After perf record finishes, it prints file size and number of samples in
the file but this info is wrong since it assumes typical sample size of
24 bytes and divides file size by the value.
However as we post-process recorded samples for build-id, it can show
correct number like below. If build-id post-processing is not requested
just omit the wrong number of samples.
$ perf record noploop 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.159 MB perf.data (3989 samples) ]
$ perf report --stdio -n
# To display the perf.data header info, please use --header/--header-only options.
#
# Samples: 3K of event 'cycles'
# Event count (approx.): 3771330663
#
# Overhead Samples Command Shared Object Symbol
# ........ ............ ....... ................ ..........................
#
99.90% 3982 noploop noploop [.] main
0.09% 1 noploop ld-2.17.so [.] _dl_check_map_versions
0.01% 1 noploop [kernel.vmlinux] [k] setup_arg_pages
0.00% 5 noploop [kernel.vmlinux] [k] intel_pmu_enable_all
Reported-by: Milian Wolff <mail@milianw.de>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1422518843-25818-4-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It's only used for perf record to process build-id because its file size
it's not fixed at this time due to remaining header features.
However data offset and size is available so that we can use the
perf_session__process_events() once we set the file size as the current
offset like for now.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1422518843-25818-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When libunwind tries to resolve callchains it needs to know the offset
of .eh_frame_hdr or .debug_frame to access the dso.
Since it will always return the same result for a given DSO, just cache
the result as an optimization.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1422518843-25818-41-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
uClibc Linuxthreads.old doesn't support the pthread_attr_setaffinity_np()
functioo:
----------------->8-----------------------
CC bench/futex-hash.o
CC bench/futex-wake.o
bench/futex-hash.c: In function 'bench_futex_hash':
bench/futex-hash.c:161:3: error: implicit declaration of function
'pthread_attr_setaffinity_np' [-Werror=implicit-function-declaration]
ret = pthread_attr_setaffinity_np(&thread_attr, sizeof(cpu_set_t),
&cpu);
^
bench/futex-hash.c:161:3: error: nested extern declaration of
'pthread_attr_setaffinity_np' [-Werror=nested-externs]
----------------->8-----------------------
So introduce a test to check that and if not available provide a stub.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1421156604-30603-6-git-send-email-vgupta@synopsys.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When running perf on ARC (uClibc based userspace), ran into this issue
------------->8----------------
[ARCLinux]$ ./perf record ls
bin etc perf sys
debug init perf.data tmp
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.001 MB perf.data (~24 samples) ]
[ARCLinux]$ ./perf report
incompatible file format (rerun with -v to learn more)
------------->8----------------
The problem happens in the following call stack when zalloc is called
with size zero
glibc default / uClibc with MALLOC_GLIBC_COMPAT are OK, but not if that
config option is not enabled.
cmd_report
perf_session__new
perf_session__open
perf_session__read_header
read_attr(fd, header, &f_attr)
nr_ids = f_attr.ids.size / sizeof(u64); <-- 0
perf_evsel__alloc_id(vsel, 1, nr_ids)
zalloc(ncpus * nthreads * sizeof(u64)) <-- 0
header.c: read_attr()
(gdb) p *f_attr
$17 = {
attr = {
type = 0,
size = 96,
config = 0,
{
sample_period = 4000,
sample_freq = 4000
},
...
ids = {
offset = 104,
size = 0 <------
}
}
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Suggested-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1421156604-30603-5-git-send-email-vgupta@synopsys.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The new hw_breakpoint bits are now ready for v3.20, merge them
into the main branch, to avoid conflicts.
Conflicts:
tools/perf/Documentation/perf-record.txt
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When perf exits with some error it shows the error message with
ui__error() or ui__warning() and then calls ui__exit() during
exit_browser().
On TUI, it then shows a window titled "Fatal Error" to inform user a
last message which might be related with this condition. However it
sometimes contains no message and just annoyes users.
The usual case for this is running perf top as normal user. (And
/proc/sys/kernel/perf_event_paranoid being 1).
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1421736050-5283-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It was testing the same buffer for differences:
memcmp(s1->user_stack.data, s1->user_stack.data, s1->user_stack.size)
I'm pretty sure this wasn't supposed to be dead code.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1421946083-29863-1-git-send-email-linux@rasmusvillemoes.dk
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There will be other cases where not just a tracepoint event is being
opened below the debugfs mountpoint, but it is rather common, so provide
one helper for that.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-q6e6zct49ql6nbcw8kkg0lbj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In that case the only failure possible is not to have enough memory, as
we are just creating the evsels, not trying to access any system
facility such as debugfs files or syscalls.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-7k6asvfhiwiu2zs6o2oknchk@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It was hardcoded for one specific tracepoint, leftover from its initial
user: 'perf trace'.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-j1jicvwljy5qx1nah4mkmyke@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As this is not specific to an evlist and may be used with other tools.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-a9up9mivx1pzdf5tqrqsx62d@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
tools/perf/util/include/asm/hash.h
The prior change fixes default output ordering with each column but it
breaks -o/--order option. This patch prepends a new hpp fmt struct to
sort list but not to output field list so that it can affect ordering
without adding a new output column.
The new hpp fmt uses its own compare functions which treats dummy
entries (which have no baseline) little differently - the delta field
can be computed without baseline but others (ratio and wdiff) are not.
The new output will look like below:
$ perf diff -o 2 perf.data.{old,cur,new}
...
# Baseline/0 Delta/1 Delta/2 Shared Object Symbol
# .......... ....... ....... ................. ..........................................
22.98% +0.51% +0.52% libc-2.20.so [.] _int_malloc
5.70% +0.28% +0.30% libc-2.20.so [.] free
4.38% -0.21% +0.25% a.out [.] main
1.32% -0.15% +0.05% a.out [.] free@plt
+0.01% [kernel.kallsyms] [k] intel_pstate_timer_func
+0.01% [kernel.kallsyms] [k] _raw_spin_lock_irqsave
+0.01% [kernel.kallsyms] [k] timekeeping_update.constprop.8
+0.01% +0.01% [kernel.kallsyms] [k] apic_timer_interrupt
0.01% -0.00% [kernel.kallsyms] [k] native_read_msr_safe
0.01% -0.01% -0.01% [kernel.kallsyms] [k] native_write_msr_safe
1.31% +0.03% -0.06% a.out [.] malloc@plt
31.50% -0.74% -0.23% libc-2.20.so [.] _int_free
32.75% +0.28% -0.83% libc-2.20.so [.] malloc
0.01% [kernel.kallsyms] [k] scheduler_tick
+0.01% [kernel.kallsyms] [k] read_tsc
+0.01% [kernel.kallsyms] [k] perf_adjust_freq_unthr_context.part.82
In above example, the output was sorted by 'Delta/2' column first, and
then 'Baseline/0' and finally 'Delta/1'.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1420677949-6719-8-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently ->cmp, ->collapse and ->sort callbacks doesn't pass
corresponding fmt. But it'll be needed by upcoming changes in
perf diff command.
Suggested-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1420677949-6719-6-git-send-email-namhyung@kernel.org
[ fix build by passing perf_hpp_fmt pointer to hist_entry__cmp_ methods ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The fmt_to_data_file() is to retrieve struct data__file from
perf_hpp_fmt which is embedded in diff_hpp_fmt. It'll be used by sort
callback functions later.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1420677949-6719-5-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Current perf diff result is somewhat confusing since it sometimes hide
small result and sometimes there's no result. So do not hide small
result (less than 0.01%) and print "N/A" if baseline is not
recorded (for ratio and wdiff only). Blank means the baseline is
available but its pairs are not.
Before:
# Baseline Delta Shared Object Symbol
# ........ ....... ................. .........................
#
...
0.01% -0.01% [kernel.kallsyms] [k] native_write_msr_safe
0.01% [kernel.kallsyms] [k] scheduler_tick
0.01% [kernel.kallsyms] [k] native_read_msr_safe
0.00% [kernel.kallsyms] [k] __rcu_read_unlock
[kernel.kallsyms] [k] _raw_spin_lock
+0.01% [kernel.kallsyms] [k] apic_timer_interrupt
[kernel.kallsyms] [k] read_tsc
After:
# Baseline Delta Shared Object Symbol
# ........ ....... ................. .........................
#
...
0.01% -0.01% [kernel.kallsyms] [k] native_write_msr_safe
0.01% [kernel.kallsyms] [k] scheduler_tick
0.01% [kernel.kallsyms] [k] native_read_msr_safe
0.00% [kernel.kallsyms] [k] __rcu_read_unlock
+0.01% [kernel.kallsyms] [k] _raw_spin_lock
+0.01% [kernel.kallsyms] [k] apic_timer_interrupt
+0.01% [kernel.kallsyms] [k] read_tsc
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1419656793-32756-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The hists__compute_resort() is to sort output fields based on the
given field/criteria. This was done without the sort list but as we
added the field to the sort list, we can do it with normal
hists__output_resort() using the ->sort callback.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1419656793-32756-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The exclusive options are to prohibit use of conflicting options at the
same time. But it had a side effect that it also limits a such option
can be used at most once. Currently the only user of the flag is perf
probe and it allows to use such options more than once, but when one
tries to use it, perf will fail like below:
$ sudo perf probe -x /lib/libc-2.20.so --add malloc --add free
Error: option `add' cannot be used with add
...
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1420886028-15135-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This causes `perf list pmu` to show parameters for parameterized events
like:
pmu/event_name,param1=?,param2=?/ [Kernel PMU event]
An example:
hv_24x7/HPM_TLBIE__PHYS_CORE,core=?/ [Kernel PMU event]
Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Cody P Schafer <dev@codyps.com>
Cc: Haren Myneni <hbabu@us.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1420679633-28856-3-git-send-email-sukadev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Removes some functions that are not used anywhere:
color_parse_mem()
color_parse()
This was partially found by using a static code analysis program called cppcheck.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ramkumar Ramachandra <artagnon@gmail.com>
Link: http://lkml.kernel.org/r/1419079865-354-1-git-send-email-rickard_strandqvist@spectrumdigital.se
[ Remove now unused parse_{attr,color} routines too ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The report__inc_stat() function collects the number of hist entries in
the session in order to calculate the max size of the progess bar.
It'd be better if it does it during the addition of hist entries so that
it can be used by other places too.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1419223455-4362-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The code being used when decaying and deleting entries from a hists
instance was the same, provide a function to avoid code dup.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-j6ideab7lkakavfvfguw858z@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
No logic changes, just to be consistent.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-f7n5y0mvk6gew5185h6fg316@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Just like the other parameters, grouping it on the builtin-mem specific
config area: struct perf_mem.
Acked-by: Stephane Eranian <eranian@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Fowles <rfowles@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ad8ns5l51ongemfsir3zy09x@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch modifies perf mem to default to sampling loads and stores
simultaneously. It could only do one or the other before yet there was
no hardware restriction preventing simultaneous collection. With this
patch, one run is sufficient to collect both.
It is still possible to sample only loads or stores by using the
-t option:
$ perf mem -t load rec
$ perf mem -t load rep
Or
$ perf mem -t store rec
$ perf mem -t store rep
The perf report TUI will show one event at a time. The store output will
contain a Weight column which will be empty.
In V2, we updated the man pages to reflect the change and also simplify
the initialization of the argv vector passed to the cmd_*() functions as
per LKML feedback.
In V3, we fixed typos in the changelog.
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Fowles <rfowles@redhat.com>
Link: http://lkml.kernel.org/r/20141217152355.GA10053@thinkpad
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The commit dfef99cd0b ("perf probe: Use ref_reloc_sym based address
instead of the symbol name") converts kprobes to use ref_reloc_sym (i.e.
_stext) and offset instead of using symbol's name directly. So on my
system, adding do_fork ends up with like below:
$ sudo perf probe -v --add do_fork%return
probe-definition(0): do_fork%return
symbol:do_fork file:(null) line:0 offset:0 return:1 lazy:(null)
0 arguments
Looking at the vmlinux_path (7 entries long)
Using /lib/modules/3.17.6-1-ARCH/build/vmlinux for symbols
Could not open debuginfo. Try to use symbols.
Opening /sys/kernel/debug/tracing/kprobe_events write=1
Added new event:
Writing event: r:probe/do_fork _stext+456136
Failed to write event: Invalid argument
Error: Failed to add events. Reason: Operation not permitted (Code: -1)
As you can see, the do_fork was translated to _stext+456136. This was
because to support (local) symbols that have same name. But the problem
is that kretprobe requires to be inserted at function start point so it
simply checks whether it's called with offset 0. And if not, it'll
return with -EINVAL. You can see it with dmesg.
$ dmesg | tail -1
[125621.764103] Return probe must be used without offset.
So we need to use the symbol name instead of ref_reloc_sym in case of
return probes.
Reported-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/1421234288-22758-4-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Removing boilerplate from two places, where one would have to find the
first entry, then iterate using symbol__next_by_name + strcmp to see if
the next member had the same name.
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Link: http://lkml.kernel.org/n/tip-eh73z8gthv20yowirmx2yk38@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The find_probe_trace_events_from_map() searches matching symbol from a
map (so from a backing dso). For uprobes, it'll create a new map (and
dso) and loads it using a filter. It's a little bit inefficient in that
it'll read out the symbol table everytime but works well anyway.
For kprobes however, it'll reuse existing kernel map which might be
loaded before. In this case map__load() just returns with no result.
It makes kprobes always failed to find symbol even if it exists in the
map (dso).
To fix it, use map__find_symbol_by_name() instead. It'll load a map
with full symbols and sorts them by name. It needs to search sibing
nodes since there can be multiple (local) symbols with same name.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Link: http://lkml.kernel.org/r/1421234288-22758-3-git-send-email-namhyung@kernel.org
[ Use symbol__next_by_name ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Given a symbol, go to the next entry in a rbtree sorted by symbol name.
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Link: http://lkml.kernel.org/n/tip-aq210drxprnu2so4dye5xa3j@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When a dso contains multiple symbols which have same name, current
dso__find_symbol_by_name() only finds an one of them and there's no way
to get the all symbols without going through the rbtree.
So make symbols__find_by_name() return the first entry with the given
name and the next patch in this series will provide a way to iterate
from there, by the name ordered rb_tree, till a suitable symbol is
found.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Link: http://lkml.kernel.org/r/1421234288-22758-2-git-send-email-namhyung@kernel.org
[ Yanked this independent hunk, without changes, from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The lock prefix handling fails to free the strdup()'d name as well as
the fields allocated by the instruction parsing.
Signed-off-by: Rabin Vincent <rabin@rab.in>
Cc: Paul Mackerras <paulus@samba.org>
Link: http://lkml.kernel.org/r/1421607621-15005-2-git-send-email-rabin@rab.in
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Don't use the ins's ->sncprintf() if the parsing failed.
For example, this fixes the display of "imul %edx". Without this patch:
| imul (null),(null)
After this patch:
| imul %edx
Signed-off-by: Rabin Vincent <rabin@rab.in>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1421607621-15005-1-git-send-email-rabin@rab.in
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When building perf for arm64 I hit a warning (and be treated as an
error) like below:
aarch64-oe-linux-gcc -o .../scripts/perl/Perf-Trace-Util/Context.o -c -Wbad-function-cast \
... scripts/perl/Perf-Trace-Util/Context.c
In file included from .../usr/lib64/perl/5.14.3/CORE/perl.h:2464:0,
from Context.xs:23:
/.../usr/lib64/perl/5.14.3/CORE/handy.h:108:0: error: "bool" redefined [-Werror]
# define bool char
^
In file included from /.../usr/src/kernel/tools/include/linux/types.h:4:0,
from /.../usr/src/kernel/arch/arm64/include/uapi/asm/sigcontext.h:19,
from /.../usr/include/bits/sigcontext.h:27,
from /.../usr/include/signal.h:340,
from /.../usr/include/sys/param.h:28,
from /.../usr/lib64/perl/5.14.3/CORE/perl.h:678,
from Context.xs:23:
/.../usr/lib/aarch64-oe-linux/gcc/aarch64-oe-linux/4.9.2/include/stdbool.h:33:0: note: this is the location of the previous definition
#define bool _Bool
Looks like the failure is caused by arm64 uapi/asm/sigcontext.h, which
includes linux/types.h while other archs not.
Current perl consider this problem:
http://perl5.git.perl.org/perl.git/commit/bd31be4baa3ee68abdb92c0db3200efe0fad903b
However there are users which use old version of perl.
This patch includes stdbool.h before Context.xs and define HAS_BOOL to
prevent perl'e headers define its own 'bool'. Code is learn from perl's
git tree.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Link: http://lkml.kernel.org/r/1421671397-4659-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
dwfl_report_offline() works only when libraries are prelinked.
Replace dwfl_report_offline() with dwfl_report_elf() so we correctly
extract debug info even from libraries that are not prelinked.
Reported-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Link: http://lkml.kernel.org/r/20150114221045.GA17703@us.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently the symbol structure is allocated with symbol_conf.priv_size
to carry sideband information like annotation, map browser on TUI and
sort-by-name tree node. So retrieving these information from symbol
needs to care about the details of such placement.
However the annotation code just assumes that the symbol is placed after
the struct annotation. But actually there's other info between them.
So accessing those struct will lead to an undefined behavior (usually a
crash) after they write their info to the same location.
To reproduce the problem, please follow the steps below:
1. run perf report (TUI of course) with -v option
2. open map browser (by pressing right arrow key for any entry)
3. search any function (by pressing '/' key and input whatever..)
4. return to the hist browser (by pressing 'q' or left arrow key)
5. open annotation window for the same entry (by pressing 'a' key)
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1421234288-22758-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Perf tool fails to unwind user stack if the event raises in a shared
object. This patch improves tests/dwarf-unwind.c to demonstrate the
problem by utilizing commonly used glibc function "bsearch". If perf is
not statically linked, the testcase will try to unwind a mixed call
trace.
By debugging libunwind I found that there is a bug in unwind-libunwind:
it always passes 0 as segbase to libunwind, cause libunwind unable to
locate debug_frame entry fir first level ip address (I add some more
debugging output into libunwind to make things clear):
>_Uarm_dwarf_find_debug_frame: start_ip = 10be98, end_ip = 10c2a4
>_Uarm_dwarf_find_debug_frame: found debug_frame table `/lib/libc-2.18.so': segbase=0x0, len=7, gp=0x0, table_data=0x449388
>_Uarm_dwarf_search_unwind_table: call lookup:ip = b6cd3bcc, segbase = 0, rel_ip = b6cd3bcc
>lookup: e->start_ip_offset = bcf18 (rel_ip = b6cd3bcc)
>lookup: e->start_ip_offset = 6d314 (rel_ip = b6cd3bcc)
>lookup: e->start_ip_offset = 33d0c (rel_ip = b6cd3bcc)
...
>lookup: e->start_ip_offset = 15d0c (rel_ip = b6cd3bcc)
>lookup: e->start_ip_offset = 15c40 (rel_ip = b6cd3bcc)
>_Uarm_dwarf_search_unwind_table: IP b6cd3bcc inside range b6c12000-b6d4c000, but no explicit unwind info found
>put_rs_cache: unmasking signals/interrupts and releasing lock
>_Uarm_dwarf_step: returning -10
>_Uarm_step: dwarf_step()=-10
This patch passes map->start as segbase to dwarf_find_debug_frame(), so
di will be initialized correctly.
In addition, dso and executable are different when setting segbase. This
patch first check whether the elf is executable, and pass segbase only
for shared object.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1421203007-75799-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is due to duplicated unistd inclusion (via uClibc headers + kernel headers)
Also seen on ARM uClibc based tools
------- ARC build ---------->8-------------
CC util/evlist.o
In file included from
~/arc/k.org/arch/arc/include/uapi/asm/unistd.h:25:0,
from util/../perf-sys.h:10,
from util/../perf.h:15,
from util/event.h:7,
from util/event.c:3:
~/arc/k.org/include/uapi/asm-generic/unistd.h:906:0:
warning: "__NR_fcntl64" redefined [enabled by default]
#define __NR_fcntl64 __NR3264_fcntl
^
In file included from
~/arc/gnu/INSTALL_1412-arc-2014.12-rc1/arc-snps-linux-uclibc/sysroot/usr/include/sys/syscall.h:24:0,
from util/../perf-sys.h:6,
----------------->8-------------------
------- ARM build ---------->8-------------
CC FPIC plugin_scsi.o
In file included from util/../perf-sys.h:9:0,
from util/../perf.h:15,
from util/cache.h:7,
from perf.c:12:
~/arc/k.org/arch/arm/include/uapi/asm/unistd.h:28:0:
warning: "__NR_restart_syscall" redefined [enabled by default]
In file included from
~/buildroot/host/usr/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/include/sys/syscall.h:25:0,
from util/../perf-sys.h:6,
from util/../perf.h:15,
from util/cache.h:7,
from perf.c:12:
~/buildroot/host/usr/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/include/bits/sysnum.h:17:0:
note: this is the location of the previous definition
----------------->8-------------------
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Cc: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1421156604-30603-4-git-send-email-vgupta@synopsys.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
----------------->8------------------
CC bench/sched-pipe.o
In file included from builtin-annotate.c:13:0:
util/cache.h:76:15: warning: redundant redeclaration of 'strlcpy'
[-Wredundant-decls]
extern size_t strlcpy(char *dest, const char *src, size_t size);
^
In file included from util/util.h:55:0,
from builtin.h:4,
from builtin-annotate.c:8:
~/vineetg/arc/gnu/INSTALL_1412-arc-2014.12-rc1/arc-snps-linux-uclibc/sysroot/usr/include/string.h:396:15:
note: previous declaration of 'strlcpy' was here
extern size_t strlcpy(char *__restrict dst, const char *__restrict src,
----------------->8------------------
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Cc: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1421156604-30603-3-git-send-email-vgupta@synopsys.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We need to use lib/hweight.c for that, just like we do for lib/rbtree.c,
so tools need to link hweight.o. For now do it directly, but we need to
have a tools/lib/lk.a or .so that collects these goodies...
Reported-by: Jan Beulich <JBeulich@suse.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-a1e91dx3apzqw5kbdt7ut21s@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When thread__init_map_groups() fails, a new thread should be removed
from the rbtree since it's gonna be freed. Also update last match cache
only if the function succeeded.
Reported-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1420763892-15535-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When build with 'make ARCH=x86' and dwarf unwind is on, there is a
compiling error:
CC /home/wn/perf/arch/x86/util/unwind-libdw.o
CC /home/wn/perf/arch/x86/tests/regs_load.o
arch/x86/tests/regs_load.S: Assembler messages:
arch/x86/tests/regs_load.S:65: Error: operand type mismatch for `push'
arch/x86/tests/regs_load.S:72: Error: operand type mismatch for `pop'
make[1]: *** [/home/wn/perf/arch/x86/tests/regs_load.o] Error 1
make[1]: INTERNAL: Exiting with 25 jobserver tokens available; should be 24!
make: *** [all] Error 2
...
Which is caused by incorrectly undefine macro HAVE_ARCH_X86_64_SUPPORT.
'config/Makefile.arch' tests __x86_64__ only when 'ARCH=x86_64'.
However, when building x86_64 kernel, ARCH=x86 is valid and commonly
used. Build systems, such as yocto, uses x86_64 compiler with 'ARCH=x86'
to build x86_64 perf, which causes mismatching.
As __LP64__ is defined for x86_64 as well, we can consolidate the
__x86_64__ check to the __LP64__ check and get rid of the IS_X86_64
IMHO.
(This patch is made by Namhyung Kim when replying my v1 patch:
https://lkml.org/lkml/2015/1/7/17
I modified the code to remove dependency on RAW_ARCH:
https://lkml.org/lkml/2015/1/7/865
Namhyung Kim didn't provide his SOB in his original email. I add
mine only for my modification.)
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1421029255-23039-1-git-send-email-wangnan0@huawei.com
[ Namhyung provided his S-o-B on a followup to this patch thread on lkml ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When it failed to write probe commands to the probe_event file in
debugfs, it needs to propagate the error code properly. Current code
blindly uses the return value of the write(2) so it always uses
-1 (-EPERM) and it might confuse users.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1420886028-15135-4-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When perf report on TUI shows callchain it checks first node has
siblings to determine whether it needs to print percentage value.
But it missed a case that first node is NULL. So sometimes it segfaults
like below:
$ perf top -g
perf: Segmentation fault
-------- backtrace --------
perf[0x4fcefb]
/usr/lib/libc.so.6(+0x33b20)[0x7f2a35839b20]
perf(rb_next+0x8)[0x47d3d8]
perf[0x4f6058]
perf[0x4f833b]
perf[0x4f8610]
perf[0x4f209e]
perf(ui_browser__run+0x3a)[0x4f2e6a]
perf[0x4f94ee]
perf(perf_evlist__tui_browse_hists+0x94)[0x4fbbf4]
perf[0x444d10]
/usr/lib/libpthread.so.0(+0x7314)[0x7f2a37070314]
/usr/lib/libc.so.6(clone+0x6d)[0x7f2a358ee5bd]
$ addr2line -e `which perf` 0x4f6058
/home/namhyung/project/linux/tools/perf/ui/browsers/hists.c:553
I don't know why the backtrace didn't print some symbols..
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Fixes: 4087d11cd9 ("perf hists browser: Print overhead percent value for first-level callchain")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1419401076-21700-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Markus reported that "perf top -g" can leak ~300MB per second on his
machine. This is partly because it missed to free callchains when hist
entries are deleted. Fix it.
Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20141230053813.GD6081@sejong
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When perf report --children resorts output fields, it tries to put
caller above the callee. But this was only meaningful for a same thread
and doing this requires callchain enabled. So fix its check before
comparing the callchain depth.
This also changes the hist accumulation tests: In test 3, xmalloc in
bash thread should be above than other perf threads due to alphabetical
order of comm string. Also it's under page_fault in bash thread since
alphabetical order of dso name. The sys_perf_event_open in perf thread
is put on the last line since it's self overhead is 0.
In test 4, the sys_perf_event_open is put above other perf entries that
have same children overhead since its callchain depth is smaller.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1419309381-2593-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>