Building the rseq basic test with
gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.12)
Target: powerpc-linux-gnu
leads to these errors:
/tmp/ccieEWxU.s: Assembler messages:
/tmp/ccieEWxU.s:118: Error: syntax error; found `,', expected `('
/tmp/ccieEWxU.s:118: Error: junk at end of line: `,8'
/tmp/ccieEWxU.s:121: Error: syntax error; found `,', expected `('
/tmp/ccieEWxU.s:121: Error: junk at end of line: `,8'
/tmp/ccieEWxU.s:626: Error: syntax error; found `,', expected `('
/tmp/ccieEWxU.s:626: Error: junk at end of line: `,8'
/tmp/ccieEWxU.s:629: Error: syntax error; found `,', expected `('
/tmp/ccieEWxU.s:629: Error: junk at end of line: `,8'
/tmp/ccieEWxU.s:735: Error: syntax error; found `,', expected `('
/tmp/ccieEWxU.s:735: Error: junk at end of line: `,8'
/tmp/ccieEWxU.s:738: Error: syntax error; found `,', expected `('
/tmp/ccieEWxU.s:738: Error: junk at end of line: `,8'
/tmp/ccieEWxU.s:741: Error: syntax error; found `,', expected `('
/tmp/ccieEWxU.s:741: Error: junk at end of line: `,8'
Makefile:581: recipe for target 'basic_percpu_ops_test.o' failed
Based on discussion with Linux powerpc maintainers and review of
the use of the "m" operand in powerpc kernel code, add the missing
%Un%Xn (where n is operand number) to the lwz, stw, ld, and std
instructions when used with "m" operands.
Using "WORD" to mean either a 32-bit or 64-bit type depending on
the architecture is misleading. The term "WORD" really means a
32-bit type in both 32-bit and 64-bit powerpc assembler. The intent
here is to wrap load/store to intptr_t into common macros for both
32-bit and 64-bit.
Rename the macros with a RSEQ_ prefix, and use the terms "INT"
for always 32-bit type, and "LONG" for architecture bitness-sized
type.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220124171253.22072-10-mathieu.desnoyers@efficios.com
ppc32 incorrectly uses padding as rseq_cs pointer field. Fix this by
using the rseq_cs.arch.ptr field.
Use this field across all architectures.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220124171253.22072-9-mathieu.desnoyers@efficios.com
glibc-2.35 (upcoming release date 2022-02-01) exposes the rseq per-thread
data in the TCB, accessible at an offset from the thread pointer, rather
than through an actual Thread-Local Storage (TLS) variable, as the
Linux kernel selftests initially expected.
The __rseq_abi TLS and glibc-2.35's ABI for per-thread data cannot
actively coexist in a process, because the kernel supports only a single
rseq registration per thread.
Here is the scheme introduced to ensure selftests can work both with an
older glibc and with glibc-2.35+:
- librseq exposes its own "rseq_offset, rseq_size, rseq_flags" ABI.
- librseq queries for glibc rseq ABI (__rseq_offset, __rseq_size,
__rseq_flags) using dlsym() in a librseq library constructor. If those
are found, copy their values into rseq_offset, rseq_size, and
rseq_flags.
- Else, if those glibc symbols are not found, handle rseq registration
from librseq and use its own IE-model TLS to implement the rseq ABI
per-thread storage.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220124171253.22072-8-mathieu.desnoyers@efficios.com
This is done in preparation for the selftest uplift to become compatible
with glibc-2.35.
glibc-2.35 exposes the rseq per-thread data in the TCB, accessible
at an offset from the thread pointer.
The toolchains do not implement accessing the thread pointer on all
architectures. Provide thread pointer getters for ppc and x86 which
lack (or lacked until recently) toolchain support.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220124171253.22072-7-mathieu.desnoyers@efficios.com
This is done in preparation for the selftest uplift to become compatible
with glibc-2.35.
glibc-2.35 exposes the rseq per-thread data in the TCB, accessible
at an offset from the thread pointer, rather than through an actual
Thread-Local Storage (TLS) variable, as the kernel selftests initially
expected.
Introduce a rseq_get_abi() helper, initially using the __rseq_abi
TLS variable, in preparation for changing this userspace ABI for one
which is compatible with glibc-2.35.
Note that the __rseq_abi TLS and glibc-2.35's ABI for per-thread data
cannot actively coexist in a process, because the kernel supports only
a single rseq registration per thread.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220124171253.22072-6-mathieu.desnoyers@efficios.com
This is done in preparation for the selftest uplift to become compatible
with glibc-2.35.
All accesses to the __rseq_abi fields are volatile, but remove the
volatile from the TLS variable declaration, otherwise we are stuck with
volatile for the upcoming rseq_get_abi() helper.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220124171253.22072-5-mathieu.desnoyers@efficios.com
The Linux kernel rseq uapi header has a broken layout for the
rseq_cs.ptr field on 32-bit little endian architectures. The entire
rseq_cs.ptr field is planned for removal, leaving only the 64-bit
rseq_cs.ptr64 field available.
Both glibc and librseq use their own copy of the Linux kernel uapi
header, where they introduce proper union fields to access to the 32-bit
low order bits of the rseq_cs pointer on 32-bit architectures.
Introduce a copy of the Linux kernel uapi headers in the Linux kernel
selftests.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220124171253.22072-2-mathieu.desnoyers@efficios.com
- Fix printing 'phys_addr' in 'perf script'.
- Fix failure to add events with 'perf probe' in ppc64 due to not removing
leading dot (ppc64 ABIv1).
- Fix cpu_map__item() python binding building.
- Support event alias in form foo-bar-baz, add pmu-events and parse-event tests
for it.
- No need to setup affinities when starting a workload or attaching to a pid.
- Use path__join() to compose a path instead of ad-hoc snprintf() equivalent.
- Override attr->sample_period for non-libpfm4 events.
- Use libperf cpumap APIs instead of accessing the internal state directly.
- Sync x86 arch prctl headers and files changed by the new
set_mempolicy_home_node syscall with the kernel sources.
- Remove duplicate include in cpumap.h.
- Remove redundant err variable.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCYeytiAAKCRCyPKLppCJ+
JyxZAQDNopdDHXLcUaa2Yp8M97QZQ31APY4vOSkn+AneVuBxvAEAs+BPCyBKWCHA
o45Hit7BzOtb3erHN5XVLTNW3WNBIQM=
=RdC6
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-for-v5.17-2022-01-22' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull more perf tools updates from Arnaldo Carvalho de Melo:
- Fix printing 'phys_addr' in 'perf script'.
- Fix failure to add events with 'perf probe' in ppc64 due to not
removing leading dot (ppc64 ABIv1).
- Fix cpu_map__item() python binding building.
- Support event alias in form foo-bar-baz, add pmu-events and
parse-event tests for it.
- No need to setup affinities when starting a workload or attaching to
a pid.
- Use path__join() to compose a path instead of ad-hoc snprintf()
equivalent.
- Override attr->sample_period for non-libpfm4 events.
- Use libperf cpumap APIs instead of accessing the internal state
directly.
- Sync x86 arch prctl headers and files changed by the new
set_mempolicy_home_node syscall with the kernel sources.
- Remove duplicate include in cpumap.h.
- Remove redundant err variable.
* tag 'perf-tools-for-v5.17-2022-01-22' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf tools: Remove redundant err variable
perf test: Add parse-events test for aliases with hyphens
perf test: Add pmu-events test for aliases with hyphens
perf parse-events: Support event alias in form foo-bar-baz
perf evsel: Override attr->sample_period for non-libpfm4 events
perf cpumap: Remove duplicate include in cpumap.h
perf cpumap: Migrate to libperf cpumap api
perf python: Fix cpu_map__item() building
perf script: Fix printing 'phys_addr' failure issue
tools headers UAPI: Sync files changed by new set_mempolicy_home_node syscall
tools headers UAPI: Sync x86 arch prctl headers with the kernel sources
perf machine: Use path__join() to compose a path instead of snprintf(dir, '/', filename)
perf evlist: No need to setup affinities when disabling events for pid targets
perf evlist: No need to setup affinities when enabling events for pid targets
perf stat: No need to setup affinities when starting a workload
perf affinity: Allow passing a NULL arg to affinity__cleanup()
perf probe: Fix ppc64 'perf probe add events failed' case
-----BEGIN PGP SIGNATURE-----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=RKW4
-----END PGP SIGNATURE-----
Merge tag 'bitmap-5.17-rc1' of git://github.com/norov/linux
Pull bitmap updates from Yury Norov:
- introduce for_each_set_bitrange()
- use find_first_*_bit() instead of find_next_*_bit() where possible
- unify for_each_bit() macros
* tag 'bitmap-5.17-rc1' of git://github.com/norov/linux:
vsprintf: rework bitmap_list_string
lib: bitmap: add performance test for bitmap_print_to_pagebuf
bitmap: unify find_bit operations
mm/percpu: micro-optimize pcpu_is_populated()
Replace for_each_*_bit_from() with for_each_*_bit() where appropriate
find: micro-optimize for_each_{set,clear}_bit()
include/linux: move for_each_bit() macros from bitops.h to find.h
cpumask: replace cpumask_next_* with cpumask_first_* where appropriate
tools: sync tools/bitmap with mother linux
all: replace find_next{,_zero}_bit with find_first{,_zero}_bit where appropriate
cpumask: use find_first_and_bit()
lib: add find_first_and_bit()
arch: remove GENERIC_FIND_FIRST_BIT entirely
include: move find.h from asm_generic to linux
bitops: move find_bit_*_le functions from le.h to find.h
bitops: protect find_first_{,zero}_bit properly
Return value from perf_event__process_tracing_data() directly instead
of taking this in another redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20220112080109.666800-1-chi.minghao@zte.com.cn
Signed-off-by: CGEL ZTE <cgel.zte@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a test which allows us to test parsing an event alias with hyphens.
Since these events typically do not exist on most host systems, add the
alias to the fake pmu.
Function perf_pmu__test_parse_init() has terms added to match known test
aliases.
Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Liu <liuqi115@huawei.com>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: linuxarm@huawei.com
Link: https://lore.kernel.org/r/1642432215-234089-4-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a test for aliases with hyphens in the name to ensure that the
pmu-events tables are as expects. There should be no reason why these sort
of aliases would be treated differently, but no harm in checking.
Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Liu <liuqi115@huawei.com>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: linuxarm@huawei.com
Link: https://lore.kernel.org/r/1642432215-234089-3-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Event aliasing for events whose name in the form foo-bar-baz is not
supported, while foo-bar, foo_bar_baz, and other combinations are, i.e.
two hyphens are not supported.
The HiSilicon D06 platform has events in such form:
$ ./perf list sdir-home-migrate
List of pre-defined events (to be used in -e):
uncore hha:
sdir-home-migrate
[Unit: hisi_sccl,hha]
$ sudo ./perf stat -e sdir-home-migrate
event syntax error: 'sdir-home-migrate'
\___ parser error
Run 'perf list' for a list of valid events
Usage: perf stat [<options>] [<command>]
-e, --event <event>event selector. use 'perf list' to list available events
To support, add an extra PMU event symbol type for "baz", and add a new
rule in the bison file.
Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Liu <liuqi115@huawei.com>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: linuxarm@huawei.com
Link: https://lore.kernel.org/r/1642432215-234089-2-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A previous patch preventing "attr->sample_period" values from being
overridden in pfm events changed a related behaviour in arm-spe.
Before said patch:
perf record -c 10000 -e arm_spe_0// -- sleep 1
Would yield an SPE event with period=10000. After the patch, the period
in "-c 10000" was being ignored because the arm-spe code initializes
sample_period to a non-zero value.
This patch restores the previous behaviour for non-libpfm4 events.
Fixes: ae5dcc8abe (“perf record: Prevent override of attr->sample_period for libpfm4 events”)
Reported-by: Chase Conklin <chase.conklin@arm.com>
Signed-off-by: German Gomez <german.gomez@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20220118144054.2541-1-german.gomez@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Remove all but the first include of stdbool.h from cpumap.h.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20220117083730.863200-1-lv.ruyi@zte.com.cn
Signed-off-by: CGEL ZTE <cgel.zte@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Switch from directly accessing the perf_cpu_map to using the appropriate
libperf API when possible. Using the API simplifies the job of
refactoring use of perf_cpu_map.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: André Almeida <andrealmeid@collabora.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Miaoqian Lin <linmq006@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Shunsuke Nakamura <nakamura.shun@fujitsu.com>
Cc: Song Liu <song@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yury Norov <yury.norov@gmail.com>
Link: http://lore.kernel.org/lkml/20220122045811.3402706-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Value should be built as an integer.
Switch some uses of perf_cpu_map to use the library API.
Fixes: 6d18804b96 ("perf cpumap: Give CPUs their own type")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: André Almeida <andrealmeid@collabora.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Miaoqian Lin <linmq006@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Shunsuke Nakamura <nakamura.shun@fujitsu.com>
Cc: Song Liu <song@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yury Norov <yury.norov@gmail.com>
Link: http://lore.kernel.org/lkml/20220122045811.3402706-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Perf script was failed to print the phys_addr for SPE profiling.
One 'dummy' event is added by SPE profiling but it doesn't have PHYS_ADDR
attribute set, perf script then exits with error.
Now referring to 'addr', use evsel__do_check_stype() to check the type.
Before:
# perf record -e arm_spe_0/branch_filter=0,ts_enable=1,pa_enable=1,load_filter=1,jitter=0,\
store_filter=0,min_latency=0,event_filter=2/ -p 4064384 -- sleep 3
# perf script -F pid,tid,addr,phys_addr
Samples for 'dummy:u' event do not have PHYS_ADDR attribute set. Cannot print 'phys_addr' field.
After:
# perf record -e arm_spe_0/branch_filter=0,ts_enable=1,pa_enable=1,load_filter=1,jitter=0,\
store_filter=0,min_latency=0,event_filter=2/ -p 4064384 -- sleep 3
# perf script -F pid,tid,addr,phys_addr
4064384/4064384 ffff802f921be0d0 2f921be0d0
4064384/4064384 ffff802f921be0d0 2f921be0d0
Reviewed-by: German Gomez <german.gomez@arm.com>
Signed-off-by: Yao Jin <jinyao5@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20220121065954.2121900-1-liwei391@huawei.com
Signed-off-by: Wei Li <liwei391@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
- selftest compilation fix for non-x86
- KVM: avoid warning on s390 in mark_page_dirty
x86:
- fix page write-protection bug and improve comments
- use binary search to lookup the PMU event filter, add test
- enable_pmu module parameter support for Intel CPUs
- switch blocked_vcpu_on_cpu_lock to raw spinlock
- cleanups of blocked vCPU logic
- partially allow KVM_SET_CPUID{,2} after KVM_RUN (5.16 regression)
- various small fixes
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmHpmT0UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOstggAi1VSpT43oGslQjXNDZacHEARoYQs
b0XpoW7HXicGSGRMWspCmiAPdJyYTsioEACttAmXUMs7brAgHb9n/vzdlcLh1ymL
rQw2YFQlfqqB1Ki1iRhNkWlH9xOECsu28WLng6ylrx51GuT/pzWRt+V3EGUFTxIT
ldW9HgZg2oFJIaLjg2hQVR/8EbBf0QdsAD3KV3tyvhBlXPkyeLOMcGe9onfjZ/NE
JQeW7FtKtP4SsIFt1KrJpDPjtiwFt3bRM0gfgGw7//clvtKIqt1LYXZiq4C3b7f5
tfYiC8lO2vnOoYcfeYEmvybbSsoS/CgSliZB32qkwoVvRMIl82YmxtDD+Q==
=/Mak
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull more kvm updates from Paolo Bonzini:
"Generic:
- selftest compilation fix for non-x86
- KVM: avoid warning on s390 in mark_page_dirty
x86:
- fix page write-protection bug and improve comments
- use binary search to lookup the PMU event filter, add test
- enable_pmu module parameter support for Intel CPUs
- switch blocked_vcpu_on_cpu_lock to raw spinlock
- cleanups of blocked vCPU logic
- partially allow KVM_SET_CPUID{,2} after KVM_RUN (5.16 regression)
- various small fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (46 commits)
docs: kvm: fix WARNINGs from api.rst
selftests: kvm/x86: Fix the warning in lib/x86_64/processor.c
selftests: kvm/x86: Fix the warning in pmu_event_filter_test.c
kvm: selftests: Do not indent with spaces
kvm: selftests: sync uapi/linux/kvm.h with Linux header
selftests: kvm: add amx_test to .gitignore
KVM: SVM: Nullify vcpu_(un)blocking() hooks if AVIC is disabled
KVM: SVM: Move svm_hardware_setup() and its helpers below svm_x86_ops
KVM: SVM: Drop AVIC's intermediate avic_set_running() helper
KVM: VMX: Don't do full kick when handling posted interrupt wakeup
KVM: VMX: Fold fallback path into triggering posted IRQ helper
KVM: VMX: Pass desired vector instead of bool for triggering posted IRQ
KVM: VMX: Don't do full kick when triggering posted interrupt "fails"
KVM: SVM: Skip AVIC and IRTE updates when loading blocking vCPU
KVM: SVM: Use kvm_vcpu_is_blocking() in AVIC load to handle preemption
KVM: SVM: Remove unnecessary APICv/AVIC update in vCPU unblocking path
KVM: SVM: Don't bother checking for "running" AVIC when kicking for IPIs
KVM: SVM: Signal AVIC doorbell iff vCPU is in guest mode
KVM: x86: Remove defunct pre_block/post_block kvm_x86_ops hooks
KVM: x86: Unexport LAPIC's switch_to_{hv,sw}_timer() helpers
...
The following warning appears when executing
make -C tools/testing/selftests/kvm
include/x86_64/processor.h:290:2: warning: 'ecx' may be used uninitialized in this
function [-Wmaybe-uninitialized]
asm volatile("cpuid"
^~~
lib/x86_64/processor.c:1523:21: note: 'ecx' was declared here
uint32_t eax, ebx, ecx, edx, max_ext_leaf;
Just initialize ecx to remove this warning.
Fixes: c8cc43c1ea ("selftests: KVM: avoid failures due to reserved HyperTransport region")
Signed-off-by: Jinrong Liang <cloudliang@tencent.com>
Message-Id: <20220119140325.59369-1-cloudliang@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The following warning appears when executing
make -C tools/testing/selftests/kvm
x86_64/pmu_event_filter_test.c: In function 'vcpu_supports_intel_br_retired':
x86_64/pmu_event_filter_test.c:241:28: warning: variable 'cpuid' set but not used [-Wunused-but-set-variable]
241 | struct kvm_cpuid2 *cpuid;
| ^~~~~
x86_64/pmu_event_filter_test.c: In function 'vcpu_supports_amd_zen_br_retired':
x86_64/pmu_event_filter_test.c:258:28: warning: variable 'cpuid' set but not used [-Wunused-but-set-variable]
258 | struct kvm_cpuid2 *cpuid;
| ^~~~~
Just delete the unused variables to stay away from warnings.
Fixes: dc7e75b3b3ee ("selftests: kvm/x86: Add test for KVM_SET_PMU_EVENT_FILTER")
Signed-off-by: Jinrong Liang <cloudliang@tencent.com>
Message-Id: <20220119133910.56285-1-cloudliang@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Current release - regressions:
- fix memory leaks in the skb free deferral scheme if upper layer
protocols are used, i.e. in-kernel TCP readers like TLS
Current release - new code bugs:
- nf_tables: fix NULL check typo in _clone() functions
- change the default to y for Vertexcom vendor Kconfig
- a couple of fixes to incorrect uses of ref tracking
- two fixes for constifying netdev->dev_addr
Previous releases - regressions:
- bpf:
- various verifier fixes mainly around register offset handling
when passed to helper functions
- fix mount source displayed for bpffs (none -> bpffs)
- bonding:
- fix extraction of ports for connection hash calculation
- fix bond_xmit_broadcast return value when some devices are down
- phy: marvell: add Marvell specific PHY loopback
- sch_api: don't skip qdisc attach on ingress, prevent ref leak
- htb: restore minimal packet size handling in rate control
- sfp: fix high power modules without diagnostic monitoring
- mscc: ocelot:
- don't let phylink re-enable TX PAUSE on the NPI port
- don't dereference NULL pointers with shared tc filters
- smsc95xx: correct reset handling for LAN9514
- cpsw: avoid alignment faults by taking NET_IP_ALIGN into account
- phy: micrel: use kszphy_suspend/_resume for irq aware devices,
avoid races with the interrupt
Previous releases - always broken:
- xdp: check prog type before updating BPF link
- smc: resolve various races around abnormal connection termination
- sit: allow encapsulated IPv6 traffic to be delivered locally
- axienet: fix init/reset handling, add missing barriers,
read the right status words, stop queues correctly
- add missing dev_put() in sock_timestamping_bind_phc()
Misc:
- ipv4: prevent accidentally passing RTO_ONLINK to
ip_route_output_key_hash() by sanitizing flags
- ipv4: avoid quadratic behavior in netns dismantle
- stmmac: dwmac-oxnas: add support for OX810SE
- fsl: xgmac_mdio: add workaround for erratum A-009885
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=XM4Y
-----END PGP SIGNATURE-----
Merge tag 'net-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, bpf.
Quite a handful of old regression fixes but most of those are
pre-5.16.
Current release - regressions:
- fix memory leaks in the skb free deferral scheme if upper layer
protocols are used, i.e. in-kernel TCP readers like TLS
Current release - new code bugs:
- nf_tables: fix NULL check typo in _clone() functions
- change the default to y for Vertexcom vendor Kconfig
- a couple of fixes to incorrect uses of ref tracking
- two fixes for constifying netdev->dev_addr
Previous releases - regressions:
- bpf:
- various verifier fixes mainly around register offset handling
when passed to helper functions
- fix mount source displayed for bpffs (none -> bpffs)
- bonding:
- fix extraction of ports for connection hash calculation
- fix bond_xmit_broadcast return value when some devices are down
- phy: marvell: add Marvell specific PHY loopback
- sch_api: don't skip qdisc attach on ingress, prevent ref leak
- htb: restore minimal packet size handling in rate control
- sfp: fix high power modules without diagnostic monitoring
- mscc: ocelot:
- don't let phylink re-enable TX PAUSE on the NPI port
- don't dereference NULL pointers with shared tc filters
- smsc95xx: correct reset handling for LAN9514
- cpsw: avoid alignment faults by taking NET_IP_ALIGN into account
- phy: micrel: use kszphy_suspend/_resume for irq aware devices,
avoid races with the interrupt
Previous releases - always broken:
- xdp: check prog type before updating BPF link
- smc: resolve various races around abnormal connection termination
- sit: allow encapsulated IPv6 traffic to be delivered locally
- axienet: fix init/reset handling, add missing barriers, read the
right status words, stop queues correctly
- add missing dev_put() in sock_timestamping_bind_phc()
Misc:
- ipv4: prevent accidentally passing RTO_ONLINK to
ip_route_output_key_hash() by sanitizing flags
- ipv4: avoid quadratic behavior in netns dismantle
- stmmac: dwmac-oxnas: add support for OX810SE
- fsl: xgmac_mdio: add workaround for erratum A-009885"
* tag 'net-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (92 commits)
ipv4: add net_hash_mix() dispersion to fib_info_laddrhash keys
ipv4: avoid quadratic behavior in netns dismantle
net/fsl: xgmac_mdio: Fix incorrect iounmap when removing module
powerpc/fsl/dts: Enable WA for erratum A-009885 on fman3l MDIO buses
dt-bindings: net: Document fsl,erratum-a009885
net/fsl: xgmac_mdio: Add workaround for erratum A-009885
net: mscc: ocelot: fix using match before it is set
net: phy: micrel: use kszphy_suspend()/kszphy_resume for irq aware devices
net: cpsw: avoid alignment faults by taking NET_IP_ALIGN into account
nfc: llcp: fix NULL error pointer dereference on sendmsg() after failed bind()
net: axienet: increase default TX ring size to 128
net: axienet: fix for TX busy handling
net: axienet: fix number of TX ring slots for available check
net: axienet: Fix TX ring slot available check
net: axienet: limit minimum TX ring size
net: axienet: add missing memory barriers
net: axienet: reset core on initialization prior to MDIO access
net: axienet: Wait for PhyRstCmplt after core reset
net: axienet: increase reset timeout
bpf, selftests: Add ringbuf memory type confusion test
...
Merge more updates from Andrew Morton:
"55 patches.
Subsystems affected by this patch series: percpu, procfs, sysctl,
misc, core-kernel, get_maintainer, lib, checkpatch, binfmt, nilfs2,
hfs, fat, adfs, panic, delayacct, kconfig, kcov, and ubsan"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (55 commits)
lib: remove redundant assignment to variable ret
ubsan: remove CONFIG_UBSAN_OBJECT_SIZE
kcov: fix generic Kconfig dependencies if ARCH_WANTS_NO_INSTR
lib/Kconfig.debug: make TEST_KMOD depend on PAGE_SIZE_LESS_THAN_256KB
btrfs: use generic Kconfig option for 256kB page size limit
arch/Kconfig: split PAGE_SIZE_LESS_THAN_256KB from PAGE_SIZE_LESS_THAN_64KB
configs: introduce debug.config for CI-like setup
delayacct: track delays from memory compact
Documentation/accounting/delay-accounting.rst: add thrashing page cache and direct compact
delayacct: cleanup flags in struct task_delay_info and functions use it
delayacct: fix incomplete disable operation when switch enable to disable
delayacct: support swapin delay accounting for swapping without blkio
panic: remove oops_id
panic: use error_report_end tracepoint on warnings
fs/adfs: remove unneeded variable make code cleaner
FAT: use io_schedule_timeout() instead of congestion_wait()
hfsplus: use struct_group_attr() for memcpy() region
nilfs2: remove redundant pointer sbufs
fs/binfmt_elf: use PT_LOAD p_align values for static PIE
const_structs.checkpatch: add frequently used ops structs
...
Delay accounting does not track the delay of memory compact. When there
is not enough free memory, tasks can spend a amount of their time
waiting for compact.
To get the impact of tasks in direct memory compact, measure the delay
when allocating memory through memory compact.
Also update tools/accounting/getdelays.c:
/ # ./getdelays_next -di -p 304
print delayacct stats ON
printing IO accounting
PID 304
CPU count real total virtual total delay total delay average
277 780000000 849039485 18877296 0.068ms
IO count delay total delay average
0 0 0ms
SWAP count delay total delay average
0 0 0ms
RECLAIM count delay total delay average
5 11088812685 2217ms
THRASHING count delay total delay average
0 0 0ms
COMPACT count delay total delay average
3 72758 0ms
watch: read=0, write=0, cancelled_write=0
Link: https://lkml.kernel.org/r/1638619795-71451-1-git-send-email-wang.yong12@zte.com.cn
Signed-off-by: wangyong <wang.yong12@zte.com.cn>
Reviewed-by: Jiang Xuexin <jiang.xuexin@zte.com.cn>
Reviewed-by: Zhang Wenya <zhang.wenya1@zte.com.cn>
Reviewed-by: Yang Yang <yang.yang29@zte.com.cn>
Reviewed-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "test_hash.c: refactor into KUnit", v3.
We refactored the lib/test_hash.c file into KUnit as part of the student
group LKCAMP [1] introductory hackathon for kernel development.
This test was pointed to our group by Daniel Latypov [2], so its full
conversion into a pure KUnit test was our goal in this patch series, but
we ran into many problems relating to it not being split as unit tests,
which complicated matters a bit, as the reasoning behind the original
tests is quite cryptic for those unfamiliar with hash implementations.
Some interesting developments we'd like to highlight are:
- In patch 1/5 we noticed that there was an unused define directive
that could be removed.
- In patch 4/5 we noticed how stringhash and hash tests are all under
the lib/test_hash.c file, which might cause some confusion, and we
also broke those kernel config entries up.
Overall KUnit developments have been made in the other patches in this
series:
In patches 2/5, 3/5 and 5/5 we refactored the lib/test_hash.c file so as
to make it more compatible with the KUnit style, whilst preserving the
original idea of the maintainer who designed it (i.e. George Spelvin),
which might be undesirable for unit tests, but we assume it is enough
for a first patch.
This patch (of 5):
Currently, there exist hash_32() and __hash_32() functions, which were
introduced in a patch [1] targeting architecture specific optimizations.
These functions can be overridden on a per-architecture basis to achieve
such optimizations. They must set their corresponding define directive
(HAVE_ARCH_HASH_32 and HAVE_ARCH__HASH_32, respectively) so that header
files can deal with these overrides properly.
As the supported 32-bit architectures that have their own hash function
implementation (i.e. m68k, Microblaze, H8/300, pa-risc) have only been
making use of the (more general) __hash_32() function (which only lacks
a right shift operation when compared to the hash_32() function), remove
the define directive corresponding to the arch-specific hash_32()
implementation.
[1] https://lore.kernel.org/lkml/20160525073311.5600.qmail@ns.sciencehorizons.net/
[akpm@linux-foundation.org: hash_32_generic() becomes hash_32()]
Link: https://lkml.kernel.org/r/20211208183711.390454-1-isabbasso@riseup.net
Link: https://lkml.kernel.org/r/20211208183711.390454-2-isabbasso@riseup.net
Reviewed-by: David Gow <davidgow@google.com>
Tested-by: David Gow <davidgow@google.com>
Co-developed-by: Augusto Durães Camargo <augusto.duraes33@gmail.com>
Signed-off-by: Augusto Durães Camargo <augusto.duraes33@gmail.com>
Co-developed-by: Enzo Ferreira <ferreiraenzoa@gmail.com>
Signed-off-by: Enzo Ferreira <ferreiraenzoa@gmail.com>
Signed-off-by: Isabella Basso <isabbasso@riseup.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Daniel Latypov <dlatypov@google.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Cc: kernel test robot <lkp@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As the sched:sched_switch tracepoint args are derived from the kernel,
we'd better make it same with the kernel. So the macro TASK_COMM_LEN is
converted to type enum, then all the BPF programs can get it through
BTF.
The BPF program which wants to use TASK_COMM_LEN should include the
header vmlinux.h. Regarding the test_stacktrace_map and
test_tracepoint, as the type defined in linux/bpf.h are also defined in
vmlinux.h, so we don't need to include linux/bpf.h again.
Link: https://lkml.kernel.org/r/20211120112738.45980-8-laoar.shao@gmail.com
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Arnaldo Carvalho de Melo <arnaldo.melo@gmail.com>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Michal Miroslaw <mirq-linux@rere.qmqm.pl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Kees Cook <keescook@chromium.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
bpf_probe_read_kernel_str() will add a nul terminator to the dst, then
we don't care about if the dst size is big enough.
Link: https://lkml.kernel.org/r/20211120112738.45980-7-laoar.shao@gmail.com
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Arnaldo Carvalho de Melo <arnaldo.melo@gmail.com>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Michal Miroslaw <mirq-linux@rere.qmqm.pl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Kees Cook <keescook@chromium.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
KVM_CAP_XSAVE2 is out of sync due to a conflict. Copy the whole
file while at it.
Reported-by: Yang Zhong <yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
amx_test's binary should be present in the .gitignore file for the git
to ignore it.
Fixes: bf70636d94 ("selftest: kvm: Add amx selftest")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Message-Id: <20220118122053.1941915-1-usama.anjum@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a VMX specific test to verify that KVM doesn't explode if userspace
attempts KVM_RUN when emulation is required with a pending exception.
KVM VMX's emulation support for !unrestricted_guest punts exceptions to
userspace instead of attempting to synthesize the exception with all the
correct state (and stack switching, etc...).
Punting is acceptable as there's never been a request to support
injecting exceptions when emulating due to invalid state, but KVM has
historically assumed that userspace will do the right thing and either
clear the exception or kill the guest. Deliberately do the opposite and
attempt to re-enter the guest with a pending exception and emulation
required to verify KVM continues to punt the combination to userspace,
e.g. doesn't explode, WARN, etc...
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211228232437.1875318-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Verify that the PMU event filter works as expected.
Note that the virtual PMU doesn't work as expected on AMD Zen CPUs (an
intercepted rdmsr is counted as a retired branch instruction), but the
PMU event filter does work.
Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220115052431.447232-7-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Extract the x86 model number from CPUID.01H:EAX.
Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220115052431.447232-6-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move this static inline function to processor.h, so that it can be
used in individual tests, as needed.
Opportunistically replace the bare 'unsigned' with 'unsigned int.'
Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220115052431.447232-5-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace the one ad hoc "AuthenticAMD" CPUID vendor string comparison
with a new function, is_amd_cpu().
Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220115052431.447232-4-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Refactor is_intel_cpu() to make it easier to reuse the bulk of the
code for other vendors in the future.
Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220115052431.447232-3-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
vm_xsave_req_perm() is currently defined and used by x86_64 only.
Make it compiled into vm_create_with_vcpus() only when on x86_64
machines. Otherwise, it would cause linkage errors, e.g. on s390x.
Fixes: 415a3c33e8 ("kvm: selftests: Add support for KVM_CAP_XSAVE2")
Reported-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Tested-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Message-Id: <20220118014817.30910-1-wei.w.wang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Its more intention revealing, and if we're interested in the odd cases
where this may end up truncating we can do debug checks at one
centralized place.
Motivation, of all the container builds, fedora rawhide started
complaining of:
util/machine.c: In function ‘machine__create_modules’:
util/machine.c:1419:50: error: ‘%s’ directive output may be truncated writing up to 255 bytes into a region of size between 0 and 4095 [-Werror=format-truncation=]
1419 | snprintf(path, sizeof(path), "%s/%s", dir_name, dent->d_name);
| ^~
In file included from /usr/include/stdio.h:894,
from util/branch.h:9,
from util/callchain.h:8,
from util/machine.c:7:
In function ‘snprintf’,
inlined from ‘maps__set_modules_path_dir’ at util/machine.c:1419:3,
inlined from ‘machine__set_modules_path’ at util/machine.c:1473:9,
inlined from ‘machine__create_modules’ at util/machine.c:1519:7:
/usr/include/bits/stdio2.h:71:10: note: ‘__builtin___snprintf_chk’ output between 2 and 4352 bytes into a destination of size 4096
There are other places where we should use path__join(), but lets get rid of
this one first.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Link: Link: https://lore.kernel.org/r/YebZKjwgfdOz0lAs@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Daniel Borkmann says:
====================
pull-request: bpf 2022-01-19
We've added 12 non-merge commits during the last 8 day(s) which contain
a total of 12 files changed, 262 insertions(+), 64 deletions(-).
The main changes are:
1) Various verifier fixes mainly around register offset handling when
passed to helper functions, from Daniel Borkmann.
2) Fix XDP BPF link handling to assert program type,
from Toke Høiland-Jørgensen.
3) Fix regression in mount parameter handling for BPF fs,
from Yafang Shao.
4) Fix incorrect integer literal when marking scratched stack slots
in verifier, from Christy Lee.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf, selftests: Add ringbuf memory type confusion test
bpf, selftests: Add various ringbuf tests with invalid offset
bpf: Fix ringbuf memory type confusion when passing to helpers
bpf: Fix out of bounds access for ringbuf helpers
bpf: Generally fix helper register offset check
bpf: Mark PTR_TO_FUNC register initially with zero offset
bpf: Generalize check_ctx_reg for reuse with other types
bpf: Fix incorrect integer literal used for marking scratched stack.
bpf/selftests: Add check for updating XDP bpf_link with wrong program type
bpf/selftests: convert xdp_link test to ASSERT_* macros
xdp: check prog type before updating BPF link
bpf: Fix mount source show for bpffs
====================
Link: https://lore.kernel.org/r/20220119011825.9082-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add two tests, one which asserts that ring buffer memory can be passed to
other helpers for populating its entry area, and another one where verifier
rejects different type of memory passed to bpf_ringbuf_submit().
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Assert that the verifier is rejecting invalid offsets on the ringbuf entries:
# ./test_verifier | grep ring
#947/u ringbuf: invalid reservation offset 1 OK
#947/p ringbuf: invalid reservation offset 1 OK
#948/u ringbuf: invalid reservation offset 2 OK
#948/p ringbuf: invalid reservation offset 2 OK
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
When the target is a pid, not started by 'perf stat' we need to disable
the events, and in that case there is no need to setup affinities as we
use a dummy CPU map, with just one entry set to -1.
So stop doing it to avoid this needless call to sched_getaffinity():
# strace -ke sched_getaffinity perf stat -e cycles -p 241957 sleep 1
<SNIP>
sched_getaffinity(0, 512, [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]) = 8
> /usr/lib64/libc-2.33.so(sched_getaffinity@@GLIBC_2.3.4+0x1a) [0xe6eea]
> /var/home/acme/bin/perf(affinity__setup+0x6a) [0x532a2a]
> /var/home/acme/bin/perf(__evlist__disable.constprop.0+0x27) [0x4b9827]
> /var/home/acme/bin/perf(cmd_stat+0x29b5) [0x431725]
> /var/home/acme/bin/perf(run_builtin+0x6a) [0x4a2cfa]
> /var/home/acme/bin/perf(main+0x612) [0x40f8c2]
> /usr/lib64/libc-2.33.so(__libc_start_main+0xd4) [0x27b74]
> /var/home/acme/bin/perf(_start+0x2d) [0x40fadd]
<SNIP>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20220117160931.1191712-5-acme@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When the target is a pid, not started by 'perf stat' we need to enable
the events, and in that case there is no need to setup affinities as we
use a dummy CPU map, with just one entry set to -1.
So stop doing it to avoid this needless call to sched_getaffinity():
# strace -ke sched_getaffinity perf stat -e cycles -p 241957 sleep 1
<SNIP>
sched_getaffinity(0, 512, [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]) = 8
> /usr/lib64/libc-2.33.so(sched_getaffinity@@GLIBC_2.3.4+0x1a) [0xe6eea]
> /var/home/acme/bin/perf(affinity__setup+0x6a) [0x5329ca]
> /var/home/acme/bin/perf(__evlist__enable.constprop.0+0x23) [0x4b9693]
> /var/home/acme/bin/perf(enable_counters+0x14d) [0x42de5d]
> /var/home/acme/bin/perf(cmd_stat+0x2358) [0x4310c8]
> /var/home/acme/bin/perf(run_builtin+0x6a) [0x4a2cfa]
> /var/home/acme/bin/perf(main+0x612) [0x40f8c2]
> /usr/lib64/libc-2.33.so(__libc_start_main+0xd4) [0x27b74]
> /var/home/acme/bin/perf(_start+0x2d) [0x40fadd]
<SNIP>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20220117160931.1191712-4-acme@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
I.e. the simple:
$ perf stat sleep 1
Uses a dummy CPU map and thus there is no need to setup/cleanup
affinities to avoid IPIs, etc.
With this we're down to a sched_getaffinity() call, in the libnuma
initialization, that probably can be removed in a followup patch.
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20220117160931.1191712-3-acme@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Just like with free(), NULL is checked to avoid having all callers do
it.
Its convenient for when not using affinity setup/cleanup for dummy CPU
maps, i.e. CPU maps for pid targets.
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20220117160931.1191712-2-acme@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Because of commit bf794bf52a ("powerpc/kprobes: Fix kallsyms
lookup across powerpc ABIv1 and ABIv2"), in ppc64 ABIv1, our perf
command eliminates the need to use the prefix "." at the symbol name.
But when the command "perf probe -a schedule" is executed on ppc64
ABIv1, it obtains two symbol address information through /proc/kallsyms,
for example:
cat /proc/kallsyms | grep -w schedule
c000000000657020 T .schedule
c000000000d4fdb8 D schedule
The symbol "D schedule" is not a function symbol, and perf will print:
"p:probe/schedule _text+13958584"Failed to write event: Invalid argument
Therefore, when searching symbols from map and adding probe point for
them, a symbol type check is added. If the type of symbol is not a
function, skip it.
Fixes: bf794bf52a ("powerpc/kprobes: Fix kallsyms lookup across powerpc ABIv1 and ABIv2")
Signed-off-by: Zechuan Chen <chenzechuan1@huawei.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jianlin Lv <Jianlin.Lv@arm.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Link: https://lore.kernel.org/r/20211228111338.218602-1-chenzechuan1@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
