When receiving a frame with errors, currently we do nothing with it (we
don't construct an skb or an xdp_buff), we just exit the NAPI poll loop.
Let's put the buffer back into the RX ring (similar to XDP_DROP).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
enetc_put_xdp_buff has nothing to do with XDP, frankly, it is just a
helper to populate the recycle end of the shadow RX BD ring
(next_to_alloc) with a given buffer.
On the other hand, enetc_put_rx_buff plays more tricks than its name
would suggest.
So let's rename enetc_put_rx_buff into enetc_flip_rx_buff to reflect the
half-page buffer reuse tricks that it employs, and enetc_put_xdp_buff
into enetc_put_rx_buff which suggests a more garden-variety operation.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Later in enetc_clean_tx_ring we have:
/* Scrub the swbd here so we don't have to do that
* when we reuse it during xmit
*/
memset(tx_swbd, 0, sizeof(*tx_swbd));
So these assignments are unnecessary.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Nguyen says:
====================
1GbE Intel Wired LAN Driver Updates 2021-04-16
This series contains updates to igb and igc drivers.
Ederson adjusts Tx buffer distributions in Qav mode to improve
TSN-aware traffic for igb. He also enable PPS support and auxiliary PHC
functions for igc.
Grzegorz checks that the MTA register was properly written and
retries if not for igb.
Sasha adds reporting of EEE low power idle counters to ethtool and fixes
a return value being overwritten through looping for igc.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix the following out-of-bounds warning:
net/core/flow_dissector.c:835:3: warning: 'memcpy' offset [33, 48] from the object at 'flow_keys' is out of the bounds of referenced subobject 'ipv6_src' with type '__u32[4]' {aka 'unsigned int[4]'} at offset 16 [-Warray-bounds]
The problem is that the original code is trying to copy data into a
couple of struct members adjacent to each other in a single call to
memcpy(). So, the compiler legitimately complains about it. As these
are just a couple of members, fix this by copying each one of them in
separate calls to memcpy().
This helps with the ongoing efforts to globally enable -Warray-bounds
and get us closer to being able to tighten the FORTIFY_SOURCE routines
on memcpy().
Link: https://github.com/KSPP/linux/issues/109
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
When I added support to allow generic netlink multicast groups to be
restricted to subscribers with CAP_NET_ADMIN I was unaware that a
genl_bind implementation already existed in the past.
It was reverted due to ABBA deadlock:
1. ->netlink_bind gets called with the table lock held.
2. genetlink bind callback is invoked, it grabs the genl lock.
But when a new genl subsystem is (un)registered, these two locks are
taken in reverse order.
One solution would be to revert again and add a comment in genl
referring 1e82a62fec, "genetlink: remove genl_bind").
This would need a second change in mptcp to not expose the raw token
value anymore, e.g. by hashing the token with a secret key so userspace
can still associate subflow events with the correct mptcp connection.
However, Paolo Abeni reminded me to double-check why the netlink table is
locked in the first place.
I can't find one. netlink_bind() is already called without this lock
when userspace joins a group via NETLINK_ADD_MEMBERSHIP setsockopt.
Same holds for the netlink_unbind operation.
Digging through the history, commit f773608026
("netlink: access nlk groups safely in netlink bind and getname")
expanded the lock scope.
commit 3a20773bee ("net: netlink: cap max groups which will be considered in netlink_bind()")
... removed the nlk->ngroups access that the lock scope
extension was all about.
Reduce the lock scope again and always call ->netlink_bind without
the table lock.
The Fixes tag should be vs. the patch mentioned in the link below,
but that one got squash-merged into the patch that came earlier in the
series.
Fixes: 4d54cc3211 ("mptcp: avoid lock_fast usage in accept path")
Link: https://lore.kernel.org/mptcp/20210213000001.379332-8-mathew.j.martineau@linux.intel.com/T/#u
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Xin Long <lucien.xin@gmail.com>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Sean Tranchetti <stranche@codeaurora.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski says:
====================
ethtool: add uAPI for reading standard stats
Continuing the effort of providing a unified access method
to standard stats, and explicitly tying the definitions to
the standards this series adds an API for general stats
which do no fit into more targeted control APIs.
There is nothing clever here, just a netlink API for dumping
statistics defined by standards and RFCs which today end up
in ethtool -S under infinite variations of names.
This series adds basic IEEE stats (for PHY, MAC, Ctrl frames)
and RMON stats. AFAICT other RFCs only duplicate the IEEE
stats.
This series does _not_ add a netlink API to read driver-defined
stats. There seems to be little to gain from moving that part
to netlink.
The netlink message format is very simple, and aims to allow
adding stats and groups with no changes to user tooling (which
IIUC is expected for ethtool).
On user space side we can re-use -S, and make it dump
standard stats if --groups are defined.
$ ethtool -S eth0 --groups eth-phy eth-mac eth-ctrl rmon
Stats for eth0:
eth-phy-SymbolErrorDuringCarrier: 0
eth-mac-FramesTransmittedOK: 0
eth-mac-FrameTooLongErrors: 0
eth-ctrl-MACControlFramesTransmitted: 0
eth-ctrl-MACControlFramesReceived: 1
eth-ctrl-UnsupportedOpcodesReceived: 0
rmon-etherStatsUndersizePkts: 0
rmon-etherStatsJabbers: 0
rmon-rx-etherStatsPkts64Octets: 1
rmon-rx-etherStatsPkts128to255Octets: 0
rmon-rx-etherStatsPkts1024toMaxOctets: 1
rmon-tx-etherStatsPkts64Octets: 1
rmon-tx-etherStatsPkts128to255Octets: 0
rmon-tx-etherStatsPkts1024toMaxOctets: 1
v1:
Driver support for mlxsw, mlx5 and bnxt included.
Compared to the RFC I went ahead with wrapping the stats into
a 1:1 nest. Now IDs of stats can start from 0, at a cost of
slightly "careful" u64 alignment handling.
v2:
Add missing kdoc in patch 5.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Most of the names seem to strongly correlate with names from
the standard and RFC. Whether ..+good_frames are indeed Frames..OK
I'm the least sure of.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
mlxsw has nicely grouped stats, add support for standard uAPI.
I'm guessing the register access part. Compile tested only.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Most devices maintain RMON (RFC 2819) stats - particularly
the "histogram" of packets received by size. Unlike other
RFCs which duplicate IEEE stats, the short/oversized frame
counters in RMON don't seem to match IEEE stats 1-to-1 either,
so expose those, too. Do not expose basic packet, CRC errors
etc - those are already otherwise covered.
Because standard defines packet ranges only up to 1518, and
everything above that should theoretically be "oversized"
- devices often create their own ranges.
Going beyond what the RFC defines - expose the "histogram"
in the Tx direction (assume for now that the ranges will
be the same).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Number of devices maintains the standard-based MAC control
counters for control frames. Add a API for those.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Most of the MAC statistics are included in
struct rtnl_link_stats64, but some fields
are aggregated. Besides it's good to expose
these clearly hardware stats separately.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add an interface for reading standard stats, including
stats which don't have a corresponding control interface.
Start with IEEE 802.3 PHY stats. There seems to be only
one stat to expose there.
Define API to not require user space changes when new
stats or groups are added. Groups are based on bitset,
stats have a string set associated.
v1: wrap stats in a nest
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make the lack of expectations for switching NICs explicit,
describe the new stats.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix the following out-of-bounds warning:
net/sctp/sm_make_chunk.c:3150:4: warning: 'memcpy' offset [17, 28] from the object at 'addr' is out of the bounds of referenced subobject 'v4' with type 'struct sockaddr_in' at offset 0 [-Warray-bounds]
This helps with the ongoing efforts to globally enable -Warray-bounds
and get us closer to being able to tighten the FORTIFY_SOURCE routines
on memcpy().
Link: https://github.com/KSPP/linux/issues/109
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patchset introduces updates to mlx5e netdev driver.
1) Tariq refactors TLS offloads and adds resiliency against RX resync
failures
2) Maxim reduces code duplications by unifying channels reset flow
regardless if channels are closed or open
3) Aya Enhances TX/RX health reporters diagnostics to expose the
internal clock time-stamping format
4) Moshe adds support for ethtool extended link state, to show the reason
for link down
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmB53AUACgkQSD+KveBX
+j6rzAf+JwJG9G7GSj3a/xird4dlgt4xPbRLB19pTw19ZyHZyujDxdN4QM3r5hTk
5ua1PnhYYaUcyPFvdgR9J0cIJ3QRaxZ+q/XnkE9Yo0eZ1DJ0SL/n6rxEQpcxpee1
XP7qjJu3leVwh5mVW2uOx/ClrL9vYb/fG3Q00j59rUB+i9bZszXZgZ99hJvYBFTB
k7W/9X6BNxuLlEg/Ui9L499aDWHRcIY5J2ku+1v/8paJZltk+IFv5glYszylE++M
l68drIy3dIjl/Sxj6WR2rHTBus6AIFxWFH8C2L7uqGl97BPjS80snMPIefLJhW+y
bQvzMDtfKDmIpvEIdzHPuEhEdqqteg==
=YCy6
-----END PGP SIGNATURE-----
Merge tag 'mlx5-updates-2021-04-16' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2021-04-16
This patchset introduces updates to mlx5e netdev driver.
1) Tariq refactors TLS offloads and adds resiliency against RX resync
failures
2) Maxim reduces code duplications by unifying channels reset flow
regardless if channels are closed or open
3) Aya Enhances TX/RX health reporters diagnostics to expose the
internal clock time-stamping format
4) Moshe adds support for ethtool extended link state, to show the reason
for link down
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmB5/80QHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgpgJWD/0YyQ7YlMKw4x2nS6TiojeD5KN8aTvVVHlf
TetYVXIOaMNPatUDREVl7vgaQVFi2cgWLvshYPIarsQK9ESNJ/UqKi0c6pJsa29w
02K8EJsEdmQmJlyC6tUv/Drvdfzinx+jAm9doz8FrJ+2v5+pYqNFhFTh/JKRebI8
kBEKH/e3eHg305TDXcWOoNxX3jD77v1IJo8JavLt1vncQKb6P3dahGwmkFRpRcHZ
sY33baI2jdO/79ybH0F0fNgD+XGnBYShKB7iOlJfT9SeI8NfpR/OCuuPl3gxeeKZ
PwHcsPHA/b0AAUKpWY0sX/86xMUUab2DPJV5nQR5SrgniJLs0Xqm0dvz1r6QM2BK
7EfwbXK48xm6Wop5WFlo+wqzW11ES/nRHm9leRomeeKo6Goe/4kyEgK93QJOkckv
/kt8t4PIxALlWKmgJgKk5kEWiP/QT0LjaZE2lYy9VcfpSoC7E7ZnK1KlvwbYOfZK
QqjNNsRr2z7zQaUCFHDc3mPe/WkV8DygRrXZYl8qfopqndOduceFaGqNe5iZV2IX
NnC7FGY66dcmjqGmOqr+4RvhUYR2+GtazaYgV14LM1cGBO5OtqlS1m+DRDbiavp4
fpHeGGQx78O97LURNJG4Ti/AR5dfSQLQwZzb60UBk43a9ZwVsLtxFquSaV8dkm3U
0hfxANWYXg==
=KEBW
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.12-2021-04-16' of git://git.kernel.dk/linux-block
Pull io_uring fix from Jens Axboe:
"Fix for a potential hang at exit with SQPOLL from Pavel"
* tag 'io_uring-5.12-2021-04-16' of git://git.kernel.dk/linux-block:
io_uring: fix early sqd_list removal sqpoll hangs
Fix various kernel-doc warnings in lib/ due to missing or erroneous
function names.
Add kernel-doc for some function parameters that was missing. Use
kernel-doc "Return:" notation in earlycpio.c.
Quietens the following warnings:
lib/earlycpio.c:61: warning: expecting prototype for cpio_data find_cpio_data(). Prototype was for find_cpio_data() instead
lib/lru_cache.c:640: warning: expecting prototype for lc_dump(). Prototype was for lc_seq_dump_details() instead
lru_cache.c:90: warning: Function parameter or member 'cache' not described in 'lc_create'
lib/parman.c:368: warning: expecting prototype for parman_item_del(). Prototype was for parman_item_remove() instead
parman.c:309: warning: Excess function parameter 'prority' description in 'parman_prio_init'
lib/radix-tree.c:703: warning: expecting prototype for __radix_tree_insert(). Prototype was for radix_tree_insert() instead
radix-tree.c:180: warning: Excess function parameter 'addr' description in 'radix_tree_find_next_bit'
radix-tree.c:180: warning: Excess function parameter 'size' description in 'radix_tree_find_next_bit'
radix-tree.c:931: warning: Function parameter or member 'iter' not described in 'radix_tree_iter_replace'
Link: https://lkml.kernel.org/r/20210411221756.15461-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Lars Ellenberg <lars.ellenberg@linbit.com>
Cc: Jiri Pirko <jiri@nvidia.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
With clang-11+, the code is broken due to my kvmalloc() conversion
(which predated the clang-11 support code) leaving one vmalloc() in
place. Fix that.
Link: https://lkml.kernel.org/r/20210412214210.6e1ecca9cdc5.I24459763acf0591d5e6b31c7e3a59890d802f79c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
READ_ONCE() cannot be used for reading PTEs. Use ptep_get() instead, to
avoid the following errors:
CC mm/ptdump.o
In file included from <command-line>:
mm/ptdump.c: In function 'ptdump_pte_entry':
include/linux/compiler_types.h:320:38: error: call to '__compiletime_assert_207' declared with attribute error: Unsupported access size for {READ,WRITE}_ONCE().
320 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
| ^
include/linux/compiler_types.h:301:4: note: in definition of macro '__compiletime_assert'
301 | prefix ## suffix(); \
| ^~~~~~
include/linux/compiler_types.h:320:2: note: in expansion of macro '_compiletime_assert'
320 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
| ^~~~~~~~~~~~~~~~~~~
include/asm-generic/rwonce.h:36:2: note: in expansion of macro 'compiletime_assert'
36 | compiletime_assert(__native_word(t) || sizeof(t) == sizeof(long long), \
| ^~~~~~~~~~~~~~~~~~
include/asm-generic/rwonce.h:49:2: note: in expansion of macro 'compiletime_assert_rwonce_type'
49 | compiletime_assert_rwonce_type(x); \
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
mm/ptdump.c:114:14: note: in expansion of macro 'READ_ONCE'
114 | pte_t val = READ_ONCE(*pte);
| ^~~~~~~~~
make[2]: *** [mm/ptdump.o] Error 1
See commit 481e980a7c ("mm: Allow arches to provide ptep_get()") and
commit c0e1c8c22b ("powerpc/8xx: Provide ptep_get() with 16k pages")
for details.
Link: https://lkml.kernel.org/r/912b349e2bcaa88939904815ca0af945740c6bd4.1618478922.git.christophe.leroy@csgroup.eu
Fixes: 30d621f672 ("mm: add generic ptdump")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Steven Price <steven.price@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mapping dirty helpers have, so far, been only used on X86, but a port of
vmwgfx to ARM64 exposed a problem which results in a compilation error
on ARM64 systems:
mm/mapping_dirty_helpers.c: In function `wp_clean_pud_entry':
mm/mapping_dirty_helpers.c:172:32: error: implicit declaration of function `pud_dirty'; did you mean `pmd_dirty'? [-Werror=implicit-function-declaration]
This is due to the fact that mapping_dirty_helpers code assumes that
pud_dirty is always defined, which is not the case for architectures
that don't define CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD.
ARM64 arch is a little inconsistent when it comes to PUD hugepage
helpers, e.g. it defines pud_young but not pud_dirty but regardless of
that the core kernel code shouldn't assume that any of the PUD hugepage
helpers are available unless CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD
is defined. This prevents compilation errors whenever one of the
drivers is ported to new architectures.
Link: https://lkml.kernel.org/r/20210409165151.694574-1-zackr@vmware.com
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Thomas Hellstrm (Intel) <thomas_os@shipmail.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The ia64_mf() macro defined in tools/arch/ia64/include/asm/barrier.h is
already defined in <asm/gcc_intrin.h> on ia64 which causes libbpf
failing to build:
CC /usr/src/linux/tools/bpf/bpftool//libbpf/staticobjs/libbpf.o
In file included from /usr/src/linux/tools/include/asm/barrier.h:24,
from /usr/src/linux/tools/include/linux/ring_buffer.h:4,
from libbpf.c:37:
/usr/src/linux/tools/include/asm/../../arch/ia64/include/asm/barrier.h:43: error: "ia64_mf" redefined [-Werror]
43 | #define ia64_mf() asm volatile ("mf" ::: "memory")
|
In file included from /usr/include/ia64-linux-gnu/asm/intrinsics.h:20,
from /usr/include/ia64-linux-gnu/asm/swab.h:11,
from /usr/include/linux/swab.h:8,
from /usr/include/linux/byteorder/little_endian.h:13,
from /usr/include/ia64-linux-gnu/asm/byteorder.h:5,
from /usr/src/linux/tools/include/uapi/linux/perf_event.h:20,
from libbpf.c:36:
/usr/include/ia64-linux-gnu/asm/gcc_intrin.h:382: note: this is the location of the previous definition
382 | #define ia64_mf() __asm__ volatile ("mf" ::: "memory")
|
cc1: all warnings being treated as errors
Thus, remove the definition from tools/arch/ia64/include/asm/barrier.h.
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There is no longer an ia64-specific version of the errno.h header below
arch/ia64/include/uapi/asm/, so trying to build tools/bpf fails with:
CC /usr/src/linux/tools/bpf/bpftool/btf_dumper.o
In file included from /usr/src/linux/tools/include/linux/err.h:8,
from btf_dumper.c:11:
/usr/src/linux/tools/include/uapi/asm/errno.h:13:10: fatal error: ../../../arch/ia64/include/uapi/asm/errno.h: No such file or directory
13 | #include "../../../arch/ia64/include/uapi/asm/errno.h"
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
Thus, just remove the inclusion of the ia64-specific errno.h so that the
build will use the generic errno.h header on this target which was used
there anyway as the ia64-specific errno.h was just a wrapper for the
generic header.
Fixes: c25f867ddd ("ia64: remove unneeded uapi asm-generic wrappers")
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix IA64 discontig.c Section mismatch warnings.
When CONFIG_SPARSEMEM=y and CONFIG_MEMORY_HOTPLUG=y, the functions
computer_pernodesize() and scatter_node_data() should not be marked as
__meminit because they are needed after init, on any memory hotplug
event. Also, early_nr_cpus_node() is called by compute_pernodesize(),
so early_nr_cpus_node() cannot be __meminit either.
WARNING: modpost: vmlinux.o(.text.unlikely+0x1612): Section mismatch in reference from the function arch_alloc_nodedata() to the function .meminit.text:compute_pernodesize()
The function arch_alloc_nodedata() references the function __meminit compute_pernodesize().
This is often because arch_alloc_nodedata lacks a __meminit annotation or the annotation of compute_pernodesize is wrong.
WARNING: modpost: vmlinux.o(.text.unlikely+0x1692): Section mismatch in reference from the function arch_refresh_nodedata() to the function .meminit.text:scatter_node_data()
The function arch_refresh_nodedata() references the function __meminit scatter_node_data().
This is often because arch_refresh_nodedata lacks a __meminit annotation or the annotation of scatter_node_data is wrong.
WARNING: modpost: vmlinux.o(.text.unlikely+0x1502): Section mismatch in reference from the function compute_pernodesize() to the function .meminit.text:early_nr_cpus_node()
The function compute_pernodesize() references the function __meminit early_nr_cpus_node().
This is often because compute_pernodesize lacks a __meminit annotation or the annotation of early_nr_cpus_node is wrong.
Link: https://lkml.kernel.org/r/20210411001201.3069-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Mike Rapoport <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix ia64 generic_defconfig duplicate entries, as warned by:
arch/ia64/configs/generic_defconfig: warning: override: reassigning to symbol ATA: => 58
arch/ia64/configs/generic_defconfig: warning: override: reassigning to symbol ATA_PIIX: => 59
These 2 symbols still have the same value as in the removed lines.
Link: https://lkml.kernel.org/r/20210411020255.18052-1-rdunlap@infradead.org
Fixes: c331649e63 ("ia64: Use libata instead of the legacy ide driver in defconfigs")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
e1000's #define of CONFIG_RAM_BASE conflicts with a Kconfig symbol in
arch/csky/Kconfig.
The symbol in e1000 has been around longer, so change arch/csky/ to use
DRAM_BASE instead of RAM_BASE to remove the conflict. (although e1000
is also a 2-line change)
Link: https://lkml.kernel.org/r/20210411055335.7111-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Guo Ren <guoren@kernel.org>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
CONFIG_KASAN_STACK and CONFIG_KASAN_STACK_ENABLE both enable KASAN stack
instrumentation, but we should only need one config, so that we remove
CONFIG_KASAN_STACK_ENABLE and make CONFIG_KASAN_STACK workable. see [1].
When enable KASAN stack instrumentation, then for gcc we could do no
prompt and default value y, and for clang prompt and default value n.
This patch fixes the following compilation warning:
include/linux/kasan.h:333:30: warning: 'CONFIG_KASAN_STACK' is not defined, evaluates to 0 [-Wundef]
[akpm@linux-foundation.org: fix merge snafu]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=210221 [1]
Link: https://lkml.kernel.org/r/20210226012531.29231-1-walter-zh.wu@mediatek.com
Fixes: d9b571c885 ("kasan: fix KASAN_STACK dependency for HW_TAGS")
Signed-off-by: Walter Wu <walter-zh.wu@mediatek.com>
Suggested-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
gcc-11 adds support for -fsanitize=kernel-hwaddress, so it becomes
possible to enable CONFIG_KASAN_SW_TAGS.
Unfortunately this fails to build at the moment, because the
corresponding command line arguments use llvm specific syntax.
Change it to use the cc-param macro instead, which works on both clang
and gcc.
[elver@google.com: fixup for "kasan: fix hwasan build for gcc"]
Link: https://lkml.kernel.org/r/YHQZVfVVLE/LDK2v@elver.google.com
Link: https://lkml.kernel.org/r/20210323124112.1229772-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Acked-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix stray kernel-doc warnings in mm/ due to mis-typed or missing function
names.
Quietens these kernel-doc warnings:
mm/mmu_gather.c:264: warning: expecting prototype for tlb_gather_mmu(). Prototype was for __tlb_gather_mmu() instead
mm/oom_kill.c:180: warning: expecting prototype for Check whether unreclaimable slab amount is greater than(). Prototype was for should_dump_unreclaim_slab() instead
mm/shuffle.c:155: warning: expecting prototype for shuffle_free_memory(). Prototype was for __shuffle_free_memory() instead
Link: https://lkml.kernel.org/r/20210411210642.11362-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Daniel Borkmann says:
====================
pull-request: bpf 2021-04-17
The following pull-request contains BPF updates for your *net* tree.
We've added 10 non-merge commits during the last 9 day(s) which contain
a total of 8 files changed, 175 insertions(+), 111 deletions(-).
The main changes are:
1) Fix a potential NULL pointer dereference in libbpf's xsk
umem handling, from Ciara Loftus.
2) Mitigate a speculative oob read of up to map value size by
tightening the masking window, from Daniel Borkmann.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Claudiu Manoil says:
====================
net: gianfar: Drop GFAR_MQ_POLLING support
Drop long time obsolete "per NAPI multi-queue" support in gianfar,
and related (and undocumented) device tree properties.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
These are very old properties that were used by the "gianfar" ethernet
driver. They don't have documented bindings and are obsolete.
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Gianfar used to enable all 8 Rx queues (DMA rings) per
ethernet device, even though the controller can only
support 2 interrupt lines at most. This meant that
multiple Rx queues would have to be grouped per NAPI poll
routine, and the CPU would have to split the budget and
service them in a round robin manner. The overhead of
this scheme proved to outweight the potential benefits.
The alternative was to introduce the "Single Queue" polling
mode, supporting one Rx queue per NAPI, which became the
default packet processing option and helped improve the
performance of the driver.
MQ_POLLING also relies on undocumeted device tree properties
to specify how to map the 8 Rx and Tx queues to a given
interrupt line (aka "interrupt group"). Using module parameters
to enable this mode wasn't an option either. Long story short,
MQ_POLLING became obsolete, now it is just dead code, and no
one asked for it so far.
For the Tx queues, multi-queue support (more than 1 Tx queue
per CPU) could be revisited by adding tc MQPRIO support, but
again, one has to consider that there are only 2 interrupt lines.
So the NAPI poll routine would have to service multiple Tx rings.
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The recent patch that tied enabling of veth NAPI to the GRO flag also has
the nice side effect that a veth device can be the target of an
XDP_REDIRECT without an XDP program needing to be loaded on the peer
device. However, the patch adding this extra NAPI mode didn't actually
change the check in veth_xdp_xmit() to also look at the new NAPI pointer,
so let's fix that.
Fixes: 6788fa154546 ("veth: allow enabling NAPI even without XDP")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
__ipv6_dev_mc_dec() internally uses sleepable functions so that caller
must not acquire atomic locks. But caller, which is addrconf_verify_rtnl()
acquires rcu_read_lock_bh().
So this warning occurs in the __ipv6_dev_mc_dec().
Test commands:
ip netns add A
ip link add veth0 type veth peer name veth1
ip link set veth1 netns A
ip link set veth0 up
ip netns exec A ip link set veth1 up
ip a a 2001:db8::1/64 dev veth0 valid_lft 2 preferred_lft 1
Splat looks like:
============================
WARNING: suspicious RCU usage
5.12.0-rc6+ #515 Not tainted
-----------------------------
kernel/sched/core.c:8294 Illegal context switch in RCU-bh read-side
critical section!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
4 locks held by kworker/4:0/1997:
#0: ffff88810bd72d48 ((wq_completion)ipv6_addrconf){+.+.}-{0:0}, at:
process_one_work+0x761/0x1440
#1: ffff888105c8fe00 ((addr_chk_work).work){+.+.}-{0:0}, at:
process_one_work+0x795/0x1440
#2: ffffffffb9279fb0 (rtnl_mutex){+.+.}-{3:3}, at:
addrconf_verify_work+0xa/0x20
#3: ffffffffb8e30860 (rcu_read_lock_bh){....}-{1:2}, at:
addrconf_verify_rtnl+0x23/0xc60
stack backtrace:
CPU: 4 PID: 1997 Comm: kworker/4:0 Not tainted 5.12.0-rc6+ #515
Workqueue: ipv6_addrconf addrconf_verify_work
Call Trace:
dump_stack+0xa4/0xe5
___might_sleep+0x27d/0x2b0
__mutex_lock+0xc8/0x13f0
? lock_downgrade+0x690/0x690
? __ipv6_dev_mc_dec+0x49/0x2a0
? mark_held_locks+0xb7/0x120
? mutex_lock_io_nested+0x1270/0x1270
? lockdep_hardirqs_on_prepare+0x12c/0x3e0
? _raw_spin_unlock_irqrestore+0x47/0x50
? trace_hardirqs_on+0x41/0x120
? __wake_up_common_lock+0xc9/0x100
? __wake_up_common+0x620/0x620
? memset+0x1f/0x40
? netlink_broadcast_filtered+0x2c4/0xa70
? __ipv6_dev_mc_dec+0x49/0x2a0
__ipv6_dev_mc_dec+0x49/0x2a0
? netlink_broadcast_filtered+0x2f6/0xa70
addrconf_leave_solict.part.64+0xad/0xf0
? addrconf_join_solict.part.63+0xf0/0xf0
? nlmsg_notify+0x63/0x1b0
__ipv6_ifa_notify+0x22c/0x9c0
? inet6_fill_ifaddr+0xbe0/0xbe0
? lockdep_hardirqs_on_prepare+0x12c/0x3e0
? __local_bh_enable_ip+0xa5/0xf0
? ipv6_del_addr+0x347/0x870
ipv6_del_addr+0x3b1/0x870
? addrconf_ifdown+0xfe0/0xfe0
? rcu_read_lock_any_held.part.27+0x20/0x20
addrconf_verify_rtnl+0x8a9/0xc60
addrconf_verify_work+0xf/0x20
process_one_work+0x84c/0x1440
In order to avoid this problem, it uses rcu_read_unlock_bh() for
a short time. RCU is used for avoiding freeing
ifp(struct *inet6_ifaddr) while ifp is being used. But this will
not be released even if rcu_read_unlock_bh() is used.
Because before rcu_read_unlock_bh(), it uses in6_ifa_hold(ifp).
So this is safe.
Fixes: 63ed8de4be ("mld: add mc_lock for protecting per-interface mld data")
Suggested-by: Eric Dumazet <edumazet@google.com>
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alex Elder says:
====================
net: ipa: allow different firmware names
Add the ability to define a "firmware-name" property in the IPA DT
node, specifying an alternate name to use for the firmware file.
Used only if the AP (Trust Zone) does early IPA initialization.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
IPA initialization includes loading some firmware. This step is
done either by the modem or by the AP under Trust Zone. If the
AP loads firmware, the name of the firmware file is currently
hard-coded ("ipa_fws.mdt").
Add the ability to specify the relative path of the firmware file to
use in a property in the Device Tree IPA node. If the property is
not found (or if any other error occurs attempting to get it), fall
back to using a default relative path.
Use the "old" fixed name as the default. Rename the symbol that
represents this default to emphasize its purpose.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a new optional firmware-name property to the IPA DT node. It
is used only if the modem is not doing early initialization (i.e.,
if the modem-init property is not present). Its value is the name
of the firmware file to use; if it's not specified, a default name
("ipa_fws.mdt") is used.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In page_to_skb(), if we have enough tailroom to save skb_shared_info, we
can use build_skb to create skb directly. No need to alloc for
additional space. And it can save a 'frags slot', which is very friendly
to GRO.
Here, if the payload of the received package is too small (less than
GOOD_COPY_LEN), we still choose to copy it directly to the space got by
napi_alloc_skb. So we can reuse these pages.
Testing Machine:
The four queues of the network card are bound to the cpu1.
Test command:
for ((i=0;i<5;++i)); do sockperf tp --ip 192.168.122.64 -m 1000 -t 150& done
The size of the udp package is 1000, so in the case of this patch, there
will always be enough tailroom to use build_skb. The sent udp packet
will be discarded because there is no port to receive it. The irqsoftd
of the machine is 100%, we observe the received quantity displayed by
sar -n DEV 1:
no build_skb: 956864.00 rxpck/s
build_skb: 1158465.00 rxpck/s
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Suggested-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The MHI WWWAN control driver allows MHI QCOM-based modems to expose
different modem control protocols/ports via the WWAN framework, so that
userspace modem tools or daemon (e.g. ModemManager) can control WWAN
config and state (APN config, SMS, provider selection...). A QCOM-based
modem can expose one or several of the following protocols:
- AT: Well known AT commands interactive protocol (microcom, minicom...)
- MBIM: Mobile Broadband Interface Model (libmbim, mbimcli)
- QMI: QCOM MSM/Modem Interface (libqmi, qmicli)
- QCDM: QCOM Modem diagnostic interface (libqcdm)
- FIREHOSE: XML-based protocol for Modem firmware management
(qmi-firmware-update)
Note that this patch is mostly a rework of the earlier MHI UCI
tentative that was a generic interface for accessing MHI bus from
userspace. As suggested, this new version is WWAN specific and is
dedicated to only expose channels used for controlling a modem, and
for which related opensource userpace support exist.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This change introduces initial support for a WWAN framework. Given the
complexity and heterogeneity of existing WWAN hardwares and interfaces,
there is no strict definition of what a WWAN device is and how it should
be represented. It's often a collection of multiple devices that perform
the global WWAN feature (netdev, tty, chardev, etc).
One usual way to expose modem controls and configuration is via high
level protocols such as the well known AT command protocol, MBIM or
QMI. The USB modems started to expose them as character devices, and
user daemons such as ModemManager learnt to use them.
This initial version adds the concept of WWAN port, which is a logical
pipe to a modem control protocol. The protocols are rawly exposed to
user via character device, allowing straigthforward support in existing
tools (ModemManager, ofono...). The WWAN core takes care of the generic
part, including character device management, and relies on port driver
operations to receive/submit protocol data.
Since the different devices exposing protocols for a same WWAN hardware
do not necessarily know about each others (e.g. two different USB
interfaces, PCI/MHI channel devices...) and can be created/removed in
different orders, the WWAN core ensures that all WAN ports contributing
to the 'whole' WWAN feature are grouped under the same virtual WWAN
device, relying on the provided parent device (e.g. mhi controller,
USB device). It's a 'trick' I copied from Johannes's earlier WWAN
subsystem proposal.
This initial version is purposely minimalist, it's essentially moving
the generic part of the previously proposed mhi_wwan_ctrl driver inside
a common WWAN framework, but the implementation is open and flexible
enough to allow extension for further drivers.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add parser entries for different IPv4 IHL values.
Each entry will set the L4 header offset according to the IPv4 IHL field.
L3 header offset will set during the parsing of the IPv4 protocol.
Because of missed parser support for IP header length > 20, RX IPv4 checksum HW offload fails
and skb->ip_summed set to CHECKSUM_NONE(checksum done by Network stack).
This patch adds RX IPv4 checksum HW offload capability for frames with IP header length > 20.
v1 --> v2
- Improve commit message.
Suggested-by: Dana Vardi <danat@marvell.com>
Signed-off-by: Stefan Chulski <stefanc@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hayes Wang says:
====================
r8152: support new chips
Support new RTL8153 and RTL8156 series.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The vendor mode is not always at config #1, so it is necessary to
set the correct configuration number.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Support new firmware type and method for RTL8156 series.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Support RTL8153C, RTL8153D, RTL8156A, and RTL8156B. The RTL8156A
and RTL8156B are the 2.5G ethernet.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The different chips may have different requests when changing mtu.
Therefore, add a new help function of rtl_ops to change mtu. Besides,
reset the tx/rx after changing mtu.
Additionally, add mtu_to_size() and size_to_mtu() macros to simplify
the code.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use bits operations to record and check the firmware.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
