commit ff2b89de47 upstream.
When CONFIG_USB_OTG is not set, mxs_phy_is_otg_host() will always return
false. This behaviour is wrong. Since phy.last_event will always be set
for either host or device mode. Therefore, CONFIG_USB_OTG condition
can be removed.
Fixes: 5eda42aebb ("usb: phy: mxs: fix getting wrong state with mxs_phy_is_otg_host()")
cc: <stable@vger.kernel.org>
Acked-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20231228110753.1755756-3-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 71fee48fb7 upstream.
When offlining and onlining CPUs the overall reported idle and iowait
times as reported by /proc/stat jump backward and forward:
cpu 132 0 176 225249 47 6 6 21 0 0
cpu0 80 0 115 112575 33 3 4 18 0 0
cpu1 52 0 60 112673 13 3 1 2 0 0
cpu 133 0 177 226681 47 6 6 21 0 0
cpu0 80 0 116 113387 33 3 4 18 0 0
cpu 133 0 178 114431 33 6 6 21 0 0 <---- jump backward
cpu0 80 0 116 114247 33 3 4 18 0 0
cpu1 52 0 61 183 0 3 1 2 0 0 <---- idle + iowait start with 0
cpu 133 0 178 228956 47 6 6 21 0 0 <---- jump forward
cpu0 81 0 117 114929 33 3 4 18 0 0
Reason for this is that get_idle_time() in fs/proc/stat.c has different
sources for both values depending on if a CPU is online or offline:
- if a CPU is online the values may be taken from its per cpu
tick_cpu_sched structure
- if a CPU is offline the values are taken from its per cpu cpustat
structure
The problem is that the per cpu tick_cpu_sched structure is set to zero on
CPU offline. See tick_cancel_sched_timer() in kernel/time/tick-sched.c.
Therefore when a CPU is brought offline and online afterwards both its idle
and iowait sleeptime will be zero, causing a jump backward in total system
idle and iowait sleeptime. In a similar way if a CPU is then brought
offline again the total idle and iowait sleeptimes will jump forward.
It looks like this behavior was introduced with commit 4b0c0f294f
("tick: Cleanup NOHZ per cpu data on cpu down").
This was only noticed now on s390, since we switched to generic idle time
reporting with commit be76ea6144 ("s390/idle: remove arch_cpu_idle_time()
and corresponding code").
Fix this by preserving the values of idle_sleeptime and iowait_sleeptime
members of the per-cpu tick_sched structure on CPU hotplug.
Fixes: 4b0c0f294f ("tick: Cleanup NOHZ per cpu data on cpu down")
Reported-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20240115163555.1004144-1-hca@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9a9ab0d963 upstream.
Task A calls binder_update_page_range() to allocate and insert pages on
a remote address space from Task B. For this, Task A pins the remote mm
via mmget_not_zero() first. This can race with Task B do_exit() and the
final mmput() refcount decrement will come from Task A.
Task A | Task B
------------------+------------------
mmget_not_zero() |
| do_exit()
| exit_mm()
| mmput()
mmput() |
exit_mmap() |
remove_vma() |
fput() |
In this case, the work of ____fput() from Task B is queued up in Task A
as TWA_RESUME. So in theory, Task A returns to userspace and the cleanup
work gets executed. However, Task A instead sleep, waiting for a reply
from Task B that never comes (it's dead).
This means the binder_deferred_release() is blocked until an unrelated
binder event forces Task A to go back to userspace. All the associated
death notifications will also be delayed until then.
In order to fix this use mmput_async() that will schedule the work in
the corresponding mm->async_put_work WQ instead of Task A.
Fixes: 457b9a6f09 ("Staging: android: add binder driver")
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20231201172212.1813387-4-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c7ec4f2d68 upstream.
While frontends may submit zero-size requests (wasting a precious slot),
core networking code as of at least 3ece782693 ("sock: skb_copy_ubufs
support for compound pages") can't deal with SKBs when they have all
zero-size fragments. Respond to empty requests right when populating
fragments; all further processing is fragment based and hence won't
encounter these empty requests anymore.
In a way this should have been that way from the beginning: When no data
is to be transferred for a particular request, there's not even a point
in validating the respective grant ref. That's no different from e.g.
passing NULL into memcpy() when at the same time the size is 0.
This is XSA-448 / CVE-2023-46838.
Cc: stable@vger.kernel.org
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b1d65f717c upstream.
'vc_ctrl_req' is alloced in virtio_crypto_alg_skcipher_close_session(),
and should be freed in the invalid ctrl_status->status error handling
case. Otherwise there is a memory leak.
Fixes: 0756ad15b1 ("virtio-crypto: use private buffer for control request")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Message-Id: <20221114110740.537276-1-weiyongjun@huaweicloud.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Acked-by: zhenwei pi<pizhenwei@bytedance.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 50d6281ce9 upstream.
If CONFIG_DMA_DECLARE_COHERENT is not set,
make ARCH=x86_64 CROSS_COMPILE=x86_64-linux-gnu- will be failed, like this:
drivers/remoteproc/remoteproc_core.c: In function ‘rproc_rvdev_release’:
./include/linux/dma-map-ops.h:182:42: error: statement with no effect [-Werror=unused-value]
#define dma_release_coherent_memory(dev) (0)
^
drivers/remoteproc/remoteproc_core.c:464:2: note: in expansion of macro ‘dma_release_coherent_memory’
dma_release_coherent_memory(dev);
^~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
The return type of function dma_release_coherent_memory in CONFIG_DMA_DECLARE_COHERENT area is void, so in !CONFIG_DMA_DECLARE_COHERENT area it should neither return any value nor be defined as zero.
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: e61c451476 ("dma-mapping: Add dma_release_coherent_memory to DMA API")
Signed-off-by: Ren Zhijie <renzhijie2@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220630123528.251181-1-renzhijie2@huawei.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 58f65f9db7 upstream.
Barnabás reported that the change to skip the getid command
when the controller is in translated mode on laptops caused
the Version field of his "AT Translated Set 2 keyboard"
input device to change from ab83 to abba, breaking a custom
hwdb entry for this keyboard.
Use the standard ab83 id for keyboards when getid is skipped
(rather then that getid fails) to avoid reporting a different
Version to userspace then before skipping the getid.
Fixes: 936e4d49ec ("Input: atkbd - skip ATKBD_CMD_GETID in translated mode")
Reported-by: Barnabás Pőcze <pobrn@protonmail.com>
Closes: https://lore.kernel.org/linux-input/W1ydwoG2fYv85Z3C3yfDOJcVpilEvGge6UGa9kZh8zI2-qkHXp7WLnl2hSkFz63j-c7WupUWI5TLL6n7Lt8DjRuU-yJBwLYWrreb1hbnd6A=@protonmail.com/
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240116204325.7719-1-hdegoede@redhat.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c6d05e0762 upstream.
Each transaction is associated with a 'struct binder_buffer' that stores
the metadata about its buffer area. Since commit 74310e06be ("android:
binder: Move buffer out of area shared with user space") this struct is
no longer embedded within the buffer itself but is instead allocated on
the heap to prevent userspace access to this driver-exclusive info.
Unfortunately, the space of this struct is still being accounted for in
the total buffer size calculation, specifically for async transactions.
This results in an additional 104 bytes added to every async buffer
request, and this area is never used.
This wasted space can be substantial. If we consider the maximum mmap
buffer space of SZ_4M, the driver will reserve half of it for async
transactions, or 0x200000. This area should, in theory, accommodate up
to 262,144 buffers of the minimum 8-byte size. However, after adding
the extra 'sizeof(struct binder_buffer)', the total number of buffers
drops to only 18,724, which is a sad 7.14% of the actual capacity.
This patch fixes the buffer size calculation to enable the utilization
of the entire async buffer space. This is expected to reduce the number
of -ENOSPC errors that are seen on the field.
Fixes: 74310e06be ("android: binder: Move buffer out of area shared with user space")
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20231201172212.1813387-6-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3091c21d3e upstream.
Move the padding of 0-sized buffers to an earlier stage to account for
this round up during the alloc->free_async_space check.
Fixes: 74310e06be ("android: binder: Move buffer out of area shared with user space")
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20231201172212.1813387-5-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit acc657692a upstream.
Fix the size check added to dns_resolver_preparse() for the V1 server-list
header so that it doesn't give EINVAL if the size supplied is the same as
the size of the header struct (which should be valid).
This can be tested with:
echo -n -e '\0\0\01\xff\0\0' | keyctl padd dns_resolver desc @p
which will give "add_key: Invalid argument" without this fix.
Fixes: 1997b3cb42 ("keys, dns: Fix missing size check of V1 server-list header")
Reported-by: Pengfei Xu <pengfei.xu@intel.com>
Link: https://lore.kernel.org/r/ZZ4fyY4r3rqgZL+4@xpf.sh.intel.com/
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 727a92d62f upstream.
This is a follow up to:
commit b8e3a87a62 ("bpf: Add crosstask check to __bpf_get_stack").
This test ensures that the task iterator only gets a single
user stack (for the current task).
Signed-off-by: Jordan Rome <linux@jordanrome.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20231112023010.144675-1-linux@jordanrome.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 716089b417 ]
The expected result value for the call to of_count_phandle_with_args()
was updated from 7 to 8, but the accompanying error message was
forgotten.
Fixes: 4dde835698 ("of: Fix double free in of_parse_phandle_with_args_map")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240111085025.2073894-1-geert+renesas@glider.be
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4dde835698 ]
In of_parse_phandle_with_args_map() the inner loop that
iterates through the map entries calls of_node_put(new)
to free the reference acquired by the previous iteration
of the inner loop. This assumes that the value of "new" is
NULL on the first iteration of the inner loop.
Make sure that this is true in all iterations of the outer
loop by setting "new" to NULL after its value is assigned to "cur".
Extend the unittest to detect the double free and add an additional
test case that actually triggers this path.
Fixes: bd6f2fd5a1 ("of: Support parsing phandle argument lists through a nexus node")
Cc: Stephen Boyd <stephen.boyd@linaro.org>
Signed-off-by: "Christian A. Ehrhardt" <lk@c--e.de>
Link: https://lore.kernel.org/r/20231229105411.1603434-1-lk@c--e.de
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 516b3eb8c8 ]
The SMB2 Protocol requires that "The first byte of the Direct TCP
transport packet header MUST be zero (0x00)"[1]. Commit 1c1bcf2d3e
("ksmbd: validate smb request protocol id") removed the validation of
this 1-byte zero. Add the validation back now.
[1]: [MS-SMB2] - v20230227, page 30.
https://winprotocoldoc.blob.core.windows.net/productionwindowsarchives/MS-SMB2/%5bMS-SMB2%5d-230227.pdf
Fixes: 1c1bcf2d3e ("ksmbd: validate smb request protocol id")
Signed-off-by: Li Nan <linan122@huawei.com>
Acked-by: Tom Talpey <tom@talpey.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2f3be3ca77 ]
The hwmgr->backend, (i.e. data) allocated by kzalloc is not freed in
the error-handling paths of smu7_get_evv_voltages and
smu7_update_edc_leakage_table. However, it did be freed in the
error-handling of phm_initializa_dynamic_state_adjustment_rule_settings,
by smu7_hwmgr_backend_fini. So the lack of free in smu7_get_evv_voltages
and smu7_update_edc_leakage_table is considered a memleak in this patch.
Fixes: 599a7e9fe1 ("drm/amd/powerplay: implement smu7 hwmgr to manager asics with smu ip version 7.")
Fixes: 8f0804c6b7 ("drm/amd/pm: add edc leakage controller setting")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2f1888281e ]
The iser_reg_resources structure has two pointers to MR but only one
mr_valid field. The implementation assumes that we use only *sig_mr when
pi_enable is true. Otherwise, we use only *mr. However, it is only
sometimes correct. Read commands without protection information occur even
when pi_enble is true. For example, the following SCSI commands have a
Data-In buffer but never have protection information: READ CAPACITY (16),
INQUIRY, MODE SENSE(6), MAINTENANCE IN. So, we use
*sig_mr for some SCSI commands and *mr for the other SCSI commands.
In most cases, it works fine because the remote invalidation is applied.
However, there are two cases when the remote invalidation is not
applicable.
1. Small write commands when all data is sent as an immediate.
2. The target does not support the remote invalidation feature.
The lazy invalidation is used if the remote invalidation is impossible.
Since, at the lazy invalidation, we always invalidate the MR we want to
use, the wrong MR may be invalidated.
To fix the issue, we need a field per MR that indicates the MR needs
invalidation. Since the ib_mr structure already has such a field, let's
use ib_mr.need_inval instead of iser_reg_resources.mr_valid.
Fixes: b76a439982 ("IB/iser: Use IB_WR_REG_MR_INTEGRITY for PI handover")
Link: https://lore.kernel.org/r/20231219072311.40989-1-sergeygo@nvidia.com
Acked-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Sergey Gorenko <sergeygo@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 09f164d393 ]
The sdhci_omap is specific to older TI SoCs, update the
dependencies for those SoCs and compile testing. While we're
at it update the text to reflect the wider range of
supported TI SoCS the driver now supports.
Fixes: 7d326930d3 ("mmc: sdhci-omap: Add OMAP SDHCI driver")
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Link: https://lore.kernel.org/r/20231220135950.433588-2-pbrobinson@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cb052da7f0 ]
The sdhci_am654 is specific to recent TI SoCs, update the
dependencies for those SoCs and compile testing. While we're
at it update the text to reflect the wider range of
supported TI SoCS the driver now supports.
Fixes: 41fd4caeb0 ("mmc: sdhci_am654: Add Initial Support for AM654 SDHCI driver")
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Link: https://lore.kernel.org/r/20231220135950.433588-1-pbrobinson@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 04f8f05325 ]
Ensure the value passed to scarlett2_mixer_ctl_put() is between 0 and
SCARLETT2_MIXER_MAX_VALUE so we don't attempt to access outside
scarlett2_mixer_values[].
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Fixes: 9e4d5c1be2 ("ALSA: usb-audio: Scarlett Gen 2 mixer interface")
Link: https://lore.kernel.org/r/3b19fb3da641b587749b85fe1daa1b4e696c0c1b.1703001053.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 50603a67da ]
The *_ctl_get() functions which call scarlett2_update_*() were not
checking the return value. Fix to check the return value and pass to
the caller.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Fixes: 9e4d5c1be2 ("ALSA: usb-audio: Scarlett Gen 2 mixer interface")
Link: https://lore.kernel.org/r/32a5fdc83b05fa74e0fcdd672fbf71d75c5f0a6d.1703001053.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2190b9aea4 ]
Line outputs 3 & 4 on the Gen 3 18i8 are internally the analogue 7 and
8 outputs, and this renumbering is hidden from the user by
line_out_remap(). By allowing higher values (representing non-analogue
outputs) to be passed to line_out_remap(), repeated code from
scarlett2_mux_src_enum_ctl_get() and scarlett2_mux_src_enum_ctl_put()
can be removed.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/3b70267931f5994628ab27306c73cddd17b93c8f.1698342632.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Stable-dep-of: 50603a67da ("ALSA: scarlett2: Add missing error checks to *_ctl_get()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ca459dfa7d ]
scarlett2_usb_set_config() calls scarlett2_usb_get() but was not
checking the result. Return the error if it fails rather than
continuing with an invalid value.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Fixes: 9e15fae6c5 ("ALSA: usb-audio: scarlett2: Allow bit-level access to config")
Link: https://lore.kernel.org/r/def110c5c31dbdf0a7414d258838a0a31c0fab67.1703001053.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5f6ff6931a ]
scarlett2_config_save() was ignoring the return value from
scarlett2_usb(). As this function is not called from user-space we
can't return the error, so call usb_audio_err() instead.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Fixes: 9e4d5c1be2 ("ALSA: usb-audio: Scarlett Gen 2 mixer interface")
Link: https://lore.kernel.org/r/bf0a15332d852d7825fa6da87d2a0d9c0b702053.1703001053.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 51add1687f ]
dmi_platform_data[] first contains a DMI entry matching:
DMI_MATCH(DMI_PRODUCT_NAME, "EF20"),
and then contains an identical entry except for the match being:
DMI_MATCH(DMI_PRODUCT_NAME, "EF20EA"),
Since these are partial (non exact) DMI matches the first match
will also match any board with "EF20EA" in their DMI product-name,
drop the second, redundant, entry.
Fixes: a4dae468cf ("ASoC: rt5645: Add ACPI-defined GPIO for ECS EF20 series")
Cc: Chris Chiu <chiu@endlessos.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://msgid.link/r/20231126214024.300505-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 19f1016ea9 ]
Make the driver take over hardware state without disabling in .probe()
and enable the clock for each enabled channel.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
[ukleinek: split off from a patch that also implemented .get_state()]
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Fixes: 7edf736920 ("pwm: Add driver for STM32 plaftorm")
Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 41fa8f57c0 ]
Use hweight32() to count the CCxE bits in stm32_pwm_detect_channels().
Since the return value is assigned to chip.npwm, change it to unsigned
int as well.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Stable-dep-of: 19f1016ea9 ("pwm: stm32: Fix enable count for clk in .probe()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ee0cf5e07f ]
Add missing comma and remove extraneous NULL argument. The macro is
currently used by no one which explains why the typo slipped by.
Fixes: 2d34f09e79 ("clk: fixed-rate: Add support for specifying parents via DT/pointers")
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20231218-mbly-clk-v1-1-44ce54108f06@bootlin.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f5290d8e4f ]
Rewrite clk-asm9260 to use parent index to use the reference clock.
During this rework two helpers are added:
- clk_hw_register_mux_table_parent_data() to supplement
clk_hw_register_mux_table() but using parent_data instead of
parent_names
- clk_hw_register_fixed_rate_parent_accuracy() to be used instead of
directly calling __clk_hw_register_fixed_rate(). The later function is
an internal API, which is better not to be called directly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220916061740.87167-2-dmitry.baryshkov@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Stable-dep-of: ee0cf5e07f ("clk: fixed-rate: fix clk_hw_register_fixed_rate_with_accuracy_parent_hw")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5607068ae5 ]
regmap_bulk_write() return zero or negative error code, return the value
of regmap_bulk_write() rather than '0'.
Fixes: 3044a860fd ("clk: Add Si5341/Si5340 driver")
Acked-by: Mike Looijmans <mike.looijmans@topic.nl>
Signed-off-by: Su Hui <suhui@nfschina.com>
Link: https://lore.kernel.org/r/20231101031633.996124-1-suhui@nfschina.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c1a6edf3b5 ]
Call runtime_pm_put*() if watchdog is not already started during probe and re
enable it in watchdog start as required.
On K3 SoCs, watchdogs and their corresponding CPUs are under same
power-domain, so if the reference count of unused watchdogs aren't
dropped, it will lead to CPU hotplug failures as Device Management
firmware won't allow to turn off the power-domain due to dangling
reference count.
Fixes: 2d63908bdb ("watchdog: Add K3 RTI watchdog support")
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Tested-by: Manorit Chawdhry <m-chawdhry@ti.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20231213140110.938129-1-vigneshr@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f33f5b1fd1 ]
Users report about the unexpected behavior for setting timeouts above
15 sec on Raspberry Pi. According to watchdog-api.rst the ioctl
WDIOC_SETTIMEOUT shouldn't fail because of hardware limitations.
But looking at the code shows that max_timeout based on the
register value PM_WDOG_TIME_SET, which is the maximum.
Since 664a39236e ("watchdog: Introduce hardware maximum heartbeat
in watchdog core") the watchdog core is able to handle this problem.
This fix has been tested with watchdog-test from selftests.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217374
Fixes: 664a39236e ("watchdog: Introduce hardware maximum heartbeat in watchdog core")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20231112173251.4827-1-wahrenst@gmx.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dced0b3e51 ]
Avoid unnecessary crashes by claiming only NMIs that are due to
ERROR signalling or generated by the hpwdt hardware device.
The code does this, but only for iLO5.
The intent was to preserve legacy, Gen9 and earlier, semantics of
using hpwdt for error containtment as hardware/firmware would signal
fatal IO errors as an NMI with the expectation of hpwdt crashing
the system. Howerver, these IO errors should be received by hpwdt
as an NMI_IO_CHECK. So the test is overly permissive and should
not be limited to only ilo5.
We need to enable this protection for future iLOs not matching the
current PCI IDs.
Fixes: 62290a5c19 ("watchdog: hpwdt: Claim NMIs generated by iLO5")
Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20231213215340.495734-2-jerry.hoemann@hpe.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 38d7529774 ]
When the new watchdog character device is registered, it becomes
available for opening. This creates a race where userspace may open the
device before the character device's owner is set. This results in an
imbalance in module_get calls as the cdev_get in cdev_open will not
increment the reference count on the watchdog driver module.
This causes problems when the watchdog character device is released as
the module loader's reference will also be released. This makes it
impossible to open the watchdog device later on as it now appears that
the module is being unloaded. The open will fail with -ENXIO from
chrdev_open.
The legacy watchdog device will fail with -EBUSY from the try_module_get
in watchdog_open because it's module owner is the watchdog core module
so it can still be opened but it will fail to get a refcount on the
underlying watchdog device driver.
Fixes: 72139dfa24 ("watchdog: Fix the race between the release of watchdog_core_data and cdev")
Signed-off-by: Curtis Klein <curtis.klein@hpe.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20231205190522.55153-1-curtis.klein@hpe.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1fe15be1fb ]
Currently zynqmp divider round rate is considering single parent and
calculating rate and parent rate accordingly. But if divider clock flag
is set to SET_RATE_PARENT then its not trying to traverse through all
parent rate and not selecting best parent rate from that. So use common
divider_round_rate() which is traversing through all clock parents and
its rate and calculating proper parent rate.
Fixes: 3fde0e16d0 ("drivers: clk: Add ZynqMP clock driver")
Signed-off-by: Jay Buddhabhatti <jay.buddhabhatti@amd.com>
Link: https://lore.kernel.org/r/20231129112916.23125-3-jay.buddhabhatti@amd.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b782921ddd ]
Currently zynqmp clock driver is not calculating closest mux rate and
because of that Linux is not setting proper frequency for CPU and
not able to set given frequency for dynamic frequency scaling.
E.g., In current logic initial acpu clock parent and frequency as below
apll1 0 0 0 2199999978 0 0 50000 Y
acpu0_mux 0 0 0 2199999978 0 0 50000 Y
acpu0_idiv1 0 0 0 2199999978 0 0 50000 Y
acpu0 0 0 0 2199999978 0 0 50000 Y
After changing acpu frequency to 549999994 Hz using CPU freq scaling its
selecting incorrect parent which is not closest frequency.
rpll_to_xpd 0 0 0 1599999984 0 0 50000 Y
acpu0_mux 0 0 0 1599999984 0 0 50000 Y
acpu0_div1 0 0 0 533333328 0 0 50000 Y
acpu0 0 0 0 533333328 0 0 50000 Y
Parent should remain same since 549999994 = 2199999978 / 4.
So use __clk_mux_determine_rate_closest() generic function to calculate
closest rate for mux clock. After this change its selecting correct
parent and correct clock rate.
apll1 0 0 0 2199999978 0 0 50000 Y
acpu0_mux 0 0 0 2199999978 0 0 50000 Y
acpu0_div1 0 0 0 549999995 0 0 50000 Y
acpu0 0 0 0 549999995 0 0 50000 Y
Fixes: 3fde0e16d0 ("drivers: clk: Add ZynqMP clock driver")
Signed-off-by: Jay Buddhabhatti <jay.buddhabhatti@amd.com>
Link: https://lore.kernel.org/r/20231129112916.23125-2-jay.buddhabhatti@amd.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 71f130c919 ]
When the driver was ported upstream, PLL test_ctl_hi1 register value
was omitted. Add it to ensure the PLLs are fully configured.
Fixes: 5658e8cf1a ("clk: qcom: add video clock controller driver for SM8150")
Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231201-videocc-8150-v3-3-56bec3a5e443@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3185f96968 ]
Add all the available resets for the video clock controller
on sm8150.
Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231201-videocc-8150-v3-1-56bec3a5e443@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Stable-dep-of: 1fd9a939db ("clk: qcom: videocc-sm8150: Update the videocc resets")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c2709b2d6a ]
When radeon_bo_create and radeon_vm_clear_bo fail, the vm->page_tables
allocated before need to be freed. However, neither radeon_vm_init
itself nor its caller have done such deallocation.
Fixes: 6d2f2944e9 ("drm/radeon: use normal BOs for the page tables v4")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 28dd788382 ]
When ps allocated by kzalloc equals to NULL, kv_parse_power_table
frees adev->pm.dpm.ps that allocated before. However, after the control
flow goes through the following call chains:
kv_parse_power_table
|-> kv_dpm_init
|-> kv_dpm_sw_init
|-> kv_dpm_fini
The adev->pm.dpm.ps is used in the for loop of kv_dpm_fini after its
first free in kv_parse_power_table and causes a use-after-free bug.
Fixes: a2e73f56fa ("drm/amdgpu: Add support for CIK parts")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ac16667237 ]
When the allocation of
adev->pm.dpm.dyn_state.vddc_dependency_on_dispclk.entries fails,
amdgpu_free_extended_power_table is called to free some fields of adev.
However, when the control flow returns to si_dpm_sw_init, it goes to
label dpm_failed and calls si_dpm_fini, which calls
amdgpu_free_extended_power_table again and free those fields again. Thus
a double-free is triggered.
Fixes: 841686df9f ("drm/amdgpu: add SI DPM support (v4)")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit afe58346d5 ]
Should be -EOPNOTSUPP.
Fixes: 5104fdf50d ("drm/amdgpu: Fix a null pointer access when the smc_rreg pointer is NULL")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5b2f885e2f ]
If an error occurs after a successful i2c_mux_add_adapter(), then
i2c_mux_del_adapters() should be called to free some resources, as
already done in the remove function.
Fixes: e6089feca4 ("media: m88ds3103: Add support for ds3103b demod")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ccf7cf9237 ]
Pass in the original position and count rather than the position and
count that were updated by the write. Also use the correct types for
all arguments, in particular the file offset which was being truncated
to 32 bits on 32-bit platforms.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Stable-dep-of: bb34cc6ca8 ("f2fs: fix to update iostat correctly in f2fs_filemap_fault()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bb34cc6ca8 ]
In f2fs_filemap_fault(), it fixes to update iostat info only if
VM_FAULT_LOCKED is tagged in return value of filemap_fault().
Fixes: 8b83ac81f4 ("f2fs: support read iostat")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
