So far Multicast Router Advertisements and Multicast Router
Solicitations from the Multicast Router Discovery protocol (RFC4286)
would be marked as INVALID for IPv6, even if they are in fact intact
and adhering to RFC4286.
This broke MRA reception and by that multicast reception on
IPv6 multicast routers in a Proxmox managed setup, where Proxmox
would install a rule like "-m conntrack --ctstate INVALID -j DROP"
at the top of the FORWARD chain with br-nf-call-ip6tables enabled
by default.
Similar to as it's done for MLDv1, MLDv2 and IPv6 Neighbor Discovery
already, fix this issue by excluding MRD from connection tracking
handling as MRD always uses predefined multicast destinations
for its messages, too. This changes the ct-state for ICMPv6 MRD messages
from INVALID to UNTRACKED.
This issue was found and fixed with the help of the mrdisc tool
(https://github.com/troglobit/mrdisc).
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Originally, device name used to be stored in the basechain, but it is
not the case anymore. Remove check for NETDEV_CHANGENAME.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Turn update into noop as a follow up for:
9fedd894b4 ("netfilter: nf_tables: fix unexpected EOPNOTSUPP error")
instead of adding a transaction object which is simply discarded at a
later stage of the commit protocol.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This reverts commit a580ea994f.
This revert is to resolve Dragos's report of page_pool leak here:
https://lore.kernel.org/lkml/20240424165646.1625690-2-dtatulea@nvidia.com/
The reverted patch interacts very badly with commit 2cc3aeb5ec ("skbuff:
Fix a potential race while recycling page_pool packets"). The reverted
commit hopes that the pp_recycle + is_pp_page variables do not change
between the skb_frag_ref and skb_frag_unref operation. If such a change
occurs, the skb_frag_ref/unref will not operate on the same reference type.
In the case of Dragos's report, the grabbed ref was a pp ref, but the unref
was a page ref, because the pp_recycle setting on the skb was changed.
Attempting to fix this issue on the fly is risky. Lets revert and I hope
to reland this with better understanding and testing to ensure we don't
regress some edge case while streamlining skb reffing.
Fixes: a580ea994f ("net: mirror skb frag ref/unref helpers")
Reported-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Mina Almasry <almasrymina@google.com>
Link: https://lore.kernel.org/r/20240502175423.2456544-1-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Each attribute inside a nested IFLA_VF_VLAN_LIST is assumed to be a
struct ifla_vf_vlan_info so the size of such attribute needs to be at least
of sizeof(struct ifla_vf_vlan_info) which is 14 bytes.
The current size validation in do_setvfinfo is against NLA_HDRLEN (4 bytes)
which is less than sizeof(struct ifla_vf_vlan_info) so this validation
is not enough and a too small attribute might be cast to a
struct ifla_vf_vlan_info, this might result in an out of bands
read access when accessing the saved (casted) entry in ivvl.
Fixes: 79aab093a0 ("net: Update API for VF vlan protocol 802.1ad support")
Signed-off-by: Roded Zats <rzats@paloaltonetworks.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240502155751.75705-1-rzats@paloaltonetworks.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=aeD1
-----END PGP SIGNATURE-----
Merge tag 'ipsec-2024-05-02' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2024-05-02
1) Fix an error pointer dereference in xfrm_in_fwd_icmp.
From Antony Antony.
2) Preserve vlan tags for ESP transport mode software GRO.
From Paul Davey.
3) Fix a spelling mistake in an uapi xfrm.h comment.
From Anotny Antony.
* tag 'ipsec-2024-05-02' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
xfrm: Correct spelling mistake in xfrm.h comment
xfrm: Preserve vlan tags for transport mode software GRO
xfrm: fix possible derferencing in error path
====================
Link: https://lore.kernel.org/r/20240502084838.2269355-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Switch rtnl_stats_dump() to use for_each_netdev_dump()
instead of net->dev_index_head[] hash table.
This makes the code much easier to read, and fixes
scalability issues.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240502113748.1622637-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
By returning 0 (or an error) instead of skb->len,
we allow NLMSG_DONE to be appended to the current
skb at the end of a dump, saving a couple of recvmsg()
system calls.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240502113748.1622637-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix potential null-ptr-deref in hci_le_big_sync_established_evt().
Fixes: f777d88278 (Bluetooth: ISO: Notify user space about failed bis connections)
Signed-off-by: Sungwoo Kim <iam@sung-woo.kim>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tying the msft->data lifetime to hdev by freeing it in
hci_release_dev() to fix the following case:
[use]
msft_do_close()
msft = hdev->msft_data;
if (!msft) ...(1) <- passed.
return;
mutex_lock(&msft->filter_lock); ...(4) <- used after freed.
[free]
msft_unregister()
msft = hdev->msft_data;
hdev->msft_data = NULL; ...(2)
kfree(msft); ...(3) <- msft is freed.
==================================================================
BUG: KASAN: slab-use-after-free in __mutex_lock_common
kernel/locking/mutex.c:587 [inline]
BUG: KASAN: slab-use-after-free in __mutex_lock+0x8f/0xc30
kernel/locking/mutex.c:752
Read of size 8 at addr ffff888106cbbca8 by task kworker/u5:2/309
Fixes: bf6a4e30ff ("Bluetooth: disable advertisement filters during suspend")
Signed-off-by: Sungwoo Kim <iam@sung-woo.kim>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Extend a critical section to prevent chan from early freeing.
Also make the l2cap_connect() return type void. Nothing is using the
returned value but it is ugly to return a potentially freed pointer.
Making it void will help with backports because earlier kernels did use
the return value. Now the compile will break for kernels where this
patch is not a complete fix.
Call stack summary:
[use]
l2cap_bredr_sig_cmd
l2cap_connect
┌ mutex_lock(&conn->chan_lock);
│ chan = pchan->ops->new_connection(pchan); <- alloc chan
│ __l2cap_chan_add(conn, chan);
│ l2cap_chan_hold(chan);
│ list_add(&chan->list, &conn->chan_l); ... (1)
└ mutex_unlock(&conn->chan_lock);
chan->conf_state ... (4) <- use after free
[free]
l2cap_conn_del
┌ mutex_lock(&conn->chan_lock);
│ foreach chan in conn->chan_l: ... (2)
│ l2cap_chan_put(chan);
│ l2cap_chan_destroy
│ kfree(chan) ... (3) <- chan freed
└ mutex_unlock(&conn->chan_lock);
==================================================================
BUG: KASAN: slab-use-after-free in instrument_atomic_read
include/linux/instrumented.h:68 [inline]
BUG: KASAN: slab-use-after-free in _test_bit
include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline]
BUG: KASAN: slab-use-after-free in l2cap_connect+0xa67/0x11a0
net/bluetooth/l2cap_core.c:4260
Read of size 8 at addr ffff88810bf040a0 by task kworker/u3:1/311
Fixes: 73ffa904b7 ("Bluetooth: Move conf_{req,rsp} stuff to struct l2cap_chan")
Signed-off-by: Sungwoo Kim <iam@sung-woo.kim>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This commit comes at the tail end of a greater effort to remove the
empty elements at the end of the ctl_table arrays (sentinels) which will
reduce the overall build time size of the kernel and run time memory
bloat by ~64 bytes per sentinel (further information Link :
https://lore.kernel.org/all/ZO5Yx5JFogGi%2FcBo@bombadil.infradead.org/)
Avoid a buffer overflow when traversing the ctl_table by ensuring that
AX25_MAX_VALUES is the same as the size of ax25_param_table. This is
done with a BUILD_BUG_ON where ax25_param_table is defined and a
CONFIG_AX25_DAMA_SLAVE guard in the unnamed enum definition as well as
in the ax25_dev_device_up and ax25_ds_set_timer functions.
The overflow happened when the sentinel was removed from
ax25_param_table. The sentinel's data element was changed when
CONFIG_AX25_DAMA_SLAVE was undefined. This had no adverse effects as it
still stopped on the sentinel's null procname but needed to be addressed
once the sentinel was removed.
Signed-off-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit comes at the tail end of a greater effort to remove the
empty elements at the end of the ctl_table arrays (sentinels) which will
reduce the overall build time size of the kernel and run time memory
bloat by ~64 bytes per sentinel (further information Link :
https://lore.kernel.org/all/ZO5Yx5JFogGi%2FcBo@bombadil.infradead.org/)
Remove sentinel from atalk_table ctl_table array.
Acked-by: Kees Cook <keescook@chromium.org> # loadpin & yama
Signed-off-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit comes at the tail end of a greater effort to remove the
empty elements at the end of the ctl_table arrays (sentinels) which will
reduce the overall build time size of the kernel and run time memory
bloat by ~64 bytes per sentinel (further information Link :
https://lore.kernel.org/all/ZO5Yx5JFogGi%2FcBo@bombadil.infradead.org/)
* Remove sentinel elements from ctl_table structs
* Remove instances where an array element is zeroed out to make it look
like a sentinel. This is not longer needed and is safe after commit
c899710fe7 ("networking: Update to register_net_sysctl_sz") added
the array size to the ctl_table registration
* Remove the need for having __NF_SYSCTL_CT_LAST_SYSCTL as the
sysctl array size is now in NF_SYSCTL_CT_LAST_SYSCTL
* Remove extra element in ctl_table arrays declarations
Acked-by: Kees Cook <keescook@chromium.org> # loadpin & yama
Signed-off-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit comes at the tail end of a greater effort to remove the
empty elements at the end of the ctl_table arrays (sentinels) which
will reduce the overall build time size of the kernel and run time
memory bloat by ~64 bytes per sentinel (further information Link :
https://lore.kernel.org/all/ZO5Yx5JFogGi%2FcBo@bombadil.infradead.org/)
To avoid lots of small commits, this commit brings together network
changes from (as they appear in MAINTAINERS) LLC, MPTCP, NETROM NETWORK
LAYER, PHONET PROTOCOL, ROSE NETWORK LAYER, RXRPC SOCKETS, SCTP
PROTOCOL, SHARED MEMORY COMMUNICATIONS (SMC), TIPC NETWORK LAYER and
NETWORKING [IPSEC]
* Remove sentinel element from ctl_table structs.
* Replace empty array registration with the register_net_sysctl_sz call
in llc_sysctl_init
* Replace the for loop stop condition that tests for procname == NULL
with one that depends on array size in sctp_sysctl_net_register
* Remove instances where an array element is zeroed out to make it look
like a sentinel in xfrm_sysctl_init. This is not longer needed and is
safe after commit c899710fe7 ("networking: Update to
register_net_sysctl_sz") added the array size to the ctl_table
registration
* Use a table_size variable to keep the value of ARRAY_SIZE
Signed-off-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit comes at the tail end of a greater effort to remove the
empty elements at the end of the ctl_table arrays (sentinels) which
will reduce the overall build time size of the kernel and run time
memory bloat by ~64 bytes per sentinel (further information Link :
https://lore.kernel.org/all/ZO5Yx5JFogGi%2FcBo@bombadil.infradead.org/)
* Remove sentinel element from ctl_table structs.
Signed-off-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit comes at the tail end of a greater effort to remove the
empty elements at the end of the ctl_table arrays (sentinels) which
will reduce the overall build time size of the kernel and run time
memory bloat by ~64 bytes per sentinel (further information Link :
https://lore.kernel.org/all/ZO5Yx5JFogGi%2FcBo@bombadil.infradead.org/)
* Remove sentinel element from ctl_table structs.
Signed-off-by: Joel Granados <j.granados@samsung.com>
Acked-by: Allison Henderson <allison.henderson@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit comes at the tail end of a greater effort to remove the
empty elements at the end of the ctl_table arrays (sentinels) which
will reduce the overall build time size of the kernel and run time
memory bloat by ~64 bytes per sentinel (further information Link :
https://lore.kernel.org/all/ZO5Yx5JFogGi%2FcBo@bombadil.infradead.org/)
* Remove sentinel element from ctl_table structs.
* Remove the zeroing out of an array element (to make it look like a
sentinel) in sysctl_route_net_init And ipv6_route_sysctl_init.
This is not longer needed and is safe after commit c899710fe7
("networking: Update to register_net_sysctl_sz") added the array size
to the ctl_table registration.
* Remove extra sentinel element in the declaration of devinet_vars.
* Removed the "-1" in __devinet_sysctl_register, sysctl_route_net_init,
ipv6_sysctl_net_init and ipv4_sysctl_init_net that adjusted for having
an extra empty element when looping over ctl_table arrays
* Replace the for loop stop condition in __addrconf_sysctl_register that
tests for procname == NULL with one that depends on array size
* Removing the unprivileged user check in ipv6_route_sysctl_init is
safe as it is replaced by calling ipv6_route_sysctl_table_size;
introduced in commit c899710fe7 ("networking: Update to
register_net_sysctl_sz")
* Use a table_size variable to keep the value of ARRAY_SIZE
Signed-off-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit comes at the tail end of a greater effort to remove the
empty elements at the end of the ctl_table arrays (sentinels) which
will reduce the overall build time size of the kernel and run time
memory bloat by ~64 bytes per sentinel (further information Link :
https://lore.kernel.org/all/ZO5Yx5JFogGi%2FcBo@bombadil.infradead.org/)
* Remove sentinel element from ctl_table structs.
* Remove the zeroing out of an array element (to make it look like a
sentinel) in neigh_sysctl_register and lowpan_frags_ns_sysctl_register
This is not longer needed and is safe after commit c899710fe7
("networking: Update to register_net_sysctl_sz") added the array size
to the ctl_table registration.
* Replace the for loop stop condition in sysctl_core_net_init that tests
for procname == NULL with one that depends on array size
* Removed the "-1" in mpls_net_init that adjusted for having an extra
empty element when looping over ctl_table arrays
* Use a table_size variable to keep the value of ARRAY_SIZE
Signed-off-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ath12k
* debugfs support
* dfs_simulate_radar debugfs file
* disable Wireless Extensions
* suspend and hibernation support
* ACPI support
* refactoring in preparation of multi-link support
ath11k
* support hibernation (required changes in qrtr and MHI subsystems)
* ieee80211-freq-limit Device Tree property support
ath10k
* firmware-name Device Tree property support
-----BEGIN PGP SIGNATURE-----
iQFLBAABCgA1FiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmYztxUXHHF1aWNfa3Zh
bG9AcXVpY2luYy5jb20ACgkQbhckVSbrbZs0NQf/dYF+Pjy3eh9vabwZ05rUZwLF
P/k7Q8o631Gl0LTkmGw6SseUFswAOH1uwaKpWQvjhzHE8Fy4ziMeQ+aruqtbfZ3i
Q1BYsnCbQHZ+1HX0EJmB9KDz8+/G1JxOlwiux7EsujOuFixjomm08VEJ4QXGVSnj
NnCg0zx/0njDqT/3KjJuoL4stAk0HDvIayiVGsQOwcQQJelLGudqTNmRPnKQkR5w
yRUX+NaFlVHgbbhsnEyW3XeqKVFwgy64BtNRIVpJ0lF51aazT80DagNmw5CawznC
uak1nFktAtX/AID3lWRjek3smIdlnUz39JojKW7iO60/wfZXXFbR8Xl2XEpp9g==
=fF10
-----END PGP SIGNATURE-----
Merge tag 'ath-next-20240502' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath
ath.git patches for v6.10
ath12k
* debugfs support
* dfs_simulate_radar debugfs file
* disable Wireless Extensions
* suspend and hibernation support
* ACPI support
* refactoring in preparation of multi-link support
ath11k
* support hibernation (required changes in qrtr and MHI subsystems)
* ieee80211-freq-limit Device Tree property support
ath10k
* firmware-name Device Tree property support
Currently, during color change, no link id information is passed down.
In order to support color change during Multi Link Operation, it is
required to pass link id as well.
Additionally, update notification APIs to allow drivers/mac80211 to
pass the link ID.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://msgid.link/20240422053412.2024075-2-quic_adisi@quicinc.com
Link: https://msgid.link/20240422053412.2024075-3-quic_adisi@quicinc.com
[squash, actually only pass 0 from mac80211]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
wdev->valid_links is not cleared when upper layer disconnect from a
wdev->AP MLD. It has been observed that this would prevent offchannel
operations like remain-on-channel which would be needed for user space
operations with Public Action frame.
Clear the wdev->valid_links when STA disconnects.
Signed-off-by: Xin Deng <quic_deng@quicinc.com>
Link: https://msgid.link/20240426092501.8592-1-quic_deng@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Before request->channels[] can be used, request->n_channels must be set.
Additionally, address calculations for memory after the "channels" array
need to be calculated from the allocation base ("request") rather than
via the first "out of bounds" index of "channels", otherwise run-time
bounds checking will throw a warning.
Reported-by: Nathan Chancellor <nathan@kernel.org>
Fixes: e3eac9f32e ("wifi: cfg80211: Annotate struct cfg80211_scan_request with __counted_by")
Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Link: https://msgid.link/20240424220057.work.819-kees@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This patch allows the write of tp->snd_cwnd_stamp in a bpf tcp
ca program. An use case of writing this field is to keep track
of the time whenever tp->snd_cwnd is raised or reduced inside
the `cong_control` callback.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Miao Xu <miaxu@meta.com>
Link: https://lore.kernel.org/r/20240502042318.801932-3-miaxu@meta.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
This patch adds two new arguments for cong_control of struct
tcp_congestion_ops:
- ack
- flag
These two arguments are inherited from the caller tcp_cong_control in
tcp_intput.c. One use case of them is to update cwnd and pacing rate
inside cong_control based on the info they provide. For example, the
flag can be used to decide if it is the right time to raise or reduce a
sender's cwnd.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Miao Xu <miaxu@meta.com>
Link: https://lore.kernel.org/r/20240502042318.801932-2-miaxu@meta.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Cross-merge networking fixes after downstream PR.
Conflicts:
include/linux/filter.h
kernel/bpf/core.c
66e13b615a ("bpf: verifier: prevent userspace memory access")
d503a04f8b ("bpf: Add support for certain atomics in bpf_arena to x86 JIT")
https://lore.kernel.org/all/20240429114939.210328b0@canb.auug.org.au/
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Relatively calm week, likely due to public holiday in most places.
No known outstanding regressions.
Current release - regressions:
- rxrpc: fix wrong alignmask in __page_frag_alloc_align()
- eth: e1000e: change usleep_range to udelay in PHY mdic access
Previous releases - regressions:
- gro: fix udp bad offset in socket lookup
- bpf: fix incorrect runtime stat for arm64
- tipc: fix UAF in error path
- netfs: fix a potential infinite loop in extract_user_to_sg()
- eth: ice: ensure the copied buf is NUL terminated
- eth: qeth: fix kernel panic after setting hsuid
Previous releases - always broken:
- bpf:
- verifier: prevent userspace memory access
- xdp: use flags field to disambiguate broadcast redirect
- bridge: fix multicast-to-unicast with fraglist GSO
- mptcp: ensure snd_nxt is properly initialized on connect
- nsh: fix outer header access in nsh_gso_segment().
- eth: bcmgenet: fix racing registers access
- eth: vxlan: fix stats counters.
Misc:
- a bunch of MAINTAINERS file updates
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=f6KY
-----END PGP SIGNATURE-----
Merge tag 'net-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bpf.
Relatively calm week, likely due to public holiday in most places. No
known outstanding regressions.
Current release - regressions:
- rxrpc: fix wrong alignmask in __page_frag_alloc_align()
- eth: e1000e: change usleep_range to udelay in PHY mdic access
Previous releases - regressions:
- gro: fix udp bad offset in socket lookup
- bpf: fix incorrect runtime stat for arm64
- tipc: fix UAF in error path
- netfs: fix a potential infinite loop in extract_user_to_sg()
- eth: ice: ensure the copied buf is NUL terminated
- eth: qeth: fix kernel panic after setting hsuid
Previous releases - always broken:
- bpf:
- verifier: prevent userspace memory access
- xdp: use flags field to disambiguate broadcast redirect
- bridge: fix multicast-to-unicast with fraglist GSO
- mptcp: ensure snd_nxt is properly initialized on connect
- nsh: fix outer header access in nsh_gso_segment().
- eth: bcmgenet: fix racing registers access
- eth: vxlan: fix stats counters.
Misc:
- a bunch of MAINTAINERS file updates"
* tag 'net-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (45 commits)
MAINTAINERS: mark MYRICOM MYRI-10G as Orphan
MAINTAINERS: remove Ariel Elior
net: gro: add flush check in udp_gro_receive_segment
net: gro: fix udp bad offset in socket lookup by adding {inner_}network_offset to napi_gro_cb
ipv4: Fix uninit-value access in __ip_make_skb()
s390/qeth: Fix kernel panic after setting hsuid
vxlan: Pull inner IP header in vxlan_rcv().
tipc: fix a possible memleak in tipc_buf_append
tipc: fix UAF in error path
rxrpc: Clients must accept conn from any address
net: core: reject skb_copy(_expand) for fraglist GSO skbs
net: bridge: fix multicast-to-unicast with fraglist GSO
mptcp: ensure snd_nxt is properly initialized on connect
e1000e: change usleep_range to udelay in PHY mdic access
net: dsa: mv88e6xxx: Fix number of databases for 88E6141 / 88E6341
cxgb4: Properly lock TX queue for the selftest.
rxrpc: Fix using alignmask being zero for __page_frag_alloc_align()
vxlan: Add missing VNI filter counter update in arp_reduce().
vxlan: Fix racy device stats updates.
net: qede: use return from qede_parse_actions()
...
GRO-GSO path is supposed to be transparent and as such L3 flush checks are
relevant to all UDP flows merging in GRO. This patch uses the same logic
and code from tcp_gro_receive, terminating merge if flush is non zero.
Fixes: e20cf8d3f1 ("udp: implement GRO for plain UDP sockets.")
Signed-off-by: Richard Gobert <richardbgobert@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Commits a602456 ("udp: Add GRO functions to UDP socket") and 57c67ff ("udp:
additional GRO support") introduce incorrect usage of {ip,ipv6}_hdr in the
complete phase of gro. The functions always return skb->network_header,
which in the case of encapsulated packets at the gro complete phase, is
always set to the innermost L3 of the packet. That means that calling
{ip,ipv6}_hdr for skbs which completed the GRO receive phase (both in
gro_list and *_gro_complete) when parsing an encapsulated packet's _outer_
L3/L4 may return an unexpected value.
This incorrect usage leads to a bug in GRO's UDP socket lookup.
udp{4,6}_lib_lookup_skb functions use ip_hdr/ipv6_hdr respectively. These
*_hdr functions return network_header which will point to the innermost L3,
resulting in the wrong offset being used in __udp{4,6}_lib_lookup with
encapsulated packets.
This patch adds network_offset and inner_network_offset to napi_gro_cb, and
makes sure both are set correctly.
To fix the issue, network_offsets union is used inside napi_gro_cb, in
which both the outer and the inner network offsets are saved.
Reproduction example:
Endpoint configuration example (fou + local address bind)
# ip fou add port 6666 ipproto 4
# ip link add name tun1 type ipip remote 2.2.2.1 local 2.2.2.2 encap fou encap-dport 5555 encap-sport 6666 mode ipip
# ip link set tun1 up
# ip a add 1.1.1.2/24 dev tun1
Netperf TCP_STREAM result on net-next before patch is applied:
net-next main, GRO enabled:
$ netperf -H 1.1.1.2 -t TCP_STREAM -l 5
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec
131072 16384 16384 5.28 2.37
net-next main, GRO disabled:
$ netperf -H 1.1.1.2 -t TCP_STREAM -l 5
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec
131072 16384 16384 5.01 2745.06
patch applied, GRO enabled:
$ netperf -H 1.1.1.2 -t TCP_STREAM -l 5
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec
131072 16384 16384 5.01 2877.38
Fixes: a6024562ff ("udp: Add GRO functions to UDP socket")
Signed-off-by: Richard Gobert <richardbgobert@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
KMSAN reported uninit-value access in __ip_make_skb() [1]. __ip_make_skb()
tests HDRINCL to know if the skb has icmphdr. However, HDRINCL can cause a
race condition. If calling setsockopt(2) with IP_HDRINCL changes HDRINCL
while __ip_make_skb() is running, the function will access icmphdr in the
skb even if it is not included. This causes the issue reported by KMSAN.
Check FLOWI_FLAG_KNOWN_NH on fl4->flowi4_flags instead of testing HDRINCL
on the socket.
Also, fl4->fl4_icmp_type and fl4->fl4_icmp_code are not initialized. These
are union in struct flowi4 and are implicitly initialized by
flowi4_init_output(), but we should not rely on specific union layout.
Initialize these explicitly in raw_sendmsg().
[1]
BUG: KMSAN: uninit-value in __ip_make_skb+0x2b74/0x2d20 net/ipv4/ip_output.c:1481
__ip_make_skb+0x2b74/0x2d20 net/ipv4/ip_output.c:1481
ip_finish_skb include/net/ip.h:243 [inline]
ip_push_pending_frames+0x4c/0x5c0 net/ipv4/ip_output.c:1508
raw_sendmsg+0x2381/0x2690 net/ipv4/raw.c:654
inet_sendmsg+0x27b/0x2a0 net/ipv4/af_inet.c:851
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x274/0x3c0 net/socket.c:745
__sys_sendto+0x62c/0x7b0 net/socket.c:2191
__do_sys_sendto net/socket.c:2203 [inline]
__se_sys_sendto net/socket.c:2199 [inline]
__x64_sys_sendto+0x130/0x200 net/socket.c:2199
do_syscall_64+0xd8/0x1f0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x6d/0x75
Uninit was created at:
slab_post_alloc_hook mm/slub.c:3804 [inline]
slab_alloc_node mm/slub.c:3845 [inline]
kmem_cache_alloc_node+0x5f6/0xc50 mm/slub.c:3888
kmalloc_reserve+0x13c/0x4a0 net/core/skbuff.c:577
__alloc_skb+0x35a/0x7c0 net/core/skbuff.c:668
alloc_skb include/linux/skbuff.h:1318 [inline]
__ip_append_data+0x49ab/0x68c0 net/ipv4/ip_output.c:1128
ip_append_data+0x1e7/0x260 net/ipv4/ip_output.c:1365
raw_sendmsg+0x22b1/0x2690 net/ipv4/raw.c:648
inet_sendmsg+0x27b/0x2a0 net/ipv4/af_inet.c:851
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x274/0x3c0 net/socket.c:745
__sys_sendto+0x62c/0x7b0 net/socket.c:2191
__do_sys_sendto net/socket.c:2203 [inline]
__se_sys_sendto net/socket.c:2199 [inline]
__x64_sys_sendto+0x130/0x200 net/socket.c:2199
do_syscall_64+0xd8/0x1f0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x6d/0x75
CPU: 1 PID: 15709 Comm: syz-executor.7 Not tainted 6.8.0-11567-gb3603fcb79b1 #25
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-1.fc39 04/01/2014
Fixes: 99e5acae19 ("ipv4: Fix potential uninit variable access bug in __ip_make_skb()")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Link: https://lore.kernel.org/r/20240430123945.2057348-1-syoshida@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Now that we no longer any drivers using PHYLIB's adjust_link callback,
remove all paths that made use of adjust_link as well as the associated
functions.
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20240430164816.2400606-3-florian.fainelli@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
__skb_linearize() doesn't free the skb when it fails, so move
'*buf = NULL' after __skb_linearize(), so that the skb can be
freed on the err path.
Fixes: b7df21cf1b ("tipc: skb_linearize the head skb when reassembling msgs")
Reported-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Tung Nguyen <tung.q.nguyen@dektech.com.au>
Link: https://lore.kernel.org/r/90710748c29a1521efac4f75ea01b3b7e61414cf.1714485818.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ioctl(SIOCGARP) holds rtnl_lock() to get netdev by __dev_get_by_name()
and copy dev->name safely and calls neigh_lookup() later, which looks
up a neighbour entry under RCU.
Let's replace __dev_get_by_name() with dev_get_by_name_rcu() and strscpy()
with netdev_copy_name() to avoid locking rtnl_lock().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20240430015813.71143-8-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We will convert ioctl(SIOCGARP) to RCU, and then we need to copy
dev->name which is currently protected by rtnl_lock().
This patch does the following:
1) Add seqlock netdev_rename_lock to protect dev->name
2) Add netdev_copy_name() that copies dev->name to buffer
under netdev_rename_lock
3) Use netdev_copy_name() in netdev_get_name() and drop
devnet_rename_sem
Suggested-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/netdev/CANn89iJEWs7AYSJqGCUABeVqOCTkErponfZdT5kV-iD=-SajnQ@mail.gmail.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20240430015813.71143-7-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
arp_ioctl() holds rtnl_lock() first regardless of cmd (SIOCDARP,
SIOCSARP, and SIOCGARP) to get net_device by __dev_get_by_name()
and copy dev->name safely.
In the SIOCGARP path, arp_req_get() calls neigh_lookup(), which
looks up a neighbour entry under RCU.
We will extend the RCU section not to take rtnl_lock() and instead
use dev_get_by_name_rcu() for SIOCGARP.
As a preparation, let's move __dev_get_by_name() into another
function and call it from arp_req_delete(), arp_req_set(), and
arp_req_get().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20240430015813.71143-6-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When ioctl(SIOCDARP/SIOCSARP) is issued for non-proxy entry (no ATF_COM)
without arpreq.arp_dev[] set, arp_req_set() and arp_req_delete() looks up
dev based on IPv4 address by ip_route_output().
Let's factorise the same code as arp_req_dev().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20240430015813.71143-4-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When ioctl(SIOCDARP/SIOCSARP) is issued with ATF_PUBL, r.arp_netmask
must be 0.0.0.0 or 255.255.255.255.
Currently, the netmask is validated in arp_req_delete_public() or
arp_req_set_public() under rtnl_lock().
We have ATF_NETMASK test in arp_ioctl() before holding rtnl_lock(),
so let's move the netmask validation there.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20240430015813.71143-3-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In arp_req_set(), if ATF_PERM is set in arpreq.arp_flags,
ATF_COM is set automatically.
The flag will be used later for neigh_update() only when
a neighbour entry is found.
Let's set ATF_COM just before calling neigh_update().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20240430015813.71143-2-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The find connection logic of Transarc's Rx was modified in the mid-1990s
to support multi-homed servers which might send a response packet from
an address other than the destination address in the received packet.
The rules for accepting a packet by an Rx initiator (RX_CLIENT_CONNECTION)
were altered to permit acceptance of a packet from any address provided
that the port number was unchanged and all of the connection identifiers
matched (Epoch, CID, SecurityClass, ...).
This change applies the same rules to the Linux implementation which makes
it consistent with IBM AFS 3.6, Arla, OpenAFS and AuriStorFS.
Fixes: 17926a7932 ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both")
Signed-off-by: Jeffrey Altman <jaltman@auristor.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Link: https://lore.kernel.org/r/20240419163057.4141728-1-marc.dionne@auristor.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement the helpers for the new write code in 9p. There's now an
optional ->prepare_write() that allows the filesystem to set the parameters
for the next write, such as maximum size and maximum segment count, and an
->issue_write() that is called to initiate an (asynchronous) write
operation.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: Eric Van Hensbergen <ericvh@kernel.org>
cc: Latchesar Ionkov <lucho@ionkov.net>
cc: Dominique Martinet <asmadeus@codewreck.org>
cc: Christian Schoenebeck <linux_oss@crudebyte.com>
cc: v9fs@lists.linux.dev
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
This is a followup of commit b5327b9a30 ("ipv6: use
call_rcu_hurry() in fib6_info_release()").
I had another pmtu.sh failure, and found another lazy
call_rcu() causing this failure.
aca_free_rcu() calls fib6_info_release() which releases
devices references.
We must not delay it too much or risk unregister_netdevice/ref_tracker
traces because references to netdev are not released in time.
This should speedup device/netns dismantles when CONFIG_RCU_LAZY=y
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
SKB_GSO_FRAGLIST skbs must not be linearized, otherwise they become
invalid. Return NULL if such an skb is passed to skb_copy or
skb_copy_expand, in order to prevent a crash on a potential later
call to skb_gso_segment.
Fixes: 3a1296a38d ("net: Support GRO/GSO fraglist chaining.")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: David S. Miller <davem@davemloft.net>
Calling skb_copy on a SKB_GSO_FRAGLIST skb is not valid, since it returns
an invalid linearized skb. This code only needs to change the ethernet
header, so pskb_copy is the right function to call here.
Fixes: 6db6f0eae6 ("bridge: multicast to unicast")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Reject the usage of the SA_DIR attribute in xfrm netlink messages when
it's not applicable. This ensures that SA_DIR is only accepted for
certain message types (NEWSA, UPDSA, and ALLOCSPI)
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Introduces validation for the x->dir attribute within the XFRM input
data lookup path. If the configured direction does not match the
expected direction, input, increment the XfrmInStateDirError counter
and drop the packet to ensure data integrity and correct flow handling.
grep -vw 0 /proc/net/xfrm_stat
XfrmInStateDirError 1
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Introduces validation for the x->dir attribute within the XFRM output
data lookup path. If the configured direction does not match the expected
direction, output, increment the XfrmOutStateDirError counter and drop
the packet to ensure data integrity and correct flow handling.
grep -vw 0 /proc/net/xfrm_stat
XfrmOutPolError 1
XfrmOutStateDirError 1
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
This patch introduces the 'dir' attribute, 'in' or 'out', to the
xfrm_state, SA, enhancing usability by delineating the scope of values
based on direction. An input SA will restrict values pertinent to input,
effectively segregating them from output-related values.
And an output SA will restrict attributes for output. This change aims
to streamline the configuration process and improve the overall
consistency of SA attributes during configuration.
This feature sets the groundwork for future patches, including
the upcoming IP-TFS patch.
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
KCSAN detected a race condition in netpoll:
BUG: KCSAN: data-race in net_rx_action / netpoll_send_skb
write (marked) to 0xffff8881164168b0 of 4 bytes by interrupt on cpu 10:
net_rx_action (./include/linux/netpoll.h:90 net/core/dev.c:6712 net/core/dev.c:6822)
<snip>
read to 0xffff8881164168b0 of 4 bytes by task 1 on cpu 2:
netpoll_send_skb (net/core/netpoll.c:319 net/core/netpoll.c:345 net/core/netpoll.c:393)
netpoll_send_udp (net/core/netpoll.c:?)
<snip>
value changed: 0x0000000a -> 0xffffffff
This happens because netpoll_owner_active() needs to check if the
current CPU is the owner of the lock, touching napi->poll_owner
non atomically. The ->poll_owner field contains the current CPU holding
the lock.
Use an atomic read to check if the poll owner is the current CPU.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20240429100437.3487432-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sysctl_mem_pcpu_rsv is used in TCP fast path,
move it to net_hodata for better cache locality.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240429134025.1233626-6-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move some proto memory definitions out of <net/sock.h>
Very few files need them, and following patch
will include <net/hotdata.h> from <net/proto_memory.h>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240429134025.1233626-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tcp_out_of_memory() has a single caller: tcp_check_oom().
Following patch will also make sk_memory_allocated()
not anymore visible from <net/sock.h> and <net/tcp.h>
Add const qualifier to sock argument of tcp_out_of_memory()
and tcp_check_oom().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240429134025.1233626-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sysctl_skb_defer_max is used in TCP fast path,
move it to net_hodata.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240429134025.1233626-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sysctl_max_skb_frags is used in TCP and MPTCP fast paths,
move it to net_hodata for better cache locality.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240429134025.1233626-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
I added dst_rt6_info() in commit
e8dfd42c17 ("ipv6: introduce dst_rt6_info() helper")
This patch does a similar change for IPv4.
Instead of (struct rtable *)dst casts, we can use :
#define dst_rtable(_ptr) \
container_of_const(_ptr, struct rtable, dst)
Patch is smaller than IPv6 one, because IPv4 has skb_rtable() helper.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/20240429133009.1227754-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rxrpc_alloc_data_txbuf() may be called with data_align being
zero in none_alloc_txbuf() and rxkad_alloc_txbuf(), data_align
is supposed to be an order-based alignment value, but zero is
not a valid order-based alignment value, and '~(data_align - 1)'
doesn't result in a valid mask-based alignment value for
__page_frag_alloc_align().
Fix it by passing a valid order-based alignment value in
none_alloc_txbuf() and rxkad_alloc_txbuf().
Also use page_frag_alloc_align() expecting an order-based
alignment value in rxrpc_alloc_data_txbuf() to avoid doing the
alignment converting operation and to catch possible invalid
alignment value in the future. Remove the 'if (data_align)'
checking too, as it is always true for a valid order-based
alignment value.
Fixes: 6b2536462f ("rxrpc: Fix use of changed alignment param to page_frag_alloc_align()")
Fixes: 49489bb03a ("rxrpc: Do zerocopy using MSG_SPLICE_PAGES and page frags")
CC: Alexander Duyck <alexander.duyck@gmail.com>
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Acked-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20240428111640.27306-1-linyunsheng@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Because of caching / recycling using the general page allocation
failures to induce errors in page pool allocation is very hard.
Add direct error injection support to page_pool_alloc_pages().
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240429144426.743476-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This implements operations related to merging sndbuf with peer DMB in
loopback-ism. The DMB won't be freed until no sndbuf is attached to it.
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-and-tested-by: Jan Karcher <jaka@linux.ibm.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
If the local sndbuf shares the same physical memory with peer DMB,
the cursor update processing needs to be adapted to ensure that the
data to be consumed won't be overwritten.
So in this case, the fin_curs and sndbuf_space that were originally
updated after sending the CDC message should be modified to not be
update until the peer updates cons_curs.
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-and-tested-by: Jan Karcher <jaka@linux.ibm.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
If the device used by SMC-D supports merging local sndbuf to peer DMB,
then create sndbuf descriptor and attach it to peer DMB once peer
token is obtained, and detach and free the sndbuf descriptor when the
connection is freed.
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-and-tested-by: Jan Karcher <jaka@linux.ibm.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In some scenarios using Emulated-ISM device, sndbuf can share the same
physical memory region with peer DMB to avoid data copy from one side
to the other. In such case the sndbuf is only a descriptor that
describes the shared memory and does not actually occupy memory, it's
more like a ghost buffer.
+----------+ +----------+
| socket A | | socket B |
+----------+ +----------+
| |
+--------+ +--------+
| sndbuf | | DMB |
| desc | | desc |
+--------+ +--------+
| |
| +----v-----+
+--------------------------> memory |
+----------+
So here introduces three new SMC-D device operations to check if this
feature is supported by device, and to {attach|detach} ghost sndbuf to
peer DMB. For now only loopback-ism supports this.
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-and-tested-by: Jan Karcher <jaka@linux.ibm.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
After the loopback-ism device is ready, add it to the SMC-D device list
as an ISMv2 device, and always keep it at the beginning to ensure it is
preferred for providing a shortcut for data transfer within the same
kernel.
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-and-tested-by: Jan Karcher <jaka@linux.ibm.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Since loopback-ism is not a PCI device, the PCI information fed back by
smc_nl_handle_smcd_dev() does not apply to loopback-ism. So currently
ignore loopback-ism when dumping SMC-D devices. The netlink function of
loopback-ism will be refactored when SMC netlink interface is updated.
Link: https://lore.kernel.org/r/caab067b-f5c3-490f-9259-262624c236b4@linux.ibm.com/
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-and-tested-by: Jan Karcher <jaka@linux.ibm.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Some operations are not supported by new introduced Emulated-ISM, so
mark them as optional and check if the device supports them when called.
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-and-tested-by: Jan Karcher <jaka@linux.ibm.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This implements DMB (un)registration and data move operations of
loopback-ism device.
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-and-tested-by: Jan Karcher <jaka@linux.ibm.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This implements operations related to IDs for the loopback-ism device.
loopback-ism uses an Extended GID that is a 128-bit GID instead of the
existing ISM 64-bit GID, and uses the CHID defined with the reserved
value 0xFFFF.
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-and-tested-by: Jan Karcher <jaka@linux.ibm.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This introduces a kind of Emulated-ISM device named loopback-ism for
SMCv2.1. The loopback-ism device is currently exclusive for SMC usage,
and aims to provide an SMC shortcut for sockets within the same kernel,
leading to improved intra-OS traffic performance. Configuration of this
feature is managed through the config SMC_LO.
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-and-tested-by: Jan Karcher <jaka@linux.ibm.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The struct 'ism_client' is specialized for s390 platform firmware ISM.
So replace it with 'void' to make SMCD DMB registration helper generic
for both Emulated-ISM and existing ISM.
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-and-tested-by: Jan Karcher <jaka@linux.ibm.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This is an effort to get rid of all multiplications from allocation
functions in order to prevent integer overflows [1][2].
As the "ids" variable is a pointer to "struct sctp_assoc_ids" and this
structure ends in a flexible array:
struct sctp_assoc_ids {
[...]
sctp_assoc_t gaids_assoc_id[];
};
the preferred way in the kernel is to use the struct_size() helper to
do the arithmetic instead of the calculation "size + size * count" in
the kmalloc() function.
Also, refactor the code adding the "ids_size" variable to avoid sizing
twice.
This way, the code is more readable and safer.
This code was detected with the help of Coccinelle, and audited and
modified manually.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments [1]
Link: https://github.com/KSPP/linux/issues/160 [2]
Signed-off-by: Erick Archer <erick.archer@outlook.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/PAXPR02MB724871DB78375AB06B5171C88B152@PAXPR02MB7248.eurprd02.prod.outlook.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We must initialize prune_proxy_timer before we attempt
a del_timer_sync() on it.
syzbot reported the following splat:
INFO: trying to register non-static key.
The code is fine but needs lockdep annotation, or maybe
you didn't initialize this object before use?
turning off the locking correctness validator.
CPU: 1 PID: 11 Comm: kworker/u8:1 Not tainted 6.9.0-rc5-syzkaller-01199-gfc48de77d69d #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024
Workqueue: netns cleanup_net
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114
assign_lock_key+0x238/0x270 kernel/locking/lockdep.c:976
register_lock_class+0x1cf/0x980 kernel/locking/lockdep.c:1289
__lock_acquire+0xda/0x1fd0 kernel/locking/lockdep.c:5014
lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5754
__timer_delete_sync+0x148/0x310 kernel/time/timer.c:1648
del_timer_sync include/linux/timer.h:185 [inline]
hsr_dellink+0x33/0x80 net/hsr/hsr_netlink.c:132
default_device_exit_batch+0x956/0xa90 net/core/dev.c:11737
ops_exit_list net/core/net_namespace.c:175 [inline]
cleanup_net+0x89d/0xcc0 net/core/net_namespace.c:637
process_one_work kernel/workqueue.c:3254 [inline]
process_scheduled_works+0xa10/0x17c0 kernel/workqueue.c:3335
worker_thread+0x86d/0xd70 kernel/workqueue.c:3416
kthread+0x2f0/0x390 kernel/kthread.c:388
ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK>
ODEBUG: assert_init not available (active state 0) object: ffff88806d3fcd88 object type: timer_list hint: 0x0
WARNING: CPU: 1 PID: 11 at lib/debugobjects.c:517 debug_print_object+0x17a/0x1f0 lib/debugobjects.c:514
Fixes: 5055cccfc2 ("net: hsr: Provide RedBox support (HSR-SAN)")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240426163355.2613767-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZi9+AAAKCRDbK58LschI
g0nEAP487m7L0nLVriC2oIOWsi29tklW3etm6DO7gmGRGIHgrgEAnMyV1xBj3bGj
v6jJwDcybCym1hLx+1x1JCZ4eoAFswE=
=xbna
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-04-29
We've added 147 non-merge commits during the last 32 day(s) which contain
a total of 158 files changed, 9400 insertions(+), 2213 deletions(-).
The main changes are:
1) Add an internal-only BPF per-CPU instruction for resolving per-CPU
memory addresses and implement support in x86 BPF JIT. This allows
inlining per-CPU array and hashmap lookups
and the bpf_get_smp_processor_id() helper, from Andrii Nakryiko.
2) Add BPF link support for sk_msg and sk_skb programs, from Yonghong Song.
3) Optimize x86 BPF JIT's emit_mov_imm64, and add support for various
atomics in bpf_arena which can be JITed as a single x86 instruction,
from Alexei Starovoitov.
4) Add support for passing mark with bpf_fib_lookup helper,
from Anton Protopopov.
5) Add a new bpf_wq API for deferring events and refactor sleepable
bpf_timer code to keep common code where possible,
from Benjamin Tissoires.
6) Fix BPF_PROG_TEST_RUN infra with regards to bpf_dummy_struct_ops programs
to check when NULL is passed for non-NULLable parameters,
from Eduard Zingerman.
7) Harden the BPF verifier's and/or/xor value tracking,
from Harishankar Vishwanathan.
8) Introduce crypto kfuncs to make BPF programs able to utilize the kernel
crypto subsystem, from Vadim Fedorenko.
9) Various improvements to the BPF instruction set standardization doc,
from Dave Thaler.
10) Extend libbpf APIs to partially consume items from the BPF ringbuffer,
from Andrea Righi.
11) Bigger batch of BPF selftests refactoring to use common network helpers
and to drop duplicate code, from Geliang Tang.
12) Support bpf_tail_call_static() helper for BPF programs with GCC 13,
from Jose E. Marchesi.
13) Add bpf_preempt_{disable,enable}() kfuncs in order to allow a BPF
program to have code sections where preemption is disabled,
from Kumar Kartikeya Dwivedi.
14) Allow invoking BPF kfuncs from BPF_PROG_TYPE_SYSCALL programs,
from David Vernet.
15) Extend the BPF verifier to allow different input maps for a given
bpf_for_each_map_elem() helper call in a BPF program, from Philo Lu.
16) Add support for PROBE_MEM32 and bpf_addr_space_cast instructions
for riscv64 and arm64 JITs to enable BPF Arena, from Puranjay Mohan.
17) Shut up a false-positive KMSAN splat in interpreter mode by unpoison
the stack memory, from Martin KaFai Lau.
18) Improve xsk selftest coverage with new tests on maximum and minimum
hardware ring size configurations, from Tushar Vyavahare.
19) Various ReST man pages fixes as well as documentation and bash completion
improvements for bpftool, from Rameez Rehman & Quentin Monnet.
20) Fix libbpf with regards to dumping subsequent char arrays,
from Quentin Deslandes.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (147 commits)
bpf, docs: Clarify PC use in instruction-set.rst
bpf_helpers.h: Define bpf_tail_call_static when building with GCC
bpf, docs: Add introduction for use in the ISA Internet Draft
selftests/bpf: extend BPF_SOCK_OPS_RTT_CB test for srtt and mrtt_us
bpf: add mrtt and srtt as BPF_SOCK_OPS_RTT_CB args
selftests/bpf: dummy_st_ops should reject 0 for non-nullable params
bpf: check bpf_dummy_struct_ops program params for test runs
selftests/bpf: do not pass NULL for non-nullable params in dummy_st_ops
selftests/bpf: adjust dummy_st_ops_success to detect additional error
bpf: mark bpf_dummy_struct_ops.test_1 parameter as nullable
selftests/bpf: Add ring_buffer__consume_n test.
bpf: Add bpf_guard_preempt() convenience macro
selftests: bpf: crypto: add benchmark for crypto functions
selftests: bpf: crypto skcipher algo selftests
bpf: crypto: add skcipher to bpf crypto
bpf: make common crypto API for TC/XDP programs
bpf: update the comment for BTF_FIELDS_MAX
selftests/bpf: Fix wq test.
selftests/bpf: Use make_sockaddr in test_sock_addr
selftests/bpf: Use connect_to_addr in test_sock_addr
...
====================
Link: https://lore.kernel.org/r/20240429131657.19423-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Bugfixes:
- Fix an Oops in xs_tcp_tls_setup_socket
- Fix an Oops due to missing error handling in nfs_net_init()
-----BEGIN PGP SIGNATURE-----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=OtQc
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-6.9-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client fixes from Trond Myklebust:
- Fix an Oops in xs_tcp_tls_setup_socket
- Fix an Oops due to missing error handling in nfs_net_init()
* tag 'nfs-for-6.9-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
nfs: Handle error of rpc_proc_register() in nfs_net_init().
SUNRPC: add a missing rpc_stat for TCP TLS
Instead of (struct rt6_info *)dst casts, we can use :
#define dst_rt6_info(_ptr) \
container_of_const(_ptr, struct rt6_info, dst)
Some places needed missing const qualifiers :
ip6_confirm_neigh(), ipv6_anycast_destination(),
ipv6_unicast_destination(), has_gateway()
v2: added missing parts (David Ahern)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is a followup of commit c4e86b4363 ("net: add two more
call_rcu_hurry()")
Our reference to ifa->ifa_dev must be freed ASAP
to release the reference to the netdev the same way.
inet_rcu_free_ifa()
in_dev_put()
-> in_dev_finish_destroy()
-> netdev_put()
This should speedup device/netns dismantles when CONFIG_RCU_LAZY=y
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This came while reviewing commit c4e86b4363 ("net: add two more
call_rcu_hurry()").
Paolo asked if adding one synchronize_rcu() would help.
While synchronize_rcu() does not help, making sure to call
rcu_barrier() before msleep(wait) is definitely helping
to make sure lazy call_rcu() are completed.
Instead of waiting ~100 seconds in my tests, the ref_tracker
splats occurs one time only, and netdev_wait_allrefs_any()
latency is reduced to the strict minimum.
Ideally we should audit our call_rcu() users to make sure
no refcount (or cascading call_rcu()) is held too long,
because rcu_barrier() is quite expensive.
Fixes: 0e4be9e57e ("net: use exponential backoff in netdev_wait_allrefs")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/all/28bbf698-befb-42f6-b561-851c67f464aa@kernel.org/T/#m76d73ed6b03cd930778ac4d20a777f22a08d6824
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZiwdfQAKCRDbK58LschI
g1oqAP9mjayeIHCfYMQZa2eevy1PmVlgdNdFdMDWZFS/pHv9cgD/ZdmGzbUDKCAQ
Y/KiTajitZw3kxtHX45v8/Ugtlsh9Qg=
=Ewiw
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2024-04-26
We've added 12 non-merge commits during the last 22 day(s) which contain
a total of 14 files changed, 168 insertions(+), 72 deletions(-).
The main changes are:
1) Fix BPF_PROBE_MEM in verifier and JIT to skip loads from vsyscall page,
from Puranjay Mohan.
2) Fix a crash in XDP with devmap broadcast redirect when the latter map
is in process of being torn down, from Toke Høiland-Jørgensen.
3) Fix arm64 and riscv64 BPF JITs to properly clear start time for BPF
program runtime stats, from Xu Kuohai.
4) Fix a sockmap KCSAN-reported data race in sk_psock_skb_ingress_enqueue,
from Jason Xing.
5) Fix BPF verifier error message in resolve_pseudo_ldimm64,
from Anton Protopopov.
6) Fix missing DEBUG_INFO_BTF_MODULES Kconfig menu item,
from Andrii Nakryiko.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Test PROBE_MEM of VSYSCALL_ADDR on x86-64
bpf, x86: Fix PROBE_MEM runtime load check
bpf: verifier: prevent userspace memory access
xdp: use flags field to disambiguate broadcast redirect
arm32, bpf: Reimplement sign-extension mov instruction
riscv, bpf: Fix incorrect runtime stats
bpf, arm64: Fix incorrect runtime stats
bpf: Fix a verifier verbose message
bpf, skmsg: Fix NULL pointer dereference in sk_psock_skb_ingress_enqueue
MAINTAINERS: bpf: Add Lehui and Puranjay as riscv64 reviewers
MAINTAINERS: Update email address for Puranjay Mohan
bpf, kconfig: Fix DEBUG_INFO_BTF_MODULES Kconfig definition
====================
Link: https://lore.kernel.org/r/20240426224248.26197-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
I forgot to call tcp_skb_collapse_tstamp() in the
case we consume the second skb in write queue.
Neal suggested to create a common helper used by tcp_mtu_probe()
and tcp_grow_skb().
Fixes: 8ee602c635 ("tcp: try to send bigger TSO packets")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Link: https://lore.kernel.org/r/20240425193450.411640-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
At last, we should let it work by introducing this reset reason in
trace world.
One of the possible expected outputs is:
... tcp_send_reset: skbaddr=xxx skaddr=xxx src=xxx dest=xxx
state=TCP_ESTABLISHED reason=NOT_SPECIFIED
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Since we have mapped every mptcp reset reason definition in enum
sk_rst_reason, introducing a new helper can cover some missing places
where we have already set the subflow->reset_reason.
Note: using SK_RST_REASON_NOT_SPECIFIED is the same as
SK_RST_REASON_MPTCP_RST_EUNSPEC. They are both unknown. So we can convert
it directly.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
It relies on what reset options in the skb are as rfc8684 says. Reusing
this logic can save us much energy. This patch replaces most of the prior
NOT_SPECIFIED reasons.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reuse the dropreason logic to show the exact reason of tcp reset,
so we can finally display the corresponding item in enum sk_reset_reason
instead of reinventing new reset reasons. This patch replaces all
the prior NOT_SPECIFIED reasons.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Like what we did to passive reset:
only passing possible reset reason in each active reset path.
No functional changes.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Adjust the parameter and support passing reason of reset which
is for now NOT_SPECIFIED. No functional changes.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Drop the flow-hash of the skb when forwarding to the L2TP netdev.
This avoids the L2TP qdisc from using the flow-hash from the outer
packet, which is identical for every flow within the tunnel.
This does not affect every platform but is specific for the ethernet
driver. It depends on the platform including L4 information in the
flow-hash.
One such example is the Mediatek Filogic MT798x family of networking
processors.
Fixes: d9e31d17ce ("l2tp: Add L2TP ethernet pseudowire support")
Acked-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David Bauer <mail@david-bauer.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240424171110.13701-1-mail@david-bauer.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
syzbot triggered various splats (see [0] and links) by a crafted GSO
packet of VIRTIO_NET_HDR_GSO_UDP layering the following protocols:
ETH_P_8021AD + ETH_P_NSH + ETH_P_IPV6 + IPPROTO_UDP
NSH can encapsulate IPv4, IPv6, Ethernet, NSH, and MPLS. As the inner
protocol can be Ethernet, NSH GSO handler, nsh_gso_segment(), calls
skb_mac_gso_segment() to invoke inner protocol GSO handlers.
nsh_gso_segment() does the following for the original skb before
calling skb_mac_gso_segment()
1. reset skb->network_header
2. save the original skb->{mac_heaeder,mac_len} in a local variable
3. pull the NSH header
4. resets skb->mac_header
5. set up skb->mac_len and skb->protocol for the inner protocol.
and does the following for the segmented skb
6. set ntohs(ETH_P_NSH) to skb->protocol
7. push the NSH header
8. restore skb->mac_header
9. set skb->mac_header + mac_len to skb->network_header
10. restore skb->mac_len
There are two problems in 6-7 and 8-9.
(a)
After 6 & 7, skb->data points to the NSH header, so the outer header
(ETH_P_8021AD in this case) is stripped when skb is sent out of netdev.
Also, if NSH is encapsulated by NSH + Ethernet (so NSH-Ethernet-NSH),
skb_pull() in the first nsh_gso_segment() will make skb->data point
to the middle of the outer NSH or Ethernet header because the Ethernet
header is not pulled by the second nsh_gso_segment().
(b)
While restoring skb->{mac_header,network_header} in 8 & 9,
nsh_gso_segment() does not assume that the data in the linear
buffer is shifted.
However, udp6_ufo_fragment() could shift the data and change
skb->mac_header accordingly as demonstrated by syzbot.
If this happens, even the restored skb->mac_header points to
the middle of the outer header.
It seems nsh_gso_segment() has never worked with outer headers so far.
At the end of nsh_gso_segment(), the outer header must be restored for
the segmented skb, instead of the NSH header.
To do that, let's calculate the outer header position relatively from
the inner header and set skb->{data,mac_header,protocol} properly.
[0]:
BUG: KMSAN: uninit-value in ipvlan_process_outbound drivers/net/ipvlan/ipvlan_core.c:524 [inline]
BUG: KMSAN: uninit-value in ipvlan_xmit_mode_l3 drivers/net/ipvlan/ipvlan_core.c:602 [inline]
BUG: KMSAN: uninit-value in ipvlan_queue_xmit+0xf44/0x16b0 drivers/net/ipvlan/ipvlan_core.c:668
ipvlan_process_outbound drivers/net/ipvlan/ipvlan_core.c:524 [inline]
ipvlan_xmit_mode_l3 drivers/net/ipvlan/ipvlan_core.c:602 [inline]
ipvlan_queue_xmit+0xf44/0x16b0 drivers/net/ipvlan/ipvlan_core.c:668
ipvlan_start_xmit+0x5c/0x1a0 drivers/net/ipvlan/ipvlan_main.c:222
__netdev_start_xmit include/linux/netdevice.h:4989 [inline]
netdev_start_xmit include/linux/netdevice.h:5003 [inline]
xmit_one net/core/dev.c:3547 [inline]
dev_hard_start_xmit+0x244/0xa10 net/core/dev.c:3563
__dev_queue_xmit+0x33ed/0x51c0 net/core/dev.c:4351
dev_queue_xmit include/linux/netdevice.h:3171 [inline]
packet_xmit+0x9c/0x6b0 net/packet/af_packet.c:276
packet_snd net/packet/af_packet.c:3081 [inline]
packet_sendmsg+0x8aef/0x9f10 net/packet/af_packet.c:3113
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg net/socket.c:745 [inline]
__sys_sendto+0x735/0xa10 net/socket.c:2191
__do_sys_sendto net/socket.c:2203 [inline]
__se_sys_sendto net/socket.c:2199 [inline]
__x64_sys_sendto+0x125/0x1c0 net/socket.c:2199
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x63/0x6b
Uninit was created at:
slab_post_alloc_hook mm/slub.c:3819 [inline]
slab_alloc_node mm/slub.c:3860 [inline]
__do_kmalloc_node mm/slub.c:3980 [inline]
__kmalloc_node_track_caller+0x705/0x1000 mm/slub.c:4001
kmalloc_reserve+0x249/0x4a0 net/core/skbuff.c:582
__alloc_skb+0x352/0x790 net/core/skbuff.c:651
skb_segment+0x20aa/0x7080 net/core/skbuff.c:4647
udp6_ufo_fragment+0xcab/0x1150 net/ipv6/udp_offload.c:109
ipv6_gso_segment+0x14be/0x2ca0 net/ipv6/ip6_offload.c:152
skb_mac_gso_segment+0x3e8/0x760 net/core/gso.c:53
nsh_gso_segment+0x6f4/0xf70 net/nsh/nsh.c:108
skb_mac_gso_segment+0x3e8/0x760 net/core/gso.c:53
__skb_gso_segment+0x4b0/0x730 net/core/gso.c:124
skb_gso_segment include/net/gso.h:83 [inline]
validate_xmit_skb+0x107f/0x1930 net/core/dev.c:3628
__dev_queue_xmit+0x1f28/0x51c0 net/core/dev.c:4343
dev_queue_xmit include/linux/netdevice.h:3171 [inline]
packet_xmit+0x9c/0x6b0 net/packet/af_packet.c:276
packet_snd net/packet/af_packet.c:3081 [inline]
packet_sendmsg+0x8aef/0x9f10 net/packet/af_packet.c:3113
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg net/socket.c:745 [inline]
__sys_sendto+0x735/0xa10 net/socket.c:2191
__do_sys_sendto net/socket.c:2203 [inline]
__se_sys_sendto net/socket.c:2199 [inline]
__x64_sys_sendto+0x125/0x1c0 net/socket.c:2199
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x63/0x6b
CPU: 1 PID: 5101 Comm: syz-executor421 Not tainted 6.8.0-rc5-syzkaller-00297-gf2e367d6ad3b #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024
Fixes: c411ed8545 ("nsh: add GSO support")
Reported-and-tested-by: syzbot+42a0dc856239de4de60e@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=42a0dc856239de4de60e
Reported-and-tested-by: syzbot+c298c9f0e46a3c86332b@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=c298c9f0e46a3c86332b
Link: https://lore.kernel.org/netdev/20240415222041.18537-1-kuniyu@amazon.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20240424023549.21862-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Introduce RedBox support (HSR-SAN to be more precise) for HSR networks.
Following traffic reduction optimizations have been implemented:
- Do not send HSR supervisory frames to Port C (interlink)
- Do not forward to HSR ring frames addressed to Port C
- Do not forward to Port C frames from HSR ring
- Do not send duplicate HSR frame to HSR ring when destination is Port C
The corresponding patch to modify iptable2 sources has already been sent:
https://lore.kernel.org/netdev/20240308145729.490863-1-lukma@denx.de/T/
Testing procedure (veth and netns):
-----------------------------------
One shall run:
linux-vanila/tools/testing/selftests/net/hsr/hsr_redbox.sh
(Detailed description of the setup one can find in the test
script file).
Testing procedure (real hardware):
----------------------------------
The EVB-KSZ9477 has been used for testing on net-next branch
(SHA1: 5fc68320c1).
Ports 4/5 were used for SW managed HSR (hsr1) as first hsr0 for ports 1/2
(with HW offloading for ksz9477) was created. Port 3 has been used as
interlink port (single USB-ETH dongle).
Configuration - RedBox (EVB-KSZ9477):
if link set lan1 down;ip link set lan2 down
ip link add name hsr0 type hsr slave1 lan1 slave2 lan2 supervision 45 version 1
ip link add name hsr1 type hsr slave1 lan4 slave2 lan5 interlink lan3 supervision 45 version 1
ip link set lan4 up;ip link set lan5 up
ip link set lan3 up
ip addr add 192.168.0.11/24 dev hsr1
ip link set hsr1 up
Configuration - DAN-H (EVB-KSZ9477):
ip link set lan1 down;ip link set lan2 down
ip link add name hsr0 type hsr slave1 lan1 slave2 lan2 supervision 45 version 1
ip link add name hsr1 type hsr slave1 lan4 slave2 lan5 supervision 45 version 1
ip link set lan4 up;ip link set lan5 up
ip addr add 192.168.0.12/24 dev hsr1
ip link set hsr1 up
This approach uses only SW based HSR devices (hsr1).
-------------- ----------------- ------------
DAN-H Port5 | <------> | Port5 | |
Port4 | <------> | Port4 Port3 | <---> | PC
| | (RedBox) | | (USB-ETH)
EVB-KSZ9477 | | EVB-KSZ9477 | |
-------------- ----------------- ------------
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Xiumei and Christoph reported the following lockdep splat, complaining of
the qdisc root lock being taken twice:
============================================
WARNING: possible recursive locking detected
6.7.0-rc3+ #598 Not tainted
--------------------------------------------
swapper/2/0 is trying to acquire lock:
ffff888177190110 (&sch->q.lock){+.-.}-{2:2}, at: __dev_queue_xmit+0x1560/0x2e70
but task is already holding lock:
ffff88811995a110 (&sch->q.lock){+.-.}-{2:2}, at: __dev_queue_xmit+0x1560/0x2e70
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&sch->q.lock);
lock(&sch->q.lock);
*** DEADLOCK ***
May be due to missing lock nesting notation
5 locks held by swapper/2/0:
#0: ffff888135a09d98 ((&in_dev->mr_ifc_timer)){+.-.}-{0:0}, at: call_timer_fn+0x11a/0x510
#1: ffffffffaaee5260 (rcu_read_lock){....}-{1:2}, at: ip_finish_output2+0x2c0/0x1ed0
#2: ffffffffaaee5200 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x209/0x2e70
#3: ffff88811995a110 (&sch->q.lock){+.-.}-{2:2}, at: __dev_queue_xmit+0x1560/0x2e70
#4: ffffffffaaee5200 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x209/0x2e70
stack backtrace:
CPU: 2 PID: 0 Comm: swapper/2 Not tainted 6.7.0-rc3+ #598
Hardware name: Red Hat KVM, BIOS 1.13.0-2.module+el8.3.0+7353+9de0a3cc 04/01/2014
Call Trace:
<IRQ>
dump_stack_lvl+0x4a/0x80
__lock_acquire+0xfdd/0x3150
lock_acquire+0x1ca/0x540
_raw_spin_lock+0x34/0x80
__dev_queue_xmit+0x1560/0x2e70
tcf_mirred_act+0x82e/0x1260 [act_mirred]
tcf_action_exec+0x161/0x480
tcf_classify+0x689/0x1170
prio_enqueue+0x316/0x660 [sch_prio]
dev_qdisc_enqueue+0x46/0x220
__dev_queue_xmit+0x1615/0x2e70
ip_finish_output2+0x1218/0x1ed0
__ip_finish_output+0x8b3/0x1350
ip_output+0x163/0x4e0
igmp_ifc_timer_expire+0x44b/0x930
call_timer_fn+0x1a2/0x510
run_timer_softirq+0x54d/0x11a0
__do_softirq+0x1b3/0x88f
irq_exit_rcu+0x18f/0x1e0
sysvec_apic_timer_interrupt+0x6f/0x90
</IRQ>
This happens when TC does a mirred egress redirect from the root qdisc of
device A to the root qdisc of device B. As long as these two locks aren't
protecting the same qdisc, they can be acquired in chain: add a per-qdisc
lockdep key to silence false warnings.
This dynamic key should safely replace the static key we have in sch_htb:
it was added to allow enqueueing to the device "direct qdisc" while still
holding the qdisc root lock.
v2: don't use static keys anymore in HTB direct qdiscs (thanks Eric Dumazet)
CC: Maxim Mikityanskiy <maxim@isovalent.com>
CC: Xiumei Mu <xmu@redhat.com>
Reported-by: Christoph Paasch <cpaasch@apple.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/451
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Link: https://lore.kernel.org/r/7dc06d6158f72053cf877a82e2a7a5bd23692faa.1713448007.git.dcaratti@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The software GRO path for esp transport mode uses skb_mac_header_rebuild
prior to re-injecting the packet via the xfrm_napi_dev. This only
copies skb->mac_len bytes of header which may not be sufficient if the
packet contains 802.1Q tags or other VLAN tags. Worse copying only the
initial header will leave a packet marked as being VLAN tagged but
without the corresponding tag leading to mangling when it is later
untagged.
The VLAN tags are important when receiving the decrypted esp transport
mode packet after GRO processing to ensure it is received on the correct
interface.
Therefore record the full mac header length in xfrm*_transport_input for
later use in corresponding xfrm*_transport_finish to copy the entire mac
header when rebuilding the mac header for GRO. The skb->data pointer is
left pointing skb->mac_header bytes after the start of the mac header as
is expected by the network stack and network and transport header
offsets reset to this location.
Fixes: 7785bba299 ("esp: Add a software GRO codepath")
Signed-off-by: Paul Davey <paul.davey@alliedtelesis.co.nz>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Main goal of memory allocation profiling patchset is to provide accounting
that is cheap enough to run in production. To achieve that we inject
counters using codetags at the allocation call sites to account every time
allocation is made. This injection allows us to perform accounting
efficiently because injected counters are immediately available as opposed
to the alternative methods, such as using _RET_IP_, which would require
counter lookup and appropriate locking that makes accounting much more
expensive. This method requires all allocation functions to inject
separate counters at their call sites so that their callers can be
individually accounted. Counter injection is implemented by allocation
hooks which should wrap all allocation functions.
Inlined functions which perform allocations but do not use allocation
hooks are directly charged for the allocations they perform. In most
cases these functions are just specialized allocation wrappers used from
multiple places to allocate objects of a specific type. It would be more
useful to do the accounting at their call sites instead. Instrument these
helpers to do accounting at the call site. Simple inlined allocation
wrappers are converted directly into macros. More complex allocators or
allocators with documentation are converted into _noprof versions and
allocation hooks are added. This allows memory allocation profiling
mechanism to charge allocations to the callers of these functions.
Link: https://lkml.kernel.org/r/20240415020731.1152108-1-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Acked-by: Jan Kara <jack@suse.cz> [jbd2]
Cc: Anna Schumaker <anna@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jakub Sitnicki <jakub@cloudflare.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tony Nguyen says:
====================
net: intel: start The Great Code Dedup + Page Pool for iavf
Alexander Lobakin says:
Here's a two-shot: introduce {,Intel} Ethernet common library (libeth and
libie) and switch iavf to Page Pool. Details are in the commit messages;
here's a summary:
Not a secret there's a ton of code duplication between two and more Intel
ethernet modules. Before introducing new changes, which would need to be
copied over again, start decoupling the already existing duplicate
functionality into a new module, which will be shared between several
Intel Ethernet drivers. The first name that came to my mind was
"libie" -- "Intel Ethernet common library". Also this sounds like
"lovelie" (-> one word, no "lib I E" pls) and can be expanded as
"lib Internet Explorer" :P
The "generic", pure-software part is placed separately, so that it can be
easily reused in any driver by any vendor without linking to the Intel
pre-200G guts. In a few words, it's something any modern driver does the
same way, but nobody moved it level up (yet).
The series is only the beginning. From now on, adding every new feature
or doing any good driver refactoring will remove much more lines than add
for quite some time. There's a basic roadmap with some deduplications
planned already, not speaking of that touching every line now asks:
"can I share this?". The final destination is very ambitious: have only
one unified driver for at least i40e, ice, iavf, and idpf with a struct
ops for each generation. That's never gonna happen, right? But you still
can at least try.
PP conversion for iavf lands within the same series as these two are tied
closely. libie will support Page Pool model only, so that a driver can't
use much of the lib until it's converted. iavf is only the example, the
rest will eventually be converted soon on a per-driver basis. That is
when it gets really interesting. Stay tech.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
MAINTAINERS: add entry for libeth and libie
iavf: switch to Page Pool
iavf: pack iavf_ring more efficiently
libeth: add Rx buffer management
page_pool: add DMA-sync-for-CPU inline helper
page_pool: constify some read-only function arguments
slab: introduce kvmalloc_array_node() and kvcalloc_node()
iavf: drop page splitting and recycling
iavf: kill "legacy-rx" for good
net: intel: introduce {, Intel} Ethernet common library
====================
Link: https://lore.kernel.org/r/20240424203559.3420468-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Two important arguments in RTT estimation, mrtt and srtt, are passed to
tcp_bpf_rtt(), so that bpf programs get more information about RTT
computation in BPF_SOCK_OPS_RTT_CB.
The difference between bpf_sock_ops->srtt_us and the srtt here is: the
former is an old rtt before update, while srtt passed by tcp_bpf_rtt()
is that after update.
Signed-off-by: Philo Lu <lulie@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240425161724.73707-2-lulie@linux.alibaba.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
When doing BPF_PROG_TEST_RUN for bpf_dummy_struct_ops programs,
reject execution when NULL is passed for non-nullable params.
For programs with non-nullable params verifier assumes that
such params are never NULL and thus might optimize out NULL checks.
Suggested-by: Kui-Feng Lee <sinquersw@gmail.com>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240424012821.595216-5-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Test case dummy_st_ops/dummy_init_ret_value passes NULL as the first
parameter of the test_1() function. Mark this parameter as nullable to
make verifier aware of such possibility.
Otherwise, NULL check in the test_1() code:
SEC("struct_ops/test_1")
int BPF_PROG(test_1, struct bpf_dummy_ops_state *state)
{
if (!state)
return ...;
... access state ...
}
Might be removed by verifier, thus triggering NULL pointer dereference
under certain conditions.
Reported-by: Jose E. Marchesi <jemarch@gnu.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240424012821.595216-2-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
While testing TCP performance with latest trees,
I saw suspect SOCKET_BACKLOG drops.
tcp_add_backlog() computes its limit with :
limit = (u32)READ_ONCE(sk->sk_rcvbuf) +
(u32)(READ_ONCE(sk->sk_sndbuf) >> 1);
limit += 64 * 1024;
This does not take into account that sk->sk_backlog.len
is reset only at the very end of __release_sock().
Both sk->sk_backlog.len and sk->sk_rmem_alloc could reach
sk_rcvbuf in normal conditions.
We should double sk->sk_rcvbuf contribution in the formula
to absorb bubbles in the backlog, which happen more often
for very fast flows.
This change maintains decent protection against abuses.
Fixes: c377411f24 ("net: sk_add_backlog() take rmem_alloc into account")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240423125620.3309458-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The second "new features" pull request for v6.10 with changes both in
stack and in drivers. This time the pull request is rather small and
nothing special standing out except maybe that we have several
kernel-doc fixes. Great to see that we are getting warning free
wireless code (until new warnings are added).
Do note that this pull request has a simple conflict in mac80211 with
net tree, here's an example conflict resolution:
https://lore.kernel.org/all/20240422105623.7b1fbda2@canb.auug.org.au/
Major changes:
rtl8xxxu:
* enable Management Frame Protection (MFP) support
rtw88:
* disable unsupported interface type of mesh point for all chips, and only
support station mode for SDIO chips.
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmYo194RHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZvS4Qf/VgymhfRmZ3UfqQiL9uu806ol3tBOnhAG
zGo//wBVVgdOEWZhVtW2aVvPH1pGRnocxWZG8/G0zx4N3YaMtDocV8X3gRp8JpGI
Gk4Atc7J6Eyyp+Csxz2HvG0BwvkcEt65GwBpE2PmrEukMByS29EzjUppUZISlBKM
7e3rqKbLMVPueIoKfTImpWGJVdYOCvErbqZakcXV97eQw3wOb/NLIOBAPobrx8oS
cNdtLhEHwZzAtwYWL7VzU6HBsmBMpSCBl08Pobq8esH82x6yCoHVmyQlb7SS+iZ1
klffYjoPT0fWUAMjHJdM26KJ77GXOHtphxmTeS5xnrq/+AhPDJmdNg==
=0Ijq
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2024-04-24' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.10
The second "new features" pull request for v6.10 with changes both in
stack and in drivers. This time the pull request is rather small and
nothing special standing out except maybe that we have several
kernel-doc fixes. Great to see that we are getting warning free
wireless code (until new warnings are added).
Major changes:
rtl8xxxu:
* enable Management Frame Protection (MFP) support
rtw88:
* disable unsupported interface type of mesh point for all chips, and only
support station mode for SDIO chips.
* tag 'wireless-next-2024-04-24' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (63 commits)
wifi: mac80211: handle link ID during management Tx
wifi: mac80211: handle sdata->u.ap.active flag with MLO
wifi: cfg80211: add return docs for regulatory functions
wifi: cfg80211: make some regulatory functions void
wifi: mac80211: add return docs for sta_info_flush()
wifi: mac80211: keep mac80211 consistent on link activation failure
wifi: mac80211: simplify ieee80211_assign_link_chanctx()
wifi: mac80211: reserve chanctx during find
wifi: cfg80211: fix cfg80211 function kernel-doc
wifi: mac80211_hwsim: Use wider regulatory for custom for 6GHz tests
wifi: iwlwifi: mvm: Don't allow EMLSR when the RSSI is low
wifi: iwlwifi: mvm: disable EMLSR when we suspend with wowlan
wifi: iwlwifi: mvm: get periodic statistics in EMLSR
wifi: iwlwifi: mvm: don't recompute EMLSR mode in can_activate_links
wifi: iwlwifi: mvm: implement EMLSR prevention mechanism.
wifi: iwlwifi: mvm: exit EMLSR upon missed beacon
wifi: iwlwifi: mvm: init vif works only once
wifi: iwlwifi: mvm: Add helper functions to update EMLSR status
wifi: iwlwifi: mvm: Implement new link selection algorithm
wifi: iwlwifi: mvm: move EMLSR/links code
...
====================
Link: https://lore.kernel.org/r/20240424100122.217AEC113CE@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nothing major, regression fixes are mostly in drivers, two more
of those are flowing towards us thru various trees. I wish some of
the changes went into -rc5, we'll try to keep an eye on frequency
of PRs from sub-trees.
Also disproportional number of fixes for bugs added in v6.4,
strange coincidence.
Current release - regressions:
- igc: fix LED-related deadlock on driver unbind
- wifi: mac80211: small fixes to recent clean up of the connection
process
- Revert "wifi: iwlwifi: bump FW API to 90 for BZ/SC devices",
kernel doesn't have all the code to deal with that version, yet
- Bluetooth:
- set power_ctrl_enabled on NULL returned by gpiod_get_optional()
- qca: fix invalid device address check, again
- eth: ravb: fix registered interrupt names
Current release - new code bugs:
- wifi: mac80211: check EHT/TTLM action frame length
Previous releases - regressions:
- fix sk_memory_allocated_{add|sub} for architectures where
__this_cpu_{add|sub}* are not IRQ-safe
- dsa: mv88e6xx: fix link setup for 88E6250
Previous releases - always broken:
- ip: validate dev returned from __in_dev_get_rcu(), prevent possible
null-derefs in a few places
- switch number of for_each_rcu() loops using call_rcu() on the iterator
to for_each_safe()
- macsec: fix isolation of broadcast traffic in presence of offload
- vxlan: drop packets from invalid source address
- eth: mlxsw: trap and ACL programming fixes
- eth: bnxt: PCIe error recovery fixes, fix counting dropped packets
- Bluetooth:
- lots of fixes for the command submission rework from v6.4
- qca: fix NULL-deref on non-serdev suspend
Misc:
- tools: ynl: don't ignore errors in NLMSG_DONE messages
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=EQyI
-----END PGP SIGNATURE-----
Merge tag 'net-6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, wireless and bluetooth.
Nothing major, regression fixes are mostly in drivers, two more of
those are flowing towards us thru various trees. I wish some of the
changes went into -rc5, we'll try to keep an eye on frequency of PRs
from sub-trees.
Also disproportional number of fixes for bugs added in v6.4, strange
coincidence.
Current release - regressions:
- igc: fix LED-related deadlock on driver unbind
- wifi: mac80211: small fixes to recent clean up of the connection
process
- Revert "wifi: iwlwifi: bump FW API to 90 for BZ/SC devices", kernel
doesn't have all the code to deal with that version, yet
- Bluetooth:
- set power_ctrl_enabled on NULL returned by gpiod_get_optional()
- qca: fix invalid device address check, again
- eth: ravb: fix registered interrupt names
Current release - new code bugs:
- wifi: mac80211: check EHT/TTLM action frame length
Previous releases - regressions:
- fix sk_memory_allocated_{add|sub} for architectures where
__this_cpu_{add|sub}* are not IRQ-safe
- dsa: mv88e6xx: fix link setup for 88E6250
Previous releases - always broken:
- ip: validate dev returned from __in_dev_get_rcu(), prevent possible
null-derefs in a few places
- switch number of for_each_rcu() loops using call_rcu() on the
iterator to for_each_safe()
- macsec: fix isolation of broadcast traffic in presence of offload
- vxlan: drop packets from invalid source address
- eth: mlxsw: trap and ACL programming fixes
- eth: bnxt: PCIe error recovery fixes, fix counting dropped packets
- Bluetooth:
- lots of fixes for the command submission rework from v6.4
- qca: fix NULL-deref on non-serdev suspend
Misc:
- tools: ynl: don't ignore errors in NLMSG_DONE messages"
* tag 'net-6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (88 commits)
af_unix: Suppress false-positive lockdep splat for spin_lock() in __unix_gc().
net: b44: set pause params only when interface is up
tls: fix lockless read of strp->msg_ready in ->poll
dpll: fix dpll_pin_on_pin_register() for multiple parent pins
net: ravb: Fix registered interrupt names
octeontx2-af: fix the double free in rvu_npc_freemem()
net: ethernet: ti: am65-cpts: Fix PTPv1 message type on TX packets
ice: fix LAG and VF lock dependency in ice_reset_vf()
iavf: Fix TC config comparison with existing adapter TC config
i40e: Report MFS in decimal base instead of hex
i40e: Do not use WQ_MEM_RECLAIM flag for workqueue
net: ti: icssg-prueth: Fix signedness bug in prueth_init_rx_chns()
net/mlx5e: Advertise mlx5 ethernet driver updates sk_buff md_dst for MACsec
macsec: Detect if Rx skb is macsec-related for offloading devices that update md_dst
ethernet: Add helper for assigning packet type when dest address does not match device address
macsec: Enable devices to advertise whether they update sk_buff md_dst during offloads
net: phy: dp83869: Fix MII mode failure
netfilter: nf_tables: honor table dormant flag from netdev release event path
eth: bnxt: fix counting packets discarded due to OOM and netpoll
igc: Fix LED-related deadlock on driver unbind
...
-----BEGIN PGP SIGNATURE-----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=YK6G
-----END PGP SIGNATURE-----
Merge tag 'nf-24-04-25' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter/IPVS fixes for net
The following patchset contains two Netfilter/IPVS fixes for net:
Patch #1 fixes SCTP checksumming for IPVS with gso packets,
from Ismael Luceno.
Patch #2 honor dormant flag from netdev event path to fix a possible
double hook unregistration.
* tag 'nf-24-04-25' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: honor table dormant flag from netdev release event path
ipvs: Fix checksumming on GSO of SCTP packets
====================
Link: https://lore.kernel.org/r/20240425090149.1359547-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tls_sk_poll is called without locking the socket, and needs to read
strp->msg_ready (via tls_strp_msg_ready). Convert msg_ready to a bool
and use READ_ONCE/WRITE_ONCE where needed. The remaining reads are
only performed when the socket is locked.
Fixes: 121dca784f ("tls: suppress wakeups unless we have a full record")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/0b7ee062319037cf86af6b317b3d72f7bfcd2e97.1713797701.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In br_fill_forward_path(), f->dst is checked not to be NULL, then
immediately read using READ_ONCE and checked again. The first check is
useless, so this patch aims to remove the redundant check of f->dst.
Signed-off-by: linke li <lilinke99@qq.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
* ath11k: convert to correct RCU iteration of IPv6 addresses
* iwlwifi: link ID, FW API version, scanning and PASN fixes
* cfg80211: NULL-deref and tracing fixes
* mac80211: connection mode, mesh fast-TX, multi-link and
various other small fixes
-----BEGIN PGP SIGNATURE-----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=dPas
-----END PGP SIGNATURE-----
Merge tag 'wireless-2024-04-23' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes berg says:
====================
Fixes for the current cycle:
* ath11k: convert to correct RCU iteration of IPv6 addresses
* iwlwifi: link ID, FW API version, scanning and PASN fixes
* cfg80211: NULL-deref and tracing fixes
* mac80211: connection mode, mesh fast-TX, multi-link and
various other small fixes
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Marking TCP_SKB_CB(skb)->sacked with TCPCB_EVER_RETRANS after the
traceopint (trace_tcp_retransmit_skb), then we can get the
retransmission efficiency by counting skbs w/ and w/o TCPCB_EVER_RETRANS
mark in this tracepoint.
We have discussed to achieve this with BPF_SOCK_OPS in [0], and using
tracepoint is thought to be a better solution.
[0]
https://lore.kernel.org/all/20240417124622.35333-1-lulie@linux.alibaba.com/
Signed-off-by: Philo Lu <lulie@linux.alibaba.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- qca: set power_ctrl_enabled on NULL returned by gpiod_get_optional()
- hci_sync: Using hci_cmd_sync_submit when removing Adv Monitor
- qca: fix invalid device address check
- hci_sync: Use advertised PHYs on hci_le_ext_create_conn_sync
- Fix type of len in {l2cap,sco}_sock_getsockopt_old()
- btusb: mediatek: Fix double free of skb in coredump
- btusb: Add Realtek RTL8852BE support ID 0x0bda:0x4853
- btusb: Fix triggering coredump implementation for QCA
-----BEGIN PGP SIGNATURE-----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=t+Dp
-----END PGP SIGNATURE-----
Merge tag 'for-net-2024-04-24' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- qca: set power_ctrl_enabled on NULL returned by gpiod_get_optional()
- hci_sync: Using hci_cmd_sync_submit when removing Adv Monitor
- qca: fix invalid device address check
- hci_sync: Use advertised PHYs on hci_le_ext_create_conn_sync
- Fix type of len in {l2cap,sco}_sock_getsockopt_old()
- btusb: mediatek: Fix double free of skb in coredump
- btusb: Add Realtek RTL8852BE support ID 0x0bda:0x4853
- btusb: Fix triggering coredump implementation for QCA
* tag 'for-net-2024-04-24' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: qca: set power_ctrl_enabled on NULL returned by gpiod_get_optional()
Bluetooth: hci_sync: Using hci_cmd_sync_submit when removing Adv Monitor
Bluetooth: qca: fix NULL-deref on non-serdev setup
Bluetooth: qca: fix NULL-deref on non-serdev suspend
Bluetooth: btusb: mediatek: Fix double free of skb in coredump
Bluetooth: MGMT: Fix failing to MGMT_OP_ADD_UUID/MGMT_OP_REMOVE_UUID
Bluetooth: qca: fix invalid device address check
Bluetooth: hci_event: Fix sending HCI_OP_READ_ENC_KEY_SIZE
Bluetooth: btusb: Fix triggering coredump implementation for QCA
Bluetooth: btusb: Add Realtek RTL8852BE support ID 0x0bda:0x4853
Bluetooth: hci_sync: Use advertised PHYs on hci_le_ext_create_conn_sync
Bluetooth: Fix type of len in {l2cap,sco}_sock_getsockopt_old()
====================
Link: https://lore.kernel.org/r/20240424204102.2319483-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
ice: Support 5 layer Tx scheduler topology
Mateusz Polchlopek says:
For performance reasons there is a need to have support for selectable
Tx scheduler topology. Currently firmware supports only the default
9-layer and 5-layer topology. This patch series enables switch from
default to 5-layer topology, if user decides to opt-in.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ice: Document tx_scheduling_layers parameter
ice: Add tx_scheduling_layers devlink param
ice: Enable switching default Tx scheduler topology
ice: Adjust the VSI/Aggregator layers
ice: Support 5 layer topology
devlink: extend devlink_param *set pointer
====================
Link: https://lore.kernel.org/r/20240422203913.225151-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since kfree_rcu, which is called in the hlist_for_each_entry_rcu traversal
of ovs_ct_limit_exit, is not part of the RCU read critical section, it
is possible that the RCU grace period will pass during the traversal and
the key will be free.
To prevent this, it should be changed to hlist_for_each_entry_safe.
Fixes: 11efd5cb04 ("openvswitch: Support conntrack zone limit")
Signed-off-by: Hyunwoo Kim <v4bel@theori.io>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Link: https://lore.kernel.org/r/ZiYvzQN/Ry5oeFQW@v4bel-B760M-AORUS-ELITE-AX
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
dev_get_by_name will provide a reference on the netdev. So ensure that
the reference of netdev is released after completed.
Fixes: 2540088b83 ("net: openvswitch: Check vport netdev name")
Signed-off-by: Jun Gu <jun.gu@easystack.cn>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Link: https://lore.kernel.org/r/20240423073751.52706-1-jun.gu@easystack.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It was observed in the wild that pairs of consecutive packets would leave
the IPVS with the same wrong checksum, and the issue only went away when
disabling GSO.
IPVS needs to avoid computing the SCTP checksum when using GSO.
Fixes: 90017accff ("sctp: Add GSO support")
Co-developed-by: Firo Yang <firo.yang@suse.com>
Signed-off-by: Ismael Luceno <iluceno@suse.de>
Tested-by: Andreas Taschner <andreas.taschner@suse.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Since the d883a4669a be introduced in v6.4, bluetooth daemon
got the following failed message of MGMT_OP_REMOVE_ADV_MONITOR
command when controller is power-off:
bluetoothd[20976]:
src/adapter.c:reset_adv_monitors_complete() Failed to reset Adv
Monitors: Failed>
Normally this situation is happened when the bluetoothd deamon
be started manually after system booting. Which means that
bluetoothd received MGMT_EV_INDEX_ADDED event after kernel
runs hci_power_off().
Base on doc/mgmt-api.txt, the MGMT_OP_REMOVE_ADV_MONITOR command
can be used when the controller is not powered. This patch changes
the code in remove_adv_monitor() to use hci_cmd_sync_submit()
instead of hci_cmd_sync_queue().
Fixes: d883a4669a ("Bluetooth: hci_sync: Only allow hci_cmd_sync_queue if running")
Cc: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Cc: Manish Mandlik <mmandlik@google.com>
Cc: Archie Pusaka <apusaka@chromium.org>
Cc: Miao-chen Chou <mcchou@chromium.org>
Signed-off-by: Chun-Yi Lee <jlee@suse.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
These commands don't require the adapter to be up and running so don't
use hci_cmd_sync_queue which would check that flag, instead use
hci_cmd_sync_submit which would ensure mgmt_class_complete is set
properly regardless if any command was actually run or not.
Link: https://github.com/bluez/bluez/issues/809
Fixes: d883a4669a ("Bluetooth: hci_sync: Only allow hci_cmd_sync_queue if running")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The code shall always check if HCI_QUIRK_BROKEN_READ_ENC_KEY_SIZE has
been set before attempting to use HCI_OP_READ_ENC_KEY_SIZE.
Fixes: c569242cd4 ("Bluetooth: hci_event: set the conn encrypted before conn establishes")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The extended advertising reports do report the PHYs so this store then
in hci_conn so it can be later used in hci_le_ext_create_conn_sync to
narrow the PHYs to be scanned since the controller will also perform a
scan having a smaller set of PHYs shall reduce the time it takes to
find and connect peers.
Fixes: 288c90224e ("Bluetooth: Enable all supported LE PHY by default")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
After an innocuous optimization change in LLVM main (19.0.0), x86_64
allmodconfig (which enables CONFIG_KCSAN / -fsanitize=thread) fails to
build due to the checks in check_copy_size():
In file included from net/bluetooth/sco.c:27:
In file included from include/linux/module.h:13:
In file included from include/linux/stat.h:19:
In file included from include/linux/time.h:60:
In file included from include/linux/time32.h:13:
In file included from include/linux/timex.h:67:
In file included from arch/x86/include/asm/timex.h:6:
In file included from arch/x86/include/asm/tsc.h:10:
In file included from arch/x86/include/asm/msr.h:15:
In file included from include/linux/percpu.h:7:
In file included from include/linux/smp.h:118:
include/linux/thread_info.h:244:4: error: call to '__bad_copy_from'
declared with 'error' attribute: copy source size is too small
244 | __bad_copy_from();
| ^
The same exact error occurs in l2cap_sock.c. The copy_to_user()
statements that are failing come from l2cap_sock_getsockopt_old() and
sco_sock_getsockopt_old(). This does not occur with GCC with or without
KCSAN or Clang without KCSAN enabled.
len is defined as an 'int' because it is assigned from
'__user int *optlen'. However, it is clamped against the result of
sizeof(), which has a type of 'size_t' ('unsigned long' for 64-bit
platforms). This is done with min_t() because min() requires compatible
types, which results in both len and the result of sizeof() being casted
to 'unsigned int', meaning len changes signs and the result of sizeof()
is truncated. From there, len is passed to copy_to_user(), which has a
third parameter type of 'unsigned long', so it is widened and changes
signs again. This excessive casting in combination with the KCSAN
instrumentation causes LLVM to fail to eliminate the __bad_copy_from()
call, failing the build.
The official recommendation from LLVM developers is to consistently use
long types for all size variables to avoid the unnecessary casting in
the first place. Change the type of len to size_t in both
l2cap_sock_getsockopt_old() and sco_sock_getsockopt_old(). This clears
up the error while allowing min_t() to be replaced with min(), resulting
in simpler code with no casts and fewer implicit conversions. While len
is a different type than optlen now, it should result in no functional
change because the result of sizeof() will clamp all values of optlen in
the same manner as before.
Cc: stable@vger.kernel.org
Closes: https://github.com/ClangBuiltLinux/linux/issues/2007
Link: https://github.com/llvm/llvm-project/issues/85647
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
There are several functions taking pointers to data they don't modify.
This includes statistics fetching, page and page_pool parameters, etc.
Constify the pointers, so that call sites will be able to pass const
pointers as well.
No functional changes, no visible changes in functions sizes.
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
It is impossible to use init_dummy_netdev together with alloc_netdev()
as the 'setup' argument.
This is because alloc_netdev() initializes some fields in the net_device
structure, and later init_dummy_netdev() memzero them all. This causes
some problems as reported here:
https://lore.kernel.org/all/20240322082336.49f110cc@kernel.org/
Split the init_dummy_netdev() function in two. Create a new function called
init_dummy_netdev_core() that does not memzero the net_device structure.
Then have init_dummy_netdev() memzero-ing and calling
init_dummy_netdev_core(), keeping the old behaviour.
init_dummy_netdev_core() is the new function that could be called as an
argument for alloc_netdev().
Also, create a helper to allocate and initialize dummy net devices,
leveraging init_dummy_netdev_core() as the setup argument. This function
basically simplify the allocation of dummy devices, by allocating and
initializing it. Freeing the device continue to be done through
free_netdev()
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For dummy devices, exit earlier at free_netdev() instead of executing
the whole function. This is necessary, because dummy devices are
special, and shouldn't have the second part of the function executed.
Otherwise reg_state, which is NETREG_DUMMY, will be overwritten and
there will be no way to identify that this is a dummy device. Also, this
device do not need the final put_device(), since dummy devices are not
registered (through register_netdevice()), where the device reference is
increased (at netdev_register_kobject()/device_add()).
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix bad grammar in description of init_dummy_netdev() function. This
topic showed up in the review of the "allocate dummy device dynamically"
patch set.
Suggested-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The permissions callback should not modify the ctl_table. Enforce this
expectation via the typesystem. This is a step to put "struct ctl_table"
into .rodata throughout the kernel.
The patch was created with the following coccinelle script:
@@
identifier func, head, ctl;
@@
int func(
struct ctl_table_header *head,
- struct ctl_table *ctl)
+ const struct ctl_table *ctl)
{ ... }
(insert_entry() from fs/proc/proc_sysctl.c is a false-positive)
No additional occurrences of '.permissions =' were found after a
tree-wide search for places missed by the conccinelle script.
Reviewed-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Joel Granados <j.granados@samsung.com>
Remove the 'table' argument from set_ownership as it is never used. This
change is a step towards putting "struct ctl_table" into .rodata and
eventually having sysctl core only use "const struct ctl_table".
The patch was created with the following coccinelle script:
@@
identifier func, head, table, uid, gid;
@@
void func(
struct ctl_table_header *head,
- struct ctl_table *table,
kuid_t *uid, kgid_t *gid)
{ ... }
No additional occurrences of 'set_ownership' were found after doing a
tree-wide search.
Reviewed-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Joel Granados <j.granados@samsung.com>
Since call_rcu, which is called in the hlist_for_each_entry_rcu traversal
of tcp_ao_connect_init, is not part of the RCU read critical section, it
is possible that the RCU grace period will pass during the traversal and
the key will be free.
To prevent this, it should be changed to hlist_for_each_entry_safe.
Fixes: 7c2ffaf21b ("net/tcp: Calculate TCP-AO traffic keys")
Signed-off-by: Hyunwoo Kim <v4bel@theori.io>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://lore.kernel.org/r/ZiYu9NJ/ClR8uSkH@v4bel-B760M-AORUS-ELITE-AX
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If we no longer hold RTNL, we must use netdev_master_upper_dev_get_rcu()
instead of netdev_master_upper_dev_get().
Fixes: ba0f780694 ("neighbour: no longer hold RTNL in neigh_dump_info()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240421185753.1808077-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Note that when this commit message refers to netlink dump
it only means the actual dumping part, the parsing / dump
start is handled by the same code as "doit".
Commit 4a19edb60d ("netlink: Pass extack to dump handlers")
added support for returning extack messages from dump handlers,
but left out other extack info, e.g. bad attribute.
This used to be fine because until YNL we had little practical
use for the machine readable attributes, and only messages were
used in practice.
YNL flips the preference 180 degrees, it's now much more useful
to point to a bad attr with NL_SET_BAD_ATTR() than type
an English message saying "attribute XYZ is $reason-why-bad".
Support all of extack. The fact that extack only gets added if
it fits remains unaddressed.
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240420023543.3300306-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Having to filter the right ifindex in the tests is a bit tedious.
Add support for dumping qstats for a single ifindex.
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240420023543.3300306-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
syzbot reported use-after-free in unix_del_edges(). [0]
What the repro does is basically repeat the following quickly.
1. pass a fd of an AF_UNIX socket to itself
socketpair(AF_UNIX, SOCK_DGRAM, 0, [3, 4]) = 0
sendmsg(3, {..., msg_control=[{cmsg_len=20, cmsg_level=SOL_SOCKET,
cmsg_type=SCM_RIGHTS, cmsg_data=[4]}], ...}, 0) = 0
2. pass other fds of AF_UNIX sockets to the socket above
socketpair(AF_UNIX, SOCK_SEQPACKET, 0, [5, 6]) = 0
sendmsg(3, {..., msg_control=[{cmsg_len=48, cmsg_level=SOL_SOCKET,
cmsg_type=SCM_RIGHTS, cmsg_data=[5, 6]}], ...}, 0) = 0
3. close all sockets
Here, two skb are created, and every unix_edge->successor is the first
socket. Then, __unix_gc() will garbage-collect the two skb:
(a) free skb with self-referencing fd
(b) free skb holding other sockets
After (a), the self-referencing socket will be scheduled to be freed
later by the delayed_fput() task.
syzbot repeated the sequences above (1. ~ 3.) quickly and triggered
the task concurrently while GC was running.
So, at (b), the socket was already freed, and accessing it was illegal.
unix_del_edges() accesses the receiver socket as edge->successor to
optimise GC. However, we should not do it during GC.
Garbage-collecting sockets does not change the shape of the rest
of the graph, so we need not call unix_update_graph() to update
unix_graph_grouped when we purge skb.
However, if we clean up all loops in the unix_walk_scc_fast() path,
unix_graph_maybe_cyclic remains unchanged (true), and __unix_gc()
will call unix_walk_scc_fast() continuously even though there is no
socket to garbage-collect.
To keep that optimisation while fixing UAF, let's add the same
updating logic of unix_graph_maybe_cyclic in unix_walk_scc_fast()
as done in unix_walk_scc() and __unix_walk_scc().
Note that when unix_del_edges() is called from other places, the
receiver socket is always alive:
- sendmsg: the successor's sk_refcnt is bumped by sock_hold()
unix_find_other() for SOCK_DGRAM, connect() for SOCK_STREAM
- recvmsg: the successor is the receiver, and its fd is alive
[0]:
BUG: KASAN: slab-use-after-free in unix_edge_successor net/unix/garbage.c:109 [inline]
BUG: KASAN: slab-use-after-free in unix_del_edge net/unix/garbage.c:165 [inline]
BUG: KASAN: slab-use-after-free in unix_del_edges+0x148/0x630 net/unix/garbage.c:237
Read of size 8 at addr ffff888079c6e640 by task kworker/u8:6/1099
CPU: 0 PID: 1099 Comm: kworker/u8:6 Not tainted 6.9.0-rc4-next-20240418-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024
Workqueue: events_unbound __unix_gc
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114
print_address_description mm/kasan/report.c:377 [inline]
print_report+0x169/0x550 mm/kasan/report.c:488
kasan_report+0x143/0x180 mm/kasan/report.c:601
unix_edge_successor net/unix/garbage.c:109 [inline]
unix_del_edge net/unix/garbage.c:165 [inline]
unix_del_edges+0x148/0x630 net/unix/garbage.c:237
unix_destroy_fpl+0x59/0x210 net/unix/garbage.c:298
unix_detach_fds net/unix/af_unix.c:1811 [inline]
unix_destruct_scm+0x13e/0x210 net/unix/af_unix.c:1826
skb_release_head_state+0x100/0x250 net/core/skbuff.c:1127
skb_release_all net/core/skbuff.c:1138 [inline]
__kfree_skb net/core/skbuff.c:1154 [inline]
kfree_skb_reason+0x16d/0x3b0 net/core/skbuff.c:1190
__skb_queue_purge_reason include/linux/skbuff.h:3251 [inline]
__skb_queue_purge include/linux/skbuff.h:3256 [inline]
__unix_gc+0x1732/0x1830 net/unix/garbage.c:575
process_one_work kernel/workqueue.c:3218 [inline]
process_scheduled_works+0xa2c/0x1830 kernel/workqueue.c:3299
worker_thread+0x86d/0xd70 kernel/workqueue.c:3380
kthread+0x2f0/0x390 kernel/kthread.c:389
ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK>
Allocated by task 14427:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3f/0x80 mm/kasan/common.c:68
unpoison_slab_object mm/kasan/common.c:312 [inline]
__kasan_slab_alloc+0x66/0x80 mm/kasan/common.c:338
kasan_slab_alloc include/linux/kasan.h:201 [inline]
slab_post_alloc_hook mm/slub.c:3897 [inline]
slab_alloc_node mm/slub.c:3957 [inline]
kmem_cache_alloc_noprof+0x135/0x290 mm/slub.c:3964
sk_prot_alloc+0x58/0x210 net/core/sock.c:2074
sk_alloc+0x38/0x370 net/core/sock.c:2133
unix_create1+0xb4/0x770
unix_create+0x14e/0x200 net/unix/af_unix.c:1034
__sock_create+0x490/0x920 net/socket.c:1571
sock_create net/socket.c:1622 [inline]
__sys_socketpair+0x33e/0x720 net/socket.c:1773
__do_sys_socketpair net/socket.c:1822 [inline]
__se_sys_socketpair net/socket.c:1819 [inline]
__x64_sys_socketpair+0x9b/0xb0 net/socket.c:1819
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 1805:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3f/0x80 mm/kasan/common.c:68
kasan_save_free_info+0x40/0x50 mm/kasan/generic.c:579
poison_slab_object+0xe0/0x150 mm/kasan/common.c:240
__kasan_slab_free+0x37/0x60 mm/kasan/common.c:256
kasan_slab_free include/linux/kasan.h:184 [inline]
slab_free_hook mm/slub.c:2190 [inline]
slab_free mm/slub.c:4393 [inline]
kmem_cache_free+0x145/0x340 mm/slub.c:4468
sk_prot_free net/core/sock.c:2114 [inline]
__sk_destruct+0x467/0x5f0 net/core/sock.c:2208
sock_put include/net/sock.h:1948 [inline]
unix_release_sock+0xa8b/0xd20 net/unix/af_unix.c:665
unix_release+0x91/0xc0 net/unix/af_unix.c:1049
__sock_release net/socket.c:659 [inline]
sock_close+0xbc/0x240 net/socket.c:1421
__fput+0x406/0x8b0 fs/file_table.c:422
delayed_fput+0x59/0x80 fs/file_table.c:445
process_one_work kernel/workqueue.c:3218 [inline]
process_scheduled_works+0xa2c/0x1830 kernel/workqueue.c:3299
worker_thread+0x86d/0xd70 kernel/workqueue.c:3380
kthread+0x2f0/0x390 kernel/kthread.c:389
ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
The buggy address belongs to the object at ffff888079c6e000
which belongs to the cache UNIX of size 1920
The buggy address is located 1600 bytes inside of
freed 1920-byte region [ffff888079c6e000, ffff888079c6e780)
Reported-by: syzbot+f3f3eef1d2100200e593@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=f3f3eef1d2100200e593
Fixes: 77e5593aeb ("af_unix: Skip GC if no cycle exists.")
Fixes: fd86344823 ("af_unix: Try not to hold unix_gc_lock during accept().")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20240419235102.31707-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Merge net changes required for the upcoming send zerocopy improvements.
* 'for-uring-ubufops' of git://git.kernel.org/pub/scm/linux/kernel/git/kuba/linux:
net: add callback for setting a ubuf_info to skb
net: extend ubuf_info callback to ops structure
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Ensure that the provided netdev name is not one of its aliases to
prevent unnecessary creation and destruction of the vport by
ovs-vswitchd.
Signed-off-by: Jun Gu <jun.gu@easystack.cn>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Link: https://lore.kernel.org/r/20240419061425.132723-1-jun.gu@easystack.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The NLM_F_ACK flag is ignored for nfnetlink batch begin and end
messages. This is a problem for ynl which wants to receive an ack for
every message it sends, not just the commands in between the begin/end
messages.
Add processing for ACKs for begin/end messages and provide responses
when requested.
I have checked that iproute2, pyroute2 and systemd are unaffected by
this change since none of them use NLM_F_ACK for batch begin/end.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240418104737.77914-5-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pavel Begunkov says:
====================
implement io_uring notification (ubuf_info) stacking (net part)
To have per request buffer notifications each zerocopy io_uring send
request allocates a new ubuf_info. However, as an skb can carry only
one uarg, it may force the stack to create many small skbs hurting
performance in many ways.
The patchset implements notification, i.e. an io_uring's ubuf_info
extension, stacking. It attempts to link ubuf_info's into a list,
allowing to have multiple of them per skb.
liburing/examples/send-zerocopy shows up 6 times performance improvement
for TCP with 4KB bytes per send, and levels it with MSG_ZEROCOPY. Without
the patchset it requires much larger sends to utilise all potential.
bytes | before | after (Kqps)
1200 | 195 | 1023
4000 | 193 | 1386
8000 | 154 | 1058
====================
Link: https://lore.kernel.org/all/cover.1713369317.git.asml.silence@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
At the moment an skb can only have one ubuf_info associated with it,
which might be a performance problem for zerocopy sends in cases like
TCP via io_uring. Add a callback for assigning ubuf_info to skb, this
way we will implement smarter assignment later like linking ubuf_info
together.
Note, it's an optional callback, which should be compatible with
skb_zcopy_set(), that's because the net stack might potentially decide
to clone an skb and take another reference to ubuf_info whenever it
wishes. Also, a correct implementation should always be able to bind to
an skb without prior ubuf_info, otherwise we could end up in a situation
when the send would not be able to progress.
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/all/b7918aadffeb787c84c9e72e34c729dc04f3a45d.1713369317.git.asml.silence@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We'll need to associate additional callbacks with ubuf_info, introduce
a structure holding ubuf_info callbacks. Apart from a more smarter
io_uring notification management introduced in next patches, it can be
used to generalise msg_zerocopy_put_abort() and also store
->sg_from_iter, which is currently passed in struct msghdr.
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/all/a62015541de49c0e2a8a0377a1d5d0a5aeb07016.1713369317.git.asml.silence@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While investigating TCP performance, I found that TCP would
sometimes send big skbs followed by a single MSS skb,
in a 'locked' pattern.
For instance, BIG TCP is enabled, MSS is set to have 4096 bytes
of payload per segment. gso_max_size is set to 181000.
This means that an optimal TCP packet size should contain
44 * 4096 = 180224 bytes of payload,
However, I was seeing packets sizes interleaved in this pattern:
172032, 8192, 172032, 8192, 172032, 8192, <repeat>
tcp_tso_should_defer() heuristic is defeated, because after a split of
a packet in write queue for whatever reason (this might be a too small
CWND or a small enough pacing_rate),
the leftover packet in the queue is smaller than the optimal size.
It is time to try to make 'leftover packets' bigger so that
tcp_tso_should_defer() can give its full potential.
After this patch, we can see the following output:
14:13:34.009273 IP6 sender > receiver: Flags [P.], seq 4048380:4098360, ack 1, win 256, options [nop,nop,TS val 3425678144 ecr 1561784500], length 49980
14:13:34.010272 IP6 sender > receiver: Flags [P.], seq 4098360:4148340, ack 1, win 256, options [nop,nop,TS val 3425678145 ecr 1561784501], length 49980
14:13:34.011271 IP6 sender > receiver: Flags [P.], seq 4148340:4198320, ack 1, win 256, options [nop,nop,TS val 3425678146 ecr 1561784502], length 49980
14:13:34.012271 IP6 sender > receiver: Flags [P.], seq 4198320:4248300, ack 1, win 256, options [nop,nop,TS val 3425678147 ecr 1561784503], length 49980
14:13:34.013272 IP6 sender > receiver: Flags [P.], seq 4248300:4298280, ack 1, win 256, options [nop,nop,TS val 3425678148 ecr 1561784504], length 49980
14:13:34.014271 IP6 sender > receiver: Flags [P.], seq 4298280:4348260, ack 1, win 256, options [nop,nop,TS val 3425678149 ecr 1561784505], length 49980
14:13:34.015272 IP6 sender > receiver: Flags [P.], seq 4348260:4398240, ack 1, win 256, options [nop,nop,TS val 3425678150 ecr 1561784506], length 49980
14:13:34.016270 IP6 sender > receiver: Flags [P.], seq 4398240:4448220, ack 1, win 256, options [nop,nop,TS val 3425678151 ecr 1561784507], length 49980
14:13:34.017269 IP6 sender > receiver: Flags [P.], seq 4448220:4498200, ack 1, win 256, options [nop,nop,TS val 3425678152 ecr 1561784508], length 49980
14:13:34.018276 IP6 sender > receiver: Flags [P.], seq 4498200:4548180, ack 1, win 256, options [nop,nop,TS val 3425678153 ecr 1561784509], length 49980
14:13:34.019259 IP6 sender > receiver: Flags [P.], seq 4548180:4598160, ack 1, win 256, options [nop,nop,TS val 3425678154 ecr 1561784510], length 49980
With 200 concurrent flows on a 100Gbit NIC, we can see a reduction
of TSO packets (and ACK packets) of about 30 %.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240418214600.1291486-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tcp_write_xmit() calls tcp_init_tso_segs()
to set gso_size and gso_segs on the packet.
tcp_init_tso_segs() requires the stack to maintain
an up to date tcp_skb_pcount(), and this makes sense
for packets in rtx queue. Not so much for packets
still in the write queue.
In the following patch, we don't want to deal with
tcp_skb_pcount() when moving payload from 2nd
skb to 1st skb in the write queue.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240418214600.1291486-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tcp_cwnd_test() has a special handing for the last packet in
the write queue if it is smaller than one MSS and has the FIN flag.
This is in violation of TCP RFC, and seems quite dubious.
This packet can be sent only if the current CWND is bigger
than the number of packets in flight.
Making tcp_cwnd_test() result independent of the first skb
in the write queue is needed for the last patch of the series.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240418214600.1291486-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extend devlink_param *set function pointer to take extack as a param.
Sometimes it is needed to pass information to the end user from set
function. It is more proper to use for that netlink instead of passing
message to dmesg.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
When redirecting a packet using XDP, the bpf_redirect_map() helper will set
up the redirect destination information in struct bpf_redirect_info (using
the __bpf_xdp_redirect_map() helper function), and the xdp_do_redirect()
function will read this information after the XDP program returns and pass
the frame on to the right redirect destination.
When using the BPF_F_BROADCAST flag to do multicast redirect to a whole
map, __bpf_xdp_redirect_map() sets the 'map' pointer in struct
bpf_redirect_info to point to the destination map to be broadcast. And
xdp_do_redirect() reacts to the value of this map pointer to decide whether
it's dealing with a broadcast or a single-value redirect. However, if the
destination map is being destroyed before xdp_do_redirect() is called, the
map pointer will be cleared out (by bpf_clear_redirect_map()) without
waiting for any XDP programs to stop running. This causes xdp_do_redirect()
to think that the redirect was to a single target, but the target pointer
is also NULL (since broadcast redirects don't have a single target), so
this causes a crash when a NULL pointer is passed to dev_map_enqueue().
To fix this, change xdp_do_redirect() to react directly to the presence of
the BPF_F_BROADCAST flag in the 'flags' value in struct bpf_redirect_info
to disambiguate between a single-target and a broadcast redirect. And only
read the 'map' pointer if the broadcast flag is set, aborting if that has
been cleared out in the meantime. This prevents the crash, while keeping
the atomic (cmpxchg-based) clearing of the map pointer itself, and without
adding any more checks in the non-broadcast fast path.
Fixes: e624d4ed4a ("xdp: Extend xdp_redirect_map with broadcast support")
Reported-and-tested-by: syzbot+af9492708df9797198d6@syzkaller.appspotmail.com
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://lore.kernel.org/r/20240418071840.156411-1-toke@redhat.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
br_info_notify is a void function. There is no need to return.
Fixes: b6d0425b81 ("bridge: cfm: Netlink Notifications.")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
After commit 1eeb504357 ("tcp/dccp: do not care about
families in inet_twsk_purge()") tcp_twsk_purge() is
no longer potentially called from a module.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
First problem is a double call to __in_dev_get_rcu(), because
the second one could return NULL.
if (__in_dev_get_rcu(dev) && __in_dev_get_rcu(dev)->ifa_list)
Second problem is a read from dev->ip6_ptr with no NULL check:
if (!list_empty(&rcu_dereference(dev->ip6_ptr)->addr_list))
Use the correct RCU API to fix these.
v2: add missing include <net/addrconf.h>
Fixes: d329ea5bd8 ("icmp: add response to RFC 8335 PROBE messages")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Andreas Roeseler <andreas.a.roeseler@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
To be able to constify instances of struct ctl_tables it is necessary to
remove ways through which non-const versions are exposed from the
sysctl core.
One of these is the ctl_table_arg member of struct ctl_table_header.
Constify this reference as a prerequisite for the full constification of
struct ctl_table instances.
No functional change.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Performance regression reported with NFS/RDMA using Omnipath,
bisected to commit e084ee673c ("svcrdma: Add Write chunk WRs to
the RPC's Send WR chain").
Tracing on the server reports:
nfsd-7771 [060] 1758.891809: svcrdma_sq_post_err:
cq.id=205 cid=226 sc_sq_avail=13643/851 status=-12
sq_post_err reports ENOMEM, and the rdma->sc_sq_avail (13643) is
larger than rdma->sc_sq_depth (851). The number of available Send
Queue entries is always supposed to be smaller than the Send Queue
depth. That seems like a Send Queue accounting bug in svcrdma.
As it's getting to be late in the 6.9-rc cycle, revert this commit.
It can be revisited in a subsequent kernel release.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218743
Fixes: e084ee673c ("svcrdma: Add Write chunk WRs to the RPC's Send WR chain")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
If "udp_cmsg_send()" returned 0 (i.e. only UDP cmsg),
"connected" should not be set to 0. Otherwise it stops
the connected socket from using the cached route.
Fixes: 2e8de85763 ("udp: add gso segment cmsg")
Signed-off-by: Yick Xie <yick.xie@gmail.com>
Cc: stable@vger.kernel.org
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240418170610.867084-1-yick.xie@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
neigh_dump_table() is already relying on RCU protection.
pneigh_dump_table() is using its own protection (tbl->lock)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Change neigh_dump_table() and pneigh_dump_table()
to either return 0 or -EMSGSIZE if not enough
space was available in the skb.
Then neigh_dump_info() can do the same.
This allows NLMSG_DONE to be appended to the current
skb at the end of a dump, saving a couple of recvmsg()
system calls.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In order to remove RTNL protection from neightbl_dump_info()
and neigh_dump_info() later, we need to add
RCU protection to neigh_tables[].
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is the last member in struct rps_dev_flow which should be
protected locklessly. So finish it.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As we can see, rflow->filter can be written/read concurrently, so
lockless access is needed.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Removing one unnecessary reader protection and add another writer
protection to finish the locklessly proctection job.
Note: the removed READ_ONCE() is not needed because we only have to protect
the locklessly reader in the different context (rps_may_expire_flow()).
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of relying on RTNL, skbprio_dump() can use READ_ONCE()
annotation, paired with WRITE_ONCE() one in skbprio_change().
Also add a READ_ONCE(sch->limit) in skbprio_enqueue().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of relying on RTNL, pie_dump() can use READ_ONCE()
annotations, paired with WRITE_ONCE() ones in pie_change().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of relying on RTNL, hhf_dump() can use READ_ONCE()
annotations, paired with WRITE_ONCE() ones in hhf_change().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of relying on RTNL, hfsc_dump_qdisc() can use READ_ONCE()
annotation, paired with WRITE_ONCE() one in hfsc_change_qdisc().
Use READ_ONCE(q->defcls) in hfsc_classify() to
no longer acquire qdisc lock from hfsc_change_qdisc().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of relying on RTNL, fq_pie_dump() can use READ_ONCE()
annotations, paired with WRITE_ONCE() ones in fq_pie_change().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of relying on RTNL, fq_codel_dump() can use READ_ONCE()
annotations, paired with WRITE_ONCE() ones in fq_codel_change().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of relying on RTNL, __fifo_dump() can use READ_ONCE()
annotations, paired with WRITE_ONCE() ones in __fifo_init().
Also add missing READ_ONCE(sh->limit) in bfifo_enqueue(),
pfifo_enqueue() and pfifo_tail_enqueue().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of relying on RTNL, ets_dump() can use READ_ONCE()
annotations, paired with WRITE_ONCE() ones in ets_change().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of relying on RTNL, codel_dump() can use READ_ONCE()
annotations.
There is no etf_change() yet, this patch imply aligns
this qdisc with others.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of relying on RTNL, codel_dump() can use READ_ONCE()
annotations, paired with WRITE_ONCE() ones in codel_change().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of relying on RTNL, choke_dump() can use READ_ONCE()
annotations, paired with WRITE_ONCE() ones in choke_change().
v2: added a WRITE_ONCE(p->Scell_log, Scell_log)
per Simon feedback in V1
Removed the READ_ONCE(q->limit) in choke_enqueue()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of relying on RTNL, cbs_dump() can use READ_ONCE()
annotations, paired with WRITE_ONCE() ones in cbs_change().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of relying on RTNL, cake_dump() can use READ_ONCE()
annotations, paired with WRITE_ONCE() ones in cake_change().
v2: addressed Simon feedback in V1: https://lore.kernel.org/netdev/20240417083549.GA3846178@kernel.org/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Toke Høiland-Jørgensen <toke@toke.dk>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of relying on RTNL, fq_dump() can use READ_ONCE()
annotations, paired with WRITE_ONCE() in fq_change()
v2: Addressed Simon feedback in V1: https://lore.kernel.org/netdev/20240416181915.GT2320920@kernel.org/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
During non-STA management Tx, when source address is same as one of the
link addresses and even when userspace requested Tx on a specific link,
the link ID is not set in the TX control information. Now if the MLD
address is also the same as that of the link address, then mac80211
fills link as "unspecified", since it looks like MLD TX.
This is unexpected, however, since non-STA TX must specify which link
to use. In hwsim, this will (after warnings) result in dropping such
frames as well.
Use and set the link id if the link bss is matching the address and
requested channel.
Signed-off-by: Sriram R <quic_srirrama@quicinc.com>
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://msgid.link/20240410052705.169865-1-quic_adisi@quicinc.com
Link: https://lore.kernel.org/r/0496fb7e-53cc-476f-8052-985d82fd8d01@quicinc.com
[reword commit message, should spell out hwsim etc.]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently whenever link AP beacon is assigned, sdata->u.ap.active flag is
set and whenever it is brought down, the flag is reset. However, with MLO,
all the links of the same MLD would use the same sdata. Hence there is no
need to set/reset for each link up/down. Also, resetting it when only one
of the links went down is not desirable.
Add changes to set the active flag only when first link is assigned
beacon. Similarly, add changes to reset that flag only when last link is
brought down.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://msgid.link/20240409094017.3165560-1-quic_adisi@quicinc.com
[remove unnecessary check before constant true assignment]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The return value of regulatory_hint_indoor() is always 0 for
success, and the return value of regulatory_hint_found_beacon()
is always ignored. Make them both have void return.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Use the Return: annotation instead of spelling out "Returns" in
the documentation, for both sta_info_flush()/__sta_info_flush().
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In the unlikely event that link_use_channel fails while activating a
link, mac80211 would go into a bad state. Unfortunately, we cannot
completely avoid failures from drivers in this case.
However, what we can do is to just continue internally anyway and assume
the driver is going to trigger a recovery flow from its side. Doing that
means that we at least have a consistent state in mac80211 allowing such
a recovery flow to succeed.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240418115219.1129e89f4b55.I6299678353e50e88b55c99b0bce15c64b52c2804@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There's no need for a label/goto here, the only thing is
that drv_assign_vif_chanctx() must succeed to set 'conf'
and add the new context to the list, the remaining code
is (and must be) the same regardless.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240418115219.a94852030d33.I9d647178ab25636372ed79e5312c68a06e0bf60c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When searching for a chanctx for re-use, it's later adjusted and
assigned. It may also be that another one is already assigned to
the link in question, so unassign can also happen. In short, the
driver is called multiple times. During these callbacks, it may
thus change active links (on another interface), which then can
in turn cause the found chanctx (that's going to be reused) to
get removed and freed.
To avoid this, temporarily assign it to the reserved chanctx and
track the link that wants to use it in the reserved_links list.
This causes the ieee80211_chanctx_refcount() to be increased by
one during these operations, thus avoiding the free.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240418115219.94ea84c8ee1e.I0b247dbc0cd937ae6367bc0fc7e8d156b5d5f9b1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If a link switch work was queued, and then a restart happened, the
worker might be executed before the reconfig, and obviously it will fail
(the HW might not respond to updates etc.)
So, don't perform the switch if we are in reconfig, instead - do it
at the end of the reconfig.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240415112355.1ef1008e3a0a.I19add3f2152dcfd55a759de97b1d09265c1cde98@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There's an issue in that when we disconnect from an AP
due to the AP switching to an unsupported channel, we
might not tell the driver about this before we try to
send the deauth. If the underlying implementation has
detected the quiet CSA, this may cause issues if this
is the only active link. Avoid this by transmitting
(and flushing) the deauth only when there's an active
link available that's not affected by quiet CSA.
Since this introduces link->u.mgd.csa_blocked_tx and we
no longer check sdata->csa_blocked_tx for the TX itself
also rename the latter to csa_blocked_queues.
Fixes: 6f0107d195 ("wifi: mac80211: introduce a feature flag for quiet in CSA")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240415112355.1d91db5e95aa.Iad3a5df3367f305dff48cd61776abfd6cf0fd4ab@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The AP removal timer field need not be aligned, so the
code shouldn't access it directly, but use unaligned
loads. Use get_unaligned_le16(), which even is shorter
than the current code since it doesn't need a cast.
Fixes: 8eb8dd2ffb ("wifi: mac80211: Support link removal using Reconfiguration ML element")
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240418105220.356788ba0045.I2b3cdb3644e205d5bb10322c345c0499171cf5d2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If the AP removal timer is long, we don't really want to
remove the link immediately. However, we really should do
it _before_ the AP removes it (which happens at or after
count reaches 0), so subtract 1 from the countdown when
scheduling the timer. This causes the link removal work
to run just after the beacon with value 1 is received. If
the counter is already zero, do it immediately.
This fixes an issue where we do the removal too late and
receive a beacon from the AP that's no longer associated
with the MLD, but thus removed EHT and ML elements, and
then we disconnect instead from the whole MLD, since one
of the associated APs changed mode from EHT to HE.
Fixes: 8eb8dd2ffb ("wifi: mac80211: Support link removal using Reconfiguration ML element")
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240418105220.03ac4a09fa74.Ifb8c8d38e3402721a81ce5981568f47b5c5889cb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If the AP mode ends up being determined less than the client mode,
there may be different reasons for this, e.g. AP misconfiguration.
If this happens in a way that causes e.g. EHT to be rejected, the
elements need to be re-parsed since we'll connect as HE, but not
reparsing means that we'll still think it's OK to use multi-link,
so we can connect in a non-sensical configuration of advertising
only HE on a secondary link. This normally won't happen for the
assoc link because that reuses the mode from authentication, and
if that's not EHT, multi-link association is rejected.
Fix this inconsistency by parsing the elements again if the mode
was different from the first parsing attempt. Print the message a
bit later to avoid printing "determined AP ... to be HE" twice in
cases where ieee80211_determine_ap_chan() returned a lesser mode,
rather than the regulatory downgrades below changing it.
Fixes: 310c8387c6 ("wifi: mac80211: clean up connection process")
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240418105220.d1f25d92cfe7.Ia21eff6cdcae2f5aca13cf8e742a986af5e70f89@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When doing re-parsing in ieee80211_determine_chan_mode(),
the conn->mode is changed, and the whole point of doing
the parsing again was to parse as the downgraded mode.
However, that didn't actually work, because the setting
was copied before and never changed again. Fix that.
Fixes: 310c8387c6 ("wifi: mac80211: clean up connection process")
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240418105220.5e0d1fcb5622.Ib0673e0bc90033fd6d387b6a5f107c040eb907cf@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The vif's idle state doesn't automatically go to true when
any link removes the channel context, it's only idle when
_all_ links no longer have a channel context. Fix that.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240418105220.90df97557702.I05d2228ce85c203b9f2d6da8538cc16dce46752a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-----BEGIN PGP SIGNATURE-----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=R1+V
-----END PGP SIGNATURE-----
Merge tag 'nf-24-04-18' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
Patch #1 amends a missing spot where the set iterator type is unset.
This is fixing a issue in the previous pull request.
Patch #2 fixes the delete set command abort path by restoring state
of the elements. Reverse logic for the activate (abort) case
otherwise element state is not restored, this requires to move
the check for active/inactive elements to the set iterator
callback. From the deactivate path, toggle the next generation
bit and from the activate (abort) path, clear the next generation
bitmask.
Patch #3 skips elements already restored by delete set command from the
abort path in case there is a previous delete element command in
the batch. Check for the next generation bit just like it is done
via set iteration to restore maps.
netfilter pull request 24-04-18
* tag 'nf-24-04-18' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: fix memleak in map from abort path
netfilter: nf_tables: restore set elements when delete set fails
netfilter: nf_tables: missing iterator type in lookup walk
====================
Link: https://lore.kernel.org/r/20240418010948.3332346-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Inter-process communication on localhost should be established successfully
even the ARP table is full, many processes on server machine use the
localhost to communicate such as command-line interface (CLI),
servers hope all CLI commands can be executed successfully even the arp
table is full. Right now CLI commands got timeout when the arp table is
full. Set the parameter of exempt_from_gc to be true for LOOPBACK net
device to keep localhost neigh in arp table, not removed by gc.
the steps of reproduced:
server with "gc_thresh3 = 1024" setting, ping server from more than 1024
same netmask Lan IPv4 addresses, run "ssh localhost" on console interface,
then the command will get timeout.
Signed-off-by: Zheng Li <James.Z.Li@Dell.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240416095343.540-1-lizheng043@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
