Since debugfs_create_dir() returns ERR_PTR, IS_ERR() is enough to
check whether the directory is successfully created. So remove the
redundant NULL check.
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230817073017.350002-1-ruanjinjie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
do_pci_disable_device() disable PCI bus-mastering as following:
static void do_pci_disable_device(struct pci_dev *dev)
{
u16 pci_command;
pci_read_config_word(dev, PCI_COMMAND, &pci_command);
if (pci_command & PCI_COMMAND_MASTER) {
pci_command &= ~PCI_COMMAND_MASTER;
pci_write_config_word(dev, PCI_COMMAND, pci_command);
}
pcibios_disable_device(dev);
}
And pci_disable_device() sets dev->is_busmaster to 0.
pci_enable_device() is called only once before calling to
pci_disable_device() and such pci_clear_master() is not needed. So remove
redundant pci_clear_master().
Also rename goto label 'err_out_clear_master' to 'err_out_disable_device'.
Signed-off-by: Yu Liao <liaoyu15@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://lore.kernel.org/r/20230817025709.2023553-1-liaoyu15@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
virtchnl: fix fake 1-elem arrays
Alexander Lobakin says:
6.5-rc1 started spitting warning splats when composing virtchnl
messages, precisely on virtchnl_rss_key and virtchnl_lut:
[ 84.167709] memcpy: detected field-spanning write (size 52) of single
field "vrk->key" at drivers/net/ethernet/intel/iavf/iavf_virtchnl.c:1095
(size 1)
[ 84.169915] WARNING: CPU: 3 PID: 11 at drivers/net/ethernet/intel/
iavf/iavf_virtchnl.c:1095 iavf_set_rss_key+0x123/0x140 [iavf]
...
[ 84.191982] Call Trace:
[ 84.192439] <TASK>
[ 84.192900] ? __warn+0xc9/0x1a0
[ 84.193353] ? iavf_set_rss_key+0x123/0x140 [iavf]
[ 84.193818] ? report_bug+0x12c/0x1b0
[ 84.194266] ? handle_bug+0x42/0x70
[ 84.194714] ? exc_invalid_op+0x1a/0x50
[ 84.195149] ? asm_exc_invalid_op+0x1a/0x20
[ 84.195592] ? iavf_set_rss_key+0x123/0x140 [iavf]
[ 84.196033] iavf_watchdog_task+0xb0c/0xe00 [iavf]
...
[ 84.225476] memcpy: detected field-spanning write (size 64) of single
field "vrl->lut" at drivers/net/ethernet/intel/iavf/iavf_virtchnl.c:1127
(size 1)
[ 84.227190] WARNING: CPU: 27 PID: 1044 at drivers/net/ethernet/intel/
iavf/iavf_virtchnl.c:1127 iavf_set_rss_lut+0x123/0x140 [iavf]
...
[ 84.246601] Call Trace:
[ 84.247228] <TASK>
[ 84.247840] ? __warn+0xc9/0x1a0
[ 84.248263] ? iavf_set_rss_lut+0x123/0x140 [iavf]
[ 84.248698] ? report_bug+0x12c/0x1b0
[ 84.249122] ? handle_bug+0x42/0x70
[ 84.249549] ? exc_invalid_op+0x1a/0x50
[ 84.249970] ? asm_exc_invalid_op+0x1a/0x20
[ 84.250390] ? iavf_set_rss_lut+0x123/0x140 [iavf]
[ 84.250820] iavf_watchdog_task+0xb16/0xe00 [iavf]
Gustavo already tried to fix those back in 2021[0][1]. Unfortunately,
a VM can run a different kernel than the host, meaning that those
structures are sorta ABI.
However, it is possible to have proper flex arrays + struct_size()
calculations and still send the very same messages with the same sizes.
The common rule is:
elem[1] -> elem[]
size = struct_size() + <difference between the old and the new msg size>
The "old" size in the current code is calculated 3 different ways for
10 virtchnl structures total. Each commit addresses one of the ways
cumulatively instead of per-structure.
I was planning to send it to -net initially, but given that virtchnl was
renamed from i40evf and got some fat style cleanup commits in the past,
it's not very straightforward to even pick appropriate SHAs, not
speaking of automatic portability. I may send manual backports for
a couple of the latest supported kernels later on if anyone needs it
at all.
[0] https://lore.kernel.org/all/20210525230912.GA175802@embeddedor
[1] https://lore.kernel.org/all/20210525231851.GA176647@embeddedor
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
virtchnl: fix fake 1-elem arrays for structures allocated as `nents`
virtchnl: fix fake 1-elem arrays in structures allocated as `nents + 1`
virtchnl: fix fake 1-elem arrays in structs allocated as `nents + 1` - 1
====================
Link: https://lore.kernel.org/r/20230816210657.1326772-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- bump version strings, by Simon Wunderlich
- Remove unused declarations, by Yue Haibing
- Clean up MTU handling, by Sven Eckelmann (2 patches)
- Clean up/remove (obsolete) functions, by Sven Eckelmann (3 patches)
-----BEGIN PGP SIGNATURE-----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=f1Uk
-----END PGP SIGNATURE-----
Merge tag 'batadv-next-pullrequest-20230816' of git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
This cleanup patchset includes the following patches:
- bump version strings, by Simon Wunderlich
- Remove unused declarations, by Yue Haibing
- Clean up MTU handling, by Sven Eckelmann (2 patches)
- Clean up/remove (obsolete) functions, by Sven Eckelmann (3 patches)
* tag 'batadv-next-pullrequest-20230816' of git://git.open-mesh.org/linux-merge:
batman-adv: Drop per algo GW section class code
batman-adv: Keep batadv_netlink_notify_* static
batman-adv: Drop unused function batadv_gw_bandwidth_set
batman-adv: Check hardif MTU against runtime MTU
batman-adv: Avoid magic value for minimum MTU
batman-adv: Remove unused declarations
batman-adv: Start new development cycle
====================
Link: https://lore.kernel.org/r/20230816164000.190884-1-sw@simonwunderlich.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that the "budget" is passed into fec_enet_tx_queue(), one
optimization we can do is to use napi_consume_skb() to instead
of dev_kfree_skb_any().
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Suggested-by: Alexander H Duyck <alexander.duyck@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230816090242.463822-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
./drivers/net/ethernet/sfc/tc_conntrack.c:464:2-3: Unneeded semicolon
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20230816004944.10841-1-yang.lee@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since v6.5-rc1 MM-tree is merged and contains a new flag SLAB_NO_MERGE
in commit d0bf7d5759 ("mm/slab: introduce kmem_cache flag SLAB_NO_MERGE")
now is the time to use this flag for networking as proposed
earlier see link.
The SKB (sk_buff) kmem_cache slab is critical for network performance.
Network stack uses kmem_cache_{alloc,free}_bulk APIs to gain
performance by amortising the alloc/free cost.
For the bulk API to perform efficiently the slub fragmentation need to
be low. Especially for the SLUB allocator, the efficiency of bulk free
API depend on objects belonging to the same slab (page).
When running different network performance microbenchmarks, I started
to notice that performance was reduced (slightly) when machines had
longer uptimes. I believe the cause was 'skbuff_head_cache' got
aliased/merged into the general slub for 256 bytes sized objects (with
my kernel config, without CONFIG_HARDENED_USERCOPY).
For SKB kmem_cache network stack have other various reasons for
not merging, but it varies depending on kernel config (e.g.
CONFIG_HARDENED_USERCOPY). We want to explicitly set SLAB_NO_MERGE
for this kmem_cache to get most out of kmem_cache_{alloc,free}_bulk APIs.
When CONFIG_SLUB_TINY is configured the bulk APIs are essentially
disabled. Thus, for this case drop the SLAB_NO_MERGE flag.
Link: https://lore.kernel.org/all/167396280045.539803.7540459812377220500.stgit@firesoul/
Signed-off-by: Jesper Dangaard Brouer <hawk@kernel.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Link: https://lore.kernel.org/r/169211265663.1491038.8580163757548985946.stgit@firesoul
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/sfc/tc.c
fa165e1949 ("sfc: don't unregister flow_indr if it was never registered")
3bf969e88a ("sfc: add MAE table machinery for conntrack table")
https://lore.kernel.org/all/20230818112159.7430e9b4@canb.auug.org.au/
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
No known outstanding regressions.
Fixes to fixes:
- virtio-net: set queues after driver_ok, avoid a potential race
added by recent fix
- Revert "vlan: Fix VLAN 0 memory leak", it may lead to a warning
when VLAN 0 is registered explicitly
- nf_tables:
- fix false-positive lockdep splat in recent fixes
- don't fail inserts if duplicate has expired (fix test failures)
- fix races between garbage collection and netns dismantle
Current release - new code bugs:
- mlx5: Fix mlx5_cmd_update_root_ft() error flow
Previous releases - regressions:
- phy: fix IRQ-based wake-on-lan over hibernate / power off
Previous releases - always broken:
- sock: fix misuse of sk_under_memory_pressure() preventing system
from exiting global TCP memory pressure if a single cgroup is under
pressure
- fix the RTO timer retransmitting skb every 1ms if linear option
is enabled
- af_key: fix sadb_x_filter validation, amment netlink policy
- ipsec: fix slab-use-after-free in decode_session6()
- macb: in ZynqMP resume always configure PS GTR for non-wakeup source
Misc:
- netfilter: set default timeout to 3 secs for sctp shutdown send and
recv state (from 300ms), align with protocol timers
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Ze13
-----END PGP SIGNATURE-----
Merge tag 'net-6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from ipsec and netfilter.
No known outstanding regressions.
Fixes to fixes:
- virtio-net: set queues after driver_ok, avoid a potential race
added by recent fix
- Revert "vlan: Fix VLAN 0 memory leak", it may lead to a warning
when VLAN 0 is registered explicitly
- nf_tables:
- fix false-positive lockdep splat in recent fixes
- don't fail inserts if duplicate has expired (fix test failures)
- fix races between garbage collection and netns dismantle
Current release - new code bugs:
- mlx5: Fix mlx5_cmd_update_root_ft() error flow
Previous releases - regressions:
- phy: fix IRQ-based wake-on-lan over hibernate / power off
Previous releases - always broken:
- sock: fix misuse of sk_under_memory_pressure() preventing system
from exiting global TCP memory pressure if a single cgroup is under
pressure
- fix the RTO timer retransmitting skb every 1ms if linear option is
enabled
- af_key: fix sadb_x_filter validation, amment netlink policy
- ipsec: fix slab-use-after-free in decode_session6()
- macb: in ZynqMP resume always configure PS GTR for non-wakeup
source
Misc:
- netfilter: set default timeout to 3 secs for sctp shutdown send and
recv state (from 300ms), align with protocol timers"
* tag 'net-6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (49 commits)
ice: Block switchdev mode when ADQ is active and vice versa
qede: fix firmware halt over suspend and resume
net: do not allow gso_size to be set to GSO_BY_FRAGS
sock: Fix misuse of sk_under_memory_pressure()
sfc: don't fail probe if MAE/TC setup fails
sfc: don't unregister flow_indr if it was never registered
net: dsa: mv88e6xxx: Wait for EEPROM done before HW reset
net/mlx5: Fix mlx5_cmd_update_root_ft() error flow
net/mlx5e: XDP, Fix fifo overrun on XDP_REDIRECT
i40e: fix misleading debug logs
iavf: fix FDIR rule fields masks validation
ipv6: fix indentation of a config attribute
mailmap: add entries for Simon Horman
broadcom: b44: Use b44_writephy() return value
net: openvswitch: reject negative ifindex
team: Fix incorrect deletion of ETH_P_8021AD protocol vid from slaves
net: phy: broadcom: stub c45 read/write for 54810
netfilter: nft_dynset: disallow object maps
netfilter: nf_tables: GC transaction race with netns dismantle
netfilter: nf_tables: fix GC transaction races with netns and netlink event exit path
...
edid:
- revert mode parsing fix that had side effects.
i915:
- Fix the flow for ignoring GuC SLPC efficient frequency selection
- Fix SDVO panel_type initialization
- Fix display probe for IVB Q and IVB D GT2 server
nouveau:
- fix use-after-free in connector code
qaic:
- integer overflow check fix
- fix slicing memory leak
panel:
- fix JDI LT070ME05000 probing
- fix AUO G121EAN01 timings
amdgpu:
- SMU 13.x fixes
- Fix mcbp parameter for gfx9
- SMU 11.x fixes
- Temporary fix for large numbers of XCP partitions
- S0ix fixes
- DCN 2.0 fix
qxl:
- fix use after free race in dumb object allocation
-----BEGIN PGP SIGNATURE-----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=P1rE
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2023-08-18-1' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Regular enough week, mostly the usual amdgpu and i915 fixes. Also
qaic, nouveau, qxl and a revert for an EDID patch that had some side
effects, along with a couple of panel fixes.
edid:
- revert mode parsing fix that had side effects.
i915:
- Fix the flow for ignoring GuC SLPC efficient frequency selection
- Fix SDVO panel_type initialization
- Fix display probe for IVB Q and IVB D GT2 server
nouveau:
- fix use-after-free in connector code
qaic:
- integer overflow check fix
- fix slicing memory leak
panel:
- fix JDI LT070ME05000 probing
- fix AUO G121EAN01 timings
amdgpu:
- SMU 13.x fixes
- Fix mcbp parameter for gfx9
- SMU 11.x fixes
- Temporary fix for large numbers of XCP partitions
- S0ix fixes
- DCN 2.0 fix
qxl:
- fix use after free race in dumb object allocation"
* tag 'drm-fixes-2023-08-18-1' of git://anongit.freedesktop.org/drm/drm:
drm/qxl: fix UAF on handle creation
Revert "drm/edid: Fix csync detailed mode parsing"
drm/nouveau/disp: fix use-after-free in error handling of nouveau_connector_create
Revert "Revert "drm/amdgpu/display: change pipe policy for DCN 2.0""
drm/amd: flush any delayed gfxoff on suspend entry
drm/amdgpu: skip fence GFX interrupts disable/enable for S0ix
drm/amdgpu: skip xcp drm device allocation when out of drm resource
drm/amd/pm: Update pci link width for smu v13.0.6
drm/amd/pm: Fix temperature unit of SMU v13.0.6
drm/amdgpu/pm: fix throttle_status for other than MP1 11.0.7
drm/amdgpu: disable mcbp if parameter zero is set
drm/amd/pm: disallow the fan setting if there is no fan on smu 13.0.0
accel/qaic: Clean up integer overflow checking in map_user_pages()
accel/qaic: Fix slicing memory leak
drm/i915: fix display probe for IVB Q and IVB D GT2 server
drm/i915/sdvo: fix panel_type initialization
drm/i915/guc/slpc: Restore efficient freq earlier
drm/panel: simple: Fix AUO G121EAN01 panel timings according to the docs
drm/panel: JDI LT070ME05000 simplify with dev_err_probe()
Breno Leitao says:
====================
netconsole: Enable compile time configuration
Enable netconsole features to be set at compilation time. Create two
Kconfig options that allow users to set extended logs and release
prepending features at compilation time.
The first patch de-duplicates the initialization code, and the second
patch adds the support in the de-duplicated code, avoiding touching two
different functions with the same change.
====================
Link: https://lore.kernel.org/r/20230811093158.1678322-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Enable netconsole features to be set at compilation time. Create two
Kconfig options that allow users to set extended logs and release
prepending features at compilation time.
Right now, the user needs to pass command line parameters to netconsole,
such as "+"/"r" to enable extended logs and version prepending features.
With these two options, the user could set the default values for the
features at compile time, and don't need to pass it in the command line
to get them enabled, simplifying the command line.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230811093158.1678322-3-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
De-duplicate the initialization and allocation code for struct
netconsole_target.
The same allocation and initialization code is duplicated in two
different places in the netconsole subsystem, when the netconsole target
is initialized by command line parameters (alloc_param_target()), and
dynamically by sysfs (make_netconsole_target()).
Create a helper function, and call it from the two different functions.
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230811093158.1678322-2-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When building with clang 18 I see the following warning:
| drivers/net/mdio/mdio-xgene.c:338:13: warning: cast to smaller integer
| type 'enum xgene_mdio_id' from 'const void *' [-Wvoid-pointer-to-enum-cast]
| 338 | mdio_id = (enum xgene_mdio_id)of_id->data;
This is due to the fact that `of_id->data` is a void* while `enum
xgene_mdio_id` has the size of an int. This leads to truncation and
possible data loss.
Link: https://github.com/ClangBuiltLinux/linux/issues/1910
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20230815-void-drivers-net-mdio-mdio-xgene-v1-1-5304342e0659@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
François Michel says:
====================
netem: use a seeded PRNG for loss and corruption events
In order to reproduce bugs or performance evaluation of
network protocols and applications, it is useful to have
reproducible test suites and tools. This patch adds
a way to specify a PRNG seed through the
TCA_NETEM_PRNG_SEED attribute for generating netem
loss and corruption events. Initializing the qdisc
with the same seed leads to the exact same loss
and corruption patterns. If no seed is explicitly
specified, the qdisc generates a random seed using
get_random_u64().
This patch can be and has been tested using tc from
the following iproute2-next fork:
https://github.com/francoismichel/iproute2-next
For instance, setting the seed 42424242 on the loopback
with a loss rate of 10% will systematically drop the 5th,
12th and 24th packet when sending 25 packets.
====================
Link: https://lore.kernel.org/r/20230815092348.1449179-1-francois.michel@uclouvain.be
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use prandom_u32_state() instead of get_random_u32() to generate
the correlated loss events of netem.
Signed-off-by: François Michel <francois.michel@uclouvain.be>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Link: https://lore.kernel.org/r/20230815092348.1449179-4-francois.michel@uclouvain.be
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use prandom_u32_state() instead of get_random_u32() to generate
the random loss events of netem. The state of the prng is part
of the prng attribute of struct netem_sched_data.
Signed-off-by: François Michel <francois.michel@uclouvain.be>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Link: https://lore.kernel.org/r/20230815092348.1449179-3-francois.michel@uclouvain.be
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add prng attribute to struct netem_sched_data and
allows setting the seed of the PRNG through netlink
using the new TCA_NETEM_PRNG_SEED attribute.
The PRNG attribute is not actually used yet.
Signed-off-by: François Michel <francois.michel@uclouvain.be>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Link: https://lore.kernel.org/r/20230815092348.1449179-2-francois.michel@uclouvain.be
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
PCI core API pci_dev_id() can be used to get the BDF number for a pci
device. We don't need to compose it manually. Use pci_dev_id() to
simplify the code a little bit.
Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Shay Agroskin <shayagr@amazon.com>
Link: https://lore.kernel.org/r/20230815024248.3519068-1-zhangjialin11@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-08-16 (iavf, i40e)
This series contains updates to iavf and i40e drivers.
Piotr adds checks for unsupported Flow Director rules on iavf.
Andrii replaces incorrect 'write' messaging on read operations for i40e.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
i40e: fix misleading debug logs
iavf: fix FDIR rule fields masks validation
====================
Link: https://lore.kernel.org/r/20230816193308.1307535-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
the AUO G121EAN01 panel, an integer overflow and a memory leak fixes for
the qaic accel, a use-after-free fix for nouveau and a revert for an
alleged fix in EDID parsing.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCZN4izwAKCRDj7w1vZxhR
xRxGAP4h+R+qhB1X4SVmCB8DEY109lcHJofNK/z7aW8EG8X4sQEAlb1cOZRtmRjS
9/Wdmc7377soNHNlMNhxEg8kEeqxGwE=
=c6Zn
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2023-08-17' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
One EPROBE_DEFER handling fix for the JDI LT070ME05000, a timing fix for
the AUO G121EAN01 panel, an integer overflow and a memory leak fixes for
the qaic accel, a use-after-free fix for nouveau and a revert for an
alleged fix in EDID parsing.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3olqt33em5uhxzjbqghwcwnvmw73h7bxkbdxookmnkecymd4vc@7ogm6gewpprq
ADQ and switchdev are not supported simultaneously. Enabling both at the
same time can result in nullptr dereference.
To prevent this, check if ADQ is active when changing devlink mode to
switchdev mode, and check if switchdev is active when enabling ADQ.
Fixes: fbc7b27af0 ("ice: enable ndo_setup_tc support for mqprio_qdisc")
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230816193405.1307580-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While performing certain power-off sequences, PCI drivers are
called to suspend and resume their underlying devices through
PCI PM (power management) interface. However this NIC hardware
does not support PCI PM suspend/resume operations so system wide
suspend/resume leads to bad MFW (management firmware) state which
causes various follow-up errors in driver when communicating with
the device/firmware afterwards.
To fix this driver implements PCI PM suspend handler to indicate
unsupported operation to the PCI subsystem explicitly, thus avoiding
system to go into suspended/standby mode.
Without this fix device/firmware does not recover unless system
is power cycled.
Fixes: 2950219d87 ("qede: Add basic network device support")
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Alok Prasad <palok@marvell.com>
Reviewed-by: John Meneghini <jmeneghi@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230816150711.59035-1-manishc@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The status of global socket memory pressure is updated when:
a) __sk_mem_raise_allocated():
enter: sk_memory_allocated(sk) > sysctl_mem[1]
leave: sk_memory_allocated(sk) <= sysctl_mem[0]
b) __sk_mem_reduce_allocated():
leave: sk_under_memory_pressure(sk) &&
sk_memory_allocated(sk) < sysctl_mem[0]
So the conditions of leaving global pressure are inconstant, which
may lead to the situation that one pressured net-memcg prevents the
global pressure from being cleared when there is indeed no global
pressure, thus the global constrains are still in effect unexpectedly
on the other sockets.
This patch fixes this by ignoring the net-memcg's pressure when
deciding whether should leave global memory pressure.
Fixes: e1aab161e0 ("socket: initial cgroup code.")
Signed-off-by: Abel Wu <wuyun.abel@bytedance.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Link: https://lore.kernel.org/r/20230816091226.1542-1-wuyun.abel@bytedance.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Existing comment in the source explains why we don't want efx_init_tc()
failure to be fatal. Cited commit erroneously consolidated failure
paths causing the probe to be failed in this case.
Fixes: 7e056e2360 ("sfc: obtain device mac address based on firmware handle for ef100")
Reviewed-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://lore.kernel.org/r/aa7f589dd6028bd1ad49f0a85f37ab33c09b2b45.1692114888.git.ecree.xilinx@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In efx_init_tc(), move the setting of efx->tc->up after the
flow_indr_dev_register() call, so that if it fails, efx_fini_tc()
won't call flow_indr_dev_unregister().
Fixes: 5b2e12d51b ("sfc: bind indirect blocks for TC offload on EF100")
Suggested-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Reviewed-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://lore.kernel.org/r/a81284d7013aba74005277bd81104e4cfbea3f6f.1692114888.git.ecree.xilinx@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Fix new MSG_SPLICE_PAGES support in server's TCP sendmsg helper
-----BEGIN PGP SIGNATURE-----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=jfUp
-----END PGP SIGNATURE-----
Merge tag 'nfsd-6.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fix from Chuck Lever:
- Fix new MSG_SPLICE_PAGES support in server's TCP sendmsg helper
* tag 'nfsd-6.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
sunrpc: set the bv_offset of first bvec in svc_tcp_sendmsg
If the switch is reset during active EEPROM transactions, as in
just after an SoC reset after power up, the I2C bus transaction
may be cut short leaving the EEPROM internal I2C state machine
in the wrong state. When the switch is reset again, the bad
state machine state may result in data being read from the wrong
memory location causing the switch to enter unexpected mode
rendering it inoperational.
Fixes: a3dcb3e7e7 ("net: dsa: mv88e6xxx: Wait for EEPROM done after HW reset")
Signed-off-by: Alfred Lee <l00g33k@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230815001323.24739-1-l00g33k@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZN0eNgAKCRDbK58LschI
gwhhAQCwbrEgA3LslDlk22eqyfRH04D+9d7Kc3ISQssyjlr9swD+NfwfDvYqopwj
Dp67QkHdluixf2/NMPTEvg/CA4mlmww=
=4BwF
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2023-08-16
We've added 17 non-merge commits during the last 6 day(s) which contain
a total of 20 files changed, 1179 insertions(+), 37 deletions(-).
The main changes are:
1) Add a BPF hook in sys_socket() to change the protocol ID
from IPPROTO_TCP to IPPROTO_MPTCP to cover migration for legacy
applications, from Geliang Tang.
2) Follow-up/fallout fix from the SO_REUSEPORT + bpf_sk_assign work
to fix a splat on non-fullsock sks in inet[6]_steal_sock,
from Lorenz Bauer.
3) Improvements to struct_ops links to avoid forcing presence of
update/validate callbacks. Also add bpf_struct_ops fields documentation,
from David Vernet.
4) Ensure libbpf sets close-on-exec flag on gzopen, from Marco Vedovati.
5) Several new tcx selftest additions and bpftool link show support for
tcx and xdp links, from Daniel Borkmann.
6) Fix a smatch warning on uninitialized symbol in
bpf_perf_link_fill_kprobe, from Yafang Shao.
7) BPF selftest fixes e.g. misplaced break in kfunc_call test,
from Yipeng Zou.
8) Small cleanup to remove unused declaration bpf_link_new_file,
from Yue Haibing.
9) Small typo fix to bpftool's perf help message, from Daniel T. Lee.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
selftests/bpf: Add mptcpify test
selftests/bpf: Fix error checks of mptcp open_and_load
selftests/bpf: Add two mptcp netns helpers
bpf: Add update_socket_protocol hook
bpftool: Implement link show support for xdp
bpftool: Implement link show support for tcx
selftests/bpf: Add selftest for fill_link_info
bpf: Fix uninitialized symbol in bpf_perf_link_fill_kprobe()
net: Fix slab-out-of-bounds in inet[6]_steal_sock
bpf: Document struct bpf_struct_ops fields
bpf: Support default .validate() and .update() behavior for struct_ops links
selftests/bpf: Add various more tcx test cases
selftests/bpf: Clean up fmod_ret in bench_rename test script
selftests/bpf: Fix repeat option when kfunc_call verification fails
libbpf: Set close-on-exec flag on gzopen
bpftool: fix perf help message
bpf: Remove unused declaration bpf_link_new_file()
====================
Link: https://lore.kernel.org/r/20230816212840.1539-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The cited patch change mlx5_cmd_update_root_ft() to work with multiple
peer devices. However, it didn't align the error flow as well.
Hence, Fix the error code to work with multiple peer devices.
Fixes: 222dd18583 ("{net/RDMA}/mlx5: introduce lag_for_each_peer")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Before this fix, running high rate traffic through XDP_REDIRECT
with multibuf could overrun the fifo used to release the
xdp frames after tx completion. This resulted in corrupted data
being consumed on the free side.
The culplirt was a miscalculation of the fifo size: the maximum ratio
between fifo entries / data segments was incorrect. This ratio serves to
calculate the max fifo size for a full sq where each packet uses the
worst case number of entries in the fifo.
This patch fixes the formula and names the constant. It also makes sure
that future values will use a power of 2 number of entries for the fifo
mask to work.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Fixes: 3f734b8c59 ("net/mlx5e: XDP, Use multiple single-entry objects in xdpi_fifo")
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
This reverts commit 27dd79c00a.
It appears MPC_SPLIT_DYNAMIC still causes problems with multiple
displays on DCN2.0 hardware. Switch back to MPC_SPLIT_AVOID_MULT_DISP.
This increases power usage with multiple displays, but avoids hangs.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2475
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.4.x
DCN 3.1.4 is reported to hang on s2idle entry if graphics activity
is happening during entry. This is because GFXOFF was scheduled as
delayed but RLC gets disabled in s2idle entry sequence which will
hang GFX IP if not already in GFXOFF.
To help this problem, flush any delayed work for GFXOFF early in
s2idle entry sequence to ensure that it's off when RLC is changed.
commit 4b31b92b14 ("drm/amdgpu: complete gfxoff allow signal during
suspend without delay") modified power gating flow so that if called
in s0ix that it ensured that GFXOFF wasn't put in work queue but
instead processed immediately.
This is dead code due to commit 10cb67eb8a ("drm/amdgpu: skip
CG/PG for gfx during S0ix") because GFXOFF will now not be explicitly
called as part of the suspend entry code. Remove that dead code.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
GFX v11.0.1 reported fence fallback timer expired issue on
SDMA and GFX rings after S0ix resume. This is generated by
EOP interrupts are disabled when S0ix suspend but fails to
re-enable when resume because of the GFX is in GFXOFF.
[ 203.349571] [drm] Fence fallback timer expired on ring sdma0
[ 203.349572] [drm] Fence fallback timer expired on ring gfx_0.0.0
[ 203.861635] [drm] Fence fallback timer expired on ring gfx_0.0.0
For S0ix, GFX is in GFXOFF state, avoid to touch the GFX registers
to configure the fence driver interrupts for rings that belong to GFX.
The interrupts configuration will be restored by GFXOFF exit.
Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Return 0 when drm device alloc failed with -ENOSPC in
order to allow amdgpu drive loading. But the xcp without
drm device node assigned won't be visiable in user space.
This helps amdgpu driver loading on system which has more
than 64 nodes, the current limitation.
The proposal to add more drm nodes is discussed in public,
which will support up to 2^20 nodes totally.
kernel drm:
https://lore.kernel.org/lkml/20230724211428.3831636-1-michal.winiarski@intel.com/T/
libdrm:
https://gitlab.freedesktop.org/mesa/drm/-/merge_requests/305
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update addresses of PCIE link width registers,
& link width format used to populate gpu metrics
table for smu v13.0.6
v2:
Removed ESM register update
v3:
Updated patch subject and message
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Temperature needs to be reported in millidegree Celsius.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the right metrics table version based on the firmware.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2720
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Umio Yasuno <coelacanth_dream@protonmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
The parameter amdgpu_mcbp shall have priority against the default value
calculated from the chip version.
User could disable mcbp by setting the parameter mcbp as zero.
v2: do not trigger preemption in sw ring muxer when mcbp is disabled.
Signed-off-by: Jiadong Zhu <Jiadong.Zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Geliang Tang says:
====================
As is described in the "How to use MPTCP?" section in MPTCP wiki [1]:
"Your app should create sockets with IPPROTO_MPTCP as the proto:
( socket(AF_INET, SOCK_STREAM, IPPROTO_MPTCP); ). Legacy apps can be
forced to create and use MPTCP sockets instead of TCP ones via the
mptcpize command bundled with the mptcpd daemon."
But the mptcpize (LD_PRELOAD technique) command has some limitations
[2]:
- it doesn't work if the application is not using libc (e.g. GoLang
apps)
- in some envs, it might not be easy to set env vars / change the way
apps are launched, e.g. on Android
- mptcpize needs to be launched with all apps that want MPTCP: we could
have more control from BPF to enable MPTCP only for some apps or all the
ones of a netns or a cgroup, etc.
- it is not in BPF, we cannot talk about it at netdev conf.
So this patchset attempts to use BPF to implement functions similer to
mptcpize.
The main idea is to add a hook in sys_socket() to change the protocol id
from IPPROTO_TCP (or 0) to IPPROTO_MPTCP.
[1]
https://github.com/multipath-tcp/mptcp_net-next/wiki
[2]
https://github.com/multipath-tcp/mptcp_net-next/issues/79
v14:
- Use getsockopt(MPTCP_INFO) to verify mptcp protocol intead of using
nstat command.
v13:
- drop "Use random netns name for mptcp" patch.
v12:
- update diag_* log of update_socket_protocol.
- add 'ip netns show' after 'ip netns del' to check if there is
a test did not clean up its netns.
- return libbpf_get_error() instead of -EIO for the error from
open_and_load().
- Use getsockopt(SOL_PROTOCOL) to verify mptcp protocol intead of
using 'ss -tOni'.
v11:
- add comments about outputs of 'ss' and 'nstat'.
- use "err = verify_mptcpify()" instead of using =+.
v10:
- drop "#ifdef CONFIG_BPF_JIT".
- include vmlinux.h and bpf_tracing_net.h to avoid defining some
macros.
- drop unneeded checks for mptcp.
v9:
- update comment for 'update_socket_protocol'.
v8:
- drop the additional checks on the 'protocol' value after the
'update_socket_protocol()' call.
v7:
- add __weak and __diag_* for update_socket_protocol.
v6:
- add update_socket_protocol.
v5:
- add bpf_mptcpify helper.
v4:
- use lsm_cgroup/socket_create
v3:
- patch 8: char cmd[128]; -> char cmd[256];
v2:
- Fix build selftests errors reported by CI
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/79
====================
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Implement a new test program mptcpify: if the family is AF_INET or
AF_INET6, the type is SOCK_STREAM, and the protocol ID is 0 or
IPPROTO_TCP, set it to IPPROTO_MPTCP. It will be hooked in
update_socket_protocol().
Extend the MPTCP test base, add a selftest test_mptcpify() for the
mptcpify case. Open and load the mptcpify test prog to mptcpify the
TCP sockets dynamically, then use start_server() and connect_to_fd()
to create a TCP socket, but actually what's created is an MPTCP
socket, which can be verified through 'getsockopt(SOL_PROTOCOL)'
and 'getsockopt(MPTCP_INFO)'.
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Link: https://lore.kernel.org/r/364e72f307e7bb38382ec7442c182d76298a9c41.1692147782.git.geliang.tang@suse.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
