Coccinelle reports a warning
WARNING: NULL check before dev_{put, hold} functions is not needed
The reason is the call netdev_{put, hold} of dev_{put,hold} will check NULL
There is no need to check before using dev_{put, hold}
Signed-off-by: Jules Irenge <jbi.octave@gmail.com>
Link: https://lore.kernel.org/r/ZjF1Eedxwhn4JSkz@octinomon.home
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Coccinelle reports a warning
WARNING: NULL check before dev_{put, hold} functions is not needed
The reason is the call netdev_{put, hold} of dev_{put,hold} will check NULL
There is no need to check before using dev_{put, hold}
Signed-off-by: Jules Irenge <jbi.octave@gmail.com>
Link: https://lore.kernel.org/r/ZjGDFatHRMI6Eg7M@octinomon.home
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Coccinelle reports a warning
WARNING: NULL check before dev_{put, hold} functions is not needed
The reason is the call netdev_{put, hold} of dev_{put,hold} will check NULL
There is no need to check before using dev_{put, hold}
Signed-off-by: Jules Irenge <jbi.octave@gmail.com>
Link: https://lore.kernel.org/r/ZjGC4qXrOwZE0aHi@octinomon.home
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Allow user to see driver-specific QPs (the "driver_detail" QPs)
through the rdmatool, when requested.
When creating DCT, DCI and REG_UMR QPs, we designate them as driver_detail
resources.
When filling the QP info for the rdma tool, for the driver_detail QPs:
-the QP type is IB_QPT_DRIVER
-the subtype is a string with the QP name ("DCT", "DCI", "REG_UMR")
Signed-off-by: Chiara Meiohas <cmeiohas@nvidia.com>
Link: https://lore.kernel.org/r/452432d7d0917f053a80a893a614169857fe3b10.1713268997.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Utilize the -dd flag (driver-specific details) in the rdmatool
to view driver-specific QPs which are not exposed yet.
Add the netlink attribute to mark request to convey driver details and
use it to return QP subtype as a string.
$ rdma resource show qp link ibp8s0f1
link ibp8s0f1/1 lqpn 360 type UD state RTS sq-psn 0 comm [mlx5_ib]
link ibp8s0f1/1 lqpn 0 type SMI state RTS sq-psn 0 comm [ib_core]
link ibp8s0f1/1 lqpn 1 type GSI state RTS sq-psn 0 comm [ib_core]
$ rdma resource show qp link ibp8s0f1 -dd
link ibp8s0f1/1 lqpn 360 type UD state RTS sq-psn 0 comm [mlx5_ib]
link ibp8s0f1/1 lqpn 465 type DRIVER subtype REG_UMR state RTS sq-psn 0 comm [mlx5_ib]
link ibp8s0f1/1 lqpn 0 type SMI state RTS sq-psn 0 comm [ib_core]
link ibp8s0f1/1 lqpn 1 type GSI state RTS sq-psn 0 comm [ib_core]
$ rdma resource show
0: ibp8s0f0: pd 3 cq 4 qp 3 cm_id 0 mr 0 ctx 0 srq 2
1: ibp8s0f1: pd 3 cq 4 qp 3 cm_id 0 mr 0 ctx 0 srq 2
$ rdma resource show -dd
0: ibp8s0f0: pd 3 cq 4 qp 4 cm_id 0 mr 0 ctx 0 srq 2
1: ibp8s0f1: pd 3 cq 4 qp 4 cm_id 0 mr 0 ctx 0 srq 2
Signed-off-by: Chiara Meiohas <cmeiohas@nvidia.com>
Link: https://lore.kernel.org/r/2607bb3ddec3cae3443c2ea19e9f700825d20a98.1713268997.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Add driver function to stop the device and release any active IRQs as
preparation for shutdown. This should fix issues caused by unexpected AQ
interrupts when booting kernel using kexec and possible data integrity
issues when the system is being shutdown during traffic.
Link: https://lore.kernel.org/r/20240425171814.25216-1-mrgolin@amazon.com
Reviewed-by: Firas Jahjah <firasj@amazon.com>
Reviewed-by: Yonatan Nachum <ynachum@amazon.com>
Signed-off-by: Michael Margolin <mrgolin@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
mlx5 has a built in self-test at driver startup to evaluate if the
platform supports write combining to generate a 64 byte PCIe TLP or
not. This has proven necessary because a lot of common scenarios end up
with broken write combining (especially inside virtual machines) and there
is other way to learn this information.
This self test has been consistently failing on new ARM64 CPU
designs (specifically with NVIDIA Grace's implementation of Neoverse
V2). The C loop around writeq() generates some pretty terrible ARM64
assembly, but historically this has worked on a lot of existing ARM64 CPUs
till now.
We see it succeed about 1 time in 10,000 on the worst effected
systems. The CPU architects speculate that the load instructions
interspersed with the stores makes the WC buffers statistically flush too
often and thus the generation of large TLPs becomes infrequent. This makes
the boot up test unreliable in that it indicates no write-combining,
however userspace would be fine since it uses a ST4 instruction.
Further, S390 has similar issues where only the special zpci_memcpy_toio()
will actually generate large TLPs, and the open coded loop does not
trigger it at all.
Fix both ARM64 and S390 by switching to __iowrite64_copy() which now
provides architecture specific variants that have a high change of
generating a large TLP with write combining. x86 continues to use a
similar writeq loop in the generate __iowrite64_copy().
Fixes: 11f552e217 ("IB/mlx5: Test write combining support")
Link: https://lore.kernel.org/r/6-v3-1893cd8b9369+1925-mlx5_arm_wc_jgg@nvidia.com
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Acked-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In some situations a sent packet may get queued in the NIC longer than
than timeout of a ULP. Currently if this happens the ULP may try to reset
the link by destroying the qp and setting up an alternate connection but
will fail because the rxe driver is waiting for the packet to finish
getting sent and be returned to the skb destructor function where the qp
reference holding things up will be dropped. This patch modifies the way
that the qp is passed to the destructor to pass the qp index and not a qp
pointer. Then the destructor will attempt to lookup the qp from its index
and if it fails exit early. This requires taking a reference on the struct
sock rather than the qp allowing the qp to be destroyed while the sk is
still around waiting for the packet to finish.
Link: https://lore.kernel.org/r/20240329145513.35381-15-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Currently the rxe_driver detects packet drops by ip_local_out() which
occur before the packet is sent on the wire and attempts to resend
them. This is redundant with the usual retry mechanism which covers
packets that get dropped in transit to or from the remote node.
The way this is implemented is not robust since it sets need_req_skb and
waits for the number of local skbs outstanding for this qp to drop below a
low water mark. This is racy since the skb may be sent to the destructor
before the requester can set the need_req_skb flag. This will cause a
deadlock in the send path for that qp.
This patch removes this mechanism since the normal retry path will correct
the error and resend the packet and it makes no difference if the packet
is dropped locally or later.
Link: https://lore.kernel.org/r/20240329145513.35381-14-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The rxe send path currently counts the number of skbs outstanding between
the rxe driver and the ethernet driver to prevent too many packets to
accumulate waiting to send. This patch makes the local loopback path
behave the same way. The loopback path forwards the packets to the receive
path which will eventually call kfree_skb on all packets and drop the qp
references. This makes the loopback path more useful for software testing.
Link: https://lore.kernel.org/r/20240329145513.35381-13-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In rxe_send() a ref is taken on the qp to keep it alive until the
kfree_skb() has a chance to call the skb destructor rxe_skb_tx_dtor()
which drops the reference. If the packet has an incorrect protocol the
error path just calls kfree_skb() which will call the destructor which
will drop the ref. Currently the driver also calls rxe_put() which is
incorrect. Additionally since the packets sent to rxe_send() are under the
control of the driver and it only ever produces IPV4 or IPV6 packets the
simplest fix is to remove all the code in this block.
Link: https://lore.kernel.org/r/20240329145513.35381-12-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Fixes: 9eb7f8e44d ("IB/rxe: Move refcounting earlier in rxe_send()")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Replace calls to rxe_run_task() with rxe_sched_task(). This prevents the
tasks from all running on the same cpu.
This change slightly reduces performance for single qp send and write
benchmarks in loopback mode but greatly improves the performance with
multiple qps because if run task is used all the work tends to be
performed on one cpu. For actual on the wire benchmarks there is no
noticeable performance change.
Link: https://lore.kernel.org/r/20240329145513.35381-11-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Instead of rescheduling rxe_requester from rxe_completer() just extend the
duration of rxe_sender() by one pass. Setting run_requester_again forces
rxe_completer() to return 0 which will cause rxe_sender() to be called at
least one more time.
Link: https://lore.kernel.org/r/20240329145513.35381-10-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Now that rxe_completer() is always called serially after rxe_requester()
there is no reason to schedule rxe_completer() from rxe_requester().
Link: https://lore.kernel.org/r/20240329145513.35381-9-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Now that req.task and comp.task are merged it is no longer necessary to
call save_state() before calling rxe_xmit_pkt() and rollback_state() if
rxe_xmit_pkt() fails. This was done originally to prevent races between
rxe_completer() and rxe_requester() which now cannot happen.
Link: https://lore.kernel.org/r/20240329145513.35381-8-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Currently the rxe driver has three work queue tasks per qp. These are the
req.task, comp.task and resp.task which call rxe_requester(),
rxe_completer() and rxe_responder() respectively directly or on work
queues. Each of these subroutines checks to see if there is work to be
performed on the send queue or on the response packet queue or the request
packet queue and will run until there is no work remaining or yield the
cpu and reschedule itself until there is no work remaining.
This commit combines the req.task and comp.task into a single send.task
and renames the resp.task to the recv.task. The combined send.task calls
rxe_requester() and rxe_completer() serially and continues until all work
on both the send queue and the response packet queue are done.
In various benchmarks the performance is either improved or left the
same. At high scale there is a significant reduction in the load on the
cpu.
This is the first step in combining these two tasks. Once they are
serialized cross rescheduling of req.task and comp.task can be more
efficiently handled by just letting the send.task continue to run. This
will be done in the next several patches.
Link: https://lore.kernel.org/r/20240329145513.35381-7-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In rxe_post_send_kernel() if the qp is in the error state after posting
the work requests the rxe_completer() task is scheduled.
But, the only way to move the qp into the error state is to call
rxe_qp_error() which also schedules the rxe_completer() task to drain the
queues. Calling it a second time has no effect. This commit removes the
redundant call.
Link: https://lore.kernel.org/r/20240329145513.35381-6-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
A previous commit incorrectly added an 'if(!err)' before scheduling the
requester task in rxe_post_send_kernel(). But if there were send wrs
successfully added to the send queue before a bad wr they might never get
executed.
This commit fixes this by scheduling the requester task if any wqes were
successfully posted in rxe_post_send_kernel() in rxe_verbs.c.
Link: https://lore.kernel.org/r/20240329145513.35381-5-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Fixes: 5bf944f241 ("RDMA/rxe: Add error messages")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In rxe_comp_queue_pkt() an incoming response packet skb is enqueued to the
resp_pkts queue and then a decision is made whether to run the completer
task inline or schedule it. Finally the skb is dereferenced to bump a 'hw'
performance counter. This is wrong because if the completer task is
already running in a separate thread it may have already processed the skb
and freed it which can cause a seg fault. This has been observed
infrequently in testing at high scale.
This patch fixes this by changing the order of enqueuing the packet until
after the counter is accessed.
Link: https://lore.kernel.org/r/20240329145513.35381-4-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Fixes: 0b1e5b99a4 ("IB/rxe: Add port protocol stats")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The existing behavior of ib_umad, which maintains received MAD
packets in an unbounded list, poses a risk of uncontrolled growth.
As user-space applications extract packets from this list, the rate
of extraction may not match the rate of incoming packets, leading
to potential list overflow.
To address this, we introduce a limit to the size of the list. After
considering typical scenarios, such as OpenSM processing, which can
handle approximately 100k packets per second, and the 1-second retry
timeout for most packets, we set the list size limit to 200k. Packets
received beyond this limit are dropped, assuming they are likely timed
out by the time they are handled by user-space.
Notably, packets queued on the receive list due to reasons like
timed-out sends are preserved even when the list is full.
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Reviewed-by: Mark Zhang <markzhang@nvidia.com>
Link: https://lore.kernel.org/r/7197cb58a7d9e78399008f25036205ceab07fbd5.1713268818.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Too much print may lead to a panic in kernel. Change ibdev_err() to
ibdev_err_ratelimited(), and change the printing level of cqe dump
to debug level.
Fixes: 7c044adca2 ("RDMA/hns: Simplify the cqe code of poll cq")
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20240412091616.370789-11-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Use complete parentheses to ensure that macro expansion does
not produce unexpected results.
Fixes: a25d13cbe8 ("RDMA/hns: Add the interfaces to support multi hop addressing for the contexts in hip08")
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20240412091616.370789-10-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
GMV's BA table only supports 4K pages. Currently, PAGESIZE is used to
calculate gmv_bt_num, which will cause an abnormal number of gmv_bt_num
in a 64K OS.
Fixes: d6d91e4621 ("RDMA/hns: Add support for configuring GMV table")
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20240412091616.370789-8-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
When dma_alloc_coherent() fails in hns_roce_alloc_hem(), just call
kfree() to release hem instead of hns_roce_free_hem().
Fixes: c00743cbf2 ("RDMA/hns: Simplify 'struct hns_roce_hem' allocation")
Signed-off-by: wenglianfa <wenglianfa@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20240412091616.370789-7-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The refcount of CQ is not protected by locks. When CQ asynchronous
events and CQ destruction are concurrent, CQ may have been released,
which will cause UAF.
Use the xa_lock() to protect the CQ refcount.
Fixes: 9a4435375c ("IB/hns: Add driver files for hns RoCE driver")
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20240412091616.370789-6-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
As described in the ib_map_mr_sg function comment, it returns the number
of sg elements that were mapped to the memory region. However,
hns_roce_map_mr_sg returns the number of pages required for mapping the
DMA area. Fix it.
Fixes: 9b2cf76c9f ("RDMA/hns: Optimize PBL buffer allocation process")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20240411033851.2884771-1-shaozhengchao@huawei.com
Reviewed-by: Junxian Huang <huangjunxian6@hisilicon.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Set netdev and RoCEv2 flag to enable GID population on port 1.
Use GIDs of the master netdev. As mc->ports[] stores slave devices,
use a helper to get the master netdev.
Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com>
Link: https://lore.kernel.org/r/1712738551-22075-5-git-send-email-kotaranov@linux.microsoft.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
In the function __rxe_add_to_pool, the function xa_alloc_cyclic is
called. The return value of the function xa_alloc_cyclic is as below:
"
Return: 0 if the allocation succeeded without wrapping. 1 if the
allocation succeeded after wrapping, -ENOMEM if memory could not be
allocated or -EBUSY if there are no free entries in @limit.
"
But now the function __rxe_add_to_pool only returns -EINVAL. All the
returned error value should be returned to the caller.
Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Link: https://lore.kernel.org/r/20240408142142.792413-1-yanjun.zhu@linux.dev
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The "struct mana_cfg_rx_steer_req_v2" uses a dynamically sized set of
trailing elements. Specifically, it uses a "mana_handle_t" array. So,
use the preferred way in the kernel declaring a flexible array [1].
At the same time, prepare for the coming implementation by GCC and Clang
of the __counted_by attribute. Flexible array members annotated with
__counted_by can have their accesses bounds-checked at run-time via
CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE (for
strcpy/memcpy-family functions).
Also, avoid the open-coded arithmetic in the memory allocator functions
[2] using the "struct_size" macro.
Moreover, use the "offsetof" helper to get the indirect table offset
instead of the "sizeof" operator and avoid the open-coded arithmetic in
pointers using the new flex member. This new structure member also allow
us to remove the "req_indir_tab" variable since it is no longer needed.
Now, it is also possible to use the "flex_array_size" helper to compute
the size of these trailing elements in the "memcpy" function.
Specifically, the first commit adds the flex member and the patches 2
and 3 refactor the consumers of the "struct mana_cfg_rx_steer_req_v2".
This code was detected with the help of Coccinelle, and audited and
modified manually. The Coccinelle script used to detect this code
pattern is the following:
virtual report
@rule1@
type t1;
type t2;
identifier i0;
identifier i1;
identifier i2;
identifier ALLOC =~
"kmalloc|kzalloc|kmalloc_node|kzalloc_node|vmalloc|vzalloc|kvmalloc|kvzalloc";
position p1;
@@
i0 = sizeof(t1) + sizeof(t2) * i1;
...
i2 = ALLOC@p1(..., i0, ...);
@script:python depends on report@
p1 << rule1.p1;
@@
msg = "WARNING: verify allocation on line %s" % (p1[0].line)
coccilib.report.print_report(p1[0],msg)
[1] https://www.kernel.org/doc/html/next/process/deprecated.html#zero-length-and-one-element-arrays
[2] https://www.kernel.org/doc/html/next/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments
Link: https://lore.kernel.org/all/AS8PR02MB72374BD1B23728F2E3C3B1A18B022@AS8PR02MB7237.eurprd02.prod.outlook.com
Signed-off-by: Erick Archer <erick.archer@outlook.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
* mana-ib-flex:
net: mana: Avoid open coded arithmetic
RDMA/mana_ib: Prefer struct_size over open coded arithmetic
net: mana: Add flex array to struct mana_cfg_rx_steer_req_v2
This is an effort to get rid of all multiplications from allocation
functions in order to prevent integer overflows [1][2].
As the "req" variable is a pointer to "struct mana_cfg_rx_steer_req_v2"
and this structure ends in a flexible array:
struct mana_cfg_rx_steer_req_v2 {
[...]
mana_handle_t indir_tab[] __counted_by(num_indir_entries);
};
the preferred way in the kernel is to use the struct_size() helper to
do the arithmetic instead of the calculation "size + size * count" in
the kzalloc() function.
Moreover, use the "offsetof" helper to get the indirect table offset
instead of the "sizeof" operator and avoid the open-coded arithmetic in
pointers using the new flex member. This new structure member also allow
us to remove the "req_indir_tab" variable since it is no longer needed.
This way, the code is more readable and safer.
This code was detected with the help of Coccinelle, and audited and
modified manually.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments [1]
Link: https://github.com/KSPP/linux/issues/160 [2]
Signed-off-by: Erick Archer <erick.archer@outlook.com>
Link: https://lore.kernel.org/r/AS8PR02MB72375EB06EE1A84A67BE722E8B022@AS8PR02MB7237.eurprd02.prod.outlook.com
Reviewed-by: Long Li <longli@microsoft.com>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Add support for DSCP configuration. For DSCP, get dscp-prio mapping
via hns3 nic driver api .get_dscp_prio() and fill the SL (in WQE for
UD or in QPC for RC) with the priority value. The prio-tc mapping is
configured to HW by hns3 nic driver. HW will select a corresponding
TC according to SL and the prio-tc mapping.
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20240315093551.1650088-1-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Currently IB_ACCESS_REMOTE_ATOMIC is blocked from being updated via UMR
although in some cases it should be possible. These cases are checked in
mlx5r_umr_can_reconfig function.
Fixes: ef3642c4f5 ("RDMA/mlx5: Fix error unwinds for rereg_mr")
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Link: https://lore.kernel.org/r/24dac73e2fa48cb806f33a932d97f3e402a5ea2c.1712140377.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
umem can be NULL for user application mkeys in some cases. Therefore
umem can't be used for checking if the mkey is cacheable and it is
changed for checking a flag that indicates it. Also make sure that
all mkeys which are not returned to the cache will be destroyed.
Fixes: dd1b913fb0 ("RDMA/mlx5: Cache all user cacheable mkeys on dereg MR flow")
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Link: https://lore.kernel.org/r/2690bc5c6896bcb937f89af16a1ff0343a7ab3d0.1712140377.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
As some mkeys can't be modified with UMR due to some UMR limitations,
like the size of translation that can be updated, not all user mkeys can
be cached.
Fixes: dd1b913fb0 ("RDMA/mlx5: Cache all user cacheable mkeys on dereg MR flow")
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Link: https://lore.kernel.org/r/f2742dd934ed73b2d32c66afb8e91b823063880c.1712140377.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
