Commit Graph

7 Commits

Author SHA1 Message Date
Guennadi Liakhovetski
48e971cd7f [media] V4L: sh_mobile_ceu_camera: maximum image size depends on the hardware version
Newer CEU versions, e.g., the one, used on sh7372, support image sizes
larger than 2560x1920. Retrieve maximum sizes from platform properties.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-03-19 22:11:06 -03:00
Guennadi Liakhovetski
6b526fed0e [media] V4L: sh_mobile_csi2: switch away from using the soc-camera bus notifier
This moves us one more step closer to eliminating the soc-camera bus
and devices on it. Besides, as a side effect, CSI-2 runtime PM on
sh-mobile secomes finer grained now: we only have to power on the
interface, when the device nodes are open.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:56:08 -03:00
Guennadi Liakhovetski
b3b5020d8c V4L/DVB: V4L2: sh_mobile_camera_ceu: add support for CSI2
Using CEU with CSI2 on SH-Mobile requires some special configuration of the
former. We also have to switch from calling only one subdev .s_mbus_fmt and
.try_mbus_fmt to calling all subdevices. Take care to increment CSI2 driver
use count to prevent it from unloading, while in use.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 16:43:40 -03:00
Kuninori Morimoto
85dc1cff0d V4L/DVB (13665): sh_mobile_ceu_camera: Add support for sync polarity selection
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-16 09:27:35 -02:00
Kuninori Morimoto
c354b400c0 V4L/DVB (10671): sh_mobile_ceu: SOCAM flags are not platform dependent
sh_mobile_ceu_camera.c support for signal polarity flags isn't platform
dependent, provide them locally. Only the bus width is implementation
specific.

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Acked-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:42:52 -03:00
Stefan Herbrechtsmeier
8103466315 V4L/DVB (8687): soc-camera: Move .power and .reset from soc_camera host to sensor driver
Make .power and .reset callbacks per camera instead of per host, also move
their invocation to camera drivers.

.arch/arm/mach-pxa/include/mach/camera.h    |    2 -

Signed-off-by: Stefan Herbrechtsmeier <hbmeier@hni.uni-paderborn.de>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12 09:36:50 -02:00
Magnus Damm
0d3244d643 V4L/DVB (8342): sh_mobile_ceu_camera: Add SuperH Mobile CEU driver V3
This is V3 of the SuperH Mobile CEU soc_camera driver.

The CEU hardware block is configured in a transparent data fetch
mode, frames are captured from the attached camera and written to
physically contiguous memory buffers provided by the newly added
videobuf-dma-contig queue. Tested on sh7722 and sh7723 processors.

 Changes since V2:
 - remove SUPERH Kconfig dependency
 - move sh_mobile_ceu.h to include/media
 - add board callback support with enable_camera()/disable_camera()
 - add support for declare_coherent_memory
 - rework video memory limit
 - more verbose error messages

 Changes since V1:
 - fixed the CEU driver to work with the newly updated patches

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20 07:25:43 -03:00