The hsr_ping test reports the following errors:
INFO: preparing interfaces for HSRv0.
INFO: Initial validation ping.
INFO: Longer ping test.
INFO: Cutting one link.
INFO: Delay the link and drop a few packages.
INFO: All good.
INFO: preparing interfaces for HSRv1.
RTNETLINK answers: File exists
RTNETLINK answers: File exists
RTNETLINK answers: File exists
RTNETLINK answers: File exists
RTNETLINK answers: File exists
RTNETLINK answers: File exists
Error: ipv4: Address already assigned.
Error: ipv6: address already assigned.
Error: ipv4: Address already assigned.
Error: ipv6: address already assigned.
Error: ipv4: Address already assigned.
Error: ipv6: address already assigned.
INFO: Initial validation ping.
That is because the cleanup code for the 2nd round test before
"setup_hsr_interfaces 1" is removed incorrectly in commit 680fda4f67
("test: hsr: Remove script code already implemented in lib.sh").
This patch fixes it by re-setup the namespaces using
setup_ns ns1 ns2 ns3
command before "setup_hsr_interfaces 1". It deletes previous namespaces
and create new ones.
Fixes: 680fda4f67 ("test: hsr: Remove script code already implemented in lib.sh")
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/6485d3005f467758d49f0f313c8c009759ba6b05.1716374462.git.tanggeliang@kylinos.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The "EZpad 6s Pro" uses the same touchscreen as the "EZpad 6 Pro B",
unlike the "Ezpad 6 Pro" which has its own touchscreen.
Signed-off-by: hmtheboy154 <buingoc67@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240527091447.248849-3-hdegoede@redhat.com
On x86/ACPI platforms touchscreens mostly just work without needing any
device/model specific configuration. But in some cases (mostly with Silead
and Goodix touchscreens) it is still necessary to manually specify various
touchscreen-properties on a per model basis.
touchscreen_dmi is a special place for DMI quirks for this, but it can be
challenging for users to figure out the right property values, especially
for Silead touchscreens where non of these can be read back from
the touchscreen-controller.
ATM users can only test touchscreen properties by editing touchscreen_dmi.c
and then building a completely new kernel which makes it unnecessary
difficult for users to test and submit properties when necessary for their
laptop / tablet model.
Add support for specifying properties on the kernel commandline to allow
users to easily figure out the right settings. See the added documentation
in kernel-parameters.txt for the commandline syntax.
Cc: Gregor Riepl <onitake@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240523143601.47555-1-hdegoede@redhat.com
Now that drivers/platform/x86/thinkpad_acpi.c uses
sparse_keymap_report_event(), it must select INPUT_SPARSEKMAP in its
Kconfig option otherwise the build fails with:
ld: vmlinux.o: in function `tpacpi_input_send_key':
thinkpad_acpi.c:(.text+0xd4d27f): undefined reference to `sparse_keymap_report_event'
ld: vmlinux.o: in function `hotkey_init':
thinkpad_acpi.c:(.init.text+0x66cb6): undefined reference to `sparse_keymap_setup'
Fixes: 42f7b965de ("platform/x86: thinkpad_acpi: Switch to using sparse-keymap helpers")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240522074813.379b9fc2@gandalf.local.home
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
In tpmi_sst_dev_remove(), tpmi_sst is dereferenced after being freed.
Fix this by reordering the kfree() post the dereference.
Fixes: 9d1d36268f ("platform/x86: ISST: Support partitioned systems")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20240517144946.289615-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
enic_set_vf_port assumes that the nl attribute IFLA_PORT_PROFILE
is of length PORT_PROFILE_MAX and that the nl attributes
IFLA_PORT_INSTANCE_UUID, IFLA_PORT_HOST_UUID are of length PORT_UUID_MAX.
These attributes are validated (in the function do_setlink in rtnetlink.c)
using the nla_policy ifla_port_policy. The policy defines IFLA_PORT_PROFILE
as NLA_STRING, IFLA_PORT_INSTANCE_UUID as NLA_BINARY and
IFLA_PORT_HOST_UUID as NLA_STRING. That means that the length validation
using the policy is for the max size of the attributes and not on exact
size so the length of these attributes might be less than the sizes that
enic_set_vf_port expects. This might cause an out of bands
read access in the memcpys of the data of these
attributes in enic_set_vf_port.
Fixes: f8bd909183 ("net: Add ndo_{set|get}_vf_port support for enic dynamic vnics")
Signed-off-by: Roded Zats <rzats@paloaltonetworks.com>
Link: https://lore.kernel.org/r/20240522073044.33519-1-rzats@paloaltonetworks.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Commit b8b8b4e0c0 ("ata: ahci: Add Intel Alder Lake-P AHCI controller
to low power chipsets list") added Intel Alder Lake to the ahci_pci_tbl.
Because of the way that the Intel PCS quirk was implemented, having
an explicit entry in the ahci_pci_tbl caused the Intel PCS quirk to
be applied. (The quirk was not being applied if there was no explict
entry.)
Thus, entries that were added to the ahci_pci_tbl also got the Intel
PCS quirk applied.
The quirk was cleaned up in commit 7edbb60592 ("ahci: clean up
intel_pcs_quirk"), such that it is clear which entries that actually
applies the Intel PCS quirk.
Newer Intel AHCI controllers do not need the Intel PCS quirk,
and applying it when not needed actually breaks some platforms.
Do not apply the Intel PCS quirk for Intel Alder Lake.
This is in line with how things worked before commit b8b8b4e0c0 ("ata:
ahci: Add Intel Alder Lake-P AHCI controller to low power chipsets list"),
such that certain platforms using Intel Alder Lake will work once again.
Cc: stable@vger.kernel.org # 6.7
Fixes: b8b8b4e0c0 ("ata: ahci: Add Intel Alder Lake-P AHCI controller to low power chipsets list")
Signed-off-by: Jason Nader <dev@kayoway.com>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
The 2024 ASUS ROG G814J model is much the same as the 2023 model
and the 2023 16" version. We can use the same Cirrus Amp quirk.
Fixes: 811dd426a9 ("ALSA: hda/realtek: Add quirks for Asus ROG 2024 laptops using CS35L41")
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20240526091032.114545-1-luke@ljones.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The card-specific debugfs entries are removed at the last stage of
card free phase, and it's performed after synchronization of the
closes of all opened fds. This works fine for most cases, but it can
be potentially problematic for a hotplug device like USB-audio. Due
to the nature of snd_card_free_when_closed(), the card free isn't
called immediately after the driver removal for a hotplug device, but
it's left until the last fd is closed. It implies that the card
debugfs entries also remain. Meanwhile, when a new device is inserted
before the last close and the very same card slot is assigned, the
driver tries to create the card debugfs root again on the very same
path. This conflicts with the remaining entry, and results in the
kernel warning such as:
debugfs: Directory 'card0' with parent 'sound' already present!
with the missing debugfs entry afterwards.
For avoiding such conflicts, remove debugfs entries at the device
disconnection phase instead. The jack kctl debugfs entries get
removed in snd_jack_dev_disconnect() instead of each kctl
private_free.
Fixes: 2d670ea2bd ("ALSA: jack: implement software jack injection via debugfs")
Link: https://lore.kernel.org/r/20240524151256.32521-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fix the 'make W=1' warnings:
WARNING: modpost: missing MODULE_DESCRIPTION() in fs/smb/common/cifs_arc4.o
WARNING: modpost: missing MODULE_DESCRIPTION() in fs/smb/common/cifs_md4.o
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
copy_page_from_iter_atomic() will be removed at some point.
Also fixup a comment for folios.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Currently, when an adapter defines a max_write_len quirk,
the data will be chunked into data sizes equal to the
max_write_len quirk value. But the payload will be increased by
the size of the register address before transmission. The
resulting value always ends up larger than the limit set
by the quirk.
Avoid this error by setting regmap's max_write to the quirk's
max_write_len minus the number of bytes for the register and
padding. This allows the chunking to work correctly for this
limited case without impacting other use-cases.
Signed-off-by: Jim Wylder <jwylder@google.com>
Link: https://msgid.link/r/20240523211437.2839942-1-jwylder@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
percpu.h depends on smp.h, but doesn't include it directly because of
circular header dependency issues; percpu.h is needed in a bunch of low
level headers.
This fixes a randconfig build error on mips:
include/linux/alloc_tag.h: In function '__alloc_tag_ref_set':
include/asm-generic/percpu.h:31:40: error: implicit declaration of function 'raw_smp_processor_id' [-Werror=implicit-function-declaration]
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 24e44cc22a ("mm: percpu: enable per-cpu allocation tagging")
Closes: https://lore.kernel.org/oe-kbuild-all/202405210052.DIrMXJNz-lkp@intel.com/
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
"This made a simple 'perf record -e cycles:pp make -j199' stop working on
the Ampere ARM64 system Linus uses to test ARM64 kernels, as discussed
at length in the threads in the Link tags below.
The fix provided by Ian wasn't acceptable and work to fix this will take
time we don't have at this point, so lets revert this and work on it on
the next devel cycle."
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCZlMhdgAKCRCyPKLppCJ+
JzCNAPwM7gQLjeoCdkn9KDl1fj1R7/jBE/TsVqP9s1htc9vJEgD/UgLDkpdzlxBC
HbndVTOrnvyV9ySA28654ODHpQxmXwM=
=WJwT
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v6.10-1-2024-05-26' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tool fix from Arnaldo Carvalho de Melo:
"Revert a patch causing a regression.
This made a simple 'perf record -e cycles:pp make -j199' stop working
on the Ampere ARM64 system Linus uses to test ARM64 kernels".
* tag 'perf-tools-fixes-for-v6.10-1-2024-05-26' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
Revert "perf parse-events: Prefer sysfs/JSON hardware events over legacy"
Superblock downgrade entries are only two byte aligned, but section
sizes are 8 byte aligned, which means we have to be careful about
overrun checks; an entry that crosses the end of the section is allowed
(and ignored) as long as it has zero errors.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This reverts commit 617824a7f0.
This made a simple 'perf record -e cycles:pp make -j199' stop working on
the Ampere ARM64 system Linus uses to test ARM64 kernels, as discussed
at length in the threads in the Link tags below.
The fix provided by Ian wasn't acceptable and work to fix this will take
time we don't have at this point, so lets revert this and work on it on
the next devel cycle.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Cc: Ethan Adams <j.ethan.adams@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Tycho Andersen <tycho@tycho.pizza>
Cc: Yang Jihong <yangjihong@bytedance.com>
Link: https://lore.kernel.org/lkml/CAHk-=wi5Ri=yR2jBVk-4HzTzpoAWOgstr1LEvg_-OXtJvXXJOA@mail.gmail.com
Link: https://lore.kernel.org/lkml/CAHk-=wiWvtFyedDNpoV7a8Fq_FpbB+F5KmWK2xPY3QoYseOf_A@mail.gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A potential deadlock was reported with the config file at
https://web.archive.org/web/20240522052129/https://0x0.st/XPN_.txt
In this particular configuration, the deadlock doesn't exist because
the warning triggered at a point before modules were even available.
However, the deadlock can be real because any module loaded would
invoke async_synchronize_full.
The issue is spurious for software crypto algorithms which aren't
themselves involved in async probing. However, it would be hard to
avoid for a PCI crypto driver using async probing.
In this particular call trace, the problem is easily avoided because
the only reason the module is being requested during probing is the
add_early_randomness call in the hwrng core. This feature is
vestigial since there is now a kernel thread dedicated to doing
exactly this.
So remove add_early_randomness as it is no longer needed.
Reported-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reported-by: Eric Biggers <ebiggers@kernel.org>
Fixes: 1b6d7f9eb1 ("tpm: add session encryption protection to tpm2_get_random()")
Link: https://lore.kernel.org/r/119dc5ed-f159-41be-9dda-1a056f29888d@notapiano/
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-----BEGIN PGP SIGNATURE-----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=p0nS
-----END PGP SIGNATURE-----
Merge tag '6.10-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- two important netfs integration fixes - including for a data
corruption and also fixes for multiple xfstests
- reenable swap support over SMB3
* tag '6.10-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Fix missing set of remote_i_size
cifs: Fix smb3_insert_range() to move the zero_point
cifs: update internal version number
smb3: reenable swapfiles over SMB3 mounts
A few nilfs2 fixes, the remainder are for MM: a couple of selftests fixes,
various singletons fixing various issues in various parts.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZlIOUgAKCRDdBJ7gKXxA
jrYnAP9UeOw8YchTIsjEllmAbTMAqWGI+54CU/qD78jdIHoVWAEAmp0QqgFW3r2p
jze4jBkh3lGQjykTjkUskaR71h9AZww=
=AHeV
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2024-05-25-09-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"16 hotfixes, 11 of which are cc:stable.
A few nilfs2 fixes, the remainder are for MM: a couple of selftests
fixes, various singletons fixing various issues in various parts"
* tag 'mm-hotfixes-stable-2024-05-25-09-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/ksm: fix possible UAF of stable_node
mm/memory-failure: fix handling of dissolved but not taken off from buddy pages
mm: /proc/pid/smaps_rollup: avoid skipping vma after getting mmap_lock again
nilfs2: fix potential hang in nilfs_detach_log_writer()
nilfs2: fix unexpected freezing of nilfs_segctor_sync()
nilfs2: fix use-after-free of timer for log writer thread
selftests/mm: fix build warnings on ppc64
arm64: patching: fix handling of execmem addresses
selftests/mm: compaction_test: fix bogus test success and reduce probability of OOM-killer invocation
selftests/mm: compaction_test: fix incorrect write of zero to nr_hugepages
selftests/mm: compaction_test: fix bogus test success on Aarch64
mailmap: update email address for Satya Priya
mm/huge_memory: don't unpoison huge_zero_folio
kasan, fortify: properly rename memintrinsics
lib: add version into /proc/allocinfo output
mm/vmalloc: fix vmalloc which may return null if called with __GFP_NOFAIL
- Fix x86 IRQ vector leak caused by a CPU offlining race
- Fix build failure in the riscv-imsic irqchip driver
caused by an API-change semantic conflict
- Fix use-after-free in irq_find_at_or_after()
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=vxJh
-----END PGP SIGNATURE-----
Merge tag 'irq-urgent-2024-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Ingo Molnar:
- Fix x86 IRQ vector leak caused by a CPU offlining race
- Fix build failure in the riscv-imsic irqchip driver
caused by an API-change semantic conflict
- Fix use-after-free in irq_find_at_or_after()
* tag 'irq-urgent-2024-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/irqdesc: Prevent use-after-free in irq_find_at_or_after()
genirq/cpuhotplug, x86/vector: Prevent vector leak during CPU offline
irqchip/riscv-imsic: Fixup riscv_ipi_set_virq_range() conflict
- Fix regressions of the new x86 CPU VFM (vendor/family/model)
enumeration/matching code
- Fix crash kernel detection on buggy firmware with
non-compliant ACPI MADT tables
- Address Kconfig warning
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=nIcm
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2024-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
- Fix regressions of the new x86 CPU VFM (vendor/family/model)
enumeration/matching code
- Fix crash kernel detection on buggy firmware with
non-compliant ACPI MADT tables
- Address Kconfig warning
* tag 'x86-urgent-2024-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Fix x86_match_cpu() to match just X86_VENDOR_INTEL
crypto: x86/aes-xts - switch to new Intel CPU model defines
x86/topology: Handle bogus ACPI tables correctly
x86/kconfig: Select ARCH_WANT_FRAME_POINTERS again when UNWINDER_FRAME_POINTER=y
These changes are mostly updates for deprecated interfaces,
platform.remove and converting from a tasklet to a BH workqueue. Also
use HAS_IOPORT for disabling inb()/outb().
-corey
-----BEGIN PGP SIGNATURE-----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=IPex
-----END PGP SIGNATURE-----
Merge tag 'for-linus-6.10-1' of https://github.com/cminyard/linux-ipmi
Pull ipmi updates from Corey Minyard:
"Mostly updates for deprecated interfaces, platform.remove and
converting from a tasklet to a BH workqueue.
Also use HAS_IOPORT for disabling inb()/outb()"
* tag 'for-linus-6.10-1' of https://github.com/cminyard/linux-ipmi:
ipmi: kcs_bmc_npcm7xx: Convert to platform remove callback returning void
ipmi: kcs_bmc_aspeed: Convert to platform remove callback returning void
ipmi: ipmi_ssif: Convert to platform remove callback returning void
ipmi: ipmi_si_platform: Convert to platform remove callback returning void
ipmi: ipmi_powernv: Convert to platform remove callback returning void
ipmi: bt-bmc: Convert to platform remove callback returning void
char: ipmi: handle HAS_IOPORT dependencies
ipmi: Convert from tasklet to BH workqueue
checks based on MDS auth caps which were recently made available to
clients. This is needed to prevent scenarios where the MDS quietly
discards updates that a UID-restricted client previously (wrongfully)
acked to the user. Other than that, just a documentation fixup.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAmZRsm0THGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzi6++B/4o7j4CNzjJcBw9UgxEUugwJYBe2Ht3
vSTUkHD9NILVgrYSHNhgkCdvU8ckv8Sd+7W/Kb0BC/GRyQd57F7zoM6mvR1WMozt
lLbYU/kdVI+TcIY2bhupMma5f+nWv6vIBTzca78UhogEBuIEYHAG3BnNaT/AEqF+
yZ3uQEVQ2bHmwbPn3A5dibYxOR8zLyhmaq/RUvqpiiYcSkEfZ6QqKiMlZkcVD7F8
c+NfjwXXGNTXDhfIbG4VndQi7xLXk3GI5E8xvdo2ALwumfp2KdVlMEYT8SHggSPS
A8bWq+d5o7uVV6WviNK63XcGRpadCSSSL310vR78K+tNIIq5dnI81IsU
=6c1e
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-6.10-rc1' of https://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
"A series from Xiubo that adds support for additional access checks
based on MDS auth caps which were recently made available to clients.
This is needed to prevent scenarios where the MDS quietly discards
updates that a UID-restricted client previously (wrongfully) acked to
the user.
Other than that, just a documentation fixup"
* tag 'ceph-for-6.10-rc1' of https://github.com/ceph/ceph-client:
doc: ceph: update userspace command to get CephFS metadata
ceph: add CEPHFS_FEATURE_MDS_AUTH_CAPS_CHECK feature bit
ceph: check the cephx mds auth access for async dirop
ceph: check the cephx mds auth access for open
ceph: check the cephx mds auth access for setattr
ceph: add ceph_mds_check_access() helper
ceph: save cap_auths in MDS client when session is opened
-----BEGIN PGP SIGNATURE-----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=IALr
-----END PGP SIGNATURE-----
Merge tag 'ntfs3_for_6.10' of https://github.com/Paragon-Software-Group/linux-ntfs3
Pull ntfs3 updates from Konstantin Komarov:
"Fixes:
- reusing of the file index (could cause the file to be trimmed)
- infinite dir enumeration
- taking DOS names into account during link counting
- le32_to_cpu conversion, 32 bit overflow, NULL check
- some code was refactored
Changes:
- removed max link count info display during driver init
Remove:
- atomic_open has been removed for lack of use"
* tag 'ntfs3_for_6.10' of https://github.com/Paragon-Software-Group/linux-ntfs3:
fs/ntfs3: Break dir enumeration if directory contents error
fs/ntfs3: Fix case when index is reused during tree transformation
fs/ntfs3: Mark volume as dirty if xattr is broken
fs/ntfs3: Always make file nonresident on fallocate call
fs/ntfs3: Redesign ntfs_create_inode to return error code instead of inode
fs/ntfs3: Use variable length array instead of fixed size
fs/ntfs3: Use 64 bit variable to avoid 32 bit overflow
fs/ntfs3: Check 'folio' pointer for NULL
fs/ntfs3: Missed le32_to_cpu conversion
fs/ntfs3: Remove max link count info display during driver init
fs/ntfs3: Taking DOS names into account during link counting
fs/ntfs3: remove atomic_open
fs/ntfs3: use kcalloc() instead of kzalloc()
-----BEGIN PGP SIGNATURE-----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=JStz
-----END PGP SIGNATURE-----
Merge tag '6.10-rc-ksmbd-server-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
"Two ksmbd server fixes, both for stable"
* tag '6.10-rc-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: ignore trailing slashes in share paths
ksmbd: avoid to send duplicate oplock break notifications
New driver:
- Epson RX8111
Drivers:
- Many Device Tree bindings conversions to dtschema
- pcf8563: wakeup-source support
-----BEGIN PGP SIGNATURE-----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=Kclo
-----END PGP SIGNATURE-----
Merge tag 'rtc-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"There is one new driver and then most of the changes are the device
tree bindings conversions to yaml.
New driver:
- Epson RX8111
Drivers:
- Many Device Tree bindings conversions to dtschema
- pcf8563: wakeup-source support"
* tag 'rtc-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
pcf8563: add wakeup-source support
rtc: rx8111: handle VLOW flag
rtc: rx8111: demote warnings to debug level
rtc: rx6110: Constify struct regmap_config
dt-bindings: rtc: convert trivial devices into dtschema
dt-bindings: rtc: stmp3xxx-rtc: convert to dtschema
dt-bindings: rtc: pxa-rtc: convert to dtschema
rtc: Add driver for Epson RX8111
dt-bindings: rtc: Add Epson RX8111
rtc: mcp795: drop unneeded MODULE_ALIAS
rtc: nuvoton: Modify part number value
rtc: test: Split rtc unit test into slow and normal speed test
dt-bindings: rtc: nxp,lpc1788-rtc: convert to dtschema
dt-bindings: rtc: digicolor-rtc: move to trivial-rtc
dt-bindings: rtc: alphascale,asm9260-rtc: convert to dtschema
dt-bindings: rtc: armada-380-rtc: convert to dtschema
rtc: cros-ec: provide ID table for avoiding fallback match
Core:
- Allow device driver to trigger controller runtime PM
Drivers:
- dw: hot-join support
- svc: better IBI handling
-----BEGIN PGP SIGNATURE-----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=EmUy
-----END PGP SIGNATURE-----
Merge tag 'i3c/for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c updates from Alexandre Belloni:
"Runtime PM (power management) is improved and hot-join support has
been added to the dw controller driver.
Core:
- Allow device driver to trigger controller runtime PM
Drivers:
- dw: hot-join support
- svc: better IBI handling"
* tag 'i3c/for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: dw: Add hot-join support.
i3c: master: Enable runtime PM for master controller
i3c: master: svc: fix invalidate IBI type and miss call client IBI handler
i3c: master: svc: change ENXIO to EAGAIN when IBI occurs during start frame
i3c: Add comment for -EAGAIN in i3c_device_do_priv_xfers()
- Fixes for -Wmissing-prototypes warnings and further cleanup
- Remove callback returning void from rtc and virtio drivers
- Fix bash location
-----BEGIN PGP SIGNATURE-----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=umlG
-----END PGP SIGNATURE-----
Merge tag 'uml-for-linus-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux
Pull UML updates from Richard Weinberger:
- Fixes for -Wmissing-prototypes warnings and further cleanup
- Remove callback returning void from rtc and virtio drivers
- Fix bash location
* tag 'uml-for-linus-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux: (26 commits)
um: virtio_uml: Convert to platform remove callback returning void
um: rtc: Convert to platform remove callback returning void
um: Remove unused do_get_thread_area function
um: Fix -Wmissing-prototypes warnings for __vdso_*
um: Add an internal header shared among the user code
um: Fix the declaration of kasan_map_memory
um: Fix the -Wmissing-prototypes warning for get_thread_reg
um: Fix the -Wmissing-prototypes warning for __switch_mm
um: Fix -Wmissing-prototypes warnings for (rt_)sigreturn
um: Stop tracking host PID in cpu_tasks
um: process: remove unused 'n' variable
um: vector: remove unused len variable/calculation
um: vector: fix bpfflash parameter evaluation
um: slirp: remove set but unused variable 'pid'
um: signal: move pid variable where needed
um: Makefile: use bash from the environment
um: Add winch to winch_handlers before registering winch IRQ
um: Fix -Wmissing-prototypes warnings for __warp_* and foo
um: Fix -Wmissing-prototypes warnings for text_poke*
um: Move declarations to proper headers
...
When running Cilium connectivity test suite with netkit in L2 mode, we
found that compared to tcx a few tests were failing which pushed traffic
into an L7 proxy sitting in host namespace. The problem in particular is
around the invocation of eth_type_trans() in netkit.
In case of tcx, this is run before the tcx ingress is triggered inside
host namespace and thus if the BPF program uses the bpf_skb_change_type()
helper the newly set type is retained. However, in case of netkit, the
late eth_type_trans() invocation overrides the earlier decision from the
BPF program which eventually leads to the test failure.
Instead of eth_type_trans(), split out the relevant parts, meaning, reset
of mac header and call to eth_skb_pkt_type() before the BPF program is run
in order to have the same behavior as with tcx, and refactor a small helper
called eth_skb_pull_mac() which is run in case it's passed up the stack
where the mac header must be pulled. With this all connectivity tests pass.
Fixes: 35dfaad718 ("netkit, bpf: Add bpf programmable net device")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20240524163619.26001-2-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When running Cilium connectivity test suite with netkit in L2 mode, we
found that it is expected to be able to specify a custom MAC address for
the devices, in particular, cilium-cni obtains the specified MAC address
by querying the endpoint and sets the MAC address of the interface inside
the Pod. Thus, fix the missing support in netkit for L2 mode.
Fixes: 35dfaad718 ("netkit, bpf: Add bpf programmable net device")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20240524163619.26001-1-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Andrii Nakryiko says:
====================
Fix BPF multi-uprobe PID filtering logic
It turns out that current implementation of multi-uprobe PID filtering logic
is broken. It filters by thread, while the promise is filtering by process.
Patch #1 fixes the logic trivially. The rest is testing and mitigations that
are necessary for libbpf to not break users of USDT programs.
v1->v2:
- fix selftest in last patch (CI);
- use semicolon in patch #3 (Jiri).
====================
Link: https://lore.kernel.org/r/20240521163401.3005045-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Validate libbpf's USDT-over-multi-uprobe logic by adding USDTs to
existing multi-uprobe tests. This checks correct libbpf fallback to
singular uprobes (when run on older kernels with buggy PID filtering).
We reuse already established child process and child thread testing
infrastructure, so additions are minimal. These test fail on either
older kernels or older version of libbpf that doesn't detect PID
filtering problems.
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240521163401.3005045-6-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Extend existing multi-uprobe tests to test that PID filtering works
correctly. We already have child *process* tests, but we need also child
*thread* tests. This patch adds spawn_thread() helper to start child
thread, wait for it to be ready, and then instruct it to trigger desired
uprobes.
Additionally, we extend BPF-side code to track thread ID, not just
process ID. Also we detect whether extraneous triggerings with
unexpected process IDs happened, and validate that none of that happened
in practice.
These changes prove that fixed PID filtering logic for multi-uprobe
works as expected. These tests fail on old kernels.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20240521163401.3005045-5-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Libbpf is automatically (and transparently to user) detecting
multi-uprobe support in the kernel, and, if supported, uses
multi-uprobes to improve USDT attachment speed.
USDTs can be attached system-wide or for the specific process by PID. In
the latter case, we rely on correct kernel logic of not triggering USDT
for unrelated processes.
As such, on older kernels that do support multi-uprobes, but still have
broken PID filtering logic, we need to fall back to singular uprobes.
Unfortunately, whether user is using PID filtering or not is known at
the attachment time, which happens after relevant BPF programs were
loaded into the kernel. Also unfortunately, we need to make a call
whether to use multi-uprobes or singular uprobe for SEC("usdt") programs
during BPF object load time, at which point we have no information about
possible PID filtering.
The distinction between single and multi-uprobes is small, but important
for the kernel. Multi-uprobes get BPF_TRACE_UPROBE_MULTI attach type,
and kernel internally substitiute different implementation of some of
BPF helpers (e.g., bpf_get_attach_cookie()) depending on whether uprobe
is multi or singular. So, multi-uprobes and singular uprobes cannot be
intermixed.
All the above implies that we have to make an early and conservative
call about the use of multi-uprobes. And so this patch modifies libbpf's
existing feature detector for multi-uprobe support to also check correct
PID filtering. If PID filtering is not yet fixed, we fall back to
singular uprobes for USDTs.
This extension to feature detection is simple thanks to kernel's -EINVAL
addition for pid < 0.
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240521163401.3005045-4-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
get_pid_task() internally already calls rcu_read_lock() and
rcu_read_unlock(), so there is no point to do this one extra time.
This is a drive-by improvement and has no correctness implications.
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240521163401.3005045-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Current implementation of PID filtering logic for multi-uprobes in
uprobe_prog_run() is filtering down to exact *thread*, while the intent
for PID filtering it to filter by *process* instead. The check in
uprobe_prog_run() also differs from the analogous one in
uprobe_multi_link_filter() for some reason. The latter is correct,
checking task->mm, not the task itself.
Fix the check in uprobe_prog_run() to perform the same task->mm check.
While doing this, we also update get_pid_task() use to use PIDTYPE_TGID
type of lookup, given the intent is to get a representative task of an
entire process. This doesn't change behavior, but seems more logical. It
would hold task group leader task now, not any random thread task.
Last but not least, given multi-uprobe support is half-broken due to
this PID filtering logic (depending on whether PID filtering is
important or not), we need to make it easy for user space consumers
(including libbpf) to easily detect whether PID filtering logic was
already fixed.
We do it here by adding an early check on passed pid parameter. If it's
negative (and so has no chance of being a valid PID), we return -EINVAL.
Previous behavior would eventually return -ESRCH ("No process found"),
given there can't be any process with negative PID. This subtle change
won't make any practical change in behavior, but will allow applications
to detect PID filtering fixes easily. Libbpf fixes take advantage of
this in the next patch.
Cc: stable@vger.kernel.org
Acked-by: Jiri Olsa <jolsa@kernel.org>
Fixes: b733eeade4 ("bpf: Add pid filter support for uprobe_multi link")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240521163401.3005045-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Don't cross a mountpoint that explicitly specifies a backup volume
(target is <vol>.backup) when starting from a backup volume.
It it not uncommon to mount a volume's backup directly in the volume
itself. This can cause tools that are not paying attention to get
into a loop mounting the volume onto itself as they attempt to
traverse the tree, leading to a variety of problems.
This doesn't prevent the general case of loops in a sequence of
mountpoints, but addresses a common special case in the same way
as other afs clients.
Reported-by: Jan Henrik Sylvester <jan.henrik.sylvester@uni-hamburg.de>
Link: http://lists.infradead.org/pipermail/linux-afs/2024-May/008454.html
Reported-by: Markus Suvanto <markus.suvanto@gmail.com>
Link: http://lists.infradead.org/pipermail/linux-afs/2024-February/008074.html
Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/768760.1716567475@warthog.procyon.org.uk
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
nouveau:
- fix bo metadata uAPI for vm bind
panthor:
- Fixes for panthor's heap logical block.
- Reset on unrecoverable fault
- Fix VM references.
- Reset fix.
xlnx:
- xlnx compile and doc fixes.
amdgpu:
- Handle vbios table integrated info v2.3
amdkfd:
- Handle duplicate BOs in reserve_bo_and_cond_vms
- Handle memory limitations on small APUs
dp/mst:
- MST null deref fix.
bridge:
- Don't let next bridge create connector in adv7511 to make probe work.
-----BEGIN PGP SIGNATURE-----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=pexB
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2024-05-25' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Some fixes for the end of the merge window, mostly amdgpu and panthor,
with one nouveau uAPI change that fixes a bad decision we made a few
months back.
nouveau:
- fix bo metadata uAPI for vm bind
panthor:
- Fixes for panthor's heap logical block.
- Reset on unrecoverable fault
- Fix VM references.
- Reset fix.
xlnx:
- xlnx compile and doc fixes.
amdgpu:
- Handle vbios table integrated info v2.3
amdkfd:
- Handle duplicate BOs in reserve_bo_and_cond_vms
- Handle memory limitations on small APUs
dp/mst:
- MST null deref fix.
bridge:
- Don't let next bridge create connector in adv7511 to make probe
work"
* tag 'drm-next-2024-05-25' of https://gitlab.freedesktop.org/drm/kernel:
drm/amdgpu/atomfirmware: add intergrated info v2.3 table
drm/mst: Fix NULL pointer dereference at drm_dp_add_payload_part2
drm/amdkfd: Let VRAM allocations go to GTT domain on small APUs
drm/amdkfd: handle duplicate BOs in reserve_bo_and_cond_vms
drm/bridge: adv7511: Attach next bridge without creating connector
drm/buddy: Fix the warn on's during force merge
drm/nouveau: use tile_mode and pte_kind for VM_BIND bo allocations
drm/panthor: Call panthor_sched_post_reset() even if the reset failed
drm/panthor: Reset the FW VM to NULL on unplug
drm/panthor: Keep a ref to the VM at the panthor_kernel_bo level
drm/panthor: Force an immediate reset on unrecoverable faults
drm/panthor: Document drm_panthor_tiler_heap_destroy::handle validity constraints
drm/panthor: Fix an off-by-one in the heap context retrieval logic
drm/panthor: Relax the constraints on the tiler chunk size
drm/panthor: Make sure the tiler initial/max chunks are consistent
drm/panthor: Fix tiler OOM handling to allow incremental rendering
drm: xlnx: zynqmp_dpsub: Fix compilation error
drm: xlnx: zynqmp_dpsub: Fix few function comments
Occasionally, the generic/001 xfstest will fail indicating corruption in
one of the copy chains when run on cifs against a server that supports
FSCTL_DUPLICATE_EXTENTS_TO_FILE (eg. Samba with a share on btrfs). The
problem is that the remote_i_size value isn't updated by cifs_setsize()
when called by smb2_duplicate_extents(), but i_size *is*.
This may cause cifs_remap_file_range() to then skip the bit after calling
->duplicate_extents() that sets sizes.
Fix this by calling netfs_resize_file() in smb2_duplicate_extents() before
calling cifs_setsize() to set i_size.
This means we don't then need to call netfs_resize_file() upon return from
->duplicate_extents(), but we also fix the test to compare against the pre-dup
inode size.
[Note that this goes back before the addition of remote_i_size with the
netfs_inode struct. It should probably have been setting cifsi->server_eof
previously.]
Fixes: cfc63fc812 ("smb3: fix cached file size problems in duplicate extents (reflink)")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <sfrench@samba.org>
cc: Paulo Alcantara <pc@manguebit.com>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
Signed-off-by: Steve French <stfrench@microsoft.com>
Fix smb3_insert_range() to move the zero_point over to the new EOF.
Without this, generic/147 fails as reads of data beyond the old EOF point
return zeroes.
Fixes: 3ee1a1fc39 ("cifs: Cut over to using netfslib")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
Signed-off-by: Steve French <stfrench@microsoft.com>
