Fix the following warnings:
drivers/scsi/mpt3sas/mpt3sas_base.c:5430: warning: Excess function parameter 'ct' description in '_base_allocate_pcie_sgl_pool'
drivers/scsi/mpt3sas/mpt3sas_base.c:5493: warning: Excess function parameter 'ctr' description in '_base_allocate_chain_dma_pool'
Link: https://lore.kernel.org/r/20210415220826.29438-10-bvanassche@acm.org
Fixes: d6adc251dd ("scsi: mpt3sas: Force PCIe scatterlist allocations to be within same 4 GB region")
Fixes: 7dd847dae1 ("scsi: mpt3sas: Force chain buffer allocations to be within same 4 GB region")
Cc: Sathya Prakash <sathya.prakash@broadcom.com>
Cc: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix the following out-of-bounds warnings by embedding existing struct
htb_rel_query into struct mpt3_addnl_diag_query, instead of duplicating its
members:
include/linux/fortify-string.h:20:29: warning: '__builtin_memcpy' offset [19, 32] from the object at 'karg' is out of the bounds of referenced subobject 'buffer_rel_condition' with type 'short unsigned int' at offset 16 [-Warray-bounds]
include/linux/fortify-string.h:22:29: warning: '__builtin_memset' offset [19, 32] from the object at 'karg' is out of the bounds of referenced subobject 'buffer_rel_condition' with type 'short unsigned int' at offset 16 [-Warray-bounds]
The problem is that the original code is trying to copy data into a bunch
of struct members adjacent to each other in a single call to memcpy(). All
those members are exactly the same contained in struct htb_rel_query, so
instead of duplicating them into struct mpt3_addnl_diag_query, replace them
with new member rel_query of type struct htb_rel_query. So, now that this
new object is introduced, memcpy() doesn't overrun the length of
&karg.buffer_rel_condition, because the address of the new struct object
_rel_query_ is used as destination, instead. The same issue is present when
calling memset(), and it is fixed with this same approach.
Below is a comparison of struct mpt3_addnl_diag_query, before and after
this change (the size and cachelines remain the same):
$ pahole -C mpt3_addnl_diag_query drivers/scsi/mpt3sas/mpt3sas_ctl.o
struct mpt3_addnl_diag_query {
struct mpt3_ioctl_header hdr; /* 0 12 */
uint32_t unique_id; /* 12 4 */
uint16_t buffer_rel_condition; /* 16 2 */
uint16_t reserved1; /* 18 2 */
uint32_t trigger_type; /* 20 4 */
uint32_t trigger_info_dwords[2]; /* 24 8 */
uint32_t reserved2[2]; /* 32 8 */
/* size: 40, cachelines: 1, members: 7 */
/* last cacheline: 40 bytes */
};
$ pahole -C mpt3_addnl_diag_query drivers/scsi/mpt3sas/mpt3sas_ctl.o
struct mpt3_addnl_diag_query {
struct mpt3_ioctl_header hdr; /* 0 12 */
uint32_t unique_id; /* 12 4 */
struct htb_rel_query rel_query; /* 16 16 */
uint32_t reserved2[2]; /* 32 8 */
/* size: 40, cachelines: 1, members: 4 */
/* last cacheline: 40 bytes */
};
Also, this helps with the ongoing efforts to globally enable -Warray-bounds
and get us closer to being able to tighten the FORTIFY_SOURCE routines on
memcpy().
Link: https://github.com/KSPP/linux/issues/109
Link: https://lore.kernel.org/lkml/60659889.bJJILx2THu3hlpxW%25lkp@intel.com/
Link: https://lore.kernel.org/r/20210401162054.GA397186@embeddedor
Build-tested-by: kernel test robot <lkp@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
While diag reset is in progress there is short duration where all access to
controller's PCI config space from the host needs to be blocked. This is
due to a hardware limitation of the IOC controllers.
Block all access to controller's config space from userland applications by
calling pci_cfg_access_lock() while diag reset is in progress and unlocking
it again after the controller comes back to ready state.
Link: https://lore.kernel.org/r/20210330105137.20728-1-sreekanth.reddy@broadcom.com
Cc: stable@vger.kernel.org #v5.4.108+
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Whenever the driver is adding a vSES to virtual-phys list it is
reinitializing the list head. Hence those vSES devices which were added
previously are lost.
Stop reinitializing the list every time a new vSES device is added.
Link: https://lore.kernel.org/r/20210330105004.20413-1-sreekanth.reddy@broadcom.com
Cc: stable@vger.kernel.org #v5.11.10+
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Pull 5.12/scsi-fixes into the 5.13 SCSI tree to provide a baseline for
some UFS changes that would otherwise cause conflicts during the
merge.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When kzalloc() returns NULL, no error return code of mpt3sas_base_attach()
is assigned. To fix this bug, r is assigned with -ENOMEM in this case.
Link: https://lore.kernel.org/r/20210308035241.3288-1-baijiaju1990@gmail.com
Fixes: c696f7b83e ("scsi: mpt3sas: Implement device_remove_in_progress check in IOCTL path")
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes the following W=1 kernel build warning(s):
drivers/scsi/mpt3sas/mpt3sas_scsih.c:763: warning: Function parameter or member 'sas_address' not described in '__mpt3sas_get_sdev_by_addr'
drivers/scsi/mpt3sas/mpt3sas_scsih.c:763: warning: expecting prototype for mpt3sas_get_sdev_by_addr(). Prototype was for __mpt3sas_get_sdev_by_addr() instead
drivers/scsi/mpt3sas/mpt3sas_scsih.c:4535: warning: expecting prototype for _scsih_check_for_pending_internal_cmds(). Prototype was for mpt3sas_check_for_pending_internal_cmds() instead
drivers/scsi/mpt3sas/mpt3sas_scsih.c:6188: warning: Function parameter or member 'port_entry' not described in '_scsih_look_and_get_matched_port_entry'
drivers/scsi/mpt3sas/mpt3sas_scsih.c:6188: warning: Function parameter or member 'matched_port_entry' not described in '_scsih_look_and_get_matched_port_entry'
drivers/scsi/mpt3sas/mpt3sas_scsih.c:6188: warning: Function parameter or member 'count' not described in '_scsih_look_and_get_matched_port_entry'
drivers/scsi/mpt3sas/mpt3sas_scsih.c:6959: warning: Function parameter or member 'port' not described in 'mpt3sas_expander_remove'
drivers/scsi/mpt3sas/mpt3sas_scsih.c:10494: warning: expecting prototype for mpt3sas_scsih_reset_handler(). Prototype was for mpt3sas_scsih_pre_reset_handler() instead
drivers/scsi/mpt3sas/mpt3sas_scsih.c:10536: warning: expecting prototype for mpt3sas_scsih_reset_handler(). Prototype was for mpt3sas_scsih_reset_done_handler() instead
drivers/scsi/mpt3sas/mpt3sas_scsih.c:12303: warning: expecting prototype for scsih__ncq_prio_supp(). Prototype was for scsih_ncq_prio_supp() instead
Link: https://lore.kernel.org/r/20210317091230.2912389-15-lee.jones@linaro.org
Cc: Sathya Prakash <sathya.prakash@broadcom.com>
Cc: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: MPT-FusionLinux.pdl@avagotech.com
Cc: MPT-FusionLinux.pdl@broadcom.com
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
According to the MPI specification, reply post array buffers can not cross
a 4 GB boundary.
While allocating, if any buffer crosses the 4 GB boundary, then:
- Release the already allocated memory pools; and
- Reallocate them by changing the DMA coherent mask to 32-bit
Link: https://lore.kernel.org/r/20210305102904.7560-7-suganath-prabu.subramani@broadcom.com
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
According to the MPI specification, reply post buffers can not cross a 4 GB
boundary.
While allocating, if any buffer crosses the 4 GB boundary, then:
- Release the already allocated memory pools; and
- Reallocate them by changing the DMA coherent mask to 32-bit
Link: https://lore.kernel.org/r/20210305102904.7560-6-suganath-prabu.subramani@broadcom.com
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
According to the MPI specification, reply buffers can not cross a 4 GB
boundary.
While allocating, if any buffer crosses the 4 GB boundary, then:
- Release the already allocated memory pools; and
- Reallocate them by changing the DMA coherent mask to 32-bit
Link: https://lore.kernel.org/r/20210305102904.7560-5-suganath-prabu.subramani@broadcom.com
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
According to the MPI specification, sense buffers can not cross a 4 GB
boundary.
While allocating, if any buffer crosses the 4 GB boundary, then:
- Release the already allocated memory pools; and
- Reallocate them by changing the DMA coherent mask to 32-bit
Link: https://lore.kernel.org/r/20210305102904.7560-4-suganath-prabu.subramani@broadcom.com
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
According to the MPI specification, chain buffers can not cross a 4 GB
boundary.
While allocating, if any buffer crosses the 4 GB boundary, then:
- Release the already allocated memory pools; and
- Reallocate them by changing the DMA coherent mask to 32-bit
Link: https://lore.kernel.org/r/20210305102904.7560-3-suganath-prabu.subramani@broadcom.com
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
According to the MPI specification, PCIe SGL buffers can not cross a 4 GB
boundary.
While allocating, if any buffer crosses the 4 GB boundary, then:
- Release the already allocated memory pools; and
- Reallocate them by changing the DMA coherent mask to 32-bit
Link: https://lore.kernel.org/r/20210305102904.7560-2-suganath-prabu.subramani@broadcom.com
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Dynamic memory allocation isn't actually needed and it can be replaced by
statically allocating memory for struct object io_unit_pg3 with 36
hardcoded entries for its GPIOVal array.
Also, this helps the with ongoing efforts to enable -Warray-bounds by
fixing the following warning:
drivers/scsi/mpt3sas/mpt3sas_ctl.c: In function ‘BRM_status_show’:
drivers/scsi/mpt3sas/mpt3sas_ctl.c:3257:63: warning: array subscript 24 is above array bounds of ‘U16[1]’ {aka ‘short unsigned int[1]’} [-Warray-bounds]
3257 | backup_rail_monitor_status = le16_to_cpu(io_unit_pg3->GPIOVal[24]);
./include/uapi/linux/byteorder/little_endian.h:36:51: note: in definition of macro ‘__le16_to_cpu’
36 | #define __le16_to_cpu(x) ((__force __u16)(__le16)(x))
| ^
drivers/scsi/mpt3sas/mpt3sas_ctl.c:3257:31: note: in expansion of macro ‘le16_to_cpu’
3257 | backup_rail_monitor_status = le16_to_cpu(io_unit_pg3->GPIOVal[24]);
Link: https://github.com/KSPP/linux/issues/109
Link: https://lore.kernel.org/lkml/202103101058.16ED27BE3@keescook/
Link: https://lore.kernel.org/r/20210310235951.GA108661@embeddedor
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
mpt3sas_get_port_by_id() can be called when a spinlock is held. Use
GFP_ATOMIC instead of GFP_KERNEL when allocating memory.
Issue spotted by call_kern.cocci:
./drivers/scsi/mpt3sas/mpt3sas_scsih.c:416:42-52: ERROR: function mpt3sas_get_port_by_id called on line 7125 inside lock on line 7123 but uses GFP_KERNEL
./drivers/scsi/mpt3sas/mpt3sas_scsih.c:416:42-52: ERROR: function mpt3sas_get_port_by_id called on line 6842 inside lock on line 6839 but uses GFP_KERNEL
./drivers/scsi/mpt3sas/mpt3sas_scsih.c:416:42-52: ERROR: function mpt3sas_get_port_by_id called on line 6854 inside lock on line 6851 but uses GFP_KERNEL
./drivers/scsi/mpt3sas/mpt3sas_scsih.c:416:42-52: ERROR: function mpt3sas_get_port_by_id called on line 7706 inside lock on line 7702 but uses GFP_KERNEL
./drivers/scsi/mpt3sas/mpt3sas_scsih.c:416:42-52: ERROR: function mpt3sas_get_port_by_id called on line 10260 inside lock on line 10256 but uses GFP_KERNEL
Link: https://lore.kernel.org/r/20210220093951.905362-1-christophe.jaillet@wanadoo.fr
Fixes: 324c122fc0 ("scsi: mpt3sas: Add module parameter multipath_on_hba")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes the following W=1 kernel build warning(s):
drivers/scsi/mpt3sas/mpt3sas_ctl.c:463: warning: expecting prototype for mpt3sas_ctl_reset_handler(). Prototype was for mpt3sas_ctl_pre_reset_handler() instead
drivers/scsi/mpt3sas/mpt3sas_ctl.c:495: warning: expecting prototype for mpt3sas_ctl_reset_handler(). Prototype was for mpt3sas_ctl_clear_outstanding_ioctls() instead
drivers/scsi/mpt3sas/mpt3sas_ctl.c:512: warning: expecting prototype for mpt3sas_ctl_reset_handler(). Prototype was for mpt3sas_ctl_reset_done_handler() instead
drivers/scsi/mpt3sas/mpt3sas_ctl.c:2771: warning: expecting prototype for _ ctl_ioctl_compat(). Prototype was for _ctl_ioctl_compat() instead
drivers/scsi/mpt3sas/mpt3sas_ctl.c:2789: warning: expecting prototype for _ ctl_mpt2_ioctl_compat(). Prototype was for _ctl_mpt2_ioctl_compat() instead
drivers/scsi/mpt3sas/mpt3sas_ctl.c:3061: warning: expecting prototype for sas_address_show(). Prototype was for host_sas_address_show() instead
drivers/scsi/mpt3sas/mpt3sas_ctl.c:3682: warning: expecting prototype for diag_trigger_scsi_show(). Prototype was for diag_trigger_mpi_show() instead
drivers/scsi/mpt3sas/mpt3sas_ctl.c:3941: warning: expecting prototype for sas_ncq_io_prio_show(). Prototype was for sas_ncq_prio_enable_show() instead
Link: https://lore.kernel.org/r/20210312094738.2207817-10-lee.jones@linaro.org
Cc: Sathya Prakash <sathya.prakash@broadcom.com>
Cc: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: MPT-FusionLinux.pdl@avagotech.com
Cc: MPT-FusionLinux.pdl@broadcom.com
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes the following W=1 kernel build warning(s):
drivers/scsi/mpt3sas/mpt3sas_transport.c:71: warning: Function parameter or member 'phy' not described in '_transport_get_port_id_by_sas_phy'
drivers/scsi/mpt3sas/mpt3sas_transport.c:354: warning: Function parameter or member 'port_id' not described in '_transport_expander_report_manufacture'
drivers/scsi/mpt3sas/mpt3sas_transport.c:354: warning: expecting prototype for transport_expander_report_manufacture(). Prototype was for _transport_expander_report_manufacture() instead
drivers/scsi/mpt3sas/mpt3sas_transport.c:684: warning: Function parameter or member 'hba_port' not described in 'mpt3sas_transport_port_add'
drivers/scsi/mpt3sas/mpt3sas_transport.c:684: warning: Excess function parameter 'port' description in 'mpt3sas_transport_port_add'
Link: https://lore.kernel.org/r/20210312094738.2207817-7-lee.jones@linaro.org
Cc: Sathya Prakash <sathya.prakash@broadcom.com>
Cc: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: MPT-FusionLinux.pdl@avagotech.com
Cc: MPT-FusionLinux.pdl@broadcom.com
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes the following W=1 kernel build warning(s):
drivers/scsi/mpt3sas/mpt3sas_config.c:1795: warning: expecting prototype for mpt3sas_config_set_driver_trigger_pg0(). Prototype was for _config_set_driver_trigger_pg0() instead
drivers/scsi/mpt3sas/mpt3sas_config.c:1929: warning: expecting prototype for mpt3sas_config_set_driver_trigger_pg1(). Prototype was for _config_set_driver_trigger_pg1() instead
drivers/scsi/mpt3sas/mpt3sas_config.c:2080: warning: expecting prototype for mpt3sas_config_set_driver_trigger_pg2(). Prototype was for _config_set_driver_trigger_pg2() instead
drivers/scsi/mpt3sas/mpt3sas_config.c:2240: warning: expecting prototype for mpt3sas_config_set_driver_trigger_pg3(). Prototype was for _config_set_driver_trigger_pg3() instead
drivers/scsi/mpt3sas/mpt3sas_config.c:2397: warning: expecting prototype for mpt3sas_config_set_driver_trigger_pg4(). Prototype was for _config_set_driver_trigger_pg4() instead
Link: https://lore.kernel.org/r/20210312094738.2207817-2-lee.jones@linaro.org
Cc: Sathya Prakash <sathya.prakash@broadcom.com>
Cc: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: MPT-FusionLinux.pdl@avagotech.com
Cc: MPT-FusionLinux.pdl@broadcom.com
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes the following W=1 kernel build warning(s):
drivers/scsi/mpt3sas/mpt3sas_scsih.c: In function ‘_scsih_scan_for_devices_after_reset’:
drivers/scsi/mpt3sas/mpt3sas_scsih.c:10473:1: warning: the frame size of 1064 bytes is larger than 1024 bytes [-Wframe-larger-than=]
Link: https://lore.kernel.org/r/20210303144631.3175331-31-lee.jones@linaro.org
Cc: Sathya Prakash <sathya.prakash@broadcom.com>
Cc: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: MPT-FusionLinux.pdl@avagotech.com
Cc: MPT-FusionLinux.pdl@broadcom.com
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
SCSI currently uses an atomic variable to track queue depth for each
attached device. The queue depth depends on many factors such as transport
type and device implementation. In addition, the SCSI device queue depth is
not a static entity but changes over time as a result of congestion
management.
While blk-mq currently tracks queue depth for each hctx, it can't easily be
changed to accommodate the SCSI per-device requirement.
The current approach of using an atomic variable doesn't scale well when
there are lots of CPU cores and the disk is very fast. IOPS can be
substantially impacted by the atomic in the hot path.
Replace the atomic variable sdev->device_busy with an sbitmap for tracking
the SCSI device queue depth.
It has been observed that IOPS is improved ~30% by this patchset in the
following test:
1) test machine(32 logical CPU cores)
Thread(s) per core: 2
Core(s) per socket: 8
Socket(s): 2
NUMA node(s): 2
Model name: Intel(R) Xeon(R) Silver 4110 CPU @ 2.10GHz
2) setup scsi_debug:
modprobe scsi_debug virtual_gb=128 max_luns=1 submit_queues=32 delay=0 max_queue=256
3) fio script:
fio --rw=randread --size=128G --direct=1 --ioengine=libaio --iodepth=2048 \
--numjobs=32 --bs=4k --group_reporting=1 --group_reporting=1 --runtime=60 \
--loops=10000 --name=job1 --filename=/dev/sdN
[mkp: fix device_busy reference in mpt3sas]
Link: https://lore.kernel.org/r/20210122023317.687987-14-ming.lei@redhat.com
Link: https://lore.kernel.org/linux-block/20200119071432.18558-6-ming.lei@redhat.com/
Cc: Omar Sandoval <osandov@fb.com>
Cc: Kashyap Desai <kashyap.desai@broadcom.com>
Cc: Sumanesh Samanta <sumanesh.samanta@broadcom.com>
Cc: Ewan D. Milne <emilne@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Tested-by: Sumanesh Samanta <sumanesh.samanta@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When a host trace buffer is released, applications never know for what
reason the buffer is released. Add a new IOCTL MPT3ADDNLDIAGQUERY to
provide the trigger information due to which the diag buffer is released.
Link: https://lore.kernel.org/r/20210204033724.1345-2-suganath-prabu.subramani@broadcom.com
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
MPT Fusion adapters can steer completions to individual queues and we now
have support for shared host-wide tags in the I/O stack. The addition of
the host-wide tags allows us to enable multiqueue support for MPT Fusion
adapters. Once host-wise tags are enabled, the CPU hotplug feature is also
supported.
Allow use of host-wide tags to be disabled through the "host_tagset_enable"
module parameter. Once we do not have any major performance regressions
using host-wide tags, we will drop the hand-crafted interrupt affinity
settings.
Performance is meeting expectations. About 3.1M IOPS using 24 Drive SSD on
Aero controllers.
Link: https://lore.kernel.org/r/20210202095832.23072-1-sreekanth.reddy@broadcom.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently the driver allocates memory for ReplyPostFree queues in chunks of
16. In resource constrained environments--such as VM with 1 GB RAM and 2
CPUs--memory allocation for ReplyPostFree pools may fail because the driver
tries to allocate a memory for 16 ReplyPostFree queues even though the
actual number needed is 2.
Change the driver to allocate memory for only the actual number of queues
needed if the ReplyPostFree queue count is less than 16.
Link: https://lore.kernel.org/r/20210201141522.25363-1-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix the following coccicheck warning:
./drivers/scsi/mpt3sas/mpt3sas_base.c:2424:5-20: WARNING: Comparison of 0/1
to bool variable
Link: https://lore.kernel.org/r/1610355253-25960-1-git-send-email-abaci-bugfix@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: YANG LI <abaci-bugfix@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This is a load of driver fixes (12 ufs, 1 mpt3sas, 1 cxgbi). The big
core two fixes are for power management ("block: Do not accept any
requests while suspended" and "block: Fix a race in the runtime power
management code") which finally sorts out the resume problems we've
occasionally been having. To make the resume fix, there are seven
necessary precursors which effectively renames REQ_PREEMPT to REQ_PM,
so every "special" request in block is automatically a power
management exempt one. All of the non-PM preempt cases are removed
except for the one in the SCSI Parallel Interface (spi) domain
validation which is a genuine case where we have to run requests at
high priority to validate the bus so this becomes an autopm get/put
protected request.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCX+98LyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishYvLAP9K+HBT
Lrkt3VWc9gq6F36+QH/SeW8IyXGaj77ysFHXxwD/UambRjRK8IA24mvf9sWeLLj6
p8CqCHUkCXqP48IiymE=
=NHrx
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is a load of driver fixes (12 ufs, 1 mpt3sas, 1 cxgbi).
The big core two fixes are for power management ("block: Do not accept
any requests while suspended" and "block: Fix a race in the runtime
power management code") which finally sorts out the resume problems
we've occasionally been having.
To make the resume fix, there are seven necessary precursors which
effectively renames REQ_PREEMPT to REQ_PM, so every "special" request
in block is automatically a power management exempt one.
All of the non-PM preempt cases are removed except for the one in the
SCSI Parallel Interface (spi) domain validation which is a genuine
case where we have to run requests at high priority to validate the
bus so this becomes an autopm get/put protected request"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (22 commits)
scsi: cxgb4i: Fix TLS dependency
scsi: ufs: Un-inline ufshcd_vops_device_reset function
scsi: ufs: Re-enable WriteBooster after device reset
scsi: ufs-mediatek: Use correct path to fix compile error
scsi: mpt3sas: Signedness bug in _base_get_diag_triggers()
scsi: block: Do not accept any requests while suspended
scsi: block: Remove RQF_PREEMPT and BLK_MQ_REQ_PREEMPT
scsi: core: Only process PM requests if rpm_status != RPM_ACTIVE
scsi: scsi_transport_spi: Set RQF_PM for domain validation commands
scsi: ide: Mark power management requests with RQF_PM instead of RQF_PREEMPT
scsi: ide: Do not set the RQF_PREEMPT flag for sense requests
scsi: block: Introduce BLK_MQ_REQ_PM
scsi: block: Fix a race in the runtime power management code
scsi: ufs-pci: Enable UFSHCD_CAP_RPM_AUTOSUSPEND for Intel controllers
scsi: ufs-pci: Fix recovery from hibernate exit errors for Intel controllers
scsi: ufs-pci: Ensure UFS device is in PowerDown mode for suspend-to-disk ->poweroff()
scsi: ufs-pci: Fix restore from S4 for Intel controllers
scsi: ufs-mediatek: Keep VCC always-on for specific devices
scsi: ufs: Allow regulators being always-on
scsi: ufs: Clear UAC for RPMB after ufshcd resets
...
This series consists of the usual driver updates (ufs, qla2xxx,
smartpqi, target, zfcp, fnic, mpt3sas, ibmvfc) plus a load of
cleanups, a major power management rework and a load of assorted minor
updates. There are a few core updates (formatting fixes being the big
one) but nothing major this cycle.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCX9o0KSYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishbOZAP9D5NTN
J7dJUo2MIMy84YBu+d9ag7yLlNiRWVY2yw5vHwD/Z7JjAVLwz/tzmyjU9//o2J6w
hwhOv6Uto89gLCWSEz8=
=KUPT
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This consists of the usual driver updates (ufs, qla2xxx, smartpqi,
target, zfcp, fnic, mpt3sas, ibmvfc) plus a load of cleanups, a major
power management rework and a load of assorted minor updates.
There are a few core updates (formatting fixes being the big one) but
nothing major this cycle"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (279 commits)
scsi: mpt3sas: Update driver version to 36.100.00.00
scsi: mpt3sas: Handle trigger page after firmware update
scsi: mpt3sas: Add persistent MPI trigger page
scsi: mpt3sas: Add persistent SCSI sense trigger page
scsi: mpt3sas: Add persistent Event trigger page
scsi: mpt3sas: Add persistent Master trigger page
scsi: mpt3sas: Add persistent trigger pages support
scsi: mpt3sas: Sync time periodically between driver and firmware
scsi: qla2xxx: Update version to 10.02.00.104-k
scsi: qla2xxx: Fix device loss on 4G and older HBAs
scsi: qla2xxx: If fcport is undergoing deletion complete I/O with retry
scsi: qla2xxx: Fix the call trace for flush workqueue
scsi: qla2xxx: Fix flash update in 28XX adapters on big endian machines
scsi: qla2xxx: Handle aborts correctly for port undergoing deletion
scsi: qla2xxx: Fix N2N and NVMe connect retry failure
scsi: qla2xxx: Fix FW initialization error on big endian machines
scsi: qla2xxx: Fix crash during driver load on big endian machines
scsi: qla2xxx: Fix compilation issue in PPC systems
scsi: qla2xxx: Don't check for fw_started while posting NVMe command
scsi: qla2xxx: Tear down session if FW say it is down
...
The "trigger_flags" variable needs to be signed for the error checking to
work.
Link: https://lore.kernel.org/r/X9DZH37bYPHwSQRP@mwanda
Fixes: aec93e8e23 ("scsi: mpt3sas: Add persistent trigger pages support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If a firmware update adds support for the trigger pages, then the driver
should handle this by writing the existing trigger data from the driver's
internal data structure to the corresponding trigger pages in NVRAM.
Also handle the case where the trigger page capability is no longer present
after a firmware downgrade.
Link: https://lore.kernel.org/r/20201126094311.8686-8-suganath-prabu.subramani@broadcom.com
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This page is used to store information about MPI (IOC Status & LogInfo)
triggers.
Driver Persistent Trigger Page-4 format:
-------------------------------------------------------
| 31 24 23 16 15 8 7 0| Byte
-------------------------------------------------------
| PageType | PageNumber | Reserved | PageVersion | 0x00
--------------------------------------------------------
| Reserved | ExtPageType | ExtPageLength | 0x04
--------------------------------------------------------
| Reserved | NumMpiTriggerEntries | 0x08
--------------------------------------------------------
| MPITriggerEntry[0] | 0x0C
--------------------------------------------------------
| … |
--------------------------------------------------------
| MPITriggerEntry[19] | 0xA4
--------------------------------------------------------
NumMpiTriggerEntries:
This field indicates number of MPI (IOC Status & LogInfo) trigger entries
stored in this page. Currently driver is supporting a maximum of 20-MPI
trigger entries.
MPITriggerEntry:
-----------------------------------------------------
| 31 16 15 0 |
-----------------------------------------------------
| Reserved | IOCStatus |
-----------------------------------------------------
| IOCLogInfo |
-----------------------------------------------------
IOCStatus => Status value from the IOC
IOCLogInfo => Specific value that supplements the IOCStatus.
Link: https://lore.kernel.org/r/20201126094311.8686-7-suganath-prabu.subramani@broadcom.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Trigger Page2 is used to store information about Event triggers:
31 24 23 16 15 8 7 0 Byte
-----------------------------------------------
|PageType |PageNumber |Reserved |PageVersion| 0x00
-----------------------------------------------
|Reserved |ExtPageType | ExtPageLength | 0x04
-----------------------------------------------
| Reserved | NumMPIEventTriggers | 0x08
-----------------------------------------------
| MPIEventTriggerEntries | 0x0C
| | 0xFC
-----------------------------------------------
Number of MPI Event Trigger Entries currently stored in this page. If this
is set to zero, there are no valid MPI-Event-Trigger entries available in
this page.
MPIEventTriggerEntry:
- MPIEventCode [15:00]
MPI Event code specified in MPI-Spec
- MPIEventCodeSpecific [16:31]
For Event Code “MPI2_EVENT_LOG_ENTRY_ADDED (0x0021)”,
this field specifies the Log-Entry-Qualifier.
For all other Event Codes, this field is reserved and not used
Maximum of 20-event trigger entries can be stored in this page.
Link: https://lore.kernel.org/r/20201126094311.8686-5-suganath-prabu.subramani@broadcom.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Trigger Page 1 is used to store information about Master triggers. Below
are the Master trigger conditions:
Bit[3] Trigger condition for Device Removal event
Bit[2] Trigger condition for TM command issued by driver
Bit[1] Trigger condition for Adapter reset issued by driver
Bit[0] Trigger condition for IOC Fault state
During driver load, if Master trigger type bit is enabled in the Persistent
Trigger Page0, then read the Persistent Trigger Page1 and update the IOC
instance's diag_trigger_master.MasterData with Persistent Trigger Page1's
MasterTriggerFlags.
Link: https://lore.kernel.org/r/20201126094311.8686-4-suganath-prabu.subramani@broadcom.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The user can set trigger values in order to collect the IOC's host trace
buffer automatically upon detecting certain conditions. However, the
trigger values that the user sets are not persistent across system reboot
or reload of the driver.
In order to make the user trigger settings persistent, these trigger values
need to be saved in the IOC's NVRAM pages:
- Driver Persistent Trigger Page 0:
This page is used to store list of trigger types that are enabled
- Driver Persistent Trigger Page 1:
This page stores the list of Master triggers that are enabled
- Driver Persistent Trigger Page 2:
This page stores the list of MPI Event Triggers that are enabled
- Driver Persistent Trigger Page 3:
This page stores the list of SCSI Sense Triggers that are enabled
- Driver Persistent Trigger Page 4:
This page stores the list of IOCStatus-LogInfo Triggers that are
enabled.
Whenever user configures triggers, the driver persists the values in the
corresponding trigger pages. When the driver is subsequently reloaded, the
driver reads the values from the trigger pages and configures the triggers
accordingly.
During firmware upload operation, if the newer firmware supports the
trigger page feature, then driver persists the configured diag trigger
values to NVRAM.
Link: https://lore.kernel.org/r/20201126094311.8686-3-suganath-prabu.subramani@broadcom.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The controller time currently gets updated with host time during driver
load or when a controller reset is issued. I.e. when host issues the
IOCInit request message to the HBA firmware. This IOCInit message has a
field named 'TimeStamp' with which the host updates the controller time.
Sometimes controller time drifts with respect to the host and it is
difficult to correlate host logs with controller logs. Issuing a controller
reset to sync the time would impact in-flight I/O and is not a viable
option.
Instead the driver now sends an IO_UNIT_CONTROL Request to sync the time
periodically. This is done from the watchdog thread which gets invoked
every second.
The time synchronization interval is specified in the 'TimeSyncInterval'
field in Manufacturing Page11 by the controller:
TimeSyncInterval - 8 bits
bits 0-6: Time stamp Synchronization interval value
bit 7: Time stamp Synchronization interval unit,
(if this bit is one then Timestamp Synchronization
interval value is specified in terms of hours else
Timestamp Synchronization interval value is
specified in terms of minutes).
The driver keeps track of the timer using IOC's timestamp_update_count
field. This field value gets incremented whenever the watchdog thread gets
invoked. And whenever this field value is greater than or equal to the Time
Stamp Synchronization interval value, the driver sends the IO_UNIT_CONTROL
Request message to controller to update the time and then it resets the
timestamp_update_count field to zero.
Link: https://lore.kernel.org/r/20201126094311.8686-2-suganath-prabu.subramani@broadcom.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently the IOCInit request message timeout is set to 10s. This is not
sufficient in some scenarios such as during HBA FW downgrade operations.
Increase the IOCInit request timeout to 30s.
Link: https://lore.kernel.org/r/20201130082733.26120-1-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit c1a6c5ac42 ("scsi: mpt3sas: For NVME device, issue a protocol
level reset") modified the ioctl path 'timeout' variable type to u8 from
unsigned long, limiting the maximum timeout value that the driver can
support to 255 seconds.
If the management application is requesting a higher value the resulting
timeout will be zero. The operation times out immediately and the ioctl
request fails.
Change datatype back to unsigned long.
Link: https://lore.kernel.org/r/20201125094838.4340-1-suganath-prabu.subramani@broadcom.com
Fixes: c1a6c5ac42 ("scsi: mpt3sas: For NVME device, issue a protocol level reset")
Cc: <stable@vger.kernel.org> #v4.18+
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
_scsih_fw_event_cleanup_queue() waits for all outstanding firmware events
wokrqueue handlers to finish. If in_interrupt() is true, it cancels itself
and return early.
That in_interrupt() check is ill-defined and does not provide what the name
suggests: it does not cover all states in which it is safe to block and
call functions like cancel_work_sync().
That check is also not needed: _scsih_fw_event_cleanup_queue() is always
invoked from process context. Below is an analysis of its callers:
- scsih_remove(), bound to PCI ->remove(), process context
- scsih_shutdown(), bound to PCI ->shutdown(), process context
- mpt3sas_scsih_clear_outstanding_scsi_tm_commands(), called by
=> _base_clear_outstanding_commands(), called by
=>_base_fault_reset_work(), workqueue
=> mpt3sas_base_hard_reset_handler(), locks mutex
Remove the in_interrupt() check. Change _scsih_fw_event_cleanup_queue()
specification to a purely process-context function and mark it with
"Context: task, can sleep".
Link: https://lore.kernel.org/r/20201126132952.2287996-10-bigeasy@linutronix.de
Cc: Sathya Prakash <sathya.prakash@broadcom.com>
Cc: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com>
Cc: <MPT-FusionLinux.pdl@broadcom.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Drivers should do only device-specific jobs. But in general, drivers using
legacy PCI PM framework for .suspend()/.resume() have to manage many PCI
PM-related tasks themselves which can be done by PCI Core itself. This
brings extra load on the driver and it directly calls PCI helper functions
to handle them.
Switch to the new generic framework by updating function signatures and
define a "struct dev_pm_ops" variable to bind PM callbacks. Also, remove
unnecessary calls to the PCI Helper functions along with the legacy
.suspend & .resume bindings.
Link: https://lore.kernel.org/r/20201102164730.324035-17-vaibhavgupta40@gmail.com
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The driver calls pci_enable_wake(...., false) in scsih_resume(), and there
is no corresponding pci_enable_wake(...., true) in scsih_suspend(). Either
it should do enable-wake the device in .suspend() or should not invoke
pci_enable_wake() at all.
Concluding that this driver doesn't support enable-wake and PCI core calls
pci_enable_wake(pci_dev, PCI_D0, false) during resume, drop it from
scsih_resume().
Link: https://lore.kernel.org/r/20201102164730.324035-16-vaibhavgupta40@gmail.com
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes the following W=1 kernel build warning(s):
drivers/scsi/mpt3sas/mpt3sas_scsih.c:2778: warning: Function parameter or member 'ioc' not described in 'scsih_tm_cmd_map_status'
drivers/scsi/mpt3sas/mpt3sas_scsih.c:2778: warning: Function parameter or member 'channel' not described in 'scsih_tm_cmd_map_status'
drivers/scsi/mpt3sas/mpt3sas_scsih.c:2829: warning: Function parameter or member 'ioc' not described in 'scsih_tm_post_processing'
drivers/scsi/mpt3sas/mpt3sas_scsih.c:2829: warning: Function parameter or member 'channel' not described in 'scsih_tm_post_processing'
Link: https://lore.kernel.org/r/20201102142359.561122-3-lee.jones@linaro.org
Cc: Sathya Prakash <sathya.prakash@broadcom.com>
Cc: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com>
Cc: MPT-FusionLinux.pdl@avagotech.com
Cc: MPT-FusionLinux.pdl@broadcom.com
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
