0
0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2025-01-01 19:34:35 +08:00
Commit Graph

7681 Commits

Author SHA1 Message Date
Geert Uytterhoeven
e8425dd55a clk: renesas: Make CLK_R9A06G032 invisible
When configuring a kernel including support for Renesas ARM/ARM64 Socs,
but excluding support for the RZ/N1D SoC, the user is always asked about
the RZ/N1D clock driver.  As this driver is already auto-selected when
building a kernel including support for the RZ/N1D SoC, there is no need
to make the CLK_R9A06G032 symbol visible, unless compile-testing.

Align the symbol description with the other symbols.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/4f3d30c730c30546f702715ffc648922a8156703.1628672649.git.geert+renesas@glider.be
2021-08-13 12:05:41 +02:00
Lad Prabhakar
d28b1e03dc clk: renesas: r9a07g044: Add entry for fixed clock P0_DIV2
Add entry for fixed core clock P0_DIV2 and assign LAST_DT_CORE_CLK
to R9A07G044_CLK_P0_DIV2.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20210719143811.2135-5-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-07-26 14:15:23 +02:00
Lad Prabhakar
1b87d5bba3 clk: renesas: r9a07g044: Add clock and reset entries for ADC
Add clock and reset entries for ADC block in CPG driver.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20210719085840.21842-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-07-19 11:22:23 +02:00
Lad Prabhakar
3b5c734592 clk: renesas: r9a07g044: Add clock and reset entries for CANFD
Add clock and reset entries for CANFD in CPG driver.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20210715182123.23372-6-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-07-19 11:22:21 +02:00
Geert Uytterhoeven
0aae437ac5 clk: renesas: Rename renesas-rzg2l-cpg.[ch] to rzg2l-cpg.[ch]
Rename renesas-rzg2l-cpg.c and renesas-rzg2l-cpg.h to rzg2l-cpg.c resp.
rzg2l-cpg.h, for consistency with other (sub)drivers.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/edc442daaedffcf10e835ff479d906fcae0e59db.1626268821.git.geert+renesas@glider.be
2021-07-19 11:22:20 +02:00
Lad Prabhakar
d85b82f09a clk: renesas: r9a07g044: Add GPIO clock and reset entries
Add GPIO clock and reset entries in CPG driver.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20210712194422.12405-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-07-19 11:22:10 +02:00
Biju Das
d520af3451 clk: renesas: r9a07g044: Add SSIF-2 clock and reset entries
Add SSIF-2 clock and reset entries in CPG driver.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20210702135010.5937-3-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-07-19 10:53:53 +02:00
Biju Das
03fa6e4b26 clk: renesas: r9a07g044: Add USB clocks/resets
Add clock/reset entries for USB PHY control, USB2.0 host and device.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20210630073013.22415-5-biju.das.jz@bp.renesas.com
[geert: s/usb0_device/usb0_func]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-07-19 10:53:53 +02:00
Biju Das
eb829e549b clk: renesas: r9a07g044: Add DMAC clocks/resets
Add DMAC clock and reset entries in CPG driver.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20210626081344.5783-10-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-07-19 10:53:53 +02:00
Biju Das
1962dd36db clk: renesas: r9a07g044: Add I2C clocks/resets
Add I2C{0,1,2,3} clock and reset entries.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20210626081344.5783-9-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-07-19 10:53:53 +02:00
Kieran Bingham
c346ff5ccc clk: renesas: r8a779a0: Add the DSI clocks
The DSI clock is incorrectly defined as a fixed clock. This
demonstrates itself as the dsi-encoders failing to correctly enable and
start their PPI and HS clocks internally, and causes failures.

Move the DSI parent clock to match the updates in the BSP, which
resolves the initialisation procedures.

Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Fixes: 17bcc8035d ("clk: renesas: cpg-mssr: Add support for R-Car V3U")
Link: https://lore.kernel.org/r/20210622232711.3219697-3-kieran.bingham@ideasonboard.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-07-19 10:53:52 +02:00
Kieran Bingham
417ed58dfc clk: renesas: r8a779a0: Add the DU clock
The DU clock is added to the S3D1 clock parent. The Renesas BSP lists
S2D1 as the clock parent, however there is no S2 clock on this platform.

S3D1 is chosen as a best effort guess and demonstrates functionality but
is not guaranteed to be correct.

Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Link: https://lore.kernel.org/r/20210622232711.3219697-2-kieran.bingham@ideasonboard.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-07-19 10:53:52 +02:00
Geert Uytterhoeven
d23fcff145 clk: renesas: rzg2: Rename i2c-dvfs to iic-pmic
As RZ/G2 SoCs do not support DVFS, the "iic-dvfs" module was renamed to
"iic-pmic" in the RZ/G Series, 2nd Generation User’s Manual: Hardware
Rev. 1.00.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/3e549b41989ff2797b998a1c749c9f607845f44a.1624016693.git.geert+renesas@glider.be
2021-07-19 10:53:52 +02:00
Lad Prabhakar
1606e81543 clk: renesas: rzg2l: Fix off-by-one check in rzg2l_cpg_clk_src_twocell_get()
Fix clock index out of range check for module clocks in
rzg2l_cpg_clk_src_twocell_get().

Fixes: ef3c613ccd ("clk: renesas: Add CPG core wrapper for RZ/G2L SoC")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20210617155432.18827-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-07-19 10:53:52 +02:00
Dan Carpenter
e37868f144 clk: renesas: rzg2l: Avoid mixing error pointers and NULL
These functions accidentally return both error pointers and NULL when
there is an error.  It doesn't cause a problem but it is confusing and
seems unintentional.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/YMtY7nOtqEvTokh7@mwanda
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-07-19 10:53:52 +02:00
Dan Carpenter
36aaa3a0d9 clk: renesas: rzg2l: Fix a double free on error
The "pll_clk" and "clock" pointers are allocated with devm_kzalloc() so
freeing them with kfree() will lead to a double free.  This would only
happen if probe failed, and the system is not bootable.

Fixes: ef3c613ccd ("clk: renesas: Add CPG core wrapper for RZ/G2L SoC")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/YMtYs7LVveYH4eRe@mwanda
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-07-19 10:53:52 +02:00
Yang Li
97c2975559 clk: renesas: rzg2l: Fix return value and unused assignment
Currently the function returns NULL on error, so exact error code is
lost.  This patch changes return convention of the function to use
ERR_PTR() on error instead.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/1623896524-102058-1-git-send-email-yang.lee@linux.alibaba.com
[geert: Drop curly braces]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-07-19 10:53:52 +02:00
Yang Li
d42d57fe86 clk: renesas: rzg2l: Remove unneeded semicolon
Eliminate the following coccicheck warning:
./drivers/clk/renesas/renesas-rzg2l-cpg.c:299:2-3: Unneeded semicolon

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/1623749970-38020-1-git-send-email-yang.lee@linux.alibaba.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-07-19 10:53:52 +02:00
Biju Das
c3e67ad6f5 dt-bindings: clock: r9a07g044-cpg: Update clock/reset definitions
Update clock and reset definitions as per RZ/G2L_clock_list_r02_02.xlsx
and RZ/G2L HW(Rev.0.50) manual.

Update {GIC,IA55,SCIF} clock and reset entries in the CPG driver, and
separate reset from module clocks in order to handle them efficiently.

Update the SCIF0 clock and reset index in the SoC DTSI.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20210626081344.5783-6-biju.das.jz@bp.renesas.com
Link: https://lore.kernel.org/r/20210626081344.5783-7-biju.das.jz@bp.renesas.com
Link: https://lore.kernel.org/r/20210626081344.5783-8-biju.das.jz@bp.renesas.com
[geert: Squashed 3 commits]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-07-12 10:52:03 +02:00
Biju Das
668756f729 clk: renesas: r9a07g044: Add P2 Clock support
Add support for P2 clock which is sourced from pll3_div2_4_2.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20210626081344.5783-5-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-07-12 10:52:03 +02:00
Biju Das
fd8c3f6c36 clk: renesas: r9a07g044: Fix P1 Clock
As per RZ/G2L HW Manual(Rev.0.50) P1 is sourced from pll3_div2_4.
So fix the clock definitions for P1.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20210626081344.5783-4-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-07-12 10:52:03 +02:00
Biju Das
e93c137361 clk: renesas: r9a07g044: Rename divider table
As per RZ/G2L HW Manual (Rev.0.50), CPG_PL3A_DDIV,CPG_PL3B_DDIV
and CPG_PL2_DDIV(for P0) shares same divider table entries. Rename
clk_div_table dtable_3b to clk_div_table dtable_1_32 so that it
can be reused.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20210626081344.5783-3-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-07-12 10:52:03 +02:00
Biju Das
2fa9fd69b3 clk: renesas: rzg2l: Add multi clock PM support
Add multi clock PM support for cpg driver.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20210626081344.5783-2-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-07-12 10:52:03 +02:00
Linus Torvalds
b0dfd9af28 The second batch of clk driver code for -rc1
- A handful of fixes for lmk04832 driver
  - Migrate the basic clk divider to use determine rate ops
  - Fix modpost build for hisilicon hi3559a driver
  - Actually set the parent in k210_clk_set_parent()
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAmDmPo0RHHNib3lkQGtl
 cm5lbC5vcmcACgkQrQKIl8bklSW+UA/+ID512DVohpldBQ9FPmGJ88SV/wr3fpp1
 pbJC6f3Kwc7pWS913Glj31xpRHtOMOZLbRvFIa2xBuIuP4sWu3QTAdDk9tf8/5hE
 8S7dAKwXoy2n6jVCB87sMXF+Gyd6vzU0KIdjTLX0UuF+U/scejjYAc7j8pQZ3X85
 LWb6+F4B8VQAIwExkiuDlxaaOEs0bJ6fDsj0lpFDivF7feLYmFLAO7gNIIOlQyqb
 3yY8o+dviUoGGplSU0YS9dlkCFMef4LxonqyvoVWOq6d2N3mx16gmKgdR4lpQndl
 oqoA11WPC+kmozwlG0g6g2YyZN8KOSUCgXDSm6vFB79BfR3QNv9tjNY4ybGQs1yF
 DX21n5tb5FKxXNIGWrYQAXjdMuqByCGCZCTDMWdnDx/zawTD507HCEnpQ7okSlOt
 gGsntJFeCwVn9CftmdWnRj5hp88DBa2Fu1GUmRJ86J+BMSte0QBaS5jvEnVt7kRl
 YjI1+eM2pqCqUCxY6MpQvoqvnOf3KOb3kxwuieWuZgIbnig9iN//1I0K4b4XJ1tH
 sTsUtdGxqp/asn0oMfGCurJry2iKZRaAG9XcEaUS2Mji4rvhXn02VSCvXq45iq8J
 efZg6rBnpIxZygfUiSAxgKZNRIS2bnOjNWj8BDBB3dcX/H9x17XTu+irJbRjNUEQ
 BXEgGmWMH+Q=
 =Tk4i
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull more clk updates from Stephen Boyd:

 - A handful of fixes for lmk04832 driver

 - Migrate the basic clk divider to use determine rate ops

 - Fix modpost build for hisilicon hi3559a driver

 - Actually set the parent in k210_clk_set_parent()

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  Revert "clk: divider: Switch from .round_rate to .determine_rate by default"
  clk: hisilicon: hi3559a: Drop __init markings everywhere
  clk: meson: regmap: switch to determine_rate for the dividers
  clk: divider: Switch from .round_rate to .determine_rate by default
  clk: divider: Add re-usable determine_rate implementations
  clk: k210: Fix k210_clk_set_parent()
  clk: lmk04832: Fix spelling mistakes in dev_err messages and comments
  clk: lmk04832: fix return value check in lmk04832_probe()
  clk: stm32mp1: fix missing spin_lock_init()
2021-07-08 12:12:22 -07:00
Linus Torvalds
71bd934101 Merge branch 'akpm' (patches from Andrew)
Merge more updates from Andrew Morton:
 "190 patches.

  Subsystems affected by this patch series: mm (hugetlb, userfaultfd,
  vmscan, kconfig, proc, z3fold, zbud, ras, mempolicy, memblock,
  migration, thp, nommu, kconfig, madvise, memory-hotplug, zswap,
  zsmalloc, zram, cleanups, kfence, and hmm), procfs, sysctl, misc,
  core-kernel, lib, lz4, checkpatch, init, kprobes, nilfs2, hfs,
  signals, exec, kcov, selftests, compress/decompress, and ipc"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (190 commits)
  ipc/util.c: use binary search for max_idx
  ipc/sem.c: use READ_ONCE()/WRITE_ONCE() for use_global_lock
  ipc: use kmalloc for msg_queue and shmid_kernel
  ipc sem: use kvmalloc for sem_undo allocation
  lib/decompressors: remove set but not used variabled 'level'
  selftests/vm/pkeys: exercise x86 XSAVE init state
  selftests/vm/pkeys: refill shadow register after implicit kernel write
  selftests/vm/pkeys: handle negative sys_pkey_alloc() return code
  selftests/vm/pkeys: fix alloc_random_pkey() to make it really, really random
  kcov: add __no_sanitize_coverage to fix noinstr for all architectures
  exec: remove checks in __register_bimfmt()
  x86: signal: don't do sas_ss_reset() until we are certain that sigframe won't be abandoned
  hfsplus: report create_date to kstat.btime
  hfsplus: remove unnecessary oom message
  nilfs2: remove redundant continue statement in a while-loop
  kprobes: remove duplicated strong free_insn_page in x86 and s390
  init: print out unknown kernel parameters
  checkpatch: do not complain about positive return values starting with EPOLL
  checkpatch: improve the indented label test
  checkpatch: scripts/spdxcheck.py now requires python3
  ...
2021-07-02 12:08:10 -07:00
Stephen Boyd
783d08bd02 Revert "clk: divider: Switch from .round_rate to .determine_rate by default"
This reverts commit db400ac144. We have
drivers that are still using the .round_rate ops from here. We could
implement both determine_rate and round_rate for these divider ops, but
for now let's just kick out the commit that tried to change it and
convert various drivers properly.

Reported-by: Guenter Roeck <linux@roeck-us.net>
Fixes: db400ac144 ("clk: divider: Switch from .round_rate to .determine_rate by default")
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20210702011058.77284-1-sboyd@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-07-01 18:12:59 -07:00
Linus Torvalds
514798d365 This round has a diffstat dominated by Qualcomm clk drivers. Honestly though
that's just a bunch of data so the diffstat reflects that. Looking beyond that
 there's just a bunch of updates all around in various clk drivers. Renesas and
 NXP (for i.MX) are two SoC vendors that have a lot of patches in here. Overall
 the driver changes look to be mostly enabling more clks and non-critical fixes
 that we could hold until the next merge window.
 
 I'm especially excited about the series from Arnd that graduates clkdev to be
 the only implementation of clk_get() and clk_put(). That's a good step in the
 right direction to migreate eveerything over to the common clk framework. Now
 we don't have to worry about clkdev specific details, they're just part of the
 clk API now.
 
 Core:
  - clkdev is now the only option, i.e. clk_get()/clk_put() is implemented in
    only one place in the kernel instead of in drivers/clk/clkdev.c and in
    architectures that want their own implementation
 
 New Drivers:
  - Texas Instruments' LMK04832 Ultra Low-Noise JESD204B Compliant Clock
    Jitter Cleaner With Dual Loop PLLs
  - Qualcomm MDM9607 GCC
  - Qualcomm SC8180X display clks
  - Qualcomm SM6125 GCC
  - Qualcomm SM8250 CAMCC (camera)
  - Renesas RZ/G2L SoC
  - Hisilicon hi3559A SoC
 
 Updates:
  - Stop using clock-output-names in ST clk drivers (yay!)
  - Support secure mode of STM32MP1 SoCs
  - Improve clock support for Actions S500 SoC
  - duty cycle setting support on qcom clks
  - Add TI am33xx spread spectrum clock support
  - Use determine_rate() for the Amlogic pll ops instead of round_rate()
  - Restrict Amlogic gp0/1 and audio plls range on g12a/sm1
  - Improve Amlogic axg-audio controller error on deferral
  - Add NNA clocks on Amlogic g12a
  - Reduce memory footprint of Rockchip PLL rate tables
  - A fix for the newly added Rockchip rk3568 clk driver
  - Exported clock for the newly added Rockchip video decoder
  - Remove audio ipg clock from i.MX8MP
  - Remove deprecated legacy clock binding for i.MX SCU clock driver
  - Use common clk-imx8qxp for both i.MX8QXP and i.MX8QM
  - Add multiple clocks to clk-imx8qxp driver (enet, hdmi, lcdif, audio,
    parallel interface)
  - Add dedicated clock ops for i.MX paralel interface
  - Different fixes for clocks controlled by ATF on i.MX SoCs
  - Add A53/A72 frequency scaling support i.MX clk-scu driver
  - Add special case for DCSS clock on suspend for i.MX clk-scu driver
  - Add parent save/restore on suspend/resume to i.MX clk-scu driver
  - Skip runtime PM enablement for CPU clocks in i.MX clk-scu driver
  - Remove the sys1_pll/sys2_pll clock gates for i.MX8MQ and their
    bindings
  - Tegra clk driver no longer deasserts resets on clk_enable as it
    gets in the way of certain power-up sequences
  - Fix compile testing for Tegra clk driver
  - One patch to fix a divider on the Allwinner v3s Audio PLL
  - Add support for CPU core clock boost modes on Renesas R-Car Gen3
  - Add ISPCS (Image Signal Processor) clocks on Renesas R-Car V3U
  - Switch SH/R-Mobile and R-Car "DIV6" clocks to .determine_rate()
    and improve support for multiple parents
  - Switch Renesas RZ/N1 divider clocks to .determine_rate()
  - Add ZA2 (Audio Clock Generator) clock on Renesas R-Car D3
  - Convert ar7 to common clk framework
  - Convert ralink to common clk framework
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAmDbu3sRHHNib3lkQGtl
 cm5lbC5vcmcACgkQrQKIl8bklSV+OA/9EEV3uuauFsxVm8ySX4T8amHAzE98asEX
 XldxMqBuGNnlqJn3A3LeGISKKafaRMkL/7xqBnTi9ZycDy1WRi2SiAKLTDoJCmi7
 ES32EBCO1O9D5uo4mYFsYgHUaxFmE+4tQbtDCttVt59yZEiiNPz0Lm8tWz5yuDzX
 IwCN8HrNShyL4dykTRUDuUkqrTg9sSqSvdG+XcyI24pgLtBWvJU32wIFfLN+/n9C
 JSyYwzHkajoeuv5kpAJ1IV/tzZgy77xQHunsatJWz1qJ1J2eFADWI2p3NVf88N21
 5Mw5xvikMJZ5Xq8pdZKiyEQOFfcxN/+k7hfc6eq3SDpbkaHPti9CX2rv9Uck6rdh
 Bigixsx9IHbQ+1CJAXZxcAJma/GwzoWW1irqzTQoChYgwlJIyPijFqbuJxqS4P0d
 9sEp0WvbdAEgnktiqs7gphki7Q04y2gUD3LKD6hz5sL0vZ+Dy1DY6olkWJefGrHo
 FDnEGf6gsP3vvvlJt5G2zeZQ/NzMKkfaIGLj/1hTtoLMaxpg282cmPXVUxD+ripW
 /GG/z14RdaHQXeMXduo+MeK5qUsO6LspnYown54IWilOOo1m/rfbun3yAFJaphG1
 ZQB+JDfeH8Cv6AYbNwbEpXyXyj2Rz5fGQjA31+97fCCxykZ+suBQkWqK/lUCmTyf
 ofwokRnKiYY=
 =YnCF
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "This round has a diffstat dominated by Qualcomm clk drivers. Honestly
  though that's just a bunch of data so the diffstat reflects that.
  Looking beyond that there's just a bunch of updates all around in
  various clk drivers. Renesas and NXP (for i.MX) are two SoC vendors
  that have a lot of patches in here.

  Overall the driver changes look to be mostly enabling more clks and
  non-critical fixes that we could hold until the next merge window.

  I'm especially excited about the series from Arnd that graduates
  clkdev to be the only implementation of clk_get() and clk_put().
  That's a good step in the right direction to migreate eveerything over
  to the common clk framework. Now we don't have to worry about clkdev
  specific details, they're just part of the clk API now.

  Core:
   - clkdev is now the only option, i.e. clk_get()/clk_put() is
     implemented in only one place in the kernel instead of in
     drivers/clk/clkdev.c and in architectures that want their own
     implementation

  New Drivers:
   - Texas Instruments' LMK04832 Ultra Low-Noise JESD204B Compliant
     Clock Jitter Cleaner With Dual Loop PLLs
   - Qualcomm MDM9607 GCC
   - Qualcomm SC8180X display clks
   - Qualcomm SM6125 GCC
   - Qualcomm SM8250 CAMCC (camera)
   - Renesas RZ/G2L SoC
   - Hisilicon hi3559A SoC

  Updates:
   - Stop using clock-output-names in ST clk drivers (yay!)
   - Support secure mode of STM32MP1 SoCs
   - Improve clock support for Actions S500 SoC
   - duty cycle setting support on qcom clks
   - Add TI am33xx spread spectrum clock support
   - Use determine_rate() for the Amlogic pll ops instead of
     round_rate()
   - Restrict Amlogic gp0/1 and audio plls range on g12a/sm1
   - Improve Amlogic axg-audio controller error on deferral
   - Add NNA clocks on Amlogic g12a
   - Reduce memory footprint of Rockchip PLL rate tables
   - A fix for the newly added Rockchip rk3568 clk driver
   - Exported clock for the newly added Rockchip video decoder
   - Remove audio ipg clock from i.MX8MP
   - Remove deprecated legacy clock binding for i.MX SCU clock driver
   - Use common clk-imx8qxp for both i.MX8QXP and i.MX8QM
   - Add multiple clocks to clk-imx8qxp driver (enet, hdmi, lcdif,
     audio, parallel interface)
   - Add dedicated clock ops for i.MX paralel interface
   - Different fixes for clocks controlled by ATF on i.MX SoCs
   - Add A53/A72 frequency scaling support i.MX clk-scu driver
   - Add special case for DCSS clock on suspend for i.MX clk-scu driver
   - Add parent save/restore on suspend/resume to i.MX clk-scu driver
   - Skip runtime PM enablement for CPU clocks in i.MX clk-scu driver
   - Remove the sys1_pll/sys2_pll clock gates for i.MX8MQ and their
     bindings
   - Tegra clk driver no longer deasserts resets on clk_enable as it
     gets in the way of certain power-up sequences
   - Fix compile testing for Tegra clk driver
   - One patch to fix a divider on the Allwinner v3s Audio PLL
   - Add support for CPU core clock boost modes on Renesas R-Car Gen3
   - Add ISPCS (Image Signal Processor) clocks on Renesas R-Car V3U
   - Switch SH/R-Mobile and R-Car "DIV6" clocks to .determine_rate() and
     improve support for multiple parents
   - Switch Renesas RZ/N1 divider clocks to .determine_rate()
   - Add ZA2 (Audio Clock Generator) clock on Renesas R-Car D3
   - Convert ar7 to common clk framework
   - Convert ralink to common clk framework"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (161 commits)
  clk: zynqmp: Handle divider specific read only flag
  clk: zynqmp: Use firmware specific mux clock flags
  clk: zynqmp: Use firmware specific divider clock flags
  clk: zynqmp: Use firmware specific common clock flags
  clk: lmk04832: Use of match table
  clk: lmk04832: Depend on SPI
  clk: stm32mp1: new compatible for secure RCC support
  dt-bindings: clock: stm32mp1 new compatible for secure rcc
  dt-bindings: reset: add MCU HOLD BOOT ID for SCMI reset domains on stm32mp15
  dt-bindings: reset: add IDs for SCMI reset domains on stm32mp15
  dt-bindings: clock: add IDs for SCMI clocks on stm32mp15
  reset: stm32mp1: remove stm32mp1 reset
  clk: hisilicon: Add clock driver for hi3559A SoC
  dt-bindings: Document the hi3559a clock bindings
  clk: si5341: Add sysfs properties to allow checking/resetting device faults
  clk: si5341: Add silabs,iovdd-33 property
  clk: si5341: Add silabs,xaxb-ext-clk property
  clk: si5341: Allow different output VDD_SEL values
  clk: si5341: Update initialization magic
  clk: si5341: Check for input clock presence and PLL lock on startup
  ...
2021-07-01 13:26:16 -07:00
Andy Shevchenko
f39650de68 kernel.h: split out panic and oops helpers
kernel.h is being used as a dump for all kinds of stuff for a long time.
Here is the attempt to start cleaning it up by splitting out panic and
oops helpers.

There are several purposes of doing this:
- dropping dependency in bug.h
- dropping a loop by moving out panic_notifier.h
- unload kernel.h from something which has its own domain

At the same time convert users tree-wide to use new headers, although for
the time being include new header back to kernel.h to avoid twisted
indirected includes for existing users.

[akpm@linux-foundation.org: thread_info.h needs limits.h]
[andriy.shevchenko@linux.intel.com: ia64 fix]
  Link: https://lkml.kernel.org/r/20210520130557.55277-1-andriy.shevchenko@linux.intel.com

Link: https://lkml.kernel.org/r/20210511074137.33666-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Co-developed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Wei Liu <wei.liu@kernel.org>
Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Sebastian Reichel <sre@kernel.org>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Acked-by: Helge Deller <deller@gmx.de> # parisc
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 11:06:04 -07:00
Stephen Boyd
498cc50b3f clk: hisilicon: hi3559a: Drop __init markings everywhere
This driver is a platform driver. The probe function can be called after
kernel init, and try to reference kernel memory that has been freed.
Drop the __init markings everywhere here to avoid referencing initdata
from non-init code. Fixes modpost warnings.

Reported-by: kernel test robot <lkp@intel.com>
Cc: Dongjiu Geng <gengdongjiu@huawei.com>
Fixes: 6c81966107 ("clk: hisilicon: Add clock driver for hi3559A SoC")
Link: https://lore.kernel.org/r/20210630185839.3680834-1-sboyd@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-06-30 11:59:45 -07:00
Martin Blumenstingl
e4c5ef6b95 clk: meson: regmap: switch to determine_rate for the dividers
This increases the maxmium supported frequency on 32-bit systems from
2^31 (signed long as used by clk_ops.round_rate, maximum value:
approx. 2.14GHz) to 2^32 (unsigned long as used by
clk_ops.determine_rate, maximum value: approx. 4.29GHz).
On Meson8/8b/8m2 the HDMI PLL and it's OD (post-dividers) are
capable of running at up to 2.97GHz. So switch the divider
implementation in clk-regmap to clk_ops.determine_rate to support these
higher frequencies on 32-bit systems.

Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20210627223959.188139-4-martin.blumenstingl@googlemail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-06-30 11:37:02 -07:00
Martin Blumenstingl
db400ac144 clk: divider: Switch from .round_rate to .determine_rate by default
.determine_rate is meant to replace .round_rate. The former comes with a
benefit which is especially relevant on 32-bit systems: since
.determine_rate uses an "unsigned long" (compared to a "signed long"
which is used by .round_rate) the maximum value on 32-bit systems
increases from 2^31 (or approx. 2.14GHz) to 2^32 (or approx. 4.29GHz).
Switch to a .determine_rate implementation by default so 32-bit systems
can benefit from the increased maximum value as well as so we have one
fewer user of .round_rate.

Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20210627223959.188139-3-martin.blumenstingl@googlemail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-06-30 11:37:02 -07:00
Martin Blumenstingl
bbd7a6cc38 clk: divider: Add re-usable determine_rate implementations
These are useful when running on 32-bit systems to increase the upper
supported frequency limit. clk_ops.round_rate returns a signed long
which limits the maximum rate on 32-bit systems to 2^31 (or approx.
2.14GHz). clk_ops.determine_rate internally uses an unsigned long so
the maximum rate on 32-bit systems is 2^32 or approx. 4.29GHz.

To avoid code-duplication switch over divider_{ro_,}round_rate_parent
to use the new divider_{ro_,}determine_rate functions.

Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20210627223959.188139-2-martin.blumenstingl@googlemail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-06-30 11:37:02 -07:00
Damien Le Moal
faa0e30794 clk: k210: Fix k210_clk_set_parent()
In k210_clk_set_parent(), add missing writel() call to update the mux
register of a clock to change its parent. This also fixes a compilation
warning with clang when compiling with W=1.

Fixes: c6ca7616f7 ("clk: Add RISC-V Canaan Kendryte K210 clock driver")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Link: https://lore.kernel.org/r/20210622064502.14841-1-damien.lemoal@wdc.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-06-30 11:34:36 -07:00
Colin Ian King
2cdee50eda clk: lmk04832: Fix spelling mistakes in dev_err messages and comments
There are handful of spelling mistakes in two dev_err error messages
and comments. Fix them.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210629102956.17901-1-colin.king@canonical.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-06-30 11:19:15 -07:00
Wang Hai
b424f73b6c clk: lmk04832: fix return value check in lmk04832_probe()
In case of error, the function devm_kzalloc() and devm_kcalloc() return
NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check
should be replaced with NULL test.

Fixes: 3bc61cfd6f ("clk: add support for the lmk04832")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Link: https://lore.kernel.org/r/20210630020322.2555946-1-wanghai38@huawei.com
Reviewed-by: Liam Beguin <lvb@xiphos.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-06-30 11:18:25 -07:00
Wang Hai
b1f247714a clk: stm32mp1: fix missing spin_lock_init()
The driver allocates the spinlock but not initialize it.
Use spin_lock_init() on it to initialize it correctly.

Fixes: c392df194a ("clk: stm32mp1: move RCC reset controller into RCC clock driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Link: https://lore.kernel.org/r/20210630015824.2555840-1-wanghai38@huawei.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-06-30 11:17:20 -07:00
Stephen Boyd
d2b21013bf Merge branches 'clk-st', 'clk-si' and 'clk-hisilicon' into clk-next
- Stop using clock-output-names in ST clk drivers

* clk-st:
  dt-bindings: clock: st: clkgen-fsyn: add new introduced compatible
  clk: st: clkgen-fsyn: embed soc clock outputs within compatible data
  dt-bindings: clock: st: clkgen-pll: add new introduced compatible
  clk: st: clkgen-pll: embed soc clock outputs within compatible data
  dt-bindings: clock: st: flexgen: add new introduced compatible
  clk: st: flexgen: embed soc clock outputs within compatible data
  clk: st: clkgen-pll: remove unused variable of struct clkgen_pll

* clk-si:
  clk: si5341: Add sysfs properties to allow checking/resetting device faults
  clk: si5341: Add silabs,iovdd-33 property
  clk: si5341: Add silabs,xaxb-ext-clk property
  clk: si5341: Allow different output VDD_SEL values
  clk: si5341: Update initialization magic
  clk: si5341: Check for input clock presence and PLL lock on startup
  clk: si5341: Avoid divide errors due to bogus register contents
  clk: si5341: Wait for DEVICE_READY on startup
  dt-bindings: clock: clk-si5341: Add new attributes

* clk-hisilicon:
  clk: hisilicon: Add clock driver for hi3559A SoC
  dt-bindings: Document the hi3559a clock bindings
2021-06-29 13:33:42 -07:00
Stephen Boyd
4f47c91fc6 Merge branches 'clk-lmk04832', 'clk-stm', 'clk-rohm', 'clk-actions' and 'clk-ingenic' into clk-next
- Texas Instruments' LMK04832 Ultra Low-Noise JESD204B Compliant Clock
   Jitter Cleaner With Dual Loop PLLs
 - Support secure mode of STM32MP1 SoCs
 - Improve clock support for Actions S500 SoC

* clk-lmk04832:
  clk: lmk04832: Use of match table
  clk: lmk04832: Depend on SPI
  clk: lmk04832: add support for digital delay
  clk: add support for the lmk04832
  dt-bindings: clock: add ti,lmk04832 bindings

* clk-stm:
  clk: stm32mp1: new compatible for secure RCC support
  dt-bindings: clock: stm32mp1 new compatible for secure rcc
  dt-bindings: reset: add MCU HOLD BOOT ID for SCMI reset domains on stm32mp15
  dt-bindings: reset: add IDs for SCMI reset domains on stm32mp15
  dt-bindings: clock: add IDs for SCMI clocks on stm32mp15
  reset: stm32mp1: remove stm32mp1 reset
  clk: stm32mp1: move RCC reset controller into RCC clock driver
  clk: stm32mp1: convert to module driver
  clk: stm32mp1: remove intermediate pll clocks
  clk: stm32mp1: merge 'ck_hse_rtc' and 'ck_rtc' into one clock
  clk: stm32mp1: merge 'clk-hsi-div' and 'ck_hsi' into one clock

* clk-rohm:
  clk: bd718xx: Drop BD70528 support

* clk-actions:
  clk: actions: Add NIC and ETHERNET clock support for Actions S500 SoC
  dt-bindings: clock: Add NIC and ETHERNET bindings for Actions S500 SoC
  clk: actions: Fix AHPPREDIV-H-AHB clock chain on Owl S500 SoC
  clk: actions: Fix bisp_factor_table based clocks on Owl S500 SoC
  clk: actions: Fix SD clocks factor table on Owl S500 SoC
  clk: actions: Fix UART clock dividers on Owl S500 SoC

* clk-ingenic:
  clk: ingenic: Add support for the JZ4760
  clk: ingenic: Support overriding PLLs M/N/OD calc algorithm
  clk: ingenic: Remove pll_info.no_bypass_bit
  clk: ingenic: Read bypass register only when there is one
  clk: Support bypassing dividers
  dt-bindings: clock: ingenic: Add ingenic,jz4760{,b}-cgu compatibles
2021-06-29 13:33:22 -07:00
Stephen Boyd
e51fbc55d3 Merge branches 'clk-rockchip', 'clk-amlogic', 'clk-yaml', 'clk-zynq' and 'clk-socfpga' into clk-next
* clk-rockchip:
  clk: rockchip: export ACLK_VCODEC for RK3036
  clk: rockchip: fix rk3568 cpll clk gate bits
  clk: rockchip: Optimize PLL table memory usage

* clk-amlogic:
  clk: meson: g12a: Add missing NNA source clocks for g12b
  clk: meson: axg-audio: improve deferral handling
  clk: meson: g12a: fix gp0 and hifi ranges
  clk: meson: pll: switch to determine_rate for the PLL ops

* clk-yaml:
  dt-bindings: clock: gpio-mux-clock: Convert to json-schema

* clk-zynq:
  clk: zynqmp: Handle divider specific read only flag
  clk: zynqmp: Use firmware specific mux clock flags
  clk: zynqmp: Use firmware specific divider clock flags
  clk: zynqmp: Use firmware specific common clock flags
  clk: zynqmp: pll: Remove some dead code
  clk: zynqmp: fix compile testing without ZYNQMP_FIRMWARE

* clk-socfpga:
  clk: socfpga: clk-pll: Remove unused variable 'rc'
  clk: agilex/stratix10/n5x: fix how the bypass_reg is handled
  clk: agilex/stratix10: add support for the 2nd bypass
  clk: agilex/stratix10: fix bypass representation
  clk: agilex/stratix10: remove noc_clk
2021-06-29 13:33:16 -07:00
Stephen Boyd
029eae234b Merge branches 'clk-legacy', 'clk-vc5', 'clk-allwinner', 'clk-nvidia' and 'clk-imx' into clk-next
* clk-legacy:
  clkdev: remove unused clkdev_alloc() interfaces
  clkdev: remove CONFIG_CLKDEV_LOOKUP
  m68k: coldfire: remove private clk_get/clk_put
  m68k: coldfire: use clkdev_lookup on most coldfire
  mips: ralink: convert to CONFIG_COMMON_CLK
  mips: ar7: convert to CONFIG_COMMON_CLK
  mips: ar7: convert to clkdev_lookup

* clk-vc5:
  clk: vc5: fix output disabling when enabling a FOD

* clk-allwinner:
  clk: sunxi-ng: v3s: fix incorrect postdivider on pll-audio

* clk-nvidia:
  clk: tegra: clk-tegra124-dfll-fcpu: don't use devm functions for regulator
  clk: tegra: tegra124-emc: Fix clock imbalance in emc_set_timing()
  clk: tegra: Add stubs needed for compile-testing
  clk: tegra: Don't deassert reset on enabling clocks
  clk: tegra: Mark external clocks as not having reset control
  clk: tegra: cclk: Handle thermal DIV2 CPU frequency throttling
  clk: tegra: Don't allow zero clock rate for PLLs
  clk: tegra: Halve SCLK rate on Tegra20
  clk: tegra: Ensure that PLLU configuration is applied properly
  clk: tegra: Fix refcounting of gate clocks
  clk: tegra30: Use 300MHz for video decoder by default

* clk-imx:
  clk: imx8mq: remove SYS PLL 1/2 clock gates
  clk: imx: scu: Do not enable runtime PM for CPU clks
  clk: imx: scu: add parent save and restore
  clk: imx: scu: Only save DC SS clock using non-cached clock rate
  clk: imx: scu: Add A72 frequency scaling support
  clk: imx: scu: Add A53 frequency scaling support
  clk: imx: scu: bypass pi_pll enable status restore
  clk: imx: scu: detach pd if can't power up
  clk: imx: scu: bypass cpu clock save and restore
  clk: imx: scu: add parallel port clock ops
  clk: imx: scu: add more scu clocks
  clk: imx: scu: add enet rgmii gpr clocks
  clk: imx8qm: add clock valid resource checking
  clk: imx8qxp: add clock valid checking mechnism
  clk: imx: scu: add gpr clocks support
  clk: imx: scu: remove legacy scu clock binding support
  dt-bindings: arm: imx: scu: drop deprecated legacy clock binding
  dt-bindings: arm: imx: scu: fix naming typo of clk compatible string
  clk: imx: Remove the audio ipg clock from imx8mp
2021-06-29 13:33:10 -07:00
Stephen Boyd
d915611eda Merge branches 'clk-qcom', 'clk-versatile', 'clk-renesas', 'clk-sifive' and 'clk-ti' into clk-next
- duty cycle setting support on qcom clks
 - qcom MDM9607 GCC
 - qcom sc8180x display clks
 - qcom SM6125 GCC
 - Add TI am33xx spread spectrum clock support

* clk-qcom: (22 commits)
  clk: qcom: clk-alpha-pll: fix CAL_L write in alpha_pll_fabia_prepare
  clk: qcom: Add camera clock controller driver for SM8250
  dt-bindings: clock: add QCOM SM8250 camera clock bindings
  clk: qcom: clk-alpha-pll: add support for zonda pll
  clk/qcom: Remove unused variables
  clk: qcom: smd-rpmcc: Add support for MSM8226 rpm clocks
  clk: qcom: gcc: Add support for Global Clock controller found on MSM8226
  dt-bindings: clock: qcom: Add MSM8226 GCC clock bindings
  clk: qcom: Add SM6125 (TRINKET) GCC driver
  dt-bindings: clk: qcom: gcc-sm6125: Document SM6125 GCC driver
  clk: qcom: gcc: Add support for a new frequency for SC7280
  clk: qcom: smd-rpm: Fix wrongly assigned RPM_SMD_PNOC_CLK
  dt-bindings: clock: qcom: rpmcc: Document MSM8226 compatible
  clk: qcom: dispcc-sm8250: Add EDP clocks
  clk: qcom: dispcc-sm8250: Add sc8180x support
  clk: qcom: smd-rpm: De-duplicate identical entries
  clk: qcom: smd-rpm: Switch to parent_data
  clk: qcom: Add MDM9607 GCC driver
  dt-bindings: clock: Add MDM9607 GCC clock bindings
  clk: qcom: cleanup some dev_err_probe() calls
  ...

* clk-versatile:
  clk: versatile: Depend on HAS_IOMEM
  clk: versatile: remove dependency on ARCH_*

* clk-renesas: (22 commits)
  clk: renesas: Add support for R9A07G044 SoC
  clk: renesas: Add CPG core wrapper for RZ/G2L SoC
  dt-bindings: clock: renesas: Document RZ/G2L SoC CPG driver
  dt-bindings: clock: Add r9a07g044 CPG Clock Definitions
  clk: renesas: r8a77995: Add ZA2 clock
  clk: renesas: cpg-mssr: Make srstclr[] comment block consistent
  clk: renesas: cpg-mssr: Remove unused [RM]MSTPCR() definitions
  clk: renesas: r9a06g032: Switch to .determine_rate()
  clk: renesas: div6: Implement range checking
  clk: renesas: div6: Consider all parents for requested rate
  clk: renesas: div6: Switch to .determine_rate()
  clk: renesas: div6: Simplify src mask handling
  clk: renesas: div6: Use clamp() instead of clamp_t()
  clk: renesas: rcar-usb2-clock-sel: Fix error handling in .probe()
  clk: renesas: r8a779a0: Add ISPCS clocks
  clk: renesas: rcar-gen3: Add boost support to Z clocks
  clk: renesas: rcar-gen3: Add custom clock for PLLs
  clk: renesas: rcar-gen3: Increase Z clock accuracy
  clk: renesas: rcar-gen3: Grammar s/dependent of/dependent on/
  clk: renesas: rcar-gen3: Remove superfluous masking in cpg_z_clk_set_rate()
  ...

* clk-sifive:
  clk: analogbits: fix doc warning in wrpll-cln28hpc.c
  clk: sifive: Fix kernel-doc

* clk-ti:
  drivers: ti: remove redundant error message in adpll.c
  clk: keystone: syscon-clk: Add support for AM64 specific epwm-tbclk
  dt-bindings: clock: ehrpwm: Add support for AM64 specific compatible
  clk: ti: add am33xx/am43xx spread spectrum clock support
  ARM: dts: am43xx-clocks: add spread spectrum support
  ARM: dts: am33xx-clocks: add spread spectrum support
  dt-bindings: ti: dpll: add spread spectrum support
  clk: ti: fix typo in routine description
2021-06-29 13:32:46 -07:00
Rajan Vaja
03aea91bbe clk: zynqmp: Handle divider specific read only flag
Add support for divider specific read only CCF flag
(CLK_DIVIDER_READ_ONLY).

Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Link: https://lore.kernel.org/r/20210628070122.26217-5-rajan.vaja@xilinx.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-06-28 23:35:37 -07:00
Rajan Vaja
54530ed17d clk: zynqmp: Use firmware specific mux clock flags
Use ZynqMP specific mux clock flags instead of using CCF flags.

Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Link: https://lore.kernel.org/r/20210628070122.26217-4-rajan.vaja@xilinx.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-06-28 23:35:36 -07:00
Rajan Vaja
1b09c308e6 clk: zynqmp: Use firmware specific divider clock flags
Use ZynqMP specific divider clock flags instead of using CCF flags.

Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Link: https://lore.kernel.org/r/20210628070122.26217-3-rajan.vaja@xilinx.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-06-28 23:35:36 -07:00
Rajan Vaja
610a5d8301 clk: zynqmp: Use firmware specific common clock flags
Currently firmware passes CCF specific flags to ZynqMP clock driver.
So firmware needs to be updated if CCF flags are changed. The firmware
should have its own 'flag number space' that is distinct from the
common clk framework's 'flag number space'. So define and use ZynqMP
specific common clock flags instead of using CCF flags.

Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Link: https://lore.kernel.org/r/20210628070122.26217-2-rajan.vaja@xilinx.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-06-28 23:35:36 -07:00
Stephen Boyd
bf68fdfdec clk: lmk04832: Use of match table
Presumably we want to use this match table so add a module device table
and set the driver match pointer appropriately.

Reported-by: kernel test robot <lkp@intel.com>
Cc: Liam Beguin <lvb@xiphos.com>
Fixes: 3bc61cfd6f ("clk: add support for the lmk04832")
Link: https://lore.kernel.org/r/20210629060751.3119453-2-sboyd@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-06-28 23:08:52 -07:00
Stephen Boyd
97a1c5cbbf clk: lmk04832: Depend on SPI
This driver depends on SPI. Otherwise compilation fails

  clk-lmk04832.c:(.text+0x1668): undefined reference to `spi_get_device_id'

Reported-by: kernel test robot <lkp@intel.com>
Cc: Liam Beguin <lvb@xiphos.com>
Fixes: 3bc61cfd6f ("clk: add support for the lmk04832")
Link: https://lore.kernel.org/r/20210629060751.3119453-1-sboyd@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-06-28 23:08:50 -07:00
Gabriel Fernandez
21e743300d clk: stm32mp1: new compatible for secure RCC support
Platform STM32MP1 can be used in configuration where some clock
resources cannot be accessed by Linux kernel when executing in non-secure
state of the CPU(s).
In such configuration, the RCC clock driver must not register clocks
it cannot access.
They are expected to be registered from another clock driver such
as the SCMI clock driver.
This change uses specific compatible string "st,stm32mp1-rcc-secure"
to specify RCC clock driver configuration where RCC is secure.

Signed-off-by: Etienne Carriere <etienne.carriere@foss.st.com>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Link: https://lore.kernel.org/r/20210617051814.12018-12-gabriel.fernandez@foss.st.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-06-28 16:09:10 -07:00
Dongjiu Geng
6c81966107 clk: hisilicon: Add clock driver for hi3559A SoC
Add clock drivers for hi3559A SoC, this driver
controls the SoC registers to supply different
clocks to different IPs in the SoC.

Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com>
Link: https://lore.kernel.org/r/1616498973-47067-3-git-send-email-gengdongjiu1@gmail.com
[sboyd@kernel.org: Mark arrays static, add __iomem, drop unused array,
avoid kfree of devm memory]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-06-27 20:14:24 -07:00
Robert Hancock
9b13ff4340 clk: si5341: Add sysfs properties to allow checking/resetting device faults
Add sysfs property files to allow viewing the current and latched states of
the input present and PLL lock bits, and allow resetting the latched fault
state. This allows manual checks or automated userspace polling for faults
occurring after initialization.

Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Link: https://lore.kernel.org/r/20210325192643.2190069-10-robert.hancock@calian.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-06-27 19:58:15 -07:00