Enable build support for Baytrail SST DSP platform and byt-rt5640 machine
drivers.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Add Baytrail SST descriptor with the byt-rt5640 machine driver to sst-acpi
loader.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Add machine driver for Baytrail SST DSP platform with RT5640 audio codec.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
This adds the Baytrail SST DSP PCM platform driver. It registers itself with
the ALSA SoC layer and uses Intel Baytrail SST DSP IPC for DSP control.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Add support for Baytrail SST DSP IPC. This provides mechanism to communicate
with the DSP firmware.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
This adds basic functionality for Baytrail SST DSP initialization and
firmware loading.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
While the SHIM register addresses in Baytrail are the same than Haswell and
Broadwell their register size is 64-bit and some bits are different.
This patch adds the SST device ID for Baytrail and Baytrail specific
SHIM bit definitions.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Add support for Haswell based machines with SST DSP audio.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Build the Haswell/Broadwell PCM, IPC and DSP drivers.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Add the Haswell and Broadwell PCM DSP platform driver. This driver uses
the IPC driver for communication with the SST DSP.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Add support for Haswell and Broadwell DSP IPC. This is used by the DSP
platform PCM driver to configure the DSP for audio operations.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Add support for low level differentiation functions for Haswell and Broadwell
SST DSPs. This includes suppoprt for DSP boot and reset, DSP firmware module
parsing and DSP memory block map initialisation.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
The pin updates in this driver look like they are intended to be done
atomically, update to do so.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Disable build on non X86 architectures except for compile testing. This fixes
the following build errors on PPC and adds an option for testing the build on other
architectures as suggested by Mark Brown :-
sound/soc/intel/sst-dsp.c: In function 'sst_dsp_outbox_write':
sound/soc/intel/sst-dsp.c:218:2: error: implicit declaration of function 'memcpy_toio' [-Werror=implicit-function-declaration]
memcpy_toio(sst->mailbox.out_base, message, bytes);
^
sound/soc/intel/sst-dsp.c: In function 'sst_dsp_outbox_read':
sound/soc/intel/sst-dsp.c:231:2: error: implicit declaration of function 'memcpy_fromio' [-Werror=implicit-function-declaration]
memcpy_fromio(message, sst->mailbox.out_base, bytes);
^
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Initial implementation of this driver focused only matching SST ACPI ID
with single machine driver and same firmware file per platform. It was known
restriction to be improved incrementally.
This patch is now changing this that SST ACPI ID refers purely to platform
specific data which refers to machine drivers on this platform, not vice
versa.
Matching machine driver is found by looking at ACPI ID which would best
match with the driver. Typically this would be the ACPI ID of audio codec
but is not tied to it.
This patch also changes that DSP firmware name is machine not platform
specific.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
We originally thought to request SST audio DSP firmware during the SST
platform driver initialization. However plain request_firmware doesn't
work in driver probe paths if userspace is not ready to handle it. For
instance when drivers are built-in.
Implementing asynchronous firmware request in SST platform driver
initialization complicates code needlessly since it anyway will fail if
firmware is missing.
This is more simple to handle by requesting firmware asynchronously in
sst_acpi_probe() and register SST platform only after firmware is loaded.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Move fw_base and fw_size fields in struct sst_pdata under ACPI data for
clarifying that these are not related to firmware file but for platform
specific extended firmware area reserved by the BIOS.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
The Intel audio DSP SST trace event header has been renamed from sst.h
to intel-sst.h in order to avoid any confusion with any future
Samoa Standard Time drivers ;)
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Add GFP_KERNEL when allocating firmware DMA buffer.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
This adds kernel build support for Intel SST core audio.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Provide services for Intel SST drivers to load SST modular firmware.
SST Firmware can be made up of several modules. These modules can exist
within any of the compatible SST memory blocks. Provide a generic memory
block and firmware module manager that can be used with any SST firmware
and core.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Most of the SST devices will be exposed as ACPI devices. It makes sense to
avoid duplication of the driver enumeration logic and concentrate the functionality
into a single ACPI SST enumeration file.
Idea of this loader is to parse data we get from ACPI and to be able to load
needed other SST drivers and ASoC machine driver runtime based on single
ACPI ID what BIOS gives to us.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Add support for Intel Smart Sound Technology (SST) audio DSPs.
This driver provides the low level IO, reset, boot and IRQ management
for Intel audio DSPs. These files make up the low level part of the SST
audio driver stack and will be used by many Intel SST cores like
Haswell, Broadwell and Baytrail.
SST DSPs expose a memory mapped region (shim) for config and control.
The shim layout is mostly shared without much modification across cores
and this driver provides a uniform API to access the shim and to enable
basic shim functions. It also provides functionality to abstract some shim
functions for cores with different shim features.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Resent with correct email for Mark.
In order to differentiate the different Intel SST audio core drivers we
need to rename the current drivers with a mfld prefix. This also includes
renaming in the Makefile and Kconfig
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
The ASoC core assumes that the PCM component of the ASoC card transparently
moves data around and does not impose any restrictions on the memory layout or
the transfer speed. It ignores all fields from the snd_pcm_hardware struct for
the PCM driver that are related to this. Setting these fields in the PCM driver
might suggest otherwise though, so rather not set them.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
We have other Intel platforms coming having the Smart Sound Technology (SST)
so rename the mid-x86 directory to intel as originally directory name
reflected only Intel MID platform.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
