A obvious editing mistake caught with a cppcheck warning
sound/soc/soc-pcm.c:2132:8: style: Variable 'ret' is reassigned a
value before the old one has been used. [redundantAssignment]
ret = soc_pcm_trigger(be_substream, cmd);
^
sound/soc/soc-pcm.c:2126:9: note: ret is assigned
ret = soc_pcm_trigger(be_substream,
^
sound/soc/soc-pcm.c:2129:9: note: ret is assigned
ret = soc_pcm_trigger(be_substream,
^
Fixes: 374b50e234 ('ASoC: soc-pcm: improve BE transition for TRIGGER_START')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220520210615.607229-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Adds the PCI ID for X-Fi cards sold under the Platnum and XtremeMusic names
Before: snd_ctxfi 0000:05:05.0: chip 20K1 model Unknown (1102:0021) is found
After: snd_ctxfi 0000:05:05.0: chip 20K1 model SB046x (1102:0021) is found
[ This is only about defining the model name string, and the rest is
handled just like before, as a default unknown device.
Edward confirmed that the stuff has been working fine -- tiwai ]
Signed-off-by: Edward Matijevic <motolav@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/cae7d1a4-8bd9-7dfe-7427-db7e766f7272@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The quirk entry for Focusrite Saffire 6 had no proper ep_idx for the
capture endpoint, and this confused the driver, resulting in the
broken sound. This patch adds the missing ep_idx in the entry.
While we are at it, a couple of other entries (for Digidesign MBox and
MOTU MicroBook II) seem to have the same problem, and those are
covered as well.
Fixes: bf6313a0ff ("ALSA: usb-audio: Refactor endpoint management")
Reported-by: André Kapelrud <a.kapelrud@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220521065325.426-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Maris reported that TEAC UD-501 (0644:8043) doesn't work with the
typical "clock source 41 is not valid, cannot use" errors on the
recent kernels. The currently known workaround so far is to restore
(partially) what we've done unconditionally at the clock setup;
namely, re-setup the USB interface immediately after the clock is
changed. This patch re-introduces the behavior conditionally for TEAC
devices.
Further notes:
- The USB interface shall be set later in
snd_usb_endpoint_configure(), but this seems to be too late.
- Even calling usb_set_interface() right after
sne_usb_init_sample_rate() doesn't help; so this must be related
with the clock validation, too.
- The device may still spew the "clock source 41 is not valid" error
at the first clock setup. This seems happening at the very first
try of clock setup, but it disappears at later attempts.
The error is likely harmless because the driver retries the clock
setup (such an error is more or less expected on some devices).
Fixes: bf6313a0ff ("ALSA: usb-audio: Refactor endpoint management")
Reported-and-tested-by: Maris Abele <maris7abele@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220521064627.29292-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
GCC 12 sees that it's technically possible for num_streams to be larger
than ARRAY_SIZE(pcm->streams). Bounds-check the iterator.
../sound/pci/lola/lola_pcm.c: In function 'lola_pcm_update':
../sound/pci/lola/lola_pcm.c:567:64: warning: array subscript [0, 31] is outside array bounds of 'struct lola_stream[16]' [-Warray-bounds]
567 | struct lola_stream *str = &pcm->streams[i];
| ~~~~~~~~~~~~^~~
In file included from ../sound/pci/lola/lola_pcm.c:15:
../sound/pci/lola/lola.h:307:28: note: while referencing 'streams'
307 | struct lola_stream streams[MAX_STREAM_COUNT];
| ^~~~~~~
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220520165537.2139826-1-keescook@chromium.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is rather late and at this point I'm expecting it to get merged in
the merge window rather than as a fix but if we get a -rc8 it's a small,
driver specific fix which should be fine to send.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmKHo04ACgkQJNaLcl1U
h9Ag3Qf8DodKNfpEaYOYfgnE/+VojHwnqLQlvedk9iA6Jzfo+3VwH9fI4ZGUVkdR
L/F8lkF6uQEyW4tcIdVylMejrItcuxQ2x3Ov7xmRcrZlpUueoI79DcDerR5kQTXE
f/rPXFKFwfuznPpZvs9maQ7YvLxnA88ZhLq/b0bLvkaL3FFtpI8+KOcslUph5/9X
uGBGaYj8AzAJVZIT0jG4R4iXD0DWyATcoS/vLIU3r3pkO1fw5R8IgG0UggMNJ/mW
G2iU/wO/QXHdX4OwO0wxojbrjCSLJBq5rbtwWIFCg2chz05gEgXNebzBAm2sijt4
fhPheCABCFfY5lIUtcpvxiLzJKbE+w==
=OBCV
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v5.18-rc7' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fix for v5.17
This is rather late and at this point I'm expecting it to get merged in
the merge window rather than as a fix but if we get a -rc8 it's a small,
driver specific fix which should be fine to send.
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
From the kernel point of view there are only few ops that needs to be exposed:
Hi,
SOF is using dma-trace (or dtrace) as a firmware tracing method, which is only
supported with IPC3 and it is not applicable for IPC4.
Currently the dtrace is 'open managed' regardless of IPC version (we do force
disable it for IPC4, but the dtrace calls remain in place).
From the kernel point of view there are only few ops that needs to be exposed
by the firmware tracing support and everything else is IPC private, should not
be known by the core.
This series converts the current dma-trace as ipc3 specific firmware tracing
sub-component and moves all private data out from generic code.
Regards,
Peter
---
Peter Ujfalusi (8):
ASoC: SOF: Introduce IPC independent ops for firmware tracing support
ASoC: SOF: Rename dtrace_is_supported flag to fw_trace_is_supported
ASoC: SOF: Clone the trace code to ipc3-dtrace as fw_tracing
implementation
ASoC: SOF: Switch to IPC generic firmware tracing
ASoC: SOF: ipc3-dtrace: Move host ops wrappers from generic header to
private
ASoC: SOF: Modify the host trace_init parameter list to include dmab
ASoC: SOF: Introduce opaque storage of private data for firmware
tracing
ASoC: SOF: ipc3-dtrace: Move dtrace related variables local from
sof_dev
sound/soc/sof/Makefile | 1 +
sound/soc/sof/amd/acp-trace.c | 4 +-
sound/soc/sof/amd/acp.h | 2 +-
sound/soc/sof/core.c | 13 +-
sound/soc/sof/debug.c | 2 +-
sound/soc/sof/intel/hda-dsp.c | 2 +-
sound/soc/sof/intel/hda-trace.c | 4 +-
sound/soc/sof/intel/hda.h | 2 +-
sound/soc/sof/ipc.c | 6 +
sound/soc/sof/ipc3-dtrace.c | 649 ++++++++++++++++++++++++++++++++
sound/soc/sof/ipc3-priv.h | 38 ++
sound/soc/sof/ipc3.c | 3 +-
sound/soc/sof/ops.c | 2 +-
sound/soc/sof/ops.h | 26 --
sound/soc/sof/pm.c | 8 +-
sound/soc/sof/sof-priv.h | 53 +--
sound/soc/sof/trace.c | 621 ++----------------------------
17 files changed, 767 insertions(+), 669 deletions(-)
create mode 100644 sound/soc/sof/ipc3-dtrace.c
--
2.36.1
Validation of signed input should be done before casting to unsigned int.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Suggested-by: Mark Brown <broonie@kernel.org>
Fixes: 2fbe467bcb ("ASoC: max98090: Reject invalid values in custom control put()")
Link: https://lore.kernel.org/r/1652999486-29653-1-git-send-email-khoroshilov@ispras.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
Add the ability to generate debug dumps on MediaTek SOF implementations.
From the datasheet, the only way to meet the lowest power consumption is
to pull low the 'pwdnn' gpio. But if it is low, IC will keep in
reset state, all registers reset to default.
And the power consumption is listed below
1. amp off and 'pwdnn' high => idle state, PVDD = 1mA, DVDD = 7mA
2. amp off and 'pwdnn' low => shutdown state, PVDD < 20uA, DVDD < 15uA
It's the large difference for the consumption current
This fix is to use pm_runtime and regcache to handle 'pwdnn' gpio
control.
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://lore.kernel.org/r/1652926418-8519-3-git-send-email-u0084500@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
RT1019 codec has two ways of controlling the en_spkr. one way is
controlling through gpio pin method the another way is through codec
register update through driver.
Now Speaker enable/disable is controlled through codec register updated
by codec driver. This patch reverts gpio logic.
This reverts commit 5c5f08f7fc ("ASoC:
amd: acp: Power on/off the speaker enable gpio pin based on DAPM
callback.")
Signed-off-by: V sujith kumar Reddy <Vsujithkumar.Reddy@amd.com>
Link: https://lore.kernel.org/r/20220516160619.17832-2-Vsujithkumar.Reddy@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
RT1019 codec has two ways of controlling the en_spkr. one way is
controlling through gpio pin method the another way is through codec
register update through driver.
Now Speaker enable/disable is controlled through codec register updated
by codec driver. This patch reverts gpio logic.
This reverts commit 7fa5c33d04 ("ASoC:
amd: acp: Set gpio_spkr_en to None for max speaker amplifer in machine
driver").
Signed-off-by: V sujith kumar Reddy <Vsujithkumar.Reddy@amd.com>
Link: https://lore.kernel.org/r/20220516160619.17832-1-Vsujithkumar.Reddy@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix the missing clk_disable_unprepare() before return
from wm2000_anc_transition() in the error handling case.
Fixes: 514cfd6dd7 ("ASoC: wm2000: Integrate with clock API")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220514091053.686416-1-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sound/soc/codecs/lpass-macro-common.c:28 lpass_macro_pds_init() warn: passing zero to 'PTR_ERR'
sound/soc/codecs/lpass-macro-common.c:38 lpass_macro_pds_init() warn: passing zero to 'PTR_ERR'
sound/soc/codecs/lpass-macro-common.c:54 lpass_macro_pds_init() warn: passing zero to 'ERR_PTR'
dev_pm_domain_attach_by_name() may return NULL, set 'ret' as
-ENODATA to fix this warning.
Fixes: 1a8ee4cf84 ("ASoC: codecs: Fix error handling in power domain init and exit handlers")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20220516120909.36356-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use pm_runtime_resume_and_get() to replace the pm_runtime_get_sync() and
pm_runtime_put_noidle() pattern.
No functional changes.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220517173715.468894-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix following checkincludes.pl warning:
sound/soc/sof/mediatek/mt8195/mt8195.c: linux/of_platform.h is included more than once.
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Link: https://lore.kernel.org/r/20220518125902.13407-1-wanjiabing@vivo.com
Signed-off-by: Mark Brown <broonie@kernel.org>
1.Add mtk-adsp-common.c file for mediatek platforms common usage.
2.Add mtk_adsp_dump implementation in mtk-adsp-common.c for general
debug dump.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: YC Hung <yc.hung@mediatek.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220517173109.468568-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
commit dcc2c012c7 ("ASoC: Fix gpiolib dependencies") removed a
series of unnecessary dependencies on GPIOLIB when the gpio was
optional.
A similar simplification seems valid for max98357a, so remove the
dependency as well. This will avoid the following warning
WARNING: unmet direct dependencies detected for SND_SOC_MAX98357A
Depends on [n]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && GPIOLIB [=n]
Selected by [y]:
- SND_SOC_INTEL_SOF_CS42L42_MACH [=y] && SOUND [=y] && !UML &&
SND [=y] && SND_SOC [=y] && SND_SOC_INTEL_MACH [=y] &&
(SND_SOC_SOF_HDA_LINK [=y] || SND_SOC_SOF_BAYTRAIL [=n]) && I2C
[=y] && ACPI [=y] && SND_HDA_CODEC_HDMI [=y] &&
SND_SOC_SOF_HDA_AUDIO_CODEC [=y] && (MFD_INTEL_LPSS [=y] ||
COMPILE_TEST [=n])
Reported-by: kernel test robot <yujie.liu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220517172647.468244-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The variables and structs for DMA trace can be moved local to ipc3-dtrace.c
and the storage can be allocated dynamically, stored behind the
fw_trace_data pointer.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Paul Olaru <paul.olaru@oss.nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220516104711.26115-9-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Firmware tracing implementations can allocate and store their privately
used data behind the fw_trace_pdata pointer instead of adding more
members to struct snd_sof_dev.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Paul Olaru <paul.olaru@oss.nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220516104711.26115-8-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Stop host code (AMD, Intel) to access sdev->dmatb directly.
Modify the trace_init prototype to include the pointer to a
struct snd_dma_buffer. The ipc3-dtrace passes for now the pointer to
sdev->dmatb, but the aim is to move all tracing related runtime information
local to a trace implementation.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Paul Olaru <paul.olaru@oss.nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220516104711.26115-7-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move the snd_sof_dma_trace_* ops wrappers from ops.h to ipc3-priv.h since
they are not used outside of IPC3 code.
While moving, rename them to sof_dtrace_host_*
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Paul Olaru <paul.olaru@oss.nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220516104711.26115-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Introduce new, generic API for firmware tracing with sof_fw_trace_ prefix
and switch to use it.
At the same time the old IPC3 code can be dropped from trace.c, which is
now a generic wrapper for the firmware tracing ops.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220516104711.26115-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The existing trace.c file is implementing the IPC3 dma-trace support.
Clone the existing code with prefix fixes as ipc3 fw_tracing
implementation to be used when the core is converted to use generic ops
for firmware tracing.
Drop the dual licensing of the content as the implementation is based on
debugfs.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220516104711.26115-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Rename the internal flag to not limit it's use for dma-trace, but to be
used for generic firmware tracing functionality.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220516104711.26115-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The current (dma-)trace is only supported with IPC3, it is not available
when IPC4 is used.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220516104711.26115-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Instead of using a private macro for an invalid grant reference use
the common one.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Tested-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> # Arm64 only
Signed-off-by: Juergen Gross <jgross@suse.com>
Fix following coccicheck error:
./sound/usb/endpoint.c:1671:8-10: ERROR: reference preceded by free on line 1671.
Here should be 'cp' rather than 'ip'.
Fixes: c11117b634 ("ALSA: usb-audio: Refcount multiple accesses on the single clock")
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Link: https://lore.kernel.org/r/20220518021617.10114-1-wanjiabing@vivo.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:
Part three of main AVS driver series. This series was originally part of
the initial series which was later divided [1] into smaller,
easier-to-review chunks. Thus, many patches found here were already
present on the list.
This series consists of code typical to many drivers - PCI driver
operations, trace ability, PM operations - as well as PCM handlers for
all standard audio interfaces, that is, HDA, I2S and DMIC are found
here.
Series starts with updating firmware boot flow - libraries are no longer
ignored. This change is dependent on already merged topology code [2]
and because of that could not be part of the initial series [1].
PCM operations are split into four changes. First component operations
alone i.e. operations which are usually agnostic towards path position
(FE/BE). Then it continues with "generic" FE operations - there is no
interface split here as from Intel ADSP point of view, FE, or HOST side
as it's called in the specs, involves HD-Audio operations only.
BE (also known as LINK) side on the other hand is divided into
"non-HD-Audio" and HD-Audio part. The former represents transfer over
DMIC and I2S interfaces both.
While patches implementing standard PCI driver operations along (again
standard) HD-Audio initialization routines followed up by power
management handlers are two major ones, series covers also other
important subjects such as:
While patches implementing standard PCI driver operations along (again
standard) HD-Audio initialization routines followed up by power
management handlers are two major ones, series covers also other
important subjects such as:
- event tracing
- preparation for firmware tracing (debugability)
- coredump (debugability)
- recovery flow (attempt recovery after IPC timeout or exception)
- D0ix (D0 device substate, complements standard power management)
Series is finalized by actual addition of supported platforms: SKL and
APL-based. Platform-specific files are limited to firmware-specific
bits, that is, bits that are specific to given firmware generation.
Everything else is shared and is part of already upstream messaging
code found in ipc.c, messages.c and messages.h files.
Changes in v3:
- addressed (hopefully) trace-code compilation under .configs with
CONFIG_FTRACE dropped
Changes in v2:
- usage of avs_releast_last_firmware() dropped in error path for library
loading procedure as suggested by Pierre
- 'link_mask' usage replaced with 'i2s_link_mask' as requested by
Pierre. Existing code addressed with new patch:
"ASoC: Intel: avs: Replace link_mask usage with i2s_link_mask"
- fixed possible race during recovery flow (->recovering flag is now
atomic and tested in single location only).
- dropped platform prefixes for basically all i2s board descriptors
- 'ssp_test' renamed to 'i2s_test' to match naming convention of other
boards
- simplified PM implementation for current series, 'low_power' bits
moved to future series
- replaced SND_INTEL_DSP_DRIVER_SST with _AVS as suggested by Mark.
Required changes to intel-dspcfg will be added in future series
- number of typos across commit messages addressed
[1]: https://lore.kernel.org/all/20220311153544.136854-1-cezary.rojewski@intel.com/
[2]: https://lore.kernel.org/all/20220331135246.993089-1-cezary.rojewski@intel.com/
Cezary Rojewski (14):
ASoC: Intel: avs: Account for libraries when booting basefw
ASoC: Intel: avs: Generic soc component driver
ASoC: Intel: avs: Generic PCM FE operations
ASoC: Intel: avs: non-HDA PCM BE operations
ASoC: Intel: avs: HDA PCM BE operations
ASoC: Intel: avs: Coredump and recovery flow
ASoC: Intel: avs: Prepare for firmware tracing
ASoC: Intel: avs: D0ix power state support
ASoC: Intel: avs: Event tracing
ASoC: Intel: avs: Machine board registration
ASoC: Intel: avs: PCI driver implementation
ASoC: Intel: avs: Power management
ASoC: Intel: avs: SKL-based platforms support
ASoC: Intel: avs: APL-based platforms support
Piotr Maziarz (1):
ASoC: Intel: avs: Replace link_mask usage with i2s_link_mask
include/sound/intel-dsp-config.h | 3 +-
include/sound/soc-acpi.h | 2 +
sound/soc/intel/Kconfig | 2 +
sound/soc/intel/avs/Makefile | 7 +-
sound/soc/intel/avs/apl.c | 250 ++++++
sound/soc/intel/avs/avs.h | 79 ++
sound/soc/intel/avs/board_selection.c | 501 +++++++++++
sound/soc/intel/avs/core.c | 631 +++++++++++++
sound/soc/intel/avs/dsp.c | 27 +-
sound/soc/intel/avs/ipc.c | 253 +++++-
sound/soc/intel/avs/loader.c | 84 ++
sound/soc/intel/avs/messages.c | 35 +-
sound/soc/intel/avs/messages.h | 51 ++
sound/soc/intel/avs/pcm.c | 1182 +++++++++++++++++++++++++
sound/soc/intel/avs/registers.h | 8 +
sound/soc/intel/avs/skl.c | 125 +++
sound/soc/intel/avs/topology.c | 14 +-
sound/soc/intel/avs/trace.c | 33 +
sound/soc/intel/avs/trace.h | 154 ++++
sound/soc/intel/avs/utils.c | 23 +
20 files changed, 3443 insertions(+), 21 deletions(-)
create mode 100644 sound/soc/intel/avs/apl.c
create mode 100644 sound/soc/intel/avs/board_selection.c
create mode 100644 sound/soc/intel/avs/pcm.c
create mode 100644 sound/soc/intel/avs/skl.c
create mode 100644 sound/soc/intel/avs/trace.c
create mode 100644 sound/soc/intel/avs/trace.h
--
2.25.1
clk_put() already checks the clk ptr using !clk and IS_ERR()
so there is no need to check it again before calling it.
Signed-off-by: Yihao Han <hanyihao@vivo.com>
Link: https://lore.kernel.org/r/20220517033050.5191-1-hanyihao@vivo.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If user space provides smaller buffer than the IPC4 reply then it is
possible that we corrupt user space memory since the IPC4 dfs_read function
is not using the count directly in copy_to_user() due to the nature of
an IPC4 message.
Cap the remaining counter to make sure that we are not writing too much to
the user space provided buffer.
Add a check also to make sure that the buffer is at least the size of the
IPC4 header.
Fixes: 066c67624d: "ASoC: SOF: ipc-msg-injector: Add support for IPC4 messages"
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220516092442.17027-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Define handlers specific to cAVS 1.5+ platforms, that is, APL and
similar platforms. These differ from SKL-alike ones in terms of AudioDSP
firmware generation and thus the '+' suffix. Introduciton of IMR,
removal of CLDMA, D0IX support and monolithic-ation of library/module
code are most impactful but are not the only changes brought with this
newer generation. Some generic and 1.5 operations are being re-used to
reduce code size.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220516101116.190192-16-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Define handlers specific to cAVS 1.5 platforms, that is SKL, KBL, AML
and all other variants based on this very version of AudioDSP
architecture. Most are specific to SKL-alike platforms with only
skl_log_buffer_offset() being exposed and used later by younger
equivalents.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220516101116.190192-15-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To preserve power during sleep operations, handle suspend (S3),
hibernation (S4) and runtime (RTD3) transitions. As flow for all of
is shared, define common handlers to reduce code size.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220516101116.190192-14-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
HD-Audio bus is a PCI device. Add all functions necessary to probe such
device along with its removal sequence. Behaviour implemented for all
standard operations is similar to existing solutions: sound/pci/hda and
sound/soc/intel/skylake.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220516101116.190192-13-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
AVS driver operates with granular audio card division in mind.
Super-card approach (e.g.: I2S, DMIC and HDA DAIs combined) is
deprecated in favour of individual cards - one per each device. This
provides necessary dynamism, especially for configurations with number
of codecs present and makes it easier to survive auxiliary devices
failures - one card failing to probe does not prevent others from
succeeding.
All boards spawned by AVS are unregistered on ->remove(). This includes
dummy codecs such as DMIC.
As all machine boards found in sound/soc/intel/boards are irreversibly
tied to 'super-card' approach, new boards are going to be introduced.
This temporarily increases number of boards available under /intel
directory until skylake-driver becomes deprecated and removed.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220516101116.190192-12-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
'link_mask' field is intended for SoundWire, I2S should use
'i2s_link_mask' instead.
Signed-off-by: Piotr Maziarz <piotrx.maziarz@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220516101116.190192-11-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Define tracing macros for easy avs debug. These cover all IPC message
types: requests, replies and notifications as well as DSP-core
operations and d0ix toggling.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220516101116.190192-10-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Audio DSP device supports D0 substates in form of D0ix, allowing for
preserving more power even when device is still considered active (D0).
When entered, certain domains which are not being currently used become
power gated. Entering and leaving D0ix is a complex process and differs
between firmware generations.
Conditions that disallow D0i3 and require immediate D0i0 transition
include but may not be limited to: IPC traffic, firmware tracing and
SRAM I/O. To make D0ix toggling sane, delay D0i3 transition and refresh
the timer each time an IPC is requested.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220516101116.190192-9-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Firmware provides its own debug functionality. While coredump is one of
these, traces are the main area of interest. kfifo is enlisted to cache
log data that is being pumped to driver through SRAM. Separate DSP
operations are declared as actual feature implementation differs between
firmware generations.
As log gathering involves usage of IPCs, add all necessary: ENABLE_LOGS
and SYSTEM_TIME.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220516101116.190192-8-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In rare occasions, under stress conditions or hardware malfunction, DSP
firmware may fail. Software is notified about such situation with
EXCEPTION_CAUGHT notification. IPC timeout is also counted as critical
device failure. More often than not, driver can recover from such
situations by performing full reset: killing and restarting ADSP.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220516101116.190192-7-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
HDA streaming in DSP world means enlisting HDAudio links as BE
interfaces. Another difference when compared to its DMIC and I2S friends
is lack of NHLT blob usage - no additional hardware configuration is
needed.
Similarly to I2S component, HDA populates its DAIs dynamically, here by
the means of codec->pcm_list_head. Allows for cutting the number of soc
components required to support the interface.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220516101116.190192-6-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
DMIC and I2S interfaces differ in DMA operations from the HDAudio
interface. With that in mind, implement all DAI operations to handle
non-HDA BE interfaces.
To prevent code duplication in newly added code, I2S platform
registering is dynamic - makes use of specified port_mask and TDMs
array to populate as many DAIs as required.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220516101116.190192-5-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Each stream in AVS is represented by FE and BE domain. FE path stands
for HOST part of the stream while BE stands for LINK (hardware) one.
While BE portion is interface specific, FE is not. Handle all standard
DAI operations to implement FE part of the stream.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220516101116.190192-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Prepare for concrete PCM operations over HDA, DMIC and I2S interfaces by
providing generic soc component implementation. Interface-specific
components re-use this code as majority of flow is shared.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220516101116.190192-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Not all modules are part of base firmware. Some are part of loadable
libraries. These need to be loaded after base firmware reports ready
status through FW_READY notification.
Their loading process is similar to the base firmware's one. Request the
binary file, verify and strip the manifest and load the actual code into
DSP memory with help of CLDMA or HD-Audio render stream, depending on
audio device generation.
List of libraries needed for loading is obtained through the topology -
vendor sections specifying the name of firmware files to request.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220516101116.190192-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Tinghan Shen <tinghan.shen@mediatek.com>:
This patch provides mediatek adsp ipc support for SOF.
ADSP IPC protocol offers (send/recv) interfaces using
mediatek-mailbox APIs.
This patch was tested and confirmed to work with SOF fw on
MT8195 cherry board and MT8186 krabby board.
changes since v8:
- fix patchset 2 and 3.
move "depends on MTK_ADSP_IPC" from SND_SOC_SOF_MTK_COMMON
to SND_SOC_SOF_MT8195/MT8186 to prevent generating wrong
config.
changes since v7:
- rebase to linux-next/next-22020504
- use EXPORT_SYMBOL_GPL instead of EXPORT_SYMBOL in mtk-adsp-ipc.c
- move mtk-adsp-ipc.c out from driver/firmware/mediatek
- add user of mtk-adsp-ipc.h in patchset 2 and 3.
changes since v6:
- rebase to matthias.bgg/linux.git, v5.18-next/soc
- Prefer "GPL" over "GPL v2" for MODULE_LICENSE
changes since v5:
- fix WARNING: modpost: missing MODULE_LICENSE() in drivers/mailbox
/mtk-adsp-mailbox.o. Add MODULE_LICENSE in the last line.
- Due to WARNING: Missing or malformed SPDX-License-Identifier tag
in line 1 in checkpatch, we don't remove SPDX-License in line 1.
changes since v4:
- add error message for wrong mbox chan
changes since v3:
- rebase on v5.16-rc8
- update reviewers
changes since v2:
- add out tag for two memory free phases
changes since v1:
- add comments for mtk_adsp_ipc_send and mtk_adsp_ipc_recv
- remove useless MODULE_LICENSE
- change label name to out_free
Allen-KH Cheng (1):
ASoC: SOF: mediatek: Add ipc support for mt8195
TingHan Shen (1):
firmware: mediatek: add adsp ipc protocol interface
Tinghan Shen (1):
ASoC: SOF: mediatek: Add mt8186 ipc support
drivers/firmware/Kconfig | 9 +
drivers/firmware/Makefile | 1 +
drivers/firmware/mtk-adsp-ipc.c | 157 ++++++++++++++++++
.../linux/firmware/mediatek/mtk-adsp-ipc.h | 65 ++++++++
sound/soc/sof/mediatek/Kconfig | 2 +
sound/soc/sof/mediatek/adsp_helper.h | 12 +-
sound/soc/sof/mediatek/mt8186/mt8186-loader.c | 5 +
sound/soc/sof/mediatek/mt8186/mt8186.c | 141 ++++++++++++++++
sound/soc/sof/mediatek/mt8195/mt8195.c | 138 ++++++++++++++-
9 files changed, 519 insertions(+), 11 deletions(-)
create mode 100644 drivers/firmware/mtk-adsp-ipc.c
create mode 100644 include/linux/firmware/mediatek/mtk-adsp-ipc.h
--
2.18.0
There is a logic error when removing rt5645 device as the function
rt5645_i2c_remove() first cancel the &rt5645->jack_detect_work and
delete the &rt5645->btn_check_timer latter. However, since the timer
handler rt5645_btn_check_callback() will re-queue the jack_detect_work,
this cleanup order is buggy.
That is, once the del_timer_sync in rt5645_i2c_remove is concurrently
run with the rt5645_btn_check_callback, the canceled jack_detect_work
will be rescheduled again, leading to possible use-after-free.
This patch fix the issue by placing the del_timer_sync function before
the cancel_delayed_work_sync.
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Link: https://lore.kernel.org/r/20220516092035.28283-1-linma@zju.edu.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently the checking for if a component sits on the CPU or CODEC side
of the DAI link is done with a helper function that checks if the
component defines legacy_dai_naming. However, there are already a couple
of CPU side components that explicitly opt in to non-legacy DAI naming
and it doesn't seem like a very robust solution. Rather than looking for
the flag check if the component is attached to any of the CODEC DAIs on
the DAI link. This is more robust and helps to bring the core further in
the direction of a component being a generic block rather than being
classified as platform or CODEC drivers.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220513090532.1450944-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Passing the result of the helper function snd_soc_component_is_codec
to snd_soc_register_dai is less clear than just passing the DAI
naming flag directly. snd_soc_register_dai wants to know if it
should use the legacy DAI naming. The CODEC distinction is more
of a historical thing and not obviously directly related, and there
are already a couple of CPU side components that explicitly opt in
to non-legacy DAI naming.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220513090532.1450944-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
of_parse_phandle() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not needed anymore.
Add missing of_node_put() to avoid refcount leak.
Fixes: 6748d05590 ("ASoC: ti: Add custom machine driver for j721e EVM (CPB and IVI)")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220512111331.44774-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
mt8186 DSP uses two hardware mailbox IP to communicate with AP.
One mailbox is used for requests coming from AP, and the other
one is for requests from DSP.
Signed-off-by: Allen-KH Cheng <Allen-KH.Cheng@mediatek.com>
Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com>
Link: https://lore.kernel.org/r/20220512082215.3018-4-tinghan.shen@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds mt8195 IPC support by using mailbox.
On mt8195 resource, there are two mboxes used to handle ipc request
and reply. We create a mtk-adsp-ipc client device to request mbox
controllers.
Signed-off-by: Allen-KH Cheng <Allen-KH.Cheng@mediatek.com>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20220512082215.3018-3-tinghan.shen@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add i.MX8ULP specific soc data, the max register is FSL_SAI_RTCAP
the IP version is also 0x0301, So version can't be used for the
condition of register FSL_SAI_MCTL setting.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/1652688372-10274-4-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On i.MX8MM the max register is FSL_SAI_MCTL, which is
different with previous platform, so add max_register in
soc data to distinguish platforms.
And add specific soc data for i.MX8MM
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/1652688372-10274-2-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When a clock source is connected to multiple nodes / endpoints, the
current USB-audio driver tries to set up at each time one of them is
configured. Although it reads the current rate and updates only if it
differs, some devices seem unhappy with this behavior and spew the
errors when reading/updating the rate unnecessarily.
This patch tries to reduce the redundant clock setup by introducing a
refcount for each clock source. When the stream is actually running,
a clock rate is "locked", and it bypasses the clock and/or refuse to
change any longer.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215934
Link: https://lore.kernel.org/r/20220516104807.16482-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
At cleaning up and moving the device rename from the quirk table to
its own table, we removed the entry for Rane SL-1 as we thought it's
only for renaming. It turned out, however, that the quirk is required
for matching with the device that declares itself as no standard
audio but only as vendor-specific.
Restore the quirk entry for Rane SL-1 to fix the regression.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215887
Fixes: 5436f59bc5 ("ALSA: usb-audio: Move device rename and profile quirks to an internal table")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220516103112.12950-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This will be used to identify ALSA controls and firmware.
The Amp Name will be a channel identifier (L or R), and an
index, which identifies which amp for that channel.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220509214703.4482-10-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This can then be used by HDA code to configure cs_dsp.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220509214703.4482-9-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This sequence is required to setup firmware, and will
be needed for hda driver.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220509214703.4482-8-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This function is used to control the DSP Firmware for cs35l41,
and will be needed by the cs35l41 hda driver, when firmware
support is added.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220509214703.4482-7-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
CLSA0100 Laptop does not contain configuration inside ACPI,
instead the hardware configuration needs to be hardcoded.
Hardcode GPIO2 Interrupt in the driver for CSLA0100.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220509214703.4482-6-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The CS35L41 can produce interrupts on error.
When the interrupts occur, the driver will report
the error, but errors will only be fixed after playback
finishes.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220509214703.4482-5-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This API was required for CLSA0100 laptop, which did not
have correct properties inside ACPI. The required values
are now hardcoded inside the driver so this is no longer
needed.
Without this api, there CLSA0100 can now use the generic
cs35l41 fixup, like the other laptops.
All other laptops will read the Speaker Position from
ACPI and set the channel map from within the driver.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220509214703.4482-4-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This laptop does not contain required properties inside ACPI,
instead the values are be hardcoded inside the driver.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220509214703.4482-3-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For consistency, rename spi cs35l41 hda driver name so that
it matches i2c.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220509214703.4482-2-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The HP EliteBook 630 is using ALC236 codec which used 0x02 to control mute LED
and 0x01 to control micmute LED. Therefore, add a quirk to make it works.
Signed-off-by: Andy Chi <andy.chi@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220513121648.28584-1-andy.chi@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
After a build regression report, I took a look at possible users of
CONFIG_ISA_DMA_API on m68k and found none, which Greg confirmed. The
CONFIG_GENERIC_ISA_DMA option in turn is only needed to implement
ISA_DMA_API, and is clearly not used on the platforms with ISA support.
The CONFIG_ISA support for AMIGA_PCMCIA is probably also unneeded,
but this is less clear. Unlike other PCMCIA implementations, this one
does not use the drivers/pcmcia subsystem at all and just supports
the "apne" network driver. When it was first added, one could use
ISA drivers on it as well, but this probably broke at some point.
With no reason to keep this, let's just drop the corresponding files
and prevent the remaining ISA drivers that use this from getting built.
The remaining definitions in asm/dma.h are used for PCI support.
Link: https://lore.kernel.org/lkml/9e5ee1c3-ca80-f343-a1f5-66f3dd1c0727@linux-m68k.org/
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC
Acked-by: Greg Ungerer <gerg@linux-m68k.org>
Acked-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
Merge series from Ranjani Sridharan <ranjani.sridharan@linux.intel.com>:
The patches in this series add support for FW loading for IPC4 in the SOF
driver.
sound/soc/codecs/max98396.c: In function ‘max98396_i2c_probe’:
sound/soc/codecs/max98396.c:1555:25: error: implicit declaration of function ‘devm_gpiod_get_optional’; did you mean ‘devm_regulator_get_optional’? [-Werror=implicit-function-declaration]
max98396->reset_gpio = devm_gpiod_get_optional(&i2c->dev,
^~~~~~~~~~~~~~~~~~~~~~~
devm_regulator_get_optional
sound/soc/codecs/max98396.c:1556:23: error: ‘GPIOD_OUT_HIGH’ undeclared (first use in this function); did you mean ‘GPIOF_INIT_HIGH’?
"reset", GPIOD_OUT_HIGH);
^~~~~~~~~~~~~~
GPIOF_INIT_HIGH
sound/soc/codecs/max98396.c:1556:23: note: each undeclared identifier is reported only once for each function it appears in
sound/soc/codecs/max98396.c:1565:3: error: implicit declaration of function ‘gpiod_set_value_cansleep’; did you mean ‘gpio_set_value_cansleep’? [-Werror=implicit-function-declaration]
gpiod_set_value_cansleep(max98396->reset_gpio, 0);
^~~~~~~~~~~~~~~~~~~~~~~~
gpio_set_value_cansleep
cc1: all warnings being treated as errors
Include header file <linux/gpio/consumer.h>
Fixes: b585811367 ("ASoC: max98396: add amplifier driver")
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Link: https://lore.kernel.org/r/20220512074640.75550-2-tanghui20@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
of_parse_phandle() returns a node pointer with refcount
incremented, we should use of_node_put() on it when done.
If extcon_find_edev_by_node() fails, it doesn't call of_node_put()
Calling of_node_put() after extcon_find_edev_by_node() to fix this.
Fixes: 7a3a7671fa ("ASoC: samsung: Add driver for Aries boards")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220512043828.496-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Allocate the sof_ipc4_fw_data struct for IPC4 and set the fw header offset
for the platforms which will be used by the core when loading the firmware
image.
The core expects that the "private" field in struct snd_sof_dev (which is
unused today with IPC3) is used to save this data.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220511171648.1622993-6-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Define and add the FW loader ops for IPC4. Also, introduce a new
structure, struct sof_ipc4_private_data that will be used to define some
IPC4-sepcific data.
Co-developed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Rander Wang <rander.wang@intel.com>
Co-developed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Co-developed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220511171648.1622993-5-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a struct sof_ipc4_fw_data to hold the firmware module data and
manifest FW header offset.
The FW reports data about the modules supported by the base FW in its
manifest and the FW header offset is platform dependent information.
This structure will be allocated when the ops are initialized for each
platform and populated when the FW is loaded.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220511171648.1622993-3-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add implementation of low level, platform dependent IPC4 message handling
and set the DSP ops for IPC4 for APL, CNL and TGL platforms.
Co-developed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220511171648.1622993-2-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Zheyu Ma <zheyuma97@gmail.com>:
These drivers mishandle the regulator resource in the probe function,
failing to disable the regulator for probing failure.
Generic serial MIDI driver adding support for using serial devices
compatible with the serial bus as raw MIDI devices, allowing using
additional serial devices not compatible with the existing
serial-u16550 driver. Supports only setting standard serial baudrates on
the underlying serial device; however, the underlying serial device can
be configured so that a requested 38.4 kBaud is actually the standard MIDI
31.25 kBaud. Supports DeviceTree configuration.
Signed-off-by: Daniel Kaehn <kaehndan@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220509145933.1161526-3-kaehndan@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add support for a Speaker Playback Switch, which disables
the Amp connected to cs8409. The Switch is not added
automatically because cs8409 does not have an output amp
for the speaker NID.
Note: This switch uses a different GPIO to Cyborg/Odin variants
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220511100207.1268321-4-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add support for a Speaker Playback Switch, which disables
the Amp connected to cs8409. The Switch is not added
automatically because cs8409 does not have an output amp
for the speaker NID.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220511100207.1268321-3-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The endianness flag is used on the CODEC side to specify an
ambivalence to endian, typically because it is lost over the hardware
link. This device has no DAI links and as such the flag would have
no effect, remove the redundant flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220510153843.1029540-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The endianness flag is used on the CODEC side to specify an
ambivalence to endian, typically because it is lost over the hardware
link. This device has no DAI links and as such the flag would have
no effect, remove the redundant flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220510153843.1029540-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
of_parse_phandle() returns a node pointer with refcount
incremented, we should use of_node_put() on it when done.
Fixes: 08641c7c74 ("ASoC: mxs: add device tree support for mxs-saif")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220511133725.39039-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver should goto label 'err_enable' when failing at regmap_read().
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220511015514.1777923-1-zheyuma97@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
