Fedora 35 sets DEBUGINFOD_URLS by default, which might lead to
unexpected stalls in perf record exit path, when we try to cache
profiled binaries.
# DEBUGINFOD_PROGRESS=1 ./perf record -a
^C[ perf record: Woken up 1 times to write data ]
Downloading from https://debuginfod.fedoraproject.org/ 447069
Downloading from https://debuginfod.fedoraproject.org/ 1502175
Downloading \^Z
Disabling DEBUGINFOD_URLS by default in perf record and adding
debuginfod option and .perfconfig variable support to enable id.
Default without debuginfo processing:
# perf record -a
Using system debuginfod setup:
# perf record -a --debuginfod
Using custom debuginfd url:
# perf record -a --debuginfod='https://evenbetterdebuginfodserver.krava'
Adding single perf_debuginfod_setup function and using
it also in perf buildid-cache command.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20211209200425.303561-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A common problem is confusing CPU map indices with the CPU, by wrapping
the CPU with a struct then this is avoided. This approach is similar to
atomic_t.
Committer notes:
To make it build with BUILD_BPF_SKEL=1 these files needed the
conversions to 'struct perf_cpu' usage:
tools/perf/util/bpf_counter.c
tools/perf/util/bpf_counter_cgroup.c
tools/perf/util/bpf_ftrace.c
Also perf_env__get_cpu() was removed back in "perf cpumap: Switch
cpu_map__build_map to cpu function".
Additionally these needed to be fixed for the ARM builds to complete:
tools/perf/arch/arm/util/cs-etm.c
tools/perf/arch/arm64/util/pmu.c
Suggested-by: John Garry <john.garry@huawei.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Vineet Singh <vineet.singh@intel.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: zhengjun.xing@intel.com
Link: https://lore.kernel.org/r/20220105061351.120843-49-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On ARM64, automatically record the link register if the frame pointer
mode is on. It will be used to do a dwarf unwind to find the caller of
the leaf frame if the frame pointer was omitted.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Alexandre Truong <alexandre.truong@arm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20211217154521.80603-2-german.gomez@arm.com
Signed-off-by: German Gomez <german.gomez@arm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Only perf report checked the validity of these arguments so apply the
same check to all tools that read them for consistency.
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Denis Nikitin <denik@chromium.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20211018134844.2627174-3-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The PERF_RECORD_AUX_OUTPUT_HW_ID event provides a way to match AUX output
data like Intel PT PEBS-via-PT back to the event that it came from, by
providing a hardware ID that is present in the AUX output.
Reviewed-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: x86@kernel.org
Link: http://lore.kernel.org/lkml/20210907163903.11820-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add an option to control the synthesizing behavior.
--synth <no|all|task|mmap|cgroup>
Fine-tune event synthesis: default=all
This can be useful when we know it doesn't need some synthesis like
in a specific usecase and/or when using pipe:
$ perf record -a --all-cgroups --synth cgroup -o- sleep 1 | \
> perf report -i- -s cgroup
Committer notes:
Added a clarification to the man page entry for --synth that this is
about pre-existing threads.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https //lore.kernel.org/r/20210811044658.1313391-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Depending on the use case, it might require some kind of synthesizing
and some not. Make it controllable to turn off heavy operations like
MMAP for all tasks.
Currently all users are converted to enable all the synthesis by
default. It'll be updated in the later patch.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https //lore.kernel.org/r/20210811044658.1313391-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Merge more updates from Andrew Morton:
"147 patches, based on 7d2a07b769.
Subsystems affected by this patch series: mm (memory-hotplug, rmap,
ioremap, highmem, cleanups, secretmem, kfence, damon, and vmscan),
alpha, percpu, procfs, misc, core-kernel, MAINTAINERS, lib,
checkpatch, epoll, init, nilfs2, coredump, fork, pids, criu, kconfig,
selftests, ipc, and scripts"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (94 commits)
scripts: check_extable: fix typo in user error message
mm/workingset: correct kernel-doc notations
ipc: replace costly bailout check in sysvipc_find_ipc()
selftests/memfd: remove unused variable
Kconfig.debug: drop selecting non-existing HARDLOCKUP_DETECTOR_ARCH
configs: remove the obsolete CONFIG_INPUT_POLLDEV
prctl: allow to setup brk for et_dyn executables
pid: cleanup the stale comment mentioning pidmap_init().
kernel/fork.c: unexport get_{mm,task}_exe_file
coredump: fix memleak in dump_vma_snapshot()
fs/coredump.c: log if a core dump is aborted due to changed file permissions
nilfs2: use refcount_dec_and_lock() to fix potential UAF
nilfs2: fix memory leak in nilfs_sysfs_delete_snapshot_group
nilfs2: fix memory leak in nilfs_sysfs_create_snapshot_group
nilfs2: fix memory leak in nilfs_sysfs_delete_##name##_group
nilfs2: fix memory leak in nilfs_sysfs_create_##name##_group
nilfs2: fix NULL pointer in nilfs_##name##_attr_release
nilfs2: fix memory leak in nilfs_sysfs_create_device_group
trap: cleanup trap_init()
init: move usermodehelper_enable() to populate_rootfs()
...
Rename bitmap_alloc() to bitmap_zalloc() in tools to follow the bitmap API
in the kernel.
No functional changes intended.
Link: https://lkml.kernel.org/r/20210814211713.180533-14-yury.norov@gmail.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Suggested-by: Yury Norov <yury.norov@gmail.com>
Acked-by: Yury Norov <yury.norov@gmail.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Lobakin <alobakin@pm.me>
Cc: Alexey Klimov <aklimov@redhat.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Stephane found that the name of the forked process in a system-wide
mode is wrong when --delay option is used. For example,
# perf record -a --delay=1000 noploop 3
The noploop process will run a busy loop for 3 second. And on an idle
machine it should show up at the top in the perf report. It works
well without the --delay option. But if I add the option, it showed
'perf' not 'noploop'.
# perf report -s comm -q | head -3
52.94% perf
16.65% swapper
12.04% chrome
It turned out that the dummy event didn't work at all and it missed
COMM and MMAP events for the noploop process (and others too). We
should enable the dummy event immediately in system-wide mode, as the
enable-on-exec would work only for task events.
With this change,
# perf report -s comm -q | head -3
52.75% noploop
17.03% swapper
12.83% chrome
Reported-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210827233212.3121037-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'perf record' and 'perf stat' commands have supported the option
'-C/--cpus' to count or collect only on the list of CPUs provided. This
option needs to be supported for hybrid as well.
For hybrid support, it needs to check that the cpu list are available
on hybrid PMU. One example for AlderLake, cpu0-7 is 'cpu_core', cpu8-11
is 'cpu_atom'.
Before:
# perf stat -e cpu_core/cycles/ -C11 -- sleep 1
Performance counter stats for 'CPU(s) 11':
<not supported> cpu_core/cycles/
1.006179431 seconds time elapsed
The 'perf stat' command silently returned "<not supported>" without any
helpful information. It should error out pointing out that that cpu11
was not 'cpu_core'.
After:
# perf stat -e cpu_core/cycles/ -C11 -- sleep 1
WARNING: 11 isn't a 'cpu_core', please use a CPU list in the 'cpu_core' range (0-7)
failed to use cpu list 11
We also need to support the events without pmu prefix specified.
# perf stat -e cycles -C11 -- sleep 1
WARNING: 11 isn't a 'cpu_core', please use a CPU list in the 'cpu_core' range (0-7)
Performance counter stats for 'CPU(s) 11':
1,067,373 cpu_atom/cycles/
1.005544738 seconds time elapsed
The perf tool creates two cycles events automatically, cpu_core/cycles/ and
cpu_atom/cycles/. It checks that cpu11 is not 'cpu_core', then shows a warning
for cpu_core/cycles/ and only count the cpu_atom/cycles/.
If part of cpus are 'cpu_core' and part of cpus are 'cpu_atom', for example,
# perf stat -e cycles -C0,11 -- sleep 1
WARNING: use 0 in 'cpu_core' for 'cycles', skip other cpus in list.
WARNING: use 11 in 'cpu_atom' for 'cycles', skip other cpus in list.
Performance counter stats for 'CPU(s) 0,11':
1,914,704 cpu_core/cycles/
2,036,983 cpu_atom/cycles/
1.005815641 seconds time elapsed
It now automatically selects cpu0 for cpu_core/cycles/, selects cpu11 for
cpu_atom/cycles/, and output with some warnings.
Some more complex examples,
# perf stat -e cycles,instructions -C0,11 -- sleep 1
WARNING: use 0 in 'cpu_core' for 'cycles', skip other cpus in list.
WARNING: use 11 in 'cpu_atom' for 'cycles', skip other cpus in list.
WARNING: use 0 in 'cpu_core' for 'instructions', skip other cpus in list.
WARNING: use 11 in 'cpu_atom' for 'instructions', skip other cpus in list.
Performance counter stats for 'CPU(s) 0,11':
2,780,387 cpu_core/cycles/
1,583,432 cpu_atom/cycles/
3,957,277 cpu_core/instructions/
1,167,089 cpu_atom/instructions/
1.006005124 seconds time elapsed
# perf stat -e cycles,cpu_atom/instructions/ -C0,11 -- sleep 1
WARNING: use 0 in 'cpu_core' for 'cycles', skip other cpus in list.
WARNING: use 11 in 'cpu_atom' for 'cycles', skip other cpus in list.
WARNING: use 11 in 'cpu_atom' for 'cpu_atom/instructions/', skip other cpus in list.
Performance counter stats for 'CPU(s) 0,11':
3,290,301 cpu_core/cycles/
1,953,073 cpu_atom/cycles/
1,407,869 cpu_atom/instructions/
1.006260912 seconds time elapsed
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https //lore.kernel.org/r/20210723063433.7318-4-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When the input is a regular file but the output is a pipe, it should
write a pipe header. But just repiping would write a portion of the
existing header which is different in 'size' value. So we need to
prevent it and write a new pipe header along with other information
like event attributes and features.
This can handle something like this:
# perf record -a -B sleep 1
# perf inject -b -i perf.data | perf report -i -
Factor out perf_event__synthesize_for_pipe() to be shared between perf
record and inject.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210719223153.1618812-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The repipe argument is only used by perf inject and the all others
passes 'false'. Let's remove it from the function signature and add
__perf_session__new() to be called from perf inject directly.
This is a preparation of the change the pipe input/output.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210719223153.1618812-2-namhyung@kernel.org
[ Fixed up some trivial conflicts as this patchset fell thru the cracks ;-( ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some symbols may not be resolved if a user only monitors one type of
PMU.
$ sudo perf record -e cpu_atom/branch-instructions/ ./big_small_workload
$ sudo perf report –stdio
# Overhead Command Shared Object Symbol
# ........ ......... ................. .....................
#
28.02% perf-exec [unknown] [.] 0x0000000000401cf6
11.32% perf-exec [unknown] [.] 0x0000000000401d04
10.90% perf-exec [unknown] [.] 0x0000000000401d11
10.61% perf-exec [unknown] [.] 0x0000000000401cfc
To parse symbols the metadata records, e.g., PERF_RECORD_COMM, which are
generated by the kernel, are required.
To decide whether to generate the metadata records, the kernel relies on
the event_filter_match() to filter the unrelated events.
On a hybrid system, event_filter_match() further checks the CPU mask of
the current enabled PMU. If an event is collected on the CPU which
doesn't have an enabled PMU, it's treated as an unrelated event.
The "big_small_workload" is created in a big core, but runs on a small
core. The metadata records are filtered, because the user only monitors
the PMU of the small core. The big core PMU is not enabled.
For a hybrid system, a dummy event is required to generate the complete
side-band events.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/1625760212-18441-1-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move evsel::nr_groups to perf_evsel::nr_groups, so we can move the group
interface to libperf.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Requested-by: Shunsuke Nakamura <nakamura.shun@fujitsu.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210706151704.73662-5-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move evsel::leader to perf_evsel::leader, so we can move the group
interface to libperf.
Also add several evsel helpers to ease up the transition:
struct evsel *evsel__leader(struct evsel *evsel);
- get leader evsel
bool evsel__has_leader(struct evsel *evsel, struct evsel *leader);
- true if evsel has leader as leader
bool evsel__is_leader(struct evsel *evsel);
- true if evsel is itw own leader
void evsel__set_leader(struct evsel *evsel, struct evsel *leader);
- set leader for evsel
Committer notes:
Fix this when building with 'make BUILD_BPF_SKEL=1'
tools/perf/util/bpf_counter.c
- if (evsel->leader->core.nr_members > 1) {
+ if (evsel->core.leader->nr_members > 1) {
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Requested-by: Shunsuke Nakamura <nakamura.shun@fujitsu.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210706151704.73662-4-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
I found that checking cgroup sampling support using the missing features
doesn't work on old kernels. Because it added both attr.cgroup bit and
PERF_SAMPLE_CGROUP bit, it needs to check whichever comes first (usually
the actual event, not dummy).
But it only checks the attr.cgroup bit which is set only in the dummy
event so cannot detect failtures due the sample bits. Also we don't
ignore the missing feature and retry, it'd be better checking it with
the API probing logic.
Committer notes:
Extracted the minimal part to check using the new cgroup API probe
routine, the part that removes the cgroup member can be left for further
discussion.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210527182835.1634339-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
AUX area data is not processed by 'perf record' and consequently the
--timestamp-boundary option may result in no values for "time of first
sample" and "time of last sample". However there are non-sample events
that can be used instead, namely 'itrace_start' and 'aux'.
'itrace_start' is issued before tracing starts, and 'aux' is issued
every time data is ready.
Implement tool callbacks for those two for 'perf record', to update the
timestamp boundary.
Example:
$ perf record -e intel_pt//u --timestamp-boundary uname
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.022 MB perf.data ]
$ perf script --header-only | grep "time of"
# time of first sample : 4574.835541
# time of last sample : 4574.835907
$ perf script --itrace=be -F-ip | head -1
uname 13752 [001] 4574.835589: 1 branches:uH:
$ perf script --itrace=be -F-ip | tail -1
uname 13752 [001] 4574.835867: 1 branches:uH:
$
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20210503064222.5319-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For perf-record, it would be useful to tell user the pmu which the
event belongs to.
For example,
# perf record -a -- sleep 1
# perf report
# To display the perf.data header info, please use --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 106 of event 'cpu_core/cycles/'
# Event count (approx.): 22043448
#
# Overhead Command Shared Object Symbol
# ........ ............ ....................... ............................
#
...
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210427070139.25256-18-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Before:
# perf record -a cycles,instructions,cache-misses
Workload failed: No such file or directory
#
After:
# perf record -a cycles,instructions,cache-misses
Failed to collect 'cycles' for the 'cycles,instructions,cache-misses' workload: No such file or directory
#
Helps disambiguating other error scenarios:
# perf record -a -e cycles,instructions,cache-misses bla
Failed to collect 'cycles,instructions,cache-misses' for the 'bla' workload: No such file or directory
# perf record -a cycles,instructions,cache-misses sleep 1
Failed to collect 'cycles' for the 'cycles,instructions,cache-misses' workload: No such file or directory
#
When all goes well we're back to the usual:
# perf record -a -e cycles,instructions,cache-misses sleep 1
[ perf record: Woken up 3 times to write data ]
[ perf record: Captured and wrote 3.151 MB perf.data (21242 samples) ]
#
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20210414131628.2064862-3-acme@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
aux-output events need to have an AUX area event as the group leader.
However, grouping events does not allow the AUX area event to be given
an address filter because the --filter option must come after the event,
which conflicts with the grouping syntax.
To allow filtering in that case, automatically create a group since that
is the requirement anyway.
Example: (requires Intel Tremont)
perf record -c 500 -e 'intel_pt//u' --filter 'filter main @ /bin/ls' -e 'cycles/aux-output/pp' ls
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20210121140418.14705-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit da231338ec ("perf record: Use an eventfd to wakeup when
done") uses eventfd() to solve a rare race where the setting and
checking of 'done' which add done_fd to pollfd. When draining buffer,
revents of done_fd is 0 and evlist__filter_pollfd function returns a
non-zero value. As a result, perf record does not stop profiling.
The following simple scenarios can trigger this condition:
# sleep 10 &
# perf record -p $!
After the sleep process exits, perf record should stop profiling and exit.
However, perf record keeps running.
If pollfd revents contains only POLLERR or POLLHUP, perf record
indicates that buffer is draining and need to stop profiling. Use
fdarray_flag__nonfilterable() to set done eventfd to nonfilterable
objects, so that evlist__filter_pollfd() does not filter and check done
eventfd.
Fixes: da231338ec ("perf record: Use an eventfd to wakeup when done")
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: zhangjinhao2@huawei.com
Link: http://lore.kernel.org/lkml/20210205065001.23252-1-yangjihong1@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a control 'ping' command to detect if perf is up and its control
interface is operational.
It will be used in following daemon patches to synchronize with record
session - when control interface is up and running, we know that perf
record is monitoring and ready to receive signals.
Example session:
terminal 1:
# mkfifo control ack
# perf record --control=fifo:control,ack
terminal 2:
# echo ping > control
# cat ack
ack
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20201226232038.390883-5-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding control 'stop' command to stop perf record.
When it is received, perf will set the 'done' variable to 1 to stop its
mmap ring buffer reading loop.
Example session:
terminal 1:
# mkfifo control ack
# perf record --control=fifo:control,ack
terminal 2:
# echo stop > control
terminal 1:
[ perf record: Woken up 7 times to write data ]
[ perf record: Captured and wrote 3.214 MB perf.data (38280 samples) ]
#
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20201226232038.390883-4-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a new 'evlist' control command to display all the evlist events.
When it is received, perf will scan and print current evlist into perf
record terminal.
The interface string for control file is:
evlist [-v|-g|-F]
The syntax follows perf evlist command:
-F Show just the sample frequency used for each event.
-v Show all fields.
-g Show event group information.
Example session:
terminal 1:
# mkfifo control ack
# perf record --control=fifo:control,ack -e '{cycles,instructions}'
terminal 2:
# echo evlist > control
terminal 1:
cycles
instructions
dummy:HG
terminal 2:
# echo 'evlist -v' > control
terminal 1:
cycles: size: 120, { sample_period, sample_freq }: 4000, sample_type: \
IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, inherit: 1, freq: 1, \
sample_id_all: 1, exclude_guest: 1
instructions: size: 120, config: 0x1, { sample_period, sample_freq }: 4000, \
sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, inherit: 1, freq: 1, \
sample_id_all: 1, exclude_guest: 1
dummy:HG: type: 1, size: 120, config: 0x9, { sample_period, sample_freq }: 4000, \
sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, inherit: 1, mmap: 1, \
comm: 1, freq: 1, task: 1, sample_id_all: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, \
bpf_event: 1
terminal 2:
# echo 'evlist -g' > control
terminal 1:
{cycles,instructions}
dummy:HG
terminal 2:
# echo 'evlist -F' > control
terminal 1:
cycles: sample_freq=4000
instructions: sample_freq=4000
dummy:HG: sample_freq=4000
This new evlist command is handy to get real event names when
wildcards are used.
Adding evsel_fprintf.c object to python/perf.so build, because
it's now evlist.c dependency.
Adding PYTHON_PERF define for python/perf.so compilation, so we
can use it to compile in only evsel__fprintf from evsel_fprintf.c
object.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20201226232038.390883-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding new control events to enable/disable specific event.
The interface string for control file are:
'enable <EVENT NAME>'
'disable <EVENT NAME>'
when received the command, perf will scan the current evlist
for <EVENT NAME> and if found it's enabled/disabled.
Example session:
terminal 1:
# mkfifo control ack perf.pipe
# perf record --control=fifo:control,ack -D -1 --no-buffering -e 'sched:*' -o - > perf.pipe
terminal 2:
# cat perf.pipe | perf --no-pager script -i -
terminal 1:
Events disabled
NOTE Above message will show only after read side of the pipe ('>')
is started on 'terminal 2'. The 'terminal 1's bash does not execute
perf before that, hence the delyaed perf record message.
terminal 3:
# echo 'enable sched:sched_process_fork' > control
terminal 1:
event sched:sched_process_fork enabled
terminal 2:
bash 33349 [034] 149587.674295: sched:sched_process_fork: comm=bash pid=33349 child_comm=bash child_pid=34056
bash 33349 [034] 149588.239521: sched:sched_process_fork: comm=bash pid=33349 child_comm=bash child_pid=34057
terminal 3:
# echo 'enable sched:sched_wakeup_new' > control
terminal 1:
event sched:sched_wakeup_new enabled
terminal 2:
bash 33349 [034] 149632.228023: sched:sched_process_fork: comm=bash pid=33349 child_comm=bash child_pid=34059
bash 33349 [034] 149632.228050: sched:sched_wakeup_new: bash:34059 [120] success=1 CPU:036
bash 33349 [034] 149633.950005: sched:sched_process_fork: comm=bash pid=33349 child_comm=bash child_pid=34060
bash 33349 [034] 149633.950030: sched:sched_wakeup_new: bash:34060 [120] success=1 CPU:036
Committer testing:
If I use 'sched:*' and then enable all events, I can't get 'perf record'
to react to further commands, so I tested it with:
[root@five ~]# perf record --control=fifo:control,ack -D -1 --no-buffering -e 'sched:sched_process_*' -o - > perf.pipe
Events disabled
Events enabled
Events disabled
And then it works as expected, so we need to fix this pre-existing
problem.
Another issue, we need to check if a event is already enabled or
disabled and change the message to be clearer, i.e.:
[root@five ~]# perf record --control=fifo:control,ack -D -1 --no-buffering -e 'sched:sched_process_*' -o - > perf.pipe
Events disabled
If we receive a 'disable' command, then it should say:
[root@five ~]# perf record --control=fifo:control,ack -D -1 --no-buffering -e 'sched:sched_process_*' -o - > perf.pipe
Events disabled
Events already disabled
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20201226232038.390883-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adds the infrastructure to sample the code address page size.
Introduce a new --code-page-size option for perf record.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Originally-by: Stephane Eranian <eranian@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210105195752.43489-4-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add --buildid-mmap option to enable build id in PERF_RECORD_MMAP2 events.
It will only work if there's kernel support for that and it disables
build id cache (implies --no-buildid).
It's also possible to enable it permanently via config option in
~/.perfconfig file:
[record]
build-id=mmap
Also added build_id bit in the verbose output for perf_event_attr:
# perf record --buildid-mmap -vv
...
perf_event_attr:
type 1
size 120
...
build_id 1
Adding also missing text_poke bit.
Committer testing:
$ perf record -h build
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-B, --no-buildid do not collect buildids in perf.data
-N, --no-buildid-cache
do not update the buildid cache
--buildid-all Record build-id of all DSOs regardless of hits
--buildid-mmap Record build-id in map events
$
$ perf record --buildid-mmap sleep 1
Failed: no support to record build id in mmap events, update your kernel.
$
After adding the needed kernel bits in a test kernel:
$ perf record -vv --buildid-mmap sleep 1 |& grep -m1 build
Enabling build id in mmap2 events.
$ perf evlist -v
cycles:u: size: 120, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|PERIOD, read_format: ID, disabled: 1, inherit: 1, exclude_kernel: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, bpf_event: 1, build_id: 1
$
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20201214105457.543111-16-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Support new sample type PERF_SAMPLE_DATA_PAGE_SIZE for page size.
Add new option --data-page-size to record sample data page size.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Stephane Eranian <eranian@google.com>
Cc: Will Deacon <will@kernel.org>
Link: http://lore.kernel.org/lkml/20201130172803.2676-3-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf_evlist__ is for 'struct perf_evlist' methods, in tools/lib/perf/,
go on completing this split.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf_evlist__ is for 'struct perf_evlist' methods, in tools/lib/perf/,
go on completing this split.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf_evlist__ is for 'struct perf_evlist' methods, in tools/lib/perf/,
go on completing this split.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf_evlist__ is for 'struct perf_evlist' methods, in tools/lib/perf/,
go on completing this split.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf_evlist__ is for 'struct perf_evlist' methods, in tools/lib/perf/,
go on completing this split.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf_evlist__ is for 'struct perf_evlist' methods, in tools/lib/perf/,
go on completing this split.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf_evlist__ is for 'struct perf_evlist' methods, in tools/lib/perf/,
go on completing this split.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf_evlist__ is for 'struct perf_evlist' methods, in tools/lib/perf/,
go on completing this split.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf_evlist__ is for 'struct perf_evlist' methods, in tools/lib/perf/,
go on completing this split.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf_evlist__ is for 'struct perf_evlist' methods, in tools/lib/perf/,
go on completing this split.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add 'snapshot' control command to create an AUX area tracing snapshot
the same as if sending SIGUSR2. The advantage of the FIFO is that access
is governed by access to the FIFO.
Example:
$ mkfifo perf.control
$ mkfifo perf.ack
$ cat perf.ack &
[1] 15235
$ sudo ~/bin/perf record --control fifo:perf.control,perf.ack -S -e intel_pt//u -- sleep 60 &
[2] 15243
$ ps -e | grep perf
15244 pts/1 00:00:00 perf
$ kill -USR2 15244
bash: kill: (15244) - Operation not permitted
$ echo snapshot > perf.control
ack
$
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20200901093758.32293-6-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Consolidate --control option parsing into one function, in preparation
for adding FIFO file name options.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20200901093758.32293-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The help info of option "--no-bpf-event" is wrongly described as "record
bpf events", correct it.
Committer testing:
$ perf record -h bpf
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
--clang-opt <clang options>
options passed to clang when compiling BPF scriptlets
--clang-path <clang path>
clang binary to use for compiling BPF scriptlets
--no-bpf-event do not record bpf events
$
Fixes: 71184c6ab7 ("perf record: Replace option --bpf-event with --no-bpf-event")
Signed-off-by: Wei Li <liwei391@huawei.com>
Acked-by: Song Liu <songliubraving@fb.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Li Bin <huawei.libin@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20200819031947.12115-1-liwei391@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We received an error report that perf-record caused 'Segmentation fault'
on a newly system (e.g. on the new installed ubuntu).
(gdb) backtrace
#0 __read_once_size (size=4, res=<synthetic pointer>, p=0x14) at /root/0-jinyao/acme/tools/include/linux/compiler.h:139
#1 atomic_read (v=0x14) at /root/0-jinyao/acme/tools/include/asm/../../arch/x86/include/asm/atomic.h:28
#2 refcount_read (r=0x14) at /root/0-jinyao/acme/tools/include/linux/refcount.h:65
#3 perf_mmap__read_init (map=map@entry=0x0) at mmap.c:177
#4 0x0000561ce5c0de39 in perf_evlist__poll_thread (arg=0x561ce68584d0) at util/sideband_evlist.c:62
#5 0x00007fad78491609 in start_thread (arg=<optimized out>) at pthread_create.c:477
#6 0x00007fad7823c103 in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:95
The root cause is, evlist__add_bpf_sb_event() just returns 0 if
HAVE_LIBBPF_SUPPORT is not defined (inline function path). So it will
not create a valid evsel for side-band event.
But perf-record still creates BPF side band thread to process the
side-band event, then the error happpens.
We can reproduce this issue by removing the libelf-dev. e.g.
1. apt-get remove libelf-dev
2. perf record -a -- sleep 1
root@test:~# ./perf record -a -- sleep 1
perf: Segmentation fault
Obtained 6 stack frames.
./perf(+0x28eee8) [0x5562d6ef6ee8]
/lib/x86_64-linux-gnu/libc.so.6(+0x46210) [0x7fbfdc65f210]
./perf(+0x342e74) [0x5562d6faae74]
./perf(+0x257e39) [0x5562d6ebfe39]
/lib/x86_64-linux-gnu/libpthread.so.0(+0x9609) [0x7fbfdc990609]
/lib/x86_64-linux-gnu/libc.so.6(clone+0x43) [0x7fbfdc73b103]
Segmentation fault (core dumped)
To fix this issue,
1. We either install the missing libraries to let HAVE_LIBBPF_SUPPORT
be defined.
e.g. apt-get install libelf-dev and install other related libraries.
2. Use this patch to skip the side-band event setup if HAVE_LIBBPF_SUPPORT
is not set.
Committer notes:
The side band thread is not used just with BPF, it is also used with
--switch-output-event, so narrow the ifdef to the BPF specific part.
Fixes: 23cbb41c93 ("perf record: Move side band evlist setup to separate routine")
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200805022937.29184-1-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move the clockid_res_ns struct member to the clock struct, so we have
the clock related stuff in one place.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Geneviève Bastien <gbastien@versatic.net>
Cc: Ian Rogers <irogers@google.com>
Cc: Jeremie Galarneau <jgalar@efficios.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lore.kernel.org/lkml/20200805093444.314999-5-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a new CLOCK_DATA feature that stores reference times when
-k/--clockid option is specified.
It contains the clock id and its reference time together with wall clock
time taken at the 'same time', both values are in nanoseconds.
The format of data is as below:
struct {
u32 version; /* version = 1 */
u32 clockid;
u64 wall_clock_ns;
u64 clockid_time_ns;
};
This clock reference times will be used in following changes to display
wall clock for perf events.
It's available only for recording with clockid specified, because it's
the only case where we can get reference time to wallclock time. It's
can't do that with perf clock yet.
Committer testing:
$ perf record -h -k
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-k, --clockid <clockid>
clockid to use for events, see clock_gettime()
$ perf record -k monotonic sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.017 MB perf.data (8 samples) ]
$ perf report --header-only | grep clockid -A1
# event : name = cycles:u, , id = { 88815, 88816, 88817, 88818, 88819, 88820, 88821, 88822 }, size = 120, { sample_period, sample_freq } = 4000, sample_type = IP|TID|TIME|PERIOD, read_format = ID, disabled = 1, inherit = 1, exclude_kernel = 1, mmap = 1, comm = 1, freq = 1, enable_on_exec = 1, task = 1, precise_ip = 3, sample_id_all = 1, exclude_guest = 1, mmap2 = 1, comm_exec = 1, use_clockid = 1, ksymbol = 1, bpf_event = 1, clockid = 1
# CPU_TOPOLOGY info available, use -I to display
--
# clockid frequency: 1000 MHz
# cpu pmu capabilities: branches=32, max_precise=3, pmu_name=skylake
# clockid: monotonic (1)
# reference time: 2020-08-06 09:40:21.619290 = 1596717621.619290 (TOD) = 21931.077673635 (monotonic)
$
Original-patch-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Geneviève Bastien <gbastien@versatic.net>
Cc: Ian Rogers <irogers@google.com>
Cc: Jeremie Galarneau <jgalar@efficios.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lore.kernel.org/lkml/20200805093444.314999-4-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move parse_clockid and all needed clcckid related stuff into clockid
object. We are going to add clockid_name function in following change,
so it's better it's placed in separated object and not in
builtin-record.c.
No functional change is intended.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Geneviève Bastien <gbastien@versatic.net>
Cc: Ian Rogers <irogers@google.com>
Cc: Jeremie Galarneau <jgalar@efficios.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lore.kernel.org/lkml/20200805093444.314999-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
