs35l41: Correct error condition handling
ASoC: codecs: wcd934x: Use min macro for comparison and assignment
ASoC: Intel: Skylake: Fix struct definition
ASoC: tlv320adcx140: extend list of supported samplerates
ASoC: imx-pcm-rpmsg: Remove unused variable
SoC: rt5682s: Disable jack detection interrupt during suspend
ASoC: SOF: Intel: hda-dsp: Set streaming flag for d0i3
ASoC: SOF: Intel: Enable d0i3 work for ipc4
ASoC: SOF: ipc4: Wake up dsp core before sending ipc msg
ASoC: SOF: Intel: hda-dsp: use set_pm_gate according to ipc version
ASoC: SOF: Introduce a new set_pm_gate() IPC PM op
...
Add support for enabling I2S controller on FSD platform.
FSD I2S controller is based on Exynos7 I2S controller, supporting
2CH playback/capture in I2S mode and 7.1CH playback/capture in TDM
mode.
Signed-off-by: Padmanabhan Rajanbabu <p.rajanbabu@samsung.com>
Link: https://lore.kernel.org/r/20230116103823.90757-3-p.rajanbabu@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The s3c24xx SoC platform was completely removed, as were most of the
s3c64xx based board files, leaving only the DT based machines as well
as the MACH_WLF_CRAGG_6410 machine. All other board specific ASoC
driver can can now be recycled.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Current rtd has both dai_link pointer (A) and num_cpus/codecs (B).
(A) rtd->dai_link = dai_link;
(B) rtd->num_cpus = dai_link->num_cpus;
(B) rtd->num_codecs = dai_link->num_codecs;
But, we can get num_cpus/codecs (B) via dai_link (A).
This means we don't need to keep num_cpus/codecs on rtd.
This patch removes these.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87sfkmv9n3.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
struct iio_chan_spec is meant to be opaque to IIO consumer drivers
which should only use the interfaces in linux/iio/consumer.h.
Use the provided accessor function to find get the type of the
channel instead of directly reading it form the structure.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Link: https://lore.kernel.org/r/20220821160914.2207116-1-jic23@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
sparse reports
sound/soc/samsung/neo1973_wm8753.c:347:24: warning: symbol 'neo1973_audio' was not declared. Should it be static?
neo1973_audio is only used in neo1973_wm8753.c, so it's
storage class specifier should be static.
Fixes: e26a2abcc2 ("ASoC: samsung: neo1973: turn into platform driver")
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220629201811.2537853-1-trix@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sparse reports
sound/soc/samsung/rx1950_uda1380.c:131:18: warning: symbol 'gpiod_speaker_power' was not declared. Should it be static?
sound/soc/samsung/rx1950_uda1380.c:231:24: warning: symbol 'rx1950_audio' was not declared. Should it be static?
Both gpiod_speaker_power and rx1950_audio are only used in rx1950_uda1380.c,
so their storage class specifiers should be static.
Fixes: 83d74e3542 ("ASoC: samsung: rx1950: turn into platform driver")
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220629185345.910406-1-trix@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:
Historically, the legacy DAI naming scheme was applied to platform
drivers and the newer scheme to CODEC drivers. During componentisation
the core lost the knowledge of if a driver was a CODEC or platform, they
were all now components. To continue to support the legacy naming on
older platform drivers a flag was added to the snd_soc_component_driver
structure, non_legacy_dai_naming, to indicate to use the new scheme and
this was applied to all CODECs as part of the migration.
However, a slight issue appears to be developing with respect to this
flag being opt in for the non-legacy scheme, which presumably we want to
be the primary scheme used. Many codec drivers appear to forget to
include this flag:
grep -l -r "snd_soc_component_driver" sound/soc/codecs/*.c |
xargs grep -L "non_legacy_dai_naming" | wc
48 48 556
Whilst in many cases the configuration of the DAIs themselves will cause
the core to apply the new scheme anyway, it would seem more sensible to
change the flag to legacy_dai_naming making the new scheme opt out. This
patch series migrates across to such a scheme.
There is no particular need to restrict building of S3C I2S driver to
supported platforms within the C unit, because Kconfig does it.
Removing such restricting #ifdef from s3c-i2s-v2 allows compile testing
it on other platforms.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220627143412.477226-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The conversion of the set_fmt callback to direct clock specification
included a small typo, correct the affected code.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220627094335.3051210-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-40-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Change the legacy DAI naming flag from opting in to the new scheme
(non_legacy_dai_naming), to opting out of it (legacy_dai_naming).
These drivers appear to be on the CPU side of the DAI link and
currently uses the legacy naming, so add the new flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-34-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:
Currently the set_fmt callback always passes clock provider/consumer
with respect to the CODEC. This made sense when the framework was
directly broken down into platforms and CODECs. However, as things
are now broken down into components which can be connected as either
the CPU or CODEC side of a DAI link it simplifies things if each
side of the link is just told if it is provider or consumer of the
clocks. Making this change allows us to remove one of the last parts
of the ASoC core that needs to know if a driver is a CODEC driver,
where it flips the clock format specifier if a CODEC driver is used on
the CPU side of a DAI link, as well as just being conceptually more
consistent with componentisation.
The basic idea of this patch chain is to change the set_fmt callback
from specifying if the CODEC is provider/consumer into directly
specifying if the component is provider/consumer. To do this we add
some new defines, and then to preserve bisectability, the migration is
done by adding a new callback, converting over all existing CPU side
drivers, converting the core, and then finally reverting back to the
old callback.
Converting the platform drivers makes sense as the existing defines
are from the perspective of the CODEC and there are more CODEC drivers
than platform drivers.
Obviously a fair amount of this patch chain I was only able to build
test, so any testing that can be done would be greatly appreciated.
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
This can probably wait for the next merge window, I found a number of
cppcheck warnings that I didn't see in my last checks. The irony is
that the only really important issue found by cppcheck was on one of
my previous DPCM changes (submitted separately as a fix).
of_get_child_by_name() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
This function is missing of_node_put(cpu) in the error path.
Fix this by goto out label. of_node_put() will check NULL pointer.
Fixes: 7a3a7671fa ("ASoC: samsung: Add driver for Aries boards")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220603130640.37624-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/samsung/snow.c:219:9: warning: Identical condition and
return expression 'ret', return value is always 0
[identicalConditionAfterEarlyExit]
return ret;
^
sound/soc/samsung/snow.c:215:6: note: If condition 'ret' is true, the
function will return/exit
if (ret)
^
sound/soc/samsung/snow.c:219:9: note: Returning identical expression
'ret'
return ret;
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220520211719.607543-16-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now the core has been migrated across to the new direct clock
specification we can move the drivers back to the normal set_fmt
callback.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220519154318.2153729-47-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of updating the core to directly tell drivers if they are clock
provider or consumer update these CPU side drivers to use the new direct
callback.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220519154318.2153729-20-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
of_parse_phandle() returns a node pointer with refcount
incremented, we should use of_node_put() on it when done.
If extcon_find_edev_by_node() fails, it doesn't call of_node_put()
Calling of_node_put() after extcon_find_edev_by_node() to fix this.
Fixes: 7a3a7671fa ("ASoC: samsung: Add driver for Aries boards")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220512043828.496-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_card_jack_new() allowed to create jack kcontrol without pins,
but did not create kcontrols. The jack would not have kcontrols if pins
were not going to be added.
This renames the old snd_soc_card_jack_new() to
snd_soc_card_jack_new_pins() for use when pins are provided or will be
added later. The new snd_soc_card_jack_new() appropriately creates a
jack for use without pins and adds a kcontrol.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Link: https://lore.kernel.org/r/20220408041114.6024-1-akihiko.odaki@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
These structs only have their address assigned to the
dapm_{routes,widget} fields in the snd_soc_card struct,
both which are pointers to const data. Make them const to
allow the compiler to put them in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220330204227.25081-1-rikard.falkeborn@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
kstrdup() is a memory allocation function which can return NULL when
some internal memory errors happen. It is better to check the return
value of it to catch the error in time.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com>
Link: https://lore.kernel.org/r/tencent_EC21778DC383823CBC4069EA9F0B84943905@qq.com
Signed-off-by: Mark Brown <broonie@kernel.org>
