MPU-6880 seems to be very similar to MPU-6500 and it works
fine with some minor additions for the mpu6050 driver.
Add the necessary defines for it and make it use the same registers
as MPU-6500 but with a FIFO size of 4096.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Acked-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
Cc: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
Link: https://lore.kernel.org/r/20201202104656.5119-2-stephan@gerhold.net
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
If we are using edge IRQs, new samples can arrive while processing
current interrupt since there are no hw guarantees the irq line
stays "low" long enough to properly detect the new interrupt.
In this case the new sample will be missed.
Polling FIFO status register in st_lsm6dsx_handler_thread routine
allow us to read new samples even if the interrupt arrives while
processing previous data and the timeslot where the line is "low"
is too short to be properly detected.
Fixes: 89ca88a7cd ("iio: imu: st_lsm6dsx: support active-low interrupts")
Fixes: 290a6ce11d ("iio: imu: add support to lsm6dsx driver")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/5e93cda7dc1e665f5685c53ad8e9ea71dbae782d.1605378871.git.lorenzo@kernel.org
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp assumes the buffer used is aligned
to the size of the timestamp (8 bytes). This is not guaranteed in
this driver which uses an array of smaller elements on the stack.
As Lars also noted this anti pattern can involve a leak of data to
userspace and that indeed can happen here. We close both issues by
moving to a suitable array in the iio_priv() data with alignment
explicitly requested. This data is allocated with kzalloc() so no
data can leak apart from previous readings.
In this driver, depending on which channels are enabled, the timestamp
can be in a number of locations. Hence we cannot use a structure
to specify the data layout without it being misleading.
Fixes: 77c4ad2d6a ("iio: imu: Add initial support for Bosch BMI160")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Cc: Daniel Baluta <daniel.baluta@gmail.com>
Cc: Daniel Baluta <daniel.baluta@oss.nxp.com>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200920112742.170751-6-jic23@kernel.org
The comment implies this device has 3 sensor types, but it only
has an accelerometer and a gyroscope (both 3D). As such the
buffer does not need to be as long as stated.
Note I've separated this from the following patch which fixes
the alignment for passing to iio_push_to_buffers_with_timestamp()
as they are different issues even if they affect the same line
of code.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Cc: Daniel Baluta <daniel.baluta@oss.nxp.com>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200920112742.170751-5-jic23@kernel.org
As we no longer support a try again if we cannot reenable the trigger
rename the function to reflect this. Also we don't do anything with
the value returned so stop it returning anything. For the few drivers
that didn't already print an error message in this patch, add such
a print.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Christian Oder <me@myself5.de>
Cc: Eugen Hristev <eugen.hristev@microchip.com>
Cc: Nishant Malpani <nish.malpani25@gmail.com>
Cc: Daniel Baluta <daniel.baluta@oss.nxp.com>
Link: https://lore.kernel.org/r/20200920132548.196452-3-jic23@kernel.org
Usual mixed bag of new drivers / device support + cleanups etc with the
addition of a fairly big set of yaml conversions.
Txt to yaml format conversions.
In some cases dropped separate binding and moved to trivial devices (drop).
Listed by manufacturer
- dht11 temperature(drop)
- adi,ad2s90 adi,ad5272 adi,ad5592r adi,ad5758 adi,ad5933 adi,ad7303
adi,adis16480 adi,adf4350
- ams,as3935
- asahi-kasei,ak8974
- atmel,sama5d2-adc
- avago,apds9300 avago,apds9960
- bosch,bma180 bosch,bmc150_magn bosch,bme680 bosch,bmg180
- brcm,iproc-static-adc
- capella,cm36651
- domintech,dmard06(drop)
- fsl,mag3110 fsl,mma8452 fsl,vf610-dac
- hoperf,hp03
- honeywell,hmc5843
- kionix,kxcjk1013
- maxim,ds1803(drop) maxim,ds4424 maxim,max30100 maxim,max30102
maxim,max31856 maxim,max31855k maxim,max44009
maxim,max5481 maxim,max5821
- meas,htu21(drop) meas,ms5367(drop) meas,ms5611 meas,tsys01(drop)
- mediatek,mt2701-auxadc
- melexis,mlx90614 melexis,mlx90632
- memsic,mmc35240(drop)
- microchip,mcp41010 microchip,mcp4131 microchip,mcp4725
- murata,zap2326
- nxp,fxas21002c nxp,lpc1850-dac
- pni,rm3100
- qcom,pm8018-adc qcom,spmi-iadc
- renesas,isl29501 renesas,rcar-gyroadc
- samsung,sensorhub-rinato
- sensiron,sgp30
- sentech,sx9500
- sharp,gp2ap020a00f
- st,hts221 st,lsm6dsx st,st-sensors(many!) st,uvis25 st,vcl53l0x st,vl6180
- ti,adc084s021 ti,ads124s08
ti,dac5571 ti,dac7311 ti,dac7512 ti,dac7612
ti,hdc1000(drop) ti,palmas-gpadc ti,opt3001 ti,tmp07
- upisemi,us51882
- vishay,vcnl4035
- x-powers,axp209
New device support
* adi,ad5685
- Add support for AD5338R dual output 10-bit DAC
- Add DT-binding doc.
* mediatek,mt6360
- New driver for this SoC ADC with bindings and using new channel label
support in the IIO core.
* st,lsm6dsx
- Add support for LSM6DST
Core:
* Add "label" to device channels, provided via a new core callback. Including
DT docs for when that is the source, and ABI docs.
* Add devm_iio_triggered_buffer_setup_ext to take extra attributes.
* dmaengine, unwrap use of iio_buffer_set_attrs()
* Drop iio_buffer_set_attrs()
* Centralize ioctl call handling. Later fix to ensure -EINVAL returned if
no handler has run.
* Fix an issue with IIO_VAL_FRACTIONAL and negative values - doesn't affect
any known existing drivers, but will impact a future one.
* kernel-doc fix in trigger.h
* file-ops ordering cleanup
Features
* semtech,sx9310
- Add control of hardware gain, proximity thresholds, hysteresis and
debounce.
- Increase what information on hardware configuration can be provided
via DT.
Cleanup and minor features
* adi,ad5685
- Add of_match_table
* adi,ad7292
- Drop pointless spi_set_drvdata() call
* adi,ad7298
- Drop platform data and tidy up external reference config.
* adi,ad7303
- Drop platform data handling as unused.
* adi,ad7768
- Add new label attribute for channels provided from dt.
* adi,ad7887
- devm_ usage in probe simplifying remove and error handling.
* adi,adis16201
- Drop pointless spi_set_drvdata() call
* adi,adis16209
- Drop pointless spi_set_drvdata() call
* adi,adis16240
- White space fixup
* adi,adxl372
- use new devm_iio_triggered-buffer_setup_ext()
* amlogic,meson-saradc
- Drop pointless semicolon.
* amstaos,tsl2563
- Put back i2c_device_id table as needed for greybus probing.
* atmel,at91_adc
- Use of_device_get_match_data() instead of open coding it.
- Constify some driver data
- Add KCONFIG dep on CONFIG_OF and drop of_match_ptr()
- Drop platform data as mostly dead code.
- Tidy up reference voltage logic
* atmel-sama5d2
- Drop a pointless semicolon
- Merge buffer and trigger init into a separate function
- Use new devm_iio_triggered_buff_setup_ext()
* avago,apds9960
- Drop a pointless semicolon
* bosch,bmc150
- Drop a pointless semicolon
- Use new iio_triggered_buffer_setup_ext()
* bosch,bmp280
- Drop a pointless semicolon
* fsl,mma8452
- Constification
* (google),cros_ec
- Use new devm_iio_triggered_buffer_setup_ext()
* hid-sensors
- Use new iio_triggered_buffer_setup_ext()
* ingenic,adc
- Drop a pointless semicolon
* invensense,icm426xx
- Fix MAINTAINERS entry missing :
* mediatek,mt6577_audxac
- Add binding doc for mt8516 compatible with mt8173
* motorola,cpcap-adc
- Fix an implicit fallthrough marking that clang needs to avoid warning.
* samsung,exynos-adc
- Stop relying on users counter form input device in ISR.
* st,lsm6dsx
- add vdd and vddio regulator control (including binding update)
* st,stm32-adc
- Tidy up code for dma transfers.
- Adapt clock duty cycle for proper functioning. Note no known problems
with existing boards.
* st,vl53l0x-i2c
- Put back i2c_device_id table as needed for greybus probing.
* vishay,vcnl4035
- Put back i2c_device_id table as needed for greybus probing.
-----BEGIN PGP SIGNATURE-----
iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAl+8H3IRHGppYzIzQGtl
cm5lbC5vcmcACgkQVIU0mcT0FogLLA//cE+rUI0ztkE5KD1DY5mu8dy3GotLJe2y
kVlYao/8H4n3qL9Sm+i47v7pZZfB6UH5jaPa3BqXcGU3HaBaTSza5VhP/hDyfpgD
Nt46UyE0FxcNEpwqiiyVuVFFx9ifUOayzKwL9ckyPs7n1X6ecZA+sPdmSQLmFzoZ
IYDR148UxlAr33j7DVF1DLiIdObCIpNc3pn7YDflT/NnXvRY2XgIjqeOiPbldVgm
8nGgeSQXTyYBKaSyv6seE2qaxyDAhjkz7SVOidWZxPgMjiJJmpRdL3yCn2wVCCCy
eLh9Ez0zPhywOhsRImICZ9ds0+Wq1Ke2kVqo0N8FJtB+JVZig+R1ElTaUKhES7B2
zKW1PR3nknP2oo3LWoXL6QR4vm0RcasRYnE2Qmtv6y04Hv3vbdyx6ZW+WCwrlsM8
fCxHV/m/NN4piTHEFFFkW912GMZM4XqnJ/H4bLd4oA+HP/2vzMuzdBLKZPZRdYYf
Xd2YTF+iyNYlbN+ZLDd9840cAcKabPsd+ptaJh7lb0MUPPcv5qukhwIBs1/vqrE6
9/AnJ/Wj/oQZoDbcrgnMVoRn8dxqnQkd883sxiHZAvztEn1CQ9dDyUfKlHHB5BOD
GhtrEyMn87VWM19yqArW/3ZU7dPBbXHkzlw6FQ67gIYbqaCRwfRi26FCJh0C6Kzi
auCmjubaALo=
=kkcj
-----END PGP SIGNATURE-----
Merge tag 'iio-for-5.11a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
First set of new device support, features and cleanups for IIO in the 5.11 cycle
Usual mixed bag of new drivers / device support + cleanups etc with the
addition of a fairly big set of yaml conversions.
Txt to yaml format conversions.
In some cases dropped separate binding and moved to trivial devices (drop).
Listed by manufacturer
- dht11 temperature(drop)
- adi,ad2s90 adi,ad5272 adi,ad5592r adi,ad5758 adi,ad5933 adi,ad7303
adi,adis16480 adi,adf4350
- ams,as3935
- asahi-kasei,ak8974
- atmel,sama5d2-adc
- avago,apds9300 avago,apds9960
- bosch,bma180 bosch,bmc150_magn bosch,bme680 bosch,bmg180
- brcm,iproc-static-adc
- capella,cm36651
- domintech,dmard06(drop)
- fsl,mag3110 fsl,mma8452 fsl,vf610-dac
- hoperf,hp03
- honeywell,hmc5843
- kionix,kxcjk1013
- maxim,ds1803(drop) maxim,ds4424 maxim,max30100 maxim,max30102
maxim,max31856 maxim,max31855k maxim,max44009
maxim,max5481 maxim,max5821
- meas,htu21(drop) meas,ms5367(drop) meas,ms5611 meas,tsys01(drop)
- mediatek,mt2701-auxadc
- melexis,mlx90614 melexis,mlx90632
- memsic,mmc35240(drop)
- microchip,mcp41010 microchip,mcp4131 microchip,mcp4725
- murata,zap2326
- nxp,fxas21002c nxp,lpc1850-dac
- pni,rm3100
- qcom,pm8018-adc qcom,spmi-iadc
- renesas,isl29501 renesas,rcar-gyroadc
- samsung,sensorhub-rinato
- sensiron,sgp30
- sentech,sx9500
- sharp,gp2ap020a00f
- st,hts221 st,lsm6dsx st,st-sensors(many!) st,uvis25 st,vcl53l0x st,vl6180
- ti,adc084s021 ti,ads124s08
ti,dac5571 ti,dac7311 ti,dac7512 ti,dac7612
ti,hdc1000(drop) ti,palmas-gpadc ti,opt3001 ti,tmp07
- upisemi,us51882
- vishay,vcnl4035
- x-powers,axp209
New device support
* adi,ad5685
- Add support for AD5338R dual output 10-bit DAC
- Add DT-binding doc.
* mediatek,mt6360
- New driver for this SoC ADC with bindings and using new channel label
support in the IIO core.
* st,lsm6dsx
- Add support for LSM6DST
Core:
* Add "label" to device channels, provided via a new core callback. Including
DT docs for when that is the source, and ABI docs.
* Add devm_iio_triggered_buffer_setup_ext to take extra attributes.
* dmaengine, unwrap use of iio_buffer_set_attrs()
* Drop iio_buffer_set_attrs()
* Centralize ioctl call handling. Later fix to ensure -EINVAL returned if
no handler has run.
* Fix an issue with IIO_VAL_FRACTIONAL and negative values - doesn't affect
any known existing drivers, but will impact a future one.
* kernel-doc fix in trigger.h
* file-ops ordering cleanup
Features
* semtech,sx9310
- Add control of hardware gain, proximity thresholds, hysteresis and
debounce.
- Increase what information on hardware configuration can be provided
via DT.
Cleanup and minor features
* adi,ad5685
- Add of_match_table
* adi,ad7292
- Drop pointless spi_set_drvdata() call
* adi,ad7298
- Drop platform data and tidy up external reference config.
* adi,ad7303
- Drop platform data handling as unused.
* adi,ad7768
- Add new label attribute for channels provided from dt.
* adi,ad7887
- devm_ usage in probe simplifying remove and error handling.
* adi,adis16201
- Drop pointless spi_set_drvdata() call
* adi,adis16209
- Drop pointless spi_set_drvdata() call
* adi,adis16240
- White space fixup
* adi,adxl372
- use new devm_iio_triggered-buffer_setup_ext()
* amlogic,meson-saradc
- Drop pointless semicolon.
* amstaos,tsl2563
- Put back i2c_device_id table as needed for greybus probing.
* atmel,at91_adc
- Use of_device_get_match_data() instead of open coding it.
- Constify some driver data
- Add KCONFIG dep on CONFIG_OF and drop of_match_ptr()
- Drop platform data as mostly dead code.
- Tidy up reference voltage logic
* atmel-sama5d2
- Drop a pointless semicolon
- Merge buffer and trigger init into a separate function
- Use new devm_iio_triggered_buff_setup_ext()
* avago,apds9960
- Drop a pointless semicolon
* bosch,bmc150
- Drop a pointless semicolon
- Use new iio_triggered_buffer_setup_ext()
* bosch,bmp280
- Drop a pointless semicolon
* fsl,mma8452
- Constification
* (google),cros_ec
- Use new devm_iio_triggered_buffer_setup_ext()
* hid-sensors
- Use new iio_triggered_buffer_setup_ext()
* ingenic,adc
- Drop a pointless semicolon
* invensense,icm426xx
- Fix MAINTAINERS entry missing :
* mediatek,mt6577_audxac
- Add binding doc for mt8516 compatible with mt8173
* motorola,cpcap-adc
- Fix an implicit fallthrough marking that clang needs to avoid warning.
* samsung,exynos-adc
- Stop relying on users counter form input device in ISR.
* st,lsm6dsx
- add vdd and vddio regulator control (including binding update)
* st,stm32-adc
- Tidy up code for dma transfers.
- Adapt clock duty cycle for proper functioning. Note no known problems
with existing boards.
* st,vl53l0x-i2c
- Put back i2c_device_id table as needed for greybus probing.
* vishay,vcnl4035
- Put back i2c_device_id table as needed for greybus probing.
* tag 'iio-for-5.11a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (126 commits)
dt-bindings:iio:adc:x-powers,axp209-adc: txt to yaml conversion
dt-bindings:iio:adc:renesas,rcar-gyroadc: txt to yaml conversion.
dt-bindings:iio:adc:atmel,sama5d2-adc: txt to yaml conversion
dt-bindings:iio:magnetometer:pni,rm3100: txt to yaml conversion.
dt-bindings:iio:magnetometer:honeywell,hmc5843: txt to yaml format conversion
dt-bindings:iio:magnetometer:bosch,bmc150_magn: txt to yaml conversion.
dt-bindings:iio:magnetometer:asahi-kasei,ak8974: txt to yaml format conversion
dt-bindings:iio:magnetometer:fsl,mag3110: txt to yaml conversion
dt-bindings:iio:light:st,vl6180: txt to yaml format conversion.
dt-bindings:iio:light:vishay,vcnl4035: txt to yaml conversion
dt-bindings:iio:light:st,uvis25: txt to yaml conversion for this UV sensor
dt-bindings:iio:light:upisemi,us51882: txt to yaml conversion.
dt-bindings:iio:light:ti,opt3001: txt to yaml conversion
dt-bindings:iio:light:maxim,max44009: txt to yaml conversion.
dt-bindings:iio:light:sharp,gp2ap020a00f: txt to yaml conversion.
dt-bindings:iio:light:capella,cm36651: txt to yaml conversion.
dt-bindings:iio:light:avago,apds9960: txt to yaml conversion
dt-bindings:iio:light:avago,apds9300: txt to yaml conversion.
dt-bindings:iio:imu:st,lsm6dsx: txt to yaml conversion
dt-bindings:iio:imu:adi,adis16480: txt to yaml conversion
...
Set 10ms as minimum i2c slave configuration timeout since st_lsm6dsx
relies on accel ODR for i2c master clock and at high sample rates
(e.g. 833Hz or 416Hz) the slave sensor occasionally may need more cycles
than i2c master timeout (2s/833Hz + 1 ~ 3ms) to apply the configuration
resulting in an uncomplete slave configuration and a constant reading
from the i2c slave connected to st_lsm6dsx i2c master.
Fixes: 8f9a5249e3 ("iio: imu: st_lsm6dsx: enable 833Hz sample frequency for tagged sensors")
Fixes: c91c1c844e ("iio: imu: st_lsm6dsx: add i2c embedded controller support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/a69c8236bf16a1569966815ed71710af2722ed7d.1604247274.git.lorenzo@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
A break is not needed if it is preceded by a return
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20201019172824.32166-1-trix@redhat.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
We have a couple of changes that apply to large sets of drivers, so
I have grouped those to keep this short.
There are a few late breaking fixes in here that can wait for the
merge window.
dt yaml conversions
-------------------
* adi,ad7768-1
* adi,ad7949
* aspeed,ast2400
* cosmic,10001-adc
* dlg,da9150-gpadc
* fsl,imx25-gcq
* fsl,imx7d-adc
* fsl,vf610
* holt,hi8435
* marvell,berlin2-adc
* motorola,cpcap-adc
* nuvoton,nau7802
* nuvoton,npcm750-adc
* nxp,lpc1850-adc
* nxp,lpc3220
* sprd,sc2720-adc
* st,stmpe-adc
* ti,adc12138
* ti,ads1015
* ti,ads7950
* ti,twl4030-madc
Features
--------
* adxrs290
- Add triggered buffer support and expose data ready signal as a possible
trigger. Includes updating bindings.
- Add debugfs hooks for register access.
* mlx90632
- Add a clear user interface to override the measured ambient temperature.
* vl53l0x
- Add IRQ support including dt bindings.
Cleanups and minor fixes
------------------------
(groups)
Replace mlock with local lock:
* adf4350
* exynos-adc
* fls-imx25-gcq
* stm32-dac
devm use to simplify probe error handling and remove functions.
* adis16201
* adis16203
* adis16209
* adis16240
* adis16136
* adis16260
* adis16400
* adis16460
* adis16480
* adis library - drop unused adis_setup_buffer_and_trigger()
of_match_ptr removal and incorrect ACPI binding removal
of_match_ptr() rarely makes sense in an IIO driver as space saving
is trivial and it breaks ACPI PRP0001 based instantiation.
Mostly this series is about removing examples that get copied into new
drivers.
* ad2s1200
* ad5272
* ad5446
* ad5592r
* ad5593r
* ad5703
* ak8974
* ak8975
* ams-iaq-core
* as3935
* atlas-sensor
* ds1803
* hdc100x
* htu21
* icp10100
* lmp91000
* pulsedlight
* max30102
* max5432
* max5481
* mcp4018
* mcp4131
* mcp4531
* mcp4725
* ms5611
* ms5637
* si7020
* sgp30
* ti-dac082s085
* ti-dac5571
* tmp007
* tsys01
* vz89x
* zpa2326
kernel-doc fixes
* iio-core
* ad7303
* ad7947
* adis16080
* adis16400
* iio_dummy_evgen
* sgp30
Fixes for buffer alignment when passed to iio_push_to_buffers_with_timestamp()
This is a long running effort. There are a few more drivers to come.
* inv_mpu6050
* itg3200
* si1145
* st_lsm6dsx
* ti-adc0832
* ti-adc12138
(not driver focused)
* MAINTAINERS
- Consolidate Analog Device IIO entries whilst removing Beniamin Bia.
- Remove Hartmut Knaack as a listed IIO maintainer as he hasn't been
active for a long time and people are getting intermitted bounces.
* Add __printf() markings to a few functions that were missing them.
* drop some rotted documentation from staging.
* rework buffer sysfs file creation (precursor to multiple buffer support)
(individual drivers)
* ad5592r
- Fix use of true for IIO_SHARED_BY_TYPE
- Tidy up locking and indentation.
* ad9467
- Improve error message on chip-id missmatch.
- Use more appropriate error value if chip-id not recognised.
* adis-library
- Simplify burst mode handling.
* adxrs290
- Make sure to switch device to standby mode during remove.
* as73211
- Increase measurement timeout as seems some devices are slower.
* bma180
- Fix use of true fo IIO_SHARED_BY_TYPE
* exynos_adc
- Update binding to require second interrut with touch screen.
- Update binding to not require syscon on S5Pv210
* hmc5843
- Fix use of true for IIO_SHARED_BY_TYPE
* inv_mpu6050
- Use regmap_noinc_read() for fifo reading.
* palmas_gpadc
- Use module_platform_driver() to remove boilerplate.
* meson-saradc
- style consistency fixes
* rockchip_saradc
- Allow compile testing with !ARM.
* st_lsm6dsx
- Changing scaling factor to use IIO_VAL_INT_PLUS_NANO to improve precision.
- Fix an issue with unchecked return value.
* stm32-adc
- Fix a missing return introduced in dev_err_probe() patch earlier in
cycle.
* sx9310
- Prefer async mode for probe as paticularly slow startup.
* vcnl4000
- Add missing interrupt property to dt binding.
-----BEGIN PGP SIGNATURE-----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=yrII
-----END PGP SIGNATURE-----
Merge tag 'iio-for-5.10b-take2' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
Second set of features and cleanups for IIO in 5.10
We have a couple of changes that apply to large sets of drivers, so
I have grouped those to keep this short.
There are a few late breaking fixes in here that can wait for the
merge window.
dt yaml conversions
-------------------
* adi,ad7768-1
* adi,ad7949
* aspeed,ast2400
* cosmic,10001-adc
* dlg,da9150-gpadc
* fsl,imx25-gcq
* fsl,imx7d-adc
* fsl,vf610
* holt,hi8435
* marvell,berlin2-adc
* motorola,cpcap-adc
* nuvoton,nau7802
* nuvoton,npcm750-adc
* nxp,lpc1850-adc
* nxp,lpc3220
* sprd,sc2720-adc
* st,stmpe-adc
* ti,adc12138
* ti,ads1015
* ti,ads7950
* ti,twl4030-madc
Features
--------
* adxrs290
- Add triggered buffer support and expose data ready signal as a possible
trigger. Includes updating bindings.
- Add debugfs hooks for register access.
* mlx90632
- Add a clear user interface to override the measured ambient temperature.
* vl53l0x
- Add IRQ support including dt bindings.
Cleanups and minor fixes
------------------------
(groups)
Replace mlock with local lock:
* adf4350
* exynos-adc
* fls-imx25-gcq
* stm32-dac
devm use to simplify probe error handling and remove functions.
* adis16201
* adis16203
* adis16209
* adis16240
* adis16136
* adis16260
* adis16400
* adis16460
* adis16480
* adis library - drop unused adis_setup_buffer_and_trigger()
of_match_ptr removal and incorrect ACPI binding removal
of_match_ptr() rarely makes sense in an IIO driver as space saving
is trivial and it breaks ACPI PRP0001 based instantiation.
Mostly this series is about removing examples that get copied into new
drivers.
* ad2s1200
* ad5272
* ad5446
* ad5592r
* ad5593r
* ad5703
* ak8974
* ak8975
* ams-iaq-core
* as3935
* atlas-sensor
* ds1803
* hdc100x
* htu21
* icp10100
* lmp91000
* pulsedlight
* max30102
* max5432
* max5481
* mcp4018
* mcp4131
* mcp4531
* mcp4725
* ms5611
* ms5637
* si7020
* sgp30
* ti-dac082s085
* ti-dac5571
* tmp007
* tsys01
* vz89x
* zpa2326
kernel-doc fixes
* iio-core
* ad7303
* ad7947
* adis16080
* adis16400
* iio_dummy_evgen
* sgp30
Fixes for buffer alignment when passed to iio_push_to_buffers_with_timestamp()
This is a long running effort. There are a few more drivers to come.
* inv_mpu6050
* itg3200
* si1145
* st_lsm6dsx
* ti-adc0832
* ti-adc12138
(not driver focused)
* MAINTAINERS
- Consolidate Analog Device IIO entries whilst removing Beniamin Bia.
- Remove Hartmut Knaack as a listed IIO maintainer as he hasn't been
active for a long time and people are getting intermitted bounces.
* Add __printf() markings to a few functions that were missing them.
* drop some rotted documentation from staging.
* rework buffer sysfs file creation (precursor to multiple buffer support)
(individual drivers)
* ad5592r
- Fix use of true for IIO_SHARED_BY_TYPE
- Tidy up locking and indentation.
* ad9467
- Improve error message on chip-id missmatch.
- Use more appropriate error value if chip-id not recognised.
* adis-library
- Simplify burst mode handling.
* adxrs290
- Make sure to switch device to standby mode during remove.
* as73211
- Increase measurement timeout as seems some devices are slower.
* bma180
- Fix use of true fo IIO_SHARED_BY_TYPE
* exynos_adc
- Update binding to require second interrut with touch screen.
- Update binding to not require syscon on S5Pv210
* hmc5843
- Fix use of true for IIO_SHARED_BY_TYPE
* inv_mpu6050
- Use regmap_noinc_read() for fifo reading.
* palmas_gpadc
- Use module_platform_driver() to remove boilerplate.
* meson-saradc
- style consistency fixes
* rockchip_saradc
- Allow compile testing with !ARM.
* st_lsm6dsx
- Changing scaling factor to use IIO_VAL_INT_PLUS_NANO to improve precision.
- Fix an issue with unchecked return value.
* stm32-adc
- Fix a missing return introduced in dev_err_probe() patch earlier in
cycle.
* sx9310
- Prefer async mode for probe as paticularly slow startup.
* vcnl4000
- Add missing interrupt property to dt binding.
* tag 'iio-for-5.10b-take2' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (126 commits)
dt-bindings: iio: vishay,vcnl4000: add interrupts property
iio:imu:inv_mpu6050: Use regmap_noinc_read for fifo reads.
iio:imu:inv_mpu6050 Fix dma and ts alignment and data leak issues.
iio:adc:ti-adc12138 Fix alignment issue with timestamp
iio:adc:ti-adc0832 Fix alignment issue with timestamp
iio:imu:st_lsm6dsx Fix alignment and data leak issues
iio:light:si1145: Fix timestamp alignment and prevent data leak.
iio:gyro:itg3200: Fix timestamp alignment and prevent data leak.
iio:imu:st_lsm6dsx: check st_lsm6dsx_shub_read_output return
iio: adc: exynos_adc: Replace indio_dev->mlock with own device lock
dt-bindings:iio:adc:holt,hi8435 yaml conversion
dt-bindings:iio:adc:adi,ad7768-1 yaml conversion
dt-bindings:iio:adc:adi,ad7949 yaml conversion
dt-bindings:iio:adc:dlg,da9150-gpadc yaml conversion
dt-bindings:iio:adc:motorola,cpcap-adc yaml conversion
dt-bindings:iio:adc:nxp,lpc3220-adc yaml conversion
dt-bindings:iio:adc:nxp,lpc1850-adc yaml conversion
dt-bindings:iio:adc:fsl,imx25-gcq yaml conversion
dt-bindings:iio:adc:fsl,imx7d-adc yaml conversion
dt-bindings:iio:adc:ti,ads1015 yaml conversion
...
We should not be assuming that we are reading a sequence of
registers as here we are doing a read of a lot of data from
a single register address.
Not marked for stable as by coincidence it being wrong doesn't
make any difference.
Suggested-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
Link: https://lore.kernel.org/r/20200722155103.979802-19-jic23@kernel.org
This case is a bit different to the rest of the series. The driver
was doing a regmap_bulk_read into a buffer that wasn't dma safe
as it was on the stack with no guarantee of it being in a cacheline
on it's own. Fixing that also dealt with the data leak and
alignment issues that Lars-Peter pointed out.
Also removed some unaligned handling as we are now aligned.
Fixes tag is for the dma safe buffer issue. Potentially we would
need to backport timestamp alignment futher but that is a totally
different patch.
Fixes: fd64df16f4 ("iio: imu: inv_mpu6050: Add SPI support for MPU6000")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200722155103.979802-18-jic23@kernel.org
One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp assumes the buffer used is aligned
to the size of the timestamp (8 bytes). This is not guaranteed in
this driver which uses an array of smaller elements on the stack.
As Lars also noted this anti pattern can involve a leak of data to
userspace and that indeed can happen here. We close both issues by
moving to an array of suitable structures in the iio_priv() data.
This data is allocated with kzalloc so no data can leak apart from
previous readings.
For the tagged path the data is aligned by using __aligned(8) for
the buffer on the stack.
There has been a lot of churn in this driver, so likely backports
may be needed for stable.
Fixes: 290a6ce11d ("iio: imu: add support to lsm6dsx driver")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200722155103.979802-17-jic23@kernel.org
Potential error return is not checked. This can lead to use
of undefined data.
Detected by clang static analysis.
st_lsm6dsx_shub.c:540:8: warning: Assigned value is garbage or undefined
*val = (s16)le16_to_cpu(*((__le16 *)data));
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: c91c1c844e ("iio: imu: st_lsm6dsx: add i2c embedded controller support")
Signed-off-by: Tom Rix <trix@redhat.com
Cc: <Stable@vger.kernel.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20200809175551.6794-1-trix@redhat.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Scaling factor values for Acc lead to an unacceptable rounding of the
full scale (FS) calculated by some SensorHAL on Android devices. For examples
setting FS to 4g the in_accel_x_scale, in_accel_y_scale and in_accel_z_scale
are 0.001196 on 6 decimal digits and the FS is
0.001196 × ((2^15) − 1) ~= 39.1893 m/s^2.
Android CTS R10 SensorParameterRangeTest test expects a value greater than
39.20 m/s^2 so this test fails (ACCELEROMETER_MAX_RANGE = 4 * 9.80).
Using 9 decimal digits the new scale factor is 0.001196411 and the FS now
is 0.001196411 × ((2^15)−1) ~= 39.2028 m/s^2.
This patch extends to IIO_VAL_INT_PLUS_NANO type the scaling factor to all
IMU devices where SensorParameterRangeTest CTS test fails.
Signed-off-by: Mario Tesi <mario.tesi@st.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/1600361236-2285-1-git-send-email-martepisa@gmail.com
Burst mode variables are now part of the `adis_data` struct. The driver
also has now to explicitly define the length of the burst buffer.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20200917155223.218500-4-nuno.sa@analog.com
Burst mode variables are now part of the `adis_data` struct. The driver
also has now to explicitly define the length of the burst buffer.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20200917155223.218500-3-nuno.sa@analog.com
Add burst mode variables in the per device specific data structure. As
some drivers support multiple devices with different burst sizes it
makes sense this data to be in `adis_data`. While moving the variables,
there are two main differences:
1. The `en`variable is dropped. If a device supports burst mode, it will
just use it as it will has better performance for almost all real use
cases.
2. Replace `extra_len` by `burst_len`. Users should now explicitly
define the length of the burst buffer as it is typically constant. This
also allows to remove the following line from the library:
```
/* All but the timestamp channel */
burst_length = (indio_dev->num_channels - 1) * sizeof(u16);
```
The library should not assume that a timestamp channel is defined.
Moreover, most parts also include some diagnostic data, crc, etc.. in
the burst buffer that needed to be included in an `extra_len` variable
which is not that nice. On top of this, some devices already start to
have some 32bit size channels ...
This patch is also a move to completely drop the `struct adis_burst`
from the library.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20200917155223.218500-2-nuno.sa@analog.com
I'd like to be enable W=1 for all IIO builds as it catches real issues as well
as more minor documentation issues such as this (also good to fix though!)
drivers/iio/imu/adis16400.c:183: warning: Function parameter or member 'avail_scan_mask' not described in 'adis16400_state'
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Cc: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20200913132115.800131-2-jic23@kernel.org
Drop `adis_setup_buffer_and_trigger()`. All users were updated to use
the devm version of this function. This avoids having almost the same
code repeated.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20200915120258.161587-11-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use the adis managed device functions to setup the buffer and the trigger.
The ultimate goal will be to completely drop the non devm version from
the lib.
Since we are here, drop the `.remove` callback by further using devm
functions.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20200915120258.161587-8-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use the adis managed device functions to setup the buffer and the trigger.
The ultimate goal will be to completely drop the non devm version from
the lib.
Since we are here, drop the `.remove` callback by further using devm
functions.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20200915120258.161587-7-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use the adis managed device functions to setup the buffer and the trigger.
The ultimate goal will be to completely drop the non devm version from
the lib.
Since we are here, drop the `.remove` callback by further using devm
functions.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20200915120258.161587-6-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Common pattern of handling deferred probe can be simplified with
dev_err_probe(). Less code and also it prints the error value.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
Link: https://lore.kernel.org/r/20200829064726.26268-13-krzk@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reset hw time samples generator after system resume in order to avoid
disalignment between system and device time reference since FIFO
batching and time samples generator are disabled during suspend.
Fixes: 213451076b ("iio: imu: st_lsm6dsx: add hw timestamp support")
Tested-by: Sean Nyekjaer <sean@geanix.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
It doesn't make sense to move it into '*core*' as it's co-located with
other, similar definitions which are used in multiple locations.
Fixes the following W=1 kernel build warning(s):
In file included from drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c:17:
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h:497:44: warning: ‘st_lsm6dsx_accel_ext_info’ defined but not used [-Wunused-const-variable=]
497 | static const struct iio_chan_spec_ext_info st_lsm6dsx_accel_ext_info[] = {
| ^~~~~~~~~~~~~~~~~~~~~~~~~
In file included from drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c:17:
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h:497:44: warning: ‘st_lsm6dsx_accel_ext_info’ defined but not used [-Wunused-const-variable=]
497 | static const struct iio_chan_spec_ext_info st_lsm6dsx_accel_ext_info[] = {
| ^~~~~~~~~~~~~~~~~~~~~~~~~
In file included from drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c:16:
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h:497:44: warning: ‘st_lsm6dsx_accel_ext_info’ defined but not used [-Wunused-const-variable=]
497 | static const struct iio_chan_spec_ext_info st_lsm6dsx_accel_ext_info[] = {
| ^~~~~~~~~~~~~~~~~~~~~~~~~
Cc: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
Cc: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
No attempt has been made to document any of the demoted functions here.
Fixes the following W=1 kernel build warning(s):
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c:174: warning: Function parameter or member 'hw' not described in 'st_lsm6dsx_shub_read_output'
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c:174: warning: Function parameter or member 'data' not described in 'st_lsm6dsx_shub_read_output'
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c:174: warning: Function parameter or member 'len' not described in 'st_lsm6dsx_shub_read_output'
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c:205: warning: Function parameter or member 'hw' not described in 'st_lsm6dsx_shub_write_reg'
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c:205: warning: Function parameter or member 'addr' not described in 'st_lsm6dsx_shub_write_reg'
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c:205: warning: Function parameter or member 'data' not described in 'st_lsm6dsx_shub_write_reg'
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c:205: warning: Function parameter or member 'len' not described in 'st_lsm6dsx_shub_write_reg'
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c:285: warning: Function parameter or member 'sensor' not described in 'st_lsm6dsx_shub_read'
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c:285: warning: Function parameter or member 'addr' not described in 'st_lsm6dsx_shub_read'
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c:285: warning: Function parameter or member 'data' not described in 'st_lsm6dsx_shub_read'
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c:285: warning: Function parameter or member 'len' not described in 'st_lsm6dsx_shub_read'
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c:335: warning: Function parameter or member 'sensor' not described in 'st_lsm6dsx_shub_write'
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c:335: warning: Function parameter or member 'addr' not described in 'st_lsm6dsx_shub_write'
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c:335: warning: Function parameter or member 'data' not described in 'st_lsm6dsx_shub_write'
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c:335: warning: Function parameter or member 'len' not described in 'st_lsm6dsx_shub_write'
Cc: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This is the only use of kerneldoc in the source file and no
descriptions are provided.
Fixes the following W=1 kernel build warning(s):
drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c:118: warning: Function parameter or member 'irq' not described in 'inv_mpu6050_read_fifo'
drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c:118: warning: Function parameter or member 'p' not described in 'inv_mpu6050_read_fifo'
Cc: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
No attempt has been made to document any of the demoted functions here.
Fixes the following W=1 kernel build warning(s):
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c:444: warning: Function parameter or member 'st' not described in 'inv_mpu6050_set_lpf_regs'
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c:444: warning: Function parameter or member 'val' not described in 'inv_mpu6050_set_lpf_regs'
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c:480: warning: Function parameter or member 'indio_dev' not described in 'inv_mpu6050_init_config'
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c:862: warning: Function parameter or member 'st' not described in 'inv_mpu6050_set_lpf'
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c:862: warning: Function parameter or member 'rate' not described in 'inv_mpu6050_set_lpf'
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c:893: warning: Function parameter or member 'dev' not described in 'inv_mpu6050_fifo_rate_store'
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c:893: warning: Function parameter or member 'attr' not described in 'inv_mpu6050_fifo_rate_store'
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c:893: warning: Function parameter or member 'buf' not described in 'inv_mpu6050_fifo_rate_store'
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c:893: warning: Function parameter or member 'count' not described in 'inv_mpu6050_fifo_rate_store'
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c:954: warning: Function parameter or member 'dev' not described in 'inv_fifo_rate_show'
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c:954: warning: Function parameter or member 'attr' not described in 'inv_fifo_rate_show'
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c:954: warning: Function parameter or member 'buf' not described in 'inv_fifo_rate_show'
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c:975: warning: Function parameter or member 'dev' not described in 'inv_attr_show'
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c:975: warning: Function parameter or member 'attr' not described in 'inv_attr_show'
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c:975: warning: Function parameter or member 'buf' not described in 'inv_attr_show'
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c:1282: warning: Function parameter or member 'st' not described in 'inv_check_and_setup_chip'
Cc: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Fixes the following W=1 kernel build warning(s):
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h:487:1: warning: ‘inline’ is not at beginning of declaration [-Wold-style-declaration]
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h:497:44: warning: ‘st_lsm6dsx_accel_ext_info’ defined but not used [-Wunused-const-variable=]
Cc: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
Cc: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Kerneldoc expects attributes/parameters to be in '@*.: ' format.
Fixes the following W=1 kernel build warning(s):
drivers/iio/imu/kmx61.c:327: warning: Function parameter or member 'data' not described in 'kmx61_set_mode'
drivers/iio/imu/kmx61.c:327: warning: Function parameter or member 'mode' not described in 'kmx61_set_mode'
drivers/iio/imu/kmx61.c:327: warning: Function parameter or member 'device' not described in 'kmx61_set_mode'
drivers/iio/imu/kmx61.c:327: warning: Function parameter or member 'update' not described in 'kmx61_set_mode'
drivers/iio/imu/kmx61.c:731: warning: Function parameter or member 'data' not described in 'kmx61_set_power_state'
drivers/iio/imu/kmx61.c:731: warning: Function parameter or member 'on' not described in 'kmx61_set_power_state'
drivers/iio/imu/kmx61.c:731: warning: Function parameter or member 'device' not described in 'kmx61_set_power_state'
Cc: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The value retrieved by `irqd_get_trigger_type()` is not an irq flag.
While the values are the same, the meaning is different.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add a timestamping mechanism for buffer that provides accurate
event timestamps when using watermark. This mechanism estimates
device internal clock by comparing FIFO interrupts delta time and
device elapsed time computed by parsing FIFO data.
Take interrupt timestamp in hard irq handler and add IIO device
specific timestamp structures in device private allocation.
Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add all FIFO parsing and reading functions. Add accel and gyro
kfifo buffer and FIFO data parsing. Use device interrupt for
reading data FIFO and launching accel and gyro parsing.
Support hwfifo watermark by multiplexing gyro and accel settings.
Support hwfifo flush.
Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add INT1 interrupt support. Support interrupt edge and level,
active high or low. Push-pull or open-drain configurations.
Interrupt will be used to read data from the FIFO.
Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add temperature channel in gyroscope and accelerometer devices.
Temperature is available in full 16 bits resolution when reading
register and in low 8 bits resolution in the FIFO. Return full
precision raw temperature with corresponding scale and offset.
Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add SPI driver for InvenSense ICM-426xxx devices.
Configure bus signal slew rates as indicated in the datasheet.
Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add I2C driver for InvenSense ICM-426xxx devices.
Configure bus signal slew rates as indicated in the datasheet.
Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Core component of a new driver for InvenSense ICM-426xx devices.
It includes registers definition, main probe/setup, and device
utility functions.
ICM-426xx devices are latest generation of 6-axis IMU,
gyroscope+accelerometer and temperature sensor. This device
includes a 2K FIFO, supports I2C/I3C/SPI, and provides
intelligent motion features like pedometer, tilt detection,
and tap detection.
Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
These were found by doing some shell magic:
------------
for file in $(git grep -w devm_iio_device_alloc | cut -d: -f1 | sort | uniq) ; do
if grep 'parent =' $file | grep -v trig | grep -vq devm_; then
echo "$file -> $(grep "parent =" $file)"
fi
done
-----------
The output is bearable [after the semantic patch is applied].
There is a mix of trigger assignments with some iio device parent
assignments that are removed via this patch.
JC: A few more added via inspection of all parent =
statements in drivers/iio. Some of these may just have crossed with this
series, others were less obvious to scripting due to some cross
file / module boundary calls.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This patch applies the semantic patch:
@@
expression I, P, SP;
@@
I = devm_iio_device_alloc(P, SP);
...
- I->dev.parent = P;
It updates 302 files and does 307 deletions.
This semantic patch also removes some comments like
'/* Establish that the iio_dev is a child of the i2c device */'
But this is is only done in case where the block is left empty.
The patch does not seem to cover all cases. It looks like in some cases a
different variable is used in some cases to assign the parent, but it
points to the same reference.
In other cases, the block covered by ... may be just too big to be covered
by the semantic patch.
However, this looks pretty good as well, as it does cover a big bulk of the
drivers that should remove the parent assignment.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add mount-matrix binding support. As chip could have different orientations
a mount matrix support is needed to correctly translate these differences.
Signed-off-by: Jonathan Albrieux <jonathan.albrieux@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
