Core changes:
- Make a lot of pin controllers with GPIO and irqchips immutable,
i.e. not living structs, but const structs. This is driving a
changed initiated by the irqchip maintainers.
New drivers:
- New driver for the NXP S32 SoC pin controller
- As part of a thorough cleanup and restructuring of the
Ralink/Mediatek drivers, the Ralink MIPS pin control drivers
were folded into the Mediatek directory and the family is
renamed "mtmips". The Ralink chips live on as Mediatek MIPS
family where new variants can be added. As part of this work
also the device tree bindings were reworked.
- New subdriver for the Qualcomm SM7150 SoC.
- New subdriver for the Qualcomm IPQ9574 SoC.
- New driver for the nVidia BlueField-3 SoC.
- Support for the Qualcomm PMM8654AU mixed signal circuit GPIO.
- Support for the Qualcomm PMI632 mixed signal circuit GPIO.
Improvements:
- Add some missing pins and generic cleanups on the Renesas
r8a779g0 and r8a779g0 pin controllers. Generic Renesas
extension for power source selection on several SoCs.
- Misc cleanups for the Atmel AT91 and AT91-PIO4 pin
controllers
- Make the GPIO mode work on the Qualcomm SM8550-lpass-lpi
driver.
- Several device tree binding cleanups as the binding
YAML syntax is solidifying.
-----BEGIN PGP SIGNATURE-----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=mMr0
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"Mostly drivers! Nothing special: some new Qualcomm chips as usual, and
the new NXP S32 and nVidia BlueField-3.
Core changes:
- Make a lot of pin controllers with GPIO and irqchips immutable,
i.e. not living structs, but const structs. This is driving a
changed initiated by the irqchip maintainers.
New drivers:
- New driver for the NXP S32 SoC pin controller
- As part of a thorough cleanup and restructuring of the
Ralink/Mediatek drivers, the Ralink MIPS pin control drivers were
folded into the Mediatek directory and the family is renamed
"mtmips". The Ralink chips live on as Mediatek MIPS family where
new variants can be added. As part of this work also the device
tree bindings were reworked.
- New subdriver for the Qualcomm SM7150 SoC.
- New subdriver for the Qualcomm IPQ9574 SoC.
- New driver for the nVidia BlueField-3 SoC.
- Support for the Qualcomm PMM8654AU mixed signal circuit GPIO.
- Support for the Qualcomm PMI632 mixed signal circuit GPIO.
Improvements:
- Add some missing pins and generic cleanups on the Renesas r8a779g0
and r8a779g0 pin controllers. Generic Renesas extension for power
source selection on several SoCs.
- Misc cleanups for the Atmel AT91 and AT91-PIO4 pin controllers
- Make the GPIO mode work on the Qualcomm SM8550-lpass-lpi driver.
- Several device tree binding cleanups as the binding YAML syntax is
solidifying"
* tag 'pinctrl-v6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (153 commits)
pinctrl-bcm2835.c: fix race condition when setting gpio dir
dt-bindings: pinctrl: qcom,sm8150: Drop duplicate function value "atest_usb2"
dt-bindings: pinctrl: qcom: Add few missing functions
pinctrl: qcom: spmi-gpio: Add PMI632 support
dt-bindings: pinctrl: qcom,pmic-gpio: add PMI632
pinctrl: wpcm450: select MFD_SYSCON
pinctrl: qcom ssbi-gpio: Convert to immutable irq_chip
pinctrl: qcom ssbi-mpp: Convert to immutable irq_chip
pinctrl: qcom spmi-mpp: Convert to immutable irq_chip
pinctrl: plgpio: Convert to immutable irq_chip
pinctrl: pistachio: Convert to immutable irq_chip
pinctrl: pic32: Convert to immutable irq_chip
pinctrl: sx150x: Convert to immutable irq_chip
pinctrl: stmfx: Convert to immutable irq_chip
pinctrl: st: Convert to immutable irq_chip
pinctrl: mcp23s08: Convert to immutable irq_chip
pinctrl: equilibrium: Convert to immutable irq_chip
pinctrl: npcm7xx: Convert to immutable irq_chip
pinctrl: armada-37xx: Convert to immutable irq_chip
pinctrl: nsp: Convert to immutable irq_chip
...
In the past setting the pin direction called pinctrl_gpio_direction()
which uses a mutex to serialize this. That was changed to set the
direction directly in the pin controller driver, but that lost the
serialization mechanism. Since the direction of multiple pins are in
the same register you can have a race condition, something that was
in fact observed with the cec-gpio driver.
Add a new spinlock to serialize writing to the FSEL registers.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: 1a4541b68e ("pinctrl-bcm2835: don't call pinctrl_gpio_direction()")
Link: https://lore.kernel.org/r/4302b66b-ca20-0f19-d2aa-ee8661118863@xs4all.nl
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Since commit 8b41fc4454 ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.
So remove it in the files in this commit, none of which can be built as
modules.
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: linux-modules@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com>
Cc: Ray Jui <rjui@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-gpio@vger.kernel.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Yeah, while the ->add_pin_ranges() shouldn't be used by DT drivers,
this one requires it to support quite old firmware descriptions that
do not have gpio-ranges property.
The change allows to clean up GPIO library from OF specifics.
There is no functional change intended.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20230113215352.44272-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Do not imply that some of the generic headers may be always included.
Instead, include explicitly what we are direct user of.
While at it, sort headers alphabetically.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
New drivers:
- Cypress CY8C95x0 chip pin control support, along with an immediate
cleanup.
- Mediatek MT8188 SoC pin control support.
- Qualcomm SM8450 and SC8280XP LPASS (low power audio subsystem)
pin control support.
- Qualcomm PM7250, PM8450
- Rockchip RV1126 SoC pin control support.
Improvements:
- Fix some missing pins in the Armada 37xx driver.
- Convert Broadcom and Nomadik drivers to use PINCTRL_PINGROUP() macro.
- Fix some GPIO irq_chips to be immutable.
- Massive Qualcomm device tree binding cleanup, with more to come.
-----BEGIN PGP SIGNATURE-----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=PvLX
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"There is nothing exciting going on, no core changes, just a few
drivers and cleanups.
New drivers:
- Cypress CY8C95x0 chip pin control support, along with an immediate
cleanup
- Mediatek MT8188 SoC pin control support
- Qualcomm SM8450 and SC8280XP LPASS (low power audio subsystem) pin
control support
- Qualcomm PM7250, PM8450
- Rockchip RV1126 SoC pin control support
Improvements:
- Fix some missing pins in the Armada 37xx driver
- Convert Broadcom and Nomadik drivers to use PINCTRL_PINGROUP()
macro
- Fix some GPIO irq_chips to be immutable
- Massive Qualcomm device tree binding cleanup, with more to come"
* tag 'pinctrl-v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (119 commits)
MAINTAINERS: adjust STARFIVE JH7100 PINCTRL DRIVER after file movement
pinctrl: starfive: Rename "pinctrl-starfive" to "pinctrl-starfive-jh7100"
pinctrl: Create subdirectory for StarFive drivers
dt-bindings: pinctrl: st,stm32: Document interrupt-controller property
dt-bindings: pinctrl: st,stm32: Document gpio-hog pattern property
dt-bindings: pinctrl: st,stm32: Document gpio-line-names
pinctrl: st: stop abusing of_get_named_gpio()
pinctrl: wpcm450: Correct the fwnode_irq_get() return value check
pinctrl: bcm: Remove unused struct bcm6328_pingroup
pinctrl: qcom: restrict drivers per ARM/ARM64
pinctrl: bcm: ns: Remove redundant dev_err call
gpio: rockchip: request GPIO mux to pinctrl when setting direction
pinctrl: rockchip: add pinmux_ops.gpio_set_direction callback
pinctrl: cy8c95x0: Align function names in cy8c95x0_pmxops
pinctrl: cy8c95x0: Drop atomicity on operations on push_pull
pinctrl: cy8c95x0: Lock register accesses in cy8c95x0_set_mux()
pinctrl: sunxi: sun50i-h5: Switch to use dev_err_probe() helper
pinctrl: stm32: Switch to use dev_err_probe() helper
dt-bindings: qcom-pmic-gpio: Add PM7250B and PM8450 bindings
pinctrl: qcom: spmi-gpio: Add compatible for PM7250B
...
After commit 0e3db16300fb("pinctrl: bcm: Convert drivers to use struct pingroup
and PINCTRL_PINGROUP()"), no one use struct bcm6328_pingroup, so remove it.
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220927133926.103943-1-yuancan@huawei.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The pin control header provides struct pingroup and PINCTRL_PINGROUP() macro.
Utilize them instead of open coded variants in the driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220620165053.74170-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
With Broadcom Broadband arch ARCH_BCMBCA supported in the kernel, this
patch series migrate the ARCH_BCM4908 symbol to ARCH_BCMBCA. Hence
replace ARCH_BCM4908 with ARCH_BCMBCA in subsystem Kconfig files.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Acked-by: Guenter Roeck <linux@roeck-us.net> (for watchdog)
Acked-by: Bjorn Helgaas <bhelgaas@google.com> (for drivers/pci)
Acked-by: Wolfram Sang <wsa@kernel.org> (for i2c)
Acked-by: Philipp Zabel <p.zabel@pengutronix.de> (for reset)
Link: https://lore.kernel.org/r/20220803175455.47638-7-william.zhang@broadcom.com
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Core changes:
- Add PINCTRL_PINGROUP() helper macro (and use it in the AMD driver).
New drivers:
- Intel Meteor Lake support.
- Reneasas RZ/V2M and r8a779g0 (R-Car V4H).
- AXP209 variants AXP221, AXP223 and AXP809.
- Qualcomm MSM8909, PM8226, PMP8074 and SM6375.
- Allwinner D1.
Improvements:
- Proper pin multiplexing in the AMD driver.
- Mediatek MT8192 can use generic drive strength and pin
bias, then fixes on top plus some I2C pin group fixes.
- Have the Allwinner Sunplus SP7021 use the generic DT schema and
make interrupts optional.
- Handle Qualcomm SC7280 ADSP.
- Handle Qualcomm MSM8916 CAMSS GP clock muxing.
- High impedance bias on ZynqMP.
- Serialize StarFive access to MMIO.
- Immutable gpiochip for BCM2835, Ingenic, Qualcomm SPMI GPIO.
-----BEGIN PGP SIGNATURE-----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=enmk
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"Outside the pinctrl driver and DT bindings we hit some Arm DT files,
patched by the maintainers.
Other than that it is business as usual.
Core changes:
- Add PINCTRL_PINGROUP() helper macro (and use it in the AMD driver).
New drivers:
- Intel Meteor Lake support.
- Reneasas RZ/V2M and r8a779g0 (R-Car V4H).
- AXP209 variants AXP221, AXP223 and AXP809.
- Qualcomm MSM8909, PM8226, PMP8074 and SM6375.
- Allwinner D1.
Improvements:
- Proper pin multiplexing in the AMD driver.
- Mediatek MT8192 can use generic drive strength and pin bias, then
fixes on top plus some I2C pin group fixes.
- Have the Allwinner Sunplus SP7021 use the generic DT schema and
make interrupts optional.
- Handle Qualcomm SC7280 ADSP.
- Handle Qualcomm MSM8916 CAMSS GP clock muxing.
- High impedance bias on ZynqMP.
- Serialize StarFive access to MMIO.
- Immutable gpiochip for BCM2835, Ingenic, Qualcomm SPMI GPIO"
* tag 'pinctrl-v6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (117 commits)
dt-bindings: pinctrl: qcom,pmic-gpio: add PM8226 constraints
pinctrl: qcom: Make PINCTRL_SM8450 depend on PINCTRL_MSM
pinctrl: qcom: sm8250: Fix PDC map
pinctrl: amd: Fix an unused variable
dt-bindings: pinctrl: mt8186: Add and use drive-strength-microamp
dt-bindings: pinctrl: mt8186: Add gpio-line-names property
ARM: dts: imxrt1170-pinfunc: Add pinctrl binding header
pinctrl: amd: Use unicode for debugfs output
pinctrl: amd: Fix newline declaration in debugfs output
pinctrl: at91: Fix typo 'the the' in comment
dt-bindings: pinctrl: st,stm32: Correct 'resets' property name
pinctrl: mvebu: Missing a blank line after declarations.
pinctrl: qcom: Add SM6375 TLMM driver
dt-bindings: pinctrl: Add DT schema for SM6375 TLMM
dt-bindings: pinctrl: mt8195: Use drive-strength-microamp in examples
Revert "pinctrl: qcom: spmi-gpio: make the irqchip immutable"
pinctrl: imx93: Add MODULE_DEVICE_TABLE()
pinctrl: sunxi: Add driver for Allwinner D1
pinctrl: sunxi: Make some layout parameters dynamic
pinctrl: sunxi: Refactor register/offset calculation
...
Commit 6c846d026d ("gpio: Don't fiddle with irqchips marked as
immutable") added a warning to indicate if the gpiolib is altering the
internals of irqchips. The bcm2835 pinctrl is also affected by this
warning.
Fix this by making the irqchip in the bcm2835 pinctrl driver immutable.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220614202831.236341-3-stefan.wahren@i2se.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The commit b8a19382ac ("pinctrl: bcm2835: Fix support for threaded level
triggered IRQs") assigned the irq_mask/unmask callbacks with the
already existing functions for irq_enable/disable. The wasn't completely
the right way (tm) to fix the issue, because these callbacks shouldn't
be identical. So fix this by rename the functions to represent their
intension and drop the unnecessary irq_enable/disable assigment.
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220614202831.236341-2-stefan.wahren@i2se.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Based on the normalized pattern:
this program is free software you can redistribute it and/or modify it
under the terms of the gnu general public license as published by the
free software foundation version 2 this program is distributed as is
without any warranty of any kind whether express or implied without
even the implied warranty of merchantability or fitness for a
particular purpose see the gnu general public license for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference.
Reviewed-by: Allison Randal <allison@lohutok.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The commit c8013355ea ("ARM: dts: gpio-ranges property is now required")
fixed the GPIO probing issues caused by "pinctrl: bcm2835: Change init
order for gpio hogs". This changed only the kernel DTS files. Unfortunately
it isn't guaranteed that these files are shipped to all users.
So implement the necessary backward compatibility for BCM2835 and
BCM2711 platform.
Fixes: 266423e60e ("pinctrl: bcm2835: Change init order for gpio hogs")
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220409095129.45786-3-stefan.wahren@i2se.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
No core changes this time. Just new driver code and improvements!
New drivers:
- New driver for the Broadcom BCM4908 SoC.
- New subdriver for Tesla FSD (Full Self Driving) SoC, a
derivative of the Samsung Exynos pin control driver.
- New driver for the Amlogic Meson S4 SoC.
- New driver for the Sunplus SP7021 SoC.
- New driver for the Microsemi Ocelot family ServalT SoC.
- New subdriver for Intel Alder Lake-M SoC.
- New subdriver for Intel Ice Lake-N SoC, including PCH support.
- New subdriver for Renesas R8A779F0 SoC.
- New subdriver for Mediatek MT8186 SoC.
- New subdriver for NXP Freescale i.MX93 SoC.
- New driver for Nuvoton WPCM450 SoC.
- New driver for Qualcomm SC8280XP SoC.
Improvements:
- Wakeup support on Samsung Exynos850 and ExynosAutov9.
- Serious and voluminous maintenance cleanup and refactoring in
the Renesas drivers. Mainly sharing similar data between the
different SoC subdrivers.
- Qualcomm SM8450 EGPIO support.
- Drive strength support on the Mediatek MT8195.
- Add some missing groups and functions to the Ralink RT2880.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEElDRnuGcz/wPCXQWMQRCzN7AZXXMFAmJBsSwACgkQQRCzN7AZ
XXOoVhAAhHW2FSXB8ud1mdyuN3CswMSiWrZqC8nveznHMcddzsDvZsGsAP8x6fKi
1CgTXDQblA/plpxqORvBDA8Ji9+z9NAilIMds1ZcMbPjpY1l63uD5VhWq7tpPN1H
ALnJAhc4rl1fkJ01U5sTtHJ8xibjpN690ZCrfzNwdLOQAUvXJ22zuyuIcSBFiSMv
ij4E2fejOj0ZN7rzb8xTxcaSWUrj5Kci5Eaq6yi/clKHaOrrV5r/tX9yo7uWF3mi
6UX/1IioougtMF2bhsoodQE5E5XN8Hjm2+VWULxBCsKjI1gKY/NR2GXeaHHJve8B
do3Y45cU+zZSWVo4mmlf/Z3+4npIQlMFe8LvDmBvb3ZopcbapuGiOSzYxT6aZA/z
WtGDDIaECcNF/dJCHwRugAsG5OhT0AYyNblMxsmW+ARoTocMlYPG8Jq4KEmIoIEz
m+UArJEe8asQlk4ebK/e0x2hbywgfN02ILO8OygpXpwsHAyx7pjDk7SABkzrAQLg
vTpI1i7q1hsYyeTm9RXJJd2VTe9fpYLTgjTa5bnqBQNcsyEd5o9QtH/IwARS/NP7
nNlZLUIUsOa782O6N4oT5JGb96a3cMxHv+hAIKcwhxK/54IYrGh+/BAORnfoe0Vo
h6pwKoUVE+L70t0RfmVqYK0EX6zsWSnb1NNNJFM+uLLpfFnx+1U=
=TY4V
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"No core changes this time. Just new driver code and improvements!
New drivers:
- New driver for the Broadcom BCM4908 SoC.
- New subdriver for Tesla FSD (Full Self Driving) SoC, a derivative
of the Samsung Exynos pin control driver.
- New driver for the Amlogic Meson S4 SoC.
- New driver for the Sunplus SP7021 SoC.
- New driver for the Microsemi Ocelot family ServalT SoC.
- New subdriver for Intel Alder Lake-M SoC.
- New subdriver for Intel Ice Lake-N SoC, including PCH support.
- New subdriver for Renesas R8A779F0 SoC.
- New subdriver for Mediatek MT8186 SoC.
- New subdriver for NXP Freescale i.MX93 SoC.
- New driver for Nuvoton WPCM450 SoC.
- New driver for Qualcomm SC8280XP SoC.
Improvements:
- Wakeup support on Samsung Exynos850 and ExynosAutov9.
- Serious and voluminous maintenance cleanup and refactoring in the
Renesas drivers. Mainly sharing similar data between the different
SoC subdrivers.
- Qualcomm SM8450 EGPIO support.
- Drive strength support on the Mediatek MT8195.
- Add some missing groups and functions to the Ralink RT2880"
* tag 'pinctrl-v5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (188 commits)
pinctrl: mediatek: common-v1: fix semicolon.cocci warnings
pinctrl: nuvoton: wpcm450: Fix build error without OF
pinctrl: qcom-pmic-gpio: Add support for pm8450
dt-bindings: pinctrl: aspeed: Update gfx node in example
dt-bindings: pinctrl: rt2880: add missing pin groups and functions
pinctrl: ingenic: Fix regmap on X series SoCs
pinctrl: nuvoton: Fix return value check in wpcm450_gpio_register()
pinctrl: nuvoton: wpcm450: off by one in wpcm450_gpio_register()
pinctrl: nuvoton: wpcm450: select GENERIC_PINCTRL_GROUPS
pinctrl: nuvoton: Fix sparse warning
pinctrl: mediatek: mt8186: Account for probe refactoring
pinctrl: mediatek: common-v1: Commonize spec_ies_smt_set callback
pinctrl: mediatek: common-v1: Commonize spec_pupd callback
pinctrl: mediatek: common-v1: Use common probe function
pinctrl: mediatek: common-v1: Add common probe function
pinctrl: mediatek: paris: Unify probe function by using OF match data
pinctrl/rockchip: Add missing of_node_put() in rockchip_pinctrl_probe
pinctrl: nomadik: Add missing of_node_put() in nmk_pinctrl_probe
pinctrl: berlin: fix error return code of berlin_pinctrl_build_state()
pinctrl: qcom: Introduce sc8280xp TLMM driver
...
When PINCTRL_BCM63XX is selected,
and REGMAP is not selected,
Kbuild gives the following warning:
WARNING: unmet direct dependencies detected for GPIO_REGMAP
Depends on [n]: GPIOLIB [=y] && REGMAP [=n]
Selected by [y]:
- PINCTRL_BCM63XX [=y] && PINCTRL [=y]
This is because PINCTRL_BCM63XX
selects GPIO_REGMAP without selecting or depending on
REGMAP, despite GPIO_REGMAP depending on REGMAP.
This unmet dependency bug was detected by Kismet,
a static analysis tool for Kconfig. Please advise
if this is not the appropriate solution.
Signed-off-by: Julian Braha <julianbraha@gmail.com>
Link: https://lore.kernel.org/r/20220117062557.89568-1-julianbraha@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
After commit 266423e60e ("pinctrl: bcm2835: Change init order for gpio
hogs") a few error paths would not unwind properly the registration of
gpio ranges. Correct that by assigning a single error label and goto it
whenever we encounter a fatal error.
Fixes: 266423e60e ("pinctrl: bcm2835: Change init order for gpio hogs")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220127215033.267227-1-f.fainelli@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
BCM4908 has its own pins layout so it needs a custom binding and a Linux
driver.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220124102243.14912-2-zajec5@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Core changes:
- New standard enumerator and corresponding device tree bindings
for output impedance pin configuration. (Implemented and used
in the Renesas rzg2l driver.)
- Cleanup of Kconfig and Makefile to be somewhat orderly and
alphabetic.
New drivers:
- Samsung Exynos 7885 pin controller.
- Ocelot LAN966x pin controller.
- Qualcomm SDX65 pin controller.
- Qualcomm SM8450 pin controller.
- Qualcomm PM8019, PM8226 and PM2250 pin controllers.
- NXP/Freescale i.MXRT1050 pin controller.
- Intel Thunder Bay pin controller.
Enhancements:
- Introduction of the string library helper function
"kasprintf_strarray()" and subsequent use in Rockchip, ST and
Armada pin control drivers, as well as the GPIO mockup driver.
- The Ocelot pin controller has been extensively rewritten to
use regmap and other modern kernel infrastructure.
- The Microchip SGPIO driver has been converted to use regmap.
- The SPEAr driver had been converted to use regmap.
- Substantial cleanups and janitorial on the Apple pin control
driver that was merged for v5.16.
- Janitorial to remove of_node assignments in the GPIO portions
that anyway get this handled in the GPIO core.
- Minor cleanups and improvements in several pin controllers.
-----BEGIN PGP SIGNATURE-----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=+nxh
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control bulk updates from Linus Walleij:
"Core changes:
- New standard enumerator and corresponding device tree bindings for
output impedance pin configuration. (Implemented and used in the
Renesas rzg2l driver.)
- Cleanup of Kconfig and Makefile to be somewhat orderly and
alphabetic.
New drivers:
- Samsung Exynos 7885 pin controller.
- Ocelot LAN966x pin controller.
- Qualcomm SDX65 pin controller.
- Qualcomm SM8450 pin controller.
- Qualcomm PM8019, PM8226 and PM2250 pin controllers.
- NXP/Freescale i.MXRT1050 pin controller.
- Intel Thunder Bay pin controller.
Enhancements:
- Introduction of the string library helper function
"kasprintf_strarray()" and subsequent use in Rockchip, ST and
Armada pin control drivers, as well as the GPIO mockup driver.
- The Ocelot pin controller has been extensively rewritten to use
regmap and other modern kernel infrastructure.
- The Microchip SGPIO driver has been converted to use regmap.
- The SPEAr driver had been converted to use regmap.
- Substantial cleanups and janitorial on the Apple pin control driver
that was merged for v5.16.
- Janitorial to remove of_node assignments in the GPIO portions that
anyway get this handled in the GPIO core.
- Minor cleanups and improvements in several pin controllers"
* tag 'pinctrl-v5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (98 commits)
pinctrl: imx: fix assigning groups names
dt-bindings: pinctrl: mt8195: add wrapping node of pin configurations
pinctrl: bcm: ns: use generic groups & functions helpers
pinctrl: imx: fix allocation result check
pinctrl: samsung: Use platform_get_irq_optional() to get the interrupt
pinctrl: Propagate firmware node from a parent device
dt-bindings: pinctrl: qcom: Add SDX65 pinctrl bindings
pinctrl: add one more "const" for generic function groups
pinctrl: keembay: rework loops looking for groups names
pinctrl: keembay: comment process of building functions a bit
pinctrl: imx: prepare for making "group_names" in "function_desc" const
ARM: dts: gpio-ranges property is now required
pinctrl: aspeed: fix unmet dependencies on MFD_SYSCON for PINCTRL_ASPEED
pinctrl: Get rid of duplicate of_node assignment in the drivers
pinctrl-sunxi: don't call pinctrl_gpio_direction()
pinctrl-bcm2835: don't call pinctrl_gpio_direction()
pinctrl: bcm2835: Silence uninit warning
pinctrl: Sort Kconfig and Makefile entries alphabetically
pinctrl: Add Intel Thunder Bay pinctrl driver
dt-bindings: pinctrl: Add bindings for Intel Thunderbay pinctrl driver
...
This simplifies ns driver and gets rid of ~70 lines of code.
"const" had to be dropped from "struct ns_pinctrl_group" @pins to match
"struct group_desc" @pins and pinctrl_generic_add_group(). Otherwise it
would cause:
drivers/pinctrl/bcm/pinctrl-ns.c: In function 'ns_pinctrl_probe':
drivers/pinctrl/bcm/pinctrl-ns.c:277:13: warning: passing argument 3 of 'pinctrl_generic_add_group' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers]
277 | group->pins, group->num_pins, NULL);
| ~~~~~^~~~~~
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20211222064344.14624-1-zajec5@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
GPIO library does copy the of_node from the parent device of
the GPIO chip, there is no need to repeat this in the individual
drivers. Remove these assignment all at once.
For the details one may look into the of_gpio_dev_init() implementation.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20211214125855.33207-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Set the direction directly without calling pinctrl_gpio_direction().
This avoids the mutex_lock() calls in that function, which would
invalid the can_sleep = false.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20211206131648.1521868-3-hverkuil-cisco@xs4all.nl
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
...and gpio-ranges
pinctrl-bcm2835 is a combined pinctrl/gpio driver. Currently the gpio
side is registered first, but this breaks gpio hogs (which are
configured during gpiochip_add_data). Part of the hog initialisation
is a call to pinctrl_gpio_request, and since the pinctrl driver hasn't
yet been registered this results in an -EPROBE_DEFER from which it can
never recover.
Change the initialisation sequence to register the pinctrl driver
first.
This also solves a similar problem with the gpio-ranges property, which
is required in order for released pins to be returned to inputs.
Fixes: 73345a18d4 ("pinctrl: bcm2835: Pass irqchip when adding gpiochip")
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20211206092237.4105895-2-phil@raspberrypi.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The uninitialized variable would be caught by the BUG_ON()
logic below, but the kernel test robot cannot see that.
Silence the warning by initializing the variable.
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20211209134513.306212-1-linus.walleij@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Core changes:
- Add infrastructure for per-parent interrupt data to support
the Apple pin controller.
New drivers:
- New combined pin control and GPIO driver for the Apple SoC.
This is used in all modern Apple silicon such as the M1
laptops but also in at least recent iPhone variants.
- New subdriver for the Qualcomm SM6350
- New subdriver for the Qualcomm QCM2290
- New subdriver for the Qualcomm PM6350
- New subdriver for the Uniphier NX1
- New subdriver for the Samsung ExynosAutoV9
- New subdriver for the Mediatek MT7986
- New subdriver for the nVidia Tegra194
Improvements:
- Improve power management in the Mediatek driver.
- Improvements to the Renesas internal consistency checker.
- Convert the Rockchip pin control device tree bindings to YAML.
- Finally convert the Qualcomm PMIC SSBI and SPMI MPP GPIO
driver to use hierarchical interrupts.
- Convert the Qualcomm PMIC MPP device tree bindings to YAML.
-----BEGIN PGP SIGNATURE-----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=4Ms6
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"The most interesting aspect is that we now have initial support for
the Apple pin controller as used in the M1 laptops and the iPhones
which is a step forward for using Linux efficiently on this Apple
silicon.
Core changes:
- Add infrastructure for per-parent interrupt data to support the
Apple pin controller.
New drivers:
- New combined pin control and GPIO driver for the Apple SoC. This is
used in all modern Apple silicon such as the M1 laptops but also in
at least recent iPhone variants.
- New subdriver for the Qualcomm SM6350
- New subdriver for the Qualcomm QCM2290
- New subdriver for the Qualcomm PM6350
- New subdriver for the Uniphier NX1
- New subdriver for the Samsung ExynosAutoV9
- New subdriver for the Mediatek MT7986
- New subdriver for the nVidia Tegra194
Improvements:
- Improve power management in the Mediatek driver.
- Improvements to the Renesas internal consistency checker.
- Convert the Rockchip pin control device tree bindings to YAML.
- Finally convert the Qualcomm PMIC SSBI and SPMI MPP GPIO driver to
use hierarchical interrupts.
- Convert the Qualcomm PMIC MPP device tree bindings to YAML"
* tag 'pinctrl-v5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (55 commits)
pinctrl: add pinctrl/GPIO driver for Apple SoCs
dt-bindings: pinctrl: Add apple,npins property to apple,pinctrl
dt-bindings: pinctrl: add #interrupt-cells to apple,pinctrl
gpio: Allow per-parent interrupt data
pinctrl: tegra: Fix warnings and error
pinctrl: intel: Kconfig: Add configuration menu to Intel pin control
pinctrl: tegra: Use correct offset for pin group
pinctrl: core: fix possible memory leak in pinctrl_enable()
pinctrl: bcm2835: Allow building driver as a module
pinctrl: equilibrium: Fix function addition in multiple groups
pinctrl: tegra: Add pinmux support for Tegra194
pinctrl: tegra: include lpdr pin properties
pinctrl: mediatek: add support for MT7986 SoC
dt-bindings: pinctrl: update bindings for MT7986 SoC
pinctrl: microchip sgpio: use reset driver
dt-bindings: pinctrl: pinctrl-microchip-sgpio: Add reset binding
dt-bindings: pinctrl: qcom,pmic-mpp: switch to #interrupt-cells
pinctrl: qcom: spmi-mpp: add support for hierarchical IRQ chip
pinctrl: qcom: spmi-mpp: hardcode IRQ counts
pinctrl: qcom: ssbi-mpp: add support for hierarchical IRQ chip
...
Update the pinctrl-bcm2835 driver to support being built as as a module
by converting it to a module_platform_driver() with the appropriate
module license, authors and description.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Link: https://lore.kernel.org/r/20211019221127.1953001-1-f.fainelli@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This reverts commit a49d784d5a.
The updated binding was wrong / invalid and has been reverted. There
isn't any upstream kernel DTS using it and Broadcom isn't known to use
it neither. There is close to zero chance this will cause regression for
anyone.
Actually in-kernel bcm5301x.dtsi still uses the old good binding and so
it's broken since the driver update. This revert fixes it.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20211008205938.29925-3-zajec5@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
no core changes at all this time, just driver work!
New drivers:
- New subdriver for Intel Keem Bay (an ARM-based SoC)
- New subdriver for Qualcomm MDM9607 and SM6115
- New subdriver for ST Microelectronics STM32MP135
- New subdriver for Freescale i.MX8ULP ("Ultra Low Power")
- New subdriver for Ingenic X2100
- Support for Qualcomm PMC8180, PMC8180C, SA8155p-adp PMIC GPIO
- Support Samsung Exynos850
- Support Renesas RZ/G2L
Enhancements:
- A major refactoring of the Rockchip driver, breaking part of it out
to a separate GPIO driver in drivers/gpio
- Pin bias support on Renesas r8a77995
- Add SCI pins support to Ingenic JZ4755 and JZ4760
- Mediatek device tree bindings converted to YAML
-----BEGIN PGP SIGNATURE-----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=I6N/
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"This is the bulk of pin control changes for the v5.15 kernel cycle, no
core changes at all this time, just driver work!
New drivers:
- New subdriver for Intel Keem Bay (an ARM-based SoC)
- New subdriver for Qualcomm MDM9607 and SM6115
- New subdriver for ST Microelectronics STM32MP135
- New subdriver for Freescale i.MX8ULP ("Ultra Low Power")
- New subdriver for Ingenic X2100
- Support for Qualcomm PMC8180, PMC8180C, SA8155p-adp PMIC GPIO
- Support Samsung Exynos850
- Support Renesas RZ/G2L
Enhancements:
- A major refactoring of the Rockchip driver, breaking part of it out
to a separate GPIO driver in drivers/gpio
- Pin bias support on Renesas r8a77995
- Add SCI pins support to Ingenic JZ4755 and JZ4760
- Mediatek device tree bindings converted to YAML"
* tag 'pinctrl-v5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (53 commits)
pinctrl: renesas: Add RZ/G2L pin and gpio controller driver
pinctrl: samsung: Add Exynos850 SoC specific data
dt-bindings: pinctrl: samsung: Add Exynos850 doc
MAINTAINERS: Add maintainers for amd-pinctrl driver
pinctrl: Add Intel Keem Bay pinctrl driver
dt-bindings: pinctrl: Add bindings for Intel Keembay pinctrl driver
pinctrl: zynqmp: Drop pinctrl_unregister for devm_ registered device
dt-bindings: pinctrl: qcom-pmic-gpio: Remove the interrupts property
dt-bindings: pinctrl: qcom-pmic-gpio: Convert qcom pmic gpio bindings to YAML
dt-bindings: pinctrl: mt8195: Use real world values for drive-strength arguments
dt-bindings: mediatek: convert pinctrl to yaml
arm: dts: mt8183: Move pinfunc to include/dt-bindings/pinctrl
arm: dts: mt8135: Move pinfunc to include/dt-bindings/pinctrl
pinctrl: ingenic: Add .max_register in regmap_config
pinctrl: ingenic: Fix bias config for X2000(E)
pinctrl: ingenic: Fix incorrect pull up/down info
pinctrl: Ingenic: Add pinctrl driver for X2100.
dt-bindings: pinctrl: Add bindings for Ingenic X2100.
pinctrl: Ingenic: Add SSI pins support for JZ4755 and JZ4760.
pinctrl: Ingenic: Improve the code.
...
Wherever possible, replace constructs that match either
generic_handle_irq(irq_find_mapping()) or
generic_handle_irq(irq_linear_revmap()) to a single call to
generic_handle_domain_irq().
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
The if condition followed by BUG can be replaced to BUG_ON which is
more compact and formal in linux source.
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20210624064913.41788-1-wangborong@cdjrlc.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
These are only assigned, either directly or via the bcm63xx_pinctrl_soc
struct, to the pmxops field in the pinctrl_desc struct and never
modified, so make them const to allow the compiler to put them in
read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20210605185908.39982-3-rikard.falkeborn@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
These are only assigned, either directly or via the bcm63xx_pinctrl_soc
struct, to the pctlops field in the pinctrl_desc struct and never
modified, so make them const to allow the compiler to put them in
read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20210605185908.39982-2-rikard.falkeborn@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The downstream .dts files only request two GPIO IRQs. Truncate the
array of parent IRQs when irq_of_parse_and_map returns 0.
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Signed-off-by: Ivan T. Ivanov <iivanov@suse.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20210521090158.26932-1-iivanov@suse.de
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
When devm_ioremap_resource() fails, a clear enough error message will be
printed by its subfunction __devm_ioremap_resource(). The error
information contains the device name, failure cause, and possibly resource
information.
Therefore, remove the error printing here to simplify code and reduce the
binary size.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Acked-by: Ray Jui <ray.jui@broadcom.com>
Link: https://lore.kernel.org/r/20210511085126.4287-1-thunder.leizhen@huawei.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The additional patch below fixes all of the kconfig warnings and
build errors for me.
Link: https://lore.kernel.org/r/9e1cec76-1c0a-9203-7995-4c2d09b711d8@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
[Tweaked some other line in the BCMxxx]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add depends on OF so we don't get weird build errors on
randconfig.
Also order selects the same as the other drivers for
pure aestetic reasons.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The current implementation of bcm6362_set_gpio() produces the following
warning on x86_64:
drivers/pinctrl/bcm/pinctrl-bcm6362.c: In function 'bcm6362_set_gpio':
drivers/pinctrl/bcm/pinctrl-bcm6362.c:503:8: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
503 | (uint32_t) desc->drv_data, 0);
| ^
Modify the code to make it similar to bcm63268_set_gpio() in order to fix
the warning.
Fixes: 705791e23e ("pinctrl: add a pincontrol driver for BCM6362")
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Link: https://lore.kernel.org/r/20210330103225.3949-1-noltari@gmail.com
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add a pincontrol driver for BCM6318. BCM6318 allows muxing most GPIOs
to different functions. BCM6318 is similar to BCM6328 with the addition
of a pad register, and the GPIO meaning of the mux register changes
based on the GPIO number.
Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Link: https://lore.kernel.org/r/20210324081923.20379-23-noltari@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add a pincontrol driver for BCM63268. BCM63268 allows muxing GPIOs
to different functions. Depending on the mux, these are either single
pin configurations or whole pin groups.
Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Link: https://lore.kernel.org/r/20210324081923.20379-20-noltari@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add a pincontrol driver for BCM6368. BCM6368 allows muxing the first 32
GPIOs onto alternative functions. Not all are documented.
Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Link: https://lore.kernel.org/r/20210324081923.20379-17-noltari@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add a pincotrol driver for BCM6362. BCM6362 allows muxing individual
GPIO pins to the LED controller, to be available by the integrated
wifi, or other functions. It also supports overlay groups, of which
only NAND is documented.
Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Link: https://lore.kernel.org/r/20210324081923.20379-14-noltari@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add a pincotrol driver for BCM6358. BCM6358 allow overlaying different
functions onto the GPIO pins. It does not support configuring individual
pins but only whole groups. These groups may overlap, and still require
the directions to be set correctly in the GPIO register. In addition the
functions register controls other, not directly mux related functions.
Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Link: https://lore.kernel.org/r/20210324081923.20379-11-noltari@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add a pincontrol driver for BCM6328. BCM6328 supports muxing 32 pins as
GPIOs, as LEDs for the integrated LED controller, or various other
functions. Its pincontrol mux registers also control other aspects, like
switching the second USB port between host and device mode.
Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Link: https://lore.kernel.org/r/20210324081923.20379-8-noltari@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
