when testing the new pktgen module with multiple queues and ixgbe with:
pgset "flag QUEUE_MAP_CPU"
I found that I was getting errors in dmesg like:
pktgen: WARNING: QUEUE_MAP_CPU disabled because CPU count (8) exceeds number
<4>pktgen: WARNING: of tx queues (8) on eth15
you'll note, 8 really doesn't exceed 8.
This patch seemed to fix the logic errors and also the attempts at
limiting line length in printk (which didn't work anyway)
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Robert Olsson <robert.olsson@its.uu.se>
Signed-off-by: David S. Miller <davem@davemloft.net>
We have to be careful when we try to unhash the credential in
put_rpccred(), because we're not holding the credcache lock, so the call to
rpcauth_unhash_cred() may fail if someone else has looked the cred up, and
obtained a reference to it.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We need to make sure that we don't remove creds from the cred_unused list
if they are still under the moratorium, or else they will never get
garbage collected.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If the server sends us an RST error while we're in the TCP_ESTABLISHED
state, then that will not result in a state change, and so the RPC client
ends up hanging forever (see
http://bugzilla.kernel.org/show_bug.cgi?id=11154)
We can intercept the reset by setting up an sk->sk_error_report callback,
which will then allow us to initiate a proper shutdown and retry...
We also make sure that if the send request receives an ECONNRESET, then we
shutdown too...
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Initialise correctly last fields, so tasks can be actually executed.
On some architectures the initial jiffies value is not zero, so later
all rfkill incorrectly decides that rfkill_*.last is in future.
Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
David Miller noticed that commit
33ad798c92 '(tcp: options clean up')
did not move the req->cookie_ts check.
This essentially disabled commit 4dfc281702
'[Syncookies]: Add support for TCP options via timestamps.'.
This restores the original logic.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
This fixes a potential error packet loop.
Signed-off-by: Remi Denis-Courmont <remi.denis-courmont@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The default for the regulatory compatibility option is wrong;
if you picked the default you ended up with a non-functional wifi
system (at least I did on Fedora 9 with iwl4965).
I don't think even the October 2008 releases of the various distros
has the new userland so clearly the default is wrong, and also
we can't just go about deleting this in 2.6.29...
Change the default to "y" and also adjust the config text a little to
reflect this.
This patch fixes regression #11859
With thanks to Johannes Berg for the diagnostics
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (29 commits)
tcp: Restore ordering of TCP options for the sake of inter-operability
net: Fix disjunct computation of netdev features
sctp: Fix to handle SHUTDOWN in SHUTDOWN_RECEIVED state
sctp: Fix to handle SHUTDOWN in SHUTDOWN-PENDING state
sctp: Add check for the TSN field of the SHUTDOWN chunk
sctp: Drop ICMP packet too big message with MTU larger than current PMTU
p54: enable 2.4/5GHz spectrum by eeprom bits.
orinoco: reduce stack usage in firmware download path
ath5k: fix suspend-related oops on rmmod
[netdrvr] fec_mpc52xx: Implement polling, to make netconsole work.
qlge: Fix MSI/legacy single interrupt bug.
smc911x: Make the driver safer on SMP
smc911x: Add IRQ polarity configuration
smc911x: Allow Kconfig dependency on ARM
sis190: add identifier for Atheros AR8021 PHY
8139x: reduce message severity on driver overlap
igb: add IGB_DCA instead of selecting INTEL_IOATDMA
igb: fix tx data corruption with transition to L0s on 82575
ehea: Fix memory hotplug support
netdev: DM9000: remove BLACKFIN hacking in DM9000 netdev driver
...
This is not our bug! Sadly some devices cannot cope with the change
of TCP option ordering which was a result of the recent rewrite of
the option code (not that there was some particular reason steming
from the rewrite for the reordering) though any ordering of TCP
options is perfectly legal. Thus we restore the original ordering
to allow interoperability with/through such broken devices and add
some warning about this trap. Since the reordering just happened
without any particular reason, this change shouldn't cost us
anything.
There are already couple of known failure reports (within close
proximity of the last release), so the problem might be more
wide-spread than a single device. And other reports which may
be due to the same problem though the symptoms were less obvious.
Analysis of one of the case revealed (with very high probability)
that sack capability cannot be negotiated as the first option
(SYN never got a response).
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Reported-by: Aldo Maggi <sentiniate@tiscali.it>
Tested-by: Aldo Maggi <sentiniate@tiscali.it>
Signed-off-by: David S. Miller <davem@davemloft.net>
* 'v28-range-hrtimers-for-linus-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (37 commits)
hrtimers: add missing docbook comments to struct hrtimer
hrtimers: simplify hrtimer_peek_ahead_timers()
hrtimers: fix docbook comments
DECLARE_PER_CPU needs linux/percpu.h
hrtimers: fix typo
rangetimers: fix the bug reported by Ingo for real
rangetimer: fix BUG_ON reported by Ingo
rangetimer: fix x86 build failure for the !HRTIMERS case
select: fix alpha OSF wrapper
select: fix alpha OSF wrapper
hrtimer: peek at the timer queue just before going idle
hrtimer: make the futex() system call use the per process slack value
hrtimer: make the nanosleep() syscall use the per process slack
hrtimer: fix signed/unsigned bug in slack estimator
hrtimer: show the timer ranges in /proc/timer_list
hrtimer: incorporate feedback from Peter Zijlstra
hrtimer: add a hrtimer_start_range() function
hrtimer: another build fix
hrtimer: fix build bug found by Ingo
hrtimer: make select() and poll() use the hrtimer range feature
...
My change
commit e2a6b85247
net: Enable TSO if supported by at least one device
didn't do what was intended because the netdev_compute_features
function was designed for conjunctions. So what happened was that
it would simply take the TSO status of the last constituent device.
This patch extends it to support both conjunctions and disjunctions
under the new name of netdev_increment_features.
It also adds a new function netdev_fix_features which does the
sanity checking that usually occurs upon registration. This ensures
that the computation doesn't result in an illegal combination
since this checking is absent when the change is initiated via
ethtool.
The two users of netdev_compute_features have been converted.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Once an endpoint has reached the SHUTDOWN-RECEIVED state,
it MUST NOT send a SHUTDOWN in response to a ULP request.
The Cumulative TSN Ack of the received SHUTDOWN chunk
MUST be processed.
This patch fix to process Cumulative TSN Ack of the received
SHUTDOWN chunk in SHUTDOWN_RECEIVED state.
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If SHUTDOWN is received in SHUTDOWN-PENDING state, enpoint should enter
the SHUTDOWN-RECEIVED state and check the Cumulative TSN Ack field of
the SHUTDOWN chunk (RFC 4960 Section 9.2). If the SHUTDOWN chunk can
acknowledge all of the send DATA chunks, SHUTDOWN-ACK should be sent.
But now endpoint just silently discarded the SHUTDOWN chunk.
SHUTDOWN received in SHUTDOWN-PENDING state can happend when the last
SACK is lost by network, or the SHUTDOWN chunk can acknowledge all of
the received DATA chunks. The packet sequence(SACK lost) is like this:
Endpoint A Endpoint B ULP
(ESTABLISHED) (ESTABLISHED)
<----------- DATA
<--- shutdown
Enter SHUTDOWN-PENDING state
SACK ----lost---->
SHUTDOWN(*1) ------------>
<----------- SHUTDOWN-ACK
(*1) silently discarded now.
This patch fix to handle SHUTDOWN in SHUTDOWN-PENDING state as the same
as ESTABLISHED state.
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If SHUTDOWN chunk is received Cumulative TSN Ack beyond the max tsn currently
send, SHUTDOWN chunk be accepted and the association will be broken. New data
is send, but after received SACK it will be drop because TSN in SACK is less
than the Cumulative TSN, data will be retrans again and again even if correct
SACK is received.
The packet sequence is like this:
Endpoint A Endpoint B ULP
(ESTABLISHED) (ESTABLISHED)
<----------- DATA (TSN=x-1)
<----------- DATA (TSN=x)
SHUTDOWN -----------> (Now Cumulative TSN=x+1000)
(TSN=x+1000)
<----------- DATA (TSN=x+1)
SACK -----------> drop the SACK
(TSN=x+1)
<----------- DATA (TSN=x+1)(retrans)
This patch fix this problem by terminating the association and respond to
the sender with an ABORT.
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If ICMP packet too big message is received with MTU larger than current
PMTU, SCTP will still accept this ICMP message and sync the PMTU of assoc
with the wrong MTU.
Endpoing A Endpoint B
(ESTABLISHED) (ESTABLISHED)
ICMP --------->
(packet too big, MTU too larger)
sync PMTU
This patch fixed the problem by drop that ICMP message.
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Several sparse warnings were introduced by patches accepted during the merge
window which weren't caught. This patch fixes those warnings.
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
This patch implements the RDMA transport provider for 9P. It allows
mounts to be performed over iWARP and IB capable network interfaces.
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Signed-off-by: Latchesar Ionkov <lionkov@lanl.gov>
Fixes build problem with 9p when building with debug disabled.
Also contains some fixes for warnings which pop up when
CONFIG_NET_9P_DEBUG is disabled.
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
While looking for the recent "sack issue" I also read all eff_sacks
usage that was played around by some relevant commit. I found
out that there's another thing that is asking for a fix (unrelated
to the "sack issue" though).
This feature has probably very little significance in practice.
Opposite direction timeout with bidirectional tcp comes to me as
the most likely scenario though there might be other cases as
well related to non-data segments we send (e.g., response to the
opposite direction segment). Also some ACK losses or option space
wasted for other purposes is necessary to prevent the earlier
SACK feedback getting to the sender.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs: (26 commits)
9p: add more conservative locking
9p: fix oops in protocol stat parsing error path.
9p: fix device file handling
9p: Improve debug support
9p: eliminate depricated conv functions
9p: rework client code to use new protocol support functions
9p: remove unnecessary tag field from p9_req_t structure
9p: remove 9p fcall debug prints
9p: add new protocol support code
9p: encapsulate version function
9p: move dirread to fs layer
9p: adjust 9p vfs write operation
9p: move readn meta-function from client to fs layer
9p: consolidate read/write functions
9p: drop broken unused error path from p9_conn_create()
9p: make rpc code common and rework flush code
9p: use the rcall structure passed in the request in trans_fd read_work
9p: apply common request code to trans_fd
9p: apply common tagpool handling to trans_fd
9p: move request management to client code
...
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
netfilter: replace old NF_ARP calls with NFPROTO_ARP
netfilter: fix compilation error with NAT=n
netfilter: xt_recent: use proc_create_data()
netfilter: snmp nat leaks memory in case of failure
netfilter: xt_iprange: fix range inversion match
netfilter: netns: use NFPROTO_NUMPROTO instead of NUMPROTO for tables array
netfilter: ctnetlink: remove obsolete NAT dependency from Kconfig
pkt_sched: sch_generic: Fix oops in sch_teql
dccp: Port redirection support for DCCP
tcp: Fix IPv6 fallout from 'Port redirection support for TCP'
netdev: change name dropping error codes
ipvs: Update CONFIG_IP_VS_IPV6 description and help text
(Supplements: ee999d8b95)
NFPROTO_ARP actually has a different value from NF_ARP, so ensure all
callers use the new value so that packets _do_ get delivered to the
registered hooks.
Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixes the compilation of ctnetlink when the NAT support
is not enabled.
/home/benh/kernels/linux-powerpc/net/netfilter/nf_conntrack_netlink.c:819: warning: enum nf_nat_manip_type\u2019 declared inside parameter list
/home/benh/kernels/linux-powerpc/net/netfilter/nf_conntrack_netlink.c:819: warning: its scope is only this definition or declaration, which is probably not what you want
Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reported by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Inverted IPv4 v1 and IPv6 v0 matches don't match anything since 2.6.25-rc1!
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that ctnetlink doesn't have any NAT module depenencies anymore,
we can also remove them from Kconfig.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
After these commands:
# modprobe sch_teql
# tc qdisc add dev eth0 root teql0
# tc qdisc del dev eth0 root
we get an oops in teql_destroy() when spin_lock is taken from a null
qdisc_sleeping pointer. It's because at the moment teql0 dev haven't
been activated yet, and a qdisc_root_sleeping() is pointing to noop
qdisc's netdev_queue with qdisc_sleeping uninitialized. This patch
fixes this both for noop and noqueue netdev_queues to avoid similar
problems in the future.
Signed-off-by: Jarek Poplawski <jarkao2@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit a3116ac5c2 from 1st October ("tcp: Port
redirection support for TCP") broke DCCP skb lookup by changing inet_csk_clone,
which is used by DCCP to generate the child socket after the handshake.
This patch updates DCCP to use 'loc_port' instead of 'sport', which fixes the
problem, and thus inheriting port redirection support via the new interface.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: KOVACS Krisztian <hidden@sch.bme.hu>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
'tcp: Port redirection support for TCP' (a3116ac5c) added a new member
to inet_request_sock() which inet_csk_clone() makes use of but failed
to add proper initialization to the IPv6 syncookie code and missed a
couple of places where the new member should be used instead of
inet_sk(sk)->sport.
Signed-off-by: KOVACS Krisztian <hidden@sch.bme.hu>
Signed-off-by: David S. Miller <davem@davemloft.net>
If changename notifier returns an error code, it gets incorrectly
cleared during rollback so the error is never returned to the user.
Found while testing similar code for MTU changes.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds a URL to further info to the CONFIG_IP_VS_IPV6 Kconfig help
text. Also, I think it should be ok to remove the "DANGEROUS" label in the
description line at this point to get people to try it out and find all
the bugs ;) It's still marked as experimental, of course.
Signed-off-by: Julius Volz <juliusv@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
During the reorganization some of the multi-theaded locking assumptions were
accidently relaxed. This patch moves us back towards a more conservative
locking strategy.
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
When we get an error on parsing a stat due to a protocol bug,
we can generate an oops during cleanup because we didn't
initialize the string pointers in the stat structure.
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
The new debug support lacks some of the information that the previous fcprint
code provided -- this patch focuses on better presentation of debug data along
with more helpful debug along error paths.
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Remove depricated conv functions which have been replaced with new
protocol routines.
This patch also reworks the one instance of the file-system code which
directly calls conversion routines (to accomplish unpacking dirreads).
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Now that the new protocol functions are in place, this patch switches
the client code to using the new support code.
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
One of the current debug options allows users to get a verbose dump of fcalls.
This isn't really necessary as correctly parsed protocol frames can be printed
as part of the code in the client functions. The consolidated printfcalls
structure would require new entries to be added for every extension. This
patch removes the debug print methods and their use.
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
This adds a new protocol processing support code based on Anthony Liguori's
9p library code. This code performs protocol marshalling/unmarshalling using
printf like strings to represent protocol elements. It is my intent to use
them to replace the current functions in conv.c as well as the
p9_create_* functions.
This should make the client implementation much more clear, and also make it
much easier to add new protocol extensions by limiting the number of places
in which changes need to be made.
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Alsmot all 9P client wire functions have their own (set of) functions.
Tversion is an exception as its encapsulated into the client_create code.
This patch moves the protocol specifics of this to a function to match the
rest of the code.
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Currently reading a directory is implemented in the client code.
This function is not actually a wire operation, but a meta operation
which calls read operations and processes the results.
This patch moves this functionality to the fs layer and calls component
wire operations instead of constructing their packets. This provides a
cleaner separation and will help when we reorganize the client functions
and protocol processing methods.
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
There are a couple of methods in the client code which aren't actually
wire operations. To keep things organized cleaner, these operations are
being moved to the fs layer.
This patch moves the readn meta-function (which executes multiple wire
reads until a buffer is full) to the fs layer.
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Currently there are two separate versions of read and write. One for
dealing with user buffers and the other for dealing with kernel buffers.
There is a tremendous amount of code duplication in the otherwise
identical versions of these functions. This patch adds an additional
user buffer parameter to read and write and conditionalizes handling of
the buffer on whether the kernel buffer or the user buffer is populated.
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Post p9_fd_poll() error path which checks m->poll_waddr[i] for PTR_ERR
value has the following problems.
* It's completely unused. Error value is set iff NULL @wait_address
has been specified to p9_pollwait() which is guaranteed not to
happen.
* It dereferences @m after deallocating it (introduced by 571ffeaf and
spotted by Raja R Harinath.
* It returned the wrong value on error. It should return
poll_waddr[i] but it returnes poll_waddr (introduced by 571ffeaf).
* p9_mux_poll_stop() doesn't handle PTR_ERR value. It will try to
operate on the PTR_ERR value as if it's a normal pointer and cause
oops.
As the error path is bogus in the first place, there's no reason to
hold onto it. Kill it.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Cc: Raja R Harinath <harinath@hurrynot.org>
This code moves the rpc function to the common client base,
reorganizes the flush code to be more simple and stable, and
makes the necessary adjustments to the underlying transports
to adapt to the new structure.
This reduces the overall amount of code duplication between the
transports and should make adding new transports more straightforward.
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
This patch reworks the read_work function to enable it to directly use a passed
in rcall structure. This should help allow us to remove unnecessary copies
in the future.
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
The virtio transport uses a simplified request management system
that I want to use for all transports. This patch adapts and moves the
exisiting code for managing requests to the client common code.
Later patches will apply these mechanisms to the other transports.
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
The current trans_fd rpc mechanisms use a dynamic callback mechanism which
introduces a lot of complexity which only accomodates a single special case.
This patch removes much of that complexity in favor of a simple exception
mechanism to deal with flushes.
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Currently, trans_fd has two structures (p9_req and p9_mux-rpc)
which contain mostly duplicate data.
This patch consolidates these two structures and removes p9_mux_rpc.
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Cleanup files by reordering functions in order to remove need for
unnecessary function prototypes.
There are no code changes here, just functions being moved around and
prototypes being eliminated.
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Now that we are passing client state into the transport modules, remove
duplicate state which is present in transport private structures.
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Right now there is a transport module structure which provides per-transport
type functions and data and a transport structure which contains per-instance
public data as well as function pointers to instance specific functions.
This patch moves public transport visible instance data to the client
structure (which in some cases had duplicate data) and consolidates the
functions into the transport module structure.
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
trans_fd used pool of upto 100 pollers to monitor the r/w fds. The
approach makes sense in userspace back when the only available
interfaces were poll(2) and select(2). As each event monitor -
trigger - handling iteration took O(n) where `n' is the number of
watched fds, it makes sense to spread them to many pollers such that
the `n' can be divided by the number of pollers. However, this
doesn't make any sense in kernel because persistent edge triggered
event monitoring is how the whole thing is implemented in the kernel
in the first place.
This patch converts trans_fd to use single poller which watches all
the fds instead of the poll of pollers approach. All the fds are
registered for monitoring on creation and only the fds with pending
events are scanned when something happens much like how epoll is
implemented.
This change makes trans_fd fd monitoring more efficient and simpler.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
net: Remove CONFIG_KMOD from net/ (towards removing CONFIG_KMOD entirely)
ipv4: Add a missing rcu_assign_pointer() in routing cache.
[netdrvr] ibmtr: PCMCIA IBMTR is ok on 64bit
xen-netfront: Avoid unaligned accesses to IP header
lmc: copy_*_user under spinlock
[netdrvr] myri10ge, ixgbe: remove broken select INTEL_IOATDMA
* git://git.linux-nfs.org/projects/trondmy/nfs-2.6: (53 commits)
NFS: Fix a resolution problem with nfs_inode->cache_change_attribute
NFS: Fix the resolution problem with nfs_inode_attrs_need_update()
NFS: Changes to inode->i_nlinks must set the NFS_INO_INVALID_ATTR flag
RPC/RDMA: ensure connection attempt is complete before signalling.
RPC/RDMA: correct the reconnect timer backoff
RPC/RDMA: optionally emit useful transport info upon connect/disconnect.
RPC/RDMA: reformat a debug printk to keep lines together.
RPC/RDMA: harden connection logic against missing/late rdma_cm upcalls.
RPC/RDMA: fix connect/reconnect resource leak.
RPC/RDMA: return a consistent error, when connect fails.
RPC/RDMA: adhere to protocol for unpadded client trailing write chunks.
RPC/RDMA: avoid an oops due to disconnect racing with async upcalls.
RPC/RDMA: maintain the RPC task bytes-sent statistic.
RPC/RDMA: suppress retransmit on RPC/RDMA clients.
RPC/RDMA: fix connection IRD/ORD setting
RPC/RDMA: support FRMR client memory registration.
RPC/RDMA: check selected memory registration mode at runtime.
RPC/RDMA: add data types and new FRMR memory registration enum.
RPC/RDMA: refactor the inline memory registration code.
NFS: fix nfs_parse_ip_address() corner case
...
Some code here depends on CONFIG_KMOD to not try to load
protocol modules or similar, replace by CONFIG_MODULES
where more than just request_module depends on CONFIG_KMOD
and and also use try_then_request_module in ebtables.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
rt_intern_hash() is doing an update of a RCU guarded hash chain
without using rcu_assign_pointer() or equivalent barrier.
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (46 commits)
UIO: Fix mapping of logical and virtual memory
UIO: add automata sercos3 pci card support
UIO: Change driver name of uio_pdrv
UIO: Add alignment warnings for uio-mem
Driver core: add bus_sort_breadthfirst() function
NET: convert the phy_device file to use bus_find_device_by_name
kobject: Cleanup kobject_rename and !CONFIG_SYSFS
kobject: Fix kobject_rename and !CONFIG_SYSFS
sysfs: Make dir and name args to sysfs_notify() const
platform: add new device registration helper
sysfs: use ilookup5() instead of ilookup5_nowait()
PNP: create device attributes via default device attributes
Driver core: make bus_find_device_by_name() more robust
usb: turn dev_warn+WARN_ON combos into dev_WARN
debug: use dev_WARN() rather than WARN_ON() in device_pm_add()
debug: Introduce a dev_WARN() function
sysfs: fix deadlock
device model: Do a quickcheck for driver binding before doing an expensive check
Driver core: Fix cleanup in device_create_vargs().
Driver core: Clarify device cleanup.
...
name and nlen parameters passed to ->strategy hook are unused, remove
them. In general ->strategy hook should know what it's doing, and don't
do something tricky for which, say, pointer to original userspace array
may be needed (name).
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net> [ networking bits ]
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Danny ter Haar <dth@cistron.nl>
Cc: Patrick McHardy <kaber@trash.net>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Avi Kivity <avi@qumranet.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Base infrastructure to enable per-module debug messages.
I've introduced CONFIG_DYNAMIC_PRINTK_DEBUG, which when enabled centralizes
control of debugging statements on a per-module basis in one /proc file,
currently, <debugfs>/dynamic_printk/modules. When, CONFIG_DYNAMIC_PRINTK_DEBUG,
is not set, debugging statements can still be enabled as before, often by
defining 'DEBUG' for the proper compilation unit. Thus, this patch set has no
affect when CONFIG_DYNAMIC_PRINTK_DEBUG is not set.
The infrastructure currently ties into all pr_debug() and dev_dbg() calls. That
is, if CONFIG_DYNAMIC_PRINTK_DEBUG is set, all pr_debug() and dev_dbg() calls
can be dynamically enabled/disabled on a per-module basis.
Future plans include extending this functionality to subsystems, that define
their own debug levels and flags.
Usage:
Dynamic debugging is controlled by the debugfs file,
<debugfs>/dynamic_printk/modules. This file contains a list of the modules that
can be enabled. The format of the file is as follows:
<module_name> <enabled=0/1>
.
.
.
<module_name> : Name of the module in which the debug call resides
<enabled=0/1> : whether the messages are enabled or not
For example:
snd_hda_intel enabled=0
fixup enabled=1
driver enabled=0
Enable a module:
$echo "set enabled=1 <module_name>" > dynamic_printk/modules
Disable a module:
$echo "set enabled=0 <module_name>" > dynamic_printk/modules
Enable all modules:
$echo "set enabled=1 all" > dynamic_printk/modules
Disable all modules:
$echo "set enabled=0 all" > dynamic_printk/modules
Finally, passing "dynamic_printk" at the command line enables
debugging for all modules. This mode can be turned off via the above
disable command.
[gkh: minor cleanups and tweaks to make the build work quietly]
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Use offsetof() instead of home-brewed version.
Based upon initial patch by Steven Whitehouse and suggestions
by Ben Hutchings.
Signed-off-by: David S. Miller <davem@davemloft.net>
Problem observed:
In IPv6, in the presence of multiple routers candidates to
default gateway in one segment, each sending a different
value of preference, the Linux hosts connected to the
segment weren't selecting the right one in all the
combinations possible of LOW/MEDIUM/HIGH preference.
This patch changes two files:
include/linux/icmpv6.h
Get the "router_pref" bitfield in the right place
(as RFC4191 says), named the bit left with this fix as
"home_agent" (RFC3775 say that's his function)
net/ipv6/ndisc.c
Corrects the binary logic behind the updating of the
router preference in the flags of the routing table
Result:
With this two fixes applied, the default route used by
the system was to consistent with the rules mentioned
in RFC4191 in case of changes in the value of preference
in router advertisements
Signed-off-by: Pedro Ribeiro <pribeiro@net.ipl.pt>
Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
As I've reported, ath9k currently fails utterly when fragmentation
is enabled. This makes ath9k "support" hardware fragmentation by
not supporting fragmentation at all to avoid the double-free issue.
The patch also changes mac80211 to report errors from the driver
operation to userspace.
That hack in ath9k should be removed once the rate control algorithm
it has is fixed, and we can at that time consider removing the hw
fragmentation support entirely since it's not used by any driver.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Cc: stable@kernel.org
Acked-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
ieee80211_bss_info_update() can return NULL. Verify that this is not the
case before calling ieee802111_rx_bss_put() which would trigger an oops
in interrupt context in atomic_dec_and_lock().
Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Benoit Papillault <benoit.papillault@free.fr>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
If something goes wrong creating the debugfs dir or when
debugfs is not compiled in, the current code might lead to
trouble; make it more robust.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
If, for some reason, a netdev has no debugfs dir, we shouldn't
try to rename that dir.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Cc: Robin Holt <holt@sgi.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
There's no checking that the HT IEs are of the right length
which can be used by an attacker to cause an out-of-bounds
access by sending a too short HT information/capability IE.
Fix it by simply pretending those IEs didn't exist when too
short.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
When debugfs_create_dir fails, sta_info_debugfs_add_work will not
terminate because it will find the same station again and again.
This is possible whenever debugfs fails for whatever reason; one
reason is a race condition in mac80211, unfortunately we cannot
do much about it, so just document it, it just means some station
may be missing from debugfs.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Cc: Robin Holt <holt@sgi.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (55 commits)
HID: build drivers for all quirky devices by default
HID: add missing blacklist entry for Apple ATV ircontrol
HID: add support for Bright ABNT2 brazilian device
HID: Don't let Avermedia Radio FM800 be handled by usb hid drivers
HID: fix numlock led on Dell device 0x413c/0x2105
HID: remove warn() macro from usb hid drivers
HID: remove info() macro from usb HID drivers
HID: add appletv IR receiver quirk
HID: fix a lockup regression when using force feedback on a PID device
HID: hiddev.h: Fix example code.
HID: hiddev.h: Fix mixed space and tabs in example code.
HID: convert to dev_* prints
HID: remove hid-ff
HID: move zeroplus FF processing
HID: move thrustmaster FF processing
HID: move pantherlord FF processing
HID: fix incorrent length condition in hidraw_write()
HID: fix tty<->hid deadlock
HID: ignore iBuddy devices
HID: report descriptor fix for remaining MacBook JIS keyboards
...
Move connecting from usbhid to the hid layer and fix also hidp in
that manner.
This removes all the ignore/force hidinput/hiddev connecting quirks.
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Move ignore quirks from usbhid-quirks into hid-core code. Also don't output
warning when ENODEV is error code in usbhid and try ordinal input in hidp
when that error is returned.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Next step for complete hid bus, this patch includes:
- call parser either from probe or from hid-core if there is no probe.
- add ll_driver structure and centralize some stuff there (open, close...)
- split and merge usb_hid_configure and hid_probe into several functions
to allow hooks/fixes between them
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Make a bus from hid core. This is the first step for converting all the
quirks and separate almost-drivers into real drivers attached to this bus.
It's implemented to change behaviour in very tiny manner, so that no driver
needs to be changed this time.
Also add generic drivers for both usb and bt into usbhid or hidp
respectively which will bind all non-blacklisted device. Those blacklisted
will be either grabbed by special drivers or by nobody if they are broken at
the very rude base.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* 'for-2.6.28' of git://linux-nfs.org/~bfields/linux: (59 commits)
svcrdma: Fix IRD/ORD polarity
svcrdma: Update svc_rdma_send_error to use DMA LKEY
svcrdma: Modify the RPC reply path to use FRMR when available
svcrdma: Modify the RPC recv path to use FRMR when available
svcrdma: Add support to svc_rdma_send to handle chained WR
svcrdma: Modify post recv path to use local dma key
svcrdma: Add a service to register a Fast Reg MR with the device
svcrdma: Query device for Fast Reg support during connection setup
svcrdma: Add FRMR get/put services
NLM: Remove unused argument from svc_addsock() function
NLM: Remove "proto" argument from lockd_up()
NLM: Always start both UDP and TCP listeners
lockd: Remove unused fields in the nlm_reboot structure
lockd: Add helper to sanity check incoming NOTIFY requests
lockd: change nlmclnt_grant() to take a "struct sockaddr *"
lockd: Adjust nlmsvc_lookup_host() to accomodate AF_INET6 addresses
lockd: Adjust nlmclnt_lookup_host() signature to accomodate non-AF_INET
lockd: Support non-AF_INET addresses in nlm_lookup_host()
NLM: Convert nlm_lookup_host() to use a single argument
svcrdma: Add Fast Reg MR Data Types
...
This patch removes the module dependency between ctnetlink and
nf_nat by means of an indirect call that is initialized when
nf_nat is loaded. Now, nf_conntrack_netlink only requires
nf_conntrack and nfnetlink.
This patch puts nfnetlink_parse_nat_setup_hook into the
nf_conntrack_core to avoid dependencies between ctnetlink,
nf_conntrack_ipv4 and nf_conntrack_ipv6.
This patch also introduces the function ctnetlink_change_nat
that is only invoked from the creation path. Actually, the
nat handling cannot be invoked from the update path since
this is not allowed. By introducing this function, we remove
the useless nat handling in the update path and we avoid
deadlock-prone code.
This patch also adds the required EAGAIN logic for nfnetlink.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nir Tzachar <nir.tzachar@gmail.com> reported a warning when sending
fragments over loopback with NAT:
[ 6658.338121] WARNING: at net/ipv4/netfilter/nf_nat_standalone.c:89 nf_nat_fn+0x33/0x155()
The reason is that defragmentation is skipped for already tracked connections.
This is wrong in combination with NAT and ip_conntrack actually had some ifdefs
to avoid this behaviour when NAT is compiled in.
The entire "optimization" may seem a bit silly, for now simply restoring the
lost #ifdef is the easiest solution until we can come up with something better.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
For some m68k configs, I get:
| net/rfkill/rfkill-input.c: In function 'rfkill_start':
| net/rfkill/rfkill-input.c:208: error: dereferencing pointer to incomplete type
As the incomplete type is `struct task_struct', including <linux/sched.h> fixes
it.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Clean up the various different email addresses of mine listed in the code
to a single current and valid address. As Dave says his network merges
for 2.6.28 are now done this seems a good point to send them in where
they won't risk disrupting real changes.
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
git commit 45cec1bac0
"dsa: Need to select PHYLIB." causes this build bug on s390:
drivers/built-in.o: In function `phy_stop_interrupts':
/home/heicarst/linux-2.6/drivers/net/phy/phy.c:631: undefined reference to `free_irq'
/home/heicarst/linux-2.6/drivers/net/phy/phy.c:646: undefined reference to `enable_irq'
drivers/built-in.o: In function `phy_start_interrupts':
/home/heicarst/linux-2.6/drivers/net/phy/phy.c:601: undefined reference to `request_irq'
drivers/built-in.o: In function `phy_interrupt':
/home/heicarst/linux-2.6/drivers/net/phy/phy.c:528: undefined reference to `disable_irq_nosync'
drivers/built-in.o: In function `phy_change':
/home/heicarst/linux-2.6/drivers/net/phy/phy.c:674: undefined reference to `enable_irq'
/home/heicarst/linux-2.6/drivers/net/phy/phy.c:692: undefined reference to `disable_irq'
PHYLIB has alread a depend on !S390, however select PHYLIB at DSA overrides
that unfortunately. So add a depend on !S390 to DSA as well.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
LD net/ipv6/ipv6.o
WARNING: net/ipv6/ipv6.o(.text+0xd8): Section mismatch in reference from the function inet6_net_init() to the function .init.text:ipv6_init_mibs()
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Seems that skb goes into void unless something magic happened
in pskb_expand_head in case of failure.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is a much better version of a previous patch to make the parser
tables constant. Rather than changing the typedef, we put the "const" in
all the various places where its required, allowing the __initconst
exception for nfsroot which was the cause of the previous trouble.
This was posted for review some time ago and I believe its been in -mm
since then.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Alexander Viro <aviro@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
older versions of gcc do not recognize that ieee80211_rx_h_mesh_fwding()
is unused when CONFIG_MAC80211_MESH is disabled:
net/built-in.o: In function `ieee80211_rx_h_mesh_fwding':
rx.c:(.text+0xd89af): undefined reference to `mpp_path_lookup'
rx.c:(.text+0xd89c6): undefined reference to `mpp_path_add'
as this code construct:
if (ieee80211_vif_is_mesh(&sdata->vif))
CALL_RXH(ieee80211_rx_h_mesh_fwding);
still causes ieee80211_rx_h_mesh_fwding() to be linked in.
Protect these places with an #ifdef.
commit b0dee578 ("Fix modpost failure when rx handlers are not inlined.")
solved part of this problem - this patch is still needed.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: David S. Miller <davem@davemloft.net>
The file(s) below do not use LINUX_VERSION_CODE nor KERNEL_VERSION.
net/netfilter/nf_tproxy_core.c
This patch removes the said #include <version.h>.
Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The unwind loop iterates down to -1 instead of stopping at 0 and ends up
accessing ->frags[-1].
Signed-off-by: Dimitris Michailidis <dm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Removed duplicated include <linux/list.h> in
net/wireless/core.c.
Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Brown paper bag error of calling memset with sizeof(p) instead
of sizeof(*p).
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus noted a build failure case:
net/netfilter/ipvs/ip_vs_xmit.c: In function 'ip_vs_tunnel_xmit':
net/netfilter/ipvs/ip_vs_xmit.c:616: error: implicit declaration of function 'ip_select_ident'
The proper include file (net/ip.h) is being included in ip_vs_xmit.c to get
that declaration. So the only possible case where this can happen is if
CONFIG_INET is not enabled.
This seems to be purely a missing dependency in the ipvs/Kconfig file IP_VS
entry.
Also, while we're here, remove the out of date "EXPERIMENTAL" string in the
IP_VS config help header line. IP_VS no longer depends upon CONFIG_EXPERIMENTAL
Signed-off-by: David S. Miller <davem@davemloft.net>
When deleting an SPD entry using SADB_X_SPDDELETE, c.data.byid is not
initialized to zero in pfkey_spddelete(). Thus, key_notify_policy()
responds with a PF_KEY message of type SADB_X_SPDDELETE2 instead of
SADB_X_SPDDELETE.
Signed-off-by: Tobias Brunner <tobias.brunner@strongswan.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The RPC/RDMA connection logic could return early from reconnection
attempts, leading to additional spurious retries.
Signed-off-by: Tom Talpey <talpey@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The RPC/RDMA code had a constant 5-second reconnect backoff, and
always performed it, even when re-establishing a connection to a
server after the RPC layer closed it due to being idle. Make it
an geometric backoff (up to 30 seconds), and don't delay idle
reconnect.
Signed-off-by: Tom Talpey <talpey@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The send marshaling code split a particular dprintk across two
lines, which makes it hard to extract from logfiles.
Signed-off-by: Tom Talpey <talpey@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Add defensive timeouts to wait_for_completion() calls in RDMA
address resolution, and make them interruptible. Fix the timeout
units to milliseconds (formerly jiffies) and move to private header.
Signed-off-by: Tom Talpey <talpey@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The RPC/RDMA code can leak RDMA connection manager endpoints in
certain error cases on connect. Don't signal unwanted events,
and be certain to destroy any allocated qp.
Signed-off-by: Tom Talpey <talpey@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The xprt_connect call path does not expect such errors as ECONNREFUSED
to be returned from failed transport connection attempts, otherwise it
translates them to EIO and signals fatal errors. For example, mount.nfs
prints simply "internal error". Translate all such errors to ENOTCONN
from RPC/RDMA to match sockets behavior.
Signed-off-by: Tom Talpey <talpey@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The RPC/RDMA protocol allows clients and servers to avoid RDMA
operations for data which is purely the result of XDR padding.
On the client, automatically insert the necessary padding for
such server replies, and optionally don't marshal such chunks.
Signed-off-by: Tom Talpey <talpey@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
RDMA disconnects yield an upcall from the RDMA connection manager,
which can race with rpc transport close, e.g. on ^C of a mount.
Ensure any rdma cm_id and qp are fully destroyed before continuing.
Signed-off-by: Tom Talpey <talpey@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
- use typeful helpers for IFLA_GRE_LOCAL/IFLA_GRE_REMOTE
- replace magic value by FIELD_SIZEOF
- use MODULE_ALIAS_RTNL_LINK macro
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
An RPC/RDMA client cannot retransmit on an unbroken connection,
doing so violates its flow control with the server.
Signed-off-by: Tom Talpey <talpey@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This logic sets the connection parameter that configures the local device
and informs the remote peer how many concurrent incoming RDMA_READ
requests are supported. The original logic didn't really do what was
intended for two reasons:
- The max number supported by the device is typically smaller than
any one factor in the calculation used, and
- The field in the connection parameter structure where the value is
stored is a u8 and always overflows for the default settings.
So what really happens is the value requested for responder resources
is the left over 8 bits from the "desired value". If the desired value
happened to be a multiple of 256, the result was zero and it wouldn't
connect at all.
Given the above and the fact that max_requests is almost always larger
than the max responder resources supported by the adapter, this patch
simplifies this logic and simply requests the max supported by the device,
subject to a reasonable limit.
This bug was found by Jim Schutt at Sandia.
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Acked-by: Tom Talpey <talpey@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Configure, detect and use "fastreg" support from IB/iWARP verbs
layer to perform RPC/RDMA memory registration.
Make FRMR the default memreg mode (will fall back if not supported
by the selected RDMA adapter).
This allows full and optimal operation over the cxgb3 adapter, and others.
Signed-off-by: Tom Talpey <talpey@netapp.com>
Acked-by: Tom Tucker <tom@opengridcomputing.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
At transport creation, check for, and use, any local dma lkey.
Then, check that the selected memory registration mode is in fact
supported by the RDMA adapter selected for the mount. Fall back
to best alternative if not.
Signed-off-by: Tom Talpey <talpey@netapp.com>
Acked-by: Tom Tucker <tom@opengridcomputing.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Refactor the memory registration and deregistration routines.
This saves stack space, makes the code more readable and prepares
to add the new FRMR registration methods.
Signed-off-by: Tom Talpey <talpey@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Add the necessary NetLabel support for the new CIPSO mapping,
CIPSO_V4_MAP_LOCAL, which allows full LSM label/context support.
Signed-off-by: Paul Moore <paul.moore@hp.com>
Reviewed-by: James Morris <jmorris@namei.org>
This patch accomplishes three minor tasks: add a new tag type for local
labeling, rename the CIPSO_V4_MAP_STD define to CIPSO_V4_MAP_TRANS and
replace some of the CIPSO "magic numbers" with constants from the header
file. The first change allows CIPSO to support full LSM labels/contexts,
not just MLS attributes. The second change brings the mapping names inline
with what userspace is using, compatibility is preserved since we don't
actually change the value. The last change is to aid readability and help
prevent mistakes.
Signed-off-by: Paul Moore <paul.moore@hp.com>
Previous work enabled the use of address based NetLabel selectors, which while
highly useful, brought the potential for additional per-packet overhead when
used. This patch attempts to solve that by applying NetLabel socket labels
when sockets are connect()'d. This should alleviate the per-packet NetLabel
labeling for all connected sockets (yes, it even works for connected DGRAM
sockets).
Signed-off-by: Paul Moore <paul.moore@hp.com>
Reviewed-by: James Morris <jmorris@namei.org>
This patch builds upon the new NetLabel address selector functionality by
providing the NetLabel KAPI and CIPSO engine support needed to enable the
new packet-based labeling. The only new addition to the NetLabel KAPI at
this point is shown below:
* int netlbl_skbuff_setattr(skb, family, secattr)
... and is designed to be called from a Netfilter hook after the packet's
IP header has been populated such as in the FORWARD or LOCAL_OUT hooks.
This patch also provides the necessary SELinux hooks to support this new
functionality. Smack support is not currently included due to uncertainty
regarding the permissions needed to expand the Smack network access controls.
Signed-off-by: Paul Moore <paul.moore@hp.com>
Reviewed-by: James Morris <jmorris@namei.org>
This patch extends the NetLabel traffic labeling capabilities to individual
packets based not only on the LSM domain but the by the destination address
as well. The changes here only affect the core NetLabel infrastructre,
changes to the NetLabel KAPI and individial protocol engines are also
required but are split out into a different patch to ease review.
Signed-off-by: Paul Moore <paul.moore@hp.com>
Reviewed-by: James Morris <jmorris@namei.org>
Create an ordered IP address linked list mechanism similar to the core
kernel's linked list construct. The idea behind this list functionality
is to create an extensibile linked list ordered by IP address mask to
ease the matching of network addresses. The linked list is ordered with
larger address masks at the front of the list and shorter address masks
at the end to facilitate overriding network entries with individual host
or subnet entries.
Signed-off-by: Paul Moore <paul.moore@hp.com>
Reviewed-by: James Morris <jmorris@namei.org>
NetLabel has always had a list of backpointers in the CIPSO DOI definition
structure which pointed to the NetLabel LSM domain mapping structures which
referenced the CIPSO DOI struct. The rationale for this was that when an
administrator removed a CIPSO DOI from the system all of the associated
NetLabel LSM domain mappings should be removed as well; a list of
backpointers made this a simple operation.
Unfortunately, while the backpointers did make the removal easier they were
a bit of a mess from an implementation point of view which was making
further development difficult. Since the removal of a CIPSO DOI is a
realtively rare event it seems to make sense to remove this backpointer
list as the optimization was hurting us more then it was helping. However,
we still need to be able to track when a CIPSO DOI definition is being used
so replace the backpointer list with a reference count. In order to
preserve the current functionality of removing the associated LSM domain
mappings when a CIPSO DOI is removed we walk the LSM domain mapping table,
removing the relevant entries.
Signed-off-by: Paul Moore <paul.moore@hp.com>
Reviewed-by: James Morris <jmorris@namei.org>
At some point I think I messed up and dropped the calls to netlbl_skbuff_err()
which are necessary for CIPSO to send error notifications to remote systems.
This patch re-introduces the error handling calls into the SELinux code.
Signed-off-by: Paul Moore <paul.moore@hp.com>
Acked-by: James Morris <jmorris@namei.org>
After some discussions with the Smack folks, well just Casey, I now have a
better idea of what Smack wants out of NetLabel in the future so I think it
is now safe to do some API "pruning". If another LSM comes along that
needs this functionality we can always add it back in, but I don't see any
LSMs on the horizon which might make use of these functions.
Thanks to Rami Rosen who suggested removing netlbl_cfg_cipsov4_del() back
in February 2008.
Signed-off-by: Paul Moore <paul.moore@hp.com>
Reviewed-by: James Morris <jmorris@namei.org>
Fix a few sparse warnings. One dealt with a RCU lock being held on error,
another dealt with an improper type caused by a signed/unsigned mixup while
the rest appeared to be caused by using rcu_dereference() in a
list_for_each_entry_rcu() call. The latter probably isn't a big deal, but
I derive a certain pleasure from knowing that the net/netlabel is nice and
clean.
Thanks to James Morris for pointing out the issues and demonstrating how
to run sparse.
Signed-off-by: Paul Moore <paul.moore@hp.com>
This patch fix error with CONFIG_TCP_MD5SIG disabled.
Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
While looking at UDP port randomization, I noticed it
was litle bit pessimistic, not looking at type of sockets
(IPV6/IPV4) and not looking at bound addresses if any.
We should perform same tests than when binding to a
specific port.
This permits a cleanup of udp_lib_get_port()
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
$ codiff tcp_ipv6.o.old tcp_ipv6.o.new
net/ipv6/tcp_ipv6.c:
tcp_v6_md5_hash_hdr | -144
tcp_v6_send_ack | -585
tcp_v6_send_reset | -540
3 functions changed, 1269 bytes removed, diff: -1269
net/ipv6/tcp_ipv6.c:
tcp_v6_send_response | +791
1 function changed, 791 bytes added, diff: +791
tcp_ipv6.o.new:
4 functions changed, 791 bytes added, 1269 bytes removed, diff: -478
I choose to leave the reset related netns comment in place (not
the one that is killed) as I cannot understand its English so
it's a bit hard for me to evaluate its usefulness :-).
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
Maybe it's just me but I guess those md5 people made a mess
out of it by having *_md5_hash_* to use daddr, saddr order
instead of the one that is natural (and equal to what csum
functions use). For the segment were sending, the original
addresses are reversed so buff's saddr == skb's daddr and
vice-versa.
Maybe I can finally proceed with unification of some code
after fixing it first... :-)
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
The T5 timer is the timer for the over-all shutdown procedure. If
this timer expires, then shutdown procedure has not completed and we
ABORT the association. We should update SCTP_MIB_ABORTED and
SCTP_MIB_CURRESTAB when aborting.
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If ABORT chunks require authentication and a protocol violation
is triggered, we do not tear down the association. Subsequently,
we should not increment SCTP_MIB_ABORTED.
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
RFC3873 defined SCTP_MIB_CURRESTAB:
sctpCurrEstab OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of associations for which the current state is
either ESTABLISHED, SHUTDOWN-RECEIVED or SHUTDOWN-PENDING."
REFERENCE
"Section 4 in RFC2960 covers the SCTP Association state
diagram."
If the T4 RTO timer expires many times(timeout), the association will enter
CLOSED state, so we should dec the number of SCTP_MIB_CURRESTAB, not inc the
number of SCTP_MIB_CURRESTAB.
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch makes the RX/TX byte counters for IPIP, GRE and SIT more
consistent. Previously we included the external IP headers on the
way out but not when the packet is inbound.
The new scheme is to count payload only in both directions. For
IPIP and SIT this simply means the exclusion of the external IP
header. For GRE this means that we exclude the GRE header as
well.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds support for Ethernet over GRE encapsulation.
This is exposed to user-space with a new link type of "gretap"
instead of "gre". It will create an ARPHRD_ETHER device in
lieu of the usual ARPHRD_IPGRE.
Note that to preserver backwards compatibility all Transparent
Ethernet Bridging packets are passed to an ARPHRD_IPGRE tunnel
if its key matches and there is no ARPHRD_ETHER device whose
key matches more closely.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds a netlink interface that will eventually displace
the existing ioctl interface. It utilises the elegant rtnl_link_ops
mechanism.
This also means that user-space no longer needs to rely on the
tunnel interface being of type GRE to identify GRE tunnels. The
identification can now occur using rtnl_link_ops.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
