The actual number of bytes stored in a PRZ is smaller than the
bytes requested by platform data, since there is a header on each
PRZ. Additionally, if ECC is enabled, there are trailing bytes used
as well. Normally this mismatch doesn't matter since PRZs are circular
buffers and the leading "overflow" bytes are just thrown away. However, in
the case of a compressed record, this rather badly corrupts the results.
This corruption was visible with "ramoops.mem_size=204800 ramoops.ecc=1".
Any stored crashes would not be uncompressable (producing a pstorefs
"dmesg-*.enc.z" file), and triggering errors at boot:
[ 2.790759] pstore: crypto_comp_decompress failed, ret = -22!
Backporting this depends on commit 70ad35db33 ("pstore: Convert console
write to use ->write_buf")
Reported-by: Joel Fernandes <joel@joelfernandes.org>
Fixes: b0aad7a99c ("pstore: Add compression support to pstore")
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
All architecures use memblock for early memory management. There is no need
for the CONFIG_HAVE_MEMBLOCK configuration option.
[rppt@linux.vnet.ibm.com: of/fdt: fixup #ifdefs]
Link: http://lkml.kernel.org/r/20180919103457.GA20545@rapoport-lnx
[rppt@linux.vnet.ibm.com: csky: fixups after bootmem removal]
Link: http://lkml.kernel.org/r/20180926112744.GC4628@rapoport-lnx
[rppt@linux.vnet.ibm.com: remove stale #else and the code it protects]
Link: http://lkml.kernel.org/r/1538067825-24835-1-git-send-email-rppt@linux.vnet.ibm.com
Link: http://lkml.kernel.org/r/1536927045-23536-4-git-send-email-rppt@linux.vnet.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Tested-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Serge Semin <fancer.lancer@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When ramoops reserved a memory region in the kernel, it had an unhelpful
label of "persistent_memory". When reading /proc/iomem, it would be
repeated many times, did not hint that it was ramoops in particular,
and didn't clarify very much about what each was used for:
400000000-407ffffff : Persistent Memory (legacy)
400000000-400000fff : persistent_memory
400001000-400001fff : persistent_memory
...
4000ff000-4000fffff : persistent_memory
Instead, this adds meaningful labels for how the various regions are
being used:
400000000-407ffffff : Persistent Memory (legacy)
400000000-400000fff : ramoops:dump(0/252)
400001000-400001fff : ramoops:dump(1/252)
...
4000fc000-4000fcfff : ramoops:dump(252/252)
4000fd000-4000fdfff : ramoops:console
4000fe000-4000fe3ff : ramoops:ftrace(0/3)
4000fe400-4000fe7ff : ramoops:ftrace(1/3)
4000fe800-4000febff : ramoops:ftrace(2/3)
4000fec00-4000fefff : ramoops:ftrace(3/3)
4000ff000-4000fffff : ramoops:pmsg
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Tested-by: Guenter Roeck <groeck@chromium.org>
This refactors compression initialization slightly to better handle
getting potentially called twice (via early pstore_register() calls
and later pstore_init()) and improves the comments and reporting to be
more verbose.
Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Guenter Roeck <groeck@chromium.org>
ramoops's call of pstore_register() was recently moved to run during
late_initcall() because the crypto backend may not have been ready during
postcore_initcall(). This meant early-boot crash dumps were not getting
caught by pstore any more.
Instead, lets allow calls to pstore_register() earlier, and once crypto
is ready we can initialize the compression.
Reported-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Fixes: cb3bee0369 ("pstore: Use crypto compress API")
[kees: trivial rebase]
Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Guenter Roeck <groeck@chromium.org>
In preparation for having additional actions during init/exit, this moves
the init/exit into platform.c, centralizing the logic to make call outs
to the fs init/exit.
Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Guenter Roeck <groeck@chromium.org>
As reported by nixiaoming, with some minor clarifications:
1) memory leak in ramoops_register_dummy():
dummy_data = kzalloc(sizeof(*dummy_data), GFP_KERNEL);
but no kfree() if platform_device_register_data() fails.
2) memory leak in ramoops_init():
Missing platform_device_unregister(dummy) and kfree(dummy_data)
if platform_driver_register(&ramoops_driver) fails.
I've clarified the purpose of ramoops_register_dummy(), and added a
common cleanup routine for all three failure paths to call.
Reported-by: nixiaoming <nixiaoming@huawei.com>
Cc: stable@vger.kernel.org
Cc: Anton Vorontsov <anton@enomsg.org>
Cc: Colin Cross <ccross@android.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
persistent_ram_vmap() returns the page start vaddr.
persistent_ram_iomap() supports non-page-aligned mapping.
persistent_ram_buffer_map() always adds offset-in-page to the vaddr
returned from these two functions, which causes incorrect mapping of
non-page-aligned persistent ram buffer.
By default ftrace_size is 4096 and max_ftrace_cnt is nr_cpu_ids. Without
this patch, the zone_sz in ramoops_init_przs() is 4096/nr_cpu_ids which
might not be page aligned. If the offset-in-page > 2048, the vaddr will be
in next page. If the next page is not mapped, it will cause kernel panic:
[ 0.074231] BUG: unable to handle kernel paging request at ffffa19e0081b000
...
[ 0.075000] RIP: 0010:persistent_ram_new+0x1f8/0x39f
...
[ 0.075000] Call Trace:
[ 0.075000] ramoops_init_przs.part.10.constprop.15+0x105/0x260
[ 0.075000] ramoops_probe+0x232/0x3a0
[ 0.075000] platform_drv_probe+0x3e/0xa0
[ 0.075000] driver_probe_device+0x2cd/0x400
[ 0.075000] __driver_attach+0xe4/0x110
[ 0.075000] ? driver_probe_device+0x400/0x400
[ 0.075000] bus_for_each_dev+0x70/0xa0
[ 0.075000] driver_attach+0x1e/0x20
[ 0.075000] bus_add_driver+0x159/0x230
[ 0.075000] ? do_early_param+0x95/0x95
[ 0.075000] driver_register+0x70/0xc0
[ 0.075000] ? init_pstore_fs+0x4d/0x4d
[ 0.075000] __platform_driver_register+0x36/0x40
[ 0.075000] ramoops_init+0x12f/0x131
[ 0.075000] do_one_initcall+0x4d/0x12c
[ 0.075000] ? do_early_param+0x95/0x95
[ 0.075000] kernel_init_freeable+0x19b/0x222
[ 0.075000] ? rest_init+0xbb/0xbb
[ 0.075000] kernel_init+0xe/0xfc
[ 0.075000] ret_from_fork+0x3a/0x50
Signed-off-by: Bin Yang <bin.yang@intel.com>
[kees: add comments describing the mapping differences, updated commit log]
Fixes: 24c3d2f342 ("staging: android: persistent_ram: Make it possible to use memory outside of bootmem")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
This patch added the 6th compression algorithm support for pstore: zstd.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
The pstore conversion to timespec64 introduces its own method of passing
seconds into sscanf() and sprintf() type functions to work around the
timespec64 definition on 64-bit systems that redefine it to 'timespec'.
That hack is now finally getting removed, but that means we get a (harmless)
warning once both patches are merged:
fs/pstore/ram.c: In function 'ramoops_read_kmsg_hdr':
fs/pstore/ram.c:39:29: error: format '%ld' expects argument of type 'long int *', but argument 3 has type 'time64_t *' {aka 'long long int *'} [-Werror=format=]
#define RAMOOPS_KERNMSG_HDR "===="
^~~~~~
fs/pstore/ram.c:167:21: note: in expansion of macro 'RAMOOPS_KERNMSG_HDR'
This removes the pstore specific workaround and uses the same method that
we have in place for all other functions that print a timespec64.
Related to this, I found that the kasprintf() output contains an incorrect
nanosecond values for any number starting with zeroes, and I adapt the
format string accordingly.
Link: https://lkml.org/lkml/2018/5/19/115
Link: https://lkml.org/lkml/2018/5/16/1080
Fixes: 0f0d83b99ef7 ("pstore: Convert internal records to timespec64")
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This prepares pstore for converting the VFS layer to timespec64.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Commit 58eb5b6707 ("pstore: fix crypto dependencies") fixed up the crypto
dependencies but missed the case when no compression is selected.
With CONFIG_PSTORE=y, CONFIG_PSTORE_COMPRESS=n and CONFIG_CRYPTO=m we see
the following link error:
fs/pstore/platform.o: In function `pstore_register':
(.text+0x1b1): undefined reference to `crypto_has_alg'
(.text+0x205): undefined reference to `crypto_alloc_base'
fs/pstore/platform.o: In function `pstore_unregister':
(.text+0x3b0): undefined reference to `crypto_destroy_tfm'
Fix this by checking at compile-time if CONFIG_PSTORE_COMPRESS is enabled.
Fixes: 58eb5b6707 ("pstore: fix crypto dependencies")
Signed-off-by: Tobias Regnery <tobias.regnery@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kees Cook <keescook@chromium.org>
The new crypto API use causes some problems with Kconfig dependencies,
including this link error:
fs/pstore/platform.o: In function `pstore_register':
platform.c:(.text+0x248): undefined reference to `crypto_has_alg'
platform.c:(.text+0x2a0): undefined reference to `crypto_alloc_base'
fs/pstore/platform.o: In function `pstore_unregister':
platform.c:(.text+0x498): undefined reference to `crypto_destroy_tfm'
crypto/lz4hc.o: In function `lz4hc_sdecompress':
lz4hc.c:(.text+0x1a): undefined reference to `LZ4_decompress_safe'
crypto/lz4hc.o: In function `lz4hc_decompress_crypto':
lz4hc.c:(.text+0x5a): undefined reference to `LZ4_decompress_safe'
crypto/lz4hc.o: In function `lz4hc_scompress':
lz4hc.c:(.text+0xaa): undefined reference to `LZ4_compress_HC'
crypto/lz4hc.o: In function `lz4hc_mod_init':
lz4hc.c:(.init.text+0xf): undefined reference to `crypto_register_alg'
lz4hc.c:(.init.text+0x1f): undefined reference to `crypto_register_scomp'
lz4hc.c:(.init.text+0x2f): undefined reference to `crypto_unregister_alg'
The problem is that with CONFIG_CRYPTO=m, we must not 'select CRYPTO_LZ4'
from a bool symbol, or call crypto API functions from a built-in
module.
This turns the sub-options into 'tristate' ones so the dependencies
are honored, and makes the pstore itself select the crypto core
if necessary.
Fixes: cb3bee0369 ("pstore: Use crypto compress API")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kees Cook <keescook@chromium.org>
In the pstore compression part, we use zlib/lzo/lz4/lz4hc/842
compression algorithm API to implement pstore compression backends. But
there are many repeat codes in these implementations. This patch uses
crypto compress API to simplify these codes.
1) rewrite allocate_buf_for_compression, free_buf_for_compression,
pstore_compress, pstore_decompress functions using crypto compress API.
2) drop compress, decompress, allocate, free functions in pstore_zbackend,
and add zbufsize function to get each different compress buffer size.
3) use late_initcall to call ramoops_init later, to make sure the crypto
subsystem has already initialized.
4) use 'unsigned int' type instead of 'size_t' in pstore_compress,
pstore_decompress functions' length arguments.
5) rename 'zlib' to 'deflate' to follow the crypto API's name convention.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
[kees: tweaked error messages on allocation failures and Kconfig help]
Signed-off-by: Kees Cook <keescook@chromium.org>
Instead of using a stack VLA for the parity workspace, preallocate a
memory region. The preallocation is done to keep from needing to perform
allocations during crash dump writing, etc. This also fixes a missed
release of librs on free.
Signed-off-by: Kees Cook <keescook@chromium.org>
To allow for easier build test coverage and run-time testing, this allows
multiple compression algorithms to be built into pstore. Still only one
is supported to operate at a time (which can be selected at build time
or at boot time, similar to how LSMs are selected).
Signed-off-by: Kees Cook <keescook@chromium.org>
Instead of casting, make sure we don't end up with giant values and just
perform regular assignments with unsigned int instead of re-cast size_t.
Signed-off-by: Kees Cook <keescook@chromium.org>
Currently, pstore has supported three compression algorithms: zlib,
lzo and lz4. This patch added two more compression algorithms: lz4hc
and 842.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
[kees: tweaked Kconfig help text slightly]
Signed-off-by: Kees Cook <keescook@chromium.org>
Preempt counter APIs have been split out, currently, hardirq.h just
includes irq_enter/exit APIs which are not used by pstore at all.
So, remove the unused hardirq.h.
Signed-off-by: Yang Shi <yang.s@alibaba-inc.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Anton Vorontsov <anton@enomsg.org>
Cc: Colin Cross <ccross@android.com>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
This changes all DEFINE_TIMER() callbacks to use a struct timer_list
pointer instead of unsigned long. Since the data argument has already been
removed, none of these callbacks are using their argument currently, so
this renames the argument to "unused".
Done using the following semantic patch:
@match_define_timer@
declarer name DEFINE_TIMER;
identifier _timer, _callback;
@@
DEFINE_TIMER(_timer, _callback);
@change_callback depends on match_define_timer@
identifier match_define_timer._callback;
type _origtype;
identifier _origarg;
@@
void
-_callback(_origtype _origarg)
+_callback(struct timer_list *unused)
{ ... }
Signed-off-by: Kees Cook <keescook@chromium.org>
Pull misc vfs updates from Al Viro:
"Assorted stuff, really no common topic here"
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
vfs: grab the lock instead of blocking in __fd_install during resizing
vfs: stop clearing close on exec when closing a fd
include/linux/fs.h: fix comment about struct address_space
fs: make fiemap work from compat_ioctl
coda: fix 'kernel memory exposure attempt' in fsync
pstore: remove unneeded unlikely()
vfs: remove unneeded unlikely()
stubs for mount_bdev() and kill_block_super() in !CONFIG_BLOCK case
make vfs_ustat() static
do_handle_open() should be static
elf_fdpic: fix unused variable warning
fold destroy_super() into __put_super()
new helper: destroy_unused_super()
fix address space warnings in ipc/
acct.h: get rid of detritus
Pull timer updates from Thomas Gleixner:
"Yet another big pile of changes:
- More year 2038 work from Arnd slowly reaching the point where we
need to think about the syscalls themself.
- A new timer function which allows to conditionally (re)arm a timer
only when it's either not running or the new expiry time is sooner
than the armed expiry time. This allows to use a single timer for
multiple timeout requirements w/o caring about the first expiry
time at the call site.
- A new NMI safe accessor to clock real time for the printk timestamp
work. Can be used by tracing, perf as well if required.
- A large number of timer setup conversions from Kees which got
collected here because either maintainers requested so or they
simply got ignored. As Kees pointed out already there are a few
trivial merge conflicts and some redundant commits which was
unavoidable due to the size of this conversion effort.
- Avoid a redundant iteration in the timer wheel softirq processing.
- Provide a mechanism to treat RTC implementations depending on their
hardware properties, i.e. don't inflict the write at the 0.5
seconds boundary which originates from the PC CMOS RTC to all RTCs.
No functional change as drivers need to be updated separately.
- The usual small updates to core code clocksource drivers. Nothing
really exciting"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (111 commits)
timers: Add a function to start/reduce a timer
pstore: Use ktime_get_real_fast_ns() instead of __getnstimeofday()
timer: Prepare to change all DEFINE_TIMER() callbacks
netfilter: ipvs: Convert timers to use timer_setup()
scsi: qla2xxx: Convert timers to use timer_setup()
block/aoe: discover_timer: Convert timers to use timer_setup()
ide: Convert timers to use timer_setup()
drbd: Convert timers to use timer_setup()
mailbox: Convert timers to use timer_setup()
crypto: Convert timers to use timer_setup()
drivers/pcmcia: omap1: Fix error in automated timer conversion
ARM: footbridge: Fix typo in timer conversion
drivers/sgi-xp: Convert timers to use timer_setup()
drivers/pcmcia: Convert timers to use timer_setup()
drivers/memstick: Convert timers to use timer_setup()
drivers/macintosh: Convert timers to use timer_setup()
hwrng/xgene-rng: Convert timers to use timer_setup()
auxdisplay: Convert timers to use timer_setup()
sparc/led: Convert timers to use timer_setup()
mips: ip22/32: Convert timers to use timer_setup()
...
__getnstimeofday() is a rather odd interface, with a number of quirks:
- The caller may come from NMI context, but the implementation is not NMI safe,
one way to get there from NMI is
NMI handler:
something bad
panic()
kmsg_dump()
pstore_dump()
pstore_record_init()
__getnstimeofday()
- The calling conventions are different from any other timekeeping functions,
to deal with returning an error code during suspended timekeeping.
Address the above issues by using a completely different method to get the
time: ktime_get_real_fast_ns() is NMI safe and has a reasonable behavior
when timekeeping is suspended: it returns the time at which it got
suspended. As Thomas Gleixner explained, this is safe, as
ktime_get_real_fast_ns() does not call into the clocksource driver that
might be suspended.
The result can easily be transformed into a timespec structure. Since
ktime_get_real_fast_ns() was not exported to modules, add the export.
The pstore behavior for the suspended case changes slightly, as it now
stores the timestamp at which timekeeping was suspended instead of storing
a zero timestamp.
This change is not addressing y2038-safety, that's subject to a more
complex follow up patch.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Anton Vorontsov <anton@enomsg.org>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Colin Cross <ccross@android.com>
Link: https://lkml.kernel.org/r/20171110152530.1926955-1-arnd@arndb.de
IS_ERR() macro it is already including unlikely().
Signed-off-by: Hirofumi Nakagawa <nklabs@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 68c4a4f8ab, with
various conflict clean-ups.
The capability check required too much privilege compared to simple DAC
controls. A system builder was forced to have crash handler processes
run with CAP_SYSLOG which would give it the ability to read (and wipe)
the _current_ dmesg, which is much more access than being given access
only to the historical log stored in pstorefs.
With the prior commit to make the root directory 0750, the files are
protected by default but a system builder can now opt to give access
to a specific group (via chgrp on the pstorefs root directory) without
being forced to also give away CAP_SYSLOG.
Suggested-by: Nick Kralevich <nnk@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Petr Mladek <pmladek@suse.cz>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Currently only DMESG and CONSOLE record types are protected, and it isn't
obvious that they are using a capability check. Instead switch to explicit
root directory mode of 0750 to keep files private by default. This will
allow the removal of the capability check, which was non-obvious and
forces a process to have possibly too much privilege when simple post-boot
chgrp for readers would be possible without it.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Pull ->s_options removal from Al Viro:
"Preparations for fsmount/fsopen stuff (coming next cycle). Everything
gets moved to explicit ->show_options(), killing ->s_options off +
some cosmetic bits around fs/namespace.c and friends. Basically, the
stuff needed to work with fsmount series with minimum of conflicts
with other work.
It's not strictly required for this merge window, but it would reduce
the PITA during the coming cycle, so it would be nice to have those
bits and pieces out of the way"
* 'work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
isofs: Fix isofs_show_options()
VFS: Kill off s_options and helpers
orangefs: Implement show_options
9p: Implement show_options
isofs: Implement show_options
afs: Implement show_options
affs: Implement show_options
befs: Implement show_options
spufs: Implement show_options
bpf: Implement show_options
ramfs: Implement show_options
pstore: Implement show_options
omfs: Implement show_options
hugetlbfs: Implement show_options
VFS: Don't use save/replace_mount_options if not using generic_show_options
VFS: Provide empty name qstr
VFS: Make get_filesystem() return the affected filesystem
VFS: Clean up whitespace in fs/namespace.c and fs/super.c
Provide a function to create a NUL-terminated string from unterminated data
Implement the show_options superblock op for pstore as part of a bid to get
rid of s_options and generic_show_options() to make it easier to implement
a context-based mount where the mount options can be passed individually
over a file descriptor.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Kees Cook <keescook@chromium.org>
cc: Anton Vorontsov <anton@enomsg.org>
cc: Colin Cross <ccross@android.com>
cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Use memdup_user() helper instead of open-coding to simplify the code.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
The current time will be initially available in the record->time field
for all pstore_read() and pstore_write() calls. Backends can either
update the field during read(), or use the field during write() instead
of fetching time themselves.
Signed-off-by: Kees Cook <keescook@chromium.org>
In preparation for setting timestamps in the pstore core, create a common
initializer routine, instead of using static initializers.
Signed-off-by: Kees Cook <keescook@chromium.org>
If a backend does not correctly iterate through its records, pstore will
get stuck loading entries. Detect this with a large record count, and
announce if we ever hit the limit. This will let future backend reading
bugs less annoying to debug. Additionally adjust the error about
pstore_mkfile() failing.
Signed-off-by: Kees Cook <keescook@chromium.org>
When the "if (record->size <= 0)" test is true in
pstore_get_backend_records() it's pretty clear that nobody holds a
reference to the allocated pstore_record, yet we don't free it.
Let's free it.
Fixes: 2a2b0acf76 ("pstore: Allocate records on heap instead of stack")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: stable@vger.kernel.org
commit 9abdcccc3d ("pstore: Extract common arguments into structure")
moved record decompression to function. decompress_record() gets
called without checking type and compressed flag. Warning will be
reported if data is uncompressed. Pstore type PSTORE_TYPE_PPC_OPAL,
PSTORE_TYPE_PPC_COMMON doesn't contain compressed data and warning get
printed part of dmesg.
Partial dmesg log:
[ 35.848914] pstore: ignored compressed record type 6
[ 35.848927] pstore: ignored compressed record type 8
Above warning should not get printed as it is known that data won't be
compressed for above type and it is valid condition.
This patch returns if data is not compressed and print warning only if
data is compressed and type is not PSTORE_TYPE_DMESG.
Reported-by: Anton Blanchard <anton@au1.ibm.com>
Signed-off-by: Ankit Kumar <ankit@linux.vnet.ibm.com>
Reviewed-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Fixes: 9abdcccc3d ("pstore: Extract common arguments into structure")
Cc: stable@vger.kernel.org
-----BEGIN PGP SIGNATURE-----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=lbS7
-----END PGP SIGNATURE-----
Merge tag 'hwparam-20170420' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull hw lockdown support from David Howells:
"Annotation of module parameters that configure hardware resources
including ioports, iomem addresses, irq lines and dma channels.
This allows a future patch to prohibit the use of such module
parameters to prevent that hardware from being abused to gain access
to the running kernel image as part of locking the kernel down under
UEFI secure boot conditions.
Annotations are made by changing:
module_param(n, t, p)
module_param_named(n, v, t, p)
module_param_array(n, t, m, p)
to:
module_param_hw(n, t, hwtype, p)
module_param_hw_named(n, v, t, hwtype, p)
module_param_hw_array(n, t, hwtype, m, p)
where the module parameter refers to a hardware setting
hwtype specifies the type of the resource being configured. This can
be one of:
ioport Module parameter configures an I/O port
iomem Module parameter configures an I/O mem address
ioport_or_iomem Module parameter could be either (runtime set)
irq Module parameter configures an I/O port
dma Module parameter configures a DMA channel
dma_addr Module parameter configures a DMA buffer address
other Module parameter configures some other value
Note that the hwtype is compile checked, but not currently stored (the
lockdown code probably won't require it). It is, however, there for
future use.
A bonus is that the hwtype can also be used for grepping.
The intention is for the kernel to ignore or reject attempts to set
annotated module parameters if lockdown is enabled. This applies to
options passed on the boot command line, passed to insmod/modprobe or
direct twiddling in /sys/module/ parameter files.
The module initialisation then needs to handle the parameter not being
set, by (1) giving an error, (2) probing for a value or (3) using a
reasonable default.
What I can't do is just reject a module out of hand because it may
take a hardware setting in the module parameters. Some important
modules, some ipmi stuff for instance, both probe for hardware and
allow hardware to be manually specified; if the driver is aborts with
any error, you don't get any ipmi hardware.
Further, trying to do this entirely in the module initialisation code
doesn't protect against sysfs twiddling.
[!] Note that in and of itself, this series of patches should have no
effect on the the size of the kernel or code execution - that is
left to a patch in the next series to effect. It does mark
annotated kernel parameters with a KERNEL_PARAM_FL_HWPARAM flag in
an already existing field"
* tag 'hwparam-20170420' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: (38 commits)
Annotate hardware config module parameters in sound/pci/
Annotate hardware config module parameters in sound/oss/
Annotate hardware config module parameters in sound/isa/
Annotate hardware config module parameters in sound/drivers/
Annotate hardware config module parameters in fs/pstore/
Annotate hardware config module parameters in drivers/watchdog/
Annotate hardware config module parameters in drivers/video/
Annotate hardware config module parameters in drivers/tty/
Annotate hardware config module parameters in drivers/staging/vme/
Annotate hardware config module parameters in drivers/staging/speakup/
Annotate hardware config module parameters in drivers/staging/media/
Annotate hardware config module parameters in drivers/scsi/
Annotate hardware config module parameters in drivers/pcmcia/
Annotate hardware config module parameters in drivers/pci/hotplug/
Annotate hardware config module parameters in drivers/parport/
Annotate hardware config module parameters in drivers/net/wireless/
Annotate hardware config module parameters in drivers/net/wan/
Annotate hardware config module parameters in drivers/net/irda/
Annotate hardware config module parameters in drivers/net/hamradio/
Annotate hardware config module parameters in drivers/net/ethernet/
...
Lockdep complains about a possible deadlock between mount and unlink
(which is technically impossible), but fixing this improves possible
future multiple-backend support, and keeps locking in the right order.
The lockdep warning could be triggered by unlinking a file in the
pstore filesystem:
-> #1 (&sb->s_type->i_mutex_key#14){++++++}:
lock_acquire+0xc9/0x220
down_write+0x3f/0x70
pstore_mkfile+0x1f4/0x460
pstore_get_records+0x17a/0x320
pstore_fill_super+0xa4/0xc0
mount_single+0x89/0xb0
pstore_mount+0x13/0x20
mount_fs+0xf/0x90
vfs_kern_mount+0x66/0x170
do_mount+0x190/0xd50
SyS_mount+0x90/0xd0
entry_SYSCALL_64_fastpath+0x1c/0xb1
-> #0 (&psinfo->read_mutex){+.+.+.}:
__lock_acquire+0x1ac0/0x1bb0
lock_acquire+0xc9/0x220
__mutex_lock+0x6e/0x990
mutex_lock_nested+0x16/0x20
pstore_unlink+0x3f/0xa0
vfs_unlink+0xb5/0x190
do_unlinkat+0x24c/0x2a0
SyS_unlinkat+0x16/0x30
entry_SYSCALL_64_fastpath+0x1c/0xb1
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&sb->s_type->i_mutex_key#14);
lock(&psinfo->read_mutex);
lock(&sb->s_type->i_mutex_key#14);
lock(&psinfo->read_mutex);
Reported-by: Marta Lofstedt <marta.lofstedt@intel.com>
Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Since the vmalloc code has been removed from write_pmsg() in the commit
"5bf6d1b pstore/pmsg: drop bounce buffer", remove the unused header
vmalloc.h.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
When the kernel is running in secure boot mode, we lock down the kernel to
prevent userspace from modifying the running kernel image. Whilst this
includes prohibiting access to things like /dev/mem, it must also prevent
access by means of configuring driver modules in such a way as to cause a
device to access or modify the kernel image.
To this end, annotate module_param* statements that refer to hardware
configuration and indicate for future reference what type of parameter they
specify. The parameter parser in the core sees this information and can
skip such parameters with an error message if the kernel is locked down.
The module initialisation then runs as normal, but just sees whatever the
default values for those parameters is.
Note that we do still need to do the module initialisation because some
drivers have viable defaults set in case parameters aren't specified and
some drivers support automatic configuration (e.g. PNP or PCI) in addition
to manually coded parameters.
This patch annotates drivers in fs/pstore/.
Suggested-by: Alan Cox <gnomes@lxorguk.ukuu.org.uk>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Kees Cook <keescook@chromium.org>
cc: Anton Vorontsov <anton@enomsg.org>
cc: Colin Cross <ccross@android.com>
cc: Tony Luck <tony.luck@intel.com>
Nothing actually uses write_user_compat() currently, but there is no
reason to reuse the dmesg buffer. Instead, just allocate a new record
buffer, copy in from userspace, and pass it to write() as normal.
Signed-off-by: Kees Cook <keescook@chromium.org>
Now that write() and write_buf() are functionally identical, this removes
write_buf(), and renames write_buf_user() to write_user(). Additionally
adds sanity-checks for pstore_info's declared functions and flags at
registration time.
Signed-off-by: Kees Cook <keescook@chromium.org>
Removes argument list in favor of pstore record, though the user buffer
remains passed separately since it must carry the __user annotation.
Signed-off-by: Kees Cook <keescook@chromium.org>
As with the other API updates, this removes the long argument list in favor
of passing a single pstore recaord.
Signed-off-by: Kees Cook <keescook@chromium.org>
This removes the argument list for the erase() callback and replaces it
with a pointer to the backend record details to be removed.
Signed-off-by: Kees Cook <keescook@chromium.org>
This switches the inode-private data from carrying duplicate metadata to
keeping the record passed in during pstore_mkfile().
Signed-off-by: Kees Cook <keescook@chromium.org>
