Since the burst check conditions have moved out of the function
mptcp_subflow_get_send(), it makes all msk->last_snd useless.
This patch drops them as well as the macro MPTCP_RESET_SCHEDULER.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20230821-upstream-net-next-20230818-v1-2-0c860fb256a8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To support redundant package schedulers more easily, this patch refactors
__mptcp_push_pending() logic from:
For each dfrag:
While sends succeed:
Call the scheduler (selects subflow and msk->snd_burst)
Update subflow locks (push/release/acquire as needed)
Send the dfrag data with mptcp_sendmsg_frag()
Update already_sent, snd_nxt, snd_burst
Update msk->first_pending
Push/release on final subflow
->
While first_pending isn't empty:
Call the scheduler (selects subflow and msk->snd_burst)
Update subflow locks (push/release/acquire as needed)
For each pending dfrag:
While sends succeed:
Send the dfrag data with mptcp_sendmsg_frag()
Update already_sent, snd_nxt, snd_burst
Update msk->first_pending
Break if required by msk->snd_burst / etc
Push/release on final subflow
Refactors __mptcp_subflow_push_pending logic from:
For each dfrag:
While sends succeed:
Call the scheduler (selects subflow and msk->snd_burst)
Send the dfrag data with mptcp_subflow_delegate(), break
Send the dfrag data with mptcp_sendmsg_frag()
Update dfrag->already_sent, msk->snd_nxt, msk->snd_burst
Update msk->first_pending
->
While first_pending isn't empty:
Call the scheduler (selects subflow and msk->snd_burst)
Send the dfrag data with mptcp_subflow_delegate(), break
Send the dfrag data with mptcp_sendmsg_frag()
For each pending dfrag:
While sends succeed:
Send the dfrag data with mptcp_sendmsg_frag()
Update already_sent, snd_nxt, snd_burst
Update msk->first_pending
Break if required by msk->snd_burst / etc
Move the duplicate code from __mptcp_push_pending() and
__mptcp_subflow_push_pending() into a new helper function, named
__subflow_push_pending(). Simplify __mptcp_push_pending() and
__mptcp_subflow_push_pending() by invoking this helper.
Also move the burst check conditions out of the function
mptcp_subflow_get_send(), check them in __subflow_push_pending() in
the inner "for each pending dfrag" loop.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20230821-upstream-net-next-20230818-v1-1-0c860fb256a8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
1) aRFS ethtool stats
Improve aRFS observability by adding new set of counters. Each Rx
ring will have this set of counters listed below.
These counters are exposed through ethtool -S.
1.1) arfs_add: number of times a new rule has been created.
1.2) arfs_request_in: number of times a rule was requested to move from
its current Rx ring to a new Rx ring (incremented on the destination
Rx ring).
1.3) arfs_request_out: number of times a rule was requested to move out
from its current Rx ring (incremented on source/current Rx ring).
1.4) arfs_expired: number of times a rule has been expired by the
kernel and removed from HW.
1.5) arfs_err: number of times a rule creation or modification has
failed.
2) Supporting inline WQE when possible in SW steering
3) Misc cleanups and fixups to net-next branch
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmTjpQUACgkQSD+KveBX
+j5o5ggAtapFYgHRQKC7gZOcAs1oKHUWij4vfN0/TGk0EY8jvIPQaYm/OI/P6dc1
/6ENMKwyc5UmYuFHpdmYtdmS9hd2yjB7CGv0oSLwtYPXSeUK3/gJj6RU/KoA8oA4
Qhv7rxPl7ZBa1TQEw7DqIUKFJdaN78vQiNLPU96veKgoHohbhqO+2pOGpZtDhzjg
2jSvVJ213rgfT1ZuUiGeMviAhIrKZ0t5vvKxJtST72UrWOyDZdlPUdb7/kjfoDJO
ZkOTKZyNySYjtknhBdiR6a0CzP63wvkRLbtqE4HyUh38GpnNLB7Fgij22d5c14+1
9IRYIVSGQti5mcp/IXcpYU58+7g1ag==
=ecFF
-----END PGP SIGNATURE-----
Merge tag 'mlx5-updates-2023-08-16' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2023-08-16
1) aRFS ethtool stats
Improve aRFS observability by adding new set of counters. Each Rx
ring will have this set of counters listed below.
These counters are exposed through ethtool -S.
1.1) arfs_add: number of times a new rule has been created.
1.2) arfs_request_in: number of times a rule was requested to move from
its current Rx ring to a new Rx ring (incremented on the destination
Rx ring).
1.3) arfs_request_out: number of times a rule was requested to move out
from its current Rx ring (incremented on source/current Rx ring).
1.4) arfs_expired: number of times a rule has been expired by the
kernel and removed from HW.
1.5) arfs_err: number of times a rule creation or modification has
failed.
2) Supporting inline WQE when possible in SW steering
3) Misc cleanups and fixups to net-next branch
* tag 'mlx5-updates-2023-08-16' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5: Devcom, only use devcom after NULL check in mlx5_devcom_send_event()
net/mlx5: DR, Supporting inline WQE when possible
net/mlx5: Rename devlink port ops struct for PFs/VFs
net/mlx5: Remove VPORT_UPLINK handling from devlink_port.c
net/mlx5: Call mlx5_esw_offloads_rep_load/unload() for uplink port directly
net/mlx5: Update dead links in Kconfig documentation
net/mlx5: Remove health syndrome enum duplication
net/mlx5: DR, Remove unneeded local variable
net/mlx5: DR, Fix code indentation
net/mlx5: IRQ, consolidate irq and affinity mask allocation
net/mlx5e: Fix spelling mistake "Faided" -> "Failed"
net/mlx5e: aRFS, Introduce ethtool stats
net/mlx5e: aRFS, Warn if aRFS table does not exist for aRFS rule
net/mlx5e: aRFS, Prevent repeated kernel rule migrations requests
====================
Link: https://lore.kernel.org/r/20230821175739.81188-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
dev_queue_xmit_nit() already uses rcu_read_lock() / rcu_read_unlock()
and nothing suggests that softIRQs should be disabled around it.
Therefore, remove the rcu_read_lock_bh() / rcu_read_unlock_bh()
surrounding it.
Tested using [1] with lockdep enabled.
[1]
#!/bin/bash
ip link add name vrf1 up type vrf table 100
ip link add name veth0 type veth peer name veth1
ip link set dev veth1 master vrf1
ip link set dev veth0 up
ip link set dev veth1 up
ip address add 192.0.2.1/24 dev veth0
ip address add 192.0.2.2/24 dev veth1
ip rule add pref 32765 table local
ip rule del pref 0
tcpdump -i vrf1 -c 20 -w /dev/null &
sleep 10
ping -i 0.1 -c 10 -q 192.0.2.2
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230821142339.1889961-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The function is not called from an atomic context so use GFP_KERNEL
instead of GFP_ATOMIC. The allocation of the per-CPU stats is already
performed with GFP_KERNEL.
Tested using test_vxlan_vnifiltering.sh with CONFIG_DEBUG_ATOMIC_SLEEP.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230821141923.1889776-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 264a9c5c9d ("net: sparx5: Remove unused GLAG handling in PGID")
removed sparx5_pgid_alloc_glag() but not its declaration.
Commit 27d293ccee ("net: microchip: sparx5: Add support for rule count by cookie")
removed vcap_rule_iter() but not its declaration.
Commit 8beef08f46 ("net: microchip: sparx5: Adding initial VCAP API support")
declared but never implemented vcap_api_set_client().
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230821135556.43224-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit fbfb803153 ("ionic: Add hardware init and device commands")
declared but never implemented ionic_q_rewind()/ionic_set_dma_mask().
Commit 969f843946 ("ionic: sync the filters in the work task")
declared but never implemented ionic_rx_filters_need_sync().
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Acked-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://lore.kernel.org/r/20230821134717.51936-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 91a98917a8 ("net: dsa: microchip: move switch chip_id detection to ksz_common")
removed ksz8_switch_detect() but not its declaration.
Commit 6ec23aaaac ("net: dsa: microchip: move ksz_dev_ops to ksz_common.c")
declared but never implemented other functions.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20230821125501.19624-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Andrew reported a bonding issue that if we put an active-back bond on top
of a 802.3ad bond interface. When the 802.3ad bond's speed/duplex changed
dynamically. The upper bonding interface's speed/duplex can't be changed at
the same time, which will show incorrect speed.
Fix it by updating the port speed when calling ethtool.
Reported-by: Andrew Schorr <ajschorr@alumni.princeton.edu>
Closes: https://lore.kernel.org/netdev/ZEt3hvyREPVdbesO@Laptop-X1/
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Link: https://lore.kernel.org/r/20230821101008.797482-1-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When the ifdown function in the dst_ops structure is referenced, the input
parameter 'how' is always true. In the current implementation of the
ifdown interface, ip6_dst_ifdown does not use the input parameter 'how',
xfrm6_dst_ifdown and xfrm4_dst_ifdown functions use the input parameter
'unregister'. But false judgment on 'unregister' in xfrm6_dst_ifdown and
xfrm4_dst_ifdown is false, so remove the input parameter 'how' in ifdown
function.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230821084104.3812233-1-shaozhengchao@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The following message shows up when compiling with W=1:
In function ‘fortify_memcpy_chk’,
inlined from ‘alx_get_ethtool_stats’ at drivers/net/ethernet/atheros/alx/ethtool.c:297:2:
./include/linux/fortify-string.h:592:4: error: call to ‘__read_overflow2_field’
declared with attribute warning: detected read beyond size of field (2nd parameter);
maybe use struct_group()? [-Werror=attribute-warning]
592 | __read_overflow2_field(q_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In order to get alx stats altogether, alx_get_ethtool_stats() reads
beyond hw->stats.rx_ok. Fix this warning by directly copying hw->stats,
and refactor the unnecessarily complicated BUILD_BUG_ON btw.
Signed-off-by: GONG, Ruiqi <gongruiqi1@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230821013218.1614265-1-gongruiqi@huaweicloud.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When switching from 10GBase-R/5GBase-R/USXGMII to one of the interface
modes provided by mtk-pcs-lynxi we need to make sure to always perform
a full configuration of the PHYA.
Implement pcs_disable op which resets the stored interface mode to
PHY_INTERFACE_MODE_NA to trigger a full reconfiguration once the LynxI
PCS driver had previously been deselected in favor of another PCS
driver such as the to-be-added driver for the USXGMII PCS found in
MT7988.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/f23d1a60d2c9d2fb72e32dcb0eaa5f7e867a3d68.1692327891.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is a warning reported by kernel test robot:
smatch warnings:
drivers/net/ethernet/mellanox/mlx5/core/lib/devcom.c:264
mlx5_devcom_send_event() warn: variable dereferenced before
IS_ERR check devcom (see line 259)
The reason for the warning is that the pointer is used before check, put
the assignment to comp after devcom check to silence the warning.
Fixes: 88d162b479 ("net/mlx5: Devcom, Infrastructure changes")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/202308041028.AkXYDwJ6-lkp@intel.com/
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
In WQE (Work Queue Entry), the two types of data segments memories are
pointers and inline data, where inline data is passed directly as
part of the WQE.
For software steering, the maximal inline size should be less than
2*MLX5_SEND_WQE_BB, i.e., the potential data must fit with the required
inline WQE headers.
Two consecutive blocks (MLX5_SEND_WQE_BB) are not guaranteed to reside
on the same memory page. Hence, writes to MLX5_SEND_WQE_BB should be
done separately, i.e., each MLX5_SEND_WQE_BB should be obtained using
the mlx5_wq_cyc_get_wqe macro.
Signed-off-by: Itamar Gozlan <igozlan@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
As this struct is only used for devlink ports created for PF/VF,
add it to the name of the variable to distinguish from the SF related
ops struct.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
It is not possible that the functions in devlink_port.c are called for
uplink port. Remove this leftover code.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
For uplink port, mlx5_esw_offloads_load/unload_rep() are currently
called. There are 2 check inside, which effectively make the
functions a simple wrappers of mlx5_esw_offloads_rep_load/unload()
for uplink port. So avoid one check and indirection and call
mlx5_esw_offloads_rep_load/unload() for uplink port directly.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Point to NVIDIA documentation for device specific information now that the
Mellanox documentation site is deprecated. Refer to kernel documentation
sources for generic information not specific to mlx5 devices.
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Health syndrome enum values were duplicated in mlx5_ifc and health.c,
the correct place for them is mlx5_ifc.
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Remove local variable that is already defined outside of
the scope of this block.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Consolidate the mlx5_irq and mlx5_irq->mask allocation, to simplify
error flows and to match the dealloctation sequence @irq_release for
symmetry.
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
There is a spelling mistake in a warning message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Improve aRFS observability by adding new set of counters. Each Rx
ring will have this set of counters listed below.
These counters are exposed through ethtool -S.
1) arfs_add: number of times a new rule has been created.
2) arfs_request_in: number of times a rule was requested to move from
its current Rx ring to a new Rx ring (incremented on the destination
Rx ring).
3) arfs_request_out: number of times a rule was requested to move out
from its current Rx ring (incremented on source/current Rx ring).
4) arfs_expired: number of times a rule has been expired by the
kernel and removed from HW.
5) arfs_err: number of times a rule creation or modification has
failed.
This patch removes rx[i]_xsk_arfs_err counter and its documentation in
mlx5/counters.rst since aRFS activity does not occur in XSK RQ's.
Signed-off-by: Adham Faris <afaris@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
aRFS tables should be allocated and exist in advance. Driver shouldn't
reach a point where it tries to add aRFS rule to table that does not
exist.
Add warning if driver encounters such situation.
Signed-off-by: Adham Faris <afaris@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
aRFS rule movement requests from one Rx ring to other Rx ring arrive
from the kernel to ensure that packets are steered to the right Rx ring.
In the time interval until satisfying such a request, several more
requests might follow, for the same flow.
This patch detects and prevents repeated aRFS rules movement requests.
In mlx5e_rx_flow_steer() ndo, after finding the aRFS rule that have been
requested to move by the kernel, check if it's already requested to move
by calling work_busy(&arfs_rule->arfs_work) handler. IOW, if this
request is pending to be executed (in the work queue) or it's executing
now but hasn't finished yet, return current filter ID and don't issue a
new transition work.
Signed-off-by: Adham Faris <afaris@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Fix some kernel-doc comments to silence the warnings:
drivers/net/ethernet/amd/pds_core/auxbus.c:18: warning: Function parameter or member 'pf' not described in 'pds_client_register'
drivers/net/ethernet/amd/pds_core/auxbus.c:18: warning: Excess function parameter 'pf_pdev' description in 'pds_client_register'
drivers/net/ethernet/amd/pds_core/auxbus.c:58: warning: Function parameter or member 'pf' not described in 'pds_client_unregister'
drivers/net/ethernet/amd/pds_core/auxbus.c:58: warning: Excess function parameter 'pf_pdev' description in 'pds_client_unregister'
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
sk_getsockopt() runs locklessly. This means sk->sk_lingertime
can be read while other threads are changing its value.
Other reads also happen without socket lock being held,
and must be annotated.
Remove preprocessor logic using BITS_PER_LONG, compilers
are smart enough to figure this by themselves.
v2: fixed a clang W=1 (-Wtautological-constant-out-of-range-compare) warning
(Jakub)
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add extack info for IPv4 address add/delete, which would be useful for
users to understand the problem without having to read kernel code.
No extack message for the ifa_local checking in __inet_insert_ifa() as
it has been checked in find_matching_ifa().
Suggested-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
1. XGMAC Core does not have hash_filter definition, it uses
vlhash(VLAN Hash Filtering) instead, skip hash_filter when XGMAC.
2. Show exact size of Hash Table instead of raw register value.
3. Show full description of safety features defined by Synopsys Databook.
4. When safety feature is configured with no parity, or ECC only,
keep FSM Parity Checking disabled.
Signed-off-by: Furong Xu <0x1207@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hangbin Liu says:
====================
ipv6: update route when delete source address
Currently, when remove an address, the IPv6 route will not remove the
prefer source address when the address is bond to other device. Fix this
issue and add related tests as Ido and David suggested.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a test case for IPv6 source address delete.
As David suggested, add tests:
- Single device using src address
- Two devices with the same source address
- VRF with single device using src address
- VRF with two devices using src address
As Ido points out, in IPv6, the preferred source address is looked up in
the same VRF as the first nexthop device. This will give us similar results
to IPv4 if the route is installed in the same VRF as the nexthop device, but
not when the nexthop device is enslaved to a different VRF. So add tests:
- src address and nexthop dev in same VR
- src address and nexthop device in different VRF
The link local address delete logic is different from the global address.
It should only affect the associate device it bonds to. So add tests cases
for link local address testing.
Here is the test result:
IPv6 delete address route tests
Single device using src address
TEST: Prefsrc removed when src address removed on other device [ OK ]
Two devices with the same source address
TEST: Prefsrc not removed when src address exist on other device [ OK ]
TEST: Prefsrc removed when src address removed on all devices [ OK ]
VRF with single device using src address
TEST: Prefsrc removed when src address removed on other device [ OK ]
VRF with two devices using src address
TEST: Prefsrc not removed when src address exist on other device [ OK ]
TEST: Prefsrc removed when src address removed on all devices [ OK ]
src address and nexthop dev in same VRF
TEST: Prefsrc removed from VRF when source address deleted [ OK ]
TEST: Prefsrc in default VRF not removed [ OK ]
TEST: Prefsrc not removed from VRF when source address exist [ OK ]
TEST: Prefsrc in default VRF removed [ OK ]
src address and nexthop device in different VRF
TEST: Prefsrc not removed from VRF when nexthop dev in diff VRF [ OK ]
TEST: Prefsrc not removed in default VRF [ OK ]
TEST: Prefsrc removed from VRF when nexthop dev in diff VRF [ OK ]
TEST: Prefsrc removed in default VRF [ OK ]
Table ID 0
TEST: Prefsrc removed from default VRF when source address deleted [ OK ]
Link local source route
TEST: Prefsrc not removed when delete ll addr from other dev [ OK ]
TEST: Prefsrc removed when delete ll addr [ OK ]
TEST: Prefsrc not removed when delete ll addr from other dev [ OK ]
TEST: Prefsrc removed even ll addr still exist on other dev [ OK ]
Tests passed: 19
Tests failed: 0
Suggested-by: Ido Schimmel <idosch@idosch.org>
Suggested-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After deleting an IPv6 address on an interface and cleaning up the
related preferred source entries, it is important to ensure that all
routes associated with the deleted address are properly cleared. The
current implementation of rt6_remove_prefsrc() only checks the preferred
source addresses bound to the current device. However, there may be
routes that are bound to other devices but still utilize the same
preferred source address.
To address this issue, it is necessary to also delete entries that are
bound to other interfaces but share the same source address with the
current device. Failure to delete these entries would leave routes that
are bound to the deleted address unclear. Here is an example reproducer
(I have omitted unrelated routes):
+ ip link add dummy1 type dummy
+ ip link add dummy2 type dummy
+ ip link set dummy1 up
+ ip link set dummy2 up
+ ip addr add 1:2:3:4::5/64 dev dummy1
+ ip route add 7:7:7:0::1 dev dummy1 src 1:2:3:4::5
+ ip route add 7:7:7:0::2 dev dummy2 src 1:2:3:4::5
+ ip -6 route show
1:2:3:4::/64 dev dummy1 proto kernel metric 256 pref medium
7:7:7::1 dev dummy1 src 1:2:3:4::5 metric 1024 pref medium
7:7:7::2 dev dummy2 src 1:2:3:4::5 metric 1024 pref medium
+ ip addr del 1:2:3:4::5/64 dev dummy1
+ ip -6 route show
7:7:7::1 dev dummy1 metric 1024 pref medium
7:7:7::2 dev dummy2 src 1:2:3:4::5 metric 1024 pref medium
As Ido reminds, in IPv6, the preferred source address is looked up in
the same VRF as the first nexthop device, which is different with IPv4.
So, while removing the device checking, we also need to add an
ipv6_chk_addr() check to make sure the address does not exist on the other
devices of the rt nexthop device's VRF.
After fix:
+ ip addr del 1:2:3:4::5/64 dev dummy1
+ ip -6 route show
7:7:7::1 dev dummy1 metric 1024 pref medium
7:7:7::2 dev dummy2 metric 1024 pref medium
Reported-by: Thomas Haller <thaller@redhat.com>
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2170513
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
As the initial commit 1a01727676 ("selftests: Add VRF route leaking
tests") said, the IPv6 MTU test fails as source address selection
picking ::1. Every time we run the selftest this one report failed.
There seems not much meaning to keep reporting a failure for 3 years
that no one plan to fix/update. Let't just skip this one first. We can
add it back when the issue fixed.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
addrconf_prefix_rcv returned early without releasing the inet6_dev
pointer when the PIO lifetime is less than accept_ra_min_lft.
Fixes: 5027d54a9c ("net: change accept_ra_min_rtr_lft to affect all RA lifetimes")
Cc: Maciej Żenczykowski <maze@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Cc: David Ahern <dsahern@kernel.org>
Cc: Simon Horman <horms@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: Patrick Rohr <prohr@google.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Setting IP_RECVERR and IPV6_RECVERR options to zero currently
purges the socket error queue, which was probably not expected
for zerocopy and tx_timestamp users.
I discovered this issue while preparing commit 6b5f43ea08
("inet: move inet->recverr to inet->inet_flags"), I presume this
change does not need to be backported to stable kernels.
Add skb_errqueue_purge() helper to purge error messages only.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ruan Jinjie says:
====================
net: Return PTR_ERR() for fixed_phy_register()
fixed_phy_register() returns not only -EIO or -ENODEV, but also
-EPROBE_DEFER, -EINVAL and -EBUSY. The Best practice is to return these
error codes with PTR_ERR().
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
fixed_phy_register() returns -EPROBE_DEFER, -EINVAL and -EBUSY,
etc, in addition to -EIO. The Best practice is to return these
error codes with PTR_ERR().
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
fixed_phy_register() returns -EPROBE_DEFER, -EINVAL and -EBUSY,
etc, in addition to -ENODEV. The Best practice is to return these
error codes with PTR_ERR().
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Acked-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
fixed_phy_register() returns -EPROBE_DEFER, -EINVAL and -EBUSY,
etc, in addition to -ENODEV. The best practice is to return
these error codes with PTR_ERR().
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
The user ports use RSGMII, but we don't have that, and DT doesn't
specify a phy interface mode, so phylib defaults to GMII. These support
1G, 100M and 10M with flow control. It is unknown whether asymetric
pause is supported at all speeds.
The CPU port uses MII/GMII/RGMII/REVMII by hardware pin strapping,
and support speeds specific to each, with full duplex only supported
in some modes. Flow control may be supported again by hardware pin
strapping, and theoretically is readable through a register but no
information is given in the datasheet for that.
So, we do a best efforts - and be lenient.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ruan Jinjie says:
====================
net: Update and fix return value check for vcap_get_rule()
As Simon Horman suggests, update vcap_get_rule() to always
return an ERR_PTR() and update the error detection conditions to
use IS_ERR(), which would be more cleaner.
So se IS_ERR() to update the return value and fix the issue
in lan966x_ptp_add_trap().
Changes in v2:
- Update vcap_get_rule() to always return an ERR_PTR().
- Update the return value fix in lan966x_ptp_add_trap().
- Update the return value check in sparx5_tc_free_rule_resources().
====================
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
As Simon Horman suggests, update vcap_get_rule() to always
return an ERR_PTR() and update the error detection conditions to
use IS_ERR(), so use IS_ERR() to check the return value.
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Suggested-by: Simon Horman <horms@kernel.org>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As Simon Horman suggests, update vcap_get_rule() to always
return an ERR_PTR() and update the error detection conditions to
use IS_ERR(), so use IS_ERR() to fix the return value issue.
Fixes: 72df3489fb ("net: lan966x: Add ptp trap rules")
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Suggested-by: Simon Horman <horms@kernel.org>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As Simon Horman suggests, update vcap_get_rule() to always
return an ERR_PTR() and update the error detection conditions to
use IS_ERR(), which would be more cleaner in this case.
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Suggested-by: Simon Horman <horms@kernel.org>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
xgene_mdio_status is declared static, and is only written once by the
driver. It appears to have been this way since the driver was first
added to the kernel tree. No other users can be found, so let's remove
it.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently any error during render leads to output an empty file.
That is quite annoying when using tools/net/ynl/ynl-regen.sh
which git greps files with content of "YNL-GEN.." and therefore ignores
empty files. So once you fail to regen, you have to checkout the file.
Avoid that by rendering to a temporary file first, only at the end
copy the content to the actual destination.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
