Utilize rdma_is_port_valid to validate the given port.
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Since the function always returns 0 make it void.
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch adds an interface to allow the driver to initialize the QP priv
struct when the QP is created and after the qpn has been assigned. A
field is added to the QP priv struct to reference the rcd and two new
files are added to contain the function to initialize the rcd field so
that more TID RDMA related code can be added here later.
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
FRWR memory registration is done with a series of calls and WRs.
1. ULP invokes ib_dma_map_sg()
2. ULP invokes ib_map_mr_sg()
3. ULP posts an IB_WR_REG_MR on the Send queue
Step 2 generates an iova. It is permissible for ULPs to change this
iova (with certain restrictions) between steps 2 and 3.
rxe_map_mr_sg captures the MR's iova but later when rxe processes the
REG_MR WR, it ignores the MR's iova field. If a ULP alters the MR's iova
after step 2 but before step 3, rxe never captures that change.
When the remote sends an RDMA Read targeting that MR, rxe looks up the
R_key, but the altered iova does not match the iova stored in the MR,
causing the RDMA Read request to fail.
Reported-by: Anna Schumaker <schumaker.anna@gmail.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Since the function rxe_unregister_device always returns 0, it is changed
to void.
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The variable rxe is only used in the function rxe_xmit_packet, and the
caller functions do not use it. So move this variable into the function
rxe_xmit_packet.
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
link_down is self-explanatory.
rdma_sends and rdma_recvs count the number of RDMA Send and RDMA Receive
operations completed successfully. This is different from the existing
sent_pkts and rcvd_pkts counters because the existing counters measure
packets, not RDMA operations.
ack_deffered is renamed to ack_deferred to fix the spelling.
out_of_sequence is renamed to out_of_seq_request to make clear that it is
counting only requests and not other packets which can be out of sequence.
Signed-off-by: Andrew Boyer <andrew.boyer@dell.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In ib_query_port(), use the netdev's IFF_UP flag to determine phys_state
(flag set = down = POLLING, flag clear = disabled = DISABLED).
Callers can then use the phys_state field to distinguish between links
which have a dead partner, cable missing, etc., from links which are
turned off on the local node. This is useful for HA and supportability.
Signed-off-by: Andrew Boyer <andrew.boyer@dell.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Error completions must still contain a valid wr_id and
qp_num such that the consumer can rely on. Correctly
fill these fields in receive error completions.
Reported-by: Walker Benjamin <benjamin.walker@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Tested-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When resp is in error state, the queued SKBs will not be handled.
The function get_req cleans up the skb queue directly.
CC: Srinivas Eeda <srinivas.eeda@oracle.com>
CC: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Use rdma_set_device_sysfs_group() to register device attributes and
simplify the driver.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Clang warns when an emumerated type is implicitly converted to another.
drivers/infiniband/sw/rxe/rxe.c:106:27: warning: implicit conversion
from enumeration type 'enum rxe_device_param' to different enumeration
type 'enum ib_atomic_cap' [-Wenum-conversion]
rxe->attr.atomic_cap = RXE_ATOMIC_CAP;
~ ^~~~~~~~~~~~~~
drivers/infiniband/sw/rxe/rxe.c:131:22: warning: implicit conversion
from enumeration type 'enum rxe_port_param' to different enumeration
type 'enum ib_port_state' [-Wenum-conversion]
port->attr.state = RXE_PORT_STATE;
~ ^~~~~~~~~~~~~~
drivers/infiniband/sw/rxe/rxe.c:132:24: warning: implicit conversion
from enumeration type 'enum rxe_port_param' to different enumeration
type 'enum ib_mtu' [-Wenum-conversion]
port->attr.max_mtu = RXE_PORT_MAX_MTU;
~ ^~~~~~~~~~~~~~~~
drivers/infiniband/sw/rxe/rxe.c:133:27: warning: implicit conversion
from enumeration type 'enum rxe_port_param' to different enumeration
type 'enum ib_mtu' [-Wenum-conversion]
port->attr.active_mtu = RXE_PORT_ACTIVE_MTU;
~ ^~~~~~~~~~~~~~~~~~~
drivers/infiniband/sw/rxe/rxe.c:151:24: warning: implicit conversion
from enumeration type 'enum rxe_port_param' to different enumeration
type 'enum ib_mtu' [-Wenum-conversion]
ib_mtu_enum_to_int(RXE_PORT_ACTIVE_MTU);
~~~~~~~~~~~~~~~~~~ ^~~~~~~~~~~~~~~~~~~
5 warnings generated.
Use the appropriate values from the expected enumerated type so no
conversion needs to happen then remove the unneeded definitions.
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch moves ruc_loopback() from hfi1 into rdmavt for code sharing
with the qib driver.
Reviewed-by: Brian Welty <brian.welty@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Moving send completion code into rdmavt in order to have shared logic
between qib and hfi1 drivers.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Brian Welty <brian.welty@intel.com>
Signed-off-by: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch moves hfi1_copy_sge() into rdmavt for sharing with qib.
This patch also moves all the wss_*() functions into rdmavt as
several wss_*() functions are called from hfi1_copy_sge()
When SGE copy mode is adaptive, cacheless copy may be done in some cases
for performance reasons. In those cases, X86 cacheless copy function
is called since the drivers that use rdmavt and may set SGE copy mode
to adaptive are X86 only. For this reason, this patch adds
"depends on X86_64" to rdmavt/Kconfig.
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Brian Welty <brian.welty@intel.com>
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The ll parameter is not used in ib_modify_qp_is_ok(), so remove it.
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This function is not in use - delete it.
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In rxe_queue_init, q and q->buf are allocated. In do_mmap_info, q->ip is
allocated. When error occurs, rxe_srq_from_init and the later error
handler do not free these allocated memories. This will make memory leak.
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The driver-provided function check_send_wqe allows the hardware driver to
check and set up the incoming send wqe before it is inserted into the swqe
ring. This patch will rename it as setup_wqe to better reflect its
usage. In addition, this function is only called when all setup is
complete in rdmavt.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The buf is allocated by vmalloc_user in the function rxe_queue_init.
So it is better to free it by vfree.
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
These return the same thing but dev_name is a more conventional use of the
kernel API.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Kernel convention is that a driver for a subsystem will print using
dev_* on the subsystem's struct device, or with dev_* on the physical
device. Drivers should rarely use a pr_* function.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The current code has two copies of the device name, ibdev->dev and
dev_name(&ibdev->dev), and they are setup at different times, which is
very confusing.
Set them both up at the same time and make dev_name() the lead name, which
is the proper use of the driver core APIs. To make it very clear that the
name is not valid until registration pass it in to the
ib_register_device() call rather than messing with ibdev->name directly.
Also the reorganization now checks that dev_name is unique even if it does
not contain a %.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Acked-by: Adit Ranadive <aditr@vmware.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Acked-by: Devesh Sharma <devesh.sharma@broadcom.com>
Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
The post_send() path determines if it should post directly or, schedule
the post for later. The current logic is:
if the swqe ring is empty or (for hfi1) wqe->length <= piothreshold
post the send
else
schedule
This can allow large requests to call the send engine directly. Large
requests can potentially produce a large number of packets prior to
returning to the caller, blocking the caller from posting more requests,
and allowing better parallel processing.
Allow the driver(s) more say in this logic (pass call_send to the driver,
rather than examining a return value).
Update hfi1/qib logic to schedule the send engine if an RC or UC message
is larger than the QP MTU size.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When a read request is retried for the remaining partial
data, the response may restart from read response first
or read response only. So support those cases.
Do not advance the comp psn beyond the current wqe's last_psn
as that could skip over an entire read wqe and will cause the
req_retry() logic to set an incorrect req psn.
An example sequence is as follows:
Write PSN 40 -- this is the current WQE.
Read request PSN 41
Write PSN 42
Receive ACK PSN 42 -- this will complete the current WQE
for PSN 40, and set the comp psn to 42 which is a problem
because the read request at PSN 41 has been skipped over.
So when req_retry() tries to retransmit the read request,
it sets the req psn to 42 which is incorrect.
When retrying a read request, calculate the number of psns
completed based on the dma resid instead of the wqe first_psn.
The wqe first_psn could have moved if the read request was
retried multiple times.
Set the reth length to the dma resid to handle read retries for
the remaining partial data.
Signed-off-by: Vijay Immanuel <vijayi@attalasystems.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Error retries can occur due to timeouts, NAKs or receiving
packets beyond the current read request. Avoid back-to-back
retries due to packet processing, by only retrying the initial
attempt immediately. Subsequent retries must be due to timeouts.
Continue to process completion packets after scheduling a retry.
Signed-off-by: Vijay Immanuel <vijayi@attalasystems.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Don't reset the resp opcode for a replayed read response.
The resp opcode could be in the middle of a write or send
sequence, when the duplicate read request was received.
An example sequence is as follows:
- Receive read request for 12KB PSN 20. Transmit read response
first, middle and last with PSNs 20,21,22.
- Receive write first PSN 23.
At this point the resp psn is 24 and resp opcode is write first.
- The sender notices that PSN 20 is dropped and retransmits.
Receive read request for 12KB PSN 20. Transmit read response
first, middle and last with PSNs 20,21,22. The resp opcode is
set to -1, the resp psn remains 24.
- Receive write first PSN 23. This is processed by duplicate_request().
The resp opcode remains -1 and resp psn remains 24.
- Receive write middle PSN 24. check_op_seq() reports a missing
first error since the resp opcode is -1.
When sending an ack for a duplicate send or write request,
use the psn of the previous ack sent. Do not use the psn
of a read response for the ack.
An example sequence is as follows:
- Receive write PSN 30. Transmit ACK for PSN 30.
- Receive read request 4KB PSN 31. Transmit read response with
PSN 31. The resp psn is now 32.
- The sender notices that PSN 30 is dropped and retransmits.
Receive write PSN 30. duplicate_request() sends an ACK with
PSN 31. That is incorrect since PSN 31 was a read request.
Signed-off-by: Vijay Immanuel <vijayi@attalasystems.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Consolidate all error checks under single if() condition and use helper
unlikely() macro for them, in addition drop unneeded goto labels.
rxe_pool_get_index() already provides RB tree based efficient lookup.
Avoid doing extra checks for error cases which are rare and already
covered by rxe_pool_get_index().
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
While performing lookup in a pool, if entry is found, take the
reference right there, instead of checking again outside the loop and
save one branch.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Normal practice is to have enum defines in capital letters.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Concurrent readers which read rb tree are protected using read lock.
Concurrent writers which add element to pool are protected
using write lock.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
rxe_prepare() is called on an skb which has ndev already initialized by
rxe_init_packet().
Therefore avoid querying the GID attribute again and use the available
netdevice from the skb->dev.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Tested-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In the commit 536ca245c5 ("IB/rxe: Drop QP0 silently"), if qpn is
zero, the function directly returns. So in the following function,
it is not necessary to check qpn. The qpn check in the function
check_keys is removed.
Fixes: 536ca245c5 ("IB/rxe: Drop QP0 silently")
CC: Srinivas Eeda <srinivas.eeda@oracle.com>
CC: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Select the source udp port number for a QP based on the
source QPN. This provides a better spread of traffic
across NIC RX queues for RC/UC QPs.
Signed-off-by: Vijay Immanuel <vijayi@attalasystems.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAltwm2geHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGITkH/iSzkVhT2OxHoir0
mLVzTi7/Z17L0e/ELl7TvAC0iLFlWZKdlGR0g3b4/QpXLPmNK4HxiDRTQuWn8ke0
qDZyDq89HqLt+mpeFZ43PCd9oqV8CH2xxK3iCWReqv6bNnowGnRpSStlks4rDqWn
zURC/5sUh7TzEG4s997RrrpnyPeQWUlf/Mhtzg2/WvK2btoLWgu5qzjX1uFh3s7u
vaF2NXVJ3X03gPktyxZzwtO1SwLFS1jhwUXWBZ5AnoJ99ywkghQnkqS/2YpekNTm
wFk80/78sU+d91aAqO8kkhHj8VRrd+9SGnZ4mB2aZHwjZjGcics4RRtxukSfOQ+6
L47IdXo=
=sJkt
-----END PGP SIGNATURE-----
Merge tag 'v4.18' into rdma.git for-next
Resolve merge conflicts from the -rc cycle against the rdma.git tree:
Conflicts:
drivers/infiniband/core/uverbs_cmd.c
- New ifs added to ib_uverbs_ex_create_flow in -rc and for-next
- Merge removal of file->ucontext in for-next with new code in -rc
drivers/infiniband/core/uverbs_main.c
- for-next removed code from ib_uverbs_write() that was modified
in for-rc
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Every function that returns COMPST_ERROR must set wqe->status to another
value than IB_WC_SUCCESS before returning COMPST_ERROR. Fix the only code
path for which this is not yet the case.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The proper return code is "-EOPNOTSUPP" when the create_srq() callback
is not supported.
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Since neither ib_post_send() nor ib_post_recv() modify the data structure
their second argument points at, declare that argument const. This change
makes it necessary to declare the 'bad_wr' argument const too and also to
modify all ULPs that call ib_post_send(), ib_post_recv() or
ib_post_srq_recv(). This patch does not change any functionality but makes
it possible for the compiler to verify whether the
ib_post_(send|recv|srq_recv) really do not modify the posted work request.
To make this possible, only one cast had to be introduce that casts away
constness, namely in rpcrdma_post_recvs(). The only way I can think of to
avoid that cast is to introduce an additional loop in that function or to
change the data type of bad_wr from struct ib_recv_wr ** into int
(an index that refers to an element in the work request list). However,
both approaches would require even more extensive changes than this
patch.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When posting a send work request, the work request that is posted is not
modified by any of the RDMA drivers. Make this explicit by constifying
most ib_send_wr pointers in RDMA transport drivers.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
According to "Annex A16: RDMA over Converged Ethernet (RoCE)":
A16.4.3 MANAGEMENT INTERFACES
As defined in the base specification, a special Queue Pair, QP0 is defined
solely for communication between subnet manager(s) and subnet management
agents. Since such an IB-defined subnet management architecture is outside
the scope of this annex, it follows that there is also no requirement that
a port which conforms to this annex be associated with a QP0. Thus, for
end nodes designed to conform to this annex, the concept of QP0 is
undefined and unused for any port connected to an Ethernet network.
CA16-8: A packet arriving at a RoCE port containing a BTH with the
destination QP field set to QP0 shall be silently dropped.
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Acked-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch not only simplifies the error handling code in rxe_create_ah()
but also removes the dead code that was left behind by commit 47ec386662
("RDMA: Convert drivers to use sgid_attr instead of sgid_index").
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Do not call sk_dst_set() on every packet transfer because
that calls sk_tx_queue_clear(), which clears the tx queue.
A QP must stay on the same tx queue to maintain packet order.
Signed-off-by: Vijay Immanuel <vijayi@attalasystems.com>
Acked-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Regression and crashing bug fixes:
- mlx4/5: Fixes for issues found from various checkers
- A resource tracking and uverbs regression in the core code
- qedr: NULL pointer regression found during testing
- rxe: Various small bugs
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=Gjuy
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"Here are eight fairly small fixes collected over the last two weeks.
Regression and crashing bug fixes:
- mlx4/5: Fixes for issues found from various checkers
- A resource tracking and uverbs regression in the core code
- qedr: NULL pointer regression found during testing
- rxe: Various small bugs"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
IB/rxe: Fix missing completion for mem_reg work requests
RDMA/core: Save kernel caller name when creating CQ using ib_create_cq()
IB/uverbs: Fix ordering of ucontext check in ib_uverbs_write
IB/mlx4: Fix an error handling path in 'mlx4_ib_rereg_user_mr()'
RDMA/qedr: Fix NULL pointer dereference when running over iWARP without RDMA-CM
IB/mlx5: Fix return value check in flow_counters_set_data()
IB/mlx5: Fix memory leak in mlx5_ib_create_flow
IB/rxe: avoid double kfree skb
This patch replaces the ib_device_attr.max_sge with max_send_sge and
max_recv_sge. It allows ulps to take advantage of devices that have very
different send and recv sge depths. For example cxgb4 has a max_recv_sge
of 4, yet a max_send_sge of 16. Splitting out these attributes allows
much more efficient use of the SQ for cxgb4 with ulps that use the RDMA_RW
API. Consider a large RDMA WRITE that has 16 scattergather entries.
With max_sge of 4, the ulp would send 4 WRITE WRs, but with max_sge of
16, it can be done with 1 WRITE WR.
Acked-by: Sagi Grimberg <sagi@grimberg.me>
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Before goto err2, the variable qp is checked. So it is not necessary
to check qp in label err2.
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Set the vlan flag and vlan_id field in the wc for rdma_listen()
to work over VLAN. This is required by ib_init_ah_attr_from_wc()
which is called by the CM REQ handler.
Signed-off-by: Vijay Immanuel <vijayi@attalasystems.com>
Reviewed-by: Yonatan Cohen <yonatanc@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Increase the max MR limit to support more I/O queues
for NVMe over Fabrics hosts.
Signed-off-by: Vijay Immanuel <vijayi@attalasystems.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Run the completer task to post a work completion after processing
a memory registration or invalidate work request. This covers the
case where the memory registration or invalidate was the last work
request posted to the qp.
Signed-off-by: Vijay Immanuel <vijayi@attalasystems.com>
Reviewed-by: Yonatan Cohen <yonatanc@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The core code now ensures that all driver callbacks that receive an
rdma_ah_attrs will have a sgid_attr's pointer if there is a GRH present.
Drivers can use this pointer instead of calling a query function with
sgid_index. This simplifies the drivers and also avoids races where a
gid_index lookup may return different data if it is changed.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Introduce AH attribute copy, move and replace APIs to be used by core and
provider drivers.
In CM code flow when ah attribute might be re-initialized twice while
processing incoming request, or initialized once while from path record
while sending out CM requests. Therefore use rdma_move_ah_attr API to
handle such scenarios instead of memcpy().
Provider drivers keeps a copy ah_attr during the lifetime of the ah.
Therefore, use rdma_replace_ah_attr() which conditionally release
reference to old ah_attr and holds reference to new attribute whose
referrence is released when the AH is freed.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
