The init counter is not decremented on initialisation errors, which
prevents retrying initialisation.
Add the missing decrement on initialisation errors so that the counter
reflects the state of the device.
Fixes: e78f3d15e1 ("phy: qcom-qmp: new qmp phy driver for qcom-chipsets")
Cc: stable@vger.kernel.org # 4.12
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230502103810.12061-3-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The init counter is not decremented on initialisation errors, which
prevents retrying initialisation and can lead to the runtime suspend
callback attempting to disable resources that have never been enabled.
Add the missing decrement on initialisation errors so that the counter
reflects the state of the device.
Fixes: e78f3d15e1 ("phy: qcom-qmp: new qmp phy driver for qcom-chipsets")
Cc: stable@vger.kernel.org # 4.12
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230502103810.12061-2-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
- Fix for mediatek driver warning for variable used uninitialized and fix
for wrong pll math
-----BEGIN PGP SIGNATURE-----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=4GRz
-----END PGP SIGNATURE-----
Merge tag 'phy-fixes-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy fixes from Vinod Koul:
- Fix for mediatek driver warning for variable used uninitialized and
for wrong pll math
* tag 'phy-fixes-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
phy: mediatek: hdmi: mt8195: fix wrong pll calculus
phy: mediatek: hdmi: mt8195: fix uninitialized variable usage in pll_calc
The clock rate calculus in mtk_hdmi_pll_calc() was wrong when it has
been replaced by 'div_u64'.
Fix the issue by multiplying the values in the denominator instead of
dividing them.
Fixes: 45810d486b ("phy: mediatek: add support for phy-mtk-hdmi-mt8195")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
Link: https://lore.kernel.org/r/20230413-fixes-for-mt8195-hdmi-phy-v2-2-bbad62e64321@baylibre.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The ret variable in mtk_hdmi_pll_calc() was used unitialized as reported
by the kernel test robot.
Fix the issue by removing the variable altogether and testing out the
return value of mtk_hdmi_pll_set_hw()
Fixes: 45810d486b ("phy: mediatek: add support for phy-mtk-hdmi-mt8195")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230413-fixes-for-mt8195-hdmi-phy-v2-1-bbad62e64321@baylibre.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
- New support:
- UFS PHY for Qualcomm SA8775p, SM7150
- PCIe 2 lane phy support for sc8180x and PCIe PHY for SDX65
- Mediatke hdmi phy support for mt8195
- rockchip naneng combo phy support for RK358
- Updates:
- Drop Thunder Bay eMMC PHY driver
- RC support for PCIe phy for Qualcomm SDX55
- SGMII support in WIZ driver for J721E
- PCIe and multilink SGMII PHY support in cadence driver
- Big pile of platform remove callback returning void conversions
-----BEGIN PGP SIGNATURE-----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=WwgW
-----END PGP SIGNATURE-----
Merge tag 'phy-for-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy updates from Vinod Koul:
"New support:
- UFS PHY for Qualcomm SA8775p, SM7150
- PCIe 2 lane phy support for sc8180x and PCIe PHY for SDX65
- Mediatke hdmi phy support for mt8195
- rockchip naneng combo phy support for RK358
Updates:
- Drop Thunder Bay eMMC PHY driver
- RC support for PCIe phy for Qualcomm SDX55
- SGMII support in WIZ driver for J721E
- PCIe and multilink SGMII PHY support in cadence driver
- Big pile of platform remove callback returning void conversions"
* tag 'phy-for-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (77 commits)
phy: cadence: cdns-dphy-rx: Add common module reset support
phy: ti: j721e-wiz: Add SGMII support in WIZ driver for J721E
dt-bindings: phy: ti: phy-gmii-sel: Add support for J784S4 CPSW9G
phy: ti: j721e-wiz: Fix unreachable code in wiz_mode_select()
phy: cadence: Sierra: Add PCIe + SGMII PHY multilink configuration
phy: mediatek: add support for phy-mtk-hdmi-mt8195
phy: phy-mtk-hdmi: Add generic phy configure callback
dt-bindings: phy: mediatek: hdmi-phy: Add mt8195 compatible
phy: tegra: xusb: Add missing tegra_xusb_port_unregister for usb2_port and ulpi_port
dt-bindings: phy: ti,phy-j721e-wiz: document clock-output-names
dt-bindings: phy: ti,phy-j721e-wiz: drop assigned-clocks
dt-bindings: phy: ti,phy-am654-serdes: drop assigned-clocks type
dt-bindings: phy: cadence-torrent: drop assigned-clocks
dt-bindings: phy: cadence-sierra: drop assigned-clocks
phy: rockchip: remove unused hw_to_inno function
phy: qualcomm: phy-qcom-qmp-ufs: add definitions for sa8775p
dt-bindings: phy: qmp-ufs: describe the UFS PHY for sa8775p
phy: qcom-qmp-pcie: drop sdm845_qhp_pcie_rx_tbl
phy: qcom-qmp-pcie: sc8180x PCIe PHY has 2 lanes
phy: qcom-qmp-ufs: Add SM7150 support
...
The summary of the changes for this pull requests is:
* Song Liu's new struct module_memory replacement
* Nick Alcock's MODULE_LICENSE() removal for non-modules
* My cleanups and enhancements to reduce the areas where we vmalloc
module memory for duplicates, and the respective debug code which
proves the remaining vmalloc pressure comes from userspace.
Most of the changes have been in linux-next for quite some time except
the minor fixes I made to check if a module was already loaded
prior to allocating the final module memory with vmalloc and the
respective debug code it introduces to help clarify the issue. Although
the functional change is small it is rather safe as it can only *help*
reduce vmalloc space for duplicates and is confirmed to fix a bootup
issue with over 400 CPUs with KASAN enabled. I don't expect stable
kernels to pick up that fix as the cleanups would have also had to have
been picked up. Folks on larger CPU systems with modules will want to
just upgrade if vmalloc space has been an issue on bootup.
Given the size of this request, here's some more elaborate details
on this pull request.
The functional change change in this pull request is the very first
patch from Song Liu which replaces the struct module_layout with a new
struct module memory. The old data structure tried to put together all
types of supported module memory types in one data structure, the new
one abstracts the differences in memory types in a module to allow each
one to provide their own set of details. This paves the way in the
future so we can deal with them in a cleaner way. If you look at changes
they also provide a nice cleanup of how we handle these different memory
areas in a module. This change has been in linux-next since before the
merge window opened for v6.3 so to provide more than a full kernel cycle
of testing. It's a good thing as quite a bit of fixes have been found
for it.
Jason Baron then made dynamic debug a first class citizen module user by
using module notifier callbacks to allocate / remove module specific
dynamic debug information.
Nick Alcock has done quite a bit of work cross-tree to remove module
license tags from things which cannot possibly be module at my request
so to:
a) help him with his longer term tooling goals which require a
deterministic evaluation if a piece a symbol code could ever be
part of a module or not. But quite recently it is has been made
clear that tooling is not the only one that would benefit.
Disambiguating symbols also helps efforts such as live patching,
kprobes and BPF, but for other reasons and R&D on this area
is active with no clear solution in sight.
b) help us inch closer to the now generally accepted long term goal
of automating all the MODULE_LICENSE() tags from SPDX license tags
In so far as a) is concerned, although module license tags are a no-op
for non-modules, tools which would want create a mapping of possible
modules can only rely on the module license tag after the commit
8b41fc4454 ("kbuild: create modules.builtin without Makefile.modbuiltin
or tristate.conf"). Nick has been working on this *for years* and
AFAICT I was the only one to suggest two alternatives to this approach
for tooling. The complexity in one of my suggested approaches lies in
that we'd need a possible-obj-m and a could-be-module which would check
if the object being built is part of any kconfig build which could ever
lead to it being part of a module, and if so define a new define
-DPOSSIBLE_MODULE [0]. A more obvious yet theoretical approach I've
suggested would be to have a tristate in kconfig imply the same new
-DPOSSIBLE_MODULE as well but that means getting kconfig symbol names
mapping to modules always, and I don't think that's the case today. I am
not aware of Nick or anyone exploring either of these options. Quite
recently Josh Poimboeuf has pointed out that live patching, kprobes and
BPF would benefit from resolving some part of the disambiguation as
well but for other reasons. The function granularity KASLR (fgkaslr)
patches were mentioned but Joe Lawrence has clarified this effort has
been dropped with no clear solution in sight [1].
In the meantime removing module license tags from code which could never
be modules is welcomed for both objectives mentioned above. Some
developers have also welcomed these changes as it has helped clarify
when a module was never possible and they forgot to clean this up,
and so you'll see quite a bit of Nick's patches in other pull
requests for this merge window. I just picked up the stragglers after
rc3. LWN has good coverage on the motivation behind this work [2] and
the typical cross-tree issues he ran into along the way. The only
concrete blocker issue he ran into was that we should not remove the
MODULE_LICENSE() tags from files which have no SPDX tags yet, even if
they can never be modules. Nick ended up giving up on his efforts due
to having to do this vetting and backlash he ran into from folks who
really did *not understand* the core of the issue nor were providing
any alternative / guidance. I've gone through his changes and dropped
the patches which dropped the module license tags where an SPDX
license tag was missing, it only consisted of 11 drivers. To see
if a pull request deals with a file which lacks SPDX tags you
can just use:
./scripts/spdxcheck.py -f \
$(git diff --name-only commid-id | xargs echo)
You'll see a core module file in this pull request for the above,
but that's not related to his changes. WE just need to add the SPDX
license tag for the kernel/module/kmod.c file in the future but
it demonstrates the effectiveness of the script.
Most of Nick's changes were spread out through different trees,
and I just picked up the slack after rc3 for the last kernel was out.
Those changes have been in linux-next for over two weeks.
The cleanups, debug code I added and final fix I added for modules
were motivated by David Hildenbrand's report of boot failing on
a systems with over 400 CPUs when KASAN was enabled due to running
out of virtual memory space. Although the functional change only
consists of 3 lines in the patch "module: avoid allocation if module is
already present and ready", proving that this was the best we can
do on the modules side took quite a bit of effort and new debug code.
The initial cleanups I did on the modules side of things has been
in linux-next since around rc3 of the last kernel, the actual final
fix for and debug code however have only been in linux-next for about a
week or so but I think it is worth getting that code in for this merge
window as it does help fix / prove / evaluate the issues reported
with larger number of CPUs. Userspace is not yet fixed as it is taking
a bit of time for folks to understand the crux of the issue and find a
proper resolution. Worst come to worst, I have a kludge-of-concept [3]
of how to make kernel_read*() calls for modules unique / converge them,
but I'm currently inclined to just see if userspace can fix this
instead.
[0] https://lore.kernel.org/all/Y/kXDqW+7d71C4wz@bombadil.infradead.org/
[1] https://lkml.kernel.org/r/025f2151-ce7c-5630-9b90-98742c97ac65@redhat.com
[2] https://lwn.net/Articles/927569/
[3] https://lkml.kernel.org/r/20230414052840.1994456-3-mcgrof@kernel.org
-----BEGIN PGP SIGNATURE-----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=56WK
-----END PGP SIGNATURE-----
Merge tag 'modules-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull module updates from Luis Chamberlain:
"The summary of the changes for this pull requests is:
- Song Liu's new struct module_memory replacement
- Nick Alcock's MODULE_LICENSE() removal for non-modules
- My cleanups and enhancements to reduce the areas where we vmalloc
module memory for duplicates, and the respective debug code which
proves the remaining vmalloc pressure comes from userspace.
Most of the changes have been in linux-next for quite some time except
the minor fixes I made to check if a module was already loaded prior
to allocating the final module memory with vmalloc and the respective
debug code it introduces to help clarify the issue. Although the
functional change is small it is rather safe as it can only *help*
reduce vmalloc space for duplicates and is confirmed to fix a bootup
issue with over 400 CPUs with KASAN enabled. I don't expect stable
kernels to pick up that fix as the cleanups would have also had to
have been picked up. Folks on larger CPU systems with modules will
want to just upgrade if vmalloc space has been an issue on bootup.
Given the size of this request, here's some more elaborate details:
The functional change change in this pull request is the very first
patch from Song Liu which replaces the 'struct module_layout' with a
new 'struct module_memory'. The old data structure tried to put
together all types of supported module memory types in one data
structure, the new one abstracts the differences in memory types in a
module to allow each one to provide their own set of details. This
paves the way in the future so we can deal with them in a cleaner way.
If you look at changes they also provide a nice cleanup of how we
handle these different memory areas in a module. This change has been
in linux-next since before the merge window opened for v6.3 so to
provide more than a full kernel cycle of testing. It's a good thing as
quite a bit of fixes have been found for it.
Jason Baron then made dynamic debug a first class citizen module user
by using module notifier callbacks to allocate / remove module
specific dynamic debug information.
Nick Alcock has done quite a bit of work cross-tree to remove module
license tags from things which cannot possibly be module at my request
so to:
a) help him with his longer term tooling goals which require a
deterministic evaluation if a piece a symbol code could ever be
part of a module or not. But quite recently it is has been made
clear that tooling is not the only one that would benefit.
Disambiguating symbols also helps efforts such as live patching,
kprobes and BPF, but for other reasons and R&D on this area is
active with no clear solution in sight.
b) help us inch closer to the now generally accepted long term goal
of automating all the MODULE_LICENSE() tags from SPDX license tags
In so far as a) is concerned, although module license tags are a no-op
for non-modules, tools which would want create a mapping of possible
modules can only rely on the module license tag after the commit
8b41fc4454 ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf").
Nick has been working on this *for years* and AFAICT I was the only
one to suggest two alternatives to this approach for tooling. The
complexity in one of my suggested approaches lies in that we'd need a
possible-obj-m and a could-be-module which would check if the object
being built is part of any kconfig build which could ever lead to it
being part of a module, and if so define a new define
-DPOSSIBLE_MODULE [0].
A more obvious yet theoretical approach I've suggested would be to
have a tristate in kconfig imply the same new -DPOSSIBLE_MODULE as
well but that means getting kconfig symbol names mapping to modules
always, and I don't think that's the case today. I am not aware of
Nick or anyone exploring either of these options. Quite recently Josh
Poimboeuf has pointed out that live patching, kprobes and BPF would
benefit from resolving some part of the disambiguation as well but for
other reasons. The function granularity KASLR (fgkaslr) patches were
mentioned but Joe Lawrence has clarified this effort has been dropped
with no clear solution in sight [1].
In the meantime removing module license tags from code which could
never be modules is welcomed for both objectives mentioned above. Some
developers have also welcomed these changes as it has helped clarify
when a module was never possible and they forgot to clean this up, and
so you'll see quite a bit of Nick's patches in other pull requests for
this merge window. I just picked up the stragglers after rc3. LWN has
good coverage on the motivation behind this work [2] and the typical
cross-tree issues he ran into along the way. The only concrete blocker
issue he ran into was that we should not remove the MODULE_LICENSE()
tags from files which have no SPDX tags yet, even if they can never be
modules. Nick ended up giving up on his efforts due to having to do
this vetting and backlash he ran into from folks who really did *not
understand* the core of the issue nor were providing any alternative /
guidance. I've gone through his changes and dropped the patches which
dropped the module license tags where an SPDX license tag was missing,
it only consisted of 11 drivers. To see if a pull request deals with a
file which lacks SPDX tags you can just use:
./scripts/spdxcheck.py -f \
$(git diff --name-only commid-id | xargs echo)
You'll see a core module file in this pull request for the above, but
that's not related to his changes. WE just need to add the SPDX
license tag for the kernel/module/kmod.c file in the future but it
demonstrates the effectiveness of the script.
Most of Nick's changes were spread out through different trees, and I
just picked up the slack after rc3 for the last kernel was out. Those
changes have been in linux-next for over two weeks.
The cleanups, debug code I added and final fix I added for modules
were motivated by David Hildenbrand's report of boot failing on a
systems with over 400 CPUs when KASAN was enabled due to running out
of virtual memory space. Although the functional change only consists
of 3 lines in the patch "module: avoid allocation if module is already
present and ready", proving that this was the best we can do on the
modules side took quite a bit of effort and new debug code.
The initial cleanups I did on the modules side of things has been in
linux-next since around rc3 of the last kernel, the actual final fix
for and debug code however have only been in linux-next for about a
week or so but I think it is worth getting that code in for this merge
window as it does help fix / prove / evaluate the issues reported with
larger number of CPUs. Userspace is not yet fixed as it is taking a
bit of time for folks to understand the crux of the issue and find a
proper resolution. Worst come to worst, I have a kludge-of-concept [3]
of how to make kernel_read*() calls for modules unique / converge
them, but I'm currently inclined to just see if userspace can fix this
instead"
Link: https://lore.kernel.org/all/Y/kXDqW+7d71C4wz@bombadil.infradead.org/ [0]
Link: https://lkml.kernel.org/r/025f2151-ce7c-5630-9b90-98742c97ac65@redhat.com [1]
Link: https://lwn.net/Articles/927569/ [2]
Link: https://lkml.kernel.org/r/20230414052840.1994456-3-mcgrof@kernel.org [3]
* tag 'modules-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: (121 commits)
module: add debugging auto-load duplicate module support
module: stats: fix invalid_mod_bytes typo
module: remove use of uninitialized variable len
module: fix building stats for 32-bit targets
module: stats: include uapi/linux/module.h
module: avoid allocation if module is already present and ready
module: add debug stats to help identify memory pressure
module: extract patient module check into helper
modules/kmod: replace implementation with a semaphore
Change DEFINE_SEMAPHORE() to take a number argument
module: fix kmemleak annotations for non init ELF sections
module: Ignore L0 and rename is_arm_mapping_symbol()
module: Move is_arm_mapping_symbol() to module_symbol.h
module: Sync code of is_arm_mapping_symbol()
scripts/gdb: use mem instead of core_layout to get the module address
interconnect: remove module-related code
interconnect: remove MODULE_LICENSE in non-modules
zswap: remove MODULE_LICENSE in non-modules
zpool: remove MODULE_LICENSE in non-modules
x86/mm/dump_pagetables: remove MODULE_LICENSE in non-modules
...
Here is the large set of driver core changes for 6.4-rc1.
Once again, a busy development cycle, with lots of changes happening in
the driver core in the quest to be able to move "struct bus" and "struct
class" into read-only memory, a task now complete with these changes.
This will make the future rust interactions with the driver core more
"provably correct" as well as providing more obvious lifetime rules for
all busses and classes in the kernel.
The changes required for this did touch many individual classes and
busses as many callbacks were changed to take const * parameters
instead. All of these changes have been submitted to the various
subsystem maintainers, giving them plenty of time to review, and most of
them actually did so.
Other than those changes, included in here are a small set of other
things:
- kobject logging improvements
- cacheinfo improvements and updates
- obligatory fw_devlink updates and fixes
- documentation updates
- device property cleanups and const * changes
- firwmare loader dependency fixes.
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZEp7Sw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykitQCfamUHpxGcKOAGuLXMotXNakTEsxgAoIquENm5
LEGadNS38k5fs+73UaxV
=7K4B
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the large set of driver core changes for 6.4-rc1.
Once again, a busy development cycle, with lots of changes happening
in the driver core in the quest to be able to move "struct bus" and
"struct class" into read-only memory, a task now complete with these
changes.
This will make the future rust interactions with the driver core more
"provably correct" as well as providing more obvious lifetime rules
for all busses and classes in the kernel.
The changes required for this did touch many individual classes and
busses as many callbacks were changed to take const * parameters
instead. All of these changes have been submitted to the various
subsystem maintainers, giving them plenty of time to review, and most
of them actually did so.
Other than those changes, included in here are a small set of other
things:
- kobject logging improvements
- cacheinfo improvements and updates
- obligatory fw_devlink updates and fixes
- documentation updates
- device property cleanups and const * changes
- firwmare loader dependency fixes.
All of these have been in linux-next for a while with no reported
problems"
* tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits)
device property: make device_property functions take const device *
driver core: update comments in device_rename()
driver core: Don't require dynamic_debug for initcall_debug probe timing
firmware_loader: rework crypto dependencies
firmware_loader: Strip off \n from customized path
zram: fix up permission for the hot_add sysfs file
cacheinfo: Add use_arch[|_cache]_info field/function
arch_topology: Remove early cacheinfo error message if -ENOENT
cacheinfo: Check cache properties are present in DT
cacheinfo: Check sib_leaf in cache_leaves_are_shared()
cacheinfo: Allow early level detection when DT/ACPI info is missing/broken
cacheinfo: Add arm64 early level initializer implementation
cacheinfo: Add arch specific early level initializer
tty: make tty_class a static const structure
driver core: class: remove struct class_interface * from callbacks
driver core: class: mark the struct class in struct class_interface constant
driver core: class: make class_register() take a const *
driver core: class: mark class_release() as taking a const *
driver core: remove incorrect comment for device_create*
MIPS: vpe-cmp: remove module owner pointer from struct class usage.
...
Since commit 8b41fc4454 ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.
So remove it in the files in this commit, none of which can be built as
modules.
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: linux-modules@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: Kishon Vijay Abraham I <kishon@kernel.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: linux-phy@lists.infradead.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
DPHY RX module has a common module reset (RSTB_CMN) which is expected
to be released during configuration. In J721E SR1.0 the RSTB_CMN is
internally tied to CSI_RX_RST and is hardware controlled, for all
other newer platforms the common module reset is software controlled.
Add support to control common module reset during configuration and
also skip common module reset based on soc_device_match() for J721E SR1.0.
Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
Co-developed-by: Vaishnav Achath <vaishnav.a@ti.com>
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Reviewed-by: Jai Luthra <j-luthra@ti.com>
Link: https://lore.kernel.org/r/20230314073137.2153-1-vaishnav.a@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Enable full rate divider configuration support for J721E_WIZ_16G for SGMII.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20230309092434.443550-1-s-vadapalli@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
In the wiz_mode_select() function, the configuration performed for
PHY_TYPE_USXGMII is unreachable. Fix it.
Fixes: b64a85fb8f ("phy: ti: phy-j721e-wiz.c: Add usxgmii support in wiz driver")
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20230403094552.929108-1-s-vadapalli@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add register sequences for PCIe + SGMII PHY multilink configuration.
This has been validated on TI J7 platforms.
Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20230403085644.10187-1-sjakhade@cadence.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add support for the mediatek hdmi phy on MT8195 SoC
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
Link: https://lore.kernel.org/r/20220919-v8-3-a84c80468fe9@baylibre.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Some phys, such as mt8195, needs to have a configure callback defined.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
Link: https://lore.kernel.org/r/20220919-v8-2-a84c80468fe9@baylibre.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The tegra_xusb_port_unregister should be called when usb2_port
and ulpi_port map fails in tegra_xusb_add_usb2_port() or in
tegra_xusb_add_ulpi_port(), fix it.
Fixes: 53d2a715c2 ("phy: Add Tegra XUSB pad controller support")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20221129111634.1547747-1-cuigaosheng1@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
clang with W=1 reports
drivers/phy/rockchip/phy-rockchip-inno-dsidphy.c:284:36: error:
unused function 'hw_to_inno' [-Werror,-Wunused-function]
static inline struct inno_dsidphy *hw_to_inno(struct clk_hw *hw)
^
This function is not used so remove it.
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20230324132649.2649166-1-trix@redhat.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add QMP PHY config for sa8775p and add support for the new compatible.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20230411130446.401440-4-brgl@bgdev.pl
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The SDM845 QHP PHY doesn't have designated RX region. Corresponding RX
table is empty, so we can drop it completely.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230331151250.4049-2-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add the tables and constants for init sequences for UFS QMP phy found in
SM7150 SoC.
Signed-off-by: David Wronek <davidwronek@gmail.com>
Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230311231733.141806-3-danila@jiaxyga.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add support for RK3588 combo phy
This is based on prior work from XiaoDong Huang and
Peter Geis fixing this issue specifically for Rockchip 356x.
Co-developed-by: Andrew Powers-Holmes <aholmes@omnom.net>
Signed-off-by: Andrew Powers-Holmes <aholmes@omnom.net>
Signed-off-by: Lucas Tanure <lucas.tanure@collabora.com>
Link: https://lore.kernel.org/r/20230314135555.44162-4-lucas.tanure@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The PCIe PHY version used in SDX65 is v5.20 which has different register
offsets compared to the v5.0x and v4.0x PHYs. So separate register defines are
used for init sequence and PHY status.
Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
Link: https://lore.kernel.org/r/1679035114-19879-3-git-send-email-quic_rohiagar@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
clang with W=1 reports
drivers/phy/rockchip/phy-rockchip-pcie.c:122:19: error:
unused function 'phy_rd_cfg' [-Werror,-Wunused-function]
static inline u32 phy_rd_cfg(struct rockchip_pcie_phy *rk_phy,
^
This function is not used, so remove it.
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20230321122503.1783311-1-trix@redhat.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Replace the open-code with dev_err_probe() to simplify the code.
Signed-off-by: Ye Xingchen <ye.xingchen@zte.com.cn>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/202303231545522162256@zte.com.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
According to commit 7945f929f1 ("drivers: provide
devm_platform_ioremap_resource()"), convert platform_get_resource(),
devm_ioremap_resource() to a single call to use
devm_platform_ioremap_resource(), as this is exactly what this function
does.
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230323073534.75037-1-yang.lee@linux.alibaba.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The qmp_combo_offsets_v3 table is already used for v3 and v4 PHYs. Reuse
it for v6 too, dropping the separate qmp_combo_offsets_v6.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230323144726.1614344-2-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
SM8350 and SM8450 use qmp_combo_offsets_v3 table, which doesn't have
PCS_USB offset. Add the usb3_pcs_usb entry to program correct registers
while setting up sm8350 and sm8450 USB+DP combo PHYs.
Fixes: 05bd18348b ("phy: qcom-qmp-combo: Add config for SM6350")
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230323144726.1614344-1-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Rather than requesting the parent reference clocks for the sierra PHY PLLs
and then assigning the parents as a struct clk. Use the clk_parent_data
feature for the clock framework and only specify the firmware names of the
parent clocks.
The clock framework internally will then translate this to the actual
clocks. This allows to remove a bit of boilerplate code.
It also allows to only specify a single reference clock for both PLLs,
which is a valid use case. The clock framework can handle the case where
not all inputs for a clock mux are connected, while the custom
implementation in the driver could not.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20230326011416.363318-2-lars@metafoo.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The `devm_clk_register()` API is deprecated. Switch to
`devm_clk_hw_register()`.
Since the driver enables its own internal PLLs using the clock API we
still need to get a reference to the PLL clocks using the
`devm_clk_hw_get_clk()` API.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20230326011416.363318-1-lars@metafoo.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
SGMII is validated on kria KR260 robotics starter kit. So modify the
comment description to include it in supported controllers list.
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/1679940407-13131-1-git-send-email-radhey.shyam.pandey@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
An minimum udelay of 200 us seems to be necessary on some machines. After
the setup of the pll, which needs about 100 us to be locked there seem
to be additional 100 us to get the phy really functional. Without this
delay the usb runs not functional. With this additional short udelay
this issue was not reported again.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20230227151318.1894938-1-m.grzeschik@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The X-Gene PHY driver is unlikely to be useful on a kernel without general
X-Gene support enabled but currently only depends on arm64 rather than the
specific platform support. Narrow the dependency to ARCH_XGENE like we do
for other X-Gene specific drivers to ensure that users who have configured
down the set of platforms enabled don't see the option.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230221-phy-build-deps-v1-1-7091bcbd16b0@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add new registers programming in sleepwalk sequence for Tegra234:
MASTER_ENABLE_A/B/C/D in XUSB_AO_UTMIP_SLEEPWALK.
Signed-off-by: Henry Lin <henryl@nvidia.com>
Signed-off-by: Haotien Hsu <haotienh@nvidia.com>
Link: https://lore.kernel.org/r/20230309061708.4156383-1-haotienh@nvidia.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The driver can match only via the DT table so the table should be always
used and the of_match_ptr does not have any sense (this also allows ACPI
matching via PRP0001, even though it might not be relevant here). This
also fixes !CONFIG_OF error:
drivers/phy/st/phy-spear1310-miphy.c:172:34: error: ‘spear1310_miphy_of_match’ defined but not used [-Werror=unused-const-variable=]
drivers/phy/st/phy-spear1340-miphy.c:182:34: error: ‘spear1340_miphy_of_match’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230312132611.352654-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The driver can match only via the DT table so the table should be always
used and the of_match_ptr does not have any sense (this also allows ACPI
matching via PRP0001, even though it might not be relevant here). This
also fixes !CONFIG_OF error:
drivers/phy/marvell/phy-pxa-28nm-hsic.c:192:34: error: ‘mv_hsic_phy_dt_match’ defined but not used [-Werror=unused-const-variable=]
drivers/phy/marvell/phy-pxa-28nm-usb2.c:324:34: error: ‘mv_usbphy_dt_match’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230312132611.352654-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties. As
part of this, convert of_get_property/of_find_property calls to the
recently added of_property_present() helper when we just want to test
for presence of a property and nothing more.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20230310144720.1544600-1-robh@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230307115900.2293120-32-u.kleine-koenig@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230307115900.2293120-31-u.kleine-koenig@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230307115900.2293120-30-u.kleine-koenig@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230307115900.2293120-29-u.kleine-koenig@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230307115900.2293120-28-u.kleine-koenig@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230307115900.2293120-27-u.kleine-koenig@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230307115900.2293120-26-u.kleine-koenig@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230307115900.2293120-25-u.kleine-koenig@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230307115900.2293120-24-u.kleine-koenig@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20230307115900.2293120-23-u.kleine-koenig@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20230307115900.2293120-22-u.kleine-koenig@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20230307115900.2293120-21-u.kleine-koenig@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
