Add module to support ALSA pcm stream configurations for ACP I2S
and DMIC endpoints
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20211117093734.17407-7-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add dsp ops callback to register I2S and DMIC sof dai's with ALSA
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20211117093734.17407-6-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add IPC module for generic ACP block and exposed ops callback for
to synchronize SOF IPC message between host and DSP
Signed-off-by: Balakishore Pati <Balakishore.pati@amd.com>
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20211117093734.17407-5-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add acp-loader module with ops callback to load and run firmware
on ACP DSP block on Renoir platform.
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20211117093734.17407-4-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ACP DMA is used for loading SOF firmware into DSP memory and data
transfer from system memory to DSP memory. Add helper callbacks to
initialize and configure ACP DMA block for fw loading.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20211117093734.17407-3-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch initializes ACP HW block to support SOF on
AMD Renoir platform.
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20211117093734.17407-2-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Follow the Intel example and simplify the Kconfig
a) start from the end-product for 'select' chains
b) use 'depends on' to filter out configurations.
c) use snd-sof-of as a common module without any 'select'
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20211116124131.46414-1-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently same slim channel map setup for every dai link, which is redundant.
Fix this by adding a flag and conditionally setting these channel maps.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20211116115021.14213-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Update MBHC driver to support special headset such as apple
and huwawei headsets.
Signed-off-by: Srinivasa Rao Mandadapu <srivasam@codeaurora.org>
Co-developed-by: Venkata Prasad Potturu <potturu@codeaurora.org>
Signed-off-by: Venkata Prasad Potturu <potturu@codeaurora.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/1636960288-27537-1-git-send-email-srivasam@codeaurora.org
Signed-off-by: Mark Brown <broonie@kernel.org>
To ensure clean unload of the machine driver, components and topology, do
the unregister before we free IPC and debugfs.
It is a possibility that part of the unregister we would have IPC
communication with the firmware.
Suggested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20211102094756.9317-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Considering the current transition of the GPIO subsystem, remove all
dependencies of the legacy GPIO interface (linux/gpio.h and linux
/of_gpio.h) and replace it with the descriptor-based GPIO approach.
Signed-off-by: Maíra Canal <maira.canal@usp.br>
Link: https://lore.kernel.org/r/YXWo/9o7ye9a11aR@fedora
Signed-off-by: Mark Brown <broonie@kernel.org>
This adds an ALSA control so that the slow-start audio ramp feature
can be disabled. This is useful for high-definition audio applications.
The register field is unusual in that it is a 3-bit field with only
two valid values, 000=off and 111=on.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20211101101006.13092-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The machine driver is a generic machine driver for SOF with nau8825
codec w or w/o speaker additionally. Depending on the SOC
HDMI, DMIC, Bluetooth offload support are added dynamically.
Only add information related to SOF since the machine driver was
only tested with SOF.
There are currently 4 i2s machine variants of ADL.
This supports the headphone NUA8825(SSP0) alone or with smart or dumb
speakers.
Board 2,3,4 use SSP2 for Bluetooth offload support except board 1.
Board 1 : NAU8825 + RT1019P(SSP2)
Board 2 : NAU8825 + MAX98373(SSP1)
Board 3 : NAU8825 + MAX98360A(SSP1)
Board 4 : NAU8825
Signed-off-by: David Lin <CTLIN0@nuvoton.com>
Co-developed-by: Mac Chiang <mac.chiang@intel.com>
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211109133808.8729-1-mac.chiang@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
'hphpa_on' is know to be false, so this is just dead code that should be
removed.
Suggested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/57a89cc31eb2312addd3c77896d7df8206aef138.1635967035.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
This series provides a way to use constant dailink numbers for different
devices. So that we don't need to renumber them in topologies.
Some patches with different purpose are sent together in this series
since they are dependent.
Bard Liao (8):
ASoC: intel: sof_sdw: return the original error number
ASoC: intel: sof_sdw: rename be_index/link_id to link_index
ASoC: intel: sof_sdw: Use a fixed DAI link id for AMP
ASoC: intel: sof_sdw: move DMIC link id overwrite to
create_sdw_dailink
ASoC: intel: sof_sdw: remove SOF_RT715_DAI_ID_FIX quirk
ASoC: intel: sof_sdw: remove sof_sdw_mic_codec_mockup_init
ASoC: intel: sof_sdw: remove get_next_be_id
ASoC: intel: sof_sdw: add link adr order check
Pierre-Louis Bossart (2):
ASoC: Intel: sof_sdw: fix jack detection on HP Spectre x360
convertible
ASoC: Intel: sof_sdw: add SKU for Dell Latitude 9520
sound/soc/intel/boards/sof_sdw.c | 152 ++++++++++----------
sound/soc/intel/boards/sof_sdw_common.h | 7 +-
sound/soc/intel/boards/sof_sdw_rt715.c | 7 -
sound/soc/intel/boards/sof_sdw_rt715_sdca.c | 7 -
4 files changed, 85 insertions(+), 88 deletions(-)
--
2.17.1
This is the continuation of a previous series [1] where
- patch 1/4 is removed in favor of using pin switch
This will be posted independently of tfa989x support,
since it mainly require changes to sound/soc/qcom/common.c
and device DTS.
- patch 2/4 is already merged
so here are reworked patch 3/4 (bindings fixed and example added)
and patch 4/4 unchanged.
[1] https://patchwork.kernel.org/project/alsa-devel/cover/20211024085840.1536438-1-vincent.knecht@mailoo.org/
Vincent Knecht (2):
ASoC: dt-bindings: nxp, tfa989x: Add rcv-gpios property for tfa9897
ASoC: codecs: tfa989x: Add support for tfa9897 optional rcv-gpios
.../bindings/sound/nxp,tfa989x.yaml | 41 +++++++++++++++++++
sound/soc/codecs/tfa989x.c | 20 ++++++++-
2 files changed, 60 insertions(+), 1 deletion(-)
--
2.31.1
We assume the adr order described in a snd_soc_acpi_link_adr array is
jack -> amp -> mic. We follow the same order to implement the topology.
We will need a special topology if we configure a snd_soc_acpi_link_adr
array with different order. Adding a check and a warning message can
remind people to keep the order when adding a new snd_soc_acpi_link_adr
array.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20211027021824.24776-11-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
DAI link id will not be set from sdw codec init feedback function,
and be_id is changed by create_sdw_dailink() now. So we don't need
get_next_be_id() anymore.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20211027021824.24776-10-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We can apply the fixed dai link id for DMICs in create_sdw_dailink().
No need to set it in each DMIC's callback.
The fixed dai link id is not only for rt715 and rt715-sdca, but for all
DMICs, therefore we remove the SOF_RT715_DAI_ID_FIX check as well.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20211027021824.24776-7-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently, we assign SoundWire DAI link id according to the order in
the link address table, with the assumption that the headset codec is
listed first, then amplifiers and last capture devices. If the headset
codec is not present in a platform, the dai link for amplifiers will be
shifted, which can be handled in two ways
a) modify the topology to renumber the dailink changes
b) keep the dailink numbers constant in topology but also avoid the
variations in the machine driver.
This patch adds support for option b), the dailink index for amplifiers
and capture devices becomes fixed.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20211027021824.24776-6-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The link_id variable in sof_card_dai_links_create() and be_index argument
in create_sdw_dailink() is actually links' index. Rename them to link_index
to be consistent.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20211027021824.24776-5-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Tests on device show the JD2 mode does not work at all, the 'Headphone
Jack' and 'Headset Mic Jack' are shown as 'on' always.
JD1 seems to be the better option, with at least a change between the
two cases.
Jack not plugged-in:
[root@fedora ~]# amixer -Dhw:0 cget numid=12
numid=12,iface=CARD,name='Headphone Jack'
; type=BOOLEAN,access=r-------,values=1
: values=off
[root@fedora ~]# amixer -Dhw:0 cget numid=13
numid=13,iface=CARD,name='Headset Mic Jack'
; type=BOOLEAN,access=r-------,values=1
: values=off
Jack plugged-in:
[root@fedora ~]# amixer -Dhw:0 cget numid=13
numid=13,iface=CARD,name='Headset Mic Jack'
; type=BOOLEAN,access=r-------,values=1
: values=on
[root@fedora ~]# amixer -Dhw:0 cget numid=13
numid=13,iface=CARD,name='Headset Mic Jack'
; type=BOOLEAN,access=r-------,values=1
: values=on
The 'Headset Mic Jack' is updated with a delay which seems normal with
additional calibration needed.
Fixes: d92e279dee ('ASoC: Intel: sof_sdw: add quirk for HP Spectre x360 convertible')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20211027021824.24776-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We don't want to convert create_sdw_dailink()'s return value to -ENOMEM.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20211027021824.24776-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Send the DMA_TRACE_FREE IPC during release to stop and free the trace
DMA in the DSP.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20211102101019.14037-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Parse all the trace DMA IPC commands in ipc_log_header().
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20211102101019.14037-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some OEM use a GPIO in addition to the tfa9897 RCV bit to
switch between loudspeaker and earpiece/receiver mode.
Add support for the GPIO switching by specifying rcv-gpios in DT.
Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org>
Link: https://lore.kernel.org/r/20211031210956.812101-3-vincent.knecht@mailoo.org
Signed-off-by: Mark Brown <broonie@kernel.org>
With CONFIG_SND_SOC_SOF_COMPRESS=m, the compression code is
not built into a the main SOF driver when that is built-in:
x86_64-linux-ld: sound/soc/sof/ipc.o: in function `ipc_stream_message':
ipc.c:(.text+0x5a2): undefined reference to `snd_sof_compr_fragment_elapsed'
x86_64-linux-ld: sound/soc/sof/topology.o: in function `sof_dai_load':
topology.c:(.text+0x32d1): undefined reference to `snd_sof_compr_init_elapsed_work'
x86_64-linux-ld: topology.c:(.text+0x32e1): undefined reference to `snd_sof_compr_init_elapsed_work'
Make this a 'bool' symbol so it just decides whether the
code gets built at all.
Fixes: 858f7a5c45 ("ASoC: SOF: Introduce fragment elapsed notification API")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211108111132.3800548-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
When registering the mt8173-afe-pcm driver, we are also adding two
components: one is for the PCM DAIs and one is for the HDMI DAIs, but
when debugfs is enabled, we're getting the following issue:
[ 17.279176] debugfs: Directory '11220000.audio-controller' with parent 'mtk-rt5650' already present!
[ 17.288345] debugfs: Directory '11220000.audio-controller' with parent 'mtk-rt5650' already present!
To overcome to that without any potentially big rewrite of this driver,
similarly to what was done in mt8195-afe-pcm, add a debugfs_prefix to
the components before actually adding them.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20211111161108.502344-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Sometimes, end-users change the jack type under suspending,
so it needs to re-detect the combo jack type after resuming to
avoid any unexpected behaviors.
Signed-off-by: Derek Fang <derek.fang@realtek.com>
Link: https://lore.kernel.org/r/20211109095450.12950-2-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When the system suspends, the codec driver will set SAR to
power saving mode if a headset is plugged in.
There is a chance to generate an unexpected IRQ, and leads to
issues after resuming such as noise from OMTP type headsets.
Signed-off-by: Derek Fang <derek.fang@realtek.com>
Link: https://lore.kernel.org/r/20211109095450.12950-1-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Revert 'I2S Reference' to SOC_ENUM_EXT because the settings are specific
for some platforms, the default setting for 'I2S Reference' does nothing,
only some SoC platform need to configure it.
Previous 'I2S Reference' in SOC_ENUM format only toggles one bit of
RT1011_TDM1_SET_1 register, which isn't enough for specific platform.
Signed-off-by: Jack Yu <jack.yu@realtek.com>
Link: https://lore.kernel.org/r/20211111091705.20879-1-jack.yu@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Update internal ocp level to correct value.
Even the wrong ocp setting can also make the sound output, but the power
cannot match the IC capability.
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://lore.kernel.org/r/1636515921-31694-2-git-send-email-u0084500@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This product supports a SoundWire headset codec, SoundWire
capture from local microphones and two SoundWire amplifiers.
Signed-off-by: Libin Yang <libin.yang@intel.com>
Signed-off-by: Gongjun Song <gongjun.song@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20211105022646.26305-10-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Product audio hardware configuration is rt711 on link2,
two rt1316s on link0 and link1, rt714 on link 3.
Signed-off-by: Gongjun Song <gongjun.song@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20211105022646.26305-9-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This product supports a SoundWire headset codec, SoundWire
capture from local microphones and two SoundWire amplifiers.
Signed-off-by: Gongjun Song <gongjun.song@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20211105022646.26305-8-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Product audio hardware configuration is rt1316 on link2,
rt714 on link 3.
Signed-off-by: Gongjun Song <gongjun.song@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20211105022646.26305-7-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This product supports SoundWire capture from local microphones
and one SoundWire amplifier(no headset codec).
Signed-off-by: Gongjun Song <gongjun.song@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20211105022646.26305-6-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This product supports a SoundWire headset codec, SoundWire
capture from local microphones and two SoundWire amplifiers.
Signed-off-by: Gongjun Song <gongjun.song@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20211105022646.26305-5-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Both products support a SoundWire headset codec, SoundWire
capture from local microphones and two SoundWire amplifiers.
Signed-off-by: Gongjun Song <gongjun.song@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20211105022646.26305-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
New product audio hardware configuration is rt714 on link0,
two rt1316s on link1 and link2
Signed-off-by: Gongjun Song <gongjun.song@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20211105022646.26305-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This product supports SoundWire capture from local microphones
and two SoundWire amplifiers(no headset codec).
Signed-off-by: Gongjun Song <gongjun.song@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20211105022646.26305-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
