- Use the printf format string with %s to take a string instead of taking
in a string directly.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZk9YlBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6quTlAQDKX9sRQedTyMbldxgepZjiirDomfPk
aMaZOXicdLJSswEAiNz9HxUd9mMaMb35Sf9wYrBXReO59FyrJCT34Fc6ZwQ=
=PoMI
-----END PGP SIGNATURE-----
Merge tag 'trace-tools-v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing tool fix from Steven Rostedt:
"Fix printf format warnings in latency-collector.
Use the printf format string with %s to take a string instead of
taking in a string directly"
* tag 'trace-tools-v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tools/latency-collector: Fix -Wformat-security compile warns
The __assign_str() macro logic of the TRACE_EVENT() macro was optimized so
that it no longer needs the second argument. The __assign_str() is always
matched with __string() field that takes a field name and the source for
that field:
__string(field, source)
The TRACE_EVENT() macro logic will save off the source value and then use
that value to copy into the ring buffer via the __assign_str(). Before
commit c1fa617cae ("tracing: Rework __assign_str() and __string() to not
duplicate getting the string"), the __assign_str() needed the second
argument which would perform the same logic as the __string() source
parameter did. Not only would this add overhead, but it was error prone as
if the __assign_str() source produced something different, it may not have
allocated enough for the string in the ring buffer (as the __string()
source was used to determine how much to allocate)
Now that the __assign_str() just uses the same string that was used in
__string() it no longer needs the source parameter. It can now be removed.
-----BEGIN PGP SIGNATURE-----
iIkEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZk9RMBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qur+AP9jbSYaGhzZdJ7a3HGA8M4l6JNju8nC
GcX1JpJT4z1qvgD3RkoNvP87etDAUAqmbVhVWnUHCY/vTqr9uB/gqmG6Ag==
=Y+6f
-----END PGP SIGNATURE-----
Merge tag 'trace-assign-str-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing cleanup from Steven Rostedt:
"Remove second argument of __assign_str()
The __assign_str() macro logic of the TRACE_EVENT() macro was
optimized so that it no longer needs the second argument. The
__assign_str() is always matched with __string() field that takes a
field name and the source for that field:
__string(field, source)
The TRACE_EVENT() macro logic will save off the source value and then
use that value to copy into the ring buffer via the __assign_str().
Before commit c1fa617cae ("tracing: Rework __assign_str() and
__string() to not duplicate getting the string"), the __assign_str()
needed the second argument which would perform the same logic as the
__string() source parameter did. Not only would this add overhead, but
it was error prone as if the __assign_str() source produced something
different, it may not have allocated enough for the string in the ring
buffer (as the __string() source was used to determine how much to
allocate)
Now that the __assign_str() just uses the same string that was used in
__string() it no longer needs the source parameter. It can now be
removed"
* tag 'trace-assign-str-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/treewide: Remove second parameter of __assign_str()
- Avoid on-stack cpumask variables in a number of places.
- Move struct termio to asm/termios.h, matching other architectures and
allowing certain user space applications to build also for sparc.
- Fix missing prototype warnings for sparc64.
- Fix version generation warnings for sparc32.
- Fix bug where non-consecutive CPU IDs lead to some CPUs not starting.
- Simplification using swap and cleanup using NULL for pointer.
- Convert sparc parport and chmc drivers to use remove callbacks
returning void.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQQfqfbgobF48oKMeq81AykqDLayywUCZk80zBQcYW5kcmVhc0Bn
YWlzbGVyLmNvbQAKCRA1AykqDLayy8IyAQD2qyhO2gL1HZ1+HPAv3PhPABYSJ8ln
V7iJUpyp4PDw3AD+Kw6RHnBN+pK3Q5bxZRizNl5BLMTG1tJ//LW7/TVtJgo=
=ZFju
-----END PGP SIGNATURE-----
Merge tag 'sparc-for-6.10-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/alarsson/linux-sparc
Pull sparc updates from Andreas Larsson:
- Avoid on-stack cpumask variables in a number of places
- Move struct termio to asm/termios.h, matching other architectures and
allowing certain user space applications to build also for sparc
- Fix missing prototype warnings for sparc64
- Fix version generation warnings for sparc32
- Fix bug where non-consecutive CPU IDs lead to some CPUs not starting
- Simplification using swap and cleanup using NULL for pointer
- Convert sparc parport and chmc drivers to use remove callbacks
returning void
* tag 'sparc-for-6.10-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/alarsson/linux-sparc:
sparc/leon: Remove on-stack cpumask var
sparc/pci_msi: Remove on-stack cpumask var
sparc/of: Remove on-stack cpumask var
sparc/irq: Remove on-stack cpumask var
sparc/srmmu: Remove on-stack cpumask var
sparc: chmc: Convert to platform remove callback returning void
sparc: parport: Convert to platform remove callback returning void
sparc: Compare pointers to NULL instead of 0
sparc: Use swap() to fix Coccinelle warning
sparc32: Fix version generation failed warnings
sparc64: Fix number of online CPUs
sparc64: Fix prototype warning for sched_clock
sparc64: Fix prototype warnings in adi_64.c
sparc64: Fix prototype warning for dma_4v_iotsb_bind
sparc64: Fix prototype warning for uprobe_trap
sparc64: Fix prototype warning for alloc_irqstack_bootmem
sparc64: Fix prototype warning for vmemmap_free
sparc64: Fix prototype warnings in traps_64.c
sparc64: Fix prototype warning for init_vdso_image
sparc: move struct termio to asm/termios.h
- Fix broken FP register state tracking which resulted in filesystem
corruption when dm-crypt is used
- Workarounds for Arm CPU errata affecting the SSBS Spectre mitigation
- Fix lockdep assertion in DMC620 memory controller PMU driver
- Fix alignment of BUG table when CONFIG_DEBUG_BUGVERBOSE is disabled
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmZN3xcQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNMWjCACBIwegWWitCxgvujTPzOc0AwbxJjJWVGF4
0Y3sthbirIJc8e5K7HYv4wbbCHbaqHX4T9noAKx3wvskEomcNqYyI5Wzr/KTR82f
OHWHeMebFCAvo+UKTBa71JZcjgB4wi4+UuXIV1tViuMvGRKJW3nXKSwIt4SSQOYM
VmS8bvqyyJZtnpNDgniY6QHRCWatagHpQFNFePkvsJiSoi78+FZWb2k2h55rz0iE
EG2Vuzw5r1MNqXHCpPaU7fNwsLFbNYiJz3CQYisBLondyDDMsK1XUkLWoxWgGJbK
SNbE3becd0C2SlOTwllV4R59AsmMPvA7tOHbD41aGOSBlKY1Hi91
=ivar
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"The major fix here is for a filesystem corruption issue reported on
Apple M1 as a result of buggy management of the floating point
register state introduced in 6.8. I initially reverted one of the
offending patches, but in the end Ard cooked a proper fix so there's a
revert+reapply in the series.
Aside from that, we've got some CPU errata workarounds and misc other
fixes.
- Fix broken FP register state tracking which resulted in filesystem
corruption when dm-crypt is used
- Workarounds for Arm CPU errata affecting the SSBS Spectre
mitigation
- Fix lockdep assertion in DMC620 memory controller PMU driver
- Fix alignment of BUG table when CONFIG_DEBUG_BUGVERBOSE is
disabled"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64/fpsimd: Avoid erroneous elide of user state reload
Reapply "arm64: fpsimd: Implement lazy restore for kernel mode FPSIMD"
arm64: asm-bug: Add .align 2 to the end of __BUG_ENTRY
perf/arm-dmc620: Fix lockdep assert in ->event_init()
Revert "arm64: fpsimd: Implement lazy restore for kernel mode FPSIMD"
arm64: errata: Add workaround for Arm errata 3194386 and 3312417
arm64: cputype: Add Neoverse-V3 definitions
arm64: cputype: Add Cortex-X4 definitions
arm64: barrier: Restore spec_bar() macro
Several new features here:
- virtio-net is finally supported in vduse.
- Virtio (balloon and mem) interaction with suspend is improved
- vhost-scsi now handles signals better/faster.
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmZN570PHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRp2JUH/1K3fZOHymop6Y5Z3USFS7YdlF+dniedY/vg
TKyWERkXOlxq1d9DVxC0mN7tk72DweuWI0YJjLXofrEW1VuW29ecSbyFXxpeWJls
b7ErffxDAFRas5jkMCngD8TuFnbEegU0mGP5kbiHpEndBydQ2hH99Gg0x7swW+cE
xsvU5zonCCLwLGIP2DrVrn9qGOHtV6o8eZfVKDVXfvicn3lFBkUSxlwEYsO9RMup
aKxV4FT2Pb1yBicwBK4TH1oeEXqEGy1YLEn+kAHRbgoC/5L0/LaiqrkzwzwwOIPj
uPGkacf8CIbX0qZo5EzD8kvfcYL1xhU3eT9WBmpp2ZwD+4bINd4=
=nax1
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
"Several new features here:
- virtio-net is finally supported in vduse
- virtio (balloon and mem) interaction with suspend is improved
- vhost-scsi now handles signals better/faster
And fixes, cleanups all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (48 commits)
virtio-pci: Check if is_avq is NULL
virtio: delete vq in vp_find_vqs_msix() when request_irq() fails
MAINTAINERS: add Eugenio Pérez as reviewer
vhost-vdpa: Remove usage of the deprecated ida_simple_xx() API
vp_vdpa: don't allocate unused msix vectors
sound: virtio: drop owner assignment
fuse: virtio: drop owner assignment
scsi: virtio: drop owner assignment
rpmsg: virtio: drop owner assignment
nvdimm: virtio_pmem: drop owner assignment
wifi: mac80211_hwsim: drop owner assignment
vsock/virtio: drop owner assignment
net: 9p: virtio: drop owner assignment
net: virtio: drop owner assignment
net: caif: virtio: drop owner assignment
misc: nsm: drop owner assignment
iommu: virtio: drop owner assignment
drm/virtio: drop owner assignment
gpio: virtio: drop owner assignment
firmware: arm_scmi: virtio: drop owner assignment
...
Fix the following -Wformat-security compile warnings adding missing
format arguments:
latency-collector.c: In function ‘show_available’:
latency-collector.c:938:17: warning: format not a string literal and
no format arguments [-Wformat-security]
938 | warnx(no_tracer_msg);
| ^~~~~
latency-collector.c:943:17: warning: format not a string literal and
no format arguments [-Wformat-security]
943 | warnx(no_latency_tr_msg);
| ^~~~~
latency-collector.c: In function ‘find_default_tracer’:
latency-collector.c:986:25: warning: format not a string literal and
no format arguments [-Wformat-security]
986 | errx(EXIT_FAILURE, no_tracer_msg);
|
^~~~
latency-collector.c: In function ‘scan_arguments’:
latency-collector.c:1881:33: warning: format not a string literal and
no format arguments [-Wformat-security]
1881 | errx(EXIT_FAILURE, no_tracer_msg);
| ^~~~
Link: https://lore.kernel.org/linux-trace-kernel/20240404011009.32945-1-skhan@linuxfoundation.org
Cc: stable@vger.kernel.org
Fixes: e23db805da ("tracing/tools: Add the latency-collector to tools directory")
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Bergmann which enables a number of additional build-time warnings. We
fixed all the fallout which we could find, there may still be a few
stragglers.
- Samuel Holland has developed the series "Unified cross-architecture
kernel-mode FPU API". This does a lot of consolidation of
per-architecture kernel-mode FPU usage and enables the use of newer AMD
GPUs on RISC-V.
- Tao Su has fixed some selftests build warnings in the series
"Selftests: Fix compilation warnings due to missing _GNU_SOURCE
definition".
- This pull also includes a nilfs2 fixup from Ryusuke Konishi.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZk6OSAAKCRDdBJ7gKXxA
jpTGAP9hQaZ+g7CO38hKQAtEI8rwcZJtvUAP84pZEGMjYMGLxQD/S8z1o7UHx61j
DUbnunbOkU/UcPx3Fs/gp4KcJARMEgs=
=EPi9
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2024-05-22-17-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more non-mm updates from Andrew Morton:
- A series ("kbuild: enable more warnings by default") from Arnd
Bergmann which enables a number of additional build-time warnings. We
fixed all the fallout which we could find, there may still be a few
stragglers.
- Samuel Holland has developed the series "Unified cross-architecture
kernel-mode FPU API". This does a lot of consolidation of
per-architecture kernel-mode FPU usage and enables the use of newer
AMD GPUs on RISC-V.
- Tao Su has fixed some selftests build warnings in the series
"Selftests: Fix compilation warnings due to missing _GNU_SOURCE
definition".
- This pull also includes a nilfs2 fixup from Ryusuke Konishi.
* tag 'mm-nonmm-stable-2024-05-22-17-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (23 commits)
nilfs2: make block erasure safe in nilfs_finish_roll_forward()
selftests/harness: use 1024 in place of LINE_MAX
Revert "selftests/harness: remove use of LINE_MAX"
selftests/fpu: allow building on other architectures
selftests/fpu: move FP code to a separate translation unit
drm/amd/display: use ARCH_HAS_KERNEL_FPU_SUPPORT
drm/amd/display: only use hard-float, not altivec on powerpc
riscv: add support for kernel-mode FPU
x86: implement ARCH_HAS_KERNEL_FPU_SUPPORT
powerpc: implement ARCH_HAS_KERNEL_FPU_SUPPORT
LoongArch: implement ARCH_HAS_KERNEL_FPU_SUPPORT
lib/raid6: use CC_FLAGS_FPU for NEON CFLAGS
arm64: crypto: use CC_FLAGS_FPU for NEON CFLAGS
arm64: implement ARCH_HAS_KERNEL_FPU_SUPPORT
ARM: crypto: use CC_FLAGS_FPU for NEON CFLAGS
ARM: implement ARCH_HAS_KERNEL_FPU_SUPPORT
arch: add ARCH_HAS_KERNEL_FPU_SUPPORT
x86/fpu: fix asm/fpu/types.h include guard
kbuild: enable -Wcast-function-type-strict unconditionally
kbuild: enable -Wformat-truncation on clang
...
nested allocations within stackdepot and page-owner.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZk6MRwAKCRDdBJ7gKXxA
jnzeAP9WHW425N7pWmE7rK7n8oXZK9f356dKJMtz2A35Bx6XJgEAuK86kDRA4Kv3
kg8mtwzOIQYKZWzn5VlcvBbtlhjKGwM=
=9/Ou
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2024-05-22-17-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more mm updates from Andrew Morton:
"A series from Dave Chinner which cleans up and fixes the handling of
nested allocations within stackdepot and page-owner"
* tag 'mm-stable-2024-05-22-17-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/page-owner: use gfp_nested_mask() instead of open coded masking
stackdepot: use gfp_nested_mask() instead of open coded masking
mm: lift gfp_kmemleak_mask() to gfp.h
With the rework of how the __string() handles dynamic strings where it
saves off the source string in field in the helper structure[1], the
assignment of that value to the trace event field is stored in the helper
value and does not need to be passed in again.
This means that with:
__string(field, mystring)
Which use to be assigned with __assign_str(field, mystring), no longer
needs the second parameter and it is unused. With this, __assign_str()
will now only get a single parameter.
There's over 700 users of __assign_str() and because coccinelle does not
handle the TRACE_EVENT() macro I ended up using the following sed script:
git grep -l __assign_str | while read a ; do
sed -e 's/\(__assign_str([^,]*[^ ,]\) *,[^;]*/\1)/' $a > /tmp/test-file;
mv /tmp/test-file $a;
done
I then searched for __assign_str() that did not end with ';' as those
were multi line assignments that the sed script above would fail to catch.
Note, the same updates will need to be done for:
__assign_str_len()
__assign_rel_str()
__assign_rel_str_len()
I tested this with both an allmodconfig and an allyesconfig (build only for both).
[1] https://lore.kernel.org/linux-trace-kernel/20240222211442.634192653@goodmis.org/
Link: https://lore.kernel.org/linux-trace-kernel/20240516133454.681ba6a0@rorschach.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Christian König <christian.koenig@amd.com> for the amdgpu parts.
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> #for
Acked-by: Rafael J. Wysocki <rafael@kernel.org> # for thermal
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Darrick J. Wong <djwong@kernel.org> # xfs
Tested-by: Guenter Roeck <linux@roeck-us.net>
Use '%pD' to print out the filename, and print out the actual offset
within the file too, rather than just what the virtual address of the
mapping is (which doesn't tell you anything about any mapping offsets).
Also, use the exact vma_lookup() instead of find_vma() - the latter
looks up any vma _after_ the address, which is of questionable value
(yes, maybe you fell off the beginning, but you'd be more likely to fall
off the end).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge trivial x86 code generation annoyances
- Introduce helper macros for clang asm input problems
- use said macros to improve trivially stupid code generation issues in
bitops and array_index_mask_nospec
- also improve codegen with 32-bit array index comparisons
None of these really matter, but I look at code generation and profiles
fairly regularly, and these misfeatures caused the generated code to
look really odd and distract from the real issues.
* branch 'x86-codegen' of local tree:
x86: improve bitop code generation with clang
x86: improve array_index_mask_nospec() code generation
clang: work around asm input constraint problems
This uses the new ASM_INPUT_RM macro to avoid the bad code generation
issue that clang has with more generic asm inputs.
This ends up avoiding generating code like this:
mov %r10,(%rsp)
tzcnt (%rsp),%rcx
which now becomes just
tzcnt %r10,%rcx
and in the process ends up also removing a few unnecessary stack frames
when the only use was that pointless "asm uses memory location off stack".
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Don't force the inputs to be 'unsigned long', when the comparison can
easily be done in 32-bit if that's more appropriate.
Note that while we can look at the inputs to choose an appropriate size
for the compare instruction, the output is fixed at 'unsigned long'.
That's not technically optimal either, since a 32-bit 'sbbl' would often
be sufficient.
But for the outgoing mask we don't know how the mask ends up being used
(ie we have uses that have an incoming 32-bit array index, but end up
using the mask for other things). That said, it only costs the extra
REX prefix to always generate the 64-bit mask.
[ A 'sbbl' also always technically generates a 64-bit mask, but with the
upper 32 bits clear: that's fine for when the incoming index that will
be masked is already 32-bit, but not if you use the mask to mask a
pointer afterwards, like the file table lookup does ]
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Work around clang problems with asm constraints that have multiple
possibilities, particularly "g" and "rm".
Clang seems to turn inputs like that into the most generic form, which
is the memory input - but to make matters worse, clang won't even use a
possible original memory location, but will spill the value to stack,
and use the stack for the asm input.
See
https://github.com/llvm/llvm-project/issues/20571#issuecomment-980933442
for some explanation of why clang has this strange behavior, but the end
result is that "g" and "rm" really end up generating horrid code.
Link: https://github.com/llvm/llvm-project/issues/20571
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Here is the big set of char/misc and other driver subsystem updates for
6.10-rc1. Nothing major here, just lots of new drivers and updates for
apis and new hardware types. Included in here are:
- big IIO driver updates with more devices and drivers added
- fpga driver updates
- hyper-v driver updates
- uio_pruss driver removal, no one uses it, other drivers control the
same hardware now
- binder minor updates
- mhi driver updates
- excon driver updates
- counter driver updates
- accessability driver updates
- coresight driver updates
- other hwtracing driver updates
- nvmem driver updates
- slimbus driver updates
- spmi driver updates
- other smaller misc and char driver updates
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZk3lTg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynhZQCfSWyK0lHsys2LhEBmufrB3RCgnZwAn3Lm2eJY
WVk7h01A0lHyacrzm5LN
=s95M
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver subsystem updates from Greg KH:
"Here is the big set of char/misc and other driver subsystem updates
for 6.10-rc1. Nothing major here, just lots of new drivers and updates
for apis and new hardware types. Included in here are:
- big IIO driver updates with more devices and drivers added
- fpga driver updates
- hyper-v driver updates
- uio_pruss driver removal, no one uses it, other drivers control the
same hardware now
- binder minor updates
- mhi driver updates
- excon driver updates
- counter driver updates
- accessability driver updates
- coresight driver updates
- other hwtracing driver updates
- nvmem driver updates
- slimbus driver updates
- spmi driver updates
- other smaller misc and char driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (319 commits)
misc: ntsync: mark driver as "broken" to prevent from building
spmi: pmic-arb: Add multi bus support
spmi: pmic-arb: Register controller for bus instead of arbiter
spmi: pmic-arb: Make core resources acquiring a version operation
spmi: pmic-arb: Make the APID init a version operation
spmi: pmic-arb: Fix some compile warnings about members not being described
dt-bindings: spmi: Deprecate qcom,bus-id
dt-bindings: spmi: Add X1E80100 SPMI PMIC ARB schema
spmi: pmic-arb: Replace three IS_ERR() calls by null pointer checks in spmi_pmic_arb_probe()
spmi: hisi-spmi-controller: Do not override device identifier
dt-bindings: spmi: hisilicon,hisi-spmi-controller: clean up example
dt-bindings: spmi: hisilicon,hisi-spmi-controller: fix binding references
spmi: make spmi_bus_type const
extcon: adc-jack: Document missing struct members
extcon: realtek: Remove unused of_gpio.h
extcon: usbc-cros-ec: Convert to platform remove callback returning void
extcon: usb-gpio: Convert to platform remove callback returning void
extcon: max77843: Convert to platform remove callback returning void
extcon: max3355: Convert to platform remove callback returning void
extcon: intel-mrfld: Convert to platform remove callback returning void
...
Here is the small set of driver core and kernfs changes for 6.10-rc1.
Nothing major here at all, just a small set of changes for some driver
core apis, and minor fixups. Included in here are:
- sysfs_bin_attr_simple_read() helper added and used
- device_show_string() helper added and used
All usages of these were acked by the various maintainers. Also in here
are:
- kernfs minor cleanup
- removed unused functions
- typo fix in documentation
- pay attention to sysfs_create_link() failures in module.c finally.
All of these have been in linux-next for a very long time with no
reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZk3+hQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylfTwCfUyHWkDZuZ7ehdtjzfmcd4EKZBK8An3AAV99G
ox8PXMxuFTaUEdT/69FQ
=2sEo
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the small set of driver core and kernfs changes for 6.10-rc1.
Nothing major here at all, just a small set of changes for some driver
core apis, and minor fixups. Included in here are:
- sysfs_bin_attr_simple_read() helper added and used
- device_show_string() helper added and used
All usages of these were acked by the various maintainers. Also in
here are:
- kernfs minor cleanup
- removed unused functions
- typo fix in documentation
- pay attention to sysfs_create_link() failures in module.c finally
All of these have been in linux-next for a very long time with no
reported problems"
* tag 'driver-core-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
device property: Fix a typo in the description of device_get_child_node_count()
kernfs: mount: Remove unnecessary ‘NULL’ values from knparent
scsi: Use device_show_string() helper for sysfs attributes
platform/x86: Use device_show_string() helper for sysfs attributes
perf: Use device_show_string() helper for sysfs attributes
IB/qib: Use device_show_string() helper for sysfs attributes
hwmon: Use device_show_string() helper for sysfs attributes
driver core: Add device_show_string() helper for sysfs attributes
treewide: Use sysfs_bin_attr_simple_read() helper
sysfs: Add sysfs_bin_attr_simple_read() helper
module: don't ignore sysfs_create_link() failures
driver core: Remove unused platform_notify, platform_notify_remove
Here is the big set of staging driver changes for 6.10-rc1. Not a lot
of cleanups happening this kernel release, intern applications must be
out of sync at the moment. But we did delete two drivers, wlan-ng and
pi433, as they are no longer in use and the developers involved wanted
them just gone entirely, allowing us to drop 19k lines from the tree.
Other than the normal coding style cleanups here, there has been a lot
of work on the vc04_services code, with the intent to finally get that
out of staging hopefully soon. It's getting closer, which is nice to
see.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZk4A+Q8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yn80gCffliMWrtWk55FBGs21J9o1OqgS5IAoLUD00hc
ooGXzYDfwLk6/6wXnvZq
=JLeh
-----END PGP SIGNATURE-----
Merge tag 'staging-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver updates from Greg KH:
"Here is the big set of staging driver changes for 6.10-rc1. Not a lot
of cleanups happening this kernel release, intern applications must be
out of sync at the moment. But we did delete two drivers, wlan-ng and
pi433, as they are no longer in use and the developers involved wanted
them just gone entirely, allowing us to drop 19k lines from the tree.
Other than the normal coding style cleanups here, there has been a lot
of work on the vc04_services code, with the intent to finally get that
out of staging hopefully soon. It's getting closer, which is nice to
see.
All of these have been in linux-next for a while with no reported
issues"
* tag 'staging-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (98 commits)
staging: pi433: Remove unused driver
staging: vchiq_core: Add missing blank lines
staging: vchiq_core: Drop unnecessary blank lines
staging: vchiq_core: Add parentheses to VCHIQ_MSG_SRCPORT
staging: vchiq_core: Use printk messages for devices
staging: vchiq_arm: Drop unnecessary NULL check
staging: vc04_services: Delete unnecessary NULL check
staging: vc04_services: vchiq_arm: Fix NULL ptr dereferences
Staging: rtl8192e: Rename variable DssCCk
Staging: rtl8192e: Rename variable ExtHTCapInfo
Staging: rtl8192e: Rename variable MPDUDensity
Staging: rtl8192e: Rename variable MaxRxAMPDUFactor
Staging: rtl8192e: Rename variable MaxAMSDUSize
Staging: rtl8192e: Rename variable DelayBA
Staging: rtl8192e: Rename variable RxSTBC
Staging: rtl8192e: Rename variable TxSTBC
Staging: rtl8192e: Rename variable GreenField
Staging: rtl8192e: Rename variable ShortGI20Mhz
Staging: rtl8192e: Rename variable ShortGI40Mhz
Staging: rtl8192e: Rename variable MimoPwrSave
...
Here is the big set of tty/serial driver changes for 6.10-rc1. Included
in here are:
- Usual good set of api cleanups and evolution by Jiri Slaby to make
the serial interfaces move out of the 1990's by using kfifos instead
of hand-rolling their own logic.
- 8250_exar driver updates
- max3100 driver updates
- sc16is7xx driver updates
- exar driver updates
- sh-sci driver updates
- tty ldisc api addition to help refuse bindings
- other smaller serial driver updates
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZk4Cvg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymqpwCgnHU1NeBBUsvoSDOLk5oApIQ4jVgAn102jWlw
3dNDhA4i3Ay/mZdv8/Kj
=TI+P
-----END PGP SIGNATURE-----
Merge tag 'tty-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial updates from Greg KH:
"Here is the big set of tty/serial driver changes for 6.10-rc1.
Included in here are:
- Usual good set of api cleanups and evolution by Jiri Slaby to make
the serial interfaces move out of the 1990's by using kfifos
instead of hand-rolling their own logic.
- 8250_exar driver updates
- max3100 driver updates
- sc16is7xx driver updates
- exar driver updates
- sh-sci driver updates
- tty ldisc api addition to help refuse bindings
- other smaller serial driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (113 commits)
serial: Clear UPF_DEAD before calling tty_port_register_device_attr_serdev()
serial: imx: Raise TX trigger level to 8
serial: 8250_pnp: Simplify "line" related code
serial: sh-sci: simplify locking when re-issuing RXDMA fails
serial: sh-sci: let timeout timer only run when DMA is scheduled
serial: sh-sci: describe locking requirements for invalidating RXDMA
serial: sh-sci: protect invalidating RXDMA on shutdown
tty: add the option to have a tty reject a new ldisc
serial: core: Call device_set_awake_path() for console port
dt-bindings: serial: brcm,bcm2835-aux-uart: convert to dtschema
tty: serial: uartps: Add support for uartps controller reset
arm64: zynqmp: Add resets property for UART nodes
dt-bindings: serial: cdns,uart: Add optional reset property
serial: 8250_pnp: Switch to DEFINE_SIMPLE_DEV_PM_OPS()
serial: 8250_exar: Keep the includes sorted
serial: 8250_exar: Make type of bit the same in exar_ee_*_bit()
serial: 8250_exar: Use BIT() in exar_ee_read()
serial: 8250_exar: Switch to use dev_err_probe()
serial: 8250_exar: Return directly from switch-cases
serial: 8250_exar: Decrease indentation level
...
Here is the big set of USB and Thunderbolt changes for 6.10-rc1.
Nothing hugely earth-shattering, just constant forward progress for
hardware support of new devices and cleanups over the drivers.
Included in here are:
- Thunderbolt / USB 4 driver updates
- typec driver updates
- dwc3 driver updates
- gadget driver updates
- uss720 driver id additions and fixes (people use USB->arallel port
devices still!)
- onboard-hub driver rename and additions for new hardware
- xhci driver updates
- other small USB driver updates and additions for quirks and api
changes
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZk4E7w8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yn0kACgr3uvAWXvfb9R4vCpC65F4f49ZQwAoIkHQBPl
/5HdrlIIYW2OzdUixH3e
=e3pI
-----END PGP SIGNATURE-----
Merge tag 'usb-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt changes for 6.10-rc1.
Nothing hugely earth-shattering, just constant forward progress for
hardware support of new devices and cleanups over the drivers.
Included in here are:
- Thunderbolt / USB 4 driver updates
- typec driver updates
- dwc3 driver updates
- gadget driver updates
- uss720 driver id additions and fixes (people use USB->arallel port
devices still!)
- onboard-hub driver rename and additions for new hardware
- xhci driver updates
- other small USB driver updates and additions for quirks and api
changes
All of these have been in linux-next for a while with no reported
problems"
* tag 'usb-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (154 commits)
drm/bridge: aux-hpd-bridge: correct devm_drm_dp_hpd_bridge_add() stub
usb: fotg210: Add missing kernel doc description
usb: dwc3: core: Fix unused variable warning in core driver
usb: typec: tipd: rely on i2c_get_match_data()
usb: typec: tipd: fix event checking for tps6598x
usb: typec: tipd: fix event checking for tps25750
dt-bindings: usb: qcom,dwc3: fix interrupt max items
usb: fotg210: Use *-y instead of *-objs in Makefile
usb: phy: tegra: Replace of_gpio.h by proper one
usb: typec: ucsi: displayport: Fix potential deadlock
usb: typec: qcom-pmic-typec: split HPD bridge alloc and registration
usb: musc: Remove unused list 'buffers'
usb: dwc3: Wait unconditionally after issuing EndXfer command
usb: gadget: u_audio: Clear uac pointer when freed.
usb: gadget: u_audio: Fix race condition use of controls after free during gadget unbind.
dt-bindings: usb: dwc3: Add QDU1000 compatible
usb: core: Remove the useless struct usb_devmap which is just a bitmap
MAINTAINERS: Remove {ehci,uhci}-platform.c from ARM/VT8500 entry
USB: usb_parse_endpoint: ignore reserved bits
usb: xhci: compact 'trb_in_td()' arguments
...
- Ensure seldom updated triggers have a brightness value before first update
- New Device Support
- Add support for Simatic IPC Device BX_59A to IPC LEDs Core
- Add support for Qualcomm PMI8950 PWM to LPG Core
- New Functionality
- Add a bunch of new LED function identifiers
- Add support for High Resolution Timers in LED Trigger Patten
- Fix-ups
- Shift out Audio Trigger to the Sound subsystem
- Convert suitable calls to devm_* managed resources
- Device Tree binding adaptions/conversions/creation
- Remove superfluous code/variables/attributes and simplify overall
- Use/convert to new/better APIs/helpers/MACROs instead of hand-rolling implementations
- Bug Fixes
- Repair enabling Torch Mode from V4L2 on the second LED
- Ensure PWM is disabled when suspending
-----BEGIN PGP SIGNATURE-----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=rF2l
-----END PGP SIGNATURE-----
Merge tag 'leds-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED updates from Lee Jones:
"Core Frameworks:
- Ensure seldom updated triggers have a brightness value before first
update
New Device Support:
- Add support for Simatic IPC Device BX_59A to IPC LEDs Core
- Add support for Qualcomm PMI8950 PWM to LPG Core
New Functionality:
- Add a bunch of new LED function identifiers
- Add support for High Resolution Timers in LED Trigger Patten
Fix-ups:
- Shift out Audio Trigger to the Sound subsystem
- Convert suitable calls to devm_* managed resources
- Device Tree binding adaptions/conversions/creation
- Remove superfluous code/variables/attributes and simplify overall
- Use/convert to new/better APIs/helpers/MACROs instead of
hand-rolling implementations
Bug Fixes:
- Repair enabling Torch Mode from V4L2 on the second LED
- Ensure PWM is disabled when suspending"
* tag 'leds-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (28 commits)
leds: mt6370: Remove unused field 'reg_cfgs' from 'struct mt6370_priv'
leds: lp50xx: Remove unused field 'num_of_banked_leds' from 'struct lp50xx'
leds: lp50xx: Remove unused field 'bank_modules' from 'struct lp50xx_led'
leds: aat1290: Remove unused field 'torch_brightness' from 'struct aat1290_led'
leds: sun50i-a100: Use match_string() helper to simplify the code
leds: pwm: Disable PWM when going to suspend
leds: trigger: pattern: Add support for hrtimer
leds: mt6360: Fix the second LED can not enable torch mode by V4L2
dt-bindings: leds: leds-qcom-lpg: Add support for PMI8950 PWM
leds: qcom-lpg: Add support for PMI8950 PWM
leds: apu: Remove duplicate DMI lookup data
leds: trigger: netdev: Remove not needed call to led_set_brightness in deactivate
dt-bindings: leds: Add LED_FUNCTION_SPEED_* for link speed on LAN/WAN
dt-bindings: leds: Add LED_FUNCTION_MOBILE for mobile network
leds: simatic-ipc-leds-gpio: Add support for module BX-59A
dt-bindings: leds: qcom-lpg: Document PM6150L compatible
dt-bindings: leds: pca963x: Convert text bindings to YAML
leds: an30259a: Use devm_mutex_init() for mutex initialization
leds: mlxreg: Use devm_mutex_init() for mutex initialization
leds: nic78bx: Use devm API to cleanup module's resources
...
- Add support for X-Powers AXP717 PMIC to AXP22X
- Add support for Rockchip RK816 PMIC to RK8XX
- Add support for TI TPS65224 PMIC to TPS6594
- New Functionality
- Add Power Off functionality to Rohm BD71828
- Allow I2C SMBus access in Renesas RSMU
- Fix-ups
- Device Tree binding adaptions/conversions/creation
- Shift Intel support over to MSI interrupts
- Generify adding platform data away from being ACPI specific
- Use device core supplied attribute to register sysfs entries
- Replace hand-rolled functionality with generic APIs
- Utilise centrally provided helpers and macros
- Clean-up error handling
- Remove superfluous/duplicated/unused sections
- Trivial; spelling, whitespace, coding-style adaptions
- More Maple Tree conversions
-----BEGIN PGP SIGNATURE-----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=QAjw
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Device Support:
- Add support for X-Powers AXP717 PMIC to AXP22X
- Add support for Rockchip RK816 PMIC to RK8XX
- Add support for TI TPS65224 PMIC to TPS6594
New Functionality:
- Add Power Off functionality to Rohm BD71828
- Allow I2C SMBus access in Renesas RSMU
Fix-ups:
- Device Tree binding adaptions/conversions/creation
- Shift Intel support over to MSI interrupts
- Generify adding platform data away from being ACPI specific
- Use device core supplied attribute to register sysfs entries
- Replace hand-rolled functionality with generic APIs
- Utilise centrally provided helpers and macros
- Clean-up error handling
- Remove superfluous/duplicated/unused sections
- Trivial; spelling, whitespace, coding-style adaptions
- More Maple Tree conversions"
* tag 'mfd-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (44 commits)
dt-bindings: mfd: Use full path to other schemas
mfd: rsmu: support I2C SMBus access
dt-bindings: mfd: Convert lp873x.txt to json-schema
dt-bindings: mfd: aspeed: Drop 'oneOf' for pinctrl node
dt-bindings: mfd: allwinner,sun6i-a31-prcm: Use hyphens in node names
mfd: ssbi: Remove unused field 'slave' from 'struct ssbi'
mfd: kempld: Remove custom DMI matching code
mfd: cs42l43: Update patching revision check
dt-bindings: mfd: qcom: pm8xxx: Add pm8901 compatible
mfd: timberdale: Remove redundant assignment to variable err
dt-bindings: mfd: qcom,spmi-pmic: Add pbs to SPMI device types
dt-bindings: mfd: syscon: Add ti,am62p-cpsw-mac-efuse compatible
dt-bindings: mfd: qcom,tcsr: Add compatible for SDX75
mfd: axp20x: Convert to use Maple Tree register cache
mfd: bd71828: Remove commented code lines
mfd: intel-m10-bmc: Change staging size to a variable
dt-bindings: mfd: Add ROHM BD71879
mfd: Tidy Kconfig dependency's parentheses
mfd: ocelot-spi: Use spi_sync_transfer()
dt-bindings: mfd: syscon: Add missing simple syscon compatibles
...
* Support for byte/half-word compare-and-exchange, emulated via LR/SC
loops.
* Support for Rust.
* Support for Zihintpause in hwprobe.
* Support for the PR_RISCV_SET_ICACHE_FLUSH_CTX prctl().
* Support for lockless lockrefs.
-----BEGIN PGP SIGNATURE-----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=YLoD
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.10-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Add byte/half-word compare-and-exchange, emulated via LR/SC loops
- Support for Rust
- Support for Zihintpause in hwprobe
- Add PR_RISCV_SET_ICACHE_FLUSH_CTX prctl()
- Support lockless lockrefs
* tag 'riscv-for-linus-6.10-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (42 commits)
riscv: defconfig: Enable CONFIG_CLK_SOPHGO_CV1800
riscv: select ARCH_HAS_FAST_MULTIPLIER
riscv: mm: still create swiotlb buffer for kmalloc() bouncing if required
riscv: Annotate pgtable_l{4,5}_enabled with __ro_after_init
riscv: Remove redundant CONFIG_64BIT from pgtable_l{4,5}_enabled
riscv: mm: Always use an ASID to flush mm contexts
riscv: mm: Preserve global TLB entries when switching contexts
riscv: mm: Make asid_bits a local variable
riscv: mm: Use a fixed layout for the MM context ID
riscv: mm: Introduce cntx2asid/cntx2version helper macros
riscv: Avoid TLB flush loops when affected by SiFive CIP-1200
riscv: Apply SiFive CIP-1200 workaround to single-ASID sfence.vma
riscv: mm: Combine the SMP and UP TLB flush code
riscv: Only send remote fences when some other CPU is online
riscv: mm: Broadcast kernel TLB flushes only when needed
riscv: Use IPIs for remote cache/TLB flushes by default
riscv: Factor out page table TLB synchronization
riscv: Flush the instruction cache during SMP bringup
riscv: hwprobe: export Zihintpause ISA extension
riscv: misaligned: remove CONFIG_RISCV_M_MODE specific code
...
1, Select some options in Kconfig;
2, Give a chance to build with !CONFIG_SMP;
3, Switch to use built-in rustc target;
4, Add new supported device nodes to dts;
5, Some bug fixes and other small changes;
6, Update the default config file.
-----BEGIN PGP SIGNATURE-----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=WR15
-----END PGP SIGNATURE-----
Merge tag 'loongarch-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Select some options in Kconfig
- Give a chance to build with !CONFIG_SMP
- Switch to use built-in rustc target
- Add new supported device nodes to dts
- Some bug fixes and other small changes
- Update the default config file
* tag 'loongarch-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: Update Loongson-3 default config file
LoongArch: dts: Add new supported device nodes to Loongson-2K2000
LoongArch: dts: Add new supported device nodes to Loongson-2K0500
LoongArch: dts: Remove "disabled" state of clock controller node
LoongArch: rust: Switch to use built-in rustc target
LoongArch: Fix callchain parse error with kernel tracepoint events again
LoongArch: Give a chance to build with !CONFIG_SMP
LoongArch: Select THP_SWAP if HAVE_ARCH_TRANSPARENT_HUGEPAGE
LoongArch: Select ARCH_WANT_DEFAULT_BPF_JIT
LoongArch: Select ARCH_SUPPORTS_INT128 if CC_HAS_INT128
LoongArch: Select ARCH_HAS_FAST_MULTIPLIER
- Cleanup code around removed early_printk
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCZk3KNgAKCRDKSWXLKUoM
IduXAJsFvZYmUjaHxiBm9RsGdMMervOw5ACfeSwtGVzgCkGTjiovpdpsExVGRzg=
=wLRz
-----END PGP SIGNATURE-----
Merge tag 'microblaze-v6.10' of git://git.monstr.eu/linux-2.6-microblaze
Pull microblaze updates from Michal Simek:
- Cleanup code around removed early_printk
* tag 'microblaze-v6.10' of git://git.monstr.eu/linux-2.6-microblaze:
microblaze: Remove early printk call from cpuinfo-static.c
microblaze: Remove gcc flag for non existing early_printk.c file
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCZk3w7AAKCRDh3BK/laaZ
PFlfAQD7puZ3BowTZ6cTCJ0Zg6U9wNMszlYHl3WyDnYDicaiVgD9HTqlv1pbNoFh
e5hyXI4vgaMZkYfpET0zBhVkirSKEg4=
=1vRI
-----END PGP SIGNATURE-----
Merge tag 'ovl-update-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs
Pull overlayfs updates from Miklos Szeredi:
- Add tmpfile support
- Clean up include
* tag 'ovl-update-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs:
ovl: remove duplicate included header
ovl: remove upper umask handling from ovl_create_upper()
ovl: implement tmpfile
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCZk231AAKCRDh3BK/laaZ
PKarAP9yWQ6HfqiWdMlW5gO9FLpm0Cbey6DAs1cisAdw86uLbwEAqpYKPXIcOaHX
IIzCu5R5tbwNHUxADtzznC9r9o/ZHQY=
=KiAB
-----END PGP SIGNATURE-----
Merge tag 'fuse-update-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse updates from Miklos Szeredi:
- Add fs-verity support (Richard Fung)
- Add multi-queue support to virtio-fs (Peter-Jan Gootzen)
- Fix a bug in NOTIFY_RESEND handling (Hou Tao)
- page -> folio cleanup (Matthew Wilcox)
* tag 'fuse-update-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
virtio-fs: add multi-queue support
virtio-fs: limit number of request queues
fuse: clear FR_SENT when re-adding requests into pending list
fuse: set FR_PENDING atomically in fuse_resend()
fuse: Add initial support for fs-verity
fuse: Convert fuse_readpages_end() to use folio_end_read()
Our applications, built on Elasticsearch[0], frequently create and
delete files. These applications operate within containers, some with a
memory limit exceeding 100GB. Over prolonged periods, the accumulation
of negative dentries within these containers can amount to tens of
gigabytes.
Upon container exit, directories are deleted. However, due to the
numerous associated dentries, this process can be time-consuming. Our
users have expressed frustration with this prolonged exit duration,
which constitutes our first issue.
Simultaneously, other processes may attempt to access the parent
directory of the Elasticsearch directories. Since the task responsible
for deleting the dentries holds the inode lock, processes attempting
directory lookup experience significant delays. This issue, our second
problem, is easily demonstrated:
- Task 1 generates negative dentries:
$ pwd
~/test
$ mkdir es && cd es/ && ./create_and_delete_files.sh
[ After generating tens of GB dentries ]
$ cd ~/test && rm -rf es
[ It will take a long duration to finish ]
- Task 2 attempts to lookup the 'test/' directory
$ pwd
~/test
$ ls
The 'ls' command in Task 2 experiences prolonged execution as Task 1
is deleting the dentries.
We've devised a solution to address both issues by deleting associated
dentry when removing a file. Interestingly, we've noted that a similar
patch was proposed years ago[1], although it was rejected citing the
absence of tangible issues caused by negative dentries. Given our
current challenges, we're resubmitting the proposal. All relevant
stakeholders from previous discussions have been included for reference.
Some alternative solutions are also under discussion[2][3], such as
shrinking child dentries outside of the parent inode lock or even
asynchronously shrinking child dentries. However, given the
straightforward nature of the current solution, I believe this approach
is still necessary.
[ NOTE! This is a pretty fundamental change in how we deal with
unlinking dentries, and it doesn't change the fact that you can have
lots of negative dentries from just doing negative lookups.
But the kernel test robot is at least initially happy with this from a
performance angle, so I'm applying this ASAP just to get more testing
and as a "known fix for an issue people hit in real life".
Put another way: we should still look at the alternatives, and this
patch may get reverted if somebody finds a performance regression on
some other load. - Linus ]
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://github.com/elastic/elasticsearch [0]
Link: https://patchwork.kernel.org/project/linux-fsdevel/patch/1502099673-31620-1-git-send-email-wangkai86@huawei.com [1]
Link: https://lore.kernel.org/linux-fsdevel/20240511200240.6354-2-torvalds@linux-foundation.org/ [2]
Link: https://lore.kernel.org/linux-fsdevel/CAHk-=wjEMf8Du4UFzxuToGDnF3yLaMcrYeyNAaH1NJWa6fwcNQ@mail.gmail.com/ [3]
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Waiman Long <longman@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Wangkai <wangkai86@huawei.com>
Cc: Colin Walters <walters@verbum.org>
Tested-by: kernel test robot <oliver.sang@intel.com>
Link: https://lore.kernel.org/all/202405221518.ecea2810-oliver.sang@intel.com/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[bug]
In the virtio_pci_common.c function vp_del_vqs, vp_dev->is_avq is involved
to determine whether it is admin virtqueue, but this function vp_dev->is_avq
may be empty. For installations, virtio_pci_legacy does not assign a value
to vp_dev->is_avq.
[fix]
Check whether it is vp_dev->is_avq before use.
[test]
Test with virsh Attach device
Before this patch, the following command would crash the guest system
After applying the patch, everything seems to be working fine.
Signed-off-by: Li Zhang <zhanglikernel@gmail.com>
Message-Id: <1710566754-3532-1-git-send-email-zhanglikernel@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add myself as a reviewer of some VirtIO areas I'm interested.
Until this point I've been scanning manually the list looking for
series that touches this area. Adding myself to make this task easier.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20240213182450.106796-1-eperezma@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
ida_alloc() and ida_free() should be preferred to the deprecated
ida_simple_get() and ida_simple_remove().
Note that the upper limit of ida_simple_get() is exclusive, but the one of
ida_alloc_max() is inclusive. So a -1 has been added when needed.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Simon Horman <horms@kernel.org>
Message-Id: <67c2edf49788c27d5f7a49fc701520b9fcf739b5.1713088999.git.christophe.jaillet@wanadoo.fr>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
When there is a ctlq and it doesn't require interrupt
callbacks,the original method of calculating vectors
wastes hardware msi or msix resources as well as system
IRQ resources.
When conducting performance testing using testpmd in the
guest os, it was found that the performance was lower compared
to directly using vfio-pci to passthrough the device
In scenarios where the virtio device in the guest os does
not utilize interrupts, the vdpa driver still configures
the hardware's msix vector. Therefore, the hardware still
sends interrupts to the host os. Because of this unnecessary
action by the hardware, hardware performance decreases, and
it also affects the performance of the host os.
Before modification:(interrupt mode)
32: 0 0 0 0 PCI-MSI 32768-edge vp-vdpa[0000:00:02.0]-0
33: 0 0 0 0 PCI-MSI 32769-edge vp-vdpa[0000:00:02.0]-1
34: 0 0 0 0 PCI-MSI 32770-edge vp-vdpa[0000:00:02.0]-2
35: 0 0 0 0 PCI-MSI 32771-edge vp-vdpa[0000:00:02.0]-config
After modification:(interrupt mode)
32: 0 0 1 7 PCI-MSI 32768-edge vp-vdpa[0000:00:02.0]-0
33: 36 0 3 0 PCI-MSI 32769-edge vp-vdpa[0000:00:02.0]-1
34: 0 0 0 0 PCI-MSI 32770-edge vp-vdpa[0000:00:02.0]-config
Before modification:(virtio pmd mode for guest os)
32: 0 0 0 0 PCI-MSI 32768-edge vp-vdpa[0000:00:02.0]-0
33: 0 0 0 0 PCI-MSI 32769-edge vp-vdpa[0000:00:02.0]-1
34: 0 0 0 0 PCI-MSI 32770-edge vp-vdpa[0000:00:02.0]-2
35: 0 0 0 0 PCI-MSI 32771-edge vp-vdpa[0000:00:02.0]-config
After modification:(virtio pmd mode for guest os)
32: 0 0 0 0 PCI-MSI 32768-edge vp-vdpa[0000:00:02.0]-config
To verify the use of the virtio PMD mode in the guest operating
system, the following patch needs to be applied to QEMU:
https://lore.kernel.org/all/20240408073311.2049-1-yuxue.liu@jaguarmicro.com
Signed-off-by: Yuxue Liu <yuxue.liu@jaguarmicro.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Heng Qi <hengqi@linux.alibaba.com>
Message-Id: <20240410033020.1310-1-yuxue.liu@jaguarmicro.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
virtio core already sets the .owner, so driver does not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-Id: <20240331-module-owner-virtio-v2-25-98f04bfaf46a@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Anton Yakovlev <anton.yakovlev@opensynergy.com>
virtio core already sets the .owner, so driver does not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-Id: <20240331-module-owner-virtio-v2-24-98f04bfaf46a@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
virtio core already sets the .owner, so driver does not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-Id: <20240331-module-owner-virtio-v2-23-98f04bfaf46a@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
virtio core already sets the .owner, so driver does not need to.
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-Id: <20240331-module-owner-virtio-v2-22-98f04bfaf46a@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
virtio core already sets the .owner, so driver does not need to.
Acked-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-Id: <20240331-module-owner-virtio-v2-21-98f04bfaf46a@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
virtio core already sets the .owner, so driver does not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-Id: <20240331-module-owner-virtio-v2-20-98f04bfaf46a@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
virtio core already sets the .owner, so driver does not need to.
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-Id: <20240331-module-owner-virtio-v2-19-98f04bfaf46a@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
virtio core already sets the .owner, so driver does not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-Id: <20240331-module-owner-virtio-v2-18-98f04bfaf46a@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
virtio core already sets the .owner, so driver does not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-Id: <20240331-module-owner-virtio-v2-17-98f04bfaf46a@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
virtio core already sets the .owner, so driver does not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-Id: <20240331-module-owner-virtio-v2-16-98f04bfaf46a@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
virtio core already sets the .owner, so driver does not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-Id: <20240331-module-owner-virtio-v2-15-98f04bfaf46a@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Alexander Graf <graf@amazon.com>
virtio core already sets the .owner, so driver does not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-Id: <20240331-module-owner-virtio-v2-14-98f04bfaf46a@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
virtio core already sets the .owner, so driver does not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-Id: <20240331-module-owner-virtio-v2-13-98f04bfaf46a@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
virtio core already sets the .owner, so driver does not need to.
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-Id: <20240331-module-owner-virtio-v2-12-98f04bfaf46a@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
virtio core already sets the .owner, so driver does not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-Id: <20240331-module-owner-virtio-v2-11-98f04bfaf46a@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
virtio core already sets the .owner, so driver does not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-Id: <20240331-module-owner-virtio-v2-10-98f04bfaf46a@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
