The earlier commit to remove hfs_writepage only removed it from one of the
aops. Remove it from the btree_aops as well.
Link: https://lkml.kernel.org/r/20231215200245.748418-8-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
If the filesystem implements migrate_folio and writepages, there is no
need for a writepage implementation.
Link: https://lkml.kernel.org/r/20231215200245.748418-7-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
If the filesystem implements migrate_folio and writepages, there is no
need for a writepage implementation.
Link: https://lkml.kernel.org/r/20231215200245.748418-6-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Some architectures support a very large PAGE_SIZE, so instead of the 8
pointers we see with a 4kB PAGE_SIZE, we can see 128 pointers with 64kB or
so many on Hexagon that it trips compiler warnings about exceeding stack
frame size.
All we're doing with this array is checking for block contiguity, which we
can as well do by remembering the address of the first block in the page
and checking this block is at the appropriate offset from that address.
Link: https://lkml.kernel.org/r/20231215200245.748418-5-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Some architectures support a very large PAGE_SIZE, so instead of the 8
pointers we see with a 4kB PAGE_SIZE, we can see 128 pointers with 64kB or
so many on Hexagon that it trips compiler warnings about exceeding stack
frame size.
All we're doing with this array is checking for block contiguity, which we
can as well do by remembering the address of the first block in the page
and checking this block is at the appropriate offset from that address.
Link: https://lkml.kernel.org/r/20231215200245.748418-4-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The only caller already has a folio, so pass it in and use it throughout.
Saves two calls to compound_head().
Link: https://lkml.kernel.org/r/20231215200245.748418-3-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Clean up the writeback paths".
Most of these patches verge on the trivial, converting filesystems that
just use block_write_full_page() to use mpage_writepages(). But as we saw
with Christoph's earlier patchset, there can be some "interesting"
gotchas, and I clearly haven't tested the majority of filesystems I've
touched here.
Patches 3 & 4 get rid of a lot of stack usage on architectures with larger
page sizes; 1024 bytes on 64-bit systems with 64KiB pages. It starts to
open the door to larger folio sizes on all architectures, but it's
certainly not enough yet.
Patch 14 is kind of trivial, but it's nice to get that simplification in.
This patch (of 14):
This function has been unused since the removal of bdev_write_page().
Link: https://lkml.kernel.org/r/20231215200245.748418-1-willy@infradead.org
Link: https://lkml.kernel.org/r/20231215200245.748418-2-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Implement the uABI of UFFDIO_MOVE ioctl.
UFFDIO_COPY performs ~20% better than UFFDIO_MOVE when the application
needs pages to be allocated [1]. However, with UFFDIO_MOVE, if pages are
available (in userspace) for recycling, as is usually the case in heap
compaction algorithms, then we can avoid the page allocation and memcpy
(done by UFFDIO_COPY). Also, since the pages are recycled in the
userspace, we avoid the need to release (via madvise) the pages back to
the kernel [2].
We see over 40% reduction (on a Google pixel 6 device) in the compacting
thread's completion time by using UFFDIO_MOVE vs. UFFDIO_COPY. This was
measured using a benchmark that emulates a heap compaction implementation
using userfaultfd (to allow concurrent accesses by application threads).
More details of the usecase are explained in [2]. Furthermore,
UFFDIO_MOVE enables moving swapped-out pages without touching them within
the same vma. Today, it can only be done by mremap, however it forces
splitting the vma.
[1] https://lore.kernel.org/all/1425575884-2574-1-git-send-email-aarcange@redhat.com/
[2] https://lore.kernel.org/linux-mm/CA+EESO4uO84SSnBhArH4HvLNhaUQ5nZKNKXqxRCyjniNVjp0Aw@mail.gmail.com/
Update for the ioctl_userfaultfd(2) manpage:
UFFDIO_MOVE
(Since Linux xxx) Move a continuous memory chunk into the
userfault registered range and optionally wake up the blocked
thread. The source and destination addresses and the number of
bytes to move are specified by the src, dst, and len fields of
the uffdio_move structure pointed to by argp:
struct uffdio_move {
__u64 dst; /* Destination of move */
__u64 src; /* Source of move */
__u64 len; /* Number of bytes to move */
__u64 mode; /* Flags controlling behavior of move */
__s64 move; /* Number of bytes moved, or negated error */
};
The following value may be bitwise ORed in mode to change the
behavior of the UFFDIO_MOVE operation:
UFFDIO_MOVE_MODE_DONTWAKE
Do not wake up the thread that waits for page-fault
resolution
UFFDIO_MOVE_MODE_ALLOW_SRC_HOLES
Allow holes in the source virtual range that is being moved.
When not specified, the holes will result in ENOENT error.
When specified, the holes will be accounted as successfully
moved memory. This is mostly useful to move hugepage aligned
virtual regions without knowing if there are transparent
hugepages in the regions or not, but preventing the risk of
having to split the hugepage during the operation.
The move field is used by the kernel to return the number of
bytes that was actually moved, or an error (a negated errno-
style value). If the value returned in move doesn't match the
value that was specified in len, the operation fails with the
error EAGAIN. The move field is output-only; it is not read by
the UFFDIO_MOVE operation.
The operation may fail for various reasons. Usually, remapping of
pages that are not exclusive to the given process fail; once KSM
might deduplicate pages or fork() COW-shares pages during fork()
with child processes, they are no longer exclusive. Further, the
kernel might only perform lightweight checks for detecting whether
the pages are exclusive, and return -EBUSY in case that check fails.
To make the operation more likely to succeed, KSM should be
disabled, fork() should be avoided or MADV_DONTFORK should be
configured for the source VMA before fork().
This ioctl(2) operation returns 0 on success. In this case, the
entire area was moved. On error, -1 is returned and errno is
set to indicate the error. Possible errors include:
EAGAIN The number of bytes moved (i.e., the value returned in
the move field) does not equal the value that was
specified in the len field.
EINVAL Either dst or len was not a multiple of the system page
size, or the range specified by src and len or dst and len
was invalid.
EINVAL An invalid bit was specified in the mode field.
ENOENT
The source virtual memory range has unmapped holes and
UFFDIO_MOVE_MODE_ALLOW_SRC_HOLES is not set.
EEXIST
The destination virtual memory range is fully or partially
mapped.
EBUSY
The pages in the source virtual memory range are either
pinned or not exclusive to the process. The kernel might
only perform lightweight checks for detecting whether the
pages are exclusive. To make the operation more likely to
succeed, KSM should be disabled, fork() should be avoided
or MADV_DONTFORK should be configured for the source virtual
memory area before fork().
ENOMEM Allocating memory needed for the operation failed.
ESRCH
The target process has exited at the time of a UFFDIO_MOVE
operation.
Link: https://lkml.kernel.org/r/20231206103702.3873743-3-surenb@google.com
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Nicolas Geoffray <ngeoffray@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: ZhangPeng <zhangpeng362@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Both __block_write_full_folio() and block_read_full_folio() assumed that
block size <= PAGE_SIZE. Replace the shift with a divide, which is
probably cheaper than first calculating the shift. That lets us remove
block_size_bits() as these were the last callers.
Link: https://lkml.kernel.org/r/20231109210608.2252323-8-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Cc: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When __block_write_begin_int() was converted to support folios, we did not
expect large folios to be passed to it. With the current work to support
large block size storage devices, this will no longer be true so change
the checks on 'from' and 'to' to be related to the size of the folio
instead of PAGE_SIZE. Also remove an assumption that the block size is
smaller than PAGE_SIZE.
Link: https://lkml.kernel.org/r/20231109210608.2252323-7-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reported-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
If i_blkbits is larger than PAGE_SHIFT, we shift by a negative number,
which is undefined. It is safe to shift the block left as a block device
must be smaller than MAX_LFS_FILESIZE, which is guaranteed to fit in
loff_t.
Link: https://lkml.kernel.org/r/20231109210608.2252323-6-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Pankaj Raghav <p.raghav@samsung.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
While sector_t is always defined as a u64 today, that hasn't always been
the case and it might not always be the same size as loff_t in the future.
Link: https://lkml.kernel.org/r/20231109210608.2252323-5-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Cc: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We must not shift by a negative number so work in terms of a byte offset
to avoid the awkward shift left-or-right-depending-on-sign option. This
means we need to use check_mul_overflow() to ensure that a large block
number does not result in a wrap.
Link: https://lkml.kernel.org/r/20231109210608.2252323-4-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Cc: Ryusuke Konishi <konishi.ryusuke@gmail.com>
[nathan@kernel.org: add cast in grow_buffers() to avoid a multiplication libcall]
Link: https://lkml.kernel.org/r/20231128-avoid-muloti4-grow_buffers-v1-1-bc3d0f0ec483@kernel.org
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The calculation of block from index doesn't work for devices with a block
size larger than PAGE_SIZE as we end up shifting by a negative number.
Instead, calculate the number of the first block from the folio's position
in the block device. We no longer need to pass sizebits to
grow_dev_folio().
Link: https://lkml.kernel.org/r/20231109210608.2252323-3-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Pankaj Raghav <p.raghav@samsung.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "More buffer_head cleanups", v2.
The first patch is a left-over from last cycle. The rest fix "obvious"
block size > PAGE_SIZE problems. I haven't tested with a large block size
setup (but I have done an ext4 xfstests run).
This patch (of 7):
Rename grow_dev_page() to grow_dev_folio() and make it return a bool.
Document what that bool means; it's more subtle than it first appears.
Also rename the 'failed' label to 'unlock' beacuse it's not exactly
'failed'. It just hasn't succeeded.
Link: https://lkml.kernel.org/r/20231109210608.2252323-2-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Cc: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In preparation for adding support for anonymous multi-size THP, introduce
new sysfs structure that will be used to control the new behaviours. A
new directory is added under transparent_hugepage for each supported THP
size, and contains an `enabled` file, which can be set to "inherit" (to
inherit the global setting), "always", "madvise" or "never". For now, the
kernel still only supports PMD-sized anonymous THP, so only 1 directory is
populated.
The first half of the change converts transhuge_vma_suitable() and
hugepage_vma_check() so that they take a bitfield of orders for which the
user wants to determine support, and the functions filter out all the
orders that can't be supported, given the current sysfs configuration and
the VMA dimensions. The resulting functions are renamed to
thp_vma_suitable_orders() and thp_vma_allowable_orders() respectively.
Convenience functions that take a single, unencoded order and return a
boolean are also defined as thp_vma_suitable_order() and
thp_vma_allowable_order().
The second half of the change implements the new sysfs interface. It has
been done so that each supported THP size has a `struct thpsize`, which
describes the relevant metadata and is itself a kobject. This is pretty
minimal for now, but should make it easy to add new per-thpsize files to
the interface if needed in future (e.g. per-size defrag). Rather than
keep the `enabled` state directly in the struct thpsize, I've elected to
directly encode it into huge_anon_orders_[always|madvise|inherit]
bitfields since this reduces the amount of work required in
thp_vma_allowable_orders() which is called for every page fault.
See Documentation/admin-guide/mm/transhuge.rst, as modified by this
commit, for details of how the new sysfs interface works.
[ryan.roberts@arm.com: fix build warning when CONFIG_SYSFS is disabled]
Link: https://lkml.kernel.org/r/20231211125320.3997543-1-ryan.roberts@arm.com
Link: https://lkml.kernel.org/r/20231207161211.2374093-4-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Barry Song <v-songbaohua@oppo.com>
Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Tested-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Rientjes <rientjes@google.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Itaru Kitayama <itaru.kitayama@gmail.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "workload-specific and memory pressure-driven zswap
writeback", v8.
There are currently several issues with zswap writeback:
1. There is only a single global LRU for zswap, making it impossible to
perform worload-specific shrinking - an memcg under memory pressure
cannot determine which pages in the pool it owns, and often ends up
writing pages from other memcgs. This issue has been previously
observed in practice and mitigated by simply disabling
memcg-initiated shrinking:
https://lore.kernel.org/all/20230530232435.3097106-1-nphamcs@gmail.com/T/#u
But this solution leaves a lot to be desired, as we still do not
have an avenue for an memcg to free up its own memory locked up in
the zswap pool.
2. We only shrink the zswap pool when the user-defined limit is hit.
This means that if we set the limit too high, cold data that are
unlikely to be used again will reside in the pool, wasting precious
memory. It is hard to predict how much zswap space will be needed
ahead of time, as this depends on the workload (specifically, on
factors such as memory access patterns and compressibility of the
memory pages).
This patch series solves these issues by separating the global zswap LRU
into per-memcg and per-NUMA LRUs, and performs workload-specific (i.e
memcg- and NUMA-aware) zswap writeback under memory pressure. The new
shrinker does not have any parameter that must be tuned by the user, and
can be opted in or out on a per-memcg basis.
As a proof of concept, we ran the following synthetic benchmark: build the
linux kernel in a memory-limited cgroup, and allocate some cold data in
tmpfs to see if the shrinker could write them out and improved the overall
performance. Depending on the amount of cold data generated, we observe
from 14% to 35% reduction in kernel CPU time used in the kernel builds.
This patch (of 6):
The interface of list_lru is based on the assumption that the list node
and the data it represents belong to the same allocated on the correct
node/memcg. While this assumption is valid for existing slab objects LRU
such as dentries and inodes, it is undocumented, and rather inflexible for
certain potential list_lru users (such as the upcoming zswap shrinker and
the THP shrinker). It has caused us a lot of issues during our
development.
This patch changes list_lru interface so that the caller must explicitly
specify numa node and memcg when adding and removing objects. The old
list_lru_add() and list_lru_del() are renamed to list_lru_add_obj() and
list_lru_del_obj(), respectively.
It also extends the list_lru API with a new function, list_lru_putback,
which undoes a previous list_lru_isolate call. Unlike list_lru_add, it
does not increment the LRU node count (as list_lru_isolate does not
decrement the node count). list_lru_putback also allows for explicit
memcg and NUMA node selection.
Link: https://lkml.kernel.org/r/20231130194023.4102148-1-nphamcs@gmail.com
Link: https://lkml.kernel.org/r/20231130194023.4102148-2-nphamcs@gmail.com
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Hugetlb vmemmap default option (HUGETLB_PAGE_OPTIMIZE_VMEMMAP_DEFAULT_ON)
is a sub-option to hugetlbfs, but it shows in the same level as hugetlbfs
itself, under "Pesudo filesystems".
Make the vmemmap option a sub-option to hugetlbfs, by changing hugetlbfs
into a menuconfig. When moving it, fix a typo 'v' spot by Randy.
Link: https://lkml.kernel.org/r/20231124151902.1075697-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There were already assertions that we were not passing a tail page to
error_remove_page(), so make the compiler enforce that by converting
everything to pass and use a folio.
Link: https://lkml.kernel.org/r/20231117161447.2461643-7-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In preparation for removing the return value entirely, stop testing it
in smb.
Link: https://lkml.kernel.org/r/20231108204605.745109-4-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Steve French <sfrench@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In preparation for removing the return value entirely, stop testing it
in afs.
Link: https://lkml.kernel.org/r/20231108204605.745109-3-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Steve French <sfrench@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Use folio_fill_tail() to implement the unstuffing and folio_end_read() to
simultaneously mark the folio uptodate and unlock it. Unifies a couple of
code paths.
Link: https://lkml.kernel.org/r/20231107212643.3490372-4-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The iomap code was limited to PAGE_SIZE bytes; generalise it to cover
an arbitrary-sized folio, and move it to be a common helper.
[akpm@linux-foundation.org: fix folio_fill_tail(), per Andreas Gruenbacher]
Link: https://lkml.kernel.org/r/20231107212643.3490372-3-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Add folio_zero_tail() and folio_fill_tail()".
I'm trying to make it easier for filesystems with tailpacking / stuffing /
inline data to use folios. The primary function here is
folio_fill_tail(). You give it a pointer to memory where the data
currently is, and it takes care of copying it into the folio at that
offset. That works for gfs2 & iomap. Then There's Ext4. Rather than gin
up some kind of specialist "Here's a two pointers to two blocks of memory"
routine, just let it do its current thing, and let it call
folio_zero_tail(), which is also called by folio_fill_tail().
Other filesystems can be converted later; these ones seemed like good
examples as they're already partly or completely converted to folios.
This patch (of 3):
Instead of unmapping the folio after copying the data to it, then mapping
it again to zero the tail, provide folio_zero_tail() to zero the tail of
an already-mapped folio.
[akpm@linux-foundation.org: fix kerneldoc argument ordering]
Link: https://lkml.kernel.org/r/20231107212643.3490372-1-willy@infradead.org
Link: https://lkml.kernel.org/r/20231107212643.3490372-2-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The PAGEMAP_SCAN ioctl returns information regarding page table entries.
It is more efficient compared to reading pagemap files. CRIU can start to
utilize this ioctl, but it needs info about soft-dirty bits to track
memory changes.
We are aware of a new method for tracking memory changes implemented in
the PAGEMAP_SCAN ioctl. For CRIU, the primary advantage of this method is
its usability by unprivileged users. However, it is not feasible to
transparently replace the soft-dirty tracker with the new one. The main
problem here is userfault descriptors that have to be preserved between
pre-dump iterations. It means criu continues supporting the soft-dirty
method to avoid breakage for current users. The new method will be
implemented as a separate feature.
[avagin@google.com: update tools/include/uapi/linux/fs.h]
Link: https://lkml.kernel.org/r/20231107164139.576046-1-avagin@google.com
Link: https://lkml.kernel.org/r/20231106220959.296568-1-avagin@google.com
Signed-off-by: Andrei Vagin <avagin@google.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
If nilfs2 reads a disk image with corrupted segment usage metadata, and
its segment usage information is marked as an error for the segment at the
write location, nilfs_sufile_set_segment_usage() can trigger WARN_ONs
during log writing.
Segments newly allocated for writing with nilfs_sufile_alloc() will not
have this error flag set, but this unexpected situation will occur if the
segment indexed by either nilfs->ns_segnum or nilfs->ns_nextnum (active
segment) was marked in error.
Fix this issue by inserting a sanity check to treat it as a file system
corruption.
Since error returns are not allowed during the execution phase where
nilfs_sufile_set_segment_usage() is used, this inserts the sanity check
into nilfs_sufile_mark_dirty() which pre-reads the buffer containing the
segment usage record to be updated and sets it up in a dirty state for
writing.
In addition, nilfs_sufile_set_segment_usage() is also called when
canceling log writing and undoing segment usage update, so in order to
avoid issuing the same kernel warning in that case, in case of
cancellation, avoid checking the error flag in
nilfs_sufile_set_segment_usage().
Link: https://lkml.kernel.org/r/20231205085947.4431-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+14e9f834f6ddecece094@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=14e9f834f6ddecece094
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
After commit a08c7193e4 "mm/filemap: remove hugetlb special casing in
filemap.c", hugetlb pages are stored in the page cache in base page sized
indexes. This leads to multi index stores in the xarray which is only
supporting through CONFIG_XARRAY_MULTI. The other page cache user of
multi index stores ,THP, selects XARRAY_MULTI. Have CONFIG_HUGETLB_PAGE
follow this behavior as well to avoid the BUG() with a CONFIG_HUGETLB_PAGE
&& !CONFIG_XARRAY_MULTI config.
Link: https://lkml.kernel.org/r/20231204183234.348697-1-sidhartha.kumar@oracle.com
Fixes: a08c7193e4 ("mm/filemap: remove hugetlb special casing in filemap.c")
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When mounting a filesystem image with a block size larger than the page
size, nilfs2 repeatedly outputs long error messages with stack traces to
the kernel log, such as the following:
getblk(): invalid block size 8192 requested
logical block size: 512
...
Call Trace:
dump_stack_lvl+0x92/0xd4
dump_stack+0xd/0x10
bdev_getblk+0x33a/0x354
__breadahead+0x11/0x80
nilfs_search_super_root+0xe2/0x704 [nilfs2]
load_nilfs+0x72/0x504 [nilfs2]
nilfs_mount+0x30f/0x518 [nilfs2]
legacy_get_tree+0x1b/0x40
vfs_get_tree+0x18/0xc4
path_mount+0x786/0xa88
__ia32_sys_mount+0x147/0x1a8
__do_fast_syscall_32+0x56/0xc8
do_fast_syscall_32+0x29/0x58
do_SYSENTER_32+0x15/0x18
entry_SYSENTER_32+0x98/0xf1
...
This overloads the system logger. And to make matters worse, it sometimes
crashes the kernel with a memory access violation.
This is because the return value of the sb_set_blocksize() call, which
should be checked for errors, is not checked.
The latter issue is due to out-of-buffer memory being accessed based on a
large block size that caused sb_set_blocksize() to fail for buffers read
with the initial minimum block size that remained unupdated in the
super_block structure.
Since nilfs2 mkfs tool does not accept block sizes larger than the system
page size, this has been overlooked. However, it is possible to create
this situation by intentionally modifying the tool or by passing a
filesystem image created on a system with a large page size to a system
with a smaller page size and mounting it.
Fix this issue by inserting the expected error handling for the call to
sb_set_blocksize().
Link: https://lkml.kernel.org/r/20231129141547.4726-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The new pagemap ioctl contains a fast path for wr-protections without
looking into category masks. It forgets to check PM_SCAN_WP_MATCHING
before applying the wr-protections. It can cause, e.g., pte markers
installed on archs that do not even support uffd wr-protect.
WARNING: CPU: 0 PID: 5059 at mm/memory.c:1520 zap_pte_range mm/memory.c:1520 [inline]
Link: https://lkml.kernel.org/r/20231116201547.536857-3-peterx@redhat.com
Fixes: 12f6b01a0b ("fs/proc/task_mmu: add fast paths to get/clear PAGE_IS_WRITTEN flag")
Signed-off-by: Peter Xu <peterx@redhat.com>
Reported-by: syzbot+7ca4b2719dc742b8d0a4@syzkaller.appspotmail.com
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Andrei Vagin <avagin@gmail.com>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/pagemap: A few fixes to the recent PAGEMAP_SCAN".
This series should fix two known reports from syzbot on the new
PAGEMAP_SCAN ioctl():
https://lore.kernel.org/all/000000000000b0e576060a30ee3b@google.com/https://lore.kernel.org/all/000000000000773fa7060a31e2cc@google.com/
The 3rd patch is something I found when testing these patches.
This patch (of 3):
The new ioctl(PAGEMAP_SCAN) relies on vma wr-protect capability provided
by userfault, however in the vma test it didn't explicitly require the vma
to have wr-protect function enabled, even if PM_SCAN_WP_MATCHING flag is
set.
It means the pagemap code can now apply uffd-wp bit to a page in the vma
even if not registered to userfaultfd at all.
Then in whatever way as long as the pte got written and page fault
resolved, we'll apply the write bit even if uffd-wp bit is set. We'll see
a pte that has both UFFD_WP and WRITE bit set. Anything later that looks
up the pte for uffd-wp bit will trigger the warning:
WARNING: CPU: 1 PID: 5071 at arch/x86/include/asm/pgtable.h:403 pte_uffd_wp arch/x86/include/asm/pgtable.h:403 [inline]
Fix it by doing proper check over the vma attributes when
PM_SCAN_WP_MATCHING is specified.
Link: https://lkml.kernel.org/r/20231116201547.536857-1-peterx@redhat.com
Link: https://lkml.kernel.org/r/20231116201547.536857-2-peterx@redhat.com
Fixes: 52526ca7fd ("fs/proc/task_mmu: implement IOCTL to get and optionally clear info about PTEs")
Signed-off-by: Peter Xu <peterx@redhat.com>
Reported-by: syzbot+e94c5aaf7890901ebf9b@syzkaller.appspotmail.com
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Andrei Vagin <avagin@gmail.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----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=g+0x
-----END PGP SIGNATURE-----
Merge tag 'v6.7-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- Two fallocate fixes
- Fix warnings from new gcc
- Two symlink fixes
* tag 'v6.7-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client, common: fix fortify warnings
cifs: Fix FALLOC_FL_INSERT_RANGE by setting i_size after EOF moved
cifs: Fix FALLOC_FL_ZERO_RANGE by setting i_size if EOF moved
smb: client: report correct st_size for SMB and NFS symlinks
smb: client: fix missing mode bits for SMB symlinks
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAmVpr4QACgkQnJ2qBz9k
QNkoPQf/aurRZZcMHmcYEmd//O59iRXYQVgO9+ORtjqIgB4wHD5q5eYK70eatxmR
nZkntlFZSTUj9bbgzwOJWzhrsBGfZ2tWY1JFQl/Dlk2nF02rg2aIt1ZksqtNF4wX
Qt/yGpf+5ubYLxmpxHhBirR3l9DgBppZsTbS2oY5ki17IM4+eOrvMWHHyMcO9Tpb
jWaiqDueZRL6HCP52cusAJZ6x72vJzivbGGQffbfR4NNGz4YXaiCUQcCnAoW8xcO
u8xTZ1iH6jrolBSJHNA9fKoYN69aTjPkGFQFnZuOBBgVlUyWYXeJO+9psxusqhE0
FrghuuGZMhQNkTAKbJTpmeMQ8XRYFQ==
=Lhm6
-----END PGP SIGNATURE-----
Merge tag 'fs_for_v6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull ext2 fix from Jan Kara:
"Fix an ext2 bug introduced by changes in ext2 & iomap stepping on each
other toes (apparently ext2 driver does not get much testing in
linux-next)"
* tag 'fs_for_v6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
ext2: Fix ki_pos update for DIO buffered-io fallback case
Bigger/user visible fixes:
- bcache & bcachefs were broken with CFI enabled; patch for closures to
fix type punning
- mark erasure coding as extra-experimental; there are incompatible
disk space accounting changes coming for erasure coding, and I'm
still seeing checksum errors in some tests
- several fixes for durability-related issues (durability is a device
specific setting where we can tell bcachefs that data on a given
device should be counted as replicated x times )
- a fix for a rare livelock when a btree node merge then updates a
parent node that is almost full
- fix a race in the device removal path, where dropping a pointer in a
btree node to a device would be clobbered by an in flight btree write
updating the btree node key on completion
- fix one SRCU lock hold time warning in the btree gc code - ther's
still a bunch more of these to fix
- fix a rare race where we'd start copygc before initializing the "are
we rw" percpu refcount; copygc would think we were already ro and die
immediately
https://evilpiepirate.org/~testdashboard/ci?branch=bcachefs-for-upstream
-----BEGIN PGP SIGNATURE-----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=vN+y
-----END PGP SIGNATURE-----
Merge tag 'bcachefs-2023-11-29' of https://evilpiepirate.org/git/bcachefs
Pull more bcachefs bugfixes from Kent Overstreet:
- bcache & bcachefs were broken with CFI enabled; patch for closures to
fix type punning
- mark erasure coding as extra-experimental; there are incompatible
disk space accounting changes coming for erasure coding, and I'm
still seeing checksum errors in some tests
- several fixes for durability-related issues (durability is a device
specific setting where we can tell bcachefs that data on a given
device should be counted as replicated x times)
- a fix for a rare livelock when a btree node merge then updates a
parent node that is almost full
- fix a race in the device removal path, where dropping a pointer in a
btree node to a device would be clobbered by an in flight btree write
updating the btree node key on completion
- fix one SRCU lock hold time warning in the btree gc code - ther's
still a bunch more of these to fix
- fix a rare race where we'd start copygc before initializing the "are
we rw" percpu refcount; copygc would think we were already ro and die
immediately
* tag 'bcachefs-2023-11-29' of https://evilpiepirate.org/git/bcachefs: (23 commits)
bcachefs: Extra kthread_should_stop() calls for copygc
bcachefs: Convert gc_alloc_start() to for_each_btree_key2()
bcachefs: Fix race between btree writes and metadata drop
bcachefs: move journal seq assertion
bcachefs: -EROFS doesn't count as move_extent_start_fail
bcachefs: trace_move_extent_start_fail() now includes errcode
bcachefs: Fix split_race livelock
bcachefs: Fix bucket data type for stripe buckets
bcachefs: Add missing validation for jset_entry_data_usage
bcachefs: Fix zstd compress workspace size
bcachefs: bpos is misaligned on big endian
bcachefs: Fix ec + durability calculation
bcachefs: Data update path won't accidentaly grow replicas
bcachefs: deallocate_extra_replicas()
bcachefs: Proper refcounting for journal_keys
bcachefs: preserve device path as device name
bcachefs: Fix an endianness conversion
bcachefs: Start gc, copygc, rebalance threads after initing writes ref
bcachefs: Don't stop copygc thread on device resize
bcachefs: Make sure bch2_move_ratelimit() also waits for move_ops
...
Current release - regressions:
- neighbour: fix __randomize_layout crash in struct neighbour
- r8169: fix deadlock on RTL8125 in jumbo mtu mode
Previous releases - regressions:
- wifi:
- mac80211: fix warning at station removal time
- cfg80211: fix CQM for non-range use
- tools: ynl-gen: fix unexpected response handling
- octeontx2-af: fix possible buffer overflow
- dpaa2: recycle the RX buffer only after all processing done
- rswitch: fix missing dev_kfree_skb_any() in error path
Previous releases - always broken:
- ipv4: fix uaf issue when receiving igmp query packet
- wifi: mac80211: fix debugfs deadlock at device removal time
- bpf:
- sockmap: af_unix stream sockets need to hold ref for pair sock
- netdevsim: don't accept device bound programs
- selftests: fix a char signedness issue
- dsa: mv88e6xxx: fix marvell 6350 probe crash
- octeontx2-pf: restore TC ingress police rules when interface is up
- wangxun: fix memory leak on msix entry
- ravb: keep reverse order of operations in ravb_remove()
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=QiQp
-----END PGP SIGNATURE-----
Merge tag 'net-6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bpf and wifi.
Current release - regressions:
- neighbour: fix __randomize_layout crash in struct neighbour
- r8169: fix deadlock on RTL8125 in jumbo mtu mode
Previous releases - regressions:
- wifi:
- mac80211: fix warning at station removal time
- cfg80211: fix CQM for non-range use
- tools: ynl-gen: fix unexpected response handling
- octeontx2-af: fix possible buffer overflow
- dpaa2: recycle the RX buffer only after all processing done
- rswitch: fix missing dev_kfree_skb_any() in error path
Previous releases - always broken:
- ipv4: fix uaf issue when receiving igmp query packet
- wifi: mac80211: fix debugfs deadlock at device removal time
- bpf:
- sockmap: af_unix stream sockets need to hold ref for pair sock
- netdevsim: don't accept device bound programs
- selftests: fix a char signedness issue
- dsa: mv88e6xxx: fix marvell 6350 probe crash
- octeontx2-pf: restore TC ingress police rules when interface is up
- wangxun: fix memory leak on msix entry
- ravb: keep reverse order of operations in ravb_remove()"
* tag 'net-6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (51 commits)
net: ravb: Keep reverse order of operations in ravb_remove()
net: ravb: Stop DMA in case of failures on ravb_open()
net: ravb: Start TX queues after HW initialization succeeded
net: ravb: Make write access to CXR35 first before accessing other EMAC registers
net: ravb: Use pm_runtime_resume_and_get()
net: ravb: Check return value of reset_control_deassert()
net: libwx: fix memory leak on msix entry
ice: Fix VF Reset paths when interface in a failed over aggregate
bpf, sockmap: Add af_unix test with both sockets in map
bpf, sockmap: af_unix stream sockets need to hold ref for pair sock
tools: ynl-gen: always construct struct ynl_req_state
ethtool: don't propagate EOPNOTSUPP from dumps
ravb: Fix races between ravb_tx_timeout_work() and net related ops
r8169: prevent potential deadlock in rtl8169_close
r8169: fix deadlock on RTL8125 in jumbo mtu mode
neighbour: Fix __randomize_layout crash in struct neighbour
octeontx2-pf: Restore TC ingress police rules when interface is up
octeontx2-pf: Fix adding mbox work queue entry when num_vfs > 64
net: stmmac: xgmac: Disable FPE MMC interrupts
octeontx2-af: Fix possible buffer overflow
...
When compiling with gcc version 14.0.0 20231126 (experimental)
and CONFIG_FORTIFY_SOURCE=y, I've noticed the following:
In file included from ./include/linux/string.h:295,
from ./include/linux/bitmap.h:12,
from ./include/linux/cpumask.h:12,
from ./arch/x86/include/asm/paravirt.h:17,
from ./arch/x86/include/asm/cpuid.h:62,
from ./arch/x86/include/asm/processor.h:19,
from ./arch/x86/include/asm/cpufeature.h:5,
from ./arch/x86/include/asm/thread_info.h:53,
from ./include/linux/thread_info.h:60,
from ./arch/x86/include/asm/preempt.h:9,
from ./include/linux/preempt.h:79,
from ./include/linux/spinlock.h:56,
from ./include/linux/wait.h:9,
from ./include/linux/wait_bit.h:8,
from ./include/linux/fs.h:6,
from fs/smb/client/smb2pdu.c:18:
In function 'fortify_memcpy_chk',
inlined from '__SMB2_close' at fs/smb/client/smb2pdu.c:3480:4:
./include/linux/fortify-string.h:588:25: warning: call to '__read_overflow2_field'
declared with attribute warning: detected read beyond size of field (2nd parameter);
maybe use struct_group()? [-Wattribute-warning]
588 | __read_overflow2_field(q_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
and:
In file included from ./include/linux/string.h:295,
from ./include/linux/bitmap.h:12,
from ./include/linux/cpumask.h:12,
from ./arch/x86/include/asm/paravirt.h:17,
from ./arch/x86/include/asm/cpuid.h:62,
from ./arch/x86/include/asm/processor.h:19,
from ./arch/x86/include/asm/cpufeature.h:5,
from ./arch/x86/include/asm/thread_info.h:53,
from ./include/linux/thread_info.h:60,
from ./arch/x86/include/asm/preempt.h:9,
from ./include/linux/preempt.h:79,
from ./include/linux/spinlock.h:56,
from ./include/linux/wait.h:9,
from ./include/linux/wait_bit.h:8,
from ./include/linux/fs.h:6,
from fs/smb/client/cifssmb.c:17:
In function 'fortify_memcpy_chk',
inlined from 'CIFS_open' at fs/smb/client/cifssmb.c:1248:3:
./include/linux/fortify-string.h:588:25: warning: call to '__read_overflow2_field'
declared with attribute warning: detected read beyond size of field (2nd parameter);
maybe use struct_group()? [-Wattribute-warning]
588 | __read_overflow2_field(q_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In both cases, the fortification logic inteprets calls to 'memcpy()' as an
attempts to copy an amount of data which exceeds the size of the specified
field (i.e. more than 8 bytes from __le64 value) and thus issues an overread
warning. Both of these warnings may be silenced by using the convenient
'struct_group()' quirk.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
- debugfs had a deadlock (removal vs. use of files),
fixes going through wireless ACKed by Greg
- support for HT STAs on 320 MHz channels, even if it's
not clear that should ever happen (that's 6 GHz), best
not to WARN()
- fix for the previous CQM fix that broke most cases
- various wiphy locking fixes
- various small driver fixes
-----BEGIN PGP SIGNATURE-----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=X6t2
-----END PGP SIGNATURE-----
Merge tag 'wireless-2023-11-29' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
wireless fixes:
- debugfs had a deadlock (removal vs. use of files),
fixes going through wireless ACKed by Greg
- support for HT STAs on 320 MHz channels, even if it's
not clear that should ever happen (that's 6 GHz), best
not to WARN()
- fix for the previous CQM fix that broke most cases
- various wiphy locking fixes
- various small driver fixes
* tag 'wireless-2023-11-29' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: mac80211: use wiphy locked debugfs for sdata/link
wifi: mac80211: use wiphy locked debugfs helpers for agg_status
wifi: cfg80211: add locked debugfs wrappers
debugfs: add API to allow debugfs operations cancellation
debugfs: annotate debugfs handlers vs. removal with lockdep
debugfs: fix automount d_fsdata usage
wifi: mac80211: handle 320 MHz in ieee80211_ht_cap_ie_to_sta_ht_cap
wifi: avoid offset calculation on NULL pointer
wifi: cfg80211: hold wiphy mutex for send_interface
wifi: cfg80211: lock wiphy mutex for rfkill poll
wifi: cfg80211: fix CQM for non-range use
wifi: mac80211: do not pass AP_VLAN vif pointer to drivers during flush
wifi: iwlwifi: mvm: fix an error code in iwl_mvm_mld_add_sta()
wifi: mt76: mt7925: fix typo in mt7925_init_he_caps
wifi: mt76: mt7921: fix 6GHz disabled by the missing default CLC config
====================
Link: https://lore.kernel.org/r/20231129150809.31083-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix the cifs filesystem implementations of FALLOC_FL_INSERT_RANGE, in
smb3_insert_range(), to set i_size after extending the file on the server
and before we do the copy to open the gap (as we don't clean up the EOF
marker if the copy fails).
Fixes: 7fe6fe95b9 ("cifs: add FALLOC_FL_INSERT_RANGE support")
Cc: stable@vger.kernel.org
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Paulo Alcantara <pc@manguebit.com>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: linux-mm@kvack.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Fix the cifs filesystem implementations of FALLOC_FL_ZERO_RANGE, in
smb3_zero_range(), to set i_size after extending the file on the server.
Fixes: 72c419d9b0 ("cifs: fix smb3_zero_range so it can expand the file-size when required")
Cc: stable@vger.kernel.org
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Paulo Alcantara <pc@manguebit.com>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: linux-mm@kvack.org
Signed-off-by: Steve French <stfrench@microsoft.com>
This fixes a bug where going read-only was taking longer than it should
have due to copygc forgetting to check kthread_should_stop()
Additionally: fix a missing is_kthread check in bch2_move_ratelimit().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This eliminates some SRCU warnings: for_each_btree_key2() runs every
loop iteration in a distinct transaction context.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
btree writes update the btree node key after every write, in order to
update sectors_written, and they also might need to drop pointers if one
of the writes failed in a replicated btree node.
But the btree node might also have had a pointer dropped while the write
was in flight, by bch2_dev_metadata_drop(), and thus there was a bug
where the btree node write would ovewrite the btree node's key with what
it had at the start of the write.
Fix this by dropping pointers not currently in the btree node key.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
journal_cur_seq() can legitimately be used outside of the journal lock,
where this assert can race
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The automated tests check if we've hit too many slowpath/error path
events and fail the test - if we're just shutting down, that naturally
shouldn't count.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We can't rely on FILE_STANDARD_INFORMATION::EndOfFile for reparse
points as they will be always zero. Set it to symlink target's length
as specified by POSIX.
This will make stat() family of syscalls return the correct st_size
for such files.
Cc: stable@vger.kernel.org
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
When instantiating inodes for SMB symlinks, add the mode bits from
@cifs_sb->ctx->file_mode as we already do for the other special files.
Cc: stable@vger.kernel.org
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Renamed from trace_move_extent_alloc_mem_fail, because there are other
reasons we colud fail (disk space allocation failure).
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
bch2_btree_update_start() calculates which nodes are going to have to be
split/rewritten, so that we know how many nodes to reserve and how deep
in the tree we have to take locks.
But btree node merges require inserting two keys into the parent node,
not just splits.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
