This reverts commit 8ff60eb052.
The kernel test robot reports a huge performance regression due to the
commit, and the reason seems fairly straightforward: when there is
contention on the page list (which is what causes acquire_slab() to
fail), we do _not_ want to just loop and try again, because that will
transfer the contention to the 'n->list_lock' spinlock we hold, and
just make things even worse.
This is admittedly likely a problem only on big machines - the kernel
test robot report comes from a 96-thread dual socket Intel Xeon Gold
6252 setup, but the regression there really is quite noticeable:
-47.9% regression of stress-ng.rawpkt.ops_per_sec
and the commit that was marked as being fixed (7ced371971: "slub:
Acquire_slab() avoid loop") actually did the loop exit early very
intentionally (the hint being that "avoid loop" part of that commit
message), exactly to avoid this issue.
The correct thing to do may be to pick some kind of reasonable middle
ground: instead of breaking out of the loop on the very first sign of
contention, or trying over and over and over again, the right thing may
be to re-try _once_, and then give up on the second failure (or pick
your favorite value for "once"..).
Reported-by: kernel test robot <oliver.sang@intel.com>
Link: https://lore.kernel.org/lkml/20210301080404.GF12822@xsang-OptiPlex-9020/
Cc: Jann Horn <jannh@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
For allocations from kmalloc caches, kasan_kmalloc() always follows
kasan_slab_alloc(). Currenly, both of them unpoison the whole object,
which is unnecessary.
This patch provides separate implementations for both annotations:
kasan_slab_alloc() unpoisons the whole object, and kasan_kmalloc() only
poisons the redzone.
For generic KASAN, the redzone start might not be aligned to
KASAN_GRANULE_SIZE. Therefore, the poisoning is split in two parts:
kasan_poison_last_granule() poisons the unaligned part, and then
kasan_poison() poisons the rest.
This patch also clarifies alignment guarantees of each of the poisoning
functions and drops the unnecessary round_up() call for redzone_end.
With this change, the early SLUB cache annotation needs to be changed to
kasan_slab_alloc(), as kasan_kmalloc() doesn't unpoison objects now. The
number of poisoned bytes for objects in this cache stays the same, as
kmem_cache_node->object_size is equal to sizeof(struct kmem_cache_node).
Link: https://lkml.kernel.org/r/7e3961cb52be380bc412860332063f5f7ce10d13.1612546384.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Inserts KFENCE hooks into the SLUB allocator.
To pass the originally requested size to KFENCE, add an argument
'orig_size' to slab_alloc*(). The additional argument is required to
preserve the requested original size for kmalloc() allocations, which
uses size classes (e.g. an allocation of 272 bytes will return an object
of size 512). Therefore, kmem_cache::size does not represent the
kmalloc-caller's requested size, and we must introduce the argument
'orig_size' to propagate the originally requested size to KFENCE.
Without the originally requested size, we would not be able to detect
out-of-bounds accesses for objects placed at the end of a KFENCE object
page if that object is not equal to the kmalloc-size class it was
bucketed into.
When KFENCE is disabled, there is no additional overhead, since
slab_alloc*() functions are __always_inline.
Link: https://lkml.kernel.org/r/20201103175841.3495947-6-elver@google.com
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Alexander Potapenko <glider@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Jann Horn <jannh@google.com>
Co-developed-by: Marco Elver <elver@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christopher Lameter <cl@linux.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hillf Danton <hdanton@sina.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joern Engel <joern@purestorage.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: SeongJae Park <sjpark@amazon.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Generic mm functions that call KASAN annotations that might report a bug
pass _RET_IP_ to them as an argument. This allows KASAN to include the
name of the function that called the mm function in its report's header.
Now that KASAN has inline wrappers for all of its annotations, move
_RET_IP_ to those wrappers to simplify annotation call sites.
Link: https://linux-review.googlesource.com/id/I8fb3c06d49671305ee184175a39591bc26647a67
Link: https://lkml.kernel.org/r/5c1490eddf20b436b8c4eeea83fce47687d5e4a4.1610733117.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
SLUB currently account kmalloc() and kmalloc_node() allocations larger
than order-1 page per-node. But it forget to update the per-memcg
vmstats. So it can lead to inaccurate statistics of "slab_unreclaimable"
which is from memory.stat. Fix it by using mod_lruvec_page_state instead
of mod_node_page_state.
Link: https://lkml.kernel.org/r/20210223092423.42420-1-songmuchun@bytedance.com
Fixes: 6a486c0ad4 ("mm, sl[ou]b: improve memory accounting")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In general it's unknown in advance if a slab page will contain accounted
objects or not. In order to avoid memory waste, an obj_cgroup vector is
allocated dynamically when a need to account of a new object arises. Such
approach is memory efficient, but requires an expensive cmpxchg() to set
up the memcg/objcgs pointer, because an allocation can race with a
different allocation on another cpu.
But in some common cases it's known for sure that a slab page will contain
accounted objects: if the page belongs to a slab cache with a SLAB_ACCOUNT
flag set. It includes such popular objects like vm_area_struct, anon_vma,
task_struct, etc.
In such cases we can pre-allocate the objcgs vector and simple assign it
to the page without any atomic operations, because at this early stage the
page is not visible to anyone else.
A very simplistic benchmark (allocating 10000000 64-bytes objects in a
row) shows ~15% win. In the real life it seems that most workloads are
not very sensitive to the speed of (accounted) slab allocations.
[guro@fb.com: open-code set_page_objcgs() and add some comments, by Johannes]
Link: https://lkml.kernel.org/r/20201113001926.GA2934489@carbon.dhcp.thefacebook.com
[akpm@linux-foundation.org: fix it for mm-slub-call-account_slab_page-after-slab-page-initialization-fix.patch]
Link: https://lkml.kernel.org/r/20201110195753.530157-2-guro@fb.com
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The boot param and config determine the value of memcg_sysfs_enabled,
which is unused since commit 10befea91b ("mm: memcg/slab: use a single
set of kmem_caches for all allocations") as there are no per-memcg kmem
caches anymore.
Link: https://lkml.kernel.org/r/20210127124745.7928-1-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: David Rientjes <rientjes@google.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In deactivate_slab() we currently move all but one objects on the cpu
freelist to the page freelist one by one using the costly cmpxchg_double()
operation. Then we unfreeze the page while moving the last object on page
freelist, with a final cmpxchg_double().
This can be optimized to avoid the cmpxchg_double() per object. Just
count the objects on cpu freelist (to adjust page->inuse properly) and
also remember the last object in the chain. Then splice page->freelist to
the last object and effectively add the whole cpu freelist to
page->freelist while unfreezing the page, with a single cmpxchg_double().
Link: https://lkml.kernel.org/r/20210115183543.15097-1-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Jann Horn <jannh@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since commit 03afc0e25f ("slab: get_online_mems for
kmem_cache_{create,destroy,shrink}") we are taking memory hotplug lock for
SLAB and SLUB when creating, destroying or shrinking a cache. It is quite
a heavy lock and it's best to avoid it if possible, as we had several
issues with lockdep complaining about ordering in the past, see e.g.
e4f8e513c3 ("mm/slub: fix a deadlock in show_slab_objects()").
The problem scenario in 03afc0e25f (solved by the memory hotplug lock)
can be summarized as follows: while there's slab_mutex synchronizing new
kmem cache creation and SLUB's MEM_GOING_ONLINE callback
slab_mem_going_online_callback(), we may miss creation of kmem_cache_node
for the hotplugged node in the new kmem cache, because the hotplug
callback doesn't yet see the new cache, and cache creation in
init_kmem_cache_nodes() only inits kmem_cache_node for nodes in the
N_NORMAL_MEMORY nodemask, which however may not yet include the new node,
as that happens only later after the MEM_GOING_ONLINE callback.
Instead of using get/put_online_mems(), the problem can be solved by SLUB
maintaining its own nodemask of nodes for which it has allocated the
per-node kmem_cache_node structures. This nodemask would generally mirror
the N_NORMAL_MEMORY nodemask, but would be updated only in under SLUB's
control in its memory hotplug callbacks under the slab_mutex. This patch
adds such nodemask and its handling.
Commit 03afc0e25f mentiones "issues like [the one above]", but there
don't appear to be further issues. All the paths (shared for SLAB and
SLUB) taking the memory hotplug locks are also taking the slab_mutex,
except kmem_cache_shrink() where 03afc0e25f replaced slab_mutex with
get/put_online_mems().
We however cannot simply restore slab_mutex in kmem_cache_shrink(), as
SLUB can enters the function from a write to sysfs 'shrink' file, thus
holding kernfs lock, and in kmem_cache_create() the kernfs lock is nested
within slab_mutex. But on closer inspection we don't actually need to
protect kmem_cache_shrink() from hotplug callbacks: While SLUB's
__kmem_cache_shrink() does for_each_kmem_cache_node(), missing a new node
added in parallel hotplug is not fatal, and parallel hotremove does not
free kmem_cache_node's anymore after the previous patch, so use-after free
cannot happen. The per-node shrinking itself is protected by
n->list_lock. Same is true for SLAB, and SLOB is no-op.
SLAB also doesn't need the memory hotplug locking, which it only gained by
03afc0e25f through the shared paths in slab_common.c. Its memory
hotplug callbacks are also protected by slab_mutex against races with
these paths. The problem of SLUB relying on N_NORMAL_MEMORY doesn't apply
to SLAB, as its setup_kmem_cache_nodes relies on N_ONLINE, and the new
node is already set there during the MEM_GOING_ONLINE callback, so no
special care is needed for SLAB.
As such, this patch removes all get/put_online_mems() usage by the slab
subsystem.
Link: https://lkml.kernel.org/r/20210113131634.3671-3-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Qian Cai <cai@redhat.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "mm, slab, slub: remove cpu and memory hotplug locks".
Some related work caused me to look at how we use get/put_mems_online()
and get/put_online_cpus() during kmem cache
creation/descruction/shrinking, and realize that it should be actually
safe to remove all of that with rather small effort (as e.g. Michal Hocko
suspected in some of the past discussions already). This has the benefit
to avoid rather heavy locks that have caused locking order issues already
in the past. So this is the result, Patches 2 and 3 remove memory hotplug
and cpu hotplug locking, respectively. Patch 1 is due to realization that
in fact some races exist despite the locks (even if not removed), but the
most sane solution is not to introduce more of them, but rather accept
some wasted memory in scenarios that should be rare anyway (full memory
hot remove), as we do the same in other contexts already.
This patch (of 3):
Commit e4f8e513c3 ("mm/slub: fix a deadlock in show_slab_objects()") has
fixed a problematic locking order by removing the memory hotplug lock
get/put_online_mems() from show_slab_objects(). During the discussion, it
was argued [1] that this is OK, because existing slabs on the node would
prevent a hotremove to proceed.
That's true, but per-node kmem_cache_node structures are not necessarily
allocated on the same node and may exist even without actual slab pages on
the same node. Any path that uses get_node() directly or via
for_each_kmem_cache_node() (such as show_slab_objects()) can race with
freeing of kmem_cache_node even with the !NULL check, resulting in
use-after-free.
To that end, commit e4f8e513c3 argues in a comment that:
* We don't really need mem_hotplug_lock (to hold off
* slab_mem_going_offline_callback) here because slab's memory hot
* unplug code doesn't destroy the kmem_cache->node[] data.
While it's true that slab_mem_going_offline_callback() doesn't free the
kmem_cache_node, the later callback slab_mem_offline_callback() actually
does, so the race and use-after-free exists. Not just for
show_slab_objects() after commit e4f8e513c3, but also many other places
that are not under slab_mutex. And adding slab_mutex locking or other
synchronization to SLUB paths such as get_any_partial() would be bad for
performance and error-prone.
The easiest solution is therefore to make the abovementioned comment true
and stop freeing the kmem_cache_node structures, accepting some wasted
memory in the full memory node removal scenario. Analogically we also
don't free hotremoved pgdat as mentioned in [1], nor the similar per-node
structures in SLAB. Importantly this approach will not block the
hotremove, as generally such nodes should be movable in order to succeed
hotremove in the first place, and thus the GFP_KERNEL allocated
kmem_cache_node will come from elsewhere.
[1] https://lore.kernel.org/linux-mm/20190924151147.GB23050@dhcp22.suse.cz/
Link: https://lkml.kernel.org/r/20210113131634.3671-1-vbabka@suse.cz
Link: https://lkml.kernel.org/r/20210113131634.3671-2-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Qian Cai <cai@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If kmemleak is enabled, it uses a kmem cache for its own objects. These
objects are used to hold information kmemleak uses, including a stack
trace. If slub_debug is also turned on, each of them has *another* stack
trace, so the overhead adds up, and on my tests (on ARCH=um, admittedly)
2/3rds of the allocations end up being doing the stack tracing.
Turn off SLAB_STORE_USER if SLAB_NOLEAKTRACE was given, to avoid storing
the essentially same data twice.
Link: https://lkml.kernel.org/r/20210113215114.d94efa13ba30.I117b6764e725b3192318bbcf4269b13b709539ae@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This argument hasn't been used since e153362a50 ("slub: Remove objsize
check in kmem_cache_flags()") so simply remove it.
Link: https://lkml.kernel.org/r/20210126095733.974665-1-nborisov@suse.com
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Christoph Lameter <cl@linux.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently, a trace record generated by the RCU core is as below.
... kmem_cache_free: call_site=rcu_core+0x1fd/0x610 ptr=00000000f3b49a66
It doesn't tell us what the RCU core has freed.
This patch adds the slab name to trace_kmem_cache_free().
The new format is as follows.
... kmem_cache_free: call_site=rcu_core+0x1fd/0x610 ptr=0000000037f79c8d name=dentry
... kmem_cache_free: call_site=rcu_core+0x1fd/0x610 ptr=00000000f78cb7b5 name=sock_inode_cache
... kmem_cache_free: call_site=rcu_core+0x1fd/0x610 ptr=0000000018768985 name=pool_workqueue
... kmem_cache_free: call_site=rcu_core+0x1fd/0x610 ptr=000000006a6cb484 name=radix_tree_node
We can use it to understand what the RCU core is going to free. For
example, some users maybe interested in when the RCU core starts
freeing reclaimable slabs like dentry to reduce memory pressure.
Link: https://lkml.kernel.org/r/20201216072804.8838-1-jian.w.wen@oracle.com
Signed-off-by: Jacob Wen <jian.w.wen@oracle.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull RCU updates from Paul E. McKenney:
- Documentation updates.
- Miscellaneous fixes.
- kfree_rcu() updates: Addition of mem_dump_obj() to provide allocator return
addresses to more easily locate bugs. This has a couple of RCU-related commits,
but is mostly MM. Was pulled in with akpm's agreement.
- Per-callback-batch tracking of numbers of callbacks,
which enables better debugging information and smarter
reactions to large numbers of callbacks.
- The first round of changes to allow CPUs to be runtime switched from and to
callback-offloaded state.
- CONFIG_PREEMPT_RT-related changes.
- RCU CPU stall warning updates.
- Addition of polling grace-period APIs for SRCU.
- Torture-test and torture-test scripting updates, including a "torture everything"
script that runs rcutorture, locktorture, scftorture, rcuscale, and refscale.
Plus does an allmodconfig build.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When creating a new kmem cache, SLUB determines how large the slab pages
will based on number of inputs, including the number of CPUs in the
system. Larger slab pages mean that more objects can be allocated/free
from per-cpu slabs before accessing shared structures, but also
potentially more memory can be wasted due to low slab usage and
fragmentation. The rough idea of using number of CPUs is that larger
systems will be more likely to benefit from reduced contention, and also
should have enough memory to spare.
Number of CPUs used to be determined as nr_cpu_ids, which is number of
possible cpus, but on some systems many will never be onlined, thus
commit 045ab8c948 ("mm/slub: let number of online CPUs determine the
slub page order") changed it to nr_online_cpus(). However, for kmem
caches created early before CPUs are onlined, this may lead to
permamently low slab page sizes.
Vincent reports a regression [1] of hackbench on arm64 systems:
"I'm facing significant performances regression on a large arm64
server system (224 CPUs). Regressions is also present on small arm64
system (8 CPUs) but in a far smaller order of magnitude
On 224 CPUs system : 9 iterations of hackbench -l 16000 -g 16
v5.11-rc4 : 9.135sec (+/- 0.45%)
v5.11-rc4 + revert this patch: 3.173sec (+/- 0.48%)
v5.10: 3.136sec (+/- 0.40%)"
Mel reports a regression [2] of hackbench on x86_64, with lockstat suggesting
page allocator contention:
"i.e. the patch incurs a 7% to 32% performance penalty. This bisected
cleanly yesterday when I was looking for the regression and then
found the thread.
Numerous caches change size. For example, kmalloc-512 goes from
order-0 (vanilla) to order-2 with the revert.
So mostly this is down to the number of times SLUB calls into the
page allocator which only caches order-0 pages on a per-cpu basis"
Clearly num_online_cpus() doesn't work too early in bootup. We could
change the order dynamically in a memory hotplug callback, but runtime
order changing for existing kmem caches has been already shown as
dangerous, and removed in 32a6f409b6 ("mm, slub: remove runtime
allocation order changes").
It could be resurrected in a safe manner with some effort, but to fix
the regression we need something simpler.
We could use num_present_cpus() that should be the number of physically
present CPUs even before they are onlined. That would work for PowerPC
[3], which triggered the original commit, but that still doesn't work on
arm64 [4] as explained in [5].
So this patch tries to determine the best available value without
specific arch knowledge.
- num_present_cpus() if the number is larger than 1, as that means the
arch is likely setting it properly
- nr_cpu_ids otherwise
This should fix the reported regressions while also keeping the effect
of 045ab8c948 for PowerPC systems. It's possible there are
configurations where num_present_cpus() is 1 during boot while
nr_cpu_ids is at the same time bloated, so these (if they exist) would
keep the large orders based on nr_cpu_ids as was before 045ab8c948.
[1] https://lore.kernel.org/linux-mm/CAKfTPtA_JgMf_+zdFbcb_V9rM7JBWNPjAz9irgwFj7Rou=xzZg@mail.gmail.com/
[2] https://lore.kernel.org/linux-mm/20210128134512.GF3592@techsingularity.net/
[3] https://lore.kernel.org/linux-mm/20210123051607.GC2587010@in.ibm.com/
[4] https://lore.kernel.org/linux-mm/CAKfTPtAjyVmS5VYvU6DBxg4-JEo5bdmWbngf-03YsY18cmWv_g@mail.gmail.com/
[5] https://lore.kernel.org/linux-mm/20210126230305.GD30941@willie-the-truck/
Link: https://lkml.kernel.org/r/20210208134108.22286-1-vbabka@suse.cz
Fixes: 045ab8c948 ("mm/slub: let number of online CPUs determine the slub page order")
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Vincent Guittot <vincent.guittot@linaro.org>
Reported-by: Mel Gorman <mgorman@techsingularity.net>
Tested-by: Mel Gorman <mgorman@techsingularity.net>
Tested-by: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Bharata B Rao <bharata@linux.ibm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Jann Horn <jannh@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This reverts commit dde3c6b72a.
syzbot report a double-free bug. The following case can cause this bug.
- mm/slab_common.c: create_cache(): if the __kmem_cache_create() fails,
it does:
out_free_cache:
kmem_cache_free(kmem_cache, s);
- but __kmem_cache_create() - at least for slub() - will have done
sysfs_slab_add(s)
-> sysfs_create_group() .. fails ..
-> kobject_del(&s->kobj); .. which frees s ...
We can't remove the kmem_cache_free() in create_cache(), because other
error cases of __kmem_cache_create() do not free this.
So, revert the commit dde3c6b72a ("mm/slub: fix a memory leak in
sysfs_slab_add()") to fix this.
Reported-by: syzbot+d0bd96b4696c1ef67991@syzkaller.appspotmail.com
Fixes: dde3c6b72a ("mm/slub: fix a memory leak in sysfs_slab_add()")
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A few places where SLUB accesses object's data or metadata were missed
in a previous patch. This leads to false positives with hardware
tag-based KASAN when bulk allocations are used with init_on_alloc/free.
Fix the false-positives by resetting pointer tags during these accesses.
(The kasan_reset_tag call is removed from slab_alloc_node, as it's added
into maybe_wipe_obj_freeptr.)
Link: https://linux-review.googlesource.com/id/I50dd32838a666e173fe06c3c5c766f2c36aae901
Link: https://lkml.kernel.org/r/093428b5d2ca8b507f4a79f92f9929b35f7fada7.1610731872.git.andreyknvl@google.com
Fixes: aa1ef4d7b3 ("kasan, mm: reset tags when accessing metadata")
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There are kernel facilities such as per-CPU reference counts that give
error messages in generic handlers or callbacks, whose messages are
unenlightening. In the case of per-CPU reference-count underflow, this
is not a problem when creating a new use of this facility because in that
case the bug is almost certainly in the code implementing that new use.
However, trouble arises when deploying across many systems, which might
exercise corner cases that were not seen during development and testing.
Here, it would be really nice to get some kind of hint as to which of
several uses the underflow was caused by.
This commit therefore exposes a mem_dump_obj() function that takes
a pointer to memory (which must still be allocated if it has been
dynamically allocated) and prints available information on where that
memory came from. This pointer can reference the middle of the block as
well as the beginning of the block, as needed by things like RCU callback
functions and timer handlers that might not know where the beginning of
the memory block is. These functions and handlers can use mem_dump_obj()
to print out better hints as to where the problem might lie.
The information printed can depend on kernel configuration. For example,
the allocation return address can be printed only for slab and slub,
and even then only when the necessary debug has been enabled. For slab,
build with CONFIG_DEBUG_SLAB=y, and either use sizes with ample space
to the next power of two or use the SLAB_STORE_USER when creating the
kmem_cache structure. For slub, build with CONFIG_SLUB_DEBUG=y and
boot with slub_debug=U, or pass SLAB_STORE_USER to kmem_cache_create()
if more focused use is desired. Also for slub, use CONFIG_STACKTRACE
to enable printing of the allocation-time stack trace.
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: <linux-mm@kvack.org>
Reported-by: Andrii Nakryiko <andrii@kernel.org>
[ paulmck: Convert to printing and change names per Joonsoo Kim. ]
[ paulmck: Move slab definition per Stephen Rothwell and kbuild test robot. ]
[ paulmck: Handle CONFIG_MMU=n case where vmalloc() is kmalloc(). ]
[ paulmck: Apply Vlastimil Babka feedback on slab.c kmem_provenance(). ]
[ paulmck: Extract more info from !SLUB_DEBUG per Joonsoo Kim. ]
[ paulmck: Explicitly check for small pointers per Naresh Kamboju. ]
Acked-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
acquire_slab() fails if there is contention on the freelist of the page
(probably because some other CPU is concurrently freeing an object from
the page). In that case, it might make sense to look for a different page
(since there might be more remote frees to the page from other CPUs, and
we don't want contention on struct page).
However, the current code accidentally stops looking at the partial list
completely in that case. Especially on kernels without CONFIG_NUMA set,
this means that get_partial() fails and new_slab_objects() falls back to
new_slab(), allocating new pages. This could lead to an unnecessary
increase in memory fragmentation.
Link: https://lkml.kernel.org/r/20201228130853.1871516-1-jannh@google.com
Fixes: 7ced371971 ("slub: Acquire_slab() avoid loop")
Signed-off-by: Jann Horn <jannh@google.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It's convenient to have page->objects initialized before calling into
account_slab_page(). In particular, this information can be used to
pre-alloc the obj_cgroup vector.
Let's call account_slab_page() a bit later, after the initialization of
page->objects.
This commit doesn't bring any functional change, but is required for
further optimizations.
[akpm@linux-foundation.org: undo changes needed by forthcoming mm-memcg-slab-pre-allocate-obj_cgroups-for-slab-caches-with-slab_account.patch]
Link: https://lkml.kernel.org/r/20201110195753.530157-1-guro@fb.com
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kernel allocator code accesses metadata for slab objects, that may lie
out-of-bounds of the object itself, or be accessed when an object is
freed. Such accesses trigger tag faults and lead to false-positive
reports with hardware tag-based KASAN.
Software KASAN modes disable instrumentation for allocator code via
KASAN_SANITIZE Makefile macro, and rely on kasan_enable/disable_current()
annotations which are used to ignore KASAN reports.
With hardware tag-based KASAN neither of those options are available, as
it doesn't use compiler instrumetation, no tag faults are ignored, and MTE
is disabled after the first one.
Instead, reset tags when accessing metadata (currently only for SLUB).
Link: https://lkml.kernel.org/r/a0f3cefbc49f34c843b664110842de4db28179d0.1606161801.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Acked-by: Marco Elver <elver@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Convert the unbounded uses of sprintf to sysfs_emit.
A few conversions may now not end in a newline if the output buffer is
overflowed.
Link: https://lkml.kernel.org/r/0c90a90f466167f8c37de4b737553cf49c4a277f.1605376435.git.joe@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The page order of the slab that gets chosen for a given slab cache depends
on the number of objects that can be fit in the slab while meeting other
requirements. We start with a value of minimum objects based on
nr_cpu_ids that is driven by possible number of CPUs and hence could be
higher than the actual number of CPUs present in the system. This leads
to calculate_order() chosing a page order that is on the higher side
leading to increased slab memory consumption on systems that have bigger
page sizes.
Hence rely on the number of online CPUs when determining the mininum
objects, thereby increasing the chances of chosing a lower conservative
page order for the slab.
Vlastimil said:
"Ideally, we would react to hotplug events and update existing caches
accordingly. But for that, recalculation of order for existing caches
would have to be made safe, while not affecting hot paths. We have
removed the sysfs interface with 32a6f409b6 ("mm, slub: remove
runtime allocation order changes") as it didn't seem easy and worth
the trouble.
In case somebody wants to start with a large order right from the
boot because they know they will hotplug lots of cpus later, they can
use slub_min_objects= boot param to override this heuristic. So in
case this change regresses somebody's performance, there's a way
around it and thus the risk is low IMHO"
Link: https://lkml.kernel.org/r/20201118082759.1413056-1-bharata@linux.ibm.com
Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 9cf7a11183 ("mm/slub: make add_full() condition more explicit")
replaced an unnecessarily generic kmem_cache_debug(s) check with an
explicit check of SLAB_STORE_USER and #ifdef CONFIG_SLUB_DEBUG.
We can achieve the same specific check with the recently added
kmem_cache_debug_flags() which removes the #ifdef and restores the
no-branch-overhead benefit of static key check when slub debugging is not
enabled.
Link: https://lkml.kernel.org/r/3ef24214-38c7-1238-8296-88caf7f48ab6@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Abel Wu <wuyun.wu@huawei.com>
Cc: Christopher Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Liu Xiang <liu.xiang6@zte.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The page allocator expects that page->mapping is NULL for a page being
freed. SLAB and SLUB use the slab_cache field which is in union with
mapping, but before freeing the page, the field is referenced with the
"mapping" name when set to NULL.
It's IMHO more correct (albeit functionally the same) to use the
slab_cache name as that's the field we use in SL*B, and document why we
clear it in a comment (we don't clear fields such as s_mem or freelist, as
page allocator doesn't care about those). While using the 'mapping' name
would automagically keep the code correct if the unions in struct page
changed, such changes should be done consciously and needed changes
evaluated - the comment should help with that.
Link: https://lkml.kernel.org/r/20201210160020.21562-1-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
While doing memory hot-unplug operation on a PowerPC VM running 1024 CPUs
with 11TB of ram, I hit the following panic:
BUG: Kernel NULL pointer dereference on read at 0x00000007
Faulting instruction address: 0xc000000000456048
Oops: Kernel access of bad area, sig: 11 [#2]
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS= 2048 NUMA pSeries
Modules linked in: rpadlpar_io rpaphp
CPU: 160 PID: 1 Comm: systemd Tainted: G D 5.9.0 #1
NIP: c000000000456048 LR: c000000000455fd4 CTR: c00000000047b350
REGS: c00006028d1b77a0 TRAP: 0300 Tainted: G D (5.9.0)
MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 24004228 XER: 00000000
CFAR: c00000000000f1b0 DAR: 0000000000000007 DSISR: 40000000 IRQMASK: 0
GPR00: c000000000455fd4 c00006028d1b7a30 c000000001bec800 0000000000000000
GPR04: 0000000000000dc0 0000000000000000 00000000000374ef c00007c53df99320
GPR08: 000007c53c980000 0000000000000000 000007c53c980000 0000000000000000
GPR12: 0000000000004400 c00000001e8e4400 0000000000000000 0000000000000f6a
GPR16: 0000000000000000 c000000001c25930 c000000001d62528 00000000000000c1
GPR20: c000000001d62538 c00006be469e9000 0000000fffffffe0 c0000000003c0ff8
GPR24: 0000000000000018 0000000000000000 0000000000000dc0 0000000000000000
GPR28: c00007c513755700 c000000001c236a4 c00007bc4001f800 0000000000000001
NIP [c000000000456048] __kmalloc_node+0x108/0x790
LR [c000000000455fd4] __kmalloc_node+0x94/0x790
Call Trace:
kvmalloc_node+0x58/0x110
mem_cgroup_css_online+0x10c/0x270
online_css+0x48/0xd0
cgroup_apply_control_enable+0x2c4/0x470
cgroup_mkdir+0x408/0x5f0
kernfs_iop_mkdir+0x90/0x100
vfs_mkdir+0x138/0x250
do_mkdirat+0x154/0x1c0
system_call_exception+0xf8/0x200
system_call_common+0xf0/0x27c
Instruction dump:
e93e0000 e90d0030 39290008 7cc9402a e94d0030 e93e0000 7ce95214 7f89502a
2fbc0000 419e0018 41920230 e9270010 <89290007> 7f994800 419e0220 7ee6bb78
This pointing to the following code:
mm/slub.c:2851
if (unlikely(!object || !node_match(page, node))) {
c000000000456038: 00 00 bc 2f cmpdi cr7,r28,0
c00000000045603c: 18 00 9e 41 beq cr7,c000000000456054 <__kmalloc_node+0x114>
node_match():
mm/slub.c:2491
if (node != NUMA_NO_NODE && page_to_nid(page) != node)
c000000000456040: 30 02 92 41 beq cr4,c000000000456270 <__kmalloc_node+0x330>
page_to_nid():
include/linux/mm.h:1294
c000000000456044: 10 00 27 e9 ld r9,16(r7)
c000000000456048: 07 00 29 89 lbz r9,7(r9) <<<< r9 = NULL
node_match():
mm/slub.c:2491
c00000000045604c: 00 48 99 7f cmpw cr7,r25,r9
c000000000456050: 20 02 9e 41 beq cr7,c000000000456270 <__kmalloc_node+0x330>
The panic occurred in slab_alloc_node() when checking for the page's node:
object = c->freelist;
page = c->page;
if (unlikely(!object || !node_match(page, node))) {
object = __slab_alloc(s, gfpflags, node, addr, c);
stat(s, ALLOC_SLOWPATH);
The issue is that object is not NULL while page is NULL which is odd but
may happen if the cache flush happened after loading object but before
loading page. Thus checking for the page pointer is required too.
The cache flush is done through an inter processor interrupt when a
piece of memory is off-lined. That interrupt is triggered when a memory
hot-unplug operation is initiated and offline_pages() is calling the
slub's MEM_GOING_OFFLINE callback slab_mem_going_offline_callback()
which is calling flush_cpu_slab(). If that interrupt is caught between
the reading of c->freelist and the reading of c->page, this could lead
to such a situation. That situation is expected and the later call to
this_cpu_cmpxchg_double() will detect the change to c->freelist and redo
the whole operation.
In commit 6159d0f5c0 ("mm/slub.c: page is always non-NULL in
node_match()") check on the page pointer has been removed assuming that
page is always valid when it is called. It happens that this is not
true in that particular case, so check for page before calling
node_match() here.
Fixes: 6159d0f5c0 ("mm/slub.c: page is always non-NULL in node_match()")
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Nathan Lynch <nathanl@linux.ibm.com>
Cc: Scott Cheloha <cheloha@linux.ibm.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20201027190406.33283-1-ldufour@linux.ibm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Correct one function name "get_partials" with "get_partial". Update the
old struct name of list3 with kmem_cache_node.
Signed-off-by: Chen Tao <chentao3@hotmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lkml.kernel.org/r/Message-ID:
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Object cgroup charging is done for all the objects during allocation, but
during freeing, uncharging ends up happening for only one object in the
case of bulk allocation/freeing.
Fix this by having a separate call to uncharge all the objects from
kmem_cache_free_bulk() and by modifying memcg_slab_free_hook() to take
care of bulk uncharging.
Fixes: 964d4bd370 ("mm: memcg/slab: save obj_cgroup for non-root slab objects"
Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20201009060423.390479-1-bharata@linux.ibm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The commit below is incomplete, as it didn't handle the add_full() part.
commit a4d3f8916c ("slub: remove useless kmem_cache_debug() before
remove_full()")
This patch checks for SLAB_STORE_USER instead of kmem_cache_debug(), since
that should be the only context in which we need the list_lock for
add_full().
Signed-off-by: Abel Wu <wuyun.wu@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Liu Xiang <liu.xiang6@zte.com.cn>
Link: https://lkml.kernel.org/r/20200811020240.1231-1-wuyun.wu@huawei.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The ALLOC_SLOWPATH statistics is missing in bulk allocation now. Fix it
by doing statistics in alloc slow path.
Signed-off-by: Abel Wu <wuyun.wu@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Hewenliang <hewenliang4@huawei.com>
Cc: Hu Shiyuan <hushiyuan@huawei.com>
Link: http://lkml.kernel.org/r/20200811022427.1363-1-wuyun.wu@huawei.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The two conditions are mutually exclusive and gcc compiler will optimise
this into if-else-like pattern. Given that the majority of free_slowpath
is free_frozen, let's provide some hint to the compilers.
Tests (perf bench sched messaging -g 20 -l 400000, executed 10x
after reboot) are done and the summarized result:
un-patched patched
max. 192.316 189.851
min. 187.267 186.252
avg. 189.154 188.086
stdev. 1.37 0.99
Signed-off-by: Abel Wu <wuyun.wu@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Hewenliang <hewenliang4@huawei.com>
Cc: Hu Shiyuan <hushiyuan@huawei.com>
Link: http://lkml.kernel.org/r/20200813101812.1617-1-wuyun.wu@huawei.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The routine that applies debug flags to the kmem_cache slabs
inadvertantly prevents non-debug flags from being applied to those
same objects. That is, if slub_debug=<flag>,<slab> is specified,
non-debugged slabs will end up having flags of zero, and the slabs
may be unusable.
Fix this by including the input flags for non-matching slabs with the
contents of slub_debug, so that the caches are created as expected
alongside any debugging options that may be requested. With this, we
can remove the check for a NULL slub_debug_string, since it's covered
by the loop itself.
Fixes: e17f1dfba3 ("mm, slub: extend slub_debug syntax for multiple blocks")
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Kees Cook <keescook@chromium.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Link: https://lkml.kernel.org/r/20200930161931.28575-1-farman@linux.ibm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 52f2347808 ("mm/slub.c: fix corrupted freechain in
deactivate_slab()") suffered an update when picked up from LKML [1].
Specifically, relocating 'freelist = NULL' into 'freelist_corrupted()'
created a no-op statement. Fix it by sticking to the behavior intended
in the original patch [1]. In addition, make freelist_corrupted()
immune to passing NULL instead of &freelist.
The issue has been spotted via static analysis and code review.
[1] https://lore.kernel.org/linux-mm/20200331031450.12182-1-dongli.zhang@oracle.com/
Fixes: 52f2347808 ("mm/slub.c: fix corrupted freechain in deactivate_slab()")
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Dongli Zhang <dongli.zhang@oracle.com>
Cc: Joe Jin <joe.jin@oracle.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20200824130643.10291-1-erosca@de.adit-jv.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
charge_slab_page() and uncharge_slab_page() are not related anymore to
memcg charging and uncharging. In order to make their names less
confusing, let's rename them to account_slab_page() and
unaccount_slab_page() respectively.
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Link: http://lkml.kernel.org/r/20200707173612.124425-2-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
charge_slab_page() is not using the gfp argument anymore,
remove it.
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Link: http://lkml.kernel.org/r/20200707173612.124425-1-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Instead of having two sets of kmem_caches: one for system-wide and
non-accounted allocations and the second one shared by all accounted
allocations, we can use just one.
The idea is simple: space for obj_cgroup metadata can be allocated on
demand and filled only for accounted allocations.
It allows to remove a bunch of code which is required to handle kmem_cache
clones for accounted allocations. There is no more need to create them,
accumulate statistics, propagate attributes, etc. It's a quite
significant simplification.
Also, because the total number of slab_caches is reduced almost twice (not
all kmem_caches have a memcg clone), some additional memory savings are
expected. On my devvm it additionally saves about 3.5% of slab memory.
[guro@fb.com: fix build on MIPS]
Link: http://lkml.kernel.org/r/20200717214810.3733082-1-guro@fb.com
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Naresh Kamboju <naresh.kamboju@linaro.org>
Link: http://lkml.kernel.org/r/20200623174037.3951353-18-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently there are two lists of kmem_caches:
1) slab_caches, which contains all kmem_caches,
2) slab_root_caches, which contains only root kmem_caches.
And there is some preprocessor magic to have a single list if
CONFIG_MEMCG_KMEM isn't enabled.
It was required earlier because the number of non-root kmem_caches was
proportional to the number of memory cgroups and could reach really big
values. Now, when it cannot exceed the number of root kmem_caches, there
is really no reason to maintain two lists.
We never iterate over the slab_root_caches list on any hot paths, so it's
perfectly fine to iterate over slab_caches and filter out non-root
kmem_caches.
It allows to remove a lot of config-dependent code and two pointers from
the kmem_cache structure.
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/20200623174037.3951353-16-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is fairly big but mostly red patch, which makes all accounted slab
allocations use a single set of kmem_caches instead of creating a separate
set for each memory cgroup.
Because the number of non-root kmem_caches is now capped by the number of
root kmem_caches, there is no need to shrink or destroy them prematurely.
They can be perfectly destroyed together with their root counterparts.
This allows to dramatically simplify the management of non-root
kmem_caches and delete a ton of code.
This patch performs the following changes:
1) introduces memcg_params.memcg_cache pointer to represent the
kmem_cache which will be used for all non-root allocations
2) reuses the existing memcg kmem_cache creation mechanism
to create memcg kmem_cache on the first allocation attempt
3) memcg kmem_caches are named <kmemcache_name>-memcg,
e.g. dentry-memcg
4) simplifies memcg_kmem_get_cache() to just return memcg kmem_cache
or schedule it's creation and return the root cache
5) removes almost all non-root kmem_cache management code
(separate refcounter, reparenting, shrinking, etc)
6) makes slab debugfs to display root_mem_cgroup css id and never
show :dead and :deact flags in the memcg_slabinfo attribute.
Following patches in the series will simplify the kmem_cache creation.
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/20200623174037.3951353-13-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Store the obj_cgroup pointer in the corresponding place of
page->obj_cgroups for each allocated non-root slab object. Make sure that
each allocated object holds a reference to obj_cgroup.
Objcg pointer is obtained from the memcg->objcg dereferencing in
memcg_kmem_get_cache() and passed from pre_alloc_hook to post_alloc_hook.
Then in case of successful allocation(s) it's getting stored in the
page->obj_cgroups vector.
The objcg obtaining part look a bit bulky now, but it will be simplified
by next commits in the series.
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/20200623174037.3951353-9-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This commit implements SLUB version of the obj_to_index() function, which
will be required to calculate the offset of obj_cgroup in the obj_cgroups
vector to store/obtain the objcg ownership data.
To make it faster, let's repeat the SLAB's trick introduced by commit
6a2d7a955d ("SLAB: use a multiply instead of a divide in
obj_to_index()") and avoid an expensive division.
Vlastimil Babka noticed, that SLUB does have already a similar function
called slab_index(), which is defined only if SLUB_DEBUG is enabled. The
function does a similar math, but with a division, and it also takes a
page address instead of a page pointer.
Let's remove slab_index() and replace it with the new helper
__obj_to_index(), which takes a page address. obj_to_index() will be a
simple wrapper taking a page pointer and passing page_address(page) into
__obj_to_index().
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/20200623174037.3951353-5-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In order to prepare for per-object slab memory accounting, convert
NR_SLAB_RECLAIMABLE and NR_SLAB_UNRECLAIMABLE vmstat items to bytes.
To make it obvious, rename them to NR_SLAB_RECLAIMABLE_B and
NR_SLAB_UNRECLAIMABLE_B (similar to NR_KERNEL_STACK_KB).
Internally global and per-node counters are stored in pages, however memcg
and lruvec counters are stored in bytes. This scheme may look weird, but
only for now. As soon as slab pages will be shared between multiple
cgroups, global and node counters will reflect the total number of slab
pages. However memcg and lruvec counters will be used for per-memcg slab
memory tracking, which will take separate kernel objects in the account.
Keeping global and node counters in pages helps to avoid additional
overhead.
The size of slab memory shouldn't exceed 4Gb on 32-bit machines, so it
will fit into atomic_long_t we use for vmstats.
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Christoph Lameter <cl@linux.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/20200623174037.3951353-4-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Provide the necessary KCSAN checks to assist with debugging racy
use-after-frees. While KASAN is more reliable at generally catching such
use-after-frees (due to its use of a quarantine), it can be difficult to
debug racy use-after-frees. If a reliable reproducer exists, KCSAN can
assist in debugging such issues.
Note: ASSERT_EXCLUSIVE_ACCESS is a convenience wrapper if the size is
simply sizeof(var). Instead, here we just use __kcsan_check_access()
explicitly to pass the correct size.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Link: http://lkml.kernel.org/r/20200623072653.114563-1-elver@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There is no point in using lockdep_assert_held() unlock that is about to
be unlocked. It works only with lockdep and lockdep will complain if
spin_unlock() is used on a lock that has not been locked.
Remove superfluous lockdep_assert_held().
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Christopher Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20200618201234.795692-2-bigeasy@linutronix.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
cache_from_obj() was added by commit b9ce5ef49f ("sl[au]b: always get
the cache from its page in kmem_cache_free()") to support kmemcg, where
per-memcg cache can be different from the root one, so we can't use the
kmem_cache pointer given to kmem_cache_free().
Prior to that commit, SLUB already had debugging check+warning that could
be enabled to compare the given kmem_cache pointer to one referenced by
the slab page where the object-to-be-freed resides. This check was moved
to cache_from_obj(). Later the check was also enabled for
SLAB_FREELIST_HARDENED configs by commit 598a0717a8 ("mm/slab: validate
cache membership under freelist hardening").
These checks and warnings can be useful especially for the debugging,
which can be improved. Commit 598a0717a8 changed the pr_err() with
WARN_ON_ONCE() to WARN_ONCE() so only the first hit is now reported,
others are silent. This patch changes it to WARN() so that all errors are
reported.
It's also useful to print SLUB allocation/free tracking info for the
offending object, if tracking is enabled. Thus, export the SLUB
print_tracking() function and provide an empty one for SLAB.
For SLUB we can also benefit from the static key check in
kmem_cache_debug_flags(), but we need to move this function to slab.h and
declare the static key there.
[1] https://lore.kernel.org/r/20200608230654.828134-18-guro@fb.com
[vbabka@suse.cz: avoid bogus WARN()]
Link: https://lore.kernel.org/r/20200623090213.GW5535@shao2-debian
Link: http://lkml.kernel.org/r/b33e0fa7-cd28-4788-9e54-5927846329ef@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Matthew Garrett <mjg59@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Vijayanand Jitta <vjitta@codeaurora.org>
Cc: Vinayak Menon <vinmenon@codeaurora.org>
Link: http://lkml.kernel.org/r/afeda7ac-748b-33d8-a905-56b708148ad5@suse.cz
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The function cache_from_obj() was added by commit b9ce5ef49f ("sl[au]b:
always get the cache from its page in kmem_cache_free()") to support
kmemcg, where per-memcg cache can be different from the root one, so we
can't use the kmem_cache pointer given to kmem_cache_free().
Prior to that commit, SLUB already had debugging check+warning that could
be enabled to compare the given kmem_cache pointer to one referenced by
the slab page where the object-to-be-freed resides. This check was moved
to cache_from_obj(). Later the check was also enabled for
SLAB_FREELIST_HARDENED configs by commit 598a0717a8 ("mm/slab: validate
cache membership under freelist hardening").
These checks and warnings can be useful especially for the debugging,
which can be improved. Commit 598a0717a8 changed the pr_err() with
WARN_ON_ONCE() to WARN_ONCE() so only the first hit is now reported,
others are silent. This patch changes it to WARN() so that all errors are
reported.
It's also useful to print SLUB allocation/free tracking info for the
offending object, if tracking is enabled. We could export the SLUB
print_tracking() function and provide an empty one for SLAB, or realize
that both the debugging and hardening cases in cache_from_obj() are only
supported by SLUB anyway. So this patch moves cache_from_obj() from
slab.h to separate instances in slab.c and slub.c, where the SLAB version
only does the kmemcg lookup and even could be completely removed once the
kmemcg rework [1] is merged. The SLUB version can thus easily use the
print_tracking() function. It can also use the kmem_cache_debug_flags()
static key check for improved performance in kernels without the hardening
and with debugging not enabled on boot.
[1] https://lore.kernel.org/r/20200608230654.828134-18-guro@fb.com
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Jann Horn <jannh@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Vijayanand Jitta <vjitta@codeaurora.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Pekka Enberg <penberg@kernel.org>
Link: http://lkml.kernel.org/r/20200610163135.17364-10-vbabka@suse.cz
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There are few more places in SLUB that could benefit from reduced overhead
of the static key introduced by a previous patch:
- setup_object_debug() called on each object in newly allocated slab page
- setup_page_debug() called on newly allocated slab page
- __free_slab() called on freed slab page
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Jann Horn <jannh@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Vijayanand Jitta <vjitta@codeaurora.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Pekka Enberg <penberg@kernel.org>
Link: http://lkml.kernel.org/r/20200610163135.17364-9-vbabka@suse.cz
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There are few places that call kmem_cache_debug(s) (which tests if any of
debug flags are enabled for a cache) immediately followed by a test for a
specific flag. The compiler can probably eliminate the extra check, but
we can make the code nicer by introducing kmem_cache_debug_flags() that
works like kmem_cache_debug() (including the static key check) but tests
for specific flag(s). The next patches will add more users.
[vbabka@suse.cz: change return from int to bool, per Kees. Add VM_WARN_ON_ONCE() for invalid flags, per Roman]
Link: http://lkml.kernel.org/r/949b90ed-e0f0-07d7-4d21-e30ec0958a7c@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: Christoph Lameter <cl@linux.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Jann Horn <jannh@google.com>
Cc: Vijayanand Jitta <vjitta@codeaurora.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Pekka Enberg <penberg@kernel.org>
Link: http://lkml.kernel.org/r/20200610163135.17364-8-vbabka@suse.cz
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
One advantage of CONFIG_SLUB_DEBUG is that a generic distro kernel can be
built with the option enabled, but it's inactive until simply enabled on
boot, without rebuilding the kernel. With a static key, we can further
eliminate the overhead of checking whether a cache has a particular debug
flag enabled if we know that there are no such caches (slub_debug was not
enabled during boot). We use the same mechanism also for e.g.
page_owner, debug_pagealloc or kmemcg functionality.
This patch introduces the static key and makes the general check for
per-cache debug flags kmem_cache_debug() use it. This benefits several
call sites, including (slow path but still rather frequent) __slab_free().
The next patches will add more uses.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Jann Horn <jannh@google.com>
Cc: Vijayanand Jitta <vjitta@codeaurora.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Pekka Enberg <penberg@kernel.org>
Link: http://lkml.kernel.org/r/20200610163135.17364-7-vbabka@suse.cz
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The attribute reflects the SLAB_RECLAIM_ACCOUNT cache flag. It's not
clear why this attribute was writable in the first place, as it's tied to
how the cache is used by its creator, it's not a user tunable.
Furthermore:
- it affects slab merging, but that's not being checked while toggled
- if affects whether __GFP_RECLAIMABLE flag is used to allocate page, but
the runtime toggle doesn't update allocflags
- it affects cache_vmstat_idx() so runtime toggling might lead to incosistency
of NR_SLAB_RECLAIMABLE and NR_SLAB_UNRECLAIMABLE
Thus make it read-only.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Jann Horn <jannh@google.com>
Cc: Vijayanand Jitta <vjitta@codeaurora.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Pekka Enberg <penberg@kernel.org>
Link: http://lkml.kernel.org/r/20200610163135.17364-6-vbabka@suse.cz
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
