Add ftrace.instance.*.alloc_snapshot option.
This option has been described in Documentation/trace/boottime-trace.rst
but not implemented yet.
ftrace.[instance.INSTANCE.]alloc_snapshot
Allocate snapshot buffer.
The difference from kernel.alloc_snapshot is that the kernel.alloc_snapshot
will allocate the buffer only for the main instance, but this can allocate
buffer for any new instances.
Link: https://lkml.kernel.org/r/160234368948.400560.15313384470765915015.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Initialize boot-time tracing in core_initcall_sync instead of
fs_initcall, and initialize required tracers (kprobes and synth)
in core_initcall. This will allow the boot-time tracing to trace
__init code from the beginning of postcore_initcall stage.
Link: https://lkml.kernel.org/r/159974155727.478751.7486926132902849578.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add per-instance tracing_on option, which will be useful with
traceon/traceoff event trigger actions. For example, if we
disable tracing_on by default and set traceon and traceoff on
a pair of events, we can trace functions between the pair of
events.
Link: https://lkml.kernel.org/r/159972811538.428528.2561315102284268611.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Fix boottime kprobe events to report and abort after each failure when
adding probes.
As an example, when we try to set multiprobe kprobe events in
bootconfig like this:
ftrace.event.kprobes.vfsevents {
probes = "vfs_read $arg1 $arg2,,
!error! not reported;?", // leads to error
"vfs_write $arg1 $arg2"
}
This will not work as expected. After
commit da0f1f4167 ("tracing/boottime: Fix kprobe event API usage"),
the function trace_boot_add_kprobe_event will not produce any error
message when adding a probe fails at kprobe_event_gen_cmd_start.
Furthermore, we continue to add probes when kprobe_event_gen_cmd_end fails
(and kprobe_event_gen_cmd_start did not fail). In this case the function
even returns successfully when the last call to kprobe_event_gen_cmd_end
is successful.
The behaviour of reporting and aborting after failures is not
consistent.
The function trace_boot_add_kprobe_event now reports each failure and
stops adding probes immediately.
Link: https://lkml.kernel.org/r/20200618163301.25854-1-sascha.ortmann@stud.uni-hannover.de
Cc: stable@vger.kernel.org
Cc: linux-kernel@i4.cs.fau.de
Co-developed-by: Maximilian Werner <maximilian.werner96@gmail.com>
Fixes: da0f1f4167 ("tracing/boottime: Fix kprobe event API usage")
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Maximilian Werner <maximilian.werner96@gmail.com>
Signed-off-by: Sascha Ortmann <sascha.ortmann@stud.uni-hannover.de>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Since commit 726721a518 ("tracing: Move synthetic events to
a separate file") decoupled synthetic event from histogram,
boot-time tracing also has to check CONFIG_SYNTH_EVENT instead
of CONFIG_HIST_TRIGGERS.
Link: http://lkml.kernel.org/r/159262475441.185015.5300725180746017555.stgit@devnote2
Fixes: 726721a518 ("tracing: Move synthetic events to a separate file")
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Fix boottime kprobe events to use API correctly for
multiple events.
For example, when we set a multiprobe kprobe events in
bootconfig like below,
ftrace.event.kprobes.myevent {
probes = "vfs_read $arg1 $arg2", "vfs_write $arg1 $arg2"
}
This cause an error;
trace_boot: Failed to add probe: p:kprobes/myevent (null) vfs_read $arg1 $arg2 vfs_write $arg1 $arg2
This shows the 1st argument becomes NULL and multiprobes
are merged to 1 probe.
Link: http://lkml.kernel.org/r/158779375766.6082.201939936008972838.stgit@devnote2
Cc: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Fixes: 29a1548105 ("tracing: Change trace_boot to use kprobe_event interface")
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Have trace_boot_add_synth_event() use the synth_event interface.
Also, rename synth_event_run_cmd() to synth_event_run_command() now
that trace_boot's version is gone.
Link: http://lkml.kernel.org/r/94f1fa0e31846d0bddca916b8663404b20559e34.1580323897.git.zanussi@kernel.org
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Have trace_boot_add_kprobe_event() use the kprobe_event interface.
Also, rename kprobe_event_run_cmd() to kprobe_event_run_command() now
that trace_boot's version is gone.
Link: http://lkml.kernel.org/r/af5429d11291ab1e9a85a0ff944af3b2bcf193c7.1580323897.git.zanussi@kernel.org
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Move external function declarations into kernel/trace/trace.h
from trace_boot.c for tracing subsystem internal use.
Link: http://lkml.kernel.org/r/158029060405.12381.11944554430359702545.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The trace_array_get_by_name() creates a ftrace instance and
trace_array_put() is used to remove the reference. Even though the
trace_array_get_by_name() creates the instance, it also adds a reference
count to it, that prevents user space from removing it.
As the bootconfig just creates the instance on boot up, it should still be
used where it can be deleted by user space after boot. A trace_array_put()
is required to let that happen.
Also, change the documentation on trace_array_get_by_name() to make this not
be so confusing.
Link: https://lore.kernel.org/r/20200124205927.76128804@rorschach.local.home
Fixes: 4f712a4d04 ("tracing/boot: Add instance node support")
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add below function-tracer filter options to boot-time tracing.
- ftrace.[instance.INSTANCE.]ftrace.filters
This will take an array of tracing function filter rules
- ftrace.[instance.INSTANCE.]ftrace.notraces
This will take an array of NON-tracing function filter rules
Link: http://lkml.kernel.org/r/157867244841.17873.10933616628243103561.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add ftrace.cpumask option support to boot-time tracing.
This sets cpumask for each instance.
- ftrace.[instance.INSTANCE.]cpumask = CPUMASK;
Set the trace cpumask. Note that the CPUMASK should be a string
which <tracefs>/tracing_cpumask can accepts.
Link: http://lkml.kernel.org/r/157867243625.17873.13613922641273149372.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add instance node support to boot-time tracing. User can set
some options and event nodes under instance node.
- ftrace.instance.INSTANCE[...]
Add new INSTANCE instance. Some options and event nodes
are acceptable for instance node.
Link: http://lkml.kernel.org/r/157867242413.17873.9814204526141500278.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add synthetic event node support to boot time tracing.
The synthetic event is a kind of event node, but the group
name is "synthetic".
- ftrace.event.synthetic.EVENT.fields = FIELD[, FIELD2...]
Defines new synthetic event with FIELDs. Each field should be
"type varname".
The synthetic node requires "fields" string arraies, which defines
the fields as same as tracing/synth_events interface.
Link: http://lkml.kernel.org/r/157867241236.17873.12411615143321557709.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add kprobe event support on event node to boot-time tracing.
If the group name of event is "kprobes", the boot-time tracing
defines new probe event according to "probes" values.
- ftrace.event.kprobes.EVENT.probes = PROBE[, PROBE2...]
Defines new kprobe event based on PROBEs. It is able to define
multiple probes on one event, but those must have same type of
arguments.
For example,
ftrace.events.kprobes.myevent {
probes = "vfs_read $arg1 $arg2";
enable;
}
This will add kprobes:myevent on vfs_read with the 1st and the 2nd
arguments.
Link: http://lkml.kernel.org/r/157867240104.17873.9712052065426433111.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add per-event settings for boottime tracing. User can set filter,
actions and enable on each event on boot. The event entries are
under ftrace.event.GROUP.EVENT node (note that the option key
includes event's group name and event name.) This supports below
configs.
- ftrace.event.GROUP.EVENT.enable
Enables GROUP:EVENT tracing.
- ftrace.event.GROUP.EVENT.filter = FILTER
Set FILTER rule to the GROUP:EVENT.
- ftrace.event.GROUP.EVENT.actions = ACTION[, ACTION2...]
Set ACTIONs to the GROUP:EVENT.
For example,
ftrace.event.sched.sched_process_exec {
filter = "pid < 128"
enable
}
this will enable tracing "sched:sched_process_exec" event
with "pid < 128" filter.
Link: http://lkml.kernel.org/r/157867238942.17873.11177628789184546198.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Setup tracing options via extra boot config in addition to kernel
command line.
This adds following commands support. These are applied to
the global trace instance.
- ftrace.options = OPT1[,OPT2...]
Enable given ftrace options.
- ftrace.trace_clock = CLOCK
Set given CLOCK to ftrace's trace_clock.
- ftrace.buffer_size = SIZE
Configure ftrace buffer size to SIZE. You can use "KB" or "MB"
for that SIZE.
- ftrace.events = EVENT[, EVENT2...]
Enable given events on boot. You can use a wild card in EVENT.
- ftrace.tracer = TRACER
Set TRACER to current tracer on boot. (e.g. function)
Note that this is NOT replacing the kernel parameters, because
this boot config based setting is later than that. If you want to
trace earlier boot events, you still need kernel parameters.
Link: http://lkml.kernel.org/r/157867237723.17873.17494943526320587488.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The boot tracer is useless. It simply logs the initcalls
but in fact these initcalls are also logged through printk
while using the initcall_debug kernel parameter.
Nobody seem to be using it so far. Then just remove it.
Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com>
Cc: Chase Douglas <chase.douglas@canonical.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <20100526105753.GA5677@cr0.nay.redhat.com>
[ remove the hooks in main.c, and the headers ]
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Now that the pluging tracers use macros to create the structures and
automate the exporting of their formats to the format files, they also
automatically get a filter file.
This patch adds the code to implement the filter logic in the trace
recordings.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The latency tracers (irqsoff and wakeup) can swap trace buffers
on the fly. If an event is happening and has reserved data on one of
the buffers, and the latency tracer swaps the global buffer with the
max buffer, the result is that the event may commit the data to the
wrong buffer.
This patch changes the API to the trace recording to be recieve the
buffer that was used to reserve a commit. Then this buffer can be passed
in to the commit.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The function tracing_reset is deprecated for outside use of trace.c.
The new function to reset the the buffers is tracing_reset_online_cpus.
The reason for this is that resetting the buffers while the event
trace points are active can corrupt the buffers, because they may
be writing at the time of reset. The tracing_reset_online_cpus disables
writes and waits for current writers to finish.
This patch replaces all users of tracing_reset except for the latency
tracers. Those changes require more work and will be removed in the
following patches.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Impact: cleanup
Use USEC_PER_SEC and NSEC_PER_SEC instead of 1000000 and 1000000000.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <49CC7870.9000309@cn.fujitsu.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Impact: new API
These new functions do what previously was being open coded, reducing
the number of details ftrace plugin writers have to worry about.
It also standardizes the handling of stacktrace, userstacktrace and
other trace options we may introduce in the future.
With this patch, for instance, the blk tracer (and some others already
in the tree) can use the "userstacktrace" /d/tracing/trace_options
facility.
$ codiff /tmp/vmlinux.before /tmp/vmlinux.after
linux-2.6-tip/kernel/trace/trace.c:
trace_vprintk | -5
trace_graph_return | -22
trace_graph_entry | -26
trace_function | -45
__ftrace_trace_stack | -27
ftrace_trace_userstack | -29
tracing_sched_switch_trace | -66
tracing_stop | +1
trace_seq_to_user | -1
ftrace_trace_special | -63
ftrace_special | +1
tracing_sched_wakeup_trace | -70
tracing_reset_online_cpus | -1
13 functions changed, 2 bytes added, 355 bytes removed, diff: -353
linux-2.6-tip/block/blktrace.c:
__blk_add_trace | -58
1 function changed, 58 bytes removed, diff: -58
linux-2.6-tip/kernel/trace/trace.c:
trace_buffer_lock_reserve | +88
trace_buffer_unlock_commit | +86
2 functions changed, 174 bytes added, diff: +174
/tmp/vmlinux.after:
16 functions changed, 176 bytes added, 413 bytes removed, diff: -237
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Frédéric Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Now that we have a working ftrace=<tracer> function, make the boot
tracer get activated by it. This way we can turn it on or off without
recompiling the kernel, as well as keeping the selftests on. The
selftests are disabled whenever a default tracer starts running.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: Reduce future memory usage, use new cpumask API.
Since the last patch was created and acked, more old cpumask users
slipped into kernel/trace.
Mostly trivial conversions, except struct trace_iterator's "started"
member becomes a cpumask_var_t.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Impact: simplify/generalize/refactor trace.c
The trace.c file is becoming more difficult to maintain due to the
growing number of events. There is several formats that an event may
be printed. This patch sets up the infrastructure of an event hash to
allow for events to register how they should be printed.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
This patch factors out common code from multiple tracers into a
tracing_reset_online_cpus() function and converts the tracers to use it.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: extend the ->init() method with the ability to fail
This bring a way to know if the initialization of a tracer successed.
A tracer must return 0 on success and a traditional error (ie:
-ENOMEM) if it fails.
If a tracer fails to init, it is free to print a detailed warn. The
tracing api will not and switch to a new tracer will just return the
error from the init callback.
Note: this will be used for the return tracer.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: Remove the ctrl_update tracer method
With the new quick start/stop method of tracing, the ctrl_update
method is out of date.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix for sched_switch that broke dynamic ftrace startup
The commit: tracing/fastboot: use sched switch tracer from boot tracer
broke the API of the sched_switch trace. The use of the
tracing_start/stop_cmdline record is for only recording the cmdline,
NOT recording the schedule switches themselves.
Seeing that the boot tracer broke the API to do something that it
wanted, this patch adds a new interface for the API while
puting back the original interface of the old API.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: boot tracer startup modified
The boot tracer calls into some of the schedule tracing private functions
that should not be exported. This patch cleans it up, and makes
way for further changes in the ftrace infrastructure.
This patch adds a api to assign a tracer array to the schedule
context switch tracer.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix boot tracer + sched tracer coupling bug
Fix a bug that made the sched_switch tracer unable to run
if set as the current_tracer after the boot tracer.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: enhance boot trace output with scheduling events
Use the sched_switch tracer from the boot tracer.
We also can trace schedule events inside the initcalls.
Sched tracing is disabled after the initcall has finished and
then reenabled before the next one is started.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: modify boot tracer
We used to disable the initcall tracing at a specified time (IE: end
of builtin initcalls). But we don't need it anymore. It will be
stopped when initcalls are finished.
However we want two things:
_Start this tracing only after pre-smp initcalls are finished.
_Since we are planning to trace sched_switches at the same time, we
want to enable them only during the initcall execution.
For this purpose, this patch introduce two functions to enable/disable
the sched_switch tracing during boot.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When printing nanoseconds, the right printk format string is %09 not %06...
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Frédéric Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
At this time, only built-in initcalls interest us.
We can't really produce a relevant graph if we include
the modules initcall too.
I had good results after this patch (see svg in attachment).
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
After some initcall traces, some initcall names may be inconsistent.
That's because these functions will disappear from the .init section
and also their name from the symbols table.
So we have to copy the name of the function in a buffer large enough
during the trace appending. It is not costly for the ring_buffer because
the number of initcall entries is commonly not really large.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Change the boot tracer printing to make it parsable for
the scripts/bootgraph.pl script.
We have now to output two lines for each initcall, according to the
printk in do_one_initcall() in init/main.c
We need now the call's time and the return's time.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
With the new ring buffer infrastructure in ftrace, I'm trying to make
ftrace a little more light weight.
This patch converts a lot of the local_irq_save/restore into
preempt_disable/enable. The original preempt count in a lot of cases
has to be sent in as a parameter so that it can be recorded correctly.
Some places were recording it incorrectly before anyway.
This is also laying the ground work to make ftrace a little bit
more reentrant, and remove all locking. The function tracers must
still protect from reentrancy.
Note: All the function tracers must be careful when using preempt_disable.
It must do the following:
resched = need_resched();
preempt_disable_notrace();
[...]
if (resched)
preempt_enable_no_resched_notrace();
else
preempt_enable_notrace();
The reason is that if this function traces schedule() itself, the
preempt_enable_notrace() will cause a schedule, which will lead
us into a recursive failure.
If we needed to reschedule before calling preempt_disable, we
should have already scheduled. Since we did not, this is most
likely that we should not and are probably inside a schedule
function.
If resched was not set, we still need to catch the need resched
flag being set when preemption was off and the if case at the
end will catch that for us.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch adapts the boot tracer to the new type of the
print_line callback.
It still relays entries it doesn't support to default output
functions.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Pekka Paalanen <pq@iki.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Now that the underlining ring buffer for ftrace now hold variable length
entries, we can take advantage of this by only storing the size of the
actual event into the buffer. This happens to increase the number of
entries in the buffer dramatically.
We can also get rid of the "trace_cont" operation, but I'm keeping that
until we have no more users. Some of the ftrace tracers can now change
their code to adapt to this new feature.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When the boot tracer can't handle an entry output, it returns 1.
It should return 0 to relay on other output functions.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add the boot/initcall tracer.
It's primary purpose is to be able to trace the initcalls.
It is intended to be used with scripts/bootgraph.pl after some small
improvements.
Note that it is not active after its init. To avoid tracing (and so
crashing) before the whole tracing engine init, you have to explicitly
call start_boot_trace() after do_pre_smp_initcalls() to enable it.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
