We have a cross dependency between KVM and VFIO when using
s390 vfio_pci_zdev extensions for PCI passthrough
To be able to keep both subsystem modular we add a registering
hook inside the S390 core code.
This fixes a build problem when VFIO is built-in and KVM is built
as a module.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Fixes: 09340b2fca ("KVM: s390: pci: add routines to start/stop interpretive execution")
Cc: <stable@vger.kernel.org>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Link: https://lore.kernel.org/r/20220819122945.9309-1-pmorel@linux.ibm.com
Message-Id: <20220819122945.9309-1-pmorel@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
If a source file has the same name as a module then kbuild only supports
a single source file in the module.
Rename vfio.c to vfio_main.c so that we can have more that one .c file
in vfio.ko.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20220731125503.142683-5-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
- Cleanup use of extern in function prototypes (Alex Williamson)
- Simplify bus_type usage and convert to device IOMMU interfaces
(Robin Murphy)
- Check missed return value and fix comment typos (Bo Liu)
- Split migration ops from device ops and fix races in mlx5 migration
support (Yishai Hadas)
- Fix missed return value check in noiommu support (Liam Ni)
- Hardening to clear buffer pointer to avoid use-after-free (Schspa Shi)
- Remove requirement that only the same mm can unmap a previously
mapped range (Li Zhe)
- Adjust semaphore release vs device open counter (Yi Liu)
- Remove unused arg from SPAPR support code (Deming Wang)
- Rework vfio-ccw driver to better fit new mdev framework (Eric Farman,
Michael Kawano)
- Replace DMA unmap notifier with callbacks (Jason Gunthorpe)
- Clarify SPAPR support comment relative to iommu_ops (Alexey Kardashevskiy)
- Revise page pinning API towards compatibility with future iommufd support
(Nicolin Chen)
- Resolve issues in vfio-ccw, including use of DMA unmap callback
(Eric Farman)
-----BEGIN PGP SIGNATURE-----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=4BE8
-----END PGP SIGNATURE-----
Merge tag 'vfio-v6.0-rc1' of https://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson:
- Cleanup use of extern in function prototypes (Alex Williamson)
- Simplify bus_type usage and convert to device IOMMU interfaces (Robin
Murphy)
- Check missed return value and fix comment typos (Bo Liu)
- Split migration ops from device ops and fix races in mlx5 migration
support (Yishai Hadas)
- Fix missed return value check in noiommu support (Liam Ni)
- Hardening to clear buffer pointer to avoid use-after-free (Schspa
Shi)
- Remove requirement that only the same mm can unmap a previously
mapped range (Li Zhe)
- Adjust semaphore release vs device open counter (Yi Liu)
- Remove unused arg from SPAPR support code (Deming Wang)
- Rework vfio-ccw driver to better fit new mdev framework (Eric Farman,
Michael Kawano)
- Replace DMA unmap notifier with callbacks (Jason Gunthorpe)
- Clarify SPAPR support comment relative to iommu_ops (Alexey
Kardashevskiy)
- Revise page pinning API towards compatibility with future iommufd
support (Nicolin Chen)
- Resolve issues in vfio-ccw, including use of DMA unmap callback (Eric
Farman)
* tag 'vfio-v6.0-rc1' of https://github.com/awilliam/linux-vfio: (40 commits)
vfio/pci: fix the wrong word
vfio/ccw: Check return code from subchannel quiesce
vfio/ccw: Remove FSM Close from remove handlers
vfio/ccw: Add length to DMA_UNMAP checks
vfio: Replace phys_pfn with pages for vfio_pin_pages()
vfio/ccw: Add kmap_local_page() for memcpy
vfio: Rename user_iova of vfio_dma_rw()
vfio/ccw: Change pa_pfn list to pa_iova list
vfio/ap: Change saved_pfn to saved_iova
vfio: Pass in starting IOVA to vfio_pin/unpin_pages API
vfio/ccw: Only pass in contiguous pages
vfio/ap: Pass in physical address of ind to ap_aqic()
drm/i915/gvt: Replace roundup with DIV_ROUND_UP
vfio: Make vfio_unpin_pages() return void
vfio/spapr_tce: Fix the comment
vfio: Replace the iommu notifier with a device list
vfio: Replace the DMA unmapping notifier with a callback
vfio/ccw: Move FSM open/close to MDEV open/close
vfio/ccw: Refactor vfio_ccw_mdev_reset
vfio/ccw: Create a CLOSE FSM event
...
* Unwinder implementations for both nVHE modes (classic and
protected), complete with an overflow stack
* Rework of the sysreg access from userspace, with a complete
rewrite of the vgic-v3 view to allign with the rest of the
infrastructure
* Disagregation of the vcpu flags in separate sets to better track
their use model.
* A fix for the GICv2-on-v3 selftest
* A small set of cosmetic fixes
RISC-V:
* Track ISA extensions used by Guest using bitmap
* Added system instruction emulation framework
* Added CSR emulation framework
* Added gfp_custom flag in struct kvm_mmu_memory_cache
* Added G-stage ioremap() and iounmap() functions
* Added support for Svpbmt inside Guest
s390:
* add an interface to provide a hypervisor dump for secure guests
* improve selftests to use TAP interface
* enable interpretive execution of zPCI instructions (for PCI passthrough)
* First part of deferred teardown
* CPU Topology
* PV attestation
* Minor fixes
x86:
* Permit guests to ignore single-bit ECC errors
* Intel IPI virtualization
* Allow getting/setting pending triple fault with KVM_GET/SET_VCPU_EVENTS
* PEBS virtualization
* Simplify PMU emulation by just using PERF_TYPE_RAW events
* More accurate event reinjection on SVM (avoid retrying instructions)
* Allow getting/setting the state of the speaker port data bit
* Refuse starting the kvm-intel module if VM-Entry/VM-Exit controls are inconsistent
* "Notify" VM exit (detect microarchitectural hangs) for Intel
* Use try_cmpxchg64 instead of cmpxchg64
* Ignore benign host accesses to PMU MSRs when PMU is disabled
* Allow disabling KVM's "MONITOR/MWAIT are NOPs!" behavior
* Allow NX huge page mitigation to be disabled on a per-vm basis
* Port eager page splitting to shadow MMU as well
* Enable CMCI capability by default and handle injected UCNA errors
* Expose pid of vcpu threads in debugfs
* x2AVIC support for AMD
* cleanup PIO emulation
* Fixes for LLDT/LTR emulation
* Don't require refcounted "struct page" to create huge SPTEs
* Miscellaneous cleanups:
** MCE MSR emulation
** Use separate namespaces for guest PTEs and shadow PTEs bitmasks
** PIO emulation
** Reorganize rmap API, mostly around rmap destruction
** Do not workaround very old KVM bugs for L0 that runs with nesting enabled
** new selftests API for CPUID
Generic:
* Fix races in gfn->pfn cache refresh; do not pin pages tracked by the cache
* new selftests API using struct kvm_vcpu instead of a (vm, id) tuple
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmLnyo4UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMtQQf/XjVWiRcWLPR9dqzRM/vvRXpiG+UL
jU93R7m6ma99aqTtrxV/AE+kHgamBlma3Cwo+AcWk9uCVNbIhFjv2YKg6HptKU0e
oJT3zRYp+XIjEo7Kfw+TwroZbTlG6gN83l1oBLFMqiFmHsMLnXSI2mm8MXyi3dNB
vR2uIcTAl58KIprqNNsYJ2dNn74ogOMiXYx9XzoA9/5Xb6c0h4rreHJa5t+0s9RO
Gz7Io3PxumgsbJngjyL1Ve5oxhlIAcZA8DU0PQmjxo3eS+k6BcmavGFd45gNL5zg
iLpCh4k86spmzh8CWkAAwWPQE4dZknK6jTctJc0OFVad3Z7+X7n0E8TFrA==
=PM8o
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"Quite a large pull request due to a selftest API overhaul and some
patches that had come in too late for 5.19.
ARM:
- Unwinder implementations for both nVHE modes (classic and
protected), complete with an overflow stack
- Rework of the sysreg access from userspace, with a complete rewrite
of the vgic-v3 view to allign with the rest of the infrastructure
- Disagregation of the vcpu flags in separate sets to better track
their use model.
- A fix for the GICv2-on-v3 selftest
- A small set of cosmetic fixes
RISC-V:
- Track ISA extensions used by Guest using bitmap
- Added system instruction emulation framework
- Added CSR emulation framework
- Added gfp_custom flag in struct kvm_mmu_memory_cache
- Added G-stage ioremap() and iounmap() functions
- Added support for Svpbmt inside Guest
s390:
- add an interface to provide a hypervisor dump for secure guests
- improve selftests to use TAP interface
- enable interpretive execution of zPCI instructions (for PCI
passthrough)
- First part of deferred teardown
- CPU Topology
- PV attestation
- Minor fixes
x86:
- Permit guests to ignore single-bit ECC errors
- Intel IPI virtualization
- Allow getting/setting pending triple fault with
KVM_GET/SET_VCPU_EVENTS
- PEBS virtualization
- Simplify PMU emulation by just using PERF_TYPE_RAW events
- More accurate event reinjection on SVM (avoid retrying
instructions)
- Allow getting/setting the state of the speaker port data bit
- Refuse starting the kvm-intel module if VM-Entry/VM-Exit controls
are inconsistent
- "Notify" VM exit (detect microarchitectural hangs) for Intel
- Use try_cmpxchg64 instead of cmpxchg64
- Ignore benign host accesses to PMU MSRs when PMU is disabled
- Allow disabling KVM's "MONITOR/MWAIT are NOPs!" behavior
- Allow NX huge page mitigation to be disabled on a per-vm basis
- Port eager page splitting to shadow MMU as well
- Enable CMCI capability by default and handle injected UCNA errors
- Expose pid of vcpu threads in debugfs
- x2AVIC support for AMD
- cleanup PIO emulation
- Fixes for LLDT/LTR emulation
- Don't require refcounted "struct page" to create huge SPTEs
- Miscellaneous cleanups:
- MCE MSR emulation
- Use separate namespaces for guest PTEs and shadow PTEs bitmasks
- PIO emulation
- Reorganize rmap API, mostly around rmap destruction
- Do not workaround very old KVM bugs for L0 that runs with nesting enabled
- new selftests API for CPUID
Generic:
- Fix races in gfn->pfn cache refresh; do not pin pages tracked by
the cache
- new selftests API using struct kvm_vcpu instead of a (vm, id)
tuple"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (606 commits)
selftests: kvm: set rax before vmcall
selftests: KVM: Add exponent check for boolean stats
selftests: KVM: Provide descriptive assertions in kvm_binary_stats_test
selftests: KVM: Check stat name before other fields
KVM: x86/mmu: remove unused variable
RISC-V: KVM: Add support for Svpbmt inside Guest/VM
RISC-V: KVM: Use PAGE_KERNEL_IO in kvm_riscv_gstage_ioremap()
RISC-V: KVM: Add G-stage ioremap() and iounmap() functions
KVM: Add gfp_custom flag in struct kvm_mmu_memory_cache
RISC-V: KVM: Add extensible CSR emulation framework
RISC-V: KVM: Add extensible system instruction emulation framework
RISC-V: KVM: Factor-out instruction emulation into separate sources
RISC-V: KVM: move preempt_disable() call in kvm_arch_vcpu_ioctl_run
RISC-V: KVM: Make kvm_riscv_guest_timer_init a void function
RISC-V: KVM: Fix variable spelling mistake
RISC-V: KVM: Improve ISA extension by using a bitmap
KVM, x86/mmu: Fix the comment around kvm_tdp_mmu_zap_leafs()
KVM: SVM: Dump Virtual Machine Save Area (VMSA) to klog
KVM: x86/mmu: Treat NX as a valid SPTE bit for NPT
KVM: x86: Do not block APIC write for non ICR registers
...
New driver:
- logicvc
vfio:
- use aperture API
core:
- of: Add data-lane helpers and convert drivers
- connector: Remove deprecated ida_simple_get()
media:
- Add various RGB666 and RGB888 format constants
panel:
- Add HannStar HSD101PWW
- Add ETML0700Y5DHA
dma-buf:
- add sync-file API
- set dma mask for udmabuf devices
fbcon:
- Improve scrolling performance
- Sanitize input
fbdev:
- device unregistering fixes
- vesa: Support COMPILE_TEST
- Disable firmware-device registration when first native driver loads
aperture:
- fix segfault during hot-unplug
- export for use with other subsystems
client:
- use driver validated modes
dp:
- aux: make probing more reliable
- mst: Read extended DPCD capabilities during system resume
- Support waiting for HDP signal
- Port-validation fixes
edid:
- CEA data-block iterators
- struct drm_edid introduction
- implement HF-EEODB extension
gem:
- don't use fb format non-existing planes
probe-helper:
- use 640x480 as displayport fallback
scheduler:
- don't kill jobs in interrupt context
bridge:
- Add support for i.MX8qxp and i.MX8qm
- lots of fixes/cleanups
- Add TI-DLPC3433
- fy07024di26a30d: Optional GPIO reset
- ldb: Add reg and reg-name properties to bindings, Kconfig fixes
- lt9611: Fix display sensing;
- tc358767: DSI/DPI refactoring and DSI-to-eDP support, DSI lane handling
- tc358775: Fix clock settings
- ti-sn65dsi83: Allow GPIO to sleep
- adv7511: I2C fixes
- anx7625: Fix error handling; DPI fixes; Implement HDP timeout via callback
- fsl-ldb: Drop DE flip
- ti-sn65dsi86: Convert to atomic modesetting
amdgpu:
- use atomic fence helpers in DM
- fix VRAM address calculations
- export CRTC bpc via debugfs
- Initial devcoredump support
- Enable high priority gfx queue on asics which support it
- Adjust GART size on newer APUs for S/G display
- Soft reset for GFX 11 / SDMA 6
- Add gfxoff status query for vangogh
- Fix timestamps for cursor only commits
- Adjust GART size on newer APUs for S/G display
- fix buddy memory corruption
amdkfd:
- MMU notifier fixes
- P2P DMA support using dma-buf
- Add available memory IOCTL
- HMM profiler support
- Simplify GPUVM validation
- Unified memory for CWSR save/restore area
i915:
- General driver clean-up
- DG2 enabling (still under force probe)
- DG2 small BAR memory support
- HuC loading support
- DG2 workarounds
- DG2/ATS-M device IDs added
- Ponte Vecchio prep work and new blitter engines
- add Meteorlake support
- Fix sparse warnings
- DMC MMIO range checks
- Audio related fixes
- Runtime PM fixes
- PSR fixes
- Media freq factor and per-gt enhancements
- DSI fixes for ICL+
- Disable DMC flip queue handlers
- ADL_P voltage swing updates
- Use more the VBT for panel information
- Fix on Type-C ports with TBT mode
- Improve fastset and allow seamless M/N changes
- Accept more fixed modes with VRR/DMRRS panels
- Disable connector polling for a headless SKU
- ADL-S display PLL w/a
- Enable THP on Icelake and beyond
- Fix i915_gem_object_ggtt_pin_ww regression on old platforms
- Expose per tile media freq factor in sysfs
- Fix dma_resv fence handling in multi-batch execbuf
- Improve on suspend / resume time with VT-d enabled
- export CRTC bpc settings via debugfs
msm:
- gpu: a619 support
- gpu: Fix for unclocked GMU register access
- gpu: Devcore dump enhancements
- client utilization via fdinfo support
- fix fence rollover issue
- gem: Lockdep false-positive warning fix
- gem: Switch to pfn mappings
- WB support on sc7180
- dp: dropped custom bulk clock implementation
- fix link retraining on resolution change
- hdmi: dropped obsolete GPIO support
tegra:
- context isolation for host1x engines
- tegra234 soc support
mediatek:
- add vdosys0/1 for mt8195
- add MT8195 dp_intf driver
exynos:
- Fix resume function issue of exynos decon driver by calling
clk_disable_unprepare() properly if clk_prepare_enable() failed.
nouveau:
- set of misc fixes/cleanups
- display cleanups
gma500:
- Cleanup connector I2C handling
hyperv:
- Unify VRAM allocation of Gen1 and Gen2
meson:
- Support YUV422 output; Refcount fixes
mgag200:
- Support damage clipping
- Support gamma handling
- Protect concurrent HW access
- Fixes to connector
- Store model-specific limits in device-info structure
- fix PCI register init
panfrost:
- Valhall support
r128:
- Fix bit-shift overflow
rockchip:
- Locking fixes in error path
ssd130x:
- Fix built-in linkage
udl:
- Always advertize VGA connector
ast:
- Support multiple outputs
- fix black screen on resume
sun4i:
- HDMI PHY cleanups
vc4:
- Add support for BCM2711
vkms:
- Allocate output buffer with vmalloc()
mcde:
- Fix ref-count leak
mxsfb/lcdif:
- Support i.MX8MP LCD controller
stm/ltdc:
- Support dynamic Z order
- Support mirroring
ingenic:
- Fix display at maximum resolution
-----BEGIN PGP SIGNATURE-----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=HQ9U
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2022-08-03' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"Highlights:
- New driver for logicvc - which is a display IP core.
- EDID parser rework to add new extensions
- fbcon scrolling improvements
- i915 has some more DG2 work but not enabled by default, but should
have enough features for userspace to work now.
Otherwise it's lots of work all over the place. Detailed summary:
New driver:
- logicvc
vfio:
- use aperture API
core:
- of: Add data-lane helpers and convert drivers
- connector: Remove deprecated ida_simple_get()
media:
- Add various RGB666 and RGB888 format constants
panel:
- Add HannStar HSD101PWW
- Add ETML0700Y5DHA
dma-buf:
- add sync-file API
- set dma mask for udmabuf devices
fbcon:
- Improve scrolling performance
- Sanitize input
fbdev:
- device unregistering fixes
- vesa: Support COMPILE_TEST
- Disable firmware-device registration when first native driver loads
aperture:
- fix segfault during hot-unplug
- export for use with other subsystems
client:
- use driver validated modes
dp:
- aux: make probing more reliable
- mst: Read extended DPCD capabilities during system resume
- Support waiting for HDP signal
- Port-validation fixes
edid:
- CEA data-block iterators
- struct drm_edid introduction
- implement HF-EEODB extension
gem:
- don't use fb format non-existing planes
probe-helper:
- use 640x480 as displayport fallback
scheduler:
- don't kill jobs in interrupt context
bridge:
- Add support for i.MX8qxp and i.MX8qm
- lots of fixes/cleanups
- Add TI-DLPC3433
- fy07024di26a30d: Optional GPIO reset
- ldb: Add reg and reg-name properties to bindings, Kconfig fixes
- lt9611: Fix display sensing;
- tc358767: DSI/DPI refactoring and DSI-to-eDP support, DSI lane handling
- tc358775: Fix clock settings
- ti-sn65dsi83: Allow GPIO to sleep
- adv7511: I2C fixes
- anx7625: Fix error handling; DPI fixes; Implement HDP timeout via callback
- fsl-ldb: Drop DE flip
- ti-sn65dsi86: Convert to atomic modesetting
amdgpu:
- use atomic fence helpers in DM
- fix VRAM address calculations
- export CRTC bpc via debugfs
- Initial devcoredump support
- Enable high priority gfx queue on asics which support it
- Adjust GART size on newer APUs for S/G display
- Soft reset for GFX 11 / SDMA 6
- Add gfxoff status query for vangogh
- Fix timestamps for cursor only commits
- Adjust GART size on newer APUs for S/G display
- fix buddy memory corruption
amdkfd:
- MMU notifier fixes
- P2P DMA support using dma-buf
- Add available memory IOCTL
- HMM profiler support
- Simplify GPUVM validation
- Unified memory for CWSR save/restore area
i915:
- General driver clean-up
- DG2 enabling (still under force probe)
- DG2 small BAR memory support
- HuC loading support
- DG2 workarounds
- DG2/ATS-M device IDs added
- Ponte Vecchio prep work and new blitter engines
- add Meteorlake support
- Fix sparse warnings
- DMC MMIO range checks
- Audio related fixes
- Runtime PM fixes
- PSR fixes
- Media freq factor and per-gt enhancements
- DSI fixes for ICL+
- Disable DMC flip queue handlers
- ADL_P voltage swing updates
- Use more the VBT for panel information
- Fix on Type-C ports with TBT mode
- Improve fastset and allow seamless M/N changes
- Accept more fixed modes with VRR/DMRRS panels
- Disable connector polling for a headless SKU
- ADL-S display PLL w/a
- Enable THP on Icelake and beyond
- Fix i915_gem_object_ggtt_pin_ww regression on old platforms
- Expose per tile media freq factor in sysfs
- Fix dma_resv fence handling in multi-batch execbuf
- Improve on suspend / resume time with VT-d enabled
- export CRTC bpc settings via debugfs
msm:
- gpu: a619 support
- gpu: Fix for unclocked GMU register access
- gpu: Devcore dump enhancements
- client utilization via fdinfo support
- fix fence rollover issue
- gem: Lockdep false-positive warning fix
- gem: Switch to pfn mappings
- WB support on sc7180
- dp: dropped custom bulk clock implementation
- fix link retraining on resolution change
- hdmi: dropped obsolete GPIO support
tegra:
- context isolation for host1x engines
- tegra234 soc support
mediatek:
- add vdosys0/1 for mt8195
- add MT8195 dp_intf driver
exynos:
- Fix resume function issue of exynos decon driver by calling
clk_disable_unprepare() properly if clk_prepare_enable() failed.
nouveau:
- set of misc fixes/cleanups
- display cleanups
gma500:
- Cleanup connector I2C handling
hyperv:
- Unify VRAM allocation of Gen1 and Gen2
meson:
- Support YUV422 output; Refcount fixes
mgag200:
- Support damage clipping
- Support gamma handling
- Protect concurrent HW access
- Fixes to connector
- Store model-specific limits in device-info structure
- fix PCI register init
panfrost:
- Valhall support
r128:
- Fix bit-shift overflow
rockchip:
- Locking fixes in error path
ssd130x:
- Fix built-in linkage
udl:
- Always advertize VGA connector
ast:
- Support multiple outputs
- fix black screen on resume
sun4i:
- HDMI PHY cleanups
vc4:
- Add support for BCM2711
vkms:
- Allocate output buffer with vmalloc()
mcde:
- Fix ref-count leak
mxsfb/lcdif:
- Support i.MX8MP LCD controller
stm/ltdc:
- Support dynamic Z order
- Support mirroring
ingenic:
- Fix display at maximum resolution"
* tag 'drm-next-2022-08-03' of git://anongit.freedesktop.org/drm/drm: (1480 commits)
drm/amd/display: Fix a compilation failure on PowerPC caused by FPU code
drm/amdgpu: enable support for psp 13.0.4 block
drm/amdgpu: add files for PSP 13.0.4
drm/amdgpu: add header files for MP 13.0.4
drm/amdgpu: correct RLC_RLCS_BOOTLOAD_STATUS offset and index
drm/amdgpu: send msg to IMU for the front-door loading
drm/amdkfd: use time_is_before_jiffies(a + b) to replace "jiffies - a > b"
drm/amdgpu: fix hive reference leak when reflecting psp topology info
drm/amd/pm: enable GFX ULV feature support for SMU13.0.0
drm/amd/pm: update driver if header for SMU 13.0.0
drm/amdgpu: move mes self test after drm sched re-started
drm/amdgpu: drop non-necessary call trace dump
drm/amdgpu: enable VCN cg and JPEG cg/pg
drm/amdgpu: vcn_4_0_2 video codec query
drm/amdgpu: add VCN_4_0_2 firmware support
drm/amdgpu: add VCN function in NBIO v7.7
drm/amdgpu: fix a vcn4 boot poll bug in emulation mode
drm/amd/amdgpu: add memory training support for PSP_V13
drm/amdkfd: remove an unnecessary amdgpu_bo_ref
drm/amd/pm: Add get_gfx_off_status interface for yellow carp
...
magical no_llseek thing and makes checks consistent. In particular,
ad-hoc "can we do splice via internal pipe" checks got saner (and
somewhat more permissive, which is what Jason had been after, AFAICT)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCYug2xgAKCRBZ7Krx/gZQ
6wxWAQDqeg+xMq2FGPXmgjCa+Cp3PXH96Lp6f3hHzakIDx+t8gEAxvuiXAD22Mct
6S1SKuGj0iDIuM4L7hUiWTiY/bDXSAc=
=3EC/
-----END PGP SIGNATURE-----
Merge tag 'pull-work.lseek' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs lseek updates from Al Viro:
"Jason's lseek series.
Saner handling of 'lseek should fail with ESPIPE' - this gets rid of
the magical no_llseek thing and makes checks consistent.
In particular, the ad-hoc "can we do splice via internal pipe" checks
got saner (and somewhat more permissive, which is what Jason had been
after, AFAICT)"
* tag 'pull-work.lseek' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: remove no_llseek
fs: check FMODE_LSEEK to control internal pipe splicing
vfio: do not set FMODE_LSEEK flag
dma-buf: remove useless FMODE_LSEEK flag
fs: do not compare against ->llseek
fs: clear or set FMODE_LSEEK based on llseek function
KVM/s390, KVM/x86 and common infrastructure changes for 5.20
x86:
* Permit guests to ignore single-bit ECC errors
* Fix races in gfn->pfn cache refresh; do not pin pages tracked by the cache
* Intel IPI virtualization
* Allow getting/setting pending triple fault with KVM_GET/SET_VCPU_EVENTS
* PEBS virtualization
* Simplify PMU emulation by just using PERF_TYPE_RAW events
* More accurate event reinjection on SVM (avoid retrying instructions)
* Allow getting/setting the state of the speaker port data bit
* Refuse starting the kvm-intel module if VM-Entry/VM-Exit controls are inconsistent
* "Notify" VM exit (detect microarchitectural hangs) for Intel
* Cleanups for MCE MSR emulation
s390:
* add an interface to provide a hypervisor dump for secure guests
* improve selftests to use TAP interface
* enable interpretive execution of zPCI instructions (for PCI passthrough)
* First part of deferred teardown
* CPU Topology
* PV attestation
* Minor fixes
Generic:
* new selftests API using struct kvm_vcpu instead of a (vm, id) tuple
x86:
* Use try_cmpxchg64 instead of cmpxchg64
* Bugfixes
* Ignore benign host accesses to PMU MSRs when PMU is disabled
* Allow disabling KVM's "MONITOR/MWAIT are NOPs!" behavior
* x86/MMU: Allow NX huge pages to be disabled on a per-vm basis
* Port eager page splitting to shadow MMU as well
* Enable CMCI capability by default and handle injected UCNA errors
* Expose pid of vcpu threads in debugfs
* x2AVIC support for AMD
* cleanup PIO emulation
* Fixes for LLDT/LTR emulation
* Don't require refcounted "struct page" to create huge SPTEs
x86 cleanups:
* Use separate namespaces for guest PTEs and shadow PTEs bitmasks
* PIO emulation
* Reorganize rmap API, mostly around rmap destruction
* Do not workaround very old KVM bugs for L0 that runs with nesting enabled
* new selftests API for CPUID
Most of the callers of vfio_pin_pages() want "struct page *" and the
low-level mm code to pin pages returns a list of "struct page *" too.
So there's no gain in converting "struct page *" to PFN in between.
Replace the output parameter "phys_pfn" list with a "pages" list, to
simplify callers. This also allows us to replace the vfio_iommu_type1
implementation with a more efficient one.
And drop the pfn_valid check in the gvt code, as there is no need to
do such a check at a page-backed struct page pointer.
For now, also update vfio_iommu_type1 to fit this new parameter too.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Eric Farman <farman@linux.ibm.com>
Tested-by: Terrence Xu <terrence.xu@intel.com>
Tested-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/20220723020256.30081-11-nicolinc@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Following the updated vfio_pin/unpin_pages(), use the simpler "iova".
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Terrence Xu <terrence.xu@intel.com>
Tested-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/20220723020256.30081-9-nicolinc@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The vfio_pin/unpin_pages() so far accepted arrays of PFNs of user IOVA.
Among all three callers, there was only one caller possibly passing in
a non-contiguous PFN list, which is now ensured to have contiguous PFN
inputs too.
Pass in the starting address with "iova" alone to simplify things, so
callers no longer need to maintain a PFN list or to pin/unpin one page
at a time. This also allows VFIO to use more efficient implementations
of pin/unpin_pages.
For now, also update vfio_iommu_type1 to fit this new parameter too,
while keeping its input intact (being user_iova) since we don't want
to spend too much effort swapping its parameters and local variables
at that level.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Acked-by: Eric Farman <farman@linux.ibm.com>
Tested-by: Terrence Xu <terrence.xu@intel.com>
Tested-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/20220723020256.30081-6-nicolinc@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
There's only one caller that checks its return value with a WARN_ON_ONCE,
while all other callers don't check the return value at all. Above that,
an undo function should not fail. So, simplify the API to return void by
embedding similar WARN_ONs.
Also for users to pinpoint which condition fails, separate WARN_ON lines,
yet remove the "driver->ops->unpin_pages" check, since it's unreasonable
for callers to unpin on something totally random that wasn't even pinned.
And remove NULL pointer checks for they would trigger oops vs. warnings.
Note that npage is already validated in the vfio core, thus drop the same
check in the type1 code.
Suggested-by: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Tested-by: Terrence Xu <terrence.xu@intel.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/20220723020256.30081-2-nicolinc@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Grepping for "iommu_ops" finds this spot and gives wrong impression
that iommu_ops is used in here, fix the comment.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Link: https://lore.kernel.org/r/20220714080912.3713509-1-aik@ozlabs.ru
[aw: convert to multi-line comment]
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Instead of bouncing the function call to the driver op through a blocking
notifier just have the iommu layer call it directly.
Register each device that is being attached to the iommu with the lower
driver which then threads them on a linked list and calls the appropriate
driver op at the right time.
Currently the only use is if dma_unmap() is defined.
Also, fully lock all the debugging tests on the pinning path that a
dma_unmap is registered.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/2-v4-681e038e30fd+78-vfio_unmap_notif_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Instead of having drivers register the notifier with explicit code just
have them provide a dma_unmap callback op in their driver ops and rely on
the core code to wire it up.
Suggested-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/1-v4-681e038e30fd+78-vfio_unmap_notif_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This file does not support llseek, so don't set the flag advertising it.
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
When doing load/store interpretation, the maximum store block length is
determined by the underlying firmware, not the host kernel API. Reflect
that in the associated Query PCI Function Group clp capability and let
userspace decide which is appropriate to present to the guest.
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Link: https://lore.kernel.org/r/20220606203325.110625-20-mjrosato@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
The function handle is a system-wide unique identifier for a zPCI
device. With zPCI instruction interpretation, the host will no
longer be executing the zPCI instructions on behalf of the guest.
As a result, the guest needs to use the real function handle in
order for firmware to associate the instruction with the proper
PCI function. Let's provide that handle to the guest.
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Link: https://lore.kernel.org/r/20220606203325.110625-19-mjrosato@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
During vfio-pci open_device, pass the KVM associated with the vfio group
(if one exists). This is needed in order to pass a special indicator
(GISA) to firmware to allow zPCI interpretation facilities to be used
for only the specific KVM associated with the vfio-pci device. During
vfio-pci close_device, unregister the notifier.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Link: https://lore.kernel.org/r/20220606203325.110625-18-mjrosato@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
The current contents of vfio-pci-zdev are today only useful in a KVM
environment; let's tie everything currently under vfio-pci-zdev to
this Kconfig statement and require KVM in this case, reducing complexity
(e.g. symbol lookups).
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Link: https://lore.kernel.org/r/20220606203325.110625-11-mjrosato@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
The parameter of container has been unused for tce_iommu_unuse_page.
So, we should delete it.
Signed-off-by: Deming Wang <wangdeming@inspur.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Link: https://lore.kernel.org/r/20220702064613.5293-1-wangdeming@inspur.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The test isn't going to work if a group doesn't exist. Normally this isn't
a problem since VFIO isn't going to create a device if there is no group,
but the special CONFIG_VFIO_NOIOMMU behavior allows bypassing this
prevention. The new cap test effectively forces a group and breaks this
config option.
Move the cap test to vfio_group_find_or_alloc() which is the earliest time
we know we have a group available and thus are not running in noiommu mode.
Fixes: e8ae0e140c ("vfio: Require that devices support DMA cache coherence")
Reported-by: Xiang Chen <chenxiang66@hisilicon.com>
Tested-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/0-v1-e8934b490f36+f4-vfio_cap_fix_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
We do not protect the vfio_device::open_count with group_rwsem elsewhere (see
vfio_device_fops_release as a comparison, where we already drop group_rwsem
before open_count--). So move the group_rwsem unlock prior to open_count--.
This change now also drops group_rswem before setting device->kvm = NULL,
but that's also OK (again, just like vfio_device_fops_release). The setting
of device->kvm before open_device is technically done while holding the
group_rwsem, this is done to protect the group kvm value we are copying from,
and we should not be relying on that to protect the contents of device->kvm;
instead we assume this value will not change until after the device is closed
and while under the dev_set->lock.
Cc: Matthew Rosato <mjrosato@linux.ibm.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20220627074119.523274-1-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
In function vfio_dma_do_unmap(), we currently prevent process to unmap
vfio dma region whose mm_struct is different from the vfio_dma->task.
In our virtual machine scenario which is using kvm and qemu, this
judgement stops us from liveupgrading our qemu, which uses fork() &&
exec() to load the new binary but the new process cannot do the
VFIO_IOMMU_UNMAP_DMA action during vm exit because of this judgement.
This judgement is added in commit 8f0d5bb95f ("vfio iommu type1: Add
task structure to vfio_dma") for the security reason. But it seems that
no other task who has no family relationship with old and new process
can get the same vfio_dma struct here for the reason of resource
isolation. So this patch delete it.
Signed-off-by: Li Zhe <lizhe.67@bytedance.com>
Reviewed-by: Jason Gunthorpe <jgg@ziepe.ca>
Link: https://lore.kernel.org/r/20220627035109.73745-1-lizhe.67@bytedance.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
On buffer resize failure, vfio_info_cap_add() will free the buffer,
report zero for the size, and return -ENOMEM. As additional
hardening, also clear the buffer pointer to prevent any chance of a
double free.
Signed-off-by: Schspa Shi <schspa@gmail.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Link: https://lore.kernel.org/r/20220629022948.55608-1-schspa@gmail.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
As iommu_group_set_name() can fail, we should check the return value.
Signed-off-by: Liam Ni <zhiguangni01@gmail.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20220625114239.9301-1-zhiguangni01@gmail.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
vfio core checks whether the driver sets some migration op (e.g.
set_state/get_state) and accordingly calls its op.
However, currently mlx5 driver sets the above ops without regards to its
migration caps.
This might lead to unexpected usage/Oops if user space may call to the
above ops even if the driver doesn't support migration. As for example,
the migration state_mutex is not initialized in that case.
The cleanest way to manage that seems to split the migration ops from
the main device ops, this will let the driver setting them separately
from the main ops when it's applicable.
As part of that, validate ops construction on registration and include a
check for VFIO_MIGRATION_STOP_COPY since the uAPI claims it must be set
in migration_flags.
HISI driver was changed as well to match this scheme.
This scheme may enable down the road to come with some extra group of
ops (e.g. DMA log) that can be set without regards to the other options
based on driver caps.
Fixes: 6fadb02126 ("vfio/mlx5: Implement vfio_pci driver for mlx5 devices")
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20220628155910.171454-3-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Protect mlx5vf_disable_fds() upon close device to be called under the
state mutex as done in all other places.
This will prevent a race with any other flow which calls
mlx5vf_disable_fds() as of health/recovery upon
MLX5_PF_NOTIFY_DISABLE_VF event.
Encapsulate this functionality in a separate function named
mlx5vf_cmd_close_migratable() to consider migration caps and for further
usage upon close device.
Fixes: 6fadb02126 ("vfio/mlx5: Implement vfio_pci driver for mlx5 devices")
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20220628155910.171454-2-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
As vfio_register_iommu_driver() can fail, we should check the return value.
Signed-off-by: Bo Liu <liubo03@inspur.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Link: https://lore.kernel.org/r/20220622045651.5416-1-liubo03@inspur.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Use the new interface to check the capabilities for our device
specifically.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/4ea5eb64246f1ee188d1a61c3e93b37756932eb7.1656092606.git.robin.murphy@arm.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Since IOMMU groups are mandatory for drivers to support, it stands to
reason that any device which has been successfully added to a group
must be on a bus supported by that IOMMU driver, and therefore a domain
viable for any device in the group must be viable for all devices in
the group. This already has to be the case for the IOMMU API's internal
default domain, for instance. Thus even if the group contains devices on
different buses, that can only mean that the IOMMU driver actually
supports such an odd topology, and so without loss of generality we can
expect the bus type of any device in a group to be suitable for IOMMU
API calls.
Furthermore, scrutiny reveals a lack of protection for the bus being
removed while vfio_iommu_type1_attach_group() is using it; the reference
that VFIO holds on the iommu_group ensures that data remains valid, but
does not prevent the group's membership changing underfoot.
We can address both concerns by recycling vfio_bus_type() into some
superficially similar logic to indirect the IOMMU API calls themselves.
Each call is thus protected from races by the IOMMU group's own locking,
and we no longer need to hold group-derived pointers beyond that scope.
It also gives us an easy path for the IOMMU API's migration of bus-based
interfaces to device-based, of which we can already take the first step
with device_iommu_capable(). As with domains, any capability must in
practice be consistent for devices in a given group - and after all it's
still the same capability which was expected to be consistent across an
entire bus! - so there's no need for any complicated validation.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/194a12d3434d7b38f84fa96503c7664451c8c395.1656092606.git.robin.murphy@arm.com
[aw: add comment to vfio_iommu_device_capable()]
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The use of 'extern' in function prototypes has been disrecommended in
the kernel coding style for several years now, remove them from all vfio
related files so contributors no longer need to decide between style and
consistency.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/165471414407.203056.474032786990662279.stgit@omen
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Console drivers can create conflicts with PCI resources resulting in
userspace getting mmap failures to memory BARs. This is especially
evident when trying to re-use the system primary console for userspace
drivers. Use the aperture helpers to remove these conflicts.
v3:
* call aperture_remove_conflicting_pci_devices()
Reported-by: Laszlo Ersek <lersek@redhat.com>
Suggested-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220622140134.12763-4-tzimmermann@suse.de
- Improvements to mlx5 vfio-pci variant driver, including support
for parallel migration per PF (Yishai Hadas)
- Remove redundant iommu_present() check (Robin Murphy)
- Ongoing refactoring to consolidate the VFIO driver facing API
to use vfio_device (Jason Gunthorpe)
- Use drvdata to store vfio_device among all vfio-pci and variant
drivers (Jason Gunthorpe)
- Remove redundant code now that IOMMU core manages group DMA
ownership (Jason Gunthorpe)
- Remove vfio_group from external API handling struct file ownership
(Jason Gunthorpe)
- Correct typo in uapi comments (Thomas Huth)
- Fix coccicheck detected deadlock (Wan Jiabing)
- Use rwsem to remove races and simplify code around container and
kvm association to groups (Jason Gunthorpe)
- Harden access to devices in low power states and use runtime PM to
enable d3cold support for unused devices (Abhishek Sahu)
- Fix dma_owner handling of fake IOMMU groups (Jason Gunthorpe)
- Set driver_managed_dma on vfio-pci variant drivers (Jason Gunthorpe)
- Pass KVM pointer directly rather than via notifier (Matthew Rosato)
-----BEGIN PGP SIGNATURE-----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=etEI
-----END PGP SIGNATURE-----
Merge tag 'vfio-v5.19-rc1' of https://github.com/awilliam/linux-vfio
Pull vfio updates from Alex Williamson:
- Improvements to mlx5 vfio-pci variant driver, including support for
parallel migration per PF (Yishai Hadas)
- Remove redundant iommu_present() check (Robin Murphy)
- Ongoing refactoring to consolidate the VFIO driver facing API to use
vfio_device (Jason Gunthorpe)
- Use drvdata to store vfio_device among all vfio-pci and variant
drivers (Jason Gunthorpe)
- Remove redundant code now that IOMMU core manages group DMA ownership
(Jason Gunthorpe)
- Remove vfio_group from external API handling struct file ownership
(Jason Gunthorpe)
- Correct typo in uapi comments (Thomas Huth)
- Fix coccicheck detected deadlock (Wan Jiabing)
- Use rwsem to remove races and simplify code around container and kvm
association to groups (Jason Gunthorpe)
- Harden access to devices in low power states and use runtime PM to
enable d3cold support for unused devices (Abhishek Sahu)
- Fix dma_owner handling of fake IOMMU groups (Jason Gunthorpe)
- Set driver_managed_dma on vfio-pci variant drivers (Jason Gunthorpe)
- Pass KVM pointer directly rather than via notifier (Matthew Rosato)
* tag 'vfio-v5.19-rc1' of https://github.com/awilliam/linux-vfio: (38 commits)
vfio: remove VFIO_GROUP_NOTIFY_SET_KVM
vfio/pci: Add driver_managed_dma to the new vfio_pci drivers
vfio: Do not manipulate iommu dma_owner for fake iommu groups
vfio/pci: Move the unused device into low power state with runtime PM
vfio/pci: Virtualize PME related registers bits and initialize to zero
vfio/pci: Change the PF power state to D0 before enabling VFs
vfio/pci: Invalidate mmaps and block the access in D3hot power state
vfio: Change struct vfio_group::container_users to a non-atomic int
vfio: Simplify the life cycle of the group FD
vfio: Fully lock struct vfio_group::container
vfio: Split up vfio_group_get_device_fd()
vfio: Change struct vfio_group::opened from an atomic to bool
vfio: Add missing locking for struct vfio_group::kvm
kvm/vfio: Fix potential deadlock problem in vfio
include/uapi/linux/vfio.h: Fix trivial typo - _IORW should be _IOWR instead
vfio/pci: Use the struct file as the handle not the vfio_group
kvm/vfio: Remove vfio_group from kvm
vfio: Change vfio_group_set_kvm() to vfio_file_set_kvm()
vfio: Change vfio_external_check_extension() to vfio_file_enforced_coherent()
vfio: Remove vfio_external_group_match_file()
...
Including:
- Intel VT-d driver updates
- Domain force snooping improvement.
- Cleanups, no intentional functional changes.
- ARM SMMU driver updates
- Add new Qualcomm device-tree compatible strings
- Add new Nvidia device-tree compatible string for Tegra234
- Fix UAF in SMMUv3 shared virtual addressing code
- Force identity-mapped domains for users of ye olde SMMU
legacy binding
- Minor cleanups
- Patches to fix a BUG_ON in the vfio_iommu_group_notifier
- Groundwork for upcoming iommufd framework
- Introduction of DMA ownership so that an entire IOMMU group
is either controlled by the kernel or by user-space
- MT8195 and MT8186 support in the Mediatek IOMMU driver
- Patches to make forcing of cache-coherent DMA more coherent
between IOMMU drivers
- Fixes for thunderbolt device DMA protection
- Various smaller fixes and cleanups
-----BEGIN PGP SIGNATURE-----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=W0hj
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- Intel VT-d driver updates:
- Domain force snooping improvement.
- Cleanups, no intentional functional changes.
- ARM SMMU driver updates:
- Add new Qualcomm device-tree compatible strings
- Add new Nvidia device-tree compatible string for Tegra234
- Fix UAF in SMMUv3 shared virtual addressing code
- Force identity-mapped domains for users of ye olde SMMU legacy
binding
- Minor cleanups
- Fix a BUG_ON in the vfio_iommu_group_notifier:
- Groundwork for upcoming iommufd framework
- Introduction of DMA ownership so that an entire IOMMU group is
either controlled by the kernel or by user-space
- MT8195 and MT8186 support in the Mediatek IOMMU driver
- Make forcing of cache-coherent DMA more coherent between IOMMU
drivers
- Fixes for thunderbolt device DMA protection
- Various smaller fixes and cleanups
* tag 'iommu-updates-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (88 commits)
iommu/amd: Increase timeout waiting for GA log enablement
iommu/s390: Tolerate repeat attach_dev calls
iommu/vt-d: Remove hard coding PGSNP bit in PASID entries
iommu/vt-d: Remove domain_update_iommu_snooping()
iommu/vt-d: Check domain force_snooping against attached devices
iommu/vt-d: Block force-snoop domain attaching if no SC support
iommu/vt-d: Size Page Request Queue to avoid overflow condition
iommu/vt-d: Fold dmar_insert_one_dev_info() into its caller
iommu/vt-d: Change return type of dmar_insert_one_dev_info()
iommu/vt-d: Remove unneeded validity check on dev
iommu/dma: Explicitly sort PCI DMA windows
iommu/dma: Fix iova map result check bug
iommu/mediatek: Fix NULL pointer dereference when printing dev_name
iommu: iommu_group_claim_dma_owner() must always assign a domain
iommu/arm-smmu: Force identity domains for legacy binding
iommu/arm-smmu: Support Tegra234 SMMU
dt-bindings: arm-smmu: Add compatible for Tegra234 SOC
dt-bindings: arm-smmu: Document nvidia,memory-controller property
iommu/arm-smmu-qcom: Add SC8280XP support
dt-bindings: arm-smmu: Add compatible for Qualcomm SC8280XP
...
Rather than relying on a notifier for associating the KVM with
the group, let's assume that the association has already been
made prior to device_open. The first time a device is opened
associate the group KVM with the device.
This fixes a user-triggerable oops in GVT.
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Zhi Wang <zhi.a.wang@intel.com>
Link: https://lore.kernel.org/r/20220519183311.582380-2-mjrosato@linux.ibm.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
When the iommu series adding driver_managed_dma was rebased it missed that
new VFIO drivers were added and did not update them too.
Without this vfio will claim the groups are not viable.
Add driver_managed_dma to mlx5 and hisi.
Fixes: 70693f4708 ("vfio: Set DMA ownership for VFIO devices")
Reported-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/0-v1-f9dfa642fab0+2b3-vfio_managed_dma_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Since asserting dma ownership now causes the group to have its DMA blocked
the iommu layer requires a working iommu. This means the dma_owner APIs
cannot be used on the fake groups that VFIO creates. Test for this and
avoid calling them.
Otherwise asserting dma ownership will fail for VFIO mdev devices as a
BLOCKING iommu_domain cannot be allocated due to the NULL iommu ops.
Fixes: 0286300e60 ("iommu: iommu_group_claim_dma_owner() must always assign a domain")
Reported-by: Eric Farman <farman@linux.ibm.com>
Tested-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/0-v1-9cfc47edbcd4+13546-vfio_dma_owner_fix_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Currently, there is very limited power management support
available in the upstream vfio_pci_core based drivers. If there
are no users of the device, then the PCI device will be moved into
D3hot state by writing directly into PCI PM registers. This D3hot
state help in saving power but we can achieve zero power consumption
if we go into the D3cold state. The D3cold state cannot be possible
with native PCI PM. It requires interaction with platform firmware
which is system-specific. To go into low power states (including D3cold),
the runtime PM framework can be used which internally interacts with PCI
and platform firmware and puts the device into the lowest possible
D-States.
This patch registers vfio_pci_core based drivers with the
runtime PM framework.
1. The PCI core framework takes care of most of the runtime PM
related things. For enabling the runtime PM, the PCI driver needs to
decrement the usage count and needs to provide 'struct dev_pm_ops'
at least. The runtime suspend/resume callbacks are optional and needed
only if we need to do any extra handling. Now there are multiple
vfio_pci_core based drivers. Instead of assigning the
'struct dev_pm_ops' in individual parent driver, the vfio_pci_core
itself assigns the 'struct dev_pm_ops'. There are other drivers where
the 'struct dev_pm_ops' is being assigned inside core layer
(For example, wlcore_probe() and some sound based driver, etc.).
2. This patch provides the stub implementation of 'struct dev_pm_ops'.
The subsequent patch will provide the runtime suspend/resume
callbacks. All the config state saving, and PCI power management
related things will be done by PCI core framework itself inside its
runtime suspend/resume callbacks (pci_pm_runtime_suspend() and
pci_pm_runtime_resume()).
3. Inside pci_reset_bus(), all the devices in dev_set needs to be
runtime resumed. vfio_pci_dev_set_pm_runtime_get() will take
care of the runtime resume and its error handling.
4. Inside vfio_pci_core_disable(), the device usage count always needs
to be decremented which was incremented in vfio_pci_core_enable().
5. Since the runtime PM framework will provide the same functionality,
so directly writing into PCI PM config register can be replaced with
the use of runtime PM routines. Also, the use of runtime PM can help
us in more power saving.
In the systems which do not support D3cold,
With the existing implementation:
// PCI device
# cat /sys/bus/pci/devices/0000\:01\:00.0/power_state
D3hot
// upstream bridge
# cat /sys/bus/pci/devices/0000\:00\:01.0/power_state
D0
With runtime PM:
// PCI device
# cat /sys/bus/pci/devices/0000\:01\:00.0/power_state
D3hot
// upstream bridge
# cat /sys/bus/pci/devices/0000\:00\:01.0/power_state
D3hot
So, with runtime PM, the upstream bridge or root port will also go
into lower power state which is not possible with existing
implementation.
In the systems which support D3cold,
// PCI device
# cat /sys/bus/pci/devices/0000\:01\:00.0/power_state
D3hot
// upstream bridge
# cat /sys/bus/pci/devices/0000\:00\:01.0/power_state
D0
With runtime PM:
// PCI device
# cat /sys/bus/pci/devices/0000\:01\:00.0/power_state
D3cold
// upstream bridge
# cat /sys/bus/pci/devices/0000\:00\:01.0/power_state
D3cold
So, with runtime PM, both the PCI device and upstream bridge will
go into D3cold state.
6. If 'disable_idle_d3' module parameter is set, then also the runtime
PM will be enabled, but in this case, the usage count should not be
decremented.
7. vfio_pci_dev_set_try_reset() return value is unused now, so this
function return type can be changed to void.
8. Use the runtime PM API's in vfio_pci_core_sriov_configure().
The device can be in low power state either with runtime
power management (when there is no user) or PCI_PM_CTRL register
write by the user. In both the cases, the PF should be moved to
D0 state. For preventing any runtime usage mismatch, pci_num_vf()
has been called explicitly during disable.
Signed-off-by: Abhishek Sahu <abhsahu@nvidia.com>
Link: https://lore.kernel.org/r/20220518111612.16985-5-abhsahu@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
If any PME event will be generated by PCI, then it will be mostly
handled in the host by the root port PME code. For example, in the case
of PCIe, the PME event will be sent to the root port and then the PME
interrupt will be generated. This will be handled in
drivers/pci/pcie/pme.c at the host side. Inside this, the
pci_check_pme_status() will be called where PME_Status and PME_En bits
will be cleared. So, the guest OS which is using vfio-pci device will
not come to know about this PME event.
To handle these PME events inside guests, we need some framework so
that if any PME events will happen, then it needs to be forwarded to
virtual machine monitor. We can virtualize PME related registers bits
and initialize these bits to zero so vfio-pci device user will assume
that it is not capable of asserting the PME# signal from any power state.
Signed-off-by: Abhishek Sahu <abhsahu@nvidia.com>
Link: https://lore.kernel.org/r/20220518111612.16985-4-abhsahu@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
According to [PCIe v5 9.6.2] for PF Device Power Management States
"The PF's power management state (D-state) has global impact on its
associated VFs. If a VF does not implement the Power Management
Capability, then it behaves as if it is in an equivalent
power state of its associated PF.
If a VF implements the Power Management Capability, the Device behavior
is undefined if the PF is placed in a lower power state than the VF.
Software should avoid this situation by placing all VFs in lower power
state before lowering their associated PF's power state."
From the vfio driver side, user can enable SR-IOV when the PF is in D3hot
state. If VF does not implement the Power Management Capability, then
the VF will be actually in D3hot state and then the VF BAR access will
fail. If VF implements the Power Management Capability, then VF will
assume that its current power state is D0 when the PF is D3hot and
in this case, the behavior is undefined.
To support PF power management, we need to create power management
dependency between PF and its VF's. The runtime power management support
may help with this where power management dependencies are supported
through device links. But till we have such support in place, we can
disallow the PF to go into low power state, if PF has VF enabled.
There can be a case, where user first enables the VF's and then
disables the VF's. If there is no user of PF, then the PF can put into
D3hot state again. But with this patch, the PF will still be in D0
state after disabling VF's since detecting this case inside
vfio_pci_core_sriov_configure() requires access to
struct vfio_device::open_count along with its locks. But the subsequent
patches related to runtime PM will handle this case since runtime PM
maintains its own usage count.
Also, vfio_pci_core_sriov_configure() can be called at any time
(with and without vfio pci device user), so the power state change
and SR-IOV enablement need to be protected with the required locks.
Signed-off-by: Abhishek Sahu <abhsahu@nvidia.com>
Link: https://lore.kernel.org/r/20220518111612.16985-3-abhsahu@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
According to [PCIe v5 5.3.1.4.1] for D3hot state
"Configuration and Message requests are the only TLPs accepted by a
Function in the D3Hot state. All other received Requests must be
handled as Unsupported Requests, and all received Completions may
optionally be handled as Unexpected Completions."
Currently, if the vfio PCI device has been put into D3hot state and if
user makes non-config related read/write request in D3hot state, these
requests will be forwarded to the host and this access may cause
issues on a few systems.
This patch leverages the memory-disable support added in commit
'abafbc551fdd ("vfio-pci: Invalidate mmaps and block MMIO access on
disabled memory")' to generate page fault on mmap access and
return error for the direct read/write. If the device is D3hot state,
then the error will be returned for MMIO access. The IO access generally
does not make the system unresponsive so the IO access can still happen
in D3hot state. The default value should be returned in this case
without bringing down the complete system.
Also, the power related structure fields need to be protected so
we can use the same 'memory_lock' to protect these fields also.
This protection is mainly needed when user changes the PCI
power state by writing into PCI_PM_CTRL register.
vfio_lock_and_set_power_state() wrapper function will take the
required locks and then it will invoke the vfio_pci_set_power_state().
Signed-off-by: Abhishek Sahu <abhsahu@nvidia.com>
Link: https://lore.kernel.org/r/20220518111612.16985-2-abhsahu@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Now that everything is fully locked there is no need for container_users
to remain as an atomic, change it to an unsigned int.
Use 'if (group->container)' as the test to determine if the container is
present or not instead of using container_users.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/6-v2-d035a1842d81+1bf-vfio_group_locking_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Once userspace opens a group FD it is prevented from opening another
instance of that same group FD until all the prior group FDs and users of
the container are done.
The first is done trivially by checking the group->opened during group FD
open.
However, things get a little weird if userspace creates a device FD and
then closes the group FD. The group FD still cannot be re-opened, but this
time it is because the group->container is still set and container_users
is elevated by the device FD.
Due to this mismatched lifecycle we have the
vfio_group_try_dissolve_container() which tries to auto-free a container
after the group FD is closed but the device FD remains open.
Instead have the device FD hold onto a reference to the single group
FD. This directly prevents vfio_group_fops_release() from being called
when any device FD exists and makes the lifecycle model more
understandable.
vfio_group_try_dissolve_container() is removed as the only place a
container is auto-deleted is during vfio_group_fops_release(). At this
point the container_users is either 1 or 0 since all device FDs must be
closed.
Change group->opened to group->opened_file which points to the single
struct file * that is open for the group. If the group->open_file is
NULL then group->container == NULL.
If all device FDs have closed then the group's notifier list must be
empty.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/5-v2-d035a1842d81+1bf-vfio_group_locking_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This is necessary to avoid various user triggerable races, for instance
racing SET_CONTAINER/UNSET_CONTAINER:
ioctl(VFIO_GROUP_SET_CONTAINER)
ioctl(VFIO_GROUP_UNSET_CONTAINER)
vfio_group_unset_container
int users = atomic_cmpxchg(&group->container_users, 1, 0);
// users == 1 container_users == 0
__vfio_group_unset_container(group);
container = group->container;
vfio_group_set_container()
if (!atomic_read(&group->container_users))
down_write(&container->group_lock);
group->container = container;
up_write(&container->group_lock);
down_write(&container->group_lock);
group->container = NULL;
up_write(&container->group_lock);
vfio_container_put(container);
/* woops we lost/leaked the new container */
This can then go on to NULL pointer deref since container == 0 and
container_users == 1.
Wrap all touches of container, except those on a performance path with a
known open device, with the group_rwsem.
The only user of vfio_group_add_container_user() holds the user count for
a simple operation, change it to just hold the group_lock over the
operation and delete vfio_group_add_container_user(). Containers now only
gain a user when a device FD is opened.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/4-v2-d035a1842d81+1bf-vfio_group_locking_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The split follows the pairing with the destroy functions:
- vfio_group_get_device_fd() destroyed by close()
- vfio_device_open() destroyed by vfio_device_fops_release()
- vfio_device_assign_container() destroyed by
vfio_group_try_dissolve_container()
The next patch will put a lock around vfio_device_assign_container().
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/3-v2-d035a1842d81+1bf-vfio_group_locking_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
