In commit e3a77561e7 ("tipc: split up function tipc_msg_eval()"),
we have updated the function tipc_msg_lookup_dest() to set the error
codes to negative values at destination lookup failures. Thus when
the function sets the error code to -TIPC_ERR_NO_NAME, its inserted
into the 4 bit error field of the message header as 0xf instead of
TIPC_ERR_NO_NAME (1). The value 0xf is an unknown error code.
In this commit, we set only positive error code.
Fixes: e3a77561e7 ("tipc: split up function tipc_msg_eval()")
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The UDP early demux can leverate the rx dst cache even for
multicast unconnected sockets.
In such scenario the ipv4 source address is validated only on
the first packet in the given flow. After that, when we fetch
the dst entry from the socket rx cache, we stop enforcing
the rp_filter and we even start accepting any kind of martian
addresses.
Disabling the dst cache for unconnected multicast socket will
cause large performace regression, nearly reducing by half the
max ingress tput.
Instead we factor out a route helper to completely validate an
skb source address for multicast packets and we call it from
the UDP early demux for mcast packets landing on unconnected
sockets, after successful fetching the related cached dst entry.
This still gives a measurable, but limited performance
regression:
rp_filter = 0 rp_filter = 1
edmux disabled: 1182 Kpps 1127 Kpps
edmux before: 2238 Kpps 2238 Kpps
edmux after: 2037 Kpps 2019 Kpps
The above figures are on top of current net tree.
Applying the net-next commit 6e617de84e ("net: avoid a full
fib lookup when rp_filter is disabled.") the delta with
rp_filter == 0 will decrease even more.
Fixes: 421b3885bf ("udp: ipv4: Add udp early demux")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently no error is emitted, but this infrastructure will
used by the next patch to allow source address validation
for mcast sockets.
Since early demux can do a route lookup and an ipv4 route
lookup can return an error code this is consistent with the
current ipv4 route infrastructure.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now when updating mtu in tx path, it doesn't consider ARPHRD_ETHER tunnel
device, like ip6gre_tap tunnel, for which it should also subtract ether
header to get the correct mtu.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The patch 'ip_gre: ipgre_tap device should keep dst' fixed
a issue that ipgre_tap mtu couldn't be updated in tx path.
The same fix is needed for ip6gre_tap as well.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Without keeping dst, the tunnel will not update any mtu/pmtu info,
since it does not have a dst on the skb.
Reproducer:
client(ipgre_tap1 - eth1) <-----> (eth1 - ipgre_tap1)server
After reducing eth1's mtu on client, then perforamnce became 0.
This patch is to netif_keep_dst in gre_tap_init, as ipgre does.
Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Drivers that use the start method for netlink dumping rely on dumpit not
being called if start fails. For example, ila_xlat.c allocates memory
and assigns it to cb->args[0] in its start() function. It might fail to
do that and return -ENOMEM instead. However, even when returning an
error, dumpit will be called, which, in the example above, quickly
dereferences the memory in cb->args[0], which will OOPS the kernel. This
is but one example of how this goes wrong.
Since start() has always been a function with an int return type, it
therefore makes sense to use it properly, rather than ignoring it. This
patch thus returns early and does not call dumpit() when start() fails.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
It is possible for ebt_in_hook to be triggered before ebt_table is assigned
resulting in a NULL-pointer dereference. Make sure hooks are
registered as the last step.
Fixes: aee12a0a37 ("ebtables: remove nf_hook_register usage")
Signed-off-by: Artem Savkov <asavkov@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Fix a race between ip_set_dump_start() and ip_set_swap().
The race is as follows:
* Without holding the ref lock, ip_set_swap() checks ref_netlink of the
set and it is 0.
* ip_set_dump_start() takes a reference on the set.
* ip_set_swap() does the swap (even though it now has a non-zero
reference count).
* ip_set_dump_start() gets the set from ip_set_list again which is now a
different set since it has been swapped.
* ip_set_dump_start() calls __ip_set_put_netlink() and hits a BUG_ON due
to the reference count being 0.
Fix this race by extending the critical region in which the ref lock is
held to include checking the ref counts.
The race can be reproduced with the following script:
while :; do
ipset destroy hash_ip1
ipset destroy hash_ip2
ipset create hash_ip1 hash:ip family inet hashsize 1024 \
maxelem 500000
ipset create hash_ip2 hash:ip family inet hashsize 300000 \
maxelem 500000
ipset create hash_ip3 hash:ip family inet hashsize 1024 \
maxelem 500000
ipset save &
ipset swap hash_ip3 hash_ip2
ipset destroy hash_ip3
wait
done
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Acked-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This reverts commit dbbccdc4ce.
It turns out that the "legacy" users aren't so legacy at all, and that
turning off the legacy ioctl will break the current Qt bluetooth stack
for bluetooth LE devices that were released just a couple of months ago.
So it's simply not true that this was a legacy interface that hasn't
been needed and is only limited to old legacy BT devices. Because I
actually read Kconfig help messages, and actively try to turn off
features that I don't need, I turned the option off.
Then I spent _way_ too much time debugging BLE issues until I realized
that it wasn't the Qt and subsurface development that had broken one of
my dive computer BLE downloads, but simply my broken kernel config.
Maybe in a decade it will be true that this is a legacy interface. And
maybe with a better help-text and correct dependencies, this kind of
legacy removal might be acceptable. But as things are right now both
the commit message and the Kconfig help text were misleading, and the
Kconfig option had the wrong dependenencies.
There's no reason to keep that broken Kconfig option in the tree.
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
sk->sk_prot and sk->sk_prot_creator can differ when the app uses
IPV6_ADDRFORM (transforming an IPv6-socket to an IPv4-one).
Which is why sk_prot_creator is there to make sure that sk_prot_free()
does the kmem_cache_free() on the right kmem_cache slab.
Now, if such a socket gets transformed back to a listening socket (using
connect() with AF_UNSPEC) we will allocate an IPv4 tcp_sock through
sk_clone_lock() when a new connection comes in. But sk_prot_creator will
still point to the IPv6 kmem_cache (as everything got copied in
sk_clone_lock()). When freeing, we will thus put this
memory back into the IPv6 kmem_cache although it was allocated in the
IPv4 cache. I have seen memory corruption happening because of this.
With slub-debugging and MEMCG_KMEM enabled this gives the warning
"cache_from_obj: Wrong slab cache. TCPv6 but object is from TCP"
A C-program to trigger this:
void main(void)
{
int fd = socket(AF_INET6, SOCK_STREAM, IPPROTO_TCP);
int new_fd, newest_fd, client_fd;
struct sockaddr_in6 bind_addr;
struct sockaddr_in bind_addr4, client_addr1, client_addr2;
struct sockaddr unsp;
int val;
memset(&bind_addr, 0, sizeof(bind_addr));
bind_addr.sin6_family = AF_INET6;
bind_addr.sin6_port = ntohs(42424);
memset(&client_addr1, 0, sizeof(client_addr1));
client_addr1.sin_family = AF_INET;
client_addr1.sin_port = ntohs(42424);
client_addr1.sin_addr.s_addr = inet_addr("127.0.0.1");
memset(&client_addr2, 0, sizeof(client_addr2));
client_addr2.sin_family = AF_INET;
client_addr2.sin_port = ntohs(42421);
client_addr2.sin_addr.s_addr = inet_addr("127.0.0.1");
memset(&unsp, 0, sizeof(unsp));
unsp.sa_family = AF_UNSPEC;
bind(fd, (struct sockaddr *)&bind_addr, sizeof(bind_addr));
listen(fd, 5);
client_fd = socket(AF_INET, SOCK_STREAM, IPPROTO_TCP);
connect(client_fd, (struct sockaddr *)&client_addr1, sizeof(client_addr1));
new_fd = accept(fd, NULL, NULL);
close(fd);
val = AF_INET;
setsockopt(new_fd, SOL_IPV6, IPV6_ADDRFORM, &val, sizeof(val));
connect(new_fd, &unsp, sizeof(unsp));
memset(&bind_addr4, 0, sizeof(bind_addr4));
bind_addr4.sin_family = AF_INET;
bind_addr4.sin_port = ntohs(42421);
bind(new_fd, (struct sockaddr *)&bind_addr4, sizeof(bind_addr4));
listen(new_fd, 5);
client_fd = socket(AF_INET, SOCK_STREAM, IPPROTO_TCP);
connect(client_fd, (struct sockaddr *)&client_addr2, sizeof(client_addr2));
newest_fd = accept(new_fd, NULL, NULL);
close(new_fd);
close(client_fd);
close(new_fd);
}
As far as I can see, this bug has been there since the beginning of the
git-days.
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Packet socket option po->has_vnet_hdr can be updated concurrently with
other operations if no ring is attached.
Do not test the option twice in packet_snd, as the value may change in
between calls. A race on setsockopt disable may cause a packet > mtu
to be sent without having GSO options set.
Fixes: bfd5f4a3d6 ("packet: Add GSO/csum offload support.")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Once a socket has po->fanout set, it remains a member of the group
until it is destroyed. The prot_hook must be constant and identical
across sockets in the group.
If fanout_add races with packet_do_bind between the test of po->fanout
and taking the lock, the bind call may make type or dev inconsistent
with that of the fanout group.
Hold po->bind_lock when testing po->fanout to avoid this race.
I had to introduce artificial delay (local_bh_enable) to actually
observe the race.
Fixes: dc99f60069 ("packet: Add fanout support.")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We cannot be registering the network device first, then setting its
carrier off and finally connecting it to a PHY, doing that leaves a
window during which the carrier is at best inconsistent, and at worse
the device is not usable without a down/up sequence since the network
device is visible to user space with possibly no PHY device attached.
Re-order steps so that they make logical sense. This fixes some devices
where the port was not usable after e.g: an unbind then bind of the
driver.
Fixes: 0071f56e46 ("dsa: Register netdev before phy")
Fixes: 91da11f870 ("net: Distributed Switch Architecture protocol support")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
My prior fix was not complete, as we were dereferencing a pointer
three times per node, not twice as I initially thought.
Fixes: 4cc5b44b29 ("inetpeer: fix RCU lookup()")
Fixes: b145425f26 ("inetpeer: remove AVL implementation in favor of RB tree")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
I might be wrong but it doesn't look like xfrm_state_lock is required
for xfrm_policy_cache_flush and calling it under this lock triggers both
"sleeping function called from invalid context" and "possible circular
locking dependency detected" warnings on flush.
Fixes: ec30d78c14 xfrm: add xdst pcpu cache
Signed-off-by: Artem Savkov <asavkov@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
The sctp_for_each_transport() function takes an pointer to int. The
cb->args[] array holds longs so it's only using the high 32 bits. It
works on little endian system but will break on big endian 64 bit
machines.
Fixes: d25adbeb0c ("sctp: fix an use-after-free issue in sctp_sock_dump")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Removing the ipset module leaves a small window where one cpu performs
module removal while another runs a command like 'ipset flush'.
ipset uses net_generic(), unregistering the pernet ops frees this
storage area.
Fix it by first removing the user-visible api handlers and the pernet
ops last.
Fixes: 1785e8f473 ("netfiler: ipset: Add net namespace for ipset")
Reported-by: Li Shuang <shuali@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Wrong comparison prevented the hash types to add a range with more than
2^31 addresses but reported as a success.
Fixes Netfilter's bugzilla id #1005, reported by Oleg Serditov and
Oliver Ford.
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
If we try to delete the same tunnel twice, the first delete operation
does a lookup (l2tp_tunnel_get), finds the tunnel, calls
l2tp_tunnel_delete, which queues it for deletion by
l2tp_tunnel_del_work.
The second delete operation also finds the tunnel and calls
l2tp_tunnel_delete. If the workqueue has already fired and started
running l2tp_tunnel_del_work, then l2tp_tunnel_delete will queue the
same tunnel a second time, and try to free the socket again.
Add a dead flag to prevent firing the workqueue twice. Then we can
remove the check of queue_work's result that was meant to prevent that
race but doesn't.
Reproducer:
ip l2tp add tunnel tunnel_id 3000 peer_tunnel_id 4000 local 192.168.0.2 remote 192.168.0.1 encap udp udp_sport 5000 udp_dport 6000
ip l2tp add session name l2tp1 tunnel_id 3000 session_id 1000 peer_session_id 2000
ip link set l2tp1 up
ip l2tp del tunnel tunnel_id 3000
ip l2tp del tunnel tunnel_id 3000
Fixes: f8ccac0e44 ("l2tp: put tunnel socket release on a workqueue")
Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Acked-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
When running LTP IPsec tests, KASan might report:
BUG: KASAN: use-after-free in vti_tunnel_xmit+0xeee/0xff0 [ip_vti]
Read of size 4 at addr ffff880dc6ad1980 by task swapper/0/0
...
Call Trace:
<IRQ>
dump_stack+0x63/0x89
print_address_description+0x7c/0x290
kasan_report+0x28d/0x370
? vti_tunnel_xmit+0xeee/0xff0 [ip_vti]
__asan_report_load4_noabort+0x19/0x20
vti_tunnel_xmit+0xeee/0xff0 [ip_vti]
? vti_init_net+0x190/0x190 [ip_vti]
? save_stack_trace+0x1b/0x20
? save_stack+0x46/0xd0
dev_hard_start_xmit+0x147/0x510
? icmp_echo.part.24+0x1f0/0x210
__dev_queue_xmit+0x1394/0x1c60
...
Freed by task 0:
save_stack_trace+0x1b/0x20
save_stack+0x46/0xd0
kasan_slab_free+0x70/0xc0
kmem_cache_free+0x81/0x1e0
kfree_skbmem+0xb1/0xe0
kfree_skb+0x75/0x170
kfree_skb_list+0x3e/0x60
__dev_queue_xmit+0x1298/0x1c60
dev_queue_xmit+0x10/0x20
neigh_resolve_output+0x3a8/0x740
ip_finish_output2+0x5c0/0xe70
ip_finish_output+0x4ba/0x680
ip_output+0x1c1/0x3a0
xfrm_output_resume+0xc65/0x13d0
xfrm_output+0x1e4/0x380
xfrm4_output_finish+0x5c/0x70
Can be fixed if we get skb->len before dst_output().
Fixes: b9959fd3b0 ("vti: switch to new ip tunnel code")
Fixes: 22e1b23daf ("vti6: Support inter address family tunneling.")
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
IPVS tunnel mode works as simple tunnel (see RFC 3168) copying ECN field
to outer header. That's result in packet drops on egress tunnels in case
the egress tunnel operates as ECN-capable with Full-functionality option
(like ip_tunnel and ip6_tunnel kernel modules), according to RFC 3168
section 9.1.1 recommendation.
This patch implements ECN full-functionality option into ipvs xmit code.
Cc: netdev@vger.kernel.org
Cc: lvs-devel@vger.kernel.org
Signed-off-by: Vadim Fedorenko <vfedorenko@yandex-team.ru>
Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
There are several ways to remove L2TP sessions:
* deleting a session explicitly using the netlink interface (with
L2TP_CMD_SESSION_DELETE),
* deleting the session's parent tunnel (either by closing the
tunnel's file descriptor or using the netlink interface),
* closing the PPPOL2TP file descriptor of a PPP pseudo-wire.
In some cases, when these methods are used concurrently on the same
session, the session can be removed twice, leading to use-after-free
bugs.
This patch adds a 'dead' flag, used by l2tp_session_delete() and
l2tp_tunnel_closeall() to prevent them from stepping on each other's
toes.
The session deletion path used when closing a PPPOL2TP file descriptor
doesn't need to be adapted. It already has to ensure that a session
remains valid for the lifetime of its PPPOL2TP file descriptor.
So it takes an extra reference on the session in the ->session_close()
callback (pppol2tp_session_close()), which is eventually dropped
in the ->sk_destruct() callback of the PPPOL2TP socket
(pppol2tp_session_destruct()).
Still, __l2tp_session_unhash() and l2tp_session_queue_purge() can be
called twice and even concurrently for a given session, but thanks to
proper locking and re-initialisation of list fields, this is not an
issue.
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
If l2tp_tunnel_delete() or l2tp_tunnel_closeall() deletes a session
right after pppol2tp_release() orphaned its socket, then the 'sock'
variable of the pppol2tp_session_close() callback is NULL. Yet the
session is still used by pppol2tp_release().
Therefore we need to take an extra reference in any case, to prevent
l2tp_tunnel_delete() or l2tp_tunnel_closeall() from freeing the session.
Since the pppol2tp_session_close() callback is only set if the session
is associated to a PPPOL2TP socket and that both l2tp_tunnel_delete()
and l2tp_tunnel_closeall() hold the PPPOL2TP socket before calling
pppol2tp_session_close(), we're sure that pppol2tp_session_close() and
pppol2tp_session_destruct() are paired and called in the right order.
So the reference taken by the former will be released by the later.
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
The ib_mr->length represents the length of the MR in bytes as per
the IBTA spec 1.3 section 11.2.10.3 (REGISTER PHYSICAL MEMORY REGION).
Currently ib_mr->length field is defined as only 32-bits field.
This might result into truncation and failed WRs of consumers who
registers more than 4GB bytes memory regions and whose WRs accessing
such MRs.
This patch makes the length 64-bit to avoid such truncation.
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Faisal Latif <faisal.latif@intel.com>
Fixes: 4c67e2bfc8 ("IB/core: Introduce new fast registration API")
Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Pull networking fixes from David Miller:
1) Fix NAPI poll list corruption in enic driver, from Christian
Lamparter.
2) Fix route use after free, from Eric Dumazet.
3) Fix regression in reuseaddr handling, from Josef Bacik.
4) Assert the size of control messages in compat handling since we copy
it in from userspace twice. From Meng Xu.
5) SMC layer bug fixes (missing RCU locking, bad refcounting, etc.)
from Ursula Braun.
6) Fix races in AF_PACKET fanout handling, from Willem de Bruijn.
7) Don't use ARRAY_SIZE on spinlock array which might have zero
entries, from Geert Uytterhoeven.
8) Fix miscomputation of checksum in ipv6 udp code, from Subash Abhinov
Kasiviswanathan.
9) Push the ipv6 header properly in ipv6 GRE tunnel driver, from Xin
Long.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (75 commits)
inet: fix improper empty comparison
net: use inet6_rcv_saddr to compare sockets
net: set tb->fast_sk_family
net: orphan frags on stand-alone ptype in dev_queue_xmit_nit
MAINTAINERS: update git tree locations for ieee802154 subsystem
net: prevent dst uses after free
net: phy: Fix truncation of large IRQ numbers in phy_attached_print()
net/smc: no close wait in case of process shut down
net/smc: introduce a delay
net/smc: terminate link group if out-of-sync is received
net/smc: longer delay for client link group removal
net/smc: adapt send request completion notification
net/smc: adjust net_device refcount
net/smc: take RCU read lock for routing cache lookup
net/smc: add receive timeout check
net/smc: add missing dev_put
net: stmmac: Cocci spatch "of_table"
lan78xx: Use default values loaded from EEPROM/OTP after reset
lan78xx: Allow EEPROM write for less than MAX_EEPROM_SIZE
lan78xx: Fix for eeprom read/write when device auto suspend
...
When doing my reuseport rework I screwed up and changed a
if (hlist_empty(&tb->owners))
to
if (!hlist_empty(&tb->owners))
This is obviously bad as all of the reuseport/reuse logic was reversed,
which caused weird problems like allowing an ipv4 bind conflict if we
opened an ipv4 only socket on a port followed by an ipv6 only socket on
the same port.
Fixes: b9470c2760 ("inet: kill smallest_size and smallest_port")
Reported-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In ipv6_rcv_saddr_equal() we need to use inet6_rcv_saddr(sk) for the
ipv6 compare with the fast socket information to make sure we're doing
the proper comparisons.
Fixes: 637bc8bbe6 ("inet: reset tb->fastreuseport when adding a reuseport sk")
Reported-and-tested-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We need to set the tb->fast_sk_family properly so we can use the proper
comparison function for all subsequent reuseport bind requests.
Fixes: 637bc8bbe6 ("inet: reset tb->fastreuseport when adding a reuseport sk")
Reported-and-tested-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zerocopy skbs frags are copied when the skb is looped to a local sock.
Commit 1080e512d4 ("net: orphan frags on receive") introduced calls
to skb_orphan_frags to deliver_skb and __netif_receive_skb for this.
With msg_zerocopy, these skbs can also exist in the tx path and thus
loop from dev_queue_xmit_nit. This already calls deliver_skb in its
loop. But it does not orphan before a separate pt_prev->func().
Add the missing skb_orphan_frags_rx.
Changes
v1->v2: handle skb_orphan_frags_rx failure
Fixes: 1f8b977ab3 ("sock: enable MSG_ZEROCOPY")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Usually socket closing is delayed if there is still data available in
the send buffer to be transmitted. If a process is killed, the delay
should be avoided.
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The number of outstanding work requests is limited. If all work
requests are in use, tx processing is postponed to another scheduling
of the tx worker. Switch to a delayed worker to have a gap for tx
completion queue events before the next retry.
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
An out-of-sync condition can just be detected by the client.
If the server receives a CLC DECLINE message indicating an out-of-sync
condition for the link groups, the server must clean up the out-of-sync
link group.
There is no need for an extra third parameter in smc_clc_send_decline().
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Client link group creation always follows the server linkgroup creation.
If peer creates a new server link group, client has to create a new
client link group. If peer reuses a server link group for a new
connection, client has to reuse its client link group as well. This
patch introduces a longer delay for client link group removal to make
sure this link group still exists, once the peer decides to reuse a
server link group. This avoids out-of-sync conditions for link groups.
If already scheduled, modify the delay.
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The solicited flag is meaningful for the receive completion queue.
Ask for next work completion of any type on the send queue.
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
smc_pnet_fill_entry() uses dev_get_by_name() adding a refcount to ndev.
The following smc_pnet_enter() has to reduce the refcount if the entry
to be added exists already in the pnet table.
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
smc_netinfo_by_tcpsk() looks up the routing cache. Such a lookup requires
protection by an RCU read lock.
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The SMC receive function currently lacks a timeout check under the
condition that no data were received and no data are available. This
patch adds such a check.
Signed-off-by: Hans Wippel <hwippel@linux.vnet.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the infiniband part, SMC currently uses get_netdev which calls
dev_hold on the returned net device. However, the SMC code never calls
dev_put on that net device resulting in a wrong reference count.
This patch adds a dev_put after the usage of the net device to fix the
issue.
Signed-off-by: Hans Wippel <hwippel@linux.vnet.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 3f1ac7a700 ("net: ethtool: add new ETHTOOL_xLINKSETTINGS API")
deprecated the ethtool_cmd::transceiver field, which was fine in
premise, except that the PHY library was actually using it to report the
type of transceiver: internal or external.
Use the first word of the reserved field to put this __u8 transceiver
field back in. It is made read-only, and we don't expect the
ETHTOOL_xLINKSETTINGS API to be doing anything with this anyway, so this
is mostly for the legacy path where we do:
ethtool_get_settings()
-> dev->ethtool_ops->get_link_ksettings()
-> convert_link_ksettings_to_legacy_settings()
to have no information loss compared to the legacy get_settings API.
Fixes: 3f1ac7a700 ("net: ethtool: add new ETHTOOL_xLINKSETTINGS API")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes: c15ab236d6 ("net/sched: Change cls_flower to use IDR")
Cc: Chris Mi <chrism@mellanox.com>
Cc: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If real-time or fair-share curves are enabled in hfsc_change_class()
class isn't inserted into rb-trees yet. Thus init_ed() and init_vf()
must be called in place of update_ed() and update_vf().
Remove isn't required because for now curves cannot be disabled.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
SKB stored in qdisc->gso_skb also counted into backlog.
Some qdiscs don't reset backlog to zero in ->reset(),
for example sfq just dequeue and free all queued skb.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Fixes: 2ccccf5fb4 ("net_sched: update hierarchical backlog too")
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains two Netfilter fixes for your net tree,
they are:
1) Fix NAt compilation with UP, from Geert Uytterhoeven.
2) Fix incorrect number of entries when dumping a set, from
Vishwanath Pai.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Since XDP's view of the packet includes the MAC header, moving the start-
of-packet with bpf_xdp_adjust_head needs to also update the offset of the
MAC header (which is relative to skb->head, not to the skb->data that was
changed).
Without this, tcpdump sees packets starting from the old MAC header rather
than the new one, at least in my tests on the loopback device.
Fixes: b5cdae3291 ("net: Generic XDP")
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The actual length of cmsg fetched in during the second loop
(i.e., kcmsg - kcmsg_base) could be different from what we
get from the first loop (i.e., kcmlen).
The main reason is that the two get_user() calls in the two
loops (i.e., get_user(ucmlen, &ucmsg->cmsg_len) and
__get_user(ucmlen, &ucmsg->cmsg_len)) could cause ucmlen
to have different values even they fetch from the same userspace
address, as user can race to change the memory content in
&ucmsg->cmsg_len across fetches.
Although in the second loop, the sanity check
if ((char *)kcmsg_base + kcmlen - (char *)kcmsg < CMSG_ALIGN(tmp))
is inplace, it only ensures that the cmsg fetched in during the
second loop does not exceed the length of kcmlen, but not
necessarily equal to kcmlen. But indicated by the assignment
kmsg->msg_controllen = kcmlen, we should enforce that.
This patch adds this additional sanity check and ensures that
what is recorded in kmsg->msg_controllen is the actual cmsg length.
Signed-off-by: Meng Xu <mengxu.gatech@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Packet socket bind operations must hold the po->bind_lock. This keeps
po->running consistent with whether the socket is actually on a ptype
list to receive packets.
fanout_add unbinds a socket and its packet_rcv/tpacket_rcv call, then
binds the fanout object to receive through packet_rcv_fanout.
Make it hold the po->bind_lock when testing po->running and rebinding.
Else, it can race with other rebind operations, such as that in
packet_set_ring from packet_rcv to tpacket_rcv. Concurrent updates
can result in a socket being added to a fanout group twice, causing
use-after-free KASAN bug reports, among others.
Reported independently by both trinity and syzkaller.
Verified that the syzkaller reproducer passes after this patch.
Fixes: dc99f60069 ("packet: Add fanout support.")
Reported-by: nixioaming <nixiaoming@huawei.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, writing into
net.ipv6.conf.all.{accept_dad,use_optimistic,optimistic_dad} has no effect.
Fix handling of these flags by:
- using the maximum of global and per-interface values for the
accept_dad flag. That is, if at least one of the two values is
non-zero, enable DAD on the interface. If at least one value is
set to 2, enable DAD and disable IPv6 operation on the interface if
MAC-based link-local address was found
- using the logical OR of global and per-interface values for the
optimistic_dad flag. If at least one of them is set to one, optimistic
duplicate address detection (RFC 4429) is enabled on the interface
- using the logical OR of global and per-interface values for the
use_optimistic flag. If at least one of them is set to one,
optimistic addresses won't be marked as deprecated during source address
selection on the interface.
While at it, as we're modifying the prototype for ipv6_use_optimistic_addr(),
drop inline, and let the compiler decide.
Fixes: 7fd2561e4e ("net: ipv6: Add a sysctl to make optimistic addresses useful candidates")
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit f784ad3d79 ("ipv6: do not send RTM_DELADDR for tentative
addresses") incorrectly assumes that no RTM_NEWADDR are sent for
addresses in tentative state, as this does happen for the standard
IPv6 use-case of DAD failure, see the call to ipv6_ifa_notify() in
addconf_dad_stop(). So as a result of this change, no RTM_DELADDR is
sent after DAD failure for a link-local when strict DAD (accept_dad=2)
is configured, or on the next admin down in other cases. The absence
of this notification breaks backwards compatibility and causes problems
after DAD failure if this notification was being relied on. The
solution is to allow RTM_DELADDR to still be sent after DAD failure.
Fixes: f784ad3d79 ("ipv6: do not send RTM_DELADDR for tentative addresses")
Signed-off-by: Mike Manning <mmanning@brocade.com>
Cc: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 109980b894 ("bpf: don't select potentially stale
ri->map from buggy xdp progs") passed the pointer to the prog
itself to be loaded into r4 prior on bpf_redirect_map() helper
call, so that we can store the owner into ri->map_owner out of
the helper.
Issue with that is that the actual address of the prog is still
subject to change when subsequent rewrites occur that require
slow path in bpf_prog_realloc() to alloc more memory, e.g. from
patching inlining helper functions or constant blinding. Thus,
we really need to take prog->aux as the address we're holding,
which also works with prog clones as they share the same aux
object.
Instead of then fetching aux->prog during runtime, which could
potentially incur cache misses due to false sharing, we are
going to just use aux for comparison on the map owner. This
will also keep the patchlet of the same size, and later check
in xdp_map_invalid() only accesses read-only aux pointer from
the prog, it's also in the same cacheline already from prior
access when calling bpf_func.
Fixes: 109980b894 ("bpf: don't select potentially stale ri->map from buggy xdp progs")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Our recent change exposed a bug in TCP Fastopen Client that syzkaller
found right away [1]
When we prepare skb with SYN+DATA, we attempt to transmit it,
and we update socket state as if the transmit was a success.
In socket RTX queue we have two skbs, one with the SYN alone,
and a second one containing the DATA.
When (malicious) ACK comes in, we now complain that second one had no
skb_mstamp.
The proper fix is to make sure that if the transmit failed, we do not
pretend we sent the DATA skb, and make it our send_head.
When 3WHS completes, we can now send the DATA right away, without having
to wait for a timeout.
[1]
WARNING: CPU: 0 PID: 100189 at net/ipv4/tcp_input.c:3117 tcp_clean_rtx_queue+0x2057/0x2ab0 net/ipv4/tcp_input.c:3117()
WARN_ON_ONCE(last_ackt == 0);
Modules linked in:
CPU: 0 PID: 100189 Comm: syz-executor1 Not tainted
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
0000000000000000 ffff8800b35cb1d8 ffffffff81cad00d 0000000000000000
ffffffff828a4347 ffff88009f86c080 ffffffff8316eb20 0000000000000d7f
ffff8800b35cb220 ffffffff812c33c2 ffff8800baad2440 00000009d46575c0
Call Trace:
[<ffffffff81cad00d>] __dump_stack
[<ffffffff81cad00d>] dump_stack+0xc1/0x124
[<ffffffff812c33c2>] warn_slowpath_common+0xe2/0x150
[<ffffffff812c361e>] warn_slowpath_null+0x2e/0x40
[<ffffffff828a4347>] tcp_clean_rtx_queue+0x2057/0x2ab0 n
[<ffffffff828ae6fd>] tcp_ack+0x151d/0x3930
[<ffffffff828baa09>] tcp_rcv_state_process+0x1c69/0x4fd0
[<ffffffff828efb7f>] tcp_v4_do_rcv+0x54f/0x7c0
[<ffffffff8258aacb>] sk_backlog_rcv
[<ffffffff8258aacb>] __release_sock+0x12b/0x3a0
[<ffffffff8258ad9e>] release_sock+0x5e/0x1c0
[<ffffffff8294a785>] inet_wait_for_connect
[<ffffffff8294a785>] __inet_stream_connect+0x545/0xc50
[<ffffffff82886f08>] tcp_sendmsg_fastopen
[<ffffffff82886f08>] tcp_sendmsg+0x2298/0x35a0
[<ffffffff82952515>] inet_sendmsg+0xe5/0x520
[<ffffffff8257152f>] sock_sendmsg_nosec
[<ffffffff8257152f>] sock_sendmsg+0xcf/0x110
Fixes: 8c72c65b42 ("tcp: update skb->skb_mstamp more carefully")
Fixes: 783237e8da ("net-tcp: Fast Open client - sending SYN-data")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts most of commit f53b7665c8 ("libceph: upmap semantic
changes").
We need to prevent duplicates in the final result. For example, we
can currently take
[1,2,3] and apply [(1,2)] and get [2,2,3]
or
[1,2,3] and apply [(3,2)] and get [1,2,2]
The rest of the system is not prepared to handle duplicates in the
result set like this.
The reverted piece was intended to allow
[1,2,3] and [(1,2),(2,1)] to get [2,1,3]
to reorder primaries. First, this bidirectional swap is hard to
implement in a way that also prevents dups. For example, [1,2,3] and
[(1,4),(2,3),(3,4)] would give [4,3,4] but would we just drop the last
step we'd have [4,3,3] which is also invalid, etc. Simpler to just not
handle bidirectional swaps. In practice, they are not needed: if you
just want to choose a different primary then use primary_affinity, or
pg_upmap (not pg_upmap_items).
Cc: stable@vger.kernel.org # 4.13
Link: http://tracker.ceph.com/issues/21410
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
to crash the kernel with malformed netlink messages.
-----BEGIN PGP SIGNATURE-----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=097A
-----END PGP SIGNATURE-----
Merge tag 'mac80211-for-davem-2017-11-19' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
Just two netlink fixes, both allowing privileged users
to crash the kernel with malformed netlink messages.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
remove tcp_may_send_now and tcp_snd_test that are no longer used
Fixes: 840a3cbe89 ("tcp: remove forward retransmit feature")
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
this script, edited from Linux Advanced Routing and Traffic Control guide
tc q a dev en0 root handle 1: htb default a
tc c a dev en0 parent 1: classid 1:1 htb rate 6mbit burst 15k
tc c a dev en0 parent 1:1 classid 1:a htb rate 5mbit ceil 6mbit burst 15k
tc c a dev en0 parent 1:1 classid 1:b htb rate 1mbit ceil 6mbit burst 15k
tc f a dev en0 parent 1:0 prio 1 $clsname $clsargs classid 1:b
ping $address -c1
tc -s c s dev en0
classifies traffic to 1:b or 1:a, depending on whether the packet matches
or not the pattern $clsargs of filter $clsname. However, when $clsname is
'matchall', a systematic crash can be observed in htb_classify(). HTB and
classful qdiscs don't assign initial value to struct tcf_result, but then
they expect it to contain valid values after filters have been run. Thus,
current 'matchall' ignores the TCA_MATCHALL_CLASSID attribute, configured
by user, and makes HTB (and classful qdiscs) dereference random pointers.
By assigning head->res to *res in mall_classify(), before the actions are
invoked, we fix this crash and enable TCA_MATCHALL_CLASSID functionality,
that had no effect on 'matchall' classifier since its first introduction.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1460213
Reported-by: Jiri Benc <jbenc@redhat.com>
Fixes: b87f7936a9 ("net/sched: introduce Match-all classifier")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Yotam Gigi <yotamg@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If ipv6 has been disabled from cmdline since kernel started, it makes
no sense to allow users to create any ip6 tunnel. Otherwise, it could
some potential problem.
Jianlin found a kernel crash caused by this in ip6_gre when he set
ipv6.disable=1 in grub:
[ 209.588865] Unable to handle kernel paging request for data at address 0x00000080
[ 209.588872] Faulting instruction address: 0xc000000000a3aa6c
[ 209.588879] Oops: Kernel access of bad area, sig: 11 [#1]
[ 209.589062] NIP [c000000000a3aa6c] fib_rules_lookup+0x4c/0x260
[ 209.589071] LR [c000000000b9ad90] fib6_rule_lookup+0x50/0xb0
[ 209.589076] Call Trace:
[ 209.589097] fib6_rule_lookup+0x50/0xb0
[ 209.589106] rt6_lookup+0xc4/0x110
[ 209.589116] ip6gre_tnl_link_config+0x214/0x2f0 [ip6_gre]
[ 209.589125] ip6gre_newlink+0x138/0x3a0 [ip6_gre]
[ 209.589134] rtnl_newlink+0x798/0xb80
[ 209.589142] rtnetlink_rcv_msg+0xec/0x390
[ 209.589151] netlink_rcv_skb+0x138/0x150
[ 209.589159] rtnetlink_rcv+0x48/0x70
[ 209.589169] netlink_unicast+0x538/0x640
[ 209.589175] netlink_sendmsg+0x40c/0x480
[ 209.589184] ___sys_sendmsg+0x384/0x4e0
[ 209.589194] SyS_sendmsg+0xd4/0x140
[ 209.589201] SyS_socketcall+0x3e0/0x4f0
[ 209.589209] system_call+0x38/0xe0
This patch is to return -EOPNOTSUPP in ip6_tunnel_init if ipv6 has been
disabled from cmdline.
Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now in ip6gre_header before packing the ipv6 header, it skb_push t->hlen
which only includes encap_hlen + tun_hlen. It means greh and inner header
would be over written by ipv6 stuff and ipv6h might have no chance to set
up.
Jianlin found this issue when using remote any on ip6_gre, the packets he
captured on gre dev are truncated:
22:50:26.210866 Out ethertype IPv6 (0x86dd), length 120: truncated-ip6 -\
8128 bytes missing!(flowlabel 0x92f40, hlim 0, next-header Options (0) \
payload length: 8192) ::1:2000:0 > ::1:0:86dd: HBH [trunc] ip-proto-128 \
8184
It should also skb_push ipv6hdr so that ipv6h points to the right position
to set ipv6 stuff up.
This patch is to skb_push hlen + sizeof(*ipv6h) and also fix some indents
in ip6gre_header.
Fixes: c12b395a46 ("gre: Support GRE over IPv6")
Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If TX rates are specified during mesh join, the channel must
also be specified. Check the channel pointer to avoid a null
pointer dereference if it isn't.
Reported-by: Jouni Malinen <j@w1.fi>
Fixes: 8564e38206 ("cfg80211: add checks for beacon rate, extend to mesh")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
While trying an ESP transport mode encryption for UDPv6 packets of
datagram size 1436 with MTU 1500, checksum error was observed in
the secondary fragment.
This error occurs due to the UDP payload checksum being missed out
when computing the full checksum for these packets in
udp6_hwcsum_outgoing().
Fixes: d39d938c82 ("ipv6: Introduce udpv6_send_skb()")
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simple testcase:
$ ipset create test hash:ip timeout 5
$ ipset add test 1.2.3.4
$ ipset add test 1.2.2.2
$ sleep 5
$ ipset l
Name: test
Type: hash:ip
Revision: 5
Header: family inet hashsize 1024 maxelem 65536 timeout 5
Size in memory: 296
References: 0
Number of entries: 2
Members:
We return "Number of entries: 2" but no members are listed. That is
because mtype_list runs "ip_set_timeout_expired" and does not list the
expired entries, but set->elements is never upated (until mtype_gc
cleans it up later).
Reviewed-by: Joshua Hunt <johunt@akamai.com>
Signed-off-by: Vishwanath Pai <vpai@akamai.com>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
If no spinlock debugging options (CONFIG_GENERIC_LOCKBREAK,
CONFIG_DEBUG_SPINLOCK, CONFIG_DEBUG_LOCK_ALLOC) are enabled on a UP
platform (e.g. m68k defconfig), arch_spinlock_t is an empty struct,
hence using ARRAY_SIZE(nf_nat_locks) causes a division by zero:
net/netfilter/nf_nat_core.c: In function ‘nf_nat_setup_info’:
net/netfilter/nf_nat_core.c:432: warning: division by zero
net/netfilter/nf_nat_core.c: In function ‘__nf_nat_cleanup_conntrack’:
net/netfilter/nf_nat_core.c:535: warning: division by zero
net/netfilter/nf_nat_core.c:537: warning: division by zero
net/netfilter/nf_nat_core.c: In function ‘nf_nat_init’:
net/netfilter/nf_nat_core.c:810: warning: division by zero
net/netfilter/nf_nat_core.c:811: warning: division by zero
net/netfilter/nf_nat_core.c:824: warning: division by zero
Fix this by using the CONNTRACK_LOCKS definition instead.
Suggested-by: Florian Westphal <fw@strlen.de>
Fixes: 8073e960a0 ("netfilter: nat: use keyed locks")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Pull networking fixes from David Miller:
1) Fix hotplug deadlock in hv_netvsc, from Stephen Hemminger.
2) Fix double-free in rmnet driver, from Dan Carpenter.
3) INET connection socket layer can double put request sockets, fix
from Eric Dumazet.
4) Don't match collect metadata-mode tunnels if the device is down,
from Haishuang Yan.
5) Do not perform TSO6/GSO on ipv6 packets with extensions headers in
be2net driver, from Suresh Reddy.
6) Fix scaling error in gen_estimator, from Eric Dumazet.
7) Fix 64-bit statistics deadlock in systemport driver, from Florian
Fainelli.
8) Fix use-after-free in sctp_sock_dump, from Xin Long.
9) Reject invalid BPF_END instructions in verifier, from Edward Cree.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (43 commits)
mlxsw: spectrum_router: Only handle IPv4 and IPv6 events
Documentation: link in networking docs
tcp: fix data delivery rate
bpf/verifier: reject BPF_ALU64|BPF_END
sctp: do not mark sk dumped when inet_sctp_diag_fill returns err
sctp: fix an use-after-free issue in sctp_sock_dump
netvsc: increase default receive buffer size
tcp: update skb->skb_mstamp more carefully
net: ipv4: fix l3slave check for index returned in IP_PKTINFO
net: smsc911x: Quieten netif during suspend
net: systemport: Fix 64-bit stats deadlock
net: vrf: avoid gcc-4.6 warning
qed: remove unnecessary call to memset
tg3: clean up redundant initialization of tnapi
tls: make tls_sw_free_resources static
sctp: potential read out of bounds in sctp_ulpevent_type_enabled()
MAINTAINERS: review Renesas DT bindings as well
net_sched: gen_estimator: fix scaling error in bytes/packets samples
nfp: wait for the NSP resource to appear on boot
nfp: wait for board state before talking to the NSP
...
Now skb->mstamp_skb is updated later, we also need to call
tcp_rate_skb_sent() after the update is done.
Fixes: 8c72c65b42 ("tcp: update skb->skb_mstamp more carefully")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
sctp_diag would not actually dump out sk/asoc if inet_sctp_diag_fill
returns err, in which case it shouldn't mark sk dumped by setting
cb->args[3] as 1 in sctp_sock_dump().
Otherwise, it could cause some asocs to have no parent's sk dumped
in 'ss --sctp'.
So this patch is to not set cb->args[3] when inet_sctp_diag_fill()
returns err in sctp_sock_dump().
Fixes: 8f840e47f1 ("sctp: add the sctp_diag.c file")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 86fdb3448c ("sctp: ensure ep is not destroyed before doing the
dump") tried to fix an use-after-free issue by checking !sctp_sk(sk)->ep
with holding sock and sock lock.
But Paolo noticed that endpoint could be destroyed in sctp_rcv without
sock lock protection. It means the use-after-free issue still could be
triggered when sctp_rcv put and destroy ep after sctp_sock_dump checks
!ep, although it's pretty hard to reproduce.
I could reproduce it by mdelay in sctp_rcv while msleep in sctp_close
and sctp_sock_dump long time.
This patch is to add another param cb_done to sctp_for_each_transport
and dump ep->assocs with holding tsp after jumping out of transport's
traversal in it to avoid this issue.
It can also improve sctp diag dump to make it run faster, as no need
to save sk into cb->args[5] and keep calling sctp_for_each_transport
any more.
This patch is also to use int * instead of int for the pos argument
in sctp_for_each_transport, which could make postion increment only
in sctp_for_each_transport and no need to keep changing cb->args[2]
in sctp_sock_filter and sctp_sock_dump any more.
Fixes: 86fdb3448c ("sctp: ensure ep is not destroyed before doing the dump")
Reported-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
liujian reported a problem in TCP_USER_TIMEOUT processing with a patch
in tcp_probe_timer() :
https://www.spinics.net/lists/netdev/msg454496.html
After investigations, the root cause of the problem is that we update
skb->skb_mstamp of skbs in write queue, even if the attempt to send a
clone or copy of it failed. One reason being a routing problem.
This patch prevents this, solving liujian issue.
It also removes a potential RTT miscalculation, since
__tcp_retransmit_skb() is not OR-ing TCP_SKB_CB(skb)->sacked with
TCPCB_EVER_RETRANS if a failure happens, but skb->skb_mstamp has
been changed.
A future ACK would then lead to a very small RTT sample and min_rtt
would then be lowered to this too small value.
Tested:
# cat user_timeout.pkt
--local_ip=192.168.102.64
0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
+0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
+0 bind(3, ..., ...) = 0
+0 listen(3, 1) = 0
+0 `ifconfig tun0 192.168.102.64/16; ip ro add 192.0.2.1 dev tun0`
+0 < S 0:0(0) win 0 <mss 1460>
+0 > S. 0:0(0) ack 1 <mss 1460>
+.1 < . 1:1(0) ack 1 win 65530
+0 accept(3, ..., ...) = 4
+0 setsockopt(4, SOL_TCP, TCP_USER_TIMEOUT, [3000], 4) = 0
+0 write(4, ..., 24) = 24
+0 > P. 1:25(24) ack 1 win 29200
+.1 < . 1:1(0) ack 25 win 65530
//change the ipaddress
+1 `ifconfig tun0 192.168.0.10/16`
+1 write(4, ..., 24) = 24
+1 write(4, ..., 24) = 24
+1 write(4, ..., 24) = 24
+1 write(4, ..., 24) = 24
+0 `ifconfig tun0 192.168.102.64/16`
+0 < . 1:2(1) ack 25 win 65530
+0 `ifconfig tun0 192.168.0.10/16`
+3 write(4, ..., 24) = -1
# ./packetdrill user_timeout.pkt
Signed-off-by: Eric Dumazet <edumazet@googl.com>
Reported-by: liujian <liujian56@huawei.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
rt_iif is only set to the actual egress device for the output path. The
recent change to consider the l3slave flag when returning IP_PKTINFO
works for local traffic (the correct device index is returned), but it
broke the more typical use case of packets received from a remote host
always returning the VRF index rather than the original ingress device.
Update the fixup to consider l3slave and rt_iif actually getting set.
Fixes: 1dfa76390b ("net: ipv4: add check for l3slave for index returned in IP_PKTINFO")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
nl80211_set_rekey_data() does not check if the required attributes
NL80211_REKEY_DATA_{REPLAY_CTR,KEK,KCK} are present when processing
NL80211_CMD_SET_REKEY_OFFLOAD request. This request can be issued by
users with CAP_NET_ADMIN privilege and may result in NULL dereference
and a system crash. Add a check for the required attributes presence.
This patch is based on the patch by bo Zhang.
This fixes CVE-2017-12153.
References: https://bugzilla.redhat.com/show_bug.cgi?id=1491046
Fixes: e5497d766a ("cfg80211/nl80211: support GTK rekey offload")
Cc: <stable@vger.kernel.org> # v3.1-rc1
Reported-by: bo Zhang <zhangbo5891001@gmail.com>
Signed-off-by: Vladis Dronov <vdronov@redhat.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Pull more set_fs removal from Al Viro:
"Christoph's 'use kernel_read and friends rather than open-coding
set_fs()' series"
* 'work.set_fs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: unexport vfs_readv and vfs_writev
fs: unexport vfs_read and vfs_write
fs: unexport __vfs_read/__vfs_write
lustre: switch to kernel_write
gadget/f_mass_storage: stop messing with the address limit
mconsole: switch to kernel_read
btrfs: switch write_buf to kernel_write
net/9p: switch p9_fd_read to kernel_write
mm/nommu: switch do_mmap_private to kernel_read
serial2002: switch serial2002_tty_write to kernel_{read/write}
fs: make the buf argument to __kernel_write a void pointer
fs: fix kernel_write prototype
fs: fix kernel_read prototype
fs: move kernel_read to fs/read_write.c
fs: move kernel_write to fs/read_write.c
autofs4: switch autofs4_write to __kernel_write
ashmem: switch to ->read_iter
Make the needlessly global function tls_sw_free_resources static to fix
a gcc/sparse warning.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Denys reported wrong rate estimations with HTB classes.
It appears the bug was added in linux-4.10, since my tests
where using intervals of one second only.
HTB using 4 sec default rate estimators, reported rates
were 4x higher.
We need to properly scale the bytes/packets samples before
integrating them in EWMA.
Tested:
echo 1 >/sys/module/sch_htb/parameters/htb_rate_est
Setup HTB with one class with a rate/cail of 5Gbit
Generate traffic on this class
tc -s -d cl sh dev eth0 classid 7002:11
class htb 7002:11 parent 7002:1 prio 5 quantum 200000 rate 5Gbit ceil
5Gbit linklayer ethernet burst 80000b/1 mpu 0b cburst 80000b/1 mpu 0b
level 0 rate_handle 1
Sent 1488215421648 bytes 982969243 pkt (dropped 0, overlimits 0
requeues 0)
rate 5Gbit 412814pps backlog 136260b 2p requeues 0
TCP pkts/rtx 982969327/45 bytes 1488215557414/68130
lended: 22732826 borrowed: 0 giants: 0
tokens: -1684 ctokens: -1684
Fixes: 1c0d32fde5 ("net_sched: gen_estimator: complete rewrite of rate estimators")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Denys Fedoryshchenko <nuclearcat@nuclearcat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Recent commit d7fb60b9ca ("net_sched: get rid of tcfa_rcu") removed
freeing in call_rcu, which changed already existing hard-to-hit
race condition into 100% hit:
[ 598.599825] BUG: unable to handle kernel NULL pointer dereference at 0000000000000030
[ 598.607782] IP: tcf_action_destroy+0xc0/0x140
Or:
[ 40.858924] BUG: unable to handle kernel NULL pointer dereference at 0000000000000030
[ 40.862840] IP: tcf_generic_walker+0x534/0x820
Fix this by storing the ops and use them directly for module_put call.
Fixes: a85a970af2 ("net_sched: move tc_action into tcf_common")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In collect_md mode, if the tun dev is down, it still can call
__ip6_tnl_rcv to receive on packets, and the rx statistics increase
improperly.
When the md tunnel is down, it's not neccessary to increase RX drops
for the tunnel device, packets would be recieved on fallback tunnel,
and the RX drops on fallback device will be increased as expected.
Fixes: 8d79266bc4 ("ip6_tunnel: add collect_md mode to IPv6 tunnels")
Cc: Alexei Starovoitov <ast@fb.com>
Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In collect_md mode, if the tun dev is down, it still can call
ip_tunnel_rcv to receive on packets, and the rx statistics increase
improperly.
When the md tunnel is down, it's not neccessary to increase RX drops
for the tunnel device, packets would be recieved on fallback tunnel,
and the RX drops on fallback device will be increased as expected.
Fixes: 2e15ea390e ("ip_gre: Add support to collect tunnel metadata.")
Cc: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
As pointed out by Jiri, there is still a race condition between
tcf_block_put() and tcf_chain_destroy() in a RCU callback. There
is no way to make it correct without proper locking or synchronization,
because both operate on a shared list.
Locking is hard, because the only lock we can pick here is a spinlock,
however, in tc_dump_tfilter() we iterate this list with a sleeping
function called (tcf_chain_dump()), which makes using a lock to protect
chain_list almost impossible.
Jiri suggested the idea of holding a refcnt before flushing, this works
because it guarantees us there would be no parallel tcf_chain_destroy()
during the loop, therefore the race condition is gone. But we have to
be very careful with proper synchronization with RCU callbacks.
Suggested-by: Jiri Pirko <jiri@mellanox.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixes the following ugliness of tc filter chain refcnt:
a) tp proto should hold a refcnt to the chain too. This significantly
simplifies the logic.
b) Chain 0 is no longer special, it is created with refcnt=1 like any
other chains. All the ugliness in tcf_chain_put() can be gone!
c) No need to handle the flushing oddly, because block still holds
chain 0, it can not be released, this guarantees block is the last
user.
d) The race condition with RCU callbacks is easier to handle with just
a rcu_barrier(). Much easier to understand, nothing to hide. Thanks
to the previous patch. Please see also the comments in code.
e) Make the code understandable by humans, much less error-prone.
Fixes: 744a4cf63e ("net: sched: fix use after free when tcf_chain_destroy is called multiple times")
Fixes: 5bc1701881 ("net: sched: introduce multichain support for filters")
Cc: Jiri Pirko <jiri@mellanox.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
gen estimator has been rewritten in commit 1c0d32fde5
("net_sched: gen_estimator: complete rewrite of rate estimators"),
the caller is no longer needed to wait for a grace period.
So this patch gets rid of it.
This also completely closes a race condition between action free
path and filter chain add/remove path for the following patch.
Because otherwise the nested RCU callback can't be caught by
rcu_barrier().
Please see also the comments in code.
Cc: Jiri Pirko <jiri@mellanox.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
All other error handling paths in this function go through the 'error'
label. This one should do the same.
Fixes: 9cc9a5cb17 ("datapath: Avoid using stack larger than 1024.")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
* a large series of fixes and improvements to the snapshot-handling
code (Zheng Yan)
* individual read/write OSD requests passed down to libceph are now
limited to 16M in size to avoid hitting OSD-side limits (Zheng Yan)
* encode MStatfs v2 message to allow for more accurate space usage
reporting (Douglas Fuller)
* switch to the new writeback error tracking infrastructure (Jeff
Layton)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJZuAC0AAoJEEp/3jgCEfOLb14H/REYq4fDDkUa70L4leKWWdCa
n71ipkKeoorfivts71iOtGMJfK+Z6ax+dq1PvBWMy6PtzXS/+2B+t2XwILvLiwWH
h87i44bY68aLWRTSusgTfB+I7gyVrWN0WMLznZ5rfM9XuyPv+RPyJYh3EhxWI5+U
2kOHFEc+cPL6mAshGmB8lIzKOWTfmBiw28ulICwlcazm79hh39aNBQE546lS8gA3
kXuJ55odojPgXOYh+vs60raIBnm6flek1jLxBGYG3MU4gv0VVWOyW0eWeuqW+EcR
6dVYlzg1xGlPp+vRmDZQuv/E2MafBxdcil/RrdLeqcx/Hf1KJBzcLgUzIMbnOAI=
=YDZP
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-4.14-rc1' of git://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
"The highlights include:
- a large series of fixes and improvements to the snapshot-handling
code (Zheng Yan)
- individual read/write OSD requests passed down to libceph are now
limited to 16M in size to avoid hitting OSD-side limits (Zheng Yan)
- encode MStatfs v2 message to allow for more accurate space usage
reporting (Douglas Fuller)
- switch to the new writeback error tracking infrastructure (Jeff
Layton)"
* tag 'ceph-for-4.14-rc1' of git://github.com/ceph/ceph-client: (35 commits)
ceph: stop on-going cached readdir if mds revokes FILE_SHARED cap
ceph: wait on writeback after writing snapshot data
ceph: fix capsnap dirty pages accounting
ceph: ignore wbc->range_{start,end} when write back snapshot data
ceph: fix "range cyclic" mode writepages
ceph: cleanup local variables in ceph_writepages_start()
ceph: optimize pagevec iterating in ceph_writepages_start()
ceph: make writepage_nounlock() invalidate page that beyonds EOF
ceph: properly get capsnap's size in get_oldest_context()
ceph: remove stale check in ceph_invalidatepage()
ceph: queue cap snap only when snap realm's context changes
ceph: handle race between vmtruncate and queuing cap snap
ceph: fix message order check in handle_cap_export()
ceph: fix NULL pointer dereference in ceph_flush_snaps()
ceph: adjust 36 checks for NULL pointers
ceph: delete an unnecessary return statement in update_dentry_lease()
ceph: ENOMEM pr_err in __get_or_create_frag() is redundant
ceph: check negative offsets in ceph_llseek()
ceph: more accurate statfs
ceph: properly set snap follows for cap reconnect
...
Hightlights include:
Stable bugfixes:
- Fix mirror allocation in the writeback code to avoid a use after free
- Fix the O_DSYNC writes to use the correct byte range
- Fix 2 use after free issues in the I/O code
Features:
- Writeback fixes to split up the inode->i_lock in order to reduce contention
- RPC client receive fixes to reduce the amount of time the
xprt->transport_lock is held when receiving data from a socket into am
XDR buffer.
- Ditto fixes to reduce contention between call side users of the rdma
rb_lock, and its use in rpcrdma_reply_handler.
- Re-arrange rdma stats to reduce false cacheline sharing.
- Various rdma cleanups and optimisations.
- Refactor the NFSv4.1 exchange id code and clean up the code.
- Const-ify all instances of struct rpc_xprt_ops
Bugfixes:
- Fix the NFSv2 'sec=' mount option.
- NFSv4.1: don't use machine credentials for CLOSE when using 'sec=sys'
- Fix the NFSv3 GRANT callback when the port changes on the server.
- Fix livelock issues with COMMIT
- NFSv4: Use correct inode in _nfs4_opendata_to_nfs4_state() when doing
and NFSv4.1 open by filehandle.
-----BEGIN PGP SIGNATURE-----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=1Ssl
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-4.14-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client updates from Trond Myklebust:
"Hightlights include:
Stable bugfixes:
- Fix mirror allocation in the writeback code to avoid a use after
free
- Fix the O_DSYNC writes to use the correct byte range
- Fix 2 use after free issues in the I/O code
Features:
- Writeback fixes to split up the inode->i_lock in order to reduce
contention
- RPC client receive fixes to reduce the amount of time the
xprt->transport_lock is held when receiving data from a socket into
am XDR buffer.
- Ditto fixes to reduce contention between call side users of the
rdma rb_lock, and its use in rpcrdma_reply_handler.
- Re-arrange rdma stats to reduce false cacheline sharing.
- Various rdma cleanups and optimisations.
- Refactor the NFSv4.1 exchange id code and clean up the code.
- Const-ify all instances of struct rpc_xprt_ops
Bugfixes:
- Fix the NFSv2 'sec=' mount option.
- NFSv4.1: don't use machine credentials for CLOSE when using
'sec=sys'
- Fix the NFSv3 GRANT callback when the port changes on the server.
- Fix livelock issues with COMMIT
- NFSv4: Use correct inode in _nfs4_opendata_to_nfs4_state() when
doing and NFSv4.1 open by filehandle"
* tag 'nfs-for-4.14-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (69 commits)
NFS: Count the bytes of skipped subrequests in nfs_lock_and_join_requests()
NFS: Don't hold the group lock when calling nfs_release_request()
NFS: Remove pnfs_generic_transfer_commit_list()
NFS: nfs_lock_and_join_requests and nfs_scan_commit_list can deadlock
NFS: Fix 2 use after free issues in the I/O code
NFS: Sync the correct byte range during synchronous writes
lockd: Delete an error message for a failed memory allocation in reclaimer()
NFS: remove jiffies field from access cache
NFS: flush data when locking a file to ensure cache coherence for mmap.
SUNRPC: remove some dead code.
NFS: don't expect errors from mempool_alloc().
xprtrdma: Use xprt_pin_rqst in rpcrdma_reply_handler
xprtrdma: Re-arrange struct rx_stats
NFS: Fix NFSv2 security settings
NFSv4.1: don't use machine credentials for CLOSE when using 'sec=sys'
SUNRPC: ECONNREFUSED should cause a rebind.
NFS: Remove unused parameter gfp_flags from nfs_pageio_init()
NFSv4: Fix up mirror allocation
SUNRPC: Add a separate spinlock to protect the RPC request receive list
SUNRPC: Cleanup xs_tcp_read_common()
...
Fixes sparse warning about pointer in gen_handle:
net/sched/cls_rsvp.h:392:40: warning: Using plain integer as NULL pointer
Fixes: 8113c09567 ("net_sched: use void pointer for filter handle")
Signed-off-by: Josh Hunt <johunt@akamai.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As seg6_validate_srh() already checks that the Routing Header type is
correct, it is not necessary to do it again in get_srh().
Fixes: 5829d70b ("ipv6: sr: fix get_srh() to comply with IPv6 standard "RFC 8200")
Signed-off-by: David Lebrun <dlebrun@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Using bpf_redirect_map is allowed for generic XDP programs, but the
appropriate map lookup was never performed in xdp_do_generic_redirect().
Instead the map-index is directly used as the ifindex. For the
xdp_redirect_map sample in SKB-mode '-S', this resulted in trying
sending on ifindex 0 which isn't valid, resulting in getting SKB
packets dropped. Thus, the reported performance numbers are wrong in
commit 24251c2647 ("samples/bpf: add option for native and skb mode
for redirect apps") for the 'xdp_redirect_map -S' case.
Before commit 109980b894 ("bpf: don't select potentially stale
ri->map from buggy xdp progs") it could crash the kernel. Like this
commit also check that the map_owner owner is correct before
dereferencing the map pointer. But make sure that this API misusage
can be caught by a tracepoint. Thus, allowing userspace via
tracepoints to detect misbehaving bpf_progs.
Fixes: 6103aa96ec ("net: implement XDP_REDIRECT for xdp generic")
Fixes: 24251c2647 ("samples/bpf: add option for native and skb mode for redirect apps")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Reset the offload device at the xfrm_state if the device was
not able to offload the state. Otherwise we drop the device
refcount twice.
Fixes: d77e38e612 ("xfrm: Add an IPsec hardware offloading API")
Reported-by: Shannon Nelson <shannon.nelson@oracle.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
When we off load a SA, it gets pushed to the NIC before we can
add it. In case of a failure, we don't delete this SA from the
NIC. Fix this by calling xfrm_dev_state_delete on failure.
Fixes: d77e38e612 ("xfrm: Add an IPsec hardware offloading API")
Reported-by: Shannon Nelson <shannon.nelson@oracle.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Validate the output buffer length for L2CAP config requests and responses
to avoid overflowing the stack buffer used for building the option blocks.
Cc: stable@vger.kernel.org
Signed-off-by: Ben Seri <ben@armis.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
and a small cleanup to our xdr encoding.
-----BEGIN PGP SIGNATURE-----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=E3UQ
-----END PGP SIGNATURE-----
Merge tag 'nfsd-4.14' of git://linux-nfs.org/~bfields/linux
Pull nfsd updates from Bruce Fields:
"More RDMA work and some op-structure constification from Chuck Lever,
and a small cleanup to our xdr encoding"
* tag 'nfsd-4.14' of git://linux-nfs.org/~bfields/linux:
svcrdma: Estimate Send Queue depth properly
rdma core: Add rdma_rw_mr_payload()
svcrdma: Limit RQ depth
svcrdma: Populate tail iovec when receiving
nfsd: Incoming xdr_bufs may have content in tail buffer
svcrdma: Clean up svc_rdma_build_read_chunk()
sunrpc: Const-ify struct sv_serv_ops
nfsd: Const-ify NFSv4 encoding and decoding ops arrays
sunrpc: Const-ify instances of struct svc_xprt_ops
nfsd4: individual encoders no longer see error cases
nfsd4: skip encoder in trivial error cases
nfsd4: define ->op_release for compound ops
nfsd4: opdesc will be useful outside nfs4proc.c
nfsd4: move some nfsd4 op definitions to xdr4.h
Pull networking fixes from David Miller:
"The iwlwifi firmware compat fix is in here as well as some other
stuff:
1) Fix request socket leak introduced by BPF deadlock fix, from Eric
Dumazet.
2) Fix VLAN handling with TXQs in mac80211, from Johannes Berg.
3) Missing __qdisc_drop conversions in prio and qfq schedulers, from
Gao Feng.
4) Use after free in netlink nlk groups handling, from Xin Long.
5) Handle MTU update properly in ipv6 gre tunnels, from Xin Long.
6) Fix leak of ipv6 fib tables on netns teardown, from Sabrina Dubroca
with follow-on fix from Eric Dumazet.
7) Need RCU and preemption disabled during generic XDP data patch,
from John Fastabend"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (54 commits)
bpf: make error reporting in bpf_warn_invalid_xdp_action more clear
Revert "mdio_bus: Remove unneeded gpiod NULL check"
bpf: devmap, use cond_resched instead of cpu_relax
bpf: add support for sockmap detach programs
net: rcu lock and preempt disable missing around generic xdp
bpf: don't select potentially stale ri->map from buggy xdp progs
net: tulip: Constify tulip_tbl
net: ethernet: ti: netcp_core: no need in netif_napi_del
davicom: Display proper debug level up to 6
net: phy: sfp: rename dt properties to match the binding
dt-binding: net: sfp binding documentation
dt-bindings: add SFF vendor prefix
dt-bindings: net: don't confuse with generic PHY property
ip6_tunnel: fix setting hop_limit value for ipv6 tunnel
ip_tunnel: fix setting ttl and tos value in collect_md mode
ipv6: fix typo in fib6_net_exit()
tcp: fix a request socket leak
sctp: fix missing wake ups in some situations
netfilter: xt_hashlimit: fix build error caused by 64bit division
netfilter: xt_hashlimit: alloc hashtable with right size
...
Differ between illegal XDP action code and just driver
unsupported one to provide better feedback when we throw
a one-time warning here. Reason is that with 814abfabef
("xdp: add bpf_redirect helper function") not all drivers
support the new XDP return code yet and thus they will
fall into their 'default' case when checking for return
codes after program return, which then triggers a
bpf_warn_invalid_xdp_action() stating that the return
code is illegal, but from XDP perspective it's not.
I decided not to place something like a XDP_ACT_MAX define
into uapi i) given we don't have this either for all other
program types, ii) future action codes could have further
encoding there, which would render such define unsuitable
and we wouldn't be able to rip it out again, and iii) we
rarely add new action codes.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
do_xdp_generic must be called inside rcu critical section with preempt
disabled to ensure BPF programs are valid and per-cpu variables used
for redirect operations are consistent. This patch ensures this is true
and fixes the splat below.
The netif_receive_skb_internal() code path is now broken into two rcu
critical sections. I decided it was better to limit the preempt_enable/disable
block to just the xdp static key portion and the fallout is more
rcu_read_lock/unlock calls. Seems like the best option to me.
[ 607.596901] =============================
[ 607.596906] WARNING: suspicious RCU usage
[ 607.596912] 4.13.0-rc4+ #570 Not tainted
[ 607.596917] -----------------------------
[ 607.596923] net/core/dev.c:3948 suspicious rcu_dereference_check() usage!
[ 607.596927]
[ 607.596927] other info that might help us debug this:
[ 607.596927]
[ 607.596933]
[ 607.596933] rcu_scheduler_active = 2, debug_locks = 1
[ 607.596938] 2 locks held by pool/14624:
[ 607.596943] #0: (rcu_read_lock_bh){......}, at: [<ffffffff95445ffd>] ip_finish_output2+0x14d/0x890
[ 607.596973] #1: (rcu_read_lock_bh){......}, at: [<ffffffff953c8e3a>] __dev_queue_xmit+0x14a/0xfd0
[ 607.597000]
[ 607.597000] stack backtrace:
[ 607.597006] CPU: 5 PID: 14624 Comm: pool Not tainted 4.13.0-rc4+ #570
[ 607.597011] Hardware name: Dell Inc. Precision Tower 5810/0HHV7N, BIOS A17 03/01/2017
[ 607.597016] Call Trace:
[ 607.597027] dump_stack+0x67/0x92
[ 607.597040] lockdep_rcu_suspicious+0xdd/0x110
[ 607.597054] do_xdp_generic+0x313/0xa50
[ 607.597068] ? time_hardirqs_on+0x5b/0x150
[ 607.597076] ? mark_held_locks+0x6b/0xc0
[ 607.597088] ? netdev_pick_tx+0x150/0x150
[ 607.597117] netif_rx_internal+0x205/0x3f0
[ 607.597127] ? do_xdp_generic+0xa50/0xa50
[ 607.597144] ? lock_downgrade+0x2b0/0x2b0
[ 607.597158] ? __lock_is_held+0x93/0x100
[ 607.597187] netif_rx+0x119/0x190
[ 607.597202] loopback_xmit+0xfd/0x1b0
[ 607.597214] dev_hard_start_xmit+0x127/0x4e0
Fixes: d445516966 ("net: xdp: support xdp generic on virtual devices")
Fixes: b5cdae3291 ("net: Generic XDP")
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
We can potentially run into a couple of issues with the XDP
bpf_redirect_map() helper. The ri->map in the per CPU storage
can become stale in several ways, mostly due to misuse, where
we can then trigger a use after free on the map:
i) prog A is calling bpf_redirect_map(), returning XDP_REDIRECT
and running on a driver not supporting XDP_REDIRECT yet. The
ri->map on that CPU becomes stale when the XDP program is unloaded
on the driver, and a prog B loaded on a different driver which
supports XDP_REDIRECT return code. prog B would have to omit
calling to bpf_redirect_map() and just return XDP_REDIRECT, which
would then access the freed map in xdp_do_redirect() since not
cleared for that CPU.
ii) prog A is calling bpf_redirect_map(), returning a code other
than XDP_REDIRECT. prog A is then detached, which triggers release
of the map. prog B is attached which, similarly as in i), would
just return XDP_REDIRECT without having called bpf_redirect_map()
and thus be accessing the freed map in xdp_do_redirect() since
not cleared for that CPU.
iii) prog A is attached to generic XDP, calling the bpf_redirect_map()
helper and returning XDP_REDIRECT. xdp_do_generic_redirect() is
currently not handling ri->map (will be fixed by Jesper), so it's
not being reset. Later loading a e.g. native prog B which would,
say, call bpf_xdp_redirect() and then returns XDP_REDIRECT would
find in xdp_do_redirect() that a map was set and uses that causing
use after free on map access.
Fix thus needs to avoid accessing stale ri->map pointers, naive
way would be to call a BPF function from drivers that just resets
it to NULL for all XDP return codes but XDP_REDIRECT and including
XDP_REDIRECT for drivers not supporting it yet (and let ri->map
being handled in xdp_do_generic_redirect()). There is a less
intrusive way w/o letting drivers call a reset for each BPF run.
The verifier knows we're calling into bpf_xdp_redirect_map()
helper, so it can do a small insn rewrite transparent to the prog
itself in the sense that it fills R4 with a pointer to the own
bpf_prog. We have that pointer at verification time anyway and
R4 is allowed to be used as per calling convention we scratch
R0 to R5 anyway, so they become inaccessible and program cannot
read them prior to a write. Then, the helper would store the prog
pointer in the current CPUs struct redirect_info. Later in
xdp_do_*_redirect() we check whether the redirect_info's prog
pointer is the same as passed xdp_prog pointer, and if that's
the case then all good, since the prog holds a ref on the map
anyway, so it is always valid at that point in time and must
have a reference count of at least 1. If in the unlikely case
they are not equal, it means we got a stale pointer, so we clear
and bail out right there. Also do reset map and the owning prog
in bpf_xdp_redirect(), so that bpf_xdp_redirect_map() and
bpf_xdp_redirect() won't get mixed up, only the last call should
take precedence. A tc bpf_redirect() doesn't use map anywhere
yet, so no need to clear it there since never accessed in that
layer.
Note that in case the prog is released, and thus the map as
well we're still under RCU read critical section at that time
and have preemption disabled as well. Once we commit with the
__dev_map_insert_ctx() from xdp_do_redirect_map() and set the
map to ri->map_to_flush, we still wait for a xdp_do_flush_map()
to finish in devmap dismantle time once flush_needed bit is set,
so that is fine.
Fixes: 97f91a7cf0 ("bpf: add bpf_redirect_map helper routine")
Reported-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Similar to vxlan/geneve tunnel, if hop_limit is zero, it should fall
back to ip6_dst_hoplimt().
Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ttl and tos variables are declared and assigned, but are not used in
iptunnel_xmit() function.
Fixes: cfc7381b30 ("ip_tunnel: add collect_md mode to IPIP tunnel")
Cc: Alexei Starovoitov <ast@fb.com>
Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
IPv6 FIB should use FIB6_TABLE_HASHSZ, not FIB_TABLE_HASHSZ.
Fixes: ba1cc08d94 ("ipv6: fix memory leak with multiple tables during netns destruction")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While the cited commit fixed a possible deadlock, it added a leak
of the request socket, since reqsk_put() must be called if the BPF
filter decided the ACK packet must be dropped.
Fixes: d624d276d1 ("tcp: fix possible deadlock in TCP stack vs BPF filter")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter/IPVS fixes for net
The following patchset contains Netfilter/IPVS fixes for your net tree,
they are:
1) Fix SCTP connection setup when IPVS module is loaded and any scheduler
is registered, from Xin Long.
2) Don't create a SCTP connection from SCTP ABORT packets, also from
Xin Long.
3) WARN_ON() and drop packet, instead of BUG_ON() races when calling
nf_nat_setup_info(). This is specifically a longstanding problem
when br_netfilter with conntrack support is in place, patch from
Florian Westphal.
4) Avoid softlock splats via iptables-restore, also from Florian.
5) Revert NAT hashtable conversion to rhashtable, semantics of rhlist
are different from our simple NAT hashtable, this has been causing
problems in the recent Linux kernel releases. From Florian.
6) Add per-bucket spinlock for NAT hashtable, so at least we restore
one of the benefits we got from the previous rhashtable conversion.
7) Fix incorrect hashtable size in memory allocation in xt_hashlimit,
from Zhizhou Tian.
8) Fix build/link problems with hashlimit and 32-bit arches, to address
recent fallout from a new hashlimit mode, from Vishwanath Pai.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit fb586f2530 ("sctp: delay calls to sk_data_ready() as much as
possible") minimized the number of wake ups that are triggered in case
the association receives a packet with multiple data chunks on it and/or
when io_events are enabled and then commit 0970f5b366 ("sctp: signal
sk_data_ready earlier on data chunks reception") moved the wake up to as
soon as possible. It thus relies on the state machine running later to
clean the flag that the event was already generated.
The issue is that there are 2 call paths that calls
sctp_ulpq_tail_event() outside of the state machine, causing the flag to
linger and possibly omitting a needed wake up in the sequence.
One of the call paths is when enabling SCTP_SENDER_DRY_EVENTS via
setsockopt(SCTP_EVENTS), as noticed by Harald Welte. The other is when
partial reliability triggers removal of chunks from the send queue when
the application calls sendmsg().
This commit fixes it by not setting the flag in case the socket is not
owned by the user, as it won't be cleaned later. This works for
user-initiated calls and also for rx path processing.
Fixes: fb586f2530 ("sctp: delay calls to sk_data_ready() as much as possible")
Reported-by: Harald Welte <laforge@gnumonks.org>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
64bit division causes build/link errors on 32bit architectures. It
prints out error messages like:
ERROR: "__aeabi_uldivmod" [net/netfilter/xt_hashlimit.ko] undefined!
The value of avg passed through by userspace in BYTE mode cannot exceed
U32_MAX. Which means 64bit division in user2rate_bytes is unnecessary.
To fix this I have changed the type of param 'user' to u32.
Since anything greater than U32_MAX is an invalid input we error out in
hashlimit_mt_check_common() when this is the case.
Changes in v2:
Making return type as u32 would cause an overflow for small
values of 'user' (for example 2, 3 etc). To avoid this I bumped up
'r' to u64 again as well as the return type. This is OK since the
variable that stores the result is u64. We still avoid 64bit
division here since 'user' is u32.
Fixes: bea74641e3 ("netfilter: xt_hashlimit: add rate match mode")
Signed-off-by: Vishwanath Pai <vpai@akamai.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
struct xt_byteslimit_htable used hlist_head, but memory allocation is
done through sizeof(struct list_head).
Signed-off-by: Zhizhou Tian <zhizhou.tian@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
kernel test robot reported:
WARNING: CPU: 0 PID: 1244 at net/netfilter/core.c:218 __nf_hook_entries_try_shrink+0x49/0xcd
[..]
After allowing batching in nf_unregister_net_hooks its possible that an earlier
call to __nf_hook_entries_try_shrink already compacted the list.
If this happens we don't need to do anything.
Fixes: d3ad2c17b4 ("netfilter: core: batch nf_unregister_net_hooks synchronize_net calls")
Reported-by: kernel test robot <xiaolong.ye@intel.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Aaron Conole <aconole@bytheb.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
no need to serialize on a single lock, we can partition the table and
add/delete in parallel to different slots.
This restores one of the advantages that got lost with the rhlist
revert.
Cc: Ivan Babrou <ibobrik@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This reverts commit 870190a9ec.
It was not a good idea. The custom hash table was a much better
fit for this purpose.
A fast lookup is not essential, in fact for most cases there is no lookup
at all because original tuple is not taken and can be used as-is.
What needs to be fast is insertion and deletion.
rhlist removal however requires a rhlist walk.
We can have thousands of entries in such a list if source port/addresses
are reused for multiple flows, if this happens removal requests are so
expensive that deletions of a few thousand flows can take several
seconds(!).
The advantages that we got from rhashtable are:
1) table auto-sizing
2) multiple locks
1) would be nice to have, but it is not essential as we have at
most one lookup per new flow, so even a million flows in the bysource
table are not a problem compared to current deletion cost.
2) is easy to add to custom hash table.
I tried to add hlist_node to rhlist to speed up rhltable_remove but this
isn't doable without changing semantics. rhltable_remove_fast will
check that the to-be-deleted object is part of the table and that
requires a list walk that we want to avoid.
Furthermore, using hlist_node increases size of struct rhlist_head, which
in turn increases nf_conn size.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=196821
Reported-by: Ivan Babrou <ibobrik@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
There are reports about spurious softlockups during iptables-restore, a
backtrace i saw points at get_counters -- it uses a sequence lock and also
has unbounded restart loop.
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
It seems preferrable to limp along if we have a conflicting mapping,
its certainly better than a BUG().
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
fib6_net_exit only frees the main and local tables. If another table was
created with fib6_alloc_table, we leak it when the netns is destroyed.
Fix this in the same way ip_fib_net_exit cleans up tables, by walking
through the whole hashtable of fib6_table's. We can get rid of the
special cases for local and main, since they're also part of the
hashtable.
Reproducer:
ip netns add x
ip -net x -6 rule add from 6003:1::/64 table 100
ip netns del x
Reported-by: Jianlin Shi <jishi@redhat.com>
Fixes: 58f09b78b7 ("[NETNS][IPV6] ip6_fib - make it per network namespace")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
There's no reason for ipvs to create a conn for an ABORT packet
even if sysctl_sloppy_sctp is set.
This patch is to accept it without creating a conn, just as ipvs
does for tcp's RST packet.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Commit 5e26b1b3ab ("ipvs: support scheduling inverse and icmp SCTP
packets") changed to check packet type early. It introduced a side
effect: if it's not a INIT packet, ports will be set as NULL, and
the packet will be dropped later.
It caused that sctp couldn't create connection when ipvs module is
loaded and any scheduler is registered on server.
Li Shuang reproduced it by running the cmds on sctp server:
# ipvsadm -A -t 1.1.1.1:80 -s rr
# ipvsadm -D -t 1.1.1.1:80
then the server could't work any more.
This patch is to return 1 when it's not an INIT packet. It means ipvs
will accept it without creating a conn for it, just like what it does
for tcp.
Fixes: 5e26b1b3ab ("ipvs: support scheduling inverse and icmp SCTP packets")
Reported-by: Li Shuang <shuali@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
In rds_send_xmit() there is logic to batch the sends. However, if
another thread has acquired the lock and has incremented the send_gen,
it is considered a race and we yield. The code incrementing the
s_send_lock_queue_raced statistics counter did not count this event
correctly.
This commit counts the race condition correctly.
Changes from v1:
- Removed check for *someone_on_xmit()*
- Fixed incorrect indentation
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Reviewed-by: Knut Omang <knut.omang@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After commit 0ddf3fb2c4 ("udp: preserve skb->dst if required
for IP options processing") we clear the skb head state as soon
as the skb carrying them is first processed.
Since the same skb can be processed several times when MSG_PEEK
is used, we can end up lacking the required head states, and
eventually oopsing.
Fix this clearing the skb head state only when processing the
last skb reference.
Reported-by: Eric Dumazet <edumazet@google.com>
Fixes: 0ddf3fb2c4 ("udp: preserve skb->dst if required for IP options processing")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now when probessing ICMPV6_PKT_TOOBIG, ip6gre_err only subtracts the
offset of gre header from mtu info. The expected mtu of gre device
should also subtract gre header. Otherwise, the next packets still
can't be sent out.
Jianlin found this issue when using the topo:
client(ip6gre)<---->(nic1)route(nic2)<----->(ip6gre)server
and reducing nic2's mtu, then both tcp and sctp's performance with
big size data became 0.
This patch is to fix it by also subtracting grehdr (tun->tun_hlen)
from mtu info when updating gre device's mtu in ip6gre_err(). It
also needs to subtract ETH_HLEN if gre dev'type is ARPHRD_ETHER.
Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There's a memleak happening for chain 0. The thing is, chain 0 needs to
be always present, not created on demand. Therefore tcf_block_get upon
creation of block calls the tcf_chain_create function directly. The
chain is created with refcnt == 1, which is not correct in this case and
causes the memleak. So move the refcnt increment into tcf_chain_get
function even for the case when chain needs to be created.
Reported-by: Jakub Kicinski <kubakici@wp.pl>
Fixes: 5bc1701881 ("net: sched: introduce multichain support for filters")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Tested-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
* a remain-on-channel fix from Avi
* hwsim TX power fix from Beni
* null-PTR dereference with iTXQ in some rare configurations (Chunho)
* 40 MHz custom regdomain fixes (Emmanuel)
* look at right place in HT/VHT capability parsing (Igor)
* complete A-MPDU teardown properly (Ilan)
* Mesh ID Element ordering fix (Liad)
* avoid tracing warning in ht_dbg() (Sharon)
* fix print of assoc/reassoc (Simon)
* fix encrypted VLAN with iTXQ (myself)
* fix calling context of TX queue wake (myself)
* fix a deadlock with ath10k aggregation (myself)
-----BEGIN PGP SIGNATURE-----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=QYS4
-----END PGP SIGNATURE-----
Merge tag 'mac80211-for-davem-2017-09-07' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
Back from a long absence, so we have a number of things:
* a remain-on-channel fix from Avi
* hwsim TX power fix from Beni
* null-PTR dereference with iTXQ in some rare configurations (Chunho)
* 40 MHz custom regdomain fixes (Emmanuel)
* look at right place in HT/VHT capability parsing (Igor)
* complete A-MPDU teardown properly (Ilan)
* Mesh ID Element ordering fix (Liad)
* avoid tracing warning in ht_dbg() (Sharon)
* fix print of assoc/reassoc (Simon)
* fix encrypted VLAN with iTXQ (myself)
* fix calling context of TX queue wake (myself)
* fix a deadlock with ath10k aggregation (myself)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull cgroup updates from Tejun Heo:
"Several notable changes this cycle:
- Thread mode was merged. This will be used for cgroup2 support for
CPU and possibly other controllers. Unfortunately, CPU controller
cgroup2 support didn't make this pull request but most contentions
have been resolved and the support is likely to be merged before
the next merge window.
- cgroup.stat now shows the number of descendant cgroups.
- cpuset now can enable the easier-to-configure v2 behavior on v1
hierarchy"
* 'for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (21 commits)
cpuset: Allow v2 behavior in v1 cgroup
cgroup: Add mount flag to enable cpuset to use v2 behavior in v1 cgroup
cgroup: remove unneeded checks
cgroup: misc changes
cgroup: short-circuit cset_cgroup_from_root() on the default hierarchy
cgroup: re-use the parent pointer in cgroup_destroy_locked()
cgroup: add cgroup.stat interface with basic hierarchy stats
cgroup: implement hierarchy limits
cgroup: keep track of number of descent cgroups
cgroup: add comment to cgroup_enable_threaded()
cgroup: remove unnecessary empty check when enabling threaded mode
cgroup: update debug controller to print out thread mode information
cgroup: implement cgroup v2 thread support
cgroup: implement CSS_TASK_ITER_THREADED
cgroup: introduce cgroup->dom_cgrp and threaded css_set handling
cgroup: add @flags to css_task_iter_start() and implement CSS_TASK_ITER_PROCS
cgroup: reorganize cgroup.procs / task write path
cgroup: replace css_set walking populated test with testing cgrp->nr_populated_csets
cgroup: distinguish local and children populated states
cgroup: remove now unused list_head @pending in cgroup_apply_cftypes()
...
The net device is already stored in the 'net' variable, so no need to call
dev_net() again.
Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now there is no lock protecting nlk ngroups/groups' accessing in
netlink bind and getname. It's safe from nlk groups' setting in
netlink_release, but not from netlink_realloc_groups called by
netlink_setsockopt.
netlink_lock_table is needed in both netlink bind and getname when
accessing nlk groups.
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ChunYu found a netlink use-after-free issue by syzkaller:
[28448.842981] BUG: KASAN: use-after-free in __nla_put+0x37/0x40 at addr ffff8807185e2378
[28448.969918] Call Trace:
[...]
[28449.117207] __nla_put+0x37/0x40
[28449.132027] nla_put+0xf5/0x130
[28449.146261] sk_diag_fill.isra.4.constprop.5+0x5a0/0x750 [netlink_diag]
[28449.176608] __netlink_diag_dump+0x25a/0x700 [netlink_diag]
[28449.202215] netlink_diag_dump+0x176/0x240 [netlink_diag]
[28449.226834] netlink_dump+0x488/0xbb0
[28449.298014] __netlink_dump_start+0x4e8/0x760
[28449.317924] netlink_diag_handler_dump+0x261/0x340 [netlink_diag]
[28449.413414] sock_diag_rcv_msg+0x207/0x390
[28449.432409] netlink_rcv_skb+0x149/0x380
[28449.467647] sock_diag_rcv+0x2d/0x40
[28449.484362] netlink_unicast+0x562/0x7b0
[28449.564790] netlink_sendmsg+0xaa8/0xe60
[28449.661510] sock_sendmsg+0xcf/0x110
[28449.865631] __sys_sendmsg+0xf3/0x240
[28450.000964] SyS_sendmsg+0x32/0x50
[28450.016969] do_syscall_64+0x25c/0x6c0
[28450.154439] entry_SYSCALL64_slow_path+0x25/0x25
It was caused by no protection between nlk groups' free in netlink_release
and nlk groups' accessing in sk_diag_dump_groups. The similar issue also
exists in netlink_seq_show().
This patch is to defer nlk groups' free in deferred_put_nlk_sk.
Reported-by: ChunYu Wang <chunwang@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The commit 520ac30f45 ("net_sched: drop packets after root qdisc lock
is released) made a big change of tc for performance. There are two points
left in sch_prio and sch_qfq which are not changed with that commit. Now
enhance them now with __qdisc_drop.
Signed-off-by: Gao Feng <gfree.wind@vip.163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking updates from David Miller:
1) Support ipv6 checksum offload in sunvnet driver, from Shannon
Nelson.
2) Move to RB-tree instead of custom AVL code in inetpeer, from Eric
Dumazet.
3) Allow generic XDP to work on virtual devices, from John Fastabend.
4) Add bpf device maps and XDP_REDIRECT, which can be used to build
arbitrary switching frameworks using XDP. From John Fastabend.
5) Remove UFO offloads from the tree, gave us little other than bugs.
6) Remove the IPSEC flow cache, from Florian Westphal.
7) Support ipv6 route offload in mlxsw driver.
8) Support VF representors in bnxt_en, from Sathya Perla.
9) Add support for forward error correction modes to ethtool, from
Vidya Sagar Ravipati.
10) Add time filter for packet scheduler action dumping, from Jamal Hadi
Salim.
11) Extend the zerocopy sendmsg() used by virtio and tap to regular
sockets via MSG_ZEROCOPY. From Willem de Bruijn.
12) Significantly rework value tracking in the BPF verifier, from Edward
Cree.
13) Add new jump instructions to eBPF, from Daniel Borkmann.
14) Rework rtnetlink plumbing so that operations can be run without
taking the RTNL semaphore. From Florian Westphal.
15) Support XDP in tap driver, from Jason Wang.
16) Add 32-bit eBPF JIT for ARM, from Shubham Bansal.
17) Add Huawei hinic ethernet driver.
18) Allow to report MD5 keys in TCP inet_diag dumps, from Ivan
Delalande.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1780 commits)
i40e: point wb_desc at the nvm_wb_desc during i40e_read_nvm_aq
i40e: avoid NVM acquire deadlock during NVM update
drivers: net: xgene: Remove return statement from void function
drivers: net: xgene: Configure tx/rx delay for ACPI
drivers: net: xgene: Read tx/rx delay for ACPI
rocker: fix kcalloc parameter order
rds: Fix non-atomic operation on shared flag variable
net: sched: don't use GFP_KERNEL under spin lock
vhost_net: correctly check tx avail during rx busy polling
net: mdio-mux: add mdio_mux parameter to mdio_mux_init()
rxrpc: Make service connection lookup always check for retry
net: stmmac: Delete dead code for MDIO registration
gianfar: Fix Tx flow control deactivation
cxgb4: Ignore MPS_TX_INT_CAUSE[Bubble] for T6
cxgb4: Fix pause frame count in t4_get_port_stats
cxgb4: fix memory leak
tun: rename generic_xdp to skb_xdp
tun: reserve extra headroom only when XDP is set
net: dsa: bcm_sf2: Configure IMP port TC2QOS mapping
net: dsa: bcm_sf2: Advertise number of egress queues
...
Improve accuracy of statfs reporting for Ceph filesystems comprising
exactly one data pool. In this case, the Ceph monitor can now report
the space usage for the single data pool instead of the global data
for the entire Ceph cluster. Include support for this message in
mon_client and leverage it in ceph/super.
Signed-off-by: Douglas Fuller <dfuller@redhat.com>
Reviewed-by: Yan, Zheng <zyan@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
startsync is a no-op, has been for years. Remove it.
Link: http://tracker.ceph.com/issues/20604
Signed-off-by: Yanhu Cao <gmayyyha@gmail.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
RPC_TASK_NO_RETRANS_TIMEOUT is set when cl_noretranstimeo
is set, which happens when RPC_CLNT_CREATE_NO_RETRANS_TIMEOUT is set,
which happens when NFS_CS_NO_RETRANS_TIMEOUT is set.
This flag means "don't resend on a timeout, only resend if the
connection gets broken for some reason".
cl_discrtry is set when RPC_CLNT_CREATE_DISCRTRY is set, which
happens when NFS_CS_DISCRTRY is set.
This flag means "always disconnect before resending".
NFS_CS_NO_RETRANS_TIMEOUT and NFS_CS_DISCRTRY are both only set
in nfs4_init_client(), and it always sets both.
So we will never have a situation where only one of the flags is set.
So this code, which tests if timeout retransmits are allowed, and
disconnection is required, will never run.
So it makes sense to remove this code as it cannot be tested and
could confuse people reading the code (like me).
(alternately we could leave it there with a comment saying
it is never actually used).
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
When an RX BA session is started by the driver, and it has to tell
mac80211 about it, the corresponding bit in tid_rx_manage_offl gets
set and the BA session work is scheduled. Upon testing this bit, it
will call __ieee80211_start_rx_ba_session(), thus deadlocking as it
already holds the ampdu_mlme.mtx, which that acquires again.
Fix this by adding ___ieee80211_start_rx_ba_session(), a version of
the function that requires the mutex already held.
Cc: stable@vger.kernel.org
Fixes: 699cb58c8a ("mac80211: manage RX BA session offload without SKB queue")
Reported-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Commit 7a7c0a6438 ("mac80211: fix TX aggregation start/stop callback race")
added a cancellation of the ampdu work after the loop that stopped the
Tx and Rx BA sessions. However, in some cases, e.g., during HW reconfig,
the low level driver might call mac80211 APIs to complete the stopping
of the BA sessions, which would queue the ampdu work to handle the actual
completion. This work needs to be performed as otherwise mac80211 data
structures would not be properly synced.
Fix this by checking if BA session STOP_CB bit is set after the BA session
cancellation and properly clean the session.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
[Johannes: the work isn't flushed because that could do other things we
don't want, and the locking situation isn't clear]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Honor the NL80211_RRF_NO_HT40{MINUS,PLUS} flags in
reg_process_ht_flags_channel. Not doing so leads can lead
to a firmware assert in iwlwifi for example.
Fixes: b0d7aa5959 ("cfg80211: allow wiphy specific regdomain management")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Adopt the use of xprt_pin_rqst to eliminate contention between
Call-side users of rb_lock and the use of rb_lock in
rpcrdma_reply_handler.
This replaces the mechanism introduced in 431af645cf ("xprtrdma:
Fix client lock-up after application signal fires").
Use recv_lock to quickly find the completing rqst, pin it, then
drop the lock. At that point invalidation and pull-up of the Reply
XDR can be done. Both are often expensive operations.
Finally, take recv_lock again to signal completion to the RPC
layer. It also protects adjustment of "cwnd".
This greatly reduces the amount of time a lock is held by the
reply handler. Comparing lock_stat results shows a marked decrease
in contention on rb_lock and recv_lock.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
[trond.myklebust@primarydata.com: Remove call to rpcrdma_buffer_put() from
the "out_norqst:" path in rpcrdma_reply_handler.]
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
The bits in m_flags in struct rds_message are used for a plurality of
reasons, and from different contexts. To avoid any missing updates to
m_flags, use the atomic set_bit() instead of the non-atomic equivalent.
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Reviewed-by: Knut Omang <knut.omang@oracle.com>
Reviewed-by: Wei Lin Guay <wei.lin.guay@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When an RxRPC service packet comes in, the target connection is looked up
by an rb-tree search under RCU and a read-locked seqlock; the seqlock retry
check is, however, currently skipped if we got a match, but probably
shouldn't be in case the connection we found gets replaced whilst we're
doing a search.
Make the lookup procedure always go through need_seqretry(), even if the
lookup was successful. This makes sure we always pick up on a write-lock
event.
On the other hand, since we don't take a ref on the object, but rely on RCU
to prevent its destruction after dropping the seqlock, I'm not sure this is
necessary.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The rdma_rw API adjusts max_send_wr upwards during the
rdma_create_qp() call. If the ULP actually wants to take advantage
of these extra resources, it must increase the size of its send
completion queue (created before rdma_create_qp is called) and
increase its send queue accounting limit.
Use the new rdma_rw_mr_factor API to figure out the correct value
to use for the Send Queue and Send Completion Queue depths.
And, ensure that the chosen Send Queue depth for a newly created
transport does not overrun the QP WR limit of the underlying device.
Lastly, there's no longer a need to carry the Send Queue depth in
struct svcxprt_rdma, since the value is used only in the
svc_rdma_accept() path.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Ensure that the chosen Receive Queue depth for a newly created
transport does not overrun the QP WR limit of the underlying device.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
So that NFS WRITE payloads can eventually be placed directly into a
file's page cache, enable the RPC-over-RDMA transport to present
these payloads in the xdr_buf's page list, while placing trailing
content (such as a GETATTR operation) in the xdr_buf's tail.
After this change, the RPC-over-RDMA's "copy tail" hack, added by
commit a97c331f9a ("svcrdma: Handle additional inline content"),
is no longer needed and can be removed.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Pull HID update from Jiri Kosina:
- Wacom driver fixes/updates (device name generation improvements,
touch ring status support) from Jason Gerecke
- T100 touchpad support from Hans de Goede
- support for batteries driven by HID input reports, from Dmitry
Torokhov
- Arnd pointed out that driver_lock semaphore is superfluous, as driver
core already provides all the necessary concurency protection.
Removal patch from Binoy Jayan
- logical minimum numbering improvements in sensor-hub driver, from
Srinivas Pandruvada
- support for Microsoft Win8 Wireless Radio Controls extensions from
João Paulo Rechi Vita
- assorted small fixes and device ID additions
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (28 commits)
HID: prodikeys: constify snd_rawmidi_ops structures
HID: sensor: constify platform_device_id
HID: input: throttle battery uevents
HID: usbmouse: constify usb_device_id and fix space before '[' error
HID: usbkbd: constify usb_device_id and fix space before '[' error.
HID: hid-sensor-hub: Force logical minimum to 1 for power and report state
HID: wacom: Do not completely map WACOM_HID_WD_TOUCHRINGSTATUS usage
HID: asus: Add T100CHI bluetooth keyboard dock touchpad support
HID: ntrig: constify attribute_group structures.
HID: logitech-hidpp: constify attribute_group structures.
HID: sensor: constify attribute_group structures.
HID: multitouch: constify attribute_group structures.
HID: multitouch: use proper symbolic constant for 0xff310076 application
HID: multitouch: Support Asus T304UA media keys
HID: multitouch: Support HID_GD_WIRELESS_RADIO_CTLS
HID: input: optionally use device id in battery name
HID: input: map digitizer battery usage
HID: Remove the semaphore driver_lock
HID: wacom: add USB_HID dependency
HID: add ALWAYS_POLL quirk for Logitech 0xc077
...
We originally used skb->priority but that was not quite correct as this
bitfield needs to contain the egress switch queue we intend to send this
SKB to.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Let switch drivers indicate how many TX queues they support. Some
switches, such as Broadcom Starfighter 2 are designed with 8 egress
queues. Future changes will allow us to leverage the queue mapping and
direct the transmission towards a particular queue.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of using ifdef in the C file.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Suggested-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Tested-by: Yotam Gigi <yotamg@mellanox.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In flow dissector there are no limits to the number of nested
encapsulations or headers that might be dissected which makes for a
nice DOS attack. This patch sets a limit of the number of headers
that flow dissector will parse.
Headers includes network layer headers, transport layer headers, shim
headers for encapsulation, IPv6 extension headers, etc. The limit for
maximum number of headers to parse has be set to fifteen to account for
a reasonable number of encapsulations, extension headers, VLAN,
in a packet. Note that this limit does not supercede the STOP_AT_*
flags which may stop processing before the headers limit is reached.
Reported-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Tom Herbert <tom@quantonium.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
__skb_flow_dissect is riddled with gotos that make discerning the flow,
debugging, and extending the capability difficult. This patch
reorganizes things so that we only perform goto's after the two main
switch statements (no gotos within the cases now). It also eliminates
several goto labels so that there are only two labels that can be target
for goto.
Reported-by: Alexander Popov <alex.popov@linux.com>
Signed-off-by: Tom Herbert <tom@quantonium.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
We get a new link error in allmodconfig kernels after ftgmac100
started using the ncsi helpers:
ERROR: "ncsi_vlan_rx_kill_vid" [drivers/net/ethernet/faraday/ftgmac100.ko] undefined!
ERROR: "ncsi_vlan_rx_add_vid" [drivers/net/ethernet/faraday/ftgmac100.ko] undefined!
Related to that, we get another error when CONFIG_NET_NCSI is disabled:
drivers/net/ethernet/faraday/ftgmac100.c:1626:25: error: 'ncsi_vlan_rx_add_vid' undeclared here (not in a function); did you mean 'ncsi_start_dev'?
drivers/net/ethernet/faraday/ftgmac100.c:1627:26: error: 'ncsi_vlan_rx_kill_vid' undeclared here (not in a function); did you mean 'ncsi_vlan_rx_add_vid'?
This fixes both problems at once, using a 'static inline' stub helper
for the disabled case, and exporting the functions when they are present.
Fixes: 51564585d8 ("ftgmac100: Support NCSI VLAN filtering when available")
Fixes: 21acf63013 ("net/ncsi: Configure VLAN tag filter")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are no HT/VHT capabilities in cfg80211_ap_settings::beacon_ies,
these should be looked for in beacon's tail instead.
Fixes: 66cd794e3c ("nl80211: add HT/VHT capabilities to AP parameters")
Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When HW ROC is supported it is possible that after the HW notified
that the ROC has started, the ROC was cancelled and another ROC was
added while the hw_roc_start worker is waiting on the mutex (since
cancelling the ROC and adding another one also holds the same mutex).
As a result, the hw_roc_start worker will continue to run after the
new ROC is added but before it is actually started by the HW.
This may result in notifying userspace that the ROC has started before
it actually does, or in case of management tx ROC, in an attempt to
tx while not on the right channel.
In addition, when the driver will notify mac80211 that the second ROC
has started, mac80211 will warn that this ROC has already been
notified.
Fix this by flushing the hw_roc_start work before cancelling an ROC.
Cc: stable@vger.kernel.org
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Since drv_wake_tx_queue() is normally called in the TX path, which
is already in an RCU critical section, we should call it the same
way in the aggregation code path, so if the driver expects to be
able to use RCU, it'll already be protected without having to enter
a nested critical section.
Additionally, disable soft-IRQs, since not doing so could cause
issues in a driver that relies on them already being disabled like
in the other path.
Fixes: ba8c3d6f16 ("mac80211: add an intermediate software queue implementation")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This change adds null pointer check before dereferencing pointer dev on
netif_tx_start_all_queues() when an interface is added.
With iTXQ support, netif_tx_start_all_queues() is always called while
an interface is added. however, the netdev queues are not associated
and dev is null when the interface is either NL80211_IFTYPE_P2P_DEVICE
or NL80211_IFTYPE_NAN.
Signed-off-by: Chunho Lee <ch.lee@newracom.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
VHT MESH support was added, but the order of the IEs
wasn't enforced. Fix that.
Signed-off-by: Liad Kaufman <liad.kaufman@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Invoking ht_dbg() with too long of a string will print a warning.
Shorten the messages while retaining the printed patameters.
Signed-off-by: Sharon Dvir <sharon.dvir@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
With TXQs, the AP_VLAN interfaces are resolved to their owner AP
interface when enqueuing the frame, which makes sense since the
frame really goes out on that as far as the driver is concerned.
However, this introduces a problem: frames to be encrypted with
a VLAN-specific GTK will now be encrypted with the AP GTK, since
the information about which virtual interface to use to select
the key is taken from the TXQ.
Fix this by preserving info->control.vif and using that in the
dequeue function. This now requires doing the driver-mapping
in the dequeue as well.
Since there's no way to filter the frames that are sitting on a
TXQ, drop all frames, which may affect other interfaces, when an
AP_VLAN is removed.
Cc: stable@vger.kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
this fix minor issue in the log message.
in ieee80211_rx_mgmt_assoc_resp function, when assigning the
reassoc value from the mgmt frame control:
ieee80211_is_reassoc_resp function need to be used, instead of
ieee80211_is_reassoc_req function.
Signed-off-by: Simon Dinkin <simon.dinkin@tandemg.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Use proper ssize_t and size_t types for the return value and count
argument, move the offset last and make it an in/out argument like
all other read/write helpers, and make the buf argument a void pointer
to get rid of lots of casts in the callers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pablo Neira Ayuso says:
====================
Netfilter updates for next-net (part 2)
The following patchset contains Netfilter updates for net-next. This
patchset includes updates for nf_tables, removal of
CONFIG_NETFILTER_DEBUG and a new mode for xt_hashlimit. More
specifically, they:
1) Add new rate match mode for hashlimit, this introduces a new revision
for this match. The idea is to stop matching packets until ratelimit
criteria stands true. Patch from Vishwanath Pai.
2) Add ->select_ops indirection to nf_tables named objects, so we can
choose between different flavours of the same object type, patch from
Pablo M. Bermudo.
3) Shorter function names in nft_limit, basically:
s/nft_limit_pkt_bytes/nft_limit_bytes, also from Pablo M. Bermudo.
4) Add new stateful limit named object type, this allows us to create
limit policies that you can identify via name, also from Pablo.
5) Remove unused hooknum parameter in conntrack ->packet indirection.
From Florian Westphal.
6) Patches to remove CONFIG_NETFILTER_DEBUG and macros such as
IP_NF_ASSERT and IP_NF_ASSERT. From Varsha Rao.
7) Add nf_tables_updchain() helper function and use it from
nf_tables_newchain() to make it more maintainable. Similarly,
add nf_tables_addchain() and use it too.
8) Add new netlink NLM_F_NONREC flag, this flag should only be used for
deletion requests, specifically, to support non-recursive deletion.
Based on what we discussed during NFWS'17 in Faro.
9) Use NLM_F_NONREC from table and sets in nf_tables.
10) Support for recursive chain deletion. Table and set deletion
commands come with an implicit content flush on deletion, while
chains do not. This patch addresses this inconsistency by adding
the code to perform recursive chain deletions. This also comes with
the bits to deal with the new NLM_F_NONREC netlink flag.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull locking updates from Ingo Molnar:
- Add 'cross-release' support to lockdep, which allows APIs like
completions, where it's not the 'owner' who releases the lock, to be
tracked. It's all activated automatically under
CONFIG_PROVE_LOCKING=y.
- Clean up (restructure) the x86 atomics op implementation to be more
readable, in preparation of KASAN annotations. (Dmitry Vyukov)
- Fix static keys (Paolo Bonzini)
- Add killable versions of down_read() et al (Kirill Tkhai)
- Rework and fix jump_label locking (Marc Zyngier, Paolo Bonzini)
- Rework (and fix) tlb_flush_pending() barriers (Peter Zijlstra)
- Remove smp_mb__before_spinlock() and convert its usages, introduce
smp_mb__after_spinlock() (Peter Zijlstra)
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (56 commits)
locking/lockdep/selftests: Fix mixed read-write ABBA tests
sched/completion: Avoid unnecessary stack allocation for COMPLETION_INITIALIZER_ONSTACK()
acpi/nfit: Fix COMPLETION_INITIALIZER_ONSTACK() abuse
locking/pvqspinlock: Relax cmpxchg's to improve performance on some architectures
smp: Avoid using two cache lines for struct call_single_data
locking/lockdep: Untangle xhlock history save/restore from task independence
locking/refcounts, x86/asm: Disable CONFIG_ARCH_HAS_REFCOUNT for the time being
futex: Remove duplicated code and fix undefined behaviour
Documentation/locking/atomic: Finish the document...
locking/lockdep: Fix workqueue crossrelease annotation
workqueue/lockdep: 'Fix' flush_work() annotation
locking/lockdep/selftests: Add mixed read-write ABBA tests
mm, locking/barriers: Clarify tlb_flush_pending() barriers
locking/lockdep: Make CONFIG_LOCKDEP_CROSSRELEASE and CONFIG_LOCKDEP_COMPLETIONS truly non-interactive
locking/lockdep: Explicitly initialize wq_barrier::done::map
locking/lockdep: Rename CONFIG_LOCKDEP_COMPLETE to CONFIG_LOCKDEP_COMPLETIONS
locking/lockdep: Reword title of LOCKDEP_CROSSRELEASE config
locking/lockdep: Make CONFIG_LOCKDEP_CROSSRELEASE part of CONFIG_PROVE_LOCKING
locking/refcounts, x86/asm: Implement fast refcount overflow protection
locking/lockdep: Fix the rollback and overwrite detection logic in crossrelease
...
This patch sorts out an asymmetry in deletions. Currently, table and set
deletion commands come with an implicit content flush on deletion.
However, chain deletion results in -EBUSY if there is content in this
chain, so no implicit flush happens. So you have to send a flush command
in first place to delete chains, this is inconsistent and it can be
annoying in terms of user experience.
This patch uses the new NLM_F_NONREC flag to request non-recursive chain
deletion, ie. if the chain to be removed contains rules, then this
returns EBUSY. This problem was discussed during the NFWS'17 in Faro,
Portugal. In iptables, you hit -EBUSY if you try to delete a chain that
contains rules, so you have to flush first before you can remove
anything. Since iptables-compat uses the nf_tables netlink interface, it
has to use the NLM_F_NONREC flag from userspace to retain the original
iptables semantics, ie. bail out on removing chains that contain rules.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Bail out if user requests non-recursive deletion for tables and sets.
This new flags tells nf_tables netlink interface to reject deletions if
tables and sets have content.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
nf_tables_newchain() is too large, wrap the chain update path in a
function to make it more maintainable.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Pull RCU updates from Ingo Molnad:
"The main RCU related changes in this cycle were:
- Removal of spin_unlock_wait()
- SRCU updates
- RCU torture-test updates
- RCU Documentation updates
- Extend the sys_membarrier() ABI with the MEMBARRIER_CMD_PRIVATE_EXPEDITED variant
- Miscellaneous RCU fixes
- CPU-hotplug fixes"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (63 commits)
arch: Remove spin_unlock_wait() arch-specific definitions
locking: Remove spin_unlock_wait() generic definitions
drivers/ata: Replace spin_unlock_wait() with lock/unlock pair
ipc: Replace spin_unlock_wait() with lock/unlock pair
exit: Replace spin_unlock_wait() with lock/unlock pair
completion: Replace spin_unlock_wait() with lock/unlock pair
doc: Set down RCU's scheduling-clock-interrupt needs
doc: No longer allowed to use rcu_dereference on non-pointers
doc: Add RCU files to docbook-generation files
doc: Update memory-barriers.txt for read-to-write dependencies
doc: Update RCU documentation
membarrier: Provide expedited private command
rcu: Remove exports from rcu_idle_exit() and rcu_idle_enter()
rcu: Add warning to rcu_idle_enter() for irqs enabled
rcu: Make rcu_idle_enter() rely on callers disabling irqs
rcu: Add assertions verifying blocked-tasks list
rcu/tracing: Set disable_rcu_irq_enter on rcu_eqs_exit()
rcu: Add TPS() protection for _rcu_barrier_trace strings
rcu: Use idle versions of swait to make idle-hack clear
swait: Add idle variants which don't contribute to load average
...
This patch removes CONFIG_NETFILTER_DEBUG and _ASSERT() macros as they
are no longer required. Replace _ASSERT() macros with WARN_ON().
Signed-off-by: Varsha Rao <rvarsha016@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Register a new limit stateful object type into the stateful object
infrastructure.
Signed-off-by: Pablo M. Bermudo Garay <pablombg@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Just a small refactor patch in order to improve the code readability.
Signed-off-by: Pablo M. Bermudo Garay <pablombg@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This patch adds support for overloading stateful objects operations
through the select_ops() callback, just as it is implemented for
expressions.
This change is needed for upcoming additions to the stateful objects
infrastructure.
Signed-off-by: Pablo M. Bermudo Garay <pablombg@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This patch adds a new feature to hashlimit that allows matching on the
current packet/byte rate without rate limiting. This can be enabled
with a new flag --hashlimit-rate-match. The match returns true if the
current rate of packets is above/below the user specified value.
The main difference between the existing algorithm and the new one is
that the existing algorithm rate-limits the flow whereas the new
algorithm does not. Instead it *classifies* the flow based on whether
it is above or below a certain rate. I will demonstrate this with an
example below. Let us assume this rule:
iptables -A INPUT -m hashlimit --hashlimit-above 10/s -j new_chain
If the packet rate is 15/s, the existing algorithm would ACCEPT 10
packets every second and send 5 packets to "new_chain".
But with the new algorithm, as long as the rate of 15/s is sustained,
all packets will continue to match and every packet is sent to new_chain.
This new functionality will let us classify different flows based on
their current rate, so that further decisions can be made on them based on
what the current rate is.
This is how the new algorithm works:
We divide time into intervals of 1 (sec/min/hour) as specified by
the user. We keep track of the number of packets/bytes processed in the
current interval. After each interval we reset the counter to 0.
When we receive a packet for match, we look at the packet rate
during the current interval and the previous interval to make a
decision:
if [ prev_rate < user and cur_rate < user ]
return Below
else
return Above
Where cur_rate is the number of packets/bytes seen in the current
interval, prev is the number of packets/bytes seen in the previous
interval and 'user' is the rate specified by the user.
We also provide flexibility to the user for choosing the time
interval using the option --hashilmit-interval. For example the user can
keep a low rate like x/hour but still keep the interval as small as 1
second.
To preserve backwards compatibility we have to add this feature in a new
revision, so I've created revision 3 for hashlimit. The two new options
we add are:
--hashlimit-rate-match
--hashlimit-rate-interval
I have updated the help text to add these new options. Also added a few
tests for the new options.
Suggested-by: Igor Lubashev <ilubashe@akamai.com>
Reviewed-by: Josh Hunt <johunt@akamai.com>
Signed-off-by: Vishwanath Pai <vpai@akamai.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Johan Hedberg says:
====================
pull request: bluetooth-next 2017-09-03
Here's one last bluetooth-next pull request for the 4.14 kernel:
- NULL pointer fix in ca8210 802.15.4 driver
- A few "const" fixes
- New Kconfig option for disabling legacy interfaces
Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for your net-next
tree. Basically, updates to the conntrack core, enhancements for
nf_tables, conversion of netfilter hooks from linked list to array to
improve memory locality and asorted improvements for the Netfilter
codebase. More specifically, they are:
1) Add expection to hashes after timer initialization to prevent
access from another CPU that walks on the hashes and calls
del_timer(), from Florian Westphal.
2) Don't update nf_tables chain counters from hot path, this is only
used by the x_tables compatibility layer.
3) Get rid of nested rcu_read_lock() calls from netfilter hook path.
Hooks are always guaranteed to run from rcu read side, so remove
nested rcu_read_lock() where possible. Patch from Taehee Yoo.
4) nf_tables new ruleset generation notifications include PID and name
of the process that has updated the ruleset, from Phil Sutter.
5) Use skb_header_pointer() from nft_fib, so we can reuse this code from
the nf_family netdev family. Patch from Pablo M. Bermudo.
6) Add support for nft_fib in nf_tables netdev family, also from Pablo.
7) Use deferrable workqueue for conntrack garbage collection, to reduce
power consumption, from Patch from Subash Abhinov Kasiviswanathan.
8) Add nf_ct_expect_iterate_net() helper and use it. From Florian
Westphal.
9) Call nf_ct_unconfirmed_destroy only from cttimeout, from Florian.
10) Drop references on conntrack removal path when skbuffs has escaped via
nfqueue, from Florian.
11) Don't queue packets to nfqueue with dying conntrack, from Florian.
12) Constify nf_hook_ops structure, from Florian.
13) Remove neededlessly branch in nf_tables trace code, from Phil Sutter.
14) Add nla_strdup(), from Phil Sutter.
15) Rise nf_tables objects name size up to 255 chars, people want to use
DNS names, so increase this according to what RFC 1035 specifies.
Patch series from Phil Sutter.
16) Kill nf_conntrack_default_on, it's broken. Default on conntrack hook
registration on demand, suggested by Eric Dumazet, patch from Florian.
17) Remove unused variables in compat_copy_entry_from_user both in
ip_tables and arp_tables code. Patch from Taehee Yoo.
18) Constify struct nf_conntrack_l4proto, from Julia Lawall.
19) Constify nf_loginfo structure, also from Julia.
20) Use a single rb root in connlimit, from Taehee Yoo.
21) Remove unused netfilter_queue_init() prototype, from Taehee Yoo.
22) Use audit_log() instead of open-coding it, from Geliang Tang.
23) Allow to mangle tcp options via nft_exthdr, from Florian.
24) Allow to fetch TCP MSS from nft_rt, from Florian. This includes
a fix for a miscalculation of the minimal length.
25) Simplify branch logic in h323 helper, from Nick Desaulniers.
26) Calculate netlink attribute size for conntrack tuple at compile
time, from Florian.
27) Remove protocol name field from nf_conntrack_{l3,l4}proto structure.
From Florian.
28) Remove holes in nf_conntrack_l4proto structure, so it becomes
smaller. From Florian.
29) Get rid of print_tuple() indirection for /proc conntrack listing.
Place all the code in net/netfilter/nf_conntrack_standalone.c.
Patch from Florian.
30) Do not built in print_conntrack() if CONFIG_NF_CONNTRACK_PROCFS is
off. From Florian.
31) Constify most nf_conntrack_{l3,l4}proto helper functions, from
Florian.
32) Fix broken indentation in ebtables extensions, from Colin Ian King.
33) Fix several harmless sparse warning, from Florian.
34) Convert netfilter hook infrastructure to use array for better memory
locality, joint work done by Florian and Aaron Conole. Moreover, add
some instrumentation to debug this.
35) Batch nf_unregister_net_hooks() calls, to call synchronize_net once
per batch, from Florian.
36) Get rid of noisy logging in ICMPv6 conntrack helper, from Florian.
37) Get rid of obsolete NFDEBUG() instrumentation, from Varsha Rao.
38) Remove unused code in the generic protocol tracker, from Davide
Caratti.
I think I will have material for a second Netfilter batch in my queue if
time allow to make it fit in this merge window.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Using l2tp_tunnel_find() in pppol2tp_session_create() and
l2tp_eth_create() is racy, because no reference is held on the
returned session. These functions are only used to implement the
->session_create callback which is run by l2tp_nl_cmd_session_create().
Therefore searching for the parent tunnel isn't necessary because
l2tp_nl_cmd_session_create() already has a pointer to it and holds a
reference.
This patch modifies ->session_create()'s prototype to directly pass the
the parent tunnel as parameter, thus avoiding searching for it in
pppol2tp_session_create() and l2tp_eth_create().
Since we have to touch the ->session_create() call in
l2tp_nl_cmd_session_create(), let's also remove the useless conditional:
we know that ->session_create isn't NULL at this point because it's
already been checked earlier in this same function.
Finally, one might be tempted to think that the removed
l2tp_tunnel_find() calls were harmless because they would return the
same tunnel as the one held by l2tp_nl_cmd_session_create() anyway.
But that tunnel might be removed and a new one created with same tunnel
Id before the l2tp_tunnel_find() call. In this case l2tp_tunnel_find()
would return the new tunnel which wouldn't be protected by the
reference held by l2tp_nl_cmd_session_create().
Fixes: 309795f4be ("l2tp: Add netlink control API for L2TP")
Fixes: d9e31d17ce ("l2tp: Add L2TP ethernet pseudowire support")
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
l2tp_tunnel_destruct() sets tunnel->sock to NULL, then removes the
tunnel from the pernet list and finally closes all its sessions.
Therefore, it's possible to add a session to a tunnel that is still
reachable, but for which tunnel->sock has already been reset. This can
make l2tp_session_create() dereference a NULL pointer when calling
sock_hold(tunnel->sock).
This patch adds the .acpt_newsess field to struct l2tp_tunnel, which is
used by l2tp_tunnel_closeall() to prevent addition of new sessions to
tunnels. Resetting tunnel->sock is done after l2tp_tunnel_closeall()
returned, so that l2tp_session_add_to_tunnel() can safely take a
reference on it when .acpt_newsess is true.
The .acpt_newsess field is modified in l2tp_tunnel_closeall(), rather
than in l2tp_tunnel_destruct(), so that it benefits all tunnel removal
mechanisms. E.g. on UDP tunnels, a session could be added to a tunnel
after l2tp_udp_encap_destroy() proceeded. This would prevent the tunnel
from being removed because of the references held by this new session
on the tunnel and its socket. Even though the session could be removed
manually later on, this defeats the purpose of
commit 9980d001ce ("l2tp: add udp encap socket destroy handler").
Fixes: fd558d186d ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts")
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit 1d6119baf0.
After reverting commit 6d7b857d54 ("net: use lib/percpu_counter API
for fragmentation mem accounting") then here is no need for this
fix-up patch. As percpu_counter is no longer used, it cannot
memory leak it any-longer.
Fixes: 6d7b857d54 ("net: use lib/percpu_counter API for fragmentation mem accounting")
Fixes: 1d6119baf0 ("net: fix percpu memory leaks")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit 6d7b857d54.
There is a bug in fragmentation codes use of the percpu_counter API,
that can cause issues on systems with many CPUs.
The frag_mem_limit() just reads the global counter (fbc->count),
without considering other CPUs can have upto batch size (130K) that
haven't been subtracted yet. Due to the 3MBytes lower thresh limit,
this become dangerous at >=24 CPUs (3*1024*1024/130000=24).
The correct API usage would be to use __percpu_counter_compare() which
does the right thing, and takes into account the number of (online)
CPUs and batch size, to account for this and call __percpu_counter_sum()
when needed.
We choose to revert the use of the lib/percpu_counter API for frag
memory accounting for several reasons:
1) On systems with CPUs > 24, the heavier fully locked
__percpu_counter_sum() is always invoked, which will be more
expensive than the atomic_t that is reverted to.
Given systems with more than 24 CPUs are becoming common this doesn't
seem like a good option. To mitigate this, the batch size could be
decreased and thresh be increased.
2) The add_frag_mem_limit+sub_frag_mem_limit pairs happen on the RX
CPU, before SKBs are pushed into sockets on remote CPUs. Given
NICs can only hash on L2 part of the IP-header, the NIC-RXq's will
likely be limited. Thus, a fair chance that atomic add+dec happen
on the same CPU.
Revert note that commit 1d6119baf0 ("net: fix percpu memory leaks")
removed init_frag_mem_limit() and instead use inet_frags_init_net().
After this revert, inet_frags_uninit_net() becomes empty.
Fixes: 6d7b857d54 ("net: use lib/percpu_counter API for fragmentation mem accounting")
Fixes: 1d6119baf0 ("net: fix percpu memory leaks")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a listener registers to the FIB notification chain it receives a
dump of the FIB entries and rules from existing address families by
invoking their dump operations.
While we call into these modules we need to make sure they aren't
removed. Do that by increasing their reference count before invoking
their dump operations and decrease it afterwards.
Fixes: 04b1d4e50e ("net: core: Make the FIB notification chain generic")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
v2: added the change in drivers/vhost/net.c as spotted
by Willem.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In order to convert this atomic_t refcnt to refcount_t,
we need to init the refcount to one to not trigger
a 0 -> 1 transition.
This also removes one atomic operation in fast path.
v2: removed dead code in sock_zerocopy_put_abort()
as suggested by Willem.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Report TCP MD5 (RFC2385) signing keys, addresses and address prefixes to
processes with CAP_NET_ADMIN requesting INET_DIAG_INFO. Currently it is
not possible to retrieve these from the kernel once they have been
configured on sockets.
Signed-off-by: Ivan Delalande <colona@arista.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extend inet_diag_handler to allow individual protocols to report
additional data on INET_DIAG_INFO through idiag_get_aux. The size
can be dynamic and is computed by idiag_get_aux_size.
Signed-off-by: Ivan Delalande <colona@arista.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Grepping for "sizeof\(.+\) / sizeof\(" found this as one of the first
candidates.
Maybe a coccinelle can catch all of those.
Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Excess of seafood or something happened while I cooked the commit
adding RB tree to inetpeer.
Of course, RCU rules need to be respected or bad things can happen.
In this particular loop, we need to read *pp once per iteration, not
twice.
Fixes: b145425f26 ("inetpeer: remove AVL implementation in favor of RB tree")
Reported-by: John Sperbeck <jsperbeck@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from David Miller:
1) Fix handling of pinned BPF map nodes in hash of maps, from Daniel
Borkmann.
2) IPSEC ESP error paths leak memory, from Steffen Klassert.
3) We need an RCU grace period before freeing fib6_node objects, from
Wei Wang.
4) Must check skb_put_padto() return value in HSR driver, from FLorian
Fainelli.
5) Fix oops on PHY probe failure in ftgmac100 driver, from Andrew
Jeffery.
6) Fix infinite loop in UDP queue when using SO_PEEK_OFF, from Eric
Dumazet.
7) Use after free when tcf_chain_destroy() called multiple times, from
Jiri Pirko.
8) Fix KSZ DSA tag layer multiple free of SKBS, from Florian Fainelli.
9) Fix leak of uninitialized memory in sctp_get_sctp_info(),
inet_diag_msg_sctpladdrs_fill() and inet_diag_msg_sctpaddrs_fill().
From Stefano Brivio.
10) L2TP tunnel refcount fixes from Guillaume Nault.
11) Don't leak UDP secpath in udp_set_dev_scratch(), from Yossi
Kauperman.
12) Revert a PHY layer change wrt. handling of PHY_HALTED state in
phy_stop_machine(), it causes regressions for multiple people. From
Florian Fainelli.
13) When packets are sent out of br0 we have to clear the
offload_fwdq_mark value.
14) Several NULL pointer deref fixes in packet schedulers when their
->init() routine fails. From Nikolay Aleksandrov.
15) Aquantium devices cannot checksum offload correctly when the packet
is <= 60 bytes. From Pavel Belous.
16) Fix vnet header access past end of buffer in AF_PACKET, from
Benjamin Poirier.
17) Double free in probe error paths of nfp driver, from Dan Carpenter.
18) QOS capability not checked properly in DCB init paths of mlx5
driver, from Huy Nguyen.
19) Fix conflicts between firmware load failure and health_care timer in
mlx5, also from Huy Nguyen.
20) Fix dangling page pointer when DMA mapping errors occur in mlx5,
from Eran Ben ELisha.
21) ->ndo_setup_tc() in bnxt_en driver doesn't count rings properly,
from Michael Chan.
22) Missing MSIX vector free in bnxt_en, also from Michael Chan.
23) Refcount leak in xfrm layer when using sk_policy, from Lorenzo
Colitti.
24) Fix copy of uninitialized data in qlge driver, from Arnd Bergmann.
25) bpf_setsockopts() erroneously always returns -EINVAL even on
success. Fix from Yuchung Cheng.
26) tipc_rcv() needs to linearize the SKB before parsing the inner
headers, from Parthasarathy Bhuvaragan.
27) Fix deadlock between link status updates and link removal in netvsc
driver, from Stephen Hemminger.
28) Missed locking of page fragment handling in ESP output, from Steffen
Klassert.
29) Fix refcnt leak in ebpf congestion control code, from Sabrina
Dubroca.
30) sxgbe_probe_config_dt() doesn't check devm_kzalloc()'s return value,
from Christophe Jaillet.
31) Fix missing ipv6 rx_dst_cookie update when rx_dst is updated during
early demux, from Paolo Abeni.
32) Several info leaks in xfrm_user layer, from Mathias Krause.
33) Fix out of bounds read in cxgb4 driver, from Stefano Brivio.
34) Properly propagate obsolete state of route upwards in ipv6 so that
upper holders like xfrm can see it. From Xin Long.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (118 commits)
udp: fix secpath leak
bridge: switchdev: Clear forward mark when transmitting packet
mlxsw: spectrum: Forbid linking to devices that have uppers
wl1251: add a missing spin_lock_init()
Revert "net: phy: Correctly process PHY_HALTED in phy_stop_machine()"
net: dsa: bcm_sf2: Fix number of CFP entries for BCM7278
kcm: do not attach PF_KCM sockets to avoid deadlock
sch_tbf: fix two null pointer dereferences on init failure
sch_sfq: fix null pointer dereference on init failure
sch_netem: avoid null pointer deref on init failure
sch_fq_codel: avoid double free on init failure
sch_cbq: fix null pointer dereferences on init failure
sch_hfsc: fix null pointer deref and double free on init failure
sch_hhf: fix null pointer dereference on init failure
sch_multiq: fix double free on init failure
sch_htb: fix crash on init failure
net/mlx5e: Fix CQ moderation mode not set properly
net/mlx5e: Fix inline header size for small packets
net/mlx5: E-Switch, Unload the representors in the correct order
net/mlx5e: Properly resolve TC offloaded ipv6 vxlan tunnel source address
...
Make sock_filter_is_valid_access consistent with other is_valid_access
helpers.
Requested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
After commit dce4551cb2 ("udp: preserve head state for IP_CMSG_PASSSEC")
we preserve the secpath for the whole skb lifecycle, but we also
end up leaking a reference to it.
We must clear the head state on skb reception, if secpath is
present.
Fixes: dce4551cb2 ("udp: preserve head state for IP_CMSG_PASSSEC")
Signed-off-by: Yossi Kuperman <yossiku@mellanox.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 6bc506b4fb ("bridge: switchdev: Add forward mark support for
stacked devices") added the 'offload_fwd_mark' bit to the skb in order
to allow drivers to indicate to the bridge driver that they already
forwarded the packet in L2.
In case the bit is set, before transmitting the packet from each port,
the port's mark is compared with the mark stored in the skb's control
block. If both marks are equal, we know the packet arrived from a switch
device that already forwarded the packet and it's not re-transmitted.
However, if the packet is transmitted from the bridge device itself
(e.g., br0), we should clear the 'offload_fwd_mark' bit as the mark
stored in the skb's control block isn't valid.
This scenario can happen in rare cases where a packet was trapped during
L3 forwarding and forwarded by the kernel to a bridge device.
Fixes: 6bc506b4fb ("bridge: switchdev: Add forward mark support for stacked devices")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: Yotam Gigi <yotamg@mellanox.com>
Tested-by: Yotam Gigi <yotamg@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The mlxsw driver relies on NETDEV_CHANGEUPPER events to configure the
device in case a port is enslaved to a master netdev such as bridge or
bond.
Since the driver ignores events unrelated to its ports and their
uppers, it's possible to engineer situations in which the device's data
path differs from the kernel's.
One example to such a situation is when a port is enslaved to a bond
that is already enslaved to a bridge. When the bond was enslaved the
driver ignored the event - as the bond wasn't one of its uppers - and
therefore a bridge port instance isn't created in the device.
Until such configurations are supported forbid them by checking that the
upper device doesn't have uppers of its own.
Fixes: 0d65fc1304 ("mlxsw: spectrum: Implement LAG port join/leave")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: Nogah Frankel <nogahf@mellanox.com>
Tested-by: Nogah Frankel <nogahf@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2017-09-01
This should be the last ipsec-next pull request for this
release cycle:
1) Support netdevice ESP trailer removal when decryption
is offloaded. From Yossi Kuperman.
2) Fix overwritten return value of copy_sec_ctx().
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow BPF programs run on sock create to use the get_current_uid_gid
helper. IPv4 and IPv6 sockets are created in a process context so
there is always a valid uid/gid
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add socket mark and priority to fields that can be set by
ebpf program when a socket is created.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
This will be used by the IPv6 host table which will be introduced in the
following patches. The fields in the header are added per-use. This header
is global and can be reused by many drivers.
Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add handling of IPV6_PKTOPTIONS to dccp_v6_do_rcv() in net/dccp/ipv6.c,
similar
to the handling in net/ipv6/tcp_ipv6.c
Signed-off-by: Andrii Vladyka <tulup@mail.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
This extends bridge fdb table tracepoints to also cover
learned fdb entries in the br_fdb_update path. Note that
unlike other tracepoints I have moved this to when the fdb
is modified because this is in the datapath and can generate
a lot of noise in the trace output. br_fdb_update is also called
from added_by_user context in the NTF_USE case which is already
traced ..hence the !added_by_user check.
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
TC filters when used as classifiers are bound to TC classes.
However, there is a hidden difference when adding them in different
orders:
1. If we add tc classes before its filters, everything is fine.
Logically, the classes exist before we specify their ID's in
filters, it is easy to bind them together, just as in the current
code base.
2. If we add tc filters before the tc classes they bind, we have to
do dynamic lookup in fast path. What's worse, this happens all
the time not just once, because on fast path tcf_result is passed
on stack, there is no way to propagate back to the one in tc filters.
This hidden difference hurts performance silently if we have many tc
classes in hierarchy.
This patch intends to close this gap by doing the reverse binding when
we create a new class, in this case we can actually search all the
filters in its parent, match and fixup by classid. And because
tcf_result is specific to each type of tc filter, we have to introduce
a new ops for each filter to tell how to bind the class.
Note, we still can NOT totally get rid of those class lookup in
->enqueue() because cgroup and flow filters have no way to determine
the classid at setup time, they still have to go through dynamic lookup.
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A recent commit added an output_mark. When copying
this output_mark, the return value of copy_sec_ctx
is overwitten without a check. Fix this by copying
the output_mark before the security context.
Fixes: 077fbac405 ("net: xfrm: support setting an output mark.")
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
In conjunction with crypto offload [1], removing the ESP trailer by
hardware can potentially improve the performance by avoiding (1) a
cache miss incurred by reading the nexthdr field and (2) the necessity
to calculate the csum value of the trailer in order to keep skb->csum
valid.
This patch introduces the changes to the xfrm stack and merely serves
as an infrastructure. Subsequent patch to mlx5 driver will put this to
a good use.
[1] https://www.mail-archive.com/netdev@vger.kernel.org/msg175733.html
Signed-off-by: Yossi Kuperman <yossiku@mellanox.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
