Commit Graph

56 Commits

Author SHA1 Message Date
Linus Torvalds
e1288cd72f Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: (63 commits)
  ARM: PL08x: cleanup comments
  Update CONFIG_MD_RAID6_PQ to CONFIG_RAID6_PQ in drivers/dma/iop-adma.c
  ARM: PL08x: fix a warning
  Fix dmaengine_submit() return type
  dmaengine: at_hdmac: fix race while monitoring channel status
  dmaengine: at_hdmac: flags located in first descriptor
  dmaengine: at_hdmac: use subsys_initcall instead of module_init
  dmaengine: at_hdmac: no need set ACK in new descriptor
  dmaengine: at_hdmac: trivial add precision to unmapping comment
  dmaengine: at_hdmac: use dma_address to program DMA hardware
  pch_dma: support new device ML7213 IOH
  ARM: PL08x: prevent dma_set_runtime_config() reconfiguring memcpy channels
  ARM: PL08x: allow dma_set_runtime_config() to return errors
  ARM: PL08x: fix locking between prepare function and submit function
  ARM: PL08x: introduce 'phychan_hold' to hold on to physical channels
  ARM: PL08x: put txd's on the pending list in pl08x_tx_submit()
  ARM: PL08x: rename 'desc_list' as 'pend_list'
  ARM: PL08x: implement unmapping of memcpy buffers
  ARM: PL08x: store prep_* flags in async_tx structure
  ARM: PL08x: shrink srcbus/dstbus in txd structure
  ...
2011-01-17 10:54:41 -08:00
Tomoya MORINAGA
2cdf2455a6 pch_dma: support new device ML7213 IOH
Support new device OKI SEMICONDUCTOR's ML7213 IOH(Input/Output Hub) which is for
IVI(In-Vehicle Infotainment) use.
The ML7213 is companion chip for Intel Atom E6xx series.
The ML7213 is completely compatible for Intel EG20T PCH.

Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-14 16:24:53 -08:00
Ilya Yanok
ba2eea251f powerpc/512x: add MPC8308 dma support
MPC8308 has pretty much the same DMA controller as MPC5121 and
this patch adds support for MPC8308 to the mpc512x_dma driver.

Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Acked-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-12-29 22:29:02 -07:00
Valdis.Kletnieks@vt.edu
d2df40857f drivers/dma/Kconfig: add part number for Topcliff.
Product codenames are OK, but once an actual product name is available,
it should be referenced as well.

  http://ark.intel.com/chipset.aspx?familyID=52499

Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-29 14:14:02 -07:00
Dan Williams
5fc6d897fd async_tx: make async_tx channel switching opt-in
The majority of drivers in drivers/dma/ will never establish cross
channel operation chains and do not need the extra overhead in struct
dma_async_tx_descriptor.  Make channel switching opt-in by default.

Cc: Anatolij Gustschin <agust@denx.de>
Cc: Ira Snyder <iws@ovro.caltech.edu>
Cc: Linus Walleij <linus.walleij@stericsson.com>
Cc: Saeed Bishara <saeed@marvell.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-10-07 17:08:32 -07:00
Dan Williams
6391987d6f Merge branches 'dma40', 'pl08x', 'fsldma', 'imx' and 'intel-mid' into dmaengine 2010-10-07 15:19:01 -07:00
Sascha Hauer
1f1846c6ce dmaengine: Add Freescale i.MX1/21/27 DMA driver
This driver is currently implemented as a user to the old i.MX
DMA API. This allows us to convert each user of the old API to
the dmaengine API one by one. Once this is done the old DMA
driver can be merged into the i.MX dmaengine driver.

V2: remove some debug leftovers and unused variables

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-10-07 15:18:03 -07:00
Sascha Hauer
1ec1e82f25 dmaengine: Add Freescale i.MX SDMA support
This patch adds support for the Freescale i.MX SDMA engine.

The SDMA engine is a scatter/gather DMA engine which is implemented
as a seperate coprocessor. SDMA needs its own firmware which is
requested using the standard request_firmware mechanism. The firmware
has different entry points for each peripheral type, so drivers
have to pass the peripheral type to the DMA engine which in turn
picks the correct firmware entry point from a table contained in
the firmware image itself.
The original Freescale code also supports support for transfering
data to the internal SRAM which needs different entry points to
the firmware. Support for this is currently not implemented. Also,
support for the ASRC (asymmetric sample rate converter) is skipped.

I took a very simple approach to implement dmaengine support. Only
a single descriptor is statically assigned to a each channel. This
means that transfers can't be queued up but only a single transfer
is in progress. This simplifies implementation a lot and is sufficient
for the usual device/memory transfers.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Linus Walleij <linus.ml.walleij@gmail.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-10-05 15:49:26 -07:00
Linus Walleij
e8689e63d4 dmaengine: driver for the ARM PL080/PL081 PrimeCells v5
This creates a DMAengine driver for the ARM PL080/PL081 PrimeCells
based on the implementation earlier submitted by Peter Pearse.
This is working like a charm for memcpy and slave DMA to the PL011
PrimeCell on the PB11MPCore.

This DMA controller is used in mostly unmodified form in the ARM
RealView and Versatile platforms, in the ST-Ericsson Nomadik, and
in the ST SPEAr platform.

It has been converted to use the header from the Samsung PL080
derivate instead of its own defintions. The Samsungs have a custom
driver in their mach-* folders though, atleast we can share the
register definitions.

Cc: Peter Pearse <peter.pearse@arm.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: Alessandro Rubini <rubini@unipv.it>
Acked-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
[GFP_KERNEL to GFP_NOWAIT in pl08x_prep_dma_memcpy]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-09-29 16:13:51 -07:00
Russell King
0b019a4155 Merge branches 'master' and 'devel' into for-linus
Conflicts:
	arch/arm/Kconfig
	arch/arm/mm/Kconfig
2010-08-10 23:17:52 +01:00
Yong Wang
0c42bd0e42 dmaengine: Driver for Topcliff PCH DMA controller
Topcliff PCH is the platform controller hub that is going to
be used in Intel's upcoming general embedded platforms. This
adds the driver for Topcliff PCH DMA controller. The DMA
channels are strictly for device to host or host to device
transfers and cannot be used for generic memcpy.

Signed-off-by: Yong Wang <yong.y.wang@intel.com>
[kill GFP_ATOMIC, kill __raw_{read|write}l, locking fixlet]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-08-04 14:12:05 -07:00
Vinod Koul
b3c567e474 intel_mid: Add Mrst & Mfld DMA Drivers
This patch add DMA drivers for DMA controllers in Langwell chipset
of Intel(R) Moorestown platform and DMA controllers in Penwell of
Intel(R) Medfield platfrom

This patch adds support for Moorestown DMAC1 and DMAC2 controllers.
It also add support for Medfiled GP DMA and DMAC1 controllers.
These controllers supports memory to peripheral and peripheral to
memory transfers. It support only single block transfers.

This driver is based on Kernel DMA engine
Anyone who wishes to use this controller should use DMA engine APIs

This controller exposes DMA_SLAVE capabilities and notifies the client drivers
of DMA transaction completion

Config option required to be enabled CONFIG_INTEL_MID_DMAC=y

Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-07-27 23:32:57 -07:00
Paul Mundt
d5b732b17c Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 2010-05-31 13:14:26 +09:00
Jassi Brar
b3040e4067 DMA: PL330: Add dma api driver
Add DMA Engine API driver for the PL330 DMAC.
This driver is supposed to be reusable by various
platforms that have one or more PL330 DMACs.
Atm, DMA_SLAVE and DMA_MEMCPY capabilities have been
implemented.

Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Reviewed-by: Linus Walleij <linus.walleij@stericsson.com>
[dan.j.williams@intel.com: missing slab.h and ->device_control() fixups]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-05-23 20:28:19 -07:00
Paul Mundt
1f782fee18 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 2010-05-24 08:52:55 +09:00
Linus Walleij
8d318a50b3 DMAENGINE: Support for ST-Ericssons DMA40 block v3
This is a straightforward driver for the ST-Ericsson DMA40 DMA
controller found in U8500, implemented akin to the existing
COH 901 318 driver.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Acked-by: Srinidh Kasagar <srinidhi.kasagar@stericsson.com>
Cc: STEricsson_nomadik_linux@list.st.com
Cc: Alessandro Rubini <rubini@unipv.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-04-14 14:49:20 -07:00
Magnus Damm
927a7c9c17 dmaengine: shdma: Enable on SH-Mobile ARM
Enable the shdma dmaengine driver on SH-Mobile ARM.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-04-07 16:17:01 +09:00
Richard Röjfors
de5d4453c5 dma: Add timb-dma
Adds the support for the DMA engine withing the timberdale FPGA.

The DMA channels are strict device to host, or host to device
and can not be used for generic memcpy.

Signed-off-by: Richard Röjfors <richard.rojfors@pelagicore.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-03-25 17:18:43 -07:00
Piotr Ziecik
0fb6f739bb dma: Add MPC512x DMA driver
Adds initial version of MPC512x DMA driver.
Only memory to memory transfers are currenly supported.

Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
Signed-off-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: John Rigby <jcrigby@gmail.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-03-01 22:16:42 -07:00
Linus Walleij
6c664a8915 Debugging options for the DMA engine subsystem
This adds Kconfig options for DEBUG and VERBOSE_DEBUG to the DMA
engine subsystem, I got tired of editing the Makefile manually
each time I want to debug things in here, modelled this on the
debug switches for other subsystems and works like a charm when
working on our DMA engines.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-03-01 22:13:20 -07:00
Linus Torvalds
7949456b1b Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx:
  ppc440spe-adma: adds updated ppc440spe adma driver
  iop-adma.c: use resource_size()
  dmaengine: clarify the meaning of the DMA_CTRL_ACK flag
  sh: stylistic improvements for the DMA driver
  dmaengine: fix dmatest to verify minimum transfer length and test buffer size
  sh: DMA driver has to specify its alignment requirements
  Add COH 901 318 DMA block driver v5
2009-12-16 10:28:56 -08:00
Anatolij Gustschin
12458ea06e ppc440spe-adma: adds updated ppc440spe adma driver
This patch adds new version of the PPC440SPe ADMA driver.

Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-12-11 21:24:44 -07:00
Russell King
e28edb723e Merge branches 'at91', 'ep93xx', 'etm', 'ks8695', 'nuc', 'u300' and 'u8500' into devel 2009-12-05 10:35:18 +00:00
Linus Walleij
61f135b92f Add COH 901 318 DMA block driver v5
This patch adds support for the ST-Ericsson COH 901 318 DMA block,
found in the U300 series platforms. It registers a DMA slave for
device I/O and also a memcpy slave for memcpy.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-11-19 23:45:19 -07:00
Dan Williams
7b3cc2b1fc async_tx: build-time toggling of async_{syndrome,xor}_val dma support
ioat3.2 does not support asynchronous error notifications which makes
the driver experience latencies when non-zero pq validate results are
expected.  Provide a mechanism for turning off async_xor_val and
async_syndrome_val via Kconfig.  This approach is generally useful for
any driver that specifies ASYNC_TX_DISABLE_CHANNEL_SWITCH and would like
to force the async_tx api to fall back to the synchronous path for
certain operations.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-11-19 23:21:03 -07:00
Yegor Yefremov
cd3abf98ae ARM: 5770/1: Add DMA Engine support to at91sam9g45
Add at91sam9g45 dependency to drivers/dma/Kconfig

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-25 16:00:34 +00:00
Dan Williams
9a8de639f3 async_tx: remove HIGHMEM64G restriction
This restriction prevented ASYNC_TX_DMA from being enabled on platform
configurations where DMA address conversion could not be performed in
place on the stack.  Since commit 04ce9ab3 ("async_xor: permit callers
to pass in a 'dma/page scribble' region") the async_tx api now either
uses a caller provided 'scribble' buffer, or performs the conversion in
place when sizeof(dma_addr_t) <= sizeof(struct page *).

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-09-08 17:56:37 -07:00
Nobuhiro Iwamatsu
d8902adcc1 dmaengine: sh: Add Support SuperH DMA Engine driver
This supported all DMA channels, and it was tested in SH7722,
SH7780, SH7785 and SH7763.
This can not use with SH DMA API.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Reviewed-by: Matt Fleming <matt@console-pimps.org>
Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-09-08 17:56:02 -07:00
Dan Williams
bbb20089a3 Merge branch 'dmaengine' into async-tx-next
Conflicts:
	crypto/async_tx/async_xor.c
	drivers/dma/ioat/dma_v2.h
	drivers/dma/ioat/pci.c
	drivers/md/raid5.c
2009-09-08 17:55:21 -07:00
Dan Williams
138f4c359d dmaengine, async_tx: add a "no channel switch" allocator
Channel switching is problematic for some dmaengine drivers as the
architecture precludes separating the ->prep from ->submit.  In these
cases the driver can select ASYNC_TX_DISABLE_CHANNEL_SWITCH to modify
the async_tx allocator to only return channels that support all of the
required asynchronous operations.

For example MD_RAID456=y selects support for asynchronous xor, xor
validate, pq, pq validate, and memcpy.  When
ASYNC_TX_DISABLE_CHANNEL_SWITCH=y any channel with all these
capabilities is marked DMA_ASYNC_TX allowing async_tx_find_channel() to
quickly locate compatible channels with the guarantee that dependency
chains will remain on one channel.  When
ASYNC_TX_DISABLE_CHANNEL_SWITCH=n async_tx_find_channel() may select
channels that lead to operation chains that need to cross channel
boundaries using the async_tx channel switch capability.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-09-08 17:42:51 -07:00
Dan Williams
a348a7e6fd Merge commit 'v2.6.31-rc1' into dmaengine 2009-09-08 14:32:24 -07:00
Nicolas Ferre
dc78baa2b9 dmaengine: at_hdmac: new driver for the Atmel AHB DMA Controller
This AHB DMA Controller (aka HDMA or DMAC on AT91 systems) is availlable on
at91sam9rl chip. It will be used on other products in the future.

This first release covers only the memory-to-memory tranfer type. This is the
only tranfer type supported by this chip.  On other products, it will be used
also for peripheral DMA transfer (slave API support to come).

I used dmatest client without problem in different configurations to test it.

Full documentation for this controller can be found in the SAM9RL datasheet:
http://www.atmel.com/dyn/products/product_card.asp?part_id=4243

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-07-22 22:41:27 -07:00
Dan Williams
daf4219dbc dmaengine: move HIGHMEM64G restriction to ASYNC_TX_DMA
On HIGHMEM64G systems dma_addr_t is known to be larger than (void *)
which precludes async_xor from performing dma address conversions by
reusing the input parameter address list.  However, other parts of the
dmaengine infrastructure do not suffer this constraint, so the
HIGHMEM64G restriction can be down-levelled.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-07-01 16:12:53 -07:00
Atsushi Nemoto
ea76f0b375 DMA: TXx9 Soc DMA Controller driver
This patch adds support for the integrated DMAC of the TXx9 family.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-06-17 11:06:25 +01:00
Dan Williams
04ce9ab385 async_xor: permit callers to pass in a 'dma/page scribble' region
async_xor() needs space to perform dma and page address conversions.  In
most cases the code can simply reuse the struct page * array because the
size of the native pointer matches the size of a dma/page address.  In
order to support archs where sizeof(dma_addr_t) is larger than
sizeof(struct page *), or to preserve the input parameters, we utilize a
memory region passed in by the caller.

Since the code is now prepared to handle the case where it cannot
perform address conversions on the stack, we no longer need the
!HIGHMEM64G dependency in drivers/dma/Kconfig.

[ Impact: don't clobber input buffers for address conversions ]

Reviewed-by: Andre Noll <maan@systemlinux.org>
Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-06-03 14:22:28 -07:00
Dan Williams
729b5d1b8e dmaengine: allow dma support for async_tx to be toggled
Provide a config option for blocking the allocation of dma channels to
the async_tx api.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-25 09:13:25 -07:00
Guennadi Liakhovetski
5296b56d1b i.MX31: Image Processing Unit DMA and IRQ drivers
i.MX3x SoCs contain an Image Processing Unit, consisting of a Control
Module (CM), Display Interface (DI), Synchronous Display Controller (SDC),
Asynchronous Display Controller (ADC), Image Converter (IC), Post-Filter
(PF), Camera Sensor Interface (CSI), and an Image DMA Controller (IDMAC).
CM contains, among other blocks, an Interrupt Generator (IG) and a Clock
and Reset Control Unit (CRCU). This driver serves IDMAC and IG. They are
supported over dmaengine and irq-chip APIs respectively.

IDMAC is a specialised DMA controller, its DMA channels cannot be used for
general-purpose operations, even though it might be possible to configure
a memory-to-memory channel for memcpy operation. This driver will not work
with generic dmaengine clients, clients, wishing to use it must use
respective wrapper structures, they also must specify which channels they
require, as channels are hard-wired to specific IPU functions.

Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-01-19 15:36:21 -07:00
Dan Williams
07f2211e4f dmaengine: remove dependency on async_tx
async_tx.ko is a consumer of dma channels.  A circular dependency arises
if modules in drivers/dma rely on common code in async_tx.ko.  It
prevents either module from being unloaded.

Move dma_wait_for_async_tx and async_tx_run_dependencies to dmaeninge.o
where they should have been from the beginning.

Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-01-05 18:10:19 -07:00
Timur Tabi
77cd62e808 fsldma: allow Freescale Elo DMA driver to be compiled as a module
Modify the Freescale Elo / Elo Plus DMA driver so that it can be compiled as
a module.

The primary change is to stop treating the DMA controller as a bus, and the
DMA channels as devices on the bus.  This is because the Open Firmware (OF)
kernel code does not allow busses to be removed, so although we can call
of_platform_bus_probe() to probe the DMA channels, there is no
of_platform_bus_remove().  Instead, the DMA channels are manually probed,
similar to what fsl_elbc_nand.c does.

Cc: Scott Wood <scottwood@freescale.com>
Acked-by: Li Yang <leoli@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-09-26 17:00:11 -07:00
Haavard Skinnemoen
3bfb1d20b5 dmaengine: Driver for the Synopsys DesignWare DMA controller
This adds a driver for the Synopsys DesignWare DMA controller (aka
DMACA on AVR32 systems.) This DMA controller can be found integrated
on the AT32AP7000 chip and is primarily meant for peripheral DMA
transfer, but can also be used for memory-to-memory transfers.

This patch is based on a driver from David Brownell which was based on
an older version of the DMA Engine framework. It also implements the
proposed extensions to the DMA Engine API for slave DMA operations.

The dmatest client shows no problems, but there may still be room for
improvement performance-wise. DMA slave transfer performance is
definitely "good enough"; reading 100 MiB from an SD card running at ~20
MHz yields ~7.2 MiB/s average transfer rate.

Full documentation for this controller can be found in the Synopsys
DW AHB DMAC Databook:

http://www.synopsys.com/designware/docs/iip/DW_ahb_dmac/latest/doc/dw_ahb_dmac_db.pdf

The controller has lots of implementation options, so it's usually a
good idea to check the data sheet of the chip it's intergrated on as
well. The AT32AP7000 data sheet can be found here:

http://www.atmel.com/dyn/products/datasheets.asp?family_id=682


Changes since v4:
  * Use client_count instead of dma_chan_is_in_use()
  * Add missing include
  * Unmap buffers unless client told us not to

Changes since v3:
  * Update to latest DMA engine and DMA slave APIs
  * Embed the hw descriptor into the sw descriptor
  * Clean up and update MODULE_DESCRIPTION, copyright date, etc.

Changes since v2:
  * Dequeue all pending transfers in terminate_all()
  * Rename dw_dmac.h -> dw_dmac_regs.h
  * Define and use controller-specific dma_slave data
  * Fix up a few outdated comments
  * Define hardware registers as structs (doesn't generate better
    code, unfortunately, but it looks nicer.)
  * Get number of channels from platform_data instead of hardcoding it
    based on CONFIG_WHATEVER_CPU.
  * Give slave clients exclusive access to the channel

Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com>,
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-08 11:59:42 -07:00
Haavard Skinnemoen
4a776f0aa9 dmatest: Simple DMA memcpy test client
This client tests DMA memcpy using various lengths and various offsets
into the source and destination buffers. It will initialize both
buffers with a repeatable pattern and verify that the DMA engine copies
the requested region and nothing more. It will also verify that the
bytes aren't swapped around, and that the source buffer isn't modified.

The dmatest module can be configured to test a specific device, a
specific channel. It can also test multiple channels at the same time,
and it can start multiple threads competing for the same channel.

Changes since v2:
  * Support testing multiple channels at the same time
  * Support testing with multiple threads competing for the same channel
  * Use counting test patterns in order to catch byte ordering issues

Changes since v1:
  * Remove extra dashes around "help"
  * Remove "default n" from Kconfig
  * Turn TEST_BUF_SIZE into a module parameter
  * Return DMA_NAK instead of DMA_DUP
  * Print unhandled events
  * Support testing specific channels and devices
  * Move to the end of the Makefile

Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-08 11:58:45 -07:00
Saeed Bishara
ff7b04796d dmaengine: DMA engine driver for Marvell XOR engine
The XOR engine found in Marvell's SoCs and system controllers
provides XOR and DMA operation, iSCSI CRC32C calculation, memory
initialization, and memory ECC error cleanup operation support.

This driver implements the DMA engine API and supports the following
capabilities:
- memcpy
- xor
- memset

The XOR engine can be used by DMA engine clients implemented in the
kernel, one of those clients is the RAID module.  In that case, I
observed 20% improvement in the raid5 write throughput, and 40%
decrease in the CPU utilization when doing array construction, those
results obtained on an 5182 running at 500Mhz.

When enabling the NET DMA client, the performance decreased, so
meanwhile it is recommended to keep this client off.

Signed-off-by: Saeed Bishara <saeed@marvell.com>
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-08 11:58:36 -07:00
Dan Williams
9c402f4e19 dmaengine: remove arch dependency from DMADEVICES
The dependency is redundant since all drivers set their specific arch
dependencies.  The NET_DMA option is modified to be enabled only on platforms
where it is known to have a positive effect.  HAS_DMA is added as an explicit
dependency for the DMADEVICES menu.

Acked-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-08 11:58:12 -07:00
Zhang Wei
411e23dbe9 fsldma: Remove CONFIG_FSL_DMA_SELFTEST, keep fsl_dma_self_test() running always.
Always enabling the fsl_dma_self_test() to ensure the DMA controller
should works well after the driver probed.

Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-04-17 13:22:15 -07:00
Zhang Wei
173acc7ce8 dmaengine: add driver for Freescale MPC85xx DMA controller
The driver implements DMA engine API for Freescale MPC85xx DMA controller,
which could be used by devices in the silicon.  The driver supports the
Basic mode of Freescale MPC85xx DMA controller.  The MPC85xx processors
supported include MPC8540/60, MPC8555, MPC8548, MPC8641 and so on.

The MPC83xx(MPC8349, MPC8360) are also supported.

[kamalesh@linux.vnet.ibm.com: build fix]
[dan.j.williams@intel.com: merge mm fixes, rebase on async_tx-2.6.25]
Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
Signed-off-by: Ebony Zhu <ebony.zhu@freescale.com>
Acked-by: Kumar Gala <galak@gate.crashing.org>
Cc: Shannon Nelson <shannon.nelson@intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-03-04 10:16:46 -07:00
Dan Williams
0036731c88 async_tx: kill tx_set_src and tx_set_dest methods
The tx_set_src and tx_set_dest methods were originally implemented to allow
an array of addresses to be passed down from async_xor to the dmaengine
driver while minimizing stack overhead.  Removing these methods allows
drivers to have all transaction parameters available at 'prep' time, saves
two function pointers in struct dma_async_tx_descriptor, and reduces the
number of indirect branches..

A consequence of moving this data to the 'prep' routine is that
multi-source routines like async_xor need temporary storage to convert an
array of linear addresses into an array of dma addresses.  In order to keep
the same stack footprint of the previous implementation the input array is
reused as storage for the dma addresses.  This requires that
sizeof(dma_addr_t) be less than or equal to sizeof(void *).  As a
consequence CONFIG_DMADEVICES now depends on !CONFIG_HIGHMEM64G.  It also
requires that drivers be able to make descriptor resources available when
the 'prep' routine is polled.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Shannon Nelson <shannon.nelson@intel.com>
2008-02-06 10:12:17 -07:00
Haavard Skinnemoen
6d4f5879b6 dmaengine: correct invalid assumptions in the Kconfig text
This patch corrects recently changed (and now invalid) Kconfig descriptions
for the DMA engine framework:

 - Non-Intel(R) hardware also has DMA engines;
 - DMA is used for more than memcpy and RAID offloading.

In fact, on most platforms memcpy and RAID aren't factors, and DMA
exists so that peripherals can transfer data to/from memory while
the CPU does other work.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-29 09:24:53 -08:00
Andi Kleen
4138f08d1c Remove bogus default y for DMAR and NET_DMA
No reason I can think of of making them default y Most people don't have
the hardware and with default y they just pollute lots of configs during
make oldconfig.

Signed-off-by: Andi Kleen <ak@suse.de>
Acked-by: Jeff Garzik <jeff@garzik.org>
Acked-by: "Nelson, Shannon" <shannon.nelson@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-30 08:06:55 -07:00
Shannon Nelson
2ed6dc34f9 I/OAT: Add DCA services
Add code to connect to the DCA driver and provide cpu tags for use by
drivers that would like to use Direct Cache Access hints.

    [Adrian Bunk]                Several Kconfig cleanup items
    [Andrew Morten, Chris Leech] Fix for using cpu_physical_id() even when
			         built for uni-processor

Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:43:09 -07:00
Dan Williams
1b0fac4587 dma-mapping: prevent dma dependent code from linking on !HAS_DMA archs
Continuing the work started in 411f0f3edc ...

This enables code with a dma path, that compiles away, to build without
requiring additional code factoring.  It also prevents code that calls
dma_alloc_coherent and dma_free_coherent from linking whereas previously
the code would hit a BUG() at run time.  Finally, it allows archs that set
!HAS_DMA to delete their asm/dma-mapping.h file.

Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: John W. Linville <linville@tuxdriver.com>
Cc: Kyle McMartin <kyle@parisc-linux.org>
Cc: James Bottomley <James.Bottomley@SteelEye.com>
Cc: Tejun Heo <htejun@gmail.com>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: <geert@linux-m68k.org>
Cc: <zippel@linux-m68k.org>
Cc: <spyro@f2s.com>
Cc: <ysato@users.sourceforge.jp>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:45 -07:00