While SDHCI claims to support 64-bit DMA on MSM8916 it does not seem to
be properly functional. It is not immediately obvious because SDHCI is
usually used with IOMMU bypassed on this SoC, and all physical memory
has 32-bit addresses. But when trying to enable the IOMMU it quickly
fails with an error such as the following:
arm-smmu 1e00000.iommu: Unhandled context fault:
fsr=0x402, iova=0xfffff200, fsynr=0xe0000, cbfrsynra=0x140, cb=3
mmc1: ADMA error: 0x02000000
mmc1: sdhci: ============ SDHCI REGISTER DUMP ===========
mmc1: sdhci: Sys addr: 0x00000000 | Version: 0x00002e02
mmc1: sdhci: Blk size: 0x00000008 | Blk cnt: 0x00000000
mmc1: sdhci: Argument: 0x00000000 | Trn mode: 0x00000013
mmc1: sdhci: Present: 0x03f80206 | Host ctl: 0x00000019
mmc1: sdhci: Power: 0x0000000f | Blk gap: 0x00000000
mmc1: sdhci: Wake-up: 0x00000000 | Clock: 0x00000007
mmc1: sdhci: Timeout: 0x0000000a | Int stat: 0x00000001
mmc1: sdhci: Int enab: 0x03ff900b | Sig enab: 0x03ff100b
mmc1: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000000
mmc1: sdhci: Caps: 0x322dc8b2 | Caps_1: 0x00008007
mmc1: sdhci: Cmd: 0x0000333a | Max curr: 0x00000000
mmc1: sdhci: Resp[0]: 0x00000920 | Resp[1]: 0x5b590000
mmc1: sdhci: Resp[2]: 0xe6487f80 | Resp[3]: 0x0a404094
mmc1: sdhci: Host ctl2: 0x00000008
mmc1: sdhci: ADMA Err: 0x00000001 | ADMA Ptr: 0x0000000ffffff224
mmc1: sdhci_msm: ----------- VENDOR REGISTER DUMP -----------
mmc1: sdhci_msm: DLL sts: 0x00000000 | DLL cfg: 0x60006400 | DLL cfg2: 0x00000000
mmc1: sdhci_msm: DLL cfg3: 0x00000000 | DLL usr ctl: 0x00000000 | DDR cfg: 0x00000000
mmc1: sdhci_msm: Vndr func: 0x00018a9c | Vndr func2 : 0xf88018a8 Vndr func3: 0x00000000
mmc1: sdhci: ============================================
mmc1: sdhci: fffffffff200: DMA 0x0000ffffffffe100, LEN 0x0008, Attr=0x21
mmc1: sdhci: fffffffff20c: DMA 0x0000000000000000, LEN 0x0000, Attr=0x03
Looking closely it's obvious that only the 32-bit part of the address
(0xfffff200) arrives at the SMMU, the higher 16-bit (0xffff...) get
lost somewhere. This might not be a limitation of the SDHCI itself but
perhaps the bus/interconnect it is connected to, or even the connection
to the SMMU.
Work around this by setting SDHCI_QUIRK2_BROKEN_64_BIT_DMA to avoid
using 64-bit addresses.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230518-msm8916-64bit-v1-1-5694b0f35211@gerhold.net
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
We may get an empty response with zero length at the beginning of
the driver start and get following UBSAN error. Since there is no
content(SDRT_NONE) for the response, just return and skip the response
handling to avoid this problem.
Test pass : SDIO wifi throughput test with this patch
[ 126.980684] UBSAN: array-index-out-of-bounds in drivers/mmc/host/vub300.c:1719:12
[ 126.980709] index -1 is out of range for type 'u32 [4]'
[ 126.980729] CPU: 4 PID: 9 Comm: kworker/u16:0 Tainted: G E 6.3.0-rc4-mtk-local-202304272142 #1
[ 126.980754] Hardware name: Intel(R) Client Systems NUC8i7BEH/NUC8BEB, BIOS BECFL357.86A.0081.2020.0504.1834 05/04/2020
[ 126.980770] Workqueue: kvub300c vub300_cmndwork_thread [vub300]
[ 126.980833] Call Trace:
[ 126.980845] <TASK>
[ 126.980860] dump_stack_lvl+0x48/0x70
[ 126.980895] dump_stack+0x10/0x20
[ 126.980916] ubsan_epilogue+0x9/0x40
[ 126.980944] __ubsan_handle_out_of_bounds+0x70/0x90
[ 126.980979] vub300_cmndwork_thread+0x58e7/0x5e10 [vub300]
[ 126.981018] ? _raw_spin_unlock+0x18/0x40
[ 126.981042] ? finish_task_switch+0x175/0x6f0
[ 126.981070] ? __switch_to+0x42e/0xda0
[ 126.981089] ? __switch_to_asm+0x3a/0x80
[ 126.981129] ? __pfx_vub300_cmndwork_thread+0x10/0x10 [vub300]
[ 126.981174] ? __kasan_check_read+0x11/0x20
[ 126.981204] process_one_work+0x7ee/0x13d0
[ 126.981246] worker_thread+0x53c/0x1240
[ 126.981291] kthread+0x2b8/0x370
[ 126.981312] ? __pfx_worker_thread+0x10/0x10
[ 126.981336] ? __pfx_kthread+0x10/0x10
[ 126.981359] ret_from_fork+0x29/0x50
[ 126.981400] </TASK>
Fixes: 88095e7b47 ("mmc: Add new VUB300 USB-to-SD/SDIO/MMC driver")
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/048cd6972c50c33c2e8f81d5228fed928519918b.1683987673.git.deren.wu@mediatek.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
After commit 1ed5c3b22f ("mmc: sdhci-esdhc-imx: Propagate
ESDHC_FLAG_HS400* only on 8bit bus"), the property "no-mmc-hs400"
from device tree file do not work any more.
This patch reorder the code, which can avoid the warning message
"drop HS400 support since no 8-bit bus" and also make the property
"no-mmc-hs400" from dts file works.
Fixes: 1ed5c3b22f ("mmc: sdhci-esdhc-imx: Propagate ESDHC_FLAG_HS400* only on 8bit bus")
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230504112222.3599602-1-haibo.chen@nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
If devm_reset_control_get_optional_exclusive() fails, some resources still
need to be released. So branch to the error handling path instead of
returning directly.
Fixes: aad53d4ee7 ("mmc: sdhci-cadence: Support mmc hardware reset")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Brad Larson <blarson@amd.com>
Link: https://lore.kernel.org/r/f61599a9ef23767c2d66e5af9c975f05ef1cec6b.1682430069.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add support for mmc hardware reset using a reset-controller
that would need to be enabled in the device tree with
a supporting driver. The default is disabled for all
existing designs.
Signed-off-by: Brad Larson <blarson@amd.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20230410184526.15990-15-blarson@amd.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add support for AMD Pensando Elba SoC which explicitly
controls byte-lane enables on writes.
Select MMC_SDHCI_IO_ACCESSORS for MMC_SDHCI_CADENCE which
allows Elba SoC sdhci_elba_ops to overwrite the SDHCI
IO memory accessors
Signed-off-by: Brad Larson <blarson@amd.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20230410184526.15990-14-blarson@amd.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Move struct sdhci_pltfm_data under new struct sdhci_cdns_drv_data.
Add an init() into sdhci_cdns_drv_data for platform specific device
initialization in the device probe which is not used for existing devices.
Signed-off-by: Brad Larson <blarson@amd.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20230410184526.15990-13-blarson@amd.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
SoCs with device specific Cadence implementation, such as setting
byte-enables before the write, need to override writel(). Add a
callback where the default is writel() for all existing chips.
Signed-off-by: Brad Larson <blarson@amd.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20230410184526.15990-12-blarson@amd.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Clock delay settings are not defined for 400KHz, so add frequency check
to skip calling the clock delay settings when frequency is <=400KHz.
Signed-off-by: Sai Krishna Potthuri <sai.krishna.potthuri@amd.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20230403102551.3763054-4-sai.krishna.potthuri@amd.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add support for eMMC5.1 on Xilinx Versal Net platform
- Add new compatible string(xlnx,versal-net-emmc).
- Add support for PHY which is part of Host Controller register space.
- Add DLL and Delay Chain mode support and corresponding tap delays for
all eMMC modes.
- Add Strobe select tap for HS400 mode.
Signed-off-by: Swati Agarwal <swati.agarwal@amd.com>
Co-developed-by: Sai Krishna Potthuri <sai.krishna.potthuri@amd.com>
Signed-off-by: Sai Krishna Potthuri <sai.krishna.potthuri@amd.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20230403102551.3763054-3-sai.krishna.potthuri@amd.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Merge the mmc fixes for v6.3-rc[n] into the next branch, to allow them to
get tested together with the new mmc changes that are targeted for v6.4.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
If spec_reg is equal to 'SDHCI_PRESENT_STATE', esdhc_readl_fixup()
fixes up register value and returns it immediately. As a result, the
further block
(spec_reg == SDHCI_PRESENT_STATE)
&&(esdhc->quirk_ignore_data_inhibit == true),
is never executed.
The patch merges the second block into the first one.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 1f1929f3f2 ("mmc: sdhci-of-esdhc: add quirk to ignore command inhibit for data")
Signed-off-by: Georgii Kruglov <georgy.kruglov@yandex.ru>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20230321203715.3975-1-georgy.kruglov@yandex.ru
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
clang with W=1 reports
drivers/mmc/host/sdricoh_cs.c:104:28: error: unused function
'sdricoh_readw' [-Werror,-Wunused-function]
static inline unsigned int sdricoh_readw(struct sdricoh_host *host,
^
This function is not used, so remove it.
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20230319164744.1707169-1-trix@redhat.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Remove Thunder Bay specific code as the product got cancelled
and there are no end customers or users.
Signed-off-by: A, Rashmi <rashmi.a@intel.com>
Reviewed-by: Hunter, Adrian <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20230316120549.21486-2-rashmi.a@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Timing Information in Datasheet assumes that HIGH_SPEED_ENA=1 should be
set for SDR12 and SDR25 modes. But sdhci_am654 driver clears
HIGH_SPEED_ENA register. Thus, Modify sdhci_am654 to not clear
HIGH_SPEED_ENA (HOST_CONTROL[2]) bit for SDR12 and SDR25 speed modes.
Fixes: e374e87538 ("mmc: sdhci_am654: Clear HISPD_ENA in some lower speed modes")
Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230317092711.660897-1-b-kapoor@ti.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
According to commit 890cc39a87 ("drivers: provide
devm_platform_get_and_ioremap_resource()"), convert
platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230315055355.66733-1-yang.lee@linux.alibaba.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
According to commit 890cc39a87 ("drivers: provide
devm_platform_get_and_ioremap_resource()"), convert
platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20230315055023.61779-1-yang.lee@linux.alibaba.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
According to commit 890cc39a87 ("drivers: provide
devm_platform_get_and_ioremap_resource()"), convert
platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://lore.kernel.org/r/20230315054113.48898-1-yang.lee@linux.alibaba.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
According to commit 890cc39a87 ("drivers: provide
devm_platform_get_and_ioremap_resource()"), convert
platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230315053434.38316-1-yang.lee@linux.alibaba.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
According to commit 890cc39a87 ("drivers: provide
devm_platform_get_and_ioremap_resource()"), convert
platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230315053127.33855-1-yang.lee@linux.alibaba.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
According to commit 890cc39a87 ("drivers: provide
devm_platform_get_and_ioremap_resource()"), convert
platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230315052231.21212-1-yang.lee@linux.alibaba.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The sdhci_get_compatibility() uses OF functions which have stubs for !OF
case, thus entire CONFIG_OF ifdef can be dropped. This also fixes
!CONFIG_OF W=1 warning:
drivers/mmc/host/sdhci-pltfm.c:76:6: error: no previous prototype for ‘sdhci_get_compatibility’ [-Werror=missing-prototypes]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20230314203901.20803-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Use new helpers mmc_regulator_enable/disable_vqmmc to simplify
the code.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/2ceb62da-07e6-bafc-c29e-13cc1cdde93a@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
After 087592395a96 ("mmc: core: Allow invalid regulator in
mmc_regulator_set_ocr()") we can remove the checks here.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/858a592b-ebf4-99b4-74fc-21b4ad3382f8@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties.
Convert reading boolean properties to to of_property_read_bool().
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230310144715.1543836-1-robh@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties. As
part of this, convert of_get_property/of_find_property calls to the
recently added of_property_present() helper when we just want to test
for presence of a property and nothing more.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230310144714.1543767-1-robh@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Currently .get_max_clock returns the current clock rate for cclk_emmc
on rk35xx, thus max clock gets set to whatever bootloader set it to.
In case of u-boot, it is intentionally reset to 50 MHz if it boots
from eMMC, see mmc_deinit() in u-boot sources. As a result, HS200 and
HS400 modes are never selected by Linux, because dwcmshc_rk35xx_postinit
clears appropriate caps if host->mmc->f_max is < 52MHz
cclk_emmc is not a fixed clock on rk35xx, so using
sdhci_pltfm_clk_get_max_clock is not appropriate here.
Implement rk35xx_get_max_clock that returns actual max clock for cclk_emmc.
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20230310010349.509132-1-anarsoul@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
R-Car H3 ES1.* was only available to an internal development group and
needed a lot of quirks and workarounds. These become a maintenance
burden now, so our development group decided to remove upstream support
and disable booting for this SoC. Public users only have ES2 onwards.
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20230307163041.3815-9-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add support to read the optional "gate" clock property and request the
clock which will be used to ungate the DLL clock.
For Xilinx platforms which has DLL module, dll clock must be
ungated/enabled when SD controller operates at higher frequencies like 50
MHz, 100 MHz and 200 MHz. This will be done by explicitly requesting gate
clock from the driver.
Signed-off-by: Swati Agarwal <swati.agarwal@amd.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20230223141402.23979-1-swati.agarwal@amd.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Fix a bug by making sure prev_err doesn't get used when being
uninitialized.
Signed-off-by: William Qiu <william.qiu@starfivetech.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Fixes: 9e622229bb ("mmc: starfive: Add sdio/emmc driver support")
Link: https://lore.kernel.org/r/20230307024646.10216-3-william.qiu@starfivetech.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Lower the power-on failed message severity from warn to info when the
controller does not power-up. It's normal to have this situation when
the SD card slot is empty, therefore we should not warn the user about
it.
Fixes: 7ca0f166f5 ("mmc: sdhci_am654: Add workaround for card detect debounce timer")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230306162751.163369-1-francesco@dolcini.it
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
As usual, there are lots of minor driver changes across SoC platforms
from NXP, Amlogic, AMD Zynq, Mediatek, Qualcomm, Apple and Samsung.
These usually add support for additional chip variations in existing
drivers, but also add features or bugfixes.
The SCMI firmware subsystem gains a unified raw userspace interface
through debugfs, which can be used for validation purposes.
Newly added drivers include:
- New power management drivers for StarFive JH7110, Allwinner D1 and
Renesas RZ/V2M
- A driver for Qualcomm battery and power supply status
- A SoC device driver for identifying Nuvoton WPCM450 chips
- A regulator coupler driver for Mediatek MT81xxv
-----BEGIN PGP SIGNATURE-----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=p6Xp
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"As usual, there are lots of minor driver changes across SoC platforms
from NXP, Amlogic, AMD Zynq, Mediatek, Qualcomm, Apple and Samsung.
These usually add support for additional chip variations in existing
drivers, but also add features or bugfixes.
The SCMI firmware subsystem gains a unified raw userspace interface
through debugfs, which can be used for validation purposes.
Newly added drivers include:
- New power management drivers for StarFive JH7110, Allwinner D1 and
Renesas RZ/V2M
- A driver for Qualcomm battery and power supply status
- A SoC device driver for identifying Nuvoton WPCM450 chips
- A regulator coupler driver for Mediatek MT81xxv"
* tag 'soc-drivers-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits)
power: supply: Introduce Qualcomm PMIC GLINK power supply
soc: apple: rtkit: Do not copy the reg state structure to the stack
soc: sunxi: SUN20I_PPU should depend on PM
memory: renesas-rpc-if: Remove redundant division of dummy
soc: qcom: socinfo: Add IDs for IPQ5332 and its variant
dt-bindings: arm: qcom,ids: Add IDs for IPQ5332 and its variant
dt-bindings: power: qcom,rpmpd: add RPMH_REGULATOR_LEVEL_LOW_SVS_L1
firmware: qcom_scm: Move qcom_scm.h to include/linux/firmware/qcom/
MAINTAINERS: Update qcom CPR maintainer entry
dt-bindings: firmware: document Qualcomm SM8550 SCM
dt-bindings: firmware: qcom,scm: add qcom,scm-sa8775p compatible
soc: qcom: socinfo: Add Soc IDs for IPQ8064 and variants
dt-bindings: arm: qcom,ids: Add Soc IDs for IPQ8064 and variants
soc: qcom: socinfo: Add support for new field in revision 17
soc: qcom: smd-rpm: Add IPQ9574 compatible
soc: qcom: pmic_glink: remove redundant calculation of svid
soc: qcom: stats: Populate all subsystem debugfs files
dt-bindings: soc: qcom,rpmh-rsc: Update to allow for generic nodes
soc: qcom: pmic_glink: add CONFIG_NET/CONFIG_OF dependencies
soc: qcom: pmic_glink: Introduce altmode support
...
- Extend slot-gpio to be used for host specific card detect interrupts
- Align to common busy polling behaviour for mmc ioctls
- Suggest the BFQ I/O scheduler to be built along with MMC/SD support
- Add devm_mmc_alloc_host() to enable further cleanups in host drivers
MMC host:
- atmel-mci: Fix race condition when stopping/starting a command
- dw_mmc-starfive: Add new driver to support the StarFive JH7110 variant
- dw_mmc-rockchip: Add support for the RK3588 variant
- jz4740: Add support for the vqmmc power supply
- meson-gx: Convert the DT bindings to the dt-schema
- meson-gx: Enable the platform interrupt to be used for card detect
- moxart: Set the supported maximum request/block/segment sizes
- renesas,sdhi: Add support for the RZ/V2M variants
- sdhci: Rework code to drop SDHCI_QUIRK_MISSING_CAPS
- sdhci-esdhc-imx: Improve tuning logic support
- sdhci-msm: Add support for the IPQ5332 and the IPQ9574 variants
- sdhci-of-dwcmshc: Add the missing device table IDs for acpi
- sdhci-of-dwcmshc: Improve clock support for the Rockchip variant
- sdhci-of-dwcmshc: Enable support of V4 host for the BlueField-3 variant
- sdhci-pxav2: Add support for the PXA168 V1 variant
- sdhci-pxav2: Add support for SDIO IRQs for the PXA168 V1 variant
- uniphier-sd: Add support for SD UHS-I speed modes
-----BEGIN PGP SIGNATURE-----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=CF/8
-----END PGP SIGNATURE-----
Merge tag 'mmc-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC updates from Ulf Hansson:
"MMC core:
- Extend slot-gpio to be used for host specific card detect interrupts
- Align to common busy polling behaviour for mmc ioctls
- Suggest the BFQ I/O scheduler to be built along with MMC/SD support
- Add devm_mmc_alloc_host() to enable further cleanups in host drivers
MMC host:
- atmel-mci: Fix race condition when stopping/starting a command
- dw_mmc-starfive: Add new driver to support the StarFive JH7110 variant
- dw_mmc-rockchip: Add support for the RK3588 variant
- jz4740: Add support for the vqmmc power supply
- meson-gx: Convert the DT bindings to the dt-schema
- meson-gx: Enable the platform interrupt to be used for card detect
- moxart: Set the supported maximum request/block/segment sizes
- renesas,sdhi: Add support for the RZ/V2M variants
- sdhci: Rework code to drop SDHCI_QUIRK_MISSING_CAPS
- sdhci-esdhc-imx: Improve tuning logic support
- sdhci-msm: Add support for the IPQ5332 and the IPQ9574 variants
- sdhci-of-dwcmshc: Add the missing device table IDs for acpi
- sdhci-of-dwcmshc: Improve clock support for the Rockchip variant
- sdhci-of-dwcmshc: Enable support of V4 host for the BlueField-3 variant
- sdhci-pxav2: Add support for the PXA168 V1 variant
- sdhci-pxav2: Add support for SDIO IRQs for the PXA168 V1 variant
- uniphier-sd: Add support for SD UHS-I speed modes"
* tag 'mmc-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (59 commits)
mmc: meson-gx: Use devm_platform_get_and_ioremap_resource()
mmc: meson-gx: constify member data of struct meson_host
mmc: meson-gx: use devm_clk_get_enabled() for core clock
mmc: core: fix return value check in devm_mmc_alloc_host()
dt-bindings: mmc: meson-gx: fix interrupt binding
mmc: meson-gx: support platform interrupt as card detect interrupt
dt-bindings: mmc: meson-gx: support specifying cd interrupt
mmc: core: support setting card detect interrupt from drivers
mmc: starfive: Add sdio/emmc driver support
dt-bindings: mmc: Add StarFive MMC module
dt-bindings: mmc: sdhci-msm: Allow 1 icc path
dt-bindings: mmc: rockchip-dw-mshc: Add RK3588 compatible string
mmc: core: Align to common busy polling behaviour for mmc ioctls
dt-bindings: mmc: Add resets property to cadence SDHCI binding
mmc: meson-gx: remove meson_mmc_get_cd
mmc: moxart: set maximum request/block/segment sizes
mmc: sdhci-brcmstb: Use devm_platform_get_and_ioremap_resource()
mmc: sdhci-of-dwcmshc: add the missing device table IDs for acpi
mmc: sdhci-of-dwcmshc: Update DLL and pre-change delay for rockchip platform
mmc: jz4740: Add support for vqmmc power supply
...
This is a follow-up to the deprecation of most of the old-style board
files that was merged in linux-6.0, removing them for good.
This branch is almost exclusively dead code removal based on those
annotations. Some device driver removals went through separate subsystem
trees, but the majority is in the same branch, in order to better handle
dependencies between the patches and avoid breaking bisection.
Unfortunately that leads to merge conflicts against other changes in the
subsystem trees, but they should all be trivial to resolve by removing
the files.
See commit 7d0d3fa733 ("Merge tag 'arm-boardfiles-6.0' of
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc") for the
description of which machines were marked unused and are now removed. The
only removals that got postponed are Terastation WXL (mv78xx0) and
Jornada720 (StrongARM1100), which turned out to still have potential
users.
-----BEGIN PGP SIGNATURE-----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=WejQ
-----END PGP SIGNATURE-----
Merge tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC boardfile updates from Arnd Bergmann
"Unused boardfile removal for 6.3
This is a follow-up to the deprecation of most of the old-style board
files that was merged in linux-6.0, removing them for good.
This branch is almost exclusively dead code removal based on those
annotations. Some device driver removals went through separate
subsystem trees, but the majority is in the same branch, in order to
better handle dependencies between the patches and avoid breaking
bisection.
Unfortunately that leads to merge conflicts against other changes in
the subsystem trees, but they should all be trivial to resolve by
removing the files.
See commit 7d0d3fa733 ("Merge tag 'arm-boardfiles-6.0' of
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc") for the
description of which machines were marked unused and are now removed.
The only removals that got postponed are Terastation WXL (mv78xx0) and
Jornada720 (StrongARM1100), which turned out to still have potential
users"
* tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (91 commits)
mmc: omap: drop TPS65010 dependency
ARM: pxa: restore mfp-pxa320.h
usb: ohci-omap: avoid unused-variable warning
ARM: debug: remove references in DEBUG_UART_8250_SHIFT to removed configs
ARM: s3c: remove obsolete s3c-cpu-freq header
MAINTAINERS: adjust SAMSUNG SOC CLOCK DRIVERS after s3c24xx support removal
MAINTAINERS: update file entries after arm multi-platform rework and mach-pxa removal
ARM: remove CONFIG_UNUSED_BOARD_FILES
mfd: remove htc-pasic3 driver
w1: remove ds1wm driver
usb: remove ohci-tmio driver
fbdev: remove w100fb driver
fbdev: remove tmiofb driver
mmc: remove tmio_mmc driver
mfd: remove ucb1400 support
mfd: remove toshiba tmio drivers
rtc: remove v3020 driver
power: remove pda_power supply driver
ASoC: pxa: remove unused board support
pcmcia: remove unused pxa/sa1100 drivers
...
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230217083005.128668-1-yang.lee@linux.alibaba.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Constify member data of struct meson_host. This also allows to remove
the cast as of_device_get_match_data() returns a const void *.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/70e5520f-e327-111d-9ea4-824460e41561@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
MMC core only checks whether return value of .get_cd() equals zero.
Therefore -ENOSYS and 1 are effectively the same and the function
can be removed.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/16502040-3beb-a3cc-b28d-28184fba0f10@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Per datasheet: maximum block length is 2048 bytes,
data length field is in bits 0-23 of the Data Length Register.
Also for DMA mode we have to take into account rx/tx buffers' sizes.
In my tests this change doubles SD card I/O performance on big files.
Before the change Linux used default request size of 4 KB.
Signed-off-by: Sergei Antonov <saproj@gmail.com>
Link: https://lore.kernel.org/r/20230210143843.369943-1-saproj@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Ye Xingchen <ye.xingchen@zte.com.cn>
Link: https://lore.kernel.org/r/202302101628321403257@zte.com.cn
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
For Rockchip platform, DLL bypass bit and start bit need to be set if
DLL is not locked. And adjust pre-change delay to 0x3 for better signal
test result.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Link: https://lore.kernel.org/r/1675298118-64243-2-git-send-email-shawn.lin@rock-chips.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Support enabling / disabling the vqmmc power supply if it was provided
by the firmware.
Provide the .start_signal_voltage_switch callback to change the voltage
of the external vqmmc power supply.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20230131210229.68129-2-paul@crapouillou.net
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Merge the mmc fixes for v6.2-rc[n] into the next branch, to allow them to
get tested together with the new mmc changes that are targeted for v6.3.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
On JZ4760 and JZ4760B, SD cards fail to run if the maximum clock
rate is set to 50 MHz, even though the controller officially does
support it.
Until the actual bug is found and fixed, limit the maximum clock rate to
24 MHz.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230131210229.68129-1-paul@crapouillou.net
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
