Function gfs2_adjust_quota set variable err, then set it again to a
different value. This patch removes the redundant set.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
No need to set error = 0 since it's set further down.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
This patch looks more invasive than it is. It simply moves function
qdsb_put before qd_unlock, then changes qd_unlock to call it rather than
open coding it. Again, this reduces redundancy.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
This patch adds some new fields to the gfs2 status file in sysfs to aid
in debugging.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Function need_sync is supposed to determine if a qd element needs to be
synced. If the "change" (qd_change) is zero, it does not need to be
synced because there's literally no change in the value. Before this
patch need_sync returned false if value < 0. That should be <= 0.
This patch changes the check to <=.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
This patch simplifies function need_sync by eliminating a variable in
favor of just returning the appropriate value as soon as we know it.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Function gfs2_write_disk_quota checks if its write overflows onto
another page, and if so, does a second write. Before this patch it kept
two variables for this, but only one is needed. This patch simplifies
it by eliminating pg_oflow.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Function gfs2_write_buf_to_page uses variable done to exit its loop, but
it's unnecessary if we just code an infinite loop and exit when we need.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
This patch passes the superblock pointer to gfs2_write_buf_to_page so it
becomes more apparent it's dealing with the system quota file.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Like the previous patch, we now pass the superblock pointer to function
gfs2_write_disk_quota. This makes the code more understandable, since it
only operates on the quota inode.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Before this change function gfs2_adjust_quota's first parameter was an
gfs2_inode pointer. But it always pointed to the quota inode. Here we
switch that to pass the superblock pointer, sdp, so it is easier to read
the code and understand that it's only dealing with the quota inode.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Since patch 845802b112 function gfs2_write_buf_to_page checks if the
target inode is jdata or ordered. This function only operates on the
system quota file, which is always jdata, so the check for jdata is
useless. This patch removes it.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
This patch adds a new mount option quota=quiet which is the same as
quota=on but it suppresses gfs2 quota error messages.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Add the device name to the names of the gfs2_logd and gfs2_quotad kernel
threads to allow for easier identification.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Rename the "gfs_recovery" workqueue to "gfs2_recovery", and
gfs_recovery_wq to gfs2_recovery_wq.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Function gfs2_withdraw() tries to synchronize concurrent callers by
atomically setting the SDF_WITHDRAWN flag in the first caller, setting
the SDF_WITHDRAW_IN_PROG flag to indicate that a withdraw is in
progress, performing the actual withdraw, and clearing the
SDF_WITHDRAW_IN_PROG flag when done. All other callers wait for the
SDF_WITHDRAW_IN_PROG flag to be cleared before returning.
This leaves a small window in which callers can find the SDF_WITHDRAWN
flag set before the SDF_WITHDRAW_IN_PROG flag has been set, causing them
to return prematurely, before the withdraw has been completed.
Fix that by setting the SDF_WITHDRAWN and SDF_WITHDRAW_IN_PROG flags
atomically.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Immediately stop the logd and quotad kernel threads when a filesystem
withdraw is detected: those threads aren't doing anything useful after a
withdraw. (Depends on the extra logd and quotad task struct references
held since commit 7a109f383fa3 ("gfs2: Fix asynchronous thread
destruction").)
In addition, check for kthread_should_stop() in the wait condition in
gfs2_quotad() to stop immediately when kthread_stop() is called.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
The kernel threads are currently stopped and destroyed synchronously by
gfs2_make_fs_ro() and gfs2_put_super(), and asynchronously by
signal_our_withdraw(), with no synchronization, so the synchronous and
asynchronous contexts can race with each other.
First, when creating the kernel threads, take an extra task struct
reference so that the task struct won't go away immediately when they
terminate. This allows those kthreads to terminate immediately when
they're done rather than hanging around as zombies until they are reaped
by kthread_stop(). When kthread_stop() is called on a terminated
kthread, it will return immediately.
Second, in signal_our_withdraw(), once the SDF_JOURNAL_LIVE flag has
been cleared, wake up the logd and quotad wait queues instead of
stopping the logd and quotad kthreads. The kthreads are then expected
to terminate automatically within short time, but if they cannot, they
will not block the withdraw.
For example, if a user process and one of the kthread decide to withdraw
at the same time, only one of them will perform the actual withdraw and
the other will wait for it to be done. If the kthread ends up being the
one to wait, the withdrawing user process won't be able to stop it.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
[ 81.372851][ T5532] CPU: 1 PID: 5532 Comm: syz-executor.0 Not tainted 6.2.0-rc1-syzkaller-dirty #0
[ 81.382080][ T5532] Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/12/2023
[ 81.392343][ T5532] Call Trace:
[ 81.395654][ T5532] <TASK>
[ 81.398603][ T5532] dump_stack_lvl+0x1b1/0x290
[ 81.418421][ T5532] gfs2_assert_warn_i+0x19a/0x2e0
[ 81.423480][ T5532] gfs2_quota_cleanup+0x4c6/0x6b0
[ 81.428611][ T5532] gfs2_make_fs_ro+0x517/0x610
[ 81.457802][ T5532] gfs2_withdraw+0x609/0x1540
[ 81.481452][ T5532] gfs2_inode_refresh+0xb2d/0xf60
[ 81.506658][ T5532] gfs2_instantiate+0x15e/0x220
[ 81.511504][ T5532] gfs2_glock_wait+0x1d9/0x2a0
[ 81.516352][ T5532] do_sync+0x485/0xc80
[ 81.554943][ T5532] gfs2_quota_sync+0x3da/0x8b0
[ 81.559738][ T5532] gfs2_sync_fs+0x49/0xb0
[ 81.564063][ T5532] sync_filesystem+0xe8/0x220
[ 81.568740][ T5532] generic_shutdown_super+0x6b/0x310
[ 81.574112][ T5532] kill_block_super+0x79/0xd0
[ 81.578779][ T5532] deactivate_locked_super+0xa7/0xf0
[ 81.584064][ T5532] cleanup_mnt+0x494/0x520
[ 81.593753][ T5532] task_work_run+0x243/0x300
[ 81.608837][ T5532] exit_to_user_mode_loop+0x124/0x150
[ 81.614232][ T5532] exit_to_user_mode_prepare+0xb2/0x140
[ 81.619820][ T5532] syscall_exit_to_user_mode+0x26/0x60
[ 81.625287][ T5532] do_syscall_64+0x49/0xb0
[ 81.629710][ T5532] entry_SYSCALL_64_after_hwframe+0x63/0xcd
In this backtrace, gfs2_quota_sync() takes quota data references and
then calls do_sync(). Function do_sync() encounters filesystem
corruption and withdraws the filesystem, which (among other things) calls
gfs2_quota_cleanup(). Function gfs2_quota_cleanup() wrongly assumes
that nobody is holding any quota data references anymore, and destroys
all quota data objects. When gfs2_quota_sync() then resumes and
dereferences the quota data objects it is holding, those objects are no
longer there.
Function gfs2_quota_cleanup() deals with resource deallocation and can
easily be delayed until gfs2_put_super() in the case of a filesystem
withdraw. In fact, most of the other work gfs2_make_fs_ro() does is
unnecessary during a withdraw as well, so change signal_our_withdraw()
to skip gfs2_make_fs_ro() and perform the necessary steps directly
instead.
Thanks to Edward Adam Davis <eadavis@sina.com> for the initial patches.
Link: https://lore.kernel.org/all/0000000000002b5e2405f14e860f@google.com
Reported-by: syzbot+3f6a670108ce43356017@syzkaller.appspotmail.com
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
In gfs2_quota_cleanup(), wait for the quota data objects to be freed
before returning. Otherwise, there is no guarantee that the quota data
objects will be gone when their kmem cache is destroyed.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Fix the refcount of quota data objects created directly by
gfs2_quota_init(): those are placed into the in-memory quota "database"
for eventual syncing to the main quota file, but they are not actively
held and should thus have an initial refcount of 0.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Once a filesystem is withdrawn, don't complain about quota changes
that can't be synced to the main quota file anymore.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Rename gfs2_qd_dispose() to gfs2_qd_dispose_list(). Move some code
duplicated in gfs2_qd_dispose_list() and gfs2_quota_cleanup() into a
new gfs2_qd_dispose() function.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Change gfs2_quota_cleanup() to move the quota data objects to dispose of
on a dispose list and call gfs2_qd_dispose() on that list, like
gfs2_qd_shrink_scan() does, instead of disposing of the quota data
objects directly.
This may look a bit pointless by itself, but it will make more sense in
combination with a fix that follows.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Function gfs2_qd_isolate must only return LRU_REMOVED when removing the
item from the lru list; otherwise, the number of items on the list will
go wrong.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Rename the SDF_DEACTIVATING flag to SDF_KILL to make it more obvious
that this relates to the kill_sb filesystem operation.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Rename sd_glock_wait to sd_kill_wait: we'll use it for other things
related to "killing" a filesystem on unmount soon (kill_sb).
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Before this patch many of the functions in quota.c got their superblock
pointer, sdp, from the quota_data's glock pointer. That's silly because
the qd already has its own pointer to the superblock (qd_sbd).
This patch changes references to use that instead, eliminating a level
of indirection.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Commit f07b352021 ("GFS2: Made logd daemon take into account log
demand") changed gfs2_ail_flush_reqd() and gfs2_jrnl_flush_reqd() to
take sd_log_blks_needed into account, but the checks in
gfs2_log_commit() were not updated correspondingly.
Once that is fixed, gfs2_jrnl_flush_reqd() and gfs2_ail_flush_reqd() can
be used in gfs2_log_commit(). Make those two helpers available to
gfs2_log_commit() by defining them above gfs2_log_commit().
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
When quotad detects an I/O error, it sets sd_log_error and then it wakes
up logd to withdraw the filesystem. However, logd doesn't wake up when
sd_log_error is set. Fix that.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
First, function gfs2_ail_flush_reqd checks the SDF_FORCE_AIL_FLUSH flag
to determine if an AIL flush should be forced in low-memory situations.
However, it also immediately clears the flag, and when called repeatedly
as in function gfs2_logd, the flag will be lost. Fix that by pulling
the SDF_FORCE_AIL_FLUSH flag check out of gfs2_ail_flush_reqd.
Second, function gfs2_writepages sets the SDF_FORCE_AIL_FLUSH flag
whether or not enough pages were written. If enough pages could be
written, flushing the AIL is unnecessary, though.
Third, gfs2_writepages doesn't wake up logd after setting the
SDF_FORCE_AIL_FLUSH flag, so it can take a long time for logd to react.
It would be preferable to wake up logd, but that hurts the performance
of some workloads and we don't quite understand why so far, so don't
wake up logd so far.
Fixes: b066a4eebd ("gfs2: forcibly flush ail to relieve memory pressure")
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Consider the following case:
1. A glock is held in shared mode.
2. A process requests the glock in exclusive mode (rename).
3. Before the lock is granted, more processes (read / ls) request the
glock in shared mode again.
4. gfs2 sends a request to dlm for the lock in exclusive mode because
that holder is at the head of the queue.
5. Somehow the dlm request gets canceled, so dlm sends us back a
response with state == LM_ST_SHARED and LM_OUT_CANCELED. So at that
point, the glock is still held in shared mode.
6. finish_xmote gets called to process the response from dlm. It detects
that the glock is not in the requested mode and no demote is in
progress, so it moves the canceled holder to the tail of the queue
and finds the new holder at the head of the queue. That holder is
requesting the glock in shared mode.
7. finish_xmote calls do_xmote to transition the glock into shared mode,
but the glock is already in shared mode and so do_xmote complains
about that with:
GLOCK_BUG_ON(gl, gl->gl_state == gl->gl_target);
Instead, in finish_xmote, after moving the canceled holder to the tail
of the queue, check if any new holders can be granted. Only call
do_xmote to repeat the dlm request if the holder at the head of the
queue is requesting the glock in a mode that is incompatible with the
mode the glock is currently held in.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
The last user of this flag was removed in commit b77b4a4815 ("gfs2:
Rework freeze / thaw logic").
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Revert the rest of commit 220cca2a4f ("GFS2: Change truncate page
allocation to be GFP_NOFS"):
In gfs2_unstuff_dinode(), there is no need to carry out the page cache
allocation under GFP_NOFS because inodes on the "regular" filesystem are
never un-inlined under memory pressure, so switch back from
find_or_create_page() to grab_cache_page() here as well.
Inodes on the "metadata" filesystem can theoretically be un-inlined
under memory pressure, but any page cache allocations in that context
would happen in GFP_NOFS context because those inodes have
inode->i_mapping->gfp_mask set to GFP_NOFS (see the previous patch).
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Set mapping->gfp mask to GFP_NOFS for all metadata inodes so that
allocating pages in the address space of those inodes won't call back
into the filesystem. This allows to switch back from
find_or_create_page() to grab_cache_page() in two places.
Partially reverts commit 220cca2a4f ("GFS2: Change truncate page
allocation to be GFP_NOFS").
Thanks to Dan Carpenter <dan.carpenter@linaro.org> for pointing out a
Smatch static checker warning.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Simplify code pattern of 'folio->index + folio_nr_pages(folio)' by using
the existing helper folio_next_index().
Signed-off-by: Minjie Du <duminjie@vivo.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Starting with patch 2cb1e08985, gfs2 started using the new function
filemap_splice_read rather than the old (and subsequently deleted)
function generic_file_splice_read.
filemap_splice_read works by taking references to a number of folios in
the page cache and splicing those folios into a pipe. The folios are
then read from the pipe and the folio references are dropped. This can
take an arbitrary amount of time. We cannot allow that in gfs2 because
those folio references will pin the inode glock to the node and prevent
it from being demoted, which can lead to cluster-wide deadlocks.
Instead, use copy_splice_read.
(In addition, the old generic_file_splice_read called into ->read_iter,
which called gfs2_file_read_iter, which took the inode glock during the
operation. The new filemap_splice_read interface does not take the
inode glock anymore. This is fixable, but it still wouldn't prevent
cluster-wide deadlocks.)
Fixes: 2cb1e08985 ("splice: Use filemap_splice_read() instead of generic_file_splice_read()")
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Function gfs2_trans_add_meta() checks for the SDF_FROZEN flag to make
sure that no buffers are added to a transaction while the filesystem is
frozen. With the recent freeze/thaw rework, the SDF_FROZEN flag is
cleared after thaw_super() is called, which is sufficient for
serializing freeze/thaw.
However, other filesystem operations started after thaw_super() may now
be calling gfs2_trans_add_meta() before the SDF_FROZEN flag is cleared,
which will trigger the SDF_FROZEN check in gfs2_trans_add_meta(). Fix
that by checking the s_writers.frozen state instead.
In addition, make sure not to call gfs2_assert_withdraw() with the
sd_log_lock spin lock held. Check for a withdrawn filesystem before
checking for a frozen filesystem, and don't pin/add buffers to the
current transaction in case of a failure in either case.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
- Move the freeze/thaw logic from glock callback context to process /
worker thread context to prevent deadlocks.
- Fix a quota reference couting bug in do_qc().
- Carry on deallocating inodes even when gfs2_rindex_update() fails.
- Retry filesystem-internal reads when they are interruped by a signal.
- Eliminate kmap_atomic() in favor of kmap_local_page() /
memcpy_{from,to}_page().
- Get rid of noop_direct_IO.
- And a few more minor fixes and cleanups.
-----BEGIN PGP SIGNATURE-----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=GKxj
-----END PGP SIGNATURE-----
Merge tag 'gfs2-v6.4-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 updates from Andreas Gruenbacher:
- Move the freeze/thaw logic from glock callback context to process /
worker thread context to prevent deadlocks
- Fix a quota reference couting bug in do_qc()
- Carry on deallocating inodes even when gfs2_rindex_update() fails
- Retry filesystem-internal reads when they are interruped by a signal
- Eliminate kmap_atomic() in favor of kmap_local_page() /
memcpy_{from,to}_page()
- Get rid of noop_direct_IO
- And a few more minor fixes and cleanups
* tag 'gfs2-v6.4-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: (23 commits)
gfs2: Add quota_change type
gfs2: Use memcpy_{from,to}_page where appropriate
gfs2: Convert remaining kmap_atomic calls to kmap_local_page
gfs2: Replace deprecated kmap_atomic with kmap_local_page
gfs: Get rid of unnucessary locking in inode_go_dump
gfs2: gfs2_freeze_lock_shared cleanup
gfs2: Replace sd_freeze_state with SDF_FROZEN flag
gfs2: Rework freeze / thaw logic
gfs2: Rename SDF_{FS_FROZEN => FREEZE_INITIATOR}
gfs2: Reconfiguring frozen filesystem already rejected
gfs2: Rename gfs2_freeze_lock{ => _shared }
gfs2: Rename the {freeze,thaw}_super callbacks
gfs2: Rename remaining "transaction" glock references
gfs2: retry interrupted internal reads
gfs2: Fix possible data races in gfs2_show_options()
gfs2: Fix duplicate should_fault_in_pages() call
gfs2: set FMODE_CAN_ODIRECT instead of a dummy direct_IO method
gfs2: Don't remember delete unless it's successful
gfs2: Update rl_unlinked before releasing rgrp lock
gfs2: Fix gfs2_qa_get imbalance in gfs2_quota_hold
...
Function do_qc has two main uses: (1) to re-sync the local quota changes
(qd) to the master quotas, and (2) normal quota changes. In the case of
normal quota changes, the change can be positive or negative, as the
quota usage goes up and down.
Before this patch function do_qc was distinguishing one from another by
whether the resulting value is or isn't zero: In the case of a re-sync
(called do_sync) the quota value is moved from the temporary value to a
master value, so the amount is added to one and subtracted from the
other. The problem is that since the values can be positive or negative
we can occasionally run into situations where we are not doing a re-sync
but the quota change just happens to cancel out the previous value.
In the case of a re-sync extra references and locks are taken, and so
do_qc needs to release them. In the case of a normal quota change, no
extra references and locks are taken, so it must not try to release
them.
The problem is: if the quota change is not a re-sync but the value just
happens to cancel out the original quota change, the resulting zero
value fools do_qc into thinking this is a re-sync and therefore it must
release the extra references. This results in problems, mainly having to
do with slot reference numbers going smaller than zero.
This patch introduces new constants, QC_SYNC and QC_CHANGE so do_qc can
really tell the difference. For QC_SYNC calls it must release the extra
references acquired by gfs2_quota_unlock's call to qd_check_sync. For
QC_CHANGE calls it does not have extra references to put.
Note that this allows quota changes back to a value of zero, and so I
removed an assert warning related to that.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Replace kmap_local_page() + memcpy() + kunmap_local() sequences with
memcpy_{from,to}_page() where we are not doing anything else with the
mapped page.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Replace the remaining instances of kmap_atomic() ... kunmap_atomic()
with kmap_local_page() ... kunmap_local().
In gfs2_write_buf_to_page(), we can call flush_dcache_page() after
unmapping the page.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
kmap_atomic() is deprecated in favor of kmap_local_{folio,page}().
Therefore, replace kmap_atomic() with kmap_local_page() in
gfs2_internal_read() and stuffed_readpage().
kmap_atomic() disables page-faults and preemption (the latter only for
!PREEMPT_RT kernels), However, the code within the mapping/un-mapping in
gfs2_internal_read() and stuffed_readpage() does not depend on the
above-mentioned side effects.
Therefore, a mere replacement of the old API with the new one is all that
is required (i.e., there is no need to explicitly add any calls to
pagefault_disable() and/or preempt_disable()).
Signed-off-by: Deepak R Varma <drv@mailo.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Commit 27a2660f1e ("gfs2: Dump nrpages for inodes and their glocks")
added some locking around reading inode->i_data.nrpages. That locking
doesn't do anything really, so get rid of it.
With that, the glock argument to ->go_dump() can be made const again as
well.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
All the remaining users of gfs2_freeze_lock_shared() set freeze_gh to
&sdp->sd_freeze_gh and flags to 0, so remove those two parameters.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Replace sd_freeze_state with a new SDF_FROZEN flag.
There no longer is a need for indicating that a freeze is in progress
(SDF_STARTING_FREEZE); we are now protecting the critical sections with
the sd_freeze_mutex.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
