Introduce AMD CDX bus, which provides a mechanism for scanning
and probing CDX devices. These devices are memory mapped on
system bus for Application Processors(APUs).
CDX devices can be changed dynamically in the Fabric and CDX
bus interacts with CDX controller to rescan the bus and
rediscover the devices.
Signed-off-by: Nipun Gupta <nipun.gupta@amd.com>
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Tested-by: Nikhil Agarwal <nikhil.agarwal@amd.com>
Link: https://lore.kernel.org/r/20230313132636.31850-2-nipun.gupta@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
modpost now reads CRCs from .*.cmd files, parsing them using strtol().
This is inconsistent with its parsing of Module.symvers and with their
definition as *unsigned* 32-bit values.
strtol() clamps values to [LONG_MIN, LONG_MAX], and when building on a
32-bit system this changes all CRCs >= 0x80000000 to be 0x7fffffff.
Change extract_crcs_for_object() to use strtoul() instead.
Cc: stable@vger.kernel.org
Fixes: f292d875d0 ("modpost: extract symbol versions from *.cmd files")
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
- Support zstd-compressed debug info
- Allow W=1 builds to detect objects shared among multiple modules
- Add srcrpm-pkg target to generate a source RPM package
- Make the -s option detection work for future GNU Make versions
- Add -Werror to KBUILD_CPPFLAGS when CONFIG_WERROR=y
- Allow W=1 builds to detect -Wundef warnings in any preprocessed files
- Raise the minimum supported version of binutils to 2.25
- Use $(intcmp ...) to compare integers if GNU Make >= 4.4 is used
- Use $(file ...) to read a file if GNU Make >= 4.2 is used
- Print error if GNU Make older than 3.82 is used
- Allow modpost to detect section mismatches with Clang LTO
- Include vmlinuz.efi into kernel tarballs for arm64 CONFIG_EFI_ZBOOT=y
-----BEGIN PGP SIGNATURE-----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=Ig/Y
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Support zstd-compressed debug info
- Allow W=1 builds to detect objects shared among multiple modules
- Add srcrpm-pkg target to generate a source RPM package
- Make the -s option detection work for future GNU Make versions
- Add -Werror to KBUILD_CPPFLAGS when CONFIG_WERROR=y
- Allow W=1 builds to detect -Wundef warnings in any preprocessed files
- Raise the minimum supported version of binutils to 2.25
- Use $(intcmp ...) to compare integers if GNU Make >= 4.4 is used
- Use $(file ...) to read a file if GNU Make >= 4.2 is used
- Print error if GNU Make older than 3.82 is used
- Allow modpost to detect section mismatches with Clang LTO
- Include vmlinuz.efi into kernel tarballs for arm64 CONFIG_EFI_ZBOOT=y
* tag 'kbuild-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (29 commits)
buildtar: fix tarballs with EFI_ZBOOT enabled
modpost: Include '.text.*' in TEXT_SECTIONS
padata: Mark padata_work_init() as __ref
kbuild: ensure Make >= 3.82 is used
kbuild: refactor the prerequisites of the modpost rule
kbuild: change module.order to list *.o instead of *.ko
kbuild: use .NOTINTERMEDIATE for future GNU Make versions
kconfig: refactor Makefile to reduce process forks
kbuild: add read-file macro
kbuild: do not sort after reading modules.order
kbuild: add test-{ge,gt,le,lt} macros
Documentation: raise minimum supported version of binutils to 2.25
kbuild: add -Wundef to KBUILD_CPPFLAGS for W=1 builds
kbuild: move -Werror from KBUILD_CFLAGS to KBUILD_CPPFLAGS
kbuild: Port silent mode detection to future gnu make.
init/version.c: remove #include <generated/utsrelease.h>
firmware_loader: remove #include <generated/utsrelease.h>
modpost: Mark uuid_le type to be suitable only for MEI
kbuild: add ability to make source rpm buildable using koji
kbuild: warn objects shared among multiple modules
...
Commit 6c730bfc89 ("modpost: handle -ffunction-sections") added
".text.*" to the OTHER_TEXT_SECTIONS macro to fix certain section
mismatch warnings. Unfortunately, this makes it impossible for modpost
to warn about section mismatches with LTO, which implies
'-ffunction-sections', as all functions are put in their own
'.text.<func_name>' sections, which may still reference functions in
sections they are not supposed to, such as __init.
Fix this by moving ".text.*" into TEXT_SECTIONS, so that configurations
with '-ffunction-sections' will see warnings about mismatched sections.
Link: https://lore.kernel.org/Y39kI3MOtVI5BAnV@google.com/
Reported-by: Vincent Donnefort <vdonnefort@google.com>
Reviewed-and-tested-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
scripts/Makefile.build replaces the suffix .o with .ko, then
scripts/Makefile.modpost calls the sed command to change .ko back
to the original .o suffix.
Instead of converting the suffixes back-and-forth, store the .o paths
in modules.order, and replace it with .ko in 'make modules_install'.
This avoids the unneeded sed command.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Similar to other architectures such as arm64, x86, riscv and so on, use
offsets relative to the exception table entry values rather than their
absolute addresses for both the exception location and the fixup.
However, LoongArch label difference because it will actually produce two
relocations, a pair of R_LARCH_ADD32 and R_LARCH_SUB32. Take simple code
below for example:
$ cat test_ex_table.S
.section .text
1:
nop
.section __ex_table,"a"
.balign 4
.long (1b - .)
.previous
$ loongarch64-unknown-linux-gnu-gcc -c test_ex_table.S
$ loongarch64-unknown-linux-gnu-readelf -Wr test_ex_table.o
Relocation section '.rela__ex_table' at offset 0x100 contains 2 entries:
Offset Info Type Symbol's Value Symbol's Name + Addend
0000000000000000 0000000600000032 R_LARCH_ADD32 0000000000000000 .L1^B1 + 0
0000000000000000 0000000500000037 R_LARCH_SUB32 0000000000000000 L0^A + 0
The modpost will complain the R_LARCH_SUB32 relocation, so we need to
patch modpost.c to skip this relocation for .rela__ex_table section.
Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The uuid_le type is used only in MEI ABI, do not advertise it for others.
While at it, comment out that UUID types are not to be used in a new code.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Fix following coccicheck warning:
scripts/mod/sumversion.c:219:48-49: WARNING: Use ARRAY_SIZE
scripts/mod/sumversion.c:156:48-49: WARNING: Use ARRAY_SIZE
Signed-off-by: KaiLong Wang <wangkailong@jari.cn>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Breaking long printed messages in multiple lines makes it very hard to
look up where they originated from.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Since commit 7b4537199a ("kbuild: link symbol CRCs at final link,
removing CONFIG_MODULE_REL_CRCS"), module versioning is broken on
some architectures. Loading a module fails with "disagrees about
version of symbol module_layout".
On such architectures (e.g. ARCH=sparc build with sparc64_defconfig),
modpost shows a warning, like follows:
WARNING: modpost: EXPORT symbol "_mcount" [vmlinux] version generation failed, symbol will not be versioned.
Is "_mcount" prototyped in <asm/asm-prototypes.h>?
Previously, it was a harmless warning (CRC check was just skipped),
but now wrong CRCs are used for comparison because invalid CRCs are
just skipped.
$ sparc64-linux-gnu-nm -n vmlinux
[snip]
0000000000c2cea0 r __ksymtab__kstrtol
0000000000c2ceb8 r __ksymtab__kstrtoul
0000000000c2ced0 r __ksymtab__local_bh_enable
0000000000c2cee8 r __ksymtab__mcount
0000000000c2cf00 r __ksymtab__printk
0000000000c2cf18 r __ksymtab__raw_read_lock
0000000000c2cf30 r __ksymtab__raw_read_lock_bh
[snip]
0000000000c53b34 D __crc__kstrtol
0000000000c53b38 D __crc__kstrtoul
0000000000c53b3c D __crc__local_bh_enable
0000000000c53b40 D __crc__printk
0000000000c53b44 D __crc__raw_read_lock
0000000000c53b48 D __crc__raw_read_lock_bh
Please notice __crc__mcount is missing here.
When the module subsystem looks up a CRC that comes after, it results
in reading out a wrong address. For example, when __crc__printk is
needed, the module subsystem reads 0xc53b44 instead of 0xc53b40.
All CRC entries must be output for correct index accessing. Invalid
CRCs will be unused, but are needed to keep the one-to-one mapping
between __ksymtab_* and __crc_*.
The best is to fix all modpost warnings, but several warnings are still
remaining on less popular architectures.
Fixes: 7b4537199a ("kbuild: link symbol CRCs at final link, removing CONFIG_MODULE_REL_CRCS")
Reported-by: matoro <matoro_mailinglist_kernel@matoro.tk>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: matoro <matoro_mailinglist_kernel@matoro.tk>
- Remove the support for -O3 (CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3)
- Fix error of rpm-pkg cross-builds
- Support riscv for checkstack tool
- Re-enable -Wformwat warnings for Clang
- Clean up modpost, Makefiles, and misc scripts
-----BEGIN PGP SIGNATURE-----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=9kds
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Remove the support for -O3 (CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3)
- Fix error of rpm-pkg cross-builds
- Support riscv for checkstack tool
- Re-enable -Wformwat warnings for Clang
- Clean up modpost, Makefiles, and misc scripts
* tag 'kbuild-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (30 commits)
modpost: remove .symbol_white_list field entirely
modpost: remove unneeded .symbol_white_list initializers
modpost: add PATTERNS() helper macro
modpost: shorten warning messages in report_sec_mismatch()
Revert "Kbuild, lto, workaround: Don't warn for initcall_reference in modpost"
modpost: use more reliable way to get fromsec in section_rel(a)()
modpost: add array range check to sec_name()
modpost: refactor get_secindex()
kbuild: set EXIT trap before creating temporary directory
modpost: remove unused Elf_Sword macro
Makefile.extrawarn: re-enable -Wformat for clang
kbuild: add dtbs_prepare target
kconfig: Qt5: tell the user which packages are required
modpost: use sym_get_data() to get module device_table data
modpost: drop executable ELF support
checkstack: add riscv support for scripts/checkstack.pl
kconfig: shorten the temporary directory name for cc-option
scripts: headers_install.sh: Update config leak ignore entries
kbuild: error out if $(INSTALL_MOD_PATH) contains % or :
kbuild: error out if $(KBUILD_EXTMOD) contains % or :
...
It is not so useful to have symbol whitelists in arrays. With this
over-engineering, the code is difficult to follow.
Let's do it more directly, and collect the relevant code to one place.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The ->symbol_white_list field is referenced in secref_whitelist(),
only when 'fromsec' is data_sections.
/* Check for pattern 2 */
if (match(tosec, init_exit_sections) &&
match(fromsec, data_sections) &&
match(fromsym, mismatch->symbol_white_list))
return 0;
If .fromsec is not data sections, the .symbol_white_list member is
not used by anyone.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This will be useful to define a NULL-terminated array inside a function
call.
Currently, string arrays passed to match() are defined in separate
places:
static const char *const init_sections[] = { ALL_INIT_SECTIONS, NULL };
static const char *const text_sections[] = { ALL_TEXT_SECTIONS, NULL };
static const char *const optim_symbols[] = { "*.constprop.*", NULL };
...
/* Check for pattern 5 */
if (match(fromsec, text_sections) &&
match(tosec, init_sections) &&
match(fromsym, optim_symbols))
return 0;
With the new helper macro, you can list the patterns directly in the
function call, like this:
/* Check for pattern 5 */
if (match(fromsec, PATTERNS(ALL_TEXT_SECTIONS)) &&
match(tosec, PATTERNS(ALL_INIT_SECTIONS)) &&
match(fromsym, PATTERNS("*.contprop.*")))
return 0;
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Each section mismatch results in long warning messages. Too much.
Make each warning fit in one line, and remove a lot of messy code.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This reverts commit 77ab21adae.
Even after 8 years later, GCC LTO has not been upstreamed. Also, it said
"This is a workaround". If this is needed in the future, it should be
added in a proper way.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Jiri Slaby <jirislaby@kernel.org>
The section name of Rel and Rela starts with ".rel" and ".rela"
respectively (but, I do not know whether this is specification or
convention).
For example, ".rela.text" holds relocation entries applied to the
".text" section.
So, the code chops the ".rel" or ".rela" prefix to get the name of
the section to which the relocation applies.
However, I do not like to skip 4 or 5 bytes blindly because it is
potential memory overrun.
The ELF specification provides a more reliable way to do this.
- The sh_info field holds extra information, whose interpretation
depends on the section type
- If the section type is SHT_REL or SHT_RELA, the sh_info field holds
the section header index of the section to which the relocation
applies.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The section index is always positive, so the argument, secindex, should
be unsigned.
Also, inserted the array range check.
If sym->st_shndx is a special section index (between SHN_LORESERVE and
SHN_HIRESERVE), there is no corresponding section header.
For example, if a symbol specifies an absolute value, sym->st_shndx is
SHN_ABS (=0xfff1).
The current users do not cause the out-of-range access of
info->sechddrs[], but it is better to avoid such a pitfall.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
SPECIAL() is only used in get_secindex(). Squash it.
Make the code more readable with more comments.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Commit 9ad21c3f3e ("kbuild: try harder to find symbol names in
modpost") added Elf_Sword (in a wrong way), but did not use it at all.
BTW, the current code looks weird.
The fix for the 32-bit part would be:
Elf64_Sword --> Elf32_Sword
(inconsistet prefix, Elf32_ vs Elf64_)
The fix for the 64-bit part would be:
Elf64_Sxword --> Elf64_Sword
(the size is different between Sword and Sxword)
Note:
Elf32_Sword == Elf64_Sword == int32_t
Elf32_Sxword == Elf64_Sxword == int64_t
Anyway, let's drop unused code instead of fixing it.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
This KUnit update for Linux 5.20-rc1 consists of several fixes and an
important feature to discourage running KUnit tests on production
systems. Running tests on a production system could leave the system
in a bad state. This new feature adds:
- adds a new taint type, TAINT_TEST to signal that a test has been run.
This should discourage people from running these tests on production
systems, and to make it easier to tell if tests have been run
accidentally (by loading the wrong configuration, etc.)
- several documentation and tool enhancements and fixes.
-----BEGIN PGP SIGNATURE-----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=WzBX
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-kunit-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit updates from Shuah Khan:
"This consists of several fixes and an important feature to discourage
running KUnit tests on production systems. Running tests on a
production system could leave the system in a bad state.
Summary:
- Add a new taint type, TAINT_TEST to signal that a test has been
run.
This should discourage people from running these tests on
production systems, and to make it easier to tell if tests have
been run accidentally (by loading the wrong configuration, etc)
- Several documentation and tool enhancements and fixes"
* tag 'linux-kselftest-kunit-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (29 commits)
Documentation: KUnit: Fix example with compilation error
Documentation: kunit: Add CLI args for kunit_tool
kcsan: test: Add a .kunitconfig to run KCSAN tests
kunit: executor: Fix a memory leak on failure in kunit_filter_tests
clk: explicitly disable CONFIG_UML_PCI_OVER_VIRTIO in .kunitconfig
mmc: sdhci-of-aspeed: test: Use kunit_test_suite() macro
nitro_enclaves: test: Use kunit_test_suite() macro
thunderbolt: test: Use kunit_test_suite() macro
kunit: flatten kunit_suite*** to kunit_suite** in .kunit_test_suites
kunit: unify module and builtin suite definitions
selftest: Taint kernel when test module loaded
module: panic: Taint the kernel when selftest modules load
Documentation: kunit: fix example run_kunit func to allow spaces in args
Documentation: kunit: Cleanup run_wrapper, fix x-ref
kunit: test.h: fix a kernel-doc markup
kunit: tool: Enable virtio/PCI by default on UML
kunit: tool: make --kunitconfig repeatable, blindly concat
kunit: add coverage_uml.config to enable GCOV on UML
kunit: tool: refactor internal kconfig handling, allow overriding
kunit: tool: introduce --qemu_args
...
Use sym_get_data() to replace the long code.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Since commit 269a535ca9 ("modpost: generate vmlinux.symvers and
reuse it for the second modpost"), modpost only parses relocatable
files (ET_REL).
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
This reverts commit 4d10c223ba.
Commit 37744feebc ("sh: remove sh5 support") removed the sh64 support
entirely.
Note:
.cranges was only used for sh64 ever.
Commit 211dc24b8744 ("Remove sh5 and sh64 support") in binutils-gdb
already removed the relevant code.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Taint the kernel with TAINT_TEST whenever a test module loads, by adding
a new "TEST" module property, and setting it for all modules in the
tools/testing directory. This property can also be set manually, for
tests which live outside the tools/testing directory with:
MODULE_INFO(test, "Y");
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Aaron Tomlin <atomlin@redhat.com>
Acked-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Since commit f02e8a6596 ("module: Sort exported symbols"),
EXPORT_SYMBOL* is placed in the individual section ___ksymtab(_gpl)+<sym>
(3 leading underscores instead of 2).
Since then, modpost cannot detect the bad combination of EXPORT_SYMBOL
and __init/__exit.
Fix the .fromsec field.
Fixes: f02e8a6596 ("module: Sort exported symbols")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
- Fix build regressions for parisc, csky, nios2, openrisc
- Simplify module builds for CONFIG_LTO_CLANG and CONFIG_X86_KERNEL_IBT
- Remove arch/parisc/nm, which was presumably a workaround for old tools
- Check the odd combination of EXPORT_SYMBOL and 'static' precisely
- Make external module builds robust against "too long argument error"
- Support j, k keys for moving the cursor in nconfig
-----BEGIN PGP SIGNATURE-----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=BaLT
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- Fix build regressions for parisc, csky, nios2, openrisc
- Simplify module builds for CONFIG_LTO_CLANG and CONFIG_X86_KERNEL_IBT
- Remove arch/parisc/nm, which was presumably a workaround for old
tools
- Check the odd combination of EXPORT_SYMBOL and 'static' precisely
- Make external module builds robust against "too long argument error"
- Support j, k keys for moving the cursor in nconfig
* tag 'kbuild-v5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (25 commits)
kbuild: Allow to select bash in a modified environment
scripts: kconfig: nconf: make nconfig accept jk keybindings
modpost: use fnmatch() to simplify match()
modpost: simplify mod->name allocation
kbuild: factor out the common objtool arguments
kbuild: move vmlinux.o link to scripts/Makefile.vmlinux_o
kbuild: clean .tmp_* pattern by make clean
kbuild: remove redundant cleanups in scripts/link-vmlinux.sh
kbuild: rebuild multi-object modules when objtool is updated
kbuild: add cmd_and_savecmd macro
kbuild: make *.mod rule robust against too long argument error
kbuild: make built-in.a rule robust against too long argument error
kbuild: check static EXPORT_SYMBOL* by script instead of modpost
parisc: remove arch/parisc/nm
kbuild: do not create *.prelink.o for Clang LTO or IBT
kbuild: replace $(linked-object) with CONFIG options
kbuild: do not try to parse *.cmd files for objects provided by compiler
kbuild: replace $(if A,A,B) with $(or A,B) in scripts/Makefile.modpost
modpost: squash if...else-if in find_elf_symbol2()
modpost: reuse ARRAY_SIZE() macro for section_mismatch()
...
Replace the own implementation for wildcard (glob) matching with
a function call to fnmatch().
Also, change the return type to 'bool'.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
mod->name is set to the ELF filename with the suffix ".o" stripped.
The current code calls strdup() and free() to manipulate the string,
but a simpler approach is to pass new_module() with the name length
subtracted by 2.
Also, check if the passed filename ends with ".o" before stripping it.
The current code blindly chops the suffix:
tmp[strlen(tmp) - 2] = '\0'
It will cause buffer under-run if strlen(tmp) < 2;
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Here is the large set of char, misc, and other driver subsystem updates
for 5.19-rc1. The merge request for this has been delayed as I wanted
to get lots of linux-next testing due to some late arrivals of changes
for the habannalabs driver.
Highlights of this merge are:
- habanalabs driver updates for new hardware types and fixes and
other updates
- IIO driver tree merge which includes loads of new IIO drivers
and cleanups and additions
- PHY driver tree merge with new drivers and small updates to
existing ones
- interconnect driver tree merge with fixes and updates
- soundwire driver tree merge with some small fixes
- coresight driver tree merge with small fixes and updates
- mhi bus driver tree merge with lots of updates and new device
support
- firmware driver updates
- fpga driver updates
- lkdtm driver updates (with a merge conflict, more on that
below)
- extcon driver tree merge with small updates
- lots of other tiny driver updates and fixes and cleanups, full
details in the shortlog.
All of these have been in linux-next for almost 2 weeks with no reported
problems.
Note, there are 3 merge conflicts when merging this with your tree:
- MAINTAINERS, should be easy to resolve
- drivers/slimbus/qcom-ctrl.c, should be straightforward
resolution
- drivers/misc/lkdtm/stackleak.c, not an easy resolution. This
has been noted in the linux-next tree for a while, and
resolved there, here's a link to the resolution that Stephen
came up with and that Kees says is correct:
https://lore.kernel.org/r/20220509185344.3fe1a354@canb.auug.org.au
I will be glad to provide a merge point that contains these resolutions
if that makes things any easier for you.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYpnkbA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylOrgCggbbAFwESBY9o2YfpG+2VOLpc0GAAoJgY1XN8
P/gumbLEpFvoBZ5xLIW8
=KCgk
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc / other smaller driver subsystem updates from Greg KH:
"Here is the large set of char, misc, and other driver subsystem
updates for 5.19-rc1. The merge request for this has been delayed as I
wanted to get lots of linux-next testing due to some late arrivals of
changes for the habannalabs driver.
Highlights of this merge are:
- habanalabs driver updates for new hardware types and fixes and
other updates
- IIO driver tree merge which includes loads of new IIO drivers and
cleanups and additions
- PHY driver tree merge with new drivers and small updates to
existing ones
- interconnect driver tree merge with fixes and updates
- soundwire driver tree merge with some small fixes
- coresight driver tree merge with small fixes and updates
- mhi bus driver tree merge with lots of updates and new device
support
- firmware driver updates
- fpga driver updates
- lkdtm driver updates (with a merge conflict, more on that below)
- extcon driver tree merge with small updates
- lots of other tiny driver updates and fixes and cleanups, full
details in the shortlog.
All of these have been in linux-next for almost 2 weeks with no
reported problems"
* tag 'char-misc-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (387 commits)
habanalabs: use separate structure info for each error collect data
habanalabs: fix missing handle shift during mmap
habanalabs: remove hdev from hl_ctx_get args
habanalabs: do MMU prefetch as deferred work
habanalabs: order memory manager messages
habanalabs: return -EFAULT on copy_to_user error
habanalabs: use NULL for eventfd
habanalabs: update firmware header
habanalabs: add support for notification via eventfd
habanalabs: add topic to memory manager buffer
habanalabs: handle race in driver fini
habanalabs: add device memory scrub ability through debugfs
habanalabs: use unified memory manager for CB flow
habanalabs: unified memory manager new code for CB flow
habanalabs/gaudi: set arbitration timeout to a high value
habanalabs: add put by handle method to memory manager
habanalabs: hide memory manager page shift
habanalabs: Add separate poll interval value for protocol
habanalabs: use get_task_pid() to take PID
habanalabs: add prefetch flag to the MAP operation
...
The 'static' specifier and EXPORT_SYMBOL() are an odd combination.
Commit 15bfc2348d ("modpost: check for static EXPORT_SYMBOL*
functions") tried to detect it, but this check has false negatives.
Here is the sample code.
Makefile:
obj-y += foo1.o foo2.o
foo1.c:
#include <linux/export.h>
static void foo(void) {}
EXPORT_SYMBOL(foo);
foo2.c:
void foo(void) {}
foo1.c exports the static symbol 'foo', but modpost cannot catch it
because it is fooled by foo2.c, which has a global symbol with the
same name.
s->is_static is cleared if a global symbol with the same name is found
somewhere, but EXPORT_SYMBOL() and the global symbol do not necessarily
belong to the same compilation unit.
This check should be done per compilation unit, but I do not know how
to do it in modpost. modpost runs against vmlinux.o or modules, which
merges multiple objects, then forgets their origin.
modpost cannot parse individual objects because they may not be ELF but
LLVM IR when CONFIG_LTO_CLANG=y.
Add a simple bash script to parse the output from ${NM}. This works for
CONFIG_LTO_CLANG=y because llvm-nm can dump symbols of LLVM IR files.
Revert 15bfc2348d.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM-14 (x86-64)
When CONFIG_LTO_CLANG=y, additional intermediate *.prelink.o is created
for each module. Also, objtool is postponed until LLVM IR is converted
to ELF.
CONFIG_X86_KERNEL_IBT works in a similar way to postpone objtool until
objects are merged together.
This commit stops generating *.prelink.o, so the build flow will look
similar with/without LTO.
The following figures show how the LTO build currently works, and
how this commit is changing it.
Current build flow
==================
[1] single-object module
$(LD)
$(CC) +objtool $(LD)
foo.c --------------------> foo.o -----> foo.prelink.o -----> foo.ko
(LLVM IR) (ELF) | (ELF)
|
foo.mod.o --/
(LLVM IR)
[2] multi-object module
$(LD)
$(CC) $(AR) +objtool $(LD)
foo1.c -----> foo1.o -----> foo.o -----> foo.prelink.o -----> foo.ko
| (archive) (ELF) | (ELF)
foo2.c -----> foo2.o --/ |
(LLVM IR) foo.mod.o --/
(LLVM IR)
One confusion is that foo.o in multi-object module is an archive
despite of its suffix.
New build flow
==============
[1] single-object module
Since there is only one object, there is no need to keep the LLVM IR.
Use $(CC)+$(LD) to generate an ELF object in one build rule. When LTO
is disabled, $(LD) is unneeded because $(CC) produces an ELF object.
$(CC)+$(LD)+objtool $(LD)
foo.c ----------------------------> foo.o ---------> foo.ko
(ELF) | (ELF)
|
foo.mod.o --/
(LLVM IR)
[2] multi-object module
Previously, $(AR) was used to combine LLVM IR files into an archive,
but there was no technical reason to do so. Use $(LD) to merge them
into a single ELF object.
$(LD)
$(CC) +objtool $(LD)
foo1.c ---------> foo1.o ---------> foo.o ---------> foo.ko
| (ELF) | (ELF)
foo2.c ---------> foo2.o ----/ |
(LLVM IR) foo.mod.o --/
(LLVM IR)
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM-14 (x86-64)
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
if ((addr - sym->st_value) < distance) {
distance = addr - sym->st_value;
near = sym;
} else if ((addr - sym->st_value) == distance) {
near = sym;
}
is equivalent to:
if (addr - sym->st_value <= distance) {
distance = addr - sym->st_value;
near = sym;
}
(The else-if block can overwrite 'distance' with the same value).
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Move ARRAY_SIZE() from file2alias.c to modpost.h to reuse it in
section_mismatch().
Also, move the variable 'check' inside the for-loop.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
check_sec_ref() does not use the first parameter 'mod'.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
The return value of is_arm_mapping_symbol() is unpredictable when "$"
is passed in.
strchr(3) says:
The strchr() and strrchr() functions return a pointer to the matched
character or NULL if the character is not found. The terminating null
byte is considered part of the string, so that if c is specified as
'\0', these functions return a pointer to the terminator.
When str[1] is '\0', strchr("axtd", str[1]) is not NULL, and str[2] is
referenced (i.e. buffer overrun).
Test code
---------
char str1[] = "abc";
char str2[] = "ab";
strcpy(str1, "$");
strcpy(str2, "$");
printf("test1: %d\n", is_arm_mapping_symbol(str1));
printf("test2: %d\n", is_arm_mapping_symbol(str2));
Result
------
test1: 0
test2: 1
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
With the `-z unique-symbol` linker flag or any similar mechanism,
it is possible to trigger the following:
ERROR: modpost: "param_set_uint.0" [vmlinux] is a static EXPORT_SYMBOL
The reason is that for now the condition from remove_dot():
if (m && (s[n + m] == '.' || s[n + m] == 0))
which was designed to test if it's a dot or a '\0' after the suffix
is never satisfied.
This is due to that `s[n + m]` always points to the last digit of a
numeric suffix, not on the symbol next to it (from a custom debug
print added to modpost):
param_set_uint.0, s[n + m] is '0', s[n + m + 1] is '\0'
So it's off-by-one and was like that since 2014.
Fix this for the sake of any potential upcoming features, but don't
bother stable-backporting, as it's well hidden -- apart from that
LD flag, it can be triggered only with GCC LTO which never landed
upstream.
Fixes: fcd38ed0ff ("scripts: modpost: fix compilation warning")
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
include/{linux,asm-generic}/export.h defines a weak symbol, __crc_*
as a placeholder.
Genksyms writes the version CRCs into the linker script, which will be
used for filling the __crc_* symbols. The linker script format depends
on CONFIG_MODULE_REL_CRCS. If it is enabled, __crc_* holds the offset
to the reference of CRC.
It is time to get rid of this complexity.
Now that modpost parses text files (.*.cmd) to collect all the CRCs,
it can generate C code that will be linked to the vmlinux or modules.
Generate a new C file, .vmlinux.export.c, which contains the CRCs of
symbols exported by vmlinux. It is compiled and linked to vmlinux in
scripts/link-vmlinux.sh.
Put the CRCs of symbols exported by modules into the existing *.mod.c
files. No additional build step is needed for modules. As before,
*.mod.c are compiled and linked to *.ko in scripts/Makefile.modfinal.
No linker magic is used here. The new C implementation works in the
same way, whether CONFIG_RELOCATABLE is enabled or not.
CONFIG_MODULE_REL_CRCS is no longer needed.
Previously, Kbuild invoked additional $(LD) to update the CRCs in
objects, but this step is unneeded too.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nicolas Schier <nicolas@fjasle.eu>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM-14 (x86-64)
Currently, CONFIG_MODVERSIONS needs extra link to embed the symbol
versions into ELF objects. Then, modpost extracts the version CRCs
from them.
The following figures show how it currently works, and how I am trying
to change it.
Current implementation
======================
|----------|
embed CRC -------------------------->| final |
$(CC) $(LD) / |---------| | link for |
-----> *.o -------> *.o -->| modpost | | vmlinux |
/ / | |-- *.mod.c -->| or |
/ genksyms / |---------| | module |
*.c ------> *.symversions |----------|
Genksyms outputs the calculated CRCs in the form of linker script
(*.symversions), which is used by $(LD) to update the object.
If CONFIG_LTO_CLANG=y, the build process is much more complex. Embedding
the CRCs is postponed until the LLVM bitcode is converted into ELF,
creating another intermediate *.prelink.o.
However, this complexity is unneeded. There is no reason why we must
embed version CRCs in objects so early.
There is final link stage for vmlinux (scripts/link-vmlinux.sh) and
modules (scripts/Makefile.modfinal). We can link CRCs at the very last
moment.
New implementation
==================
|----------|
--------------------------------------->| final |
$(CC) / |---------| | link for |
-----> *.o ---->| | | vmlinux |
/ | modpost |--- .vmlinux.export.c -->| or |
/ genksyms | |--- *.mod.c ------------>| module |
*.c ------> *.cmd -->|---------| |----------|
Pass the symbol versions to modpost as separate text data, which are
available in *.cmd files.
This commit changes modpost to extract CRCs from *.cmd files instead of
from ELF objects.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM-14 (x86-64)
find_symbol() returns the first symbol found in the hash table. This
table is global, so it may return a symbol from an unexpected module.
There is a case where we want to search for a symbol with a given name
in a specified module.
Add sym_find_with_module(), which receives the module pointer as the
second argument. It is equivalent to find_module() if NULL is passed
as the module pointer.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM-14 (x86-64)
There were more EXPORT_SYMBOL types in the past. The following commits
removed unused ones.
- f1c3d73e97 ("module: remove EXPORT_SYMBOL_GPL_FUTURE")
- 367948220f ("module: remove EXPORT_UNUSED_SYMBOL*")
There are 3 remaining in enum export, but export_unknown does not make
any sense because we never expect such a situation like "we do not know
how it was exported".
If the symbol name starts with "__ksymtab_", but the section name
does not start with "___ksymtab+" or "___ksymtab_gpl+", it is not an
exported symbol.
It occurs when a variable starting with "__ksymtab_" is directly defined:
int __ksymtab_foo;
Presumably, there is no practical issue for using such a weird variable
name (but there is no good reason for doing so, either).
Anyway, that is not an exported symbol. Setting export_unknown is not
the right thing to do. Do not call sym_add_exported() in this case.
With pointless export_unknown removed, the export type finally becomes
boolean (either EXPORT_SYMBOL or EXPORT_SYMBOL_GPL).
I renamed the field name to is_gpl_only. EXPORT_SYMBOL_GPL sets it true.
Only GPL-compatible modules can use it.
I removed the orphan comment, "How a symbol is exported", which is
unrelated to sec_mismatch_count. It is about enum export.
See commit bd5cbcedf4 ("kbuild: export-type enhancement to modpost.c")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Tested-by: Nathan Chancellor <nathan@kernel.org>
This is a remnant of commit 6543becf26 ("mod/file2alias: make
modalias generation safe for cross compiling").
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
A later commit will add more code to this list_for_each_entry loop.
Before that, move the loop body into a separate helper function.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Tested-by: Nathan Chancellor <nathan@kernel.org>
add_intree_flag(), add_retpoline(), and add_staging_flag() are small
enough to be merged into add_header().
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Tested-by: Nathan Chancellor <nathan@kernel.org>
new_symbol() does two things; allocate a new symbol and register it
to the hash table.
Using a separate function for each is easier to understand.
Replace new_symbol() with hash_add_symbol(). Remove the second parameter
of alloc_symbol().
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Currently, sym_add_exported() does not allocate a symbol if the same
name symbol already exists in the hash table.
This does not reflect the real use cases. You can let an external
module override the in-tree one. In this case, the external module
will export the same name symbols as the in-tree one. However,
modpost simply ignores those symbols, then Module.symvers for the
external module loses its symbols.
sym_add_exported() should allocate a new symbol.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
This is currently a warning, but I think modpost should stop building
in this case.
If the same symbol is exported multiple times and we let it keep going,
the sanity check becomes difficult.
Only the legitimate case is that an external module overrides the
corresponding in-tree module to provide a different implementation
with the same interface.
Also, there exists an upstream example that exploits this feature.
$ make M=tools/testing/nvdimm
... builds tools/testing/nvdimm/libnvdimm.ko. This is a mocked module
that overrides the symbols from drivers/nvdimm/libnvdimm.ko.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
modpost dumps the exported symbols into Module.symvers, but currently
in random order because it iterates in the hash table.
Add a linked list of exported symbols in struct module, so we can
iterate on symbols per module.
This commit makes Module.symvers much more readable; the outer loop in
write_dump() iterates over the modules in the order of modules.order,
and the inner loop dumps symbols in each module.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Use the doubly linked list to traverse the list in the added order.
This makes the code more consistent.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
This looks easier to understand (just because this is a pattern in
the kernel code). No functional change is intended.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Currently, modpost manages unresolved in a singly linked list; it adds
a new node to the head, and traverses the list from new to old.
Use a doubly linked list to keep the order in the symbol table in the
ELF file.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Add a small helper, sym_add_unresolved() to ease the further
refactoring.
Remove the 'weak' argument from alloc_symbol() because it is sensible
only for unresolved symbols.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Currently, modpost manages modules in a singly linked list; it adds
a new node to the head, and traverses the list from new to old.
It works, but the error messages are shown in the reverse order.
If you have a Makefile like this:
obj-m += foo.o bar.o
then, modpost shows error messages in bar.o, foo.o, in this order.
Use a doubly linked list to keep the order in modules.order; use
list_add_tail() for the node addition and list_for_each_entry() for
the list traverse.
Now that the kernel's list macros have been imported to modpost, I will
use them actively going forward.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Import include/linux/list.h to use convenient list macros in modpost.
I dropped kernel-space code such as {WRITE,READ}_ONCE etc. and unneeded
macros.
I also imported container_of() from include/linux/container_of.h and
type definitions from include/linux/types.h.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Currently, mod->gpl_compatible is tristate; it is set to -1 by default,
then to 1 or 0 when MODULE_LICENSE() is found.
Maybe, -1 was chosen to represent the 'unknown' license, but it is not
useful.
The current code:
if (!mod->gpl_compatible)
check_for_gpl_usage(exp->export, basename, exp->name);
... only cares whether gpl_compatible is zero or not.
Change it to a bool type with the initial value 'true', which has no
functional change.
The default value should be 'true' instead of 'false'.
Since commit 1d6cd39293 ("modpost: turn missing MODULE_LICENSE() into
error"), unknown module license is an error.
The error message, "missing MODULE_LICENSE()" is enough to explain the
issue. It is not sensible to show another message, "GPL-incompatible
module ... uses GPL-only symbol".
Add comments to explain this.
While I was here, I renamed gpl_compatible to is_gpl_compatible for
clarification, and also slightly refactored the code.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Use 'bool' to clarify that the valid value is true or false.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
There is no good reason to define struct namespace_list in modpost.h
struct module has pointers to struct namespace_list, but that does
not require the definition of struct namespace_list.
Move it to modpost.c.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Do not repeat the similar code.
It is simpler to do this in check_exports() instead of add_versions().
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
It took me a while to understand the intent of "exp->module == mod".
This code goes back to 2003. [1]
The commit is not in this git repository, and might be worth a little
explanation.
You can add EXPORT_SYMBOL() without having its definition in the same
file (but you need to put a declaration).
This is typical when EXPORT_SYMBOL() is added in a C file, but the
actual implementation is in a separate assembly file.
One example is arch/arm/kernel/armksyms.c
In the old days, EXPORT_SYMBOL() was only available in C files (but
this limitation does not exist any more). If you forget to add the
definition, this error occurs.
Add a separate, clearer message for this case. It should be an error
even if KBUILD_MODPOST_WARN is given.
[1]: https://git.kernel.org/pub/scm/linux/kernel/git/history/history.git/commit/?id=2763b6bcb96e6a38a2fe31108fe5759ec5bcc80a
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
The description,
it may have already been added without a
CRC, in this case just update the CRC
... is no longer valid.
In the old days, this function was used to update the CRC as well.
Commit 040fcc819a ("kbuild: improved modversioning support for
external modules") started to use a separate function (sym_update_crc)
for updating the CRC.
The first part, "Add an exported symbol" is correct, but it is too
obvious from the function name. Drop this comment entirely.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
If an error occurs, modpost will fail anyway. Do not write out
any content (, which might be invalid).
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Use snprintf() to avoid the potential buffer overflow, and also
check the return value to detect the too long path.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
It is allowed to add the same objects multiple times to obj-y / obj-m:
obj-y += foo.o foo.o foo.o
obj-m += bar.o bar.o bar.o
It is also allowed to add the same objects multiple times to a composite
module:
obj-m += foo.o
foo-y := foo1.o foo2.o foo2.o foo1.o
This flexibility is useful because the same object might be selected by
different CONFIG options, like this:
obj-m += foo.o
foo-y := foo1.o
foo-$(CONFIG_FOO_X) += foo2.o
foo-$(CONFIG_FOO_Y) += foo2.o
The duplicated objects are omitted at link time. It works naturally in
Makefiles because GNU Make removes duplication in $^ without changing
the order.
It is working well, almost...
A small flaw I notice is, *.mod contains duplication in such a case.
This is probably not a big deal. As far as I know, the only small
problem is scripts/mod/sumversion.c parses the same file multiple
times.
I am fixing this because I plan to reuse *.mod for other purposes,
where the duplication can be problematic.
The code change is quite simple. We already use awk to drop duplicated
lines in modules.order (see cmd_modules_order in the same file).
I copied the code, but changed RS to use spaces as record separators.
I also changed the file format to list one object per line.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The *.mod files have two lines; the first line lists the member objects
of the module, and the second line, if CONFIG_TRIM_UNUSED_KSYMS=y, lists
the undefined symbols.
Currently, we generate *.mod after constructing composite modules,
otherwise, we cannot compute the second line. No prerequisite is
required to print the first line.
They are orthogonal. Splitting them into separate commands will ease
further cleanups.
This commit splits the list of undefined symbols out to *.usyms files.
Previously, the list of undefined symbols ended up with a very long
line, but now it has one symbol per line.
Use sed like we did before commit 7d32358be8 ("kbuild: avoid split
lines in .mod files").
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
There are two call sites for sym_update_namespace().
When the symbol has no namespace, s->namespace is set to NULL,
but the conversion from "" to NULL is done in two different places.
[1] read_symbols()
This gets the namespace from __kstrtabns_<symbol>. If the symbol has
no namespace, sym_get_data(info, sym) returns the empty string "".
namespace_from_kstrtabns() converts it to NULL before it is passed to
sym_update_namespace().
[2] read_dump()
This gets the namespace from the dump file, *.symvers. If the symbol
has no namespace, the 'namespace' is the empty string "", which is
directly passed into sym_update_namespace(). The conversion from
"" to NULL is done in sym_update_namespace().
namespace_from_kstrtabns() exists only for creating this inconsistency.
Remove namespace_from_kstrtabns() so that sym_update_namespace() is
consistently passed with "" instead of NULL.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
These are initialized with zeros without explicit initializers.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
The assigned 'export' is only used when
if (strstarts(symname, "__ksymtab_"))
is met. The else-part of the assignment is the dead code.
Move the export_from_secname() call to where it is used.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
With commit 1743694eb2 ("modpost: stop symbol preloading for
modversion CRC") applied, now export_from_sec() is useless.
handle_symbol() is called for every symbol in the ELF.
When 'symname' does not start with "__ksymtab", export_from_sec() is
called, and the returned value is stored in 'export'.
It is used in the last part of handle_symbol():
if (strstarts(symname, "__ksymtab_")) {
name = symname + strlen("__ksymtab_");
sym_add_exported(name, mod, export);
}
'export' is used only when 'symname' starts with "__ksymtab_".
So, the value returned by export_from_sec() is never used.
Remove useless export_from_sec(). This makes further cleanups possible.
I put the temporary code:
export = export_unknown;
Otherwise, I would get the compiler warning:
warning: 'export' may be used uninitialized in this function [-Wmaybe-uninitialized]
This is apparently false positive because
if (strstarts(symname, "__ksymtab_")
... is a stronger condition than:
if (strstarts(symname, "__ksymtab")
Anyway, this part will be cleaned up by the next commit.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Add uevent support to MHI endpoint bus so that the client drivers can be
autoloaded by udev when the MHI endpoint devices gets created. The client
drivers are expected to provide MODULE_DEVICE_TABLE with the MHI id_table
struct so that the alias can be exported.
The MHI endpoint reused the mhi_device_id structure of the MHI bus.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220405135754.6622-19-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This log message was accidentally chopped off.
I was wondering why this happened, but checking the ML log, Mark
precisely followed my suggestion [1].
I just used "..." because I was too lazy to type the sentence fully.
Sorry for the confusion.
[1]: https://lore.kernel.org/all/CAK7LNAR6bXXk9-ZzZYpTqzFqdYbQsZHmiWspu27rtsFxvfRuVA@mail.gmail.com/
Fixes: 4a6795933a ("kbuild: modpost: Explicitly warn about unprototyped symbols")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
coarse grained, hardware based, forward edge Control-Flow-Integrity mechanism
where any indirect CALL/JMP must target an ENDBR instruction or suffer #CP.
Additionally, since Alderlake (12th gen)/Sapphire-Rapids, speculation is
limited to 2 instructions (and typically fewer) on branch targets not starting
with ENDBR. CET-IBT also limits speculation of the next sequential instruction
after the indirect CALL/JMP [1].
CET-IBT is fundamentally incompatible with retpolines, but provides, as
described above, speculation limits itself.
[1] https://www.intel.com/content/www/us/en/developer/articles/technical/software-security-guidance/technical-documentation/branch-history-injection.html
-----BEGIN PGP SIGNATURE-----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=jZfK
-----END PGP SIGNATURE-----
Merge tag 'x86_core_for_5.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 CET-IBT (Control-Flow-Integrity) support from Peter Zijlstra:
"Add support for Intel CET-IBT, available since Tigerlake (11th gen),
which is a coarse grained, hardware based, forward edge
Control-Flow-Integrity mechanism where any indirect CALL/JMP must
target an ENDBR instruction or suffer #CP.
Additionally, since Alderlake (12th gen)/Sapphire-Rapids, speculation
is limited to 2 instructions (and typically fewer) on branch targets
not starting with ENDBR. CET-IBT also limits speculation of the next
sequential instruction after the indirect CALL/JMP [1].
CET-IBT is fundamentally incompatible with retpolines, but provides,
as described above, speculation limits itself"
[1] https://www.intel.com/content/www/us/en/developer/articles/technical/software-security-guidance/technical-documentation/branch-history-injection.html
* tag 'x86_core_for_5.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits)
kvm/emulate: Fix SETcc emulation for ENDBR
x86/Kconfig: Only allow CONFIG_X86_KERNEL_IBT with ld.lld >= 14.0.0
x86/Kconfig: Only enable CONFIG_CC_HAS_IBT for clang >= 14.0.0
kbuild: Fixup the IBT kbuild changes
x86/Kconfig: Do not allow CONFIG_X86_X32_ABI=y with llvm-objcopy
x86: Remove toolchain check for X32 ABI capability
x86/alternative: Use .ibt_endbr_seal to seal indirect calls
objtool: Find unused ENDBR instructions
objtool: Validate IBT assumptions
objtool: Add IBT/ENDBR decoding
objtool: Read the NOENDBR annotation
x86: Annotate idtentry_df()
x86,objtool: Move the ASM_REACHABLE annotation to objtool.h
x86: Annotate call_on_stack()
objtool: Rework ASM_REACHABLE
x86: Mark __invalid_creds() __noreturn
exit: Mark do_group_exit() __noreturn
x86: Mark stop_this_cpu() __noreturn
objtool: Ignore extra-symbol code
objtool: Rename --duplicate to --lto
...
Linus pointed out the benefits of C99 some years ago, especially variable
declarations in loops [1]. At that time, we were not ready for the
migration due to old compilers.
Recently, Jakob Koschel reported a bug in list_for_each_entry(), which
leaks the invalid pointer out of the loop [2]. In the discussion, we
agreed that the time had come. Now that GCC 5.1 is the minimum compiler
version, there is nothing to prevent us from going to -std=gnu99, or even
straight to -std=gnu11.
Discussions for a better list iterator implementation are ongoing, but
this patch set must land first.
[1] https://lore.kernel.org/all/CAHk-=wgr12JkKmRd21qh-se-_Gs69kbPgR9x4C+Es-yJV2GLkA@mail.gmail.com/
[2] https://lore.kernel.org/lkml/86C4CE7D-6D93-456B-AA82-F8ADEACA40B7@gmail.com/
-----BEGIN PGP SIGNATURE-----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=KMDk
-----END PGP SIGNATURE-----
Merge tag 'kbuild-gnu11-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild update for C11 language base from Masahiro Yamada:
"Kbuild -std=gnu11 updates for v5.18
Linus pointed out the benefits of C99 some years ago, especially
variable declarations in loops [1]. At that time, we were not ready
for the migration due to old compilers.
Recently, Jakob Koschel reported a bug in list_for_each_entry(), which
leaks the invalid pointer out of the loop [2]. In the discussion, we
agreed that the time had come. Now that GCC 5.1 is the minimum
compiler version, there is nothing to prevent us from going to
-std=gnu99, or even straight to -std=gnu11.
Discussions for a better list iterator implementation are ongoing, but
this patch set must land first"
[1] https://lore.kernel.org/all/CAHk-=wgr12JkKmRd21qh-se-_Gs69kbPgR9x4C+Es-yJV2GLkA@mail.gmail.com/
[2] https://lore.kernel.org/lkml/86C4CE7D-6D93-456B-AA82-F8ADEACA40B7@gmail.com/
* tag 'kbuild-gnu11-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
Kbuild: use -std=gnu11 for KBUILD_USERCFLAGS
Kbuild: move to -std=gnu11
Kbuild: use -Wdeclaration-after-statement
Kbuild: add -Wno-shift-negative-value where -Wextra is used
The kernel is moving from using `-std=gnu89` to `-std=gnu11`, permitting
the use of additional C11 features such as for-loop initial declarations.
One contentious aspect of C99 is that it permits mixed declarations and
code, and for now at least, it seems preferable to enforce that
declarations must come first.
These warnings were already enabled in the kernel itself, but not
for KBUILD_USERCFLAGS or the compat VDSO on arch/arm64, which uses
a separate set of CFLAGS.
This patch fixes an existing violation in modpost.c, which is not
reported because of the missing flag in KBUILD_USERCFLAGS:
| scripts/mod/modpost.c: In function ‘match’:
| scripts/mod/modpost.c:837:3: warning: ISO C90 forbids mixed declarations and code [-Wdeclaration-after-statement]
| 837 | const char *endp = p + strlen(p) - 1;
| | ^~~~~
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
[arnd: don't add a duplicate flag to the default set, update changelog]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM/Clang v13.0.0 (x86-64)
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Currently with -mindirect-branch=thunk and -mfunction-return=thunk compiler
options expoline thunks are put into individual COMDAT group sections. s390
is the only architecture which has group sections and it has implications
for kpatch and objtool tools support.
Using -mindirect-branch=thunk-extern and -mfunction-return=thunk-extern
is an alternative, which comes with a need to generate all required
expoline thunks manually. Unfortunately modules area is too far away from
the kernel image, and expolines from the kernel image cannon be used.
But since all new distributions (except Debian) build kernels for machine
generations newer than z10, where "exrl" instruction is available, that
leaves only 16 expolines thunks possible.
Provide an option to build the kernel with
-mindirect-branch=thunk-extern and -mfunction-return=thunk-extern for
z10 or newer. This also requires to postlink expoline thunks into all
modules explicitly. Currently modules already contain most expolines
anyhow.
Unfortunately -mindirect-branch=thunk-extern and
-mfunction-return=thunk-extern options support is broken in gcc <= 11.2.
Additional compile test is required to verify proper gcc support.
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Co-developed-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
* Support for the DA9063 as used on the HiFive Unmatched.
* Support for relative extables, which puts us in line with other
architectures and save some space in vmlinux.
* A handful of kexec fixes/improvements, including the ability to run
crash kernels from PCI-addressable memory on the HiFive Unmatched.
* Support for the SBI SRST extension, which allows systems that do not
have an explicit driver in Linux to reboot.
* A handful of fixes and cleanups, including to the defconfigs and
device trees.
---
This time I do expect to have a part 2, as there's still some smaller
patches on the list. I was hoping to get through more of that over the
weekend, but I got distracted with the ABI issues. Figured it's better
to send this sooner rather than waiting.
Included are my merge resolutions against a master from this morning, if
that helps any:
diff --cc arch/riscv/include/asm/sbi.h
index 289621da4a2a,9c46dd3ff4a2..000000000000
--- a/arch/riscv/include/asm/sbi.h
+++ b/arch/riscv/include/asm/sbi.h
@@@ -27,7 -27,14 +27,15 @@@ enum sbi_ext_id
SBI_EXT_IPI = 0x735049,
SBI_EXT_RFENCE = 0x52464E43,
SBI_EXT_HSM = 0x48534D,
+ SBI_EXT_SRST = 0x53525354,
+
+ /* Experimentals extensions must lie within this range */
+ SBI_EXT_EXPERIMENTAL_START = 0x08000000,
+ SBI_EXT_EXPERIMENTAL_END = 0x08FFFFFF,
+
+ /* Vendor extensions must lie within this range */
+ SBI_EXT_VENDOR_START = 0x09000000,
+ SBI_EXT_VENDOR_END = 0x09FFFFFF,
};
enum sbi_ext_base_fid {
diff --git a/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts b/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts
index e03a4c94cf3f..6bfa1f24d3de 100644
--- a/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts
+++ b/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts
@@ -188,14 +188,6 @@ vdd_ldo11: ldo11 {
regulator-always-on;
};
};
-
- rtc {
- compatible = "dlg,da9063-rtc";
- };
-
- wdt {
- compatible = "dlg,da9063-watchdog";
- };
};
};
-----BEGIN PGP SIGNATURE-----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=uqtf
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.17-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for the DA9063 as used on the HiFive Unmatched.
- Support for relative extables, which puts us in line with other
architectures and save some space in vmlinux.
- A handful of kexec fixes/improvements, including the ability to run
crash kernels from PCI-addressable memory on the HiFive Unmatched.
- Support for the SBI SRST extension, which allows systems that do not
have an explicit driver in Linux to reboot.
- A handful of fixes and cleanups, including to the defconfigs and
device trees.
* tag 'riscv-for-linus-5.17-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (52 commits)
RISC-V: Use SBI SRST extension when available
riscv: mm: fix wrong phys_ram_base value for RV64
RISC-V: Use common riscv_cpuid_to_hartid_mask() for both SMP=y and SMP=n
riscv: head: remove useless __PAGE_ALIGNED_BSS and .balign
riscv: errata: alternative: mark vendor_patch_func __initdata
riscv: head: make secondary_start_common() static
riscv: remove cpu_stop()
riscv: try to allocate crashkern region from 32bit addressible memory
riscv: use hart id instead of cpu id on machine_kexec
riscv: Don't use va_pa_offset on kdump
riscv: dts: sifive: fu540-c000: Fix PLIC node
riscv: dts: sifive: fu540-c000: Drop bogus soc node compatible values
riscv: dts: sifive: Group tuples in register properties
riscv: dts: sifive: Group tuples in interrupt properties
riscv: dts: microchip: mpfs: Group tuples in interrupt properties
riscv: dts: microchip: mpfs: Fix clock controller node
riscv: dts: microchip: mpfs: Fix reference clock node
riscv: dts: microchip: mpfs: Fix PLIC node
riscv: dts: microchip: mpfs: Drop empty chosen node
riscv: dts: canaan: Group tuples in interrupt properties
...
Similar as other architectures such as arm64, x86 and so on, use
offsets relative to the exception table entry values rather than
absolute addresses for both the exception locationand the fixup.
However, RISCV label difference will actually produce two relocations,
a pair of R_RISCV_ADD32 and R_RISCV_SUB32. Take below simple code for
example:
$ cat test.S
.section .text
1:
nop
.section __ex_table,"a"
.balign 4
.long (1b - .)
.previous
$ riscv64-linux-gnu-gcc -c test.S
$ riscv64-linux-gnu-readelf -r test.o
Relocation section '.rela__ex_table' at offset 0x100 contains 2 entries:
Offset Info Type Sym. Value Sym. Name + Addend
000000000000 000600000023 R_RISCV_ADD32 0000000000000000 .L1^B1 + 0
000000000000 000500000027 R_RISCV_SUB32 0000000000000000 .L0 + 0
The modpost will complain the R_RISCV_SUB32 relocation, so we need to
patch modpost.c to skip this relocation for .rela__ex_table section.
After this patch, the __ex_table section size of defconfig vmlinux is
reduced from 7072 Bytes to 3536 Bytes.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This allows to selectively autoload drivers for ISH devices.
Currently all ISH drivers are loaded for all systems having any ISH
device.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
- Add -s option (strict mode) to merge_config.sh to make it fail when
any symbol is redefined.
- Show a warning if a different compiler is used for building external
modules.
- Infer --target from ARCH for CC=clang to let you cross-compile the
kernel without CROSS_COMPILE.
- Make the integrated assembler default (LLVM_IAS=1) for CC=clang.
- Add <linux/stdarg.h> to the kernel source instead of borrowing
<stdarg.h> from the compiler.
- Add Nick Desaulniers as a Kbuild reviewer.
- Drop stale cc-option tests.
- Fix the combination of CONFIG_TRIM_UNUSED_KSYMS and CONFIG_LTO_CLANG
to handle symbols in inline assembly.
- Show a warning if 'FORCE' is missing for if_changed rules.
- Various cleanups
-----BEGIN PGP SIGNATURE-----
iQJJBAABCgAzFiEEbmPs18K1szRHjPqEPYsBB53g2wYFAmExXHoVHG1hc2FoaXJv
eUBrZXJuZWwub3JnAAoJED2LAQed4NsGAZwP/iHdEZzuQ4cz2uXUaV0fevj9jjPU
zJ8wrrNabAiT6f5x861DsARQSR4OSt3zN0tyBNgZwUdotbe7ED5GegrgIUBMWlML
QskhTEIZj7TexAX/20vx671gtzI3JzFg4c9BuriXCFRBvychSevdJPr65gMDOesL
vOJnXe+SGXG2+fPWi/PxrcOItNRcveqo2GiWHT3g0Cv/DJUulu81gEkz3hrufnMR
cjMeSkV0nJJcvI755OQBOUnEuigW64k4m2WxHPG24tU8cQOCqV6lqwOfNQBAn4+F
OoaCMyPQT9gvGYwGExQMCXGg0wbUt1qnxzOVoA2qFCwbo+MFhqjBvPXab6VJm7CE
mY3RrTtvxSqBdHI6EGcYeLjhycK9b+LLoJ1qc3S9FK8It6NoFFp4XV0R6ItPBls7
mWi9VSpyI6k0AwLq+bGXEHvaX/bnnf/vfqn8H+w6mRZdXjFV8EB2DiOSRX/OqjVG
RnvTtXzWWThLyXvWR3Jox4+7X6728oL7akLemoeZI6oTbJDm7dQgwpz5HbSyHXLh
d+gUF3Y/6lqxT5N9GSVDxpD1bEMh2I7nGQ4M7WGbGas/3yUemF8wbBqGQo4a+YeD
d9vGAUxDp2PQTtL2sjFo5Gd4PZEM9g7vwWzRvHe0o5NxKEXcBg25b8cD1hxrN9Y4
Y1AAnc0kLO+My3PC
=lw3M
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Add -s option (strict mode) to merge_config.sh to make it fail when
any symbol is redefined.
- Show a warning if a different compiler is used for building external
modules.
- Infer --target from ARCH for CC=clang to let you cross-compile the
kernel without CROSS_COMPILE.
- Make the integrated assembler default (LLVM_IAS=1) for CC=clang.
- Add <linux/stdarg.h> to the kernel source instead of borrowing
<stdarg.h> from the compiler.
- Add Nick Desaulniers as a Kbuild reviewer.
- Drop stale cc-option tests.
- Fix the combination of CONFIG_TRIM_UNUSED_KSYMS and CONFIG_LTO_CLANG
to handle symbols in inline assembly.
- Show a warning if 'FORCE' is missing for if_changed rules.
- Various cleanups
* tag 'kbuild-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (39 commits)
kbuild: redo fake deps at include/ksym/*.h
kbuild: clean up objtool_args slightly
modpost: get the *.mod file path more simply
checkkconfigsymbols.py: Fix the '--ignore' option
kbuild: merge vmlinux_link() between ARCH=um and other architectures
kbuild: do not remove 'linux' link in scripts/link-vmlinux.sh
kbuild: merge vmlinux_link() between the ordinary link and Clang LTO
kbuild: remove stale *.symversions
kbuild: remove unused quiet_cmd_update_lto_symversions
gen_compile_commands: extract compiler command from a series of commands
x86: remove cc-option-yn test for -mtune=
arc: replace cc-option-yn uses with cc-option
s390: replace cc-option-yn uses with cc-option
ia64: move core-y in arch/ia64/Makefile to arch/ia64/Kbuild
sparc: move the install rule to arch/sparc/Makefile
security: remove unneeded subdir-$(CONFIG_...)
kbuild: sh: remove unused install script
kbuild: Fix 'no symbols' warning when CONFIG_TRIM_UNUSD_KSYMS=y
kbuild: Switch to 'f' variants of integrated assembler flag
kbuild: Shuffle blank line to improve comment meaning
...
- Convert pseries & powernv to use MSI IRQ domains.
- Rework the pseries CPU numbering so that CPUs that are removed, and later re-added, are
given a CPU number on the same node as previously, when possible.
- Add support for a new more flexible device-tree format for specifying NUMA distances.
- Convert powerpc to GENERIC_PTDUMP.
- Retire sbc8548 and sbc8641d board support.
- Various other small features and fixes.
Thanks to: Alexey Kardashevskiy, Aneesh Kumar K.V, Anton Blanchard, Cédric Le Goater,
Christophe Leroy, Emmanuel Gil Peyrot, Fabiano Rosas, Fangrui Song, Finn Thain, Gautham R.
Shenoy, Hari Bathini, Joel Stanley, Jordan Niethe, Kajol Jain, Laurent Dufour, Leonardo
Bras, Lukas Bulwahn, Marc Zyngier, Masahiro Yamada, Michal Suchanek, Nathan Chancellor,
Nicholas Piggin, Parth Shah, Paul Gortmaker, Pratik R. Sampat, Randy Dunlap, Sebastian
Andrzej Siewior, Srikar Dronamraju, Wan Jiabing, Xiongwei Song, Zheng Yongjun.
-----BEGIN PGP SIGNATURE-----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=EbN0
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Convert pseries & powernv to use MSI IRQ domains.
- Rework the pseries CPU numbering so that CPUs that are removed, and
later re-added, are given a CPU number on the same node as
previously, when possible.
- Add support for a new more flexible device-tree format for specifying
NUMA distances.
- Convert powerpc to GENERIC_PTDUMP.
- Retire sbc8548 and sbc8641d board support.
- Various other small features and fixes.
Thanks to Alexey Kardashevskiy, Aneesh Kumar K.V, Anton Blanchard,
Cédric Le Goater, Christophe Leroy, Emmanuel Gil Peyrot, Fabiano Rosas,
Fangrui Song, Finn Thain, Gautham R. Shenoy, Hari Bathini, Joel
Stanley, Jordan Niethe, Kajol Jain, Laurent Dufour, Leonardo Bras, Lukas
Bulwahn, Marc Zyngier, Masahiro Yamada, Michal Suchanek, Nathan
Chancellor, Nicholas Piggin, Parth Shah, Paul Gortmaker, Pratik R.
Sampat, Randy Dunlap, Sebastian Andrzej Siewior, Srikar Dronamraju, Wan
Jiabing, Xiongwei Song, and Zheng Yongjun.
* tag 'powerpc-5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (154 commits)
powerpc/bug: Cast to unsigned long before passing to inline asm
powerpc/ptdump: Fix generic ptdump for 64-bit
KVM: PPC: Fix clearing never mapped TCEs in realmode
powerpc/pseries/iommu: Rename "direct window" to "dma window"
powerpc/pseries/iommu: Make use of DDW for indirect mapping
powerpc/pseries/iommu: Find existing DDW with given property name
powerpc/pseries/iommu: Update remove_dma_window() to accept property name
powerpc/pseries/iommu: Reorganize iommu_table_setparms*() with new helper
powerpc/pseries/iommu: Add ddw_property_create() and refactor enable_ddw()
powerpc/pseries/iommu: Allow DDW windows starting at 0x00
powerpc/pseries/iommu: Add ddw_list_new_entry() helper
powerpc/pseries/iommu: Add iommu_pseries_alloc_table() helper
powerpc/kernel/iommu: Add new iommu_table_in_use() helper
powerpc/pseries/iommu: Replace hard-coded page shift
powerpc/numa: Update cpu_cpu_map on CPU online/offline
powerpc/numa: Print debug statements only when required
powerpc/numa: convert printk to pr_xxx
powerpc/numa: Drop dbg in favour of pr_debug
powerpc/smp: Enable CACHE domain for shared processor
powerpc/smp: Update cpu_core_map on all PowerPc systems
...
get_src_version() strips 'o' or 'lto.o' from the end of the object file
path (so, postfixlen is 1 or 5), then adds 'mod'.
If you look at the code closely, mod->name already holds the base path
with the extension stripped.
Most of the code changes made by commit 7ac204b545 ("modpost: lto:
strip .lto from module names") was actually unneeded.
sumversion.c does not need strends(), so it can get back local in
modpost.c again.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Expose an 'override_only' helper macro (i.e.
PCI_DRIVER_OVERRIDE_DEVICE_VFIO) for VFIO PCI sub system and add the
required code to prefix its matching entries with "vfio_" in
modules.alias file.
It allows VFIO device drivers to include match entries in the
modules.alias file produced by kbuild that are not used for normal
driver autoprobing and module autoloading. Drivers using these match
entries can be connected to the PCI device manually, by userspace, using
the existing driver_override sysfs.
For example the resulting modules.alias may have:
alias pci:v000015B3d00001021sv*sd*bc*sc*i* mlx5_core
alias vfio_pci:v000015B3d00001021sv*sd*bc*sc*i* mlx5_vfio_pci
alias vfio_pci:v*d*sv*sd*bc*sc*i* vfio_pci
In this example mlx5_core and mlx5_vfio_pci match to the same PCI
device. The kernel will autoload and autobind to mlx5_core but the
kernel and udev mechanisms will ignore mlx5_vfio_pci.
When userspace wants to change a device to the VFIO subsystem it can
implement a generic algorithm:
1) Identify the sysfs path to the device:
/sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0
2) Get the modalias string from the kernel:
$ cat /sys/bus/pci/devices/0000:01:00.0/modalias
pci:v000015B3d00001021sv000015B3sd00000001bc02sc00i00
3) Prefix it with vfio_:
vfio_pci:v000015B3d00001021sv000015B3sd00000001bc02sc00i00
4) Search modules.alias for the above string and select the entry that
has the fewest *'s:
alias vfio_pci:v000015B3d00001021sv*sd*bc*sc*i* mlx5_vfio_pci
5) modprobe the matched module name:
$ modprobe mlx5_vfio_pci
6) cat the matched module name to driver_override:
echo mlx5_vfio_pci > /sys/bus/pci/devices/0000:01:00.0/driver_override
7) unbind device from original module
echo 0000:01:00.0 > /sys/bus/pci/devices/0000:01:00.0/driver/unbind
8) probe PCI drivers (or explicitly bind to mlx5_vfio_pci)
echo 0000:01:00.0 > /sys/bus/pci/drivers_probe
The algorithm is independent of bus type. In future the other buses with
VFIO device drivers, like platform and ACPI, can use this algorithm as
well.
This patch is the infrastructure to provide the information in the
modules.alias to userspace. Convert the only VFIO pci_driver which results
in one new line in the modules.alias:
alias vfio_pci:v*d*sv*sd*bc*sc*i* vfio_pci
Later series introduce additional HW specific VFIO PCI drivers, such as
mlx5_vfio_pci.
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # for pci.h
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20210826103912.128972-11-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Using asm goto in __WARN_FLAGS() and WARN_ON() allows more
flexibility to GCC.
For that add an entry to the exception table so that
program_check_exception() knowns where to resume execution
after a WARNING.
Here are two exemples. The first one is done on PPC32 (which
benefits from the previous patch), the second is on PPC64.
unsigned long test(struct pt_regs *regs)
{
int ret;
WARN_ON(regs->msr & MSR_PR);
return regs->gpr[3];
}
unsigned long test9w(unsigned long a, unsigned long b)
{
if (WARN_ON(!b))
return 0;
return a / b;
}
Before the patch:
000003a8 <test>:
3a8: 81 23 00 84 lwz r9,132(r3)
3ac: 71 29 40 00 andi. r9,r9,16384
3b0: 40 82 00 0c bne 3bc <test+0x14>
3b4: 80 63 00 0c lwz r3,12(r3)
3b8: 4e 80 00 20 blr
3bc: 0f e0 00 00 twui r0,0
3c0: 80 63 00 0c lwz r3,12(r3)
3c4: 4e 80 00 20 blr
0000000000000bf0 <.test9w>:
bf0: 7c 89 00 74 cntlzd r9,r4
bf4: 79 29 d1 82 rldicl r9,r9,58,6
bf8: 0b 09 00 00 tdnei r9,0
bfc: 2c 24 00 00 cmpdi r4,0
c00: 41 82 00 0c beq c0c <.test9w+0x1c>
c04: 7c 63 23 92 divdu r3,r3,r4
c08: 4e 80 00 20 blr
c0c: 38 60 00 00 li r3,0
c10: 4e 80 00 20 blr
After the patch:
000003a8 <test>:
3a8: 81 23 00 84 lwz r9,132(r3)
3ac: 71 29 40 00 andi. r9,r9,16384
3b0: 40 82 00 0c bne 3bc <test+0x14>
3b4: 80 63 00 0c lwz r3,12(r3)
3b8: 4e 80 00 20 blr
3bc: 0f e0 00 00 twui r0,0
0000000000000c50 <.test9w>:
c50: 7c 89 00 74 cntlzd r9,r4
c54: 79 29 d1 82 rldicl r9,r9,58,6
c58: 0b 09 00 00 tdnei r9,0
c5c: 7c 63 23 92 divdu r3,r3,r4
c60: 4e 80 00 20 blr
c70: 38 60 00 00 li r3,0
c74: 4e 80 00 20 blr
In the first exemple, we see GCC doesn't need to duplicate what
happens after the trap.
In the second exemple, we see that GCC doesn't need to emit a test
and a branch in the likely path in addition to the trap.
We've got some WARN_ON() in .softirqentry.text section so it needs
to be added in the OTHER_TEXT_SECTIONS in modpost.c
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/389962b1b702e3c78d169e59bcfac56282889173.1618331882.git.christophe.leroy@csgroup.eu
One common cause of modpost version generation failures is a failure to
prototype exported assembly functions - the tooling requires this for
exported functions even if they are not and should not be called from C
code in order to do the version mangling for symbols. Unfortunately the
error message is currently rather abstruse, simply saying that "version
generation failed" and even diving into the code doesn't directly show
what's going on since there's several steps between the problem and it
being observed.
Provide an explicit hint as to the likely cause of a version generation
failure to help anyone who runs into this in future more readily diagnose
and fix the problem.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The pattern prefixed with '/' matches files in the same directory,
but not ones in sub-directories.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Andra Paraschiv <andraprs@amazon.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Currently, clang LTO built vmlinux won't work with pahole.
LTO introduced cross-cu dwarf tag references and broke
current pahole model which handles one cu as a time.
The solution is to merge all cu's as one pahole cu as in [1].
We would like to do this merging only if cross-cu dwarf
references happens. The LTO build mode is a pretty good
indication for that.
In earlier version of this patch ([2]), clang flag
-grecord-gcc-switches is proposed to add to compilation flags
so pahole could detect "-flto" and then merging cu's.
This will increate the binary size of 1% without LTO though.
Arnaldo suggested to use a note to indicate the vmlinux
is built with LTO. Such a cheap way to get whether the vmlinux
is built with LTO or not helps pahole but is also useful
for tracing as LTO may inline/delete/demote global functions,
promote static functions, etc.
So this patch added an elfnote with a new type LINUX_ELFNOTE_LTO_INFO.
The owner of the note is "Linux".
With gcc 8.4.1 and clang trunk, without LTO, I got
$ readelf -n vmlinux
Displaying notes found in: .notes
Owner Data size Description
...
Linux 0x00000004 func
description data: 00 00 00 00
...
With "readelf -x ".notes" vmlinux", I can verify the above "func"
with type code 0x101.
With clang thin-LTO, I got the same as above except the following:
description data: 01 00 00 00
which indicates the vmlinux is built with LTO.
[1] https://lore.kernel.org/bpf/20210325065316.3121287-1-yhs@fb.com/
[2] https://lore.kernel.org/bpf/20210331001623.2778934-1-yhs@fb.com/
Suggested-by: Arnaldo Carvalho de Melo <arnaldo.melo@gmail.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM/Clang v12.0.0-rc4 (x86-64)
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Nathan reports that the mips defconfig emits the following warning:
WARNING: modpost: Symbol info of vmlinux is missing. Unresolved symbol check will be entirely skipped.
This false-positive happens when CONFIG_TRIM_UNUSED_KSYMS is enabled,
but no CONFIG option is set to 'm'.
Commit a0590473c5 ("nfs: fix PNFS_FLEXFILE_LAYOUT Kconfig default")
turned the last 'm' into 'y' for the mips defconfig, and uncovered
this issue.
In this case, the module feature itself is enabled, but we have no
module to build. As a result, CONFIG_TRIM_UNUSED_KSYMS drops all the
instances of EXPORT_SYMBOL. Then, modpost wrongly assumes vmlinux is
missing because vmlinux.symvers is empty. (As another false-positive
case, you can create a module that does not use any symbol of vmlinux).
The current behavior is to entirely suppress the unresolved symbol
warnings when vmlinux is missing just because there are too many.
I found the origin of this code in the historical git tree. [1]
If this is a matter of noisiness, I think modpost can display the
first 10 warnings, and the number of suppressed warnings at the end.
You will get a bit noisier logs when you run 'make modules' without
vmlinux, but such warnings are better to show because you never know
the resulting modules are actually loadable or not.
This commit changes the following:
- If any of input *.symver files is missing, pass -w option to let
the module build keep going with warnings instead of errors.
- If there are too many (10+) unresolved symbol warnings, show only
the first 10, and also the number of suppressed warnings.
[1]: https://git.kernel.org/pub/scm/linux/kernel/git/history/history.git/commit/?id=1cc0e0529569bf6a94f6d49770aa6d4b599d2c46
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The external module build shows the following warning if Module.symvers
is missing in the kernel tree.
WARNING: Symbol version dump "Module.symvers" is missing.
Modules may not have dependencies or modversions.
I think this is an important heads-up because the resulting modules may
not work as expected. This happens when you did not build the entire
kernel tree, for example, you might have prepared the minimal setups
for external modules by 'make defconfig && make modules_preapre'.
A problem is that 'make modules' creates Module.symvers even without
vmlinux. In this case, that warning is suppressed since Module.symvers
already exists in spite of its incomplete content.
The incomplete (i.e. invalid) Module.symvers should not be created.
This commit changes the second pass of modpost to dump symbols into
modules-only.symvers. The final Module.symvers is created by
concatenating vmlinux.symvers and modules-only.symvers if both exist.
Module.symvers is supposed to collect symbols from both vmlinux and
modules. It might be a bit confusing, and I am not quite sure if it
is an official interface, but presumably it is difficult to rename it
because some tools (e.g. kmod) parse it.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Here is the large set of char/misc/whatever driver subsystem updates for
5.12-rc1. Over time it seems like this tree is collecting more and more
tiny driver subsystems in one place, making it easier for those
maintainers, which is why this is getting larger.
Included in here are:
- coresight driver updates
- habannalabs driver updates
- virtual acrn driver addition (proper acks from the x86
maintainers)
- broadcom misc driver addition
- speakup driver updates
- soundwire driver updates
- fpga driver updates
- amba driver updates
- mei driver updates
- vfio driver updates
- greybus driver updates
- nvmeem driver updates
- phy driver updates
- mhi driver updates
- interconnect driver udpates
- fsl-mc bus driver updates
- random driver fix
- some small misc driver updates (rtsx, pvpanic, etc.)
All of these have been in linux-next for a while, with the only reported
issue being a merge conflict in include/linux/mod_devicetable.h that you
will hit in your tree due to the dfl_device_id addition from the fpga
subsystem in here. The resolution should be simple.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYDZf9w8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yk3xgCcCEN+pCJTum+uAzSNH3YKs/onaDgAnRSVwOUw
tNW6n1JhXLYl9f5JdhvS
=MOHs
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the large set of char/misc/whatever driver subsystem updates
for 5.12-rc1. Over time it seems like this tree is collecting more and
more tiny driver subsystems in one place, making it easier for those
maintainers, which is why this is getting larger.
Included in here are:
- coresight driver updates
- habannalabs driver updates
- virtual acrn driver addition (proper acks from the x86 maintainers)
- broadcom misc driver addition
- speakup driver updates
- soundwire driver updates
- fpga driver updates
- amba driver updates
- mei driver updates
- vfio driver updates
- greybus driver updates
- nvmeem driver updates
- phy driver updates
- mhi driver updates
- interconnect driver udpates
- fsl-mc bus driver updates
- random driver fix
- some small misc driver updates (rtsx, pvpanic, etc.)
All of these have been in linux-next for a while, with the only
reported issue being a merge conflict due to the dfl_device_id
addition from the fpga subsystem in here"
* tag 'char-misc-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (311 commits)
spmi: spmi-pmic-arb: Fix hw_irq overflow
Documentation: coresight: Add PID tracing description
coresight: etm-perf: Support PID tracing for kernel at EL2
coresight: etm-perf: Clarify comment on perf options
ACRN: update MAINTAINERS: mailing list is subscribers-only
regmap: sdw-mbq: use MODULE_LICENSE("GPL")
regmap: sdw: use no_pm routines for SoundWire 1.2 MBQ
regmap: sdw: use _no_pm functions in regmap_read/write
soundwire: intel: fix possible crash when no device is detected
MAINTAINERS: replace my with email with replacements
mhi: Fix double dma free
uapi: map_to_7segment: Update example in documentation
uio: uio_pci_generic: don't fail probe if pdev->irq equals to IRQ_NOTCONNECTED
drivers/misc/vmw_vmci: restrict too big queue size in qp_host_alloc_queue
firewire: replace tricky statement by two simple ones
vme: make remove callback return void
firmware: google: make coreboot driver's remove callback return void
firmware: xilinx: Use explicit values for all enum values
sample/acrn: Introduce a sample of HSM ioctl interface usage
virt: acrn: Introduce an interface for Service VM to control vCPU
...
Summary of modules changes for the 5.12 merge window:
- Retire EXPORT_UNUSED_SYMBOL() and EXPORT_SYMBOL_GPL_FUTURE(). These export
types were introduced between 2006 - 2008. All the of the unused symbols have
been long removed and gpl future symbols were converted to gpl quite a long
time ago, and I don't believe these export types have been used ever since.
So, I think it should be safe to retire those export types now. (Christoph Hellwig)
- Refactor and clean up some aged code cruft in the module loader (Christoph Hellwig)
- Build {,module_}kallsyms_on_each_symbol only when livepatching is enabled, as
it is the only caller (Christoph Hellwig)
- Unexport find_module() and module_mutex and fix the last module
callers to not rely on these anymore. Make module_mutex internal to
the module loader. (Christoph Hellwig)
- Harden ELF checks on module load and validate ELF structures before checking
the module signature (Frank van der Linden)
- Fix undefined symbol warning for clang (Fangrui Song)
- Fix smatch warning (Dan Carpenter)
Signed-off-by: Jessica Yu <jeyu@kernel.org>
-----BEGIN PGP SIGNATURE-----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=T29Q
-----END PGP SIGNATURE-----
Merge tag 'modules-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull module updates from Jessica Yu:
- Retire EXPORT_UNUSED_SYMBOL() and EXPORT_SYMBOL_GPL_FUTURE(). These
export types were introduced between 2006 - 2008. All the of the
unused symbols have been long removed and gpl future symbols were
converted to gpl quite a long time ago, and I don't believe these
export types have been used ever since. So, I think it should be safe
to retire those export types now (Christoph Hellwig)
- Refactor and clean up some aged code cruft in the module loader
(Christoph Hellwig)
- Build {,module_}kallsyms_on_each_symbol only when livepatching is
enabled, as it is the only caller (Christoph Hellwig)
- Unexport find_module() and module_mutex and fix the last module
callers to not rely on these anymore. Make module_mutex internal to
the module loader (Christoph Hellwig)
- Harden ELF checks on module load and validate ELF structures before
checking the module signature (Frank van der Linden)
- Fix undefined symbol warning for clang (Fangrui Song)
- Fix smatch warning (Dan Carpenter)
* tag 'modules-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
module: potential uninitialized return in module_kallsyms_on_each_symbol()
module: remove EXPORT_UNUSED_SYMBOL*
module: remove EXPORT_SYMBOL_GPL_FUTURE
module: move struct symsearch to module.c
module: pass struct find_symbol_args to find_symbol
module: merge each_symbol_section into find_symbol
module: remove each_symbol_in_section
module: mark module_mutex static
kallsyms: only build {,module_}kallsyms_on_each_symbol when required
kallsyms: refactor {,module_}kallsyms_on_each_symbol
module: use RCU to synchronize find_module
module: unexport find_module and module_mutex
drm: remove drm_fb_helper_modinit
powerpc/powernv: remove get_cxl_module
module: harden ELF info handling
module: Ignore _GLOBAL_OFFSET_TABLE_ when warning for undefined symbols
- Clang LTO build infrastructure and arm64-specific enablement (Sami Tolvanen)
- Recursive build CC_FLAGS_LTO fix (Alexander Lobakin)
-----BEGIN PGP SIGNATURE-----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=6peY
-----END PGP SIGNATURE-----
Merge tag 'clang-lto-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull clang LTO updates from Kees Cook:
"Clang Link Time Optimization.
This is built on the work done preparing for LTO by arm64 folks,
tracing folks, etc. This includes the core changes as well as the
remaining pieces for arm64 (LTO has been the default build method on
Android for about 3 years now, as it is the prerequisite for the
Control Flow Integrity protections).
While x86 LTO enablement is done, it depends on some pending objtool
clean-ups. It's possible that I'll send a "part 2" pull request for
LTO that includes x86 support.
For merge log posterity, and as detailed in commit dc5723b02e
("kbuild: add support for Clang LTO"), here is the lt;dr to do an LTO
build:
make LLVM=1 LLVM_IAS=1 defconfig
scripts/config -e LTO_CLANG_THIN
make LLVM=1 LLVM_IAS=1
(To do a cross-compile of arm64, add "CROSS_COMPILE=aarch64-linux-gnu-"
and "ARCH=arm64" to the "make" command lines.)
Summary:
- Clang LTO build infrastructure and arm64-specific enablement (Sami
Tolvanen)
- Recursive build CC_FLAGS_LTO fix (Alexander Lobakin)"
* tag 'clang-lto-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
kbuild: prevent CC_FLAGS_LTO self-bloating on recursive rebuilds
arm64: allow LTO to be selected
arm64: disable recordmcount with DYNAMIC_FTRACE_WITH_REGS
arm64: vdso: disable LTO
drivers/misc/lkdtm: disable LTO for rodata.o
efi/libstub: disable LTO
scripts/mod: disable LTO for empty.c
modpost: lto: strip .lto from module names
PCI: Fix PREL32 relocations for LTO
init: lto: fix PREL32 relocations
init: lto: ensure initcall ordering
kbuild: lto: add a default list of used symbols
kbuild: lto: merge module sections
kbuild: lto: limit inlining
kbuild: lto: fix module versioning
kbuild: add support for Clang LTO
tracing: move function tracer options to Kconfig
EXPORT_UNUSED_SYMBOL* is not actually used anywhere. Remove the
unused functionality as we generally just remove unused code anyway.
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
As far as I can tell this has never been used at all, and certainly
not any time recently.
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
With CONFIG_LTO_CLANG, clang generates LLVM IR instead of ELF object
files. As empty.o is used for probing target properties, disable LTO
for it to produce an object file instead.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20201211184633.3213045-12-samitolvanen@google.com
With LTO, everything is compiled into LLVM bitcode, so we have to link
each module into native code before modpost. Kbuild uses the .lto.o
suffix for these files, which also ends up in module information. This
change strips the unnecessary .lto suffix from the module name.
Suggested-by: Bill Wendling <morbo@google.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20201211184633.3213045-11-samitolvanen@google.com
Device Feature List (DFL) is a linked list of feature headers within the
device MMIO space. It is used by FPGA to enumerate multiple sub features
within it. Each feature can be uniquely identified by DFL type and
feature id, which can be read out from feature headers.
A dfl bus helps DFL framework modularize DFL device drivers for
different sub features. The dfl bus matches its devices and drivers by
DFL type and feature id.
This patch adds dfl bus support to MODULE_DEVICE_TABLE() by adding info
about struct dfl_device_id in devicetable-offsets.c and add a dfl entry
point in file2alias.c.
Acked-by: Wu Hao <hao.wu@intel.com>
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Wu Hao <hao.wu@intel.com>
Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Link: https://lore.kernel.org/r/20210107043714.991646-6-mdf@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Surface Aggregator EC provides varying functionality, depending on
the Surface device. To manage this functionality, we use dedicated
client devices for each subsystem or virtual device of the EC. While
some of these clients are described as standard devices in ACPI and the
corresponding client drivers can be implemented as platform drivers in
the kernel (making use of the controller API already present), many
devices, especially on newer Surface models, cannot be found there.
To simplify management of these devices, we introduce a new bus and
client device type for the Surface Aggregator subsystem. The new device
type takes care of managing the controller reference, essentially
guaranteeing its validity for as long as the client device exists, thus
alleviating the need to manually establish device links for that purpose
in the client driver (as has to be done with the platform devices).
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20201221183959.1186143-7-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
- Use /usr/bin/env for shebang lines in scripts
- Remove useless -Wnested-externs warning flag
- Update documents
- Refactor log handling in modpost
- Stop building modules without MODULE_LICENSE() tag
- Make the insane combination of 'static' and EXPORT_SYMBOL an error
- Improve genksyms to handle _Static_assert()
-----BEGIN PGP SIGNATURE-----
iQJJBAABCgAzFiEEbmPs18K1szRHjPqEPYsBB53g2wYFAl/iIY8VHG1hc2FoaXJv
eUBrZXJuZWwub3JnAAoJED2LAQed4NsGbfsP+gMv3F+ztqfYNoMNmZcj+fLh4zrA
8I3d0t0AoxovV1bsyVDk9nebsYLbDdsyCdHM1ZNFAFEpf9QLL8sxtpHvaaxy+rCq
PCmy+E6iO5B91oORhuqpYpcmmgPHf4RrpUcnEEiWOMrHE5giYbXz3AiqGAt/88J5
Y8yaPCQVhNJNkx73KHCMYLVp97xPGa5HvNrcskAueA8uG+FCRDFaIqFX+OYbGnmC
/3kVAJmX6i2kNPzvnXpAW6mTbI/z7+s/k5yRbEFYNUtJqN+BfaFadV8pyOGXQr1T
fwXVtXdWqVg7rbqupyVYItLHaOq2RBm4PJuee/8s7ooBI1y7U6N0HZCj+jES92ML
wuqEyED+lLzmxRyfhmrFH/5XhxacciO7dQb9Woe5FQ6QOm+tQPtwCnxwrSSAK4XU
k7CsJ+OMJI+JulFrgPuC/rcESjTAsgL2j4SDhsO0GLV+Qb/P9kXR88jt5eJygmSx
xZWpI+FUUY/Ihw648i2pkHGS/NmfOrT78X4nvbOWMDKOV02NEoMmLDYnZPUIoetn
yUo8+xSBp6n3aTy5TDtrMblNRUJwL9OzDlDiEjsPtNUJZ6sdQzFRsxJ7+FCw2Ley
rKN2r+i5FdyAq0LLHDhoEcJxFY7cj+yAsd0QqtBb0NZLgLsaPiP7w45CXRNpqkWG
BbK+F1E9jP8VfiZu
=+27V
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Use /usr/bin/env for shebang lines in scripts
- Remove useless -Wnested-externs warning flag
- Update documents
- Refactor log handling in modpost
- Stop building modules without MODULE_LICENSE() tag
- Make the insane combination of 'static' and EXPORT_SYMBOL an error
- Improve genksyms to handle _Static_assert()
* tag 'kbuild-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
Documentation/kbuild: Document platform dependency practises
Documentation/kbuild: Document COMPILE_TEST dependencies
genksyms: Ignore module scoped _Static_assert()
modpost: turn static exports into error
modpost: turn section mismatches to error from fatal()
modpost: change license incompatibility to error() from fatal()
modpost: turn missing MODULE_LICENSE() into error
modpost: refactor error handling and clarify error/fatal difference
modpost: rename merror() to error()
kbuild: don't hardcode depmod path
kbuild: doc: document subdir-y syntax
kbuild: doc: clarify the difference between extra-y and always-y
kbuild: doc: split if_changed explanation to a separate section
kbuild: doc: merge 'Special Rules' and 'Custom kbuild commands' sections
kbuild: doc: fix 'List directories to visit when descending' section
kbuild: doc: replace arch/$(ARCH)/ with arch/$(SRCARCH)/
kbuild: doc: update the description about kbuild Makefiles
Makefile.extrawarn: remove -Wnested-externs warning
tweewide: Fix most Shebang lines
Using EXPORT_SYMBOL*() on static functions is fundamentally wrong.
Modpost currently reports that as a warning, but clearly this is not a
pattern we should allow, and all in-tree occurences should have been
fixed by now. So, promote the warn() message to error() to make sure
this never happens again.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
There is code that reports static EXPORT_SYMBOL a few lines below.
It is not a good idea to bail out here.
I renamed sec_mismatch_fatal to sec_mismatch_warn_only (with logical
inversion) to match to CONFIG_SECTION_MISMATCH_WARN_ONLY.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Change fatal() to error() to continue running to report more possible
issues.
There is no difference in the fact that modpost will fail anyway.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
We have 3 log functions. fatal() is special because it lets modpost bail
out immediately. The difference between warn() and error() is the only
prefix parts ("WARNING:" vs "ERROR:").
In my understanding, the expected handling of error() is to propagate
the return code of the function to the exit code of modpost, as
check_exports() etc. already does. This is a good manner in general
because we should display as many error messages as possible in a
single run of modpost.
What is annoying about fatal() is that it kills modpost at the first
error. People would need to run Kbuild again and again until they fix
all errors.
But, unfortunately, people tend to do:
"This case should not be allowed. Let's replace warn() with fatal()."
One of the reasons is probably it is tedious to manually hoist the error
code to the main() function.
This commit refactors error() so any single call for it automatically
makes modpost return the error code.
I also added comments in modpost.h for warn(), error(), and fatal().
Please use fatal() only when you have a strong reason to do so.
For example:
- Memory shortage (i.e. malloc() etc. has failed)
- The ELF file is broken, and there is no point to continue parsing
- Something really odd has happened
For general coding errors, please use error().
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Quentin Perret <qperret@google.com>
The log function names, warn(), merror(), fatal() are inconsistent.
Commit 2a11665945 ("kbuild: distinguish between errors and warnings
in modpost") intentionally chose merror() to avoid the conflict with
the library function error(). See man page of error(3).
But, we are already causing the conflict with warn() because it is also
a library function. See man page of warn(3). err() would be a problem
for the same reason.
The common technique to work around name conflicts is to use macros.
For example:
/* in a header */
#define error(fmt, ...) __error(fmt, ##__VA_ARGS__)
#define warn(fmt, ...) __warn(fmt, ##__VA_ARGS__)
/* function definition */
void __error(const char *fmt, ...)
{
<our implementation>
}
void __warn(const char *fmt, ...)
{
<our implementation>
}
In this way, we can implement our own warn() and error(), still we can
include <error.h> and <err.h> with no problem.
And, commit 93c95e526a ("modpost: rework and consolidate logging
interface") already did that.
Since the log functions are all macros, we can use error() without
causing "conflicting types" errors.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Add support for the Auxiliary Bus, auxiliary_device and auxiliary_driver.
It enables drivers to create an auxiliary_device and bind an
auxiliary_driver to it.
The bus supports probe/remove shutdown and suspend/resume callbacks.
Each auxiliary_device has a unique string based id; driver binds to
an auxiliary_device based on this id through the bus.
Co-developed-by: Kiran Patil <kiran.patil@intel.com>
Co-developed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Co-developed-by: Fred Oh <fred.oh@linux.intel.com>
Co-developed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Kiran Patil <kiran.patil@intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Fred Oh <fred.oh@linux.intel.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Martin Habets <mhabets@solarflare.com>
Link: https://lore.kernel.org/r/20201113161859.1775473-2-david.m.ertman@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/160695681289.505290.8978295443574440604.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use a more generic form for __section that requires quotes to avoid
complications with clang and gcc differences.
Remove the quote operator # from compiler_attributes.h __section macro.
Convert all unquoted __section(foo) uses to quoted __section("foo").
Also convert __attribute__((section("foo"))) uses to __section("foo")
even if the __attribute__ has multiple list entry forms.
Conversion done using the script at:
https://lore.kernel.org/lkml/75393e5ddc272dc7403de74d645e6c6e0f4e70eb.camel@perches.com/2-convert_section.pl
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@gooogle.com>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- run the checker (e.g. sparse) after the compiler
- remove unneeded cc-option tests for old compiler flags
- fix tar-pkg to install dtbs
- introduce ccflags-remove-y and asflags-remove-y syntax
- allow to trace functions in sub-directories of lib/
- introduce hostprogs-always-y and userprogs-always-y syntax
- various Makefile cleanups
-----BEGIN PGP SIGNATURE-----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=bkNQ
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- run the checker (e.g. sparse) after the compiler
- remove unneeded cc-option tests for old compiler flags
- fix tar-pkg to install dtbs
- introduce ccflags-remove-y and asflags-remove-y syntax
- allow to trace functions in sub-directories of lib/
- introduce hostprogs-always-y and userprogs-always-y syntax
- various Makefile cleanups
* tag 'kbuild-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: stop filtering out $(GCC_PLUGINS_CFLAGS) from cc-option base
kbuild: include scripts/Makefile.* only when relevant CONFIG is enabled
kbuild: introduce hostprogs-always-y and userprogs-always-y
kbuild: sort hostprogs before passing it to ifneq
kbuild: move host .so build rules to scripts/gcc-plugins/Makefile
kbuild: Replace HTTP links with HTTPS ones
kbuild: trace functions in subdirectories of lib/
kbuild: introduce ccflags-remove-y and asflags-remove-y
kbuild: do not export LDFLAGS_vmlinux
kbuild: always create directories of targets
powerpc/boot: add DTB to 'targets'
kbuild: buildtar: add dtbs support
kbuild: remove cc-option test of -ffreestanding
kbuild: remove cc-option test of -fno-stack-protector
Revert "kbuild: Create directory for target DTB"
kbuild: run the checker after the compiler
To build host programs, you need to add the program names to 'hostprogs'
to use the necessary build rule, but it is not enough to build them
because there is no dependency.
There are two types of host programs: built as the prerequisite of
another (e.g. gen_crc32table in lib/Makefile), or always built when
Kbuild visits the Makefile (e.g. genksyms in scripts/genksyms/Makefile).
The latter is typical in Makefiles under scripts/, which contains host
programs globally used during the kernel build. To build them, you need
to add them to both 'hostprogs' and 'always-y'.
This commit adds hostprogs-always-y as a shorthand.
The same applies to user programs. net/bpfilter/Makefile builds
bpfilter_umh on demand, hence always-y is unneeded. In contrast,
programs under samples/ are added to both 'userprogs' and 'always-y'
so they are always built when Kbuild visits the Makefiles.
userprogs-always-y works as a shorthand.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Here is the large set of char and misc and other driver subsystem
patches for 5.9-rc1. Lots of new driver submissions in here, and
cleanups and features for existing drivers.
Highlights are:
- habanalabs driver updates
- coresight driver updates
- nvmem driver updates
- huge number of "W=1" build warning cleanups from Lee Jones
- dyndbg updates
- virtbox driver fixes and updates
- soundwire driver updates
- mei driver updates
- phy driver updates
- fpga driver updates
- lots of smaller individual misc/char driver cleanups and fixes
Full details are in the shortlog.
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXylccQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymofgCfZ1CxNWd0ZVM0YIn8cY9gO6ON7MsAnRq48hvn
Vjf4rKM73GC11bVF4Gyy
=Xq1R
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the large set of char and misc and other driver subsystem
patches for 5.9-rc1. Lots of new driver submissions in here, and
cleanups and features for existing drivers.
Highlights are:
- habanalabs driver updates
- coresight driver updates
- nvmem driver updates
- huge number of "W=1" build warning cleanups from Lee Jones
- dyndbg updates
- virtbox driver fixes and updates
- soundwire driver updates
- mei driver updates
- phy driver updates
- fpga driver updates
- lots of smaller individual misc/char driver cleanups and fixes
Full details are in the shortlog.
All of these have been in linux-next with no reported issues"
* tag 'char-misc-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (322 commits)
habanalabs: remove unused but set variable 'ctx_asid'
nvmem: qcom-spmi-sdam: Enable multiple devices
dt-bindings: nvmem: SID: add binding for A100's SID controller
nvmem: update Kconfig description
nvmem: qfprom: Add fuse blowing support
dt-bindings: nvmem: Add properties needed for blowing fuses
dt-bindings: nvmem: qfprom: Convert to yaml
nvmem: qfprom: use NVMEM_DEVID_AUTO for multiple instances
nvmem: core: add support to auto devid
nvmem: core: Add nvmem_cell_read_u8()
nvmem: core: Grammar fixes for help text
nvmem: sc27xx: add sc2730 efuse support
nvmem: Enforce nvmem stride in the sysfs interface
MAINTAINERS: Add git tree for NVMEM FRAMEWORK
nvmem: sprd: Fix return value of sprd_efuse_probe()
drivers: android: Fix the SPDX comment style
drivers: android: Fix a variable declaration coding style issue
drivers: android: Remove braces for a single statement if-else block
drivers: android: Remove the use of else after return
drivers: android: Fix a variable declaration coding style issue
...
Mention why we open-code strsep, so it is clear that it is intentional.
Fixes: 736bb11898 ("modpost: remove use of non-standard strsep() in HOSTCC code")
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
strsep() is neither standard C nor POSIX and used outside
the kernel code here. Using it here requires that the
build host supports it out of the box which is e.g.
not true for a Darwin build host and using a cross-compiler.
This leads to:
scripts/mod/modpost.c:145:2: warning: implicit declaration of function 'strsep' [-Wimplicit-function-declaration]
return strsep(stringp, "\n");
^
and a segfault when running MODPOST.
See also: https://stackoverflow.com/a/7219504
So let's replace this by strchr() instead of using strsep().
It does not hurt kernel size or speed since this code is run
on the build host.
Fixes: ac5100f543 ("modpost: add read_text_file() and get_line() helpers")
Co-developed-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The SoundWire 1.2 specification adds new capabilities that were not
present in previous version, such as the class ID.
To enable support for class drivers, and well as drivers that address
a specific version, all fields of the sdw_device_id structure need to
be exposed. For SoundWire 1.0 and 1.1 devices, a wildcard is used so
class and version information are ignored.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200608205436.2402-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
- fix warnings in 'make clean' for ARCH=um, hexagon, h8300, unicore32
- ensure to rebuild all objects when the compiler is upgraded
- exclude system headers from dependency tracking and fixdep processing
- fix potential bit-size mismatch between the kernel and BPF user-mode
helper
- add the new syntax 'userprogs' to build user-space programs for the
target architecture (the same arch as the kernel)
- compile user-space sample code under samples/ for the target arch
instead of the host arch
- make headers_install fail if a CONFIG option is leaked to user-space
- sanitize the output format of scripts/checkstack.pl
- handle ARM 'push' instruction in scripts/checkstack.pl
- error out before modpost if a module name conflict is found
- error out when multiple directories are passed to M= because this
feature is broken for a long time
- add CONFIG_DEBUG_INFO_COMPRESSED to support compressed debug info
- a lot of cleanups of modpost
- dump vmlinux symbols out into vmlinux.symvers, and reuse it in the
second pass of modpost
- do not run the second pass of modpost if nothing in modules is updated
- install modules.builtin(.modinfo) by 'make install' as well as by
'make modules_install' because it is useful even when CONFIG_MODULES=n
- add new command line variables, GZIP, BZIP2, LZOP, LZMA, LZ4, and XZ
to allow users to use alternatives such as pigz, pbzip2, etc.
-----BEGIN PGP SIGNATURE-----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=GKe5
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- fix warnings in 'make clean' for ARCH=um, hexagon, h8300, unicore32
- ensure to rebuild all objects when the compiler is upgraded
- exclude system headers from dependency tracking and fixdep processing
- fix potential bit-size mismatch between the kernel and BPF user-mode
helper
- add the new syntax 'userprogs' to build user-space programs for the
target architecture (the same arch as the kernel)
- compile user-space sample code under samples/ for the target arch
instead of the host arch
- make headers_install fail if a CONFIG option is leaked to user-space
- sanitize the output format of scripts/checkstack.pl
- handle ARM 'push' instruction in scripts/checkstack.pl
- error out before modpost if a module name conflict is found
- error out when multiple directories are passed to M= because this
feature is broken for a long time
- add CONFIG_DEBUG_INFO_COMPRESSED to support compressed debug info
- a lot of cleanups of modpost
- dump vmlinux symbols out into vmlinux.symvers, and reuse it in the
second pass of modpost
- do not run the second pass of modpost if nothing in modules is
updated
- install modules.builtin(.modinfo) by 'make install' as well as by
'make modules_install' because it is useful even when
CONFIG_MODULES=n
- add new command line variables, GZIP, BZIP2, LZOP, LZMA, LZ4, and XZ
to allow users to use alternatives such as pigz, pbzip2, etc.
* tag 'kbuild-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (96 commits)
kbuild: add variables for compression tools
Makefile: install modules.builtin even if CONFIG_MODULES=n
mksysmap: Fix the mismatch of '.L' symbols in System.map
kbuild: doc: rename LDFLAGS to KBUILD_LDFLAGS
modpost: change elf_info->size to size_t
modpost: remove is_vmlinux() helper
modpost: strip .o from modname before calling new_module()
modpost: set have_vmlinux in new_module()
modpost: remove mod->skip struct member
modpost: add mod->is_vmlinux struct member
modpost: remove is_vmlinux() call in check_for_{gpl_usage,unused}()
modpost: remove mod->is_dot_o struct member
modpost: move -d option in scripts/Makefile.modpost
modpost: remove -s option
modpost: remove get_next_text() and make {grab,release_}file static
modpost: use read_text_file() and get_line() for reading text files
modpost: avoid false-positive file open error
modpost: fix potential mmap'ed file overrun in get_src_version()
modpost: add read_text_file() and get_line() helpers
modpost: do not call get_modinfo() for vmlinux(.o)
...
Now that is_vmlinux() is called only in new_module(), we can inline
the function call.
modname is the basename with '.o' is stripped. No need to compare it
with 'vmlinux.o'.
vmlinux is always located at the current working directory. No need
to strip the directory path.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
new_module() conditionally strips the .o because the modname has .o
suffix when it is called from read_symbols(), but no .o when it is
called from read_dump().
It is clearer to strip .o in read_symbols().
I also used flexible-array for mod->name.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The meaning of 'skip' is obscure since it does not explain
"what to skip".
mod->skip is set when it is vmlinux or the module info came from
a dump file.
So, mod->skip is equivalent to (mod->is_vmlinux || mod->from_dump).
For the check in write_namespace_deps_files(), mod->is_vmlinux is
unneeded because the -d option is not passed in the first pass of
modpost.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
is_vmlinux() is called in several places to check whether the current
module is vmlinux or not.
It is faster and clearer to check mod->is_vmlinux flag.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
check_exports() is never called for vmlinux because mod->skip is set
for vmlinux.
Hence, check_for_gpl_usage() and check_for_unused() are not called
for vmlinux, either. is_vmlinux() is always false here.
Remove the is_vmlinux() calls, and hard-code the ".ko" suffix.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Previously, there were two cases where mod->is_dot_o is unset:
[1] the executable 'vmlinux' in the second pass of modpost
[2] modules loaded by read_dump()
I think [1] was intended usage to distinguish 'vmlinux.o' and 'vmlinux'.
Now that modpost does not parse the executable 'vmlinux', this case
does not happen.
[2] is obscure, maybe a bug. Module.symver stores module paths without
extension. So, none of modules loaded by read_dump() has the .o suffix,
and new_module() unsets ->is_dot_o. Anyway, it is not a big deal because
handle_symbol() is not called for the case.
To sum up, all the parsed ELF files are .o files.
mod->is_dot_o is unneeded.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The -s option was added by commit 8d8d8289df ("kbuild: do not do
section mismatch checks on vmlinux in 2nd pass").
Now that the second pass does not parse vmlinux, this option is
unneeded.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
get_next_line() is no longer used. Remove.
grab_file() and release_file() are only used in modpost.c. Make them
static.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
grab_file() mmaps a file, but it is not so efficient here because
get_next_line() copies every line to the temporary buffer anyway.
read_text_file() and get_line() are simpler. get_line() exploits the
library function strchr().
Going forward, the missing *.symvers or *.cmd is a fatal error.
This should not happen because scripts/Makefile.modpost guards the
-i option files with $(wildcard $(input-symdump)).
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
One problem of grab_file() is that it cannot distinguish the following
two cases:
- It cannot read the file (the file does not exist, or read permission
is not set)
- It can read the file, but the file size is zero
This is because grab_file() calls mmap(), which requires the mapped
length is greater than 0. Hence, grab_file() fails for both cases.
If an empty header file were included for checksum calculation, the
following warning would be printed:
WARNING: modpost: could not open ...: Invalid argument
An empty file is a valid source file, so it should not fail.
Use read_text_file() instead. It can read a zero-length file.
Then, parse_file() will succeed with doing nothing.
Going forward, the first case (it cannot read the file) is a fatal
error. If the source file from which an object was compiled is missing,
something went wrong.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
I do not know how reliably this function works, but it looks dangerous
to me.
strchr(sources, '\n');
... continues searching until it finds '\n' or it reaches the '\0'
terminator. In other words, 'sources' should be a null-terminated
string.
However, grab_file() just mmaps a file, so 'sources' is not terminated
with null byte. If the file does not contain '\n' at all, strchr() will
go beyond the mmap'ed memory.
Use read_text_file(), which loads the file content into a malloc'ed
buffer, appending null byte.
Here we are interested only in the first line of *.mod files. Use
get_line() helper to get the first line.
This also makes missing *.mod file a fatal error.
Commit 4be40e2223 ("kbuild: do not emit src version warning for
non-modules") ignored missing *.mod files.
I do not fully understand what that commit addressed, but commit
91341d4b2c ("kbuild: introduce new option to enhance section mismatch
analysis") introduced partial section checks by using modpost. built-in.o
was parsed by modpost. Even modules had a problem because *.mod files
were created after the modpost check.
Commit b7dca6dd1e ("kbuild: create *.mod with full directory path and
remove MODVERDIR") stopped doing that. Now that modpost is only invoked
after the directory descend, *.mod files should always exist at the
modpost stage.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
modpost uses grab_file() to open a file, but it is not suitable for
a text file because the mmap'ed file is not terminated by null byte.
Actually, I see some issues for the use of grab_file().
The new helper, read_text_file() loads the whole file content into a
malloc'ed buffer, and appends a null byte. Then, get_line() reads
each line.
To handle text files, I intend to replace as follows:
grab_file() -> read_text_file()
get_new_line() -> get_line()
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The three calls of get_modinfo() ("license", "import_ns", "version")
always return NULL for vmlinux(.o) because the built-in module info is
prefixed with __MODULE_INFO_PREFIX.
It is harmless to call get_modinfo(), but there is no point to search
for what apparently does not exist.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
As far as I understood, this code gets rid of '$Revision$' or '$Revision:'
of CVS, RCS or whatever in MODULE_VERSION() tags.
Remove the primeval code.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
check_exports() does not print warnings about unresolved symbols if
vmlinux is missing because there would be too many.
This situation happens when you do 'make modules' from the clean
tree, or compile external modules against a kernel tree that has
not been completely built.
It is dangerous to not check unresolved symbols because you might be
building useless modules. At least it should be warned.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Currently, the second pass of modpost is always invoked when you run
'make' or 'make modules' even if none of modules is changed.
Use if_changed to invoke it only when it is necessary.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Previously, the -i option had two functions; load a symbol dump file,
and set the external_module flag.
I want to assign a dedicate option for each of them.
Going forward, the -i is used to load a symbol dump file, and the -e
to set the external_module flag.
With this, we will be able to use -i for loading in-kernel symbols.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The -i option is used to include Modules.symver as well as files from
$(KBUILD_EXTRA_SYMBOLS).
Make the struct and variable names more generic.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Now that there is no difference between -i and -e, they can be unified.
Make modpost accept the -i option multiple times, then remove -e.
I will reuse -e for a different purpose.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The meaning of sym->kernel is obscure; it is set for in-kernel symbols
loaded from Modules.symvers. This happens only when we are building
external modules, and it is used to determine whether to dump symbols
to $(KBUILD_EXTMOD)/Modules.symvers
It is clearer to remember whether the symbol or module came from a dump
file or ELF object.
This changes the KBUILD_EXTRA_SYMBOLS behavior. Previously, symbols
loaded from KBUILD_EXTRA_SYMBOLS are accumulated into the current
$(KBUILD_EXTMOD)/Modules.symvers
Going forward, they will be only used to check symbol references, but
not dumped into the current $(KBUILD_EXTMOD)/Modules.symvers. I believe
this makes more sense.
sym->vmlinux will have no user. Remove it too.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Some vendors like HPe or Dell, encode the release version of their BIOS
in the "System BIOS {Major|Minor} Release" fields of Type 0.
This information is used to know which bios release actually runs.
It could be used for some quirks, debugging sessions or inventory tasks.
A typical output for a Dell system running the 65.27 bios is :
[root@t1700 ~]# cat /sys/devices/virtual/dmi/id/bios_release
65.27
[root@t1700 ~]#
Servers that have a BMC encode the release version of their firmware in the
"Embedded Controller Firmware {Major|Minor} Release" fields of Type 0.
This information is used to know which BMC release actually runs.
It could be used for some quirks, debugging sessions or inventory tasks.
A typical output for a Dell system running the 3.75 bmc release is :
[root@t1700 ~]# cat /sys/devices/virtual/dmi/id/ec_firmware_release
3.75
[root@t1700 ~]#
Signed-off-by: Erwan Velu <e.velu@criteo.com>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Pull networking updates from David Miller:
1) Allow setting bluetooth L2CAP modes via socket option, from Luiz
Augusto von Dentz.
2) Add GSO partial support to igc, from Sasha Neftin.
3) Several cleanups and improvements to r8169 from Heiner Kallweit.
4) Add IF_OPER_TESTING link state and use it when ethtool triggers a
device self-test. From Andrew Lunn.
5) Start moving away from custom driver versions, use the globally
defined kernel version instead, from Leon Romanovsky.
6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin.
7) Allow hard IRQ deferral during NAPI, from Eric Dumazet.
8) Add sriov and vf support to hinic, from Luo bin.
9) Support Media Redundancy Protocol (MRP) in the bridging code, from
Horatiu Vultur.
10) Support netmap in the nft_nat code, from Pablo Neira Ayuso.
11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina
Dubroca. Also add ipv6 support for espintcp.
12) Lots of ReST conversions of the networking documentation, from Mauro
Carvalho Chehab.
13) Support configuration of ethtool rxnfc flows in bcmgenet driver,
from Doug Berger.
14) Allow to dump cgroup id and filter by it in inet_diag code, from
Dmitry Yakunin.
15) Add infrastructure to export netlink attribute policies to
userspace, from Johannes Berg.
16) Several optimizations to sch_fq scheduler, from Eric Dumazet.
17) Fallback to the default qdisc if qdisc init fails because otherwise
a packet scheduler init failure will make a device inoperative. From
Jesper Dangaard Brouer.
18) Several RISCV bpf jit optimizations, from Luke Nelson.
19) Correct the return type of the ->ndo_start_xmit() method in several
drivers, it's netdev_tx_t but many drivers were using
'int'. From Yunjian Wang.
20) Add an ethtool interface for PHY master/slave config, from Oleksij
Rempel.
21) Add BPF iterators, from Yonghang Song.
22) Add cable test infrastructure, including ethool interfaces, from
Andrew Lunn. Marvell PHY driver is the first to support this
facility.
23) Remove zero-length arrays all over, from Gustavo A. R. Silva.
24) Calculate and maintain an explicit frame size in XDP, from Jesper
Dangaard Brouer.
25) Add CAP_BPF, from Alexei Starovoitov.
26) Support terse dumps in the packet scheduler, from Vlad Buslov.
27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei.
28) Add devm_register_netdev(), from Bartosz Golaszewski.
29) Minimize qdisc resets, from Cong Wang.
30) Get rid of kernel_getsockopt and kernel_setsockopt in order to
eliminate set_fs/get_fs calls. From Christoph Hellwig.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits)
selftests: net: ip_defrag: ignore EPERM
net_failover: fixed rollback in net_failover_open()
Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv"
Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv"
vmxnet3: allow rx flow hash ops only when rss is enabled
hinic: add set_channels ethtool_ops support
selftests/bpf: Add a default $(CXX) value
tools/bpf: Don't use $(COMPILE.c)
bpf, selftests: Use bpf_probe_read_kernel
s390/bpf: Use bcr 0,%0 as tail call nop filler
s390/bpf: Maintain 8-byte stack alignment
selftests/bpf: Fix verifier test
selftests/bpf: Fix sample_cnt shared between two threads
bpf, selftests: Adapt cls_redirect to call csum_level helper
bpf: Add csum_level helper for fixing up csum levels
bpf: Fix up bpf_skb_adjust_room helper's skb csum setting
sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf()
crypto/chtls: IPv6 support for inline TLS
Crypto/chcr: Fixes a coccinile check error
Crypto/chcr: Fixes compilations warnings
...
Currently, modpost reads extra symbol dump files in the reverse order.
If '-e foo -e bar' is given, modpost reads bar, foo, in this order.
This is probably not a big deal, but there is no good reason to reverse
the order. Read files in the given order.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Use sym_get_data_by_offset() helper to get access to the .shstrtab
section data. No functional change is intended because
elf->sechdrs[elf->secindex_strings].sh_addr is 0 for both ET_REL
and ET_EXEC object types.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This may not be a practical problem, but the second pass of ARCH=i386
modpost causes segmentation fault if the -s option is not passed.
MODPOST 12 modules
Segmentation fault (core dumped)
make[2]: *** [scripts/Makefile.modpost:94: __modpost] Error 139
make[1]: *** [Makefile:1339: modules] Error 2
make[1]: *** Waiting for unfinished jobs....
The segmentation fault occurs when section_rel() is called for vmlinux,
which is untested in regular builds. The cause of the problem is
reloc_location() returning a wrong pointer for ET_EXEC object type.
In this case, you need to subtract sechdr->sh_addr, otherwise it would
get access beyond the mmap'ed memory.
Add sym_get_data_by_offset() helper to avoid code duplication.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
sizeof(flexible-array-member) triggers a warning because flexible array
members have incomplete type[1]. There are some instances of code in
which the sizeof operator is being incorrectly/erroneously applied to
zero-length arrays and the result is zero. Such instances may be hiding
some bugs. So, this work (flexible-array member conversions) will also
help to get completely rid of those sorts of issues.
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Some code pathes, especially the low level entry code, must be protected
against instrumentation for various reasons:
- Low level entry code can be a fragile beast, especially on x86.
- With NO_HZ_FULL RCU state needs to be established before using it.
Having a dedicated section for such code allows to validate with tooling
that no unsafe functions are invoked.
Add the .noinstr.text section and the noinstr attribute to mark
functions. noinstr implies notrace. Kprobes will gain a section check
later.
Provide also a set of markers: instrumentation_begin()/end()
These are used to mark code inside a noinstr function which calls
into regular instrumentable text section as safe.
The instrumentation markers are only active when CONFIG_DEBUG_ENTRY is
enabled as the end marker emits a NOP to prevent the compiler from merging
the annotation points. This means the objtool verification requires a
kernel compiled with this option.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200505134100.075416272@linutronix.de
VERMAGIC* definitions are not supposed to be used by the drivers,
see this [1] bug report, so introduce special define to guard inclusion
of this header file and define it in kernel/modules.h and in internal
script that generates *.mod.c files.
In-tree module build:
➜ kernel git:(vermagic) ✗ make clean
➜ kernel git:(vermagic) ✗ make M=drivers/infiniband/hw/mlx5
➜ kernel git:(vermagic) ✗ modinfo drivers/infiniband/hw/mlx5/mlx5_ib.ko
filename: /images/leonro/src/kernel/drivers/infiniband/hw/mlx5/mlx5_ib.ko
<...>
vermagic: 5.6.0+ SMP mod_unload modversions
Out-of-tree module build:
➜ mlx5 make -C /images/leonro/src/kernel clean M=/tmp/mlx5
➜ mlx5 make -C /images/leonro/src/kernel M=/tmp/mlx5
➜ mlx5 modinfo /tmp/mlx5/mlx5_ib.ko
filename: /tmp/mlx5/mlx5_ib.ko
<...>
vermagic: 5.6.0+ SMP mod_unload modversions
[1] https://lore.kernel.org/lkml/20200411155623.GA22175@zn.tnic
Reported-by: Borislav Petkov <bp@suse.de>
Acked-by: Borislav Petkov <bp@suse.de>
Acked-by: Jessica Yu <jeyu@kernel.org>
Co-developed-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Here is the big set of char/misc/other driver patches for 5.7-rc1.
Lots of things in here, and it's later than expected due to some reverts
to resolve some reported issues. All is now clean with no reported
problems in linux-next.
Included in here is:
- interconnect updates
- mei driver updates
- uio updates
- nvmem driver updates
- soundwire updates
- binderfs updates
- coresight updates
- habanalabs updates
- mhi new bus type and core
- extcon driver updates
- some Kconfig cleanups
- other small misc driver cleanups and updates
As mentioned, all have been in linux-next for a while, and with the last
two reverts, all is calm and good.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXodfvA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynzCQCfROhar3E8EhYEqSOP6xq6uhX9uegAnRgGY2rs
rN4JJpOcTddvZcVlD+vo
=ocWk
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big set of char/misc/other driver patches for 5.7-rc1.
Lots of things in here, and it's later than expected due to some
reverts to resolve some reported issues. All is now clean with no
reported problems in linux-next.
Included in here is:
- interconnect updates
- mei driver updates
- uio updates
- nvmem driver updates
- soundwire updates
- binderfs updates
- coresight updates
- habanalabs updates
- mhi new bus type and core
- extcon driver updates
- some Kconfig cleanups
- other small misc driver cleanups and updates
As mentioned, all have been in linux-next for a while, and with the
last two reverts, all is calm and good"
* tag 'char-misc-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (174 commits)
Revert "driver core: platform: Initialize dma_parms for platform devices"
Revert "amba: Initialize dma_parms for amba devices"
amba: Initialize dma_parms for amba devices
driver core: platform: Initialize dma_parms for platform devices
bus: mhi: core: Drop the references to mhi_dev in mhi_destroy_device()
bus: mhi: core: Initialize bhie field in mhi_cntrl for RDDM capture
bus: mhi: core: Add support for reading MHI info from device
misc: rtsx: set correct pcr_ops for rts522A
speakup: misc: Use dynamic minor numbers for speakup devices
mei: me: add cedar fork device ids
coresight: do not use the BIT() macro in the UAPI header
Documentation: provide IBM contacts for embargoed hardware
nvmem: core: remove nvmem_sysfs_get_groups()
nvmem: core: use is_bin_visible for permissions
nvmem: core: use device_register and device_unregister
nvmem: core: add root_only member to nvmem device struct
extcon: axp288: Add wakeup support
extcon: Mark extcon_get_edev_name() function as exported symbol
extcon: palmas: Hide error messages if gpio returns -EPROBE_DEFER
dt-bindings: extcon: usbc-cros-ec: convert extcon-usbc-cros-ec.txt to yaml format
...
Here are 3 SPDX patches for 5.7-rc1.
One fixes up the SPDX tag for a single driver, while the other two go
through the tree and add SPDX tags for all of the .gitignore files as
needed.
Nothing too complex, but you will get a merge conflict with your current
tree, that should be trivial to handle (one file modified by two things,
one file deleted.)
All 3 of these have been in linux-next for a while, with no reported
issues other than the merge conflict.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXodg5A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykySQCgy9YDrkz7nWq6v3Gohl6+lW/L+rMAnRM4uTZm
m5AuCzO3Azt9KBi7NL+L
=2Lm5
-----END PGP SIGNATURE-----
Merge tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull SPDX updates from Greg KH:
"Here are three SPDX patches for 5.7-rc1.
One fixes up the SPDX tag for a single driver, while the other two go
through the tree and add SPDX tags for all of the .gitignore files as
needed.
Nothing too complex, but you will get a merge conflict with your
current tree, that should be trivial to handle (one file modified by
two things, one file deleted.)
All three of these have been in linux-next for a while, with no
reported issues other than the merge conflict"
* tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx:
ASoC: MT6660: make spdxcheck.py happy
.gitignore: add SPDX License Identifier
.gitignore: remove too obvious comments
[Build system]
- add CONFIG_UNUSED_KSYMS_WHITELIST, which will be useful to define
a fixed set of export symbols for Generic Kernel Image (GKI)
- allow to run 'make dt_binding_check' without .config
- use full schema for checking DT examples in *.yaml files
- make modpost fail for missing MODULE_IMPORT_NS(), which makes more
sense because we know the produced modules are never loadable
- Remove unused 'AS' variable
[Kconfig]
- sanitize DEFCONFIG_LIST, and remove ARCH_DEFCONFIG from Kconfig files
- relax the 'imply' behavior so that symbols implied by y can become m
- make 'imply' obey 'depends on' in order to make 'imply' really weak
[Misc]
- add documentation on building the kernel with Clang/LLVM
- revive __HAVE_ARCH_STRLEN for 32bit sparc to use optimized strlen()
- fix warning from deb-pkg builds when CONFIG_DEBUG_INFO=n
- various script and Makefile cleanups
-----BEGIN PGP SIGNATURE-----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=wT8A
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
"Build system:
- add CONFIG_UNUSED_KSYMS_WHITELIST, which will be useful to define a
fixed set of export symbols for Generic Kernel Image (GKI)
- allow to run 'make dt_binding_check' without .config
- use full schema for checking DT examples in *.yaml files
- make modpost fail for missing MODULE_IMPORT_NS(), which makes more
sense because we know the produced modules are never loadable
- Remove unused 'AS' variable
Kconfig:
- sanitize DEFCONFIG_LIST, and remove ARCH_DEFCONFIG from Kconfig
files
- relax the 'imply' behavior so that symbols implied by 'y' can
become 'm'
- make 'imply' obey 'depends on' in order to make 'imply' really weak
Misc:
- add documentation on building the kernel with Clang/LLVM
- revive __HAVE_ARCH_STRLEN for 32bit sparc to use optimized strlen()
- fix warning from deb-pkg builds when CONFIG_DEBUG_INFO=n
- various script and Makefile cleanups"
* tag 'kbuild-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits)
Makefile: Update kselftest help information
kbuild: deb-pkg: fix warning when CONFIG_DEBUG_INFO is unset
kbuild: add outputmakefile to no-dot-config-targets
kbuild: remove AS variable
net: wan: wanxl: refactor the firmware rebuild rule
net: wan: wanxl: use $(M68KCC) instead of $(M68KAS) for rebuilding firmware
net: wan: wanxl: use allow to pass CROSS_COMPILE_M68k for rebuilding firmware
kbuild: add comment about grouped target
kbuild: add -Wall to KBUILD_HOSTCXXFLAGS
kconfig: remove unused variable in qconf.cc
sparc: revive __HAVE_ARCH_STRLEN for 32bit sparc
kbuild: refactor Makefile.dtbinst more
kbuild: compute the dtbs_install destination more simply
Makefile: disallow data races on gcc-10 as well
kconfig: make 'imply' obey the direct dependency
kconfig: allow symbols implied by y to become m
net: drop_monitor: use IS_REACHABLE() to guard net_dm_hw_report()
modpost: return error if module is missing ns imports and MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS=n
modpost: rework and consolidate logging interface
kbuild: allow to run dt_binding_check without kernel configuration
...
Core:
- Consolidation of the vDSO build infrastructure to address the
difficulties of cross-builds for ARM64 compat vDSO libraries by
restricting the exposure of header content to the vDSO build.
This is achieved by splitting out header content into separate
headers. which contain only the minimaly required information which is
necessary to build the vDSO. These new headers are included from the
kernel headers and the vDSO specific files.
- Enhancements to the generic vDSO library allowing more fine grained
control over the compiled in code, further reducing architecture
specific storage and preparing for adopting the generic library by PPC.
- Cleanup and consolidation of the exit related code in posix CPU timers.
- Small cleanups and enhancements here and there
Drivers:
- The obligatory new drivers: Ingenic JZ47xx and X1000 TCU support
- Correct the clock rate of PIT64b global clock
- setup_irq() cleanup
- Preparation for PWM and suspend support for the TI DM timer
- Expand the fttmr010 driver to support ast2600 systems
- The usual small fixes, enhancements and cleanups all over the place
-----BEGIN PGP SIGNATURE-----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=5o9G
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timekeeping and timer updates from Thomas Gleixner:
"Core:
- Consolidation of the vDSO build infrastructure to address the
difficulties of cross-builds for ARM64 compat vDSO libraries by
restricting the exposure of header content to the vDSO build.
This is achieved by splitting out header content into separate
headers. which contain only the minimaly required information which
is necessary to build the vDSO. These new headers are included from
the kernel headers and the vDSO specific files.
- Enhancements to the generic vDSO library allowing more fine grained
control over the compiled in code, further reducing architecture
specific storage and preparing for adopting the generic library by
PPC.
- Cleanup and consolidation of the exit related code in posix CPU
timers.
- Small cleanups and enhancements here and there
Drivers:
- The obligatory new drivers: Ingenic JZ47xx and X1000 TCU support
- Correct the clock rate of PIT64b global clock
- setup_irq() cleanup
- Preparation for PWM and suspend support for the TI DM timer
- Expand the fttmr010 driver to support ast2600 systems
- The usual small fixes, enhancements and cleanups all over the
place"
* tag 'timers-core-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (80 commits)
Revert "clocksource/drivers/timer-probe: Avoid creating dead devices"
vdso: Fix clocksource.h macro detection
um: Fix header inclusion
arm64: vdso32: Enable Clang Compilation
lib/vdso: Enable common headers
arm: vdso: Enable arm to use common headers
x86/vdso: Enable x86 to use common headers
mips: vdso: Enable mips to use common headers
arm64: vdso32: Include common headers in the vdso library
arm64: vdso: Include common headers in the vdso library
arm64: Introduce asm/vdso/processor.h
arm64: vdso32: Code clean up
linux/elfnote.h: Replace elf.h with UAPI equivalent
scripts: Fix the inclusion order in modpost
common: Introduce processor.h
linux/ktime.h: Extract common header for vDSO
linux/jiffies.h: Extract common header for vDSO
linux/time64.h: Extract common header for vDSO
linux/time32.h: Extract common header for vDSO
linux/time.h: Extract common header for vDSO
...
