The flag is already set before compare rcw with rmw, so it is
not necessary to do it again.
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
We get compilation error on 32-bit architectures (e.g. m68k), as:
ERROR: modpost: "__udivdi3" [drivers/md/raid456.ko] undefined!
Since 'sync_blocks' is defined as u64, use do_div() to fix this error.
Fixes: c911c46c01 ("md/raid456: convert macro STRIPE_* to RAID5_STRIPE_*")
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Adding a new 'stripe_size' sysfs entry to set and show stripe_size.
stripe_size should not be bigger than PAGE_SIZE, and it requires to
be multiple of 4096. We can adjust stripe_size by writing value into
sysfs entry, likely, set stripe_size as 16KB:
echo 16384 > /sys/block/md1/md/stripe_size
Show current stripe_size value:
cat /sys/block/md1/md/stripe_size
For PAGE_SIZE is equal to 4096, 'stripe_size' can just be read.
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
In RAID5, if issued bio size is bigger than stripe_size, it will be
split in the unit of stripe_size and process them one by one. Even
for size less then stripe_size, RAID5 also request data from disk at
least of stripe_size.
Nowdays, stripe_size is equal to the value of PAGE_SIZE. Since filesystem
usually issue bio in the unit of 4KB, there is no problem for PAGE_SIZE
as 4KB. But, for 64KB PAGE_SIZE, bio from filesystem requests 4KB data
while RAID5 issue IO at least stripe_size (64KB) each time. That will
waste resource of disk bandwidth and compute xor.
To avoding the waste, we want to make stripe_size configurable. This
patch just set default stripe_size as 4096. User can also set the value
bigger than 4KB for some special requirements, such as we know the
issued io size is more than 4KB.
To evaluate the new feature, we create raid5 device '/dev/md5' with
4 SSD disk and test it on arm64 machine with 64KB PAGE_SIZE.
1) We format /dev/md5 with mkfs.ext4 and mount ext4 with default
configure on /mnt directory. Then, trying to test it by dbench with
command: dbench -D /mnt -t 1000 10. Result show as:
'stripe_size = 64KB'
Operation Count AvgLat MaxLat
----------------------------------------
NTCreateX 9805011 0.021 64.728
Close 7202525 0.001 0.120
Rename 415213 0.051 44.681
Unlink 1980066 0.079 93.147
Deltree 240 1.793 6.516
Mkdir 120 0.004 0.007
Qpathinfo 8887512 0.007 37.114
Qfileinfo 1557262 0.001 0.030
Qfsinfo 1629582 0.012 0.152
Sfileinfo 798756 0.040 57.641
Find 3436004 0.019 57.782
WriteX 4887239 0.021 57.638
ReadX 15370483 0.005 37.818
LockX 31934 0.003 0.022
UnlockX 31933 0.001 0.021
Flush 687205 13.302 530.088
Throughput 307.799 MB/sec 10 clients 10 procs max_latency=530.091 ms
-------------------------------------------------------
'stripe_size = 4KB'
Operation Count AvgLat MaxLat
----------------------------------------
NTCreateX 11999166 0.021 36.380
Close 8814128 0.001 0.122
Rename 508113 0.051 29.169
Unlink 2423242 0.070 38.141
Deltree 300 1.885 7.155
Mkdir 150 0.004 0.006
Qpathinfo 10875921 0.007 35.485
Qfileinfo 1905837 0.001 0.032
Qfsinfo 1994304 0.012 0.125
Sfileinfo 977450 0.029 26.489
Find 4204952 0.019 9.361
WriteX 5981890 0.019 27.804
ReadX 18809742 0.004 33.491
LockX 39074 0.003 0.025
UnlockX 39074 0.001 0.014
Flush 841022 10.712 458.848
Throughput 376.777 MB/sec 10 clients 10 procs max_latency=458.852 ms
-------------------------------------------------------
It show that setting stripe_size as 4KB has higher thoughput, i.e.
(376.777 vs 307.799) and has smaller latency than that setting as 64KB.
2) We try to evaluate IO throughput for /dev/md5 by fio with config:
[4KB randwrite]
direct=1
numjob=2
iodepth=64
ioengine=libaio
filename=/dev/md5
bs=4KB
rw=randwrite
[64KB write]
direct=1
numjob=2
iodepth=64
ioengine=libaio
filename=/dev/md5
bs=1MB
rw=write
The result as follow:
+ +
| stripe_size(64KB) | stripe_size(4KB)
+----------------------------------------------------+
4KB randwrite | 15MB/s | 100MB/s
+----------------------------------------------------+
1MB write | 1000MB/s | 700MB/s
The result show that when size of io is bigger than 4KB (64KB),
64KB stripe_size has much higher IOPS. But for 4KB randwrite, that
means, size of io issued to device are smaller, 4KB stripe_size
have better performance.
Normally, default value (4096) can get relatively good performance.
But if each issued io is bigger than 4096, setting value more than
4096 may get better performance.
Here, we just set default stripe_size as 4096, and we will try to
support setting different stripe_size by sysfs interface in the
following patch.
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Convert macro STRIPE_SIZE, STRIPE_SECTORS and STRIPE_SHIFT to
RAID5_STRIPE_SIZE(), RAID5_STRIPE_SECTORS() and RAID5_STRIPE_SHIFT().
This patch is prepare for the following adjustable stripe_size.
It will not change any existing functionality.
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
We can't guarntee the batched stripe to be set with STRIPE_HANDLE since
there are lots of functions could set the flag, such as sync_request,
ops_complete_* and end_{read,write}_request etc.
Also clear_batch_ready called in handle_stripe ensures the batched list
can't continue to be handled by handle_stripe.
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
To make people understand the function well, let's put the comment to
the right place.
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
We tried to only put the head sh of batch list to handle_list, then the
handle_stripe doesn't handle other members in the batch list. However,
we still got the calltrace in break_stripe_batch_list.
[593764.644269] stripe state: 2003
kernel: [593764.644299] ------------[ cut here ]------------
kernel: [593764.644308] WARNING: CPU: 12 PID: 856 at drivers/md/raid5.c:4625 break_stripe_batch_list+0x203/0x240 [raid456]
[...]
kernel: [593764.644363] Call Trace:
kernel: [593764.644370] handle_stripe+0x907/0x20c0 [raid456]
kernel: [593764.644376] ? __wake_up_common_lock+0x89/0xc0
kernel: [593764.644379] handle_active_stripes.isra.57+0x35f/0x570 [raid456]
kernel: [593764.644382] ? raid5_wakeup_stripe_thread+0x96/0x1f0 [raid456]
kernel: [593764.644385] raid5d+0x480/0x6a0 [raid456]
kernel: [593764.644390] ? md_thread+0x11f/0x160
kernel: [593764.644392] md_thread+0x11f/0x160
kernel: [593764.644394] ? wait_woken+0x80/0x80
kernel: [593764.644396] kthread+0xfc/0x130
kernel: [593764.644398] ? find_pers+0x70/0x70
kernel: [593764.644399] ? kthread_create_on_node+0x70/0x70
kernel: [593764.644401] ret_from_fork+0x1f/0x30
As we can see, the stripe was set with STRIPE_ACTIVE and STRIPE_HANDLE,
and only handle_stripe could set those flags then return. And since the
stipe was already in the batch list, we need to return earlier before
set the two flags.
And after dig a little about git history especially commit 3664847d95
("md/raid5: fix a race condition in stripe batch"), it seems the batched
stipe still could be handled by handle_stipe, then handle_stipe needs to
return earlier if clear_batch_ready to return true.
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Remove the if statement around the calls to sysfs_link_rdev() to avoid
the compilation warning "suggest braces around empty body in an ‘if’
statement" when compiling with W=1.
Also fix function description comments to avoid kdoc format warnings.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
The following deadlock was captured. The first process is holding 'kernfs_mutex'
and hung by io. The io was staging in 'r1conf.pending_bio_list' of raid1 device,
this pending bio list would be flushed by second process 'md127_raid1', but
it was hung by 'kernfs_mutex'. Using sysfs_notify_dirent_safe() to replace
sysfs_notify() can fix it. There were other sysfs_notify() invoked from io
path, removed all of them.
PID: 40430 TASK: ffff8ee9c8c65c40 CPU: 29 COMMAND: "probe_file"
#0 [ffffb87c4df37260] __schedule at ffffffff9a8678ec
#1 [ffffb87c4df372f8] schedule at ffffffff9a867f06
#2 [ffffb87c4df37310] io_schedule at ffffffff9a0c73e6
#3 [ffffb87c4df37328] __dta___xfs_iunpin_wait_3443 at ffffffffc03a4057 [xfs]
#4 [ffffb87c4df373a0] xfs_iunpin_wait at ffffffffc03a6c79 [xfs]
#5 [ffffb87c4df373b0] __dta_xfs_reclaim_inode_3357 at ffffffffc039a46c [xfs]
#6 [ffffb87c4df37400] xfs_reclaim_inodes_ag at ffffffffc039a8b6 [xfs]
#7 [ffffb87c4df37590] xfs_reclaim_inodes_nr at ffffffffc039bb33 [xfs]
#8 [ffffb87c4df375b0] xfs_fs_free_cached_objects at ffffffffc03af0e9 [xfs]
#9 [ffffb87c4df375c0] super_cache_scan at ffffffff9a287ec7
#10 [ffffb87c4df37618] shrink_slab at ffffffff9a1efd93
#11 [ffffb87c4df37700] shrink_node at ffffffff9a1f5968
#12 [ffffb87c4df37788] do_try_to_free_pages at ffffffff9a1f5ea2
#13 [ffffb87c4df377f0] try_to_free_mem_cgroup_pages at ffffffff9a1f6445
#14 [ffffb87c4df37880] try_charge at ffffffff9a26cc5f
#15 [ffffb87c4df37920] memcg_kmem_charge_memcg at ffffffff9a270f6a
#16 [ffffb87c4df37958] new_slab at ffffffff9a251430
#17 [ffffb87c4df379c0] ___slab_alloc at ffffffff9a251c85
#18 [ffffb87c4df37a80] __slab_alloc at ffffffff9a25635d
#19 [ffffb87c4df37ac0] kmem_cache_alloc at ffffffff9a251f89
#20 [ffffb87c4df37b00] alloc_inode at ffffffff9a2a2b10
#21 [ffffb87c4df37b20] iget_locked at ffffffff9a2a4854
#22 [ffffb87c4df37b60] kernfs_get_inode at ffffffff9a311377
#23 [ffffb87c4df37b80] kernfs_iop_lookup at ffffffff9a311e2b
#24 [ffffb87c4df37ba8] lookup_slow at ffffffff9a290118
#25 [ffffb87c4df37c10] walk_component at ffffffff9a291e83
#26 [ffffb87c4df37c78] path_lookupat at ffffffff9a293619
#27 [ffffb87c4df37cd8] filename_lookup at ffffffff9a2953af
#28 [ffffb87c4df37de8] user_path_at_empty at ffffffff9a295566
#29 [ffffb87c4df37e10] vfs_statx at ffffffff9a289787
#30 [ffffb87c4df37e70] SYSC_newlstat at ffffffff9a289d5d
#31 [ffffb87c4df37f18] sys_newlstat at ffffffff9a28a60e
#32 [ffffb87c4df37f28] do_syscall_64 at ffffffff9a003949
#33 [ffffb87c4df37f50] entry_SYSCALL_64_after_hwframe at ffffffff9aa001ad
RIP: 00007f617a5f2905 RSP: 00007f607334f838 RFLAGS: 00000246
RAX: ffffffffffffffda RBX: 00007f6064044b20 RCX: 00007f617a5f2905
RDX: 00007f6064044b20 RSI: 00007f6064044b20 RDI: 00007f6064005890
RBP: 00007f6064044aa0 R8: 0000000000000030 R9: 000000000000011c
R10: 0000000000000013 R11: 0000000000000246 R12: 00007f606417e6d0
R13: 00007f6064044aa0 R14: 00007f6064044b10 R15: 00000000ffffffff
ORIG_RAX: 0000000000000006 CS: 0033 SS: 002b
PID: 927 TASK: ffff8f15ac5dbd80 CPU: 42 COMMAND: "md127_raid1"
#0 [ffffb87c4df07b28] __schedule at ffffffff9a8678ec
#1 [ffffb87c4df07bc0] schedule at ffffffff9a867f06
#2 [ffffb87c4df07bd8] schedule_preempt_disabled at ffffffff9a86825e
#3 [ffffb87c4df07be8] __mutex_lock at ffffffff9a869bcc
#4 [ffffb87c4df07ca0] __mutex_lock_slowpath at ffffffff9a86a013
#5 [ffffb87c4df07cb0] mutex_lock at ffffffff9a86a04f
#6 [ffffb87c4df07cc8] kernfs_find_and_get_ns at ffffffff9a311d83
#7 [ffffb87c4df07cf0] sysfs_notify at ffffffff9a314b3a
#8 [ffffb87c4df07d18] md_update_sb at ffffffff9a688696
#9 [ffffb87c4df07d98] md_update_sb at ffffffff9a6886d5
#10 [ffffb87c4df07da8] md_check_recovery at ffffffff9a68ad9c
#11 [ffffb87c4df07dd0] raid1d at ffffffffc01f0375 [raid1]
#12 [ffffb87c4df07ea0] md_thread at ffffffff9a680348
#13 [ffffb87c4df07f08] kthread at ffffffff9a0b8005
#14 [ffffb87c4df07f50] ret_from_fork at ffffffff9aa00344
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
generic_make_request has always been very confusingly misnamed, so rename
it to submit_bio_noacct to make it clear that it is submit_bio minus
accounting and a few checks.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Code comments of scribble_alloc() is outdated for a while. This patch
update the comments in function header for the new parameter list.
Suggested-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Song Liu <songliubraving@fb.com>
Using GFP_NOIO flag to call scribble_alloc() from resize_chunk() does
not have the expected behavior. kvmalloc_array() inside scribble_alloc()
which receives the GFP_NOIO flag will eventually call kmalloc_node() to
allocate physically continuous pages.
Now we have memalloc scope APIs in mddev_suspend()/mddev_resume() to
prevent memory reclaim I/Os during raid array suspend context, calling
to kvmalloc_array() with GFP_KERNEL flag may avoid deadlock of recursive
I/O as expected.
This patch removes the useless gfp flags from parameters list of
scribble_alloc(), and call kvmalloc_array() with GFP_KERNEL flag. The
incorrect GFP_NOIO flag does not exist anymore.
Fixes: b330e6a49d ("md: convert to kvmalloc")
Suggested-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Song Liu <songliubraving@fb.com>
We can use "cnt" directly to update conf->worker_cnt_per_group
if alloc_thread_groups returns 0.
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
With commit 6ce220dd2f ("raid5: don't set
STRIPE_HANDLE to stripe which is in batch list"), we don't want to set
STRIPE_HANDLE flag for sh which is already in batch list.
However, the stripe which is the head of batch list should set this flag,
otherwise panic could happen inside init_stripe at BUG_ON(sh->batch_head),
it is reproducible with raid5 on top of nvdimm devices per Xiao oberserved.
Thanks for Xiao's effort to verify the change.
Fixes: 6ce220dd2f ("raid5: don't set STRIPE_HANDLE to stripe which is in batch list")
Reported-by: Xiao Ni <xni@redhat.com>
Tested-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
As it is consistent with prefixes of other write life time hints.
Signed-off-by: Eugene Syromiatnikov <esyr@redhat.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
If pers->make_request fails in md_flush_request(), the bio is lost. To
fix this, pass back a bool to indicate if the original make_request call
should continue to handle the I/O and instead of assuming the flush logic
will push it to completion.
Convert md_flush_request to return a bool and no longer calls the raid
driver's make_request function. If the return is true, then the md flush
logic has or will complete the bio and the md make_request call is done.
If false, then the md make_request function needs to keep processing like
it is a normal bio. Let the original call to md_handle_request handle any
need to retry sending the bio to the raid driver's make_request function
should it be needed.
Also mark md_flush_request and the make_request function pointer as
__must_check to issue warnings should these critical return values be
ignored.
Fixes: 2bc13b83e6 ("md: batch flush requests.")
Cc: stable@vger.kernel.org # # v4.19+
Cc: NeilBrown <neilb@suse.com>
Signed-off-by: David Jeffery <djeffery@redhat.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
This stripe state is not used anymore after commit 51acbcec6c
("md: remove CONFIG_MULTICORE_RAID456"), so remove the obsoleted
state.
gjiang@nb01257:~/md$ grep STRIPE_OPS_REQ_PENDING drivers/md/ -r
drivers/md/raid5.c: (1 << STRIPE_OPS_REQ_PENDING) |
drivers/md/raid5.h: STRIPE_OPS_REQ_PENDING,
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
If stripe in batch list is set with STRIPE_HANDLE flag, then the stripe
could be set with STRIPE_ACTIVE by the handle_stripe function. And if
error happens to the batch_head at the same time, break_stripe_batch_list
is called, then below warning could happen (the same report in [1]), it
means a member of batch list was set with STRIPE_ACTIVE.
[7028915.431770] stripe state: 2001
[7028915.431815] ------------[ cut here ]------------
[7028915.431828] WARNING: CPU: 18 PID: 29089 at drivers/md/raid5.c:4614 break_stripe_batch_list+0x203/0x240 [raid456]
[...]
[7028915.431879] CPU: 18 PID: 29089 Comm: kworker/u82:5 Tainted: G O 4.14.86-1-storage #4.14.86-1.2~deb9
[7028915.431881] Hardware name: Supermicro SSG-2028R-ACR24L/X10DRH-iT, BIOS 3.1 06/18/2018
[7028915.431888] Workqueue: raid5wq raid5_do_work [raid456]
[7028915.431890] task: ffff9ab0ef36d7c0 task.stack: ffffb72926f84000
[7028915.431896] RIP: 0010:break_stripe_batch_list+0x203/0x240 [raid456]
[7028915.431898] RSP: 0018:ffffb72926f87ba8 EFLAGS: 00010286
[7028915.431900] RAX: 0000000000000012 RBX: ffff9aaa84a98000 RCX: 0000000000000000
[7028915.431901] RDX: 0000000000000000 RSI: ffff9ab2bfa15458 RDI: ffff9ab2bfa15458
[7028915.431902] RBP: ffff9aaa8fb4e900 R08: 0000000000000001 R09: 0000000000002eb4
[7028915.431903] R10: 00000000ffffffff R11: 0000000000000000 R12: ffff9ab1736f1b00
[7028915.431904] R13: 0000000000000000 R14: ffff9aaa8fb4e900 R15: 0000000000000001
[7028915.431906] FS: 0000000000000000(0000) GS:ffff9ab2bfa00000(0000) knlGS:0000000000000000
[7028915.431907] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[7028915.431908] CR2: 00007ff953b9f5d8 CR3: 0000000bf4009002 CR4: 00000000003606e0
[7028915.431909] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[7028915.431910] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[7028915.431910] Call Trace:
[7028915.431923] handle_stripe+0x8e7/0x2020 [raid456]
[7028915.431930] ? __wake_up_common_lock+0x89/0xc0
[7028915.431935] handle_active_stripes.isra.58+0x35f/0x560 [raid456]
[7028915.431939] raid5_do_work+0xc6/0x1f0 [raid456]
Also commit 59fc630b8b ("RAID5: batch adjacent full stripe write")
said "If a stripe is added to batch list, then only the first stripe
of the list should be put to handle_list and run handle_stripe."
So don't set STRIPE_HANDLE to stripe which is already in batch list,
otherwise the stripe could be put to handle_list and run handle_stripe,
then the above warning could be triggered.
[1]. https://www.spinics.net/lists/raid/msg62552.html
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
While MD continues to count read errors returned by the lower layer.
If those errors are -EILSEQ, instead of -EIO, it should NOT increase
the read_errors count.
When RAID6 is set up on dm-integrity target that detects massive
corruption, the leg will be ejected from the array. Even if the
issue is correctable with a sector re-write and the array has
necessary redundancy to correct it.
The leg is ejected because it runs up the rdev->read_errors beyond
conf->max_nr_stripes. The return status in dm-drypt when there is
a data integrity error is -EILSEQ (BLK_STS_PROTECTION).
Signed-off-by: Nigel Croxon <ncroxon@redhat.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Often limits can be changed by admin. When discussing such things
it helps if you can provide "self-sustained" facts. Also
sometimes the admin thinks he changed a limit, but it did not
take effect for some reason or he changed the wrong thing.
V3: Only pr_warn when Faulty is 0.
V2: Add read_errors value to pr_warn.
Signed-off-by: Nigel Croxon <ncroxon@redhat.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
7471fb77ce ("md/raid6: Fix anomily when recovering a single device in
RAID6.") avoids rereading P when it can be computed from other members.
However, this misses the chance to re-write the right data to P. This
patch sets R5_ReadError if the re-read fails.
Also, when re-read is skipped, we also missed the chance to reset
rdev->read_errors to 0. It can fail the disk when there are many read
errors on P member disk (other disks don't have read error)
V2: upper layer read request don't read parity/Q data. So there is no
need to consider such situation.
This is Reported-by: kbuild test robot <lkp@intel.com>
Fixes: 7471fb77ce ("md/raid6: Fix anomily when recovering a single device in RAID6.")
Cc: <stable@vger.kernel.org> #4.4+
Signed-off-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
We only need the number of segments in the blk-mq submission path.
Remove the field from struct bio, and return it from a variant of
blk_queue_split instead of that it can passed as an argument to
those functions that need the value.
This also means we stop recounting segments except for cloning
and partial segments.
To keep the number of arguments in this how path down remove
pointless struct request_queue arguments from any of the functions
that had it and grew a nr_segs argument.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
commit d5d885fd51 ("md: introduce new personality funciton start()")
splits the init job to two parts. The first part run() does the jobs that
do not require the md threads. The second part start() does the jobs that
require the md threads.
Now it just does run() in adding new journal device. It needs to do the
second part start() too.
Fixes: d5d885fd51 ("md: introduce new personality funciton start()")
Cc: stable@vger.kernel.org #v4.9+
Reported-by: Michal Soltys <soltys@ziu.info>
Signed-off-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 or at your option any
later version you should have received a copy of the gnu general
public license for example usr src linux copying if not write to the
free software foundation inc 675 mass ave cambridge ma 02139 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 20 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190520170858.552543146@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The problem is that any 'uptodate' vs 'disks' check is not precise
in this path. Put a "WARN_ON(!test_bit(R5_UPTODATE, &dev->flags)" on the
device that might try to kick off writes and then skip the action.
Better to prevent the raid driver from taking unexpected action *and* keep
the system alive vs killing the machine with BUG_ON.
Note: fixed warning reported by kbuild test robot <lkp@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Nigel Croxon <ncroxon@redhat.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
This reverts commit 4f4fd7c579.
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Nigel Croxon <ncroxon@redhat.com>
Cc: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
This tells sparse that we release and reacquire the device_lock and
avoids a warning.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <songliubraving@fb.com>
This tells sparse that we acquire/release the two stripe locks and
avoids a warning.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <songliubraving@fb.com>
Changing state from check_state_check_result to
check_state_compute_result not only is unsafe but also doesn't
appear to serve a valid purpose. A raid6 check should only be
pushing out extra writes if doing repair and a mis-match occurs.
The stripe dev management will already try and do repair writes
for failing sectors.
This patch makes the raid6 check_state_check_result handling
work more like raid5's. If somehow too many failures for a
check, just quit the check operation for the stripe. When any
checks pass, don't try and use check_state_compute_result for
a purpose it isn't needed for and is unsafe for. Just mark the
stripe as in sync for passing its parity checks and let the
stripe dev read/write code and the bad blocks list do their
job handling I/O errors.
Repro steps from Xiao:
These are the steps to reproduce this problem:
1. redefined OPT_MEDIUM_ERR_ADDR to 12000 in scsi_debug.c
2. insmod scsi_debug.ko dev_size_mb=11000 max_luns=1 num_tgts=1
3. mdadm --create /dev/md127 --level=6 --raid-devices=5 /dev/sde1 /dev/sde2 /dev/sde3 /dev/sde5 /dev/sde6
sde is the disk created by scsi_debug
4. echo "2" >/sys/module/scsi_debug/parameters/opts
5. raid-check
It panic:
[ 4854.730899] md: data-check of RAID array md127
[ 4854.857455] sd 5:0:0:0: [sdr] tag#80 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4854.859246] sd 5:0:0:0: [sdr] tag#80 Sense Key : Medium Error [current]
[ 4854.860694] sd 5:0:0:0: [sdr] tag#80 Add. Sense: Unrecovered read error
[ 4854.862207] sd 5:0:0:0: [sdr] tag#80 CDB: Read(10) 28 00 00 00 2d 88 00 04 00 00
[ 4854.864196] print_req_error: critical medium error, dev sdr, sector 11656 flags 0
[ 4854.867409] sd 5:0:0:0: [sdr] tag#100 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4854.869469] sd 5:0:0:0: [sdr] tag#100 Sense Key : Medium Error [current]
[ 4854.871206] sd 5:0:0:0: [sdr] tag#100 Add. Sense: Unrecovered read error
[ 4854.872858] sd 5:0:0:0: [sdr] tag#100 CDB: Read(10) 28 00 00 00 2e e0 00 00 08 00
[ 4854.874587] print_req_error: critical medium error, dev sdr, sector 12000 flags 4000
[ 4854.876456] sd 5:0:0:0: [sdr] tag#101 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4854.878552] sd 5:0:0:0: [sdr] tag#101 Sense Key : Medium Error [current]
[ 4854.880278] sd 5:0:0:0: [sdr] tag#101 Add. Sense: Unrecovered read error
[ 4854.881846] sd 5:0:0:0: [sdr] tag#101 CDB: Read(10) 28 00 00 00 2e e8 00 00 08 00
[ 4854.883691] print_req_error: critical medium error, dev sdr, sector 12008 flags 4000
[ 4854.893927] sd 5:0:0:0: [sdr] tag#166 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4854.896002] sd 5:0:0:0: [sdr] tag#166 Sense Key : Medium Error [current]
[ 4854.897561] sd 5:0:0:0: [sdr] tag#166 Add. Sense: Unrecovered read error
[ 4854.899110] sd 5:0:0:0: [sdr] tag#166 CDB: Read(10) 28 00 00 00 2e e0 00 00 10 00
[ 4854.900989] print_req_error: critical medium error, dev sdr, sector 12000 flags 0
[ 4854.902757] md/raid:md127: read error NOT corrected!! (sector 9952 on sdr1).
[ 4854.904375] md/raid:md127: read error NOT corrected!! (sector 9960 on sdr1).
[ 4854.906201] ------------[ cut here ]------------
[ 4854.907341] kernel BUG at drivers/md/raid5.c:4190!
raid5.c:4190 above is this BUG_ON:
handle_parity_checks6()
...
BUG_ON(s->uptodate < disks - 1); /* We don't need Q to recover */
Cc: <stable@vger.kernel.org> # v3.16+
OriginalAuthor: David Jeffery <djeffery@redhat.com>
Cc: Xiao Ni <xni@redhat.com>
Tested-by: David Jeffery <djeffery@redhat.com>
Signed-off-by: David Jeffy <djeffery@redhat.com>
Signed-off-by: Nigel Croxon <ncroxon@redhat.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=qBae
-----END PGP SIGNATURE-----
Merge tag 'for-5.1/block-post-20190315' of git://git.kernel.dk/linux-block
Pull more block layer changes from Jens Axboe:
"This is a collection of both stragglers, and fixes that came in after
I finalized the initial pull. This contains:
- An MD pull request from Song, with a few minor fixes
- Set of NVMe patches via Christoph
- Pull request from Konrad, with a few fixes for xen/blkback
- pblk fix IO calculation fix (Javier)
- Segment calculation fix for pass-through (Ming)
- Fallthrough annotation for blkcg (Mathieu)"
* tag 'for-5.1/block-post-20190315' of git://git.kernel.dk/linux-block: (25 commits)
blkcg: annotate implicit fall through
nvme-tcp: support C2HData with SUCCESS flag
nvmet: ignore EOPNOTSUPP for discard
nvme: add proper write zeroes setup for the multipath device
nvme: add proper discard setup for the multipath device
nvme: remove nvme_ns_config_oncs
nvme: disable Write Zeroes for qemu controllers
nvmet-fc: bring Disconnect into compliance with FC-NVME spec
nvmet-fc: fix issues with targetport assoc_list list walking
nvme-fc: reject reconnect if io queue count is reduced to zero
nvme-fc: fix numa_node when dev is null
nvme-fc: use nr_phys_segments to determine existence of sgl
nvme-loop: init nvmet_ctrl fatal_err_work when allocate
nvme: update comment to make the code easier to read
nvme: put ns_head ref if namespace fails allocation
nvme-trace: fix cdw10 buffer overrun
nvme: don't warn on block content change effects
nvme: add get-feature to admin cmds tracer
md: Fix failed allocation of md_register_thread
It's wrong to add len to sector_nr in raid10 reshape twice
...
mddev->sync_thread can be set to NULL on kzalloc failure downstream.
The patch checks for such a scenario and frees allocated resources.
Committer node:
Added similar fix to raid5.c, as suggested by Guoqing.
Cc: stable@vger.kernel.org # v3.16+
Acked-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: Song Liu <songliubraving@fb.com>
When the Partial Parity Log is enabled, circular buffer is used to store
PPL data. Each write to RAID device causes overwrite of data in this buffer
so some write_hint can be set to those request to help drives handle
garbage collection. This patch adds new sysfs attribute which can be used
to specify which write_hint should be assigned to PPL.
Acked-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: Mariusz Dabrowski <mariusz.dabrowski@intel.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
The code really just wants a big flat buffer, so just do that.
Link: http://lkml.kernel.org/r/20181217131929.11727-3-kent.overstreet@gmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Reviewed-by: Matthew Wilcox <willy@infradead.org>
Cc: Shaohua Li <shli@kernel.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Eric Paris <eparis@parisplace.org>
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Pravin B Shelar <pshelar@ovn.org>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This fixes the case when md array assembly fails because of raid cache recovery
unable to allocate a stripe, despite attempts to replay stripes and increase
cache size. This happens because stripes released by r5c_recovery_replay_stripes
and raid5_set_cache_size don't become available for allocation immediately.
Released stripes first are placed on conf->released_stripes list and require
md thread to merge them on conf->inactive_list before they can be allocated.
Patch allows final allocation attempt during cache recovery to wait for
new stripes to become availabe for allocation.
Cc: linux-raid@vger.kernel.org
Cc: Shaohua Li <shli@kernel.org>
Cc: linux-stable <stable@vger.kernel.org> # 4.10+
Fixes: b4c625c673 ("md/r5cache: r5cache recovery: part 1")
Signed-off-by: Alexei Naberezhnov <anaberezhnov@fb.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Currently there is an inconsistency for failing the member drives
for arrays with different RAID levels. For RAID456 - there is a possibility
to fail all of the devices. However - for other RAID levels - kernel blocks
removing the member drive, if the operation results in array's FAIL state
(EBUSY is returned). For example - removing last drive from RAID1 is not
possible.
This kind of blocker was never implemented for raid456 and we cannot see
the reason why.
We had tested following patch and did not observe any regression, so do you
have any comments/reasons for current approach, or we can send the proper
patch for this?
Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@intel.com>
Signed-off-by: Shaohua Li <shli@fb.com>
We don't support reshape yet if an array supports log device. Previously we
determine the fact by checking ->log. However, ->log could be NULL after a log
device is removed, but the array is still marked to support log device. Don't
allow reshape in this case too. User can disable log device support by setting
'consistency_policy' to 'resync' then do reshape.
Reported-by: Xiao Ni <xni@redhat.com>
Tested-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Pull input updates from Dmitry Torokhov:
- a new driver for Rohm BU21029 touch controller
- new bitmap APIs: bitmap_alloc, bitmap_zalloc and bitmap_free
- updates to Atmel, eeti. pxrc and iforce drivers
- assorted driver cleanups and fixes.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (57 commits)
MAINTAINERS: Add PhoenixRC Flight Controller Adapter
Input: do not use WARN() in input_alloc_absinfo()
Input: mark expected switch fall-throughs
Input: raydium_i2c_ts - use true and false for boolean values
Input: evdev - switch to bitmap API
Input: gpio-keys - switch to bitmap_zalloc()
Input: elan_i2c_smbus - cast sizeof to int for comparison
bitmap: Add bitmap_alloc(), bitmap_zalloc() and bitmap_free()
md: Avoid namespace collision with bitmap API
dm: Avoid namespace collision with bitmap API
Input: pm8941-pwrkey - add resin entry
Input: pm8941-pwrkey - abstract register offsets and event code
Input: iforce - reorganize joystick configuration lists
Input: atmel_mxt_ts - move completion to after config crc is updated
Input: atmel_mxt_ts - don't report zero pressure from T9
Input: atmel_mxt_ts - zero terminate config firmware file
Input: atmel_mxt_ts - refactor config update code to add context struct
Input: atmel_mxt_ts - config CRC may start at T71
Input: atmel_mxt_ts - remove unnecessary debug on ENOMEM
Input: atmel_mxt_ts - remove duplicate setup of ABS_MT_PRESSURE
...
During raid5 replacement, the stripes can be marked with R5_NeedReplace
flag. Data can be read from being-replaced devices and written to
replacing spares without reading all other devices. (It's 'replace'
mode. s.replacing = 1) If a being-replaced device is dropped, the
replacement progress will be interrupted and resumed with pure recovery
mode. However, existing stripes before being interrupted cannot read
from the dropped device anymore. It prints lots of WARN_ON messages.
And it results in data corruption because existing stripes write
problematic data into its replacement device and update the progress.
\# Erase disks (1MB + 2GB)
dd if=/dev/zero of=/dev/sda bs=1MB count=2049
dd if=/dev/zero of=/dev/sdb bs=1MB count=2049
dd if=/dev/zero of=/dev/sdc bs=1MB count=2049
dd if=/dev/zero of=/dev/sdd bs=1MB count=2049
mdadm -C /dev/md0 -amd -R -l5 -n3 -x0 /dev/sd[abc] -z 2097152
\# Ensure array stores non-zero data
dd if=/root/data_4GB.iso of=/dev/md0 bs=1MB
\# Start replacement
mdadm /dev/md0 -a /dev/sdd
mdadm /dev/md0 --replace /dev/sda
Then, Hot-plug out /dev/sda during recovery, and wait for recovery done.
echo check > /sys/block/md0/md/sync_action
cat /sys/block/md0/md/mismatch_cnt # it will be greater than 0.
Soon after you hot-plug out /dev/sda, you will see many WARN_ON
messages. The replacement recovery will be interrupted shortly. After
the recovery finishes, it will result in data corruption.
Actually, it's just an unhandled case of replacement. In commit
<f94c0b6658c7> (md/raid5: fix interaction of 'replace' and 'recovery'.),
if a NeedReplace device is not UPTODATE then that is an error, the
commit just simply print WARN_ON but also mark these corrupted stripes
with R5_WantReplace. (it means it's ready for writes.)
To fix this case, we can leverage 'sync and replace' mode mentioned in
commit <9a3e1101b827> (md/raid5: detect and handle replacements during
recovery.). We can add logics to detect and use 'sync and replace' mode
for these stripes.
Reported-by: Alex Chen <alexchen@synology.com>
Reviewed-by: Alex Wu <alexwu@synology.com>
Reviewed-by: Chung-Chiang Cheng <cccheng@synology.com>
Signed-off-by: BingJing Chang <bingjingc@synology.com>
Signed-off-by: Shaohua Li <shli@fb.com>
bitmap API (include/linux/bitmap.h) has 'bitmap' prefix for its methods.
On the other hand MD bitmap API is special case.
Adding 'md' prefix to it to avoid name space collision.
No functional changes intended.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Shaohua Li <shli@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
There is no need to invoke release_inactive_stripe_list() with interrupts
disabled. All call sites, except raid5_release_stripe(), unlock
->device_lock and enable interrupts before invoking the function.
Make it consistent.
Cc: Shaohua Li <shli@kernel.org>
Cc: linux-raid@vger.kernel.org
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Shaohua Li <shli@fb.com>
The irqsave variant of atomic_dec_and_lock handles irqsave/restore when
taking/releasing the spin lock. With this variant the call of
local_irq_save is no longer required.
Cc: Shaohua Li <shli@kernel.org>
Cc: linux-raid@vger.kernel.org
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Shaohua Li <shli@fb.com>
Pull MD updates from Shaohua Li:
"A few fixes of MD for this merge window. Mostly bug fixes:
- raid5 stripe batch fix from Amy
- Read error handling for raid1 FailFast device from Gioh
- raid10 recovery NULL pointer dereference fix from Guoqing
- Support write hint for raid5 stripe cache from Mariusz
- Fixes for device hot add/remove from Neil and Yufen
- Improve flush bio scalability from Xiao"
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md:
MD: fix lock contention for flush bios
md/raid5: Assigning NULL to sh->batch_head before testing bit R5_Overlap of a stripe
md/raid1: add error handling of read error from FailFast device
md: fix NULL dereference of mddev->pers in remove_and_add_spares()
raid5: copy write hint from origin bio to stripe
md: fix two problems with setting the "re-add" device state.
raid10: check bio in r10buf_pool_free to void NULL pointer dereference
md: fix an error code format and remove unsed bio_sector
In add_stripe_bio(), if the stripe_head is in batch list, the incoming
bio is regarded as overlapping, and the bit R5_Overlap on this stripe_head
is set. break_stripe_batch_list() checks bit R5_Overlap on each stripe_head
first then assigns NULL to sh->batch_head.
If break_stripe_batch_list() checks bit R5_Overlap on stripe_head A
after add_stripe_bio() finds stripe_head A is in batch list and before
add_stripe_bio() sets bit R5_Overlapt of stripe_head A,
break_stripe_batch_list() would not know there's a process in
wait_for_overlap and needs to call wake_up(). There's a huge chance a
process never returns from schedule() if add_stripe_bio() is called
from raid5_make_request().
In break_stripe_batch_list(), assigning NULL to sh->batch_head should
be done before it checks bit R5_Overlap of a stripe_head.
Signed-off-by: Amy Chiang <amychiang@qnap.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Store write hint from original bio in stripe head so it can be assigned
to bio sent to each RAID device.
Signed-off-by: Mariusz Dabrowski <mariusz.dabrowski@intel.com>
Reviewed-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Reviewed-by: Pawel Baldysiak <pawel.baldysiak@intel.com>
Signed-off-by: Shaohua Li <shli@fb.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=RVhK
-----END PGP SIGNATURE-----
Merge tag 'for-4.17/block-20180402' of git://git.kernel.dk/linux-block
Pull block layer updates from Jens Axboe:
"It's a pretty quiet round this time, which is nice. This contains:
- series from Bart, cleaning up the way we set/test/clear atomic
queue flags.
- series from Bart, fixing races between gendisk and queue
registration and removal.
- set of bcache fixes and improvements from various folks, by way of
Michael Lyle.
- set of lightnvm updates from Matias, most of it being the 1.2 to
2.0 transition.
- removal of unused DIO flags from Nikolay.
- blk-mq/sbitmap memory ordering fixes from Omar.
- divide-by-zero fix for BFQ from Paolo.
- minor documentation patches from Randy.
- timeout fix from Tejun.
- Alpha "can't write a char atomically" fix from Mikulas.
- set of NVMe fixes by way of Keith.
- bsg and bsg-lib improvements from Christoph.
- a few sed-opal fixes from Jonas.
- cdrom check-disk-change deadlock fix from Maurizio.
- various little fixes, comment fixes, etc from various folks"
* tag 'for-4.17/block-20180402' of git://git.kernel.dk/linux-block: (139 commits)
blk-mq: Directly schedule q->timeout_work when aborting a request
blktrace: fix comment in blktrace_api.h
lightnvm: remove function name in strings
lightnvm: pblk: remove some unnecessary NULL checks
lightnvm: pblk: don't recover unwritten lines
lightnvm: pblk: implement 2.0 support
lightnvm: pblk: implement get log report chunk
lightnvm: pblk: rename ppaf* to addrf*
lightnvm: pblk: check for supported version
lightnvm: implement get log report chunk helpers
lightnvm: make address conversions depend on generic device
lightnvm: add support for 2.0 address format
lightnvm: normalize geometry nomenclature
lightnvm: complete geo structure with maxoc*
lightnvm: add shorten OCSSD version in geo
lightnvm: add minor version to generic geometry
lightnvm: simplify geometry structure
lightnvm: pblk: refactor init/exit sequences
lightnvm: Avoid validation of default op value
lightnvm: centralize permission check for lightnvm ioctl
...
This patch has been generated as follows:
for verb in set_unlocked clear_unlocked set clear; do
replace-in-files queue_flag_${verb} blk_queue_flag_${verb%_unlocked} \
$(git grep -lw queue_flag_${verb} drivers block/bsg*)
done
Except for protecting all queue flag changes with the queue lock
this patch does not change any functionality.
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Shaohua Li <shli@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
