Commit Graph

18 Commits

Author SHA1 Message Date
Vipin Sharma
89c313f20c KVM: x86/mmu: Atomically clear SPTE dirty state in the clear-dirty-log flow
Optimize the clearing of dirty state in TDP MMU SPTEs by doing an
atomic-AND (on SPTEs that have volatile bits) instead of the full XCHG
that currently ends up being invoked (see kvm_tdp_mmu_write_spte()).
Clearing _only_ the bit in question will allow KVM to skip the many
irrelevant checks in __handle_changed_spte() by avoiding any collateral
damage due to the XCHG writing all SPTE bits, e.g. the XCHG could race
with fast_page_fault() setting the W-bit and the CPU setting the D-bit,
and thus incorrectly drop the CPU's D-bit update.

Link: https://lore.kernel.org/all/Y9hXmz%2FnDOr1hQal@google.com
Signed-off-by: Vipin Sharma <vipinsh@google.com>
Reviewed-by: David Matlack <dmatlack@google.com>
[sean: split the switch to atomic-AND to a separate patch]
Link: https://lore.kernel.org/r/20230321220021.2119033-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
2023-04-04 12:37:30 -07:00
Vipin Sharma
41e07665f1 KVM: x86/mmu: Add a helper function to check if an SPTE needs atomic write
Move conditions in kvm_tdp_mmu_write_spte() to check if an SPTE should
be written atomically or not to a separate function.

This new function, kvm_tdp_mmu_spte_need_atomic_write(),  will be used
in future commits to optimize clearing bits in SPTEs.

Signed-off-by: Vipin Sharma <vipinsh@google.com>
Reviewed-by: David Matlack <dmatlack@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Link: https://lore.kernel.org/r/20230321220021.2119033-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
2023-04-04 12:37:30 -07:00
Sean Christopherson
85f44f8cc0 KVM: x86/mmu: Don't bottom out on leafs when zapping collapsible SPTEs
When zapping collapsible SPTEs in the TDP MMU, don't bottom out on a leaf
SPTE now that KVM doesn't require a PFN to compute the host mapping level,
i.e. now that there's no need to first find a leaf SPTE and then step
back up.

Drop the now unused tdp_iter_step_up(), as it is not the safest of
helpers (using any of the low level iterators requires some understanding
of the various side effects).

Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220715232107.3775620-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-07-28 13:22:24 -04:00
Ben Gardon
5ba7c4c6d1 KVM: x86/MMU: Zap non-leaf SPTEs when disabling dirty logging
Currently disabling dirty logging with the TDP MMU is extremely slow.
On a 96 vCPU / 96G VM backed with gigabyte pages, it takes ~200 seconds
to disable dirty logging with the TDP MMU, as opposed to ~4 seconds with
the shadow MMU.

When disabling dirty logging, zap non-leaf parent entries to allow
replacement with huge pages instead of recursing and zapping all of the
child, leaf entries. This reduces the number of TLB flushes required.
and reduces the disable dirty log time with the TDP MMU to ~3 seconds.

Opportunistically add a WARN() to catch GFNs that are mapped at a
higher level than their max level.

Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20220525230904.1584480-1-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-06-07 11:28:49 -04:00
Sean Christopherson
ba3a6120a4 KVM: x86/mmu: Use atomic XCHG to write TDP MMU SPTEs with volatile bits
Use an atomic XCHG to write TDP MMU SPTEs that have volatile bits, even
if mmu_lock is held for write, as volatile SPTEs can be written by other
tasks/vCPUs outside of mmu_lock.  If a vCPU uses the to-be-modified SPTE
to write a page, the CPU can cache the translation as WRITABLE in the TLB
despite it being seen by KVM as !WRITABLE, and/or KVM can clobber the
Accessed/Dirty bits and not properly tag the backing page.

Exempt non-leaf SPTEs from atomic updates as KVM itself doesn't modify
non-leaf SPTEs without holding mmu_lock, they do not have Dirty bits, and
KVM doesn't consume the Accessed bit of non-leaf SPTEs.

Dropping the Dirty and/or Writable bits is most problematic for dirty
logging, as doing so can result in a missed TLB flush and eventually a
missed dirty page.  In the unlikely event that the only dirty page(s) is
a clobbered SPTE, clear_dirty_gfn_range() will see the SPTE as not dirty
(based on the Dirty or Writable bit depending on the method) and so not
update the SPTE and ultimately not flush.  If the SPTE is cached in the
TLB as writable before it is clobbered, the guest can continue writing
the associated page without ever taking a write-protect fault.

For most (all?) file back memory, dropping the Dirty bit is a non-issue.
The primary MMU write-protects its PTEs on writeback, i.e. KVM's dirty
bit is effectively ignored because the primary MMU will mark that page
dirty when the write-protection is lifted, e.g. when KVM faults the page
back in for write.

The Accessed bit is a complete non-issue.  Aside from being unused for
non-leaf SPTEs, KVM doesn't do a TLB flush when aging SPTEs, i.e. the
Accessed bit may be dropped anyways.

Lastly, the Writable bit is also problematic as an extension of the Dirty
bit, as KVM (correctly) treats the Dirty bit as volatile iff the SPTE is
!DIRTY && WRITABLE.  If KVM fixes an MMU-writable, but !WRITABLE, SPTE
out of mmu_lock, then it can allow the CPU to set the Dirty bit despite
the SPTE being !WRITABLE when it is checked by KVM.  But that all depends
on the Dirty bit being problematic in the first place.

Fixes: 2f2fad0897 ("kvm: x86/mmu: Add functions to handle changed TDP SPTEs")
Cc: stable@vger.kernel.org
Cc: Ben Gardon <bgardon@google.com>
Cc: David Matlack <dmatlack@google.com>
Cc: Venkatesh Srinivas <venkateshs@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220423034752.1161007-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-05-03 07:22:32 -04:00
Sean Christopherson
bb95dfb9e2 KVM: x86/mmu: Defer TLB flush to caller when freeing TDP MMU shadow pages
Defer TLB flushes to the caller when freeing TDP MMU shadow pages instead
of immediately flushing.  Because the shadow pages are freed in an RCU
callback, so long as at least one CPU holds RCU, all CPUs are protected.
For vCPUs running in the guest, i.e. consuming TLB entries, KVM only
needs to ensure the caller services the pending TLB flush before dropping
its RCU protections.  I.e. use the caller's RCU as a proxy for all vCPUs
running in the guest.

Deferring the flushes allows batching flushes, e.g. when installing a
1gb hugepage and zapping a pile of SPs.  And when zapping an entire root,
deferring flushes allows skipping the flush entirely (because flushes are
not needed in that case).

Avoiding flushes when zapping an entire root is especially important as
synchronizing with other CPUs via IPI after zapping every shadow page can
cause significant performance issues for large VMs.  The issue is
exacerbated by KVM zapping entire top-level entries without dropping
RCU protection, which can lead to RCU stalls even when zapping roots
backing relatively "small" amounts of guest memory, e.g. 2tb.  Removing
the IPI bottleneck largely mitigates the RCU issues, though it's likely
still a problem for 5-level paging.  A future patch will further address
the problem by zapping roots in multiple passes to avoid holding RCU for
an extended duration.

Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220226001546.360188-20-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-03-08 09:31:57 -05:00
Sean Christopherson
c10743a182 KVM: x86/mmu: Zap only the target TDP MMU shadow page in NX recovery
When recovering a potential hugepage that was shattered for the iTLB
multihit workaround, precisely zap only the target page instead of
iterating over the TDP MMU to find the SP that was passed in.  This will
allow future simplification of zap_gfn_range() by having it zap only
leaf SPTEs.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220226001546.360188-14-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-03-08 09:31:54 -05:00
Sean Christopherson
0e587aa733 KVM: x86/mmu: Add helpers to read/write TDP MMU SPTEs and document RCU
Add helpers to read and write TDP MMU SPTEs instead of open coding
rcu_dereference() all over the place, and to provide a convenient
location to document why KVM doesn't exempt holding mmu_lock for write
from having to hold RCU (and any future changes to the rules).

No functional change intended.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Message-Id: <20220226001546.360188-11-seanjc@google.com>
Reviewed-by: Mingwei Zhang <mizhang@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-03-08 09:31:52 -05:00
David Matlack
77aa60753a KVM: x86/mmu: Refactor TDP MMU iterators to take kvm_mmu_page root
Instead of passing a pointer to the root page table and the root level
separately, pass in a pointer to the root kvm_mmu_page struct.  This
reduces the number of arguments by 1, cutting down on line lengths.

No functional change intended.

Reviewed-by: Ben Gardon <bgardon@google.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20220119230739.2234394-12-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-02-10 13:50:40 -05:00
Sean Christopherson
3a0f64de47 KVM: x86/mmu: Don't advance iterator after restart due to yielding
After dropping mmu_lock in the TDP MMU, restart the iterator during
tdp_iter_next() and do not advance the iterator.  Advancing the iterator
results in skipping the top-level SPTE and all its children, which is
fatal if any of the skipped SPTEs were not visited before yielding.

When zapping all SPTEs, i.e. when min_level == root_level, restarting the
iter and then invoking tdp_iter_next() is always fatal if the current gfn
has as a valid SPTE, as advancing the iterator results in try_step_side()
skipping the current gfn, which wasn't visited before yielding.

Sprinkle WARNs on iter->yielded being true in various helpers that are
often used in conjunction with yielding, and tag the helper with
__must_check to reduce the probabily of improper usage.

Failing to zap a top-level SPTE manifests in one of two ways.  If a valid
SPTE is skipped by both kvm_tdp_mmu_zap_all() and kvm_tdp_mmu_put_root(),
the shadow page will be leaked and KVM will WARN accordingly.

  WARNING: CPU: 1 PID: 3509 at arch/x86/kvm/mmu/tdp_mmu.c:46 [kvm]
  RIP: 0010:kvm_mmu_uninit_tdp_mmu+0x3e/0x50 [kvm]
  Call Trace:
   <TASK>
   kvm_arch_destroy_vm+0x130/0x1b0 [kvm]
   kvm_destroy_vm+0x162/0x2a0 [kvm]
   kvm_vcpu_release+0x34/0x60 [kvm]
   __fput+0x82/0x240
   task_work_run+0x5c/0x90
   do_exit+0x364/0xa10
   ? futex_unqueue+0x38/0x60
   do_group_exit+0x33/0xa0
   get_signal+0x155/0x850
   arch_do_signal_or_restart+0xed/0x750
   exit_to_user_mode_prepare+0xc5/0x120
   syscall_exit_to_user_mode+0x1d/0x40
   do_syscall_64+0x48/0xc0
   entry_SYSCALL_64_after_hwframe+0x44/0xae

If kvm_tdp_mmu_zap_all() skips a gfn/SPTE but that SPTE is then zapped by
kvm_tdp_mmu_put_root(), KVM triggers a use-after-free in the form of
marking a struct page as dirty/accessed after it has been put back on the
free list.  This directly triggers a WARN due to encountering a page with
page_count() == 0, but it can also lead to data corruption and additional
errors in the kernel.

  WARNING: CPU: 7 PID: 1995658 at arch/x86/kvm/../../../virt/kvm/kvm_main.c:171
  RIP: 0010:kvm_is_zone_device_pfn.part.0+0x9e/0xd0 [kvm]
  Call Trace:
   <TASK>
   kvm_set_pfn_dirty+0x120/0x1d0 [kvm]
   __handle_changed_spte+0x92e/0xca0 [kvm]
   __handle_changed_spte+0x63c/0xca0 [kvm]
   __handle_changed_spte+0x63c/0xca0 [kvm]
   __handle_changed_spte+0x63c/0xca0 [kvm]
   zap_gfn_range+0x549/0x620 [kvm]
   kvm_tdp_mmu_put_root+0x1b6/0x270 [kvm]
   mmu_free_root_page+0x219/0x2c0 [kvm]
   kvm_mmu_free_roots+0x1b4/0x4e0 [kvm]
   kvm_mmu_unload+0x1c/0xa0 [kvm]
   kvm_arch_destroy_vm+0x1f2/0x5c0 [kvm]
   kvm_put_kvm+0x3b1/0x8b0 [kvm]
   kvm_vcpu_release+0x4e/0x70 [kvm]
   __fput+0x1f7/0x8c0
   task_work_run+0xf8/0x1a0
   do_exit+0x97b/0x2230
   do_group_exit+0xda/0x2a0
   get_signal+0x3be/0x1e50
   arch_do_signal_or_restart+0x244/0x17f0
   exit_to_user_mode_prepare+0xcb/0x120
   syscall_exit_to_user_mode+0x1d/0x40
   do_syscall_64+0x4d/0x90
   entry_SYSCALL_64_after_hwframe+0x44/0xae

Note, the underlying bug existed even before commit 1af4a96025 ("KVM:
x86/mmu: Yield in TDU MMU iter even if no SPTES changed") moved calls to
tdp_mmu_iter_cond_resched() to the beginning of loops, as KVM could still
incorrectly advance past a top-level entry when yielding on a lower-level
entry.  But with respect to leaking shadow pages, the bug was introduced
by yielding before processing the current gfn.

Alternatively, tdp_mmu_iter_cond_resched() could simply fall through, or
callers could jump to their "retry" label.  The downside of that approach
is that tdp_mmu_iter_cond_resched() _must_ be called before anything else
in the loop, and there's no easy way to enfornce that requirement.

Ideally, KVM would handling the cond_resched() fully within the iterator
macro (the code is actually quite clean) and avoid this entire class of
bugs, but that is extremely difficult do while also supporting yielding
after tdp_mmu_set_spte_atomic() fails.  Yielding after failing to set a
SPTE is very desirable as the "owner" of the REMOVED_SPTE isn't strictly
bounded, e.g. if it's zapping a high-level shadow page, the REMOVED_SPTE
may block operations on the SPTE for a significant amount of time.

Fixes: faaf05b00a ("kvm: x86/mmu: Support zapping SPTEs in the TDP MMU")
Fixes: 1af4a96025 ("KVM: x86/mmu: Yield in TDU MMU iter even if no SPTES changed")
Reported-by: Ignat Korchagin <ignat@cloudflare.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211214033528.123268-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-12-20 08:06:53 -05:00
Sean Christopherson
08889894cc KVM: x86/mmu: Store the address space ID in the TDP iterator
Store the address space ID in the TDP iterator so that it can be
retrieved without having to bounce through the root shadow page.  This
streamlines the code and fixes a Sparse warning about not properly using
rcu_dereference() when grabbing the ID from the root on the fly.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20210315233803.2706477-5-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-03-16 14:16:34 -04:00
Ben Gardon
b601c3bc9d KVM: x86/mmu: Factor out tdp_iter_return_to_root
In tdp_mmu_iter_cond_resched there is a call to tdp_iter_start which
causes the iterator to continue its walk over the paging structure from
the root. This is needed after a yield as paging structure could have
been freed in the interim.

The tdp_iter_start call is not very clear and something of a hack. It
requires exposing tdp_iter fields not used elsewhere in tdp_mmu.c and
the effect is not obvious from the function name. Factor a more aptly
named function out of tdp_iter_start and call it from
tdp_mmu_iter_cond_resched and tdp_iter_start.

No functional change intended.

Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20210315233803.2706477-4-bgardon@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-03-16 14:16:17 -04:00
Ben Gardon
7cca2d0b7e KVM: x86/mmu: Protect TDP MMU page table memory with RCU
In order to enable concurrent modifications to the paging structures in
the TDP MMU, threads must be able to safely remove pages of page table
memory while other threads are traversing the same memory. To ensure
threads do not access PT memory after it is freed, protect PT memory
with RCU.

Protecting concurrent accesses to page table memory from use-after-free
bugs could also have been acomplished using
walk_shadow_page_lockless_begin/end() and READING_SHADOW_PAGE_TABLES,
coupling with the barriers in a TLB flush. The use of RCU for this case
has several distinct advantages over that approach.
1. Disabling interrupts for long running operations is not desirable.
   Future commits will allow operations besides page faults to operate
   without the exclusive protection of the MMU lock and those operations
   are too long to disable iterrupts for their duration.
2. The use of RCU here avoids long blocking / spinning operations in
   perfromance critical paths. By freeing memory with an asynchronous
   RCU API we avoid the longer wait times TLB flushes experience when
   overlapping with a thread in walk_shadow_page_lockless_begin/end().
3. RCU provides a separation of concerns when removing memory from the
   paging structure. Because the RCU callback to free memory can be
   scheduled immediately after a TLB flush, there's no need for the
   thread to manually free a queue of pages later, as commit_zap_pages
   does.

Fixes: 95fb5b0258 ("kvm: x86/mmu: Support MMIO in the TDP MMU")
Reviewed-by: Peter Feiner <pfeiner@google.com>
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Ben Gardon <bgardon@google.com>

Message-Id: <20210202185734.1680553-18-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-02-04 05:27:42 -05:00
Ben Gardon
ed5e484b79 KVM: x86/mmu: Ensure forward progress when yielding in TDP MMU iter
In some functions the TDP iter risks not making forward progress if two
threads livelock yielding to one another. This is possible if two threads
are trying to execute wrprot_gfn_range. Each could write protect an entry
and then yield. This would reset the tdp_iter's walk over the paging
structure and the loop would end up repeating the same entry over and
over, preventing either thread from making forward progress.

Fix this issue by only yielding if the loop has made forward progress
since the last yield.

Fixes: a6a0b05da9 ("kvm: x86/mmu: Support dirty logging for the TDP MMU")
Reviewed-by: Peter Feiner <pfeiner@google.com>
Signed-off-by: Ben Gardon <bgardon@google.com>

Message-Id: <20210202185734.1680553-14-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-02-04 05:27:40 -05:00
Ben Gardon
74953d3530 KVM: x86/mmu: Rename goal_gfn to next_last_level_gfn
The goal_gfn field in tdp_iter can be misleading as it implies that it
is the iterator's final goal. It is really a target for the lowest gfn
mapped by the leaf level SPTE the iterator will traverse towards. Change
the field's name to be more precise.

Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20210202185734.1680553-13-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-02-04 05:27:40 -05:00
Ben Gardon
a6a0b05da9 kvm: x86/mmu: Support dirty logging for the TDP MMU
Dirty logging is a key feature of the KVM MMU and must be supported by
the TDP MMU. Add support for both the write protection and PML dirty
logging modes.

Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell
machine. This series introduced no new failures.

This series can be viewed in Gerrit at:
	https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538

Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201014182700.2888246-16-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-23 03:42:13 -04:00
Ben Gardon
faaf05b00a kvm: x86/mmu: Support zapping SPTEs in the TDP MMU
Add functions to zap SPTEs to the TDP MMU. These are needed to tear down
TDP MMU roots properly and implement other MMU functions which require
tearing down mappings. Future patches will add functions to populate the
page tables, but as for this patch there will not be any work for these
functions to do.

Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell
machine. This series introduced no new failures.

This series can be viewed in Gerrit at:
	https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538

Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201014182700.2888246-8-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-21 18:17:02 -04:00
Ben Gardon
c9180b7291 kvm: x86/mmu: Introduce tdp_iter
The TDP iterator implements a pre-order traversal of a TDP paging
structure. This iterator will be used in future patches to create
an efficient implementation of the KVM MMU for the TDP case.

Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell
machine. This series introduced no new failures.

This series can be viewed in Gerrit at:
	https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538

Signed-off-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-21 18:17:00 -04:00