Commit Graph

63313 Commits

Author SHA1 Message Date
Benjamin Tissoires
e534a93522 HID: sony: do not rely on hid_output_raw_report
hid_out_raw_report is going to be obsoleted as it is not part of the
unified HID low level transport documentation
(Documentation/hid/hid-transport.txt)

To do so, we need to introduce two new quirks:
* HID_QUIRK_NO_OUTPUT_REPORTS_ON_INTR_EP: this quirks prevents the
  transport driver to use the interrupt channel to send output report
  (and thus force to use HID_REQ_SET_REPORT command)
* HID_QUIRK_SKIP_OUTPUT_REPORT_ID: this one forces usbhid to not
  include the report ID in the buffer it sends to the device through
  HID_REQ_SET_REPORT in case of an output report

This also fixes a regression introduced in commit 3a75b24949
(HID: hidraw: replace hid_output_raw_report() calls by appropriates ones).
The hidraw API was not able to communicate with the PS3 SixAxis
controllers in USB mode.

Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Tested-by: Antonio Ospite <ao2@ao2.it>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-03-14 15:30:20 +01:00
Benjamin Tissoires
3c86726cfe HID: make .raw_request mandatory
SET_REPORT and GET_REPORT are mandatory in the HID specification.
Make the corresponding API in hid-core mandatory too, which removes the
need to test against it in some various places.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-02-24 17:23:15 +01:00
Benjamin Tissoires
5318251744 HID: core: check parameters when sending/receiving data from the device
It is better to check them soon enough before triggering any kernel panic.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-02-17 14:58:59 +01:00
Benjamin Tissoires
4fa5a7f76c HID: core: implement generic .request()
.request() can be emulated through .raw_request()
we can implement this emulation in hid-core, and make .request
not mandatory for transport layer drivers.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-02-17 14:52:51 +01:00
Benjamin Tissoires
7e845d46b1 HID: introduce helper to access hid_output_raw_report()
Add a helper to access hdev->hid_output_raw_report().

To convert the drivers, use the following snippets:

for i in drivers/hid/*.c
do
  sed -i.bak "s/[^ \t]*->hid_output_raw_report(/hid_output_raw_report(/g" $i
done

Then manually fix for checkpatch.pl

Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-02-17 14:05:59 +01:00
Benjamin Tissoires
cafebc058b HID: remove hid_get_raw_report in struct hid_device
dev->hid_get_raw_report(X) and hid_hw_raw_request(X, HID_REQ_GET_REPORT)
are strictly equivalent. Switch the hid subsystem to the hid_hw notation
and remove the field .hid_get_raw_report in struct hid_device.

Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-02-17 14:05:58 +01:00
Benjamin Tissoires
b40272e4d0 HID: remove hidinput_input_event handler
All the different transport drivers use now the generic event handling
in hid-input. We can remove the handler definitively now.

Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-02-17 14:05:56 +01:00
Benjamin Tissoires
b69d653679 HID: add inliners for ll_driver transport-layer callbacks
Those callbacks are not mandatory, so it's better to add inliners
to use them safely.

Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-02-17 14:05:55 +01:00
Frank Praznik
cd4dc0821b HID: Add transport-driver callbacks to the hid_ll_driver struct
Add raw_request and output_report callbacks to the hid_ll_driver struct.

Signed-off-by: Frank Praznik <frank.praznik@oh.rr.com>
Acked-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-01-29 14:23:41 +01:00
Linus Torvalds
fe41c2c018 A set of device-mapper changes for 3.14.
A lot of attention was paid to improving the thin-provisioning target's
 handling of metadata operation failures and running out of space.  A new
 'error_if_no_space' feature was added to allow users to error IOs rather
 than queue them when either the data or metadata space is exhausted.
 
 Additional fixes/features include:
 - a few fixes to properly support thin metadata device resizing
 - a solution for reliably waiting for a DM device's embedded kobject to
   be released before destroying the device
 - old dm-snapshot is updated to use the dm-bufio interface to take
   advantage of readahead capabilities that improve snapshot activation
 - new dm-cache target tunables to control how quickly data is promoted
   to the cache (fast) device
 - improved write efficiency of cluster mirror target by combining
   userspace flush and mark requests
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJS4GClAAoJEMUj8QotnQNacdEH/2ES5k5itUQRY9jeI+u2zYNP
 vdsRTYf+97+B3jpRvpWbMt4kxT2tjaQbkxJ+iKRHy2MBLFUgq8ruH1RS/Q5VbDeg
 6i6ol8mpNxhlvo/KTMxXqRcWDSxShiMfhz2lXC2bJ7M4sP/iiH85s4Pm4YQ59jpd
 OIX7qj36m/cV/le9YQbexJEEsaj+3genbzL26wyyvtG/rT9fWnXa7clj2gqTdToG
 YCEBCRf5FH9X6W/Oc50nMw5n2dt/MRmPre/MAlOjemeaosB0WJiKaswM25rnvHp0
 JnhxQ2K2C5KIKAWIfwPOImdb9zWW7p1dIRLsS8nHBUQr0BF5VRkmvpnYH4qBtcc=
 =e7e0
 -----END PGP SIGNATURE-----

Merge tag 'dm-3.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device-mapper changes from Mike Snitzer:
 "A lot of attention was paid to improving the thin-provisioning
  target's handling of metadata operation failures and running out of
  space.  A new 'error_if_no_space' feature was added to allow users to
  error IOs rather than queue them when either the data or metadata
  space is exhausted.

  Additional fixes/features include:
   - a few fixes to properly support thin metadata device resizing
   - a solution for reliably waiting for a DM device's embedded kobject
     to be released before destroying the device
   - old dm-snapshot is updated to use the dm-bufio interface to take
     advantage of readahead capabilities that improve snapshot
     activation
   - new dm-cache target tunables to control how quickly data is
     promoted to the cache (fast) device
   - improved write efficiency of cluster mirror target by combining
     userspace flush and mark requests"

* tag 'dm-3.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (35 commits)
  dm log userspace: allow mark requests to piggyback on flush requests
  dm space map metadata: fix bug in resizing of thin metadata
  dm cache: add policy name to status output
  dm thin: fix pool feature parsing
  dm sysfs: fix a module unload race
  dm snapshot: use dm-bufio prefetch
  dm snapshot: use dm-bufio
  dm snapshot: prepare for switch to using dm-bufio
  dm snapshot: use GFP_KERNEL when initializing exceptions
  dm cache: add block sizes and total cache blocks to status output
  dm btree: add dm_btree_find_lowest_key
  dm space map metadata: fix extending the space map
  dm space map common: make sure new space is used during extend
  dm: wait until embedded kobject is released before destroying a device
  dm: remove pointless kobject comparison in dm_get_from_kobject
  dm snapshot: call destroy_work_on_stack() to pair with INIT_WORK_ONSTACK()
  dm cache policy mq: introduce three promotion threshold tunables
  dm cache policy mq: use list_del_init instead of list_del + INIT_LIST_HEAD
  dm thin: fix set_pool_mode exposed pool operation races
  dm thin: eliminate the no_free_space flag
  ...
2014-01-22 20:17:48 -08:00
Linus Torvalds
194e57fd18 SCSI for-linus on 20140122
This patch set is a lot of driver updates for qla4xxx, bfa, hpsa, qla2xxx.  It
 also removes the aic7xxx_old driver (which has been deprecated for nearly a
 decade) and adds support for deadlines in error handling.
 
 Signed-off-by: James Bottomley <JBottomley@Parallels.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQEcBAABAgAGBQJS4AfxAAoJEDeqqVYsXL0M8DAIAKRtc9+hy2zsratyvHxxZlz4
 6tdvT/4dLTXbIS7EFHmdVb09G5791Pj2jx2PAza/zFDSzgMyL8reXjXpDtCQBvsG
 U9CKAGAfJi/vD3QSez2qh0SyvIfCHjatlU3IsM/g+5iFcIOO9+LMJuRlw3qtVqOZ
 iQQBATH8cuVW7k1YRHXS5xAO8cVCEYBPuuz0UreVnZijTV5lsRFaObaq8r7S7yVM
 4F5eSb5lcgZZLDMDMB0E2KHq12QoLiLQy/ahCqAL1od41v+P90BHC4cIu8jkdB0l
 nUYp8vHkmsM82L3xxK9HglcZvJ94fkz6n1gwULl2dTNSYldUnXc/xmocbt0KMf8=
 =yko3
 -----END PGP SIGNATURE-----

Merge tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This patch set is a lot of driver updates for qla4xxx, bfa, hpsa,
  qla2xxx.  It also removes the aic7xxx_old driver (which has been
  deprecated for nearly a decade) and adds support for deadlines in
  error handling"

* tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (75 commits)
  [SCSI] hpsa: allow SCSI mid layer to handle unit attention
  [SCSI] hpsa: do not require board "not ready" status after hard reset
  [SCSI] hpsa: enable unit attention reporting
  [SCSI] hpsa: rename scsi prefetch field
  [SCSI] hpsa: use workqueue instead of kernel thread for lockup detection
  [SCSI] ipr: increase dump size in ipr driver
  [SCSI] mac_scsi: Fix crash on out of memory
  [SCSI] st: fix enlarge_buffer
  [SCSI] qla1280: Annotate timer on stack so object debug does not complain
  [SCSI] qla4xxx: Update driver version to 5.04.00-k3
  [SCSI] qla4xxx: Recreate chap data list during get chap operation
  [SCSI] qla4xxx: Add support for ISCSI_PARAM_LOCAL_IPADDR sysfs attr
  [SCSI] libiscsi: Add local_ipaddr parameter in iscsi_conn struct
  [SCSI] scsi_transport_iscsi: Export ISCSI_PARAM_LOCAL_IPADDR attr for iscsi_connection
  [SCSI] qla4xxx: Add host statistics support
  [SCSI] scsi_transport_iscsi: Add host statistics support
  [SCSI] qla4xxx: Added support for Diagnostics MBOX command
  [SCSI] bfa: Driver version upgrade to 3.2.23.0
  [SCSI] bfa: change FC_ELS_TOV to 20sec
  [SCSI] bfa: Observed auto D-port mode instead of manual
  ...
2014-01-22 17:32:26 -08:00
Linus Torvalds
e1ba84597c PCI changes for the v3.14 merge window:
Resource management
     - Change pci_bus_region addresses to dma_addr_t (Bjorn Helgaas)
     - Support 64-bit AGP BARs (Bjorn Helgaas, Yinghai Lu)
     - Add pci_bus_address() to get bus address of a BAR (Bjorn Helgaas)
     - Use pci_resource_start() for CPU address of AGP BARs (Bjorn Helgaas)
     - Enforce bus address limits in resource allocation (Yinghai Lu)
     - Allocate 64-bit BARs above 4G when possible (Yinghai Lu)
     - Convert pcibios_resource_to_bus() to take pci_bus, not pci_dev (Yinghai Lu)
 
   PCI device hotplug
     - Major rescan/remove locking update (Rafael J. Wysocki)
     - Make ioapic builtin only (not modular) (Yinghai Lu)
     - Fix release/free issues (Yinghai Lu)
     - Clean up pciehp (Bjorn Helgaas)
     - Announce pciehp slot info during enumeration (Bjorn Helgaas)
 
   MSI
     - Add pci_msi_vec_count(), pci_msix_vec_count() (Alexander Gordeev)
     - Add pci_enable_msi_range(), pci_enable_msix_range() (Alexander Gordeev)
     - Deprecate "tri-state" interfaces: fail/success/fail+info (Alexander Gordeev)
     - Export MSI mode using attributes, not kobjects (Greg Kroah-Hartman)
     - Drop "irq" param from *_restore_msi_irqs() (DuanZhenzhong)
 
   SR-IOV
     - Clear NumVFs when disabling SR-IOV in sriov_init() (ethan.zhao)
 
   Virtualization
     - Add support for save/restore of extended capabilities (Alex Williamson)
     - Add Virtual Channel to save/restore support (Alex Williamson)
     - Never treat a VF as a multifunction device (Alex Williamson)
     - Add pci_try_reset_function(), et al (Alex Williamson)
 
   AER
     - Ignore non-PCIe error sources (Betty Dall)
     - Support ACPI HEST error sources for domains other than 0 (Betty Dall)
     - Consolidate HEST error source parsers (Bjorn Helgaas)
     - Add a TLP header print helper (Borislav Petkov)
 
   Freescale i.MX6
     - Remove unnecessary code (Fabio Estevam)
     - Make reset-gpio optional (Marek Vasut)
     - Report "link up" only after link training completes (Marek Vasut)
     - Start link in Gen1 before negotiating for Gen2 mode (Marek Vasut)
     - Fix PCIe startup code (Richard Zhu)
 
   Marvell MVEBU
     - Remove duplicate of_clk_get_by_name() call (Andrew Lunn)
     - Drop writes to bridge Secondary Status register (Jason Gunthorpe)
     - Obey bridge PCI_COMMAND_MEM and PCI_COMMAND_IO bits (Jason Gunthorpe)
     - Support a bridge with no IO port window (Jason Gunthorpe)
     - Use max_t() instead of max(resource_size_t,) (Jingoo Han)
     - Remove redundant of_match_ptr (Sachin Kamat)
     - Call pci_ioremap_io() at startup instead of dynamically (Thomas Petazzoni)
 
   NVIDIA Tegra
     - Disable Gen2 for Tegra20 and Tegra30 (Eric Brower)
 
   Renesas R-Car
     - Add runtime PM support (Valentine Barshak)
     - Fix rcar_pci_probe() return value check (Wei Yongjun)
 
   Synopsys DesignWare
     - Fix crash in dw_msi_teardown_irq() (Bjørn Erik Nilsen)
     - Remove redundant call to pci_write_config_word() (Bjørn Erik Nilsen)
     - Fix missing MSI IRQs (Harro Haan)
     - Add dw_pcie prefix before cfg_read/write (Pratyush Anand)
     - Fix I/O transfers by using CPU (not realio) address (Pratyush Anand)
     - Whitespace cleanup (Jingoo Han)
 
   EISA
     - Call put_device() if device_register() fails (Levente Kurusa)
     - Revert EISA initialization breakage ((Bjorn Helgaas)
 
   Miscellaneous
     - Remove unused code, including PCIe 3.0 interfaces (Stephen Hemminger)
     - Prevent bus conflicts while checking for bridge apertures (Bjorn Helgaas)
     - Stop clearing bridge Secondary Status when setting up I/O aperture (Bjorn Helgaas)
     - Use dev_is_pci() to identify PCI devices (Yijing Wang)
     - Deprecate DEFINE_PCI_DEVICE_TABLE (Joe Perches)
     - Update documentation 00-INDEX (Erik Ekman)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJS3ujEAAoJEFmIoMA60/r8A4EQAK9AZSUSVNWvlKdC1PrBfT3w
 7fVILx5A4KWsOU8eoFwCPQLrgvUtMltg16yN2tbCjqpKEdrVc36biMO9bwhnXSyZ
 KopHKMWnn0sza/z2H8mcGy+0azGdWcIjcErX/a8WeS6zyWBjm+yzckrHNVpPu4Ca
 SpCBhfgBMjKyIZyLtP6juFSH34S2DfQex4oUSyPC+gjqPy5wW/xw/kBxZfOXl+yU
 P9pQT+geMIc31pETMdG9wd/TT+47YAui4ieSggoVxfVrphCXv6S8mOMCMuQc2bAy
 MHy9uFm1jbvKZZIYrzJ+9HFiiU/6MNiOO3Ygua52xuSp1Zrcjwi2CLD9/QBXbDVs
 pTKU5JIO7q43llkQUpIXTwBvEApSZRhuqzXegsMAYIg4AWmbfm/2fXkfWlQThYMp
 J48blAJZ4t0vhMr9usgwbtdBe8F5euExOxpwH0QMCMABbuu8/B3TLm39+LTcIbsw
 Efgm3N9iUTyiV5fe9Rr62nflhyqXjTevPl4wbZZe4OOdm0MXZY+/BzuNJhg3wyY8
 QKz2J3FB6OR7BCLHCp80l50s5+Ih4F5kmOXwFKjT1D1MFRaNaPDmp9BY6TitU6hg
 zj55gP4c8x6n3alakbf972Yhgs/4oi1va8cZL+pCYWb8nPO5ldaMiT7QBBLUreQV
 BtDtC7u/AFWJ5e73+jVO
 =La1R
 -----END PGP SIGNATURE-----

Merge tag 'pci-v3.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:
 "PCI changes for the v3.14 merge window:

  Resource management
    - Change pci_bus_region addresses to dma_addr_t (Bjorn Helgaas)
    - Support 64-bit AGP BARs (Bjorn Helgaas, Yinghai Lu)
    - Add pci_bus_address() to get bus address of a BAR (Bjorn Helgaas)
    - Use pci_resource_start() for CPU address of AGP BARs (Bjorn Helgaas)
    - Enforce bus address limits in resource allocation (Yinghai Lu)
    - Allocate 64-bit BARs above 4G when possible (Yinghai Lu)
    - Convert pcibios_resource_to_bus() to take pci_bus, not pci_dev (Yinghai Lu)

  PCI device hotplug
    - Major rescan/remove locking update (Rafael J. Wysocki)
    - Make ioapic builtin only (not modular) (Yinghai Lu)
    - Fix release/free issues (Yinghai Lu)
    - Clean up pciehp (Bjorn Helgaas)
    - Announce pciehp slot info during enumeration (Bjorn Helgaas)

  MSI
    - Add pci_msi_vec_count(), pci_msix_vec_count() (Alexander Gordeev)
    - Add pci_enable_msi_range(), pci_enable_msix_range() (Alexander Gordeev)
    - Deprecate "tri-state" interfaces: fail/success/fail+info (Alexander Gordeev)
    - Export MSI mode using attributes, not kobjects (Greg Kroah-Hartman)
    - Drop "irq" param from *_restore_msi_irqs() (DuanZhenzhong)

  SR-IOV
    - Clear NumVFs when disabling SR-IOV in sriov_init() (ethan.zhao)

  Virtualization
    - Add support for save/restore of extended capabilities (Alex Williamson)
    - Add Virtual Channel to save/restore support (Alex Williamson)
    - Never treat a VF as a multifunction device (Alex Williamson)
    - Add pci_try_reset_function(), et al (Alex Williamson)

  AER
    - Ignore non-PCIe error sources (Betty Dall)
    - Support ACPI HEST error sources for domains other than 0 (Betty Dall)
    - Consolidate HEST error source parsers (Bjorn Helgaas)
    - Add a TLP header print helper (Borislav Petkov)

  Freescale i.MX6
    - Remove unnecessary code (Fabio Estevam)
    - Make reset-gpio optional (Marek Vasut)
    - Report "link up" only after link training completes (Marek Vasut)
    - Start link in Gen1 before negotiating for Gen2 mode (Marek Vasut)
    - Fix PCIe startup code (Richard Zhu)

  Marvell MVEBU
    - Remove duplicate of_clk_get_by_name() call (Andrew Lunn)
    - Drop writes to bridge Secondary Status register (Jason Gunthorpe)
    - Obey bridge PCI_COMMAND_MEM and PCI_COMMAND_IO bits (Jason Gunthorpe)
    - Support a bridge with no IO port window (Jason Gunthorpe)
    - Use max_t() instead of max(resource_size_t,) (Jingoo Han)
    - Remove redundant of_match_ptr (Sachin Kamat)
    - Call pci_ioremap_io() at startup instead of dynamically (Thomas Petazzoni)

  NVIDIA Tegra
    - Disable Gen2 for Tegra20 and Tegra30 (Eric Brower)

  Renesas R-Car
    - Add runtime PM support (Valentine Barshak)
    - Fix rcar_pci_probe() return value check (Wei Yongjun)

  Synopsys DesignWare
    - Fix crash in dw_msi_teardown_irq() (Bjørn Erik Nilsen)
    - Remove redundant call to pci_write_config_word() (Bjørn Erik Nilsen)
    - Fix missing MSI IRQs (Harro Haan)
    - Add dw_pcie prefix before cfg_read/write (Pratyush Anand)
    - Fix I/O transfers by using CPU (not realio) address (Pratyush Anand)
    - Whitespace cleanup (Jingoo Han)

  EISA
    - Call put_device() if device_register() fails (Levente Kurusa)
    - Revert EISA initialization breakage ((Bjorn Helgaas)

  Miscellaneous
    - Remove unused code, including PCIe 3.0 interfaces (Stephen Hemminger)
    - Prevent bus conflicts while checking for bridge apertures (Bjorn Helgaas)
    - Stop clearing bridge Secondary Status when setting up I/O aperture (Bjorn Helgaas)
    - Use dev_is_pci() to identify PCI devices (Yijing Wang)
    - Deprecate DEFINE_PCI_DEVICE_TABLE (Joe Perches)
    - Update documentation 00-INDEX (Erik Ekman)"

* tag 'pci-v3.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (119 commits)
  Revert "EISA: Initialize device before its resources"
  Revert "EISA: Log device resources in dmesg"
  vfio-pci: Use pci "try" reset interface
  PCI: Check parent kobject in pci_destroy_dev()
  xen/pcifront: Use global PCI rescan-remove locking
  powerpc/eeh: Use global PCI rescan-remove locking
  PCI: Fix pci_check_and_unmask_intx() comment typos
  PCI: Add pci_try_reset_function(), pci_try_reset_slot(), pci_try_reset_bus()
  MPT / PCI: Use pci_stop_and_remove_bus_device_locked()
  platform / x86: Use global PCI rescan-remove locking
  PCI: hotplug: Use global PCI rescan-remove locking
  pcmcia: Use global PCI rescan-remove locking
  ACPI / hotplug / PCI: Use global PCI rescan-remove locking
  ACPI / PCI: Use global PCI rescan-remove locking in PCI root hotplug
  PCI: Add global pci_lock_rescan_remove()
  PCI: Cleanup pci.h whitespace
  PCI: Reorder so actual code comes before stubs
  PCI/AER: Support ACPI HEST AER error sources for PCI domains other than 0
  ACPICA: Add helper macros to extract bus/segment numbers from HEST table.
  PCI: Make local functions static
  ...
2014-01-22 16:39:28 -08:00
Linus Torvalds
60eaa0190f This pull request has a new feature to ftrace, namely the trace event
triggers by Tom Zanussi. A trigger is a way to enable an action when an
 event is hit. The actions are:
 
  o  trace on/off - enable or disable tracing
  o  snapshot     - save the current trace buffer in the snapshot
  o  stacktrace   - dump the current stack trace to the ringbuffer
  o  enable/disable events - enable or disable another event
 
 Namhyung Kim added updates to the tracing uprobes code. Having the
 uprobes add support for fetch methods.
 
 The rest are various bug fixes with the new code, and minor ones for
 the old code.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.15 (GNU/Linux)
 
 iQEcBAABAgAGBQJS3Z9fAAoJEKQekfcNnQGuFf0H/0CteaN+BJjpif6Tnxia15Sp
 pcftzU0lgqfNzsfitmbjiVTgXWqCghoZo8UI9tQZvBZ9wmDIxeXQR73uoBgVlSCQ
 ovyBO/R8r+lq+7EsDCwntZvrLbcdn6s/jzoruRvt7r35ghK5pH81DNR1BOzTQBhW
 x+361Xtc13aok7N7JN8KR96VDUP9f8KU6PWqJ5lgS2Zl+wbVw6b0p8OV8IMCHczP
 MdYrx8y4Jv4QWW7rMShAAVBe9qJQ56JWiWA17ysa4kY8BkKQ7QtlEFr+r1YY0nX5
 67brXiL8u0NFzRx5y2VRpGc25BbImnVBFpoLQ5Itluq9OdZE3aOQubzXlY70R6g=
 =Hkho
 -----END PGP SIGNATURE-----

Merge tag 'trace-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing updates from Steven Rostedt:
 "This pull request has a new feature to ftrace, namely the trace event
  triggers by Tom Zanussi.  A trigger is a way to enable an action when
  an event is hit.  The actions are:

   o  trace on/off - enable or disable tracing
   o  snapshot     - save the current trace buffer in the snapshot
   o  stacktrace   - dump the current stack trace to the ringbuffer
   o  enable/disable events - enable or disable another event

  Namhyung Kim added updates to the tracing uprobes code.  Having the
  uprobes add support for fetch methods.

  The rest are various bug fixes with the new code, and minor ones for
  the old code"

* tag 'trace-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (38 commits)
  tracing: Fix buggered tee(2) on tracing_pipe
  tracing: Have trace buffer point back to trace_array
  ftrace: Fix synchronization location disabling and freeing ftrace_ops
  ftrace: Have function graph only trace based on global_ops filters
  ftrace: Synchronize setting function_trace_op with ftrace_trace_function
  tracing: Show available event triggers when no trigger is set
  tracing: Consolidate event trigger code
  tracing: Fix counter for traceon/off event triggers
  tracing: Remove double-underscore naming in syscall trigger invocations
  tracing/kprobes: Add trace event trigger invocations
  tracing/probes: Fix build break on !CONFIG_KPROBE_EVENT
  tracing/uprobes: Add @+file_offset fetch method
  uprobes: Allocate ->utask before handler_chain() for tracing handlers
  tracing/uprobes: Add support for full argument access methods
  tracing/uprobes: Fetch args before reserving a ring buffer
  tracing/uprobes: Pass 'is_return' to traceprobe_parse_probe_arg()
  tracing/probes: Implement 'memory' fetch method for uprobes
  tracing/probes: Add fetch{,_size} member into deref fetch method
  tracing/probes: Move 'symbol' fetch method to kprobes
  tracing/probes: Implement 'stack' fetch method for uprobes
  ...
2014-01-22 16:35:21 -08:00
Dongmao Zhang
5066a4df1f dm log userspace: allow mark requests to piggyback on flush requests
In the cluster evironment, cluster write has poor performance because
userspace_flush() has to contact a userspace program (cmirrord) for
clear/mark/flush requests.  But both mark and flush requests require
cmirrord to communicate the message to all the cluster nodes for each
flush call.  This behaviour is really slow.

To address this we now merge mark and flush requests together to reduce
the kernel-userspace-kernel time.  We allow a new directive,
"integrated_flush" that can be used to instruct the kernel log code to
combine flush and mark requests when directed by userspace.  If not
directed by userspace (due to an older version of the userspace code
perhaps), the kernel will function as it did previously - preserving
backwards compatibility.  Additionally, flush requests are performed
lazily when only clear requests exist.

Signed-off-by: Dongmao Zhang <dmzhang@suse.com>
Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2014-01-21 23:46:27 -05:00
Linus Torvalds
df32e43a54 Merge branch 'akpm' (incoming from Andrew)
Merge first patch-bomb from Andrew Morton:

 - a couple of misc things

 - inotify/fsnotify work from Jan

 - ocfs2 updates (partial)

 - about half of MM

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (117 commits)
  mm/migrate: remove unused function, fail_migrate_page()
  mm/migrate: remove putback_lru_pages, fix comment on putback_movable_pages
  mm/migrate: correct failure handling if !hugepage_migration_support()
  mm/migrate: add comment about permanent failure path
  mm, page_alloc: warn for non-blockable __GFP_NOFAIL allocation failure
  mm: compaction: reset scanner positions immediately when they meet
  mm: compaction: do not mark unmovable pageblocks as skipped in async compaction
  mm: compaction: detect when scanners meet in isolate_freepages
  mm: compaction: reset cached scanner pfn's before reading them
  mm: compaction: encapsulate defer reset logic
  mm: compaction: trace compaction begin and end
  memcg, oom: lock mem_cgroup_print_oom_info
  sched: add tracepoints related to NUMA task migration
  mm: numa: do not automatically migrate KSM pages
  mm: numa: trace tasks that fail migration due to rate limiting
  mm: numa: limit scope of lock for NUMA migrate rate limiting
  mm: numa: make NUMA-migrate related functions static
  lib/show_mem.c: show num_poisoned_pages when oom
  mm/hwpoison: add '#' to hwpoison_inject
  mm/memblock: use WARN_ONCE when MAX_NUMNODES passed as input parameter
  ...
2014-01-21 19:05:45 -08:00
Linus Torvalds
fbd918a202 Merge branch 'for-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
Pull libata updates from Tejun Heo:
 "Support for some new embedded controllers.

  A couple late (<= a week) fixes have stable cc'd and one patch ("SATA:
  MV: Add support for the optional PHYs") got committed yesterday
  because otherwise the resulting kernel would fail boot on an embedded
  board due to interdependent changes in its platform tree.

  Other than that, nothing too noteworthy"

* 'for-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  SATA: MV: Add support for the optional PHYs
  sata-highbank: Remove unnecessary ahci_platform.h include
  libata: disable LPM for some WD SATA-I devices
  ARM: mvebu: update the SATA compatible string for Armada 370/XP
  ata: sata_mv: fix disk hotplug for Armada 370/XP SoCs
  ata: sata_mv: introduce compatible string "marvell, armada-370-sata"
  ata: pata_samsung_cf: Remove unused macros
  ata: pata_samsung_cf: Use devm_ioremap_resource()
  ata: pata_samsung_cf: Merge pata_samsung_cf.h into pata_samsung_cf.c
  ata: pata_samsung_cf: Move plat/regs-ata.h to drivers/ata
  drivers: ata: Mark the function as static in libahci.c
  drivers: ata: Mark the function ahci_init_interrupts() as static in ahci.c
  ahci: imx: fix the error handling in imx_ahci_probe()
  ahci: imx: ahci_imx_softreset() can be static
  ahci: imx: Add i.MX53 support
  ahci: imx: Pull out the clock enable/disable calls
  libata, dt: Document sata_rcar bindings
  sata_rcar: Add R-Car Gen2 SATA PHY support
  ahci: mcp89: enter AHCI mode under Apple BIOS emulation
  ata: libata-eh: Remove unnecessary snprintf arithmetic
2014-01-21 18:16:08 -08:00
Linus Torvalds
f075e0f699 Merge branch 'for-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
 "The bulk of changes are cleanups and preparations for the upcoming
  kernfs conversion.

   - cgroup_event mechanism which is and will be used only by memcg is
     moved to memcg.

   - pidlist handling is updated so that it can be served by seq_file.

     Also, the list is not sorted if sane_behavior.  cgroup
     documentation explicitly states that the file is not sorted but it
     has been for quite some time.

   - All cgroup file handling now happens on top of seq_file.  This is
     to prepare for kernfs conversion.  In addition, all operations are
     restructured so that they map 1-1 to kernfs operations.

   - Other cleanups and low-pri fixes"

* 'for-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (40 commits)
  cgroup: trivial style updates
  cgroup: remove stray references to css_id
  doc: cgroups: Fix typo in doc/cgroups
  cgroup: fix fail path in cgroup_load_subsys()
  cgroup: fix missing unlock on error in cgroup_load_subsys()
  cgroup: remove for_each_root_subsys()
  cgroup: implement for_each_css()
  cgroup: factor out cgroup_subsys_state creation into create_css()
  cgroup: combine css handling loops in cgroup_create()
  cgroup: reorder operations in cgroup_create()
  cgroup: make for_each_subsys() useable under cgroup_root_mutex
  cgroup: css iterations and css_from_dir() are safe under cgroup_mutex
  cgroup: unify pidlist and other file handling
  cgroup: replace cftype->read_seq_string() with cftype->seq_show()
  cgroup: attach cgroup_open_file to all cgroup files
  cgroup: generalize cgroup_pidlist_open_file
  cgroup: unify read path so that seq_file is always used
  cgroup: unify cgroup_write_X64() and cgroup_write_string()
  cgroup: remove cftype->read(), ->read_map() and ->write()
  hugetlb_cgroup: convert away from cftype->read()
  ...
2014-01-21 17:51:34 -08:00
Linus Torvalds
2182c815f3 The main topics this time are allocation, in the form of Bob's
improvements when searching resource groups and several updates
 to quotas which should increase scalability. The quota changes
 follow on from those in the last merge window, and there will
 likely be further work to come in this area in due course.
 
 There are also a few patches which help to improve efficiency
 of adding entries into directories, and clean up some of that
 code.
 
 One on-disk change is included this time, which is to write some
 additional information which should be useful to fsck and
 also potentially for debugging.
 
 Other than that, its just a few small random bug fixes and
 clean ups.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.15 (GNU/Linux)
 
 iQIcBAABAgAGBQJS3RZUAAoJEMrg3m4a/8jS/C4QAKAoGbGH8UxG2fNRUWK94UBL
 lxxn0nUaQ7bwKpIbysEO6HHg2rqcfjRSdO/H6kfD51Fgg39RfIfvXF9woJw/5Is6
 1xcn3faBl3dQhIq81+lSKnEJnJbQ49dbIcgxt1FGqPI8ZY6st/CBvnvqh0TRAcvN
 7t0TYSPxmA/7BnwynstTbpK2l9uUisau8z12QzihJ6lRiR7QlfFSUq6Xs/ICSmkE
 LE2dC6gXMIIDyMpPX5Fg9NQNEAPKOzMwduUaHnv2vpuh1jkk3ObHg4mUkYtdoUZx
 Hbs1Ey5oqRiMs03I5wm1ayZg+6i/pT7HTM5vbrunTa21AMmJ0NTFdZ4ihVZqZwu4
 ynpXY0OT/U7CpFyx6FSKtlq0kzwx5A51mL9bpSlLU9pggJY6NHQdmSJ9fdLW9cdS
 Wwi2Br/0rBvIhm0ejy8kxK904DhqCGsH+RXbfOc8J4VBE4R/z5eMmBG9UqMm7c+7
 hO6FhpJo9QsNMe19A8IANzG2gT+PcpgrXs2GTS1QFGhFgn08+k3RLDT/SrGRxU6r
 MaCM9rms0SgMr2LX6MEPZdo3LJgBTNr1rKDEIzQ7BUXs3FHJ7U0swuHOTDXFVm51
 gQanPYmVvFV7aiom3ExUhegDefBu1jMnY26SVxxLAbWN1Ek2Ikg6rO6wx3ckXvYo
 SKY3qAewE5pNpHe7u6SS
 =/tv0
 -----END PGP SIGNATURE-----

Merge tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw

Pull GFS2 updates from Steven Whitehouse:
 "The main topics this time are allocation, in the form of Bob's
  improvements when searching resource groups and several updates to
  quotas which should increase scalability.  The quota changes follow on
  from those in the last merge window, and there will likely be further
  work to come in this area in due course.

  There are also a few patches which help to improve efficiency of
  adding entries into directories, and clean up some of that code.

  One on-disk change is included this time, which is to write some
  additional information which should be useful to fsck and also
  potentially for debugging.

  Other than that, its just a few small random bug fixes and clean ups"

* tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw: (24 commits)
  GFS2: revert "GFS2: d_splice_alias() can't return error"
  GFS2: Small cleanup
  GFS2: Don't use ENOBUFS when ENOMEM is the correct error code
  GFS2: Fix kbuild test robot reported warning
  GFS2: Move quota bitmap operations under their own lock
  GFS2: Clean up quota slot allocation
  GFS2: Only run logd and quota when mounted read/write
  GFS2: Use RCU/hlist_bl based hash for quotas
  GFS2: No need to invalidate pages for a dio read
  GFS2: Add initialization for address space in super block
  GFS2: Add hints to directory leaf blocks
  GFS2: For exhash conversion, only one block is needed
  GFS2: Increase i_writecount during gfs2_setattr_chown
  GFS2: Remember directory insert point
  GFS2: Consolidate transaction blocks calculation for dir add
  GFS2: Add directory addition info structure
  GFS2: Use only a single address space for rgrps
  GFS2: Use range based functions for rgrp sync/invalidation
  GFS2: Remove test which is always true
  GFS2: Remove gfs2_quota_change_host structure
  ...
2014-01-21 17:42:00 -08:00
Joonsoo Kim
78d5506e82 mm/migrate: remove unused function, fail_migrate_page()
fail_migrate_page() isn't used anywhere, so remove it.

Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Christoph Lameter <cl@linux.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reviewed-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 16:19:49 -08:00
Joonsoo Kim
59c82b70dc mm/migrate: remove putback_lru_pages, fix comment on putback_movable_pages
Some part of putback_lru_pages() and putback_movable_pages() is
duplicated, so it could confuse us what we should use.  We can remove
putback_lru_pages() since it is not really needed now.  This makes us
undestand and maintain the code more easily.

And comment on putback_movable_pages() is stale now, so fix it.

Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Reviewed-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 16:19:49 -08:00
Vlastimil Babka
de6c60a6c1 mm: compaction: encapsulate defer reset logic
Currently there are several functions to manipulate the deferred
compaction state variables.  The remaining case where the variables are
touched directly is when a successful allocation occurs in direct
compaction, or is expected to be successful in the future by kswapd.
Here, the lowest order that is expected to fail is updated, and in the
case of successful allocation, the deferred status and counter is reset
completely.

Create a new function compaction_defer_reset() to encapsulate this
functionality and make it easier to understand the code.  No functional
change.

Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 16:19:48 -08:00
Mel Gorman
0eb927c0ab mm: compaction: trace compaction begin and end
The broad goal of the series is to improve allocation success rates for
huge pages through memory compaction, while trying not to increase the
compaction overhead.  The original objective was to reintroduce
capturing of high-order pages freed by the compaction, before they are
split by concurrent activity.  However, several bugs and opportunities
for simple improvements were found in the current implementation, mostly
through extra tracepoints (which are however too ugly for now to be
considered for sending).

The patches mostly deal with two mechanisms that reduce compaction
overhead, which is caching the progress of migrate and free scanners,
and marking pageblocks where isolation failed to be skipped during
further scans.

Patch 1 (from mgorman) adds tracepoints that allow calculate time spent in
        compaction and potentially debug scanner pfn values.

Patch 2 encapsulates the some functionality for handling deferred compactions
        for better maintainability, without a functional change
        type is not determined without being actually needed.

Patch 3 fixes a bug where cached scanner pfn's are sometimes reset only after
        they have been read to initialize a compaction run.

Patch 4 fixes a bug where scanners meeting is sometimes not properly detected
        and can lead to multiple compaction attempts quitting early without
        doing any work.

Patch 5 improves the chances of sync compaction to process pageblocks that
        async compaction has skipped due to being !MIGRATE_MOVABLE.

Patch 6 improves the chances of sync direct compaction to actually do anything
        when called after async compaction fails during allocation slowpath.

The impact of patches were validated using mmtests's stress-highalloc
benchmark with mmtests's stress-highalloc benchmark on a x86_64 machine
with 4GB memory.

Due to instability of the results (mostly related to the bugs fixed by
patches 2 and 3), 10 iterations were performed, taking min,mean,max
values for success rates and mean values for time and vmstat-based
metrics.

First, the default GFP_HIGHUSER_MOVABLE allocations were tested with the
patches stacked on top of v3.13-rc2.  Patch 2 is OK to serve as baseline
due to no functional changes in 1 and 2.  Comments below.

stress-highalloc
                             3.13-rc2              3.13-rc2              3.13-rc2              3.13-rc2              3.13-rc2
                              2-nothp               3-nothp               4-nothp               5-nothp               6-nothp
Success 1 Min          9.00 (  0.00%)       10.00 (-11.11%)       43.00 (-377.78%)       43.00 (-377.78%)       33.00 (-266.67%)
Success 1 Mean        27.50 (  0.00%)       25.30 (  8.00%)       45.50 (-65.45%)       45.90 (-66.91%)       46.30 (-68.36%)
Success 1 Max         36.00 (  0.00%)       36.00 (  0.00%)       47.00 (-30.56%)       48.00 (-33.33%)       52.00 (-44.44%)
Success 2 Min         10.00 (  0.00%)        8.00 ( 20.00%)       46.00 (-360.00%)       45.00 (-350.00%)       35.00 (-250.00%)
Success 2 Mean        26.40 (  0.00%)       23.50 ( 10.98%)       47.30 (-79.17%)       47.60 (-80.30%)       48.10 (-82.20%)
Success 2 Max         34.00 (  0.00%)       33.00 (  2.94%)       48.00 (-41.18%)       50.00 (-47.06%)       54.00 (-58.82%)
Success 3 Min         65.00 (  0.00%)       63.00 (  3.08%)       85.00 (-30.77%)       84.00 (-29.23%)       85.00 (-30.77%)
Success 3 Mean        76.70 (  0.00%)       70.50 (  8.08%)       86.20 (-12.39%)       85.50 (-11.47%)       86.00 (-12.13%)
Success 3 Max         87.00 (  0.00%)       86.00 (  1.15%)       88.00 ( -1.15%)       87.00 (  0.00%)       87.00 (  0.00%)

            3.13-rc2    3.13-rc2    3.13-rc2    3.13-rc2    3.13-rc2
             2-nothp     3-nothp     4-nothp     5-nothp     6-nothp
User         6437.72     6459.76     5960.32     5974.55     6019.67
System       1049.65     1049.09     1029.32     1031.47     1032.31
Elapsed      1856.77     1874.48     1949.97     1994.22     1983.15

                              3.13-rc2    3.13-rc2    3.13-rc2    3.13-rc2    3.13-rc2
                               2-nothp     3-nothp     4-nothp     5-nothp     6-nothp
Minor Faults                 253952267   254581900   250030122   250507333   250157829
Major Faults                       420         407         506         530         530
Swap Ins                             4           9           9           6           6
Swap Outs                          398         375         345         346         333
Direct pages scanned            197538      189017      298574      287019      299063
Kswapd pages scanned           1809843     1801308     1846674     1873184     1861089
Kswapd pages reclaimed         1806972     1798684     1844219     1870509     1858622
Direct pages reclaimed          197227      188829      298380      286822      298835
Kswapd efficiency                  99%         99%         99%         99%         99%
Kswapd velocity                953.382     970.449     952.243     934.569     922.286
Direct efficiency                  99%         99%         99%         99%         99%
Direct velocity                104.058     101.832     153.961     143.200     148.205
Percentage direct scans             9%          9%         13%         13%         13%
Zone normal velocity           347.289     359.676     348.063     339.933     332.983
Zone dma32 velocity            710.151     712.605     758.140     737.835     737.507
Zone dma velocity                0.000       0.000       0.000       0.000       0.000
Page writes by reclaim         557.600     429.000     353.600     426.400     381.800
Page writes file                   159          53           7          79          48
Page writes anon                   398         375         345         346         333
Page reclaim immediate             825         644         411         575         420
Sector Reads                   2781750     2769780     2878547     2939128     2910483
Sector Writes                 12080843    12083351    12012892    12002132    12010745
Page rescued immediate               0           0           0           0           0
Slabs scanned                  1575654     1545344     1778406     1786700     1794073
Direct inode steals               9657       10037       15795       14104       14645
Kswapd inode steals              46857       46335       50543       50716       51796
Kswapd skipped wait                  0           0           0           0           0
THP fault alloc                     97          91          81          71          77
THP collapse alloc                 456         506         546         544         565
THP splits                           6           5           5           4           4
THP fault fallback                   0           1           0           0           0
THP collapse fail                   14          14          12          13          12
Compaction stalls                 1006         980        1537        1536        1548
Compaction success                 303         284         562         559         578
Compaction failures                702         696         974         976         969
Page migrate success           1177325     1070077     3927538     3781870     3877057
Page migrate failure                 0           0           0           0           0
Compaction pages isolated      2547248     2306457     8301218     8008500     8200674
Compaction migrate scanned    42290478    38832618   153961130   154143900   159141197
Compaction free scanned       89199429    79189151   356529027   351943166   356326727
Compaction cost                   1566        1426        5312        5156        5294
NUMA PTE updates                     0           0           0           0           0
NUMA hint faults                     0           0           0           0           0
NUMA hint local faults               0           0           0           0           0
NUMA hint local percent            100         100         100         100         100
NUMA pages migrated                  0           0           0           0           0
AutoNUMA cost                        0           0           0           0           0

Observations:

- The "Success 3" line is allocation success rate with system idle
  (phases 1 and 2 are with background interference).  I used to get stable
  values around 85% with vanilla 3.11.  The lower min and mean values came
  with 3.12.  This was bisected to commit 81c0a2bb ("mm: page_alloc: fair
  zone allocator policy") As explained in comment for patch 3, I don't
  think the commit is wrong, but that it makes the effect of compaction
  bugs worse.  From patch 3 onwards, the results are OK and match the 3.11
  results.

- Patch 4 also clearly helps phases 1 and 2, and exceeds any results
  I've seen with 3.11 (I didn't measure it that thoroughly then, but it
  was never above 40%).

- Compaction cost and number of scanned pages is higher, especially due
  to patch 4.  However, keep in mind that patches 3 and 4 fix existing
  bugs in the current design of compaction overhead mitigation, they do
  not change it.  If overhead is found unacceptable, then it should be
  decreased differently (and consistently, not due to random conditions)
  than the current implementation does.  In contrast, patches 5 and 6
  (which are not strictly bug fixes) do not increase the overhead (but
  also not success rates).  This might be a limitation of the
  stress-highalloc benchmark as it's quite uniform.

Another set of results is when configuring stress-highalloc t allocate
with similar flags as THP uses:
 (GFP_HIGHUSER_MOVABLE|__GFP_NOMEMALLOC|__GFP_NORETRY|__GFP_NO_KSWAPD)

stress-highalloc
                             3.13-rc2              3.13-rc2              3.13-rc2              3.13-rc2              3.13-rc2
                                2-thp                 3-thp                 4-thp                 5-thp                 6-thp
Success 1 Min          2.00 (  0.00%)        7.00 (-250.00%)       18.00 (-800.00%)       19.00 (-850.00%)       26.00 (-1200.00%)
Success 1 Mean        19.20 (  0.00%)       17.80 (  7.29%)       29.20 (-52.08%)       29.90 (-55.73%)       32.80 (-70.83%)
Success 1 Max         27.00 (  0.00%)       29.00 ( -7.41%)       35.00 (-29.63%)       36.00 (-33.33%)       37.00 (-37.04%)
Success 2 Min          3.00 (  0.00%)        8.00 (-166.67%)       21.00 (-600.00%)       21.00 (-600.00%)       32.00 (-966.67%)
Success 2 Mean        19.30 (  0.00%)       17.90 (  7.25%)       32.20 (-66.84%)       32.60 (-68.91%)       35.70 (-84.97%)
Success 2 Max         27.00 (  0.00%)       30.00 (-11.11%)       36.00 (-33.33%)       37.00 (-37.04%)       39.00 (-44.44%)
Success 3 Min         62.00 (  0.00%)       62.00 (  0.00%)       85.00 (-37.10%)       75.00 (-20.97%)       64.00 ( -3.23%)
Success 3 Mean        66.30 (  0.00%)       65.50 (  1.21%)       85.60 (-29.11%)       83.40 (-25.79%)       83.50 (-25.94%)
Success 3 Max         70.00 (  0.00%)       69.00 (  1.43%)       87.00 (-24.29%)       86.00 (-22.86%)       87.00 (-24.29%)

            3.13-rc2    3.13-rc2    3.13-rc2    3.13-rc2    3.13-rc2
               2-thp       3-thp       4-thp       5-thp       6-thp
User         6547.93     6475.85     6265.54     6289.46     6189.96
System       1053.42     1047.28     1043.23     1042.73     1038.73
Elapsed      1835.43     1821.96     1908.67     1912.74     1956.38

                              3.13-rc2    3.13-rc2    3.13-rc2    3.13-rc2    3.13-rc2
                                 2-thp       3-thp       4-thp       5-thp       6-thp
Minor Faults                 256805673   253106328   253222299   249830289   251184418
Major Faults                       395         375         423         434         448
Swap Ins                            12          10          10          12           9
Swap Outs                          530         537         487         455         415
Direct pages scanned             71859       86046      153244      152764      190713
Kswapd pages scanned           1900994     1870240     1898012     1892864     1880520
Kswapd pages reclaimed         1897814     1867428     1894939     1890125     1877924
Direct pages reclaimed           71766       85908      153167      152643      190600
Kswapd efficiency                  99%         99%         99%         99%         99%
Kswapd velocity               1029.000    1067.782    1000.091     991.049     951.218
Direct efficiency                  99%         99%         99%         99%         99%
Direct velocity                 38.897      49.127      80.747      79.983      96.468
Percentage direct scans             3%          4%          7%          7%          9%
Zone normal velocity           351.377     372.494     348.910     341.689     335.310
Zone dma32 velocity            716.520     744.414     731.928     729.343     712.377
Zone dma velocity                0.000       0.000       0.000       0.000       0.000
Page writes by reclaim         669.300     604.000     545.700     538.900     429.900
Page writes file                   138          66          58          83          14
Page writes anon                   530         537         487         455         415
Page reclaim immediate             806         655         772         548         517
Sector Reads                   2711956     2703239     2811602     2818248     2839459
Sector Writes                 12163238    12018662    12038248    11954736    11994892
Page rescued immediate               0           0           0           0           0
Slabs scanned                  1385088     1388364     1507968     1513292     1558656
Direct inode steals               1739        2564        4622        5496        6007
Kswapd inode steals              47461       46406       47804       48013       48466
Kswapd skipped wait                  0           0           0           0           0
THP fault alloc                    110          82          84          69          70
THP collapse alloc                 445         482         467         462         539
THP splits                           6           5           4           5           3
THP fault fallback                   3           0           0           0           0
THP collapse fail                   15          14          14          14          13
Compaction stalls                  659         685        1033        1073        1111
Compaction success                 222         225         410         427         456
Compaction failures                436         460         622         646         655
Page migrate success            446594      439978     1085640     1095062     1131716
Page migrate failure                 0           0           0           0           0
Compaction pages isolated      1029475     1013490     2453074     2482698     2565400
Compaction migrate scanned     9955461    11344259    24375202    27978356    30494204
Compaction free scanned       27715272    28544654    80150615    82898631    85756132
Compaction cost                    552         555        1344        1379        1436
NUMA PTE updates                     0           0           0           0           0
NUMA hint faults                     0           0           0           0           0
NUMA hint local faults               0           0           0           0           0
NUMA hint local percent            100         100         100         100         100
NUMA pages migrated                  0           0           0           0           0
AutoNUMA cost                        0           0           0           0           0

There are some differences from the previous results for THP-like allocations:

- Here, the bad result for unpatched kernel in phase 3 is much more
  consistent to be between 65-70% and not related to the "regression" in
  3.12.  Still there is the improvement from patch 4 onwards, which brings
  it on par with simple GFP_HIGHUSER_MOVABLE allocations.

- Compaction costs have increased, but nowhere near as much as the
  non-THP case.  Again, the patches should be worth the gained
  determininsm.

- Patches 5 and 6 somewhat increase the number of migrate-scanned pages.
   This is most likely due to __GFP_NO_KSWAPD flag, which means the cached
  pfn's and pageblock skip bits are not reset by kswapd that often (at
  least in phase 3 where no concurrent activity would wake up kswapd) and
  the patches thus help the sync-after-async compaction.  It doesn't
  however show that the sync compaction would help so much with success
  rates, which can be again seen as a limitation of the benchmark
  scenario.

This patch (of 6):

Add two tracepoints for compaction begin and end of a zone.  Using this it
is possible to calculate how much time a workload is spending within
compaction and potentially debug problems related to cached pfns for
scanning.  In combination with the direct reclaim and slab trace points it
should be possible to estimate most allocation-related overhead for a
workload.

Signed-off-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 16:19:48 -08:00
Mel Gorman
286549dcaf sched: add tracepoints related to NUMA task migration
This patch adds three tracepoints
 o trace_sched_move_numa	when a task is moved to a node
 o trace_sched_swap_numa	when a task is swapped with another task
 o trace_sched_stick_numa	when a numa-related migration fails

The tracepoints allow the NUMA scheduler activity to be monitored and the
following high-level metrics can be calculated

 o NUMA migrated stuck	 nr trace_sched_stick_numa
 o NUMA migrated idle	 nr trace_sched_move_numa
 o NUMA migrated swapped nr trace_sched_swap_numa
 o NUMA local swapped	 trace_sched_swap_numa src_nid == dst_nid (should never happen)
 o NUMA remote swapped	 trace_sched_swap_numa src_nid != dst_nid (should == NUMA migrated swapped)
 o NUMA group swapped	 trace_sched_swap_numa src_ngid == dst_ngid
			 Maybe a small number of these are acceptable
			 but a high number would be a major surprise.
			 It would be even worse if bounces are frequent.
 o NUMA avg task migs.	 Average number of migrations for tasks
 o NUMA stddev task mig	 Self-explanatory
 o NUMA max task migs.	 Maximum number of migrations for a single task

In general the intent of the tracepoints is to help diagnose problems
where automatic NUMA balancing appears to be doing an excessive amount
of useless work.

[akpm@linux-foundation.org: remove semicolon-after-if, repair coding-style]
Signed-off-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Alex Thorlton <athorlton@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 16:19:48 -08:00
Mel Gorman
af1839d722 mm: numa: trace tasks that fail migration due to rate limiting
A low local/remote numa hinting fault ratio is potentially explained by
failed migrations.  This patch adds a tracepoint that fires when
migration fails due to migration rate limitation.

Signed-off-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Alex Thorlton <athorlton@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 16:19:48 -08:00
Mel Gorman
1c5e9c27cb mm: numa: limit scope of lock for NUMA migrate rate limiting
NUMA migrate rate limiting protects a migration counter and window using
a lock but in some cases this can be a contended lock.  It is not
critical that the number of pages be perfect, lost updates are
acceptable.  Reduce the importance of this lock.

Signed-off-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Alex Thorlton <athorlton@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 16:19:48 -08:00
Santosh Shilimkar
26f09e9b3a mm/memblock: add memblock memory allocation apis
Introduce memblock memory allocation APIs which allow to support PAE or
LPAE extension on 32 bits archs where the physical memory start address
can be beyond 4GB.  In such cases, existing bootmem APIs which operate
on 32 bit addresses won't work and needs memblock layer which operates
on 64 bit addresses.

So we add equivalent APIs so that we can replace usage of bootmem with
memblock interfaces.  Architectures already converted to NO_BOOTMEM use
these new memblock interfaces.  The architectures which are still not
converted to NO_BOOTMEM continue to function as is because we still
maintain the fal lback option of bootmem back-end supporting these new
interfaces.  So no functional change as such.

In long run, once all the architectures moves to NO_BOOTMEM, we can get
rid of bootmem layer completely.  This is one step to remove the core
code dependency with bootmem and also gives path for architectures to
move away from bootmem.

The proposed interface will became active if both CONFIG_HAVE_MEMBLOCK
and CONFIG_NO_BOOTMEM are specified by arch.  In case
!CONFIG_NO_BOOTMEM, the memblock() wrappers will fallback to the
existing bootmem apis so that arch's not converted to NO_BOOTMEM
continue to work as is.

The meaning of MEMBLOCK_ALLOC_ACCESSIBLE and MEMBLOCK_ALLOC_ANYWHERE
is kept same.

[akpm@linux-foundation.org: s/depricated/deprecated/]
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 16:19:46 -08:00
Grygorii Strashko
b115423357 mm/memblock: switch to use NUMA_NO_NODE instead of MAX_NUMNODES
It's recommended to use NUMA_NO_NODE everywhere to select "process any
node" behavior or to indicate that "no node id specified".

Hence, update __next_free_mem_range*() API's to accept both NUMA_NO_NODE
and MAX_NUMNODES, but emit warning once on MAX_NUMNODES, and correct
corresponding API's documentation to describe new behavior.  Also,
update other memblock/nobootmem APIs where MAX_NUMNODES is used
dirrectly.

The change was suggested by Tejun Heo.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 16:19:46 -08:00
Grygorii Strashko
87029ee939 mm/memblock: reorder parameters of memblock_find_in_range_node
Reorder parameters of memblock_find_in_range_node to be consistent with
other memblock APIs.

The change was suggested by Tejun Heo <tj@kernel.org>.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 16:19:46 -08:00
Grygorii Strashko
10e89523bf mm/bootmem: remove duplicated declaration of __free_pages_bootmem()
The __free_pages_bootmem is used internally by MM core and already
defined in internal.h.  So, remove duplicated declaration.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Reviewed-by: Tejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 16:19:46 -08:00
Oleg Nesterov
0c740d0afc introduce for_each_thread() to replace the buggy while_each_thread()
while_each_thread() and next_thread() should die, almost every lockless
usage is wrong.

1. Unless g == current, the lockless while_each_thread() is not safe.

   while_each_thread(g, t) can loop forever if g exits, next_thread()
   can't reach the unhashed thread in this case. Note that this can
   happen even if g is the group leader, it can exec.

2. Even if while_each_thread() itself was correct, people often use
   it wrongly.

   It was never safe to just take rcu_read_lock() and loop unless
   you verify that pid_alive(g) == T, even the first next_thread()
   can point to the already freed/reused memory.

This patch adds signal_struct->thread_head and task->thread_node to
create the normal rcu-safe list with the stable head.  The new
for_each_thread(g, t) helper is always safe under rcu_read_lock() as
long as this task_struct can't go away.

Note: of course it is ugly to have both task_struct->thread_node and the
old task_struct->thread_group, we will kill it later, after we change
the users of while_each_thread() to use for_each_thread().

Perhaps we can kill it even before we convert all users, we can
reimplement next_thread(t) using the new thread_head/thread_node.  But
we can't do this right now because this will lead to subtle behavioural
changes.  For example, do/while_each_thread() always sees at least one
task, while for_each_thread() can do nothing if the whole thread group
has died.  Or thread_group_empty(), currently its semantics is not clear
unless thread_group_leader(p) and we need to audit the callers before we
can change it.

So this patch adds the new interface which has to coexist with the old
one for some time, hopefully the next changes will be more or less
straightforward and the old one will go away soon.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Sergey Dyasly <dserrg@gmail.com>
Tested-by: Sergey Dyasly <dserrg@gmail.com>
Reviewed-by: Sameer Nanda <snanda@chromium.org>
Acked-by: David Rientjes <rientjes@google.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mandeep Singh Baines <msb@chromium.org>
Cc: "Ma, Xindong" <xindong.ma@intel.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: "Tu, Xiaobing" <xiaobing.tu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 16:19:46 -08:00
Joonsoo Kim
9f32624be9 mm/rmap: use rmap_walk() in page_referenced()
Now, we have an infrastructure in rmap_walk() to handle difference from
variants of rmap traversing functions.

So, just use it in page_referenced().

In this patch, I change following things.

1. remove some variants of rmap traversing functions.
	cf> page_referenced_ksm, page_referenced_anon,
	page_referenced_file

2. introduce new struct page_referenced_arg and pass it to
   page_referenced_one(), main function of rmap_walk, in order to count
   reference, to store vm_flags and to check finish condition.

3. mechanical change to use rmap_walk() in page_referenced().

[liwanp@linux.vnet.ibm.com: fix BUG at rmap_walk]
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Hillf Danton <dhillf@gmail.com>
Signed-off-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 16:19:45 -08:00
Joonsoo Kim
e8351ac9bf mm/rmap: use rmap_walk() in try_to_munlock()
Now, we have an infrastructure in rmap_walk() to handle difference from
variants of rmap traversing functions.

So, just use it in try_to_munlock().

In this patch, I change following things.

1. remove some variants of rmap traversing functions.
	cf> try_to_unmap_ksm, try_to_unmap_anon, try_to_unmap_file
2. mechanical change to use rmap_walk() in try_to_munlock().
3. copy and paste comments.

Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Hillf Danton <dhillf@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 16:19:45 -08:00
Joonsoo Kim
5262950642 mm/rmap: use rmap_walk() in try_to_unmap()
Now, we have an infrastructure in rmap_walk() to handle difference from
variants of rmap traversing functions.

So, just use it in try_to_unmap().

In this patch, I change following things.

1. enable rmap_walk() if !CONFIG_MIGRATION.
2. mechanical change to use rmap_walk() in try_to_unmap().

Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Hillf Danton <dhillf@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 16:19:45 -08:00
Joonsoo Kim
0dd1c7bbce mm/rmap: extend rmap_walk_xxx() to cope with different cases
There are a lot of common parts in traversing functions, but there are
also a little of uncommon parts in it.  By assigning proper function
pointer on each rmap_walker_control, we can handle these difference
correctly.

Following are differences we should handle.

1. difference of lock function in anon mapping case
2. nonlinear handling in file mapping case
3. prechecked condition:
	checking memcg in page_referenced(),
	checking VM_SHARE in page_mkclean()
	checking temporary vma in try_to_unmap()
4. exit condition:
	checking page_mapped() in try_to_unmap()

So, in this patch, I introduce 4 function pointers to handle above
differences.

Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Hillf Danton <dhillf@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 16:19:45 -08:00
Joonsoo Kim
051ac83adf mm/rmap: make rmap_walk to get the rmap_walk_control argument
In each rmap traverse case, there is some difference so that we need
function pointers and arguments to them in order to handle these

For this purpose, struct rmap_walk_control is introduced in this patch,
and will be extended in following patch.  Introducing and extending are
separate, because it clarify changes.

Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Hillf Danton <dhillf@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 16:19:45 -08:00
Tang Chen
55ac590c2f memblock, mem_hotplug: make memblock skip hotpluggable regions if needed
Linux kernel cannot migrate pages used by the kernel.  As a result,
hotpluggable memory used by the kernel won't be able to be hot-removed.
To solve this problem, the basic idea is to prevent memblock from
allocating hotpluggable memory for the kernel at early time, and arrange
all hotpluggable memory in ACPI SRAT(System Resource Affinity Table) as
ZONE_MOVABLE when initializing zones.

In the previous patches, we have marked hotpluggable memory regions with
MEMBLOCK_HOTPLUG flag in memblock.memory.

In this patch, we make memblock skip these hotpluggable memory regions
in the default top-down allocation function if movable_node boot option
is specified.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "Rafael J . Wysocki" <rjw@sisk.pl>
Cc: Chen Tang <imtangchen@gmail.com>
Cc: Gong Chen <gong.chen@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiang Liu <jiang.liu@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Larry Woodman <lwoodman@redhat.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Liu Jiang <jiang.liu@huawei.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Taku Izumi <izumi.taku@jp.fujitsu.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Renninger <trenn@suse.de>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com>
Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 16:19:45 -08:00
Tang Chen
e7e8de5918 memblock: make memblock_set_node() support different memblock_type
[sfr@canb.auug.org.au: fix powerpc build]
Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
Reviewed-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "Rafael J . Wysocki" <rjw@sisk.pl>
Cc: Chen Tang <imtangchen@gmail.com>
Cc: Gong Chen <gong.chen@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiang Liu <jiang.liu@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Larry Woodman <lwoodman@redhat.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Liu Jiang <jiang.liu@huawei.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Taku Izumi <izumi.taku@jp.fujitsu.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Renninger <trenn@suse.de>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com>
Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 16:19:44 -08:00
Tang Chen
66b16edf9e memblock, mem_hotplug: introduce MEMBLOCK_HOTPLUG flag to mark hotpluggable regions
In find_hotpluggable_memory, once we find out a memory region which is
hotpluggable, we want to mark them in memblock.memory.  So that we could
control memblock allocator not to allocte hotpluggable memory for the
kernel later.

To achieve this goal, we introduce MEMBLOCK_HOTPLUG flag to indicate the
hotpluggable memory regions in memblock and a function
memblock_mark_hotplug() to mark hotpluggable memory if we find one.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
Reviewed-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "Rafael J . Wysocki" <rjw@sisk.pl>
Cc: Chen Tang <imtangchen@gmail.com>
Cc: Gong Chen <gong.chen@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiang Liu <jiang.liu@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Larry Woodman <lwoodman@redhat.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Liu Jiang <jiang.liu@huawei.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Taku Izumi <izumi.taku@jp.fujitsu.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Renninger <trenn@suse.de>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com>
Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 16:19:44 -08:00
Tang Chen
66a2075721 memblock, numa: introduce flags field into memblock
There is no flag in memblock to describe what type the memory is.
Sometimes, we may use memblock to reserve some memory for special usage.
And we want to know what kind of memory it is.  So we need a way to

In hotplug environment, we want to reserve hotpluggable memory so the
kernel won't be able to use it.  And when the system is up, we have to
free these hotpluggable memory to buddy.  So we need to mark these
memory first.

In order to do so, we need to mark out these special memory in memblock.
In this patch, we introduce a new "flags" member into memblock_region:

   struct memblock_region {
           phys_addr_t base;
           phys_addr_t size;
           unsigned long flags;		/* This is new. */
   #ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP
           int nid;
   #endif
   };

This patch does the following things:
1) Add "flags" member to memblock_region.
2) Modify the following APIs' prototype:
	memblock_add_region()
	memblock_insert_region()
3) Add memblock_reserve_region() to support reserve memory with flags, and keep
   memblock_reserve()'s prototype unmodified.
4) Modify other APIs to support flags, but keep their prototype unmodified.

The idea is from Wen Congyang <wency@cn.fujitsu.com> and Liu Jiang <jiang.liu@huawei.com>.

Suggested-by: Wen Congyang <wency@cn.fujitsu.com>
Suggested-by: Liu Jiang <jiang.liu@huawei.com>
Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
Reviewed-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "Rafael J . Wysocki" <rjw@sisk.pl>
Cc: Chen Tang <imtangchen@gmail.com>
Cc: Gong Chen <gong.chen@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiang Liu <jiang.liu@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Larry Woodman <lwoodman@redhat.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Taku Izumi <izumi.taku@jp.fujitsu.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Renninger <trenn@suse.de>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com>
Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 16:19:44 -08:00
Jerome Marchand
49f0ce5f92 mm: add overcommit_kbytes sysctl variable
Some applications that run on HPC clusters are designed around the
availability of RAM and the overcommit ratio is fine tuned to get the
maximum usage of memory without swapping.  With growing memory, the
1%-of-all-RAM grain provided by overcommit_ratio has become too coarse
for these workload (on a 2TB machine it represents no less than 20GB).

This patch adds the new overcommit_kbytes sysctl variable that allow a
much finer grain.

[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: fix nommu build]
Signed-off-by: Jerome Marchand <jmarchan@redhat.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 16:19:44 -08:00
Mel Gorman
aec6a8889a mm, show_mem: remove SHOW_MEM_FILTER_PAGE_COUNT
Commit 4b59e6c473 ("mm, show_mem: suppress page counts in
non-blockable contexts") introduced SHOW_MEM_FILTER_PAGE_COUNT to
suppress PFN walks on large memory machines.  Commit c78e93630d ("mm:
do not walk all of system memory during show_mem") avoided a PFN walk in
the generic show_mem helper which removes the requirement for
SHOW_MEM_FILTER_PAGE_COUNT in that case.

This patch removes PFN walkers from the arch-specific implementations
that report on a per-node or per-zone granularity.  ARM and unicore32
still do a PFN walk as they report memory usage on each bank which is a
much finer granularity where the debugging information may still be of
use.  As the remaining arches doing PFN walks have relatively small
amounts of memory, this patch simply removes SHOW_MEM_FILTER_PAGE_COUNT.

[akpm@linux-foundation.org: fix parisc]
Signed-off-by: Mel Gorman <mgorman@suse.de>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: James Bottomley <jejb@parisc-linux.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 16:19:44 -08:00
David Rientjes
d80be7c751 mm, mempolicy: remove unneeded functions for UMA configs
Mempolicies only exist for CONFIG_NUMA configurations.  Therefore, a
certain class of functions are unneeded in configurations where
CONFIG_NUMA is disabled such as functions that duplicate existing
mempolicies, lookup existing policies, set certain mempolicy traits, or
test mempolicies for certain attributes.

Remove the unneeded functions so that any future callers get a compile-
time error and protect their code with CONFIG_NUMA as required.

Signed-off-by: David Rientjes <rientjes@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 16:19:44 -08:00
Kirill A. Shutemov
b35f1819ac mm: create a separate slab for page->ptl allocation
If DEBUG_SPINLOCK and DEBUG_LOCK_ALLOC are enabled spinlock_t on x86_64
is 72 bytes.  For page->ptl they will be allocated from kmalloc-96 slab,
so we loose 24 on each.  An average system can easily allocate few tens
thousands of page->ptl and overhead is significant.

Let's create a separate slab for page->ptl allocation to solve this.

To make sure that it really works this time, some numbers from my test
machine (just booted, no load):

Before:
  # grep '^\(kmalloc-96\|page->ptl\)' /proc/slabinfo
  kmalloc-96         31987  32190    128   30    1 : tunables  120   60    8 : slabdata   1073   1073     92
After:
  # grep '^\(kmalloc-96\|page->ptl\)' /proc/slabinfo
  page->ptl          27516  28143     72   53    1 : tunables  120   60    8 : slabdata    531    531      9
  kmalloc-96          3853   5280    128   30    1 : tunables  120   60    8 : slabdata    176    176      0

Note that the patch is useful not only for debug case, but also for
PREEMPT_RT, where spinlock_t is always bloated.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 16:19:44 -08:00
Yasuaki Ishimatsu
943dca1a1f mm: get rid of unnecessary pageblock scanning in setup_zone_migrate_reserve
Yasuaki Ishimatsu reported memory hot-add spent more than 5 _hours_ on
9TB memory machine since onlining memory sections is too slow.  And we
found out setup_zone_migrate_reserve spent >90% of the time.

The problem is, setup_zone_migrate_reserve scans all pageblocks
unconditionally, but it is only necessary if the number of reserved
block was reduced (i.e.  memory hot remove).

Moreover, maximum MIGRATE_RESERVE per zone is currently 2.  It means
that the number of reserved pageblocks is almost always unchanged.

This patch adds zone->nr_migrate_reserve_block to maintain the number of
MIGRATE_RESERVE pageblocks and it reduces the overhead of
setup_zone_migrate_reserve dramatically.  The following table shows time
of onlining a memory section.

  Amount of memory     | 128GB | 192GB | 256GB|
  ---------------------------------------------
  linux-3.12           |  23.9 |  31.4 | 44.5 |
  This patch           |   8.3 |   8.3 |  8.6 |
  Mel's proposal patch |  10.9 |  19.2 | 31.3 |
  ---------------------------------------------
                                   (millisecond)

  128GB : 4 nodes and each node has 32GB of memory
  192GB : 6 nodes and each node has 32GB of memory
  256GB : 8 nodes and each node has 32GB of memory

  (*1) Mel proposed his idea by the following threads.
       https://lkml.org/lkml/2013/10/30/272

[akpm@linux-foundation.org: tweak comment]
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Reported-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Tested-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 16:19:43 -08:00
Oleg Nesterov
5eaf1a9e23 mm: thp: turn compound_head() into BUG_ON(!PageTail) in get_huge_page_tail()
get_huge_page_tail()->compound_head() looks confusing.  Every caller
must check PageTail(page), otherwise atomic_inc(&page->_mapcount) is
simply wrong if this page is compound-trans-head.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Dave Jones <davej@redhat.com>
Cc: Darren Hart <dvhart@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Acked-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 16:19:43 -08:00
Andrea Arcangeli
44518d2b32 mm: tail page refcounting optimization for slab and hugetlbfs
This skips the _mapcount mangling for slab and hugetlbfs pages.

The main trouble in doing this is to guarantee that PageSlab and
PageHeadHuge remains constant for all get_page/put_page run on the tail
of slab or hugetlbfs compound pages.  Otherwise if they're set during
get_page but not set during put_page, the _mapcount of the tail page
would underflow.

PageHeadHuge will remain true until the compound page is released and
enters the buddy allocator so it won't risk to change even if the tail
page is the last reference left on the page.

PG_slab instead is cleared before the slab frees the head page with
put_page, so if the tail pin is released after the slab freed the page,
we would have a problem.  But in the slab case the tail pin cannot be
the last reference left on the page.  This is because the slab code is
free to reuse the compound page after a kfree/kmem_cache_free without
having to check if there's any tail pin left.  In turn all tail pins
must be always released while the head is still pinned by the slab code
and so we know PG_slab will be still set too.

Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: Khalid Aziz <khalid.aziz@oracle.com>
Cc: Pravin Shelar <pshelar@nicira.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ben Hutchings <bhutchings@solarflare.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 16:19:43 -08:00
Andrea Arcangeli
ca641514f4 mm: thp: optimize compound_trans_huge
Currently we don't clobber page_tail->first_page during split_huge_page,
so compound_trans_head can be set to compound_head without adverse
effects, and this mostly optimizes away a smp_rmb.

It looks worthwhile to keep around the implementation that doesn't relay
on page_tail->first_page not to be clobbered, because it would be
necessary if we'll decide to enforce page->private to zero at all times
whenever PG_private is not set, also for anonymous pages.  For anonymous
pages enforcing such an invariant doesn't matter as anonymous pages
don't use page->private so we can get away with this microoptimization.

Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Khalid Aziz <khalid.aziz@oracle.com>
Cc: Pravin Shelar <pshelar@nicira.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ben Hutchings <bhutchings@solarflare.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 16:19:43 -08:00
Dave Hansen
0e147aed4c mm: hugetlbfs: Add some VM_BUG_ON()s to catch non-hugetlbfs pages
Dave Jiang reported that he was seeing oopses when running NUMA systems
and default_hugepagesz=1G.  I traced the issue down to
migrate_page_copy() trying to use the same code for hugetlb pages and
transparent hugepages.  It should not have been trying to pass thp pages
in there.

So, add some VM_BUG_ON()s for the next hapless VM developer that tries
the same thing.

Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Tested-by: Dave Jiang <dave.jiang@intel.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 16:19:43 -08:00
Geert Uytterhoeven
f92f455f67 mm: Make {,set}page_address() static inline if WANT_PAGE_VIRTUAL
{,set}page_address() are macros if WANT_PAGE_VIRTUAL.  If
!WANT_PAGE_VIRTUAL, they're plain C functions.

If someone calls them with a void *, this pointer is auto-converted to
struct page * if !WANT_PAGE_VIRTUAL, but causes a build failure on
architectures using WANT_PAGE_VIRTUAL (arc, m68k and sparc64):

  drivers/md/bcache/bset.c: In function `__btree_sort':
  drivers/md/bcache/bset.c:1190: warning: dereferencing `void *' pointer
  drivers/md/bcache/bset.c:1190: error: request for member `virtual' in something not a structure or union

Convert them to static inline functions to fix this.  There are already
plenty of users of struct page members inside <linux/mm.h>, so there's
no reason to keep them as macros.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 16:19:43 -08:00
Andrew Morton
0afaa12047 posix_acl: uninlining
Uninline vast tracts of nested inline functions in
include/linux/posix_acl.h.

This reduces the text+data+bss size of x86_64 allyesconfig vmlinux by
8026 bytes.

The patch also regularises the positioning of the EXPORT_SYMBOLs in
posix_acl.c.

Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: J. Bruce Fields <bfields@fieldses.org>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Tested-by: Benny Halevy <bhalevy@primarydata.com>
Cc: Benny Halevy <bhalevy@panasas.com>
Cc: Andreas Gruenbacher <agruen@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 16:19:42 -08:00