valid_lft, prefered_lft and tstamp are always accessed under the lock
"lock" in other places. Reading these without taking the lock may result
in inconsistencies regarding the calculation of the valid and preferred
variables since decisions are taken on these fields for those variables.
Signed-off-by: Niels Dossche <dossche.niels@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Niels Dossche <niels.dossche@ugent.be>
Link: https://lore.kernel.org/r/20220223131954.6570-1-niels.dossche@ugent.be
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All other skbs allocated for TCP tx are using MAX_TCP_HEADER already.
MAX_HEADER can be too small for some cases (like eBPF based encapsulation),
so this can avoid extra pskb_expand_head() in lower stacks.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20220222031115.4005060-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch separate NS message allocation steps from ndisc_send_ns(),
so it could be used in other places, like bonding, to allocate and
send IPv6 NS message.
Also export ndisc_send_skb() and ndisc_ns_create() for later bonding usage.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We encounter a tcp drop issue in our cloud environment. Packet GROed in
host forwards to a VM virtio_net nic with net_failover enabled. VM acts
as a IPVS LB with ipip encapsulation. The full path like:
host gro -> vm virtio_net rx -> net_failover rx -> ipvs fullnat
-> ipip encap -> net_failover tx -> virtio_net tx
When net_failover transmits a ipip pkt (gso_type = 0x0103, which means
SKB_GSO_TCPV4, SKB_GSO_DODGY and SKB_GSO_IPXIP4), there is no gso
did because it supports TSO and GSO_IPXIP4. But network_header points to
inner ip header.
Call Trace:
tcp4_gso_segment ------> return NULL
inet_gso_segment ------> inner iph, network_header points to
ipip_gso_segment
inet_gso_segment ------> outer iph
skb_mac_gso_segment
Afterwards virtio_net transmits the pkt, only inner ip header is modified.
And the outer one just keeps unchanged. The pkt will be dropped in remote
host.
Call Trace:
inet_gso_segment ------> inner iph, outer iph is skipped
skb_mac_gso_segment
__skb_gso_segment
validate_xmit_skb
validate_xmit_skb_list
sch_direct_xmit
__qdisc_run
__dev_queue_xmit ------> virtio_net
dev_hard_start_xmit
__dev_queue_xmit ------> net_failover
ip_finish_output2
ip_output
iptunnel_xmit
ip_tunnel_xmit
ipip_tunnel_xmit ------> ipip
dev_hard_start_xmit
__dev_queue_xmit
ip_finish_output2
ip_output
ip_forward
ip_rcv
__netif_receive_skb_one_core
netif_receive_skb_internal
napi_gro_receive
receive_buf
virtnet_poll
net_rx_action
The root cause of this issue is specific with the rare combination of
SKB_GSO_DODGY and a tunnel device that adds an SKB_GSO_ tunnel option.
SKB_GSO_DODGY is set from external virtio_net. We need to reset network
header when callbacks.gso_segment() returns NULL.
This patch also includes ipv6_gso_segment(), considering SIT, etc.
Fixes: cb32f511a7 ("ipip: add GSO/TSO support")
Signed-off-by: Tao Liu <thomas.liu@ucloud.cn>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace kfree_skb() used in tcp_v4_do_rcv() and tcp_v6_do_rcv() with
kfree_skb_reason().
Reviewed-by: Mengen Sun <mengensun@tencent.com>
Reviewed-by: Hao Peng <flyingpeng@tencent.com>
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pass the address of drop_reason to tcp_add_backlog() to store the
reasons for skb drops when fails. Following drop reasons are
introduced:
SKB_DROP_REASON_SOCKET_BACKLOG
Reviewed-by: Mengen Sun <mengensun@tencent.com>
Reviewed-by: Hao Peng <flyingpeng@tencent.com>
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pass the address of drop reason to tcp_v4_inbound_md5_hash() and
tcp_v6_inbound_md5_hash() to store the reasons for skb drops when this
function fails. Therefore, the drop reason can be passed to
kfree_skb_reason() when the skb needs to be freed.
Following drop reasons are added:
SKB_DROP_REASON_TCP_MD5NOTFOUND
SKB_DROP_REASON_TCP_MD5UNEXPECTED
SKB_DROP_REASON_TCP_MD5FAILURE
SKB_DROP_REASON_TCP_MD5* above correspond to LINUX_MIB_TCPMD5*
Reviewed-by: Mengen Sun <mengensun@tencent.com>
Reviewed-by: Hao Peng <flyingpeng@tencent.com>
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace kfree_skb() used in tcp_v6_rcv() with kfree_skb_reason().
Reviewed-by: Mengen Sun <mengensun@tencent.com>
Reviewed-by: Hao Peng <flyingpeng@tencent.com>
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds support for MRT6MSG_WRMIFWHOLE which is used to pass
full packet and real vif id when the incoming interface is wrong.
While the RP and FHR are setting up state we need to be sending the
registers encapsulated with all the data inside otherwise we lose it.
The RP then decapsulates it and forwards it to the interested parties.
Currently with WRONGMIF we can only be sending empty register packets
and will lose that data.
This behaviour can be enabled by using MRT_PIM with
val == MRT6MSG_WRMIFWHOLE. This doesn't prevent MRT6MSG_WRONGMIF from
happening, it happens in addition to it, also it is controlled by the same
throttling parameters as WRONGMIF (i.e. 1 packet per 3 seconds currently).
Both messages are generated to keep backwards compatibily and avoid
breaking someone who was enabling MRT_PIM with val == 4, since any
positive val is accepted and treated the same.
Signed-off-by: Mobashshera Rasool <mobash.rasool.linux@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds a new protocol attribute to IPv4 and IPv6 addresses.
Inspiration was taken from the protocol attribute of routes. User space
applications like iproute2 can set/get the protocol with the Netlink API.
The attribute is stored as an 8-bit unsigned integer.
The protocol attribute is set by kernel for these categories:
- IPv4 and IPv6 loopback addresses
- IPv6 addresses generated from router announcements
- IPv6 link local addresses
User space may pass custom protocols, not defined by the kernel.
Grouping addresses on their origin is useful in scenarios where you want
to distinguish between addresses based on who added them, e.g. kernel
vs. user space.
Tagging addresses with a string label is an existing feature that could be
used as a solution. Unfortunately the max length of a label is
15 characters, and for compatibility reasons the label must be prefixed
with the name of the device followed by a colon. Since device names also
have a max length of 15 characters, only -1 characters is guaranteed to be
available for any origin tag, which is not that much.
A reference implementation of user space setting and getting protocols
is available for iproute2:
9a6ea18bd7
Signed-off-by: Jacques de Laval <Jacques.De.Laval@westermo.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20220217150202.80802-1-Jacques.De.Laval@westermo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
IPv6 has this hack changing sk->sk_prot when an IPv6 socket
is 'converted' to an IPv4 one with IPV6_ADDRFORM option.
This operation is only performed for TCP and UDP, knowing
their 'struct proto' for the two network families are populated
in the same way, and can not disappear while a reader
might use and dereference sk->sk_prot.
If we think about it all reads of sk->sk_prot while
either socket lock or RTNL is not acquired should be using READ_ONCE().
Also note that other layers like MPTCP, XFRM, CHELSIO_TLS also
write over sk->sk_prot.
BUG: KCSAN: data-race in inet6_recvmsg / ipv6_setsockopt
write to 0xffff8881386f7aa8 of 8 bytes by task 26932 on cpu 0:
do_ipv6_setsockopt net/ipv6/ipv6_sockglue.c:492 [inline]
ipv6_setsockopt+0x3758/0x3910 net/ipv6/ipv6_sockglue.c:1019
udpv6_setsockopt+0x85/0x90 net/ipv6/udp.c:1649
sock_common_setsockopt+0x5d/0x70 net/core/sock.c:3489
__sys_setsockopt+0x209/0x2a0 net/socket.c:2180
__do_sys_setsockopt net/socket.c:2191 [inline]
__se_sys_setsockopt net/socket.c:2188 [inline]
__x64_sys_setsockopt+0x62/0x70 net/socket.c:2188
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
read to 0xffff8881386f7aa8 of 8 bytes by task 26911 on cpu 1:
inet6_recvmsg+0x7a/0x210 net/ipv6/af_inet6.c:659
____sys_recvmsg+0x16c/0x320
___sys_recvmsg net/socket.c:2674 [inline]
do_recvmmsg+0x3f5/0xae0 net/socket.c:2768
__sys_recvmmsg net/socket.c:2847 [inline]
__do_sys_recvmmsg net/socket.c:2870 [inline]
__se_sys_recvmmsg net/socket.c:2863 [inline]
__x64_sys_recvmmsg+0xde/0x160 net/socket.c:2863
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
value changed: 0xffffffff85e0e980 -> 0xffffffff85e01580
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 26911 Comm: syz-executor.3 Not tainted 5.17.0-rc2-syzkaller-00316-g0457e5153e0e-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
UDP sendmsg() can be lockless, this is causing all kinds
of data races.
This patch converts sk->sk_tskey to remove one of these races.
BUG: KCSAN: data-race in __ip_append_data / __ip_append_data
read to 0xffff8881035d4b6c of 4 bytes by task 8877 on cpu 1:
__ip_append_data+0x1c1/0x1de0 net/ipv4/ip_output.c:994
ip_make_skb+0x13f/0x2d0 net/ipv4/ip_output.c:1636
udp_sendmsg+0x12bd/0x14c0 net/ipv4/udp.c:1249
inet_sendmsg+0x5f/0x80 net/ipv4/af_inet.c:819
sock_sendmsg_nosec net/socket.c:705 [inline]
sock_sendmsg net/socket.c:725 [inline]
____sys_sendmsg+0x39a/0x510 net/socket.c:2413
___sys_sendmsg net/socket.c:2467 [inline]
__sys_sendmmsg+0x267/0x4c0 net/socket.c:2553
__do_sys_sendmmsg net/socket.c:2582 [inline]
__se_sys_sendmmsg net/socket.c:2579 [inline]
__x64_sys_sendmmsg+0x53/0x60 net/socket.c:2579
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
write to 0xffff8881035d4b6c of 4 bytes by task 8880 on cpu 0:
__ip_append_data+0x1d8/0x1de0 net/ipv4/ip_output.c:994
ip_make_skb+0x13f/0x2d0 net/ipv4/ip_output.c:1636
udp_sendmsg+0x12bd/0x14c0 net/ipv4/udp.c:1249
inet_sendmsg+0x5f/0x80 net/ipv4/af_inet.c:819
sock_sendmsg_nosec net/socket.c:705 [inline]
sock_sendmsg net/socket.c:725 [inline]
____sys_sendmsg+0x39a/0x510 net/socket.c:2413
___sys_sendmsg net/socket.c:2467 [inline]
__sys_sendmmsg+0x267/0x4c0 net/socket.c:2553
__do_sys_sendmmsg net/socket.c:2582 [inline]
__se_sys_sendmmsg net/socket.c:2579 [inline]
__x64_sys_sendmmsg+0x53/0x60 net/socket.c:2579
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
value changed: 0x0000054d -> 0x0000054e
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 8880 Comm: syz-executor.5 Not tainted 5.17.0-rc2-syzkaller-00167-gdcb85f85fa6f-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Fixes: 09c2d251b7 ("net-timestamp: add key to disambiguate concurrent datagrams")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Before freeing the hash table in addrconf_exit_net(),
we need to make sure the work queue has completed,
or risk NULL dereference or UAF.
Thus, use cancel_delayed_work_sync() to enforce this.
We do not hold RTNL in addrconf_exit_net(), making this safe.
Fixes: 8805d13ff1 ("ipv6/addrconf: use one delayed work per netns")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20220216182037.3742-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Support setting IPV6_HOPLIMIT, IPV6_TCLASS, IPV6_DONTFRAG
during sendmsg via SOL_IPV6 cmsgs.
tclass and dontfrag are init'ed from struct ipv6_pinfo in
ipcm6_init_sk(), while hlimit is inited to -1, so we need
to handle it being populated via cmsg explicitly.
Leave extension headers and flowlabel unimplemented.
Those are slightly more laborious to test and users
seem to primarily care about IPV6_TCLASS.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ipv6 flowlabels historically require a reservation before use.
Optionally in exclusive mode (e.g., user-private).
Commit 59c820b231 ("ipv6: elide flowlabel check if no exclusive
leases exist") introduced a fastpath that avoids this check when no
exclusive leases exist in the system, and thus any flowlabel use
will be granted.
That allows skipping the control operation to reserve a flowlabel
entirely. Though with a warning if the fast path fails:
This is an optimization. Robust applications still have to revert to
requesting leases if the fast path fails due to an exclusive lease.
Still, this is subtle. Better isolate network namespaces from each
other. Flowlabels are per-netns. Also record per-netns whether
exclusive leases are in use. Then behavior does not change based on
activity in other netns.
Changes
v2
- wrap in IS_ENABLED(CONFIG_IPV6) to avoid breakage if disabled
Fixes: 59c820b231 ("ipv6: elide flowlabel check if no exclusive leases exist")
Link: https://lore.kernel.org/netdev/MWHPR2201MB1072BCCCFCE779E4094837ACD0329@MWHPR2201MB1072.namprd22.prod.outlook.com/
Reported-by: Congyu Liu <liu3101@purdue.edu>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Tested-by: Congyu Liu <liu3101@purdue.edu>
Link: https://lore.kernel.org/r/20220215160037.1976072-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Whenever rt6_uncached_list_flush_dev() swaps rt->rt6_idev
to the blackhole device, parts of IPv6 stack might still need
to increment one SNMP counter.
Root cause, patch from Ido, changelog from Eric :)
This bug suggests that we need to audit rt->rt6_idev usages
and make sure they are properly using RCU protection.
Fixes: e5f80fcf86 ("ipv6: give an IPv6 dev to blackhole_netdev")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add reasons to __udp6_lib_rcv for skb drops. The only twist is that the
NO_SOCKET takes precedence over the CSUM or other counters for that
path (motivation behind this patch - csum counter was misleading).
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Generate RTM_NEWROUTE netlink notification when the route preference
changes on an existing kernel generated default route in response to
RA messages. Currently netlink notifications are generated only when
this route is added or deleted but not when the route preference
changes, which can cause userspace routing application state to go
out of sync with kernel.
Signed-off-by: Kalash Nainwal <kalash@arista.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is an optimization to keep the per-cpu lists as short as possible:
Whenever rt6_uncached_list_flush_dev() changes one rt6_info
matching the disappearing device, it can can transfer the object
to a quarantine list, waiting for a final rt6_uncached_list_del().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
IPv6 addrconf notifiers wants the loopback device to
be the last device being dismantled at netns deletion.
This caused many limitations and work arounds.
Back in linux-5.3, Mahesh added a per host blackhole_netdev
that can be used whenever we need to make sure objects no longer
refer to a disappearing device.
If we attach to blackhole_netdev an ip6_ptr (allocate an idev),
then we can use this special device (which is never freed)
in place of the loopback_dev (which can be freed).
This will permit improvements in netdev_run_todo() and other parts
of the stack where had steps to make sure loopback_dev was
the last device to disappear.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This counter has never been visible, there is little point
trying to maintain it.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The ->rtm_tos option is normally used to route packets based on both
the destination address and the DS field. However it's ignored for
IPv6 routes. Setting ->rtm_tos for IPv6 is thus invalid as the route
is going to work only on the destination address anyway, so it won't
behave as specified.
Suggested-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Minor reordering of the code and a call to sock_cmsg_send()
gives us support for setting the common socket options via
cmsg (the usual ones - SO_MARK, SO_TIMESTAMPING_OLD, SCM_TXTIME).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nothing prevents the user from requesting timestamping
on ping6 sockets, yet timestamps are not going to be reported.
Plumb the flags through.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
We have ftrace and BPF today, there's no need for printing arguments
at the start of a function.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit
9652dc2eb9 ("tcp: relax listening_hash operations")
removed the need to disable bottom half while acquiring
listening_hash.lock. There are still two callers left which disable
bottom half before the lock is acquired.
On PREEMPT_RT the softirqs are preemptible and local_bh_disable() acts
as a lock to ensure that resources, that are protected by disabling
bottom halves, remain protected.
This leads to a circular locking dependency if the lock acquired with
disabled bottom halves is also acquired with enabled bottom halves
followed by disabling bottom halves. This is the reverse locking order.
It has been observed with inet_listen_hashbucket:🔒
local_bh_disable() + spin_lock(&ilb->lock):
inet_listen()
inet_csk_listen_start()
sk->sk_prot->hash() := inet_hash()
local_bh_disable()
__inet_hash()
spin_lock(&ilb->lock);
acquire(&ilb->lock);
Reverse order: spin_lock(&ilb2->lock) + local_bh_disable():
tcp_seq_next()
listening_get_next()
spin_lock(&ilb2->lock);
acquire(&ilb2->lock);
tcp4_seq_show()
get_tcp4_sock()
sock_i_ino()
read_lock_bh(&sk->sk_callback_lock);
acquire(softirq_ctrl) // <---- whoops
acquire(&sk->sk_callback_lock)
Drop local_bh_disable() around __inet_hash() which acquires
listening_hash->lock. Split inet_unhash() and acquire the
listen_hashbucket lock without disabling bottom halves; the inet_ehash
lock with disabled bottom halves.
Reported-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lkml.kernel.org/r/12d6f9879a97cd56c09fb53dee343cbb14f7f1f7.camel@gmx.de
Link: https://lkml.kernel.org/r/X9CheYjuXWc75Spa@hirez.programming.kicks-ass.net
Link: https://lore.kernel.org/r/YgQOebeZ10eNx1W6@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
cleanup_net() is competing with other rtnl users.
Avoiding to acquire rtnl for each netns before calling
ip6mr_rules_exit() gives chance for cleanup_net()
to progress much faster, holding rtnl a bit longer.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
cleanup_net() is competing with other rtnl users.
fib6_rules_net_exit() seems a good candidate for exit_batch(),
as this gives chance for cleanup_net() to progress much faster,
holding rtnl a bit longer.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
IPv6 does not scale very well with the number of IPv6 addresses.
It uses a global (shared by all netns) hash table with 256 buckets.
Some functions like addrconf_verify_rtnl() and addrconf_ifdown()
have to iterate all addresses in the hash table.
I have seen addrconf_verify_rtnl() holding the cpu for 10ms or more.
Switch to the per netns hashtable (and spinlock) added
in prior patches.
This considerably speeds up netns dismantle times on hosts
with thousands of netns. This also has an impact
on regular (fast path) IPv6 processing.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Next step for using per netns inet6_addr_lst
is to have per netns work item to ultimately
call addrconf_verify_rtnl() and addrconf_verify()
with a new 'struct net*' argument.
Everything is still using the global inet6_addr_lst[] table.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a per netns hash table and a dedicated spinlock,
first step to get rid of the global inet6_addr_lst[] one.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Define a dscp_t type and its appropriate helpers that ensure ECN bits
are not taken into account when handling DSCP.
Use this new type to replace the tclass field of struct fib6_rule, so
that fib6-rules don't get influenced by ECN bits anymore.
Before this patch, fib6-rules didn't make any distinction between the
DSCP and ECN bits. Therefore, rules specifying a DSCP (tos or dsfield
options in iproute2) stopped working as soon a packets had at least one
of its ECN bits set (as a work around one could create four rules for
each DSCP value to match, one for each possible ECN value).
After this patch fib6-rules only compare the DSCP bits. ECN doesn't
influence the result anymore. Also, fib6-rules now must have the ECN
bits cleared or they will be rejected.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Acked-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In many cases, ip6mr_sk_done() is called while no ipmr socket
has been registered.
This removes 4 rtnl acquisitions per netns dismantle,
with following callers:
igmp6_net_exit(), tcpv6_net_exit(), ndisc_net_exit()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This fixes minor data-races in ip6_mc_input() and
batadv_mcast_mla_rtr_flags_softif_get_ipv6()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for the IOAM insertion frequency inside its lwtunnel output
function. This patch introduces a new (atomic) counter for packets,
based on which the algorithm will decide if IOAM should be added or not.
Default frequency is "1/1" (i.e., applied to all packets) for backward
compatibility. The iproute2 patch is ready and will be submitted as soon
as this one is accepted.
Previous iproute2 command:
ip -6 ro ad fc00::1/128 encap ioam6 [ mode ... ] ...
New iproute2 command:
ip -6 ro ad fc00::1/128 encap ioam6 [ freq k/n ] [ mode ... ] ...
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Inline a part of ipv6_fixup_options() to avoid extra overhead on
function call if opt is NULL.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
udpv6_sendmsg() doesn't need dst after calling ip6_make_skb(), so
instead of taking an additional reference inside ip6_setup_cork()
and releasing the initial one afterwards, we can hand over a reference
into ip6_make_skb() saving two atomics. The only other user of
ip6_setup_cork() is ip6_append_data() and it requires an extra
dst_hold().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
udpv6_sendmsg() first initialises an on-stack 88B struct flowi6 and then
copies it into cork, which is expensive. Avoid the copy in corkless case
by initialising on-stack cork->fl directly.
The main part is a couple of lines under !corkreq check. The rest
converts fl6 variable to be a pointer.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Another preparation patch. inet_cork_full already contains a field for
iflow, so we can avoid passing a separate struct iflow6 into
__ip6_append_data() and ip6_make_skb(), and use the flow stored in
inet_cork_full. Make sure callers set cork->fl, i.e. we init it in
ip6_append_data() and before calling ip6_make_skb().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert a struct inet_cork argument in __ip6_append_data() to struct
inet_cork_full. As one struct contains another inet_cork is still can
be accessed via ->base field. It's a preparation patch making further
changes a bit cleaner.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It doesn't appear there is any reason for ip6_cork_release() to zero
cork->fl, it'll be fully filled on next initialisation. This 88 bytes
memset accounts to 0.3-0.5% of total CPU cycles.
It's also needed in following patches and allows to remove an extar flow
copy in udp_v6_push_pending_frames().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
