Useful for diagnosing problems with metrics.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20211124001231.3277836-1-irogers@google.com
[ Fixed up perf_cpu conflict, i.e. we need to append ".cpu" to cpu__max_present_cpu() result ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Following Documentation/ABI/stable/sysfs-devices-system-cpu the
/sys/devices/system/cpu/cpuX/topology/core_cpus is deprecated in favor
of thread_siblings, so probe thread_siblings before falling back on
core_cpus.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20211124001231.3277836-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
strtoull can only read a 64-bit bitmap. On an AMD EPYC core_cpus may look
like:
00000000,00000000,00000000,00000001,00000000,00000000,00000000,00000001
and so the sibling wasn't spotted. Fix by writing a simple hweight string
parser.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20211124001231.3277836-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A common problem is confusing CPU map indices with the CPU, by wrapping
the CPU with a struct then this is avoided. This approach is similar to
atomic_t.
Committer notes:
To make it build with BUILD_BPF_SKEL=1 these files needed the
conversions to 'struct perf_cpu' usage:
tools/perf/util/bpf_counter.c
tools/perf/util/bpf_counter_cgroup.c
tools/perf/util/bpf_ftrace.c
Also perf_env__get_cpu() was removed back in "perf cpumap: Switch
cpu_map__build_map to cpu function".
Additionally these needed to be fixed for the ARM builds to complete:
tools/perf/arch/arm/util/cs-etm.c
tools/perf/arch/arm64/util/pmu.c
Suggested-by: John Garry <john.garry@huawei.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Vineet Singh <vineet.singh@intel.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: zhengjun.xing@intel.com
Link: https://lore.kernel.org/r/20220105061351.120843-49-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf_stat__update_shadow_stats() and perf_stat__print_shadow_stats() use
a cpu map index rather than a CPU, but first_shadow_cpu is returning the
wrong value for this. Change first_shadow_cpu to
first_shadow_cpu_map_idx to make things agree.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Vineet Singh <vineet.singh@intel.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: zhengjun.xing@intel.com
Link: https://lore.kernel.org/r/20220105061351.120843-48-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Synchronize the caller in evsel with the called function.
Shorten 3 lines of code in bperf_read by using
perf_cpu_map__for_each_cpu().
This code is frequently using variables named cpu as cpu map indices,
which doesn't matter as all CPUs are in the CPU map. It is strange in
some cases the cpumap is used at all.
Committer notes:
Found when building with BUILD_BPF_SKEL=1:
Remove unused 'num_cpu' variable in bperf__read().
Make 'j' an 'int' as it is used in perf_cpu_map__for_each_cpu() to compare against an 'int'
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Vineet Singh <vineet.singh@intel.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: zhengjun.xing@intel.com
Link: https://lore.kernel.org/r/20220105061351.120843-45-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The use of CPU is error prone, switch to cpu_map_idx.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Vineet Singh <vineet.singh@intel.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: zhengjun.xing@intel.com
Link: https://lore.kernel.org/r/20220105061351.120843-43-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Code was incorrectly using the cpu map index as the CPU.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Vineet Singh <vineet.singh@intel.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: zhengjun.xing@intel.com
Link: https://lore.kernel.org/r/20220105061351.120843-42-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Clean up variable naming to make cpu and index clearer.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Vineet Singh <vineet.singh@intel.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: zhengjun.xing@intel.com
Link: https://lore.kernel.org/r/20220105061351.120843-41-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
CPU is really a cpu map index, change names to make code more intention
revealing.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Vineet Singh <vineet.singh@intel.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: zhengjun.xing@intel.com
Link: https://lore.kernel.org/r/20220105061351.120843-38-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
evsel__write_stat_event() was incorrectly passing a cpu map index rather
than a CPU to perf_event__synthesize_stat().
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Vineet Singh <vineet.singh@intel.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: zhengjun.xing@intel.com
Link: https://lore.kernel.org/r/20220105061351.120843-36-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Previously evlist__for_each_cpu() needed to iterate over the evlist in
an inner loop and call "skip" routines. Refactor this so that the
iteratr is smarter and the next function can update both the current CPU
and evsel.
By using a cpu map index, fix apparent off-by-1 in __run_perf_stat's
call to perf_evsel__close_cpu().
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Vineet Singh <vineet.singh@intel.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: zhengjun.xing@intel.com
Link: https://lore.kernel.org/r/20220105061351.120843-35-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Correct in print_counter() where an index was being used as a cpu.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Vineet Singh <vineet.singh@intel.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: zhengjun.xing@intel.com
Link: https://lore.kernel.org/r/20220105061351.120843-32-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Try to reduce confusion in particular when the cpu map doesn't contain
an entry for every CPU.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Vineet Singh <vineet.singh@intel.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: zhengjun.xing@intel.com
Link: https://lore.kernel.org/r/20220105061351.120843-30-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix issue where evsel's CPU map index was being used as the mmap cpu.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Vineet Singh <vineet.singh@intel.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: zhengjun.xing@intel.com
Link: https://lore.kernel.org/r/20220105061351.120843-29-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Passing the number of CPUs and threads allows for an evsel's counts to
be mismatched to its cpu map. To avoid this always derive the counts
size from the cpu map. Change openat-syscall-all-cpus to set the cpus
to allow for this to work.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Vineet Singh <vineet.singh@intel.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: zhengjun.xing@intel.com
Link: https://lore.kernel.org/r/20220105061351.120843-27-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With no aggregration, such as 'perf stat -A', the aggr_cpu_id lacks a
way to describe per CPU aggregation and the core is set to the CPU in
places like print_counter_aggrdata in stat-display.c.
Setting the core to the CPU is undesirable as the CPU will exceed valid
core values and lead to confusion. Add a CPU variable to address this.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Vineet Singh <vineet.singh@intel.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: zhengjun.xing@intel.com
Link: https://lore.kernel.org/r/20220105061351.120843-25-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If the key is already present then free the key used for lookup.
Found with:
$ perf stat -M IO_Read_BW /bin/true
==1749112==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 32 byte(s) in 4 object(s) allocated from:
#0 0x7f6f6fa7d7cf in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145
#1 0x55acecd9d7a6 in check_per_pkg util/stat.c:343
#2 0x55acecd9d9c5 in process_counter_values util/stat.c:365
#3 0x55acecd9e0ab in process_counter_maps util/stat.c:421
#4 0x55acecd9e292 in perf_stat_process_counter util/stat.c:443
#5 0x55aceca8553e in read_counters ./tools/perf/builtin-stat.c:470
#6 0x55aceca88fe3 in __run_perf_stat ./tools/perf/builtin-stat.c:1023
#7 0x55aceca89146 in run_perf_stat ./tools/perf/builtin-stat.c:1048
#8 0x55aceca90858 in cmd_stat ./tools/perf/builtin-stat.c:2555
#9 0x55acecc05fa5 in run_builtin ./tools/perf/perf.c:313
#10 0x55acecc064fe in handle_internal_command ./tools/perf/perf.c:365
#11 0x55acecc068bb in run_argv ./tools/perf/perf.c:409
#12 0x55acecc070aa in main ./tools/perf/perf.c:539
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Vineet Singh <vineet.singh@intel.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: zhengjun.xing@intel.com
Link: https://lore.kernel.org/r/20220105061351.120843-24-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Make the cpu map argument const for consistency with the rest of the
API. Modify cpu_map__idx accordingly.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Vineet Singh <vineet.singh@intel.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: zhengjun.xing@intel.com
Link: https://lore.kernel.org/r/20220105061351.120843-21-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The functions don't use a cpu_map so reduce them to being like
constructors of aggr_cpu_id.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Vineet Singh <vineet.singh@intel.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: zhengjun.xing@intel.com
Link: https://lore.kernel.org/r/20220105061351.120843-20-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Switch the remaining few users of cpu_map__cpu() to perf_cpu_map__cpu()
and remove the function.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Vineet Singh <vineet.singh@intel.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: zhengjun.xing@intel.com
Link: https://lore.kernel.org/r/20220105061351.120843-18-irogers@google.com
[ Did the conversion to perf_ftrace__latency_prepare_bpf() as well, used when building with BUILD_BPF_SKEL=1 ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move to the cpu name and document for consistency.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Vineet Singh <vineet.singh@intel.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: zhengjun.xing@intel.com
Link: https://lore.kernel.org/r/20220105061351.120843-17-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Remove cpu_map from name as a cpu_map isn't used. Pass a const pointer
rather than by value to avoid unnecessary copying.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Vineet Singh <vineet.singh@intel.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: zhengjun.xing@intel.com
Link: https://lore.kernel.org/r/20220105061351.120843-15-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename cpu_map__compare_aggr_cpu_id() to aggr_cpu_id__equal(), the
cpu_map part of the name is misleading. Equal better describes the
function than compare.
Switch to const pointer rather than value as struct given the number of
variables in aggr_cpu_id().
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Vineet Singh <vineet.singh@intel.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: zhengjun.xing@intel.com
Link: https://lore.kernel.org/r/20220105061351.120843-14-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Avoid possible bugs where the wrong index is passed with the cpu_map.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Vineet Singh <vineet.singh@intel.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: zhengjun.xing@intel.com
Link: https://lore.kernel.org/r/20220105061351.120843-6-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tidy up the use of cpu and index to hopefully make the code less error
prone. Avoid unused warnings with (void) which will be removed in a
later patch.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Vineet Singh <vineet.singh@intel.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: zhengjun.xing@intel.com
Link: https://lore.kernel.org/r/20220105061351.120843-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The cpu_map and index can get confused. Add variants of the cpu_map__get
routines that are passed a cpu. Make the existing cpu_map__get routines
use the new functions with a view to remove them when no longer used.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Vineet Singh <vineet.singh@intel.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: zhengjun.xing@intel.com
Link: https://lore.kernel.org/r/20220105061351.120843-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A particular observed problem is confusing the index with the CPU value,
documentation should hopefully reduce this type of problem.
Reviewed-by: James Clark <james.clark@arm.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Vineet Singh <vineet.singh@intel.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: zhengjun.xing@intel.com
Link: https://lore.kernel.org/r/20220105061351.120843-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When a group has multiple events and the leader fails it can yield
errors like:
$ perf stat -e '{uncore_imc/cas_count_read/},instructions' /bin/true
Error:
The sys_perf_event_open() syscall returned with 22 (Invalid argument) for event (uncore_imc/cas_count_read/).
/bin/dmesg | grep -i perf may provide additional information.
However, when not the group leader <not supported> is given:
$ perf stat -e '{instructions,uncore_imc/cas_count_read/}' /bin/true
...
1,619,057 instructions
<not supported> MiB uncore_imc/cas_count_read/
This is necessary because get_group_fd will fail if the leader fails and
is the direct result of the check on line 750 of builtin-stat.c in
stat_handle_error that returns COUNTER_SKIP for the latter case.
This patch improves the error message to:
$ perf stat -e '{uncore_imc/cas_count_read/},instructions' /bin/true
Error:
Invalid event (uncore_imc/cas_count_read/) in per-thread mode, enable system wide with '-a'.
v2. Changed the test to use !target__has_cpu as suggested by Namhyung Kim.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20211223183948.3423989-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Uncore events as group leaders fail in per-thread mode causing exit
errors. Enable system-wide for metricgroup testing. This fixes the HPC
metric group when tested on skylakex.
Fixes: 4a87dea9e6 ("perf test: Workload test of metric and metricgroups")
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20211223183948.3423989-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQQdXVVFGN5XqKr1Hj7LwZzRsCrn5QUCYdxh3xQcem9oYXJAbGlu
dXguaWJtLmNvbQAKCRDLwZzRsCrn5bXsAP9xioC+sDpA+KgicrTxLQp2HBHVdkdj
hnsSw7KE6d1YFwD/Zu1BPi/iX1HHcEvTm34x9jKWeU54VCyqsXJG+zArDA0=
=/eFf
-----END PGP SIGNATURE-----
Merge tag 'integrity-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity subsystem updates from Mimi Zohar:
"The few changes are all kexec related:
- The MOK keys are loaded onto the .platform keyring in order to
verify the kexec kernel image signature.
However, the MOK keys should only be trusted when secure boot is
enabled. Before loading the MOK keys onto the .platform keyring,
make sure the system is booted in secure boot mode.
- When carrying the IMA measurement list across kexec, limit dumping
the measurement list to when dynamic debug or CONFIG_DEBUG is
enabled.
- kselftest: add kexec_file_load selftest support for PowerNV and
other cleanup"
* tag 'integrity-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
selftests/kexec: Enable secureboot tests for PowerPC
ima: silence measurement list hexdump during kexec
selftests/kexec: update searching for the Kconfig
selftest/kexec: fix "ignored null byte in input" warning
integrity: Do not load MOK and MOKx when secure boot be disabled
ima: Fix undefined arch_ima_get_secureboot() and co
- new testing module: gpio-sim that is scheduled to replace gpio-mockup
- initial changes aiming at converting all GPIO drivers to using the fwnode
interface and limiting any references to OF symbols to gpiolib-of.c
- add support for Tegra234 and Tegra241 to gpio-tegra186
- add support for new models (SSD201 and SSD202D) to gpio-msc313
- add basic support for interrupts to gpio-aggregator
- add support for AMDIF031 HID device to gpio-amdpt
- drop support for unused platforms in gpio-xlp
- cleanup leftovers from the removal of the legacy Samsung Exynos GPIO driver
- use raw spinlocks in gpio-aspeed and gpio-aspeed-sgpio to make PREEMPT_RT
happy
- generalize the common 'ngpios' device property by reading it in the core
gpiolib code so that we can remove duplicate reads from drivers
- allow line names from device properties to override names set by drivers
- code shrink in gpiod_add_lookup_table()
- add new model to the DT bindings for gpio-vf610
- convert DT bindings for tegra devices to YAML
- improvements to interrupt handling in gpio-rcar and gpio-rockchip
- updates to intel drivers from Andy (details in the merge commit)
- some minor tweaks, improvements and coding-style fixes all around the
subsystem
-----BEGIN PGP SIGNATURE-----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=OUhL
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"The gpio-sim module is back, this time without any changes to
configfs. This results in a less elegant user-space interface but I
never got any follow-up on the committable items and didn't want to
delay this module for several more months.
Other than that we have support for several new models and some
support going away. We started working on converting GPIO drivers to
using fwnode exclusively in order to limit references to OF symbols to
gpiolib-of.c exclusively. We also have regular tweaks and improvements
all over the place.
Summary:
- new testing module: gpio-sim that is scheduled to replace
gpio-mockup
- initial changes aiming at converting all GPIO drivers to using the
fwnode interface and limiting any references to OF symbols to
gpiolib-of.c
- add support for Tegra234 and Tegra241 to gpio-tegra186
- add support for new models (SSD201 and SSD202D) to gpio-msc313
- add basic support for interrupts to gpio-aggregator
- add support for AMDIF031 HID device to gpio-amdpt
- drop support for unused platforms in gpio-xlp
- cleanup leftovers from the removal of the legacy Samsung Exynos
GPIO driver
- use raw spinlocks in gpio-aspeed and gpio-aspeed-sgpio to make
PREEMPT_RT happy
- generalize the common 'ngpios' device property by reading it in the
core gpiolib code so that we can remove duplicate reads from
drivers
- allow line names from device properties to override names set by
drivers
- code shrink in gpiod_add_lookup_table()
- add new model to the DT bindings for gpio-vf610
- convert DT bindings for tegra devices to YAML
- improvements to interrupt handling in gpio-rcar and gpio-rockchip
- updates to intel drivers from Andy (details in the merge commit)
- some minor tweaks, improvements and coding-style fixes all around
the subsystem"
* tag 'gpio-updates-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (59 commits)
gpio: rcar: Propagate errors from devm_request_irq()
gpio: rcar: Use platform_get_irq() to get the interrupt
gpio: ts5500: Use platform_get_irq() to get the interrupt
gpio: dwapb: Switch to use fwnode instead of of_node
gpiolib: acpi: make fwnode take precedence in struct gpio_chip
dt-bindings: gpio: samsung: drop unused bindings
gpio: max3191x: Use bitmap_free() to free bitmap
gpio: regmap: Switch to use fwnode instead of of_node
gpio: tegra186: Add support for Tegra241
dt-bindings: gpio: Add Tegra241 support
gpio: brcmstb: Use local variable to access OF node
gpio: Remove unused local OF node pointers
gpio: sim: add missing fwnode_handle_put() in gpio_sim_probe()
gpio: msc313: Add support for SSD201 and SSD202D
gpio: msc313: Code clean ups
dt-bindings: gpio: msc313: Add offsets for ssd20xd
dt-bindings: gpio: msc313: Add compatible for ssd20xd
gpio: sim: fix uninitialized ret variable
gpio: Propagate firmware node from a parent device
gpio: Setup parent device and get rid of unnecessary of_node assignment
...
Highlights:
- new drivers:
- asus-tf103c-dock
- intel_crystal_cove_charger
- lenovo-yogabook-wmi
- simatic-ipc platform-code + led driver + watchdog driver
- x86-android-tablets (kernel module to workaround DSDT bugs on these)
- amd-pmc:
- bug-fixes
- smar trace buffer support
- asus-wmi: support for custom fan curves
- int3472 (camera info ACPI object for Intel IPU3/SkyCam cameras):
- ACPI core + int3472 changes to delay enumeration of camera sensor I2C
clients until the PMIC for the sensor has been fully probed
- Add support for board data (DSDT info is incomplete) for setting up
the tps68470 PMIC used on some boards with these cameras
- Add board data for the Microsoft Surface Go (original, v2 and v3)
- thinkpad_acpi:
- various cleanups
- support for forced battery discharging (for battery calibration)
- support to inhibit battery charging
- this includes power_supply core changes to add new APIs for this
- think_lmi: enhanced BIOS password support
- various other small fixes and hardware-id additions
The following is an automated git shortlog grouped by driver:
ACPI:
- delay enumeration of devices with a _DEP pointing to an INT3472 device
Add Asus TF103C dock driver:
- Add Asus TF103C dock driver
Add intel_crystal_cove_charger driver:
- Add intel_crystal_cove_charger driver
Documentation:
- syfs-class-firmware-attributes: Lenovo Opcode support
Merge tag 'platform-drivers-x86-int3472-1' into review-hans:
- Merge tag 'platform-drivers-x86-int3472-1' into review-hans
amd-pmc:
- only use callbacks for suspend
- Add support for AMD Smart Trace Buffer
- Simplify error handling and store the pci_dev in amd_pmc_dev structure
- Fix s2idle failures on certain AMD laptops
- Make CONFIG_AMD_PMC depend on RTC_CLASS
apple-gmux:
- use resource_size() with res
asus-wmi:
- Reshuffle headers for better maintenance
- Split MODULE_AUTHOR() on per author basis
- Join string literals back
- remove unneeded semicolon
- Add support for custom fan curves
dell-wmi-descriptor:
- disable by default
hp_accel:
- Use SIMPLE_DEV_PM_OPS() for PM ops
- Fix an error handling path in 'lis3lv02d_probe()'
i2c:
- acpi: Add i2c_acpi_new_device_by_fwnode() function
- acpi: Use acpi_dev_ready_for_enumeration() helper
int3472:
- Add board data for Surface Go 3
- Deal with probe ordering issues
- Pass tps68470_regulator_platform_data to the tps68470-regulator MFD-cell
- Pass tps68470_clk_platform_data to the tps68470-regulator MFD-cell
- Add get_sensor_adev_and_name() helper
- Split into 2 drivers
intel-uncore-frequency:
- use default_groups in kobj_type
intel_pmc_core:
- fix memleak on registration failure
leds:
- simatic-ipc-leds: add new driver for Siemens Industial PCs
lenovo-yogabook-wmi:
- Add support for hall sensor on the back
- Add driver for Lenovo Yoga Book
lg-laptop:
- Recognize more models
platform:
- surface: Propagate ACPI Dependency
platform/mellanox:
- mlxbf-pmc: Fix an IS_ERR() vs NULL bug in mlxbf_pmc_map_counters
- mlxreg-lc: fix error code in mlxreg_lc_create_static_devices()
platform/surface:
- aggregator_registry: Rename device registration function
- aggregator_registry: Use generic client removal function
- aggregator: Make client device removal more generic
platform/x86/intel:
- Remove X86_PLATFORM_DRIVERS_INTEL
- hid: add quirk to support Surface Go 3
platform_data:
- Add linux/platform_data/tps68470.h file
pmc_atom:
- improve critclk_systems matching for Siemens PCs
power:
- supply: Provide stubs for charge_behaviour helpers
- supply: fix charge_behaviour attribute initialization
- supply: add helpers for charge_behaviour sysfs
- supply: add charge_behaviour attributes
samsung-laptop:
- Fix typo in a comment
simatic-ipc:
- add main driver for Siemens devices
system76_acpi:
- Guard System76 EC specific functionality
think-lmi:
- Prevent underflow in index_store()
- Simplify tlmi_analyze() error handling a bit
- Move kobject_init() call into tlmi_create_auth()
- Opcode support
- Abort probe on analyze failure
thinkpad_acpi:
- support inhibit-charge
- support force-discharge
- Add lid_logo_dot to the list of safe LEDs
- Add LED_RETAIN_AT_SHUTDOWN to led_class_devs
- Remove unused sensors_pdev_attrs_registered flag
- Fix the hwmon sysfs-attr showing up in the wrong place
- tpacpi_attr_group contains driver attributes not device attrs
- Register tpacpi_pdriver after subdriver init
- Restore missing hotkey_tablet_mode and hotkey_radio_sw sysfs-attr
- Fix thermal_temp_input_attr sorting
- Remove "goto err_exit" from hotkey_init()
- Properly indent code in tpacpi_dytc_profile_init()
- Cleanup dytc_profile_available
- Simplify dytc_version handling
- Make *_init() functions return -ENODEV instead of 1
- Accept ibm_init_struct.init() returning -ENODEV
- Convert platform driver to use dev_groups
- fix documentation for adaptive keyboard
- Fix WWAN device disabled issue after S3 deep
- Add support for dual fan control
tools/power/x86/intel-speed-select:
- v1.11 release
- Update max frequency
touchscreen_dmi:
- Remove the Glavey TM800A550L entry
- Enable pen support on the Chuwi Hi10 Plus and Pro
- Correct min/max values for Chuwi Hi10 Pro (CWI529) tablet
- Add TrekStor SurfTab duo W1 touchscreen info
watchdog:
- simatic-ipc-wdt: add new driver for Siemens Industrial PCs
wmi:
- Add no_notify_data flag to struct wmi_driver
- Fix driver->notify() vs ->probe() race
- Replace read_takes_no_args with a flags field
x86-android-tablets:
- Fix GPIO lookup leak on error-exit
- Add TM800A550L data
- Add Asus MeMO Pad 7 ME176C data
- Add Asus TF103C data
- Add support for preloading modules
- Add support for registering GPIO lookup tables
- Add support for instantiating serdevs
- Add support for instantiating platform-devs
- Add support for PMIC interrupts
- Don't return -EPROBE_DEFER from a non probe() function
- New driver for x86 Android tablets
x86/platform/uv:
- use default_groups in kobj_type
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmHcCbkUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9y3yAf/Xo8TWsnF7XoS3pNCqRcObIulHy6u
9AOD4gTb0p9LiAd8WN75UsQDew0Rib+UDTS3s6g9l71fMzpTFOD4IaBPrVAmIxpu
Qs9raFTH67CFid/V3DCwAjPQYxxp5LBGvYJ4oy3OmaYHieV9jdsvNLISlpi/V8wR
PmbmYtiK5TPZwRT+mknq89D+LynP2NYkvoqRitmB7MrAvxY3c0ssrex6dXMrdgqK
ehRtfz/ER8xQ03APIzHG+ec73LZsHCMDDG7teas4tiMlMaWGgRO2I8GAudjuPEoy
mBTSb3ABuEud8LTMgjB+trM2w9IAoFE0L6/OrKE5dK1tPdaLxvCuuSVheQ==
=tmPR
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
"Highlights:
New drivers:
- asus-tf103c-dock
- intel_crystal_cove_charger
- lenovo-yogabook-wmi
- simatic-ipc platform-code + led driver + watchdog driver
- x86-android-tablets (kernel module to workaround DSDT bugs on
these)
amd-pmc:
- bug-fixes
- smar trace buffer support
asus-wmi:
- support for custom fan curves
int3472 (camera info ACPI object for Intel IPU3/SkyCam cameras):
- ACPI core + int3472 changes to delay enumeration of camera sensor
I2C clients until the PMIC for the sensor has been fully probed
- Add support for board data (DSDT info is incomplete) for setting up
the tps68470 PMIC used on some boards with these cameras
- Add board data for the Microsoft Surface Go (original, v2 and v3)
thinkpad_acpi:
- various cleanups
- support for forced battery discharging (for battery calibration)
- support to inhibit battery charging
- this includes power_supply core changes to add new APIs for this
think_lmi:
- enhanced BIOS password support
various other small fixes and hardware-id additions"
* tag 'platform-drivers-x86-v5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (78 commits)
power: supply: Provide stubs for charge_behaviour helpers
platform/x86: x86-android-tablets: Fix GPIO lookup leak on error-exit
platform/x86: int3472: Add board data for Surface Go 3
platform/x86: Add Asus TF103C dock driver
platform/x86: x86-android-tablets: Add TM800A550L data
platform/x86: x86-android-tablets: Add Asus MeMO Pad 7 ME176C data
platform/x86: x86-android-tablets: Add Asus TF103C data
platform/x86: x86-android-tablets: Add support for preloading modules
platform/x86: x86-android-tablets: Add support for registering GPIO lookup tables
platform/x86: x86-android-tablets: Add support for instantiating serdevs
platform/x86: x86-android-tablets: Add support for instantiating platform-devs
platform/x86: x86-android-tablets: Add support for PMIC interrupts
platform/x86: x86-android-tablets: Don't return -EPROBE_DEFER from a non probe() function
platform/x86: touchscreen_dmi: Remove the Glavey TM800A550L entry
platform/x86: touchscreen_dmi: Enable pen support on the Chuwi Hi10 Plus and Pro
platform/x86: touchscreen_dmi: Correct min/max values for Chuwi Hi10 Pro (CWI529) tablet
platform/x86: Add intel_crystal_cove_charger driver
power: supply: fix charge_behaviour attribute initialization
platform/x86: intel-uncore-frequency: use default_groups in kobj_type
x86/platform/uv: use default_groups in kobj_type
...
This series provides KCSAN fixes and also the ability to take memory
barriers into account for weakly-ordered systems. This last can increase
the probability of detecting certain types of data races.
-----BEGIN PGP SIGNATURE-----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=Q5fg
-----END PGP SIGNATURE-----
Merge tag 'kcsan.2022.01.09a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull KCSAN updates from Paul McKenney:
"This provides KCSAN fixes and also the ability to take memory barriers
into account for weakly-ordered systems. This last can increase the
probability of detecting certain types of data races"
* tag 'kcsan.2022.01.09a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (29 commits)
kcsan: Only test clear_bit_unlock_is_negative_byte if arch defines it
kcsan: Avoid nested contexts reading inconsistent reorder_access
kcsan: Turn barrier instrumentation into macros
kcsan: Make barrier tests compatible with lockdep
kcsan: Support WEAK_MEMORY with Clang where no objtool support exists
compiler_attributes.h: Add __disable_sanitizer_instrumentation
objtool, kcsan: Remove memory barrier instrumentation from noinstr
objtool, kcsan: Add memory barrier instrumentation to whitelist
sched, kcsan: Enable memory barrier instrumentation
mm, kcsan: Enable barrier instrumentation
x86/qspinlock, kcsan: Instrument barrier of pv_queued_spin_unlock()
x86/barriers, kcsan: Use generic instrumentation for non-smp barriers
asm-generic/bitops, kcsan: Add instrumentation for barriers
locking/atomics, kcsan: Add instrumentation for barriers
locking/barriers, kcsan: Support generic instrumentation
locking/barriers, kcsan: Add instrumentation for barriers
kcsan: selftest: Add test case to check memory barrier instrumentation
kcsan: Ignore GCC 11+ warnings about TSan runtime support
kcsan: test: Add test cases for memory barrier instrumentation
kcsan: test: Match reordered or normal accesses
...
Add a check to the xdp_link selftest that the kernel rejects replacing an
XDP program with a different program type on link update.
v2:
- Split this out into its own patch.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20220107221115.326171-3-toke@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Convert the selftest to use the preferred ASSERT_* macros instead of the
deprecated CHECK().
v2:
- Don't add if statements around checks if they weren't there before.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20220107221115.326171-2-toke@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This series contains documentation and litmus tests for locking, courtesy
of Boqun Feng.
-----BEGIN PGP SIGNATURE-----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=3YsU
-----END PGP SIGNATURE-----
Merge tag 'lkmm.2022.01.09a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull memory model documentation updates from Paul McKenney:
"This series contains documentation and litmus tests for locking,
courtesy of Boqun Feng"
* tag 'lkmm.2022.01.09a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
tools/memory-model: litmus: Add two tests for unlock(A)+lock(B) ordering
tools/memory-model: doc: Describe the requirement of the litmus-tests directory
tools/memory-model: Provide extra ordering for unlock+lock pair on the same CPU
This pull request contains the following branches:
doc.2021.11.30c: Documentation updates, perhaps most notably Neil Brown's
writeup of the reference-counting analogy to RCU.
exp.2021.12.07a: Expedited grace-period cleanups.
fastnohz.2021.11.30c: Remove CONFIG_RCU_FAST_NO_HZ due to lack of valid
users. I have asked around, posted a blog entry, and sent this
series to LKML without result.
fixes.2021.11.30c: Miscellaneous fixes.
nocb.2021.12.09a: RCU callback offloading updates, perhaps most notably
Frederic Weisbecker's updates allowing CPUs booted in the
de-offloaded state to be offloaded at runtime.
nolibc.2021.11.30c: nolibc fixes from Willy Tarreau and Anmar Faizi, but
also including Mark Brown's addition of gettid().
tasks.2021.12.09a: RCU Tasks Trace fixes, including changes that increase
the scalability of call_rcu_tasks_trace() for the BPF folks
(Martin Lau and KP Singh).
torture.2021.12.07a: Various fixes including those from Wander Lairson
Costa and Li Zhijian.
torturescript.2021.11.30c: Fixes plus addition of tests for the increased
call_rcu_tasks_trace() scalability.
-----BEGIN PGP SIGNATURE-----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=K6AN
-----END PGP SIGNATURE-----
Merge tag 'rcu.2022.01.09a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull RCU updates from Paul McKenney:
- Documentation updates, perhaps most notably Neil Brown's writeup of
the reference-counting analogy to RCU.
- Expedited grace-period cleanups.
- Remove CONFIG_RCU_FAST_NO_HZ due to lack of valid users. I have asked
around, posted a blog entry, and sent this series to LKML without
result.
- Miscellaneous fixes.
- RCU callback offloading updates, perhaps most notably Frederic
Weisbecker's updates allowing CPUs booted in the de-offloaded state
to be offloaded at runtime.
- nolibc fixes from Willy Tarreau and Anmar Faizi, but also including
Mark Brown's addition of gettid().
- RCU Tasks Trace fixes, including changes that increase the
scalability of call_rcu_tasks_trace() for the BPF folks (Martin Lau
and KP Singh).
- Various fixes including those from Wander Lairson Costa and Li
Zhijian.
- Fixes plus addition of tests for the increased call_rcu_tasks_trace()
scalability.
* tag 'rcu.2022.01.09a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (87 commits)
rcu/nocb: Merge rcu_spawn_cpu_nocb_kthread() and rcu_spawn_one_nocb_kthread()
rcu/nocb: Allow empty "rcu_nocbs" kernel parameter
rcu/nocb: Create kthreads on all CPUs if "rcu_nocbs=" or "nohz_full=" are passed
rcu/nocb: Optimize kthreads and rdp initialization
rcu/nocb: Prepare nocb_cb_wait() to start with a non-offloaded rdp
rcu/nocb: Remove rcu_node structure from nocb list when de-offloaded
rcu-tasks: Use fewer callbacks queues if callback flood ends
rcu-tasks: Use separate ->percpu_dequeue_lim for callback dequeueing
rcu-tasks: Use more callback queues if contention encountered
rcu-tasks: Avoid raw-spinlocked wakeups from call_rcu_tasks_generic()
rcu-tasks: Count trylocks to estimate call_rcu_tasks() contention
rcu-tasks: Add rcupdate.rcu_task_enqueue_lim to set initial queueing
rcu-tasks: Make rcu_barrier_tasks*() handle multiple callback queues
rcu-tasks: Use workqueues for multiple rcu_tasks_invoke_cbs() invocations
rcu-tasks: Abstract invocations of callbacks
rcu-tasks: Abstract checking of callback lists
rcu-tasks: Add a ->percpu_enqueue_lim to the rcu_tasks structure
rcu-tasks: Inspect stalled task's trc state in locked state
rcu-tasks: Use spin_lock_rcu_node() and friends
rcutorture: Combine n_max_cbs from all kthreads in a callback flood
...
- Add new TSU driver and DT bindings for the Renesas RZ/G2L platform
(Biju Das).
- Fix missing check when calling reset_control_deassert() in the
rz2gl thermal driver (Biju Das).
- In preparation for FORTIFY_SOURCE performing compile-time and
run-time field bounds checking for memcpy(), avoid intentionally
writing across neighboring fields in the int340x thermal control
driver (Kees Cook).
- Fix RFIM mailbox write commands handling in the int340x thermal
control driver (Sumeet Pawnikar).
- Fix PM issue occurring in the iMX thermal control driver during
suspend/resume by implementing PM runtime support in it (Oleksij
Rempel).
- Add 'const' annotation to thermal_cooling_ops in the Intel
powerclamp driver (Rikard Falkeborn).
- Fix missing ADC bit set in the iMX8MP thermal driver to enable the
sensor (Paul Gerber).
- Drop unused local variable definition from tmon (ran jianping).
-----BEGIN PGP SIGNATURE-----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=Crok
-----END PGP SIGNATURE-----
Merge tag 'thermal-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These add a new driver for Renesas RZ/G2L TSU, update a few existing
thermal control drivers and clean up the tmon utility.
Specifics:
- Add new TSU driver and DT bindings for the Renesas RZ/G2L platform
(Biju Das).
- Fix missing check when calling reset_control_deassert() in the
rz2gl thermal driver (Biju Das).
- In preparation for FORTIFY_SOURCE performing compile-time and
run-time field bounds checking for memcpy(), avoid intentionally
writing across neighboring fields in the int340x thermal control
driver (Kees Cook).
- Fix RFIM mailbox write commands handling in the int340x thermal
control driver (Sumeet Pawnikar).
- Fix PM issue occurring in the iMX thermal control driver during
suspend/resume by implementing PM runtime support in it (Oleksij
Rempel).
- Add 'const' annotation to thermal_cooling_ops in the Intel
powerclamp driver (Rikard Falkeborn).
- Fix missing ADC bit set in the iMX8MP thermal driver to enable the
sensor (Paul Gerber).
- Drop unused local variable definition from tmon (ran jianping)"
* tag 'thermal-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal/drivers/int340x: Fix RFIM mailbox write commands
thermal/drivers/rz2gl: Add error check for reset_control_deassert()
thermal/drivers/imx8mm: Enable ADC when enabling monitor
thermal/drivers: Add TSU driver for RZ/G2L
dt-bindings: thermal: Document Renesas RZ/G2L TSU
thermal/drivers/intel_powerclamp: Constify static thermal_cooling_device_ops
thermal/drivers/imx: Implement runtime PM support
thermal: tools: tmon: remove unneeded local variable
thermal: int340x: Use struct_group() for memcpy() region
Core
----
- Defer freeing TCP skbs to the BH handler, whenever possible,
or at least perform the freeing outside of the socket lock section
to decrease cross-CPU allocator work and improve latency.
- Add netdevice refcount tracking to locate sources of netdevice
and net namespace refcount leaks.
- Make Tx watchdog less intrusive - avoid pausing Tx and restarting
all queues from a single CPU removing latency spikes.
- Various small optimizations throughout the stack from Eric Dumazet.
- Make netdev->dev_addr[] constant, force modifications to go via
appropriate helpers to allow us to keep addresses in ordered data
structures.
- Replace unix_table_lock with per-hash locks, improving performance
of bind() calls.
- Extend skb drop tracepoint with a drop reason.
- Allow SO_MARK and SO_PRIORITY setsockopt under CAP_NET_RAW.
BPF
---
- New helpers:
- bpf_find_vma(), find and inspect VMAs for profiling use cases
- bpf_loop(), runtime-bounded loop helper trading some execution
time for much faster (if at all converging) verification
- bpf_strncmp(), improve performance, avoid compiler flakiness
- bpf_get_func_arg(), bpf_get_func_ret(), bpf_get_func_arg_cnt()
for tracing programs, all inlined by the verifier
- Support BPF relocations (CO-RE) in the kernel loader.
- Further the support for BTF_TYPE_TAG annotations.
- Allow access to local storage in sleepable helpers.
- Convert verifier argument types to a composable form with different
attributes which can be shared across types (ro, maybe-null).
- Prepare libbpf for upcoming v1.0 release by cleaning up APIs,
creating new, extensible ones where missing and deprecating those
to be removed.
Protocols
---------
- WiFi (mac80211/cfg80211):
- notify user space about long "come back in N" AP responses,
allow it to react to such temporary rejections
- allow non-standard VHT MCS 10/11 rates
- use coarse time in airtime fairness code to save CPU cycles
- Bluetooth:
- rework of HCI command execution serialization to use a common
queue and work struct, and improve handling errors reported
in the middle of a batch of commands
- rework HCI event handling to use skb_pull_data, avoiding packet
parsing pitfalls
- support AOSP Bluetooth Quality Report
- SMC:
- support net namespaces, following the RDMA model
- improve connection establishment latency by pre-clearing buffers
- introduce TCP ULP for automatic redirection to SMC
- Multi-Path TCP:
- support ioctls: SIOCINQ, OUTQ, and OUTQNSD
- support socket options: IP_TOS, IP_FREEBIND, IP_TRANSPARENT,
IPV6_FREEBIND, and IPV6_TRANSPARENT, TCP_CORK and TCP_NODELAY
- support cmsgs: TCP_INQ
- improvements in the data scheduler (assigning data to subflows)
- support fastclose option (quick shutdown of the full MPTCP
connection, similar to TCP RST in regular TCP)
- MCTP (Management Component Transport) over serial, as defined by
DMTF spec DSP0253 - "MCTP Serial Transport Binding".
Driver API
----------
- Support timestamping on bond interfaces in active/passive mode.
- Introduce generic phylink link mode validation for drivers which
don't have any quirks and where MAC capability bits fully express
what's supported. Allow PCS layer to participate in the validation.
Convert a number of drivers.
- Add support to set/get size of buffers on the Rx rings and size of
the tx copybreak buffer via ethtool.
- Support offloading TC actions as first-class citizens rather than
only as attributes of filters, improve sharing and device resource
utilization.
- WiFi (mac80211/cfg80211):
- support forwarding offload (ndo_fill_forward_path)
- support for background radar detection hardware
- SA Query Procedures offload on the AP side
New hardware / drivers
----------------------
- tsnep - FPGA based TSN endpoint Ethernet MAC used in PLCs with
real-time requirements for isochronous communication with protocols
like OPC UA Pub/Sub.
- Qualcomm BAM-DMUX WWAN - driver for data channels of modems
integrated into many older Qualcomm SoCs, e.g. MSM8916 or
MSM8974 (qcom_bam_dmux).
- Microchip LAN966x multi-port Gigabit AVB/TSN Ethernet Switch
driver with support for bridging, VLANs and multicast forwarding
(lan966x).
- iwlmei driver for co-operating between Intel's WiFi driver and
Intel's Active Management Technology (AMT) devices.
- mse102x - Vertexcom MSE102x Homeplug GreenPHY chips
- Bluetooth:
- MediaTek MT7921 SDIO devices
- Foxconn MT7922A
- Realtek RTL8852AE
Drivers
-------
- Significantly improve performance in the datapaths of:
lan78xx, ax88179_178a, lantiq_xrx200, bnxt.
- Intel Ethernet NICs:
- igb: support PTP/time PEROUT and EXTTS SDP functions on
82580/i354/i350 adapters
- ixgbevf: new PF -> VF mailbox API which avoids the risk of
mailbox corruption with ESXi
- iavf: support configuration of VLAN features of finer granularity,
stacked tags and filtering
- ice: PTP support for new E822 devices with sub-ns precision
- ice: support firmware activation without reboot
- Mellanox Ethernet NICs (mlx5):
- expose control over IRQ coalescing mode (CQE vs EQE) via ethtool
- support TC forwarding when tunnel encap and decap happen between
two ports of the same NIC
- dynamically size and allow disabling various features to save
resources for running in embedded / SmartNIC scenarios
- Broadcom Ethernet NICs (bnxt):
- use page frag allocator to improve Rx performance
- expose control over IRQ coalescing mode (CQE vs EQE) via ethtool
- Other Ethernet NICs:
- amd-xgbe: add Ryzen 6000 (Yellow Carp) Ethernet support
- Microsoft cloud/virtual NIC (mana):
- add XDP support (PASS, DROP, TX)
- Mellanox Ethernet switches (mlxsw):
- initial support for Spectrum-4 ASICs
- VxLAN with IPv6 underlay
- Marvell Ethernet switches (prestera):
- support flower flow templates
- add basic IP forwarding support
- NXP embedded Ethernet switches (ocelot & felix):
- support Per-Stream Filtering and Policing (PSFP)
- enable cut-through forwarding between ports by default
- support FDMA to improve packet Rx/Tx to CPU
- Other embedded switches:
- hellcreek: improve trapping management (STP and PTP) packets
- qca8k: support link aggregation and port mirroring
- Qualcomm 802.11ax WiFi (ath11k):
- qca6390, wcn6855: enable 802.11 power save mode in station mode
- BSS color change support
- WCN6855 hw2.1 support
- 11d scan offload support
- scan MAC address randomization support
- full monitor mode, only supported on QCN9074
- qca6390/wcn6855: report signal and tx bitrate
- qca6390: rfkill support
- qca6390/wcn6855: regdb.bin support
- Intel WiFi (iwlwifi):
- support SAR GEO Offset Mapping (SGOM) and Time-Aware-SAR (TAS)
in cooperation with the BIOS
- support for Optimized Connectivity Experience (OCE) scan
- support firmware API version 68
- lots of preparatory work for the upcoming Bz device family
- MediaTek WiFi (mt76):
- Specific Absorption Rate (SAR) support
- mt7921: 160 MHz channel support
- RealTek WiFi (rtw88):
- Specific Absorption Rate (SAR) support
- scan offload
- Other WiFi NICs
- ath10k: support fetching (pre-)calibration data from nvmem
- brcmfmac: configure keep-alive packet on suspend
- wcn36xx: beacon filter support
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=KLm3
-----END PGP SIGNATURE-----
Merge tag '5.17-net-next' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core
----
- Defer freeing TCP skbs to the BH handler, whenever possible, or at
least perform the freeing outside of the socket lock section to
decrease cross-CPU allocator work and improve latency.
- Add netdevice refcount tracking to locate sources of netdevice and
net namespace refcount leaks.
- Make Tx watchdog less intrusive - avoid pausing Tx and restarting
all queues from a single CPU removing latency spikes.
- Various small optimizations throughout the stack from Eric Dumazet.
- Make netdev->dev_addr[] constant, force modifications to go via
appropriate helpers to allow us to keep addresses in ordered data
structures.
- Replace unix_table_lock with per-hash locks, improving performance
of bind() calls.
- Extend skb drop tracepoint with a drop reason.
- Allow SO_MARK and SO_PRIORITY setsockopt under CAP_NET_RAW.
BPF
---
- New helpers:
- bpf_find_vma(), find and inspect VMAs for profiling use cases
- bpf_loop(), runtime-bounded loop helper trading some execution
time for much faster (if at all converging) verification
- bpf_strncmp(), improve performance, avoid compiler flakiness
- bpf_get_func_arg(), bpf_get_func_ret(), bpf_get_func_arg_cnt()
for tracing programs, all inlined by the verifier
- Support BPF relocations (CO-RE) in the kernel loader.
- Further the support for BTF_TYPE_TAG annotations.
- Allow access to local storage in sleepable helpers.
- Convert verifier argument types to a composable form with different
attributes which can be shared across types (ro, maybe-null).
- Prepare libbpf for upcoming v1.0 release by cleaning up APIs,
creating new, extensible ones where missing and deprecating those
to be removed.
Protocols
---------
- WiFi (mac80211/cfg80211):
- notify user space about long "come back in N" AP responses,
allow it to react to such temporary rejections
- allow non-standard VHT MCS 10/11 rates
- use coarse time in airtime fairness code to save CPU cycles
- Bluetooth:
- rework of HCI command execution serialization to use a common
queue and work struct, and improve handling errors reported in
the middle of a batch of commands
- rework HCI event handling to use skb_pull_data, avoiding packet
parsing pitfalls
- support AOSP Bluetooth Quality Report
- SMC:
- support net namespaces, following the RDMA model
- improve connection establishment latency by pre-clearing buffers
- introduce TCP ULP for automatic redirection to SMC
- Multi-Path TCP:
- support ioctls: SIOCINQ, OUTQ, and OUTQNSD
- support socket options: IP_TOS, IP_FREEBIND, IP_TRANSPARENT,
IPV6_FREEBIND, and IPV6_TRANSPARENT, TCP_CORK and TCP_NODELAY
- support cmsgs: TCP_INQ
- improvements in the data scheduler (assigning data to subflows)
- support fastclose option (quick shutdown of the full MPTCP
connection, similar to TCP RST in regular TCP)
- MCTP (Management Component Transport) over serial, as defined by
DMTF spec DSP0253 - "MCTP Serial Transport Binding".
Driver API
----------
- Support timestamping on bond interfaces in active/passive mode.
- Introduce generic phylink link mode validation for drivers which
don't have any quirks and where MAC capability bits fully express
what's supported. Allow PCS layer to participate in the validation.
Convert a number of drivers.
- Add support to set/get size of buffers on the Rx rings and size of
the tx copybreak buffer via ethtool.
- Support offloading TC actions as first-class citizens rather than
only as attributes of filters, improve sharing and device resource
utilization.
- WiFi (mac80211/cfg80211):
- support forwarding offload (ndo_fill_forward_path)
- support for background radar detection hardware
- SA Query Procedures offload on the AP side
New hardware / drivers
----------------------
- tsnep - FPGA based TSN endpoint Ethernet MAC used in PLCs with
real-time requirements for isochronous communication with protocols
like OPC UA Pub/Sub.
- Qualcomm BAM-DMUX WWAN - driver for data channels of modems
integrated into many older Qualcomm SoCs, e.g. MSM8916 or MSM8974
(qcom_bam_dmux).
- Microchip LAN966x multi-port Gigabit AVB/TSN Ethernet Switch driver
with support for bridging, VLANs and multicast forwarding
(lan966x).
- iwlmei driver for co-operating between Intel's WiFi driver and
Intel's Active Management Technology (AMT) devices.
- mse102x - Vertexcom MSE102x Homeplug GreenPHY chips
- Bluetooth:
- MediaTek MT7921 SDIO devices
- Foxconn MT7922A
- Realtek RTL8852AE
Drivers
-------
- Significantly improve performance in the datapaths of: lan78xx,
ax88179_178a, lantiq_xrx200, bnxt.
- Intel Ethernet NICs:
- igb: support PTP/time PEROUT and EXTTS SDP functions on
82580/i354/i350 adapters
- ixgbevf: new PF -> VF mailbox API which avoids the risk of
mailbox corruption with ESXi
- iavf: support configuration of VLAN features of finer
granularity, stacked tags and filtering
- ice: PTP support for new E822 devices with sub-ns precision
- ice: support firmware activation without reboot
- Mellanox Ethernet NICs (mlx5):
- expose control over IRQ coalescing mode (CQE vs EQE) via ethtool
- support TC forwarding when tunnel encap and decap happen between
two ports of the same NIC
- dynamically size and allow disabling various features to save
resources for running in embedded / SmartNIC scenarios
- Broadcom Ethernet NICs (bnxt):
- use page frag allocator to improve Rx performance
- expose control over IRQ coalescing mode (CQE vs EQE) via ethtool
- Other Ethernet NICs:
- amd-xgbe: add Ryzen 6000 (Yellow Carp) Ethernet support
- Microsoft cloud/virtual NIC (mana):
- add XDP support (PASS, DROP, TX)
- Mellanox Ethernet switches (mlxsw):
- initial support for Spectrum-4 ASICs
- VxLAN with IPv6 underlay
- Marvell Ethernet switches (prestera):
- support flower flow templates
- add basic IP forwarding support
- NXP embedded Ethernet switches (ocelot & felix):
- support Per-Stream Filtering and Policing (PSFP)
- enable cut-through forwarding between ports by default
- support FDMA to improve packet Rx/Tx to CPU
- Other embedded switches:
- hellcreek: improve trapping management (STP and PTP) packets
- qca8k: support link aggregation and port mirroring
- Qualcomm 802.11ax WiFi (ath11k):
- qca6390, wcn6855: enable 802.11 power save mode in station mode
- BSS color change support
- WCN6855 hw2.1 support
- 11d scan offload support
- scan MAC address randomization support
- full monitor mode, only supported on QCN9074
- qca6390/wcn6855: report signal and tx bitrate
- qca6390: rfkill support
- qca6390/wcn6855: regdb.bin support
- Intel WiFi (iwlwifi):
- support SAR GEO Offset Mapping (SGOM) and Time-Aware-SAR (TAS)
in cooperation with the BIOS
- support for Optimized Connectivity Experience (OCE) scan
- support firmware API version 68
- lots of preparatory work for the upcoming Bz device family
- MediaTek WiFi (mt76):
- Specific Absorption Rate (SAR) support
- mt7921: 160 MHz channel support
- RealTek WiFi (rtw88):
- Specific Absorption Rate (SAR) support
- scan offload
- Other WiFi NICs
- ath10k: support fetching (pre-)calibration data from nvmem
- brcmfmac: configure keep-alive packet on suspend
- wcn36xx: beacon filter support"
* tag '5.17-net-next' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2048 commits)
tcp: tcp_send_challenge_ack delete useless param `skb`
net/qla3xxx: Remove useless DMA-32 fallback configuration
rocker: Remove useless DMA-32 fallback configuration
hinic: Remove useless DMA-32 fallback configuration
lan743x: Remove useless DMA-32 fallback configuration
net: enetc: Remove useless DMA-32 fallback configuration
cxgb4vf: Remove useless DMA-32 fallback configuration
cxgb4: Remove useless DMA-32 fallback configuration
cxgb3: Remove useless DMA-32 fallback configuration
bnx2x: Remove useless DMA-32 fallback configuration
et131x: Remove useless DMA-32 fallback configuration
be2net: Remove useless DMA-32 fallback configuration
vmxnet3: Remove useless DMA-32 fallback configuration
bna: Simplify DMA setting
net: alteon: Simplify DMA setting
myri10ge: Simplify DMA setting
qlcnic: Simplify DMA setting
net: allwinner: Fix print format
page_pool: remove spinlock in page_pool_refill_alloc_cache()
amt: fix wrong return type of amt_send_membership_update()
...
This KUnit update for Linux 5.17-rc1 consists of several fixes and
enhancements. A few highlights:
- Option --kconfig_add option allows easily tweaking kunitconfigs
- make build subcommand can reconfigure if needed
- doesn't error on tests without test plans
- doesn't crash if no parameters are generated
- defaults --jobs to # of cups
- reports test parameter results as (K)TAP subtests
-----BEGIN PGP SIGNATURE-----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=vGqB
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-kunit-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit updates from Shuah Khan:
"This consists of several fixes and enhancements. A few highlights:
- Option --kconfig_add option allows easily tweaking kunitconfigs
- make build subcommand can reconfigure if needed
- doesn't error on tests without test plans
- doesn't crash if no parameters are generated
- defaults --jobs to # of cups
- reports test parameter results as (K)TAP subtests"
* tag 'linux-kselftest-kunit-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: tool: Default --jobs to number of CPUs
kunit: tool: fix newly introduced typechecker errors
kunit: tool: make `build` subcommand also reconfigure if needed
kunit: tool: delete kunit_parser.TestResult type
kunit: tool: use dataclass instead of collections.namedtuple
kunit: tool: suggest using decode_stacktrace.sh on kernel crash
kunit: tool: reconfigure when the used kunitconfig changes
kunit: tool: revamp message for invalid kunitconfig
kunit: tool: add --kconfig_add to allow easily tweaking kunitconfigs
kunit: tool: move Kconfig read_from_file/parse_from_string to package-level
kunit: tool: print parsed test results fully incrementally
kunit: Report test parameter results as (K)TAP subtests
kunit: Don't crash if no parameters are generated
kunit: tool: Report an error if any test has no subtests
kunit: tool: Do not error on tests without test plans
kunit: add run_checks.py script to validate kunit changes
Documentation: kunit: remove claims that kunit is a mocking framework
kunit: tool: fix --json output for skipped tests
This Kselftest update for Linux 5.17-rc1 consists of fixes to build
errors, false negatives, and several code cleanups, including the
ARRAY_SIZE cleanup that removes 25+ duplicates ARRAY_SIZE defines
from individual tests.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAmHYu/cACgkQCwJExA0N
Qxw6Qg//atuqFrmKzmlzces5pHmM88+RpkKDjA2e0Ltr8to8IWMg8gzr3o2qQ1aw
/zKTCxWtd7PHQiJXmG9LV5z4UefT3rfV7TQfRTlH6XLe+T9wdBVREMUp4HaPeYq7
Q+u9NIe570ylBUVYznh40SsgSV9YJtAztxDrU39YidmuYEwDCbIwmIFRHMgClRLF
KgtE1tc0iuFE5Ru/kQwd+MBZBHnA/Zf1S8YiM5AIncRx/9f4EgoMAWcbUHQYFRjS
W+mlyLR3/UjeB0LUCLiwoXjDvUoga3RA1A6Nf9/7CC7pqRAXHdGFMxCLOJfy1AGh
n4MNwxQA4yJDXUCS9zhQLob0n75NKJDKbLJ9PlP42IaJXK8KbRM8UcXRRob+ywjT
xL476F5D49TO2YRS00vMyBor06MUa0cT3HLQKDdv6IdKEbUhpiHUFL9h9nxISnAN
rFC/y4vrYfpJrR7BF/dK3zs98d9u+lEDxbsKxB7dZ/gvzMIDr2QU0/RiAhurdzz6
7kswA2ZTBfJkJ2o9+8W9E4jJIORV51b8ep+nmv/aiFfCjLwCrPF0/J63l5Pd/Bgr
xDXlydtGVmVSGiM5Vq5CmuFlDJzPD+ZDZLbpxpRmLZPsDjAJS5Zo1wIdtbbZ1hI5
vbvPf9jadsR9WiBjohC09u6J34GwTsWcTW9aLZBUyzjmo07hYV0=
=r9GV
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-next-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest update from Shuah Khan:
"Fixes to build errors, false negatives, and several code cleanups,
including the ARRAY_SIZE cleanup that removes 25+ duplicates
ARRAY_SIZE defines from individual tests"
* tag 'linux-kselftest-next-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/vm: remove ARRAY_SIZE define from individual tests
selftests/timens: remove ARRAY_SIZE define from individual tests
selftests/sparc64: remove ARRAY_SIZE define from adi-test
selftests/seccomp: remove ARRAY_SIZE define from seccomp_benchmark
selftests/rseq: remove ARRAY_SIZE define from individual tests
selftests/net: remove ARRAY_SIZE define from individual tests
selftests/landlock: remove ARRAY_SIZE define from common.h
selftests/ir: remove ARRAY_SIZE define from ir_loopback.c
selftests/core: remove ARRAY_SIZE define from close_range_test.c
selftests/cgroup: remove ARRAY_SIZE define from cgroup_util.h
selftests/arm64: remove ARRAY_SIZE define from vec-syscfg.c
tools: fix ARRAY_SIZE defines in tools and selftests hdrs
selftests: cgroup: build error multiple outpt files
selftests/move_mount_set_group remove unneeded conversion to bool
selftests/mount: remove unneeded conversion to bool
selftests: harness: avoid false negatives if test has no ASSERTs
selftests/ftrace: make kprobe profile testcase description unique
selftests: clone3: clone3: add case CLONE3_ARGS_NO_TEST
selftests: timers: Remove unneeded semicolon
kselftests: timers:Remove unneeded semicolon
- Improve seccomp selftests in support of signal handler refactoring (Kees Cook)
-----BEGIN PGP SIGNATURE-----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=JeMn
-----END PGP SIGNATURE-----
Merge tag 'seccomp-v5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull seccomp updates from Kees Cook:
"The core seccomp code hasn't changed for this cycle, but the selftests
were improved while helping to debug the recent signal handling
refactoring work Eric did.
Summary:
- Improve seccomp selftests in support of signal handler refactoring
(Kees Cook)"
* tag 'seccomp-v5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
selftests/seccomp: Report event mismatches more clearly
selftests/seccomp: Stop USER_NOTIF test if kcmp() fails
In 'perf report', entering a recursive function from inside of itself
(either directly of indirectly through some other function) results in
calling symbol__annotate2 multiple() times, and freeing the whole
disassembly when exiting from the innermost instance.
The first issue causes the function's disassembly to be duplicated, and
the latter a heap use-after-free (and crash) when trying to access the
disassembly again.
I reproduced the bug on perf 5.11.22 (Ubuntu 20.04.3 LTS) and 5.16.rc8
with the following testcase (compile with gcc recursive.c -o recursive).
To reproduce:
- perf record ./recursive
- perf report
- enter fibonacci and annotate it
- move the cursor on one of the "callq fibonacci" instructions and press enter
- at this point there will be two copies of the function in the disassembly
- go back by pressing q, and perf will crash
#include <stdio.h>
int fibonacci(int n)
{
if(n <= 2) return 1;
return fibonacci(n-1) + fibonacci(n-2);
}
int main()
{
printf("%d\n", fibonacci(40));
}
This patch addresses the issue by annotating a function and freeing the
associated memory on exit only if no annotation is already present, so
that a recursive function is only annotated on entry.
Signed-off-by: Dario Petrillo <dario.pk1@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@kernel.org
Link: http://lore.kernel.org/lkml/20220109234441.325106-1-dario.pk1@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Update the arch_support_sort_key() function in powerpc to enable
presenting local and global variants of sort key 'p_stage_cyc'.
Update the "se_header" strings for these in arch_perf_header_entry()
along with instruction latency.
Reported-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20211203022038.48240-2-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Sort key 'p_stage_cyc' is used to present the latency cycles spent in
pipeline stages.
perf has local 'p_stage_cyc' sort key to display this info. There is no
global variant available for this sort key. The local variant shows
latency in a single sample, whereas the global value will be useful to
present the total latency (sum of latencies) in the hist entry. It
represents the latency number multiplied by the number of samples.
Add global ('p_stage_cyc') and local variant ('local_p_stage_cyc') for
this sort key. Use 'local_p_stage_cyc' as default option for "mem" sort
mode.
Also add this to the list of dynamic sort keys and made the
"dynamic_headers" and "arch_specific_sort_keys" as static.
Reported-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20211203022038.48240-1-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
from poison memory and error injection into SGX pages
- A bunch of changes to the SGX selftests to simplify and allow of SGX
features testing without the need of a whole SGX software stack
- Add a sysfs attribute which is supposed to show the amount of SGX
memory in a NUMA node, similar to what /proc/meminfo is to normal
memory
- The usual bunch of fixes and cleanups too
-----BEGIN PGP SIGNATURE-----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=vFTM
-----END PGP SIGNATURE-----
Merge tag 'x86_sgx_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 SGX updates from Borislav Petkov:
- Add support for handling hw errors in SGX pages: poisoning,
recovering from poison memory and error injection into SGX pages
- A bunch of changes to the SGX selftests to simplify and allow of SGX
features testing without the need of a whole SGX software stack
- Add a sysfs attribute which is supposed to show the amount of SGX
memory in a NUMA node, similar to what /proc/meminfo is to normal
memory
- The usual bunch of fixes and cleanups too
* tag 'x86_sgx_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
x86/sgx: Fix NULL pointer dereference on non-SGX systems
selftests/sgx: Fix corrupted cpuid macro invocation
x86/sgx: Add an attribute for the amount of SGX memory in a NUMA node
x86/sgx: Fix minor documentation issues
selftests/sgx: Add test for multiple TCS entry
selftests/sgx: Enable multiple thread support
selftests/sgx: Add page permission and exception test
selftests/sgx: Rename test properties in preparation for more enclave tests
selftests/sgx: Provide per-op parameter structs for the test enclave
selftests/sgx: Add a new kselftest: Unclobbered_vdso_oversubscribed
selftests/sgx: Move setup_test_encl() to each TEST_F()
selftests/sgx: Encpsulate the test enclave creation
selftests/sgx: Dump segments and /proc/self/maps only on failure
selftests/sgx: Create a heap for the test enclave
selftests/sgx: Make data measurement for an enclave segment optional
selftests/sgx: Assign source for each segment
selftests/sgx: Fix a benign linker warning
x86/sgx: Add check for SGX pages to ghes_do_memory_failure()
x86/sgx: Add hook to error injection address validation
x86/sgx: Hook arch_memory_failure() into mainline code
...
- KCSAN enabled for arm64.
- Additional kselftests to exercise the syscall ABI w.r.t. SVE/FPSIMD.
- Some more SVE clean-ups and refactoring in preparation for SME support
(scalable matrix extensions).
- BTI clean-ups (SYM_FUNC macros etc.)
- arm64 atomics clean-up and codegen improvements.
- HWCAPs for FEAT_AFP (alternate floating point behaviour) and
FEAT_RPRESS (increased precision of reciprocal estimate and reciprocal
square root estimate).
- Use SHA3 instructions to speed-up XOR.
- arm64 unwind code refactoring/unification.
- Avoid DC (data cache maintenance) instructions when DCZID_EL0.DZP == 1
(potentially set by a hypervisor; user-space already does this).
- Perf updates for arm64: support for CI-700, HiSilicon PCIe PMU,
Marvell CN10K LLC-TAD PMU, miscellaneous clean-ups.
- Other fixes and clean-ups; highlights: fix the handling of erratum
1418040, correct the calculation of the nomap region boundaries,
introduce io_stop_wc() mapped to the new DGH instruction (data
gathering hint).
-----BEGIN PGP SIGNATURE-----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=ecyi
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
- KCSAN enabled for arm64.
- Additional kselftests to exercise the syscall ABI w.r.t. SVE/FPSIMD.
- Some more SVE clean-ups and refactoring in preparation for SME
support (scalable matrix extensions).
- BTI clean-ups (SYM_FUNC macros etc.)
- arm64 atomics clean-up and codegen improvements.
- HWCAPs for FEAT_AFP (alternate floating point behaviour) and
FEAT_RPRESS (increased precision of reciprocal estimate and
reciprocal square root estimate).
- Use SHA3 instructions to speed-up XOR.
- arm64 unwind code refactoring/unification.
- Avoid DC (data cache maintenance) instructions when DCZID_EL0.DZP ==
1 (potentially set by a hypervisor; user-space already does this).
- Perf updates for arm64: support for CI-700, HiSilicon PCIe PMU,
Marvell CN10K LLC-TAD PMU, miscellaneous clean-ups.
- Other fixes and clean-ups; highlights: fix the handling of erratum
1418040, correct the calculation of the nomap region boundaries,
introduce io_stop_wc() mapped to the new DGH instruction (data
gathering hint).
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (81 commits)
arm64: Use correct method to calculate nomap region boundaries
arm64: Drop outdated links in comments
arm64: perf: Don't register user access sysctl handler multiple times
drivers: perf: marvell_cn10k: fix an IS_ERR() vs NULL check
perf/smmuv3: Fix unused variable warning when CONFIG_OF=n
arm64: errata: Fix exec handling in erratum 1418040 workaround
arm64: Unhash early pointer print plus improve comment
asm-generic: introduce io_stop_wc() and add implementation for ARM64
arm64: Ensure that the 'bti' macro is defined where linkage.h is included
arm64: remove __dma_*_area() aliases
docs/arm64: delete a space from tagged-address-abi
arm64: Enable KCSAN
kselftest/arm64: Add pidbench for floating point syscall cases
arm64/fp: Add comments documenting the usage of state restore functions
kselftest/arm64: Add a test program to exercise the syscall ABI
kselftest/arm64: Allow signal tests to trigger from a function
kselftest/arm64: Parameterise ptrace vector length information
arm64/sve: Minor clarification of ABI documentation
arm64/sve: Generalise vector length configuration prctl() for SME
arm64/sve: Make sysctl interface for SVE reusable by SME
...
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for net-next. This
includes one patch to update ovs and act_ct to use nf_ct_put() instead
of nf_conntrack_put().
1) Add netns_tracker to nfnetlink_log and masquerade, from Eric Dumazet.
2) Remove redundant rcu read-size lock in nf_tables packet path.
3) Replace BUG() by WARN_ON_ONCE() in nft_payload.
4) Consolidate rule verdict tracing.
5) Replace WARN_ON() by WARN_ON_ONCE() in nf_tables core.
6) Make counter support built-in in nf_tables.
7) Add new field to conntrack object to identify locally generated
traffic, from Florian Westphal.
8) Prevent NAT from shadowing well-known ports, from Florian Westphal.
9) Merge nf_flow_table_{ipv4,ipv6} into nf_flow_table_inet, also from
Florian.
10) Remove redundant pointer in nft_pipapo AVX2 support, from Colin Ian King.
11) Replace opencoded max() in conntrack, from Jiapeng Chong.
12) Update conntrack to use refcount_t API, from Florian Westphal.
13) Move ip_ct_attach indirection into the nf_ct_hook structure.
14) Constify several pointer object in the netfilter codebase,
from Florian Westphal.
15) Tree-wide replacement of nf_conntrack_put() by nf_ct_put(), also
from Florian.
16) Fix egress splat due to incorrect rcu notation, from Florian.
17) Move stateful fields of connlimit, last, quota, numgen and limit
out of the expression data area.
18) Build a blob to represent the ruleset in nf_tables, this is a
requirement of the new register tracking infrastructure.
19) Add NFT_REG32_NUM to define the maximum number of 32-bit registers.
20) Add register tracking infrastructure to skip redundant
store-to-register operations, this includes support for payload,
meta and bitwise expresssions.
* git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next: (32 commits)
netfilter: nft_meta: cancel register tracking after meta update
netfilter: nft_payload: cancel register tracking after payload update
netfilter: nft_bitwise: track register operations
netfilter: nft_meta: track register operations
netfilter: nft_payload: track register operations
netfilter: nf_tables: add register tracking infrastructure
netfilter: nf_tables: add NFT_REG32_NUM
netfilter: nf_tables: add rule blob layout
netfilter: nft_limit: move stateful fields out of expression data
netfilter: nft_limit: rename stateful structure
netfilter: nft_numgen: move stateful fields out of expression data
netfilter: nft_quota: move stateful fields out of expression data
netfilter: nft_last: move stateful fields out of expression data
netfilter: nft_connlimit: move stateful fields out of expression data
netfilter: egress: avoid a lockdep splat
net: prefer nf_ct_put instead of nf_conntrack_put
netfilter: conntrack: avoid useless indirection during conntrack destruction
netfilter: make function op structures const
netfilter: core: move ip_ct_attach indirection to struct nf_ct_hook
netfilter: conntrack: convert to refcount_t api
...
====================
Link: https://lore.kernel.org/r/20220109231640.104123-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Revert "libtraceevent: Increase libtraceevent logging when verbose", breaks the build
with libtraceevent-1.3.0, i.e. when building with 'LIBTRACEEVENT_DYNAMIC=1'.
- Avoid early exit in 'perf trace' due to running SIGCHLD handler before it
makes sense to. It can happen when using a BPF source code event that have
to be first built into an object file.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCYdrrXQAKCRCyPKLppCJ+
J1KLAPwKLu7Mxj5sc0EMB3WJr48PUTaAzNt9GYhfxuok3x6bBgEAvXQL5olib/0A
9sLhZrKVHqeQKApgFtkzOVT6DoNVwwg=
=0r49
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v5.16-2022-01-09' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Revert "libtraceevent: Increase libtraceevent logging when verbose",
breaks the build with libtraceevent-1.3.0, i.e. when building with
'LIBTRACEEVENT_DYNAMIC=1'.
- Avoid early exit in 'perf trace' due to running SIGCHLD handler
before it makes sense to. It can happen when using a BPF source code
event that have to be first built into an object file.
* tag 'perf-tools-fixes-for-v5.16-2022-01-09' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
Revert "libtraceevent: Increase libtraceevent logging when verbose"
perf trace: Avoid early exit due to running SIGCHLD handler before it makes sense to
MPTCP join self-tests are a bit fragile as they reply on
delays instead of events to catch-up with the expected
sockets states.
Replace the delay with state checking where possible and
reduce the number of sleeps in the most complex scenarios.
This will both reduce the tests run-time and will improve
stability.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit 08efcb4a63.
This breaks the build as it will prefer using libbpf-devel header files,
even when not using LIBBPF_DYNAMIC=1, breaking the build.
This was detected on OpenSuSE Tumbleweed with libtraceevent-devel 1.3.0,
as described by Jiri Slaby:
=======================================================================
It breaks build with LIBTRACEEVENT_DYNAMIC and version 1.3.0:
> util/debug.c: In function ‘perf_debug_option’:
> util/debug.c:243:17: error: implicit declaration of function
‘tep_set_loglevel’ [-Werror=implicit-function-declaration]
> 243 | tep_set_loglevel(TEP_LOG_INFO);
> | ^~~~~~~~~~~~~~~~
> util/debug.c:243:34: error: ‘TEP_LOG_INFO’ undeclared (first use in this
function); did you mean ‘TEP_PRINT_INFO’?
> 243 | tep_set_loglevel(TEP_LOG_INFO);
> | ^~~~~~~~~~~~
> | TEP_PRINT_INFO
> util/debug.c:243:34: note: each undeclared identifier is reported only once
for each function it appears in
> util/debug.c:245:34: error: ‘TEP_LOG_DEBUG’ undeclared (first use in this
function)
> 245 | tep_set_loglevel(TEP_LOG_DEBUG);
> | ^~~~~~~~~~~~~
> util/debug.c:247:34: error: ‘TEP_LOG_ALL’ undeclared (first use in this
function)
> 247 | tep_set_loglevel(TEP_LOG_ALL);
> | ^~~~~~~~~~~
It is because the gcc's command line looks like:
gcc
...
-I/home/abuild/rpmbuild/BUILD/tools/lib/
...
-DLIBTRACEEVENT_VERSION=65790
...
=======================================================================
The proper way to fix this is more involved and so not suitable for this
late in the 5.16-rc stage.
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/lkml/bc2b0786-8965-1bcd-2316-9d9bb37b9c31@kernel.org
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: https://lore.kernel.org/lkml/YddGjjmlMZzxUZbN@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When running 'perf trace' with an BPF object like:
# perf trace -e openat,tools/perf/examples/bpf/hello.c
the event parsing eventually calls llvm__get_kbuild_opts() that runs a
script and that ends up with SIGCHLD delivered to the 'perf trace'
handler, which assumes the workload process is done and quits 'perf
trace'.
Move the SIGCHLD handler setup directly to trace__run(), where the event
is parsed and the object is already compiled.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Christy Lee <christyc.y.lee@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20220106222030.227499-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now that core kvm_util declarations have special home in
kvm_util_base.h, move ucall-related declarations out into a separate
header.
Signed-off-by: Michael Roth <michael.roth@amd.com>
Message-Id: <20211210164620.11636-3-michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Between helper macros and interfaces that will be introduced in
subsequent patches, much of kvm_util.h would end up being declarations
specific to ucall. Ideally these could be separated out into a separate
header since they are not strictly required for writing guest tests and
are mostly self-contained interfaces other than a reliance on a few
core declarations like struct kvm_vm. This doesn't make a big
difference as far as how tests will be compiled/written since all these
interfaces will still be packaged up into a single/common libkvm.a used
by all tests, but it is still nice to be able to compartmentalize to
improve readabilty and reduce merge conflicts in the future for common
tasks like adding new interfaces to kvm_util.h.
Furthermore, some of the ucall declarations will be arch-specific,
requiring various #ifdef'ery in kvm_util.h. Ideally these declarations
could live in separate arch-specific headers, e.g.
include/<arch>/ucall.h, which would handle arch-specific declarations
as well as pulling in common ucall-related declarations shared by all
archs.
One simple way to do this would be to #include ucall.h at the bottom of
kvm_util.h, after declarations it relies upon like struct kvm_vm.
This is brittle however, and doesn't scale easily to other sets of
interfaces that may be added in the future.
Instead, move all declarations currently in kvm_util.h into
kvm_util_base.h, then have kvm_util.h #include it. With this change,
non-base declarations can be selectively moved/introduced into separate
headers, which can then be included in kvm_util.h so that individual
tests don't need to be touched. Subsequent patches will then move
ucall-related declarations into a separate header to meet the above
goals.
Signed-off-by: Michael Roth <michael.roth@amd.com>
Message-Id: <20211210164620.11636-2-michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This adds basic support for delivering 2 level event channels to a guest.
Initially, it only supports delivery via the IRQ routing table, triggered
by an eventfd. In order to do so, it has a kvm_xen_set_evtchn_fast()
function which will use the pre-mapped shared_info page if it already
exists and is still valid, while the slow path through the irqfd_inject
workqueue will remap the shared_info page if necessary.
It sets the bits in the shared_info page but not the vcpu_info; that is
deferred to __kvm_xen_has_interrupt() which raises the vector to the
appropriate vCPU.
Add a 'verbose' mode to xen_shinfo_test while adding test cases for this.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20211210163625.2886-5-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add tests to confirm mirror vms can only run correct subset of commands.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Marc Orr <marcorr@google.com>
Signed-off-by: Peter Gonda <pgonda@google.com>
Message-Id: <20211208191642.3792819-4-pgonda@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
TEST_ASSERT in SEV ioctl was allowing errors because it checked return
value was good OR the FW error code was OK. This TEST_ASSERT should
require both (aka. AND) values are OK. Removes the LAUNCH_START from the
mirror VM because this call correctly fails because mirror VMs cannot
call this command. Currently issues with the PSP driver functions mean
the firmware error is not always reset to SEV_RET_SUCCESS when a call is
successful. Mainly sev_platform_init() doesn't correctly set the fw
error if the platform has already been initialized.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Marc Orr <marcorr@google.com>
Signed-off-by: Peter Gonda <pgonda@google.com>
Message-Id: <20211208191642.3792819-3-pgonda@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Mirrors should not be able to call LAUNCH_START. Remove the call on the
mirror to correct the test before fixing sev_ioctl() to correctly assert
on this failed ioctl.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Marc Orr <marcorr@google.com>
Signed-off-by: Peter Gonda <pgonda@google.com>
Message-Id: <20211208191642.3792819-2-pgonda@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Use common KVM implementation of MMU memory caches
- SBI v0.2 support for Guest
- Initial KVM selftests support
- Fix to avoid spurious virtual interrupts after clearing hideleg CSR
- Update email address for Anup and Atish
-----BEGIN PGP SIGNATURE-----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=Ao1E
-----END PGP SIGNATURE-----
Merge tag 'kvm-riscv-5.17-1' of https://github.com/kvm-riscv/linux into HEAD
KVM/riscv changes for 5.17, take #1
- Use common KVM implementation of MMU memory caches
- SBI v0.2 support for Guest
- Initial KVM selftests support
- Fix to avoid spurious virtual interrupts after clearing hideleg CSR
- Update email address for Anup and Atish
- Simplification of the 'vcpu first run' by integrating it into
KVM's 'pid change' flow
- Refactoring of the FP and SVE state tracking, also leading to
a simpler state and less shared data between EL1 and EL2 in
the nVHE case
- Tidy up the header file usage for the nvhe hyp object
- New HYP unsharing mechanism, finally allowing pages to be
unmapped from the Stage-1 EL2 page-tables
- Various pKVM cleanups around refcounting and sharing
- A couple of vgic fixes for bugs that would trigger once
the vcpu xarray rework is merged, but not sooner
- Add minimal support for ARMv8.7's PMU extension
- Rework kvm_pgtable initialisation ahead of the NV work
- New selftest for IRQ injection
- Teach selftests about the lack of default IPA space and
page sizes
- Expand sysreg selftest to deal with Pointer Authentication
- The usual bunch of cleanups and doc update
-----BEGIN PGP SIGNATURE-----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=HkZk
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for Linux 5.16
- Simplification of the 'vcpu first run' by integrating it into
KVM's 'pid change' flow
- Refactoring of the FP and SVE state tracking, also leading to
a simpler state and less shared data between EL1 and EL2 in
the nVHE case
- Tidy up the header file usage for the nvhe hyp object
- New HYP unsharing mechanism, finally allowing pages to be
unmapped from the Stage-1 EL2 page-tables
- Various pKVM cleanups around refcounting and sharing
- A couple of vgic fixes for bugs that would trigger once
the vcpu xarray rework is merged, but not sooner
- Add minimal support for ARMv8.7's PMU extension
- Rework kvm_pgtable initialisation ahead of the NV work
- New selftest for IRQ injection
- Teach selftests about the lack of default IPA space and
page sizes
- Expand sysreg selftest to deal with Pointer Authentication
- The usual bunch of cleanups and doc update
Verify that, when multiple endpoints are available, subflows
creation proceed even when the first additional subflow creation
fails - due to packet drop on the relevant link
Co-developed-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Include into the path manager status a bitmap tracking the list
of local endpoints still available - not yet used - for the
relevant mptcp socket.
Keep such map updated at endpoint creation/deletion time, so
that we can easily skip already used endpoint at local address
selection time.
The endpoint used by the initial subflow is lazyly accounted at
subflow creation time: the usage bitmap is be up2date before
endpoint selection and we avoid such unneeded task in some relevant
scenarios - e.g. busy servers accepting incoming subflows but
not creating any additional ones nor annuncing additional addresses.
Overall this allows for fair local endpoints usage in case of
subflow failure.
As a side effect, this patch also enforces that each endpoint
is used at most once for each mptcp connection.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Performs several disconnect/reconnect on the same socket,
ensuring the overall transfer is succesful.
The new test leverages ioctl(SIOCOUTQ) to ensure all the
pending data is acked before disconnecting.
Additionally order alphabetically the test program arguments list
for better maintainability.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Refcount leak in ipt_CLUSTERIP rule loading path, from Xin Xiong.
2) Use socat in netfilter selftests, from Hangbin Liu.
3) Skip layer checksum 4 update for IP fragments.
4) Missing allocation of pcpu scratch maps on clone in
nft_set_pipapo, from Florian Westphal.
* git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf:
netfilter: nft_set_pipapo: allocate pcpu scratch maps on clone
netfilter: nft_payload: do not update layer 4 checksum when mangling fragments
selftests: netfilter: switch to socat for tests using -q option
netfilter: ipt_CLUSTERIP: fix refcount leak in clusterip_tg_check()
====================
Link: https://lore.kernel.org/r/20220106215139.170824-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2022-01-06
We've added 41 non-merge commits during the last 2 day(s) which contain
a total of 36 files changed, 1214 insertions(+), 368 deletions(-).
The main changes are:
1) Various fixes in the verifier, from Kris and Daniel.
2) Fixes in sockmap, from John.
3) bpf_getsockopt fix, from Kuniyuki.
4) INET_POST_BIND fix, from Menglong.
5) arm64 JIT fix for bpf pseudo funcs, from Hou.
6) BPF ISA doc improvements, from Christoph.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (41 commits)
bpf: selftests: Add bind retry for post_bind{4, 6}
bpf: selftests: Use C99 initializers in test_sock.c
net: bpf: Handle return value of BPF_CGROUP_RUN_PROG_INET{4,6}_POST_BIND()
bpf/selftests: Test bpf_d_path on rdonly_mem.
libbpf: Add documentation for bpf_map batch operations
selftests/bpf: Don't rely on preserving volatile in PT_REGS macros in loop3
xdp: Add xdp_do_redirect_frame() for pre-computed xdp_frames
xdp: Move conversion to xdp_frame out of map functions
page_pool: Store the XDP mem id
page_pool: Add callback to init pages when they are allocated
xdp: Allow registering memory model without rxq reference
samples/bpf: xdpsock: Add timestamp for Tx-only operation
samples/bpf: xdpsock: Add time-out for cleaning Tx
samples/bpf: xdpsock: Add sched policy and priority support
samples/bpf: xdpsock: Add cyclic TX operation capability
samples/bpf: xdpsock: Add clockid selection support
samples/bpf: xdpsock: Add Dest and Src MAC setting for Tx-only operation
samples/bpf: xdpsock: Add VLAN support for Tx-only operation
libbpf 1.0: Deprecate bpf_object__find_map_by_offset() API
libbpf 1.0: Deprecate bpf_map__is_offload_neutral()
...
====================
Link: https://lore.kernel.org/r/20220107013626.53943-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With previous patch, kernel is able to 'put_port' after sys_bind()
fails. Add the test for that case: rebind another port after
sys_bind() fails. If the bind success, it means previous bind
operation is already undoed.
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220106132022.3470772-4-imagedong@tencent.com
The second parameter of bpf_d_path() can only accept writable
memories. Rdonly_mem obtained from bpf_per_cpu_ptr() can not
be passed into bpf_d_path for modification. This patch adds
a selftest to verify this behavior.
Signed-off-by: Hao Luo <haoluo@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220106205525.2116218-1-haoluo@google.com
This adds documention for:
- bpf_map_delete_batch()
- bpf_map_lookup_batch()
- bpf_map_lookup_and_delete_batch()
- bpf_map_update_batch()
This also updates the public API for the `keys` parameter
of `bpf_map_delete_batch()`, and both the
`keys` and `values` parameters of `bpf_map_update_batch()`
to be constants.
Signed-off-by: Grant Seltzer <grantseltzer@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220106201304.112675-1-grantseltzer@gmail.com
PT_REGS*() macro on some architectures force-cast struct pt_regs to
other types (user_pt_regs, etc) and might drop volatile modifiers, if any.
Volatile isn't really required as pt_regs value isn't supposed to change
during the BPF program run, so this is correct behavior.
But progs/loop3.c relies on that volatile modifier to ensure that loop
is preserved. Fix loop3.c by declaring i and sum variables as volatile
instead. It preserves the loop and makes the test pass on all
architectures (including s390x which is currently broken).
Fixes: 3cc31d7940 ("libbpf: Normalize PT_REGS_xxx() macro definitions")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220106205156.955373-1-andrii@kernel.org
When a task is writing to an fd opened by a different task, the perm check
should use the cgroup namespace of the latter task. Add a test for it.
Tested-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
When a task is writing to an fd opened by a different task, the perm check
should use the credentials of the latter task. Add a test for it.
Tested-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
0644 is an odd perm to create a cgroup which is a directory. Use the regular
0755 instead. This is necessary for euid switching test case.
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Eric Dumazet suggested to allow users to modify max GRO packet size.
We have seen GRO being disabled by users of appliances (such as
wifi access points) because of claimed bufferbloat issues,
or some work arounds in sch_cake, to split GRO/GSO packets.
Instead of disabling GRO completely, one can chose to limit
the maximum packet size of GRO packets, depending on their
latency constraints.
This patch adds a per device gro_max_size attribute
that can be changed with ip link command.
ip link set dev eth0 gro_max_size 16000
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Coco Li <lixiaoyan@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We add initial support for RISC-V 64-bit in KVM selftests using
which we can cross-compile and run arch independent tests such as:
demand_paging_test
dirty_log_test
kvm_create_max_vcpus,
kvm_page_table_test
set_memory_region_test
kvm_binary_stats_test
All VM guest modes defined in kvm_util.h require at least 48-bit
guest virtual address so to use KVM RISC-V selftests hardware
need to support at least Sv48 MMU for guest (i.e. VS-mode).
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-and-tested-by: Atish Patra <atishp@rivosinc.com>
We add EXTRA_CFLAGS to the common CFLAGS of top-level Makefile which will
allow users to pass additional compile-time flags such as "-static".
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-and-tested-by: Atish Patra <atishp@rivosinc.com>
Reviewed-and-tested-by: Sean Christopherson <seanjc@google.com>
The nc cmd(nmap-ncat) that distributed with Fedora/Red Hat does not have
option -q. This make some tests failed with:
nc: invalid option -- 'q'
Let's switch to socat which is far more dependable.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
When the -L option of the testptp utility is specified with other
options (e.g. -p to enable PPS output), the user probably wants to
apply it to the pin configured by the -L option.
Reorder the code to set the pin function before other function requests
to avoid confusing users.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Link: https://lore.kernel.org/r/20220105152506.3256026-1-mlichvar@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If repeated legacy kprobes on same function in one process,
libbpf will register using the same probe name and got -EBUSY
error. So append index to the probe name format to fix this
problem.
Co-developed-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Qiang Wang <wangqiang.wq.frank@bytedance.com>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211227130713.66933-2-wangqiang.wq.frank@bytedance.com
With perf_buffer__poll() and perf_buffer__consume() APIs available,
there is no reason to expose bpf_perf_event_read_simple() API to
users. If users need custom perf buffer, they could re-implement
the function.
Mark bpf_perf_event_read_simple() and move the logic to a new
static function so it can still be called by other functions in the
same file.
[0] Closes: https://github.com/libbpf/libbpf/issues/310
Signed-off-by: Christy Lee <christylee@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211229204156.13569-1-christylee@fb.com
Current release - regressions:
- Revert "xsk: Do not sleep in poll() when need_wakeup set",
made the problem worse
- Revert "net: phy: fixed_phy: Fix NULL vs IS_ERR() checking in
__fixed_phy_register", broke EPROBE_DEFER handling
- Revert "net: usb: r8152: Add MAC pass-through support for more
Lenovo Docks", broke setups without a Lenovo dock
Current release - new code bugs:
- selftests: set amt.sh executable
Previous releases - regressions:
- batman-adv: mcast: don't send link-local multicast to mcast routers
Previous releases - always broken:
- ipv4/ipv6: check attribute length for RTA_FLOW / RTA_GATEWAY
- sctp: hold endpoint before calling cb in
sctp_transport_lookup_process
- mac80211: mesh: embed mesh_paths and mpp_paths into
ieee80211_if_mesh to avoid complicated handling of sub-object
allocation failures
- seg6: fix traceroute in the presence of SRv6
- tipc: fix a kernel-infoleak in __tipc_sendmsg()
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=xIOF
-----END PGP SIGNATURE-----
Merge tag 'net-5.16-final' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski"
"Networking fixes, including fixes from bpf, and WiFi. One last pull
request, turns out some of the recent fixes did more harm than good.
Current release - regressions:
- Revert "xsk: Do not sleep in poll() when need_wakeup set", made the
problem worse
- Revert "net: phy: fixed_phy: Fix NULL vs IS_ERR() checking in
__fixed_phy_register", broke EPROBE_DEFER handling
- Revert "net: usb: r8152: Add MAC pass-through support for more
Lenovo Docks", broke setups without a Lenovo dock
Current release - new code bugs:
- selftests: set amt.sh executable
Previous releases - regressions:
- batman-adv: mcast: don't send link-local multicast to mcast routers
Previous releases - always broken:
- ipv4/ipv6: check attribute length for RTA_FLOW / RTA_GATEWAY
- sctp: hold endpoint before calling cb in
sctp_transport_lookup_process
- mac80211: mesh: embed mesh_paths and mpp_paths into
ieee80211_if_mesh to avoid complicated handling of sub-object
allocation failures
- seg6: fix traceroute in the presence of SRv6
- tipc: fix a kernel-infoleak in __tipc_sendmsg()"
* tag 'net-5.16-final' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (36 commits)
selftests: set amt.sh executable
Revert "net: usb: r8152: Add MAC passthrough support for more Lenovo Docks"
sfc: The RX page_ring is optional
iavf: Fix limit of total number of queues to active queues of VF
i40e: Fix incorrect netdev's real number of RX/TX queues
i40e: Fix for displaying message regarding NVM version
i40e: fix use-after-free in i40e_sync_filters_subtask()
i40e: Fix to not show opcode msg on unsuccessful VF MAC change
ieee802154: atusb: fix uninit value in atusb_set_extended_addr
mac80211: mesh: embedd mesh_paths and mpp_paths into ieee80211_if_mesh
mac80211: initialize variable have_higher_than_11mbit
sch_qfq: prevent shift-out-of-bounds in qfq_init_qdisc
netrom: fix copying in user data in nr_setsockopt
udp6: Use Segment Routing Header for dest address if present
icmp: ICMPV6: Examine invoking packet for Segment Route Headers.
seg6: export get_srh() for ICMP handling
Revert "net: phy: fixed_phy: Fix NULL vs IS_ERR() checking in __fixed_phy_register"
ipv6: Do cleanup if attribute validation fails in multipath route
ipv6: Continue processing multipath route even if gateway attribute is invalid
net/fsl: Remove leftover definition in xgmac_mdio
...
Add a new test case with mem_or_null typed register with off > 0 to ensure
it gets rejected by the verifier:
# ./test_verifier 1011
#1009/u check with invalid reg offset 0 OK
#1009/p check with invalid reg offset 0 OK
Summary: 2 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
amt.sh test script will not work because it doesn't have execution
permission. So, it adds execution permission.
Reported-by: Hangbin Liu <liuhangbin@gmail.com>
Fixes: c08e8baea7 ("selftests: add amt interface selftest script")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Link: https://lore.kernel.org/r/20220105144436.13415-1-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Existing test cases determine secureboot state using efi variable, which
is available only on x86 architecture. Add support for determining
secureboot state using device tree property on PowerNV architecture.
Signed-off-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
Reviewed-by: Nayna Jain <nayna@linux.ibm.com>
Tested-by: Nayna Jain <nayna@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
The tc_redirect umounts /sys in the new namespace, which can be
mounted as shared and cause global umount. The lazy umount also
takes down mounted trees under /sys like debugfs, which won't be
available after sysfs mounts again and could cause fails in other
tests.
# cat /proc/self/mountinfo | grep debugfs
34 23 0:7 / /sys/kernel/debug rw,nosuid,nodev,noexec,relatime shared:14 - debugfs debugfs rw
# cat /proc/self/mountinfo | grep sysfs
23 86 0:22 / /sys rw,nosuid,nodev,noexec,relatime shared:2 - sysfs sysfs rw
# mount | grep debugfs
debugfs on /sys/kernel/debug type debugfs (rw,nosuid,nodev,noexec,relatime)
# ./test_progs -t tc_redirect
#164 tc_redirect:OK
Summary: 1/4 PASSED, 0 SKIPPED, 0 FAILED
# mount | grep debugfs
# cat /proc/self/mountinfo | grep debugfs
# cat /proc/self/mountinfo | grep sysfs
25 86 0:22 / /sys rw,relatime shared:2 - sysfs sysfs rw
Making the sysfs private under the new namespace so the umount won't
trigger the global sysfs umount.
Reported-by: Hangbin Liu <haliu@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jussi Maki <joamaki@gmail.com>
Link: https://lore.kernel.org/bpf/20220104121030.138216-1-jolsa@kernel.org
This patch introduces new probes to check whether the kernel supports
instruction set extensions v2 and v3. The first introduced eBPF
instructions BPF_J{LT,LE,SLT,SLE} in commit 92b31a9af7 ("bpf: add
BPF_J{LT,LE,SLT,SLE} instructions"). The second introduces 32-bit
variants of all jump instructions in commit 092ed0968b ("bpf:
verifier support JMP32").
These probes are useful for userspace BPF projects that want to use newer
instruction set extensions on newer kernels, to reduce the programs'
sizes or their complexity. LLVM already provides an mcpu=probe option to
automatically probe the kernel and select the newest-supported
instruction set extension. That is however not flexible enough for all
use cases. For example, in Cilium, we only want to use the v3
instruction set extension on v5.10+, even though it is supported on all
kernels v5.1+.
Signed-off-by: Paul Chaignon <paul@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/3bfedcd9898c1f41ac67ca61f144fec84c6c3a92.1641314075.git.paul@isovalent.com
This patch introduces a new probe to check whether the verifier supports
bounded loops as introduced in commit 2589726d12 ("bpf: introduce
bounded loops"). This patch will allow BPF users such as Cilium to probe
for loop support on startup and only unconditionally unroll loops on
older kernels.
The results are displayed as part of the miscellaneous section, as shown
below.
$ bpftool feature probe | grep loops
Bounded loop support is available
$ bpftool feature probe macro | grep LOOPS
#define HAVE_BOUNDED_LOOPS
$ bpftool feature probe -j | jq .misc
{
"have_large_insn_limit": true,
"have_bounded_loops": true
}
Signed-off-by: Paul Chaignon <paul@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/f7807c0b27d79f48e71de7b5a99c680ca4bd0151.1641314075.git.paul@isovalent.com
There is currently a single miscellaneous feature probe,
HAVE_LARGE_INSN_LIMIT, to check for the 1M instructions limit in the
verifier. Subsequent patches will add additional miscellaneous probes,
which follow the same pattern at the existing probe. This patch
therefore refactors the probe to avoid code duplication in subsequent
patches.
The BPF program type and the checked error numbers in the
HAVE_LARGE_INSN_LIMIT probe are changed to better generalize to other
probes. The feature probe retains its current behavior despite those
changes.
Signed-off-by: Paul Chaignon <paul@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/956c9329a932c75941194f91790d01f31dfbe01b.1641314075.git.paul@isovalent.com
* kvm-arm64/selftest/irq-injection:
: .
: New tests from Ricardo Koller:
: "This series adds a new test, aarch64/vgic-irq, that validates the injection of
: different types of IRQs from userspace using various methods and configurations"
: .
KVM: selftests: aarch64: Add test for restoring active IRQs
KVM: selftests: aarch64: Add ISPENDR write tests in vgic_irq
KVM: selftests: aarch64: Add tests for IRQFD in vgic_irq
KVM: selftests: Add IRQ GSI routing library functions
KVM: selftests: aarch64: Add test_inject_fail to vgic_irq
KVM: selftests: aarch64: Add tests for LEVEL_INFO in vgic_irq
KVM: selftests: aarch64: Level-sensitive interrupts tests in vgic_irq
KVM: selftests: aarch64: Add preemption tests in vgic_irq
KVM: selftests: aarch64: Cmdline arg to set EOI mode in vgic_irq
KVM: selftests: aarch64: Cmdline arg to set number of IRQs in vgic_irq test
KVM: selftests: aarch64: Abstract the injection functions in vgic_irq
KVM: selftests: aarch64: Add vgic_irq to test userspace IRQ injection
KVM: selftests: aarch64: Add vGIC library functions to deal with vIRQ state
KVM: selftests: Add kvm_irq_line library function
KVM: selftests: aarch64: Add GICv3 register accessor library functions
KVM: selftests: aarch64: Add function for accessing GICv3 dist and redist registers
KVM: selftests: aarch64: Move gic_v3.h to shared headers
Signed-off-by: Marc Zyngier <maz@kernel.org>
The get-reg-list test ignores the Pointer Authentication features,
which is a shame now that we have relatively common HW with this feature.
Define two new configurations (with and without PMU) that exercise the
KVM capabilities.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Link: https://lore.kernel.org/r/20211228121414.1013250-1-maz@kernel.org
- Fix TUI exit screen refresh race condition in 'perf top'.
- Fix parsing of Intel PT VM time correlation arguments.
- Honour CPU filtering command line request of a script's switch events in
'perf script'.
- Fix printing of switch events in Intel PT python script.
- Fix duplicate alias events list printing in 'perf list', noticed on
heterogeneous arm64 systems.
- Fix return value of ids__new(), users expect NULL for failure, not
ERR_PTR(-ENOMEM).
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCYdHBrgAKCRCyPKLppCJ+
J8C0AQDT9JKQlNPMETD5F2leq0YB5O3wGKwMvgff0hyblArU7QD/Yq7d1XgMkshF
lb2dEJfGIyClnrgtTo9nikraESM5JwE=
=RTLi
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v5.16-2022-01-02' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix TUI exit screen refresh race condition in 'perf top'.
- Fix parsing of Intel PT VM time correlation arguments.
- Honour CPU filtering command line request of a script's switch events
in 'perf script'.
- Fix printing of switch events in Intel PT python script.
- Fix duplicate alias events list printing in 'perf list', noticed on
heterogeneous arm64 systems.
- Fix return value of ids__new(), users expect NULL for failure, not
ERR_PTR(-ENOMEM).
* tag 'perf-tools-fixes-for-v5.16-2022-01-02' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf top: Fix TUI exit screen refresh race condition
perf pmu: Fix alias events list
perf scripts python: intel-pt-events.py: Fix printing of switch events
perf script: Fix CPU filtering of a script's switch events
perf intel-pt: Fix parsing of VM time correlation arguments
perf expr: Fix return value of ids__new()
When the following command is executed several times, a coredump file is
generated.
$ timeout -k 9 5 perf top -e task-clock
*******
*******
*******
0.01% [kernel] [k] __do_softirq
0.01% libpthread-2.28.so [.] __pthread_mutex_lock
0.01% [kernel] [k] __ll_sc_atomic64_sub_return
double free or corruption (!prev) perf top --sort comm,dso
timeout: the monitored command dumped core
When we terminate "perf top" using sending signal method,
SLsmg_reset_smg() called. SLsmg_reset_smg() resets the SLsmg screen
management routines by freeing all memory allocated while it was active.
However SLsmg_reinit_smg() maybe be called by another thread.
SLsmg_reinit_smg() will free the same memory accessed by
SLsmg_reset_smg(), thus it results in a double free.
SLsmg_reinit_smg() is called already protected by ui__lock, so we fix
the problem by adding pthread_mutex_trylock of ui__lock when calling
SLsmg_reset_smg().
Signed-off-by: Wenyu Liu <liuwenyu7@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: wuxu.wu@huawei.com
Link: http://lore.kernel.org/lkml/a91e3943-7ddc-f5c0-a7f5-360f073c20e6@huawei.com
Signed-off-by: Hewenliang <hewenliang4@huawei.com>
Signed-off-by: yaowenbin <yaowenbin1@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit 0e0ae87422 ("perf list: Display hybrid PMU events with cpu
type") changes the event list for uncore PMUs or arm64 heterogeneous CPU
systems, such that duplicate aliases are incorrectly listed per PMU
(which they should not be), like:
# perf list
...
unc_cbo_cache_lookup.any_es
[Unit: uncore_cbox L3 Lookup any request that access cache and found
line in E or S-state]
unc_cbo_cache_lookup.any_es
[Unit: uncore_cbox L3 Lookup any request that access cache and found
line in E or S-state]
unc_cbo_cache_lookup.any_i
[Unit: uncore_cbox L3 Lookup any request that access cache and found
line in I-state]
unc_cbo_cache_lookup.any_i
[Unit: uncore_cbox L3 Lookup any request that access cache and found
line in I-state]
...
Notice how the events are listed twice.
The named commit changed how we remove duplicate events, in that events
for different PMUs are not treated as duplicates. I suppose this is to
handle how "Each hybrid pmu event has been assigned with a pmu name".
Fix PMU alias listing by restoring behaviour to remove duplicates for
non-hybrid PMUs.
Fixes: 0e0ae87422 ("perf list: Display hybrid PMU events with cpu type")
Signed-off-by: John Garry <john.garry@huawei.com>
Tested-by: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/1640103090-140490-1-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As Paolo pointed out, the result of ping IPv6 address depends on
the running distro. So explicitly checking the available ping feature,
as e.g. do the bareudp.sh self-tests.
Fixes: 8b3170e075 ("selftests: net: using ping6 for IPv6 in udpgro_fwd.sh")
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Link: https://lore.kernel.org/r/825ee22b-4245-dbf7-d2f7-a230770d6e21@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf 2021-12-31
We've added 2 non-merge commits during the last 14 day(s) which contain
a total of 2 files changed, 3 insertions(+), 3 deletions(-).
The main changes are:
1) Revert of an earlier attempt to fix xsk's poll() behavior where it
turned out that the fix for a rare problem made it much worse in
general, from Magnus Karlsson. (Fyi, Magnus mentioned that a proper
fix is coming early next year, so the revert is mainly to avoid
slipping the behavior into 5.16.)
2) Minor misc spell fix in BPF selftests, from Colin Ian King.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf, selftests: Fix spelling mistake "tained" -> "tainted"
Revert "xsk: Do not sleep in poll() when need_wakeup set"
====================
Link: https://lore.kernel.org/r/20211231160050.16105-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
First check /lib/modules/`uname -r`/config, before using the IKCONFIG.
In addition, the configs.ko might be compressed. Fix the configs.ko
name.
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Instead of assigning the string to a variable, which might contain a
null character, redirect the output and grep for the string directly.
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Currently, userfaultfd selftest for hugetlb as run from run_vmtests.sh
or any environment where there are 'just enough' hugetlb pages will
always fail with:
testing events (fork, remap, remove):
ERROR: UFFDIO_COPY error: -12 (errno=12, line=616)
The ENOMEM error code implies there are not enough hugetlb pages.
However, there are free hugetlb pages but they are all reserved. There
is a basic problem with the way the test allocates hugetlb pages which
has existed since the test was originally written.
Due to the way 'cleanup' was done between different phases of the test,
this issue was masked until recently. The issue was uncovered by commit
8ba6e86408 ("userfaultfd/selftests: reinitialize test context in each
test").
For the hugetlb test, src and dst areas are allocated as PRIVATE
mappings of a hugetlb file. This means that at mmap time, pages are
reserved for the src and dst areas. At the start of event testing (and
other tests) the src area is populated which results in allocation of
huge pages to fill the area and consumption of reserves associated with
the area. Then, a child is forked to fault in the dst area. Note that
the dst area was allocated in the parent and hence the parent owns the
reserves associated with the mapping. The child has normal access to
the dst area, but can not use the reserves created/owned by the parent.
Thus, if there are no other huge pages available allocation of a page
for the dst by the child will fail.
Fix by not creating reserves for the dst area. In this way the child
can use free (non-reserved) pages.
Also, MAP_PRIVATE of a file only makes sense if you are interested in
the contents of the file before making a COW copy. The test does not do
this. So, just use MAP_ANONYMOUS | MAP_HUGETLB to create an anonymous
hugetlb mapping. There is no need to create a hugetlb file in the
non-shared case.
Link: https://lkml.kernel.org/r/20211217172919.7861-1-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2021-12-30
The following pull-request contains BPF updates for your *net-next* tree.
We've added 72 non-merge commits during the last 20 day(s) which contain
a total of 223 files changed, 3510 insertions(+), 1591 deletions(-).
The main changes are:
1) Automatic setrlimit in libbpf when bpf is memcg's in the kernel, from Andrii.
2) Beautify and de-verbose verifier logs, from Christy.
3) Composable verifier types, from Hao.
4) bpf_strncmp helper, from Hou.
5) bpf.h header dependency cleanup, from Jakub.
6) get_func_[arg|ret|arg_cnt] helpers, from Jiri.
7) Sleepable local storage, from KP.
8) Extend kfunc with PTR_TO_CTX, PTR_TO_MEM argument support, from Kumar.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
commit 077cdda764 ("net/mlx5e: TC, Fix memory leak with rules with internal port")
commit 31108d142f ("net/mlx5: Fix some error handling paths in 'mlx5e_tc_add_fdb_flow()'")
commit 4390c6edc0 ("net/mlx5: Fix some error handling paths in 'mlx5e_tc_add_fdb_flow()'")
https://lore.kernel.org/all/20211229065352.30178-1-saeed@kernel.org/
net/smc/smc_wr.c
commit 49dc9013e3 ("net/smc: Use the bitmap API when applicable")
commit 349d43127d ("net/smc: fix kernel panic caused by race of smc_sock")
bitmap_zero()/memset() is removed by the fix
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
udpgro_fwd.sh output following message:
ping: 2001:db8:1:💯 Address family for hostname not supported
Using ping6 when pinging IPv6 addresses.
Fixes: a062260a9d ("selftests: net: add UDP GRO forwarding self-tests")
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove the spin lock logic and update the selftests to use sleepable
programs to use a mix of sleepable and non-sleepable programs. It's more
useful to test the sleepable programs since the tests don't really need
spinlocks.
Signed-off-by: KP Singh <kpsingh@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20211224152916.1550677-3-kpsingh@kernel.org
udpgso_bench_tx call setup_sockaddr() for dest address before
parsing all arguments, if we specify "-p ${dst_port}" after "-D ${dst_ip}",
then ${dst_port} will be ignored, and using default cfg_port 8000.
This will cause test case "multiple GRO socks" failed in udpgro.sh.
Setup sockaddr after parsing all arguments.
Fixes: 3a687bef14 ("selftests: udp gso benchmark")
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/ff620d9f-5b52-06ab-5286-44b945453002@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ubuntu reports incorrect kernel version through uname(), which on older
kernels leads to kprobe BPF programs failing to load due to the version
check mismatch.
Accommodate Ubuntu's quirks with LINUX_VERSION_CODE by using
Ubuntu-specific /proc/version_code to fetch major/minor/patch versions
to form LINUX_VERSION_CODE.
While at it, consolide libbpf's kernel version detection code between
libbpf.c and libbpf_probes.c.
[0] Closes: https://github.com/libbpf/libbpf/issues/421
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20211222231003.2334940-1-andrii@kernel.org
Improve bpf_tracing.h's macro definition readability by keeping them
single-line and better aligned. This makes it easier to follow all those
variadic patterns.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20211222213924.1869758-2-andrii@kernel.org
Refactor PT_REGS macros definitions in bpf_tracing.h to avoid excessive
duplication. We currently have classic PT_REGS_xxx() and CO-RE-enabled
PT_REGS_xxx_CORE(). We are about to add also _SYSCALL variants, which
would require excessive copying of all the per-architecture definitions.
Instead, separate architecture-specific field/register names from the
final macro that utilize them. That way for upcoming _SYSCALL variants
we'll be able to just define x86_64 exception and otherwise have one
common set of _SYSCALL macro definitions common for all architectures.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/bpf/20211222213924.1869758-1-andrii@kernel.org
The intel-pt-events.py script displays only the last of consecutive switch
statements but that may not be the last switch event for the CPU. Fix by
keeping a dictionary of last context switch keyed by CPU, and make it
possible to see all switch events by adding option --all-switch-events.
Fixes: a92bf335fd ("perf scripts python: intel-pt-events.py: Add branches to script")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20211215080636.149562-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
CPU filtering was not being applied to a script's switch events.
Fixes: 5bf83c29a0 ("perf script: Add scripting operation process_switch()")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20211215080636.149562-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Parser did not take ':' into account.
Example:
Before:
$ perf record -e intel_pt//u uname
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.026 MB perf.data ]
$ perf inject -i perf.data --vm-time-correlation="dry-run 123"
$ perf inject -i perf.data --vm-time-correlation="dry-run 123:456"
Failed to parse VM Time Correlation options
0x620 [0x98]: failed to process type: 70 [Invalid argument]
$
After:
$ perf inject -i perf.data --vm-time-correlation="dry-run 123:456"
$
Fixes: e3ff42bdeb ("perf intel-pt: Parse VM Time Correlation options and set up decoding")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20211215080636.149562-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
callers of ids__new() function only do NULL checking for the return
value. ids__new() calles hashmap__new(), which may return
ERR_PTR(-ENOMEM).
Instead of changing the checking one-by-one return NULL instead of
ERR_PTR(-ENOMEM) to keep it consistent.
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: German Gomez <german.gomez@arm.com>
Tested-by: German Gomez <german.gomez@arm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20211214011030.20200-1-linmq006@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a test that restores multiple IRQs in active state, it does it by
writing into ISACTIVER from the guest and using KVM ioctls. This test
tries to emulate what would happen during a live migration: restore
active IRQs.
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Acked-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211109023906.1091208-18-ricarkol@google.com
Add injection tests that use writing into the ISPENDR register (to mark
IRQs as pending). This is typically used by migration code.
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Acked-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211109023906.1091208-17-ricarkol@google.com
Add an architecture independent wrapper function for creating and
writing IRQ GSI routing tables. Also add a function to add irqchip
entries.
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Acked-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211109023906.1091208-15-ricarkol@google.com
Add tests for failed injections to vgic_irq. This tests that KVM can
handle bogus IRQ numbers.
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Acked-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211109023906.1091208-14-ricarkol@google.com
