Upon calling the pkey module to (re-)derive an protected
key from a secure key the PAES implementation did a retry
3 times with an 1000 ms sleep after each failure. This
patch removes this retry loop - retries should be done
if needed in a lower layer but the consumer of the pkey
module functions should not be bothered with retries.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
When processing the last block, the s390 ctr code will always read
a whole block, even if there isn't a whole block of data left. Fix
this by using the actual length left and copy it into a buffer first
for processing.
Fixes: 0200f3ecc1 ("crypto: s390 - add System z hardware support for CTR mode")
Cc: <stable@vger.kernel.org>
Reported-by: Guangwu Zhang <guazhang@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewd-by: Harald Freudenberger <freude@de.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Commit 'fa6999e326fe ("s390/pkey: support CCA and EP11 secure ECC
private keys")' introduced PKEY_TYPE_EP11_AES securekey blobs as a
supplement to the PKEY_TYPE_EP11 (which won't work in environments
with session-bound keys). This new keyblobs has a different maximum
size, so fix paes crypto module to accept also these larger keyblobs.
Fixes: fa6999e326 ("s390/pkey: support CCA and EP11 secure ECC private keys")
Signed-off-by: Holger Dengler <dengler@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
key might contain private part of the key, so better use
kfree_sensitive() to free it.
Signed-off-by: Wang Ming <machel@vivo.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Link: https://lore.kernel.org/r/20230717094533.18418-1-machel@vivo.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
This is an internal rework of the pkey code to not use the
struct pkey_protkey internal any more. This struct has a hard
coded protected key buffer with MAXPROTKEYSIZE = 64 bytes.
However, with support for ECC protected key, this limit is
too short and thus this patch reworks all the internal code
to use the triple u8 *protkey, u32 protkeylen, u32 protkeytype
instead. So the ioctl which still has to deal with this struct
coming from userspace and/or provided to userspace invoke all
the internal functions now with the triple instead of passing
a pointer to struct pkey_protkey.
Also the struct pkey_clrkey has been internally replaced in
a similar way. This struct also has a hard coded clear key
buffer of MAXCLRKEYSIZE = 32 bytes and thus is not usable with
e.g. ECC clear key material.
This is a transparent rework for userspace applications using
the pkey API. The internal kernel API used by the PAES crypto
ciphers has been adapted to this change to make it possible
to provide ECC protected keys via this interface in the future.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
xts_check_key() is obsoleted by xts_verify_key(). Over time XTS crypto
drivers adopted the newer xts_verify_key() variant, but xts_check_key()
is still used by a number of drivers. Switch drivers to use the newer
xts_verify_key() and make a couple of cleanups. This allows us to drop
xts_check_key() completely and avoid redundancy.
Signed-off-by: Vladis Dronov <vdronov@redhat.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Nicolai Stange <nstange@suse.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
A master key change on a CCA card may cause an immediately
following request to derive an protected key from a secure
key to fail with error condition 8/2290. The recommendation
from firmware is to retry with 1 second sleep.
So now the low level cca functions return -EAGAIN when this
error condition is seen and the paes retry function will
evaluate the return value. Seeing EAGAIN and running in
process context results in trying to sleep for 1 s now.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Extend the low level ep11 misc functions implementation by
several functions to support EP11 key objects for paes and pkey:
- EP11 AES secure key generation
- EP11 AES secure key generation from given clear key value
- EP11 AES secure key blob check
- findcard function returns list of apqns based on given criterias
- EP11 AES secure key derive to CPACF protected key
Extend the pkey module to be able to generate and handle EP11
secure keys and also use them as base for deriving protected
keys for CPACF usage. These ioctls are extended to support
EP11 keys: PKEY_GENSECK2, PKEY_CLR2SECK2, PKEY_VERIFYKEY2,
PKEY_APQNS4K, PKEY_APQNS4KT, PKEY_KBLOB2PROTK2.
Additionally the 'clear key' token to protected key now uses
an EP11 card if the other ways (via PCKMO, via CCA) fail.
The PAES cipher implementation needed a new upper limit for
the max key size, but is now also working with EP11 keys.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
With this patch the paes ciphers do accept AES clear key values of
size 16, 24 or 32 byte. The key value is internal rearranged to form a
paes clear key token so that the pkey kernel module recognizes and
handles this key material as source for protected keys.
Using clear key material as a source for protected keys is a security
risc as the raw key material is kept in memory. However, so the AES
selftests provided with the testmanager can be run during registration
of the paes ciphers.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
There have been some findings during Eric Biggers rework of the
paes implementation which this patch tries to address:
A very minor finding within paes ctr where when the cpacf instruction
returns with only partially data en/decrytped the walk_done() was
mistakenly done with the all data counter. Please note this can only
happen when the kmctr returns because the protected key became invalid
in the middle of the operation. And this is only with suspend and
resume on a system with different effective wrapping key.
Eric Biggers mentioned that the context struct within the tfm struct
may be shared among multiple kernel threads. So here now a rework
which uses a spinlock per context to protect the read and write of the
protected key blob value. The en/decrypt functions copy the protected
key(s) at the beginning into a param struct and do not work with the
protected key within the context any more. If the protected key in the
param struct becomes invalid, the key material is again converted to
protected key(s) and the context gets this update protected by the
spinlock. Race conditions are still possible and may result in writing
the very same protected key value more than once. So the spinlock
needs to make sure the protected key(s) within the context are
consistent updated.
The ctr page is now locked by a mutex instead of a spinlock. A similar
patch went into the aes_s390 code as a result of a complain "sleeping
function called from invalid context at ...algapi.h". See
commit 1c2c7029c0 ("s390/crypto: fix possible sleep during spinlock
aquired")' for more.
During testing with instrumented code another issue with the xts
en/decrypt function revealed. The retry cleared the running iv value
and thus let to wrong en/decrypted data.
Tested and verified with additional testcases via AF_ALG interface and
additional selftests within the kernel (which will be made available
as soon as possible).
Reported-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The CRYPTO_TFM_RES_BAD_KEY_LEN flag was apparently meant as a way to
make the ->setkey() functions provide more information about errors.
However, no one actually checks for this flag, which makes it pointless.
Also, many algorithms fail to set this flag when given a bad length key.
Reviewing just the generic implementations, this is the case for
aes-fixed-time, cbcmac, echainiv, nhpoly1305, pcrypt, rfc3686, rfc4309,
rfc7539, rfc7539esp, salsa20, seqiv, and xcbc. But there are probably
many more in arch/*/crypto/ and drivers/crypto/.
Some algorithms can even set this flag when the key is the correct
length. For example, authenc and authencesn set it when the key payload
is malformed in any way (not just a bad length), the atmel-sha and ccree
drivers can set it if a memory allocation fails, and the chelsio driver
sets it for bad auth tag lengths, not just bad key lengths.
So even if someone actually wanted to start checking this flag (which
seems unlikely, since it's been unused for a long time), there would be
a lot of work needed to get it working correctly. But it would probably
be much better to go back to the drawing board and just define different
return values, like -EINVAL if the key is invalid for the algorithm vs.
-EKEYREJECTED if the key was rejected by a policy like "no weak keys".
That would be much simpler, less error-prone, and easier to test.
So just remove this flag.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Convert the glue code for the S390 CPACF protected key implementations
of AES-ECB, AES-CBC, AES-XTS, and AES-CTR from the deprecated
"blkcipher" API to the "skcipher" API. This is needed in order for the
blkcipher API to be removed.
Note: I made CTR use the same function for encryption and decryption,
since CTR encryption and decryption are identical.
Signed-off-by: Eric Biggers <ebiggers@google.com>
reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The context used to store the key blob used a fixed 80 bytes
buffer. And all the set_key functions did not even check the given key
size. With CCA variable length AES cipher keys there come key blobs
with about 136 bytes and maybe in the future there will arise the need
to store even bigger key blobs.
This patch reworks the paes set_key functions and the context
buffers to work with small key blobs (<= 128 bytes) directly in the
context buffer and larger blobs by allocating additional memory and
storing the pointer in the context buffer. If there has been memory
allocated for storing a key blob, it also needs to be freed on release
of the tfm. So all the paes ciphers now have a init and exit function
implemented for this job.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Enhance the paes_s390 kernel module to allow the paes cipher to
accept variable length key material. The key material accepted by
the paes cipher is a key blob of various types. As of today, two
key blob types are supported: CCA secure key blobs and protected
key blobs.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The return code of cpacf_kmc() is less than the number of
bytes to process in case of an error, not greater.
The crypt routines for the other cipher modes already have
this correctly.
Cc: stable@vger.kernel.org # v4.11+
Fixes: 2793784307 ("s390/crypt: Add protected key AES module")
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Acked-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Tests with paes-xts and debugging investigations showed
that the ciphers are not always correctly resolved.
The rules for cipher priorities seem to be:
- Ecb-aes should have a prio greater than the
generic ecb-aes.
- The mode specialized ciphers (like cbc-aes-s390)
should have a prio greater than the sum of the
more generic combinations (like cbs(aes)).
This patch adjusts the cipher priorities for the
s390 aes and paes in kernel crypto implementations.
Signed-off-by: Harald Freudenberger <freude@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Now that the SPDX tag is in all arch/s390/crypto/ files, that identifies
the license in a specific and legally-defined manner. So the extra GPL
text wording can be removed as it is no longer needed at all.
This is done on a quest to remove the 700+ different ways that files in
the kernel describe the GPL license text. And there's unneeded stuff
like the address (sometimes incorrect) for the FSF which is never
needed.
No copyright headers or other non-license-description text was removed.
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
It's good to have SPDX identifiers in all files to make it easier to
audit the kernel tree for correct licenses.
Update the arch/s390/crypto/ files with the correct SPDX license
identifier based on the license text in the file itself. The SPDX
identifier is a legally binding shorthand, which can be used instead of
the full boiler plate text.
This work is based on a script and data from Thomas Gleixner, Philippe
Ombredanne, and Kate Stewart.
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
For automatic module loading (e.g. as it is used with cryptsetup)
an alias "paes" for the paes_s390 kernel module is needed.
Correct the paes_s390 module alias from "aes-all" to "paes".
Signed-off-by: Harald Freudenberger <freude@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The ctr mode of protected key aes uses the ctrblk page if the
ctrblk_lock could be acquired. If the protected key has to be
reestablished and this operation fails the unlock for the
ctrblk_lock is missing. Add it.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
This patch introduces a new in-kernel-crypto blockcipher
called 'paes' which implements AES with protected keys.
The paes blockcipher can be used similar to the aes
blockcipher but uses secure key material to derive the
working protected key and so offers an encryption
implementation where never a clear key value is exposed
in memory.
The paes module is only available for the s390 platform
providing a minimal hardware support of CPACF enabled
with at least MSA level 3. Upon module initialization
these requirements are checked.
Includes additional contribution from Harald Freudenberger.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
