We're now guaranteed to no longer race against prepare_fb/cleanup_fb,
which means we can access ->vaddr without having to hold a lock.
Before the previous patches it was fairly easy to observe the cursor
->vaddr being invalid, but that's now gone, so we can upgrade to a
full WARN_ON.
Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Cc: Haneen Mohammed <hamohammed.sa@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Tested-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190606222751.32567-11-daniel.vetter@ffwll.ch
The crc computation worker needs to be able to get at some data
structures and framebuffer mappings, while potentially more atomic
updates are going on. The solution thus far is to copy relevant bits
around, but that's very tedious.
Here's a new approach, which tries to be more clever, but relies on a
few not-so-obvious things:
- crtc_state is always updated when a plane_state changes. Therefore
we can just stuff plane_state pointers into a crtc_state. That
solves the problem of easily getting at the needed plane_states.
- with the flushing changes from previous patches the above also holds
without races due to the next atomic update being a bit eager with
cleaning up pending work - we always wait for all crc work items to
complete before unmapping framebuffers.
- we also need to make sure that the hrtimer fires off the right
worker. Keep a new distinct crc_state pointer, under the
vkms_output->lock protection for this. Note that crtc->state is
updated very early in the atomic commit, way before we arm the
vblank event - the vblank event should always match the buffers we
use to compute the crc. This also solves an issue in the hrtimer,
where we've accessed drm_crtc->state without holding the right locks
(we held none - oops).
- in the worker itself we can then just access the plane states we
need, again solving a bunch of ordering and locking issues.
Accessing plane->state requires locks, accessing the private
vkms_crtc_state->active_planes pointer only requires that the memory
doesn't get freed too early.
The idea behind vkms_crtc_state->active_planes is that this would
contain all visible planes, in z-order, as a first step towards a more
generic blending implementation.
Note that this patch also fixes races between prepare_fb/cleanup_fb
and the crc worker accessing ->vaddr.
Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Cc: Haneen Mohammed <hamohammed.sa@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Tested-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190606222751.32567-10-daniel.vetter@ffwll.ch
The crc core code can cope with some late crc, the race is kinda
unavoidable. So no need to flush pending workers, they'll complete in
time.
Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Cc: Haneen Mohammed <hamohammed.sa@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Tested-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190606222751.32567-8-daniel.vetter@ffwll.ch
Currently, we flush pending CRC workers very late in the commit flow,
when we destroy all the old crtc states. Unfortunately, at that point,
the framebuffers are already unpinned (and our vaddr possible gone), so
this isn't good. Also, the plane_states we need might also already be
cleaned up, since cleanup order of state structures isn't well defined.
Fix this by waiting for all CRC workers of the old state to complete
before we start any of the cleanup work. For correct ordering and
avoiding races, we can only flush_work after
drm_atomic_helper_wait_for_vblanks() since we know that all subsequent
queue_work will be for the new state. Only once that's done is
flush_work() useful, before that we might flush the work, and then right
after the hrtimer that simulates vblank queues it again. Every time you
have a flush_work before cleaning up the work structure, the following
sequence must be obeyed, or it can go wrong:
1. Make sure no one else can re-queue the work anymore (in our case
that's done by a combination of first updating output->crc_state and
then waiting for the vblank to pass to make sure the hrtimer has noticed
that change).
2. flush_work()
3. Actually clean up stuff (which isn't done here).
Doing the flush_work before we even completed the output->state update,
much less waited for the vblank to make sure that's happened, missed the
point.
Note that this is not yet race-free because of the hrtimer and crc
worker look at the wrong state pointers, but that will be fixed in
subsequent patches.
Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Cc: Haneen Mohammed <hamohammed.sa@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Tested-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190606222751.32567-7-daniel.vetter@ffwll.ch
Just prep work, more will be done here in following patches.
Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Cc: Haneen Mohammed <hamohammed.sa@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Tested-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190606222751.32567-6-daniel.vetter@ffwll.ch
Plus add a comment about what it actually protects. It's very little.
Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Cc: Haneen Mohammed <hamohammed.sa@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Tested-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190606222751.32567-4-daniel.vetter@ffwll.ch
The worker is always in process context, no need for the _irqsafe
version. Same for the set_source callback, that's only called from the
debugfs handler in a syscall.
Cc: Shayenne Moura <shayenneluzmoura@gmail.com>
Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Cc: Haneen Mohammed <hamohammed.sa@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Tested-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190606222751.32567-3-daniel.vetter@ffwll.ch
The issue we have is that the crc worker might fall behind. We've
tried to handle this by tracking both the earliest frame for which it
still needs to compute a crc, and the last one. Plus when the
crtc_state changes, we have a new work item, which are all run in
order due to the ordered workqueue we allocate for each vkms crtc.
Trouble is there's been a few small issues in the current code:
- we need to capture frame_end in the vblank hrtimer, not in the
worker. The worker might run much later, and then we generate a lot
of crc for which there's already a different worker queued up.
- frame number might be 0, so create a new crc_pending boolean to
track this without confusion.
- we need to atomically grab frame_start/end and clear it, so do that
all in one go. This is not going to create a new race, because if we
race with the hrtimer then our work will be re-run.
- only race that can happen is the following:
1. worker starts
2. hrtimer runs and updates frame_end
3. worker grabs frame_start/end, already reading the new frame_end,
and clears crc_pending
4. hrtimer calls queue_work()
5. worker completes
6. worker gets re-run, crc_pending is false
Explain this case a bit better by rewording the comment.
v2: Demote warning level output to debug when we fail to requeue, this
is expected under high load when the crc worker can't quite keep up.
Cc: Shayenne Moura <shayenneluzmoura@gmail.com>
Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Cc: Haneen Mohammed <hamohammed.sa@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Tested-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190606222751.32567-2-daniel.vetter@ffwll.ch
We gracefully handle the caller specifying a zero range, so don't force
them to special case that condition if it naturally falls out of their
setup. What we don't check is if the end < start, so keep that as an
assert for an illegal call.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190626094330.3556-1-chris@chris-wilson.co.uk
The authentication can be circumvented, by design, by using the render
node.
From the driver POV there is no distinction between primary and render
nodes, thus we can drop the token.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: virtualization@lists.linux-foundation.org
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190527081741.14235-12-emil.l.velikov@gmail.com
The authentication can be circumvented, by design, by using the render
node.
From the driver POV there is no distinction between primary and render
nodes, thus we can drop the token.
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190527081741.14235-11-emil.l.velikov@gmail.com
The authentication can be circumvented, by design, by using the render
node.
From the driver POV there is no distinction between primary and render
nodes, thus we can drop the token.
Note: the outstanding DRM_AUTH instance is:
- (badly coped) legacy DRI1 ioctl, which is a noop
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190527081741.14235-9-emil.l.velikov@gmail.com
The authentication can be circumvented, by design, by using the render
node.
From the driver POV there is no distinction between primary and render
nodes, thus we can drop the token.
Note: the outstanding DRM_AUTH instance is:
- legacy DRI1 ioctl, which is already neutered
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: nouveau@lists.freedesktop.org
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190527081741.14235-8-emil.l.velikov@gmail.com
The authentication can be circumvented, by design, by using the render
node.
From the driver POV there is no distinction between primary and render
nodes, thus we can drop the token.
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: freedreno@lists.freedesktop.org
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190527081741.14235-7-emil.l.velikov@gmail.com
The authentication can be circumvented, by design, by using the render
node.
From the driver POV there is no distinction between primary and render
nodes, thus we can drop the token.
Cc: Qiang Yu <yuq825@gmail.com>
Cc: lima@lists.freedesktop.org
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190527081741.14235-6-emil.l.velikov@gmail.com
The authentication can be circumvented, by design, by using the render
node.
From the driver POV there is no distinction between primary and render
nodes, thus we can drop the token.
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190527081741.14235-4-emil.l.velikov@gmail.com
The authentication can be circumvented, by design, by using the render
node.
From the driver POV there is no distinction between primary and render
nodes, thus we can drop the token.
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Cc: etnaviv@lists.freedesktop.org
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190527081741.14235-3-emil.l.velikov@gmail.com
Currently vmw_execbuf_ioctl() open-codes the permission checking, size
extending and copying that is already done in core drm.
Kill all the duplication, adding a few comments for clarity.
Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Tested-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190522164119.24139-3-emil.l.velikov@gmail.com
According to the docs - prevents firstopen/lastclose races. Yet never
used in practise.
Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190522164119.24139-2-emil.l.velikov@gmail.com
Core DRM is safe when the callback is NULL.
Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190522164119.24139-1-emil.l.velikov@gmail.com
Add support for display panels built around the Novatek NT39016 display
controller, as found on e.g. the King Display KD035G6-54NT 24-bit
320x240 3.5" LCD panel which equips the GCW Zero open-source handheld
gaming console.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Maarten ter Huurne <maarten@treewalker.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190603152555.23527-2-paul@crapouillou.net
Only user was the prime import, and drm_prime.c takes care of that
now.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Russell King <linux+etnaviv@armlinux.org.uk>
Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Cc: etnaviv@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20190614203615.12639-43-daniel.vetter@ffwll.ch
This is now done in drm_prime.c
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190614203615.12639-47-daniel.vetter@ffwll.ch
If we use the gem fb helper as the prepare_fb hook, plus the
drm_prime.c import helpers now automatically setting obj->resv, we can
use the shared helpers to wait for fences instead of rolling our own.
Note that this relies on mtk setting drm_fb->obj, which is already
done in mtk_drm_framebuffer_init().
Aside: Probably can use the default commit_tail with this again, but I
didn't check for that.
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: CK Hu <ck.hu@mediatek.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mediatek@lists.infradead.org
Link: https://patchwork.freedesktop.org/patch/msgid/20190614203615.12639-45-daniel.vetter@ffwll.ch
WARN if the incoming drm_display_mode has an illegal aspect ratio
when converting it to a user mode. This should never happen unless
the driver made a mistake and put an invalid value into the aspect
ratio.
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190620142639.17518-4-ville.syrjala@linux.intel.com
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
The commit 3aeeb13d89 ("drm/modes: Support modes names on the command
line") added name support to the DRM modes, and added that name to the
debug message.
However, that code tests for whether or not the name variable is NULL and
only prints it if it's not. Except that that variable is an array, so it
will never be NULL.
The original intent was to print it only when the name has been specified.
Just printing the array directly will achieve the same thing since the
drm_cmdline_mode structure that holds it is itself contained in
drm_connector, that is allocated with its whole content zero'd.
That means that if the name is not declared, the array will be all zeros,
which will not print anything.
Cc: Nick Desaulniers <ndesaulniers@google.com>
Reported-by: kbuild test robot <lkp@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Fixes: 3aeeb13d89 ("drm/modes: Support modes names on the command line")
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190624084016.12937-1-maxime.ripard@bootlin.com
The Synopsys MIPI DSI IP contains a video test pattern generator which
is helpful in debugging video timing with connected displays.
Add a debugfs directory containing files which allow the VPG to be
enabled and disabled, and its orientation to be changed.
Signed-off-by: Matt Redfearn <matt.redfearn@thinci.com>
Tested-by: Yannick Fertré <yannick.fertre@st.com>
Reviewed-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190430081646.23845-1-matt.redfearn@thinci.com
There is no point to print deferred probe messages as errors. Adjust
the printks for error paths of obtaining clocks and reset controller.
This removes the error message of lima_clk_init() call in favor or
specific failure messages inside.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190621162117.22533-4-krzk@kernel.org
There is no point to print deferred probe (and its failures to get
resources) as an error. For example getting a regulator causes three
unneeded error messages:
lima 13000000.gpu: failed to get regulator: -517
lima 13000000.gpu: regulator init fail -517
lima 13000000.gpu: Fatal error during GPU init
Also do not print clock rates before the initialization finishes
because they will be duplicated after deferral. Each probe step already
prints error so remove the final error message "Fatal error during GPU
init".
In case of multiple probe tries this would pollute the dmesg.
Fixes: a1d2a63399 ("drm/lima: driver for ARM Mali4xx GPUs")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190621162117.22533-2-krzk@kernel.org
Mark long numbers with ULL to silence the Smatch warning:
drivers/gpu/drm/lima/lima_device.c:314:32: warning: constant 0x100000000 is so big it is long long
Fixes: a1d2a63399 ("drm/lima: driver for ARM Mali4xx GPUs")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190621162117.22533-1-krzk@kernel.org
It looks like this was done purely to get a consistent place to look
up the reservation object pointer. With the drm_prime.c helper code
now also setting gem_object->resv for imported objects we can just use
that pointer directly, instead of first ensuring a dma-buf exists.
v2: Note that I screwed up the patch ordering, hence why this needed
a Fixes: tag - CI spotted the broken intermediate state.
Fixes: 5eab998741 ("drm/vgem: Drop drm_gem_prime_export")
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190614203615.12639-49-daniel.vetter@ffwll.ch
