The existing logging macros are fairly large and converting the
macros to functions make the object code smaller.
Use %pV and __builtin_return_address(0) as appropriate.
$ size fs/ubifs/built-in.o*
text data bss dec hex filename
575831 309688 161312 1046831 ff92f fs/ubifs/built-in.o.allyesconfig.new
622457 312872 161120 1096449 10bb01 fs/ubifs/built-in.o.allyesconfig.old
223785 640 644 225069 36f2d fs/ubifs/built-in.o.defconfig.new
251873 640 644 253157 3dce5 fs/ubifs/built-in.o.defconfig.old
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
When cgroup writeback is in use, there can be multiple wb's
(bdi_writeback's) per bdi and an inode may switch among them
dynamically. In a couple places, the wrong wb was used leading to
performing operations on the wrong list under the wrong lock
corrupting the io lists.
* writeback_single_inode() was taking @wb parameter and used it to
remove the inode from io lists if it becomes clean after writeback.
The callers of this function were always passing in the root wb
regardless of the actual wb that the inode was associated with,
which could also change while writeback is in progress.
Fix it by dropping the @wb parameter and using
inode_to_wb_and_lock_list() to determine and lock the associated wb.
* After writeback_sb_inodes() writes out an inode, it re-locks @wb and
inode to remove it from or move it to the right io list. It assumes
that the inode is still associated with @wb; however, the inode may
have switched to another wb while writeback was in progress.
Fix it by using inode_to_wb_and_lock_list() to determine and lock
the associated wb after writeback is complete. As the function
requires the original @wb->list_lock locked for the next iteration,
in the unlikely case where the inode has changed association, switch
the locks.
Kudos to Tahsin for pinpointing these subtle breakages.
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: d10c809552 ("writeback: implement foreign cgroup inode bdi_writeback switching")
Link: http://lkml.kernel.org/g/CAAeU0aMYeM_39Y2+PaRvyB1nqAPYZSNngJ1eBRmrxn7gKAt2Mg@mail.gmail.com
Reported-and-diagnosed-by: Tahsin Erdogan <tahsin@google.com>
Tested-by: Tahsin Erdogan <tahsin@google.com>
Cc: stable@vger.kernel.org # v4.2+
Signed-off-by: Jens Axboe <axboe@fb.com>
locked_inode_to_wb_and_lock_list() wb_get()'s the wb associated with
the target inode, unlocks inode, locks the wb's list_lock and verifies
that the inode is still associated with the wb. To prevent the wb
going away between dropping inode lock and acquiring list_lock, the wb
is pinned while inode lock is held. The wb reference is put right
after acquiring list_lock citing that the wb won't be dereferenced
anymore.
This isn't true. If the inode is still associated with the wb, the
inode has reference and it's safe to return the wb; however, if inode
has been switched, the wb still needs to be unlocked which is a
dereference and can lead to use-after-free if it it races with wb
destruction.
Fix it by putting the reference after releasing list_lock.
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 87e1d789bf ("writeback: implement [locked_]inode_to_wb_and_lock_list()")
Cc: stable@vger.kernel.org # v4.2+
Tested-by: Tahsin Erdogan <tahsin@google.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Pull vfs updates from Al Viro:
- Preparations of parallel lookups (the remaining main obstacle is the
need to move security_d_instantiate(); once that becomes safe, the
rest will be a matter of rather short series local to fs/*.c
- preadv2/pwritev2 series from Christoph
- assorted fixes
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (32 commits)
splice: handle zero nr_pages in splice_to_pipe()
vfs: show_vfsstat: do not ignore errors from show_devname method
dcache.c: new helper: __d_add()
don't bother with __d_instantiate(dentry, NULL)
untangle fsnotify_d_instantiate() a bit
uninline d_add()
replace d_add_unique() with saner primitive
quota: use lookup_one_len_unlocked()
cifs_get_root(): use lookup_one_len_unlocked()
nfs_lookup: don't bother with d_instantiate(dentry, NULL)
kill dentry_unhash()
ceph_fill_trace(): don't bother with d_instantiate(dn, NULL)
autofs4: don't bother with d_instantiate(dentry, NULL) in ->lookup()
configfs: move d_rehash() into configfs_create() for regular files
ceph: don't bother with d_rehash() in splice_dentry()
namei: teach lookup_slow() to skip revalidate
namei: massage lookup_slow() to be usable by lookup_one_len_unlocked()
lookup_one_len_unlocked(): use lookup_dcache()
namei: simplify invalidation logics in lookup_dcache()
namei: change calling conventions for lookup_{fast,slow} and follow_managed()
...
Merge second patch-bomb from Andrew Morton:
- a couple of hotfixes
- the rest of MM
- a new timer slack control in procfs
- a couple of procfs fixes
- a few misc things
- some printk tweaks
- lib/ updates, notably to radix-tree.
- add my and Nick Piggin's old userspace radix-tree test harness to
tools/testing/radix-tree/. Matthew said it was a godsend during the
radix-tree work he did.
- a few code-size improvements, switching to __always_inline where gcc
screwed up.
- partially implement character sets in sscanf
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (118 commits)
sscanf: implement basic character sets
lib/bug.c: use common WARN helper
param: convert some "on"/"off" users to strtobool
lib: add "on"/"off" support to kstrtobool
lib: update single-char callers of strtobool()
lib: move strtobool() to kstrtobool()
include/linux/unaligned: force inlining of byteswap operations
include/uapi/linux/byteorder, swab: force inlining of some byteswap operations
include/asm-generic/atomic-long.h: force inlining of some atomic_long operations
usb: common: convert to use match_string() helper
ide: hpt366: convert to use match_string() helper
ata: hpt366: convert to use match_string() helper
power: ab8500: convert to use match_string() helper
power: charger_manager: convert to use match_string() helper
drm/edid: convert to use match_string() helper
pinctrl: convert to use match_string() helper
device property: convert to use match_string() helper
lib/string: introduce match_string() helper
radix-tree tests: add test for radix_tree_iter_next
radix-tree tests: add regression3 test
...
Pull core block updates from Jens Axboe:
"Here are the core block changes for this merge window. Not a lot of
exciting stuff going on in this round, most of the changes have been
on the driver side of things. That pull request is coming next. This
pull request contains:
- A set of fixes for chained bio handling from Christoph.
- A tag bounds check for blk-mq from Hannes, ensuring that we don't
do something stupid if a device reports an invalid tag value.
- A set of fixes/updates for the CFQ IO scheduler from Jan Kara.
- A set of blk-mq fixes from Keith, adding support for dynamic
hardware queues, and fixing init of max_dev_sectors for stacking
devices.
- A fix for the dynamic hw context from Ming.
- Enabling of cgroup writeback support on a block device, from
Shaohua"
* 'for-4.6/core' of git://git.kernel.dk/linux-block:
blk-mq: add bounds check on tag-to-rq conversion
block: bio_remaining_done() isn't unlikely
block: cleanup bio_endio
block: factor out chained bio completion
block: don't unecessarily clobber bi_error for chained bios
block-dev: enable writeback cgroup support
blk-mq: Fix NULL pointer updating nr_requests
blk-mq: mark request queue as mq asap
block: Initialize max_dev_sectors to 0
blk-mq: dynamic h/w context count
cfq-iosched: Allow parent cgroup to preempt its child
cfq-iosched: Allow sync noidle workloads to preempt each other
cfq-iosched: Reorder checks in cfq_should_preempt()
cfq-iosched: Don't group_idle if cfqq has big thinktime
Running the following command:
busybox cat /sys/kernel/debug/tracing/trace_pipe > /dev/null
with any tracing enabled pretty very quickly leads to various NULL
pointer dereferences and VM BUG_ON()s, such as these:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000020
IP: [<ffffffff8119df6c>] generic_pipe_buf_release+0xc/0x40
Call Trace:
[<ffffffff811c48a3>] splice_direct_to_actor+0x143/0x1e0
[<ffffffff811c42e0>] ? generic_pipe_buf_nosteal+0x10/0x10
[<ffffffff811c49cf>] do_splice_direct+0x8f/0xb0
[<ffffffff81196869>] do_sendfile+0x199/0x380
[<ffffffff81197600>] SyS_sendfile64+0x90/0xa0
[<ffffffff8192cbee>] entry_SYSCALL_64_fastpath+0x12/0x6d
page dumped because: VM_BUG_ON_PAGE(atomic_read(&page->_count) == 0)
kernel BUG at include/linux/mm.h:367!
invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
RIP: [<ffffffff8119df9c>] generic_pipe_buf_release+0x3c/0x40
Call Trace:
[<ffffffff811c48a3>] splice_direct_to_actor+0x143/0x1e0
[<ffffffff811c42e0>] ? generic_pipe_buf_nosteal+0x10/0x10
[<ffffffff811c49cf>] do_splice_direct+0x8f/0xb0
[<ffffffff81196869>] do_sendfile+0x199/0x380
[<ffffffff81197600>] SyS_sendfile64+0x90/0xa0
[<ffffffff8192cd1e>] tracesys_phase2+0x84/0x89
(busybox's cat uses sendfile(2), unlike the coreutils version)
This is because tracing_splice_read_pipe() can call splice_to_pipe()
with spd->nr_pages == 0. spd_pages underflows in splice_to_pipe() and
we fill the page pointers and the other fields of the pipe_buffers with
garbage.
All other callers of splice_to_pipe() avoid calling it when nr_pages ==
0, and we could make tracing_splice_read_pipe() do that too, but it
seems reasonable to have splice_to_page() handle this condition
gracefully.
Cc: stable@vger.kernel.org
Signed-off-by: Rabin Vincent <rabin@rab.in>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This is a simple extension to the block layout driver to use SCSI
persistent reservations for access control and fencing, as well as
SCSI VPD pages for device identification.
For this we need to pass the nfs4_client to the proc_getdeviceinfo method
to generate the reservation key, and add a new fence_client method
to allow for fence actions in the layout driver.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Trivial reorganization, no change in behavior. Move some code around,
pull some code out of block layoutcommit that will be useful for the
scsi layout.
[bfields@redhat.com: split off from "nfsd: add SCSI layout support"]
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Split the config symbols into a generic pNFS one, which is invisible
and gets selected by the layout drivers, and one for the block layout
driver.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This is a trivial extension to the block layout driver to support the
new SCSI layouts draft. There are three changes:
- device identifcation through the SCSI VPD page. This allows us to
directly use the udev generated persistent device names instead of
requiring an expensive lookup by crawling every block device node
in /dev and reading a signature for it.
- use of SCSI persistent reservations to protect device access and
allow for robust fencing. On the client sides this just means
registering and unregistering a server supplied key.
- an optimized LAYOUTCOMMIT payload that doesn't send unessecary
fields to the server.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
If many threads calls fsync with data writes, we don't need to flush every
bios having node page writes.
The f2fs_wait_on_page_writeback will flush its bios when the page is really
needed.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The f2fs_setxattr() prototype for CONFIG_F2FS_FS_XATTR=n has
been wrong for a long time, since 8ae8f1627f ("f2fs: support
xattr security labels"), but there have never been any callers,
so it did not matter.
Now, the function gets called from f2fs_ioc_keyctl(), which
causes a build failure:
fs/f2fs/file.c: In function 'f2fs_ioc_keyctl':
include/linux/stddef.h:7:14: error: passing argument 6 of 'f2fs_setxattr' makes integer from pointer without a cast [-Werror=int-conversion]
#define NULL ((void *)0)
^
fs/f2fs/file.c:1599:27: note: in expansion of macro 'NULL'
value, F2FS_KEY_SIZE, NULL, type);
^
In file included from ../fs/f2fs/file.c:29:0:
fs/f2fs/xattr.h:129:19: note: expected 'int' but argument is of type 'void *'
static inline int f2fs_setxattr(struct inode *inode, int index,
^
fs/f2fs/file.c:1597:9: error: too many arguments to function 'f2fs_setxattr'
return f2fs_setxattr(inode, F2FS_XATTR_INDEX_KEY,
^
In file included from ../fs/f2fs/file.c:29:0:
fs/f2fs/xattr.h:129:19: note: declared here
static inline int f2fs_setxattr(struct inode *inode, int index,
Thsi changes the prototype of the empty stub function to match
that of the actual implementation. This will not make the key
management work when F2FS_FS_XATTR is disabled, but it gets it
to build at least.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
During ->lookup, I_NEW state of inode was been cleared in f2fs_iget,
so in error path, we don't need to clear it again.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Just clean up opened code with existing function, no logic change.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The crc function is done bit by bit.
Optimize this by use cryptoapi
crc32 function which is backed by h/w acceleration.
Signed-off-by: Keith Mok <ek9852@gmail.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
ra_node_page() is used to read ahead one node page. Comparing to regular
read, it's faster because it doesn't wait for IO completion.
But if it is called twice for reading the same block, and the IO request
from the first call hasn't been completed before the second call, the second
call will have to wait until the read is over.
Here use the code in __do_page_cache_readahead() to solve this problem.
It does nothing when someone else already puts the page in mapping. The
status of page should be assured by whoever puts it there.
This implement also prevents alteration of page reference count.
Signed-off-by: Fan li <fanofcode.li@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds the renamed functions moved from the f2fs crypto files.
1. definitions for per-file encryption used by ext4 and f2fs.
2. crypto.c for encrypt/decrypt functions
a. IO preparation:
- fscrypt_get_ctx / fscrypt_release_ctx
b. before IOs:
- fscrypt_encrypt_page
- fscrypt_decrypt_page
- fscrypt_zeroout_range
c. after IOs:
- fscrypt_decrypt_bio_pages
- fscrypt_pullback_bio_page
- fscrypt_restore_control_page
3. policy.c supporting context management.
a. For ioctls:
- fscrypt_process_policy
- fscrypt_get_policy
b. For context permission
- fscrypt_has_permitted_context
- fscrypt_inherit_context
4. keyinfo.c to handle permissions
- fscrypt_get_encryption_info
- fscrypt_free_encryption_info
5. fname.c to support filename encryption
a. general wrapper functions
- fscrypt_fname_disk_to_usr
- fscrypt_fname_usr_to_disk
- fscrypt_setup_filename
- fscrypt_free_filename
b. specific filename handling functions
- fscrypt_fname_alloc_buffer
- fscrypt_fname_free_buffer
6. Makefile and Kconfig
Cc: Al Viro <viro@ftp.linux.org.uk>
Signed-off-by: Michael Halcrow <mhalcrow@google.com>
Signed-off-by: Ildar Muslukhov <ildarm@google.com>
Signed-off-by: Uday Savagaonkar <savagaon@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=vPCf
-----END PGP SIGNATURE-----
Merge tag 'please-pull-pstore' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux
Pull pstore update from Tony Luck:
"Allow ram backend to be configured with addresses above 4GB"
* tag 'please-pull-pstore' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
pstore: Add support for 64 Bit address space
We only have six patches ready for this merge window.
- Arnd Bergmann contributed a patch that fixes an uninitialized variable
warning.
- The second patch avoids a kernel panic due to referencing an iopen
glock that may not be held, in an error path.
- The third patch fixes a rounding error that caused xfs_tests direct IO
write "fsx" tests to fail on GFS2.
- The fourth patch tidies up the code path when glocks are being reused
to recreate a dinode that was recently deleted.
- The fifth reverts an ages-old patch that should no longer be needed, and
which interfered with the transition of dinodes from unlinked to free.
- And lastly, a patch to eliminate a function parameter that's not needed.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJW6qcKAAoJENeLYdPf93o70SwH/0czrFBIWaPbRgyuGLNvye4G
qvfIk2Yky3UKfgUA+ZW+cAWkxeKubc9scMwce0elKxm0e03rNwIX0slIOx8hymj3
19AgMnj3kcCJvRLdkBITNqnd6vTY2quadLN3j8I2cCNbHOV0GelEkP4jWcTHB+2F
AG0ZJOsvvrcD1ClgdIvGdV52qipZApS/kgZjLpJBEyzxq8SpRe9vNqMDsDyoKWgi
yjp0+aJ0IJAWA24fzdT5HE4fb5yGRWehg51l6Z2mbfXAvT+oeKcYrQiq1zhUutHw
dT6SUHbjt+y0EulPClsf3r5zjRjVCCbpj0wkUY3kPB98lgnpAD2QnUP/JDA+CD0=
=xRmX
-----END PGP SIGNATURE-----
Merge tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull GFS2 updates from Bob Peterson:
"We only have six patches ready for this merge window:
- Arnd Bergmann contributed a patch that fixes an uninitialized
variable warning.
- The second patch avoids a kernel panic due to referencing an iopen
glock that may not be held, in an error path.
- The third patch fixes a rounding error that caused xfs_tests direct
IO write "fsx" tests to fail on GFS2.
- The fourth patch tidies up the code path when glocks are being
reused to recreate a dinode that was recently deleted.
- The fifth reverts an ages-old patch that should no longer be
needed, and which interfered with the transition of dinodes from
unlinked to free.
- And lastly, a patch to eliminate a function parameter that's not
needed"
* tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
GFS2: Eliminate parameter non_block on gfs2_inode_lookup
GFS2: Don't filter out I_FREEING inodes anymore
GFS2: Prevent delete work from occurring on glocks used for create
GFS2: Fix direct IO write rounding error
gfs2: avoid uninitialized variable warning
GFS2: Check if iopen is held when deleting inode
Previous changes introduced the use of socket error reporting
for dlm sockets. This set includes two fixes in how the
socket error callbacks are used.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=qvzY
-----END PGP SIGNATURE-----
Merge tag 'dlm-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm
Pull dlm updates from David Teigland:
"Previous changes introduced the use of socket error reporting for dlm
sockets. This set includes two fixes in how the socket error
callbacks are used"
* tag 'dlm-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
DLM: Save and restore socket callbacks properly
DLM: Replace nodeid_to_addr with kernel_getpeername
improvements, plus a lot of clean ups and bug fixes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJW6c9mAAoJEPL5WVaVDYGjWsEIAJkWUvKB3GgGgP82sKDBP2P8
IbWegO1ICMrSY78BqLI7mLCqggH5JClBgYU3O4VFv8Brj1L9mS5X+vflaDE1j9jj
Ik1KZKtZl1opOwO1L3D4l/ipZAiENUp7NehTtpsFousmz6nMZ5vo6x4t3QSwbUIm
YXpxUIxHEhBcW5i3EDkfYG8305V5oj8HsVf6T98OlWGpBO5VGNMAHvA7CQdQe7Rd
chv70rij5V684bJAEoosEFXVAuOUrxcBqbFA3Nlb432YOPj0ISLx76kw0GIjUYtf
yjoSClbRgwxGzh0jm+yaoYjjm83xbsYbHSsBmh3+/QLMbKTLXeCqR/BiqJavmcM=
=bWpz
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"Performance improvements in SEEK_DATA and xattr scalability
improvements, plus a lot of clean ups and bug fixes"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (38 commits)
ext4: clean up error handling in the MMP support
jbd2: do not fail journal because of frozen_buffer allocation failure
ext4: use __GFP_NOFAIL in ext4_free_blocks()
ext4: fix compile error while opening the macro DOUBLE_CHECK
ext4: print ext4 mount option data_err=abort correctly
ext4: fix NULL pointer dereference in ext4_mark_inode_dirty()
ext4: drop unneeded BUFFER_TRACE in ext4_delete_inline_entry()
ext4: fix misspellings in comments.
jbd2: fix FS corruption possibility in jbd2_journal_destroy() on umount path
ext4: more efficient SEEK_DATA implementation
ext4: cleanup handling of bh->b_state in DAX mmap
ext4: return hole from ext4_map_blocks()
ext4: factor out determining of hole size
ext4: fix setting of referenced bit in ext4_es_lookup_extent()
ext4: remove i_ioend_count
ext4: simplify io_end handling for AIO DIO
ext4: move trans handling and completion deferal out of _ext4_get_block
ext4: rename and split get blocks functions
ext4: use i_mutex to serialize unaligned AIO DIO
ext4: pack ioend structure better
...
- A large patch from me to simplify setting up the list of default
groups by actually implementing it as a list instead of an array.
- a small Y2083 prep patch from Deepa Dinamani. Probably doesn't matter
on it's own, but it seems like he is trying to get rid of all CURRENT_TIME
uses in file systems, which is a worthwhile goal.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=9HqT
-----END PGP SIGNATURE-----
Merge tag 'configfs-for-linus' of git://git.infradead.org/users/hch/configfs
Pull configfs updates from Christoph Hellwig:
- A large patch from me to simplify setting up the list of default
groups by actually implementing it as a list instead of an array.
- a small Y2083 prep patch from Deepa Dinamani. Probably doesn't
matter on it's own, but it seems like he is trying to get rid of all
CURRENT_TIME uses in file systems, which is a worthwhile goal.
* tag 'configfs-for-linus' of git://git.infradead.org/users/hch/configfs:
configfs: switch ->default groups to a linked list
configfs: Replace CURRENT_TIME by current_fs_time()
Some callers of strtobool() were passing a pointer to unterminated
strings. In preparation of adding multi-character processing to
kstrtobool(), update the callers to not pass single-character pointers,
and switch to using the new kstrtobool_from_user() helper where
possible.
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Amitkumar Karwar <akarwar@marvell.com>
Cc: Nishant Sarmukadam <nishants@marvell.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Steve French <sfrench@samba.org>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Joe Perches <joe@perches.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Even though this is a 'can't happen' situation, use the new
radix_tree_iter_retry() pattern to eliminate a goto.
[akpm@linux-foundation.org: fix btrfs build]
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Chris Mason <clm@fb.com>
Cc: Josef Bacik <jbacik@fb.com>
Cc: David Sterba <dsterba@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
On i686 PAE enabled machine the contiguous physical area could be large
and it can cause trimming down variables in below calculation in
read_vmcore() and mmap_vmcore():
tsz = min_t(size_t, m->offset + m->size - *fpos, buflen);
That is, the types being used is like below on i686:
m->offset: unsigned long long int
m->size: unsigned long long int
*fpos: loff_t (long long int)
buflen: size_t (unsigned int)
So casting (m->offset + m->size - *fpos) by size_t means truncating a
given value by 4GB.
Suppose (m->offset + m->size - *fpos) being truncated to 0, buflen >0
then we will get tsz = 0. It is of course not an expected result.
Similarly we could also get other truncated values less than buflen.
Then the real size passed down is not correct any more.
If (m->offset + m->size - *fpos) is above 4GB, read_vmcore or
mmap_vmcore use the min_t result with truncated values being compared to
buflen. Then, fpos proceeds with the wrong value so that we reach below
bugs:
1) read_vmcore will refuse to continue so makedumpfile fails.
2) mmap_vmcore will trigger BUG_ON() in remap_pfn_range().
Use unsigned long long in min_t instead so that the variables in are not
truncated.
Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Dave Young <dyoung@redhat.com>
Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Jianyu Zhan <nasa4836@gmail.com>
Cc: Minfei Huang <mhuang@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It is not elegant that prompt shell does not start from new line after
executing "cat /proc/$pid/wchan". Make prompt shell start from new
line.
Signed-off-by: Minfei Huang <mnfhuang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
`proc_timers_operations` is only used when CONFIG_CHECKPOINT_RESTORE is
enabled.
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Acked-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch provides a proc/PID/timerslack_ns interface which exposes a
task's timerslack value in nanoseconds and allows it to be changed.
This allows power/performance management software to set timer slack for
other threads according to its policy for the thread (such as when the
thread is designated foreground vs. background activity)
If the value written is non-zero, slack is set to that value. Otherwise
sets it to the default for the thread.
This interface checks that the calling task has permissions to to use
PTRACE_MODE_ATTACH_FSCREDS on the target task, so that we can ensure
arbitrary apps do not change the timer slack for other apps.
Signed-off-by: John Stultz <john.stultz@linaro.org>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Oren Laadan <orenl@cellrox.com>
Cc: Ruchi Kandoi <kandoiruchi@google.com>
Cc: Rom Lemarchand <romlem@android.com>
Cc: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patchset introduces a /proc/<pid>/timerslack_ns interface which
would allow controlling processes to be able to set the timerslack value
on other processes in order to save power by avoiding wakeups (Something
Android currently does via out-of-tree patches).
The first patch tries to fix the internal timer_slack_ns usage which was
defined as a long, which limits the slack range to ~4 seconds on 32bit
systems. It converts it to a u64, which provides the same basically
unlimited slack (500 years) on both 32bit and 64bit machines.
The second patch introduces the /proc/<pid>/timerslack_ns interface
which allows the full 64bit slack range for a task to be read or set on
both 32bit and 64bit machines.
With these two patches, on a 32bit machine, after setting the slack on
bash to 10 seconds:
$ time sleep 1
real 0m10.747s
user 0m0.001s
sys 0m0.005s
The first patch is a little ugly, since I had to chase the slack delta
arguments through a number of functions converting them to u64s. Let me
know if it makes sense to break that up more or not.
Other than that things are fairly straightforward.
This patch (of 2):
The timer_slack_ns value in the task struct is currently a unsigned
long. This means that on 32bit applications, the maximum slack is just
over 4 seconds. However, on 64bit machines, its much much larger (~500
years).
This disparity could make application development a little (as well as
the default_slack) to a u64. This means both 32bit and 64bit systems
have the same effective internal slack range.
Now the existing ABI via PR_GET_TIMERSLACK and PR_SET_TIMERSLACK specify
the interface as a unsigned long, so we preserve that limitation on
32bit systems, where SET_TIMERSLACK can only set the slack to a unsigned
long value, and GET_TIMERSLACK will return ULONG_MAX if the slack is
actually larger then what can be stored by an unsigned long.
This patch also modifies hrtimer functions which specified the slack
delta as a unsigned long.
Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Oren Laadan <orenl@cellrox.com>
Cc: Ruchi Kandoi <kandoiruchi@google.com>
Cc: Rom Lemarchand <romlem@android.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The success of CMA allocation largely depends on the success of
migration and key factor of it is page reference count. Until now, page
reference is manipulated by direct calling atomic functions so we cannot
follow up who and where manipulate it. Then, it is hard to find actual
reason of CMA allocation failure. CMA allocation should be guaranteed
to succeed so finding offending place is really important.
In this patch, call sites where page reference is manipulated are
converted to introduced wrapper function. This is preparation step to
add tracepoint to each page reference manipulation function. With this
facility, we can easily find reason of CMA allocation failure. There is
no functional change in this patch.
In addition, this patch also converts reference read sites. It will
help a second step that renames page._count to something else and
prevents later attempt to direct access to it (Suggested by Andrew).
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add a new field, VIRTIO_BALLOON_S_AVAIL, to virtio_balloon memory
statistics protocol, corresponding to 'Available' in /proc/meminfo.
It indicates to the hypervisor how big the balloon can be inflated
without pushing the guest system to swap. This metric would be very
useful in VM orchestration software to improve memory management of
different VMs under overcommit.
This patch (of 2):
Factor out calculation of the available memory counter into a separate
exportable function, in order to be able to use it in other parts of the
kernel.
In particular, it appears a relevant metric to report to the hypervisor
via virtio-balloon statistics interface (in a followup patch).
Signed-off-by: Igor Redko <redkoi@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Roman Kagan <rkagan@virtuozzo.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently /proc/kpageflags returns just KPF_COMPOUND_TAIL for slab tail
pages, which is inconvenient when grasping how slab pages are
distributed (userspace always needs to check which kind of tail pages by
itself). This patch sets KPF_SLAB for such pages.
With this patch:
$ grep Slab /proc/meminfo ; tools/vm/page-types -b slab
Slab: 64880 kB
flags page-count MB symbolic-flags long-symbolic-flags
0x0000000000000080 16220 63 _______S__________________________________ slab
total 16220 63
16220 pages equals to 64880 kB, so returned result is consistent with the
global counter.
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reviewed-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently /proc/kpageflags returns nothing for "tail" buddy pages, which
is inconvenient when grasping how free pages are distributed. This
patch sets KPF_BUDDY for such pages.
With this patch:
$ grep MemFree /proc/meminfo ; tools/vm/page-types -b buddy
MemFree: 3134992 kB
flags page-count MB symbolic-flags long-symbolic-flags
0x0000000000000400 779272 3044 __________B_______________________________ buddy
0x0000000000000c00 4385 17 __________BM______________________________ buddy,mmap
total 783657 3061
783657 pages is 3134628 kB (roughly consistent with the global counter,)
so it's OK.
[akpm@linux-foundation.org: update comment, per Naoya]
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reviewed-by: Vladimir Davydov <vdavydov@virtuozzo.com>>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Here is the big char/misc driver update for 4.6-rc1.
The majority of the patches here is hwtracing and some new mic drivers,
but there's a lot of other driver updates as well. Full details in the
shortlog.
All have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlbp9IcACgkQMUfUDdst+ykyJgCeLTC2QNGrh51kiJglkVJ0yD36
q4MAn0NkvSX2+iv5Jq8MaX6UQoRa4Nun
=MNjR
-----END PGP SIGNATURE-----
Merge tag 'char-misc-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc updates from Greg KH:
"Here is the big char/misc driver update for 4.6-rc1.
The majority of the patches here is hwtracing and some new mic
drivers, but there's a lot of other driver updates as well. Full
details in the shortlog.
All have been in linux-next for a while with no reported issues"
* tag 'char-misc-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (238 commits)
goldfish: Fix build error of missing ioremap on UM
nvmem: mediatek: Fix later provider initialization
nvmem: imx-ocotp: Fix return value of imx_ocotp_read
nvmem: Fix dependencies for !HAS_IOMEM archs
char: genrtc: replace blacklist with whitelist
drivers/hwtracing: make coresight-etm-perf.c explicitly non-modular
drivers: char: mem: fix IS_ERROR_VALUE usage
char: xillybus: Fix internal data structure initialization
pch_phub: return -ENODATA if ROM can't be mapped
Drivers: hv: vmbus: Support kexec on ws2012 r2 and above
Drivers: hv: vmbus: Support handling messages on multiple CPUs
Drivers: hv: utils: Remove util transport handler from list if registration fails
Drivers: hv: util: Pass the channel information during the init call
Drivers: hv: vmbus: avoid unneeded compiler optimizations in vmbus_wait_for_unload()
Drivers: hv: vmbus: remove code duplication in message handling
Drivers: hv: vmbus: avoid wait_for_completion() on crash
Drivers: hv: vmbus: don't loose HVMSG_TIMER_EXPIRED messages
misc: at24: replace memory_accessor with nvmem_device_read
eeprom: 93xx46: extend driver to plug into the NVMEM framework
eeprom: at25: extend driver to plug into the NVMEM framework
...
Just a few patches this time around for the 4.6-rc1 merge window.
Largest is a new firmware driver, but there are some other updates to
the driver core in here as well, the shortlog has the details.
All have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlbp9QoACgkQMUfUDdst+ynsOQCghpfAf3CJDr4PWGCKzDJzyQG9
rZYAn2VwKsqHzAxgLXZY5fQIjxSyaLek
=Mcvl
-----END PGP SIGNATURE-----
Merge tag 'driver-core-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Just a few patches this time around for the 4.6-rc1 merge window.
Largest is a new firmware driver, but there are some other updates to
the driver core in here as well, the shortlog has the details.
All have been in linux-next for a while with no reported issues"
* tag 'driver-core-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
Revert "driver-core: platform: probe of-devices only using list of compatibles"
firmware: qemu config needs I/O ports
firmware: qemu_fw_cfg.c: fix typo FW_CFG_DATA_OFF
driver-core: platform: probe of-devices only using list of compatibles
driver-core: platform: fix typo in documentation for multi-driver helper
component: remove impossible condition
drivers: dma-coherent: simplify dma_init_coherent_memory return value
devicetree: update documentation for fw_cfg ARM bindings
firmware: create directory hierarchy for sysfs fw_cfg entries
firmware: introduce sysfs driver for QEMU's fw_cfg device
kobject: export kset_find_obj() for module use
driver core: bus: use to_subsys_private and to_device_private_bus
driver core: bus: use list_for_each_entry*
debugfs: Add stub function for debugfs_create_automount().
kernfs: make kernfs_walk_ns() use kernfs_pr_cont_buf[]
nfsd4_cltrack_grace_start() will allocate the memory for grace_start but
when we returned due to error we missed freeing it.
Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Pull security layer updates from James Morris:
"There are a bunch of fixes to the TPM, IMA, and Keys code, with minor
fixes scattered across the subsystem.
IMA now requires signed policy, and that policy is also now measured
and appraised"
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (67 commits)
X.509: Make algo identifiers text instead of enum
akcipher: Move the RSA DER encoding check to the crypto layer
crypto: Add hash param to pkcs1pad
sign-file: fix build with CMS support disabled
MAINTAINERS: update tpmdd urls
MODSIGN: linux/string.h should be #included to get memcpy()
certs: Fix misaligned data in extra certificate list
X.509: Handle midnight alternative notation in GeneralizedTime
X.509: Support leap seconds
Handle ISO 8601 leap seconds and encodings of midnight in mktime64()
X.509: Fix leap year handling again
PKCS#7: fix unitialized boolean 'want'
firmware: change kernel read fail to dev_dbg()
KEYS: Use the symbol value for list size, updated by scripts/insert-sys-cert
KEYS: Reserve an extra certificate symbol for inserting without recompiling
modsign: hide openssl output in silent builds
tpm_tis: fix build warning with tpm_tis_resume
ima: require signed IMA policy
ima: measure and appraise the IMA policy itself
ima: load policy using path
...
Pull crypto update from Herbert Xu:
"Here is the crypto update for 4.6:
API:
- Convert remaining crypto_hash users to shash or ahash, also convert
blkcipher/ablkcipher users to skcipher.
- Remove crypto_hash interface.
- Remove crypto_pcomp interface.
- Add crypto engine for async cipher drivers.
- Add akcipher documentation.
- Add skcipher documentation.
Algorithms:
- Rename crypto/crc32 to avoid name clash with lib/crc32.
- Fix bug in keywrap where we zero the wrong pointer.
Drivers:
- Support T5/M5, T7/M7 SPARC CPUs in n2 hwrng driver.
- Add PIC32 hwrng driver.
- Support BCM6368 in bcm63xx hwrng driver.
- Pack structs for 32-bit compat users in qat.
- Use crypto engine in omap-aes.
- Add support for sama5d2x SoCs in atmel-sha.
- Make atmel-sha available again.
- Make sahara hashing available again.
- Make ccp hashing available again.
- Make sha1-mb available again.
- Add support for multiple devices in ccp.
- Improve DMA performance in caam.
- Add hashing support to rockchip"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (116 commits)
crypto: qat - remove redundant arbiter configuration
crypto: ux500 - fix checks of error code returned by devm_ioremap_resource()
crypto: atmel - fix checks of error code returned by devm_ioremap_resource()
crypto: qat - Change the definition of icp_qat_uof_regtype
hwrng: exynos - use __maybe_unused to hide pm functions
crypto: ccp - Add abstraction for device-specific calls
crypto: ccp - CCP versioning support
crypto: ccp - Support for multiple CCPs
crypto: ccp - Remove check for x86 family and model
crypto: ccp - memset request context to zero during import
lib/mpi: use "static inline" instead of "extern inline"
lib/mpi: avoid assembler warning
hwrng: bcm63xx - fix non device tree compatibility
crypto: testmgr - allow rfc3686 aes-ctr variants in fips mode.
crypto: qat - The AE id should be less than the maximal AE number
lib/mpi: Endianness fix
crypto: rockchip - add hash support for crypto engine in rk3288
crypto: xts - fix compile errors
crypto: doc - add skcipher API documentation
crypto: doc - update AEAD AD handling
...
eCryptfs: Fix null pointer dereference on kzalloc error path
The conversion to skcipher and shash added a couple of null pointer
dereference bugs on the kzalloc failure path. This patch fixes them.
Fixes: 3095e8e366 ("eCryptfs: Use skcipher and shash")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
These patches include several bugfixes and cleanups for the NFSoRDMA client.
This includes bugfixes for NFS v4.1, proper RDMA_ERROR handling, and fixes
from the recent workqueue swicchover. These patches also switch xprtrdma to
use the new CQ API
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=aHja
-----END PGP SIGNATURE-----
Merge tag 'nfs-rdma-4.6-1' of git://git.linux-nfs.org/projects/anna/nfs-rdma
NFS: NFSoRDMA Client Side Changes
These patches include several bugfixes and cleanups for the NFSoRDMA client.
This includes bugfixes for NFS v4.1, proper RDMA_ERROR handling, and fixes
from the recent workqueue swicchover. These patches also switch xprtrdma to
use the new CQ API
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
* tag 'nfs-rdma-4.6-1' of git://git.linux-nfs.org/projects/anna/nfs-rdma: (787 commits)
xprtrdma: Use new CQ API for RPC-over-RDMA client send CQs
xprtrdma: Use an anonymous union in struct rpcrdma_mw
xprtrdma: Use new CQ API for RPC-over-RDMA client receive CQs
xprtrdma: Serialize credit accounting again
xprtrdma: Properly handle RDMA_ERROR replies
rpcrdma: Add RPCRDMA_HDRLEN_ERR
xprtrdma: Do not wait if ib_post_send() fails
xprtrdma: Segment head and tail XDR buffers on page boundaries
xprtrdma: Clean up dprintk format string containing a newline
xprtrdma: Clean up physical_op_map()
xprtrdma: Clean up unused RPCRDMA_INLINE_PAD_THRESH macro
Just call inode_dio_wait directly instead of through a pointless wrapper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
The only difference to nfs_file_fsync is the call to pnfs_sync_inode. But
pnfs_sync_inode is just an inline that calls a pNFS layout driver method
if CONFIG_PNFS is designed, and thus can be called just fine from the core
NFS module.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Merge first patch-bomb from Andrew Morton:
- some misc things
- ofs2 updates
- about half of MM
- checkpatch updates
- autofs4 update
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (120 commits)
autofs4: fix string.h include in auto_dev-ioctl.h
autofs4: use pr_xxx() macros directly for logging
autofs4: change log print macros to not insert newline
autofs4: make autofs log prints consistent
autofs4: fix some white space errors
autofs4: fix invalid ioctl return in autofs4_root_ioctl_unlocked()
autofs4: fix coding style line length in autofs4_wait()
autofs4: fix coding style problem in autofs4_get_set_timeout()
autofs4: coding style fixes
autofs: show pipe inode in mount options
kallsyms: add support for relative offsets in kallsyms address table
kallsyms: don't overload absolute symbol type for percpu symbols
x86: kallsyms: disable absolute percpu symbols on !SMP
checkpatch: fix another left brace warning
checkpatch: improve UNSPECIFIED_INT test for bare signed/unsigned uses
checkpatch: warn on bare unsigned or signed declarations without int
checkpatch: exclude asm volatile from complex macro check
mm: memcontrol: drop unnecessary lru locking from mem_cgroup_migrate()
mm: migrate: consolidate mem_cgroup_migrate() calls
mm/compaction: speed up pageblock_pfn_to_page() when zone is contiguous
...
Explicitly check show_devname method return code and bail out in case
of an error. This fixes regression introduced by commit 9d4d65748a.
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
nfsd_lookup_dentry exits with the parent filehandle locked. fh_put also
unlocks if necessary (nfsd filehandle locking is probably too lenient),
so it gets unlocked eventually, but if the following op in the compound
needs to lock it again, we can deadlock.
A fuzzer ran into this; normal clients don't send a secinfo followed by
a readdir in the same compound.
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
If a user calls writev/readv in direct io mode with partially valid data
in the iovec array such that any vector other than the first one in the
array contains invalid data, we currently return the error for the invalid
iovec.
Instead, we should return the number of bytes already written/read and not
the error as we do in the non direct_io case.
Reported-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: Ashish Samant <ashish.samant@oracle.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Use the standard pr_xxx() log macros directly for log prints instead of
the AUTOFS_XXX() macros.
Signed-off-by: Ian Kent <ikent@redhat.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Common kernel coding practice is to include the newline of log prints
within the log text rather than hidden away in a macro.
To avoid introducing inconsistencies as changes are made change the log
macros to not include the newline.
Signed-off-by: Ian Kent <raven@themaw.net>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use the pr_*() print in AUTOFS_*() macros instead of printks and include
the module name in log message macros. Also use the AUTOFS_*() macros
everywhere instead of raw printks.
Signed-off-by: Ian Kent <raven@themaw.net>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix some white space format errors.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The return from an ioctl if an invalid ioctl is passed in should be
EINVAL not ENOSYS.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The need for this is questionable but checkpatch.pl complains about the
line length and it's a straightfoward change.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Refactor autofs4_get_set_timeout() to eliminate coding style error.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Try and make the coding style completely consistent throughtout the
autofs module and inline with kernel coding style recommendations.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is required for CRIU (Checkpoint Restart In Userspace) to migrate a
mount point when write end in user space is closed.
Below is a brief description of the problem.
To migrate a non-catatonic autofs mount point, one has to restore the
control pipe between kernel and autofs master process.
One of the autofs masters is systemd, which closes pipe write end after
passing it to the kernel with mount call.
To be able to restore the systemd control pipe one has to know which
read pipe end in systemd corresponds to the write pipe end in the
kernel. The pipe "fd" in mount options is not enough because it was
closed and probably replaced by some other descriptor.
Thus, some other attribute is required to be able to find the read pipe
end. The best attribute to use to find the correct pipe end is inode
number becuase it's unique for the whole system and can't be reused
while the autofs mount exists.
This attribute can also be used to recognize a situation where an autofs
mount has no master (no process with specified "pgrp" or no file
descriptor with "pipe_ino", specified in autofs mount options).
Signed-off-by: Stanislav Kinsburskiy <skinsbursky@virtuozzo.com>
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now that migration doesn't clear page->mem_cgroup of live pages anymore,
it's safe to make lock_page_memcg() and the memcg stat functions take
pages, and spare the callers from memcg objects.
[akpm@linux-foundation.org: fix warnings]
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Suggested-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Cc: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
These patches tag the page cache radix tree eviction entries with the
memcg an evicted page belonged to, thus making per-cgroup LRU reclaim
work properly and be as adaptive to new cache workingsets as global
reclaim already is.
This should have been part of the original thrash detection patch
series, but was deferred due to the complexity of those patches.
This patch (of 5):
So far the only sites that needed to exclude charge migration to
stabilize page->mem_cgroup have been per-cgroup page statistics, hence
the name mem_cgroup_begin_page_stat(). But per-cgroup thrash detection
will add another site that needs to ensure page->mem_cgroup lifetime.
Rename these locking functions to the more generic lock_page_memcg() and
unlock_page_memcg(). Since charge migration is a cgroup1 feature only,
we might be able to delete it at some point, and these now easy to
identify locking sites along with it.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Suggested-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In dlm_send_join_cancels(), node is defined with type unsigned int, but
initialized with -1, this will lead variable overflow. Although this
won't cause any runtime problem, the code looks a little uncoordinated.
Signed-off-by: Jun Piao <piaojun@huawei.com>
Reviewed-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
when o2hb detect a node down, it first set the dead node to recovery map
and create ocfs2rec which will replay journal for dead node. o2hb
thread then call dlm_do_local_recovery_cleanup() to delete the lock for
dead node. After the lock of dead node is gone, locks for other nodes
can be granted and may modify the meta data without replaying journal of
the dead node. The detail is described as follows.
N1 N2 N3(master)
modify the extent tree of
inode, and commit
dirty metadata to journal,
then goes down.
o2hb thread detects
N1 goes down, set
recovery map and
delete the lock of N1.
dlm_thread flush ast
for the lock of N2.
do not detect the death
of N1, so recovery map is
empty.
read inode from disk
without replaying
the journal of N1 and
modify the extent tree
of the inode that N1
had modified.
ocfs2rec recover the
journal of N1.
The modification of N2
is lost.
The modification of N1 and N2 are not serial, and it will lead to
read-only file system. We can set recovery_waiting flag to the lock
resource after delete the lock for dead node to prevent other node from
getting the lock before dlm recovery. After dlm recovery, the recovery
map on N2 is not empty, ocfs2_inode_lock_full_nested() will wait for ocfs2
recovery.
Signed-off-by: Jiufei Xue <xuejiufei@huawei.com>
Reviewed-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If master migrate this lock resource to node when it happened to purge
it, a new lock resource will be created and inserted into hash list. If
then master goes down, the lock resource being purged is recovered, so
there exist two lock resource with different owner. So return error to
master if the lock resource is in DROPPING state, master will retry to
migrate this lock resource.
Signed-off-by: xuejiufei <xuejiufei@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Joseph Qi <joseph.qi@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If the master goes down after return in-progress for deref message. The
lock resource on non-master node can not be purged. Clear the
DROPPING_REF flag and recovery it.
Signed-off-by: xuejiufei <xuejiufei@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Joseph Qi <joseph.qi@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Master returns in-progress to non-master node when it can not clear the
refmap bit right now. And non-master node will not purge the lock
resource until receiving deref done message.
Signed-off-by: xuejiufei <xuejiufei@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Joseph Qi <joseph.qi@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This series of patches is to fix the dis-order issue of setting/clearing
refmap bit described below.
Node 1 Node 2(master)
dlmlock
dlm_do_master_request
dlm_master_request_handler
-> dlm_lockres_set_refmap_bit
dlmlock succeed
dlmunlock succeed
dlm_purge_lockres
dlm_deref_handler
-> find lock resource is in
DLM_LOCK_RES_SETREF_INPROG state,
so dispatch a deref work
dlm_purge_lockres succeed.
call dlmlock again
dlm_do_master_request
dlm_master_request_handler
-> dlm_lockres_set_refmap_bit
deref work trigger, call
dlm_lockres_clear_refmap_bit
to clear Node 1 from refmap
dlm_purge_lockres succeed
dlm_send_remote_lock_request
return DLM_IVLOCKID because
the lockres is not exist
BUG if the lockres is $RECOVERY
This series of patches add a new message to keep the order of set and
clear. Other nodes can purge the lock resource only after the refmap bit
on master is cleared.
This patch is to add DEREF_DONE message and corresponding handler. Node
can purge the lock resource after receiving this message. As a new
message is added, so increase the minor number of dlm protocol version.
Signed-off-by: xuejiufei <xuejiufei@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Joseph Qi <joseph.qi@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Refer to cluster/tcp.h, NET_MAX_PAYLOAD_BYTES is a typo for
O2NET_MAX_PAYLOAD_BYTES.
Since currently DLM_MIG_LOCKRES_RESERVED is not actually used, it won't
cause any problem. But we'd better correct it for further use.
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit a75e9ccabd ("ocfs2: use spinlock irqsave for downconvert lock")
missed an unmodified place in ocfs2_osb_dump(), so it still exists a
deadlock scenario.
ocfs2_wake_downconvert_thread
ocfs2_rw_unlock
ocfs2_dio_end_io
dio_complete
.....
bio_endio
req_bio_endio
....
scsi_io_completion
blk_done_softirq
__do_softirq
do_softirq
irq_exit
do_IRQ
ocfs2_osb_dump
cat /sys/kernel/debug/ocfs2/${uuid}/fs_state
This patch still uses spin_lock_irqsave() - replace spin_lock() to solve
this situation.
Signed-off-by: Yiwen Jiang <jiangyiwen@huawei.com>
Reviewed-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There actually no hardware or software interrupts in the context which
using o2hb_live_lock, so we don't need to worry about race conditions
caused by irq/softirq with spinlock held. Turning off irq is not good
for system performance after all. Just replace them with a non
interrupt safe function.
Signed-off-by: Yiwen Jiang <jiangyiwen@huawei.com>
Reviewed-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull x86 asm updates from Ingo Molnar:
"This is another big update. Main changes are:
- lots of x86 system call (and other traps/exceptions) entry code
enhancements. In particular the complex parts of the 64-bit entry
code have been migrated to C code as well, and a number of dusty
corners have been refreshed. (Andy Lutomirski)
- vDSO special mapping robustification and general cleanups (Andy
Lutomirski)
- cpufeature refactoring, cleanups and speedups (Borislav Petkov)
- lots of other changes ..."
* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (64 commits)
x86/cpufeature: Enable new AVX-512 features
x86/entry/traps: Show unhandled signal for i386 in do_trap()
x86/entry: Call enter_from_user_mode() with IRQs off
x86/entry/32: Change INT80 to be an interrupt gate
x86/entry: Improve system call entry comments
x86/entry: Remove TIF_SINGLESTEP entry work
x86/entry/32: Add and check a stack canary for the SYSENTER stack
x86/entry/32: Simplify and fix up the SYSENTER stack #DB/NMI fixup
x86/entry: Only allocate space for tss_struct::SYSENTER_stack if needed
x86/entry: Vastly simplify SYSENTER TF (single-step) handling
x86/entry/traps: Clear DR6 early in do_debug() and improve the comment
x86/entry/traps: Clear TIF_BLOCKSTEP on all debug exceptions
x86/entry/32: Restore FLAGS on SYSEXIT
x86/entry/32: Filter NT and speed up AC filtering in SYSENTER
x86/entry/compat: In SYSENTER, sink AC clearing below the existing FLAGS test
selftests/x86: In syscall_nt, test NT|TF as well
x86/asm-offsets: Remove PARAVIRT_enabled
x86/entry/32: Introduce and use X86_BUG_ESPFIX instead of paravirt_enabled
uprobes: __create_xol_area() must nullify xol_mapping.fault
x86/cpufeature: Create a new synthetic cpu capability for machine check recovery
...
Now that we're not filtering out I_FREEING inodes from our lookups
anymore, we can eliminate the non_block parameter from the lookup
function.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
This patch basically reverts a very old patch from 2008,
7a9f53b3c1, with the title
"Alternate gfs2_iget to avoid looking up inodes being freed".
The original patch was designed to avoid a deadlock caused by lock
ordering with try_rgrp_unlink. The patch forced the function to not
find inodes that were being removed by VFS. The problem is, that
made it impossible for nodes to delete their own unlinked dinodes
after a certain point in time, because the inode needed was not found
by this filtering process. There is no longer a need for the patch,
since function try_rgrp_unlink no longer locks the inode: All it does
is queue the glock onto the delete work_queue, so there should be no
more deadlock.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch tries to prevent delete work (queued via iopen callback)
from executing if the glock is currently being used to create
a new inode.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
The fsx test in xfstests was failing because it was using direct IO
writes which were using a bad calculation. It was using
loff_t lstart = offset & (PAGE_CACHE_SIZE - 1); when it should be
loff_t lstart = offset & ~(PAGE_CACHE_SIZE - 1);
Thus, the write at offset 0x67e00 was calculating lstart to be
0xe00, the address of our corruption. Instead, it should have been
0x67000. This patch fixes the calculation.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
We get a bogus warning about a potential uninitialized variable
use in gfs2, because the compiler does not figure out that we
never use the leaf number if get_leaf_nr() returns an error:
fs/gfs2/dir.c: In function 'get_first_leaf':
fs/gfs2/dir.c:802:9: warning: 'leaf_no' may be used uninitialized in this function [-Wmaybe-uninitialized]
fs/gfs2/dir.c: In function 'dir_split_leaf':
fs/gfs2/dir.c:1021:8: warning: 'leaf_no' may be used uninitialized in this function [-Wmaybe-uninitialized]
Changing the 'if (!error)' to 'if (!IS_ERR_VALUE(error))' is
sufficient to let gcc understand that this is exactly the same
condition as in IS_ERR() so it can optimize the code path enough
to understand it.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
xfs_dir2_node_trim_free can return with setting the rvalp argument
pointer. Initialize it to 0 at the beginning of the function and
only update it to 1 if we succeeded trimming a freespace block.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
__xfs_trans_roll() can return without setting the
*committed argument; this was a problem for xfs_bmap_finish():
int committed;/* xact committed or not */
...
error = __xfs_trans_roll(tp, ip, &committed);
if (error) {
...
if (committed) {
and we tested an uninitialized "committed" variable on the
error path. No caller is preserving "committed" state across
calls to __xfs_trans_roll(), so just initialize committed inside
the function to avoid future errors like this.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
xfs_bmap_del_extent() handles extent removal from the in-core and
on-disk extent lists. When removing a delalloc range, it updates the
indirect block reservation appropriately based on the removal. It
currently enforces that the new indirect block reservation is less than
or equal to the original. This is normally the case in all situations
except for in certain cases when the removed range creates a hole in a
single delalloc extent, thus splitting a single delalloc extent in two.
It is possible with small enough extents to split an indlen==1 extent
into two such slightly smaller extents. This leaves one extent with 0
indirect blocks and leads to assert failures in other areas (e.g.,
xfs_bunmapi() if the extent happens to be removed).
Update the indlen distribution code to steal blocks from the deleted
extent, if necessary, to satisfy the worst case total indirect
reservation for the new extents. This is safe as the caller does not
update the fdblocks counters until the extent is removed. Blocks stolen
in this manner simply remain accounted as allocated, having ownership
transferred from the data extent to an indirect reservation.
As a precaution, fall back to the original reservation algorithm if the
new indlen requirement is not met and warn if we end up with extents
without any reservation at all to detect this more easily in the future.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The delayed allocation indirect reservation splitting code is not
sufficient in some cases where a delalloc extent is split in two. In
preparation for enhancements to this code, refactor the current indlen
distribution algorithm into a new helper function.
[dchinner: rename temp, temp2 variables]
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
xfs_bunmapi() currently updates the fdblocks counter, unreserves quota,
etc. before the extent is deleted by xfs_bmap_del_extent(). The function
has problems dividing up the indirect reserved blocks for scenarios
where a single delalloc extent is split in two. Particularly, there
aren't always enough blocks reserved for multiple extents in a single
extent reservation.
The solution to this problem is to allow the extent removal code to
steal from the deleted extent to meet indirect reservation requirements.
Move the block of code in xfs_bmapi() that updates the fdblocks counter
to after the call to xfs_bmap_del_extent() to allow the codepath to
update the extent record before the free blocks are accounted. Also,
reshuffle the code slightly so the delalloc accounting occurs near the
xfs_bmap_del_extent() call to provide context for the comments.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Add a DEBUG mode-only sysfs knob to enable forced buffered write
failure. An additional side effect of this mode is brute force killing
of delayed allocation blocks in the range of the write. The latter is
the prime motiviation behind this patch, as userspace test
infrastructure requires a reliable mechanism to create and split
delalloc extents without causing extent conversion.
Certain fallocate operations (i.e., zero range) were used for this in
the past, but the implementations have changed such that delalloc
extents are flushed and converted to real blocks, rendering the test
useless.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJW5j4RAAoJEHm+PkMAQRiGhVEH/0qZbM1J+WnCK92bm9+inCnB
JO2JViGIuCQB5BxljVMil2dzrw85D+dC7+fryr0wVBhhBlr0lXPJGSYCYYTEaI20
Wco5YlTmjRirUwmxWzBXvB5kvTdIaNfNYDcFch6lbsaLUNgqydNKtk08ckO/4k0D
AmaShW8swBiXE/RmHuj8H41ksHsnY8W62dlczEaAIfr4kluPX/kKnyXpmpvmZm1j
sM4fskPlq+Jz5pOXXFsFfrhiBgpSUnwSj1tNwK5+DkmaVnWOkPuwkqLBWqpy4pzm
GTeDBdf5/ixGxgNsZ2VWtbPnc2wEP7SIcu45MU7QFw5kqwDN2nN63BRVXI5Z5qY=
=RFx2
-----END PGP SIGNATURE-----
Orangefs: merge to v4.5
Merge tag 'v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into current
Linux 4.5
The 'reqs' member of fuse_io_priv serves two purposes. First is to track
the number of oustanding async requests to the server and to signal that
the io request is completed. The second is to be a reference count on the
structure to know when it can be freed.
For sync io requests these purposes can be at odds. fuse_direct_IO() wants
to block until the request is done, and since the signal is sent when
'reqs' reaches 0 it cannot keep a reference to the object. Yet it needs to
use the object after the userspace server has completed processing
requests. This leads to some handshaking and special casing that it
needlessly complicated and responsible for at least one race condition.
It's much cleaner and safer to maintain a separate reference count for the
object lifecycle and to let 'reqs' just be a count of outstanding requests
to the userspace server. Then we can know for sure when it is safe to free
the object without any handshaking or special cases.
The catch here is that most of the time these objects are stack allocated
and should not be freed. Initializing these objects with a single reference
that is never released prevents accidental attempts to free the objects.
Fixes: 9d5722b777 ("fuse: handle synchronous iocbs internally")
Cc: stable@vger.kernel.org # v4.1+
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
There's a race in fuse_direct_IO(), whereby is_sync_kiocb() is called on an
iocb that could have been freed if async io has already completed. The fix
in this case is simple and obvious: cache the result before starting io.
It was discovered by KASan:
kernel: ==================================================================
kernel: BUG: KASan: use after free in fuse_direct_IO+0xb1a/0xcc0 at addr ffff88036c414390
Signed-off-by: Robert Doebbelin <robert@quobyte.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: bcba24ccdc ("fuse: enable asynchronous processing direct IO")
Cc: <stable@vger.kernel.org> # 3.10+
Dont print warning for ENOSPC error unless ENOSPC_DEBUG is enabled. Use
btrfs_debug if it is enabled.
Signed-off-by: Ashish Samant <ashish.samant@oracle.com>
[ preserve the WARN_ON ]
Signed-off-by: David Sterba <dsterba@suse.com>
d_add() with inode->i_lock already held; common to d_add() and
d_splice_alias(). All ->lookup() instances that end up hashing
the dentry they are given will hash it here.
This almost completes the preparations to parallel lookups
proper - the only remaining bit is taking security_d_instantiate()
past d_rehash() and doing rehashing without dropping ->d_lock.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
First of all, don't bother calling it if inode is NULL -
that makes inode argument unused. Moreover, do it *before*
dropping ->d_lock, not right after that (and don't bother
grabbing ->d_lock in it, of course).
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
new primitive: d_exact_alias(dentry, inode). If there is an unhashed
dentry with the same name/parent and given inode, rehash, grab and
return it. Otherwise, return NULL. The only caller of d_add_unique()
switched to d_exact_alias() + d_splice_alias().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
... and use d_add(dn, NULL) in case we need to hash a negative
unhashed rather than using d_rehash() directly.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
... and make mountpoint_last() use it. That makes all
candidates for lookup with parent locked shared go
through lookup_slow().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
No need to lock parent just because of ->d_revalidate() on child;
contrary to the stale comment, lookup_dcache() *can* be used without
locking the parent. Result can be moved as soon as we return, of
course, but the same is true for lookup_one_len_unlocked() itself.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Have lookup_fast() return 1 on success and 0 on "need to fall back";
lookup_slow() and follow_managed() return positive (1) on success.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
There is memory leak as both caller function kmmpd() and callee
read_mmp_block() not releasing bh_check (i.e buffer_head).
Given patch fixes this problem.
[ Additional changes suggested by Andreas Dilger -- TYT ]
Signed-off-by: Jadhav Vikram <vikramjadhavpucsd2007@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Journal transaction might fail prematurely because the frozen_buffer
is allocated by GFP_NOFS request:
[ 72.440013] do_get_write_access: OOM for frozen_buffer
[ 72.440014] EXT4-fs: ext4_reserve_inode_write:4729: aborting transaction: Out of memory in __ext4_journal_get_write_access
[ 72.440015] EXT4-fs error (device sda1) in ext4_reserve_inode_write:4735: Out of memory
(...snipped....)
[ 72.495559] do_get_write_access: OOM for frozen_buffer
[ 72.495560] EXT4-fs: ext4_reserve_inode_write:4729: aborting transaction: Out of memory in __ext4_journal_get_write_access
[ 72.496839] do_get_write_access: OOM for frozen_buffer
[ 72.496841] EXT4-fs: ext4_reserve_inode_write:4729: aborting transaction: Out of memory in __ext4_journal_get_write_access
[ 72.505766] Aborting journal on device sda1-8.
[ 72.505851] EXT4-fs (sda1): Remounting filesystem read-only
This wasn't a problem until "mm: page_alloc: do not lock up GFP_NOFS
allocations upon OOM" because small GPF_NOFS allocations never failed.
This allocation seems essential for the journal and GFP_NOFS is too
restrictive to the memory allocator so let's use __GFP_NOFAIL here to
emulate the previous behavior.
Signed-off-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This might be unexpected but pages allocated for sbi->s_buddy_cache are
charged to current memory cgroup. So, GFP_NOFS allocation could fail if
current task has been killed by OOM or if current memory cgroup has no
free memory left. Block allocator cannot handle such failures here yet.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
the error is:
fs/ext4/mballoc.c:475:43: error: 'struct ext4_group_info' has
no member named 'bb_bitmap'.
so, the definition of macro DOUBLE_CHECK should before
'struct ext4_group_info', I fixed it, and I moved the macro
AGGRESSIVE_CHECK together, because I think they shoule be together.
Signed-off-by: Aihua Zhang <zhangaihua1@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If data_err=abort option is specified for an ext3/ext4 mount,
/proc/mounts does show it as "(null)". This is caused by token2str()
returning NULL for Opt_data_err_abort (due to its pattern containing
'=').
Signed-off-by: Ales Novak <alnovak@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4_reserve_inode_write() in ext4_mark_inode_dirty() could fail on
error (e.g. EIO) and iloc.bh can be NULL in this case. But the error is
ignored in the following "if" condition and ext4_expand_extra_isize()
might be called with NULL iloc.bh set, which triggers NULL pointer
dereference.
This is uncovered by commit 8b4953e13f ("ext4: reserve code points for
the project quota feature"), which enlarges the ext4_inode size, and
run the following script on new kernel but with old mke2fs:
#/bin/bash
mnt=/mnt/ext4
devname=ext4-error
dev=/dev/mapper/$devname
fsimg=/home/fs.img
trap cleanup 0 1 2 3 9 15
cleanup()
{
umount $mnt >/dev/null 2>&1
dmsetup remove $devname
losetup -d $backend_dev
rm -f $fsimg
exit 0
}
rm -f $fsimg
fallocate -l 1g $fsimg
backend_dev=`losetup -f --show $fsimg`
devsize=`blockdev --getsz $backend_dev`
good_tab="0 $devsize linear $backend_dev 0"
error_tab="0 $devsize error $backend_dev 0"
dmsetup create $devname --table "$good_tab"
mkfs -t ext4 $dev
mount -t ext4 -o errors=continue,strictatime $dev $mnt
dmsetup load $devname --table "$error_tab" && dmsetup resume $devname
echo 3 > /proc/sys/vm/drop_caches
ls -l $mnt
exit 0
[ Patch changed to simplify the function a tiny bit. -- Ted ]
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Changes:
o Only perform torn log write detection on dirty logs. This prevents
failures being detected due to a clean filesystem being moved
between machines or kernels of different architectures (e.g. 32
-> 64 bit, BE -> LE, etc). This fixes a regression introduced by
the torn log write detection in 4.5-rc1.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=NDeH
-----END PGP SIGNATURE-----
Merge tag 'xfs-for-linus-4.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs
Pull xfs fixes from Dave Chinner:
"This is a fix for a regression introduced in 4.5-rc1 by the new torn
log write detection code. The regression only affects people moving a
clean filesystem between machines/kernels of different architecture
(such as changing between 32 bit and 64 bit kernels), but this is the
recommended (and only!) safe way to migrate a filesystem between
architectures so we really need to ensure it works.
The changes are larger than I'd prefer right at the end of the release
cycle, but the majority of the change is just factoring code to enable
the detection of a clean log at the correct time to avoid this issue.
Changes:
- Only perform torn log write detection on dirty logs. This prevents
failures being detected due to a clean filesystem being moved
between machines or kernels of different architectures (e.g. 32 ->
64 bit, BE -> LE, etc). This fixes a regression introduced by the
torn log write detection in 4.5-rc1"
* tag 'xfs-for-linus-4.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs:
xfs: only run torn log write detection on dirty logs
xfs: refactor in-core log state update to helper
xfs: refactor unmount record detection into helper
xfs: separate log head record discovery from verification
Pull vfs fixes from Al Viro:
"A couple of fixes: Fix for my dumb braino in ncpfs and a long-standing
breakage on recovery from failed rename() in jffs2"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
jffs2: reduce the breakage on recovery from halfway failed rename()
ncpfs: fix a braino in OOM handling in ncp_fill_cache()
It's basically harmless if "ref_level" isn't initialized since it's only
used for an error message, but it causes a static checker warning.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
So that its better organized.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
So that it indicates what it does.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It's better to show a warning message for the exceptional case
that one of objectid (in most case, inode number) reaches its
highest value. For example, if inode cache is off and this event
happens, we can't create any file even if there are not so many files.
This message ease detecting such problem.
Signed-off-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is more readable.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Some architectures have their reserved RAM in 64 Bit address space.
Therefore convert mem_address module parameter to ullong.
Signed-off-by: Wladislav Wiebe <wladislav.wiebe@nokia.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
BUFFER_TRACE info "call ext4_handle_dirty_metadata" doesn't match the
code, so drop it.
Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
On umount path, jbd2_journal_destroy() writes latest transaction ID
(->j_tail_sequence) to be used at next mount.
The bug is that ->j_tail_sequence is not holding latest transaction ID
in some cases. So, at next mount, there is chance to conflict with
remaining (not overwritten yet) transactions.
mount (id=10)
write transaction (id=11)
write transaction (id=12)
umount (id=10) <= the bug doesn't write latest ID
mount (id=10)
write transaction (id=11)
crash
mount
[recovery process]
transaction (id=11)
transaction (id=12) <= valid transaction ID, but old commit
must not replay
Like above, this bug become the cause of recovery failure, or FS
corruption.
So why ->j_tail_sequence doesn't point latest ID?
Because if checkpoint transactions was reclaimed by memory pressure
(i.e. bdev_try_to_free_page()), then ->j_tail_sequence is not updated.
(And another case is, __jbd2_journal_clean_checkpoint_list() is called
with empty transaction.)
So in above cases, ->j_tail_sequence is not pointing latest
transaction ID at umount path. Plus, REQ_FLUSH for checkpoint is not
done too.
So, to fix this problem with minimum changes, this patch updates
->j_tail_sequence, and issue REQ_FLUSH. (With more complex changes,
some optimizations would be possible to avoid unnecessary REQ_FLUSH
for example though.)
BTW,
journal->j_tail_sequence =
++journal->j_transaction_sequence;
Increment of ->j_transaction_sequence seems to be unnecessary, but
ext3 does this.
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Using SEEK_DATA in a huge sparse file can easily lead to sotflockups as
ext4_seek_data() iterates hole block-by-block. Fix the problem by using
returned hole size from ext4_map_blocks() and thus skip the hole in one
go.
Update also SEEK_HOLE implementation to follow the same pattern as
SEEK_DATA to make future maintenance easier.
Furthermore we add cond_resched() to both ext4_seek_data() and
ext4_seek_hole() to avoid softlockups in case evil user creates huge
fragmented file and we have to go through lots of extents.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4_dax_mmap_get_block() updates bh->b_state directly instead of using
ext4_update_bh_state(). This is mostly a cosmetic issue since DAX code
always passes on-stack buffer_head but clean this up to make code more
uniform.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently, ext4_map_blocks() just returns 0 when it finds a hole and
allocation is not requested. However we have all the information
available to tell how large the hole actually is and there are callers
of ext4_map_blocks() which would save some block-by-block hole iteration
if they knew this information. So fill in struct ext4_map_blocks even
for holes with the information we have. We keep returning 0 for holes to
maintain backward compatibility of the function.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4_ext_put_gap_in_cache() determines hole size in the extent tree,
then trims this with possible delayed allocated blocks, and inserts the
result into the extent status tree. Factor out determination of the size
of the hole in the extent tree as we will need this information in
ext4_ext_map_blocks() as well.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJW4N4xAAoJEPL5WVaVDYGjJQsH/i/9SP178CiaMeUp22PHmETi
UpCaQd9AY3xGGIjCktL2DC4NC86fjsRMYl1FJdVMxElUx54fuEU17wEW4BZyjUhI
aF9X7LfxQcxe+CRsY37ZdJ19nmE6EUZay8Vt/tB2LK/RvfruLNYmnzX5MmmjJY/S
1TKz6Jy5M0DTl+jpod2nv/xJ2j32WSPul8Un/iBinC16LPH+Q7KZRVjFLlf/krsM
SvZ1G6I70P7t9HW88BO9KhiYyxxuwqWC6SSoPMKTr4WeGnYQbA2JE6PJPktqsq76
Q91ucFkkGi+DZuZe5EuDMYMBrwaHQG8hKG3ueCj/pTu9IRErW94uO++H03bichk=
=Yjfq
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fix from Ted Ts'o:
"This fixes a regression which crept in v4.5-rc5"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: iterate over buffer heads correctly in move_extent_per_page()
We were setting referenced bit on the extent structure we return from
ext4_es_lookup_extent() which is just a private structure on stack. Thus
setting had no effect. Set the bit in the structure in the status tree
instead.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In commit bcff24887d ("ext4: don't read blocks from disk after extents
being swapped") bh is not updated correctly in the for loop and wrong
data has been written to disk. generic/324 catches this on sub-page
block size ext4.
Fixes: bcff24887d ("ext4: don't read blocks from disk after extentsbeing swapped")
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
dax_pfn_mkwrite() previously wasn't checking the return value of the
call to dax_radix_entry(), which was a mistake.
Instead, capture this return value and return the appropriate VM_FAULT_
value.
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ocfs2_page_mkwrite() could mistakenly return error code instead of
mkwrite status value. Fix it.
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Previously the client-core detected this condition by sheer luck!
Since we used strncpy, no NUL byte would be included on the name. The
client-core would call strlen, which would read past the end of its
buffer, but return a number large enough that the client-core would
return ENAMETOOLONG.
Signed-off-by: Martin Brandenburg <martin@omnibond.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
When mapping blocks for direct IO, we allocate io_end structure before
mapping blocks and store pointer to it in the inode. This creates a
requirement that any AIO DIO using io_end must be protected by i_mutex.
This created problems in the past with dioread_nolock mode which was
corrupting io_end pointers. Also io_end is allocated unnecessarily in
case where we don't need to convert any extents (which is a common case
for example when overwriting file).
We fix the problem by allocating io_end only once we return unwritten
extent from block mapping function for AIO DIO (so we can save some
pointless io_end allocations) and we pass pointer to it in bh->b_private
which generic DIO code later passes to our end IO callback. That way we
remove any need for global pointer to io_end structure and thus fix the
races.
The downside of this change is that the checking for unwritten IO in
flight in ext4_extents_can_be_merged() is more racy since we now
increment i_unwritten / set EXT4_STATE_DIO_UNWRITTEN only after dropping
i_data_sem. However the check has been racy already before because
ext4_writepages() already increment i_unwritten after dropping
i_data_sem and reserved blocks save us from hitting ENOSPC in the worst
case.
Signed-off-by: Jan Kara <jack@suse.cz>
There is no need to handle starting of a transaction and deferal of DIO
completion in _ext4_get_block() function. We can move this out to get
block functions for direct IO that need it. That way we can add stricter
checks verifying things work as we expect.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Rename ext4_get_blocks_write() to ext4_get_blocks_unwritten() to better
describe what it does. Also split out get blocks functions for direct
IO. Later we move functionality from _ext4_get_blocks() there. There's no
functional change in this patch.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently we've used hashed aio_mutex to serialize unaligned AIO DIO.
However the code cleanups that happened after 2011 when the lock was
introduced made aio_mutex acquired at almost the same places where we
already have exclusion using i_mutex. So just use i_mutex for the
exclusion of unaligned AIO DIO.
The change moves waiting for pending unwritten extent conversion under
i_mutex. That makes special handling of O_APPEND writes unnecessary and
also avoids possible livelocking of unaligned AIO DIO with aligned one
(nothing was preventing contiguous stream of aligned AIO DIOs to let
unaligned AIO DIO wait forever).
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
On 64-bit architectures we have two 4-byte holes in struct ext4_io_end.
Order entries better to avoid this and thus make the structure occupy
64 instead of 72 bytes for 64-bit architectures.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
bp_release is set to 0 just before the breakpoint of the for loop before
the conditional check (in line 458). The other breakpoint is a goto that
skips the dead code.
Addresses-Coverity-Id: 102338
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Check the sizes of XFS on-disk structures when compiling the kernel.
Use this to catch inadvertent changes in structure size due to padding
and alignment issues, etc.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
d_instantiate(new_dentry, old_inode) is absolutely wrong thing to
do - it will oops if new_dentry used to be positive, for starters.
What we need is d_invalidate() the target and be done with that.
Cc: stable@vger.kernel.org # v3.18+
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Failing to allocate an inode for child means that cache for *parent* is
incompletely populated. So it's parent directory inode ('dir') that
needs NCPI_DIR_CACHE flag removed, *not* the child inode ('inode', which
is what we'd failed to allocate in the first place).
Fucked-up-in: commit 5e993e25 ("ncpfs: get rid of d_validate() nonsense")
Fucked-up-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@vger.kernel.org # v3.19
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
ecclayout->oobavail is just redundant with the mtd->oobavail field.
Moreover, it prevents static const definition of ecc layouts since the
NAND framework is calculating this value based on the ecclayout->oobfree
field.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Pull overlayfs fixes from Miklos Szeredi:
"Overlayfs bug fixes. All marked as -stable material"
* 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: copy new uid/gid into overlayfs runtime inode
ovl: ignore lower entries when checking purity of non-directory entries
ovl: fix getcwd() failure after unsuccessful rmdir
ovl: fix working on distributed fs as lower layer
We need to create a new ioend if the current writepage call isn't
logically contiguous with the range contained in the previous ioend.
Hopefully writepage gets called in order of increasing file offset.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Use named array initializers for the string arrays used to dump log
items, rather than depending on the order being maintained correctly.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Commit 88740da18[1] introduced a function to compute the maximum
height of the inode btree back in 1994. Back then, apparently, the
freespace and inode btrees shared the same geometry; however, it has
long since been the case that the inode and freespace btrees have
different record and key sizes. Therefore, we must use m_inobt_mnr if
we want a correct calculation/log reservation/etc.
(Yes, this bug has been around for 21 years and ten months.)
(Yes, I was in middle school when this bug was committed.)
[1] http://oss.sgi.com/cgi-bin/gitweb.cgi?p=archive/xfs-import.git;a=commitdiff;h=88740da18ddd9d7ba3ebaa9502fefc6ef2fd19cd
Historical-research-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
If a crash occurs immediately after a filesystem grow operation, the
updated superblock geometry is found only in the log. After we
recover the log, the superblock is reread and re-initialised and so
has the new geometry in memory. If the new geometry has more AGs
than prior to the grow operation, then the new AGs will not have
in-memory xfs_perag structurea associated with them.
This will result in an oops when the first metadata buffer from a
new AG is looked up in the buffer cache, as the block lies within
the new geometry but then fails to find a perag structure on lookup.
This is easily fixed by simply re-initialising the perag structure
after re-reading the superblock at the conclusion of the first pahse
of log recovery.
This, however, does not fix the case of log recovery requiring
access to metadata in the newly grown space. Fortunately for us,
because the in-core superblock has not been updated, this will
result in detection of access beyond the end of the filesystem
and so recovery will fail at that point. If this proves to be
a problem, then we can address it separately to the current
reported issue.
Reported-by: Alex Lyakas <alex@zadarastorage.com>
Tested-by: Alex Lyakas <alex@zadarastorage.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
XFS uses CRC verification over a sub-range of the head of the log to
detect and handle torn writes. This torn log write detection currently
runs unconditionally at mount time, regardless of whether the log is
dirty or clean. This is problematic in cases where a filesystem might
end up being moved across different, incompatible (i.e., opposite
byte-endianness) architectures.
The problem lies in the fact that log data is not necessarily written in
an architecture independent format. For example, certain bits of data
are written in native endian format. Further, the size of certain log
data structures differs (i.e., struct xlog_rec_header) depending on the
word size of the cpu. This leads to false positive crc verification
errors and ultimately failed mounts when a cleanly unmounted filesystem
is mounted on a system with an incompatible architecture from data that
was written near the head of the log.
Update the log head/tail discovery code to run torn write detection only
when the log is not clean. This means something other than an unmount
record resides at the head of the log and log recovery is imminent. It
is a requirement to run log recovery on the same type of host that had
written the content of the dirty log and therefore CRC failures are
legitimate corruptions in that scenario.
Reported-by: Jan Beulich <JBeulich@suse.com>
Tested-by: Jan Beulich <JBeulich@suse.com>
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Once the record at the head of the log is identified and verified, the
in-core log state is updated based on the record. This includes
information such as the current head block and cycle, the start block of
the last record written to the log, the tail lsn, etc.
Once torn write detection is conditional, this logic will need to be
reused. Factor the code to update the in-core log data structures into a
new helper function. This patch does not change behavior.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Once the mount sequence has identified the head and tail blocks of the
physical log, the record at the head of the log is located and examined
for an unmount record to determine if the log is clean. This currently
occurs after torn write verification of the head region of the log.
This must ultimately be separated from torn write verification and may
need to be called again if the log head is walked back due to a torn
write (to determine whether the new head record is an unmount record).
Separate this logic into a new helper function. This patch does not
change behavior.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The code that locates the log record at the head of the log is buried in
the log head verification function. This is fine when torn write
verification occurs unconditionally, but this behavior is problematic
for filesystems that might be moved across systems with different
architectures.
In preparation for separating examination of the log head for unmount
records from torn write detection, lift the record location logic out of
the log verification function and into the caller. This patch does not
change behavior.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Pull ceph fix from Sage Weil:
"This is a final commit we missed to align the protocol compatibility
with the feature bits.
It decodes a few extra fields in two different messages and reports
EIO when they are used (not yet supported)"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
ceph: initial CEPH_FEATURE_FS_FILE_LAYOUT_V2 support
Replace the current NULL-terminated array of default groups with a linked
list. This gets rid of lots of nasty code to size and/or dynamically
allocate the array.
While we're at it also provide a conveniant helper to remove the default
groups.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Felipe Balbi <balbi@kernel.org> [drivers/usb/gadget]
Acked-by: Joel Becker <jlbec@evilplan.org>
Acked-by: Nicholas Bellinger <nab@linux-iscsi.org>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Pull block fixes from Jens Axboe:
"Round 2 of this. I cut back to the bare necessities, the patch is
still larger than it usually would be at this time, due to the number
of NVMe fixes in there. This pull request contains:
- The 4 core fixes from Ming, that fix both problems with exceeding
the virtual boundary limit in case of merging, and the gap checking
for cloned bio's.
- NVMe fixes from Keith and Christoph:
- Regression on larger user commands, causing problems with
reading log pages (for instance). This touches both NVMe,
and the block core since that is now generally utilized also
for these types of commands.
- Hot removal fixes.
- User exploitable issue with passthrough IO commands, if !length
is given, causing us to fault on writing to the zero
page.
- Fix for a hang under error conditions
- And finally, the current series regression for umount with cgroup
writeback, where the final flush would happen async and hence open
up window after umount where the device wasn't consistent. fsck
right after umount would show this. From Tejun"
* 'for-linus2' of git://git.kernel.dk/linux-block:
block: support large requests in blk_rq_map_user_iov
block: fix blk_rq_get_max_sectors for driver private requests
nvme: fix max_segments integer truncation
nvme: set queue limits for the admin queue
writeback: flush inode cgroup wb switches instead of pinning super_block
NVMe: Fix 0-length integrity payload
NVMe: Don't allow unsupported flags
NVMe: Move error handling to failed reset handler
NVMe: Simplify device reset failure
NVMe: Fix namespace removal deadlock
NVMe: Use IDA for namespace disk naming
NVMe: Don't unmap controller registers on reset
block: merge: get the 1st and last bvec via helpers
block: get the 1st and last bvec via helpers
block: check virt boundary in bio_will_gap()
block: bio: introduce helpers to get the 1st and last bvec
• a lock ordering problem between the page lock and the internal f->sem
mutex, which was causing occasional deadlocks in garbage collection, and
• a scan failure causing moved directories to sometimes end up appearing
to have hard links.
There are also a couple of trivial MAINTAINERS file updates.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAlbaGIsACgkQdwG7hYl686OpGQCgu0l4E7cQ/v1Af9kZatj6fnzN
LvcAnR3SzmiH1jxNGSY7C1mUQWosRl/9
=Ker9
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20160304' of git://git.infradead.org/linux-mtd
Pull jffs2 fixes from David Woodhouse:
"This contains two important JFFS2 fixes marked for stable:
- a lock ordering problem between the page lock and the internal
f->sem mutex, which was causing occasional deadlocks in garbage
collection
- a scan failure causing moved directories to sometimes end up
appearing to have hard links.
There are also a couple of trivial MAINTAINERS file updates"
* tag 'for-linus-20160304' of git://git.infradead.org/linux-mtd:
MAINTAINERS: add maintainer entry for FREESCALE GPMI NAND driver
Fix directory hardlinks from deleted directories
jffs2: Fix page lock / f->sem deadlock
Revert "jffs2: Fix lock acquisition order bug in jffs2_write_begin"
MAINTAINERS: update Han's email
Pull btrfs fix from Chris Mason:
"Filipe nailed down a problem where tree log replay would do some work
that orphan code wasn't expecting to be done yet, leading to BUG_ON"
* 'for-linus-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: fix loading of orphan roots leading to BUG_ON
Add support for the format change of MClientReply/MclientCaps.
Also add code that denies access to inodes with pool_ns layouts.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
Reviewed-by: Sage Weil <sage@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Stephen Bates <stephen.bates@pmcs.com>
Tested-by: Stephen Bates <stephen.bates@pmcs.com>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This adds a flag that tells the file system that this is a high priority
request for which it's worth to poll the hardware. The flag is purely
advisory and can be ignored if not supported.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Stephen Bates <stephen.bates@pmcs.com>
Tested-by: Stephen Bates <stephen.bates@pmcs.com>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
New syscalls that take an flag argument. No flags are added yet in this
patch.
Signed-off-by: Milosz Tanski <milosz@adfin.com>
[hch: rebased on top of my kiocb changes]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Stephen Bates <stephen.bates@pmcs.com>
Tested-by: Stephen Bates <stephen.bates@pmcs.com>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This way we can set kiocb flags also from the sync read/write path for
the read_iter/write_iter operations. For now there is no way to pass
flags to plain read/write operations as there is no real need for that,
and all flags passed are explicitly rejected for these files.
Signed-off-by: Milosz Tanski <milosz@adfin.com>
[hch: rebased on top of my kiocb changes]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Stephen Bates <stephen.bates@pmcs.com>
Tested-by: Stephen Bates <stephen.bates@pmcs.com>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
When looking for orphan roots during mount we can end up hitting a
BUG_ON() (at root-item.c:btrfs_find_orphan_roots()) if a log tree is
replayed and qgroups are enabled. This is because after a log tree is
replayed, a transaction commit is made, which triggers qgroup extent
accounting which in turn does backref walking which ends up reading and
inserting all roots in the radix tree fs_info->fs_root_radix, including
orphan roots (deleted snapshots). So after the log tree is replayed, when
finding orphan roots we hit the BUG_ON with the following trace:
[118209.182438] ------------[ cut here ]------------
[118209.183279] kernel BUG at fs/btrfs/root-tree.c:314!
[118209.184074] invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
[118209.185123] Modules linked in: btrfs dm_flakey dm_mod crc32c_generic ppdev xor raid6_pq evdev sg parport_pc parport acpi_cpufreq tpm_tis tpm psmouse
processor i2c_piix4 serio_raw pcspkr i2c_core button loop autofs4 ext4 crc16 mbcache jbd2 sd_mod sr_mod cdrom ata_generic virtio_scsi ata_piix libata
virtio_pci virtio_ring virtio scsi_mod e1000 floppy [last unloaded: btrfs]
[118209.186318] CPU: 14 PID: 28428 Comm: mount Tainted: G W 4.5.0-rc5-btrfs-next-24+ #1
[118209.186318] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS by qemu-project.org 04/01/2014
[118209.186318] task: ffff8801ec131040 ti: ffff8800af34c000 task.ti: ffff8800af34c000
[118209.186318] RIP: 0010:[<ffffffffa04237d7>] [<ffffffffa04237d7>] btrfs_find_orphan_roots+0x1fc/0x244 [btrfs]
[118209.186318] RSP: 0018:ffff8800af34faa8 EFLAGS: 00010246
[118209.186318] RAX: 00000000ffffffef RBX: 00000000ffffffef RCX: 0000000000000001
[118209.186318] RDX: 0000000080000000 RSI: 0000000000000001 RDI: 00000000ffffffff
[118209.186318] RBP: ffff8800af34fb08 R08: 0000000000000001 R09: 0000000000000000
[118209.186318] R10: ffff8800af34f9f0 R11: 6db6db6db6db6db7 R12: ffff880171b97000
[118209.186318] R13: ffff8801ca9d65e0 R14: ffff8800afa2e000 R15: 0000160000000000
[118209.186318] FS: 00007f5bcb914840(0000) GS:ffff88023edc0000(0000) knlGS:0000000000000000
[118209.186318] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[118209.186318] CR2: 00007f5bcaceb5d9 CR3: 00000000b49b5000 CR4: 00000000000006e0
[118209.186318] Stack:
[118209.186318] fffffbffffffffff 010230ffffffffff 0101000000000000 ff84000000000000
[118209.186318] fbffffffffffffff 30ffffffffffffff 0000000000000101 ffff880082348000
[118209.186318] 0000000000000000 ffff8800afa2e000 ffff8800afa2e000 0000000000000000
[118209.186318] Call Trace:
[118209.186318] [<ffffffffa042e2db>] open_ctree+0x1e37/0x21b9 [btrfs]
[118209.186318] [<ffffffffa040a753>] btrfs_mount+0x97e/0xaed [btrfs]
[118209.186318] [<ffffffff8108e1c0>] ? trace_hardirqs_on+0xd/0xf
[118209.186318] [<ffffffff8117b87e>] mount_fs+0x67/0x131
[118209.186318] [<ffffffff81192d2b>] vfs_kern_mount+0x6c/0xde
[118209.186318] [<ffffffffa0409f81>] btrfs_mount+0x1ac/0xaed [btrfs]
[118209.186318] [<ffffffff8108e1c0>] ? trace_hardirqs_on+0xd/0xf
[118209.186318] [<ffffffff8108c26b>] ? lockdep_init_map+0xb9/0x1b3
[118209.186318] [<ffffffff8117b87e>] mount_fs+0x67/0x131
[118209.186318] [<ffffffff81192d2b>] vfs_kern_mount+0x6c/0xde
[118209.186318] [<ffffffff81195637>] do_mount+0x8a6/0x9e8
[118209.186318] [<ffffffff8119598d>] SyS_mount+0x77/0x9f
[118209.186318] [<ffffffff81493017>] entry_SYSCALL_64_fastpath+0x12/0x6b
[118209.186318] Code: 64 00 00 85 c0 89 c3 75 24 f0 41 80 4c 24 20 20 49 8b bc 24 f0 01 00 00 4c 89 e6 e8 e8 65 00 00 85 c0 89 c3 74 11 83 f8 ef 75 02 <0f> 0b
4c 89 e7 e8 da 72 00 00 eb 1c 41 83 bc 24 00 01 00 00 00
[118209.186318] RIP [<ffffffffa04237d7>] btrfs_find_orphan_roots+0x1fc/0x244 [btrfs]
[118209.186318] RSP <ffff8800af34faa8>
[118209.230735] ---[ end trace 83938f987d85d477 ]---
So fix this by not treating the error -EEXIST, returned when attempting
to insert a root already inserted by the backref walking code, as an error.
The following test case for xfstests reproduces the bug:
seq=`basename $0`
seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
tmp=/tmp/$$
status=1 # failure is the default!
trap "_cleanup; exit \$status" 0 1 2 3 15
_cleanup()
{
_cleanup_flakey
cd /
rm -f $tmp.*
}
# get standard environment, filters and checks
. ./common/rc
. ./common/filter
. ./common/dmflakey
# real QA test starts here
_supported_fs btrfs
_supported_os Linux
_require_scratch
_require_dm_target flakey
_require_metadata_journaling $SCRATCH_DEV
rm -f $seqres.full
_scratch_mkfs >>$seqres.full 2>&1
_init_flakey
_mount_flakey
_run_btrfs_util_prog quota enable $SCRATCH_MNT
# Create 2 directories with one file in one of them.
# We use these just to trigger a transaction commit later, moving the file from
# directory a to directory b and doing an fsync against directory a.
mkdir $SCRATCH_MNT/a
mkdir $SCRATCH_MNT/b
touch $SCRATCH_MNT/a/f
sync
# Create our test file with 2 4K extents.
$XFS_IO_PROG -f -s -c "pwrite -S 0xaa 0 8K" $SCRATCH_MNT/foobar | _filter_xfs_io
# Create a snapshot and delete it. This doesn't really delete the snapshot
# immediately, just makes it inaccessible and invisible to user space, the
# snapshot is deleted later by a dedicated kernel thread (cleaner kthread)
# which is woke up at the next transaction commit.
# A root orphan item is inserted into the tree of tree roots, so that if a
# power failure happens before the dedicated kernel thread does the snapshot
# deletion, the next time the filesystem is mounted it resumes the snapshot
# deletion.
_run_btrfs_util_prog subvolume snapshot $SCRATCH_MNT $SCRATCH_MNT/snap
_run_btrfs_util_prog subvolume delete $SCRATCH_MNT/snap
# Now overwrite half of the extents we wrote before. Because we made a snapshpot
# before, which isn't really deleted yet (since no transaction commit happened
# after we did the snapshot delete request), the non overwritten extents get
# referenced twice, once by the default subvolume and once by the snapshot.
$XFS_IO_PROG -c "pwrite -S 0xbb 4K 8K" $SCRATCH_MNT/foobar | _filter_xfs_io
# Now move file f from directory a to directory b and fsync directory a.
# The fsync on the directory a triggers a transaction commit (because a file
# was moved from it to another directory) and the file fsync leaves a log tree
# with file extent items to replay.
mv $SCRATCH_MNT/a/f $SCRATCH_MNT/a/b
$XFS_IO_PROG -c "fsync" $SCRATCH_MNT/a
$XFS_IO_PROG -c "fsync" $SCRATCH_MNT/foobar
echo "File digest before power failure:"
md5sum $SCRATCH_MNT/foobar | _filter_scratch
# Now simulate a power failure and mount the filesystem to replay the log tree.
# After the log tree was replayed, we used to hit a BUG_ON() when processing
# the root orphan item for the deleted snapshot. This is because when processing
# an orphan root the code expected to be the first code inserting the root into
# the fs_info->fs_root_radix radix tree, while in reallity it was the second
# caller attempting to do it - the first caller was the transaction commit that
# took place after replaying the log tree, when updating the qgroup counters.
_flakey_drop_and_remount
echo "File digest before after failure:"
# Must match what he got before the power failure.
md5sum $SCRATCH_MNT/foobar | _filter_scratch
_unmount_flakey
status=0
exit
Fixes: 2d9e977610 ("Btrfs: use btrfs_get_fs_root in resolve_indirect_ref")
Cc: stable@vger.kernel.org # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
block_dev's .writepages/.writepage already handles
wbc_init_bio/wbc_account_io. We only set the SB_I_CGROUPWB bit to
suppport writeback cgroup support.
Signed-off-by: Shaohua Li <shli@fb.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
If cgroup writeback is in use, inodes can be scheduled for
asynchronous wb switching. Before 5ff8eaac16 ("writeback: keep
superblock pinned during cgroup writeback association switches"), this
could race with umount leading to super_block being destroyed while
inodes are pinned for wb switching. 5ff8eaac16 fixed it by bumping
s_active while wb switches are in flight; however, this allowed
in-flight wb switches to make umounts asynchronous when the userland
expected synchronosity - e.g. fsck immediately following umount may
fail because the device is still busy.
This patch removes the problematic super_block pinning and instead
makes generic_shutdown_super() flush in-flight wb switches. wb
switches are now executed on a dedicated isw_wq so that they can be
flushed and isw_nr_in_flight keeps track of the number of in-flight wb
switches so that flushing can be avoided in most cases.
v2: Move cgroup_writeback_umount() further below and add MS_ACTIVE
check in inode_switch_wbs() as Jan an Al suggested.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Tahsin Erdogan <tahsin@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Link: http://lkml.kernel.org/g/CAAeU0aNCq7LGODvVGRU-oU_o-6enii5ey0p1c26D1ZzYwkDc5A@mail.gmail.com
Fixes: 5ff8eaac16 ("writeback: keep superblock pinned during cgroup writeback association switches")
Cc: stable@vger.kernel.org #v4.5
Reviewed-by: Jan Kara <jack@suse.cz>
Tested-by: Tahsin Erdogan <tahsin@google.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Overlayfs must update uid/gid after chown, otherwise functions
like inode_owner_or_capable() will check user against stale uid.
Catched by xfstests generic/087, it chowns file and calls utimes.
Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com>
Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Cc: <stable@vger.kernel.org>
After rename file dentry still holds reference to lower dentry from
previous location. This doesn't matter for data access because data comes
from upper dentry. But this stale lower dentry taints dentry at new
location and turns it into non-pure upper. Such file leaves visible
whiteout entry after remove in directory which shouldn't have whiteouts at
all.
Overlayfs already tracks pureness of file location in oe->opaque. This
patch just uses that for detecting actual path type.
Comment from Vivek Goyal's patch:
Here are the details of the problem. Do following.
$ mkdir upper lower work merged upper/dir/
$ touch lower/test
$ sudo mount -t overlay overlay -olowerdir=lower,upperdir=upper,workdir=
work merged
$ mv merged/test merged/dir/
$ rm merged/dir/test
$ ls -l merged/dir/
/usr/bin/ls: cannot access merged/dir/test: No such file or directory
total 0
c????????? ? ? ? ? ? test
Basic problem seems to be that once a file has been unlinked, a whiteout
has been left behind which was not needed and hence it becomes visible.
Whiteout is visible because parent dir is of not type MERGE, hence
od->is_real is set during ovl_dir_open(). And that means ovl_iterate()
passes on iterate handling directly to underlying fs. Underlying fs does
not know/filter whiteouts so it becomes visible to user.
Why did we leave a whiteout to begin with when we should not have.
ovl_do_remove() checks for OVL_TYPE_PURE_UPPER() and does not leave
whiteout if file is pure upper. In this case file is not found to be pure
upper hence whiteout is left.
So why file was not PURE_UPPER in this case? I think because dentry is
still carrying some leftover state which was valid before rename. For
example, od->numlower was set to 1 as it was a lower file. After rename,
this state is not valid anymore as there is no such file in lower.
Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com>
Reported-by: Viktor Stanchev <me@viktorstanchev.com>
Suggested-by: Vivek Goyal <vgoyal@redhat.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=109611
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Cc: <stable@vger.kernel.org>
ovl_remove_upper() should do d_drop() only after it successfully
removes the dir, otherwise a subsequent getcwd() system call will
fail, breaking userspace programs.
This is to fix: https://bugzilla.kernel.org/show_bug.cgi?id=110491
Signed-off-by: Rui Wang <rui.y.wang@intel.com>
Reviewed-by: Konstantin Khlebnikov <koct9i@gmail.com>
Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Cc: <stable@vger.kernel.org>
