Make the parsing of flow actions more generic so it could be used by
mlx5 raw create flow.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Use ib_set_flow() when initializing flow related resources.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Any matching rules will be mutated based on the packet reformat context
which is attached to that given flow rule.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
A L3_TUNNEL_TO_L2 decap flow action requires to enable the encap bit on
the flow table, enable it if supported. This will allow to attach those
flow actions to NIC RX steering. We don't enable if running on a
representor.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Any matching packet will be stripped of it's VXLAN tunnel, only the inner
L2 onward is left. The user will receive the decapsulated packet.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
If NIC RX flow tables support decap operation, enable it on creation,
This allows to perform decapsulation of tunnelled packets by steering
rules. If NIC TX flow tables support reformat operation, enable it on
creation.
We don't enable those capabilities on representors as the E-Switch should
handle packet modification (can be configured via TC) and as current
hardware can't handle both FDB and NIC flow tables with decap/packet
reformat support.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When creating a flow steering rule, allow the user to attach a modify
header action.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Just like ingress steering, allow a user to create steering rules that
match egress vport traffic. We expose the same number of priorities as
the bypass (NIC RX) steering.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
mdev->state device state is not protected by the QP for which WRs are
being processed. Therefore, there is no need to hold spin lock while
checking mdev state.
Given that device fatal error is unlikely situation, wrap the condition
check with unlikely().
Additionally, kernel QP1 is also a kernel ULP for which soft CQEs needs
to be generated. Therefore, check for device fatal error before
processing QP1 work requests.
Fixes: 89ea94a7b6 ("IB/mlx5: Reset flow support for IB kernel ULPs")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
For dependencies, branch based on 'mellanox/mlx5-next' of
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux.git
Pull Flow actions to mutate packets from Leon Romanovsky:
====================
This series exposes the ability to create flow actions which can
mutate packet headers. We do that by exposing two new verbs:
* modify header - can change existing packet headers. packet
* reformat - can encapsulate or decapsulate a packet.
Once created a flow action must be attached to a steering
rule for it to take effect.
The first 10 patches refactor mlx5_core code, rename internal structures
to better reflect their operation and export needed functions so the RDMA
side can allocate the action.
The last 5 patches expose via the IOCTL infrastructure mlx5_ib methods
which do the actual allocation of resources and return an handle to the
user. A user of this API is expected to know how to work with the device's
spec as the input to those function is HW depended.
An example usage of the modify header action is routing, A user can create
an action which edits the L2 header and decrease the TTL.
An example usage of the packet reformat action is VXLAN encap/decap which
is done by the HW.
====================
* branch 'mlx5-flow-mutate':
RDMA/mlx5: Extend packet reformat verbs
RDMA/mlx5: Add new flow action verb - packet reformat
RDMA/uverbs: Add generic function to fill in flow action object
RDMA/mlx5: Add a new flow action verb - modify header
RDMA/uverbs: Add UVERBS_ATTR_CONST_IN to the specs language
net/mlx5: Export packet reformat alloc/dealloc functions
net/mlx5: Pass a namespace for packet reformat ID allocation
net/mlx5: Expose new packet reformat capabilities
{net, RDMA}/mlx5: Rename encap to reformat packet
net/mlx5: Move header encap type to IFC header file
net/mlx5: Break encap/decap into two separated flow table creation flags
net/mlx5: Add support for more namespaces when allocating modify header
net/mlx5: Export modify header alloc/dealloc functions
net/mlx5: Add proper NIC TX steering flow tables support
net/mlx5: Cleanup flow namespace getter switch logic
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
We expose new actions:
L2_TO_L2_TUNNEL - A generic encap from L2 to L2, the data passed should
be the encapsulating headers.
L3_TUNNEL_TO_L2 - Will do decap where the inner packet starts from L3,
the data should be mac or mac + vlan (14 or 18 bytes).
L2_TO_L3_TUNNEL - Will do encap where is L2 of the original packet will
not be included, the data should be the encapsulating
header.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
For now, only add L2_TUNNEL_TO_L2 option. This will allow to perform
generic decap operation if the encapsulating protocol is L2 based, and the
inner packet is also L2 based. For example this can be used to decap VXLAN
packets.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Refactor the initialization of a flow action object to a common function.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Expose the ability to create a flow action which changes packet
headers. The data passed from userspace should be modify header actions as
defined by HW specification.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Renames all encap mlx5_{core,ib} code to use the new naming of packet
reformat. This change doesn't introduce any function change and is
needed to properly reflect the operation being done by this action.
For example not only can we encapsulate a packet, but also decapsulate it.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
In the current code, the TX affinity is per RoCE device, which can cause
unfairness between different contexts. e.g. if we open two contexts, and
each open 10 QPs concurrently, all of the QPs of the first context might
end up on the first port instead of distributed on the two ports as
expected
To overcome this unfairness between processes, we maintain per device TX
affinity, and per process TX affinity.
The allocation algorithm is as follow:
1. Hold two tx_port_affinity atomic variables, one per RoCE device and one
per ucontext. Both initialized to 0.
2. In mlx5_ib_alloc_ucontext do:
2.1. ucontext.tx_port_affinity = device.tx_port_affinity
2.2. device.tx_port_affinity += 1
3. In modify QP INIT2RST:
3.1. qp.tx_port_affinity = ucontext.tx_port_affinity % MLX5_PORT_NUM
3.2. ucontext.tx_port_affinity += 1
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Reviewed-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There are several blockable mmu notifiers which might sleep in
mmu_notifier_invalidate_range_start and that is a problem for the
oom_reaper because it needs to guarantee a forward progress so it cannot
depend on any sleepable locks.
Currently we simply back off and mark an oom victim with blockable mmu
notifiers as done after a short sleep. That can result in selecting a new
oom victim prematurely because the previous one still hasn't torn its
memory down yet.
We can do much better though. Even if mmu notifiers use sleepable locks
there is no reason to automatically assume those locks are held. Moreover
majority of notifiers only care about a portion of the address space and
there is absolutely zero reason to fail when we are unmapping an unrelated
range. Many notifiers do really block and wait for HW which is harder to
handle and we have to bail out though.
This patch handles the low hanging fruit.
__mmu_notifier_invalidate_range_start gets a blockable flag and callbacks
are not allowed to sleep if the flag is set to false. This is achieved by
using trylock instead of the sleepable lock for most callbacks and
continue as long as we do not block down the call chain.
I think we can improve that even further because there is a common pattern
to do a range lookup first and then do something about that. The first
part can be done without a sleeping lock in most cases AFAICS.
The oom_reaper end then simply retries if there is at least one notifier
which couldn't make any progress in !blockable mode. A retry loop is
already implemented to wait for the mmap_sem and this is basically the
same thing.
The simplest way for driver developers to test this code path is to wrap
userspace code which uses these notifiers into a memcg and set the hard
limit to hit the oom. This can be done e.g. after the test faults in all
the mmu notifier managed memory and set the hard limit to something really
small. Then we are looking for a proper process tear down.
[akpm@linux-foundation.org: coding style fixes]
[akpm@linux-foundation.org: minor code simplification]
Link: http://lkml.kernel.org/r/20180716115058.5559-1-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Christian König <christian.koenig@amd.com> # AMD notifiers
Acked-by: Leon Romanovsky <leonro@mellanox.com> # mlx and umem_odp
Reported-by: David Rientjes <rientjes@google.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Mike Marciniszyn <mike.marciniszyn@intel.com>
Cc: Dennis Dalessandro <dennis.dalessandro@intel.com>
Cc: Sudeep Dutt <sudeep.dutt@intel.com>
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Cc: Dimitri Sivanich <sivanich@sgi.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAltwm2geHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGITkH/iSzkVhT2OxHoir0
mLVzTi7/Z17L0e/ELl7TvAC0iLFlWZKdlGR0g3b4/QpXLPmNK4HxiDRTQuWn8ke0
qDZyDq89HqLt+mpeFZ43PCd9oqV8CH2xxK3iCWReqv6bNnowGnRpSStlks4rDqWn
zURC/5sUh7TzEG4s997RrrpnyPeQWUlf/Mhtzg2/WvK2btoLWgu5qzjX1uFh3s7u
vaF2NXVJ3X03gPktyxZzwtO1SwLFS1jhwUXWBZ5AnoJ99ywkghQnkqS/2YpekNTm
wFk80/78sU+d91aAqO8kkhHj8VRrd+9SGnZ4mB2aZHwjZjGcics4RRtxukSfOQ+6
L47IdXo=
=sJkt
-----END PGP SIGNATURE-----
Merge tag 'v4.18' into rdma.git for-next
Resolve merge conflicts from the -rc cycle against the rdma.git tree:
Conflicts:
drivers/infiniband/core/uverbs_cmd.c
- New ifs added to ib_uverbs_ex_create_flow in -rc and for-next
- Merge removal of file->ucontext in for-next with new code in -rc
drivers/infiniband/core/uverbs_main.c
- for-next removed code from ib_uverbs_write() that was modified
in for-rc
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
mlx5_ib_create_qp_resp was never initialized and only the first 4 bytes
were written.
Fixes: 41d902cb7c ("RDMA/mlx5: Fix definition of mlx5_ib_create_qp_resp")
Cc: <stable@vger.kernel.org>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Several handlers need temporary allocations for the life of the method,
switch them to use the uverbs_alloc allocator.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
There is no reason for drivers to do this, the core code should take of
everything. The drivers will provide their information from rodata to
describe their modifications to the core's base uapi specification.
The core uses this to build up the runtime uapi for each device.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Now that the unregister_netdev flow for IPoIB no longer relies on external
code we can now introduce the use of priv_destructor and
needs_free_netdev.
The rdma_netdev flow is switched to use the netdev common priv_destructor
instead of the special free_rdma_netdev and the IPOIB ULP adjusted:
- priv_destructor needs to switch to point to the ULP's destructor
which will then call the rdma_ndev's in the right order
- We need to be careful around the error unwind of register_netdev
as it sometimes calls priv_destructor on failure
- ULPs need to use ndo_init/uninit to ensure proper ordering
of failures around register_netdev
Switching to priv_destructor is a necessary pre-requisite to using
the rtnl new_link mechanism.
The VNIC user for rdma_netdev should also be revised, but that is left for
another patch.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Denis Drozdov <denisd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
This does the same as the patch before, except for ioctl. The rules are
the same, but for the ioctl methods the core code handles setting up the
uobject.
- Retrieve the ib_dev from the uobject->context->device. This is
safe under ioctl as the core has already done rdma_alloc_begin_uobject
and so CREATE calls are entirely protected by the rwsem.
- Retrieve the ib_dev from uobject->object
- Call ib_uverbs_get_ucontext()
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The proper return code is "-EOPNOTSUPP" when the modify_cq() callback is
not supported, all drivers should generate this and all users should check
for it when detecting not supported functionality.
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com> (for mlx5)
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This clearly indicates that the input is a bitwise combination of values
in an enum, and identifies which enum contains the definition of the bits.
Special accessors are provided that handle the mandatory validation of the
allowed bits and enforce the correct type for bitwise flags.
If we had introduced this at the start then the kabi would have uniformly
used u64 data to pass flags, however today there is a mixture of u64 and
u32 flags. All places are converted to accept both sizes and the accessor
fixes it. This allows all existing flags to grow to u64 in future without
any hassle.
Finally all flags are, by definition, optional. If flags are not passed
the accessor does not fail, but provides a value of zero.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Since neither ib_post_send() nor ib_post_recv() modify the data structure
their second argument points at, declare that argument const. This change
makes it necessary to declare the 'bad_wr' argument const too and also to
modify all ULPs that call ib_post_send(), ib_post_recv() or
ib_post_srq_recv(). This patch does not change any functionality but makes
it possible for the compiler to verify whether the
ib_post_(send|recv|srq_recv) really do not modify the posted work request.
To make this possible, only one cast had to be introduce that casts away
constness, namely in rpcrdma_post_recvs(). The only way I can think of to
avoid that cast is to introduce an additional loop in that function or to
change the data type of bad_wr from struct ib_recv_wr ** into int
(an index that refers to an element in the work request list). However,
both approaches would require even more extensive changes than this
patch.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Since the next patch will constify the wr pointer, do not modify the data
that pointer points at.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Cc: Saeed Mahameed <saeedm@mellanox.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When posting a send work request, the work request that is posted is not
modified by any of the RDMA drivers. Make this explicit by constifying
most ib_send_wr pointers in RDMA transport drivers.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When a CX5 device is configured in dual-port RoCE mode, after creating
many VFs against port 1, creating the same number of VFs against port 2
will flood kernel/syslog with something like
"mlx5_*:mlx5_ib_bind_slave_port:4266:(pid 5269): port 2 already
affiliated."
So basically, when traversing mlx5_ib_dev_list, mlx5_ib_add_slave_port()
repeatedly attempts to bind the new mpi structure to every device on the
list until it finds an unbound device.
Change the log level from warn to dbg to avoid log flooding as the warning
should be harmless.
Signed-off-by: Qing Huang <qing.huang@oracle.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
We have a parallel unlocked reader and writer with ib_uverbs_get_context()
vs everything else, and nothing guarantees this works properly.
Audit and fix all of the places that access ucontext to use one of the
following locking schemes:
- Call ib_uverbs_get_ucontext() under SRCU and check for failure
- Access the ucontext through an struct ib_uobject context member
while holding a READ or WRITE lock on the uobject.
This value cannot be NULL and has no race.
- Hold the ucontext_lock and check for ufile->ucontext !NULL
This also re-implements ib_uverbs_get_ucontext() in a way that is safe
against concurrent ib_uverbs_get_context() and disassociation.
As a side effect, every access to ucontext in the commands is via
ib_uverbs_get_context() with an error check, or via the uobject, so there
is no longer any need for the core code to check ucontext on every command
call. These checks are also removed.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This approach matches the standard flow of the typical write method that
relies on the HW object to store the device and the uobject to access the
ucontext. Avoids the use of the devx_ufile2uctx in several places will
make revising the semantics of ib_uverbs_get_ucontext() in the next patch
simpler.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Expose the mlx5 flow steering parsing trees, exposing the functionality to
user space.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add support to set a destination that is a flow table, this can come from
the DEVX destination.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add support to set a public flow steering rule when its destination is a
TIR by using raw specification data.
The logic follows the verbs API but instead of using ib_spec(s) the raw,
device specific, description is used.
This allows supporting specialty matchers without having to define new
matches in the verbs struct based language.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Introduce driver create and destroy flow methods on the uverbs flow
object.
This allows the driver to get its specific device attributes to match the
underlay specification while still using the generic ib_flow object for
cleanup and code sharing.
The IB object's attributes are set via the ib_set_flow() helper function.
The specific implementation for the given specification is added in
downstream patches.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Introduce flow steering matcher object and its create and destroy methods.
This matcher object holds some mlx5 specific driver properties that
matches the underlay device specification when an mlx5 flow steering group
is created.
It will be used in downstream patches to be part of mlx5 specific create
flow method.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
From git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux.git
This is required to resolve dependencies of the next series of RDMA
patches.
* branch 'mellanox/mlx5-next':
net/mlx5: Add support for flow table destination number
net/mlx5: Add forward compatible support for the FTE match data
net/mlx5: Fix tristate and description for MLX5 module
net/mlx5: Better return types for CQE API
net/mlx5: Use ERR_CAST() instead of coding it
net/mlx5: Add missing SET_DRIVER_VERSION command translation
net/mlx5: Add XRQ commands definitions
net/mlx5: Add core support for double vlan push/pop steering action
net/mlx5: Expose MPEGC (Management PCIe General Configuration) structures
net/mlx5: FW tracer, add hardware structures
net/mlx5: fix uaccess beyond "count" in debugfs read/write handlers
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Remove "uctx" and "pa" variables that were set but not used.
Fixes: a8b92ca1b0 ("IB/mlx5: Introduce DEVX")
Fixes: 8f06228733 ("RDMA/mlx5: Remove debug prints of VMA pointers")
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Current description did not include new devices. Fix that by proving the
correct generic description.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
- cxgb4 could wrongly fail MR creation due to a typo
- Various crashes if the wrong QP type is mixed in with APIs that expect
other types
- Syzkaller oops
- Using ERR_PTR and NULL together cases HFI1 to crash in some cases
- mlx5 memory leak in error unwind
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQIcBAABCgAGBQJbSNzSAAoJEDht9xV+IJsarfQP/38i9pbDqWdniEhv42CisS1D
aZYygJ6yAsoEPmEI1oIGtJURte44wxHWmWO2Jbz8aTFl19tSh2cZgFfsNKImSU5A
5ON19gxOeQ/KiZPmfbgP8cgunU41DpYq3twW8NvW9u5JTl1nbFKtpWfJxKVvjlsu
PwiFrQxG43/9BrooHJc4eogJHmB77iypR3NmkagAM3oSx/d35zt+Wnw45bybIl8e
T6OvyEvNHlGLQoqE8j4JYDN6whLwr7uqtcJXv/ukjhkD4WMb8ti9QZH6FPA+8pGG
oRO5AlbWpcSHThu4tYYoThEdVMLjS5RnzOOUyMiHr7CS+MlEPrKtR5D23f3egSyU
lUETkyPfkVRSrfD9LnOrj+W6xjwNMJm2Rq/zexVnoKjRrl5asfmDTTAhWJxu7CMK
Oeb39ue6r7A3wEpaLWlqqrVnzIS+rKKKFCxqc+ni/JUTX0EPr+OcVJav+JmfjpKd
Q24sbiSkoAp7HRJnsenCX4Kv2x55ClhLktGnltgoJtzsMbT/EOO38d2LrYpWkCkX
aoi4Xpg1rOvY9biy4dDtGmawsKgEKwJ2j/xr6RQdKZZAifeabnoro/ekSj5/SquQ
vUfATYG+JEKGethWgO2A7/tgdo7artrN77w0eM0yKtNuJwUGLHCuXbDFUgFxapvm
RIXvnUEp9Q27bc2JjX3z
=WDR8
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"Things have been quite slow, only 6 RC patches have been sent to the
list. Regression, user visible bugs, and crashing fixes:
- cxgb4 could wrongly fail MR creation due to a typo
- various crashes if the wrong QP type is mixed in with APIs that
expect other types
- syzkaller oops
- using ERR_PTR and NULL together cases HFI1 to crash in some cases
- mlx5 memory leak in error unwind"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/mlx5: Fix memory leak in mlx5_ib_create_srq() error path
RDMA/uverbs: Don't fail in creation of multiple flows
IB/hfi1: Fix incorrect mixing of ERR_PTR and NULL return values
RDMA/uverbs: Fix slab-out-of-bounds in ib_uverbs_ex_create_flow
RDMA/uverbs: Protect from attempts to create flows on unsupported QP
iw_cxgb4: correctly enforce the max reg_mr depth
User's supplied index is checked again total number of system pages, but
this number already includes num_static_sys_pages, so addition of that
value to supplied index causes to below error while trying to access
sys_pages[].
BUG: KASAN: slab-out-of-bounds in bfregn_to_uar_index+0x34f/0x400
Read of size 4 at addr ffff880065561904 by task syz-executor446/314
CPU: 0 PID: 314 Comm: syz-executor446 Not tainted 4.18.0-rc1+ #256
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014
Call Trace:
dump_stack+0xef/0x17e
print_address_description+0x83/0x3b0
kasan_report+0x18d/0x4d0
bfregn_to_uar_index+0x34f/0x400
create_user_qp+0x272/0x227d
create_qp_common+0x32eb/0x43e0
mlx5_ib_create_qp+0x379/0x1ca0
create_qp.isra.5+0xc94/0x22d0
ib_uverbs_create_qp+0x21b/0x2a0
ib_uverbs_write+0xc2c/0x1010
vfs_write+0x1b0/0x550
ksys_write+0xc6/0x1a0
do_syscall_64+0xa7/0x590
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x433679
Code: fd ff 48 81 c4 80 00 00 00 e9 f1 fe ff ff 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 3b 91 fd ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fff2b3d8e48 EFLAGS: 00000217 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 00000000004002f8 RCX: 0000000000433679
RDX: 0000000000000040 RSI: 0000000020000240 RDI: 0000000000000003
RBP: 00000000006d4018 R08: 00000000004002f8 R09: 00000000004002f8
R10: 00000000004002f8 R11: 0000000000000217 R12: 0000000000000000
R13: 000000000040cb00 R14: 000000000040cb90 R15: 0000000000000006
Allocated by task 314:
kasan_kmalloc+0xa0/0xd0
__kmalloc+0x1a9/0x510
mlx5_ib_alloc_ucontext+0x966/0x2620
ib_uverbs_get_context+0x23f/0xa60
ib_uverbs_write+0xc2c/0x1010
__vfs_write+0x10d/0x720
vfs_write+0x1b0/0x550
ksys_write+0xc6/0x1a0
do_syscall_64+0xa7/0x590
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Freed by task 1:
__kasan_slab_free+0x12e/0x180
kfree+0x159/0x630
kvfree+0x37/0x50
single_release+0x8e/0xf0
__fput+0x2d8/0x900
task_work_run+0x102/0x1f0
exit_to_usermode_loop+0x159/0x1c0
do_syscall_64+0x408/0x590
entry_SYSCALL_64_after_hwframe+0x49/0xbe
The buggy address belongs to the object at ffff880065561100
which belongs to the cache kmalloc-4096 of size 4096
The buggy address is located 2052 bytes inside of
4096-byte region [ffff880065561100, ffff880065562100)
The buggy address belongs to the page:
page:ffffea0001955800 count:1 mapcount:0 mapping:ffff88006c402480 index:0x0 compound_mapcount: 0
flags: 0x4000000000008100(slab|head)
raw: 4000000000008100 ffffea0001a7c000 0000000200000002 ffff88006c402480
raw: 0000000000000000 0000000080070007 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff880065561800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff880065561880: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff880065561900: 04 fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
^
ffff880065561980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff880065561a00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
Cc: <stable@vger.kernel.org> # 4.15
Fixes: 1ee47ab3e8 ("IB/mlx5: Enable QP creation with a given blue flame index")
Reported-by: Noa Osherovich <noaos@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There is no need for three consecutive calls to alloc_bfreg(). It can be
implemented with one function.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Fix memory leak in the error path of mlx5_ib_create_srq() by making sure
to free the allocated srq.
Fixes: c2b37f7648 ("IB/mlx5: Fix integer overflows in mlx5_ib_create_srq")
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Enable uverbs_destroy_def_handler to be used by drivers and replace
current code to use it.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Extend the existing grh_required flag to check when AV's are handled that
a GRH is present.
Since we don't want to do query_port during the AV checks for performance
reasons move the flag into the immutable_data.
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The internal flag IP_BASED_GIDS was added to a field that was being used
to hold the port Info CapabilityMask without considering the effects this
will have. Since most drivers just use the value from the HW MAD it means
IP_BASED_GIDS will also become set on any HW that sets the IBA flag
IsOtherLocalChangesNoticeSupported - which is not intended.
Fix this by keeping port_cap_flags only for the IBA CapabilityMask value
and store unrelated flags externally. Move the bit definitions for this to
ib_mad.h to make it clear what is happening.
To keep the uAPI unchanged define a new set of flags in the uapi header
that are only used by ib_uverbs_query_port_resp.port_cap_flags which match
the current flags supported in rdma-core, and the values exposed by the
current kernel.
Fixes: b4a26a2728 ("IB: Report using RoCE IP based gids in port caps")
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
It is incorrect to depend on set_id value to know if counters were
allocated or not. set_id_valid field is set to true when counters
were allocated. Therefore, use set_id_valid while deciding to
free counters.
Cc: <stable@vger.kernel.org> # 4.15
Fixes: aac4492ef2 ("IB/mlx5: Update counter implementation for dual port RoCE")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Clean up a little bit code to drop unused port_num parameter.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In general, accessing userspace memory beyond the length of the supplied
buffer in VFS read/write handlers can lead to both kernel memory corruption
(via kernel_read()/kernel_write(), which can e.g. be triggered via
sys_splice()) and privilege escalation inside userspace.
In this case, the affected files are in debugfs (and should therefore only
be accessible to root), and the read handlers check that *pos is zero
(meaning that at least sys_splice() can't trigger kernel memory
corruption). Because of the root requirement, this is not a security fix,
but rather a cleanup.
For the read handlers, fix it by using simple_read_from_buffer() instead
of custom logic. Add min() calls to the write handlers.
Fixes: 4a2da0b8c0 ("IB/mlx5: Add debug control parameters for congestion control")
Fixes: e126ba97db ("mlx5: Add driver for Mellanox Connect-IB adapters")
Signed-off-by: Jann Horn <jannh@google.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This newer macro allows specifying a lower bound on the accepted size, and
has an 'unlimited' upper bound. Due to this it never checks for trailing
zeroing so it doesn't make any sense to combine it with MIN_SZ_OR_ZERO, so
drop MIN_SZ_OR_ZERO when they are used together
There were a couple of places that open coded this pattern, switch them to
use the clearer UVERBS_ATTR_MIN_SIZE for clarity.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
This bit of boilerplate isn't really necessary, we can use bitfields
instead of a flags enum and the macros can then individually initialize
them through the __VA_ARGS__ like everything else.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Hide it inside the macros. The & is confusing and interferes with using
this as a generic DSL in later patches.
Since this also touches almost every line, also run the specs through
clang-format (with 'BinPackParameters: false') to make the maintenance
easier.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Instead of the large set of indirecting macros, define the few needed
macros to directly instantiate the struct uverbs_oject_tree_def and
associated objects list.
This is small amount of code duplication but the readability is far
better.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Instead of the large set of indirecting macros, define the few needed
macros to directly instantiate the struct uverbs_method_def and associated
attributes list.
This is small amount of code duplication but the readability is far
better.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Instead of using a complex cascade of macros, just directly provide the
initializer list each of the declarations is trying to create.
Now that the macros are simplified this also reworks the uverbs_attr_spec
to be friendly to older compilers by eliminating any unnamed
structures/unions inside, and removing the duplication of some fields. The
structure size remains at 16 bytes which was the original motivation for
some of this oddness.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
The specs are required to operate the uverbs file, so they belong inside
the ib_uverbs_device, not inside the ib_device. The spec passed in the
ib_device is just a communication from the driver and should not be used
during runtime.
This also changes the lifetime of the spec memory to match the
ib_uverbs_device, however at this time the spec_root can still contain
driver pointers after disassociation, so it cannot be used if ib_dev is
NULL. This is preparation for another series.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
For dependencies, branch based on 'mellanox/mlx5-next' of
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux.git
Pull Dump and fill MKEY from Leon Romanovsky:
====================
MLX5 IB HCA offers the memory key, dump_fill_mkey to increase performance,
when used in a send or receive operations.
It is used to force local HCA operations to skip the PCI bus access, while
keeping track of the processed length in the ibv_sge handling.
In this three patch series, we expose various bits in our HW spec
file (mlx5_ifc.h), move unneeded for mlx5_core FW command and export such
memory key to user space thought our mlx5-abi header file.
====================
Botched auto-merge in mlx5_ib_alloc_ucontext() resolved by hand.
* branch 'mlx5-dump-fill-mkey':
IB/mlx5: Expose dump and fill memory key
net/mlx5: Add hardware definitions for dump_fill_mkey
net/mlx5: Limit scope of dump_fill_mkey function
net/mlx5: Rate limit errors in command interface
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
MLX5 IB HCA offers the memory key, dump_fill_mkey to boost
performance, when used in a send or receive operations.
It is used to force local HCA operations to skip the PCI bus access,
while keeping track of the processed length in the ibv_sge handling.
Meaning, instead of a PCI write access the HCA leaves the target
memory untouched, and skips filling that packet section. Similar
behavior is done upon send, the HCA skips data in memory relevant
to this key and saves PCI bus access.
This functionality saves PCI read/write operations.
Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Guy Levi <guyle@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
mlx5_core_dump_fill_mkey() is going to be used in next
patch in IB and doesn't need to be visible to whole
mlx5_core. Move that command to mlx5_ib.
Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Currently the driver sets the mask of the gre_protocol to 0xffff
without consideration in the user request.
Fix it by copy the mask from the verbs spec.
Fixes: da2f22ae77 ("IB/mlx5: Add support for GRE flow specification")
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Avoid that the compiler complains about set-but-not-used variables when
building with W=1. This patch does not change any functionality.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Leon Romanovsky <leonro@mellanox.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Improve uverbs_cleanup_ucontext algorithm to work properly when the
topology graph of the objects cannot be determined at compile time. This
is the case with objects created via the devx interface in mlx5.
Typically uverbs objects must be created in a strict topologically sorted
order, so that LIFO ordering will generally cause them to be freed
properly. There are only a few cases (eg memory windows) where objects can
point to things out of the strict LIFO order.
Instead of using an explicit ordering scheme where the HW destroy is not
allowed to fail, go over the list multiple times and allow the destroy
function to fail. If progress halts then a final, desperate, cleanup is
done before leaking the memory. This indicates a driver bug.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The failure in releasing one UAR doesn't mean that we can't continue to
release rest of system pages, so don't return too early.
As part of cleanup, there is no need to print warning if
mlx5_cmd_free_uar() fails because such warning will be printed as part of
mlx5_cmd_exec().
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Fixes for mlx5 core and netdev driver:
Two fixes from Alex Vesker to address command interface issues
- Race in command interface polling mode
- Incorrect raw command length parsing
From Shay Agroskin, Fix wrong size allocation for QoS ETC TC regitster.
From Or Gerlitz and Eli Cohin, Address backward compatability issues for when
Eswitch capability is not advertised for the PF host driver
- Fix required capability for manipulating MPFS
- E-Switch, Disallow vlan/spoofcheck setup if not being esw manager
- Avoid dealing with vport IB/eth representors if not being e-switch manager
- E-Switch, Avoid setup attempt if not being e-switch manager
- Don't attempt to dereference the ppriv struct if not being eswitch manager
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJbMtMEAAoJEEg/ir3gV/o+NjAIAMGrerpwg8ADBj+b9tSWm4WV
2yAJ561kBObwhA+uDJtH7mGUO3+AnkcWz9vynGqFdmkOikUcbpPkBb9D+rmFbkX2
E585pwR3pH7lEzYEG4xO6SwuQcQ4OytFNxz94AT6CgNEXqrmbrD7A5Vsgk265yZq
pJzL1OVfkXKOtb2x5PpCOh19/28OxAzyMQfoklsE2Wn7j8/2RWX0UUDxuF8jS+He
9loaurT4Fsfo5JYE+o+k38knHFBkdTUZBD9/bZrtaMcrD68bZdJTpZm6eYwRXW3S
7J88SmH/xTy74f1KY4qf0JOTxnaWtm/r4YaCXf1QD05W2/U9FQpIW1ipMKH51vk=
=te2H
-----END PGP SIGNATURE-----
Merge tag 'mlx5-fixes-2018-06-26' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-fixes-2018-06-26
Fixes for mlx5 core and netdev driver:
Two fixes from Alex Vesker to address command interface issues
- Race in command interface polling mode
- Incorrect raw command length parsing
From Shay Agroskin, Fix wrong size allocation for QoS ETC TC regitster.
From Or Gerlitz and Eli Cohin, Address backward compatability issues for when
Eswitch capability is not advertised for the PF host driver
- Fix required capability for manipulating MPFS
- E-Switch, Disallow vlan/spoofcheck setup if not being esw manager
- Avoid dealing with vport IB/eth representors if not being e-switch manager
- E-Switch, Avoid setup attempt if not being e-switch manager
- Don't attempt to dereference the ppriv struct if not being eswitch manager
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
In smartnic env, the host (PF) driver might not be an e-switch
manager, hence the switchdev mode representors are running on
the embedded cpu (EC) and not at the host.
As such, we should avoid dealing with vport representors if
not being esw manager.
Fixes: b5ca15ad7e ('IB/mlx5: Add proper representors support')
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
This patch follows the logic from ib_core but considers the internal
device state upon executing the involved commands.
Specifically,
Upon internal error state modify QP to an error state can be assumed to
be success as each in-progress WR going to be flushed in error in any
case as expected by that modify command.
In addition,
As the drain should never fail the driver makes sure that post_send/recv
will succeed even if the device is already in an internal error state.
As such once the driver will supply the simulated/SW CQEs the CQE for
the drain WR will be handled as well.
In case of an internal error state the CQE for the drain WR may be
completed as part of the main task that handled the error state or by
the task that issued the drain WR.
As the above depends on scheduling the code takes the relevant locks and
actions to make sure that the completion handler for that WR will always
be called after that the post_send/recv were issued but not in parallel
to the other task that handles the error flow.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
For dependencies, branch based on 'mellanox/mlx5-next' of
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux.git
Pull RoCE ICRC counters from Leon Romanovsky:
====================
This series exposes RoCE ICRC counter through existing RDMA hw_counters
sysfs interface.
The first patch has all HW definitions in mlx5_ifc.h file and second patch
is the actual counter implementation.
====================
* branch 'icrc-counter':
IB/mlx5: Support RoCE ICRC encapsulated error counter
net/mlx5: Add RoCE RX ICRC encapsulated counter
This patch adds support to query the counter that counts the
RoCE packets with corrupted ICRC (Invariant Cyclic Redundancy Code).
This counter will be under
/sys/class/infiniband/<mlx5-dev>/ports/<port>/hw_counters/
rx_icrc_encapsulated - The number of RoCE packets with ICRC
error.
Signed-off-by: Talat Batheesh <talatb@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Regression and crashing bug fixes:
- mlx4/5: Fixes for issues found from various checkers
- A resource tracking and uverbs regression in the core code
- qedr: NULL pointer regression found during testing
- rxe: Various small bugs
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=Gjuy
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"Here are eight fairly small fixes collected over the last two weeks.
Regression and crashing bug fixes:
- mlx4/5: Fixes for issues found from various checkers
- A resource tracking and uverbs regression in the core code
- qedr: NULL pointer regression found during testing
- rxe: Various small bugs"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
IB/rxe: Fix missing completion for mem_reg work requests
RDMA/core: Save kernel caller name when creating CQ using ib_create_cq()
IB/uverbs: Fix ordering of ucontext check in ib_uverbs_write
IB/mlx4: Fix an error handling path in 'mlx4_ib_rereg_user_mr()'
RDMA/qedr: Fix NULL pointer dereference when running over iWARP without RDMA-CM
IB/mlx5: Fix return value check in flow_counters_set_data()
IB/mlx5: Fix memory leak in mlx5_ib_create_flow
IB/rxe: avoid double kfree skb
Put all relevant checks for transport domain in the
mlx5_ib_alloc/dealloc_transport_domain functions.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Expose DEVX tree to be used by upper layers.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Return the matching device EQN for a given user vector number via the
DEVX interface.
Note:
EQs are owned by the kernel and shared by all user processes.
Basically, a user CQ can point to any EQ.
The kernel doesn't enforce any such limitation today either.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add support to register a memory with the firmware via the DEVX
interface.
The driver translates a given user address to ib_umem then it will
register the physical addresses with the firmware and get a unique id
for this registration to be used for this virtual address.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Return a device UAR index for a given user index via the DEVX interface.
Security note:
The hardware protection mechanism works like this: Each device object that
is subject to UAR doorbells (QP/SQ/CQ) gets a UAR ID (called uar_page in
the device specification manual) upon its creation. Then upon doorbell,
hardware fetches the object context for which the doorbell was rang, and
validates that the UAR through which the DB was rang matches the UAR ID
of the object.
If no match the doorbell is silently ignored by the hardware. Of
course, the user cannot ring a doorbell on a UAR that was not mapped to
it.
Now in devx, as the devx kernel does not manipulate the QP/SQ/CQ command
mailboxes (except tagging them with UID), we expose to the user its UAR
ID, so it can embed it in these objects in the expected specification
format. So the only thing the user can do is hurt itself by creating a
QP/SQ/CQ with a UAR ID other than his, and then in this case other users
may ring a doorbell on its objects.
The consequence of that will be that another user can schedule a QP/SQ
of the buggy user for execution (just insert it to the hardware schedule
queue or arm its CQ for event generation), no further harm is expected.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add support in DEVX for modify and query commands, the required lock is
taken (i.e. READ/WRITE) by the KABI infrastructure accordingly.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add support to create and destroy firmware objects via the DEVX
interface.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add support to run general firmware command via the DEVX interface.
A command that works on some object (e.g. CQ, WQ, etc.) will be added
in next patches while maintaining the required object lock.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Introduce DEVX to enable direct device commands in downstream patches
from this series.
In that mode of work the firmware manages the isolation between
processes' resources and as such a DEVX user id is created and assigned
to the given user context upon allocation request.
A capability check is done to make sure that this feature is really
supported by the firmware prior to creating the DEVX user id.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch replaces the ib_device_attr.max_sge with max_send_sge and
max_recv_sge. It allows ulps to take advantage of devices that have very
different send and recv sge depths. For example cxgb4 has a max_recv_sge
of 4, yet a max_send_sge of 16. Splitting out these attributes allows
much more efficient use of the SQ for cxgb4 with ulps that use the RDMA_RW
API. Consider a large RDMA WRITE that has 16 scattergather entries.
With max_sge of 4, the ulp would send 4 WRITE WRs, but with max_sge of
16, it can be done with 1 WRITE WR.
Acked-by: Sagi Grimberg <sagi@grimberg.me>
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The core code now ensures that all driver callbacks that receive an
rdma_ah_attrs will have a sgid_attr's pointer if there is a GRH present.
Drivers can use this pointer instead of calling a query function with
sgid_index. This simplifies the drivers and also avoids races where a
gid_index lookup may return different data if it is changed.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Now that ib_gid_attr contains the GID, make use of that in the add_gid()
callback functions for the provider drivers to simplify the add_gid()
implementations.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In case of error, the function mlx5_fc_create() returns ERR_PTR() and
never returns NULL. The NULL test in the return value check should be
replaced with IS_ERR().
Fixes: 3b3233fbf0 ("IB/mlx5: Add flow counters binding support")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In case memory resources for *ucmd* were allocated, release them
before return.
Addresses-Coverity-ID: 1469857 ("Resource leak")
Fixes: 3b3233fbf0 ("IB/mlx5: Add flow counters binding support")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This has been a quiet cycle for RDMA, the big bulk is the usual smallish
driver updates and bug fixes. About four new uAPI related things. Not as much
Szykaller patches this time, the bugs it finds are getting harder to fix.
- More work cleaning up the RDMA CM code
- Usual driver bug fixes and cleanups for qedr, qib, hfi1, hns, i40iw, iw_cxgb4, mlx5, rxe
- Driver specific resource tracking and reporting via netlink
- Continued work for name space support from Parav
- MPLS support for the verbs flow steering uAPI
- A few tricky IPoIB fixes improving robustness
- HFI1 driver support for the '16B' management packet format
- Some auditing to not print kernel pointers via %llx or similar
- Mark the entire 'UCM' user-space interface as BROKEN with the intent to remove it
entirely. The user space side of this was long ago replaced with RDMA-CM and
syzkaller is finding bugs in the residual UCM interface nobody wishes to fix because
nobody uses it.
- Purge more bogus BUG_ON's from Leon
- 'flow counters' verbs uAPI
- T10 fixups for iser/isert, these are Acked by Martin but going through the RDMA
tree due to dependencies
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=Mb8m
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"This has been a quiet cycle for RDMA, the big bulk is the usual
smallish driver updates and bug fixes. About four new uAPI related
things. Not as much Szykaller patches this time, the bugs it finds are
getting harder to fix.
Summary:
- More work cleaning up the RDMA CM code
- Usual driver bug fixes and cleanups for qedr, qib, hfi1, hns,
i40iw, iw_cxgb4, mlx5, rxe
- Driver specific resource tracking and reporting via netlink
- Continued work for name space support from Parav
- MPLS support for the verbs flow steering uAPI
- A few tricky IPoIB fixes improving robustness
- HFI1 driver support for the '16B' management packet format
- Some auditing to not print kernel pointers via %llx or similar
- Mark the entire 'UCM' user-space interface as BROKEN with the
intent to remove it entirely. The user space side of this was long
ago replaced with RDMA-CM and syzkaller is finding bugs in the
residual UCM interface nobody wishes to fix because nobody uses it.
- Purge more bogus BUG_ON's from Leon
- 'flow counters' verbs uAPI
- T10 fixups for iser/isert, these are Acked by Martin but going
through the RDMA tree due to dependencies"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (138 commits)
RDMA/mlx5: Update SPDX tags to show proper license
RDMA/restrack: Change SPDX tag to properly reflect license
IB/hfi1: Fix comment on default hdr entry size
IB/hfi1: Rename exp_lock to exp_mutex
IB/hfi1: Add bypass register defines and replace blind constants
IB/hfi1: Remove unused variable
IB/hfi1: Ensure VL index is within bounds
IB/hfi1: Fix user context tail allocation for DMA_RTAIL
IB/hns: Use zeroing memory allocator instead of allocator/memset
infiniband: fix a possible use-after-free bug
iw_cxgb4: add INFINIBAND_ADDR_TRANS dependency
IB/isert: use T10-PI check mask definitions from core layer
IB/iser: use T10-PI check mask definitions from core layer
RDMA/core: introduce check masks for T10-PI offload
IB/isert: fix T10-pi check mask setting
IB/mlx5: Add counters read support
IB/mlx5: Add flow counters read support
IB/mlx5: Add flow counters binding support
IB/mlx5: Add counters create and destroy support
IB/uverbs: Add support for flow counters
...
Mellanox code is supposed to be OpenIB compliant code,
so let's update SPDX tags to show it.
Fixes: fc385b7ac4 ("IB/mlx5: Add basic regiser/unregister representors code")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This series comes to allow user space applications to monitor real time
traffic activity and events of the verbs objects it manages, e.g.:
ibv_qp, ibv_wq, ibv_flow.
This API enables generic counters creation and define mapping
to association with a verbs object, current mlx5 driver using
this API for flow counters.
With this API, an application can monitor the entire life cycle of
object activity, defined here as a static counters attachment.
This API also allows dynamic counters monitoring of measurement points
for a partial period in the verbs object life cycle.
In addition it presents the implementation of the generic counters interface.
This will be achieved by extending flow creation by adding a new flow count
specification type which allows the user to associate a previously created
flow counters using the generic verbs counters interface to the created flow,
once associated the user could read statistics by using the read function of
the generic counters interface.
The API includes:
1. create and destroyed API of a new counters objects
2. read the counters values from HW
Note:
Attaching API to allow application to define the measurement points per objects
is a user space only API and this data is passed to kernel when the counted
object (e.g. flow) is created with the counters object.
-----BEGIN PGP SIGNATURE-----
iHQEABYIAB0WIQT1m3YD37UfMCUQBNwp8NhrnBAZsQUCWxIiqQAKCRAp8NhrnBAZ
sWJRAPYl06nEfQjRlW//ZE/pO2oKXbfEevg7nnbpe80ERlxLAQDA2LHAcU7ma/NC
hS5yxIq1gLSA27N+5qAoFVK8vJ5ZCg==
=EiAV
-----END PGP SIGNATURE-----
Merge tag 'verbs_flow_counters' of git://git.kernel.org/pub/scm/linux/kernel/git/leon/linux-rdma.git into for-next
Pull verbs counters series from Leon Romanovsky:
====================
Verbs flow counters support
This series comes to allow user space applications to monitor real time
traffic activity and events of the verbs objects it manages, e.g.: ibv_qp,
ibv_wq, ibv_flow.
The API enables generic counters creation and define mapping to
association with a verbs object, the current mlx5 driver is using this API
for flow counters.
With this API, an application can monitor the entire life cycle of object
activity, defined here as a static counters attachment. This API also
allows dynamic counters monitoring of measurement points for a partial
period in the verbs object life cycle.
In addition it presents the implementation of the generic counters
interface.
This will be achieved by extending flow creation by adding a new flow
count specification type which allows the user to associate a previously
created flow counters using the generic verbs counters interface to the
created flow, once associated the user could read statistics by using the
read function of the generic counters interface.
The API includes:
1. create and destroyed API of a new counters objects
2. read the counters values from HW
Note:
Attaching API to allow application to define the measurement points per
objects is a user space only API and this data is passed to kernel when
the counted object (e.g. flow) is created with the counters object.
===================
* tag 'verbs_flow_counters':
IB/mlx5: Add counters read support
IB/mlx5: Add flow counters read support
IB/mlx5: Add flow counters binding support
IB/mlx5: Add counters create and destroy support
IB/uverbs: Add support for flow counters
IB/core: Add support for flow counters
IB/core: Support passing uhw for create_flow
IB/uverbs: Add read counters support
IB/core: Introduce counters read verb
IB/uverbs: Add create/destroy counters support
IB/core: Introduce counters object and its create/destroy
IB/uverbs: Add an ib_uobject getter to ioctl() infrastructure
net/mlx5: Export flow counter related API
net/mlx5: Use flow counter pointer as input to the query function
This patch implements the uverbs counters read API, it will use the
specific read counters function to the given type to accomplish its
task.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Raed Salem <raeds@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Associates a counters with a flow when IB_FLOW_SPEC_ACTION_COUNT is part
of the flow specifications.
The counters user space placements of location and description (index,
description) pairs are passed as private data of the counters flow
specification.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Raed Salem <raeds@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch implements the device counters create and destroy APIs and
introducing some internal management structures.
Downstream patches in this series will add the functionality to support
flow counters binding and reading.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Raed Salem <raeds@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This is required when user-space drivers need to pass extra information
regarding how to handle this flow steering specification.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There is no need to check return value of zap_vma_ptes()
because there is nothing to do with this knowledge.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch hoisted the common process of disassociate_ucontext
callback function into ib core code, and these code are common
to ervery ib_device driver.
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Leon Romanovsky says:
====================
Introduce new internal to mlx5 CQE format - mini-CQE. It is a CQE in
compressed form that holds data needed to extra a single full CQE.
It is a stride index, byte count and packet checksum.
====================
* mini_cqe:
IB/mlx5: Introduce a new mini-CQE format
IB/mlx5: Refactor CQE compression response
net/mlx5: Exposing a new mini-CQE format
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The new mini-CQE format includes the stride index, byte count and
packet checksum.
Stride index is needed for striding WQ feature.
This patch exposes this capability and enables its setting
via mlx5 UHW data as part of query device and cq creation.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Guy Levi <guyle@mellanox.com>
Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Refactor CQE compression response to be fully set only
when it`s really supported. There is no change from user
perspective because anyway resp.cqe_comp_caps.max_num was
set to zero.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com>W
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Update mlx4 to support user MR creation against read-only memory, previously
it required the memory to be writable.
Based on rdma for-rc due to dependencies.
* mr_fix: (2 commits)
IB/mlx4: Mark user MR as writable if actual virtual memory is writable
IB/core: Make testing MR flags for writability a static inline function
- Remove bouncing addresses from the MAINTAINERS file
- Kernel oops and bad error handling fixes for hfi, i40iw, cxgb4, and hns drivers
- Various small LOC behavioral/operational bugs in mlx5, hns, qedr and i40iw drivers
- Two fixes for patches already sent during the merge window
- A long standing bug related to not decreasing the pinned pages count in the right
MM was found and fixed
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=uFZh
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"This is pretty much just the usual array of smallish driver bugs.
- remove bouncing addresses from the MAINTAINERS file
- kernel oops and bad error handling fixes for hfi, i40iw, cxgb4, and
hns drivers
- various small LOC behavioral/operational bugs in mlx5, hns, qedr
and i40iw drivers
- two fixes for patches already sent during the merge window
- a long-standing bug related to not decreasing the pinned pages
count in the right MM was found and fixed"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (28 commits)
RDMA/hns: Move the location for initializing tmp_len
RDMA/hns: Bugfix for cq record db for kernel
IB/uverbs: Fix uverbs_attr_get_obj
RDMA/qedr: Fix doorbell bar mapping for dpi > 1
IB/umem: Use the correct mm during ib_umem_release
iw_cxgb4: Fix an error handling path in 'c4iw_get_dma_mr()'
RDMA/i40iw: Avoid panic when reading back the IRQ affinity hint
RDMA/i40iw: Avoid reference leaks when processing the AEQ
RDMA/i40iw: Avoid panic when objects are being created and destroyed
RDMA/hns: Fix the bug with NULL pointer
RDMA/hns: Set NULL for __internal_mr
RDMA/hns: Enable inner_pa_vld filed of mpt
RDMA/hns: Set desc_dma_addr for zero when free cmq desc
RDMA/hns: Fix the bug with rq sge
RDMA/hns: Not support qp transition from reset to reset for hip06
RDMA/hns: Add return operation when configured global param fail
RDMA/hns: Update convert function of endian format
RDMA/hns: Load the RoCE dirver automatically
RDMA/hns: Bugfix for rq record db for kernel
RDMA/hns: Add rq inline flags judgement
...
mlx5 core dirver updates for both net-next and rdma-next branches.
From Christophe JAILLET, first three patche to use kvfree where needed.
From: Or Gerlitz <ogerlitz@mellanox.com>
Next six patches from Roi and Co adds support for merged
sriov e-switch which comes to serve cases where both PFs, VFs set
on them and both uplinks are to be used in single v-switch SW model.
When merged e-switch is supported, the per-port e-switch is logically
merged into one e-switch that spans both physical ports and all the VFs.
This model allows to offload TC eswitch rules between VFs belonging
to different PFs (and hence have different eswitch affinity), it also
sets the some of the foundations needed for uplink LAG support.
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJa/fLEAAoJEEg/ir3gV/o+7jUH/3n5/Uw1LLt3TfeKArx6i0F1
3G4U5B0ha03qiDqXprwhyQ3I6lgYmRBmjcxnqmvcqOAqO4/hSsjtTR+A/mgbEDhJ
YtdekFNEX+72h/N2GIpZwChIWSE3EcMPaLYnV8TwLUgh9YSust2sCLSBbJCjxOKc
j78M8ept/bXZwTm/iJhEjtmqw0xl91rl011chCAua0iEpH3wxteDARmKABFHMQxl
I3N/x/e/astgcSCNgpO4uDf9zEIRkNdzcHPzSMJ6C2Oo5W9XiZEekfw7WKj9nXfa
G+eGckkAyCOQ/r2lZ9nA0ZUvQ2X6JISvxgohuaCNwTgsz3acTxbLnQK4YWHzQCQ=
=iHi6
-----END PGP SIGNATURE-----
Merge tag 'mlx5-updates-2018-05-17' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux into for-next
mlx5-updates-2018-05-17
mlx5 core dirver updates for both net-next and rdma-next branches.
From Christophe JAILLET, first three patche to use kvfree where needed.
From: Or Gerlitz <ogerlitz@mellanox.com>
Next six patches from Roi and Co adds support for merged
sriov e-switch which comes to serve cases where both PFs, VFs set
on them and both uplinks are to be used in single v-switch SW model.
When merged e-switch is supported, the per-port e-switch is logically
merged into one e-switch that spans both physical ports and all the VFs.
This model allows to offload TC eswitch rules between VFs belonging
to different PFs (and hence have different eswitch affinity), it also
sets the some of the foundations needed for uplink LAG support.
* tag 'mlx5-updates-2018-05-17' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
net/mlx5e: Explicitly set source e-switch in offloaded TC rules
net/mlx5: Add source e-switch owner
net/mlx5e: Explicitly set destination e-switch in FDB rules
net/mlx5: Add destination e-switch owner
net/mlx5: Properly handle a vport destination when setting FTE
net/mlx5: Add merged e-switch cap
IB/mlx5: Use 'kvfree()' for memory allocated by 'kvzalloc()'
net/mlx5: Eswitch, Use 'kvfree()' for memory allocated by 'kvzalloc()'
net/mlx5: Vport, Use 'kvfree()' for memory allocated by 'kvzalloc()'
On fatal error the driver simulates CQE's for ULPs that rely on
completion of all their posted work-request.
For the GSI traffic, the mlx5 has its own mechanism that sends the
completions via software CQE's directly to the relevant CQ.
This should be kept in fatal error too, so the driver should simulate
such CQE's with the specified error state in order to complete GSI QP
work requests.
Without the fix the next deadlock might appears:
schedule_timeout+0x274/0x350
wait_for_common+0xec/0x240
mcast_remove_one+0xd0/0x120 [ib_core]
ib_unregister_device+0x12c/0x230 [ib_core]
mlx5_ib_remove+0xc4/0x270 [mlx5_ib]
mlx5_detach_device+0x184/0x1a0 [mlx5_core]
mlx5_unload_one+0x308/0x340 [mlx5_core]
mlx5_pci_err_detected+0x74/0xe0 [mlx5_core]
Cc: <stable@vger.kernel.org> # 4.7
Fixes: 89ea94a7b6 ("IB/mlx5: Reset flow support for IB kernel ULPs")
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Remove various prints of VMA pointers.
Reported-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Michal Kalderon <michal.kalderon@cavium.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
mlx5 core dirver updates for both net-next and rdma-next branches.
From Christophe JAILLET, first three patche to use kvfree where needed.
From: Or Gerlitz <ogerlitz@mellanox.com>
Next six patches from Roi and Co adds support for merged
sriov e-switch which comes to serve cases where both PFs, VFs set
on them and both uplinks are to be used in single v-switch SW model.
When merged e-switch is supported, the per-port e-switch is logically
merged into one e-switch that spans both physical ports and all the VFs.
This model allows to offload TC eswitch rules between VFs belonging
to different PFs (and hence have different eswitch affinity), it also
sets the some of the foundations needed for uplink LAG support.
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJa/fLEAAoJEEg/ir3gV/o+7jUH/3n5/Uw1LLt3TfeKArx6i0F1
3G4U5B0ha03qiDqXprwhyQ3I6lgYmRBmjcxnqmvcqOAqO4/hSsjtTR+A/mgbEDhJ
YtdekFNEX+72h/N2GIpZwChIWSE3EcMPaLYnV8TwLUgh9YSust2sCLSBbJCjxOKc
j78M8ept/bXZwTm/iJhEjtmqw0xl91rl011chCAua0iEpH3wxteDARmKABFHMQxl
I3N/x/e/astgcSCNgpO4uDf9zEIRkNdzcHPzSMJ6C2Oo5W9XiZEekfw7WKj9nXfa
G+eGckkAyCOQ/r2lZ9nA0ZUvQ2X6JISvxgohuaCNwTgsz3acTxbLnQK4YWHzQCQ=
=iHi6
-----END PGP SIGNATURE-----
Merge tag 'mlx5-updates-2018-05-17' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Saeed Mahameed says:
====================
mlx5-updates-2018-05-17
mlx5 core dirver updates for both net-next and rdma-next branches.
From Christophe JAILLET, first three patche to use kvfree where needed.
From: Or Gerlitz <ogerlitz@mellanox.com>
Next six patches from Roi and Co adds support for merged
sriov e-switch which comes to serve cases where both PFs, VFs set
on them and both uplinks are to be used in single v-switch SW model.
When merged e-switch is supported, the per-port e-switch is logically
merged into one e-switch that spans both physical ports and all the VFs.
This model allows to offload TC eswitch rules between VFs belonging
to different PFs (and hence have different eswitch affinity), it also
sets the some of the foundations needed for uplink LAG support.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch reports the device's capbilities to offload
encapsulated MPLS tunnel protocols to user-space:
- Capability to offload MPLS over GRE.
- Capability to offload MPLS over UDP.
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch introduces support for the MPLS flow spec and
allows the creation of rules that are matching on the
MPLS label.
Applying the rule matching depends on the flow specs order and
the location of the MPLS in the spec list as there are different
configurations to be made in the device in the cases of MPLSoGRE
and MPLSoUDP vs. non-encapsulated MPLS.
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch introduces support for the GRE flow spec and
allowing the creation of rules based on the protocol and
key fields that are part of GRE protocol header.
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When 'kvzalloc()' is used to allocate memory, 'kvfree()' must be used to
free it.
Fixes: 1cbe6fc86c ("IB/mlx5: Add support for CQE compressing")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Several items of conflict have arisen between the RDMA stack's for-rc
branch and upcoming for-next work:
9fd4350ba8 ("IB/rxe: avoid double kfree_skb") directly conflicts with
2e47350789 ("IB/rxe: optimize the function duplicate_request")
Patches already submitted by Intel for the hfi1 driver will fail to
apply cleanly without this merge
Other people on the mailing list have notified that their upcoming
patches also fail to apply cleanly without this merge
Signed-off-by: Doug Ledford <dledford@redhat.com>
As most kernel RDMA ULPs, (e.g. NVMe over Fabrics in its default
"register_always=Y" mode) registers and invalidates user buffer
upon each IO.
Today the mlx5 driver is posting the registration work
request using scatter/gather entry for the MTT/KLM list.
The fetch of the MTT/KLM list becomes the bottleneck in
number of IO operation could be done by NVMe over Fabrics
host driver on a single adapter as shown below.
This patch is adding the support for inline registration
work request upon MTT/KLM list of size <=64B.
The result for NVMe over Fabrics is increase of > x3.5 for small
IOs as shown below, I expect other ULPs (e.g iSER, SRP, NFS over RDMA)
performance to be enhanced as well.
The following results were taken against a single NVMe-oF (RoCE link layer)
subsystem with a single namespace backed by null_blk using fio benchmark
(with rw=randread, numjobs=48, iodepth={16,64}, ioengine=libaio direct=1):
ConnectX-5 (pci Width x16)
---------------------------
Block Size s/g reg_wr inline reg_wr
++++++++++ +++++++++++++++ ++++++++++++++++
512B 1302.8K/34.82% 4951.9K/99.02%
1KB 1284.3K/33.86% 4232.7K/98.09%
2KB 1238.6K/34.1% 2797.5K/80.04%
4KB 1169.3K/32.46% 1941.3K/61.35%
8KB 1013.4K/30.08% 1236.6K/39.47%
16KB 695.7K/20.19% 696.9K/20.59%
32KB 350.3K/9.64% 350.6K/10.3%
64KB 175.86K/5.27% 175.9K/5.28%
ConnectX-4 (pci Width x8)
---------------------------
Block Size s/g reg_wr inline reg_wr
++++++++++ +++++++++++++++ ++++++++++++++++
512B 1285.8K/42.66% 4242.7K/98.18%
1KB 1254.1K/41.74% 3569.2K/96.00%
2KB 1185.9K/39.83% 2173.9K/75.58%
4KB 1069.4K/36.46% 1343.3K/47.47%
8KB 755.1K/27.77% 748.7K/29.14%
Tested-by: Nitzan Carmi <nitzanc@mellanox.com>
Signed-off-by: Idan Burstein <idanb@mellanox.com>
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Flow label is defined as u32 in the in ipv6 flow spec, but
used internally in the flow specs parsing as u8. That was
causing loss of part of flow_label value.
Fixes: 2d1e697e9b ('IB/mlx5: Add support to match inner packet fields')
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Daria Velikovsky <daria@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
User can leave system without medium BlueFlames registers,
however the code assumed that at least one such register exists.
This patch fixes that assumption.
Fixes: c1be5232d2 ("IB/mlx5: Fix micro UAR allocator")
Reported-by: Rohit Zambre <rzambre@uci.edu>
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
- Various build fixes (USER_ACCESS=m and ADDR_TRANS turned off)
- SPDX license tag cleanups (new tag Linux-OpenIB)
- RoCE GID fixes related to default GIDs
- Various fixes to: cxgb4, uverbs, cma, iwpm, rxe, hns (big batch),
mlx4, mlx5, and hfi1 (medium batch)
-----BEGIN PGP SIGNATURE-----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=PI8v
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Doug Ledford:
"This is our first pull request of the rc cycle. It's not that it's
been overly quiet, we were just waiting on a few things before sending
this off.
For instance, the 6 patch series from Intel for the hfi1 driver had
actually been pulled in on Tuesday for a Wednesday pull request, only
to have Jason notice something I missed, so we held off for some
testing, and then on Thursday had to respin the series because the
very first patch needed a minor fix (unnecessary cast is all).
There is a sizable hns patch series in here, as well as a reasonably
largish hfi1 patch series, then all of the lines of uapi updates are
just the change to the new official Linux-OpenIB SPDX tag (a bunch of
our files had what amounts to a BSD-2-Clause + MIT Warranty statement
as their license as a result of the initial code submission years ago,
and the SPDX folks decided it was unique enough to warrant a unique
tag), then the typical mlx4 and mlx5 updates, and finally some cxgb4
and core/cache/cma updates to round out the bunch.
None of it was overly large by itself, but in the 2 1/2 weeks we've
been collecting patches, it has added up :-/.
As best I can tell, it's been through 0day (I got a notice about my
last for-next push, but not for my for-rc push, but Jason seems to
think that failure messages are prioritized and success messages not
so much). It's also been through linux-next. And yes, we did notice in
the context portion of the CMA query gid fix patch that there is a
dubious BUG_ON() in the code, and have plans to audit our BUG_ON usage
and remove it anywhere we can.
Summary:
- Various build fixes (USER_ACCESS=m and ADDR_TRANS turned off)
- SPDX license tag cleanups (new tag Linux-OpenIB)
- RoCE GID fixes related to default GIDs
- Various fixes to: cxgb4, uverbs, cma, iwpm, rxe, hns (big batch),
mlx4, mlx5, and hfi1 (medium batch)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (52 commits)
RDMA/cma: Do not query GID during QP state transition to RTR
IB/mlx4: Fix integer overflow when calculating optimal MTT size
IB/hfi1: Fix memory leak in exception path in get_irq_affinity()
IB/{hfi1, rdmavt}: Fix memory leak in hfi1_alloc_devdata() upon failure
IB/hfi1: Fix NULL pointer dereference when invalid num_vls is used
IB/hfi1: Fix loss of BECN with AHG
IB/hfi1 Use correct type for num_user_context
IB/hfi1: Fix handling of FECN marked multicast packet
IB/core: Make ib_mad_client_id atomic
iw_cxgb4: Atomically flush per QP HW CQEs
IB/uverbs: Fix kernel crash during MR deregistration flow
IB/uverbs: Prevent reregistration of DM_MR to regular MR
RDMA/mlx4: Add missed RSS hash inner header flag
RDMA/hns: Fix a couple misspellings
RDMA/hns: Submit bad wr
RDMA/hns: Update assignment method for owner field of send wqe
RDMA/hns: Adjust the order of cleanup hem table
RDMA/hns: Only assign dqpn if IB_QP_PATH_DEST_QPN bit is set
RDMA/hns: Remove some unnecessary attr_mask judgement
RDMA/hns: Only assign mtu if IB_QP_PATH_MTU bit is set
...
Starting from commit 72f36be061 ("net/mlx5: Fix mlx5_get_uars_page to
return error code") the mlx5_get_uars_page() call returns error in case
of failure, but it was mistakenly overlooked in the merge commit.
Fixes: e7996a9a77 ("Merge tag v4.15 of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git")
Reported-by: Alaa Hleihel <alaa@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In commit bcf87f1dbb ("IB/mlx5: Listen to netdev register/unresiter events in switchdev mode")
incorrectly mapped primary device's netdevice to 2nd port netdevice.
It always represented primary port's netdevice for 2nd port netdevice
when ib representors were not used.
This results into failing to process CM request arriving on 2nd port due
to incorrect mapping of netdevice.
This fix corrects it by considering the right mdev.
Cc: <stable@vger.kernel.org> # 4.16
Fixes: bcf87f1dbb ("IB/mlx5: Listen to netdev register/unresiter events in switchdev mode")
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Before the change, if the user passed a static rate value different
than zero and the FW doesn't support static rate,
it would end up configuring rate of 2.5 GBps.
Fix this by using rate 0; unlimited, in cases where FW
doesn't support static rate configuration.
Cc: <stable@vger.kernel.org> # 3.10
Fixes: e126ba97db ("mlx5: Add driver for Mellanox Connect-IB adapters")
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Danit Goldberg <danitg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Failure in rereg MR releases UMEM but leaves the MR to be destroyed
by the user. As a result the following scenario may happen:
"create MR -> rereg MR with failure -> call to rereg MR again" and
hit "NULL-ptr deref or user memory access" errors.
Ensure that rereg MR is only performed on a non-dead MR.
Cc: syzkaller <syzkaller@googlegroups.com>
Cc: <stable@vger.kernel.org> # 4.5
Fixes: 395a8e4c32 ("IB/mlx5: Refactoring register MR code")
Reported-by: Noa Osherovich <noaos@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Adding the vector offset when calling to mlx5_vector2eqn() is wrong.
This is because mlx5_vector2eqn() checks if EQ index is equal to vector number
and the fact that the internal completion vectors that mlx5 allocates
don't get an EQ index.
The second problem here is that using effective_affinity_mask gives the same
CPU for different vectors.
This leads to unmapped queues when calling it from blk_mq_rdma_map_queues().
This doesn't happen when using affinity_hint mask.
Fixes: 2572cf57d7 ("mlx5: fix mlx5_get_vector_affinity to start from completion vector 0")
Fixes: 05e0cc84e0 ("net/mlx5: Fix get vector affinity helper function")
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Fix build errors when INFINIBAND_USER_ACCESS=m and MLX5_INFINIBAND=y.
The build error occurs when the mlx5 driver code attempts to use
USER_ACCESS interfaces, which are built as a loadable module.
Fixes these build errors:
drivers/infiniband/hw/mlx5/main.o: In function `populate_specs_root':
../drivers/infiniband/hw/mlx5/main.c:4982: undefined reference to `uverbs_default_get_objects'
../drivers/infiniband/hw/mlx5/main.c:4994: undefined reference to `uverbs_alloc_spec_tree'
drivers/infiniband/hw/mlx5/main.o: In function `depopulate_specs_root':
../drivers/infiniband/hw/mlx5/main.c:5001: undefined reference to `uverbs_free_spec_tree'
Build-tested with multiple config combinations.
Fixes: 8c84660bb4 ("IB/mlx5: Initialize the parsing tree root without the help of uverbs")
Cc: stable@vger.kernel.org # reported against 4.16
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The header file fs_helpers.h is included twice. So it should be removed.
Fixes: 802c212568 ("IB/mlx5: Add IPsec support for egress and ingress")
CC: Srinivas Eeda <srinivas.eeda@oracle.com>
CC: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
- Fix RDMA uapi headers to actually compile in userspace and be more
complete
- Three shared with netdev pull requests from Mellanox:
* 7 patches, mostly to net with 1 IB related one at the back). This
series addresses an IRQ performance issue (patch 1), cleanups related to
the fix for the IRQ performance problem (patches 2-6), and then extends
the fragmented completion queue support that already exists in the net
side of the driver to the ib side of the driver (patch 7).
* Mostly IB, with 5 patches to net that are needed to support the remaining
10 patches to the IB subsystem. This series extends the current
'representor' framework when the mlx5 driver is in switchdev mode from
being a netdev only construct to being a netdev/IB dev construct. The IB
dev is limited to raw Eth queue pairs only, but by having an IB dev of
this type attached to the representor for a switchdev port, it enables
DPDK to work on the switchdev device.
* All net related, but needed as infrastructure for the rdma driver
- Updates for the hns, i40iw, bnxt_re, cxgb3, cxgb4, hns drivers
- SRP performance updates
- IB uverbs write path cleanup patch series from Leon
- Add RDMA_CM support to ib_srpt. This is disabled by default. Users need to
set the port for ib_srpt to listen on in configfs in order for it to be
enabled (/sys/kernel/config/target/srpt/discovery_auth/rdma_cm_port)
- TSO and Scatter FCS support in mlx4
- Refactor of modify_qp routine to resolve problems seen while working on new
code that is forthcoming
- More refactoring and updates of RDMA CM for containers support from Parav
- mlx5 'fine grained packet pacing', 'ipsec offload' and 'device memory'
user API features
- Infrastructure updates for the new IOCTL interface, based on increased usage
- ABI compatibility bug fixes to fully support 32 bit userspace on 64 bit
kernel as was originally intended. See the commit messages for
extensive details
- Syzkaller bugs and code cleanups motivated by them
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=Ku8g
-----END PGP SIGNATURE-----
Merge tag 'for-linus-unmerged' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"Doug and I are at a conference next week so if another PR is sent I
expect it to only be bug fixes. Parav noted yesterday that there are
some fringe case behavior changes in his work that he would like to
fix, and I see that Intel has a number of rc looking patches for HFI1
they posted yesterday.
Parav is again the biggest contributor by patch count with his ongoing
work to enable container support in the RDMA stack, followed by Leon
doing syzkaller inspired cleanups, though most of the actual fixing
went to RC.
There is one uncomfortable series here fixing the user ABI to actually
work as intended in 32 bit mode. There are lots of notes in the commit
messages, but the basic summary is we don't think there is an actual
32 bit kernel user of drivers/infiniband for several good reasons.
However we are seeing people want to use a 32 bit user space with 64
bit kernel, which didn't completely work today. So in fixing it we
required a 32 bit rxe user to upgrade their userspace. rxe users are
still already quite rare and we think a 32 bit one is non-existing.
- Fix RDMA uapi headers to actually compile in userspace and be more
complete
- Three shared with netdev pull requests from Mellanox:
* 7 patches, mostly to net with 1 IB related one at the back).
This series addresses an IRQ performance issue (patch 1),
cleanups related to the fix for the IRQ performance problem
(patches 2-6), and then extends the fragmented completion queue
support that already exists in the net side of the driver to the
ib side of the driver (patch 7).
* Mostly IB, with 5 patches to net that are needed to support the
remaining 10 patches to the IB subsystem. This series extends
the current 'representor' framework when the mlx5 driver is in
switchdev mode from being a netdev only construct to being a
netdev/IB dev construct. The IB dev is limited to raw Eth queue
pairs only, but by having an IB dev of this type attached to the
representor for a switchdev port, it enables DPDK to work on the
switchdev device.
* All net related, but needed as infrastructure for the rdma
driver
- Updates for the hns, i40iw, bnxt_re, cxgb3, cxgb4, hns drivers
- SRP performance updates
- IB uverbs write path cleanup patch series from Leon
- Add RDMA_CM support to ib_srpt. This is disabled by default. Users
need to set the port for ib_srpt to listen on in configfs in order
for it to be enabled
(/sys/kernel/config/target/srpt/discovery_auth/rdma_cm_port)
- TSO and Scatter FCS support in mlx4
- Refactor of modify_qp routine to resolve problems seen while
working on new code that is forthcoming
- More refactoring and updates of RDMA CM for containers support from
Parav
- mlx5 'fine grained packet pacing', 'ipsec offload' and 'device
memory' user API features
- Infrastructure updates for the new IOCTL interface, based on
increased usage
- ABI compatibility bug fixes to fully support 32 bit userspace on 64
bit kernel as was originally intended. See the commit messages for
extensive details
- Syzkaller bugs and code cleanups motivated by them"
* tag 'for-linus-unmerged' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (199 commits)
IB/rxe: Fix for oops in rxe_register_device on ppc64le arch
IB/mlx5: Device memory mr registration support
net/mlx5: Mkey creation command adjustments
IB/mlx5: Device memory support in mlx5_ib
net/mlx5: Query device memory capabilities
IB/uverbs: Add device memory registration ioctl support
IB/uverbs: Add alloc/free dm uverbs ioctl support
IB/uverbs: Add device memory capabilities reporting
IB/uverbs: Expose device memory capabilities to user
RDMA/qedr: Fix wmb usage in qedr
IB/rxe: Removed GID add/del dummy routines
RDMA/qedr: Zero stack memory before copying to user space
IB/mlx5: Add ability to hash by IPSEC_SPI when creating a TIR
IB/mlx5: Add information for querying IPsec capabilities
IB/mlx5: Add IPsec support for egress and ingress
{net,IB}/mlx5: Add ipsec helper
IB/mlx5: Add modify_flow_action_esp verb
IB/mlx5: Add implementation for create and destroy action_xfrm
IB/uverbs: Introduce ESP steering match filter
IB/uverbs: Add modify ESP flow_action
...
Adding mlx5_ib driver implementation for reg_dm_mr callback
which allows registering device memory (DM) as an MR for
local and remote access.
Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This change updates the mlx5 interface to create mkey
on the device.
The updates in the command mailbox include increasing the
access mode type field to 5 bits in order to support additional
types such as MLX5_MKC_ACCESS_MODE_MEMIC which represents device
memory access type and will be used when registering MR on allocated
device memory.
All the places that use the old access mode format are adjusted as
well.
Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch adds the mlx5_ib driver implementation for the device
memory allocation API.
It implements the ib_device callbacks for allocation and deallocation
operations as well as a new mmap command support which allows mapping
an allocated device memory to a VMA.
The change also adds reporting of device memory maximum size and
alignment parameters reported in device capabilities.
The allocation/deallocation operations are using new firmware
commands to allocate MEMIC memory on the device.
Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When a Raw Ethernet QP is created, we actually create a few objects.
One of these objects is a TIR. Currently, a TIR could hash (and spread
the traffic) by IP or port only. Adding a hashing by IPSec SPI to TIR
creation with the required UAPI bit.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Users should be able to query for IPSec support. Adding a few
capabilities bits as part of the driver specific part in
alloc_ucontext:
MLX5_USER_ALLOC_UCONTEXT_FLOW_ACTION_FLAGS_ESP_AES_GCM_REQ_METADATA
Payload's header is returned with metadata representing the
IPSec decryption state.
MLX5_USER_ALLOC_UCONTEXT_FLOW_ACTION_FLAGS_ESP_AES_GCM_RX
Support ESP_AES_GCM in ingress path.
MLX5_USER_ALLOC_UCONTEXT_FLOW_ACTION_FLAGS_ESP_AES_GCM_TX
Support ESP_AES_GCM in egress path.
MLX5_USER_ALLOC_UCONTEXT_FLOW_ACTION_FLAGS_ESP_AES_GCM_SPI_RSS_ONLY
Hardware doesn't support matching SPI in flow steering rules
but just hashing and spreading the traffic accordingly.
Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This commit introduces support for the esp_aes_gcm flow
specification for the Innova device. To that end we add
support for egress steering and some validations that an
IPsec rule is indeed valid.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Adding implementation in mlx5 driver to modify action_xfrm object. This
merely call the accel layer. Currently a user can modify only the
ESN parameters.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Adding implementation in mlx5 driver to create and destroy action_xfrm
object. This merely call the accel layer.
A user may pass MLX5_IB_XFRM_FLAGS_REQUIRE_METADATA flag which states
that [s]he expects a metadata header to be added to the payload. This
header represents information regarding the transformation's state.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In order to have a custom parsing tree, a provider driver needs to
assign its parsing tree to ib_device specs_tree field. Otherwise, the
uverbs client assigns a common default parsing tree for it.
In downstream patches, the mlx5_ib driver gains a custom parsing tree,
which contains both the common objects and a new flags field for the
UVERBS_FLOW_ACTION_ESP_CREATE command.
This patch makes mlx5_ib assign its own tree to specs_root, which
later on will be extended.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Now that ib_gid_attr contains device, port and index, simplify the
provider APIs add_gid() and del_gid() to use device, port and index
fields from the ib_gid_attr attributes structure.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Now that IB core GID cache ensures that all RoCE entries have an
associated netdev remove null checks from the provider drivers for
clarity.
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This structure is pushed down the ex and the non-ex path, so it needs to be
aligned to 8 bytes to go through ex without implicit padding.
Old user space will provide 4 bytes of resp on !ex and 8 bytes on ex, so
take the approach of just copying the minimum length.
New user space will consistently provide 8 bytes in both cases.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Minor conflicts in drivers/net/ethernet/mellanox/mlx5/core/en_rep.c,
we had some overlapping changes:
1) In 'net' MLX5E_PARAMS_LOG_{SQ,RQ}_SIZE -->
MLX5E_REP_PARAMS_LOG_{SQ,RQ}_SIZE
2) In 'net-next' params->log_rq_size is renamed to be
params->log_rq_mtu_frames.
3) In 'net-next' params->hard_mtu is added.
Signed-off-by: David S. Miller <davem@davemloft.net>
Move mlx5_ib dump error CQE implementation to mlx5 CQ header file in
order to use it in a downstream patch from mlx5e.
In addition, use print_hex_dump instead of manual dumping of the buffer.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Move query SQ state function from mlx5_ib to mlx5_core in order to
have it in shared code.
It will be used in a downstream patch from mlx5e.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
In some firmware configuration, UMR usage from Virtual Functions is restricted.
This information is published to the driver using new capability bits.
Avoid using UMRs in these cases and use the Firmware slow-path flow to create
mkeys and populate them with Virtual to Physical address translation.
Older drivers that do not have this patch, will end up using memory keys that
aren't populated with Virtual to Physical address translation that is done
part of the UMR work.
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Tested-by: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When working with RC QPs, the FW sets the ECN capable bits for all
the RoCE v2 packets. On the other hand, for UD QPs, the driver needs
to set the the ECN capable bits in the Address Handler since the HW
generates each packet according to the Address Handler and not
the QP context.
If ECN is not enabled in NIC or switch, these bits are ignored.
Fixes: 2811ba51b0 ("IB/mlx5: Add RoCE fields to Address Vector")
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Fun set of conflict resolutions here...
For the mac80211 stuff, these were fortunately just parallel
adds. Trivially resolved.
In drivers/net/phy/phy.c we had a bug fix in 'net' that moved the
function phy_disable_interrupts() earlier in the file, whilst in
'net-next' the phy_error() call from this function was removed.
In net/ipv4/xfrm4_policy.c, David Ahern's changes to remove the
'rt_table_id' member of rtable collided with a bug fix in 'net' that
added a new struct member "rt_mtu_locked" which needs to be copied
over here.
The mlxsw driver conflict consisted of net-next separating
the span code and definitions into separate files, whilst
a 'net' bug fix made some changes to that moved code.
The mlx5 infiniband conflict resolution was quite non-trivial,
the RDMA tree's merge commit was used as a guide here, and
here are their notes:
====================
Due to bug fixes found by the syzkaller bot and taken into the for-rc
branch after development for the 4.17 merge window had already started
being taken into the for-next branch, there were fairly non-trivial
merge issues that would need to be resolved between the for-rc branch
and the for-next branch. This merge resolves those conflicts and
provides a unified base upon which ongoing development for 4.17 can
be based.
Conflicts:
drivers/infiniband/hw/mlx5/main.c - Commit 42cea83f95
(IB/mlx5: Fix cleanup order on unload) added to for-rc and
commit b5ca15ad7e (IB/mlx5: Add proper representors support)
add as part of the devel cycle both needed to modify the
init/de-init functions used by mlx5. To support the new
representors, the new functions added by the cleanup patch
needed to be made non-static, and the init/de-init list
added by the representors patch needed to be modified to
match the init/de-init list changes made by the cleanup
patch.
Updates:
drivers/infiniband/hw/mlx5/mlx5_ib.h - Update function
prototypes added by representors patch to reflect new function
names as changed by cleanup patch
drivers/infiniband/hw/mlx5/ib_rep.c - Update init/de-init
stage list to match new order from cleanup patch
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
In case we failed to create UMR resources, mark them as invalid so we
won't try to destroy them on the unwind path.
Add the relevant checks to destroy_umrc_res(), this is done for the
unlikely event ib_register_device() or create_umr_res() err out and we
try to destroy invalid objects.
Fixes: 42cea83f95 ("IB/mlx5: Fix cleanup order on unload")
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Extending uverbs_ioctl header with driver_id and another reserved
field. driver_id should be used in order to identify the driver.
Since every driver could have its own parsing tree, this is necessary
for strace support.
Downstream patches take off the EXPERIMENTAL flag from the ioctl() IB
support and thus we add some reserved fields for future usage.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Enable RAW QP to be able to configure burst control by modify_qp. By
using burst control with rate limiting, user can achieve best
performance and accuracy. The burst control information is passed by
user through udata.
This patch also reports burst control capability for mlx5 related
hardwares, burst control is only marked as supported when both
packet_pacing_burst_bound and packet_pacing_typical_size are
supported.
Signed-off-by: Bodong Wang <bodong@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Before commit f1b65df5a2 ("IB/mlx5: Add support for active_width and
active_speed in RoCE"), the mlx5_ib driver set the default active_width
and active_speed to IB_WIDTH_4X and IB_SPEED_QDR.
When the RoCE port is down, the RoCE port does not negotiate the active
width with the remote side, causing the active width to be zero. When
running userspace ibstat to view the port status, ibstat will panic as it
reads an invalid width from sys file.
This patch restores the original behavior.
Fixes: f1b65df5a2 ("IB/mlx5: Add support for active_width and active_speed in RoCE").
Signed-off-by: Honggang Li <honli@redhat.com>
Reviewed-by: Hal Rosenstock <hal@mellanox.com>
Reviewed-by: Noa Osherovich <noaos@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The failure to destroy the MRs is printed on mlx5_core layer
as error and it makes warning prints useless.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
"live" is needed for ODP only and is better to be guarded
by appropriate CONFIG.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
According to the IBTA spec 1.3, the driver failure in
MR reregister shall release old and new MRs.
C11-20: If the CI returns any other error, the CI shall
invalidate both "old" and "new" registrations, and release
any associated resources.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Return -EOPNOTSUPP value to the user for unsupported reg_user_mr.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The mlx5_ib_alloc_implicit_mr() can fail to acquire pages
and the returned mr pointer won't be valid. Ensure that it
is not error prior to access.
Cc: <stable@vger.kernel.org> # 4.10
Fixes: 81713d3788 ("IB/mlx5: Add implicit MR support")
Reported-by: Noa Osherovich <noaos@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Due to bug fixes found by the syzkaller bot and taken into the for-rc
branch after development for the 4.17 merge window had already started
being taken into the for-next branch, there were fairly non-trivial
merge issues that would need to be resolved between the for-rc branch
and the for-next branch. This merge resolves those conflicts and
provides a unified base upon which ongoing development for 4.17 can
be based.
Conflicts:
drivers/infiniband/hw/mlx5/main.c - Commit 42cea83f95
(IB/mlx5: Fix cleanup order on unload) added to for-rc and
commit b5ca15ad7e (IB/mlx5: Add proper representors support)
add as part of the devel cycle both needed to modify the
init/de-init functions used by mlx5. To support the new
representors, the new functions added by the cleanup patch
needed to be made non-static, and the init/de-init list
added by the representors patch needed to be modified to
match the init/de-init list changes made by the cleanup
patch.
Updates:
drivers/infiniband/hw/mlx5/mlx5_ib.h - Update function
prototypes added by representors patch to reflect new function
names as changed by cleanup patch
drivers/infiniband/hw/mlx5/ib_rep.c - Update init/de-init
stage list to match new order from cleanup patch
Signed-off-by: Doug Ledford <dledford@redhat.com>
On load we create private CQ/QP/PD in order to be used by UMR, we create
those resources after we register ourself as an IB device, and we destroy
them after we unregister as an IB device. This was changed by commit
16c1975f10 ("IB/mlx5: Create profile infrastructure to add and remove
stages") which moved the destruction before we unregistration. This
allowed to trigger an invalid memory access when unloading mlx5_ib while
there are open resources:
BUG: unable to handle kernel paging request at 00000001002c012c
...
Call Trace:
mlx5_ib_post_send_wait+0x75/0x110 [mlx5_ib]
__slab_free+0x9a/0x2d0
delay_time_func+0x10/0x10 [mlx5_ib]
unreg_umr.isra.15+0x4b/0x50 [mlx5_ib]
mlx5_mr_cache_free+0x46/0x150 [mlx5_ib]
clean_mr+0xc9/0x190 [mlx5_ib]
dereg_mr+0xba/0xf0 [mlx5_ib]
ib_dereg_mr+0x13/0x20 [ib_core]
remove_commit_idr_uobject+0x16/0x70 [ib_uverbs]
uverbs_cleanup_ucontext+0xe8/0x1a0 [ib_uverbs]
ib_uverbs_cleanup_ucontext.isra.9+0x19/0x40 [ib_uverbs]
ib_uverbs_remove_one+0x162/0x2e0 [ib_uverbs]
ib_unregister_device+0xd4/0x190 [ib_core]
__mlx5_ib_remove+0x2e/0x40 [mlx5_ib]
mlx5_remove_device+0xf5/0x120 [mlx5_core]
mlx5_unregister_interface+0x37/0x90 [mlx5_core]
mlx5_ib_cleanup+0xc/0x225 [mlx5_ib]
SyS_delete_module+0x153/0x230
do_syscall_64+0x62/0x110
entry_SYSCALL_64_after_hwframe+0x21/0x86
...
We restore the original behavior by breaking the UMR stage into two parts,
pre and post IB registration stages, this way we can restore the original
functionality and maintain clean separation of logic between stages.
Fixes: 16c1975f10 ("IB/mlx5: Create profile infrastructure to add and remove stages")
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The mlx5 driver needs to be able to issue invalidation to ODP MRs
even if it cannot allocate memory. To this end it preallocates
emergency pages to use when the situation arises.
This flow should be extremely rare enough, that we don't need
to worry about contention and therefore a single emergency page
is good enough.
Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Instead synchronizing RCU in a loop when removing mkeys in a batch do it
once at the end before freeing them. The result is only waiting for one
RCU grace period instead of many serially.
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch validates user provided input to prevent integer overflow due
to integer manipulation in the mlx5_ib_create_srq function.
Cc: syzkaller <syzkaller@googlegroups.com>
Fixes: e126ba97db ("mlx5: Add driver for Mellanox Connect-IB adapters")
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add a check for the length of the qpin structure to prevent out-of-bounds reads
BUG: KASAN: slab-out-of-bounds in create_raw_packet_qp+0x114c/0x15e2
Read of size 8192 at addr ffff880066b99290 by task syz-executor3/549
CPU: 3 PID: 549 Comm: syz-executor3 Not tainted 4.15.0-rc2+ #27 Hardware
name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014
Call Trace:
dump_stack+0x8d/0xd4
print_address_description+0x73/0x290
kasan_report+0x25c/0x370
? create_raw_packet_qp+0x114c/0x15e2
memcpy+0x1f/0x50
create_raw_packet_qp+0x114c/0x15e2
? create_raw_packet_qp_tis.isra.28+0x13d/0x13d
? lock_acquire+0x370/0x370
create_qp_common+0x2245/0x3b50
? destroy_qp_user.isra.47+0x100/0x100
? kasan_kmalloc+0x13d/0x170
? sched_clock_cpu+0x18/0x180
? fs_reclaim_acquire.part.15+0x5/0x30
? __lock_acquire+0xa11/0x1da0
? sched_clock_cpu+0x18/0x180
? kmem_cache_alloc_trace+0x17e/0x310
? mlx5_ib_create_qp+0x30e/0x17b0
mlx5_ib_create_qp+0x33d/0x17b0
? sched_clock_cpu+0x18/0x180
? create_qp_common+0x3b50/0x3b50
? lock_acquire+0x370/0x370
? __radix_tree_lookup+0x180/0x220
? uverbs_try_lock_object+0x68/0xc0
? rdma_lookup_get_uobject+0x114/0x240
create_qp.isra.5+0xce4/0x1e20
? ib_uverbs_ex_create_cq_cb+0xa0/0xa0
? copy_ah_attr_from_uverbs.isra.2+0xa00/0xa00
? ib_uverbs_cq_event_handler+0x160/0x160
? __might_fault+0x17c/0x1c0
ib_uverbs_create_qp+0x21b/0x2a0
? ib_uverbs_destroy_cq+0x2e0/0x2e0
ib_uverbs_write+0x55a/0xad0
? ib_uverbs_destroy_cq+0x2e0/0x2e0
? ib_uverbs_destroy_cq+0x2e0/0x2e0
? ib_uverbs_open+0x760/0x760
? futex_wake+0x147/0x410
? check_prev_add+0x1680/0x1680
? do_futex+0x3d3/0xa60
? sched_clock_cpu+0x18/0x180
__vfs_write+0xf7/0x5c0
? ib_uverbs_open+0x760/0x760
? kernel_read+0x110/0x110
? lock_acquire+0x370/0x370
? __fget+0x264/0x3b0
vfs_write+0x18a/0x460
SyS_write+0xc7/0x1a0
? SyS_read+0x1a0/0x1a0
? trace_hardirqs_on_thunk+0x1a/0x1c
entry_SYSCALL_64_fastpath+0x18/0x85
RIP: 0033:0x4477b9
RSP: 002b:00007f1822cadc18 EFLAGS: 00000292 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000005 RCX: 00000000004477b9
RDX: 0000000000000070 RSI: 000000002000a000 RDI: 0000000000000005
RBP: 0000000000708000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000292 R12: 00000000ffffffff
R13: 0000000000005d70 R14: 00000000006e6e30 R15: 0000000020010ff0
Allocated by task 549:
__kmalloc+0x15e/0x340
kvmalloc_node+0xa1/0xd0
create_user_qp.isra.46+0xd42/0x1610
create_qp_common+0x2e63/0x3b50
mlx5_ib_create_qp+0x33d/0x17b0
create_qp.isra.5+0xce4/0x1e20
ib_uverbs_create_qp+0x21b/0x2a0
ib_uverbs_write+0x55a/0xad0
__vfs_write+0xf7/0x5c0
vfs_write+0x18a/0x460
SyS_write+0xc7/0x1a0
entry_SYSCALL_64_fastpath+0x18/0x85
Freed by task 368:
kfree+0xeb/0x2f0
kernfs_fop_release+0x140/0x180
__fput+0x266/0x700
task_work_run+0x104/0x180
exit_to_usermode_loop+0xf7/0x110
syscall_return_slowpath+0x298/0x370
entry_SYSCALL_64_fastpath+0x83/0x85
The buggy address belongs to the object at ffff880066b99180 which
belongs to the cache kmalloc-512 of size 512 The buggy address is
located 272 bytes inside of 512-byte region [ffff880066b99180,
ffff880066b99380) The buggy address belongs to the page:
page:000000006040eedd count:1 mapcount:0 mapping: (null)
index:0x0 compound_mapcount: 0
flags: 0x4000000000008100(slab|head)
raw: 4000000000008100 0000000000000000 0000000000000000 0000000180190019
raw: ffffea00019a7500 0000000b0000000b ffff88006c403080 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff880066b99180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff880066b99200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff880066b99280: 00 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc
^
ffff880066b99300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff880066b99380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
Cc: syzkaller <syzkaller@googlegroups.com>
Fixes: 0fb2ed66a1 ("IB/mlx5: Add create and destroy functionality for Raw Packet QP")
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The original commit of this patch has a munged log message that is
missing several of the tags the original author intended to be on the
patch. This was due to patchworks misinterpreting a cut-n-paste
separator line as an end of message line and munging the mbox that was
used to import the patch:
https://patchwork.kernel.org/patch/10264089/
The original patch will be reapplied with a fixed commit message so the
proper tags are applied.
This reverts commit aa0de36a40.
Signed-off-by: Doug Ledford <dledford@redhat.com>
mlx5-updates-2018-02-28-1 (IPSec-1)
This series consists of some fixes and refactors for the mlx5 drivers,
especially around the FPGA and flow steering. Most of them are trivial
fixes and are the foundation of allowing IPSec acceleration from user-space.
We use flow steering abstraction in order to accelerate IPSec packets.
When a user creates a steering rule, [s]he states that we'll carry an
encrypt/decrypt flow action (using a specific configuration) for every
packet which conforms to a certain match. Since currently offloading these
packets is done via FPGA, we'll add another set of flow steering ops.
These ops will execute the required FPGA commands and then call the
standard steering ops.
In order to achieve this, we need that the commands will get all the
required information. Therefore, we pass the fte object and embed the
flow_action struct inside the fte. In addition, we add the shim layer
that will later be used for alternating between the standard and the
FPGA steering commands.
Some fixes, like " net/mlx5e: Wait for FPGA command responses with a timeout"
are very relevant for user-space applications, as these applications could
be killed, but we still want to wait for the FPGA and update the kernel's
database.
Regards,
Aviad and Matan
Signed-off-by: Doug Ledford <dledford@redhat.com>
The user can provide very large cqe_size which will cause to integer
overflow as it can be seen in the following UBSAN warning:
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add helper functions that check if a protocol is
part of a flow steering match criteria.
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
The has_tag member will indicate whether a tag action was specified
in flow specification.
A flow tag 0 = MLX5_FS_DEFAULT_FLOW_TAG is assumed a valid flow tag
that is currently used by mlx5 RDMA driver, whereas in HW flow_tag = 0
means that the user doesn't care about flow_tag. HW always provide
a flow_tag = 0 if all flow tags requested on a specific flow are 0.
So we need a way (in the driver) to differentiate between a user really
requesting flow_tag = 0 and a user who does not care, in order to be
able to report conflicting flow tags on a specific flow.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Reviewed-by: Aviad Yehezkel <aviadye@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Group and pass all function arguments of parse_flow_attr call in one
common struct mlx5_flow_act.
This patch passes all the action arguments of parse_flow_attr in one common
struct mlx5_flow_act. It allows us to scale the number of actions without adding
new arguments to the function.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Acked-by: Jason Gunthorpe <jgg@mellanox.com>
"err" is either zero or possibly uninitialized here. It should be
-EINVAL.
Fixes: 427c1e7bcd ("{IB, net}/mlx5: Move the modify QP operation table to mlx5_ib")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The series that introduced dual port RoCE mode assumed that we don't have
a dual port HCA that use the mlx5 driver, this is not the case for
Connect-IB HCAs. This reasoning led to assigning 1 as the native port
index which causes issue when the second port is used.
For example query_pkey() when called on the second port will return values
of the first port. Make sure that we assign the right port index as the
native port index.
Fixes: 32f69e4be2 ("{net, IB}/mlx5: Manage port association for multiport RoCE")
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Perform QP type check in one place and fail as early as possible.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
IB spec says that a lid should be ignored when link layer is Ethernet,
for example when building or parsing a CM request message (CA17-34).
However, since ib_lid_be16() and ib_lid_cpu16() validates the slid,
not only when link layer is IB, we set the slid to zero to prevent
false warnings in the kernel log.
Fixes: 62ede77799 ("Add OPA extended LID support")
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
All other mlx5_events report the port number as 1 based, which is how FW
reports it in the port event EQE. Reporting 0 for this event causes
mlx5_ib to not raise a fatal event notification to registered clients
due to a seemingly invalid port.
All switch cases in mlx5_ib_event that go through the port check are
supposed to set the port now, so just do it once at variable
declaration.
Fixes: 89d44f0a6c73("net/mlx5_core: Add pci error handlers to mlx5_core driver")
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
During QP creation, the mlx5 driver translates the QP type to an
internal value which is passed on to FW. There was no check to make
sure that the translated value is valid, and -EINVAL was coerced into
the mailbox command.
Current firmware refuses this as an invalid QP type, but future/past
firmware may do something else.
Fixes: 09a7d9eca1 ('{net,IB}/mlx5: QP/XRCD commands via mlx5 ifc')
Reviewed-by: Ilya Lesokhin <ilyal@mellanox.com>
Signed-off-by: Noa Osherovich <noaos@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When in switchdev mode, there is no need to do self loopback checks
as we can't receive those packets, we insert steering rules to the
eswitch that make sure packets can't be looped back.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
This commit adds full support for IB representor:
1) Representors profile, We add two new profiles:
nic_rep_profile - This profile will be used to create an IB device that
represents the PF/UPLINK.
rep_profile - This profile will be used to create an IB device that
represents VFs. Each VF will be its own representor.
2) Proper load/unload callbacks, Those are called by the E-Switch when
moving to/from switchdev mode.
3) Different flow DB handling for when we in switchdev mode.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
In order to forward traffic from representor's SQ to the right virtual
function, every time an SQ is created also add the corresponding flow rule
to the FDB.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
When enabling many VFs and switching to switchdev mode, the total amount
of mkeys we try to allocate when loading representors is very large and
may cause timeouts on allocations, the same issues was observed on VFs
and we employ the same fix that was done for them. We avoid allocating
the full MR cache on load but still allow it to be manipulated once the
IB device is loaded.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Currently in switchdev mode we allow only for raw packet QPs.
Expose the right capabilities and set the gid table length to 0, also
make sure we don't try to enable RoCE, so split the function
to enable RoCE so representors can enable only the notifier needed for
net device events.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Currently we listen to netdev register/unregister event based on PCI
device. When in switchdev mode PF and representors share the same PCI
device, so in order to pair ib device and netdev in switchdev mode
compare the netdev that triggered the event to that of the representor.
Expose a function that lets you receive the netdev associated what
a given representor.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
When we point to a representor, it means we are in switchdev mode.
The flow db is shared between PF and virtual function representors
so each rule created needs to have a match on its specific source port.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
A flow DB is a shared resource between PF and representors,
need to allocate it only when creating the PF IB device.
Once we add IB representors, they will use the flow db which was
created by the PF.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Create the basic infrastructure of registering and unregistering
IB representors. The load/unload callbacks are left empty and
proper implementation will be introduced in following patches.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
The current implementation of create CQ requires contiguous
memory, such requirement is problematic once the memory is
fragmented or the system is low in memory, it causes for
failures in dma_zalloc_coherent().
This patch implements new scheme of fragmented CQ to overcome
this issue by introducing new type: 'struct mlx5_frag_buf_ctrl'
to allocate fragmented buffers, rather than contiguous ones.
Base the Completion Queues (CQs) on this new fragmented buffer.
It fixes following crashes:
kworker/29:0: page allocation failure: order:6, mode:0x80d0
CPU: 29 PID: 8374 Comm: kworker/29:0 Tainted: G OE 3.10.0
Workqueue: ib_cm cm_work_handler [ib_cm]
Call Trace:
[<>] dump_stack+0x19/0x1b
[<>] warn_alloc_failed+0x110/0x180
[<>] __alloc_pages_slowpath+0x6b7/0x725
[<>] __alloc_pages_nodemask+0x405/0x420
[<>] dma_generic_alloc_coherent+0x8f/0x140
[<>] x86_swiotlb_alloc_coherent+0x21/0x50
[<>] mlx5_dma_zalloc_coherent_node+0xad/0x110 [mlx5_core]
[<>] ? mlx5_db_alloc_node+0x69/0x1b0 [mlx5_core]
[<>] mlx5_buf_alloc_node+0x3e/0xa0 [mlx5_core]
[<>] mlx5_buf_alloc+0x14/0x20 [mlx5_core]
[<>] create_cq_kernel+0x90/0x1f0 [mlx5_ib]
[<>] mlx5_ib_create_cq+0x3b0/0x4e0 [mlx5_ib]
Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJabj6pAAoJEHm+PkMAQRiGs8cIAJQFkCWnbz86e3vG4DuWhyA8
CMGHCQdUOxxFGa/ixhIiuetbC0x+JVHAjV2FwVYbAQfaZB3pfw2iR1ncQxpAP1AI
oLU9vBEqTmwKMPc9CM5rRfnLFWpGcGwUNzgPdxD5yYqGDtcM8K840mF6NdkYe5AN
xU8rv1wlcFPF4A5pvHCH0pvVmK4VxlVFk/2H67TFdxBs4PyJOnSBnf+bcGWgsKO6
hC8XIVtcKCH2GfFxt5d0Vgc5QXJEpX1zn2mtCa1MwYRjN2plgYfD84ha0xE7J0B0
oqV/wnjKXDsmrgVpncr3txd4+zKJFNkdNRE4eLAIupHo2XHTG4HvDJ5dBY2NhGU=
=sOml
-----END PGP SIGNATURE-----
Merge tag v4.15 of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
To resolve conflicts in:
drivers/infiniband/hw/mlx5/main.c
drivers/infiniband/hw/mlx5/qp.c
From patches merged into the -rc cycle. The conflict resolution matches
what linux-next has been carrying.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The flags field the enum is used with comes directly from the uapi
so it belongs in the uapi headers for clarity and so userspace can
use it.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Failure in XRCD FW deallocation command leaves memory leaked and
returns error to the user which he can't do anything about it.
This patch changes behavior to always free memory and always return
success to the user.
Fixes: e126ba97db ("mlx5: Add driver for Mellanox Connect-IB adapters")
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The kmalloc() failure to allocate memory generates enough information
and doesn't need to be accompanied by another driver print.
Fixes: d69a24e036 ("IB/mlx5: Move IB event processing onto a workqueue")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch maps the new page to user space applications to
allow converting a user space completion timestamp to system wall
time at the lowest possible latency cost.
By using a versioning scheme we allow compatibility between current
and future userspace libraries.
The change moves mlx5_ib_mmap_cmd enum from mlx5_ib.h to the
abi header file mlx5-abi.h.
Reviewed-by: Alex Vesker <valex@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Feras Daoud <ferasda@mellanox.com>
Signed-off-by: Eitan Rabin <rabin@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
- Oops fix in hfi1 driver
- Use-after-free issue in iser-target
- Use of user supplied array index without proper checking
-----BEGIN PGP SIGNATURE-----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=MHNK
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Doug Ledford:
"We had a few more items creep up over the last week. Given we are in
-rc8, these are obviously limited to bugs that have a big downside and
for which we are certain of the fix.
The first is a straight up oops bug that all you have to do is read
the code to see it's a guaranteed 100% oops bug.
The second is a use-after-free issue. We get away lucky if the queue
we are shutting down is empty, but if it isn't, we can end up oopsing.
We really need to drain the queue before destroying it.
The final one is an issue with bad user input causing us to access our
port array out of bounds. While fixing the array out of bounds issue,
it was noticed that the original code did the same thing twice (the
call to rdma_ah_set_port_num()), so its removal is not balanced by a
readd elsewhere, it was already where it needed to be in addition to
where it didn't need to be.
Summary:
- Oops fix in hfi1 driver
- use-after-free issue in iser-target
- use of user supplied array index without proper checking"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/mlx5: Fix out-of-bound access while querying AH
IB/hfi1: Prevent a NULL dereference
iser-target: Fix possible use-after-free in connection establishment error
The rdma_ah_find_type() accesses the port array based on an index
controlled by userspace. The existing bounds check is after the first use
of the index, so userspace can generate an out of bounds access, as shown
by the KASN report below.
==================================================================
BUG: KASAN: slab-out-of-bounds in to_rdma_ah_attr+0xa8/0x3b0
Read of size 4 at addr ffff880019ae2268 by task ibv_rc_pingpong/409
CPU: 0 PID: 409 Comm: ibv_rc_pingpong Not tainted 4.15.0-rc2-00031-gb60a3faf5b83-dirty #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014
Call Trace:
dump_stack+0xe9/0x18f
print_address_description+0xa2/0x350
kasan_report+0x3a5/0x400
to_rdma_ah_attr+0xa8/0x3b0
mlx5_ib_query_qp+0xd35/0x1330
ib_query_qp+0x8a/0xb0
ib_uverbs_query_qp+0x237/0x7f0
ib_uverbs_write+0x617/0xd80
__vfs_write+0xf7/0x500
vfs_write+0x149/0x310
SyS_write+0xca/0x190
entry_SYSCALL_64_fastpath+0x18/0x85
RIP: 0033:0x7fe9c7a275a0
RSP: 002b:00007ffee5498738 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 00007fe9c7ce4b00 RCX: 00007fe9c7a275a0
RDX: 0000000000000018 RSI: 00007ffee5498800 RDI: 0000000000000003
RBP: 000055d0c8d3f010 R08: 00007ffee5498800 R09: 0000000000000018
R10: 00000000000000ba R11: 0000000000000246 R12: 0000000000008000
R13: 0000000000004fb0 R14: 000055d0c8d3f050 R15: 00007ffee5498560
Allocated by task 1:
__kmalloc+0x3f9/0x430
alloc_mad_private+0x25/0x50
ib_mad_post_receive_mads+0x204/0xa60
ib_mad_init_device+0xa59/0x1020
ib_register_device+0x83a/0xbc0
mlx5_ib_add+0x50e/0x5c0
mlx5_add_device+0x142/0x410
mlx5_register_interface+0x18f/0x210
mlx5_ib_init+0x56/0x63
do_one_initcall+0x15b/0x270
kernel_init_freeable+0x2d8/0x3d0
kernel_init+0x14/0x190
ret_from_fork+0x24/0x30
Freed by task 0:
(stack is not available)
The buggy address belongs to the object at ffff880019ae2000
which belongs to the cache kmalloc-512 of size 512
The buggy address is located 104 bytes to the right of
512-byte region [ffff880019ae2000, ffff880019ae2200)
The buggy address belongs to the page:
page:000000005d674e18 count:1 mapcount:0 mapping: (null) index:0x0 compound_mapcount: 0
flags: 0x4000000000008100(slab|head)
raw: 4000000000008100 0000000000000000 0000000000000000 00000001000c000c
raw: dead000000000100 dead000000000200 ffff88001a402000 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff880019ae2100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff880019ae2180: 00 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc
>ffff880019ae2200: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
^
ffff880019ae2280: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff880019ae2300: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
==================================================================
Disabling lock debugging due to kernel taint
Cc: <stable@vger.kernel.org>
Fixes: 44c58487d5 ("IB/core: Define 'ib' and 'roce' rdma_ah_attr types")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Change mlx5_get_uars_page to return ERR_PTR in case of
allocation failure. Change all callers accordingly to
check the IS_ERR(ptr) instead of NULL.
Fixes: 59211bd3b6 ("net/mlx5: Split the load/unload flow into hardware and software flows")
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
There are systems platform information management interfaces (such as
HOST2BMC) for which we cannot disable local loopback multicast traffic.
Separate disable_local_lb_mc and disable_local_lb_uc capability bits so
driver will not disable multicast loopback traffic if not supported.
(It is expected that Firmware will not set disable_local_lb_mc if
HOST2BMC is running for example.)
Function mlx5_nic_vport_update_local_lb will do best effort to
disable/enable UC/MC loopback traffic and return success only in case it
succeeded to changed all allowed by Firmware.
Adapt mlx5_ib and mlx5e to support the new cap bits.
Fixes: 2c43c5a036 ("net/mlx5e: Enable local loopback in loopback selftest")
Fixes: c85023e153 ("IB/mlx5: Add raw ethernet local loopback support")
Fixes: bded747bb4 ("net/mlx5: Add raw ethernet local loopback firmware command")
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Cc: kernel-team@fb.com
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
The initial assignment to mdev is redundant as mdev is re-assigned
later and the first assigned value is never read. Remove this
redundant assignment.
Cleans up clang warning:
drivers/infiniband/hw/mlx5/main.c:359:24: warning: Value stored
to 'mdev' during its initialization is never read
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When operating in dual port RoCE mode FW doesn't support steering for
raw QPs on the slave port. They still work on the master port, but
the user has no way of knowing which port is the master. The
capability is reported per device, not per port.
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Route performance query MADs to the correct mlx5_core_dev when using
dual port RoCE mode.
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When in dual port mode setting a RoCE GID for any port flows through the
master ports mlx5_core_dev. Provide an interface to set the port when
sending this command.
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Update the counter interface for multiple ports. Some counter sets
always comes from the primary device.
Port specific counters should be accessed per mlx5_core_dev not always
through the IB master mdev.
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When there are multiple ports for single IB(RoCE) device, support
debugfs entries to be available for each port.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Port operations must be routed to their native mlx5_core_dev. A
multiport RoCE device registers itself as having 2 ports even before a
2nd port is affiliated. If an unaffilated port is queried use capability
information from the master port, these values are the same.
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Because mlx5_ib_event can be called from atomic context move event
handling onto a workqueue. A mutex lock is required to get the IB device
for slave ports, so move event processing onto a work queue. When an IB
event is received, check if the mlx5_core_dev is a slave port, if so
attempt to get the IB device it's affiliated with. If found process the
event for that device, otherwise return.
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When mlx5_ib_add is called determine if the mlx5 core device being
added is capable of dual port RoCE operation. If it is, determine
whether it is a master device or a slave device using the
num_vhca_ports and affiliate_nic_vport_criteria capabilities.
If the device is a slave, attempt to find a master device to affiliate it
with. Devices that can be affiliated will share a system image guid. If
none are found place it on a list of unaffiliated ports. If a master is
found bind the port to it by configuring the port affiliation in the NIC
vport context.
Similarly when mlx5_ib_remove is called determine the port type. If it's
a slave port, unaffiliate it from the master device, otherwise just
remove it from the unaffiliated port list.
The IB device is registered as a multiport device, even if a 2nd port is
not available for affiliation. When the 2nd port is affiliated later the
GID cache must be refreshed in order to get the default GIDs for the 2nd
port in the cache. Export roce_rescan_device to provide a mechanism to
refresh the cache after a new port is bound.
In a multiport configuration all IB object (QP, MR, PD, etc) related
commands should flow through the master mlx5_core_dev, other commands
must be sent to the slave port mlx5_core_mdev, an interface is provide
to get the correct mdev for non IB object commands.
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When multiple RoCE ports are supported registration for events on
multiple netdevs is required. Refactor the event registration and
handling to support multiple ports.
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Remove use of the num_ports general capability throughout. The number of
ports will be variable in the future, and reported in a different way.
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
A DC Target (DCT) QP is represented in the hardware as a unique object.
This object is created by CREATE_DCT command and destroyed by DESTROY_DCT
command. However, in the driver we describe it as a QP.
The hardware command that creates a DCT needs parameters that the verb
create_qp() does not provide. Those remaining parameters are provided
with the call to the verb modify_qp(). Therefore we delay the actual
creation of a DCT in the hardware until the stage of modify_qp() to RTR.
A support for query_qp() was added as well. It uses QUERY_DCT command to
retrieve the applicable fields.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
DC Initiator (DCI) QP is represented like any other QP in the hardware.
However, like any other transport QP there are attributes and settings
that are special to DCI QP and needs specific attention and care.
Make necessary changes to configure DCI QP.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The QP type IB_QPT_DRIVER doesn't describe the transport or the service
that the QP provides but those are known only to the hardware driver.
The actual type of the QP is stored in the hardware driver context (i.e.
mlx5_qp) under the field qp_sub_type.
Take the real QP type and any extra data that is required to create the QP
from the driver channel and modify the QP initial attributes before continuing
with create_qp().
Downstream patches from this series will add support for both DCI and
DCT driver QPs.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Unconditional locks/list and ODP srcu initialization should be done in
the INIT stage. Remove those from the CAPS stage and move them to the
proper stage.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The loopback stage only initializes a lock, move it to be in
the CAPS initialization phase and get rid loopback step completely.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Now that we have a stage just for hardware counters, move all relevant
initialization logic into one place.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Now that we have a stage just for ODP, move all relevant
initialization logic into one place.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Now that we have a stage just for RoCE/ETH, move all relevant
initialization logic into one place.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Today we have single function which is used when we add an IB interface,
break this function into multiple functions.
Create stages and a generic mechanism to execute each stage.
This is in preparation for RDMA/IB representors which might not need
all stages or will do things differently in some of the stages.
This patch doesn't change any functionality.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch enables QP creation with a given BF index, this allows the
user space driver to share same BF between few QPs or alternatively have
a dedicated BF per QP.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch exposes the option to dynamic allocates a UAR, this
functionality will be used in downstream patch in this series as
part of QP creation.
Specifically, the user space driver asks for a UAR allocation in a given
page index, upon success this UAR and its bfregs can be used as part of
QP creation by the user space driver.
To enable allocating more than 256 UARs the page index is encoded in an
extra one byte just after the command byte.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch extends the alloc context flow to be prepared for working
with dynamic UAR allocations.
Currently upon alloc context there is some fix size of UARs that are
allocated (named 'static allocation') and there is no option to user
application to ask for more or control which UAR will be used by which
QP.
In this patch the driver prepares its data structures to manage both the
static and the dynamic allocations and let the user driver knows about
the max value of dynamic blue-flame registers that are allowed.
Downstream patches from this series will enable the dynamic allocation
and the association as part of QP creation.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add missing inner RSS support capability as part of
the RSS supported fields.
In addition change MLX5_RX_HASH_INNER to 1UL << 31 in
order to define it as unsigned.
Fixes: 309fa3470f ("IB/mlx5: Add support for RSS on the inner packet")
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Patches for 4.16 that are dependent on patches sent to 4.15-rc.
These are small clean ups for the vmw_pvrdma and i40iw drivers.
* 'from-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma.git:
RDMA/vmw_pvrdma: Remove usage of BIT() from UAPI header
RDMA/vmw_pvrdma: Use refcount_t instead of atomic_t
RDMA/vmw_pvrdma: Use more specific sizeof in kcalloc
RDMA/vmw_pvrdma: Clarify QP and CQ is_kernel logic
RDMA/vmw_pvrdma: Add UAR SRQ macros in ABI header file
i40iw: Change accelerated flag to bool
ibmr.device is being set only after ib_alloc_mr() is
(successfully) complete. Therefore, in case mlx5_core_create_mkey()
return with error, the error flow calls mlx5_free_priv_descs()
which uses ibmr.device (which doesn't exist yet), causing
a NULL dereference oops.
To fix this, the IB device should be set in the mr struct earlier
stage (e.g. prior to calling mlx5_core_create_mkey()).
Fixes: 8a187ee52b ("IB/mlx5: Support the new memory registration API")
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Nitzan Carmi <nitzanc@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
User-space applications can do mmap and munmap directly at
any time.
Since the VMA list is not protected with a mutex, concurrent
accesses to the VMA list from the mmap and munmap can cause
data corruption. Add a mutex around the list.
Cc: <stable@vger.kernel.org> # v4.7
Fixes: 7c2344c3bb ("IB/mlx5: Implements disassociate_ucontext API")
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
These duplicate includes have been found with scripts/checkincludes.pl but
they have been removed manually to avoid removing false positives.
Signed-off-by: Pravin Shedge <pravin.shedge4linux@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Congestion counters are counted and queried per physical function.
When working in LAG mode, CNP packets can be sent or received on both
of the functions, thus congestion counters should be aggregated from
the two physical functions.
Fixes: e1f24a79f4 ("IB/mlx5: Support congestion related counters")
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Reviewed-by: Aviv Heller <avivh@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
A warning that I thought I had fixed before occasionally comes
back in rare randconfig builds (I found 7 instances in the last
100000 builds, originally it was much more frequent):
drivers/infiniband/hw/mlx5/mr.c: In function 'mlx5_ib_reg_user_mr':
drivers/infiniband/hw/mlx5/mr.c:1229:5: error: 'order' may be used uninitialized in this function [-Werror=maybe-uninitialized]
if (order <= mr_cache_max_order(dev)) {
^
drivers/infiniband/hw/mlx5/mr.c:1247:8: error: 'ncont' may be used uninitialized in this function [-Werror=maybe-uninitialized]
drivers/infiniband/hw/mlx5/mr.c:1247:8: error: 'page_shift' may be used uninitialized in this function [-Werror=maybe-uninitialized]
drivers/infiniband/hw/mlx5/mr.c:1260:2: error: 'npages' may be used uninitialized in this function [-Werror=maybe-uninitialized]
I've looked at all those findings again and noticed that they are all
with CONFIG_INFINIBAND_USER_MEM=n, which means ib_umem_get() returns
an error unconditionally and we never initialize or use those variables.
This triggers a condition in gcc iff mr_umem_get() is partially but not
entirely inlined, which in turn depends on the exact combination of
optimization settings. This is a known problem with gcc, with no
easy solution in the compiler, so this adds another workaround that
should be more reliable than my previous attempt.
Returning an error from mlx5_ib_reg_user_mr() earlier means that we
can completely bypass the logic that caused the warning, the compiler
can now see that the variable is never accessed.
Fixes: 14ab8896f5 ("IB/mlx5: avoid bogus -Wmaybe-uninitialized warning")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
query_device can now obtain the maximum values for
cq_max_count and cq_period, needed for cq moderation.
Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Exposed mlx5_ib_modify_cq to be called from ib device
verb list.
Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When working over a RoCE network, the UDP source port should be set only
for statically connected QPs (RC, UC and XRC).
Fixes: 2811ba51b0 ("IB/mlx5: Add RoCE fields to Address Vector")
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The UMR's QP is created by calling mlx5_ib_create_qp directly, and
therefore the send CQ and the recv CQ on the ibqp weren't assigned.
Assign them right after calling the mlx5_ib_create_qp to assure
that any access to those pointers will work as expected and won't
crash the system as might happen as part of reset flow.
Fixes: e126ba97db ("mlx5: Add driver for Mellanox Connect-IB adapters")
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add the PCI write end padding flag to device_cap_flags enum and set it
during mlx5_ib_query_device so it will be reported to user-space.
During WQ/QP creation, set that capability for WQ/QP if user requested
it and HW supports it.
PCI write end padding modification is not supported for now. There's no
such flag for a QP but for a WQ, create and modify use the same flag.
Return an error if PCI write end padding flag is set during modify_wq.
Signed-off-by: Noa Osherovich <noaos@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Some user space application would like to do RSS on the inner
packet fields instead on the outer.
When MLX5_RX_HASH_INNER is set with one or more of the other
hash fields, then the RSS will be done using the inner packet.
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The device can support receive Stateless Offloads for the inner
packet's fields only when the packet is processed by TIR which is
enabled to support tunneling. Otherwise, the device treats the
packet as an ordinary non-tunneling packet and receive offloads
can be done only for the outer packet's field.
In order to enable receive Stateless Offloading support for incoming
tunneling traffic the TIR should be created with tunneled_offload_en.
Tunneling offloads is supported only be raw ethernet QP.
This patch includes:
* New QP creation flag for tunneling offloads.
* Reports device capabilities.
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In some benchmarks and some CPU architectures, writing the CQE on a full
cache line size improves performance by saving memory access operations
(read-modify-write) relative to partial cache line change. This patch
lets the user to configure the device to pad the CQE up to 128B in case
its content is less than 128B. Currently the driver supports only padding
for a CQE size of 128B.
Signed-off-by: Guy Levi <guyle@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In commit 1cbe6fc86c ("IB/mlx5: Add support for CQE compressing") the
concept of CQE compression was introduced and added a support for 64B
CQE size. This change update the code to support 128B CQE size as well.
Signed-off-by: Guy Levi <guyle@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Allow creation of a multi-packet receive queue.
In order to create a multi-packet RQ, the following fields in
the mlx5_ib_rwq should be set:
- log_num_strides: Log of number of strides per WQE
- single_stride_log_num_of_bytes: Log of a single stride size
- two_byte_shift_en: When enabled, hardware pads 2 bytes of zeros
before writing the message to memory (e.g. for the IP alignment).
Signed-off-by: Noa Osherovich <noaos@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch reports the device's striding RQ capabilities to
the user-space:
- min/max_single_stride_log_num_of_bytes: Log of min/max number of
bytes in a single stride.
- min/max_single_wqe_log_num_of_strides: Log of min/max number of
strides in a single WQE.
- supported_qpts: A bit mask to know which QP types support multi-
packet RQ, for now only Raw Packet QPs.
Signed-off-by: Noa Osherovich <noaos@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The early for-next branch was based on v4.14-rc2, while the shared pull
request I got from Mellanox used a v4.14-rc4 base. I'm making the
branch that was the shared Mellanox pull request the new for-next branch
and merging the early for-next branch into it.
Signed-off-by: Doug Ledford <dledford@redhat.com>
Using the ARRAY_SIZE macro improves the readability of the code.
Found with Coccinelle with the following semantic patch:
@r depends on (org || report)@
type T;
T[] E;
position p;
@@
(
(sizeof(E)@p /sizeof(*E))
|
(sizeof(E)@p /sizeof(E[...]))
|
(sizeof(E)@p /sizeof(T))
)
Signed-off-by: Jérémy Lefaure <jeremy.lefaure@lse.epita.fr>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Since IB/core resolves the destination mac address for user and kernel
consumers, avoid resolving in multiple provider drivers.
Only ib_core resolves DMAC now, therefore resolve_eth_dmac is removed as
exported symbol.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
References: commit 5fe9dec0d0 ("IB/mlx5: Use blue flame register allocator in mlx5_ib")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Avoid that gcc 7 reports the following warning when building with W=1:
warning: this statement may fall through [-Wimplicit-fallthrough=]
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When UAR get_page fails, it needs to continue to cleanup debugfs for
congestion control parameters. Labels for error path were incorrectly
ordered.
This patch fixes to do correct cleanup on debugfs init failure and uar
get page failure.
Fixes: 4a2da0b8c0 ("IB/mlx5: Add debug control parameters for congestion control")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
pr_err() and mlx5_ib_dbg( messages should terminated with a new-line to
avoid other messages being concatenated.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
mlx5_ib_reg_user_mr called mlx5_ib_dereg_mr in case of MR population
failure. This resulted in a NULL dereference as ibmr->device wasn't
initialized yet.
We address this by adding an internal dereg_mr function that can handle
partially initialized MRs, and fixing clean_mr to work on partially
initialized MRs.
Fixes: ff740aefec ("IB/mlx5: Decouple MR allocation and population flows")
Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The patch simplifies mlx5_ib_cont_pages and fixes the following
issues in the original implementation:
First issues is related to alignment of the PFNs. After the check
base + p != PFN, the alignment of the PFN wasn't checked. So the PFN
sequence 0, 1, 1, 2 would result in a page_shift of 13 even though
the 3rd PFN is not 8KB aligned.
This wasn't actually a bug because it was supported by all the
existing mlx5 compatible device, but we don't want to require
this support in all future devices.
Another issue is because the inner loop didn't advance PFN so
the test "if (base + p != pfn)" always failed for SGE with
len > (1<<page_shift).
Fixes: e126ba97db ("mlx5: Add driver for Mellanox Connect-IB adapters")
Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com>
Reviewed-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The tag matching functionality is implemented by mlx5 driver
by extending XRQ, however this internal kernel information was
exposed to user space applications with *xrq* name instead of *tm*.
This patch renames *xrq* to *tm* to handle that.
Fixes: 8d50505ada ("IB/uverbs: Expose XRQ capabilities")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
If delay_drop_debugfs_init() fails in any of the operations to create
debugfs, it is calling delay_drop_debugfs_cleanup() as part of its
cleanup. But delay_drop_debugfs_cleanup() checks for 'dbg' and since
we have not yet pointed 'dbg' to the debugfs we need to cleanup, the
cleanup fails and we are left with stray debugfs elements and also a
memory leak.
Fixes: 4a5fd5d296 ("IB/mlx5: Add necessary delay drop assignment")
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Pass to mlx5_core flag to enable rendezvous offload, list_size and CQ
when SRQ created with IB_SRQT_TM.
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Reviewed-by: Yossi Itigin <yosefe@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Before this change CQ attached to SRQ was part of XRC specific extension.
Moving CQ handle out makes it available to other types extending SRQ
functionality.
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Reviewed-by: Yossi Itigin <yosefe@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Expose enhanced multi packet WQE capability to user space through
query_device by uhw.
Signed-off-by: Bodong Wang <bodong@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Set the field to allow posting multi packet send WQEs if hardware
supports this feature. This doesn't mean the send WQEs will be for
multi packet unless the send WQE was prepared according to multi
packet send WQE format.
User space shall use flag MLX5_IB_ALLOW_MPW to check if hardware
supports MPW and allows MPW in SQ context.
Signed-off-by: Bodong Wang <bodong@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
