Offset calculation wasn't correct as start addresses are in pfn
not in bytes.
CC: stable@vger.kernel.org
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Correct the check for vblank short.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
pm_runtime_put_suppliers() must not decrement rpm_active unless the
consumer is suspended. That is because, otherwise, it could suspend
suppliers for an active consumer.
That can happen as follows:
static int driver_probe_device(struct device_driver *drv, struct device *dev)
{
int ret = 0;
if (!device_is_registered(dev))
return -ENODEV;
dev->can_match = true;
pr_debug("bus: '%s': %s: matched device %s with driver %s\n",
drv->bus->name, __func__, dev_name(dev), drv->name);
pm_runtime_get_suppliers(dev);
if (dev->parent)
pm_runtime_get_sync(dev->parent);
At this point, dev can runtime suspend so rpm_put_suppliers() can run,
rpm_active becomes 1 (the lowest value).
pm_runtime_barrier(dev);
if (initcall_debug)
ret = really_probe_debug(dev, drv);
else
ret = really_probe(dev, drv);
Probe callback can have runtime resumed dev, and then runtime put
so dev is awaiting autosuspend, but rpm_active is 2.
pm_request_idle(dev);
if (dev->parent)
pm_runtime_put(dev->parent);
pm_runtime_put_suppliers(dev);
Now pm_runtime_put_suppliers() will put the supplier
i.e. rpm_active 2 -> 1, but consumer can still be active.
return ret;
}
Fix by checking the runtime status. For any status other than
RPM_SUSPENDED, rpm_active can be considered to be "owned" by
rpm_[get/put]_suppliers() and pm_runtime_put_suppliers() need do nothing.
Reported-by: Asutosh Das <asutoshd@codeaurora.org>
Fixes: 4c06c4e6cf ("driver core: Fix possible supplier PM-usage counter imbalance")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: 5.1+ <stable@vger.kernel.org> # 5.1+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
rpm_active indicates how many times the supplier usage_count has been
incremented. Consequently it must be updated after pm_runtime_get_sync() of
the supplier, not before.
Fixes: 4c06c4e6cf ("driver core: Fix possible supplier PM-usage counter imbalance")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: 5.1+ <stable@vger.kernel.org> # 5.1+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The following problem has been reported by George Kennedy:
Since commit 7fef431be9 ("mm/page_alloc: place pages to tail
in __free_pages_core()") the following use after free occurs
intermittently when ACPI tables are accessed.
BUG: KASAN: use-after-free in ibft_init+0x134/0xc49
Read of size 4 at addr ffff8880be453004 by task swapper/0/1
CPU: 3 PID: 1 Comm: swapper/0 Not tainted 5.12.0-rc1-7a7fd0d #1
Call Trace:
dump_stack+0xf6/0x158
print_address_description.constprop.9+0x41/0x60
kasan_report.cold.14+0x7b/0xd4
__asan_report_load_n_noabort+0xf/0x20
ibft_init+0x134/0xc49
do_one_initcall+0xc4/0x3e0
kernel_init_freeable+0x5af/0x66b
kernel_init+0x16/0x1d0
ret_from_fork+0x22/0x30
ACPI tables mapped via kmap() do not have their mapped pages
reserved and the pages can be "stolen" by the buddy allocator.
Apparently, on the affected system, the ACPI table in question is
not located in "reserved" memory, like ACPI NVS or ACPI Data, that
will not be used by the buddy allocator, so the memory occupied by
that table has to be explicitly reserved to prevent the buddy
allocator from using it.
In order to address this problem, rearrange the initialization of the
ACPI tables on x86 to locate the initial tables earlier and reserve
the memory occupied by them.
The other architectures using ACPI should not be affected by this
change.
Link: https://lore.kernel.org/linux-acpi/1614802160-29362-1-git-send-email-george.kennedy@oracle.com/
Reported-by: George Kennedy <george.kennedy@oracle.com>
Tested-by: George Kennedy <george.kennedy@oracle.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: 5.10+ <stable@vger.kernel.org> # 5.10+
general protection fault, probably for non-canonical address
0xdffffc0000000018: 0000 [#1] KASAN: null-ptr-deref
in range [0x00000000000000c0-0x00000000000000c7]
RIP: 0010:io_commit_cqring+0x37f/0xc10 fs/io_uring.c:1318
Call Trace:
io_kill_timeouts+0x2b5/0x320 fs/io_uring.c:8606
io_ring_ctx_wait_and_kill+0x1da/0x400 fs/io_uring.c:8629
io_uring_create fs/io_uring.c:9572 [inline]
io_uring_setup+0x10da/0x2ae0 fs/io_uring.c:9599
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xae
It can get into wait_and_kill() before setting up ctx->rings, and hence
io_commit_cqring() fails. Mimic poll cancel and do it only when we
completed events, there can't be any requests if it failed before
initialising rings.
Fixes: 80c4cbdb5e ("io_uring: do post-completion chore on t-out cancel")
Reported-by: syzbot+0e905eb8228070c457a0@syzkaller.appspotmail.com
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/660261a48f0e7abf260c8e43c87edab3c16736fa.1617014345.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Logitech ConferenceCam Connect is a compound USB device with UVC and
UAC. Not 100% reproducible but sometimes it keeps responding STALL to
every control transfer once it receives get_freq request.
This patch adds 046d:0x084c to a snd_usb_get_sample_rate_quirk list.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203419
Signed-off-by: Ikjoon Jang <ikjn@chromium.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210324105153.2322881-1-ikjn@chromium.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Always try to do cancellation in __io_uring_task_cancel() at least once,
so it actually goes and cleans its sqpoll tasks (i.e. via
io_sqpoll_cancel_sync()), otherwise sqpoll task may submit new requests
after cancellation and it's racy for many reasons.
Fixes: 521d6a737a ("io_uring: cancel sqpoll via task_work")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/0a21bd6d794bb1629bc906dd57a57b2c2985a8ac.1616839147.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
- Avoid write of uninitialized memory when generating PERF_RECORD_MMAP* records.
- Fix 'perf top' BPF support related crash with perf_event_paranoid=3 + kptr_restrict.
- Validate raw event with sysfs exported format bits.
- Fix waipid on SIGCHLD delivery bugs in 'perf daemon'.
- Change to use bash for daemon test on Debian, where the default is dash and
thus fails for use of bashisms in this test.
- Fix memory leak in vDSO found using ASAN.
- Remove now useless (due to the fact taht BPF now supports static vars)
failing sub test "BPF relocation checker".
- Fix auxtrace queue conflict.
- Sync linux/kvm.h with the kernel sources.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCYGDHswAKCRCyPKLppCJ+
J765AQDJNsaxs3RximgY503X6pguLSrMY/uBq9XB2uYCeM3xRgEA1h4nIFCOE06V
s/kOphsfgbUu2UTD1rtCM2olZRzS1AU=
=kpj/
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v5.12-2020-03-28' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tooling fixes from Arnaldo Carvalho de Melo:
- Avoid write of uninitialized memory when generating PERF_RECORD_MMAP*
records.
- Fix 'perf top' BPF support related crash with perf_event_paranoid=3 +
kptr_restrict.
- Validate raw event with sysfs exported format bits.
- Fix waipid on SIGCHLD delivery bugs in 'perf daemon'.
- Change to use bash for daemon test on Debian, where the default is
dash and thus fails for use of bashisms in this test.
- Fix memory leak in vDSO found using ASAN.
- Remove now useless (due to the fact that BPF now supports static
vars) failing sub test "BPF relocation checker".
- Fix auxtrace queue conflict.
- Sync linux/kvm.h with the kernel sources.
* tag 'perf-tools-fixes-for-v5.12-2020-03-28' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf test: Change to use bash for daemon test
perf record: Fix memory leak in vDSO found using ASAN
perf test: Remove now useless failing sub test "BPF relocation checker"
perf daemon: Return from kill functions
perf daemon: Force waipid for all session on SIGCHLD delivery
perf top: Fix BPF support related crash with perf_event_paranoid=3 + kptr_restrict
perf pmu: Validate raw event with sysfs exported format bits
perf synthetic events: Avoid write of uninitialized memory when generating PERF_RECORD_MMAP* records
tools headers UAPI: Sync linux/kvm.h with the kernel sources
perf synthetic-events: Fix uninitialized 'kernel_thread' variable
perf auxtrace: Fix auxtrace queue conflict
- Fix build failure on Ubuntu with new GCC packages that turn on -fcf-protection
- Fix SME memory encryption PTE encoding bug - AFAICT the code worked on
4K page sizes (level 1) but had the wrong shift at higher page level orders
(level 2 and higher).
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=tM9n
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2021-03-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Two fixes:
- Fix build failure on Ubuntu with new GCC packages that turn
on -fcf-protection
- Fix SME memory encryption PTE encoding bug - AFAICT the code
worked on 4K page sizes (level 1) but had the wrong shift at
higher page level orders (level 2 and higher)"
* tag 'x86-urgent-2021-03-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/build: Turn off -fcf-protection for realmode targets
x86/mem_encrypt: Correct physical address calculation in __set_clr_pte_enc()
Right now nothing uses this API explicitly, but this is an accident waiting to happen.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=NgW4
-----END PGP SIGNATURE-----
Merge tag 'locking-urgent-2021-03-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fix from Ingo Molnar:
"Fix the non-debug mutex_lock_io_nested() method to map to
mutex_lock_io() instead of mutex_lock().
Right now nothing uses this API explicitly, but this is an
accident waiting to happen"
* tag 'locking-urgent-2021-03-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/mutex: Fix non debug version of mutex_lock_io_nested()
-----BEGIN PGP SIGNATURE-----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=NxLV
-----END PGP SIGNATURE-----
Merge tag '5.12-rc4-smb3' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Five cifs/smb3 fixes, two for stable.
Includes an important fix for encryption and an ACL fix, as well as a
fix for possible reflink data corruption"
* tag '5.12-rc4-smb3' of git://git.samba.org/sfrench/cifs-2.6:
smb3: fix cached file size problems in duplicate extents (reflink)
cifs: Silently ignore unknown oplock break handle
cifs: revalidate mapping when we open files for SMB1 POSIX
cifs: Fix chmod with modefromsid when an older ACE already exists.
cifs: Adjust key sizes and key generation routines for AES256 encryption
-----BEGIN PGP SIGNATURE-----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=mwLC
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.12-2021-03-27' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
- Use thread info versions of flag testing, as discussed last week.
- The series enabling PF_IO_WORKER to just take signals, instead of
needing to special case that they do not in a bunch of places. Ends
up being pretty trivial to do, and then we can revert all the special
casing we're currently doing.
- Kill dead pointer assignment
- Fix hashed part of async work queue trace
- Fix sign extension issue for IORING_OP_PROVIDE_BUFFERS
- Fix a link completion ordering regression in this merge window
- Cancellation fixes
* tag 'io_uring-5.12-2021-03-27' of git://git.kernel.dk/linux-block:
io_uring: remove unsued assignment to pointer io
io_uring: don't cancel extra on files match
io_uring: don't cancel-track common timeouts
io_uring: do post-completion chore on t-out cancel
io_uring: fix timeout cancel return code
Revert "signal: don't allow STOP on PF_IO_WORKER threads"
Revert "kernel: freezer should treat PF_IO_WORKER like PF_KTHREAD for freezing"
Revert "kernel: treat PF_IO_WORKER like PF_KTHREAD for ptrace/signals"
Revert "signal: don't allow sending any signals to PF_IO_WORKER threads"
kernel: stop masking signals in create_io_thread()
io_uring: handle signals for IO threads like a normal thread
kernel: don't call do_exit() for PF_IO_WORKER threads
io_uring: maintain CQE order of a failed link
io-wq: fix race around pending work on teardown
io_uring: do ctx sqd ejection in a clear context
io_uring: fix provide_buffers sign extension
io_uring: don't skip file_end_write() on reissue
io_uring: correct io_queue_async_work() traces
io_uring: don't use {test,clear}_tsk_thread_flag() for current
-----BEGIN PGP SIGNATURE-----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=ZaB3
-----END PGP SIGNATURE-----
Merge tag 'block-5.12-2021-03-27' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- Fix regression from this merge window with the xarray partition
change, which allowed partition counts that overflow the u8 that
holds the partition number (Ming)
- Fix zone append warning (Johannes)
- Segmentation count fix for multipage bvecs (David)
- Partition scan fix (Chris)
* tag 'block-5.12-2021-03-27' of git://git.kernel.dk/linux-block:
block: don't create too many partitions
block: support zone append bvecs
block: recalculate segment count for multi-segment discards correctly
block: clear GD_NEED_PART_SCAN later in bdev_disk_changed
Seven fixes, all in drivers (qla2xxx, mkt3sas, qedi, target,
ibmvscsi). The most serious are the target pscsi oom and the qla2xxx
revert which can otherwise cause a use after free.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYF/V2yYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pisha+AAQCSO7Wv
Wshi7H9N8SQUJO9EcmkrSApGDtjHUfZYlnse0AD/UhbpCSzSEPzI23lfduMB3QTa
o5wmwHEIG8ULneB57vE=
=f44O
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Seven fixes, all in drivers (qla2xxx, mkt3sas, qedi, target,
ibmvscsi).
The most serious are the target pscsi oom and the qla2xxx revert which
can otherwise cause a use after free"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: target: pscsi: Clean up after failure in pscsi_map_sg()
scsi: target: pscsi: Avoid OOM in pscsi_map_sg()
scsi: mpt3sas: Fix error return code of mpt3sas_base_attach()
scsi: qedi: Fix error return code of qedi_alloc_global_queues()
scsi: Revert "qla2xxx: Make sure that aborted commands are freed"
scsi: ibmvfc: Make ibmvfc_wait_for_ops() MQ aware
scsi: ibmvfc: Fix potential race in ibmvfc_wait_for_ops()
Add a backup for s390 vfio-pci, an additional backup for vfio-ccw
and replace the backup for vfio-ap as Pierre is focusing on other
areas.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Acked-by: Eric Farman <farman@linux.ibm.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Acked-by: Pierre Morel <pmorel@linux.ibm.com>
Acked-by: Jason J. Herne <jjherne@linux.ibm.com>
Link: https://lore.kernel.org/r/1616679712-7139-1-git-send-email-mjrosato@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Since commit 3bfe610669 ("io-wq: fork worker threads from original
task") stopped using PF_KTHREAD flag for the io_uring PF_IO_WORKER threads,
tomoyo_kernel_service() no longer needs to check PF_IO_WORKER flag.
(This is a 5.12+ patch. Please don't send to stable kernels.)
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
There is an assignment to io that is never read after the assignment,
the assignment is redundant and can be removed.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
As tasks always wait and kill their io-wq on exec/exit, files are of no
more concern to us, so we don't need to specifically cancel them by hand
in those cases. Moreover we should not, because io_match_task() looks at
req->task->files now, which is always true and so leads to extra
cancellations, that wasn't a case before per-task io-wq.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/0566c1de9b9dd417f5de345c817ca953580e0e2e.1616696997.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Don't forget about io_commit_cqring() + io_cqring_ev_posted() after
exit/exec cancelling timeouts. Both functions declared only after
io_kill_timeouts(), so to avoid tons of forward declarations move
it down.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/72ace588772c0f14834a6a4185d56c445a366fb4.1616696997.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This reverts commit 4db4b1a0d1.
The IO threads allow and handle SIGSTOP now, so don't special case them
anymore in task_set_jobctl_pending().
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This reverts commit 15b2219fac.
Before IO threads accepted signals, the freezer using take signals to wake
up an IO thread would cause them to loop without any way to clear the
pending signal. That is no longer the case, so stop special casing
PF_IO_WORKER in the freezer.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This reverts commit 6fb8f43ced.
The IO threads do allow signals now, including SIGSTOP, and we can allow
ptrace attach. Attaching won't reveal anything interesting for the IO
threads, but it will allow eg gdb to attach to a task with io_urings
and IO threads without complaining. And once attached, it will allow
the usual introspection into regular threads.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This reverts commit 5be28c8f85.
IO threads now take signals just fine, so there's no reason to limit them
specifically. Revert the change that prevented that from happening.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is racy - move the blocking into when the task is created and
we're marking it as PF_IO_WORKER anyway. The IO threads are now
prepared to handle signals like SIGSTOP as well, so clear that from
the mask to allow proper stopping of IO threads.
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Reported-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We go through various hoops to disallow signals for the IO threads, but
there's really no reason why we cannot just allow them. The IO threads
never return to userspace like a normal thread, and hence don't go through
normal signal processing. Instead, just check for a pending signal as part
of the work loop, and call get_signal() to handle it for us if anything
is pending.
With that, we can support receiving signals, including special ones like
SIGSTOP.
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit a33df75c63 ("block: use an xarray for disk->part_tbl") drops the
check on max supported number of partitionsr, and allows partition with
bigger partition numbers to be added. However, ->bd_partno is defined as
u8, so partition index of xarray table may not match with ->bd_partno.
Then delete_partition() may delete one unmatched partition, and caused
use-after-free.
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reported-by: syzbot+8fede7e30c7cee0de139@syzkaller.appspotmail.com
Fixes: a33df75c63 ("block: use an xarray for disk->part_tbl")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This contains a few tiny drivers and core fixes that have been
reported during this cycle.
- msm8939: Remove rpm-ids from non-RPM nodes
- core: Fix error return code of icc_link_destroy()
- core: Fix kerneldoc warning
Signed-off-by: Georgi Djakov <djakov@kernel.org>
-----BEGIN PGP SIGNATURE-----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=sVSJ
-----END PGP SIGNATURE-----
Merge tag 'icc-5.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-linus
Georgi writes:
interconnect fixes for v5.12
This contains a few tiny drivers and core fixes that have been
reported during this cycle.
- msm8939: Remove rpm-ids from non-RPM nodes
- core: Fix error return code of icc_link_destroy()
- core: Fix kerneldoc warning
Signed-off-by: Georgi Djakov <djakov@kernel.org>
* tag 'icc-5.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
interconnect: Fix kerneldoc warning
interconnect: core: fix error return code of icc_link_destroy()
interconnect: qcom: msm8939: remove rpm-ids from non-RPM nodes
Richard's fix addresses an errornously flipped flag.
All patches have been reviewed on the mailing list, and have been in the
last few linux-next releases (as part of my fixes branch) without issues.
Signed-off-by: Moritz Fischer <mdf@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRORt0E5Sb/c/mZMgkXxQAtim5VSwUCYF4PkAAKCRAXxQAtim5V
S/f/AP0dbguLsIwo8nFYsFi8xLlpodl/hD8ZC3+WEWYkbF0DtgEAuFhs4Oa2cUBo
4gnV+POdy0/UlIRz6z6aBfzsJTsJkg4=
=/Cw4
-----END PGP SIGNATURE-----
Merge tag 'fpga-fixes-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga into char-misc-linus
Moritz writes:
FPGA Manager fixes for 5.12
Richard's fix addresses an errornously flipped flag.
All patches have been reviewed on the mailing list, and have been in the
last few linux-next releases (as part of my fixes branch) without issues.
Signed-off-by: Moritz Fischer <mdf@kernel.org>
* tag 'fpga-fixes-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga:
firmware: stratix10-svc: reset COMMAND_RECONFIG_FLAG_PARTIAL to 0
There were two problems (one of which could cause data corruption)
that were noticed with duplicate extents (ie reflink)
when debugging why various xfstests were being incorrectly skipped
(e.g. generic/138, generic/140, generic/142). First, we were not
updating the file size locally in the cache when extending a
file due to reflink (it would refresh after actimeo expires)
but xfstest was checking the size immediately which was still
0 so caused the test to be skipped. Second, we were setting
the target file size (which could shrink the file) in all cases
to the end of the reflinked range rather than only setting the
target file size when reflink would extend the file.
CC: <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Make SMB2 not print out an error when an oplock break is received for an
unknown handle, similar to SMB1. The debug message which is printed for
these unknown handles may also be misleading, so fix that too.
The SMB2 lease break path is not affected by this patch.
Without this, a program which writes to a file from one thread, and
opens, reads, and writes the same file from another thread triggers the
below errors several times a minute when run against a Samba server
configured with "smb2 leases = no".
CIFS: VFS: \\192.168.0.1 No task to wake, unknown frame received! NumMids 2
00000000: 424d53fe 00000040 00000000 00000012 .SMB@...........
00000010: 00000001 00000000 ffffffff ffffffff ................
00000020: 00000000 00000000 00000000 00000000 ................
00000030: 00000000 00000000 00000000 00000000 ................
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Reviewed-by: Tom Talpey <tom@talpey.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
RHBZ: 1933527
Under SMB1 + POSIX, if an inode is reused on a server after we have read and
cached a part of a file, when we then open the new file with the
re-cycled inode there is a chance that we may serve the old data out of cache
to the application.
This only happens for SMB1 (deprecated) and when posix are used.
The simplest solution to avoid this race is to force a revalidate
on smb1-posix open.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
My recent fixes to cifsacl to maintain inherited ACEs had
regressed modefromsid when an older ACL already exists.
Found testing xfstest 495 with modefromsid mount option
Fixes: f506550889 ("cifs: Retain old ACEs when converting between mode bits and ACL")
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Right now we're never calling get_signal() from PF_IO_WORKER threads, but
in preparation for doing so, don't handle a fatal signal for them. The
workers have state they need to cleanup when exiting, so just return
instead of calling do_exit() on their behalf. The threads themselves will
detect a fatal signal and do proper shutdown.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
- Fix DM core's zoned model and zone sectors checks.
- Fix spurious "detected capacity change" pr_info() when creating new
DM device.
- Fix DM ioctl out of bounds array access in handling of
DM_LIST_DEVICES_CMD when no devices exist.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAmBeMf0THHNuaXR6ZXJA
cmVkaGF0LmNvbQAKCRDFI/EKLZ0DWlr1B/9Jh6YUtTe1dN5rCEPheikFwcsDgoYk
zfgeS57GHv/rzQ9hdVPBqHvc4ZjEZ7hLkV8Pa0eyyDnslwHfH/B8/38LVSdOe1QK
52787CXTAcBHjnEzGbs2TP2oGhHQ4rN9h6lMKzs3jcglWunutHKnesAXGC3yItsr
WzYzskiL/gpS+Px936JVVjJirzKFX1jnbXZ4BMq3/7vqu5DJ8M+2mrf4H1wxfIMP
NeV40j4vAkqJKbQyVFYfzRdXxP+FswR9kLHQv96RW0y98JDg7h5TtYGrAaRZdpRw
HQ+96/dZWyH2MpJ5nptSIVbU71u9EtLuRCa5HhB903p14NQsrR0qGBfc
=YT+2
-----END PGP SIGNATURE-----
Merge tag 'for-5.12/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Fix DM verity target's optional argument processing.
- Fix DM core's zoned model and zone sectors checks.
- Fix spurious "detected capacity change" pr_info() when creating new
DM device.
- Fix DM ioctl out of bounds array access in handling of
DM_LIST_DEVICES_CMD when no devices exist.
* tag 'for-5.12/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm ioctl: fix out of bounds array access when no devices
dm: don't report "detected capacity change" on device creation
dm table: Fix zoned model check and zone sectors check
dm verity: fix DM_VERITY_OPTS_MAX value
If there are not any dm devices, we need to zero the "dev" argument in
the first structure dm_name_list. However, this can cause out of
bounds write, because the "needed" variable is zero and len may be
less than eight.
Fix this bug by reporting DM_BUFFER_FULL_FLAG if the result buffer is
too small to hold the "nl->dev" value.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
- Make ACPICA use the same object cache consistently when allocating
and freeing objects (Vegard Nossum).
- Add a callback pointer removed inadvertently during the 5.11 cycle
to the ACPI backlight blacklist entry for Sony VPCEH3U1E (Chris
Chiu).
- Make the ACPI device enumeration core use IDA for creating names of
ACPI device objects with the same primary device ID to avoid using
duplicate device object names in some cases (Andy Shevchenko).
-----BEGIN PGP SIGNATURE-----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=Wi4B
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix a memory management regression in ACPICA, repair an ACPI
blacklist entry damaged inadvertently during the 5.11 cycle and fix
the bookkeeping of devices with the same primary device ID in the ACPI
core.
Specifics:
- Make ACPICA use the same object cache consistently when allocating
and freeing objects (Vegard Nossum)
- Add a callback pointer removed inadvertently during the 5.11 cycle
to the ACPI backlight blacklist entry for Sony VPCEH3U1E (Chris
Chiu)
- Make the ACPI device enumeration core use IDA for creating names of
ACPI device objects with the same primary device ID to avoid using
duplicate device object names in some cases (Andy Shevchenko)"
* tag 'acpi-5.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPICA: Always create namespace nodes using acpi_ns_create_node()
ACPI: scan: Use unique number for instance_no
ACPI: video: Add missing callback back for Sony VPCEH3U1E
- Modify the runtime PM device suspend to avoid suspending
supplier devices before the consumer device's status changes
to RPM_SUSPENDED (Rafael Wysocki).
- Change the Energy Model code to prevent it from attempting to
create its main debugfs directory too early (Lukasz Luba).
-----BEGIN PGP SIGNATURE-----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=9csw
-----END PGP SIGNATURE-----
Merge tag 'pm-5.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix an issue related to device links in the runtime PM framework
and debugfs usage in the Energy Model code.
Specifics:
- Modify the runtime PM device suspend to avoid suspending supplier
devices before the consumer device's status changes to
RPM_SUSPENDED (Rafael Wysocki)
- Change the Energy Model code to prevent it from attempting to
create its main debugfs directory too early (Lukasz Luba)"
* tag 'pm-5.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: EM: postpone creating the debugfs dir till fs_initcall
PM: runtime: Defer suspending suppliers
Too many fixes have accumulated in the soc tree, so this is a fairly
large set. As usual, most of the fixes are for devicetree files, but
there are also notable code changes for imx and omap regressions as
well as some maintainer file updates.
imx:
- Fix an Ethernet issue on imx6ul-14x14-evk board that is caused by
independent PHY reset.
- Add missing `dma-coherent` property for LayerScape device trees to fix a
kernel BUG report.
- Use IRQCHIP_DECLARE for AVIC driver to fix a boot issue on i.MX25 with
fw_devlink=on.
- Add missing I2C pinctrl entry for imx8mp-phyboard-pollux-rdk board to
fix the broken I2C GPIO recovery support.
- Add `fsl,use-minimum-ecc` property for imx6ull-myir-mys-6ulx-eval
device tree to fix UBI filesystem mount failure.
at91:
- wrong phy address that blocks Ethernet use on boards with sama5d27 SoM1
- restrictive pin possibilities for sam9x60
omap:
- Fix ocp interconnect bus access error reporting for omap_l3_noc by
setting IRQF_NO_THREAD
- Fix changed mmc slot order regression by adding mmc aliases for am335x
- Fix dra7 reboot regression caused by invalid pcie reset map
- Fix smartreflex init regression caused by dropped legacy data
- Fix ti-sysc driver warning on unbind if reset is not deasserted
- Fix flakey reset deassert for dra7 iva
stm32:
- MAINTAINER file updates
broadcom:
- brcmstb SoC ID build fix
- MAINTAINER file updates
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=LBps
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"Too many fixes have accumulated in the soc tree, so this is a fairly
large set. As usual, most of the fixes are for devicetree files, but
there are also notable code changes for imx and omap regressions as
well as some maintainer file updates.
imx:
- Fix an Ethernet issue on imx6ul-14x14-evk board that is caused by
independent PHY reset.
- Add missing `dma-coherent` property for LayerScape device trees to
fix a kernel BUG report.
- Use IRQCHIP_DECLARE for AVIC driver to fix a boot issue on i.MX25
with fw_devlink=on.
- Add missing I2C pinctrl entry for imx8mp-phyboard-pollux-rdk board
to fix the broken I2C GPIO recovery support.
- Add `fsl,use-minimum-ecc` property for imx6ull-myir-mys-6ulx-eval
device tree to fix UBI filesystem mount failure.
at91:
- wrong phy address that blocks Ethernet use on boards with sama5d27
SoM1
- restrictive pin possibilities for sam9x60
omap:
- Fix ocp interconnect bus access error reporting for omap_l3_noc by
setting IRQF_NO_THREAD
- Fix changed mmc slot order regression by adding mmc aliases for
am335x
- Fix dra7 reboot regression caused by invalid pcie reset map
- Fix smartreflex init regression caused by dropped legacy data
- Fix ti-sysc driver warning on unbind if reset is not deasserted
- Fix flakey reset deassert for dra7 iva
stm32:
- MAINTAINER file updates
broadcom:
- brcmstb SoC ID build fix
- MAINTAINER file updates"
* tag 'soc-fixes-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
MAINTAINERS: Add Alain Volmat as STM32 I2C/SMBUS maintainer
MAINTAINERS: Remove Vincent Abriou for STM/STI DRM drivers.
MAINTAINERS: Update some st.com email addresses to foss.st.com
ARM: dts: imx6ull: fix ubi filesystem mount failed
ARM: imx6ul-14x14-evk: Do not reset the Ethernet PHYs independently
arm64: dts: imx8mp-phyboard-pollux-rdk: Add missing pinctrl entry
arm64: dts: ls1012a: mark crypto engine dma coherent
arm64: dts: ls1043a: mark crypto engine dma coherent
arm64: dts: ls1046a: mark crypto engine dma coherent
ARM: imx: avic: Convert to using IRQCHIP_DECLARE
ARM: dts: at91: sam9x60: fix mux-mask to match product's datasheet
ARM: dts: at91: sam9x60: fix mux-mask for PA7 so it can be set to A, B and C
ARM: dts: at91-sama5d27_som1: fix phy address to 7
soc: ti: omap-prm: Fix occasional abort on reset deassert for dra7 iva
bus: ti-sysc: Fix warning on unbind if reset is not deasserted
ARM: OMAP2+: Fix smartreflex init regression after dropping legacy data
soc: ti: omap-prm: Fix reboot issue with invalid pcie reset map for dra7
MAINTAINERS: rectify BROADCOM PMB (POWER MANAGEMENT BUS) DRIVER
ARM: dts: am33xx: add aliases for mmc interfaces
bus: omap_l3_noc: mark l3 irqs as IRQF_NO_THREAD
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCYF37OgAKCRCAXGG7T9hj
vp8hAP4h7mvjfkntbFXagrJK9pi2xVC9d/YO5nfa8/K3LcGVnQD/fKcU9ggPN9vI
GLnhyprGLcCA4aTL6Ogb37o9fDd4Yws=
=joIg
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.12b-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"This contains a small series with a more elegant fix of a problem
which was originally fixed in rc2"
* tag 'for-linus-5.12b-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
Revert "xen: fix p2m size in dom0 for disabled memory hotplug case"
xen/x86: make XEN_BALLOON_MEMORY_HOTPLUG_LIMIT depend on MEMORY_HOTPLUG
msm:
- pll fixes
- shutdown hook fix
- runtime resume fix
- clear_oob fix
- kms locking fix
- display aux retry fix
rcar-du:
- warn_on in encoder init fix
etnaviv:
- Use FOLL_FORCE and FOLL_LONGTERM
i915:
- DisplayPort LTTPR fixes around link training and limiting it
according to supported spec version.
- Fix enabled_planes bitmask to really represent only logically
enabled planes.
- Fix DSS CTL registers for ICL DSI transcoders
- Fix the GT fence revocation runtime PM logic.
nouveau:
- cursor size regression fix
amdgpu:
- S0ix fixes
- Add PCI ID
- Polaris PCIe DPM fix
- Display fix for high refresh rate monitors
-----BEGIN PGP SIGNATURE-----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=S23m
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2021-03-26' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"As expected last week things were overly quiet so this week things
seem to have caught up. It still isn't too major.
msm and amdgpu lead the size here, the msm fixes are pretty varied
across the driver, the amdgpu one is mostly the S0ix fixes with some
other minor ones. Otherwise there are a few i915 fixes and one each
for nouveau, etnaviv and rcar-du.
msm:
- pll fixes
- shutdown hook fix
- runtime resume fix
- clear_oob fix
- kms locking fix
- display aux retry fix
rcar-du:
- warn_on in encoder init fix
etnaviv:
- Use FOLL_FORCE and FOLL_LONGTERM
i915:
- DisplayPort LTTPR fixes around link training and limiting it
according to supported spec version.
- Fix enabled_planes bitmask to really represent only logically
enabled planes.
- Fix DSS CTL registers for ICL DSI transcoders
- Fix the GT fence revocation runtime PM logic.
nouveau:
- cursor size regression fix
amdgpu:
- S0ix fixes
- Add PCI ID
- Polaris PCIe DPM fix
- Display fix for high refresh rate monitors"
* tag 'drm-fixes-2021-03-26' of git://anongit.freedesktop.org/drm/drm: (37 commits)
drm/nouveau/kms/nve4-nv108: Limit cursors to 128x128
drm/i915: Fix the GT fence revocation runtime PM logic
drm/amdgpu/display: restore AUX_DPHY_TX_CONTROL for DCN2.x
drm/amdgpu: Add additional Sienna Cichlid PCI ID
drm/amd/pm: workaround for audio noise issue
drm/i915/dsc: fix DSS CTL register usage for ICL DSI transcoders
drm/i915: Fix enabled_planes bitmask
drm/i915: Disable LTTPR support when the LTTPR rev < 1.4
drm/i915: Disable LTTPR support when the DPCD rev < 1.4
drm/i915/ilk-glk: Fix link training on links with LTTPRs
drm/msm/disp/dpu1: icc path needs to be set before dpu runtime resume
drm/amdgpu: skip kfd suspend/resume for S0ix
drm/amdgpu: drop S0ix checks around CG/PG in suspend
drm/amdgpu: skip CG/PG for gfx during S0ix
drm/amdgpu: update comments about s0ix suspend/resume
drm/amdgpu/swsmu: skip gfx cgpg on s0ix suspend
drm/amdgpu: re-enable suspend phase 2 for S0ix
drm/amdgpu: move s0ix check into amdgpu_device_ip_suspend_phase2 (v3)
drm/amdgpu: clean up non-DC suspend/resume handling
drm/amdgpu: don't evict vram on APUs for suspend to ram (v4)
...
Dan's address bounces, and has been bouncing for some time as he moved
to other projects.
I believe TI should be more careful with this, and should assign
alternate contacts for their drivers.
Anyway what we can do now is to remove the obsolete address.
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The function names in the comment blocks for the functions
scaling_available_frequencies_show() and
scaling_boost_frequencies_show() do not match the actual names.
Fixes: 6f19efc0a1 ("cpufreq: Add boost frequency support in core")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
