Not all platforms have all of the four wakeup interrupts currently
described by the bindings.
Specifically, MSM8953/6/8 and SDM660 do not use the DP/DM interrupts,
while the SS PHY interrupt is optional on SDM660 and SC7280.
Note that no devicetree in mainline specify any wakeup interrupts for
- qcom,ipq4019-dwc3
- qcom,ipq6018-dwc3
- qcom,ipq8064-dwc3
- qcom,ipq8074-dwc3
- qcom,msm8994-dwc3
- qcom,qcs404-dwc3
but let's keep the schema warnings about that for now.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20220713131340.29401-3-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add SC8280XP to the DT schema.
Note that the SC8280XP controllers use the common set of five clocks and
an additional set of four interconnect clocks whose purpose is not
entirely clear at this point.
The set of wakeup interrupts is also different for SC8280XP.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20220713131340.29401-2-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit ebc4969ae1. That
commit was supposed to make the binding better reflect the MediaTek XHCI
hardware block by requiring all clocks to be present. But doing that
also causes too much noise in the devicetrees, since it requires
updating old MediaTek DTs to add clock handles for the fixed clocks, and
going forward every new clock added to the binding would require even
more updates.
The commit also didn't update the example to match the changes, causing
additional warnings.
Instead let's keep the clocks optional so that old devicetrees can keep
omitting the fixed clocks, and we'll just add the clocks as required on
new DTs.
Fixes: ebc4969ae1 ("dt-bindings: usb: mtk-xhci: Make all clocks required")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20220708192605.43351-1-nfraprado@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It allows to reset prevent_medium_removal flag and "eject" the image.
This can be useful to free the drive from a hunging host or if the host
continues to use the drive even after unmounting (Linux does this).
It's also a bit like using an unfolded paperclip on an optical drive.
Previously, the undocumented method of sending SIGUSR1 to a special
"file-storage" kernel thread could be used for these purposes,
but when using multiple storages there was no way to distinguish
one from the other, so we had to send a signal to everyone.
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Maxim Devaev <mdevaev@gmail.com>
Link: https://lore.kernel.org/r/20220711102956.19642-1-mdevaev@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The main issue this driver addresses is that a USB hub needs to be
powered before it can be discovered. For discrete onboard hubs (an
example for such a hub is the Realtek RTS5411) this is often solved
by supplying the hub with an 'always-on' regulator, which is kind
of a hack. Some onboard hubs may require further initialization
steps, like changing the state of a GPIO or enabling a clock, which
requires even more hacks. This driver creates a platform device
representing the hub which performs the necessary initialization.
Currently it only supports switching on a single regulator, support
for multiple regulators or other actions can be added as needed.
Different initialization sequences can be supported based on the
compatible string.
Besides performing the initialization the driver can be configured
to power the hub off during system suspend. This can help to extend
battery life on battery powered devices which have no requirements
to keep the hub powered during suspend. The driver can also be
configured to leave the hub powered when a wakeup capable USB device
is connected when suspending, and power it off otherwise.
Technically the driver consists of two drivers, the platform driver
described above and a very thin USB driver that subclasses the
generic driver. The purpose of this driver is to provide the platform
driver with the USB devices corresponding to the hub(s) (a hub
controller may provide multiple 'logical' hubs, e.g. one to support
USB 2.0 and another for USB 3.x).
Co-developed-by: Ravi Chandra Sadineni <ravisadineni@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Ravi Chandra Sadineni <ravisadineni@chromium.org>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/20220630123445.v24.3.I7c9a1f1d6ced41dd8310e8a03da666a32364e790@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the context of USB the term 'companion-hub' is misleading, change the
name of the property to 'peer-hub'.
There are no upstream users of the 'companion-hub' property, neither in
the device tree, nor on the driver side, so renaming it shouldn't cause
any compatibility issues with existing device trees.
Changes in v24:
- patch added to the series
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/20220630123445.v24.2.Ie2bbbd3f690826404b8f1059d24edcab33ed898f@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The USB device controller available in the Microchip LAN9662 SOC
is the same IP as the one present in the SAMA5D3 SOC.
Add the LAN9662 compatible string and set the SAMA5D3 compatible
string as a fallback for the LAN9662.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220701070928.459135-3-herve.codina@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
All of the clocks listed in the binding are always wired to the XHCI
controller hardware blocks on all SoCs. The reason some clocks were made
optional in the binding was to account for the fact that depending on
the SoC, some of the clocks might be fixed (ie not controlled by
software).
Given that the devicetree should represent the hardware, make all clocks
required in the binding. Subsequent patches will make the DTS changes to
specify fixed-clocks for the clocks that aren't controllable.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20220623193702.817996-3-nfraprado@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add missing "minItems: 1" to the interrupt-names property to allow the
second interrupt-names, "wakeup", to be optional.
Fixes: fe8e488058 ("dt-bindings: usb: mtk-xhci: add wakeup interrupt")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/20220623193702.817996-2-nfraprado@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iQFRBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmK4zgIeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGrI8H+MeIYPff1m9vh1rZ
u1eCCtw/A+NqJ5l0Cq3Zj090crMb8zVkxr5QrdPxxJuxAK8AI/XzOUQivnNayp6v
bvWcbj9e95ZoIQjbPakozo3KYnaHXMFfrq6JNdGIBJ5yt5pVHtJ3iZk25wUZEghD
8lxoz4Uiuo14ZbLnlLjbXr5OEVupOH1OoQPghkSoolD8JBe1coOIYbzzJ69HBwNg
kCUyD0CsFCBpy0P7yBnPNrvQGOt+NVz9FLfEbYFj+ydQjzw3NNw7tyKTahqp7ScN
BS5Ftt0kuHqOyWDO9OP6dG1kGmvIWQZkrEroz1TS4FfgrrPRr5r0N9+tGvr9+tpZ
1tjaBA==
=L7lN
-----END PGP SIGNATURE-----
Merge 5.19-rc4 into usb-next
We need the USB fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes for post-5.18 changes:
- fix for a damon boot hang, from SeongJae
- fix for a kfence warning splat, from Jason Donenfeld
- fix for zero-pfn pinning, from Alex Williamson
- fix for fallocate hole punch clearing, from Mike Kravetz
Fixes pre-5.18 material:
- fix for a performance regression, from Marcelo
- fix for a hwpoisining BUG from zhenwei pi
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCYri4RgAKCRDdBJ7gKXxA
jmhsAQDCvGqtIUhgkTwid8KBRNbowsg0LXd6k+gUjcxBhH403wEA0r0cxxkDAmgr
QNXn/qZRzQP2ji+pdjH9NBOsd2g2XQA=
=UGJ7
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2022-06-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull hotfixes from Andrew Morton:
"Minor things, mainly - mailmap updates, MAINTAINERS updates, etc.
Fixes for this merge window:
- fix for a damon boot hang, from SeongJae
- fix for a kfence warning splat, from Jason Donenfeld
- fix for zero-pfn pinning, from Alex Williamson
- fix for fallocate hole punch clearing, from Mike Kravetz
Fixes for previous releases:
- fix for a performance regression, from Marcelo
- fix for a hwpoisining BUG from zhenwei pi"
* tag 'mm-hotfixes-stable-2022-06-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mailmap: add entry for Christian Marangi
mm/memory-failure: disable unpoison once hw error happens
hugetlbfs: zero partial pages during fallocate hole punch
mm: memcontrol: reference to tools/cgroup/memcg_slabinfo.py
mm: re-allow pinning of zero pfns
mm/kfence: select random number before taking raw lock
MAINTAINERS: add maillist information for LoongArch
MAINTAINERS: update MM tree references
MAINTAINERS: update Abel Vesa's email
MAINTAINERS: add MEMORY HOT(UN)PLUG section and add David as reviewer
MAINTAINERS: add Miaohe Lin as a memory-failure reviewer
mailmap: add alias for jarkko@profian.com
mm/damon/reclaim: schedule 'damon_reclaim_timer' only after 'system_wq' is initialized
kthread: make it clear that kthread_create_on_node() might be terminated by any fatal signal
mm: lru_cache_disable: use synchronize_rcu_expedited
mm/page_isolation.c: fix one kernel-doc comment
-----BEGIN PGP SIGNATURE-----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=rUrf
-----END PGP SIGNATURE-----
Merge tag 'for-5.19-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- zoned relocation fixes:
- fix critical section end for extent writeback, this could lead
to out of order write
- prevent writing to previous data relocation block group if space
gets low
- reflink fixes:
- fix race between reflinking and ordered extent completion
- proper error handling when block reserve migration fails
- add missing inode iversion/mtime/ctime updates on each iteration
when replacing extents
- fix deadlock when running fsync/fiemap/commit at the same time
- fix false-positive KCSAN report regarding pid tracking for read locks
and data race
- minor documentation update and link to new site
* tag 'for-5.19-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
Documentation: update btrfs list of features and link to readthedocs.io
btrfs: fix deadlock with fsync+fiemap+transaction commit
btrfs: don't set lock_owner when locking extent buffer for reading
btrfs: zoned: fix critical section of relocation inode writeback
btrfs: zoned: prevent allocation from previous data relocation BG
btrfs: do not BUG_ON() on failure to migrate space when replacing extents
btrfs: add missing inode updates on each iteration when replacing extents
btrfs: fix race between reflinking and ordered extent completion
- Fix modpost to detect EXPORT_SYMBOL marked as __init or__exit
- Update the supported arch list in the LLVM document
- Avoid the second link of vmlinux for CONFIG_TRIM_UNUSED_KSYMS
- Avoid false __KSYM___this_module define in include/generated/autoksyms.h
-----BEGIN PGP SIGNATURE-----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=PnXQ
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix modpost to detect EXPORT_SYMBOL marked as __init or__exit
- Update the supported arch list in the LLVM document
- Avoid the second link of vmlinux for CONFIG_TRIM_UNUSED_KSYMS
- Avoid false __KSYM___this_module define in include/generated/autoksyms.h
* tag 'kbuild-fixes-v5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: Ignore __this_module in gen_autoksyms.sh
kbuild: link vmlinux only once for CONFIG_TRIM_UNUSED_KSYMS (2nd attempt)
Documentation/llvm: Update Supported Arch table
modpost: fix section mismatch check for exported init/exit sections
Here are a set of IIO driver fixes for 5.19-rc4. Jonathan said it best
in his pull request to me, so I'll just quote it here below, as that's
the only changes we have right now for the char-misc driver tree:
1st set of IIO fixes for the 5.19 cycle.
Most of these have been in next for a long time. Unfortunately there
was one stray patch in the branch (wasn't a fix), so I've just rebased
to remove that.
* testing
- Fix a missing MODULE_LICENSE() warning by restricting possible build
configs.
* Various drivers
- Fix ordering of iio_get_trigger() being called before
iio_trigger_register()
* adi,admv1014
- Fix dubious x & !y warning.
* adi,axi-adc
- Fix missing of_node_put() in error and normal paths.
* aspeed,adc
- Add missing of_node_put()
* fsl,mma8452
- Fix broken probing from device tree.
- Drop check on return value of i2c write to device to cause reset as
ACK will be missing (device reset before sending it).
* fsl,vf610
- Fix documentation of in_conversion_mode ABI.
* iio-trig-sysfs
- Ensure irq work has finished before freeing the trigger.
* invensense,mpu3050
- Disable regulators in error path.
* invensense,icm42600
- Fix collision of enum value of 0 with error path where 0 is no match.
* renesas,rzg2l_Adc
- Add missing fwnode_handle_put() in error path.
* rescale
- Fix a boolean logic bug for detection of raw + scale affecting an
obscure corner case.
* semtech,sx9324
- Check return value of read of pin_defs
* st,stm32-adc:
- Fix interaction across ADC instances for some supported devices.
- Drop false spurious IRQ messages.
- Fix calibration value handling. If we can't calibrate don't expose the
vref_int channel.
- Fix maximum clock rate for stm32pm15x
* ti,ads131e08
- Add missing fwnode_handle_put() in error paths.
* xilinx,ams
- Fix variable checked for error from platform_get_irq()
* x-powers,axp288
- Overide TS_PIN bias current for boards where it is not correctly
initialized.
* yamaha,yas530
- Fix inverted check on calibration data being all zeros.
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYrcekA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynZVgCfZUqV4hyGIWbDjupQHIu5FrAUdisAn0Aaa77q
AHJe7E9jq//3mZ/TRYMw
=pwsw
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull IIO driver fixes from Greg KH:
"Here are a set of IIO driver fixes for 5.19-rc4. Jonathan said it best
in his pull request to me, so I'll just quote it here below, as that's
the only changes we have right now for the char-misc driver tree:
testing:
- Fix a missing MODULE_LICENSE() warning by restricting possible
build configs.
Various drivers:
- Fix ordering of iio_get_trigger() being called before
iio_trigger_register()
adi,admv1014:
- Fix dubious x & !y warning.
adi,axi-adc:
- Fix missing of_node_put() in error and normal paths.
aspeed,adc:
- Add missing of_node_put()
fsl,mma8452:
- Fix broken probing from device tree.
- Drop check on return value of i2c write to device to cause reset
as ACK will be missing (device reset before sending it).
fsl,vf610:
- Fix documentation of in_conversion_mode ABI.
iio-trig-sysfs:
- Ensure irq work has finished before freeing the trigger.
invensense,mpu3050:
- Disable regulators in error path.
invensense,icm42600:
- Fix collision of enum value of 0 with error path where 0 is no
match.
renesas,rzg2l_Adc:
- Add missing fwnode_handle_put() in error path.
rescale:
- Fix a boolean logic bug for detection of raw + scale affecting
an obscure corner case.
semtech,sx9324:
- Check return value of read of pin_defs
st,stm32-adc:
- Fix interaction across ADC instances for some supported devices.
- Drop false spurious IRQ messages.
- Fix calibration value handling. If we can't calibrate don't
expose the vref_int channel.
- Fix maximum clock rate for stm32pm15x
ti,ads131e08:
- Add missing fwnode_handle_put() in error paths.
xilinx,ams:
- Fix variable checked for error from platform_get_irq()
x-powers,axp288:
- Overide TS_PIN bias current for boards where it is not correctly
initialized.
yamaha,yas530:
- Fix inverted check on calibration data being all zeros.
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (26 commits)
iio:proximity:sx9324: Check ret value of device_property_read_u32_array()
iio: accel: mma8452: ignore the return value of reset operation
iio: adc: stm32: fix maximum clock rate for stm32mp15x
iio: adc: stm32: fix vrefint wrong calibration value handling
iio: imu: inv_icm42600: Fix broken icm42600 (chip id 0 value)
iio: adc: vf610: fix conversion mode sysfs node name
iio: adc: adi-axi-adc: Fix refcount leak in adi_axi_adc_attach_client
iio: test: fix missing MODULE_LICENSE for IIO_RESCALE=m
iio:humidity:hts221: rearrange iio trigger get and register
iio:chemical:ccs811: rearrange iio trigger get and register
iio:accel:mxc4005: rearrange iio trigger get and register
iio:accel:kxcjk-1013: rearrange iio trigger get and register
iio:accel:bma180: rearrange iio trigger get and register
iio: afe: rescale: Fix boolean logic bug
iio: adc: aspeed: Fix refcount leak in aspeed_adc_set_trim_data
iio: adc: stm32: Fix IRQs on STM32F4 by removing custom spurious IRQs message
iio: adc: stm32: Fix ADCs iteration in irq handler
iio: adc: ti-ads131e08: add missing fwnode_handle_put() in ads131e08_alloc_channels()
iio: adc: rzg2l_adc: add missing fwnode_handle_put() in rzg2l_adc_parse_properties()
iio: trigger: sysfs: fix use-after-free on remove
...
Here are some small USB driver fixes and new device ids for 5.19-rc4 for
a few small reported issues. They include:
- new usb-serial driver ids
- MAINTAINERS file update to properly catch the USB dts files
- dt-bindings fixes for reported build warnings
- xhci driver fixes for reported problems
- typec Kconfig dependancy fix
- raw_gadget fuzzing fixes found by syzbot
- chipidea driver bugfix
- usb gadget uvc bugfix
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYrcd/Q8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yncSACgltyfiCy+kOL5NWis+JxE0Itn+/EAnRlfkm41
+NMH4Tz2FNgGR6FN4988
=hu3T
-----END PGP SIGNATURE-----
Merge tag 'usb-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB driver fixes from Greg KH:
"Here are some small USB driver fixes and new device ids for 5.19-rc4
for a few small reported issues. They include:
- new usb-serial driver ids
- MAINTAINERS file update to properly catch the USB dts files
- dt-bindings fixes for reported build warnings
- xhci driver fixes for reported problems
- typec Kconfig dependancy fix
- raw_gadget fuzzing fixes found by syzbot
- chipidea driver bugfix
- usb gadget uvc bugfix
All of these have been in linux-next with no reported issues"
* tag 'usb-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: chipidea: udc: check request status before setting device address
USB: gadget: Fix double-free bug in raw_gadget driver
xhci-pci: Allow host runtime PM as default for Intel Meteor Lake xHCI
xhci-pci: Allow host runtime PM as default for Intel Raptor Lake xHCI
xhci: turn off port power in shutdown
xhci: Keep interrupt disabled in initialization until host is running.
USB: serial: option: add Quectel RM500K module support
USB: serial: option: add Quectel EM05-G modem
USB: serial: pl2303: add support for more HXN (G) types
usb: typec: wcove: Drop wrong dependency to INTEL_SOC_PMIC
usb: gadget: uvc: fix list double add in uvcg_video_pump
dt-bindings: usb: ehci: Increase the number of PHYs
dt-bindings: usb: ohci: Increase the number of PHYs
usb: gadget: Fix non-unique driver names in raw-gadget driver
MAINTAINERS: add include/dt-bindings/usb to USB SUBSYSTEM
USB: serial: option: add Telit LE910Cx 0x1250 composition
- make the irqchip immutable in gpio-realtek-otto
- fix error code propagation in gpio-winbond
- fix device removing in gpio-grgpio
- fix a typo in gpio-mxs which indicates the driver is for a different model
- documentation fixes
- MAINTAINERS file updates
-----BEGIN PGP SIGNATURE-----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=0wLZ
-----END PGP SIGNATURE-----
Merge tag 'gpio-fixes-for-v5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- make the irqchip immutable in gpio-realtek-otto
- fix error code propagation in gpio-winbond
- fix device removing in gpio-grgpio
- fix a typo in gpio-mxs which indicates the driver is for a different
model
- documentation fixes
- MAINTAINERS file updates
* tag 'gpio-fixes-for-v5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: mxs: Fix header comment
gpio: Fix kernel-doc comments to nested union
gpio: grgpio: Fix device removing
gpio: winbond: Fix error code in winbond_gpio_get()
gpio: realtek-otto: Make the irqchip immutable
docs: driver-api: gpio: Fix filename mismatch
MAINTAINERS: add include/dt-bindings/gpio to GPIO SUBSYSTEM
A bunch of driver specific fixes, plus a fix for spi-mem's status
polling for devices that use GPIO chip selects and a DT bindings
examples fix that helps with the validation work.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmK160MACgkQJNaLcl1U
h9D9pQf+PDg9PFz++i9SVBvRGJn6YNXpgUXSPlN39KvSUgf4esc9oKJ53NVwA3g5
BdaTAhZIP6ZdvfBfy1J1NggwVA/1T8yvQZ4hafqJaAyqydO4OvtF0lN9xe++Y0e6
VVYZ1Y63F21hstxVjBwrdsUoNb/pBr2ltz02W6DkrLsa7LtWESSzblVJ0lvDP2lU
61ycBHgM6kyxVpgJCWB63VnK1RyLFTVBo9DZM0W4RuRQ3NYEfg5mfDy5xhGlIodV
k0gIZ6UlxuumEuiuGgeoW2sy4zWfsnEQvyk7KUiknYur25sZTfPImznCr8MC53j3
gGeKaY3vuHnRSfPsOoQfc7pWnjmjQQ==
=m1g1
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A bunch of driver specific fixes, plus a fix for spi-mem's status
polling for devices that use GPIO chip selects and a DT bindings
examples fix that helps with the validation work"
* tag 'spi-fix-v5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: rockchip: Unmask IRQ at the final to avoid preemption
spi: dt-bindings: Fix unevaluatedProperties warnings in examples
spi: spi-mem: Fix spi_mem_poll_status()
spi: cadence: Detect transmit FIFO depth
spi: spi-cadence: Fix SPI CS gets toggling sporadically
The target peripheral list (TPL) is used to identify targeted devices
during Embedded Host compliance testing. The user can add "tpl-support"
in the device tree to enable it.
Document TPL support as described in usb-hcd.yaml.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20220621152350.145745-4-fabrice.gasnier@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Added support for wakeup-source property. This property can be
used to check and power down the phy during system suspend if
wake up is not supported.
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sandeep Maheswaram <quic_c_sanm@quicinc.com>
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Link: https://lore.kernel.org/r/1655094654-24052-2-git-send-email-quic_kriskura@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
"make dtbs_check":
arch/arm/boot/dts/r8a77470-iwg23s-sbc.dtb: usb@ee080100: phys: [[17, 0], [31]] is too long
From schema: Documentation/devicetree/bindings/usb/generic-ehci.yaml
arch/arm/boot/dts/r8a77470-iwg23s-sbc.dtb: usb@ee0c0100: phys: [[17, 1], [33], [21, 0]] is too long
From schema: Documentation/devicetree/bindings/usb/generic-ehci.yaml
Some USB EHCI controllers (e.g. on the Renesas RZ/G1C SoC) have multiple
PHYs. Increase the maximum number of PHYs to 3, which is sufficient for
now.
Fixes: 0499220d6d ("dt-bindings: Add missing array size constraints")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/c5d19e2f9714f43effd90208798fc1936098078f.1655301043.git.geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
"make dtbs_check":
arch/arm/boot/dts/r8a77470-iwg23s-sbc.dtb: usb@ee080000: phys: [[17, 0], [31]] is too long
From schema: Documentation/devicetree/bindings/usb/generic-ohci.yaml
arch/arm/boot/dts/r8a77470-iwg23s-sbc.dtb: usb@ee0c0000: phys: [[17, 1], [33], [21, 0]] is too long
From schema: Documentation/devicetree/bindings/usb/generic-ohci.yaml
Some USB OHCI controllers (e.g. on the Renesas RZ/G1C SoC) have multiple
PHYs. Increase the maximum number of PHYs to 3, which is sufficient for
now.
Fixes: 0499220d6d ("dt-bindings: Add missing array size constraints")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/0112f9c8881513cb33bf7b66bc743dd08b35a2f5.1655301203.git.geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The btrfs documentation in kernel is only meant as a starting point, so
update the list of features and add link to btrfs.readthedocs.io page
that is most up-to-date. The wiki is still used but information is
migrated from there.
Signed-off-by: David Sterba <dsterba@suse.com>
Most of these have been in next for a long time. Unfortunately there
was one stray patch in the branch (wasn't a fix), so I've just rebased
to remove that.
* testing
- Fix a missing MODULE_LICENSE() warning by restricting possible build
configs.
* Various drivers
- Fix ordering of iio_get_trigger() being called before
iio_trigger_register()
* adi,admv1014
- Fix dubious x & !y warning.
* adi,axi-adc
- Fix missing of_node_put() in error and normal paths.
* aspeed,adc
- Add missing of_node_put()
* fsl,mma8452
- Fix broken probing from device tree.
- Drop check on return value of i2c write to device to cause reset as
ACK will be missing (device reset before sending it).
* fsl,vf610
- Fix documentation of in_conversion_mode ABI.
* iio-trig-sysfs
- Ensure irq work has finished before freeing the trigger.
* invensense,mpu3050
- Disable regulators in error path.
* invensense,icm42600
- Fix collision of enum value of 0 with error path where 0 is no match.
* renesas,rzg2l_Adc
- Add missing fwnode_handle_put() in error path.
* rescale
- Fix a boolean logic bug for detection of raw + scale affecting an
obscure corner case.
* semtech,sx9324
- Check return value of read of pin_defs
* st,stm32-adc:
- Fix interaction across ADC instances for some supported devices.
- Drop false spurious IRQ messages.
- Fix calibration value handling. If we can't calibrate don't expose the
vref_int channel.
- Fix maximum clock rate for stm32pm15x
* ti,ads131e08
- Add missing fwnode_handle_put() in error paths.
* xilinx,ams
- Fix variable checked for error from platform_get_irq()
* x-powers,axp288
- Overide TS_PIN bias current for boards where it is not correctly
initialized.
* yamaha,yas530
- Fix inverted check on calibration data being all zeros.
-----BEGIN PGP SIGNATURE-----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=AtPS
-----END PGP SIGNATURE-----
Merge tag 'iio-fixes-for-5.19a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
1st set of IIO fixes for the 5.19 cycle.
Most of these have been in next for a long time. Unfortunately there
was one stray patch in the branch (wasn't a fix), so I've just rebased
to remove that.
* testing
- Fix a missing MODULE_LICENSE() warning by restricting possible build
configs.
* Various drivers
- Fix ordering of iio_get_trigger() being called before
iio_trigger_register()
* adi,admv1014
- Fix dubious x & !y warning.
* adi,axi-adc
- Fix missing of_node_put() in error and normal paths.
* aspeed,adc
- Add missing of_node_put()
* fsl,mma8452
- Fix broken probing from device tree.
- Drop check on return value of i2c write to device to cause reset as
ACK will be missing (device reset before sending it).
* fsl,vf610
- Fix documentation of in_conversion_mode ABI.
* iio-trig-sysfs
- Ensure irq work has finished before freeing the trigger.
* invensense,mpu3050
- Disable regulators in error path.
* invensense,icm42600
- Fix collision of enum value of 0 with error path where 0 is no match.
* renesas,rzg2l_Adc
- Add missing fwnode_handle_put() in error path.
* rescale
- Fix a boolean logic bug for detection of raw + scale affecting an
obscure corner case.
* semtech,sx9324
- Check return value of read of pin_defs
* st,stm32-adc:
- Fix interaction across ADC instances for some supported devices.
- Drop false spurious IRQ messages.
- Fix calibration value handling. If we can't calibrate don't expose the
vref_int channel.
- Fix maximum clock rate for stm32pm15x
* ti,ads131e08
- Add missing fwnode_handle_put() in error paths.
* xilinx,ams
- Fix variable checked for error from platform_get_irq()
* x-powers,axp288
- Overide TS_PIN bias current for boards where it is not correctly
initialized.
* yamaha,yas530
- Fix inverted check on calibration data being all zeros.
* tag 'iio-fixes-for-5.19a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (26 commits)
iio:proximity:sx9324: Check ret value of device_property_read_u32_array()
iio: accel: mma8452: ignore the return value of reset operation
iio: adc: stm32: fix maximum clock rate for stm32mp15x
iio: adc: stm32: fix vrefint wrong calibration value handling
iio: imu: inv_icm42600: Fix broken icm42600 (chip id 0 value)
iio: adc: vf610: fix conversion mode sysfs node name
iio: adc: adi-axi-adc: Fix refcount leak in adi_axi_adc_attach_client
iio: test: fix missing MODULE_LICENSE for IIO_RESCALE=m
iio:humidity:hts221: rearrange iio trigger get and register
iio:chemical:ccs811: rearrange iio trigger get and register
iio:accel:mxc4005: rearrange iio trigger get and register
iio:accel:kxcjk-1013: rearrange iio trigger get and register
iio:accel:bma180: rearrange iio trigger get and register
iio: afe: rescale: Fix boolean logic bug
iio: adc: aspeed: Fix refcount leak in aspeed_adc_set_trim_data
iio: adc: stm32: Fix IRQs on STM32F4 by removing custom spurious IRQs message
iio: adc: stm32: Fix ADCs iteration in irq handler
iio: adc: ti-ads131e08: add missing fwnode_handle_put() in ads131e08_alloc_channels()
iio: adc: rzg2l_adc: add missing fwnode_handle_put() in rzg2l_adc_parse_properties()
iio: trigger: sysfs: fix use-after-free on remove
...
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmKvgdceHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG0qMH/RnVz4BvYXVWWc1t
+4NT9N20pNzrByzUxSBsrLfL5BNIt9fNjrS0WLs4HlzExbiixvKIBHPkDZoCo1gQ
wxoqpJf2BMxmdXH46/wWdSszbdPk33eLM/MfYE2QfnmtYsDSLZQMzOUAcdh6qD53
ty9br3IM/g4ixCwxKRt3NNixjin4wTTxR5ZD2E5k0JAaT+4FW5llRvq92dA1UOq7
JeGRLkc2l0211MFLo0vtuPOyWMIQL8t98rKTzevwoVY7R9I/0uUJCbkU7mb9wMUY
yKYlTN/4ZikTTSxa8NpQsXHqTyOHaKmS5F6oE4sw9VurHI2u3Jmxy9j9AwO1Pn8C
JUizMCk=
=qqcu
-----END PGP SIGNATURE-----
Merge v5.19-rc3 into usb-next
We need the USB fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While watching Michael's new talk on Clang-built-Linux, I noticed the
arch table in our docs that he refers to is outdated.
Add hexagon and User Mode. Bump MIPS and RISCV to LLVM=1. PowerPC is
almost LLVM=1 capable; ppc64le works, but ppc64 (big endian) and ppc32
still need more work.
Link: https://youtu.be/W4zdEDpvR5c?t=399
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
or error injection. Also fix up how test_dummy_encryption mount
option is handled for the new mount API. Finally, fix/cleanup a
number of comments and ext4 Documentation files.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmKuYpcACgkQ8vlZVpUN
gaMXwwf8DSHJ3gI2Lo0wrzJm7KSS0C+HK29/rtLCZdxECQsZR156ZzSF3zAFKOwK
Yx3RJwiFxrciUUytY/MWTyalCk+M8oW1093SfRqNNZCbZNi33acnbTqioa7INnDw
snFGGEU1y0M0AUduxNWPr71P80sTyQa0ZplIc4YeR98zzMvoWgi1dvo4wNdtJNQb
Gb0FtBhgP+IeK50eBlK4O0Eg5kqd0V5OeTLUYUfsWqU28ap8dHYE48I6sIdHx6az
sa6b2+YRuBxJUV61FNujuVtkDgUHXtXM97kkGpywRSLjo4iFxlQvX9Ew4lBD9RDI
b0YHVzK/DU9M3VfiYgzGwShCb/M68w==
=NtNY
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Fix a variety of bugs, many of which were found by folks using fuzzing
or error injection.
Also fix up how test_dummy_encryption mount option is handled for the
new mount API.
Finally, fix/cleanup a number of comments and ext4 Documentation
files"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix a doubled word "need" in a comment
ext4: add reserved GDT blocks check
ext4: make variable "count" signed
ext4: correct the judgment of BUG in ext4_mb_normalize_request
ext4: fix bug_on ext4_mb_use_inode_pa
ext4: fix up test_dummy_encryption handling for new mount API
ext4: use kmemdup() to replace kmalloc + memcpy
ext4: fix super block checksum incorrect after mount
ext4: improve write performance with disabled delalloc
ext4: fix warning when submitting superblock in ext4_commit_super()
ext4, doc: remove unnecessary escaping
ext4: fix incorrect comment in ext4_bio_write_page()
fs: fix jbd2_journal_try_to_free_buffers() kernel-doc comment
* Add missing lock protection in occ driver
* Add missing comma in board name list in asus-ec-sensors driver
* Fix devicetree bindings for ti,tmp401
-----BEGIN PGP SIGNATURE-----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=0ZUU
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-v5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- Add missing lock protection in occ driver
- Add missing comma in board name list in asus-ec-sensors driver
- Fix devicetree bindings for ti,tmp401
* tag 'hwmon-for-v5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (asus-ec-sensors) add missing comma in board name list.
hwmon: (occ) Lock mutex in shutdown to prevent race with occ_active
dt-bindings: hwmon: ti,tmp401: Drop 'items' from 'ti,n-factor' property
Current release - regressions:
- Revert "net: Add a second bind table hashed by port and address",
needs more work
- amd-xgbe: use platform_irq_count(), static setup of IRQ resources
had been removed from DT core
- dts: at91: ksz9477_evb: add phy-mode to fix port/phy validation
Current release - new code bugs:
- hns3: modify the ring param print info
Previous releases - always broken:
- axienet: make the 64b addressable DMA depends on 64b architectures
- iavf: fix issue with MAC address of VF shown as zero
- ice: fix PTP TX timestamp offset calculation
- usb: ax88179_178a needs FLAG_SEND_ZLP
Misc:
- document some net.sctp.* sysctls
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=JSV9
-----END PGP SIGNATURE-----
Merge tag 'net-5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Mostly driver fixes.
Current release - regressions:
- Revert "net: Add a second bind table hashed by port and address",
needs more work
- amd-xgbe: use platform_irq_count(), static setup of IRQ resources
had been removed from DT core
- dts: at91: ksz9477_evb: add phy-mode to fix port/phy validation
Current release - new code bugs:
- hns3: modify the ring param print info
Previous releases - always broken:
- axienet: make the 64b addressable DMA depends on 64b architectures
- iavf: fix issue with MAC address of VF shown as zero
- ice: fix PTP TX timestamp offset calculation
- usb: ax88179_178a needs FLAG_SEND_ZLP
Misc:
- document some net.sctp.* sysctls"
* tag 'net-5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (31 commits)
net: axienet: add missing error return code in axienet_probe()
Revert "net: Add a second bind table hashed by port and address"
net: ax25: Fix deadlock caused by skb_recv_datagram in ax25_recvmsg
net: usb: ax88179_178a needs FLAG_SEND_ZLP
MAINTAINERS: add include/dt-bindings/net to NETWORKING DRIVERS
ARM: dts: at91: ksz9477_evb: fix port/phy validation
net: bgmac: Fix an erroneous kfree() in bgmac_remove()
ice: Fix memory corruption in VF driver
ice: Fix queue config fail handling
ice: Sync VLAN filtering features for DVM
ice: Fix PTP TX timestamp offset calculation
mlxsw: spectrum_cnt: Reorder counter pools
docs: networking: phy: Fix a typo
amd-xgbe: Use platform_irq_count()
octeontx2-vf: Add support for adaptive interrupt coalescing
xilinx: Fix build on x86.
net: axienet: Use iowrite64 to write all 64b descriptor pointers
net: axienet: make the 64b addresable DMA depends on 64b archectures
net: hns3: fix tm port shapping of fibre port is incorrect after driver initialization
net: hns3: fix PF rss size initialization bug
...
* Properly reset the SVE/SME flags on vcpu load
* Fix a vgic-v2 regression regarding accessing the pending
state of a HW interrupt from userspace (and make the code
common with vgic-v3)
* Fix access to the idreg range for protected guests
* Ignore 'kvm-arm.mode=protected' when using VHE
* Return an error from kvm_arch_init_vm() on allocation failure
* A bunch of small cleanups (comments, annotations, indentation)
RISC-V:
* Typo fix in arch/riscv/kvm/vmid.c
* Remove broken reference pattern from MAINTAINERS entry
x86-64:
* Fix error in page tables with MKTME enabled
* Dirty page tracking performance test extended to running a nested
guest
* Disable APICv/AVIC in cases that it cannot implement correctly
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmKjTIAUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNhPQgAiIVtp8aepujUM/NhkNyK3SIdLzlS
oZCZiS6bvaecKXi/QvhBU0EBxAEyrovk3lmVuYNd41xI+PDjyaA4SDIl5DnToGUw
bVPNFSYqjpF939vUUKjc0RCdZR4o5g3Od3tvWoHTHviS1a8aAe5o9pcpHpD0D6Mp
Gc/o58nKAOPl3htcFKmjymqo3Y6yvkJU9NB7DCbL8T5mp5pJ959Mw1/LlmBaAzJC
OofrynUm4NjMyAj/mAB1FhHKFyQfjBXLhiVlS0SLiiEA/tn9/OXyVFMKG+n5VkAZ
Q337GMFe2RikEIuMEr3Rc4qbZK3PpxHhaj+6MPRuM0ho/P4yzl2Nyb/OhA==
=h81Q
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"While last week's pull request contained miscellaneous fixes for x86,
this one covers other architectures, selftests changes, and a bigger
series for APIC virtualization bugs that were discovered during 5.20
development. The idea is to base 5.20 development for KVM on top of
this tag.
ARM64:
- Properly reset the SVE/SME flags on vcpu load
- Fix a vgic-v2 regression regarding accessing the pending state of a
HW interrupt from userspace (and make the code common with vgic-v3)
- Fix access to the idreg range for protected guests
- Ignore 'kvm-arm.mode=protected' when using VHE
- Return an error from kvm_arch_init_vm() on allocation failure
- A bunch of small cleanups (comments, annotations, indentation)
RISC-V:
- Typo fix in arch/riscv/kvm/vmid.c
- Remove broken reference pattern from MAINTAINERS entry
x86-64:
- Fix error in page tables with MKTME enabled
- Dirty page tracking performance test extended to running a nested
guest
- Disable APICv/AVIC in cases that it cannot implement correctly"
[ This merge also fixes a misplaced end parenthesis bug introduced in
commit 3743c2f025 ("KVM: x86: inhibit APICv/AVIC on changes to APIC
ID or APIC base") pointed out by Sean Christopherson ]
Link: https://lore.kernel.org/all/20220610191813.371682-1-seanjc@google.com/
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (34 commits)
KVM: selftests: Restrict test region to 48-bit physical addresses when using nested
KVM: selftests: Add option to run dirty_log_perf_test vCPUs in L2
KVM: selftests: Clean up LIBKVM files in Makefile
KVM: selftests: Link selftests directly with lib object files
KVM: selftests: Drop unnecessary rule for STATIC_LIBS
KVM: selftests: Add a helper to check EPT/VPID capabilities
KVM: selftests: Move VMX_EPT_VPID_CAP_AD_BITS to vmx.h
KVM: selftests: Refactor nested_map() to specify target level
KVM: selftests: Drop stale function parameter comment for nested_map()
KVM: selftests: Add option to create 2M and 1G EPT mappings
KVM: selftests: Replace x86_page_size with PG_LEVEL_XX
KVM: x86: SVM: fix nested PAUSE filtering when L0 intercepts PAUSE
KVM: x86: SVM: drop preempt-safe wrappers for avic_vcpu_load/put
KVM: x86: disable preemption around the call to kvm_arch_vcpu_{un|}blocking
KVM: x86: disable preemption while updating apicv inhibition
KVM: x86: SVM: fix avic_kick_target_vcpus_fast
KVM: x86: SVM: remove avic's broken code that updated APIC ID
KVM: x86: inhibit APICv/AVIC on changes to APIC ID or APIC base
KVM: x86: document AVIC/APICv inhibit reasons
KVM: x86/mmu: Set memory encryption "value", not "mask", in shadow PDPTRs
...
Stale Data.
They are a class of MMIO-related weaknesses which can expose stale data
by propagating it into core fill buffers. Data which can then be leaked
using the usual speculative execution methods.
Mitigations include this set along with microcode updates and are
similar to MDS and TAA vulnerabilities: VERW now clears those buffers
too.
-----BEGIN PGP SIGNATURE-----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=LBxT
-----END PGP SIGNATURE-----
Merge tag 'x86-bugs-2022-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 MMIO stale data fixes from Thomas Gleixner:
"Yet another hw vulnerability with a software mitigation: Processor
MMIO Stale Data.
They are a class of MMIO-related weaknesses which can expose stale
data by propagating it into core fill buffers. Data which can then be
leaked using the usual speculative execution methods.
Mitigations include this set along with microcode updates and are
similar to MDS and TAA vulnerabilities: VERW now clears those buffers
too"
* tag 'x86-bugs-2022-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/speculation/mmio: Print SMT warning
KVM: x86/speculation: Disable Fill buffer clear within guests
x86/speculation/mmio: Reuse SRBDS mitigation for SBDS
x86/speculation/srbds: Update SRBDS mitigation selection
x86/speculation/mmio: Add sysfs reporting for Processor MMIO Stale Data
x86/speculation/mmio: Enable CPU Fill buffer clearing on idle
x86/bugs: Group MDS, TAA & Processor MMIO Stale Data mitigations
x86/speculation/mmio: Add mitigation for Processor MMIO Stale Data
x86/speculation: Add a common function for MD_CLEAR mitigation update
x86/speculation/mmio: Enumerate Processor MMIO Stale Data bug
Documentation: Add documentation for Processor MMIO Stale Data
The filenames were changed a while ago, but board.rst, consumer.rst and
intro.rst still refer to the old names. Fix those references to match the
Actual names and avoid possible confusion.
Signed-off-by: Tom Schwindl <schwindl@posteo.de>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
- Make the *.mod build rule portable for POSIX awk
- Fix regression of 'make nsdeps'
- Make scripts/check-local-export working for older bash versions
- Fix scripts/gdb to extract the .config data from vmlinux
-----BEGIN PGP SIGNATURE-----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=ka85
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Make the *.mod build rule portable for POSIX awk
- Fix regression of 'make nsdeps'
- Make scripts/check-local-export working for older bash versions
- Fix scripts/gdb to extract the .config data from vmlinux
* tag 'kbuild-fixes-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
scripts/gdb: change kernel config dumping method
scripts/check-local-export: avoid 'wait $!' for process substitution
scripts/nsdeps: adjust to the format change of *.mod files
kbuild: avoid regex RS for POSIX awk
Add device tree binding documentation for the Aspeed USB2.0 Device
Controller.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neal Liu <neal_liu@aspeedtech.com>
Link: https://lore.kernel.org/r/20220523030134.2977116-4-neal_liu@aspeedtech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
All the USB Type-C Connector Class devices are protected, so
the drivers can not directly access them. This will adds a
few helpers that can be used to link the ports and partners
to the correct USB Power Delivery objects.
For ports a new optional sysfs attribute file is also added
that can be used to select the USB Power Delivery
capabilities that the port will advertise to the partner.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20220502132058.86236-3-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Introducing a small device class for USB Power Delivery.
The idea with it is that we do not mix any more USB Power
Delivery information into the USB Type-C connectors only.
This separation will make it possible to register USB Power
Delivery devices also from other places, for example from
USB Type-C Bridges (see USB Type-C Bridge Specification).
The device class will not always deal with only the messages
and objects that were negotiated with the partner, but
instead messages and objects that can be used in the
negotiation. That allows the USB PD devices to be shared and
reconfigured. The ports can decide which objects are to be
advertised to the partner before the contract is negotiated.
It is also possible to allow the user space to make that
decision if needed.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20220502132058.86236-2-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In some cases the port of an hub needs to be disabled or switched off
and on again. E.g. when the connected device needs to be re-enumerated.
Or it needs to be explicitly disabled while the rest of the usb tree
stays working.
For this purpose this patch adds an sysfs switch to enable/disable the
port on any hub. In the case the hub is supporting power switching, the
power line will be disabled to the connected device.
When the port gets disabled, the associated device gets disconnected and
removed from the logical usb tree. No further device will be enumerated
on that port until the port gets enabled again.
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20220607114522.3359148-1-m.grzeschik@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Describe it in networking/ip-sysctl.rst like other SCTP options.
Fixes: 2f5268a924 ("sctp: allow users to set netns ecn flag with sysctl")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Describe it in networking/ip-sysctl.rst like other SCTP options.
We need to document this especially as when using the feature
of User Message Interleaving, some socket options also needs
to be set.
Fixes: 463118c34a ("sctp: support sysctl to allow users to use stream interleave")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Describe it in networking/ip-sysctl.rst like other SCTP options.
Fixes: c0d8bab6ae ("sctp: add get and set sockopt for reconf_enable")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The netfs_io_request cleanup op is now always in a position to be given a
pointer to a netfs_io_request struct, so this can be passed in instead of
the mapping and private data arguments (both of which are included in the
struct).
So rename the ->cleanup op to ->free_request (to match ->init_request) and
pass in the I/O pointer.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
