mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-29 14:05:19 +08:00
ee84a3032b
81832 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Namjae Jeon
|
f5c779b7dd |
ksmbd: fix racy issue from session setup and logoff
This racy issue is triggered by sending concurrent session setup and logoff requests. This patch does not set connection status as KSMBD_SESS_GOOD if state is KSMBD_SESS_NEED_RECONNECT in session setup. And relookup session to validate if session is deleted in logoff. Cc: stable@vger.kernel.org Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-20481, ZDI-CAN-20590, ZDI-CAN-20596 Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> |
||
|
Namjae Jeon
|
3ac00a2ab6 |
ksmbd: fix NULL pointer dereference in smb2_get_info_filesystem()
If share is , share->path is NULL and it cause NULL pointer dereference issue. Cc: stable@vger.kernel.org Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-20479 Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> |
||
|
Namjae Jeon
|
6d7cb549c2 |
ksmbd: fix memleak in session setup
If client send session setup request with unknown NTLMSSP message type, session that does not included channel can be created. It will cause session memleak. because ksmbd_sessions_deregister() does not destroy session if channel is not included. This patch return error response if client send the request unknown NTLMSSP message type. Cc: stable@vger.kernel.org Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-20593 Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> |
||
Linus Torvalds
|
049a18f232 |
sysctl-6.4-rc1-v2
As mentioned on my first pull request for sysctl-next, for v6.4-rc1 we're very close to being able to deprecating register_sysctl_paths(). I was going to assess the situation after the first week of the merge window. That time is now and things are looking good. We only have one stragglers on the patch which had already an ACK for so I'm picking this up here now and the last patch is the one that uses an axe. Some careful eyeballing would be appreciated by others. If this doesn't get properly reviewed I can also just hold off on this in my tree for the next merge window. Either way is fine by me. I have boot tested the last patch and 0-day build completed successfully. -----BEGIN PGP SIGNATURE----- iQJGBAABCgAwFiEENnNq2KuOejlQLZofziMdCjCSiKcFAmRSsn0SHG1jZ3JvZkBr ZXJuZWwub3JnAAoJEM4jHQowkoinzzMQAK6ddUwQM32z6E2SY/Ku6ZDQJhVKxE+Y +HvghMqaGzr2eawEaASZzV6p//Q1aH4c2yaChyENa/O82QBXhbc2RBvdiAzQeJZx cUQ4C6Lc+BlpoB24Nes69F9j1LAEI5YXKMK911DKDu7LNNS7Ytxt1IOfM2RpyqRV 6+9vOvAqCSh9EEjZeZDrMlsYhBA+t3YIkU6JFMX7Upc2P7m//57inLsZyUZBqnou t9sfC0d1lDTZXZ0vSIk534VhoxXe1MkYERKkAciEprxbdNnqcsi4WMXKdXG6Mcpy O1ZuUXqndAfhTSHLkqNidtuDP29TTvcdz5tDfwmaJ3JUTt0cDvlC2T7J9WyXDfCZ XsR8Ik0/vEH/j9rVabF9fQ8DeTSLe9AgpaItHd6/LWI8UESs5k/wYi9O+7lhCf2p JZpXl3G1itKA9ABMD1GUEtC5hfWTUxkTEgPkXbqFuKtCl0mI8lD3FPFRbuhYNLa8 7R/6SN9h6/43C9Ffp2bY3c/gKQj51QlvGOSctahvdYSFkG8KXKhEnsDu0V6eLM9G QYrhvht8o9jbuKJKtEno9fjTlClVvXp5vARQQyy9OHyTuhU/Y8q2lH2BCZtFYZrM cpIFdfqB18tZmo7QfNHZPLfws2j3MqsbXFG8Q23BB7cJp1P5QdLJjmjnqbMq8xmk 3kdRMZ2Xkfcx =8VOt -----END PGP SIGNATURE----- Merge tag 'sysctl-6.4-rc1-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux Pull more sysctl updates from Luis Chamberlain: "As mentioned on my first pull request for sysctl-next, for v6.4-rc1 we're very close to being able to deprecating register_sysctl_paths(). I was going to assess the situation after the first week of the merge window. That time is now and things are looking good. We only have one which had already an ACK for so I'm picking this up here now and the last patch is the one that uses an axe. I have boot tested the last patch and 0-day build completed successfully" * tag 'sysctl-6.4-rc1-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: sysctl: remove register_sysctl_paths() kernel: pid_namespace: simplify sysctls with register_sysctl() |
||
|
Linus Torvalds
|
342528ff00 |
This pull request contains the following changes for UML:
- Make stub data pages configurable - Make it harder to mix user and kernel code by accident -----BEGIN PGP SIGNATURE----- iQJKBAABCAA0FiEEdgfidid8lnn52cLTZvlZhesYu8EFAmRSslcWHHJpY2hhcmRA c2lnbWEtc3Rhci5hdAAKCRBm+VmF6xi7wVbGEADWL/4rcVNqaD/b9V3bUXDkNhpG 81Jc9fXcx3OXV87GsxfadiQI05UaOhTAMWJlsdKUF0/IW5tSQSZc0QcDNxTs6aS1 NDkWvjk8s8OpbqdmV0cNKFmaeginrH4AuASajvNleU0BxX4ziqw6BPadih+wGVGz iVEd/M5YH2yet33pvD7Wzh3KZOPlo2OOKBqXzE6Snc3yoOiIfN95U8Cl23nxzMI4 F235LS5m+4+GWIMkYs6+hlWEa8SxSnsH/beQJxAybtetSHRxsDXOHlEpDI9olxYI +OFNqsFLDyhyjib2Snwt8HMES9VmMfUUwT7ZK1cChXN8Quix3lXAyz6rpocmdnL/ X1tzqWb1bz+yqrVRjtN3AGbcav+sQp4UWXsoExVsiz3lzaXfrbPvRZFucH2+SStK Wadyy2v2rHZKNq9sDLUBf5GJ0C4LrBAyT15ADim2L5/K7pZyI7AKSPcdU0Xc8m5y kMswml7FLaI+gsuKOBl7jySaoNDiVZFvQjsxd1+hn5cBNOcyBSt2rSErDw3geJgn pFzVkLtklfxMpHMm+bwXONBZMrXOBPNgo0gSkVrCVzO68x6j/MaBGLFazSqOKxbc UcVULhiomjIae4AcTomzOQx7oM1Xs3XuPo0x2RgJ3gMlCCZKoDNuqDgB3ZmPP/gq cbbHHveXEx7aMOPz0A== =Qb+I -----END PGP SIGNATURE----- Merge tag 'uml-for-linus-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux Pull uml updates from Richard Weinberger: - Make stub data pages configurable - Make it harder to mix user and kernel code by accident * tag 'uml-for-linus-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux: um: make stub data pages size tweakable um: prevent user code in modules um: further clean up user_syms um: don't export printf() um: hostfs: define our own API boundary um: add __weak for exported functions |
||
|
Linus Torvalds
|
9f2692326b |
This pull request contains updates for UBI and UBIFS
UBI: - Fix error value for try_write_vid_and_data() - Minor cleanups UBIFS: - Fixes for various memory leaks - Minor cleanups -----BEGIN PGP SIGNATURE----- iQJKBAABCAA0FiEEdgfidid8lnn52cLTZvlZhesYu8EFAmRSs7cWHHJpY2hhcmRA c2lnbWEtc3Rhci5hdAAKCRBm+VmF6xi7wcx4D/9zdLoaz3jv7P8vIMwHW/1Ewcjz Muvd5zPha31pjExK9Q90G8GzWX24rVUUXJPzO9zi88ayPiM0kD/lj4g8VD2a7E+G khK7K87ar9PitGeydzfByCed33tBaZ3XrDwOct2Byikdpl/lH6VQN4f6byKuAosA hSHw3c3Cf8XqnVq//mZTga9P+I0//gsTVBYMGEy4aaH5Ypi6kYz32GG5ERnYJpTG pRNon+CQWY6/+SfA1RAir2DqPU++Q5K50rErb1VQ2A/CdybbxgXZWUZ0zt3JHmdY CuoUSqIUFg/Abw57hDO+b+BbRMda2LHRO+xp/jCX325uQoBOnDhXQqr5g44kYFfI mxI1v/VZVmecyh5lYqxMoAEtHMOUOZGhOEiVgWNuQX8pl+9vUEd0gHuuo2d6woiI qM+W8kaZIWbBXnvQ8hzjMYuhWvMLpD2Lq2ZQCqkE/gNUgrdCk4D6G3fVd1x7Yypr iIbcg73xFyTurnIw20xqI03Acj0tbL3ofFMrxD6lS4y4drGPQxrKupN0jMTseHHB ZhxbB1zmYDntBCvQQSox3MCghFh4I5FSS5Dj6u6alAcmyctzOEbktC2hiGLtdGAH xhSKbflLogy8+W7GI4hhAOZNcBW3mqCFi1smlPSgo1m3a56gehw9tqoqBz5OLzGI BeusDNFBi1vgnGCsSw== =3ows -----END PGP SIGNATURE----- Merge tag 'ubifs-for-linus-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs Pull UBI and UBIFS updates from Richard Weinberger: "UBI: - Fix error value for try_write_vid_and_data() - Minor cleanups UBIFS: - Fixes for various memory leaks - Minor cleanups" * tag 'ubifs-for-linus-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs: ubifs: Fix memleak when insert_old_idx() failed Revert "ubifs: dirty_cow_znode: Fix memleak in error handling path" ubifs: Fix memory leak in do_rename ubifs: Free memory for tmpfile name ubi: Fix return value overwrite issue in try_write_vid_and_data() ubifs: Remove return in compr_exit() ubi: Simplify bool conversion |
||
Josef Bacik
|
d246331b78 |
btrfs: don't free qgroup space unless specified
Boris noticed in his simple quotas testing that he was getting a leak
with Sweet Tea's change to subvol create that stopped doing a
transaction commit. This was just a side effect of that change.
In the delayed inode code we have an optimization that will free extra
reservations if we think we can pack a dir item into an already modified
leaf. Previously this wouldn't be triggered in the subvolume create
case because we'd commit the transaction, it was still possible but
much harder to trigger. It could actually be triggered if we did a
mkdir && subvol create with qgroups enabled.
This occurs because in btrfs_insert_delayed_dir_index(), which gets
called when we're adding the dir item, we do the following:
btrfs_block_rsv_release(fs_info, trans->block_rsv, bytes, NULL);
if we're able to skip reserving space.
The problem here is that trans->block_rsv points at the temporary block
rsv for the subvolume create, which has qgroup reservations in the block
rsv.
This is a problem because btrfs_block_rsv_release() will do the
following:
if (block_rsv->qgroup_rsv_reserved >= block_rsv->qgroup_rsv_size) {
qgroup_to_release = block_rsv->qgroup_rsv_reserved -
block_rsv->qgroup_rsv_size;
block_rsv->qgroup_rsv_reserved = block_rsv->qgroup_rsv_size;
}
The temporary block rsv just has ->qgroup_rsv_reserved set,
->qgroup_rsv_size == 0. The optimization in
btrfs_insert_delayed_dir_index() sets ->qgroup_rsv_reserved = 0. Then
later on when we call btrfs_subvolume_release_metadata() which has
btrfs_block_rsv_release(fs_info, rsv, (u64)-1, &qgroup_to_release);
btrfs_qgroup_convert_reserved_meta(root, qgroup_to_release);
qgroup_to_release is set to 0, and we do not convert the reserved
metadata space.
The problem here is that the block rsv code has been unconditionally
messing with ->qgroup_rsv_reserved, because the main place this is used
is delalloc, and any time we call btrfs_block_rsv_release() we do it
with qgroup_to_release set, and thus do the proper accounting.
The subvolume code is the only other code that uses the qgroup
reservation stuff, but it's intermingled with the above optimization,
and thus was getting its reservation freed out from underneath it and
thus leaking the reserved space.
The solution is to simply not mess with the qgroup reservations if we
don't have qgroup_to_release set. This works with the existing code as
anything that messes with the delalloc reservations always have
qgroup_to_release set. This fixes the leak that Boris was observing.
Reviewed-by: Qu Wenruo <wqu@suse.com>
CC: stable@vger.kernel.org # 5.4+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
||
Luis Chamberlain
|
0199849acd |
sysctl: remove register_sysctl_paths()
The deprecation for register_sysctl_paths() is over. We can rejoice as
we nuke register_sysctl_paths(). The routine register_sysctl_table()
was the only user left of register_sysctl_paths(), so we can now just
open code and move the implementation over to what used to be
to __register_sysctl_paths().
The old dynamic struct ctl_table_set *set is now the point to
sysctl_table_root.default_set.
The old dynamic const struct ctl_path *path was being used in the
routine register_sysctl_paths() with a static:
static const struct ctl_path null_path[] = { {} };
Since this is a null path we can now just simplfy the old routine
and remove its use as its always empty.
This saves us a total of 230 bytes.
$ ./scripts/bloat-o-meter vmlinux.old vmlinux
add/remove: 2/7 grow/shrink: 1/1 up/down: 1015/-1245 (-230)
Function old new delta
register_leaf_sysctl_tables.constprop - 524 +524
register_sysctl_table 22 497 +475
__pfx_register_leaf_sysctl_tables.constprop - 16 +16
null_path 8 - -8
__pfx_register_sysctl_paths 16 - -16
__pfx_register_leaf_sysctl_tables 16 - -16
__pfx___register_sysctl_paths 16 - -16
__register_sysctl_base 29 12 -17
register_sysctl_paths 18 - -18
register_leaf_sysctl_tables 534 - -534
__register_sysctl_paths 620 - -620
Total: Before=21259666, After=21259436, chg -0.00%
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
||
Kefeng Wang
|
245f092268 |
mm: hwpoison: coredump: support recovery from dump_user_range()
dump_user_range() is used to copy the user page to a coredump file, but if a hardware memory error occurred during copy, which called from __kernel_write_iter() in dump_user_range(), it crashes, CPU: 112 PID: 7014 Comm: mca-recover Not tainted 6.3.0-rc2 #425 pc : __memcpy+0x110/0x260 lr : _copy_from_iter+0x3bc/0x4c8 ... Call trace: __memcpy+0x110/0x260 copy_page_from_iter+0xcc/0x130 pipe_write+0x164/0x6d8 __kernel_write_iter+0x9c/0x210 dump_user_range+0xc8/0x1d8 elf_core_dump+0x308/0x368 do_coredump+0x2e8/0xa40 get_signal+0x59c/0x788 do_signal+0x118/0x1f8 do_notify_resume+0xf0/0x280 el0_da+0x130/0x138 el0t_64_sync_handler+0x68/0xc0 el0t_64_sync+0x188/0x190 Generally, the '->write_iter' of file ops will use copy_page_from_iter() and copy_page_from_iter_atomic(), change memcpy() to copy_mc_to_kernel() in both of them to handle #MC during source read, which stop coredump processing and kill the task instead of kernel panic, but the source address may not always a user address, so introduce a new copy_mc flag in struct iov_iter{} to indicate that the iter could do a safe memory copy, also introduce the helpers to set/cleck the flag, for now, it's only used in coredump's dump_user_range(), but it could expand to any other scenarios to fix the similar issue. Link: https://lkml.kernel.org/r/20230417045323.11054-1-wangkefeng.wang@huawei.com Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Christian Brauner <brauner@kernel.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Tong Tiangen <tongtiangen@huawei.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Tom Rix
|
fc412a6196 |
lockd: define nlm_port_min,max with CONFIG_SYSCTL
gcc with W=1 and ! CONFIG_SYSCTL
fs/lockd/svc.c:80:51: error: ‘nlm_port_max’ defined but not used [-Werror=unused-const-variable=]
80 | static const int nlm_port_min = 0, nlm_port_max = 65535;
| ^~~~~~~~~~~~
fs/lockd/svc.c:80:33: error: ‘nlm_port_min’ defined but not used [-Werror=unused-const-variable=]
80 | static const int nlm_port_min = 0, nlm_port_max = 65535;
| ^~~~~~~~~~~~
The only use of these variables is when CONFIG_SYSCTL
is defined, so their definition should be likewise conditional.
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
||
|
Tom Rix
|
340086da9a |
nfsd: define exports_proc_ops with CONFIG_PROC_FS
gcc with W=1 and ! CONFIG_PROC_FS
fs/nfsd/nfsctl.c:161:30: error: ‘exports_proc_ops’
defined but not used [-Werror=unused-const-variable=]
161 | static const struct proc_ops exports_proc_ops = {
| ^~~~~~~~~~~~~~~~
The only use of exports_proc_ops is when CONFIG_PROC_FS
is defined, so its definition should be likewise conditional.
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
||
Marc Dionne
|
9ea4eff4b6 |
afs: Avoid endless loop if file is larger than expected
afs_read_dir fetches an amount of data that's based on what the inode
size is thought to be. If the file on the server is larger than what
was fetched, the code rechecks i_size and retries. If the local i_size
was not properly updated, this can lead to an endless loop of fetching
i_size from the server and noticing each time that the size is larger on
the server.
If it is known that the remote size is larger than i_size, bump up the
fetch size to that size.
Fixes:
|
||
David Howells
|
45f66fa03b |
afs: Fix getattr to report server i_size on dirs, not local size
Fix afs_getattr() to report the server's idea of the file size of a
directory rather than the local size. The local size may differ as we edit
the local copy to avoid having to redownload it and we may end up with a
differently structured blob of a different size.
However, if the directory is discarded from the pagecache we then download
it again and the user may see the directory file size apparently change.
Fixes:
|
||
|
Marc Dionne
|
d7f74e9a91 |
afs: Fix updating of i_size with dv jump from server
If the data version returned from the server is larger than expected,
the local data is invalidated, but we may still want to note the remote
file size.
Since we're setting change_size, we have to also set data_changed
for the i_size to get updated.
Fixes:
|
||
Paulo Alcantara
|
90c49fce1c |
cifs: fix potential use-after-free bugs in TCP_Server_Info::hostname
TCP_Server_Info::hostname may be updated once or many times during reconnect, so protect its access outside reconnect path as well and then prevent any potential use-after-free bugs. Cc: stable@vger.kernel.org Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com> Signed-off-by: Steve French <stfrench@microsoft.com> |
||
|
Paulo Alcantara
|
1810769e3a |
cifs: print smb3_fs_context::source when mounting
Print full device name (UNC + optional prefix) from @old_ctx->source when printing info about mount. Before patch mount.cifs //srv/share/dir /mnt -o ... dmesg ... CIFS: Attempting to mount \\srv\share After patch mount.cifs //srv/share/dir /mnt -o ... dmesg ... CIFS: Attempting to mount //srv/share/dir Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com> Signed-off-by: Steve French <stfrench@microsoft.com> |
||
|
Paulo Alcantara
|
5bff9f741a |
cifs: protect session status check in smb2_reconnect()
Use @ses->ses_lock to protect access of @ses->ses_status. Cc: stable@vger.kernel.org Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com> Signed-off-by: Steve French <stfrench@microsoft.com> |
||
Steve French
|
3d6b15a8f3 |
SMB3.1.1: correct definition for app_instance_id create contexts
The name lengths were incorrect for two create contexts.
SMB2_CREATE_APP_INSTANCE_ID
SMB2_CREATE_APP_INSTANCE_VERSION
Update the definitions for these two to match the protocol specs.
Acked-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Reviewed-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
||
Boris Burkov
|
e7db9e5c6b |
btrfs: fix encoded write i_size corruption with no-holes
We have observed a btrfs filesystem corruption on workloads using
no-holes and encoded writes via send stream v2. The symptom is that a
file appears to be truncated to the end of its last aligned extent, even
though the final unaligned extent and even the file extent and otherwise
correctly updated inode item have been written.
So if we were writing out a 1MiB+X file via 8 128K extents and one
extent of length X, i_size would be set to 1MiB, but the ninth extent,
nbyte, etc. would all appear correct otherwise.
The source of the race is a narrow (one line of code) window in which a
no-holes fs has read in an updated i_size, but has not yet set a shared
disk_i_size variable to write. Therefore, if two ordered extents run in
parallel (par for the course for receive workloads), the following
sequence can play out: (following "threads" a bit loosely, since there
are callbacks involved for endio but extra threads aren't needed to
cause the issue)
ENC-WR1 (second to last) ENC-WR2 (last)
------- -------
btrfs_do_encoded_write
set i_size = 1M
submit bio B1 ending at 1M
endio B1
btrfs_inode_safe_disk_i_size_write
local i_size = 1M
falls off a cliff for some reason
btrfs_do_encoded_write
set i_size = 1M+X
submit bio B2 ending at 1M+X
endio B2
btrfs_inode_safe_disk_i_size_write
local i_size = 1M+X
disk_i_size = 1M+X
disk_i_size = 1M
btrfs_delayed_update_inode
btrfs_delayed_update_inode
And the delayed inode ends up filled with nbytes=1M+X and isize=1M, and
writes respect i_size and present a corrupted file missing its last
extents.
Fix this by holding the inode lock in the no-holes case so that a thread
can't sneak in a write to disk_i_size that gets overwritten with an out
of date i_size.
Fixes:
|
||
Darrick J. Wong
|
2254a7396a |
xfs: fix xfs_inodegc_stop racing with mod_delayed_work
syzbot reported this warning from the faux inodegc shrinker that tries
to kick off inodegc work:
------------[ cut here ]------------
WARNING: CPU: 1 PID: 102 at kernel/workqueue.c:1445 __queue_work+0xd44/0x1120 kernel/workqueue.c:1444
RIP: 0010:__queue_work+0xd44/0x1120 kernel/workqueue.c:1444
Call Trace:
__queue_delayed_work+0x1c8/0x270 kernel/workqueue.c:1672
mod_delayed_work_on+0xe1/0x220 kernel/workqueue.c:1746
xfs_inodegc_shrinker_scan fs/xfs/xfs_icache.c:2212 [inline]
xfs_inodegc_shrinker_scan+0x250/0x4f0 fs/xfs/xfs_icache.c:2191
do_shrink_slab+0x428/0xaa0 mm/vmscan.c:853
shrink_slab+0x175/0x660 mm/vmscan.c:1013
shrink_one+0x502/0x810 mm/vmscan.c:5343
shrink_many mm/vmscan.c:5394 [inline]
lru_gen_shrink_node mm/vmscan.c:5511 [inline]
shrink_node+0x2064/0x35f0 mm/vmscan.c:6459
kswapd_shrink_node mm/vmscan.c:7262 [inline]
balance_pgdat+0xa02/0x1ac0 mm/vmscan.c:7452
kswapd+0x677/0xd60 mm/vmscan.c:7712
kthread+0x2e8/0x3a0 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308
This warning corresponds to this code in __queue_work:
/*
* For a draining wq, only works from the same workqueue are
* allowed. The __WQ_DESTROYING helps to spot the issue that
* queues a new work item to a wq after destroy_workqueue(wq).
*/
if (unlikely(wq->flags & (__WQ_DESTROYING | __WQ_DRAINING) &&
WARN_ON_ONCE(!is_chained_work(wq))))
return;
For this to trip, we must have a thread draining the inodedgc workqueue
and a second thread trying to queue inodegc work to that workqueue.
This can happen if freezing or a ro remount race with reclaim poking our
faux inodegc shrinker and another thread dropping an unlinked O_RDONLY
file:
Thread 0 Thread 1 Thread 2
xfs_inodegc_stop
xfs_inodegc_shrinker_scan
xfs_is_inodegc_enabled
<yes, will continue>
xfs_clear_inodegc_enabled
xfs_inodegc_queue_all
<list empty, do not queue inodegc worker>
xfs_inodegc_queue
<add to list>
xfs_is_inodegc_enabled
<no, returns>
drain_workqueue
<set WQ_DRAINING>
llist_empty
<no, will queue list>
mod_delayed_work_on(..., 0)
__queue_work
<sees WQ_DRAINING, kaboom>
In other words, everything between the access to inodegc_enabled state
and the decision to poke the inodegc workqueue requires some kind of
coordination to avoid the WQ_DRAINING state. We could perhaps introduce
a lock here, but we could also try to eliminate WQ_DRAINING from the
picture.
We could replace the drain_workqueue call with a loop that flushes the
workqueue and queues workers as long as there is at least one inode
present in the per-cpu inodegc llists. We've disabled inodegc at this
point, so we know that the number of queued inodes will eventually hit
zero as long as xfs_inodegc_start cannot reactivate the workers.
There are four callers of xfs_inodegc_start. Three of them come from the
VFS with s_umount held: filesystem thawing, failed filesystem freezing,
and the rw remount transition. The fourth caller is mounting rw (no
remount or freezing possible).
There are three callers ofs xfs_inodegc_stop. One is unmounting (no
remount or thaw possible). Two of them come from the VFS with s_umount
held: fs freezing and ro remount transition.
Hence, it is correct to replace the drain_workqueue call with a loop
that drains the inodegc llists.
Fixes:
|
||
|
Darrick J. Wong
|
2d5f38a319 |
xfs: disable reaping in fscounters scrub
The fscounters scrub code doesn't work properly because it cannot quiesce updates to the percpu counters in the filesystem, hence it returns false corruption reports. This has been fixed properly in one of the online repair patchsets that are under review by replacing the xchk_disable_reaping calls with an exclusive filesystem freeze. Disabling background gc isn't sufficient to fix the problem. In other words, scrub doesn't need to call xfs_inodegc_stop, which is just as well since it wasn't correct to allow scrub to call xfs_inodegc_start when something else could be calling xfs_inodegc_stop (e.g. trying to freeze the filesystem). Neuter the scrubber for now, and remove the xchk_*_reaping functions. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com> |
||
|
Darrick J. Wong
|
b37c4c8339 |
xfs: check that per-cpu inodegc workers actually run on that cpu
Now that we've allegedly worked out the problem of the per-cpu inodegc workers being scheduled on the wrong cpu, let's put in a debugging knob to let us know if a worker ever gets mis-scheduled again. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com> |
||
|
Darrick J. Wong
|
03e0add80f |
xfs: explicitly specify cpu when forcing inodegc delayed work to run immediately
I've been noticing odd racing behavior in the inodegc code that could
only be explained by one cpu adding an inode to its inactivation llist
at the same time that another cpu is processing that cpu's llist.
Preemption is disabled between get/put_cpu_ptr, so the only explanation
is scheduler mayhem. I inserted the following debug code into
xfs_inodegc_worker (see the next patch):
ASSERT(gc->cpu == smp_processor_id());
This assertion tripped during overnight tests on the arm64 machines, but
curiously not on x86_64. I think we haven't observed any resource leaks
here because the lockfree list code can handle simultaneous llist_add
and llist_del_all functions operating on the same list. However, the
whole point of having percpu inodegc lists is to take advantage of warm
memory caches by inactivating inodes on the last processor to touch the
inode.
The incorrect scheduling seems to occur after an inodegc worker is
subjected to mod_delayed_work(). This wraps mod_delayed_work_on with
WORK_CPU_UNBOUND specified as the cpu number. Unbound allows for
scheduling on any cpu, not necessarily the same one that scheduled the
work.
Because preemption is disabled for as long as we have the gc pointer, I
think it's safe to use current_cpu() (aka smp_processor_id) to queue the
delayed work item on the correct cpu.
Fixes:
|
||
|
Darrick J. Wong
|
1bba82fe1a |
xfs: fix negative array access in xfs_getbmap
In commit |
||
|
Darrick J. Wong
|
1f1397b721 |
xfs: don't allocate into the data fork for an unshare request
For an unshare request, we only have to take action if the data fork has a shared mapping. We don't care if someone else set up a cow operation. If we find nothing in the data fork, return a hole to avoid allocating space. Note that fallocate will replace the delalloc reservation with an unwritten extent anyway, so this has no user-visible effects outside of avoiding unnecessary updates. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com> |
||
|
Darrick J. Wong
|
397b2d7e0f |
xfs: flush dirty data and drain directios before scrubbing cow fork
When we're scrubbing the COW fork, we need to take MMAPLOCK_EXCL to prevent page_mkwrite from modifying any inode state. The ILOCK should suffice to avoid confusing online fsck, but let's take the same locks that we do everywhere else. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com> |
||
|
Darrick J. Wong
|
8e698ee72c |
xfs: set bnobt/cntbt numrecs correctly when formatting new AGs
Through generic/300, I discovered that mkfs.xfs creates corrupt
filesystems when given these parameters:
# mkfs.xfs -d size=512M /dev/sda -f -d su=128k,sw=4 --unsupported
Filesystems formatted with --unsupported are not supported!!
meta-data=/dev/sda isize=512 agcount=8, agsize=16352 blks
= sectsz=512 attr=2, projid32bit=1
= crc=1 finobt=1, sparse=1, rmapbt=1
= reflink=1 bigtime=1 inobtcount=1 nrext64=1
data = bsize=4096 blocks=130816, imaxpct=25
= sunit=32 swidth=128 blks
naming =version 2 bsize=4096 ascii-ci=0, ftype=1
log =internal log bsize=4096 blocks=8192, version=2
= sectsz=512 sunit=32 blks, lazy-count=1
realtime =none extsz=4096 blocks=0, rtextents=0
= rgcount=0 rgsize=0 blks
Discarding blocks...Done.
# xfs_repair -n /dev/sda
Phase 1 - find and verify superblock...
- reporting progress in intervals of 15 minutes
Phase 2 - using internal log
- zero log...
- 16:30:50: zeroing log - 16320 of 16320 blocks done
- scan filesystem freespace and inode maps...
agf_freeblks 25, counted 0 in ag 4
sb_fdblocks 8823, counted 8798
The root cause of this problem is the numrecs handling in
xfs_freesp_init_recs, which is used to initialize a new AG. Prior to
calling the function, we set up the new bnobt block with numrecs == 1
and rely on _freesp_init_recs to format that new record. If the last
record created has a blockcount of zero, then it sets numrecs = 0.
That last bit isn't correct if the AG contains the log, the start of the
log is not immediately after the initial blocks due to stripe alignment,
and the end of the log is perfectly aligned with the end of the AG. For
this case, we actually formatted a single bnobt record to handle the
free space before the start of the (stripe aligned) log, and incremented
arec to try to format a second record. That second record turned out to
be unnecessary, so what we really want is to leave numrecs at 1.
The numrecs handling itself is overly complicated because a different
function sets numrecs == 1. Change the bnobt creation code to start
with numrecs set to zero and only increment it after successfully
formatting a free space extent into the btree block.
Fixes:
|
||
|
Darrick J. Wong
|
b82a5c42a5 |
xfs: don't unconditionally null args->pag in xfs_bmap_btalloc_at_eof
xfs/170 on a filesystem with su=128k,sw=4 produces this splat:
BUG: kernel NULL pointer dereference, address: 0000000000000010
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 0 P4D 0
Oops: 0002 [#1] PREEMPT SMP
CPU: 1 PID: 4022907 Comm: dd Tainted: G W 6.3.0-xfsx #2 6ebeeffbe9577d32
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20171121_152543-x86-ol7-bu
RIP: 0010:xfs_perag_rele+0x10/0x70 [xfs]
RSP: 0018:ffffc90001e43858 EFLAGS: 00010217
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000100
RDX: ffffffffa054e717 RSI: 0000000000000005 RDI: 0000000000000000
RBP: ffff888194eea000 R08: 0000000000000000 R09: 0000000000000037
R10: ffff888100ac1cb0 R11: 0000000000000018 R12: 0000000000000000
R13: ffffc90001e43a38 R14: ffff888194eea000 R15: ffff888194eea000
FS: 00007f93d1a0e740(0000) GS:ffff88843fc80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000010 CR3: 000000018a34f000 CR4: 00000000003506e0
Call Trace:
<TASK>
xfs_bmap_btalloc+0x1a7/0x5d0 [xfs f85291d6841cbb3dc740083f1f331c0327394518]
xfs_bmapi_allocate+0xee/0x470 [xfs f85291d6841cbb3dc740083f1f331c0327394518]
xfs_bmapi_write+0x539/0x9e0 [xfs f85291d6841cbb3dc740083f1f331c0327394518]
xfs_iomap_write_direct+0x1bb/0x2b0 [xfs f85291d6841cbb3dc740083f1f331c0327394518]
xfs_direct_write_iomap_begin+0x51c/0x710 [xfs f85291d6841cbb3dc740083f1f331c0327394518]
iomap_iter+0x132/0x2f0
__iomap_dio_rw+0x2f8/0x840
iomap_dio_rw+0xe/0x30
xfs_file_dio_write_aligned+0xad/0x180 [xfs f85291d6841cbb3dc740083f1f331c0327394518]
xfs_file_write_iter+0xfb/0x190 [xfs f85291d6841cbb3dc740083f1f331c0327394518]
vfs_write+0x2eb/0x410
ksys_write+0x65/0xe0
do_syscall_64+0x2b/0x80
This crash occurs under the "out_low_space" label. We grabbed a perag
reference, passed it via args->pag into xfs_bmap_btalloc_at_eof, and
afterwards args->pag is NULL. Fix the second function not to clobber
args->pag if the caller had passed one in.
Fixes:
|
||
|
Linus Torvalds
|
06936aaf49 |
Some ext4 regression and bug fixes for -rc1
-----BEGIN PGP SIGNATURE----- iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmROracACgkQ8vlZVpUN gaPqLQf/ZvzvspL4o3SNsHE/M2tKNBVY/z/vsfmAZwMgrGoK5qCkDsNA7c7+oUwE xjiHiVHOaYjJVWwkdODAwe7xNbWB6FoKptBaBi89fAyibMY/N7BZ8rad69NQTvyc JbKjorvEBc+qgsUEt2+ZpMogN9KHlVh3NJwlovesmucQtg2gWLKs8wrxW2bC7uAh 2uR9GWUnhDrs6jHbjHkG3/lgB0aS0StLRxfsbchjZvCsniTDZymLmmgkA1ln17ce 6iRg2ESjYUryPX09YFtUuQVvObtUTM+z8DzwyQuAJ4VfmdoPA4L6mpdqzPGFuKQc gJrLSB8VZJDvPoGjaHZ+Qdl1tHlFRw== =2SEf -----END PGP SIGNATURE----- Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 fixes from Ted Ts'o: "Some ext4 regression and bug fixes" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: clean up error handling in __ext4_fill_super() ext4: reflect error codes from ext4_multi_mount_protect() to its callers ext4: fix lost error code reporting in __ext4_fill_super() ext4: fix unused iterator variable warnings ext4: fix use-after-free read in ext4_find_extent for bigalloc + inline ext4: fix i_disksize exceeding i_size problem in paritally written case |
||
|
Linus Torvalds
|
26c009dffc |
11 smb3 client fixes, mostly cleanup
-----BEGIN PGP SIGNATURE----- iQGzBAABCgAdFiEE6fsu8pdIjtWE/DpLiiy9cAdyT1EFAmROg4sACgkQiiy9cAdy T1FeNgv/S/dFaQ9RXDGp0AsO9aDUwKPMZWdZVgPtnktQF5icTI7CrYn3R2KrA6i2 +a27pSWsefF1/RpRIGm5n0AFkEgRaClqxWIzM7VBXWtsR5oFA5GoyYzOk206qAvl CTvpS7Kuf091UG8NoOVqmM+AtSE8tEx4itDbh7wS9HeApoxiZKPJvblzaiCAzEeR mc+ehfTocUy+1UZh8xZB/epl0xHAVUr845zIkVZXE2HBQCSni/5ywPIHc3xyAQXJ 6a5sEYi0e3wQ9457zS6POW3rMXys2ZanYlEfy6guGcfCAX6PsPt5Yl+sJtdMw08k XB9qJkGg111kLKncM38Ju5R1QHYCOj/tOC7gjleNhHWs/iHclMFrDrA/ZYSzibd4 USVQpLRCjFFAwvKj/LTVmPIRw60fr3lf4n4maQGLqJCHXQkO/+Z4q/UEBqslXrot Y1c4+ALqJRQvMe591hCsN/uDV7S9ETy2BRePBbLyokcwji8i9PyJ+4XYONmngVyx OuB2KeAE =4iMh -----END PGP SIGNATURE----- Merge tag '6.4-rc-smb3-client-fixes-part1' of git://git.samba.org/sfrench/cifs-2.6 Pull cifs fixes from Steve French: - deferred close fix for an important case when cached file should be closed immediately - two fixes for missing locks - eight minor cleanup * tag '6.4-rc-smb3-client-fixes-part1' of git://git.samba.org/sfrench/cifs-2.6: cifs: update internal module version number for cifs.ko smb3: move some common open context structs to smbfs_common smb3: make query_on_disk_id open context consistent and move to common code SMB3.1.1: add new tree connect ShareFlags cifs: missing lock when updating session status SMB3: Close deferred file handles in case of handle lease break SMB3: Add missing locks to protect deferred close file list cifs: Avoid a cast in add_lease_context() cifs: Simplify SMB2_open_init() cifs: Simplify SMB2_open_init() cifs: Simplify SMB2_open_init() |
||
|
David Howells
|
db099c625b |
rxrpc: Fix timeout of a call that hasn't yet been granted a channel
afs_make_call() calls rxrpc_kernel_begin_call() to begin a call (which may
get stalled in the background waiting for a connection to become
available); it then calls rxrpc_kernel_set_max_life() to set the timeouts -
but that starts the call timer so the call timer might then expire before
we get a connection assigned - leading to the following oops if the call
stalled:
BUG: kernel NULL pointer dereference, address: 0000000000000000
...
CPU: 1 PID: 5111 Comm: krxrpcio/0 Not tainted 6.3.0-rc7-build3+ #701
RIP: 0010:rxrpc_alloc_txbuf+0xc0/0x157
...
Call Trace:
<TASK>
rxrpc_send_ACK+0x50/0x13b
rxrpc_input_call_event+0x16a/0x67d
rxrpc_io_thread+0x1b6/0x45f
? _raw_spin_unlock_irqrestore+0x1f/0x35
? rxrpc_input_packet+0x519/0x519
kthread+0xe7/0xef
? kthread_complete_and_exit+0x1b/0x1b
ret_from_fork+0x22/0x30
Fix this by noting the timeouts in struct rxrpc_call when the call is
created. The timer will be started when the first packet is transmitted.
It shouldn't be possible to trigger this directly from userspace through
AF_RXRPC as sendmsg() will return EBUSY if the call is in the
waiting-for-conn state if it dropped out of the wait due to a signal.
Fixes:
|
||
Christophe JAILLET
|
db2993a423 |
ceph: reorder fields in 'struct ceph_snapid_map'
Group some variables based on their sizes to reduce holes. On x86_64, this shrinks the size of 'struct ceph_snapid_map' from 72 to 64 bytes. When such a structure is allocated, because of the way memory allocation works, when 72 bytes were requested, 96 bytes were allocated. So, on x86_64, this change saves 32 bytes per allocation and has the structure fit in a single cacheline. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> |
||
Xiubo Li
|
a5ffd7b6e9 |
ceph: pass ino# instead of old_dentry if it's disconnected
When exporting the kceph to NFS it may pass a DCACHE_DISCONNECTED dentry for the link operation. Then it will parse this dentry as a snapdir, and the mds will fail the link request as -EROFS. MDS allow clients to pass a ino# instead of a path. Link: https://tracker.ceph.com/issues/59515 Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> |
||
|
Xiubo Li
|
aaf67de788 |
ceph: fix potential use-after-free bug when trimming caps
When trimming the caps and just after the 'session->s_cap_lock' is released in ceph_iterate_session_caps() the cap maybe removed by another thread, and when using the stale cap memory in the callbacks it will trigger use-after-free crash. We need to check the existence of the cap just after the 'ci->i_ceph_lock' being acquired. And do nothing if it's already removed. Cc: stable@vger.kernel.org Link: https://tracker.ceph.com/issues/43272 Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Luís Henriques <lhenriques@suse.de> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> |
||
|
Xiubo Li
|
7d41870d65 |
ceph: implement writeback livelock avoidance using page tagging
While the mapped IOs continue if we try to flush a file's buffer
we can see that the fsync() won't complete until the IOs finish.
This is analogous to Jan Kara's commit (
|
||
|
Xiubo Li
|
7a6c3a035a |
ceph: do not print the whole xattr value if it's too long
If the xattr's value size is long enough the kernel will warn and then will fail the xfstests test case. Just print part of the value string if it's too long. At the same time fix the function name issue in the debug logs. Link: https://tracker.ceph.com/issues/58404 Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> |
||
|
Linus Torvalds
|
1ae78a1451 |
five ksmbd server fixes, and new lock_rename_child VFS helper routine
-----BEGIN PGP SIGNATURE----- iQGzBAABCgAdFiEE6fsu8pdIjtWE/DpLiiy9cAdyT1EFAmRJ1QwACgkQiiy9cAdy T1FoMwv/dQv3nlq7CFW/p82xRGQg1rqE/bLw8iAz2kl2QMNI32mnNZ5vsnAOx5CT CXUsdfQTgVsdKQ0yAV0WIAopxOxf4ASmKn8Ej1wJBEREFuwqQUgFE16DALKDPhcW 77cuPqFEGD1CfbOvM+IjSN1OlDmsu2a3qSuD1OfTxC14s3+mPZitGpSm06PMsaT6 C17RG6dC+PJmzXOT79OGfPmP1e6103abhv7PUdy7tZdiHi3I2ESXvCUGAoeFzjG9 i4vxM+WdfStun0sXkZysS+iiyajfbFF8cOkaXp4QG+aplDD5Z2gjV6w+n3phegiX N1QvTZ3C8dQEhvmy40DGyLgj2A3/dFqh5bEfA3Mtni2NqEHKG4ng2dQsmkMiNg0M iuCHwLUz2kgvc+zl4+HJpKDVF0HG3RHAlzRq0oNEw+lQApzfg/Q+p5ZcZUBjcoSj n4fxxNO4bggHmCBHZNDL7VNG81m0YEg8xnDpBPvwtLMO1yEj8RFwW+RTfIwqyOYE VK1dcRc1 =DweL -----END PGP SIGNATURE----- Merge tag '6.4-rc-ksmbd-server-fixes' of git://git.samba.org/ksmbd Pull ksmbd server updates from Steve French: - SMB3.1.1 negotiate context fixes and cleanup - new lock_rename_child VFS helper - ksmbd fix to avoid unlink race and to use the new VFS helper to avoid rename race * tag '6.4-rc-ksmbd-server-fixes' of git://git.samba.org/ksmbd: ksmbd: fix racy issue from using ->d_parent and ->d_name ksmbd: remove unused compression negotiate ctx packing ksmbd: avoid duplicate negotiate ctx offset increments ksmbd: set NegotiateContextCount once instead of every inc fs: introduce lock_rename_child() helper ksmbd: remove internal.h include |
||
|
Linus Torvalds
|
4e1c80ae5c |
NFSD 6.4 Release Notes
The big ticket item for this release is support for RPC-with-TLS [RFC 9289] has been added to the Linux NFS server. The goal is to provide a simple-to-deploy, low-overhead in-transit confidentiality and peer authentication mechanism. It can supplement NFS Kerberos and it can protect the use of legacy non-cryptographic user authentication flavors such as AUTH_SYS. The TLS Record protocol is handled entirely by kTLS, meaning it can use either software encryption or offload encryption to smart NICs. Work continues on improving NFSD's open file cache. Among the many clean-ups in that area is a patch to convert the rhashtable to use the list-hashing version of that data structure. -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEKLLlsBKG3yQ88j7+M2qzM29mf5cFAmRK/JMACgkQM2qzM29m f5cF5A/+JZFRSPlfSYt0YHzUQQSDdYn5n/IG9TwJQd62xheu083WuKRaCOYYoOhg 06nZd6p7nuF1E0n2ZWOKSE6YkBSE6z4M6KrQlm6lCe/nmxYCR87IYfJCXuL+Yf0e /LdL4OTvDHzY5ec1DreERldPIUJ8GFzwChH8/z4XwbNDR7qJkF/gf8YxpFr+8K+j Cfyl8woZiEze/Nvxy1YtAqa7HMEpitt0aWJN55rHwTh9c3b0nmDzziYFcVqXgybJ /qUHfHBak66ll8RqhcQ3BMuyfszwASERbPsaZ2a5F/RaxLL5ZWfFyhgQwm+PZWT+ J5DdSBwLEQYtKQGD41A1aorP6v/u2QelfWrl4S7/qjRpREp8Ba2IU4fYLjGb1499 Imk68BA7NwFp87tdMi/7en1VVgina4U/S3X71aUYWe+C0g48BfTrVwq4SVbQSAo4 1638vbZnrJbsJMr9OaaysKWfv4KZB020Ji1KVwuqmgy5F8kdfJCCQ2UR/fHuJ3DY R0Zrd1Ryjwr83viP+Xj0ERiW405gPdCT0RJqoA7rznRPCqT5M42tf5z65uO7iZeE C1udgDaoQOtioKlem6FcDXLkryf986slGA7V91lat/Jt8A5jLKQfjVe3Q+kaaqXP ka1DQnYelzMzILQQs39cqW5pShrH8e3tfRZ7JhdBgrpxVXz9ZZM= =lA2+ -----END PGP SIGNATURE----- Merge tag 'nfsd-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux Pull nfsd updates from Chuck Lever: "The big ticket item for this release is that support for RPC-with-TLS [RFC 9289] has been added to the Linux NFS server. The goal is to provide a simple-to-deploy, low-overhead in-transit confidentiality and peer authentication mechanism. It can supplement NFS Kerberos and it can protect the use of legacy non-cryptographic user authentication flavors such as AUTH_SYS. The TLS Record protocol is handled entirely by kTLS, meaning it can use either software encryption or offload encryption to smart NICs. Aside from that, work continues on improving NFSD's open file cache. Among the many clean-ups in that area is a patch to convert the rhashtable to use the list-hashing version of that data structure" * tag 'nfsd-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (31 commits) NFSD: Handle new xprtsec= export option SUNRPC: Support TLS handshake in the server-side TCP socket code NFSD: Clean up xattr memory allocation flags NFSD: Fix problem of COMMIT and NFS4ERR_DELAY in infinite loop SUNRPC: Clear rq_xid when receiving a new RPC Call SUNRPC: Recognize control messages in server-side TCP socket code SUNRPC: Be even lazier about releasing pages SUNRPC: Convert svc_xprt_release() to the release_pages() API SUNRPC: Relocate svc_free_res_pages() nfsd: simplify the delayed disposal list code SUNRPC: Ignore return value of ->xpo_sendto SUNRPC: Ensure server-side sockets have a sock->file NFSD: Watch for rq_pages bounds checking errors in nfsd_splice_actor() sunrpc: simplify two-level sysctl registration for svcrdma_parm_table SUNRPC: return proper error from get_expiry() lockd: add some client-side tracepoints nfs: move nfs_fhandle_hash to common include file lockd: server should unlock lock if client rejects the grant lockd: fix races in client GRANTED_MSG wait logic lockd: move struct nlm_wait to lockd.h ... |
||
|
Linus Torvalds
|
0127f25b5d |
NFS Client Updates for Linux 6.4
New Features: * Convert the readdir path to use folios * Convert the NFS fscache code to use netfs Bugfixes and Cleanups: * Always send a RECLAIM_COMPLETE after establishing a lease * Simplify sysctl registrations and other cleanups * Handle out-of-order write replies on NFS v3 * Have sunrpc call_bind_status use standard hard/soft task semantics * Other minor cleanups -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEnZ5MQTpR7cLU7KEp18tUv7ClQOsFAmRMI04ACgkQ18tUv7Cl QOuCNQ//SkQm8aOM4DkYFeDIObye6xMzgtWrB25grYNG4a/DcYqb5kNcbmI5l1tE Tus8KMZAWSpwa0m8ALctzp+pZQWQkY/svsqqHrKIGUHBI8F0OinVCqc2MzNN75WX m/1wELW6ek9RBL5BoJtAPt+Qu8/jP6KD64Zot7snBeUrzreaZDcz0HM+EcQhi7X7 qd5XS0/cA2eLEBBQcQdFpRhHvgW12BMYM/zp3/ER5H52L2iAlZunGWw+Nqs8ueOR D7K2+CF1sV1k6hYbLWNoaF2J6PZr5dRpc6gSq4fLP4WUKjqQwmQp8cm9iLpf6jGa a+Y7t8aj7vup8jVCVGWYWZA2G2gi6jWmxxWudkJwfAa1E45t1B4/C0udwlxR20OO XI2Bhe5YwTURgSOvOS9QTZJpQN4qfpEL0NoAmAT5fAHBQ2CXDrMlSIxPS7U6LO9q YqwIHcAHvYVnbD45IUh2Zjbp65mRb1VkU6WzOyK1/sNHEyYpubIWXB/yLaA3oGge V3xUgvlTzLVzzyQfwiRfzAD1P5/USaXE/B36c4itfCr5rJnAfsiBP3gk0o9yq18J 3Yb6olrmc9CzeA7PN88uEus4VZHbaE9OktRFIjJ22jlLQEY4xougdE5asY1XX8F+ OKLLLeeCrsbvrANB9XcLVsLqdMYvsd0VaCX9HtN3UP+7Lod5T10= =gpBC -----END PGP SIGNATURE----- Merge tag 'nfs-for-6.4-1' of git://git.linux-nfs.org/projects/anna/linux-nfs Pull NFS client updates from Anna Schumaker: "New Features: - Convert the readdir path to use folios - Convert the NFS fscache code to use netfs Bugfixes and Cleanups: - Always send a RECLAIM_COMPLETE after establishing a lease - Simplify sysctl registrations and other cleanups - Handle out-of-order write replies on NFS v3 - Have sunrpc call_bind_status use standard hard/soft task semantics - Other minor cleanups" * tag 'nfs-for-6.4-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: NFSv4.2: Rework scratch handling for READ_PLUS NFS: Cleanup unused rpc_clnt variable NFS: set varaiable nfs_netfs_debug_id storage-class-specifier to static SUNRPC: remove the maximum number of retries in call_bind_status NFS: Convert readdir page array functions to use a folio NFS: Convert the readdir array-of-pages into an array-of-folios NFSv3: handle out-of-order write replies. NFS: Remove fscache specific trace points and NFS_INO_FSCACHE bit NFS: Remove all NFSIOS_FSCACHE counters due to conversion to netfs API NFS: Convert buffered read paths to use netfs when fscache is enabled NFS: Configure support for netfs when NFS fscache is configured NFS: Rename readpage_async_filler to nfs_read_add_folio sunrpc: simplify one-level sysctl registration for debug_table sunrpc: move sunrpc_table and proc routines above sunrpc: simplify one-level sysctl registration for xs_tunables_table sunrpc: simplify one-level sysctl registration for xr_tunables_table nfs: simplify two-level sysctl registration for nfs_cb_sysctls nfs: simplify two-level sysctl registration for nfs4_cb_sysctls lockd: simplify two-level sysctl registration for nlm_sysctls NFSv4.1: Always send a RECLAIM_COMPLETE after establishing lease |
||
|
Linus Torvalds
|
1e098dec61 |
driver ntfs3 for linux 6.4
-----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEh0DEKNP0I9IjwfWEqbAzH4MkB7YFAmRLZc0ACgkQqbAzH4Mk B7YWkA/+JHsryYjInVGmYfQ4oCmq1F2cEDgKdTeths+IZ+2vbk03hUbvmLBg8YR3 VvYZ2YqNAs9HuZxP6mnVZB9YOMIFEdV3Pyto68l9jwip4irpjVrABtxwn6udTAmx RXVDDLRxN53UyoWgRoOfAEJUXfmOvw7laj8T9PrsKxXKhlOKmK8mSKtq8xTt+ECo 8cJ0Nw2d0TVY6+Ou6CCfH8CzHtQjInHnKSt/KynJ+OJHxLmHRGlbDJbyjuJU0OBr grXngKPmqvHTiO3Zs14gRv5tFXNMGdvRcomy/XnztD/nIC2jEODI2uUCSedEh5vf IpzjKwQF1qRseGHwr2U0THPHOso4IP2T79WRQEuLY8DUGJClIGGmcdfeBqNnjbey 1GVUis/leBvQb1CMAkX5HjGXO9i6xEfuTxwHSlk+Wu8euEDQ8OWudyeQmOYiHnqS vKZxXY88DDjATSokSUSSb8IW63z+JEPmovsmLKLpWusvWikIKhIEnjRZUG5XhgS3 Ux66Owt9yguKgVAPX66b9PGQx4wy3GAR6FRxG1BpDX0XooGbzGRTAn213sjkBKiV JLswbQTJ5LOXv8bS1srNMPhQFeqFcEgrDbC+WxmOpzTvutimYmzUTDrOPq92Xw0f oi/i5kCoPFmOfoRsLhIl+lft1XLZ5iYFvj0faDJ5AWUOjb73Z3s= =xlIh -----END PGP SIGNATURE----- Merge tag 'ntfs3_for_6.4' of https://github.com/Paragon-Software-Group/linux-ntfs3 Pull ntfs3 updates from Konstantin Komarov: "New code: - add missed "nocase" in ntfs_show_options - extend information on failures/errors - small optimizations Fixes: - some logic errors - some dead code was removed - code is refactored and reformatted according to the new version of clang-format Code removal: - 'noacsrules' option. Currently, this option does not work properly, and its use leads to unstable results. If we figure out how to implement it without errors, we will add it later - writepage" * tag 'ntfs3_for_6.4' of https://github.com/Paragon-Software-Group/linux-ntfs3: (30 commits) fs/ntfs3: Fix root inode checking fs/ntfs3: Print details about mount fails fs/ntfs3: Add missed "nocase" in ntfs_show_options fs/ntfs3: Code formatting and refactoring fs/ntfs3: Changed ntfs_get_acl() to use dentry fs/ntfs3: Remove field sbi->used.bitmap.set_tail fs/ntfs3: Undo critial modificatins to keep directory consistency fs/ntfs3: Undo endian changes fs/ntfs3: Optimization in ntfs_set_state() fs/ntfs3: Fix ntfs_create_inode() fs/ntfs3: Remove noacsrules fs/ntfs3: Use bh_read to simplify code fs/ntfs3: Fix a possible null-pointer dereference in ni_clear() fs/ntfs3: Refactoring of various minor issues fs/ntfs3: Restore overflow checking for attr size in mi_enum_attr fs/ntfs3: Check for extremely large size of $AttrDef fs/ntfs3: Improved checking of attribute's name length fs/ntfs3: Add null pointer checks fs/ntfs3: fix spelling mistake "attibute" -> "attribute" fs/ntfs3: Add length check in indx_get_root ... |
||
|
Linus Torvalds
|
56c455b38d |
xfs: New code for 6.4
o Added detailed design documentation for the upcoming online repair feature
o major update to online scrub to complete the reverse mapping cross-referencing
infrastructure enabling us to fully validate allocated metadata against owner
records. This is the last piece of scrub infrastructure needed before we can
start merging online repair functionality.
o Fixes for the ascii-ci hashing issues
o deprecation of the ascii-ci functionality
o on-disk format verification bug fixes
o various random bug fixes for syzbot and other bug reports
Signed-off-by: Dave Chinner <david@fromorbit.com>
-----BEGIN PGP SIGNATURE-----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=lBJy
-----END PGP SIGNATURE-----
Merge tag 'xfs-6.4-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs updates from Dave Chinner:
"This consists mainly of online scrub functionality and the design
documentation for the upcoming online repair functionality built on
top of the scrub code:
- Added detailed design documentation for the upcoming online repair
feature
- major update to online scrub to complete the reverse mapping
cross-referencing infrastructure enabling us to fully validate
allocated metadata against owner records. This is the last piece of
scrub infrastructure needed before we can start merging online
repair functionality.
- Fixes for the ascii-ci hashing issues
- deprecation of the ascii-ci functionality
- on-disk format verification bug fixes
- various random bug fixes for syzbot and other bug reports"
* tag 'xfs-6.4-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (107 commits)
xfs: fix livelock in delayed allocation at ENOSPC
xfs: Extend table marker on deprecated mount options table
xfs: fix duplicate includes
xfs: fix BUG_ON in xfs_getbmap()
xfs: verify buffer contents when we skip log replay
xfs: _{attr,data}_map_shared should take ILOCK_EXCL until iread_extents is completely done
xfs: remove WARN when dquot cache insertion fails
xfs: don't consider future format versions valid
xfs: deprecate the ascii-ci feature
xfs: test the ascii case-insensitive hash
xfs: stabilize the dirent name transformation function used for ascii-ci dir hash computation
xfs: cross-reference rmap records with refcount btrees
xfs: cross-reference rmap records with inode btrees
xfs: cross-reference rmap records with free space btrees
xfs: cross-reference rmap records with ag btrees
xfs: introduce bitmap type for AG blocks
xfs: convert xbitmap to interval tree
xfs: drop the _safe behavior from the xbitmap foreach macro
xfs: don't load local xattr values during scrub
xfs: remove the for_each_xbitmap_ helpers
...
|
||
|
Linus Torvalds
|
bedf149527 |
New code for 6.4:
* Remove an unused symbol. * Add tracepoints for the directio code. Signed-off-by: Darrick J. Wong <djwong@kernel.org> -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZEKzuQAKCRBKO3ySh0YR pothAQD9sBm7//+vYXxQXPlmX09Jvxixnlwyth+PvUI2Al3mrgEA0h1ZSRhxBbxx QiIFXCQYckb9GTIcRd67lCp1j/Ie/g0= =vGbm -----END PGP SIGNATURE----- Merge tag 'iomap-6.4-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux Pull iomap updates from Darrick Wong: "The only changes for this cycle are the addition of tracepoints to the iomap directio code so that Ritesh (who is working on porting ext2 to iomap) can observe the io flows more easily. Summary: - Remove an unused symbol - Add tracepoints for the directio code" * tag 'iomap-6.4-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: iomap: Add DIO tracepoints iomap: Remove IOMAP_DIO_NOSYNC unused dio flag fs.h: Add TRACE_IOCB_STRINGS for use in trace points |
||
|
Steve French
|
9be11a6931 |
cifs: update internal module version number for cifs.ko
From 2.42 to 2.43 Signed-off-by: Steve French <stfrench@microsoft.com> |
||
|
Steve French
|
2fe187dca6 |
smb3: move some common open context structs to smbfs_common
create durable and create durable reconnect context and the maximal access create context struct definitions can be put in common code in smbfs_common Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com> Signed-off-by: Steve French <stfrench@microsoft.com> |
||
|
Steve French
|
1149c8467d |
smb3: make query_on_disk_id open context consistent and move to common code
cifs and ksmbd were using a slightly different version of the query_on_disk_id struct which could be confusing. Use the ksmbd version of this struct, and move it to common code. Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com> Signed-off-by: Steve French <stfrench@microsoft.com> |
||
|
Steve French
|
c09ba02cfa |
SMB3.1.1: add new tree connect ShareFlags
Also update these flag names in a few places to match the simpler easier to understand names now used in the protocol documentation (see MS-SMB2 section 2.2.10) Acked-by: Bharath SM <bharathsm@microsoft.com> Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com> Signed-off-by: Steve French <stfrench@microsoft.com> |
||
|
Steve French
|
943fb67b09 |
cifs: missing lock when updating session status
Coverity noted a place where we were not grabbing
the ses_lock when setting (and checking) ses_status.
Addresses-Coverity: 1536833 ("Data race condition (MISSING_LOCK)")
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Reviewed-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
||
|
Linus Torvalds
|
d579c468d7 |
tracing updates for 6.4:
- User events are finally ready!
After lots of collaboration between various parties, we finally locked
down on a stable interface for user events that can also work with user
space only tracing. This is implemented by telling the kernel (or user
space library, but that part is user space only and not part of this
patch set), where the variable is that the application uses to know if
something is listening to the trace. There's also an interface to tell
the kernel about these events, which will show up in the
/sys/kernel/tracing/events/user_events/ directory, where it can be
enabled. When it's enabled, the kernel will update the variable, to tell
the application to start writing to the kernel.
See https://lwn.net/Articles/927595/
- Cleaned up the direct trampolines code to simplify arm64 addition of
direct trampolines. Direct trampolines use the ftrace interface but
instead of jumping to the ftrace trampoline, applications (mostly BPF)
can register their own trampoline for performance reasons.
- Some updates to the fprobe infrastructure. fprobes are more efficient than
kprobes, as it does not need to save all the registers that kprobes on
ftrace do. More work needs to be done before the fprobes will be exposed
as dynamic events.
- More updates to references to the obsolete path of
/sys/kernel/debug/tracing for the new /sys/kernel/tracing path.
- Add a seq_buf_do_printk() helper to seq_bufs, to print a large buffer line
by line instead of all at once. There's users in production kernels that
have a large data dump that originally used printk() directly, but the
data dump was larger than what printk() allowed as a single print.
Using seq_buf() to do the printing fixes that.
- Add /sys/kernel/tracing/touched_functions that shows all functions that
was every traced by ftrace or a direct trampoline. This is used for
debugging issues where a traced function could have caused a crash by
a bpf program or live patching.
- Add a "fields" option that is similar to "raw" but outputs the fields of
the events. It's easier to read by humans.
- Some minor fixes and clean ups.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZEr36xQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6quZHAQCzuqnn2S8DsPd3Sy1vKIYaj0uajW5D
Kz1oUJH4F0H7kgEA8XwXkdtfKpOXWc/ZH4LWfL7Orx2wJZJQMV9dVqEPDAE=
=w0Z1
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
- User events are finally ready!
After lots of collaboration between various parties, we finally
locked down on a stable interface for user events that can also work
with user space only tracing.
This is implemented by telling the kernel (or user space library, but
that part is user space only and not part of this patch set), where
the variable is that the application uses to know if something is
listening to the trace.
There's also an interface to tell the kernel about these events,
which will show up in the /sys/kernel/tracing/events/user_events/
directory, where it can be enabled.
When it's enabled, the kernel will update the variable, to tell the
application to start writing to the kernel.
See https://lwn.net/Articles/927595/
- Cleaned up the direct trampolines code to simplify arm64 addition of
direct trampolines.
Direct trampolines use the ftrace interface but instead of jumping to
the ftrace trampoline, applications (mostly BPF) can register their
own trampoline for performance reasons.
- Some updates to the fprobe infrastructure. fprobes are more efficient
than kprobes, as it does not need to save all the registers that
kprobes on ftrace do. More work needs to be done before the fprobes
will be exposed as dynamic events.
- More updates to references to the obsolete path of
/sys/kernel/debug/tracing for the new /sys/kernel/tracing path.
- Add a seq_buf_do_printk() helper to seq_bufs, to print a large buffer
line by line instead of all at once.
There are users in production kernels that have a large data dump
that originally used printk() directly, but the data dump was larger
than what printk() allowed as a single print.
Using seq_buf() to do the printing fixes that.
- Add /sys/kernel/tracing/touched_functions that shows all functions
that was every traced by ftrace or a direct trampoline. This is used
for debugging issues where a traced function could have caused a
crash by a bpf program or live patching.
- Add a "fields" option that is similar to "raw" but outputs the fields
of the events. It's easier to read by humans.
- Some minor fixes and clean ups.
* tag 'trace-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (41 commits)
ring-buffer: Sync IRQ works before buffer destruction
tracing: Add missing spaces in trace_print_hex_seq()
ring-buffer: Ensure proper resetting of atomic variables in ring_buffer_reset_online_cpus
recordmcount: Fix memory leaks in the uwrite function
tracing/user_events: Limit max fault-in attempts
tracing/user_events: Prevent same address and bit per process
tracing/user_events: Ensure bit is cleared on unregister
tracing/user_events: Ensure write index cannot be negative
seq_buf: Add seq_buf_do_printk() helper
tracing: Fix print_fields() for __dyn_loc/__rel_loc
tracing/user_events: Set event filter_type from type
ring-buffer: Clearly check null ptr returned by rb_set_head_page()
tracing: Unbreak user events
tracing/user_events: Use print_format_fields() for trace output
tracing/user_events: Align structs with tabs for readability
tracing/user_events: Limit global user_event count
tracing/user_events: Charge event allocs to cgroups
tracing/user_events: Update documentation for ABI
tracing/user_events: Use write ABI in example
tracing/user_events: Add ABI self-test
...
|
||
Anna Schumaker
|
fbd2a05f29 |
NFSv4.2: Rework scratch handling for READ_PLUS
Instead of using a tiny, static scratch buffer, we should use a kmalloc()-ed buffer that is allocated when checking for read plus usage. This lets us use the buffer before decoding any part of the READ_PLUS operation instead of setting it right before segment decoding, meaning it should be a little more robust. Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> |
||
Eric Van Hensbergen
|
21e26d5e54
|
fs/9p: Fix bit operation logic error
This re-introduces a fix that somehow got dropped during rebase of the current series in for-next. When writeback is enabled, opens are forced to support both read and write operations but with the logic error other flags may be dropped unintentionaly. Reported-by: Christophe Jaillet <christophe.jaillet@wanadoo.fr> Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org> |
||
Theodore Ts'o
|
d4fab7b28e |
ext4: clean up error handling in __ext4_fill_super()
There were two ways to return an error code; one was via setting the 'err' variable, and the second, if err was zero, was via the 'ret' variable. This was both confusing and fragile, and when code was factored out of __ext4_fill_super(), some of the error codes returned by the original code was replaced by -EINVAL, and in one case, the error code was placed by 0, triggering a kernel null pointer dereference. Clean this up by removing the 'ret' variable, leaving only one way to set the error code to be returned, and restore the errno codes that were returned via the the mount system call as they were before we started refactoring __ext4_fill_super(). Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jason Yan <yanaijie@huawei.com> |
||
|
Theodore Ts'o
|
3b50d5018e |
ext4: reflect error codes from ext4_multi_mount_protect() to its callers
This will allow more fine-grained errno codes to be returned by the mount system call. Cc: Andreas Dilger <adilger.kernel@dilger.ca> Signed-off-by: Theodore Ts'o <tytso@mit.edu> |
||
|
Theodore Ts'o
|
d5e72c4e32 |
ext4: fix lost error code reporting in __ext4_fill_super()
When code was factored out of __ext4_fill_super() into
ext4_percpu_param_init() the error return was discarded. This meant
that it was possible for __ext4_fill_super() to return zero,
indicating success, without the struct super getting completely filled
in, leading to a potential NULL pointer dereference.
Reported-by: syzbot+bbf0f9a213c94f283a5c@syzkaller.appspotmail.com
Fixes:
|
||
Nathan Chancellor
|
856dd6c598 |
ext4: fix unused iterator variable warnings
When CONFIG_QUOTA is disabled, there are warnings around unused iterator
variables:
fs/ext4/super.c: In function 'ext4_put_super':
fs/ext4/super.c:1262:13: error: unused variable 'i' [-Werror=unused-variable]
1262 | int i, err;
| ^
fs/ext4/super.c: In function '__ext4_fill_super':
fs/ext4/super.c:5200:22: error: unused variable 'i' [-Werror=unused-variable]
5200 | unsigned int i;
| ^
cc1: all warnings being treated as errors
The kernel has updated to GNU11, allowing the variables to be declared
within the for loop. Do so to clear up the warnings.
Fixes:
|
||
Ye Bin
|
835659598c |
ext4: fix use-after-free read in ext4_find_extent for bigalloc + inline
Syzbot found the following issue: loop0: detected capacity change from 0 to 2048 EXT4-fs (loop0): mounted filesystem 00000000-0000-0000-0000-000000000000 without journal. Quota mode: none. ================================================================== BUG: KASAN: use-after-free in ext4_ext_binsearch_idx fs/ext4/extents.c:768 [inline] BUG: KASAN: use-after-free in ext4_find_extent+0x76e/0xd90 fs/ext4/extents.c:931 Read of size 4 at addr ffff888073644750 by task syz-executor420/5067 CPU: 0 PID: 5067 Comm: syz-executor420 Not tainted 6.2.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1b1/0x290 lib/dump_stack.c:106 print_address_description+0x74/0x340 mm/kasan/report.c:306 print_report+0x107/0x1f0 mm/kasan/report.c:417 kasan_report+0xcd/0x100 mm/kasan/report.c:517 ext4_ext_binsearch_idx fs/ext4/extents.c:768 [inline] ext4_find_extent+0x76e/0xd90 fs/ext4/extents.c:931 ext4_clu_mapped+0x117/0x970 fs/ext4/extents.c:5809 ext4_insert_delayed_block fs/ext4/inode.c:1696 [inline] ext4_da_map_blocks fs/ext4/inode.c:1806 [inline] ext4_da_get_block_prep+0x9e8/0x13c0 fs/ext4/inode.c:1870 ext4_block_write_begin+0x6a8/0x2290 fs/ext4/inode.c:1098 ext4_da_write_begin+0x539/0x760 fs/ext4/inode.c:3082 generic_perform_write+0x2e4/0x5e0 mm/filemap.c:3772 ext4_buffered_write_iter+0x122/0x3a0 fs/ext4/file.c:285 ext4_file_write_iter+0x1d0/0x18f0 call_write_iter include/linux/fs.h:2186 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x7dc/0xc50 fs/read_write.c:584 ksys_write+0x177/0x2a0 fs/read_write.c:637 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f4b7a9737b9 RSP: 002b:00007ffc5cac3668 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f4b7a9737b9 RDX: 00000000175d9003 RSI: 0000000020000200 RDI: 0000000000000004 RBP: 00007f4b7a933050 R08: 0000000000000000 R09: 0000000000000000 R10: 000000000000079f R11: 0000000000000246 R12: 00007f4b7a9330e0 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 </TASK> Above issue is happens when enable bigalloc and inline data feature. As commit |
||
|
Linus Torvalds
|
22b8cc3e78 |
Add support for new Linear Address Masking CPU feature. This is similar
to ARM's Top Byte Ignore and allows userspace to store metadata in some bits of pointers without masking it out before use. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEV76QKkVc4xCGURexaDWVMHDJkrAFAmRK/WIACgkQaDWVMHDJ krAL+RAAw33EhsWyYVkeAtYmYBKkGvlgeSDULtfJKe5bynJBTHkGKfM6RE9MSJIt 5fHWaConGh8HNpy0Us1sDvd/aWcWRm5h7ZcCVD+R4qrgh/vc7ULzM+elXe5jzr4W cyuTckF2eW6SVrYg6fH5q+6Uy/moDtrdkLRvwRBf+AYeepB8gvSSH5XixKDNiVBE pjNy1xXVZQokqD4tjsFelmLttyacR5OabiE/aeVNoFYf9yTwfnN8N3T6kwuOoS4l Lp6NA+/0ux+oBlR+Is+JJG8Mxrjvz96yJGZYdR2YP5k3bMQtHAAjuq2w+GgqZm5i j3/E6KQepEGaCfC+bHl68xy/kKx8ik+jMCEcBalCC25J3uxbLz41g6K3aI890wJn +5ZtfcmoDUk9pnUyLxR8t+UjOSBFAcRSUE+FTjUH1qEGsMPK++9a4iLXz5vYVK1+ +YCt1u5LNJbkDxE8xVX3F5jkXh0G01SJsuUVAOqHSNfqSNmohFK8/omqhVRrRqoK A7cYLtnOGiUXLnvjrwSxPNOzRrG+GAwqaw8gwOTaYogETWbTY8qsSCEVl204uYwd m8io9rk2ZXUdDuha56xpBbPE0JHL9hJ2eKCuPkfvRgJT9YFyTh+e0UdX20k+nDjc ang1S350o/Y0sus6rij1qS8AuxJIjHucG0GdgpZk3KUbcxoRLhI= =qitk -----END PGP SIGNATURE----- Merge tag 'x86_mm_for_6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 LAM (Linear Address Masking) support from Dave Hansen: "Add support for the new Linear Address Masking CPU feature. This is similar to ARM's Top Byte Ignore and allows userspace to store metadata in some bits of pointers without masking it out before use" * tag 'x86_mm_for_6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm/iommu/sva: Do not allow to set FORCE_TAGGED_SVA bit from outside x86/mm/iommu/sva: Fix error code for LAM enabling failure due to SVA selftests/x86/lam: Add test cases for LAM vs thread creation selftests/x86/lam: Add ARCH_FORCE_TAGGED_SVA test cases for linear-address masking selftests/x86/lam: Add inherit test cases for linear-address masking selftests/x86/lam: Add io_uring test cases for linear-address masking selftests/x86/lam: Add mmap and SYSCALL test cases for linear-address masking selftests/x86/lam: Add malloc and tag-bits test cases for linear-address masking x86/mm/iommu/sva: Make LAM and SVA mutually exclusive iommu/sva: Replace pasid_valid() helper with mm_valid_pasid() mm: Expose untagging mask in /proc/$PID/status x86/mm: Provide arch_prctl() interface for LAM x86/mm: Reduce untagged_addr() overhead for systems without LAM x86/uaccess: Provide untagged_addr() and remove tags before address check mm: Introduce untagged_addr_remote() x86/mm: Handle LAM on context switch x86: CPUID and CR3/CR4 flags for Linear Address Masking x86: Allow atomic MM_CONTEXT flags setting x86/mm: Rework address range check in get_user() and put_user() |
||
Maxim Korotkov
|
3e46c89c74 |
writeback: fix call of incorrect macro
the variable 'history' is of type u16, it may be an error
that the hweight32 macro was used for it
I guess macro hweight16 should be used
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes:
|
||
Naohiro Aota
|
631003e233 |
btrfs: zoned: fix wrong use of bitops API in btrfs_ensure_empty_zones
find_next_bit and find_next_zero_bit take @size as the second parameter and
@offset as the third parameter. They are specified opposite in
btrfs_ensure_empty_zones(). Thanks to the later loop, it never failed to
detect the empty zones. Fix them and (maybe) return the result a bit
faster.
Note: the naming is a bit confusing, size has two meanings here, bitmap
and our range size.
Fixes:
|
||
Zhihao Cheng
|
1dedde6903 |
ext4: fix i_disksize exceeding i_size problem in paritally written case
It is possible for i_disksize can exceed i_size, triggering a warning.
generic_perform_write
copied = iov_iter_copy_from_user_atomic(len) // copied < len
ext4_da_write_end
| ext4_update_i_disksize
| new_i_size = pos + copied;
| WRITE_ONCE(EXT4_I(inode)->i_disksize, newsize) // update i_disksize
| generic_write_end
| copied = block_write_end(copied, len) // copied = 0
| if (unlikely(copied < len))
| if (!PageUptodate(page))
| copied = 0;
| if (pos + copied > inode->i_size) // return false
if (unlikely(copied == 0))
goto again;
if (unlikely(iov_iter_fault_in_readable(i, bytes))) {
status = -EFAULT;
break;
}
We get i_disksize greater than i_size here, which could trigger WARNING
check 'i_size_read(inode) < EXT4_I(inode)->i_disksize' while doing dio:
ext4_dio_write_iter
iomap_dio_rw
__iomap_dio_rw // return err, length is not aligned to 512
ext4_handle_inode_extension
WARN_ON_ONCE(i_size_read(inode) < EXT4_I(inode)->i_disksize) // Oops
WARNING: CPU: 2 PID: 2609 at fs/ext4/file.c:319
CPU: 2 PID: 2609 Comm: aa Not tainted 6.3.0-rc2
RIP: 0010:ext4_file_write_iter+0xbc7
Call Trace:
vfs_write+0x3b1
ksys_write+0x77
do_syscall_64+0x39
Fix it by updating 'copied' value before updating i_disksize just like
ext4_write_inline_data_end() does.
A reproducer can be found in the buganizer link below.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217209
Fixes:
|
||
Qu Wenruo
|
64b5d5b285 |
btrfs: properly reject clear_cache and v1 cache for block-group-tree
[BUG] With block-group-tree feature enabled, mounting it with clear_cache would cause the following transaction abort at mount or remount: BTRFS info (device dm-4): force clearing of disk cache BTRFS info (device dm-4): using free space tree BTRFS info (device dm-4): auto enabling async discard BTRFS info (device dm-4): clearing free space tree BTRFS info (device dm-4): clearing compat-ro feature flag for FREE_SPACE_TREE (0x1) BTRFS info (device dm-4): clearing compat-ro feature flag for FREE_SPACE_TREE_VALID (0x2) BTRFS error (device dm-4): block-group-tree feature requires fres-space-tree and no-holes BTRFS error (device dm-4): super block corruption detected before writing it to disk BTRFS: error (device dm-4) in write_all_supers:4288: errno=-117 Filesystem corrupted (unexpected superblock corruption detected) BTRFS warning (device dm-4: state E): Skipping commit of aborted transaction. [CAUSE] For block-group-tree feature, we have an artificial dependency on free-space-tree. This means if we detect block-group-tree without v2 cache, we consider it a corruption and cause the problem. For clear_cache mount option, it would temporary disable v2 cache, then re-enable it. But unfortunately for that temporary v2 cache disabled status, we refuse to write a superblock with bg tree only flag, thus leads to the above transaction abortion. [FIX] For now, just reject clear_cache and v1 cache mount option for block group tree. So now we got a graceful rejection other than a transaction abort: BTRFS info (device dm-4): force clearing of disk cache BTRFS error (device dm-4): cannot disable free space tree with block-group-tree feature BTRFS error (device dm-4): open_ctree failed CC: stable@vger.kernel.org # 6.1+ Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
Filipe Manana
|
a2cea677db |
btrfs: print extent buffers when sibling keys check fails
When trying to move keys from one node/leaf to another sibling node/leaf, if the sibling keys check fails we just print an error message with the last key of the left sibling and the first key of the right sibling. However it's also useful to print all the keys of each sibling, as it may provide some clues to what went wrong, which code path may be inserting keys in an incorrect order. So just do that, print the siblings with btrfs_print_tree(), as it works for both leaves and nodes. Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Filipe Manana
|
9ae5afd02a |
btrfs: abort transaction when sibling keys check fails for leaves
If the sibling keys check fails before we move keys from one sibling leaf to another, we are not aborting the transaction - we leave that to some higher level caller of btrfs_search_slot() (or anything else that uses it to insert items into a b+tree). This means that the transaction abort will provide a stack trace that omits the b+tree modification call chain. So change this to immediately abort the transaction and therefore get a more useful stack trace that shows us the call chain in the bt+tree modification code. It's also important to immediately abort the transaction just in case some higher level caller is not doing it, as this indicates a very serious corruption and we should stop the possibility of doing further damage. Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Filipe Manana
|
611ccc58e1 |
btrfs: fix leak of source device allocation state after device replace
When a device replace finishes, the source device is freed by calling btrfs_free_device() at btrfs_rm_dev_replace_free_srcdev(), but the allocation state, tracked in the device's alloc_state io tree, is never freed. This is a regression recently introduced by commit |
||
xiaoshoukui
|
ac868bc9d1 |
btrfs: fix assertion of exclop condition when starting balance
Balance as exclusive state is compatible with paused balance and device add, which makes some things more complicated. The assertion of valid states when starting from paused balance needs to take into account two more states, the combinations can be hit when there are several threads racing to start balance and device add. This won't typically happen when the commands are started from command line. Scenario 1: With exclusive_operation state == BTRFS_EXCLOP_NONE. Concurrently adding multiple devices to the same mount point and btrfs_exclop_finish executed finishes before assertion in btrfs_exclop_balance, exclusive_operation will changed to BTRFS_EXCLOP_NONE state which lead to assertion failed: fs_info->exclusive_operation == BTRFS_EXCLOP_BALANCE || fs_info->exclusive_operation == BTRFS_EXCLOP_DEV_ADD, in fs/btrfs/ioctl.c:456 Call Trace: <TASK> btrfs_exclop_balance+0x13c/0x310 ? memdup_user+0xab/0xc0 ? PTR_ERR+0x17/0x20 btrfs_ioctl_add_dev+0x2ee/0x320 btrfs_ioctl+0x9d5/0x10d0 ? btrfs_ioctl_encoded_write+0xb80/0xb80 __x64_sys_ioctl+0x197/0x210 do_syscall_64+0x3c/0xb0 entry_SYSCALL_64_after_hwframe+0x63/0xcd Scenario 2: With exclusive_operation state == BTRFS_EXCLOP_BALANCE_PAUSED. Concurrently adding multiple devices to the same mount point and btrfs_exclop_balance executed finish before the latter thread execute assertion in btrfs_exclop_balance, exclusive_operation will changed to BTRFS_EXCLOP_BALANCE_PAUSED state which lead to assertion failed: fs_info->exclusive_operation == BTRFS_EXCLOP_BALANCE || fs_info->exclusive_operation == BTRFS_EXCLOP_DEV_ADD || fs_info->exclusive_operation == BTRFS_EXCLOP_NONE, fs/btrfs/ioctl.c:458 Call Trace: <TASK> btrfs_exclop_balance+0x240/0x410 ? memdup_user+0xab/0xc0 ? PTR_ERR+0x17/0x20 btrfs_ioctl_add_dev+0x2ee/0x320 btrfs_ioctl+0x9d5/0x10d0 ? btrfs_ioctl_encoded_write+0xb80/0xb80 __x64_sys_ioctl+0x197/0x210 do_syscall_64+0x3c/0xb0 entry_SYSCALL_64_after_hwframe+0x63/0xcd An example of the failed assertion is below, which shows that the paused balance is also needed to be checked. root@syzkaller:/home/xsk# ./repro Failed to add device /dev/vda, errno 14 Failed to add device /dev/vda, errno 14 Failed to add device /dev/vda, errno 14 Failed to add device /dev/vda, errno 14 Failed to add device /dev/vda, errno 14 Failed to add device /dev/vda, errno 14 Failed to add device /dev/vda, errno 14 Failed to add device /dev/vda, errno 14 Failed to add device /dev/vda, errno 14 [ 416.611428][ T7970] BTRFS info (device loop0): fs_info exclusive_operation: 0 Failed to add device /dev/vda, errno 14 [ 416.613973][ T7971] BTRFS info (device loop0): fs_info exclusive_operation: 3 Failed to add device /dev/vda, errno 14 [ 416.615456][ T7972] BTRFS info (device loop0): fs_info exclusive_operation: 3 Failed to add device /dev/vda, errno 14 [ 416.617528][ T7973] BTRFS info (device loop0): fs_info exclusive_operation: 3 Failed to add device /dev/vda, errno 14 [ 416.618359][ T7974] BTRFS info (device loop0): fs_info exclusive_operation: 3 Failed to add device /dev/vda, errno 14 [ 416.622589][ T7975] BTRFS info (device loop0): fs_info exclusive_operation: 3 Failed to add device /dev/vda, errno 14 [ 416.624034][ T7976] BTRFS info (device loop0): fs_info exclusive_operation: 3 Failed to add device /dev/vda, errno 14 [ 416.626420][ T7977] BTRFS info (device loop0): fs_info exclusive_operation: 3 Failed to add device /dev/vda, errno 14 [ 416.627643][ T7978] BTRFS info (device loop0): fs_info exclusive_operation: 3 Failed to add device /dev/vda, errno 14 [ 416.629006][ T7979] BTRFS info (device loop0): fs_info exclusive_operation: 3 [ 416.630298][ T7980] BTRFS info (device loop0): fs_info exclusive_operation: 3 Failed to add device /dev/vda, errno 14 Failed to add device /dev/vda, errno 14 [ 416.632787][ T7981] BTRFS info (device loop0): fs_info exclusive_operation: 3 Failed to add device /dev/vda, errno 14 [ 416.634282][ T7982] BTRFS info (device loop0): fs_info exclusive_operation: 3 Failed to add device /dev/vda, errno 14 [ 416.636202][ T7983] BTRFS info (device loop0): fs_info exclusive_operation: 3 [ 416.637012][ T7984] BTRFS info (device loop0): fs_info exclusive_operation: 1 Failed to add device /dev/vda, errno 14 [ 416.637759][ T7984] assertion failed: fs_info->exclusive_operation == BTRFS_EXCLOP_BALANCE || fs_info->exclusive_operation == BTRFS_EXCLOP_DEV_ADD || fs_info->exclusive_operation == BTRFS_EXCLOP_NONE, in fs/btrfs/ioctl.c:458 [ 416.639845][ T7984] invalid opcode: 0000 [#1] PREEMPT SMP KASAN [ 416.640485][ T7984] CPU: 0 PID: 7984 Comm: repro Not tainted 6.2.0 #7 [ 416.641172][ T7984] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 [ 416.642090][ T7984] RIP: 0010:btrfs_assertfail+0x2c/0x2e [ 416.644423][ T7984] RSP: 0018:ffffc90003ea7e28 EFLAGS: 00010282 [ 416.645018][ T7984] RAX: 00000000000000cc RBX: 0000000000000000 RCX: 0000000000000000 [ 416.645763][ T7984] RDX: ffff88801d030000 RSI: ffffffff81637e7c RDI: fffff520007d4fb7 [ 416.646554][ T7984] RBP: ffffffff8a533de0 R08: 00000000000000cc R09: 0000000000000000 [ 416.647299][ T7984] R10: 0000000000000001 R11: 0000000000000001 R12: ffffffff8a533da0 [ 416.648041][ T7984] R13: 00000000000001ca R14: 000000005000940a R15: 0000000000000000 [ 416.648785][ T7984] FS: 00007fa2985d4640(0000) GS:ffff88802cc00000(0000) knlGS:0000000000000000 [ 416.649616][ T7984] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 416.650238][ T7984] CR2: 0000000000000000 CR3: 0000000018e5e000 CR4: 0000000000750ef0 [ 416.650980][ T7984] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 416.651725][ T7984] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 416.652502][ T7984] PKRU: 55555554 [ 416.652888][ T7984] Call Trace: [ 416.653241][ T7984] <TASK> [ 416.653527][ T7984] btrfs_exclop_balance+0x240/0x410 [ 416.654036][ T7984] ? memdup_user+0xab/0xc0 [ 416.654465][ T7984] ? PTR_ERR+0x17/0x20 [ 416.654874][ T7984] btrfs_ioctl_add_dev+0x2ee/0x320 [ 416.655380][ T7984] btrfs_ioctl+0x9d5/0x10d0 [ 416.655822][ T7984] ? btrfs_ioctl_encoded_write+0xb80/0xb80 [ 416.656400][ T7984] __x64_sys_ioctl+0x197/0x210 [ 416.656874][ T7984] do_syscall_64+0x3c/0xb0 [ 416.657346][ T7984] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 416.657922][ T7984] RIP: 0033:0x4546af [ 416.660170][ T7984] RSP: 002b:00007fa2985d4150 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 416.660972][ T7984] RAX: ffffffffffffffda RBX: 00007fa2985d4640 RCX: 00000000004546af [ 416.661714][ T7984] RDX: 0000000000000000 RSI: 000000005000940a RDI: 0000000000000003 [ 416.662449][ T7984] RBP: 00007fa2985d41d0 R08: 0000000000000000 R09: 00007ffee37a4c4f [ 416.663195][ T7984] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fa2985d4640 [ 416.663951][ T7984] R13: 0000000000000009 R14: 000000000041b320 R15: 00007fa297dd4000 [ 416.664703][ T7984] </TASK> [ 416.665040][ T7984] Modules linked in: [ 416.665590][ T7984] ---[ end trace 0000000000000000 ]--- [ 416.666176][ T7984] RIP: 0010:btrfs_assertfail+0x2c/0x2e [ 416.668775][ T7984] RSP: 0018:ffffc90003ea7e28 EFLAGS: 00010282 [ 416.669425][ T7984] RAX: 00000000000000cc RBX: 0000000000000000 RCX: 0000000000000000 [ 416.670235][ T7984] RDX: ffff88801d030000 RSI: ffffffff81637e7c RDI: fffff520007d4fb7 [ 416.671050][ T7984] RBP: ffffffff8a533de0 R08: 00000000000000cc R09: 0000000000000000 [ 416.671867][ T7984] R10: 0000000000000001 R11: 0000000000000001 R12: ffffffff8a533da0 [ 416.672685][ T7984] R13: 00000000000001ca R14: 000000005000940a R15: 0000000000000000 [ 416.673501][ T7984] FS: 00007fa2985d4640(0000) GS:ffff88802cc00000(0000) knlGS:0000000000000000 [ 416.674425][ T7984] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 416.675114][ T7984] CR2: 0000000000000000 CR3: 0000000018e5e000 CR4: 0000000000750ef0 [ 416.675933][ T7984] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 416.676760][ T7984] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Link: https://lore.kernel.org/linux-btrfs/20230324031611.98986-1-xiaoshoukui@gmail.com/ CC: stable@vger.kernel.org # 6.1+ Signed-off-by: xiaoshoukui <xiaoshoukui@ruijie.com.cn> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Filipe Manana
|
6f932d4ef0 |
btrfs: fix btrfs_prev_leaf() to not return the same key twice
A call to btrfs_prev_leaf() may end up returning a path that points to the
same item (key) again. This happens if while btrfs_prev_leaf(), after we
release the path, a concurrent insertion happens, which moves items off
from a sibling into the front of the previous leaf, and an item with the
computed previous key does not exists.
For example, suppose we have the two following leaves:
Leaf A
-------------------------------------------------------------
| ... key (300 96 10) key (300 96 15) key (300 96 16) |
-------------------------------------------------------------
slot 20 slot 21 slot 22
Leaf B
-------------------------------------------------------------
| key (300 96 20) key (300 96 21) key (300 96 22) ... |
-------------------------------------------------------------
slot 0 slot 1 slot 2
If we call btrfs_prev_leaf(), from btrfs_previous_item() for example, with
a path pointing to leaf B and slot 0 and the following happens:
1) At btrfs_prev_leaf() we compute the previous key to search as:
(300 96 19), which is a key that does not exists in the tree;
2) Then we call btrfs_release_path() at btrfs_prev_leaf();
3) Some other task inserts a key at leaf A, that sorts before the key at
slot 20, for example it has an objectid of 299. In order to make room
for the new key, the key at slot 22 is moved to the front of leaf B.
This happens at push_leaf_right(), called from split_leaf().
After this leaf B now looks like:
--------------------------------------------------------------------------------
| key (300 96 16) key (300 96 20) key (300 96 21) key (300 96 22) ... |
--------------------------------------------------------------------------------
slot 0 slot 1 slot 2 slot 3
4) At btrfs_prev_leaf() we call btrfs_search_slot() for the computed
previous key: (300 96 19). Since the key does not exists,
btrfs_search_slot() returns 1 and with a path pointing to leaf B
and slot 1, the item with key (300 96 20);
5) This makes btrfs_prev_leaf() return a path that points to slot 1 of
leaf B, the same key as before it was called, since the key at slot 0
of leaf B (300 96 16) is less than the computed previous key, which is
(300 96 19);
6) As a consequence btrfs_previous_item() returns a path that points again
to the item with key (300 96 20).
For some users of btrfs_prev_leaf() or btrfs_previous_item() this may not
be functional a problem, despite not making sense to return a new path
pointing again to the same item/key. However for a caller such as
tree-log.c:log_dir_items(), this has a bad consequence, as it can result
in not logging some dir index deletions in case the directory is being
logged without holding the inode's VFS lock (logging triggered while
logging a child inode for example) - for the example scenario above, in
case the dir index keys 17, 18 and 19 were deleted in the current
transaction.
CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
||
|
Linus Torvalds
|
33afd4b763 |
Mainly singleton patches all over the place. Series of note are:
- updates to scripts/gdb from Glenn Washburn - kexec cleanups from Bjorn Helgaas -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZEr+6wAKCRDdBJ7gKXxA jn4NAP4u/hj/kR2dxYehcVLuQqJspCRZZBZlAReFJyHNQO6voAEAk0NN9rtG2+/E r0G29CJhK+YL0W6mOs8O1yo9J1rZnAM= =2CUV -----END PGP SIGNATURE----- Merge tag 'mm-nonmm-stable-2023-04-27-16-01' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull non-MM updates from Andrew Morton: "Mainly singleton patches all over the place. Series of note are: - updates to scripts/gdb from Glenn Washburn - kexec cleanups from Bjorn Helgaas" * tag 'mm-nonmm-stable-2023-04-27-16-01' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (50 commits) mailmap: add entries for Paul Mackerras libgcc: add forward declarations for generic library routines mailmap: add entry for Oleksandr ocfs2: reduce ioctl stack usage fs/proc: add Kthread flag to /proc/$pid/status ia64: fix an addr to taddr in huge_pte_offset() checkpatch: introduce proper bindings license check epoll: rename global epmutex scripts/gdb: add GDB convenience functions $lx_dentry_name() and $lx_i_dentry() scripts/gdb: create linux/vfs.py for VFS related GDB helpers uapi/linux/const.h: prefer ISO-friendly __typeof__ delayacct: track delays from IRQ/SOFTIRQ scripts/gdb: timerlist: convert int chunks to str scripts/gdb: print interrupts scripts/gdb: raise error with reduced debugging information scripts/gdb: add a Radix Tree Parser lib/rbtree: use '+' instead of '|' for setting color. proc/stat: remove arch_idle_time() checkpatch: check for misuse of the link tags checkpatch: allow Closes tags with links ... |
||
|
Linus Torvalds
|
7fa8a8ee94 |
- Nick Piggin's "shoot lazy tlbs" series, to improve the peformance of
switching from a user process to a kernel thread.
- More folio conversions from Kefeng Wang, Zhang Peng and Pankaj Raghav.
- zsmalloc performance improvements from Sergey Senozhatsky.
- Yue Zhao has found and fixed some data race issues around the
alteration of memcg userspace tunables.
- VFS rationalizations from Christoph Hellwig:
- removal of most of the callers of write_one_page().
- make __filemap_get_folio()'s return value more useful
- Luis Chamberlain has changed tmpfs so it no longer requires swap
backing. Use `mount -o noswap'.
- Qi Zheng has made the slab shrinkers operate locklessly, providing
some scalability benefits.
- Keith Busch has improved dmapool's performance, making part of its
operations O(1) rather than O(n).
- Peter Xu adds the UFFD_FEATURE_WP_UNPOPULATED feature to userfaultd,
permitting userspace to wr-protect anon memory unpopulated ptes.
- Kirill Shutemov has changed MAX_ORDER's meaning to be inclusive rather
than exclusive, and has fixed a bunch of errors which were caused by its
unintuitive meaning.
- Axel Rasmussen give userfaultfd the UFFDIO_CONTINUE_MODE_WP feature,
which causes minor faults to install a write-protected pte.
- Vlastimil Babka has done some maintenance work on vma_merge():
cleanups to the kernel code and improvements to our userspace test
harness.
- Cleanups to do_fault_around() by Lorenzo Stoakes.
- Mike Rapoport has moved a lot of initialization code out of various
mm/ files and into mm/mm_init.c.
- Lorenzo Stoakes removd vmf_insert_mixed_prot(), which was added for
DRM, but DRM doesn't use it any more.
- Lorenzo has also coverted read_kcore() and vread() to use iterators
and has thereby removed the use of bounce buffers in some cases.
- Lorenzo has also contributed further cleanups of vma_merge().
- Chaitanya Prakash provides some fixes to the mmap selftesting code.
- Matthew Wilcox changes xfs and afs so they no longer take sleeping
locks in ->map_page(), a step towards RCUification of pagefaults.
- Suren Baghdasaryan has improved mmap_lock scalability by switching to
per-VMA locking.
- Frederic Weisbecker has reworked the percpu cache draining so that it
no longer causes latency glitches on cpu isolated workloads.
- Mike Rapoport cleans up and corrects the ARCH_FORCE_MAX_ORDER Kconfig
logic.
- Liu Shixin has changed zswap's initialization so we no longer waste a
chunk of memory if zswap is not being used.
- Yosry Ahmed has improved the performance of memcg statistics flushing.
- David Stevens has fixed several issues involving khugepaged,
userfaultfd and shmem.
- Christoph Hellwig has provided some cleanup work to zram's IO-related
code paths.
- David Hildenbrand has fixed up some issues in the selftest code's
testing of our pte state changing.
- Pankaj Raghav has made page_endio() unneeded and has removed it.
- Peter Xu contributed some rationalizations of the userfaultfd
selftests.
- Yosry Ahmed has fixed an issue around memcg's page recalim accounting.
- Chaitanya Prakash has fixed some arm-related issues in the
selftests/mm code.
- Longlong Xia has improved the way in which KSM handles hwpoisoned
pages.
- Peter Xu fixes a few issues with uffd-wp at fork() time.
- Stefan Roesch has changed KSM so that it may now be used on a
per-process and per-cgroup basis.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZEr3zQAKCRDdBJ7gKXxA
jlLoAP0fpQBipwFxED0Us4SKQfupV6z4caXNJGPeay7Aj11/kQD/aMRC2uPfgr96
eMG3kwn2pqkB9ST2QpkaRbxA//eMbQY=
=J+Dj
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2023-04-27-15-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Nick Piggin's "shoot lazy tlbs" series, to improve the peformance of
switching from a user process to a kernel thread.
- More folio conversions from Kefeng Wang, Zhang Peng and Pankaj
Raghav.
- zsmalloc performance improvements from Sergey Senozhatsky.
- Yue Zhao has found and fixed some data race issues around the
alteration of memcg userspace tunables.
- VFS rationalizations from Christoph Hellwig:
- removal of most of the callers of write_one_page()
- make __filemap_get_folio()'s return value more useful
- Luis Chamberlain has changed tmpfs so it no longer requires swap
backing. Use `mount -o noswap'.
- Qi Zheng has made the slab shrinkers operate locklessly, providing
some scalability benefits.
- Keith Busch has improved dmapool's performance, making part of its
operations O(1) rather than O(n).
- Peter Xu adds the UFFD_FEATURE_WP_UNPOPULATED feature to userfaultd,
permitting userspace to wr-protect anon memory unpopulated ptes.
- Kirill Shutemov has changed MAX_ORDER's meaning to be inclusive
rather than exclusive, and has fixed a bunch of errors which were
caused by its unintuitive meaning.
- Axel Rasmussen give userfaultfd the UFFDIO_CONTINUE_MODE_WP feature,
which causes minor faults to install a write-protected pte.
- Vlastimil Babka has done some maintenance work on vma_merge():
cleanups to the kernel code and improvements to our userspace test
harness.
- Cleanups to do_fault_around() by Lorenzo Stoakes.
- Mike Rapoport has moved a lot of initialization code out of various
mm/ files and into mm/mm_init.c.
- Lorenzo Stoakes removd vmf_insert_mixed_prot(), which was added for
DRM, but DRM doesn't use it any more.
- Lorenzo has also coverted read_kcore() and vread() to use iterators
and has thereby removed the use of bounce buffers in some cases.
- Lorenzo has also contributed further cleanups of vma_merge().
- Chaitanya Prakash provides some fixes to the mmap selftesting code.
- Matthew Wilcox changes xfs and afs so they no longer take sleeping
locks in ->map_page(), a step towards RCUification of pagefaults.
- Suren Baghdasaryan has improved mmap_lock scalability by switching to
per-VMA locking.
- Frederic Weisbecker has reworked the percpu cache draining so that it
no longer causes latency glitches on cpu isolated workloads.
- Mike Rapoport cleans up and corrects the ARCH_FORCE_MAX_ORDER Kconfig
logic.
- Liu Shixin has changed zswap's initialization so we no longer waste a
chunk of memory if zswap is not being used.
- Yosry Ahmed has improved the performance of memcg statistics
flushing.
- David Stevens has fixed several issues involving khugepaged,
userfaultfd and shmem.
- Christoph Hellwig has provided some cleanup work to zram's IO-related
code paths.
- David Hildenbrand has fixed up some issues in the selftest code's
testing of our pte state changing.
- Pankaj Raghav has made page_endio() unneeded and has removed it.
- Peter Xu contributed some rationalizations of the userfaultfd
selftests.
- Yosry Ahmed has fixed an issue around memcg's page recalim
accounting.
- Chaitanya Prakash has fixed some arm-related issues in the
selftests/mm code.
- Longlong Xia has improved the way in which KSM handles hwpoisoned
pages.
- Peter Xu fixes a few issues with uffd-wp at fork() time.
- Stefan Roesch has changed KSM so that it may now be used on a
per-process and per-cgroup basis.
* tag 'mm-stable-2023-04-27-15-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (369 commits)
mm,unmap: avoid flushing TLB in batch if PTE is inaccessible
shmem: restrict noswap option to initial user namespace
mm/khugepaged: fix conflicting mods to collapse_file()
sparse: remove unnecessary 0 values from rc
mm: move 'mmap_min_addr' logic from callers into vm_unmapped_area()
hugetlb: pte_alloc_huge() to replace huge pte_alloc_map()
maple_tree: fix allocation in mas_sparse_area()
mm: do not increment pgfault stats when page fault handler retries
zsmalloc: allow only one active pool compaction context
selftests/mm: add new selftests for KSM
mm: add new KSM process and sysfs knobs
mm: add new api to enable ksm per process
mm: shrinkers: fix debugfs file permissions
mm: don't check VMA write permissions if the PTE/PMD indicates write permissions
migrate_pages_batch: fix statistics for longterm pin retry
userfaultfd: use helper function range_in_vma()
lib/show_mem.c: use for_each_populated_zone() simplify code
mm: correct arg in reclaim_pages()/reclaim_clean_pages_from_list()
fs/buffer: convert create_page_buffers to folio_create_buffers
fs/buffer: add folio_create_empty_buffers helper
...
|
||
|
Linus Torvalds
|
0835b5ee87 |
pstore update for v6.4-rc1
- Revert pmsg_lock back to a normal mutex (John Stultz) -----BEGIN PGP SIGNATURE----- iQJKBAABCgA0FiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAmRJaPkWHGtlZXNjb29r QGNocm9taXVtLm9yZwAKCRCJcvTf3G3AJtADD/42DSLBg9dAvFHUpXSuffbbhL/w HhbfPlsmSujWWWRE3xmEaWJrUQ+Ag6NHyHR7Euko6tBhtj1MhtPle4Di57H5sMid 8R+7C+3XDmy5WeUF60dribiiKjtNiRIzWefsQyHn4fguaZ5SWHN+iwtvmBofWC44 YQXaLR5lbxukZTKwiPjdJefS139/QMsKXx3mKu7IdtjjZ5yemH8iTvsQS/2nLkIS LWgBN2boopSVtJJslam/29JIhtT9UGoS/ooFJGkoFKXJrVY1+aiqxrYDihgH1K6b FoEb/+G/z9M9KxCNGOqv/h+Nl2Oa5L8hdvBy5UsUxhGUNG8/nqsjIwWjJmba9fJu 3bJfMpsEja955Omq73UFVsgR8OTuy5z91XbR3jJk+4YQlXWgcqvoAYiM0SHX4z7W tB1OPCTGDaNLInYA6YHESlbiAmtk/Peizgs9n4PkOeCN26LWGV/FfjR+zorO+6xO NNbM1XN/Xdzp/oNwnU3TqRdI6F7v81uQfIiS0VDJoJ7jpHAVQA042l2zwihoopC2 ErIBKUqpgfGUDxu29QEdfhdwkSfofyjfOzZ5iHYVsvxhn7oS7Xx+zxyp/mFReoIF bsqUsAZdCeMgye8wZZmNDlGaLsmLJB/bnt6XqNYMtSzp6ktpIkyBn/rRqhQYRrZK g//x5fMMz8fNZK1z0w== =5Jr7 -----END PGP SIGNATURE----- Merge tag 'pstore-v6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull pstore update from Kees Cook: - Revert pmsg_lock back to a normal mutex (John Stultz) * tag 'pstore-v6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: pstore: Revert pmsg_lock back to a normal mutex |
||
|
Linus Torvalds
|
888d3c9f7f |
sysctl-6.4-rc1
This pull request goes with only a few sysctl moves from the kernel/sysctl.c file, the rest of the work has been put towards deprecating two API calls which incur recursion and prevent us from simplifying the registration process / saving memory per move. Most of the changes have been soaking on linux-next since v6.3-rc3. I've slowed down the kernel/sysctl.c moves due to Matthew Wilcox's feedback that we should see if we could *save* memory with these moves instead of incurring more memory. We currently incur more memory since when we move a syctl from kernel/sysclt.c out to its own file we end up having to add a new empty sysctl used to register it. To achieve saving memory we want to allow syctls to be passed without requiring the end element being empty, and just have our registration process rely on ARRAY_SIZE(). Without this, supporting both styles of sysctls would make the sysctl registration pretty brittle, hard to read and maintain as can be seen from Meng Tang's efforts to do just this [0]. Fortunately, in order to use ARRAY_SIZE() for all sysctl registrations also implies doing the work to deprecate two API calls which use recursion in order to support sysctl declarations with subdirectories. And so during this development cycle quite a bit of effort went into this deprecation effort. I've annotated the following two APIs are deprecated and in few kernel releases we should be good to remove them: * register_sysctl_table() * register_sysctl_paths() During this merge window we should be able to deprecate and unexport register_sysctl_paths(), we can probably do that towards the end of this merge window. Deprecating register_sysctl_table() will take a bit more time but this pull request goes with a few example of how to do this. As it turns out each of the conversions to move away from either of these two API calls *also* saves memory. And so long term, all these changes *will* prove to have saved a bit of memory on boot. The way I see it then is if remove a user of one deprecated call, it gives us enough savings to move one kernel/sysctl.c out from the generic arrays as we end up with about the same amount of bytes. Since deprecating register_sysctl_table() and register_sysctl_paths() does not require maintainer coordination except the final unexport you'll see quite a bit of these changes from other pull requests, I've just kept the stragglers after rc3. Most of these changes have been soaking on linux-next since around rc3. [0] https://lkml.kernel.org/r/ZAD+cpbrqlc5vmry@bombadil.infradead.org -----BEGIN PGP SIGNATURE----- iQJGBAABCgAwFiEENnNq2KuOejlQLZofziMdCjCSiKcFAmRHAjQSHG1jZ3JvZkBr ZXJuZWwub3JnAAoJEM4jHQowkoinTzgQAI/uKHKi0VlUR1l2Psl0XbseUVueuyj3 ZDxSJpbVUmsoDf2MlLjzB8mYE3ricnNTDbLr7qOyA6pXdM1N0mY5LQmRVRu8/ffd 2T1hQ5pl7YnJdWP5dPhcF9Y+jnu1tjX1MW5DS4fzllwK7FnD86HuIruGq52RAPS/ /FH+BD9eodLWWXk6A/o2GFqoWxPKQI0GLxEYWa7Hg7yt8E/3PQL9QsRzn8i6U+HW BrN/+G3YD1VCCzXu0UAeXnm+i1Z7CdvqNdZuSkvE3DObiZ5WpOS+/i7FrDB7zdiu zAbHaifHnDPtcK3w2ZodbLAAwEWD/mG4iwIjE2kgIMVYxBv7TFDBRREXAWYAevIT UUuZnWDQsGaWdjywrebaUycEfd6dytKyan0fTXgMFkcoWRjejhitfdM2iZDdQROg q453p4HqOw4vTrhy4ov4zOX7J3EFiBzpZdl+SmLqcXk+jbLVb/Q9snUWz1AFtHBl gHoP5bS82uVktGG3MsObjgTzYYMQjO9YGIrVuW1VP9uWs8WaoWx6M9FQJIIhtwE+ h6wG2s7CjuFWnS0/IxWmDOn91QyUn1w7ohiz9TuvYj/5GLSBpBDGCJHsNB5T2WS1 qbQRaZ2Kg3j9TeyWfXxdlxBx7bt3ni+J/IXDY0zom2sTpGHKl8D2g5AzmEXJDTpl kd7Z3gsmwhDh =0U0W -----END PGP SIGNATURE----- Merge tag 'sysctl-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux Pull sysctl updates from Luis Chamberlain: "This only does a few sysctl moves from the kernel/sysctl.c file, the rest of the work has been put towards deprecating two API calls which incur recursion and prevent us from simplifying the registration process / saving memory per move. Most of the changes have been soaking on linux-next since v6.3-rc3. I've slowed down the kernel/sysctl.c moves due to Matthew Wilcox's feedback that we should see if we could *save* memory with these moves instead of incurring more memory. We currently incur more memory since when we move a syctl from kernel/sysclt.c out to its own file we end up having to add a new empty sysctl used to register it. To achieve saving memory we want to allow syctls to be passed without requiring the end element being empty, and just have our registration process rely on ARRAY_SIZE(). Without this, supporting both styles of sysctls would make the sysctl registration pretty brittle, hard to read and maintain as can be seen from Meng Tang's efforts to do just this [0]. Fortunately, in order to use ARRAY_SIZE() for all sysctl registrations also implies doing the work to deprecate two API calls which use recursion in order to support sysctl declarations with subdirectories. And so during this development cycle quite a bit of effort went into this deprecation effort. I've annotated the following two APIs are deprecated and in few kernel releases we should be good to remove them: - register_sysctl_table() - register_sysctl_paths() During this merge window we should be able to deprecate and unexport register_sysctl_paths(), we can probably do that towards the end of this merge window. Deprecating register_sysctl_table() will take a bit more time but this pull request goes with a few example of how to do this. As it turns out each of the conversions to move away from either of these two API calls *also* saves memory. And so long term, all these changes *will* prove to have saved a bit of memory on boot. The way I see it then is if remove a user of one deprecated call, it gives us enough savings to move one kernel/sysctl.c out from the generic arrays as we end up with about the same amount of bytes. Since deprecating register_sysctl_table() and register_sysctl_paths() does not require maintainer coordination except the final unexport you'll see quite a bit of these changes from other pull requests, I've just kept the stragglers after rc3" Link: https://lkml.kernel.org/r/ZAD+cpbrqlc5vmry@bombadil.infradead.org [0] * tag 'sysctl-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: (29 commits) fs: fix sysctls.c built mm: compaction: remove incorrect #ifdef checks mm: compaction: move compaction sysctl to its own file mm: memory-failure: Move memory failure sysctls to its own file arm: simplify two-level sysctl registration for ctl_isa_vars ia64: simplify one-level sysctl registration for kdump_ctl_table utsname: simplify one-level sysctl registration for uts_kern_table ntfs: simplfy one-level sysctl registration for ntfs_sysctls coda: simplify one-level sysctl registration for coda_table fs/cachefiles: simplify one-level sysctl registration for cachefiles_sysctls xfs: simplify two-level sysctl registration for xfs_table nfs: simplify two-level sysctl registration for nfs_cb_sysctls nfs: simplify two-level sysctl registration for nfs4_cb_sysctls lockd: simplify two-level sysctl registration for nlm_sysctls proc_sysctl: enhance documentation xen: simplify sysctl registration for balloon md: simplify sysctl registration hv: simplify sysctl registration scsi: simplify sysctl registration with register_sysctl() csky: simplify alignment sysctl registration ... |
||
|
Linus Torvalds
|
b6a7828502 |
modules-6.4-rc1
The summary of the changes for this pull requests is:
* Song Liu's new struct module_memory replacement
* Nick Alcock's MODULE_LICENSE() removal for non-modules
* My cleanups and enhancements to reduce the areas where we vmalloc
module memory for duplicates, and the respective debug code which
proves the remaining vmalloc pressure comes from userspace.
Most of the changes have been in linux-next for quite some time except
the minor fixes I made to check if a module was already loaded
prior to allocating the final module memory with vmalloc and the
respective debug code it introduces to help clarify the issue. Although
the functional change is small it is rather safe as it can only *help*
reduce vmalloc space for duplicates and is confirmed to fix a bootup
issue with over 400 CPUs with KASAN enabled. I don't expect stable
kernels to pick up that fix as the cleanups would have also had to have
been picked up. Folks on larger CPU systems with modules will want to
just upgrade if vmalloc space has been an issue on bootup.
Given the size of this request, here's some more elaborate details
on this pull request.
The functional change change in this pull request is the very first
patch from Song Liu which replaces the struct module_layout with a new
struct module memory. The old data structure tried to put together all
types of supported module memory types in one data structure, the new
one abstracts the differences in memory types in a module to allow each
one to provide their own set of details. This paves the way in the
future so we can deal with them in a cleaner way. If you look at changes
they also provide a nice cleanup of how we handle these different memory
areas in a module. This change has been in linux-next since before the
merge window opened for v6.3 so to provide more than a full kernel cycle
of testing. It's a good thing as quite a bit of fixes have been found
for it.
Jason Baron then made dynamic debug a first class citizen module user by
using module notifier callbacks to allocate / remove module specific
dynamic debug information.
Nick Alcock has done quite a bit of work cross-tree to remove module
license tags from things which cannot possibly be module at my request
so to:
a) help him with his longer term tooling goals which require a
deterministic evaluation if a piece a symbol code could ever be
part of a module or not. But quite recently it is has been made
clear that tooling is not the only one that would benefit.
Disambiguating symbols also helps efforts such as live patching,
kprobes and BPF, but for other reasons and R&D on this area
is active with no clear solution in sight.
b) help us inch closer to the now generally accepted long term goal
of automating all the MODULE_LICENSE() tags from SPDX license tags
In so far as a) is concerned, although module license tags are a no-op
for non-modules, tools which would want create a mapping of possible
modules can only rely on the module license tag after the commit
|
||
Chuck Lever
|
9280c57743 |
NFSD: Handle new xprtsec= export option
Enable administrators to require clients to use transport layer security when accessing particular exports. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> |
||
|
Chuck Lever
|
22b620ec0b |
NFSD: Clean up xattr memory allocation flags
Tetsuo Handa points out: > Since GFP_KERNEL is "GFP_NOFS | __GFP_FS", usage like > "GFP_KERNEL | GFP_NOFS" does not make sense. The original intent was to hold the inode lock while estimating the buffer requirements for the requested information. Frank van der Linden, the author of NFSD's xattr code, says: > ... you need inode_lock to get an atomic view of an xattr. Since > both nfsd_getxattr and nfsd_listxattr to the standard trick of > querying the xattr length with a NULL buf argument (just getting > the length back), allocating the right buffer size, and then > querying again, they need to hold the inode lock to avoid having > the xattr changed from under them while doing that. > > From that then flows the requirement that GFP_FS could cause > problems while holding i_rwsem, so I added GFP_NOFS. However, Dave Chinner states: > You can do GFP_KERNEL allocations holding the i_rwsem just fine. > All that it requires is the caller holds a reference to the > inode ... Since these code paths acquire a dentry, they do indeed hold a reference. It is therefore safe to use GFP_KERNEL for these memory allocations. In particular, that's what this code is already doing; but now the C source code looks sane too. At a later time we can revisit in order to remove the inode lock in favor of simply retrying if the estimated buffer size is too small. Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> |
||
Dai Ngo
|
147abcacee |
NFSD: Fix problem of COMMIT and NFS4ERR_DELAY in infinite loop
The following request sequence to the same file causes the NFS client and
server getting into an infinite loop with COMMIT and NFS4ERR_DELAY:
OPEN
REMOVE
WRITE
COMMIT
Problem reported by recall11, recall12, recall14, recall20, recall22,
recall40, recall42, recall48, recall50 of nfstest suite.
This patch restores the handling of race condition in nfsd_file_do_acquire
with unlink to that prior of the regression.
Fixes:
|
||
|
Linus Torvalds
|
556eb8b791 |
Driver core changes for 6.4-rc1
Here is the large set of driver core changes for 6.4-rc1. Once again, a busy development cycle, with lots of changes happening in the driver core in the quest to be able to move "struct bus" and "struct class" into read-only memory, a task now complete with these changes. This will make the future rust interactions with the driver core more "provably correct" as well as providing more obvious lifetime rules for all busses and classes in the kernel. The changes required for this did touch many individual classes and busses as many callbacks were changed to take const * parameters instead. All of these changes have been submitted to the various subsystem maintainers, giving them plenty of time to review, and most of them actually did so. Other than those changes, included in here are a small set of other things: - kobject logging improvements - cacheinfo improvements and updates - obligatory fw_devlink updates and fixes - documentation updates - device property cleanups and const * changes - firwmare loader dependency fixes. All of these have been in linux-next for a while with no reported problems. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZEp7Sw8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ykitQCfamUHpxGcKOAGuLXMotXNakTEsxgAoIquENm5 LEGadNS38k5fs+73UaxV =7K4B -----END PGP SIGNATURE----- Merge tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the large set of driver core changes for 6.4-rc1. Once again, a busy development cycle, with lots of changes happening in the driver core in the quest to be able to move "struct bus" and "struct class" into read-only memory, a task now complete with these changes. This will make the future rust interactions with the driver core more "provably correct" as well as providing more obvious lifetime rules for all busses and classes in the kernel. The changes required for this did touch many individual classes and busses as many callbacks were changed to take const * parameters instead. All of these changes have been submitted to the various subsystem maintainers, giving them plenty of time to review, and most of them actually did so. Other than those changes, included in here are a small set of other things: - kobject logging improvements - cacheinfo improvements and updates - obligatory fw_devlink updates and fixes - documentation updates - device property cleanups and const * changes - firwmare loader dependency fixes. All of these have been in linux-next for a while with no reported problems" * tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits) device property: make device_property functions take const device * driver core: update comments in device_rename() driver core: Don't require dynamic_debug for initcall_debug probe timing firmware_loader: rework crypto dependencies firmware_loader: Strip off \n from customized path zram: fix up permission for the hot_add sysfs file cacheinfo: Add use_arch[|_cache]_info field/function arch_topology: Remove early cacheinfo error message if -ENOENT cacheinfo: Check cache properties are present in DT cacheinfo: Check sib_leaf in cache_leaves_are_shared() cacheinfo: Allow early level detection when DT/ACPI info is missing/broken cacheinfo: Add arm64 early level initializer implementation cacheinfo: Add arch specific early level initializer tty: make tty_class a static const structure driver core: class: remove struct class_interface * from callbacks driver core: class: mark the struct class in struct class_interface constant driver core: class: make class_register() take a const * driver core: class: mark class_release() as taking a const * driver core: remove incorrect comment for device_create* MIPS: vpe-cmp: remove module owner pointer from struct class usage. ... |
||
Bharath SM
|
d906be3fa5 |
SMB3: Close deferred file handles in case of handle lease break
We should not cache deferred file handles if we dont have
handle lease on a file. And we should immediately close all
deferred handles in case of handle lease break.
Fixes:
|
||
|
Bharath SM
|
ab9ddc87a9 |
SMB3: Add missing locks to protect deferred close file list
cifs_del_deferred_close function has a critical section which modifies
the deferred close file list. We must acquire deferred_lock before
calling cifs_del_deferred_close function.
Fixes:
|
||
|
Linus Torvalds
|
6e98b09da9 |
Networking changes for 6.4.
Core
----
- Introduce a config option to tweak MAX_SKB_FRAGS. Increasing the
default value allows for better BIG TCP performances.
- Reduce compound page head access for zero-copy data transfers.
- RPS/RFS improvements, avoiding unneeded NET_RX_SOFTIRQ when possible.
- Threaded NAPI improvements, adding defer skb free support and unneeded
softirq avoidance.
- Address dst_entry reference count scalability issues, via false
sharing avoidance and optimize refcount tracking.
- Add lockless accesses annotation to sk_err[_soft].
- Optimize again the skb struct layout.
- Extends the skb drop reasons to make it usable by multiple
subsystems.
- Better const qualifier awareness for socket casts.
BPF
---
- Add skb and XDP typed dynptrs which allow BPF programs for more
ergonomic and less brittle iteration through data and variable-sized
accesses.
- Add a new BPF netfilter program type and minimal support to hook
BPF programs to netfilter hooks such as prerouting or forward.
- Add more precise memory usage reporting for all BPF map types.
- Adds support for using {FOU,GUE} encap with an ipip device operating
in collect_md mode and add a set of BPF kfuncs for controlling encap
params.
- Allow BPF programs to detect at load time whether a particular kfunc
exists or not, and also add support for this in light skeleton.
- Bigger batch of BPF verifier improvements to prepare for upcoming BPF
open-coded iterators allowing for less restrictive looping capabilities.
- Rework RCU enforcement in the verifier, add kptr_rcu and enforce BPF
programs to NULL-check before passing such pointers into kfunc.
- Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and in
local storage maps.
- Enable RCU semantics for task BPF kptrs and allow referenced kptr
tasks to be stored in BPF maps.
- Add support for refcounted local kptrs to the verifier for allowing
shared ownership, useful for adding a node to both the BPF list and
rbtree.
- Add BPF verifier support for ST instructions in convert_ctx_access()
which will help new -mcpu=v4 clang flag to start emitting them.
- Add ARM32 USDT support to libbpf.
- Improve bpftool's visual program dump which produces the control
flow graph in a DOT format by adding C source inline annotations.
Protocols
---------
- IPv4: Allow adding to IPv4 address a 'protocol' tag. Such value
indicates the provenance of the IP address.
- IPv6: optimize route lookup, dropping unneeded R/W lock acquisition.
- Add the handshake upcall mechanism, allowing the user-space
to implement generic TLS handshake on kernel's behalf.
- Bridge: support per-{Port, VLAN} neighbor suppression, increasing
resilience to nodes failures.
- SCTP: add support for Fair Capacity and Weighted Fair Queueing
schedulers.
- MPTCP: delay first subflow allocation up to its first usage. This
will allow for later better LSM interaction.
- xfrm: Remove inner/outer modes from input/output path. These are
not needed anymore.
- WiFi:
- reduced neighbor report (RNR) handling for AP mode
- HW timestamping support
- support for randomized auth/deauth TA for PASN privacy
- per-link debugfs for multi-link
- TC offload support for mac80211 drivers
- mac80211 mesh fast-xmit and fast-rx support
- enable Wi-Fi 7 (EHT) mesh support
Netfilter
---------
- Add nf_tables 'brouting' support, to force a packet to be routed
instead of being bridged.
- Update bridge netfilter and ovs conntrack helpers to handle
IPv6 Jumbo packets properly, i.e. fetch the packet length
from hop-by-hop extension header. This is needed for BIT TCP
support.
- The iptables 32bit compat interface isn't compiled in by default
anymore.
- Move ip(6)tables builtin icmp matches to the udptcp one.
This has the advantage that icmp/icmpv6 match doesn't load the
iptables/ip6tables modules anymore when iptables-nft is used.
- Extended netlink error report for netdevice in flowtables and
netdev/chains. Allow for incrementally add/delete devices to netdev
basechain. Allow to create netdev chain without device.
Driver API
----------
- Remove redundant Device Control Error Reporting Enable, as PCI core
has already error reporting enabled at enumeration time.
- Move Multicast DB netlink handlers to core, allowing devices other
then bridge to use them.
- Allow the page_pool to directly recycle the pages from safely
localized NAPI.
- Implement lockless TX queue stop/wake combo macros, allowing for
further code de-duplication and sanitization.
- Add YNL support for user headers and struct attrs.
- Add partial YNL specification for devlink.
- Add partial YNL specification for ethtool.
- Add tc-mqprio and tc-taprio support for preemptible traffic classes.
- Add tx push buf len param to ethtool, specifies the maximum number
of bytes of a transmitted packet a driver can push directly to the
underlying device.
- Add basic LED support for switch/phy.
- Add NAPI documentation, stop relaying on external links.
- Convert dsa_master_ioctl() to netdev notifier. This is a preparatory
work to make the hardware timestamping layer selectable by user
space.
- Add transceiver support and improve the error messages for CAN-FD
controllers.
New hardware / drivers
----------------------
- Ethernet:
- AMD/Pensando core device support
- MediaTek MT7981 SoC
- MediaTek MT7988 SoC
- Broadcom BCM53134 embedded switch
- Texas Instruments CPSW9G ethernet switch
- Qualcomm EMAC3 DWMAC ethernet
- StarFive JH7110 SoC
- NXP CBTX ethernet PHY
- WiFi:
- Apple M1 Pro/Max devices
- RealTek rtl8710bu/rtl8188gu
- RealTek rtl8822bs, rtl8822cs and rtl8821cs SDIO chipset
- Bluetooth:
- Realtek RTL8821CS, RTL8851B, RTL8852BS
- Mediatek MT7663, MT7922
- NXP w8997
- Actions Semi ATS2851
- QTI WCN6855
- Marvell 88W8997
- Can:
- STMicroelectronics bxcan stm32f429
Drivers
-------
- Ethernet NICs:
- Intel (1G, icg):
- add tracking and reporting of QBV config errors.
- add support for configuring max SDU for each Tx queue.
- Intel (100G, ice):
- refactor mailbox overflow detection to support Scalable IOV
- GNSS interface optimization
- Intel (i40e):
- support XDP multi-buffer
- nVidia/Mellanox:
- add the support for linux bridge multicast offload
- enable TC offload for egress and engress MACVLAN over bond
- add support for VxLAN GBP encap/decap flows offload
- extend packet offload to fully support libreswan
- support tunnel mode in mlx5 IPsec packet offload
- extend XDP multi-buffer support
- support MACsec VLAN offload
- add support for dynamic msix vectors allocation
- drop RX page_cache and fully use page_pool
- implement thermal zone to report NIC temperature
- Netronome/Corigine:
- add support for multi-zone conntrack offload
- Solarflare/Xilinx:
- support offloading TC VLAN push/pop actions to the MAE
- support TC decap rules
- support unicast PTP
- Other NICs:
- Broadcom (bnxt): enforce software based freq adjustments only
on shared PHC NIC
- RealTek (r8169): refactor to addess ASPM issues during NAPI poll.
- Micrel (lan8841): add support for PTP_PF_PEROUT
- Cadence (macb): enable PTP unicast
- Engleder (tsnep): add XDP socket zero-copy support
- virtio-net: implement exact header length guest feature
- veth: add page_pool support for page recycling
- vxlan: add MDB data path support
- gve: add XDP support for GQI-QPL format
- geneve: accept every ethertype
- macvlan: allow some packets to bypass broadcast queue
- mana: add support for jumbo frame
- Ethernet high-speed switches:
- Microchip (sparx5): Add support for TC flower templates.
- Ethernet embedded switches:
- Broadcom (b54):
- configure 6318 and 63268 RGMII ports
- Marvell (mv88e6xxx):
- faster C45 bus scan
- Microchip:
- lan966x:
- add support for IS1 VCAP
- better TX/RX from/to CPU performances
- ksz9477: add ETS Qdisc support
- ksz8: enhance static MAC table operations and error handling
- sama7g5: add PTP capability
- NXP (ocelot):
- add support for external ports
- add support for preemptible traffic classes
- Texas Instruments:
- add CPSWxG SGMII support for J7200 and J721E
- Intel WiFi (iwlwifi):
- preparation for Wi-Fi 7 EHT and multi-link support
- EHT (Wi-Fi 7) sniffer support
- hardware timestamping support for some devices/firwmares
- TX beacon protection on newer hardware
- Qualcomm 802.11ax WiFi (ath11k):
- MU-MIMO parameters support
- ack signal support for management packets
- RealTek WiFi (rtw88):
- SDIO bus support
- better support for some SDIO devices
(e.g. MAC address from efuse)
- RealTek WiFi (rtw89):
- HW scan support for 8852b
- better support for 6 GHz scanning
- support for various newer firmware APIs
- framework firmware backwards compatibility
- MediaTek WiFi (mt76):
- P2P support
- mesh A-MSDU support
- EHT (Wi-Fi 7) support
- coredump support
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=ITVa
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Introduce a config option to tweak MAX_SKB_FRAGS. Increasing the
default value allows for better BIG TCP performances
- Reduce compound page head access for zero-copy data transfers
- RPS/RFS improvements, avoiding unneeded NET_RX_SOFTIRQ when
possible
- Threaded NAPI improvements, adding defer skb free support and
unneeded softirq avoidance
- Address dst_entry reference count scalability issues, via false
sharing avoidance and optimize refcount tracking
- Add lockless accesses annotation to sk_err[_soft]
- Optimize again the skb struct layout
- Extends the skb drop reasons to make it usable by multiple
subsystems
- Better const qualifier awareness for socket casts
BPF:
- Add skb and XDP typed dynptrs which allow BPF programs for more
ergonomic and less brittle iteration through data and
variable-sized accesses
- Add a new BPF netfilter program type and minimal support to hook
BPF programs to netfilter hooks such as prerouting or forward
- Add more precise memory usage reporting for all BPF map types
- Adds support for using {FOU,GUE} encap with an ipip device
operating in collect_md mode and add a set of BPF kfuncs for
controlling encap params
- Allow BPF programs to detect at load time whether a particular
kfunc exists or not, and also add support for this in light
skeleton
- Bigger batch of BPF verifier improvements to prepare for upcoming
BPF open-coded iterators allowing for less restrictive looping
capabilities
- Rework RCU enforcement in the verifier, add kptr_rcu and enforce
BPF programs to NULL-check before passing such pointers into kfunc
- Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and
in local storage maps
- Enable RCU semantics for task BPF kptrs and allow referenced kptr
tasks to be stored in BPF maps
- Add support for refcounted local kptrs to the verifier for allowing
shared ownership, useful for adding a node to both the BPF list and
rbtree
- Add BPF verifier support for ST instructions in
convert_ctx_access() which will help new -mcpu=v4 clang flag to
start emitting them
- Add ARM32 USDT support to libbpf
- Improve bpftool's visual program dump which produces the control
flow graph in a DOT format by adding C source inline annotations
Protocols:
- IPv4: Allow adding to IPv4 address a 'protocol' tag. Such value
indicates the provenance of the IP address
- IPv6: optimize route lookup, dropping unneeded R/W lock acquisition
- Add the handshake upcall mechanism, allowing the user-space to
implement generic TLS handshake on kernel's behalf
- Bridge: support per-{Port, VLAN} neighbor suppression, increasing
resilience to nodes failures
- SCTP: add support for Fair Capacity and Weighted Fair Queueing
schedulers
- MPTCP: delay first subflow allocation up to its first usage. This
will allow for later better LSM interaction
- xfrm: Remove inner/outer modes from input/output path. These are
not needed anymore
- WiFi:
- reduced neighbor report (RNR) handling for AP mode
- HW timestamping support
- support for randomized auth/deauth TA for PASN privacy
- per-link debugfs for multi-link
- TC offload support for mac80211 drivers
- mac80211 mesh fast-xmit and fast-rx support
- enable Wi-Fi 7 (EHT) mesh support
Netfilter:
- Add nf_tables 'brouting' support, to force a packet to be routed
instead of being bridged
- Update bridge netfilter and ovs conntrack helpers to handle IPv6
Jumbo packets properly, i.e. fetch the packet length from
hop-by-hop extension header. This is needed for BIT TCP support
- The iptables 32bit compat interface isn't compiled in by default
anymore
- Move ip(6)tables builtin icmp matches to the udptcp one. This has
the advantage that icmp/icmpv6 match doesn't load the
iptables/ip6tables modules anymore when iptables-nft is used
- Extended netlink error report for netdevice in flowtables and
netdev/chains. Allow for incrementally add/delete devices to netdev
basechain. Allow to create netdev chain without device
Driver API:
- Remove redundant Device Control Error Reporting Enable, as PCI core
has already error reporting enabled at enumeration time
- Move Multicast DB netlink handlers to core, allowing devices other
then bridge to use them
- Allow the page_pool to directly recycle the pages from safely
localized NAPI
- Implement lockless TX queue stop/wake combo macros, allowing for
further code de-duplication and sanitization
- Add YNL support for user headers and struct attrs
- Add partial YNL specification for devlink
- Add partial YNL specification for ethtool
- Add tc-mqprio and tc-taprio support for preemptible traffic classes
- Add tx push buf len param to ethtool, specifies the maximum number
of bytes of a transmitted packet a driver can push directly to the
underlying device
- Add basic LED support for switch/phy
- Add NAPI documentation, stop relaying on external links
- Convert dsa_master_ioctl() to netdev notifier. This is a
preparatory work to make the hardware timestamping layer selectable
by user space
- Add transceiver support and improve the error messages for CAN-FD
controllers
New hardware / drivers:
- Ethernet:
- AMD/Pensando core device support
- MediaTek MT7981 SoC
- MediaTek MT7988 SoC
- Broadcom BCM53134 embedded switch
- Texas Instruments CPSW9G ethernet switch
- Qualcomm EMAC3 DWMAC ethernet
- StarFive JH7110 SoC
- NXP CBTX ethernet PHY
- WiFi:
- Apple M1 Pro/Max devices
- RealTek rtl8710bu/rtl8188gu
- RealTek rtl8822bs, rtl8822cs and rtl8821cs SDIO chipset
- Bluetooth:
- Realtek RTL8821CS, RTL8851B, RTL8852BS
- Mediatek MT7663, MT7922
- NXP w8997
- Actions Semi ATS2851
- QTI WCN6855
- Marvell 88W8997
- Can:
- STMicroelectronics bxcan stm32f429
Drivers:
- Ethernet NICs:
- Intel (1G, icg):
- add tracking and reporting of QBV config errors
- add support for configuring max SDU for each Tx queue
- Intel (100G, ice):
- refactor mailbox overflow detection to support Scalable IOV
- GNSS interface optimization
- Intel (i40e):
- support XDP multi-buffer
- nVidia/Mellanox:
- add the support for linux bridge multicast offload
- enable TC offload for egress and engress MACVLAN over bond
- add support for VxLAN GBP encap/decap flows offload
- extend packet offload to fully support libreswan
- support tunnel mode in mlx5 IPsec packet offload
- extend XDP multi-buffer support
- support MACsec VLAN offload
- add support for dynamic msix vectors allocation
- drop RX page_cache and fully use page_pool
- implement thermal zone to report NIC temperature
- Netronome/Corigine:
- add support for multi-zone conntrack offload
- Solarflare/Xilinx:
- support offloading TC VLAN push/pop actions to the MAE
- support TC decap rules
- support unicast PTP
- Other NICs:
- Broadcom (bnxt): enforce software based freq adjustments only on
shared PHC NIC
- RealTek (r8169): refactor to addess ASPM issues during NAPI poll
- Micrel (lan8841): add support for PTP_PF_PEROUT
- Cadence (macb): enable PTP unicast
- Engleder (tsnep): add XDP socket zero-copy support
- virtio-net: implement exact header length guest feature
- veth: add page_pool support for page recycling
- vxlan: add MDB data path support
- gve: add XDP support for GQI-QPL format
- geneve: accept every ethertype
- macvlan: allow some packets to bypass broadcast queue
- mana: add support for jumbo frame
- Ethernet high-speed switches:
- Microchip (sparx5): Add support for TC flower templates
- Ethernet embedded switches:
- Broadcom (b54):
- configure 6318 and 63268 RGMII ports
- Marvell (mv88e6xxx):
- faster C45 bus scan
- Microchip:
- lan966x:
- add support for IS1 VCAP
- better TX/RX from/to CPU performances
- ksz9477: add ETS Qdisc support
- ksz8: enhance static MAC table operations and error handling
- sama7g5: add PTP capability
- NXP (ocelot):
- add support for external ports
- add support for preemptible traffic classes
- Texas Instruments:
- add CPSWxG SGMII support for J7200 and J721E
- Intel WiFi (iwlwifi):
- preparation for Wi-Fi 7 EHT and multi-link support
- EHT (Wi-Fi 7) sniffer support
- hardware timestamping support for some devices/firwmares
- TX beacon protection on newer hardware
- Qualcomm 802.11ax WiFi (ath11k):
- MU-MIMO parameters support
- ack signal support for management packets
- RealTek WiFi (rtw88):
- SDIO bus support
- better support for some SDIO devices (e.g. MAC address from
efuse)
- RealTek WiFi (rtw89):
- HW scan support for 8852b
- better support for 6 GHz scanning
- support for various newer firmware APIs
- framework firmware backwards compatibility
- MediaTek WiFi (mt76):
- P2P support
- mesh A-MSDU support
- EHT (Wi-Fi 7) support
- coredump support"
* tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2078 commits)
net: phy: hide the PHYLIB_LEDS knob
net: phy: marvell-88x2222: remove unnecessary (void*) conversions
tcp/udp: Fix memleaks of sk and zerocopy skbs with TX timestamp.
net: amd: Fix link leak when verifying config failed
net: phy: marvell: Fix inconsistent indenting in led_blink_set
lan966x: Don't use xdp_frame when action is XDP_TX
tsnep: Add XDP socket zero-copy TX support
tsnep: Add XDP socket zero-copy RX support
tsnep: Move skb receive action to separate function
tsnep: Add functions for queue enable/disable
tsnep: Rework TX/RX queue initialization
tsnep: Replace modulo operation with mask
net: phy: dp83867: Add led_brightness_set support
net: phy: Fix reading LED reg property
drivers: nfc: nfcsim: remove return value check of `dev_dir`
net: phy: dp83867: Remove unnecessary (void*) conversions
net: ethtool: coalesce: try to make user settings stick twice
net: mana: Check if netdev/napi_alloc_frag returns single page
net: mana: Rename mana_refill_rxoob and remove some empty lines
net: veth: add page_pool stats
...
|
||
Dave Chinner
|
9419092fb2 |
xfs: fix livelock in delayed allocation at ENOSPC
On a filesystem with a non-zero stripe unit and a large sequential
write, delayed allocation will set a minimum allocation length of
the stripe unit. If allocation fails because there are no extents
long enough for an aligned minlen allocation, it is supposed to
fall back to unaligned allocation which allows single block extents
to be allocated.
When the allocator code was rewritting in the 6.3 cycle, this
fallback was broken - the old code used args->fsbno as the both the
allocation target and the allocation result, the new code passes the
target as a separate parameter. The conversion didn't handle the
aligned->unaligned fallback path correctly - it reset args->fsbno to
the target fsbno on failure which broke allocation failure detection
in the high level code and so it never fell back to unaligned
allocations.
This resulted in a loop in writeback trying to allocate an aligned
block, getting a false positive success, trying to insert the result
in the BMBT. This did nothing because the extent already was in the
BMBT (merge results in an unchanged extent) and so it returned the
prior extent to the conversion code as the current iomap.
Because the iomap returned didn't cover the offset we tried to map,
xfs_convert_blocks() then retries the allocation, which fails in the
same way and now we have a livelock.
Reported-and-tested-by: Brian Foster <bfoster@redhat.com>
Fixes:
|
||
|
Linus Torvalds
|
5b9a7bb72f |
for-6.4/io_uring-2023-04-21
-----BEGIN PGP SIGNATURE----- iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmRCvawQHGF4Ym9lQGtl cm5lbC5kawAKCRD301j7KXHgpiKTEACvp0jm3Lyhxb8RMsx5T6Ko0pFH3DIymiL4 xpoZmAUflOjD0c+99FwHRQqKKXuo3OelhW+YOm0N6OOAt6JMSGmKpZh0UNJx+Fgj wMwiQ0X3Y5SaAsr5ZpXM+G1BV7ajihsMpu8/a718ERB3U3cLDz2qJfnzJh+E5Ip5 pYB4vS3+/FAER2MYQ7IPeovch2wWYtxDPztOxNX6SORu3OvpWiz1GR/+8u0tqj50 ROq97Jwjh5Tl4zP356EUSj/Vkfdr2yb+NlLbun8My5x8tYftZjnrNQ/+qeJNLwB8 tWTrg166ox/VX3aYZruAgUPv0IyGPZg7qZV5R72ChBK3VhIbOOLOCm/V6dhvl/XH vu2FG7J8WylWHmc+OU8u7TeSJdrwxTLs4e2IFUBK9ymAYFp0Q9S924fgvSYsFvVB iNn58SPRIbuA4SPtRfCd7pENtZW/QKfBC5CYK+pjsZVX40c9dbe40foVu4t2/EAo gi9+gSWEUVRRW2osxjaHXh78cW63g0j9bNfS6n1Vy32Oo5Mwm7n+bVWqCU5bCBXI MpPOk6AgME3UPwFzGzSmx+PVw8VacPxYP1NF8RFTCwj7OowFnrolJtruDmKJgXWY BN41EDo41k/C5mEu16Jr9rAkHeVhHaNZ+JhyDrzv8llJ/rv+4zEJw9SrhnpufmOX +YERd/ndAw== =Erfk -----END PGP SIGNATURE----- Merge tag 'for-6.4/io_uring-2023-04-21' of git://git.kernel.dk/linux Pull io_uring updates from Jens Axboe: - Cleanup of the io-wq per-node mapping, notably getting rid of it so we just have a single io_wq entry per ring (Breno) - Followup to the above, move accounting to io_wq as well and completely drop struct io_wqe (Gabriel) - Enable KASAN for the internal io_uring caches (Breno) - Add support for multishot timeouts. Some applications use timeouts to wake someone waiting on completion entries, and this makes it a bit easier to just have a recurring timer rather than needing to rearm it every time (David) - Support archs that have shared cache coloring between userspace and the kernel, and hence have strict address requirements for mmap'ing the ring into userspace. This should only be parisc/hppa. (Helge, me) - XFS has supported O_DIRECT writes without needing to lock the inode exclusively for a long time, and ext4 now supports it as well. This is true for the common cases of not extending the file size. Flag the fs as having that feature, and utilize that to avoid serializing those writes in io_uring (me) - Enable completion batching for uring commands (me) - Revert patch adding io_uring restriction to what can be GUP mapped or not. This does not belong in io_uring, as io_uring isn't really special in this regard. Since this is also getting in the way of cleanups and improvements to the GUP code, get rid of if (me) - A few series greatly reducing the complexity of registered resources, like buffers or files. Not only does this clean up the code a lot, the simplified code is also a LOT more efficient (Pavel) - Series optimizing how we wait for events and run task_work related to it (Pavel) - Fixes for file/buffer unregistration with DEFER_TASKRUN (Pavel) - Misc cleanups and improvements (Pavel, me) * tag 'for-6.4/io_uring-2023-04-21' of git://git.kernel.dk/linux: (71 commits) Revert "io_uring/rsrc: disallow multi-source reg buffers" io_uring: add support for multishot timeouts io_uring/rsrc: disassociate nodes and rsrc_data io_uring/rsrc: devirtualise rsrc put callbacks io_uring/rsrc: pass node to io_rsrc_put_work() io_uring/rsrc: inline io_rsrc_put_work() io_uring/rsrc: add empty flag in rsrc_node io_uring/rsrc: merge nodes and io_rsrc_put io_uring/rsrc: infer node from ctx on io_queue_rsrc_removal io_uring/rsrc: remove unused io_rsrc_node::llist io_uring/rsrc: refactor io_queue_rsrc_removal io_uring/rsrc: simplify single file node switching io_uring/rsrc: clean up __io_sqe_buffers_update() io_uring/rsrc: inline switch_start fast path io_uring/rsrc: remove rsrc_data refs io_uring/rsrc: fix DEFER_TASKRUN rsrc quiesce io_uring/rsrc: use wq for quiescing io_uring/rsrc: refactor io_rsrc_ref_quiesce io_uring/rsrc: remove io_rsrc_node::done io_uring/rsrc: use nospec'ed indexes ... |
||
|
Linus Torvalds
|
5c7ecada25 |
f2fs update for 6.4-rc1
In this round, we've mainly modified to support non-power-of-two zone size, which is not required for f2fs by design. In order to avoid arch dependency, we refactored the messy rb_entry structure shared across different extent_cache. In addition to the improvement, we've also fixed several subtle bugs and error cases. Enhancement: - support non-power-of-two zone size for zoned device - remove sharing the rb_entry structure in extent cache - refactor f2fs_gc to call checkpoint in urgent condition - support iopoll Bug fix: - fix potential corruption when moving a directory - fix to avoid use-after-free for cached IPU bio - fix the folio private usage - avoid kernel warnings or panics in the cp_error case - fix to recover quota data correctly - fix some bugs in atomic operations - fix system crash due to lack of free space in LFS - fix null pointer panic in tracepoint in __replace_atomic_write_block - fix iostat lock protection - fix scheduling while atomic in decompression path - preserve direct write semantics when buffering is forced - fix to call f2fs_wait_on_page_writeback() in f2fs_write_raw_pages() -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE00UqedjCtOrGVvQiQBSofoJIUNIFAmRIHMMACgkQQBSofoJI UNI3Mw//eQvxUXaWtCjTJQtXPotaah6ZcvnMMtfl6Cf0Z8Sq4L9q4yQMA16MXbLU zz3cexKXIHTzqWfqFLunaj6cmH/THAY3L3fTkFhE+dx1H2IaFprGLW3H8hW/58tr j9365RPVY2d/3agB1KikTj6FQ5OTGibkZagjsC28VmQ30VLIm+4jnHdIoX92UP+k 87JQ/fbG2XAiHX/ifcVuMXY3++db9jaZahsmhdJ1LNTZzztO241RzrNoBsLcSwSZ DkPgJXARQzFNDRfveRXSbV3ygR9C62pNITtSGC86ZRLyoAmko9se+nMEFH7YEkUy Rhf0Qzq2Gy6ThiVo8ZjuLvNycF0oj3OefX1PQLT6vzkv3Sv4Yij48bN1HqPdYsKH 3hPZd2V7A3o2LCJPPPNjZ/6nuKhrX+kU33FjUrxiYqz7Lt74j70vVEHQ7vSCGkrQ YpQYVXFr1hdejdemCpwgdvcEegNlV0GfqCG5KL1f7jJiGHfvxZnOEJ3x9dCQFTIE xVoWTzw9pbmBkTudrFNVRlX2RSQYSvgLFwUhQ3WE0qNu0mUMP+4E+50iKHYraJ7R W1TajZ+ttUJAnZ076vGGEOxabefEdtReOtdstohcJlDaGm5sI9I9CXQRvY4ZSymW l7ZHY/b+/IzP+/fLEX7DgTnWip37H14FImvjYRGpSEzc6sXiOUU= =qHTl -----END PGP SIGNATURE----- Merge tag 'f2fs-for-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs Pull f2fs update from Jaegeuk Kim: "In this round, we've mainly modified to support non-power-of-two zone size, which is not required for f2fs by design. In order to avoid arch dependency, we refactored the messy rb_entry structure shared across different extent_cache. In addition to the improvement, we've also fixed several subtle bugs and error cases. Enhancements: - support non-power-of-two zone size for zoned device - remove sharing the rb_entry structure in extent cache - refactor f2fs_gc to call checkpoint in urgent condition - support iopoll Bug fixes: - fix potential corruption when moving a directory - fix to avoid use-after-free for cached IPU bio - fix the folio private usage - avoid kernel warnings or panics in the cp_error case - fix to recover quota data correctly - fix some bugs in atomic operations - fix system crash due to lack of free space in LFS - fix null pointer panic in tracepoint in __replace_atomic_write_block - fix iostat lock protection - fix scheduling while atomic in decompression path - preserve direct write semantics when buffering is forced - fix to call f2fs_wait_on_page_writeback() in f2fs_write_raw_pages()" * tag 'f2fs-for-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (52 commits) f2fs: remove unnessary comment in __may_age_extent_tree f2fs: allocate node blocks for atomic write block replacement f2fs: use cow inode data when updating atomic write f2fs: remove power-of-two limitation of zoned device f2fs: allocate trace path buffer from names_cache f2fs: add has_enough_free_secs() f2fs: relax sanity check if checkpoint is corrupted f2fs: refactor f2fs_gc to call checkpoint in urgent condition f2fs: remove folio_detach_private() in .invalidate_folio and .release_folio f2fs: remove bulk remove_proc_entry() and unnecessary kobject_del() f2fs: support iopoll method f2fs: remove batched_trim_sections node description f2fs: fix to check return value of inc_valid_block_count() f2fs: fix to check return value of f2fs_do_truncate_blocks() f2fs: fix passing relative address when discard zones f2fs: fix potential corruption when moving a directory f2fs: add radix_tree_preload_end in error case f2fs: fix to recover quota data correctly f2fs: fix to check readonly condition correctly docs: f2fs: Correct instruction to disable checkpoint ... |
||
|
Linus Torvalds
|
fbfaf03eba |
dlm for 6.4
Remove some unused features (related to lock timeouts) that have been previously scheduled for removal. Fix a bug where the pending callback flag would be incorrectly cleared, which could potentially result in missing a completion callback. Use an unbound workqueue for dlm socket handling so that socket operations can be processed with less delay. Fix possible lockspace join connection errors with large clusters (e.g. over 16 nodes) caused by a small socket backlog setting. Use atomic bit ops for internal flags to help avoid mistakes copying flag values from messages. Fix recently introduced bug where memory for lvb data could be unnecessarily allocated for a lock. -----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJkR/JxAAoJEDgbc8f8gGmq2p0P/j3OcxdOXkx9LVpKdjuAhK/M A4Q46J9Z/Ytl4vT7x6i4x2fZXk8cTOkQZ3TkYMGbIc8LV4FZpO4/pIP+GnSDkmwY 1/AJgauskoewPuCNe+SUCawFMKPhUCXKOXNhyfAHlBS+NS8iIJhVKOP7mOMUawKs 4WiI6fEFBig2z56LHgnAIdzx1UGJ+AE1XlwEca1jVvtMYW03HX9h5Tt1BP1NeAKx oPrYQaUsctHlAI+fo0PnjimGcjXa2av9YNnTHpqVfYw6ntSdriEXQVosX/tcRV8E dVXmQP2Ox20mNRu9vHkAK8x2LQLj7HuwmohdUvvDFp1cIEglbiRdF6IolyhD2Up1 ETeJ5EU/6ktJOHrOewUCTcJoLrAcwmklgj9fzvW7fPN4zNsEUCYgoenuSK8bW+la jDbO26Rh+cMg2pC6Rz8z8azadwTQlFXDjvTDOnmb2jr+tfIEWj/VTWCTQ4Un3EEg 4xJ1dCvlLCRkYoDN3QTF9TxapSTohtjtQl85yrLULhdUWhQuRQd93rHeNgwDf8Ys NUzuL+IR+SEfvVyRezYfdyUBT26ld8pGVzJqlKvXUXTPBypnw9aoGAYhXx3A8fYo QLIz7lc0/pvkWaQ9zNyedf8LDIYCbZuTcMpmTEgLy+q6BTJWS2ZJT5oeNvGvnRw5 Zc7iUmGNQ5XKuVEhtTFA =900J -----END PGP SIGNATURE----- Merge tag 'dlm-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm Pull dlm updates from David Teigland: - Remove some unused features (related to lock timeouts) that have been previously scheduled for removal - Fix a bug where the pending callback flag would be incorrectly cleared, which could potentially result in missing a completion callback - Use an unbound workqueue for dlm socket handling so that socket operations can be processed with less delay - Fix possible lockspace join connection errors with large clusters (e.g. over 16 nodes) caused by a small socket backlog setting - Use atomic bit ops for internal flags to help avoid mistakes copying flag values from messages - Fix recently introduced bug where memory for lvb data could be unnecessarily allocated for a lock * tag 'dlm-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm: fs: dlm: stop unnecessarily filling zero ms_extra bytes fs: dlm: switch lkb_sbflags to atomic ops fs: dlm: rsb hash table flag value to atomic ops fs: dlm: move internal flags to atomic ops fs: dlm: change dflags to use atomic bits fs: dlm: store lkb distributed flags into own value fs: dlm: remove DLM_IFL_LOCAL_MS flag fs: dlm: rename stub to local message flag fs: dlm: remove deprecated code parts DLM: increase socket backlog to avoid hangs with 16 nodes fs: dlm: add unbound flag to dlm_io workqueue fs: dlm: fix DLM_IFL_CB_PENDING gets overwritten |
||
|
Linus Torvalds
|
e0fcc9c68d |
gfs2 fixes
- Fix revoke processing at unmount and on read-only remount. - Refuse reading in inodes with an impossible indirect block height. - Various minor cleanups. -----BEGIN PGP SIGNATURE----- iQJIBAABCAAyFiEEJZs3krPW0xkhLMTc1b+f6wMTZToFAmRH00EUHGFncnVlbmJh QHJlZGhhdC5jb20ACgkQ1b+f6wMTZTpfSw//a0IG/6tVfPwlCPd1qPKN/JbxHQVa 3JtRJXr5+RJ3vIKmJb+AFfEiPHRKgCk28d9hMbW8j3ieKSy/dPJe8ARIZmu8phpK dOSiue87v4Pz6Tz2qpb6KgzUENohsqjTy0mEAEWxxZb7mWxUqj7t057hiEp/9NX6 jXcfoNInMxnf2HX3d11LoHXYOX37xvEjyhbZ4OmPn+xzmYQcfhuO96CTrIOe7lKe U8dbFzDwtoUxYljb16do0OLva/YxaNdH33yCzrixVi9ki1aCIH6A2paznlUCzgF1 wzOhzV3kbz5e4flov34X1Jnd5RVkBmzMMM5bkcJzNg6JOSGL0bLg0PGYiXASAfje KmsNVvq0yMWLLQIr2gMcEVI1IVDxkNKJruizbFfUs/SWHI55eDUZtI5jjA0v0cCw 5HRWialgCNdC9Wd/4HW+DfpztwxR5+j52TCtqgyRGQcGvkNtwGMeGgh9/sreuHhr 7Lod7LpBVmEzlXD97VIcJUcU2vhXtGA25pKXFHCilXh/MdA2UpmBWkVUkNVS/awr ZTzoi/WkUIWLLVHxHruLOoJBWit8Mhnuxh1rlY0WD3wDEbnwCZKX8ziTYIsVvkWc d/xjjafrolC6g1m/RoW3rXO/MLXaE0rRy4nb3MLhwsqaAQyZE6puwo40Kj/xNQqf 68kLauI2QFNpFm8= =l1E9 -----END PGP SIGNATURE----- Merge tag 'gfs2-v6.3-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2 Pull gfs2 updates from Andreas Gruenbacher: - Fix revoke processing at unmount and on read-only remount - Refuse reading in inodes with an impossible indirect block height - Various minor cleanups * tag 'gfs2-v6.3-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: gfs2: gfs2_ail_empty_gl no log flush on error gfs2: Issue message when revokes cannot be written gfs2: Perform second log flush in gfs2_make_fs_ro gfs2: return errors from gfs2_ail_empty_gl gfs2: Move variable assignment behind a null pointer check in inode_go_dump gfs2: Use gfs2_holder_initialized for jindex gfs2: Eliminate gfs2_trim_blocks gfs2: Fix inode height consistency check gfs2: Remove ghs[] from gfs2_unlink gfs2: Remove ghs[] from gfs2_link gfs2: Remove duplicate i_nlink check from gfs2_link() |
||
|
Linus Torvalds
|
85d7ab2463 |
for-6.4-tag
-----BEGIN PGP SIGNATURE-----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=Jt7p
-----END PGP SIGNATURE-----
Merge tag 'for-6.4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"Mostly core changes and cleanups, some notable fixes and two
performance improvements in directory logging.
The IO path cleanups are removing or refactoring old code, scrub main
loop has been completely rewritten also refactoring old code.
There are some changes to non-btrfs code, mostly trivial, the cgroup
punt bio logic is only moved from generic code.
Performance improvements:
- improve logging changes in a directory during one transaction,
avoid iterating over items and reduce lock contention (fsync time
4x lower)
- when logging directory entries during one transaction, reduce
locking of subvolume trees by checking tree-log instead
(improvement in throughput and latency for concurrent access to a
subvolume)
Notable fixes:
- dev-replace:
- properly honor read mode when requested to avoid reading from
source device
- target device won't be used for eventual read repair, this is
unreliable for NODATASUM files
- when there are unpaired (and unrepairable) metadata during
replace, exit early with error and don't try to finish whole
operation
- scrub ioctl properly rejects unknown flags
- fix global block reserve calculations
- fix partial direct io write when there's a page fault in the
middle, iomap will try to continue with partial request but the
btrfs part did not match that, this can lead to zeros written
instead of data
Core changes:
- io path:
- continued cleanups and refactoring around bio handling
- extent io submit path simplifications and cleanups
- flush write path simplifications and cleanups
- rework logic of passing sync mode of bio, with further cleanups
- rewrite scrub code flow, restructure how the stripes are enumerated
and verified in a more unified way
- allow to set lower threshold for block group reclaim in debug mode
to aid zoned mode testing
- remove obsolete time-based delayed ref throttling logic when
truncating items
- DREW locks are not using percpu variables anymore
- more warning fixes (-Wmaybe-uninitialized)
- u64 division simplifications
- error handling improvements
Non-btrfs code changes:
- push cgroup punt bio logic to btrfs code (there was no other user
of that), the functionality can be now selected separately by
BLK_CGROUP_PUNT_BIO
- crc32c_impl removed after removing last uses in btrfs code
- add btrfs_assertfail() to objtool table"
* tag 'for-6.4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (147 commits)
btrfs: mark btrfs_assertfail() __noreturn
btrfs: fix uninitialized variable warnings
btrfs: use log root when iterating over index keys when logging directory
btrfs: avoid iterating over all indexes when logging directory
btrfs: dev-replace: error out if we have unrepaired metadata error during
btrfs: remove pointless loop at btrfs_get_next_valid_item()
btrfs: scrub: reject unsupported scrub flags
btrfs: reinterpret async discard iops_limit=0 as no delay
btrfs: set default discard iops_limit to 1000
btrfs: remove unused raid56 functions which were dedicated for scrub
btrfs: scrub: remove scrub_bio structure
btrfs: scrub: remove scrub_block and scrub_sector structures
btrfs: scrub: remove the old scrub recheck code
btrfs: scrub: remove the old writeback infrastructure
btrfs: scrub: remove scrub_parity structure
btrfs: scrub: use scrub_stripe to implement RAID56 P/Q scrub
btrfs: scrub: switch scrub_simple_mirror() to scrub_stripe infrastructure
btrfs: scrub: introduce helper to queue a stripe for scrub
btrfs: scrub: introduce error reporting functionality for scrub_stripe
btrfs: scrub: introduce a writeback helper for scrub_stripe
...
|
||
|
Linus Torvalds
|
94fc079266 |
\n
-----BEGIN PGP SIGNATURE----- iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAmRHq24ACgkQnJ2qBz9k QNkowggAuyZ313GrAUNDH2Cvu3PE804LpW6k27VxtIxmgtMSZvuOED0fC99Xt+3y SnQrJKfw4HVKIDT2sx3ECaiKa+v1UBMG+KmaZ5u5qLjxfjY8YHy6TbHMwY/NV2Aj jGgJYN+5E9AJqStzuu4C9fUzgOgvi4IzgNX4hp0WbESVk6jbDqW2KGNAv6IRM9ku qDg54aL8W50uDMgUJysqe180SlDgeYGPBg1OfA7xrzMaBpEK3z5+v52ZlpGNguDP MZMGwZgFLCP2R5Z9+zqhyK9UuIHUDNE05y20+Hsm1AxlI0iVVt+CahQ9T/6P9OBT QQ+vnepQR6ORtFBlPCVgyiTQgsO3Tw== =+MkS -----END PGP SIGNATURE----- Merge tag 'fs_for_v6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull ext2, reiserfs, udf, and quota updates from Jan Kara: "A couple of small fixes and cleanups for ext2, udf, reiserfs, and quota. The biggest change is making CONFIG_PRINT_QUOTA_WARNING depend on BROKEN with an outlook for removing it completely in an year or so" * tag 'fs_for_v6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: quota: mark PRINT_QUOTA_WARNING as BROKEN quota: update Kconfig comment reiserfs: remove unused iter variable quota: Use register_sysctl_init() for registering fs_dqstats_table reiserfs: remove unused sched_count variable ext2: remove redundant assignment to pointer end quota: make dquot_set_dqinfo return errors from ->write_info quota: fixup *_write_file_info() to return proper error code quota: simplify two-level sysctl registration for fs_dqstats_table udf: use wrapper i_blocksize() in udf_discard_prealloc() udf: Use folios in udf_adinicb_writepage() ext2: Check block size validity during mount ext2: Correct maximum ext2 filesystem block size |
||
|
Linus Torvalds
|
0cfcde1faf |
There are a number of major cleanups in ext4 this cycle:
* The data=journal writepath has been significantly cleaned up and
simplified, and reduces a large number of data=journal special cases
by Jan Kara.
* Ojaswin Muhoo has replaced linked list used to track extents that
have been used for inode preallocation with a red-black tree in the
multi-block allocator. This improves performance for workloads
which do a large number of random allocating writes.
* Thanks to Kemeng Shi for a lot of cleanup and bug fixes in the
multi-block allocator.
* Matthew wilcox has converted the code paths for reading and writing
ext4 pages to use folios.
* Jason Yan has continued to factor out ext4_fill_super() into smaller
functions for improve ease of maintenance and comprehension.
* Josh Triplett has created an uapi header for ext4 userspace API's.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmRHS3IACgkQ8vlZVpUN
gaNN7AgAnFiWfk4UqKpBsUL5iQKJgf2K4tjlNXgPd6ghNns0IdFEyeWSHhr6KLv/
SQeoMMyiWaUcTvZs9DokD8U/9M1ELPUiE9W5c9GxJjM86SXp8BlLYSZTiRoNHzGJ
noQpvikj4qTRviK0rA3q5ICTP2eh1ECHMFJy2wcsZQgwnBelUejQHsTGtOwSvFWF
8wMdfuVtAFDZJjzOxzVKfHP22R5HVRWlAU7P1d97qKjBj4Se3+QchI+zdcIrmU9A
tTmCXj57NpTDyLjS9dIDmLygtTv93lOzOmZS8glw0BFonPcd3ObI4RHVxR+V9xu1
lN13YYgBrK6yfApn9L5XL/31PuLfbg==
=VLBx
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"There are a number of major cleanups in ext4 this cycle:
- The data=journal writepath has been significantly cleaned up and
simplified, and reduces a large number of data=journal special
cases by Jan Kara.
- Ojaswin Muhoo has replaced linked list used to track extents that
have been used for inode preallocation with a red-black tree in the
multi-block allocator. This improves performance for workloads
which do a large number of random allocating writes.
- Thanks to Kemeng Shi for a lot of cleanup and bug fixes in the
multi-block allocator.
- Matthew wilcox has converted the code paths for reading and writing
ext4 pages to use folios.
- Jason Yan has continued to factor out ext4_fill_super() into
smaller functions for improve ease of maintenance and
comprehension.
- Josh Triplett has created an uapi header for ext4 userspace API's"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (105 commits)
ext4: Add a uapi header for ext4 userspace APIs
ext4: remove useless conditional branch code
ext4: remove unneeded check of nr_to_submit
ext4: move dax and encrypt checking into ext4_check_feature_compatibility()
ext4: factor out ext4_block_group_meta_init()
ext4: move s_reserved_gdt_blocks and addressable checking into ext4_check_geometry()
ext4: rename two functions with 'check'
ext4: factor out ext4_flex_groups_free()
ext4: use ext4_group_desc_free() in ext4_put_super() to save some duplicated code
ext4: factor out ext4_percpu_param_init() and ext4_percpu_param_destroy()
ext4: factor out ext4_hash_info_init()
Revert "ext4: Fix warnings when freezing filesystem with journaled data"
ext4: Update comment in mpage_prepare_extent_to_map()
ext4: Simplify handling of journalled data in ext4_bmap()
ext4: Drop special handling of journalled data from ext4_quota_on()
ext4: Drop special handling of journalled data from ext4_evict_inode()
ext4: Fix special handling of journalled data from extent zeroing
ext4: Drop special handling of journalled data from extent shifting operations
ext4: Drop special handling of journalled data from ext4_sync_file()
ext4: Commit transaction before writing back pages in data=journal mode
...
|
||
|
Linus Torvalds
|
c3558a6b2a |
fsverity updates for 6.4
Several cleanups and fixes for fs/verity/, including a couple minor fixes to the changes in 6.3 that added support for Merkle tree block sizes less than the page size. -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCZEdweBQcZWJpZ2dlcnNA Z29vZ2xlLmNvbQAKCRDzXCl4vpKOK8EDAP91ondqa2EZ9C87NsBby+lPdo+wkekh VQ4EMxrg1yhUXQD/fvOp+NeSpnqW8BG3Q78KI7Rgvrpr6CtBF4Lfg4jsWQo= =EEFA -----END PGP SIGNATURE----- Merge tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux Pull fsverity updates from Eric Biggers: "Several cleanups and fixes for fs/verity/, including a couple minor fixes to the changes in 6.3 that added support for Merkle tree block sizes less than the page size" * tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux: fsverity: reject FS_IOC_ENABLE_VERITY on mode 3 fds fsverity: explicitly check for buffer overflow in build_merkle_tree() fsverity: use WARN_ON_ONCE instead of WARN_ON fs-verity: simplify sysctls with register_sysctl() fs/buffer.c: use b_folio for fsverity work |
||
|
Linus Torvalds
|
dbe0e78d0e |
fscrypt updates for 6.4
A few cleanups for fs/crypto/, and another patch to prepare for the upcoming CephFS encryption support. -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCZEdv1xQcZWJpZ2dlcnNA Z29vZ2xlLmNvbQAKCRDzXCl4vpKOK/jyAPwNyGlOQGuiFwsu8Mjtppkx4NUHK83K gp0N/aT2So6C4wD+IlqDVXiTinnmKOoMs/orBsML4Ub/8etuZZDGu4FipgY= =X+dx -----END PGP SIGNATURE----- Merge tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux Pull fscrypt updates from Eric Biggers: "A few cleanups for fs/crypto/, and another patch to prepare for the upcoming CephFS encryption support" * tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux: fscrypt: optimize fscrypt_initialize() fscrypt: use WARN_ON_ONCE instead of WARN_ON fscrypt: new helper function - fscrypt_prepare_lookup_partial() fs/buffer.c: use b_folio for fscrypt work |
||
Jeff Layton
|
92e4a6733f |
nfsd: simplify the delayed disposal list code
When queueing a dispose list to the appropriate "freeme" lists, it pointlessly queues the objects one at a time to an intermediate list. Remove a few helpers and just open code a list_move to make it more clear and efficient. Better document the resulting functions with kerneldoc comments. Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> |
||
|
Chuck Lever
|
0f5162480b |
NFSD: Watch for rq_pages bounds checking errors in nfsd_splice_actor()
There have been several bugs over the years where the NFSD splice actor has attempted to write outside the rq_pages array. This is a "should never happen" condition, but if for some reason the pipe splice actor should attempt to walk past the end of rq_pages, it needs to terminate the READ operation to prevent corruption of the pointer addresses in the fields just beyond the array. A server crash is thus prevented. Since the code is not behaving, the READ operation returns -EIO to the client. None of the READ payload data can be trusted if the splice actor isn't operating as expected. Suggested-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> |
||
NeilBrown
|
cf64b9bce9 |
SUNRPC: return proper error from get_expiry()
The get_expiry() function currently returns a timestamp, and uses the special return value of 0 to indicate an error. Unfortunately this causes a problem when 0 is the correct return value. On a system with no RTC it is possible that the boot time will be seen to be "3". When exportfs probes to see if a particular filesystem supports NFS export it tries to cache information with an expiry time of "3". The intention is for this to be "long in the past". Even with no RTC it will not be far in the future (at most a second or two) so this is harmless. But if the boot time happens to have been calculated to be "3", then get_expiry will fail incorrectly as it converts the number to "seconds since bootime" - 0. To avoid this problem we change get_expiry() to report the error quite separately from the expiry time. The error is now the return value. The expiry time is reported through a by-reference parameter. Reported-by: Jerry Zhang <jerry@skydio.com> Tested-by: Jerry Zhang <jerry@skydio.com> Signed-off-by: NeilBrown <neilb@suse.de> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> |
||
|
Jeff Layton
|
2f90e18ffe |
lockd: add some client-side tracepoints
Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> |
||
|
Jeff Layton
|
e59fb6749e |
nfs: move nfs_fhandle_hash to common include file
lockd needs to be able to hash filehandles for tracepoints. Move the nfs_fhandle_hash() helper to a common nfs include file. Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> |
||
|
Jeff Layton
|
244cc19196 |
lockd: server should unlock lock if client rejects the grant
Currently lockd just dequeues the block and ignores it if the client sends a GRANT_RES with a status of nlm_lck_denied. That status is an indicator that the client has rejected the lock, so the right thing to do is to unlock the lock we were trying to grant. Reported-by: Yongcheng Yang <yoyang@redhat.com> Link: https://bugzilla.redhat.com/show_bug.cgi?id=2063818 Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> |
||
|
Jeff Layton
|
2005f5b9c3 |
lockd: fix races in client GRANTED_MSG wait logic
After the wait for a grant is done (for whatever reason), nlmclnt_block updates the status of the nlm_rqst with the status of the block. At the point it does this, however, the block is still queued its status could change at any time. This is particularly a problem when the waiting task is signaled during the wait. We can end up giving up on the lock just before the GRANTED_MSG callback comes in, and accept it even though the lock request gets back an error, leaving a dangling lock on the server. Since the nlm_wait never lives beyond the end of nlmclnt_lock, put it on the stack and add functions to allow us to enqueue and dequeue the block. Enqueue it just before the lock/wait loop, and dequeue it just after we exit the loop instead of waiting until the end of the function. Also, scrape the status at the time that we dequeue it to ensure that it's final. Reported-by: Yongcheng Yang <yoyang@redhat.com> Link: https://bugzilla.redhat.com/show_bug.cgi?id=2063818 Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> |
||
|
Jeff Layton
|
f0aa4852e6 |
lockd: move struct nlm_wait to lockd.h
The next patch needs struct nlm_wait in fs/lockd/clntproc.c, so move the definition to a shared header file. As an added clean-up, drop the unused b_reclaim field. Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> |
||
|
Jeff Layton
|
bfca7a6f0c |
lockd: purge resources held on behalf of nlm clients when shutting down
It's easily possible for the server to have an outstanding lock when we
go to shut down. When that happens, we often get a warning like this in
the kernel log:
lockd: couldn't shutdown host module for net f0000000!
This is because the shutdown procedures skip removing any hosts that
still have outstanding resources (locks). Eventually, things seem to get
cleaned up anyway, but the log message is unsettling, and server
shutdown doesn't seem to be working the way it was intended.
Ensure that we tear down any resources held on behalf of a client when
tearing one down for server shutdown.
Reported-by: Yongcheng Yang <yoyang@redhat.com>
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2063818
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
||
|
Chuck Lever
|
c4c649ab41 |
NFSD: Convert filecache to rhltable
While we were converting the nfs4_file hashtable to use the kernel's resizable hashtable data structure, Neil Brown observed that the list variant (rhltable) would be better for managing nfsd_file items as well. The nfsd_file hash table will contain multiple entries for the same inode -- these should be kept together on a list. And, it could be possible for exotic or malicious client behavior to cause the hash table to resize itself on every insertion. A nice simplification is that rhltable_lookup() can return a list that contains only nfsd_file items that match a given inode, which enables us to eliminate specialized hash table helper functions and use the default functions provided by the rhashtable implementation). Since we are now storing nfsd_file items for the same inode on a single list, that effectively reduces the number of hash entries that have to be tracked in the hash table. The mininum bucket count is therefore lowered. Light testing with fstests generic/531 show no regressions. Suggested-by: Neil Brown <neilb@suse.de> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> |
||
|
Jeff Layton
|
dcb779fcd4 |
nfsd: allow reaping files still under writeback
On most filesystems, there is no reason to delay reaping an nfsd_file just because its underlying inode is still under writeback. nfsd just relies on client activity or the local flusher threads to do writeback. The main exception is NFS, which flushes all of its dirty data on last close. Add a new EXPORT_OP_FLUSH_ON_CLOSE flag to allow filesystems to signal that they do this, and only skip closing files under writeback on such filesystems. Also, remove a redundant NULL file pointer check in nfsd_file_check_writeback, and clean up nfs's export op flag definitions. Signed-off-by: Jeff Layton <jlayton@kernel.org> Acked-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> |
||
|
Jeff Layton
|
972cc0e092 |
nfsd: update comment over __nfsd_file_cache_purge
Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> |
||
|
Jeff Layton
|
b2ff1bd71d |
nfsd: don't take/put an extra reference when putting a file
The last thing that filp_close does is an fput, so don't bother taking and putting the extra reference. Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> |
||
|
Jeff Layton
|
b680cb9b73 |
nfsd: add some comments to nfsd_file_do_acquire
David Howells mentioned that he found this bit of code confusing, so sprinkle in some comments to clarify. Reported-by: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> |
||
|
Jeff Layton
|
c6593366c0 |
nfsd: don't kill nfsd_files because of lease break error
An error from break_lease is non-fatal, so we needn't destroy the nfsd_file in that case. Just put the reference like we normally would and return the error. Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> |
||
|
Jeff Layton
|
d69b8dbfd0 |
nfsd: simplify test_bit return in NFSD_FILE_KEY_FULL comparator
test_bit returns bool, so we can just compare the result of that to the key->gc value without the "!!". Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> |
||
|
Jeff Layton
|
6c31e4c988 |
nfsd: NFSD_FILE_KEY_INODE only needs to find GC'ed entries
Since v4 files are expected to be long-lived, there's little value in closing them out of the cache when there is conflicting access. Change the comparator to also match the gc value in the key. Change both of the current users of that key to set the gc value in the key to "true". Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> |
||
|
Jeff Layton
|
b8bea9f6cd |
nfsd: don't open-code clear_and_wake_up_bit
Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> |
||
Paolo Abeni
|
c248b27cfc |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
No conflicts. Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
Jens Axboe
|
afed6271f5 |
pipe: set FMODE_NOWAIT on pipes
Pipes themselves do not hold the the pipe lock across IO, and hence are safe for RWF_NOWAIT/IOCB_NOWAIT usage. The "contract" for NOWAIT is really "should not do IO under this lock", not strictly that we cannot block or that the below code is in any way atomic. Pipes fulfil that criteria. Acked-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Jens Axboe
|
0f99fc513d |
splice: clear FMODE_NOWAIT on file if splice/vmsplice is used
In preparation for pipes setting FMODE_NOWAIT on pipes to indicate that RWF_NOWAIT/IOCB_NOWAIT is fully supported, have splice and vmsplice clear that file flag. Splice holds the pipe lock around IO and cannot easily be refactored to avoid that, as splice and pipes are inherently tied together. By clearing FMODE_NOWAIT if splice is being used on a pipe, other users of the pipe will know that the pipe is no longer safe for RWF_NOWAIT and friends. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Linus Torvalds
|
736b378b29 |
slab changes for 6.4
-----BEGIN PGP SIGNATURE----- iQEzBAABCAAdFiEEe7vIQRWZI0iWSE3xu+CwddJFiJoFAmRCSGEACgkQu+CwddJF iJpA2wgAkwMP++Znd8JU3iQ4N53lv18euNuEMLTOY+jk7zXHvsRX8KyzLmsohUKO SSGVi1Om785AidOsJhARJawW7AWYuJ5l7ri+FyskTwrTUcMC4UZ/IT2tB22lRsXi 0f3lgbdArZbj7aq7AVO9N7bh9rgVUHa/RHIwXzMp0sc9nekne9t+FFv7tyRnr7cc SMp/FdMZqbt9pVf0Uwud1BpdgER7QqQaSfaxITL7D2oJTePRZVWiXerrr4hMcQl1 s6kgUgKdlaYmIx2N8eP1Nmp7undtwHo1C8dLLWKGCEuEAaXIxtXUtaUWFFmBDzH9 Fv6qswNFcfwiLNPsY+xi9iA+vlGKAg== =T0EM -----END PGP SIGNATURE----- Merge tag 'slab-for-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab Pull slab updates from Vlastimil Babka: "The main change is naturally the SLOB removal. Since its deprecation in 6.2 I've seen no complaints so hopefully SLUB_(TINY) works well for everyone and we can proceed. Besides the code cleanup, the main immediate benefit will be allowing kfree() family of function to work on kmem_cache_alloc() objects, which was incompatible with SLOB. This includes kfree_rcu() which had no kmem_cache_free_rcu() counterpart yet and now it shouldn't be necessary anymore. Besides that, there are several small code and comment improvements from Thomas, Thorsten and Vernon" * tag 'slab-for-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab: mm/slab: document kfree() as allowed for kmem_cache_alloc() objects mm/slob: remove slob.c mm/slab: remove CONFIG_SLOB code from slab common code mm, pagemap: remove SLOB and SLQB from comments and documentation mm, page_flags: remove PG_slob_free mm/slob: remove CONFIG_SLOB mm/slub: fix help comment of SLUB_DEBUG mm: slub: make kobj_type structure constant slab: Adjust comment after refactoring of gfp.h |
||
|
Linus Torvalds
|
53b5e72b9d |
asm-generic updates for 6.4
These are various cleanups, fixing a number of uapi header files to no longer reference CONFIG_* symbols, and one patch that introduces the new CONFIG_HAS_IOPORT symbol for architectures that provide working inb()/outb() macros, as a preparation for adding driver dependencies on those in the following release. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmRG8IkACgkQYKtH/8kJ Uid15Q/9E/neIIEqEk6IvtyhUicrJiIZUM0rGoYtWXiz75ggk6Kx9+3I+j8zIQ/E kf2TzAG7q9Md7nfTDFLr4FSr0IcNDj+VG4nYxUyDHdKGcARO+g9Kpdvscxip3lgU Rw5w74Gyd30u4iUKGS39OYuxcCgl9LaFjMA9Gh402Oiaoh+OYLmgQS9h/goUD5KN Nd+AoFvkdbnHl0/SpxthLRyL5rFEATBmAY7apYViPyMvfjS3gfDJwXJR9jkKgi6X Qs4t8Op8BA3h84dCuo6VcFqgAJs2Wiq3nyTSUnkF8NxJ2RFTpeiVgfsLOzXHeDgz SKDB4Lp14o3mlyZyj00MWq1uMJRRetUgNiVb6iHOoKQ/E4demBdh+mhIFRybjM5B XNTWFcg9PWFCMa4W9jnLfZBc881X4+7T+qUF8I0W/1AbRJUmyGj8HO6jLceC4yGD UYLn5oFPM6OWXHp6DqJrCr9Yw8h6fuviQZFEbl/ARlgVGt+J4KbYweJYk8DzfX6t PZIj8LskOqyIpRuC2oDA1PHxkaJ1/z+N5oRBHq1uicSh4fxY5HW7HnyzgF08+R3k cf+fjAhC3TfGusHkBwQKQJvpxrxZjPuvYXDZ0GxTvNKJRB8eMeiTm1n41E5oTVwQ swSblSCjZj/fMVVPXLcjxEW4SBNWRxa9Lz3tIPXb3RheU10Lfy8= =H3k4 -----END PGP SIGNATURE----- Merge tag 'asm-generic-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic updates from Arnd Bergmann: "These are various cleanups, fixing a number of uapi header files to no longer reference CONFIG_* symbols, and one patch that introduces the new CONFIG_HAS_IOPORT symbol for architectures that provide working inb()/outb() macros, as a preparation for adding driver dependencies on those in the following release" * tag 'asm-generic-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: Kconfig: introduce HAS_IOPORT option and select it as necessary scripts: Update the CONFIG_* ignore list in headers_install.sh pktcdvd: Remove CONFIG_CDROM_PKTCDVD_WCACHE from uapi header Move bp_type_idx to include/linux/hw_breakpoint.h Move ep_take_care_of_epollwakeup() to fs/eventpoll.c Move COMPAT_ATM_ADDPARTY to net/atm/svc.c |
||
Jan Kara
|
c915d8f591 |
inotify: Avoid reporting event with invalid wd
When inotify_freeing_mark() races with inotify_handle_inode_event() it
can happen that inotify_handle_inode_event() sees that i_mark->wd got
already reset to -1 and reports this value to userspace which can
confuse the inotify listener. Avoid the problem by validating that wd is
sensible (and pretend the mark got removed before the event got
generated otherwise).
CC: stable@vger.kernel.org
Fixes:
|
||
Bob Peterson
|
644f6bf762 |
gfs2: gfs2_ail_empty_gl no log flush on error
Before this patch, function gfs2_ail_empty_gl called gfs2_log_flush even in cases where it encountered an error. It should probably skip the log flush and leave the file system in an inconsistent state, letting a subsequent withdraw force the journal to be replayed to reestablish metadata consistency. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> |
||
|
Bob Peterson
|
b97e583caa |
gfs2: Issue message when revokes cannot be written
Before this patch, function gfs2_ail_empty_gl would silently return an error to the caller. This would get silently set into sd_log_error which would cause a withdraw, but there was no indication why the file system was withdrawn. This patch adds a fs_err to log the appropriate error message. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> |
||
|
Bob Peterson
|
68ca088dc1 |
gfs2: Perform second log flush in gfs2_make_fs_ro
Before this patch, function gfs2_make_fs_ro called gfs2_log_flush once to
finalize the log. However, if there's dirty metadata, log flushes tend
to sync the metadata and formulate revokes. Before this patch, those
revokes may not be written out to the journal immediately, which meant
unresolved glocks could still have revokes in their ail lists. When the
glock worker runs, it tries to transition the glock, but the unresolved
revokes in the ail still need to be written, so it tries to start a
transaction. It's impossible to start a transaction because at that
point, the SDF_JOURNAL_LIVE flag has been cleared by gfs2_make_fs_ro.
That causes the glock worker to fail, unable to write the revokes. The
calling sequence looked something like this:
gfs2_make_fs_ro
gfs2_log_flush - with GFS2_LOG_HEAD_FLUSH_SHUTDOWN flag set
if (flags & GFS2_LOG_HEAD_FLUSH_SHUTDOWN)
clear_bit(SDF_JOURNAL_LIVE, &sdp->sd_flags);
...meanwhile...
glock_work_func
do_xmote
rgrp_go_sync (or possibly inode_go_sync)
...
gfs2_ail_empty_gl
__gfs2_trans_begin
if (unlikely(!test_bit(SDF_JOURNAL_LIVE, &sdp->sd_flags))) {
...
return -EROFS;
The previous patch in the series ("gfs2: return errors from
gfs2_ail_empty_gl") now causes the transaction error to no longer be
ignored, so it causes a warning from MOST of the xfstests:
WARNING: CPU: 11 PID: X at fs/gfs2/super.c:603 gfs2_put_super [gfs2]
which corresponds to:
WARN_ON(gfs2_withdrawing(sdp));
The withdraw was triggered silently from do_xmote by:
if (unlikely(sdp->sd_log_error && !gfs2_withdrawn(sdp)))
gfs2_withdraw_delayed(sdp);
This patch adds a second log_flush to gfs2_make_fs_ro: one to sync the
data and one to sync any outstanding revokes and finalize the journal.
Note that both of these log flushes need to be "special," in other
words, not GFS2_LOG_HEAD_FLUSH_NORMAL.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
||
|
Bob Peterson
|
24ab158298 |
gfs2: return errors from gfs2_ail_empty_gl
Before this patch, function gfs2_ail_empty_gl did not return errors it encountered from __gfs2_trans_begin. Those errors usually came from the fact that the file system was made read-only, often due to unmount (but theoretically could be due to -o remount,ro), which prevented the transaction from starting. The inability to start a transaction prevented its revokes from being properly written to the journal for glocks during unmount (and transition to ro). That meant glocks could be unlocked without the metadata properly revoked in the journal. So other nodes could grab the glock thinking that their lvb values were correct, but in fact corresponded to the glock without its revokes properly synced. That presented as lvb mismatch errors. This patch allows gfs2_ail_empty_gl to return the error properly to the caller. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> |
||
|
Linus Torvalds
|
181b69dd6e |
misc pile
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZEYC7AAKCRBZ7Krx/gZQ 66NCAP9khf7D5Clz5BsUjlsYoXpBPDaSGhVnpAR8mRQ4/Y8eRQD/dyBVt0FuU72Y j1w/foMeP3195Bfdp7UwwZLSU+hbxgw= =M/uq -----END PGP SIGNATURE----- Merge tag 'pull-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull misc vfs pile from Al Viro. Random minor cleanups. * tag 'pull-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fs: Fix description of vfs_tmpfile() sysv: switch to put_and_unmap_page() fs/sysv: Don't round down address for kunmap_flush_on_unmap() |
||
|
Linus Torvalds
|
11b32219cb |
legacy direct-io cleanup
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZEYDPAAKCRBZ7Krx/gZQ 65qvAQC60ak71gAqOSktR93GXYrQ5Q8hbpug7t3lzDQE9huGqgEAl0Zvr8d5ir3j y0X5U5Yl6bcUSQDd4VY76C+53yIKZQs= =rKXE -----END PGP SIGNATURE----- Merge tag 'pull-old-dio' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull legacy dio cleanup from Al Viro. * tag 'pull-old-dio' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: __blockdev_direct_IO(): get rid of submit_io callback |
||
|
Linus Torvalds
|
0e497ad525 |
write_one_page series
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZEYC0gAKCRBZ7Krx/gZQ 6+N5AQCERtd5I2RLm7URX0kurwOthe7o+DX4Lj7y/mcjZV2N4gEAu9VrgHBIuLev +KuGGY0VnKwCtcgGcGGNBrfrRjyKugs= =gDk0 -----END PGP SIGNATURE----- Merge tag 'pull-write-one-page' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs write_one_page removal from Al Viro: "write_one_page series" * tag 'pull-write-one-page' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: mm,jfs: move write_one_page/folio_write_one to jfs ocfs2: don't use write_one_page in ocfs2_duplicate_clusters_by_page ufs: don't flush page immediately for DIRSYNC directories |
||
|
Linus Torvalds
|
ef36b9afc2 |
fget() to fdget() conversions
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZEYCQAAKCRBZ7Krx/gZQ 64FdAQDZ2hTDyZEWPt486dWYPYpiKyaGFXSXDGo7wgP0fiwxXQEA/mROKb6JqYw6 27mZ9A7qluT8r3AfTTQ0D+Yse/dr4AM= =GA9W -----END PGP SIGNATURE----- Merge tag 'pull-fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs fget updates from Al Viro: "fget() to fdget() conversions" * tag 'pull-fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fuse_dev_ioctl(): switch to fdget() cgroup_get_from_fd(): switch to fdget_raw() bpf: switch to fdget_raw() build_mount_idmapped(): switch to fdget() kill the last remaining user of proc_ns_fget() SVM-SEV: convert the rest of fget() uses to fdget() in there convert sgx_set_attribute() to fdget()/fdput() convert setns(2) to fdget()/fdput() |
||
|
Linus Torvalds
|
61d325dcbc |
Changes since last update:
- Add sub-page block size support for uncompressed files;
- Support flattened block device for multi-blob images to be attached
into virtual machines (including cloud servers) and bare metals;
- Support long xattr name prefixes to optimize images with common
xattr namespaces (e.g. files with overlayfs xattrs) use cases;
- Various minor cleanups & fixes.
-----BEGIN PGP SIGNATURE-----
iIcEABYIAC8WIQThPAmQN9sSA0DVxtI5NzHcH7XmBAUCZETCNREceGlhbmdAa2Vy
bmVsLm9yZwAKCRA5NzHcH7XmBJCMAP9VkAPycbbqa6qWUASdyh/HGyuLJTHSfmsJ
zO4y6hBgOwD9GXg55sY8ycvcOx9ayaUt5V5f9zhs4wdGcoPhj5fWzgA=
=nUva
-----END PGP SIGNATURE-----
Merge tag 'erofs-for-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs updates from Gao Xiang:
"In this cycle, sub-page block support for uncompressed files is
available. It's mainly used to enable original signing ('golden')
4k-block images on arm64 with 16/64k pages. In addition, end users
could also use this feature to build a manifest to directly refer to
golden tar data.
Besides, long xattr name prefix support is also introduced in this
cycle to avoid too many xattrs with the same prefix (e.g. overlayfs
xattrs). It's useful for erofs + overlayfs combination (like Composefs
model): the image size is reduced by ~14% and runtime performance is
also slightly improved.
Others are random fixes and cleanups as usual.
Summary:
- Add sub-page block size support for uncompressed files
- Support flattened block device for multi-blob images to be attached
into virtual machines (including cloud servers) and bare metals
- Support long xattr name prefixes to optimize images with common
xattr namespaces (e.g. files with overlayfs xattrs) use cases
- Various minor cleanups & fixes"
* tag 'erofs-for-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: cleanup i_format-related stuffs
erofs: sunset erofs_dbg()
erofs: fix potential overflow calculating xattr_isize
erofs: get rid of z_erofs_fill_inode()
erofs: enable long extended attribute name prefixes
erofs: handle long xattr name prefixes properly
erofs: add helpers to load long xattr name prefixes
erofs: introduce on-disk format for long xattr name prefixes
erofs: move packed inode out of the compression part
erofs: keep meta inode into erofs_buf
erofs: initialize packed inode after root inode is assigned
erofs: stop parsing non-compact HEAD index if clusterofs is invalid
erofs: don't warn ztailpacking feature anymore
erofs: simplify erofs_xattr_generic_get()
erofs: rename init_inode_xattrs with erofs_ prefix
erofs: move several xattr helpers into xattr.c
erofs: tidy up EROFS on-disk naming
erofs: support flattened block device for multi-blob images
erofs: set block size to the on-disk block size
erofs: avoid hardcoded blocksize for subpage block support
|
||
|
Linus Torvalds
|
97adb49f05 |
v6.4/vfs.open
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZEEn8AAKCRCRxhvAZXjc
okJoAQC1bjJp4SQw7VQhTuyv0Ak67PACwKPNUPQyHcqMV5s5DAD/fcnMjq7+UieH
TEk/zRBGWWI8m0wb51MMO+VVM2GeXwI=
=EKj/
-----END PGP SIGNATURE-----
Merge tag 'v6.4/vfs.open' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs open fixlet from Christian Brauner:
"EINVAL ist keinmal: This contains the changes to make O_DIRECTORY when
specified together with O_CREAT an invalid request.
The wider background is that a regression report about the behavior of
O_DIRECTORY | O_CREAT was sent to fsdevel about a behavior that was
changed multiple years and LTS releases earlier during v5.7
development.
This has also been covered in
https://lwn.net/Articles/926782/
which provides an excellent summary of the discussion"
* tag 'v6.4/vfs.open' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
open: return EINVAL for O_DIRECTORY | O_CREAT
|
||
|
Linus Torvalds
|
e2eff52ce5 |
v6.4/vfs.misc
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZEJxiQAKCRCRxhvAZXjc
oj4jAP4pt/SuHdZQzv9k2j+UA4hpDmwt7UUWhLxtycQrt9oEoQD/U9hCwnYY9Ksj
5TSZiK/OGyoslmF1zfAC+1R2crgr3A0=
=PpBS
-----END PGP SIGNATURE-----
Merge tag 'v6.4/vfs.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"This contains a pile of various smaller fixes. Most of them aren't
very interesting so this just highlights things worth mentioning:
- Various filesystems contained the same little helper to convert
from the mode of a dentry to the DT_* type of that dentry.
They have now all been switched to rely on the generic
fs_umode_to_dtype() helper. All custom helpers are removed (Jeff)
- Fsnotify now reports ACCESS and MODIFY events for splice
(Chung-Chiang Cheng)
- After converting timerfd a long time ago to rely on
wait_event_interruptible_*() apis, convert eventfd as well. This
removes the complex open-coded wait code (Wen Yang)
- Simplify sysctl registration for devpts, avoiding the declaration
of two tables. Instead, just use a prefixed path with
register_sysctl() (Luis)
- The setattr_should_drop_sgid() helper is now exported so NFS can
use it. By switching NFS to this helper an NFS setgid inheritance
bug is fixed (me)"
* tag 'v6.4/vfs.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: hfsplus: remove WARN_ON() from hfsplus_cat_{read,write}_inode()
pnode: pass mountpoint directly
eventfd: use wait_event_interruptible_locked_irq() helper
splice: report related fsnotify events
fs: consolidate duplicate dt_type helpers
nfs: use vfs setgid helper
Update relatime comments to include equality
fs/buffer: Remove redundant assignment to err
fs_context: drop the unused lsm_flags member
fs/namespace: fnic: Switch to use %ptTd
Documentation: update idmappings.rst
devpts: simplify two-level sysctl registration for pty_kern_table
eventpoll: align comment with nested epoll limitation
|
||
|
Linus Torvalds
|
7bcff5a396 |
v6.4/vfs.acl
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZEEhwgAKCRCRxhvAZXjc
otwgAQDXHnKiPm/d76lITXbxdUNCtvZz+ig26EbOrD+vEszzIQEA81dru0QbCNCt
ctoZdcsmtKbt2VaYQF1CDOhlnNg5VQM=
=pER1
-----END PGP SIGNATURE-----
Merge tag 'v6.4/vfs.acl' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull acl updates from Christian Brauner:
"After finishing the introduction of the new posix acl api last cycle
the generic POSIX ACL xattr handlers are still around in the
filesystems xattr handlers for two reasons:
(1) Because a few filesystems rely on the ->list() method of the
generic POSIX ACL xattr handlers in their ->listxattr() inode
operation.
(2) POSIX ACLs are only available if IOP_XATTR is raised. The
IOP_XATTR flag is raised in inode_init_always() based on whether
the sb->s_xattr pointer is non-NULL. IOW, the registered xattr
handlers of the filesystem are used to raise IOP_XATTR. Removing
the generic POSIX ACL xattr handlers from all filesystems would
risk regressing filesystems that only implement POSIX ACL support
and no other xattrs (nfs3 comes to mind).
This contains the work to decouple POSIX ACLs from the IOP_XATTR flag
as they don't depend on xattr handlers anymore. So it's now possible
to remove the generic POSIX ACL xattr handlers from the sb->s_xattr
list of all filesystems. This is a crucial step as the generic POSIX
ACL xattr handlers aren't used for POSIX ACLs anymore and POSIX ACLs
don't depend on the xattr infrastructure anymore.
Adressing problem (1) will require more long-term work. It would be
best to get rid of the ->list() method of xattr handlers completely at
some point.
For erofs, ext{2,4}, f2fs, jffs2, ocfs2, and reiserfs the nop POSIX
ACL xattr handler is kept around so they can continue to use
array-based xattr handler indexing.
This update does simplify the ->listxattr() implementation of all
these filesystems however"
* tag 'v6.4/vfs.acl' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
acl: don't depend on IOP_XATTR
ovl: check for ->listxattr() support
reiserfs: rework priv inode handling
fs: rename generic posix acl handlers
reiserfs: rework ->listxattr() implementation
fs: simplify ->listxattr() implementation
fs: drop unused posix acl handlers
xattr: remove unused argument
xattr: add listxattr helper
xattr: simplify listxattr helpers
|
||
|
Linus Torvalds
|
ec40758b31 |
v6.4/pidfd.file
-----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZEEt8gAKCRCRxhvAZXjc oppuAQDu9kwAQWAl0KzlpjQkrEDAEuyHRy6SCpo1kPPD5f3rigD+INZb3fi2QXmK ZL/c6XtII9ah/8i2zfzAgH9Q2ZZu0gk= =xcAX -----END PGP SIGNATURE----- Merge tag 'v6.4/pidfd.file' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux Pull pidfd updates from Christian Brauner: "This adds a new pidfd_prepare() helper which allows the caller to reserve a pidfd number and allocates a new pidfd file that stashes the provided struct pid. It should be avoided installing a file descriptor into a task's file descriptor table just to close it again via close_fd() in case an error occurs. The fd has been visible to userspace and might already be in use. Instead, a file descriptor should be reserved but not installed into the caller's file descriptor table. If another failure path is hit then the reserved file descriptor and file can just be put without any userspace visible side-effects. And if all failure paths are cleared the file descriptor and file can be installed into the task's file descriptor table. This helper is now used in all places that open coded this functionality before. For example, this is currently done during copy_process() and fanotify used pidfd_create(), which returns a pidfd that has already been made visibile in the caller's file descriptor table, but then closed it using close_fd(). In one of the next merge windows there is also new functionality coming to unix domain sockets that will have to rely on pidfd_prepare()" * tag 'v6.4/pidfd.file' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: fanotify: use pidfd_prepare() fork: use pidfd_prepare() pid: add pidfd_prepare() |
||
|
Linus Torvalds
|
c23f28975a |
Commit volume in documentation is relatively low this time, but there is
still a fair amount going on, including:
- Reorganizing the architecture-specific documentation under
Documentation/arch. This makes the structure match the source directory
and helps to clean up the mess that is the top-level Documentation
directory a bit. This work creates the new directory and moves x86 and
most of the less-active architectures there. The current plan is to move
the rest of the architectures in 6.5, with the patches going through the
appropriate subsystem trees.
- Some more Spanish translations and maintenance of the Italian
translation.
- A new "Kernel contribution maturity model" document from Ted.
- A new tutorial on quickly building a trimmed kernel from Thorsten.
Plus the usual set of updates and fixes.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmRGze0PHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5Y/VsH/RyWqinorRVFZmHqRJMRhR0j7hE2pAgK5prE
dGXYVtHHNQ+25thNaqhZTOLYFbSX6ii2NG7sLRXmyOTGIZrhUCFFXCHkuq4ZUypR
gJpMUiKQVT4dhln3gIZ0k09NSr60gz8UTcq895N9UFpUdY1SCDhbCcLc4uXTRajq
NrdgFaHWRkPb+gBRbXOExYm75DmCC6Ny5AyGo2rXfItV//ETjWIJVQpJhlxKrpMZ
3LgpdYSLhEFFnFGnXJ+EAPJ7gXDi2Tg5DuPbkvJyFOTouF3j4h8lSS9l+refMljN
xNRessv+boge/JAQidS6u8F2m2ESSqSxisv/0irgtKIMJwXaoX4=
=1//8
-----END PGP SIGNATURE-----
Merge tag 'docs-6.4' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"Commit volume in documentation is relatively low this time, but there
is still a fair amount going on, including:
- Reorganize the architecture-specific documentation under
Documentation/arch
This makes the structure match the source directory and helps to
clean up the mess that is the top-level Documentation directory a
bit. This work creates the new directory and moves x86 and most of
the less-active architectures there.
The current plan is to move the rest of the architectures in 6.5,
with the patches going through the appropriate subsystem trees.
- Some more Spanish translations and maintenance of the Italian
translation
- A new "Kernel contribution maturity model" document from Ted
- A new tutorial on quickly building a trimmed kernel from Thorsten
Plus the usual set of updates and fixes"
* tag 'docs-6.4' of git://git.lwn.net/linux: (47 commits)
media: Adjust column width for pdfdocs
media: Fix building pdfdocs
docs: clk: add documentation to log which clocks have been disabled
docs: trace: Fix typo in ftrace.rst
Documentation/process: always CC responsible lists
docs: kmemleak: adjust to config renaming
ELF: document some de-facto PT_* ABI quirks
Documentation: arm: remove stih415/stih416 related entries
docs: turn off "smart quotes" in the HTML build
Documentation: firmware: Clarify firmware path usage
docs/mm: Physical Memory: Fix grammar
Documentation: Add document for false sharing
dma-api-howto: typo fix
docs: move m68k architecture documentation under Documentation/arch/
docs: move parisc documentation under Documentation/arch/
docs: move ia64 architecture docs under Documentation/arch/
docs: Move arc architecture docs under Documentation/arch/
docs: move nios2 documentation under Documentation/arch/
docs: move openrisc documentation under Documentation/arch/
docs: move superh documentation under Documentation/arch/
...
|
||
|
Linus Torvalds
|
5dfb75e842 |
RCU Changes for 6.4:
o MAINTAINERS files additions and changes.
o Fix hotplug warning in nohz code.
o Tick dependency changes by Zqiang.
o Lazy-RCU shrinker fixes by Zqiang.
o rcu-tasks stall reporting improvements by Neeraj.
o Initial changes for renaming of k[v]free_rcu() to its new k[v]free_rcu_mightsleep()
name for robustness.
o Documentation Updates:
o Significant changes to srcu_struct size.
o Deadlock detection for srcu_read_lock() vs synchronize_srcu() from Boqun.
o rcutorture and rcu-related tool, which are targeted for v6.4 from Boqun's tree.
o Other misc changes.
-----BEGIN PGP SIGNATURE-----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=Rgbj
-----END PGP SIGNATURE-----
Merge tag 'rcu.6.4.april5.2023.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jfern/linux
Pull RCU updates from Joel Fernandes:
- Updates and additions to MAINTAINERS files, with Boqun being added to
the RCU entry and Zqiang being added as an RCU reviewer.
I have also transitioned from reviewer to maintainer; however, Paul
will be taking over sending RCU pull-requests for the next merge
window.
- Resolution of hotplug warning in nohz code, achieved by fixing
cpu_is_hotpluggable() through interaction with the nohz subsystem.
Tick dependency modifications by Zqiang, focusing on fixing usage of
the TICK_DEP_BIT_RCU_EXP bitmask.
- Avoid needless calls to the rcu-lazy shrinker for CONFIG_RCU_LAZY=n
kernels, fixed by Zqiang.
- Improvements to rcu-tasks stall reporting by Neeraj.
- Initial renaming of k[v]free_rcu() to k[v]free_rcu_mightsleep() for
increased robustness, affecting several components like mac802154,
drbd, vmw_vmci, tracing, and more.
A report by Eric Dumazet showed that the API could be unknowingly
used in an atomic context, so we'd rather make sure they know what
they're asking for by being explicit:
https://lore.kernel.org/all/20221202052847.2623997-1-edumazet@google.com/
- Documentation updates, including corrections to spelling,
clarifications in comments, and improvements to the srcu_size_state
comments.
- Better srcu_struct cache locality for readers, by adjusting the size
of srcu_struct in support of SRCU usage by Christoph Hellwig.
- Teach lockdep to detect deadlocks between srcu_read_lock() vs
synchronize_srcu() contributed by Boqun.
Previously lockdep could not detect such deadlocks, now it can.
- Integration of rcutorture and rcu-related tools, targeted for v6.4
from Boqun's tree, featuring new SRCU deadlock scenarios, test_nmis
module parameter, and more
- Miscellaneous changes, various code cleanups and comment improvements
* tag 'rcu.6.4.april5.2023.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jfern/linux: (71 commits)
checkpatch: Error out if deprecated RCU API used
mac802154: Rename kfree_rcu() to kvfree_rcu_mightsleep()
rcuscale: Rename kfree_rcu() to kfree_rcu_mightsleep()
ext4/super: Rename kfree_rcu() to kfree_rcu_mightsleep()
net/mlx5: Rename kfree_rcu() to kfree_rcu_mightsleep()
net/sysctl: Rename kvfree_rcu() to kvfree_rcu_mightsleep()
lib/test_vmalloc.c: Rename kvfree_rcu() to kvfree_rcu_mightsleep()
tracing: Rename kvfree_rcu() to kvfree_rcu_mightsleep()
misc: vmw_vmci: Rename kvfree_rcu() to kvfree_rcu_mightsleep()
drbd: Rename kvfree_rcu() to kvfree_rcu_mightsleep()
rcu: Protect rcu_print_task_exp_stall() ->exp_tasks access
rcu: Avoid stack overflow due to __rcu_irq_enter_check_tick() being kprobe-ed
rcu-tasks: Report stalls during synchronize_srcu() in rcu_tasks_postscan()
rcu: Permit start_poll_synchronize_rcu_expedited() to be invoked early
rcu: Remove never-set needwake assignment from rcu_report_qs_rdp()
rcu: Register rcu-lazy shrinker only for CONFIG_RCU_LAZY=y kernels
rcu: Fix missing TICK_DEP_MASK_RCU_EXP dependency check
rcu: Fix set/clear TICK_DEP_BIT_RCU_EXP bitmask race
rcu/trace: use strscpy() to instead of strncpy()
tick/nohz: Fix cpu_is_hotpluggable() by checking with nohz subsystem
...
|
||
|
Linus Torvalds
|
08e30833f8 |
lsm/stable-6.4 PR 20230420
-----BEGIN PGP SIGNATURE----- iQJIBAABCAAyFiEES0KozwfymdVUl37v6iDy2pc3iXMFAmRBolwUHHBhdWxAcGF1 bC1tb29yZS5jb20ACgkQ6iDy2pc3iXMy/w//YOB9EJ7hpAGouq0Il+SyWdLQP1Bw dOaJ5Xs0zDUQJsloqLpkk83aKocHXnl2jIE0mYVhfX2tdd2odKv/qKFcSPCBx1pf STRHsDBkNfi9wldAWZ6y92WZk9l0lqwdP/sJ4TMsrJLEnkeOBwcwAA4zzPRVu+dN aJQkSCj/5hF7r7/BvpfO+78O2h3dC42L6SepHrjnc/btSZ4qW4dPMJfTD7zT6r5Y tVRD/IZ+f7cakKulnWvOIXNGR45CTdE6TiPd9mxkbA2I86wvEec6jLIYtpPoEmtU +vENXjKDAX+Af3DyIC0rZECBFoAjLR0Myi75i74Haug0nxPyPqcjDKKYpfKwYxT0 CH1LHx4rHUbUvXz4tbLuEiNEb5ZX+P5Rpklev8aijvQ/3iVjdzkg74a4QDZcHi8K 1V/uKSBcC6De3789KmwEYIQu35cXqbT5TscuK4Hf8fdHcPZGRvjps12JSkuRhrIQ B5vJ4AZ3O5CWXO9u/n9czssnQ0WHSFFy1/OEpsVgXLpYMwP4xIr0q+C3n1Efnxnp HjoqE1N8bgsV4hYzwZwX3z490Vo4V3S6cpYp40UoeiJ0bJup5WuBselOSnZozyLQ hxxNHXFY8QtwQ0Ik4rTHfttwa28DE6qF+zh6mJDdgdbLfmlBGn3EaW9cwJrCiQ6X pZ6R6SdwFdyj7Uk= =JtiD -----END PGP SIGNATURE----- Merge tag 'lsm-pr-20230420' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm Pull lsm updates from Paul Moore: - Move the LSM hook comment blocks into security/security.c For many years the LSM hook comment blocks were located in a very odd place, include/linux/lsm_hooks.h, where they lived on their own, disconnected from both the function prototypes and definitions. In keeping with current kernel conventions, this moves all of these comment blocks to the top of the function definitions, transforming them into the kdoc format in the process. This should make it much easier to maintain these comments, which are the main source of LSM hook documentation. For the most part the comment contents were left as-is, although some glaring errors were corrected. Expect additional edits in the future as we slowly update and correct the comment blocks. This is the bulk of the diffstat. - Introduce LSM_ORDER_LAST Similar to how LSM_ORDER_FIRST is used to specify LSMs which should be ordered before "normal" LSMs, the LSM_ORDER_LAST is used to specify LSMs which should be ordered after "normal" LSMs. This is one of the prerequisites for transitioning IMA/EVM to a proper LSM. - Remove the security_old_inode_init_security() hook The security_old_inode_init_security() LSM hook only allows for a single xattr which is problematic both for LSM stacking and the IMA/EVM-as-a-LSM effort. This finishes the conversion over to the security_inode_init_security() hook and removes the single-xattr LSM hook. - Fix a reiserfs problem with security xattrs During the security_old_inode_init_security() removal work it became clear that reiserfs wasn't handling security xattrs properly so we fixed it. * tag 'lsm-pr-20230420' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm: (32 commits) reiserfs: Add security prefix to xattr name in reiserfs_security_write() security: Remove security_old_inode_init_security() ocfs2: Switch to security_inode_init_security() reiserfs: Switch to security_inode_init_security() security: Remove integrity from the LSM list in Kconfig Revert "integrity: double check iint_cache was initialized" security: Introduce LSM_ORDER_LAST and set it for the integrity LSM device_cgroup: Fix typo in devcgroup_css_alloc description lsm: fix a badly named parameter in security_get_getsecurity() lsm: fix doc warnings in the LSM hook comments lsm: styling fixes to security/security.c lsm: move the remaining LSM hook comments to security/security.c lsm: move the io_uring hook comments to security/security.c lsm: move the perf hook comments to security/security.c lsm: move the bpf hook comments to security/security.c lsm: move the audit hook comments to security/security.c lsm: move the binder hook comments to security/security.c lsm: move the sysv hook comments to security/security.c lsm: move the key hook comments to security/security.c lsm: move the xfrm hook comments to security/security.c ... |
||
Qi Han
|
8375be2b64 |
f2fs: remove unnessary comment in __may_age_extent_tree
This comment make no sense and is in the wrong place, so let's remove it. Signed-off-by: Qi Han <hanqi@vivo.com> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> |
||
Daeho Jeong
|
994b442b66 |
f2fs: allocate node blocks for atomic write block replacement
When a node block is missing for atomic write block replacement, we need to allocate it in advance of the replacement. Signed-off-by: Daeho Jeong <daehojeong@google.com> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> |
||
|
Daeho Jeong
|
591fc34e1f |
f2fs: use cow inode data when updating atomic write
Need to use cow inode data content instead of the one in the original inode, when we try to write the already updated atomic write files. Signed-off-by: Daeho Jeong <daehojeong@google.com> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> |
||
Jaegeuk Kim
|
2e2c6e9b72 |
f2fs: remove power-of-two limitation of zoned device
In f2fs, there's no reason to force po2. Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> |
||
|
Linus Torvalds
|
b9dff2195f |
iter-ubuf.2-2023-04-21
-----BEGIN PGP SIGNATURE----- iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmRCvdsQHGF4Ym9lQGtl cm5lbC5kawAKCRD301j7KXHgpg4oD/457EJ21Fm36NuyT/S0Cr8ok9Tdk7t9BeBh V/9CYThoXr5aqAox0Vq23FF+Rhzm81GzwYERN4493LBblliNeNOo2IaXF9/7qrUW 11v9Bkug2J3k3hRGtEa6Zl0EpMu+FRLsNpchjFS2KPuOq+iMDxrvwuy50kidWg7n r25e4UwpExVO9fIoUSmzgWVfRHOTuj9yiG/UsaH2+2BRXerIX0Q1tyElwmcGh25M Ad2hN+yDnuIbNA5gNUpnzY32Dp0zjAsquc//QOvq9mltcNTElokB8idGliismvyd 8qF0lkwQwewOBT/sSD5EY3K0Qd8IJu425bvT/yPUDScHz1chxHUoxo5eisIr2M9l 5AL5KHAf7Zzs8ZuV+IYPzZ5qM6a/vF3mHUisKRNKYVhF46Nmd4cBratfXwWb1MxV clQM2qr0TLOYli9mOeTXph3hg/rBVqKqf90boAZoN8b2tWBKlMykpqRadbepjrgx bmBSwwAF99NxIHEjU3U5DMdUloCSiMZIfMfDxQrPNDrfWAW4xJs5Ym0VeOjEotTt oFEs1fr6c3Mn7KEuPPfOtnDxvs51IP/B8+gDgMt/edf+wHiCU1Zm31u2gxt2dsKh g73Y92i5SHjIf36H5szBTeioyMy1E1VA9HF14xWz2eKdQ+wxQ9VNWoctcJ85k3F4 6AZDYRIrWA== =EaE9 -----END PGP SIGNATURE----- Merge tag 'iter-ubuf.2-2023-04-21' of git://git.kernel.dk/linux Pull ITER_UBUF updates from Jens Axboe: "This turns singe vector imports into ITER_UBUF, rather than ITER_IOVEC. The former is more trivial to iterate and advance, and hence a bit more efficient. From some very unscientific testing, ~60% of all iovec imports are single vector" * tag 'iter-ubuf.2-2023-04-21' of git://git.kernel.dk/linux: iov_iter: Mark copy_compat_iovec_from_user() noinline iov_iter: import single vector iovecs as ITER_UBUF iov_iter: convert import_single_range() to ITER_UBUF iov_iter: overlay struct iovec and ubuf/len iov_iter: set nr_segs = 1 for ITER_UBUF iov_iter: remove iov_iter_iovec() iov_iter: add iter_iov_addr() and iter_iov_len() helpers ALSA: pcm: check for user backed iterator, not specific iterator type IB/qib: check for user backed iterator, not specific iterator type IB/hfi1: check for user backed iterator, not specific iterator type iov_iter: add iter_iovec() helper block: ensure bio_alloc_map_data() deals with ITER_UBUF correctly |
||
|
Namjae Jeon
|
74d7970feb |
ksmbd: fix racy issue from using ->d_parent and ->d_name
Al pointed out that ksmbd has racy issue from using ->d_parent and ->d_name in ksmbd_vfs_unlink and smb2_vfs_rename(). and use new lock_rename_child() to lock stable parent while underlying rename racy. Introduce vfs_path_parent_lookup helper to avoid out of share access and export vfs functions like the following ones to use vfs_path_parent_lookup(). - rename __lookup_hash() to lookup_one_qstr_excl(). - export lookup_one_qstr_excl(). - export getname_kernel() and putname(). vfs_path_parent_lookup() is used for parent lookup of destination file using absolute pathname given from FILE_RENAME_INFORMATION request. Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> |
||
David Disseldorp
|
af36c51e0e |
ksmbd: remove unused compression negotiate ctx packing
build_compression_ctxt() is currently unreachable due to conn.compress_algorithm remaining zero (SMB3_COMPRESS_NONE). It appears to have been broken in a couple of subtle ways over the years: - prior to |
||
|
David Disseldorp
|
a12a07a85a |
ksmbd: avoid duplicate negotiate ctx offset increments
Both pneg_ctxt and ctxt_size change in unison, with each adding the length of the previously added context, rounded up to an eight byte boundary. Drop pneg_ctxt increments and instead use the ctxt_size offset when passing output pointers to per-context helper functions. This slightly simplifies offset tracking and shaves off a few text bytes. Before (x86-64 gcc 7.5): text data bss dec hex filename 213234 8677 672 222583 36577 ksmbd.ko After: text data bss dec hex filename 213218 8677 672 222567 36567 ksmbd.ko Signed-off-by: David Disseldorp <ddiss@suse.de> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> |
||
|
David Disseldorp
|
34e8ccf9ce |
ksmbd: set NegotiateContextCount once instead of every inc
There are no early returns, so marshalling the incremented NegotiateContextCount with every context is unnecessary. Signed-off-by: David Disseldorp <ddiss@suse.de> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> |
||
|
Steve French
|
42bc6793e4 |
lock_rename_child() (for ksmbd folks)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZEYEIwAKCRBZ7Krx/gZQ 60Y+AP9UHVj3Kc4F5FnX+z/lfRwMMP6+hO3Gb1nGr9jddCpthgEAnsPGC3iitMSa vsDw5G+gAsb4qyvJv1U0JJ2VkveZPgA= =4UtI -----END PGP SIGNATURE----- Merge tag 'pull-lock_rename_child' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs into ksmbd-for-next lock_rename_child() (for ksmbd folks) Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> |
||
Volker Lendecke
|
919e57c314 |
cifs: Avoid a cast in add_lease_context()
We have the correctly-typed struct smb2_create_req * available in the caller. Signed-off-by: Volker Lendecke <vl@samba.org> Reviewed-by Ralph Boehme <slow@samba.org> Signed-off-by: Steve French <stfrench@microsoft.com> |
||
|
Volker Lendecke
|
d2ec43b515 |
cifs: Simplify SMB2_open_init()
Reduce code duplication by calculating req->CreateContextsLength in one place. This is the last reference to "req" in the add_*_context functions, remove that parameter. Signed-off-by: Volker Lendecke <vl@samba.org> Reviewed-by: Enzo Matsumiya <ematsumiya@suse.de> Signed-off-by: Steve French <stfrench@microsoft.com> |
||
|
Volker Lendecke
|
2a8d1387ed |
cifs: Simplify SMB2_open_init()
Reduce code duplication by stitching together create contexts in one place. Signed-off-by: Volker Lendecke <vl@samba.org> Reviewed-by: Enzo Matsumiya <ematsumiya@suse.de> Signed-off-by: Steve French <stfrench@microsoft.com> |
||
|
Volker Lendecke
|
5ec629e037 |
cifs: Simplify SMB2_open_init()
We can point to the create contexts in just one place, we don't have to do this in every add_*_context routine. Signed-off-by: Volker Lendecke <vl@samba.org> Reviewed-by: Enzo Matsumiya <ematsumiya@suse.de> Signed-off-by: Steve French <stfrench@microsoft.com> |
||
|
Zhihao Cheng
|
b5fda08ef2 |
ubifs: Fix memleak when insert_old_idx() failed
Following process will cause a memleak for copied up znode:
dirty_cow_znode
zn = copy_znode(c, znode);
err = insert_old_idx(c, zbr->lnum, zbr->offs);
if (unlikely(err))
return ERR_PTR(err); // No one refers to zn.
Fetch a reproducer in [Link].
Function copy_znode() is split into 2 parts: resource allocation
and znode replacement, insert_old_idx() is split in similar way,
so resource cleanup could be done in error handling path without
corrupting metadata(mem & disk).
It's okay that old index inserting is put behind of add_idx_dirt(),
old index is used in layout_leb_in_gaps(), so the two processes do
not depend on each other.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216705
Fixes:
|
||
|
Zhihao Cheng
|
7d01cb27f6 |
Revert "ubifs: dirty_cow_znode: Fix memleak in error handling path"
This reverts commit |
||
|
Linus Torvalds
|
84ebdb8e0d |
three small smb3 client fixes
-----BEGIN PGP SIGNATURE-----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=KXCn
-----END PGP SIGNATURE-----
Merge tag '6.3-rc7-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Three small smb3 client fixes:
- two important fixes for unbuffered read regression with the
iov_iter changes (e.g. read soon after mount in some multichannel
scenarios)
- DFS prefix path fix (also for stable)"
* tag '6.3-rc7-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Reapply lost fix from commit
|
||
|
David Howells
|
e0416e7d33 |
rxrpc: Fix potential race in error handling in afs_make_call()
If the rxrpc call set up by afs_make_call() receives an error whilst it is transmitting the request, there's the possibility that it may get to the point the rxrpc call is ended (after the error_kill_call label) just as the call is queued for async processing. This could manifest itself as call->rxcall being seen as NULL in afs_deliver_to_call() when it tries to lock the call. Fix this by splitting rxrpc_kernel_end_call() into a function to shut down an rxrpc call and a function to release the caller's reference and calling the latter only when we get to afs_put_call(). Reported-by: Jeffrey Altman <jaltman@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: kafs-testing+fedora36_64checkkafs-build-306@auristor.com cc: Marc Dionne <marc.dionne@auristor.com> cc: "David S. Miller" <davem@davemloft.net> cc: Eric Dumazet <edumazet@google.com> cc: Jakub Kicinski <kuba@kernel.org> cc: Paolo Abeni <pabeni@redhat.com> cc: linux-afs@lists.infradead.org cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Arnd Bergmann
|
09d49eb90f |
ocfs2: reduce ioctl stack usage
On 32-bit architectures with KASAN_STACK enabled, the total stack usage of the ocfs2_ioctl function grows beyond the warning limit: fs/ocfs2/ioctl.c: In function 'ocfs2_ioctl': fs/ocfs2/ioctl.c:934:1: error: the frame size of 1448 bytes is larger than 1400 bytes [-Werror=frame-larger-than=] Move each of the variables into a basic block, and mark ocfs2_info_handle() as noinline_for_stack, in order to have the variable share stack slots. Link: https://lkml.kernel.org/r/20230417205631.1956027-1-arnd@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Reviewed-by: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Chunguang Wu
|
522dc4e5f5 |
fs/proc: add Kthread flag to /proc/$pid/status
The command `ps -ef ` and `top -c` mark kernel thread by '[' and ']', but sometimes the result is not correct. The task->flags in /proc/$pid/stat is good, but we need remember the value of PF_KTHREAD is 0x00200000 and convert dec to hex. If we have no binary program and shell script which read /proc/$pid/stat, we can know it directly by `cat /proc/$pid/status`. Link: https://lkml.kernel.org/r/20230416052404.2920-1-fullspring2018@gmail.com Signed-off-by: Chunguang Wu <fullspring2018@gmail.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Linus Torvalds
|
6b008640db |
mm: move 'mmap_min_addr' logic from callers into vm_unmapped_area()
Instead of having callers care about the mmap_min_addr logic for the
lowest valid mapping address (and some of them getting it wrong), just
move the logic into vm_unmapped_area() itself. One less thing for various
architecture cases (and generic helpers) to worry about.
We should really try to make much more of this be common code, but baby
steps..
Without this, vm_unmapped_area() could return an address below
mmap_min_addr (because some caller forgot about that). That then causes
the mmap machinery to think it has found a workable address, but then
later security_mmap_addr(addr) is unhappy about it and the mmap() returns
with a nonsensical error (EPERM).
The proper action is to either return ENOMEM (if the virtual address space
is exhausted), or try to find another address (ie do a bottom-up search
for free addresses after the top-down one failed).
See commit
|
||
Stefan Roesch
|
d21077fbc2 |
mm: add new KSM process and sysfs knobs
This adds the general_profit KSM sysfs knob and the process profit metric knobs to ksm_stat. 1) expose general_profit metric The documentation mentions a general profit metric, however this metric is not calculated. In addition the formula depends on the size of internal structures, which makes it more difficult for an administrator to make the calculation. Adding the metric for a better user experience. 2) document general_profit sysfs knob 3) calculate ksm process profit metric The ksm documentation mentions the process profit metric and how to calculate it. This adds the calculation of the metric. 4) mm: expose ksm process profit metric in ksm_stat This exposes the ksm process profit metric in /proc/<pid>/ksm_stat. The documentation mentions the formula for the ksm process profit metric, however it does not calculate it. In addition the formula depends on the size of internal structures. So it makes sense to expose it. 5) document new procfs ksm knobs Link: https://lkml.kernel.org/r/20230418051342.1919757-3-shr@devkernel.io Signed-off-by: Stefan Roesch <shr@devkernel.io> Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Pankaj Raghav
|
c6c8c3e7b4 |
fs/buffer: convert create_page_buffers to folio_create_buffers
fs/buffer do not support large folios as there are many assumptions on the folio size to be the host page size. This conversion is one step towards removing that assumption. Also this conversion will reduce calls to compound_head() if folio_create_buffers() calls folio_create_empty_buffers(). Link: https://lkml.kernel.org/r/20230417123618.22094-5-p.raghav@samsung.com Signed-off-by: Pankaj Raghav <p.raghav@samsung.com> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Christian Brauner <brauner@kernel.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |